Pages : 1
#1 Le 31/03/2008, à 19:59
- Antilles
[WiFi]Ubuntu 7.10, un autre probleme :p
Salut all,
J'vais pas vous surprendre en vous disant que j'ai un problem sous Ubuntu7.10 concernant le wifi (je n'arrive pas a me connecter)
Sans plus attendre je vous laisse, rencontrer et digérer ces longues lignes de codes Oo
En attendant votre réponse
Bon courage,
lspci | grep Net
01:08.0 Network controller: RaLink Wireless PCI Adapter RT2400 / RT2460
lshw -C network
WARNING: you should run this program as super-user.
*-network
description: Ethernet interface
product: nForce2 Ethernet Controller
vendor: nVidia Corporation
physical id: 4
bus info: pci@0000:00:04.0
logical name: eth0
version: a1
serial: 00:0e:a6:0c:ff:70
width: 32 bits
clock: 66MHz
capabilities: bus_master cap_list ethernet physical
configuration: broadcast=yes driver=forcedeth driverversion=0.60 latency=0 maxlatency=20 mingnt=1 module=forcedeth multicast=yes
*-network
description: Wireless interface
product: Wireless PCI Adapter RT2400 / RT2460
vendor: RaLink
physical id: 8
bus info: pci@0000:01:08.0
logical name: wmaster0
version: 00
serial: 00:08:a1:6e:68:d7
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list logical ethernet physical wireless
configuration: broadcast=yes driver=rt2400pci ip=192.168.1.13 latency=32 module=rt2400pci multicast=yes wireless=IEEE 802.11b
*-network
description: Ethernet interface
product: 3C920B-EMB Integrated Fast Ethernet Controller [Tornado]
vendor: 3Com Corporation
physical id: 1
bus info: pci@0000:02:01.0
logical name: eth1
version: 40
serial: 00:26:54:15:aa:6a
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical
configuration: broadcast=yes driver=3c59x latency=32 maxlatency=10 mingnt=10 module=3c59x multicast=yes
ifconfig
eth0 Lien encap:Ethernet HWaddr 00:0E:A6:0C:FF:70
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)
Interruption:18 Adresse de base:0x4000
eth1 Lien encap:Ethernet HWaddr 00:26:54:15:AA:6A
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)
Interruption:17 Adresse de base:0xc000
lo Lien encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:4 erreurs:0 :0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:240 (240.0 b) Octets transmis:240 (240.0 b)
wlan0 Lien encap:Ethernet HWaddr 00:08:A1:6E:68:D7
inet adr:192.168.1.13 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::208:a1ff:fe6e:68d7/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:98 erreurs:0 :0 overruns:0 frame:0
TX packets:123 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:13551 (13.2 KB) Octets transmis:20282 (19.8 KB)
wmaster0 Lien encap:UNSPEC HWaddr 00-08-A1-6E-68-D7-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11b ESSID:"F@st2ef8b5"
Mode:Managed Frequency:2.462 GHz Access Point: 00:60:B3:6D:EC:68
Retry min limit:7 RTS thr:off Fragment thr=2346 B
Link Signal level=-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
eth1 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 No scan results
lsmod
Module Size Used by
af_packet 24840 4
ipv6 273892 8
p80211 33036 0
nls_iso8859_1 5120 1
nls_cp437 6784 1
vfat 14080 1
fat 54300 1 vfat
cpufreq_userspace 5280 0
cpufreq_ondemand 9612 0
cpufreq_stats 7232 0
freq_table 5792 2 cpufreq_ondemand,cpufreq_stats
cpufreq_conservative 8072 0
cpufreq_powersave 2688 0
button 8976 0
container 5504 0
video 18060 0
ac 6148 0
sbs 19592 0
dock 10656 0
battery 11012 0
sbp2 24072 0
lp 12580 0
arc4 2944 2
ecb 4608 2
blkcipher 7556 1 ecb
rc80211_simple 6912 1
snd_usb_audio 81024 0
snd_usb_lib 17920 1 snd_usb_audio
snd_hwdep 10244 1 snd_usb_audio
snd_mpu401 9640 0
snd_mpu401_uart 9600 1 snd_mpu401
snd_seq_dummy 4740 0
sg 36764 0
rt2400pci 16768 0
rt2x00pci 11520 1 rt2400pci
rt2x00lib 19584 2 rt2400pci,rt2x00pci
rfkill 8208 1 rt2x00lib
mac80211 171016 4 rc80211_simple,rt2400pci,rt2x00pci,rt2x00lib
snd_seq_oss 33152 0
cfg80211 7304 1 mac80211
snd_intel8x0 34972 1
snd_ac97_codec 100644 1 snd_intel8x0
snd_seq_midi 9600 0
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
input_polldev 5896 1 rt2x00lib
crc_itu_t 3072 1 rt2x00lib
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44672 0
snd_mixer_oss 17664 1 snd_pcm_oss
parport_pc 37412 1
parport 37448 2 lp,parport_pc
eeprom_93cx6 3200 1 rt2400pci
snd_rawmidi 25728 3 snd_usb_lib,snd_mpu401_uart,snd_seq_midi
snd_seq 53232 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_seq_device 9228 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd_pcm 80388 4 snd_usb_audio,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 24324 2 snd_seq,snd_pcm
pcspkr 4224 0
sd_mod 30336 2
analog 13344 0
gameport 16776 1 analog
serio_raw 8068 0
xpad 9988 0
psmouse 39952 0
snd 54660 16 snd_usb_audio,snd_hwdep,snd_mpu401,snd_mpu401_uart,snd_seq_oss,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,snd_seq,snd_seq_device,snd_pcm,snd_timer
snd_page_alloc 11400 2 snd_intel8x0,snd_pcm
soundcore 8800 1 snd
shpchp 34580 0
pci_hotplug 32704 1 shpchp
i2c_nforce2 7040 0
i2c_core 26112 1 i2c_nforce2
nvidia_agp 9756 1
agpgart 35016 1 nvidia_agp
evdev 11136 4
ext3 133896 1
jbd 60456 1 ext3
mbcache 9732 1 ext3
ide_cd 32672 0
cdrom 37536 1 ide_cd
ide_disk 18560 3
ata_generic 8452 0
libata 125168 1 ata_generic
usbhid 29536 0
hid 28928 1 usbhid
usb_storage 73024 1
scsi_mod 147084 5 sbp2,sg,sd_mod,libata,usb_storage
libusual 18448 1 usb_storage
floppy 60004 0
ohci1394 36528 0
ieee1394 96312 2 sbp2,ohci1394
3c59x 46632 0
mii 6528 1 3c59x
amd74xx 15260 0 [permanent]
ide_core 116804 4 ide_cd,ide_disk,usb_storage,amd74xx
ehci_hcd 36492 0
forcedeth 51592 0
ohci_hcd 22916 0
usbcore 138632 9 snd_usb_audio,snd_usb_lib,xpad,usbhid,usb_storage,libusual,ehci_hcd,ohci_hcd
thermal 14344 0
processor 32072 1 thermal
fan 5764 0
fuse 47124 1
apparmor 40728 0
commoncap 8320 1 apparmor
dmesg | grep wlan0
[ 96.836531] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 98.850265] wlan0: Initial auth_alg=1
[ 98.850271] wlan0: authenticate with AP 00:60:b3:6d:ec:68
[ 98.853470] wlan0: RX authentication from 00:60:b3:6d:ec:68 (alg=1 transaction=2 status=0)
[ 98.853474] wlan0: replying to auth challenge
[ 98.856397] wlan0: RX authentication from 00:60:b3:6d:ec:68 (alg=1 transaction=2 status=0)
[ 98.856401] wlan0: unexpected authentication frame (alg=1 transaction=2)
[ 98.859308] wlan0: RX authentication from 00:60:b3:6d:ec:68 (alg=1 transaction=2 status=0)
[ 98.859312] wlan0: unexpected authentication frame (alg=1 transaction=2)
[ 98.934264] wlan0: RX authentication from 00:60:b3:6d:ec:68 (alg=1 transaction=4 status=0)
[ 98.934270] wlan0: authenticated
[ 98.934273] wlan0: associate with AP 00:60:b3:6d:ec:68
[ 98.939894] wlan0: authentication frame received from 00:60:b3:6d:ec:68, but not in authenticate state - ignored
[ 99.044610] wlan0: RX AssocResp from 00:60:b3:6d:ec:68 (capab=0x1 status=0 aid=1)
[ 99.044615] wlan0: associated
[ 99.044819] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 99.045780] wlan0: association frame received from 00:60:b3:6d:ec:68, but not in associate state - ignored
[ 99.442423] wlan0: duplicate address detected!
[ 103.435248] wlan0: RX WEP frame, decrypt failed
[ 105.423472] wlan0: RX WEP frame, decrypt failed
[ 107.415143] wlan0: RX WEP frame, decrypt failed
[ 107.429123] wlan0: RX WEP frame, decrypt failed
[ 109.419916] wlan0: RX WEP frame, decrypt failed
[ 116.412929] wlan0: RX WEP frame, decrypt failed
[ 117.415560] wlan0: RX WEP frame, decrypt failed
[ 125.442727] wlan0: RX WEP frame, decrypt failed
[ 127.411091] wlan0: RX WEP frame, decrypt failed
[ 144.076236] wlan0: disassociate(reason=3)
[ 145.019271] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 153.849699] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 156.925701] wlan0: Initial auth_alg=1
[ 156.925707] wlan0: authenticate with AP 00:60:b3:6d:ec:68
[ 156.929609] wlan0: RX authentication from 00:60:b3:6d:ec:68 (alg=1 transaction=2 status=0)
[ 156.929615] wlan0: replying to auth challenge
[ 157.065678] wlan0: RX authentication from 00:60:b3:6d:ec:68 (alg=1 transaction=4 status=0)
[ 157.065683] wlan0: authenticated
[ 157.065686] wlan0: associate with AP 00:60:b3:6d:ec:68
[ 157.158990] wlan0: RX AssocResp from 00:60:b3:6d:ec:68 (capab=0x1 status=0 aid=1)
[ 157.158995] wlan0: associated
[ 157.159154] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 157.583511] wlan0: duplicate address detected!
[ 161.473662] wlan0: RX WEP frame, decrypt failed
[ 163.393966] wlan0: RX WEP frame, decrypt failed
[ 164.747428] wlan0: RX WEP frame, decrypt failed
[ 167.409876] wlan0: RX WEP frame, decrypt failed
[ 169.391825] wlan0: RX WEP frame, decrypt failed
[ 170.583097] wlan0: RX WEP frame, decrypt failed
[ 178.464865] wlan0: RX WEP frame, decrypt failed
[ 180.384592] wlan0: RX WEP frame, decrypt failed
[ 186.379215] wlan0: RX WEP frame, decrypt failed
[ 186.449338] wlan0: RX WEP frame, decrypt failed
[ 188.383804] wlan0: RX WEP frame, decrypt failed
[ 192.589593] wlan0: RX WEP frame, decrypt failed
[ 258.383779] wlan0: disassociate(reason=3)
[ 259.630610] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 261.629598] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 263.628603] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 265.627614] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 267.626624] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 269.625636] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 289.039207] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 291.135351] wlan0: Initial auth_alg=1
[ 291.135357] wlan0: authenticate with AP 00:60:b3:6d:ec:68
[ 291.138190] wlan0: RX authentication from 00:60:b3:6d:ec:68 (alg=1 transaction=2 status=0)
[ 291.138194] wlan0: replying to auth challenge
[ 291.236782] wlan0: RX authentication from 00:60:b3:6d:ec:68 (alg=1 transaction=4 status=0)
[ 291.236786] wlan0: authenticated
[ 291.236790] wlan0: associate with AP 00:60:b3:6d:ec:68
[ 291.330278] wlan0: RX AssocResp from 00:60:b3:6d:ec:68 (capab=0x1 status=0 aid=1)
[ 291.330281] wlan0: associated
[ 291.330441] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 292.288484] wlan0: duplicate address detected!
[ 294.643792] wlan0: RX WEP frame, decrypt failed
[ 296.561995] wlan0: RX WEP frame, decrypt failed
[ 298.942115] wlan0: RX WEP frame, decrypt failed
[ 301.399583] wlan0: RX WEP frame, decrypt failed
[ 303.323675] wlan0: RX WEP frame, decrypt failed
[ 309.316069] wlan0: RX WEP frame, decrypt failed
[ 309.383550] wlan0: RX WEP frame, decrypt failed
[ 311.319991] wlan0: RX WEP frame, decrypt failed
[ 317.311650] wlan0: RX WEP frame, decrypt failed
[ 317.368156] wlan0: RX WEP frame, decrypt failed
[ 319.316375] wlan0: RX WEP frame, decrypt failed
[ 325.555522] wlan0: RX WEP frame, decrypt failed
[ 334.298050] wlan0: disassociate(reason=3)
[ 335.305147] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 346.110568] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 394.840008] wlan0: Initial auth_alg=1
[ 394.840014] wlan0: authenticate with AP 00:60:b3:6d:ec:68
[ 394.843838] wlan0: RX authentication from 00:60:b3:6d:ec:68 (alg=1 transaction=2 status=0)
[ 394.843842] wlan0: replying to auth challenge
[ 394.950643] wlan0: RX authentication from 00:60:b3:6d:ec:68 (alg=1 transaction=4 status=0)
[ 394.950649] wlan0: authenticated
[ 394.950652] wlan0: associate with AP 00:60:b3:6d:ec:68
[ 395.085723] wlan0: RX AssocResp from 00:60:b3:6d:ec:68 (capab=0x1 status=0 aid=1)
[ 395.085728] wlan0: associated
[ 395.085896] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 395.569389] wlan0: duplicate address detected!
[ 401.302889] wlan0: RX WEP frame, decrypt failed
[ 403.276556] wlan0: RX WEP frame, decrypt failed
[ 404.268878] wlan0: RX WEP frame, decrypt failed
[ 404.281607] wlan0: RX WEP frame, decrypt failed
[ 406.272650] wlan0: RX WEP frame, decrypt failed
[ 410.266772] wlan0: RX WEP frame, decrypt failed
[ 413.483819] wlan0: duplicate address detected!
[ 413.687665] wlan0: RX WEP frame, decrypt failed
[ 413.895267] wlan0: RX WEP frame, decrypt failed
[ 414.097042] wlan0: RX WEP frame, decrypt failed
[ 418.897977] wlan0: RX WEP frame, decrypt failed
[ 419.010040] wlan0: RX WEP frame, decrypt failed
[ 424.015730] wlan0: RX WEP frame, decrypt failed
[ 425.013353] wlan0: RX WEP frame, decrypt failed
[ 426.015754] wlan0: RX WEP frame, decrypt failed
[ 427.011861] wlan0: RX WEP frame, decrypt failed
[ 434.908610] wlan0: RX WEP frame, decrypt failed
[ 435.100801] wlan0: RX WEP frame, decrypt failed
[ 440.924128] wlan0: RX WEP frame, decrypt failed
[ 445.854590] wlan0: RX WEP frame, decrypt failed
[ 446.853823] wlan0: RX WEP frame, decrypt failed
[ 447.738443] wlan0: RX WEP frame, decrypt failed
[ 447.852999] wlan0: RX WEP frame, decrypt failed
[ 452.697134] wlan0: RX WEP frame, decrypt failed
[ 452.956184] wlan0: RX WEP frame, decrypt failed
[ 457.895268] wlan0: RX WEP frame, decrypt failed
[ 462.893770] wlan0: RX WEP frame, decrypt failed
[ 467.890965] wlan0: RX WEP frame, decrypt failed
[ 472.905543] wlan0: RX WEP frame, decrypt failed
[ 477.911771] wlan0: RX WEP frame, decrypt failed
[ 482.845546] wlan0: RX WEP frame, decrypt failed
[ 482.965327] wlan0: RX WEP frame, decrypt failed
[ 483.843483] wlan0: RX WEP frame, decrypt failed
[ 484.846012] wlan0: RX WEP frame, decrypt failed
[ 487.846865] wlan0: RX WEP frame, decrypt failed
[ 487.898939] wlan0: RX WEP frame, decrypt failed
[ 488.921760] wlan0: RX WEP frame, decrypt failed
[ 489.087214] wlan0: RX WEP frame, decrypt failed
[ 494.052794] wlan0: RX WEP frame, decrypt failed
[ 499.054406] wlan0: RX WEP frame, decrypt failed
[ 504.045090] wlan0: RX WEP frame, decrypt failed
Hors ligne
#2 Le 01/04/2008, à 20:01
- Antilles
Re : [WiFi]Ubuntu 7.10, un autre probleme :p
Up
Hors ligne
#3 Le 01/04/2008, à 20:12
- willy78
Re : [WiFi]Ubuntu 7.10, un autre probleme :p
Le driver natif de Gutsy s'appel rt2400pci mais il cause pas mal de déconnexion!
Installation des driver de serialmonkey donc voila un mini tuto (connections par ethernet obligatoire):
sudo apt-get update
sudo apt-get install build-essential linux-headers-$(uname -r)
cd
mkdir rt2400
cd rt2400
wget http://rt2x00.serialmonkey.com/rt2400-cvs-daily.tar.gz
tar -zxvf rt2400-cvs-daily.tar.gz
cd rt2400-cvs*/Module
make
A ce stade le driver est compiler,
Maintenant il faut l'installer mais avant il faut décharger l'ancien (rt2400pci)
sudo ifconfig wlan0 down
sudo modprobe -r rt2400pci
echo 'blacklist rt2400pci' | sudo tee -a /etc/modprobe.d/blacklist
On installe le driver fraichement compilé!
sudo make install
echo 'rt2400' | sudo tee -a /etc/modules
Il faut éditer le fichier pour donner les paramètres de connections
sudo gedit /etc/network/interfaces #remplacer gedit par kwrite si tu es sous kubuntu
Placer ces lignes
en WEP hexa
auto wlan0
iface wlan0 inet dhcp
wireless-essid le_SSID_Du_rezo
wireless-key La_clé_en_hexa
en WPAPSK TKIP
auto wlan0
iface wlan0 inet dhcp
pre-up iwconfig wlan0 essid "mon ssid"
pre-up iwpriv wlan0 set AuthMode=WPAPSK
pre-up iwpriv wlan0 set EncrypType=TKIP
pre-up iwpriv wlan0 set WPAPSK="Ma_cle_WPA_Ultra_Secrete_que_y'a_que_moi_qui_sais"
rebooter et tester si la connexion est effective
Quelques tutos pour le wifi sous Ubuntu:
http://wlety.free.fr/forum
Hors ligne
#4 Le 01/04/2008, à 21:04
- Antilles
Re : [WiFi]Ubuntu 7.10, un autre probleme :p
Le probleme c'est que je n'a pas les moyens d'avoir une connexion eathernet. Pour en obtenir une je peus me connecté à partir du modem?
Sinon la seule solution c'est d'atendre des MaJ non?
Hors ligne
#5 Le 08/04/2008, à 15:14
- Antilles
Re : [WiFi]Ubuntu 7.10, un autre probleme :p
Installation des driver de serialmonkey
Je devrais faire des modification sous windows pour me connecter à internet?
Hors ligne
#6 Le 08/04/2008, à 15:47
- Xheyther
Re : [WiFi]Ubuntu 7.10, un autre probleme :p
Installation des driver de serialmonkey
Je devrais faire des modification sous windows pour me connecter à internet?
Non pas de modification sous windows.
Sans ethernet il faut que tu remplaces ces lignes :
sudo apt-get update
sudo apt-get install build-essential linux-headers-$(uname -r)
cd
mkdir rt2400
cd rt2400
wget http://rt2x00.serialmonkey.com/rt2400-cvs-daily.tar.gz
tar -zxvf rt2400-cvs-daily.tar.gz
cd rt2400-cvs*/Module
make
Par les manip suivante (que quelqu'un me corrige si je me trompe !!) :
dans ta console :
uname -r
et tu note le résultat *EXACT*.
Puis tu vas ici (avec ton windows par exemple) : http://packages.ubuntu.com/gutsy/
et tu recherches les packages
build-essential
linux-headers-le_résultat_de_la_commande_uname -r
Tu en profite pour télécharger ceci : http://rt2x00.serialmonkey.com/rt2400-cvs-daily.tar.gz
Tu rapatries le tout sous ubuntu (clé usb ou autre)
Tu installes les paquets build essential et les linux-headers (voir ici pour savoir comment installer un paquet).
Ensuite dans l'idéal tu déplaces dans ton répertoire home le fichier rt2400-cvs-daily.tar.gz
Et, dans une console tu tape s
tar -zxvf rt2400-cvs-daily.tar.gz
cd rt2400-cvs*/Module
make
Et tu peux poursuivre comme te l'as indiqué Willy.
A priori je ne me suis pas planté
Hors ligne
#7 Le 08/04/2008, à 16:53
- Antilles
Re : [WiFi]Ubuntu 7.10, un autre probleme :p
Je n'arrive même pas a me connecter en ethernet....
j'ai tellement esseyé de choses comment retablir s'il vous plais?
Hors ligne
#8 Le 08/04/2008, à 20:46
- willy78
Re : [WiFi]Ubuntu 7.10, un autre probleme :p
pour te reconnecter automatiquement en ethernet:
echo -e 'auto lo\niface lo inet loopback\n' | sudo tee /etc/network/interfaces
Quelques tutos pour le wifi sous Ubuntu:
http://wlety.free.fr/forum
Hors ligne
#9 Le 09/04/2008, à 09:55
- Antilles
Re : [WiFi]Ubuntu 7.10, un autre probleme :p
J'arrive a me connecter, j'ai suivi les manip de wily mais sa ne marche pas même après reboot et plusieurs tentatives
Hors ligne
#10 Le 09/04/2008, à 12:32
- willy78
Re : [WiFi]Ubuntu 7.10, un autre probleme :p
si tu arrive a te connecter fais donc le tuto
pour une connexion manuelle en ethernet
sudo ifconfig eth0 up
sudo dhclient eth0
Quelques tutos pour le wifi sous Ubuntu:
http://wlety.free.fr/forum
Hors ligne
Pages : 1