#51 Le 24/05/2014, à 17:14
- Alleged
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: According to the info in the boot sector, sda1 starts
at sector 0. But according to the info from fdisk,
sda1 starts at sector 2048.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files: /boot/grub/grub.cfg
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20120131
Boot sector info: Syslinux looks at sector 1988456 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
According to the info in the boot sector, sdc1 starts
at sector 0. But according to the info from fdisk,
sdc1 starts at sector 62.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
sdb: ___________________________________________________________________________
File system: vfat
Boot sector type: Windows XP: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 999,423 997,376 EFI System partition
/dev/sda2 999,424 1,937,866,751 1,936,867,328 Data partition (Linux)
/dev/sda3 1,937,866,752 1,953,523,711 15,656,960 Swap partition (Linux)
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 4010 MB, 4010803200 bytes
124 heads, 62 sectors/track, 1018 cylinders, total 7833600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 62 7,826,383 7,826,322 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 0D8E-37C4 vfat
/dev/sda2 d27ddc93-e034-47e5-89ed-7d3c9608d65d ext4
/dev/sda3 b069d998-6d64-487e-8c51-185f22c542df swap
/dev/sdb 9475-A739 vfat
/dev/sdc1 7BC6-40D9 vfat
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb /media/ubuntu/9475-A739 vfat (rw,nosuid,nodev,uid=999,gid=999,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
/dev/sdc1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d27ddc93-e034-47e5-89ed-7d3c9608d65d
else
search --no-floppy --fs-uuid --set=root d27ddc93-e034-47e5-89ed-7d3c9608d65d
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d27ddc93-e034-47e5-89ed-7d3c9608d65d' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d27ddc93-e034-47e5-89ed-7d3c9608d65d
else
search --no-floppy --fs-uuid --set=root d27ddc93-e034-47e5-89ed-7d3c9608d65d
fi
linux /boot/vmlinuz-3.13.0-5-generic.efi.signed root=UUID=d27ddc93-e034-47e5-89ed-7d3c9608d65d ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-5-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-d27ddc93-e034-47e5-89ed-7d3c9608d65d' {
menuentry 'Ubuntu, avec Linux 3.13.0-5-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-5-generic-advanced-d27ddc93-e034-47e5-89ed-7d3c9608d65d' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d27ddc93-e034-47e5-89ed-7d3c9608d65d
else
search --no-floppy --fs-uuid --set=root d27ddc93-e034-47e5-89ed-7d3c9608d65d
fi
echo 'Chargement de Linux 3.13.0-5-generic…'
linux /boot/vmlinuz-3.13.0-5-generic.efi.signed root=UUID=d27ddc93-e034-47e5-89ed-7d3c9608d65d ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-5-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-5-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-5-generic-recovery-d27ddc93-e034-47e5-89ed-7d3c9608d65d' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d27ddc93-e034-47e5-89ed-7d3c9608d65d
else
search --no-floppy --fs-uuid --set=root d27ddc93-e034-47e5-89ed-7d3c9608d65d
fi
echo 'Chargement de Linux 3.13.0-5-generic…'
linux /boot/vmlinuz-3.13.0-5-generic.efi.signed root=UUID=d27ddc93-e034-47e5-89ed-7d3c9608d65d ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-5-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdc1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-Qf033icO/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-Qf033icO/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-Qf033icO/Tmp_Log: No such file or directory
File descriptor 9 (/proc/11746/mounts) leaked on lvscan invocation. Parent PID 17795: bash
File descriptor 63 (pipe:[175319]) leaked on lvscan invocation. Parent PID 17795: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-05-24__15h12 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04 LTS, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
sdb may have broken partition table.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdb doesn't contain a valid partition table
=================== os-prober:
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="0D8E-37C4" TYPE="vfat"
/dev/sda2: UUID="d27ddc93-e034-47e5-89ed-7d3c9608d65d" TYPE="ext4"
/dev/sda3: UUID="b069d998-6d64-487e-8c51-185f22c542df" TYPE="swap"
/dev/sdc1: UUID="7BC6-40D9" TYPE="vfat"
/dev/sdb: UUID="9475-A739" TYPE="vfat"
Linux not detected by os-prober on sda2. Please report this message to boot.repair@gmail.com
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== sda2recordfail=1/grub/grubenv :
recordfail=1
=================== UEFI/Legacy mode:
Unusual EFI: Please report this message to boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, grubenv-ng nogrub, no-docgrub, no-update-grub, 32, with-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, with--usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD10JPVX-60J (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 512MB 511MB fat32 boot
2 512MB 992GB 992GB ext4
3 992GB 1000GB 8016MB linux-swap(v1)
Error: /dev/sdb: unrecognised disk label
Model: USB DISK 2.0 (scsi)
Disk /dev/sdc: 4011MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 31.7kB 4007MB 4007MB primary fat32 boot, lba
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA WDC WD10JPVX-60J;
1:1049kB:512MB:511MB:fat32::boot;
2:512MB:992GB:992GB:ext4::;
3:992GB:1000GB:8016MB:linux-swap(v1)::;
Error: /dev/sdb: unrecognised disk label
BYT;
/dev/sdc:4011MB:scsi:512:512:msdos: USB DISK 2.0;
1:31.7kB:4007MB:4007MB:fat32::boot, lba;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdc1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sdb on /media/ubuntu/9475-A739 type vfat (rw,nosuid,nodev,uid=999,gid=999,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd freefall full fuse hpet input kmsg log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdc sdc1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper: control
ls /mnt/boot-sav/sda1/1:
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 64 6f 73 66 73 00 00 02 08 20 00 |.X.mkdosfs.... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 00 00 00 |........?.......|
00000020 00 38 0f 00 d0 03 00 00 00 00 00 00 02 00 00 00 |.8..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 00 01 29 c4 37 8e 0d 4e 4f 20 4e 41 4d 45 20 20 |..).7..NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdb doesn't contain a valid partition table
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 3.7G 119M 3.5G 4% /
udev devtmpfs 3.6G 12K 3.6G 1% /dev
tmpfs tmpfs 739M 1.2M 738M 1% /run
/dev/sdc1 vfat 3.8G 2.0G 1.8G 53% /cdrom
/dev/loop0 squashfs 923M 923M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 3.7G 1.3M 3.7G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 3.7G 80K 3.7G 1% /run/shm
none tmpfs 100M 68K 100M 1% /run/user
/dev/sdb vfat 15G 1.7G 14G 12% /media/ubuntu/9475-A739
/dev/sda1 vfat 487M 3.4M 483M 1% /mnt/boot-sav/sda1
/dev/sda2 ext4 909G 2.5G 861G 1% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xbbd98b34
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdc: 4010 MB, 4010803200 bytes
124 heads, 62 sectors/track, 1018 cylinders, total 7833600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0008b4b6
Device Boot Start End Blocks Id System
/dev/sdc1 * 62 7826383 3913161 c W95 FAT32 (LBA)
Disk /dev/sdb: 16.0 GB, 15972958208 bytes
64 heads, 32 sectors/track, 15233 cylinders, total 31197184 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x69642073
No OS or WinEFI system
EFI detected. Please check the options.
=================== Default settings
Recommended-Repair
This setting would not act on the MBR.
Additional repair would be performed: repair-filesystems
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
No change has been performed on your computer.
Hors ligne
#52 Le 24/05/2014, à 18:31
- malbo
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
1) tu sélectionnes "Autre chose" à l'étape 3 de l'installation
2) tu ne t'occupes que de modifier (en utilisant le bouton "Change") la partition sda2 pour dire que tu veux qu'elle soit dans le format EXT4, que son point de montage doit être / ; il faudra cocher la case "formater". Tu ne modifies et tu ne touches à aucune autre partition, tu laisses ce qui est déjà présélectionné dans le champ "Périphérique où sera installé le programme de démarrage" (en bas de cette vue) : ce qui est sélectionné dans ce champ n'est pas utilisé par l'installateur de Ubuntu.
Dernière modification par malbo (Le 24/05/2014, à 18:35)
Hors ligne
#53 Le 24/05/2014, à 21:57
- Alleged
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
C'est bon l'installation est terminée.
Merci pour tout ton aide.
PS: est ce qu'il y a un intérêt a ce que je laisse mon poste avec l'ensemble du rapport ?
Hors ligne
#54 Le 25/05/2014, à 07:13
- malbo
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
est ce qu'il y a un intérêt a ce que je laisse mon poste avec l'ensemble du rapport ?
Oui, moi j'ai besoin de pouvoir consulter ces rapports Boot-Info ultérieurement, c'est la raison pour laquelle tu as dû voir que je les colle dans les discussions. Je te prie donc de le laisser en place. Je crois comprendre que tu crains qu'il contienne des infos qui permettraient d'identifier ta machine - ou même de t'identifier toi-même - et tu crains pour ta sécurité. C'est une bonne attitude de se poser ces questions mais je peux t'assurer que ton rapport n'en contient pas.
Je souhaiterais vérifier le paramétrage de ton système UEFI : depuis une session de ton Ubuntu installé, pourrais-tu passer cette commande :
sudo efibootmgr -v
et poster ici le résultat obtenu
Dernière modification par malbo (Le 25/05/2014, à 07:17)
Hors ligne
#55 Le 25/05/2014, à 09:58
- Alleged
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Voilà le résultat :
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,3000,2001,2002,2003
Boot0000* ubuntu HD(1,800,f3800,7f8e6b89-2484-4940-8609-10e71bb645dd)File(\EFI\ubuntu\shimx64.efi)
Boot2001* USB Drive (UEFI) RC
Boot2002* Internal CD/DVD ROM Drive (UEFI) RC
Boot3000* Internal Hard Disk or Solid State Disk RC
Boot3001* Internal Hard Disk or Solid State Disk RC
Boot3002* Internal Hard Disk or Solid State Disk RC
Hors ligne
#56 Le 25/05/2014, à 10:07
- malbo
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Le résultat que tu as collé dans le post #55 montre qu'en principe ton ordi démarre par défaut sur Boot0000 (ubuntu) donc que tu tombes par défaut sur le menu Grub au démarrage. Tu peux confirmer ?
Peux-tu confirmer également que si tu maintiens enfoncée la touche F9 au démarrage de l'ordi, tu tombes bien sur un menu de démarrage (proposé par ton système UEFI) qui contient l'entrée "ubuntu" et que si tu sélectionnes cette entrée "ubuntu", tu arrives également sur le menu Grub ?
Hors ligne
#57 Le 25/05/2014, à 13:09
- Alleged
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Si menu GRUB =page violet avec ubuntu et les petits points en dessous. Alors oui
Hors ligne
#58 Le 25/05/2014, à 13:53
- malbo
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Si menu GRUB =page violet avec ubuntu et les petits points en dessous. Alors oui
Je ne sais pas ce que tu veux dire par "les petits points en dessous". Pourrais-tu refaire un Boot-Info pour que je puisse contrôler ce qui se passe ?
D'autre part, tu n'as pas répondu à ma question sur la touche F9...
Hors ligne
#59 Le 25/05/2014, à 14:02
- Korak
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Si menu GRUB =page violet avec ubuntu et les petits points en dessous. Alors oui
Non,ça c'est l'écran de démarrage d'Ubuntu.
Le menu de GRUB, c'est quelle que chose comme ceci:
http://doc.ubuntu-fr.org/lib/exe/fetch. … 132006.png
Ou ceci:
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#60 Le 25/05/2014, à 14:41
- Alleged
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Alors j'ai pas ça. C'est grave ?
Hors ligne
#61 Le 25/05/2014, à 14:49
- Korak
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Grave? Non.
Quand on a qu'un seul système installé sur le PC (ce qui est ton cas), le menu de GRUB ne sert qu'a démarrer en mode Recovery ou sur un ancien noyau.
Si tu dois accéder au menu de GRUB, au démarrage du PC maintient la touche majuscule enfoncée (ou la touche Esc, ça dépend du PC) jusqu'à ce que le menu de GRUB s'affiche.
Dernière modification par Korak (Le 25/05/2014, à 14:50)
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#62 Le 25/05/2014, à 14:53
- malbo
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Non, c'est pas grave : ma question était idiote : tu ne peux pas voir le menu Grub par défaut (pour que le menu Grub soit visible au démarrage, il faut qu'il y ait plusieurs OS détectés par Grub sinon Grub considère que ça ne sert à rien de présenter le menu).
Et pour ma question sur la touche F9 : ça fait la troisième fois que je la pose, tu vas y répondre ou bien ?
Dernière modification par malbo (Le 25/05/2014, à 14:53)
Hors ligne
#63 Le 25/05/2014, à 15:06
- Korak
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Peux-tu confirmer également que si tu maintiens enfoncée la touche F9 au démarrage de l'ordi, tu tombes bien sur un menu de démarrage (proposé par ton système UEFI) qui contient l'entrée "ubuntu" et que si tu sélectionnes cette entrée "ubuntu", tu arrives également sur le menu Grub ?
Pour répondre à la question de malbo, tu allumes le PC puis tu tapotes directement sur la touche F9 jusqu'à l'apparition du gestionnaire d'amorçage du PC.
Commence par nous dire quelle sont les choix possible dans ce gestionnaire d'amorçage.
Puis choisi la ligne ubuntu (normalement, c'est la première ligne) et dis-nous ce qu'il se passe ensuite.
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#64 Le 25/05/2014, à 15:06
- Alleged
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
J'ai répondu pour F9. J'arrive bien sur la page que tu as décrite et ensuite j'arrive sur la page ubuntu quand je tape sur ok
Hors ligne
#65 Le 25/05/2014, à 15:46
- Korak
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
J'ai répondu pour F9.
Où? Je ne retrouve pas l'info.
J'arrive bien sur la page que tu as décrite
Quelle page? Dis-nous ce que contient cette page.
et ensuite j'arrive sur la page ubuntu quand je tape sur ok
Même chose, quelle page?
Essaie d'être le plus précis possible, sinon un dépannage peut tourner à la catastrophe car nous n'avons pas les bonnes informations (ou pas assez d'informations).
Ne le prend pas mal, nous essayons de faire notre possible pour dépanner valablement.
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#66 Le 25/05/2014, à 16:16
- Alleged
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Quand je tape sur F9 au démarrage, j'arrive su boot manager.
En dessous de boot option menu j'ai en premier choix ubuntu <WDC WD10JPVX-60JC3T0>
et en 2e choix j'ai boot from EFI file
Quand je clique sur ubuntu j'arrive sur la page ubuntu violet puis la page d'ouverture de session.
Est-ce que cela vous va comme description ?
Hors ligne
#67 Le 25/05/2014, à 16:19
- Korak
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Oui, voilà ce que malbo désire savoir.
Donc, si j'ai bien compris, tout fonctionne correctement?
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#68 Le 25/05/2014, à 16:30
- Alleged
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Oui du moins j'en ai l'impression.
Merci pour tout
Hors ligne
#69 Le 25/05/2014, à 16:47
- malbo
Re : [resolu] installation ubuntu sur hP pavillon 17-E015SF
Quand je tape sur F9 au démarrage, j'arrive su boot manager.
En dessous de boot option menu j'ai en premier choix ubuntu <WDC WD10JPVX-60JC3T0>
et en 2e choix j'ai boot from EFI file
Moi ça me va aussi ta réponse :
- le premier choix signifie : "Ubuntu qui se trouve sur le disque dur WDC WD10JPVX-60JC3T0"
- le deuxième choix est une fonctionnalité qui te permet de booter sur n’importe quel fichier de type .efi à condition d'en indiquer le chemin : ça parait un peu compliqué au départ mais c'est semi-automatique et assez intuitif à mon goût et on comprend vite comment ça marche. Si un jour tu as des ennuis de démarrage, tu peux utiliser cette fonctionnalité très intéressante pour se dépanner soi-même.
EDIT : je viens d'ajouter le modèle HP Pavilion 17-E015SF dans la Liste des portables « HP »
Dernière modification par malbo (Le 26/05/2014, à 08:44)
Hors ligne