#1 Le 28/04/2014, à 08:19
- omega13
Affichage réduit avec UG 14.04 et NVidia GTX 780
Bonjour,
Hier j'ai procédé à une installation neuve de Ubuntu Gnome 14.04.
Comme d'habitude depuis maintenant plusieurs années une soucis d'affichage apparaît au premier démarrage.
J'ai donc procéder à l’installation des drivers NVIDIA et là rien ne s'améliore. Je m'explique, l’écran de résolution 1920*1080 reste extrêmement "zoomer" comme si la résolution était seulement d'un quart de l’écran (d’ailleurs Totem ne lit la vidéo en plein écran que sur le quart en bas à gauche de l'écran).
Cependant que ce soit le Nvidia center ou l'option Ecran d'Ubuntu, ils me présentent tout deux mon 32 pouces en résolution de 1920*1080 comme si tout allait bien.
Carte : Nvidia 780 GTX
OS : Ubuntu Gnome 14.04 installation neuve
Essai à ce jour sans résultat :
- Pilote nouveau
- Pilote 311 Prop dépôt
- Pilote 319 Prop dépôt
- Pilote 331 Prop dépôt
- Pilote 331.48 Par le .run Nvidia
- Pilote 331.67 (le dernier) par le .run Nvidia
Autant vous dire que je n'ai jamais eu autant de soucis depuis Feisty c'est pour dire 
Voilà si quelqu'un a une idée sachant que cette carte est quasi neuve et fonctionnait très bien sous la 13.10.
Cordialement
Dernière modification par omega13 (Le 28/04/2014, à 08:22)
Gnome Ubuntu 16.04
Hors ligne
#2 Le 28/04/2014, à 10:04
- GP974
Re : Affichage réduit avec UG 14.04 et NVidia GTX 780
Bonjour
Tu peut essayer un drivers plus recent
sudo add-apt-repository ppa:xorg-edgers/ppa
sudo apt update
sudo apt-get purge nvidia*
sudo apt install nvidia-337
sudo rebootHors ligne
#3 Le 28/04/2014, à 12:13
- omega13
Re : Affichage réduit avec UG 14.04 et NVidia GTX 780
Merci je ne connaissais pas ce PPA.
Vais tester cela ce soir!
Gnome Ubuntu 16.04
Hors ligne
#4 Le 28/04/2014, à 19:10
- omega13
Re : Affichage réduit avec UG 14.04 et NVidia GTX 780
Bon ben pas d'amélioration malgré les derniers drivers.
Toujours cet effet quart d'écran utilisé pas plus ....
Si quelqu’un a une autre idée
Gnome Ubuntu 16.04
Hors ligne
#5 Le 28/04/2014, à 20:41
- omega13
Re : Affichage réduit avec UG 14.04 et NVidia GTX 780
Au cas ou ca aide quelqu'un
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: db000000-dc0fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000a9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at dc120000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 55
Region 0: Memory at dc13b000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-V [8086:153b] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:859f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 53
Region 0: Memory at dc100000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at dc139000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f040 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc138000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:855f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 56
Region 0: Memory at dc130000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 [8086:8c12] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dca00000-dcafffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=0c, sec-latency=0
I/O behind bridge: 0000b000-0000cfff
Memory behind bridge: dc200000-dc8fffff
Prefetchable memory behind bridge: 00000000aa100000-00000000aa1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 [8086:8c18] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Bus: primary=00, secondary=0d, subordinate=77, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: ac000000-da0fffff
Prefetchable memory behind bridge: 0000000050000000-0000000099ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dc137000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation Z87 Express LPC Controller [8086:8c44] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 50
Region 0: I/O ports at f090 [size=8]
Region 1: I/O ports at f080 [size=4]
Region 2: I/O ports at f070 [size=8]
Region 3: I/O ports at f060 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at dc136000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 14
Region 0: Memory at dc135000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK110 [GeForce GTX 780] [10de:1004] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8469]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 57
Region 0: Memory at db000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at a0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at a8000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
[virtual] Expansion ROM at dc000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation GK110 HDMI Audio [10de:0e1a] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8469]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at dc080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
03:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:858d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 52
Region 0: I/O ports at d050 [size=8]
Region 1: I/O ports at d040 [size=4]
Region 2: I/O ports at d030 [size=8]
Region 3: I/O ports at d020 [size=4]
Region 4: I/O ports at d000 [size=32]
Region 5: Memory at dca00000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
04:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at dc800000 (32-bit, non-prefetchable) [size=128K]
Bus: primary=04, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 0000b000-0000cfff
Memory behind bridge: dc200000-dc7fffff
Prefetchable memory behind bridge: 00000000aa100000-00000000aa1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:01.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:04.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:05.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dc700000-dc7fffff
Prefetchable memory behind bridge: 00000000aa100000-00000000aa1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:06.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:07.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: dc200000-dc4fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:08.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:09.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: dc600000-dc6fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 11)
Subsystem: ASUSTeK Computer Inc. Device [1043:859e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at dc700000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at aa100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
0a:00.0 Network controller [0280]: Broadcom Corporation BCM4352 802.11ac Wireless Network Adapter [14e4:43b1] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:855c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at dc400000 (64-bit, non-prefetchable) [size=32K]
Region 2: Memory at dc200000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: wl
0c:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:858d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 54
Region 0: I/O ports at b050 [size=8]
Region 1: I/O ports at b040 [size=4]
Region 2: I/O ports at b030 [size=8]
Region 3: I/O ports at b020 [size=4]
Region 4: I/O ports at b000 [size=32]
Region 5: Memory at dc600000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahciGnome Ubuntu 16.04
Hors ligne
#6 Le 28/04/2014, à 21:20
- omega13
Re : Affichage réduit avec UG 14.04 et NVidia GTX 780
et mon Xorg.0.log
[ 2.459]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 2.459] X Protocol Version 11, Revision 0
[ 2.459] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 2.459] Current Operating System: Linux omega13-desktop 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64
[ 2.459] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=2f5e70f7-85cb-4101-b52a-e47798b94eb2 ro quiet splash vt.handoff=7
[ 2.459] Build Date: 16 April 2014 01:36:29PM
[ 2.459] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support)
[ 2.459] Current version of pixman: 0.30.2
[ 2.459] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.459] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.459] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 28 20:38:42 2014
[ 2.459] (==) Using config file: "/etc/X11/xorg.conf"
[ 2.459] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2.460] (==) ServerLayout "Layout0"
[ 2.460] (**) |-->Screen "Screen0" (0)
[ 2.460] (**) | |-->Monitor "Monitor0"
[ 2.460] (**) | |-->Device "Device0"
[ 2.460] (**) |-->Input Device "Keyboard0"
[ 2.460] (**) |-->Input Device "Mouse0"
[ 2.460] (**) Option "Xinerama" "0"
[ 2.460] (==) Automatically adding devices
[ 2.460] (==) Automatically enabling devices
[ 2.460] (==) Automatically adding GPU devices
[ 2.460] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 2.460] Entry deleted from font path.
[ 2.460] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 2.460] Entry deleted from font path.
[ 2.460] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 2.460] Entry deleted from font path.
[ 2.460] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 2.460] Entry deleted from font path.
[ 2.460] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 2.460] Entry deleted from font path.
[ 2.460] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 2.460] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 2.460] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2.460] (WW) Disabling Keyboard0
[ 2.460] (WW) Disabling Mouse0
[ 2.460] (II) Loader magic: 0x7f119676ad60
[ 2.460] (II) Module ABI versions:
[ 2.460] X.Org ANSI C Emulation: 0.4
[ 2.460] X.Org Video Driver: 15.0
[ 2.460] X.Org XInput driver : 20.0
[ 2.460] X.Org Server Extension : 8.0
[ 2.460] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2.462] (--) PCI:*(0:1:0:0) 10de:1004:1043:8469 rev 161, Mem @ 0xdb000000/16777216, 0xa0000000/134217728, 0xa8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 2.462] Initializing built-in extension Generic Event Extension
[ 2.462] Initializing built-in extension SHAPE
[ 2.462] Initializing built-in extension MIT-SHM
[ 2.462] Initializing built-in extension XInputExtension
[ 2.462] Initializing built-in extension XTEST
[ 2.462] Initializing built-in extension BIG-REQUESTS
[ 2.462] Initializing built-in extension SYNC
[ 2.462] Initializing built-in extension XKEYBOARD
[ 2.462] Initializing built-in extension XC-MISC
[ 2.462] Initializing built-in extension SECURITY
[ 2.462] Initializing built-in extension XINERAMA
[ 2.462] Initializing built-in extension XFIXES
[ 2.462] Initializing built-in extension RENDER
[ 2.462] Initializing built-in extension RANDR
[ 2.462] Initializing built-in extension COMPOSITE
[ 2.462] Initializing built-in extension DAMAGE
[ 2.462] Initializing built-in extension MIT-SCREEN-SAVER
[ 2.462] Initializing built-in extension DOUBLE-BUFFER
[ 2.462] Initializing built-in extension RECORD
[ 2.462] Initializing built-in extension DPMS
[ 2.462] Initializing built-in extension Present
[ 2.462] Initializing built-in extension DRI3
[ 2.462] Initializing built-in extension X-Resource
[ 2.462] Initializing built-in extension XVideo
[ 2.462] Initializing built-in extension XVideo-MotionCompensation
[ 2.462] Initializing built-in extension SELinux
[ 2.462] Initializing built-in extension XFree86-VidModeExtension
[ 2.462] Initializing built-in extension XFree86-DGA
[ 2.462] Initializing built-in extension XFree86-DRI
[ 2.462] Initializing built-in extension DRI2
[ 2.462] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 2.462] (II) "glx" will be loaded by default.
[ 2.462] (WW) "xmir" is not to be loaded by default. Skipping.
[ 2.462] (II) LoadModule: "glx"
[ 2.462] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 2.485] (II) Module glx: vendor="NVIDIA Corporation"
[ 2.485] compiled for 4.0.2, module version = 1.0.0
[ 2.485] Module class: X.Org Server Extension
[ 2.485] (II) NVIDIA GLX Module 337.12 Fri Apr 4 14:34:00 PDT 2014
[ 2.486] Loading extension GLX
[ 2.486] (II) LoadModule: "nvidia"
[ 2.486] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 2.487] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2.487] compiled for 4.0.2, module version = 1.0.0
[ 2.487] Module class: X.Org Video Driver
[ 2.487] (II) NVIDIA dlloader X Driver 337.12 Fri Apr 4 14:13:45 PDT 2014
[ 2.487] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2.487] (++) using VT number 7
[ 2.488] (II) Loading sub module "fb"
[ 2.488] (II) LoadModule: "fb"
[ 2.488] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2.488] (II) Module fb: vendor="X.Org Foundation"
[ 2.488] compiled for 1.15.1, module version = 1.0.0
[ 2.488] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.488] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 2.488] (II) Loading sub module "wfb"
[ 2.488] (II) LoadModule: "wfb"
[ 2.488] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2.489] (II) Module wfb: vendor="X.Org Foundation"
[ 2.489] compiled for 1.15.1, module version = 1.0.0
[ 2.489] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.489] (II) Loading sub module "ramdac"
[ 2.489] (II) LoadModule: "ramdac"
[ 2.489] (II) Module "ramdac" already built-in
[ 2.489] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 2.489] (==) NVIDIA(0): RGB weight 888
[ 2.489] (==) NVIDIA(0): Default visual is TrueColor
[ 2.489] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2.489] (**) NVIDIA(0): Option "Stereo" "0"
[ 2.489] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-3"
[ 2.489] (**) NVIDIA(0): Option "SLI" "Off"
[ 2.489] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 2.489] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 2.489] (**) NVIDIA(0): Stereo disabled by request
[ 2.489] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 2.489] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 2.489] (**) NVIDIA(0): Option "MetaModes" "1920x1080 +0+0"
[ 2.489] (**) NVIDIA(0): Enabling 2D acceleration
[ 3.464] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 3.465] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 780 (GK110) at PCI:1:0:0 (GPU-0)
[ 3.465] (--) NVIDIA(0): Memory: 3145728 kBytes
[ 3.465] (--) NVIDIA(0): VideoBIOS: 80.10.3a.00.13
[ 3.465] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 3.468] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 780 at PCI:1:0:0
[ 3.468] (--) NVIDIA(0): CRT-0
[ 3.468] (--) NVIDIA(0): DFP-0
[ 3.468] (--) NVIDIA(0): DFP-1
[ 3.468] (--) NVIDIA(0): DFP-2
[ 3.468] (--) NVIDIA(0): SAMSUNG (DFP-3) (boot, connected)
[ 3.468] (--) NVIDIA(0): DFP-4
[ 3.468] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 3.468] (--) NVIDIA(0): DFP-0: Internal TMDS
[ 3.468] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 3.468] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 3.468] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 3.468] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 3.468] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 3.468] (--) NVIDIA(0): SAMSUNG (DFP-3): Internal TMDS
[ 3.468] (--) NVIDIA(GPU-0): SAMSUNG (DFP-3): 330.0 MHz maximum pixel clock
[ 3.468] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 3.468] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 3.468] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3.468] (**) NVIDIA(0): device SAMSUNG (DFP-3) (Using EDID frequencies has been
[ 3.468] (**) NVIDIA(0): enabled on all display devices.)
[ 3.469] (II) NVIDIA(0): Validated MetaModes:
[ 3.469] (II) NVIDIA(0): "1920x1080+0+0"
[ 3.469] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 3.497] (--) NVIDIA(0): DPI set to (69, 70); computed from "UseEdidDpi" X config
[ 3.497] (--) NVIDIA(0): option
[ 3.497] (--) Depth 24 pixmap format is 32 bpp
[ 3.497] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 3.497] (II) NVIDIA: access.
[ 3.502] (II) NVIDIA(0): Setting mode "1920x1080+0+0"
[ 3.539] Loading extension NV-GLX
[ 3.559] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 3.559] (==) NVIDIA(0): Backing store enabled
[ 3.559] (==) NVIDIA(0): Silken mouse enabled
[ 3.559] (**) NVIDIA(0): DPMS enabled
[ 3.559] Loading extension NV-CONTROL
[ 3.559] Loading extension XINERAMA
[ 3.559] (II) Loading sub module "dri2"
[ 3.559] (II) LoadModule: "dri2"
[ 3.559] (II) Module "dri2" already built-in
[ 3.559] (II) NVIDIA(0): [DRI2] Setup complete
[ 3.559] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 3.559] (--) RandR disabled
[ 3.562] (II) SELinux: Disabled on system
[ 3.562] (II) Initializing extension GLX
[ 3.569] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 3.570] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 3.570] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.570] (II) LoadModule: "evdev"
[ 3.570] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3.571] (II) Module evdev: vendor="X.Org Foundation"
[ 3.571] compiled for 1.15.0, module version = 2.8.2
[ 3.571] Module class: X.Org XInput Driver
[ 3.571] ABI class: X.Org XInput driver, version 20.0
[ 3.571] (II) Using input driver 'evdev' for 'Power Button'
[ 3.571] (**) Power Button: always reports core events
[ 3.571] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 3.571] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.571] (--) evdev: Power Button: Found keys
[ 3.571] (II) evdev: Power Button: Configuring as keyboard
[ 3.571] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 3.571] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3.571] (**) Option "xkb_rules" "evdev"
[ 3.571] (**) Option "xkb_model" "pc105"
[ 3.571] (**) Option "xkb_layout" "fr"
[ 3.571] (**) Option "xkb_variant" "latin9"
[ 3.572] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[ 3.572] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 3.572] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.572] (II) Using input driver 'evdev' for 'Power Button'
[ 3.572] (**) Power Button: always reports core events
[ 3.572] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 3.572] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.572] (--) evdev: Power Button: Found keys
[ 3.572] (II) evdev: Power Button: Configuring as keyboard
[ 3.572] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 3.572] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 3.572] (**) Option "xkb_rules" "evdev"
[ 3.572] (**) Option "xkb_model" "pc105"
[ 3.572] (**) Option "xkb_layout" "fr"
[ 3.572] (**) Option "xkb_variant" "latin9"
[ 3.572] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3.572] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 3.572] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 3.572] (II) No input driver specified, ignoring this device.
[ 3.572] (II) This device may have been added with another device file.
[ 3.572] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 3.572] (II) No input driver specified, ignoring this device.
[ 3.572] (II) This device may have been added with another device file.
[ 3.572] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[ 3.573] (II) No input driver specified, ignoring this device.
[ 3.573] (II) This device may have been added with another device file.
[ 3.573] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[ 3.573] (II) No input driver specified, ignoring this device.
[ 3.573] (II) This device may have been added with another device file.
[ 3.573] (II) config/udev: Adding input device Logitech Logitech BT Mini-Receiver (/dev/input/event15)
[ 3.573] (**) Logitech Logitech BT Mini-Receiver: Applying InputClass "evdev keyboard catchall"
[ 3.573] (II) Using input driver 'evdev' for 'Logitech Logitech BT Mini-Receiver'
[ 3.573] (**) Logitech Logitech BT Mini-Receiver: always reports core events
[ 3.573] (**) evdev: Logitech Logitech BT Mini-Receiver: Device: "/dev/input/event15"
[ 3.573] (--) evdev: Logitech Logitech BT Mini-Receiver: Vendor 0x46d Product 0xc71b
[ 3.573] (--) evdev: Logitech Logitech BT Mini-Receiver: Found keys
[ 3.573] (II) evdev: Logitech Logitech BT Mini-Receiver: Configuring as keyboard
[ 3.573] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.2/3-13.2:1.0/input/input18/event15"
[ 3.573] (II) XINPUT: Adding extended input device "Logitech Logitech BT Mini-Receiver" (type: KEYBOARD, id 8)
[ 3.573] (**) Option "xkb_rules" "evdev"
[ 3.573] (**) Option "xkb_model" "pc105"
[ 3.573] (**) Option "xkb_layout" "fr"
[ 3.573] (**) Option "xkb_variant" "latin9"
[ 3.573] (II) config/udev: Adding input device Logitech Logitech BT Mini-Receiver (/dev/input/event16)
[ 3.573] (**) Logitech Logitech BT Mini-Receiver: Applying InputClass "evdev pointer catchall"
[ 3.573] (**) Logitech Logitech BT Mini-Receiver: Applying InputClass "evdev keyboard catchall"
[ 3.573] (II) Using input driver 'evdev' for 'Logitech Logitech BT Mini-Receiver'
[ 3.573] (**) Logitech Logitech BT Mini-Receiver: always reports core events
[ 3.573] (**) evdev: Logitech Logitech BT Mini-Receiver: Device: "/dev/input/event16"
[ 3.573] (--) evdev: Logitech Logitech BT Mini-Receiver: Vendor 0x46d Product 0xc71c
[ 3.573] (--) evdev: Logitech Logitech BT Mini-Receiver: Found 16 mouse buttons
[ 3.573] (--) evdev: Logitech Logitech BT Mini-Receiver: Found scroll wheel(s)
[ 3.573] (--) evdev: Logitech Logitech BT Mini-Receiver: Found relative axes
[ 3.573] (--) evdev: Logitech Logitech BT Mini-Receiver: Found x and y relative axes
[ 3.573] (--) evdev: Logitech Logitech BT Mini-Receiver: Found absolute axes
[ 3.573] (II) evdev: Logitech Logitech BT Mini-Receiver: Forcing absolute x/y axes to exist.
[ 3.573] (--) evdev: Logitech Logitech BT Mini-Receiver: Found keys
[ 3.573] (II) evdev: Logitech Logitech BT Mini-Receiver: Configuring as mouse
[ 3.573] (II) evdev: Logitech Logitech BT Mini-Receiver: Configuring as keyboard
[ 3.573] (II) evdev: Logitech Logitech BT Mini-Receiver: Adding scrollwheel support
[ 3.573] (**) evdev: Logitech Logitech BT Mini-Receiver: YAxisMapping: buttons 4 and 5
[ 3.573] (**) evdev: Logitech Logitech BT Mini-Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3.573] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.3/3-13.3:1.0/input/input19/event16"
[ 3.573] (II) XINPUT: Adding extended input device "Logitech Logitech BT Mini-Receiver" (type: KEYBOARD, id 9)
[ 3.573] (**) Option "xkb_rules" "evdev"
[ 3.573] (**) Option "xkb_model" "pc105"
[ 3.573] (**) Option "xkb_layout" "fr"
[ 3.573] (**) Option "xkb_variant" "latin9"
[ 3.574] (II) evdev: Logitech Logitech BT Mini-Receiver: initialized for relative axes.
[ 3.574] (WW) evdev: Logitech Logitech BT Mini-Receiver: ignoring absolute axes.
[ 3.574] (**) Logitech Logitech BT Mini-Receiver: (accel) keeping acceleration scheme 1
[ 3.574] (**) Logitech Logitech BT Mini-Receiver: (accel) acceleration profile 0
[ 3.574] (**) Logitech Logitech BT Mini-Receiver: (accel) acceleration factor: 2.000
[ 3.574] (**) Logitech Logitech BT Mini-Receiver: (accel) acceleration threshold: 4
[ 3.574] (II) config/udev: Adding input device Logitech Logitech BT Mini-Receiver (/dev/input/mouse0)
[ 3.574] (II) No input driver specified, ignoring this device.
[ 3.574] (II) This device may have been added with another device file.
[ 3.574] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event4)
[ 3.574] (II) No input driver specified, ignoring this device.
[ 3.574] (II) This device may have been added with another device file.
[ 3.574] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event3)
[ 3.574] (II) No input driver specified, ignoring this device.
[ 3.574] (II) This device may have been added with another device file.
[ 3.574] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event2)
[ 3.574] (II) No input driver specified, ignoring this device.
[ 3.574] (II) This device may have been added with another device file.
[ 3.574] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[ 3.574] (II) No input driver specified, ignoring this device.
[ 3.574] (II) This device may have been added with another device file.
[ 3.574] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[ 3.574] (II) No input driver specified, ignoring this device.
[ 3.574] (II) This device may have been added with another device file.
[ 3.574] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[ 3.574] (II) No input driver specified, ignoring this device.
[ 3.574] (II) This device may have been added with another device file.
[ 3.575] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event6)
[ 3.575] (II) No input driver specified, ignoring this device.
[ 3.575] (II) This device may have been added with another device file.
[ 3.575] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event5)
[ 3.575] (II) No input driver specified, ignoring this device.
[ 3.575] (II) This device may have been added with another device file.
[ 3.575] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event10)
[ 3.575] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 3.575] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 3.575] (**) Eee PC WMI hotkeys: always reports core events
[ 3.575] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event10"
[ 3.575] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 3.575] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 3.575] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 3.575] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input13/event10"
[ 3.575] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 10)
[ 3.575] (**) Option "xkb_rules" "evdev"
[ 3.575] (**) Option "xkb_model" "pc105"
[ 3.575] (**) Option "xkb_layout" "fr"
[ 3.575] (**) Option "xkb_variant" "latin9"
[ 3.577] (WW) config/udev: device Logitech Logitech BT Mini-Receiver already added. Ignoring.
[ 3.577] (II) config/udev: Adding input device Logitech Logitech BT Mini-Receiver (/dev/input/mouse0)
[ 3.577] (II) No input driver specified, ignoring this device.
[ 3.577] (II) This device may have been added with another device file.
[ 3.577] (WW) config/udev: device Logitech Logitech BT Mini-Receiver already added. Ignoring.
[ 5.136] (II) XKB: reuse xkmfile /var/lib/xkb/server-34CEB476A3CB596DA76FD7010A029F76732EF824.xkm
[ 5.150] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[ 5.165] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[ 5.167] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[ 5.168] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[ 5.172] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[ 5.258] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkm
[ 5.262] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkm
[ 5.266] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkm
[ 5.269] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkm
[ 5.273] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkm
[ 6.209] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[ 6.225] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkm
[ 30.260] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkm
[ 34.667] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 36.485] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[ 36.502] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[ 36.567] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkm
[ 36.661] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkm
[ 36.666] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkmGnome Ubuntu 16.04
Hors ligne
#7 Le 28/04/2014, à 21:21
- omega13
Re : Affichage réduit avec UG 14.04 et NVidia GTX 780
Xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 337.12 (buildd@charichuelo) Wed Apr 9 12:25:02 UTC 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "SAMSUNG"
HorizSync 15.0 - 81.0
VertRefresh 24.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 780"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-3"
Option "metamodes" "1920x1080 +0+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSectionGnome Ubuntu 16.04
Hors ligne
#8 Le 28/04/2014, à 21:22
- omega13
Re : Affichage réduit avec UG 14.04 et NVidia GTX 780
Xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DVI-D-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 160mm x 90mm
1920x1080 60.0*+ 59.9 50.0 30.0 25.0 24.0 60.1 60.0 50.0
1680x1050 60.0
1600x900 60.0
1440x900 59.9
1366x768 59.8
1280x1024 75.0 60.0
1280x800 59.8
1280x720 60.0 59.9 50.0
1152x864 75.0
1024x768 75.0 70.1 60.0
800x600 75.0 72.2 60.3
720x576 50.0 50.1
720x480 59.9 60.1
640x480 75.0 72.8 59.9
DP-1 disconnected (normal left inverted right x axis y axis)Gnome Ubuntu 16.04
Hors ligne