#1 Le 18/07/2014, à 13:48
- jemalodo
[Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Bonjour
J'ai un compaq avec un processeur AMD E1-2500 APU. il n'y a aucun systeme d'exploitation.
J'ai installe LTS 14.04 et je n'arrive pas a booter. Le boot info donne. Est-ce qu'on m'expliquer la cause du probleme?
Merci
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
Dernière modification par jemalodo (Le 12/08/2014, à 17:52)
Hors ligne
#2 Le 18/07/2014, à 13:59
- nexus66
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Salut tu peux booter sur ton Live CD/USB et réinstaller Grub-PC. Tu peux suivre l'une des méthode via ce lien.
Un jour on vivra dans un monde libre sans argent et sans banques.
Tout le monde s'adhérera à l'Open Source et le partage sera la devise de toute personne.
Hors ligne
#3 Le 18/07/2014, à 14:05
- bishop
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Salut jemalodo !
Sinon tu as Boot Repair un - Réparateur de Démarrage -
La plus grande surprise que puisse faire un con c'est de faire une pause.
Hors ligne
#4 Le 18/07/2014, à 19:26
- jemalodo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
@bishopm j'ai utilise boot repair mais ca ne marche pas : http://paste.ubuntu.com/7815546/
Pour info j'ai installe la version 14.04 sur un nouveau disque tout neuf mais toujours echec....
@nexus66 : J'ai du mal avec post sur grub-pc.
Hors ligne
#5 Le 18/07/2014, à 23:21
- Bougron
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Bonjour
J'ai un compaq avec un processeur AMD E1-2500 APU. il n'y a aucun systeme d'exploitation.============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
Bonsoir
Ta déduction est peut-être fausse.
Tu n'as pas donné tout le contenu du boot info
cela aurait permit de voir si le bios de ton micro boote en LEGACY
si oui, effectivement, il y a un problème.
si ton bios boote en monde EFI, il faut chercher la présence d'une partition FAT32 et voir les fichiers qu'elle contient.
-
Le boot-repair que tu viens de donner répond à cette question.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi$
as-tu au moins essayé de booter?
Dernière modification par Bougron (Le 11/08/2014, à 07:53)
Hors ligne
#6 Le 19/07/2014, à 08:06
- jemalodo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
@bougron
Oui j'ai essayé de rebooter mais toujours rien.
Hors ligne
#7 Le 19/07/2014, à 09:05
- Bougron
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Bonjour.
Pourtant je ne vois pas spécialement d'anomalies dans le boot-info.
Une piste qui est peut-être stupide: Regardes dans le bios si par un malencontreux hasard le type de boot soit sur legacy au lieu de EFI. Si ce n'est pas cela, Je n'ai pas d'autres pistes.
Peut-être pourras tu alors décrire précisément où cela coince??
Hors ligne
#8 Le 09/08/2014, à 07:47
- jemalodo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Lors du boot de mon pc, j'ai le message "No boot disk has been detected or the dis has failed"
Hors ligne
#9 Le 09/08/2014, à 08:10
- jemalodo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
j'ai désactivé dans le bios la compatibilité avec les anciens équipements, donc pour moi je dois booter mon pc en UEFI. Cependant j'ai toujours le même problème
Hors ligne
#10 Le 09/08/2014, à 08:20
- malbo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Ordi éteint, tu presses la touche F9 et tu démarres l'ordi avec la touche F9 maintenue enfoncée jusqu'à ce que tu vois apparaître le Boot Menu à l'écran. Tu dois voir une entrée pour Ubuntu dans ce menu.
Autre moyen (si la première proposition ne fonctionne pas) : il faut un CD (chez moi, ça ne marche pas avec une clé USB) "Super Grub2 Disk" comme expliqué ici : http://forum.ubuntu-fr.org/viewtopic.ph … #p13655091
EDIT : c'est quoi le nom complet de ton modèle d'ordi ? (j'ai vu HP Compaq 100-210ef dans Google mais je ne suis pas sûr que c'est ça ...)
Dernière modification par malbo (Le 09/08/2014, à 08:29)
Hors ligne
#11 Le 09/08/2014, à 08:42
- jemalodo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Oui mon pc est bien un compaq 100 -210def.
J'ai bien essayé la première solution, toujours échec. Je sais essayer la 2° solution.....
Hors ligne
#12 Le 09/08/2014, à 10:30
- malbo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
J'ai bien essayé la première solution, toujours échec.
Mais est-ce qu'au moins l'appui sur la touche F9 a pu te permettre d'afficher le Boot-Menu à l'écran ou bien l'action sur F9 n'a eu aucun effet ?
Hors ligne
#13 Le 09/08/2014, à 13:28
- jemalodo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
oui F9 me donne le boot menu. j'ai choisi ubuntu et j'ai le meme message
Hors ligne
#14 Le 09/08/2014, à 13:36
- malbo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Essaie la méthode avec "Super Grub2 Disk" que j'ai proposée dans le post #10. Télécharge le fichier ISO "super_grub2_disk_hybrid_2.00s2" ici ( il faut cliquer sur "Super Grub2 Disk (Floppy, CD & USB in one) 2.00s2 (ISO)[Mirror #1] " ) : http://www.supergrubdisk.org/category/d … kdownload/
C'est la version la plus fraîche. Je te le redis : n'essaie pas de mettre ça sur une clé USB, ça ne marche pas (en tout cas chez moi). Grave cet ISO sur un CD (ou un CD ré-inscriptible) en utilisant la fonctionnalité "graver une image" du logiciel de gravure.
Dernière modification par malbo (Le 09/08/2014, à 13:42)
Hors ligne
#15 Le 09/08/2014, à 14:23
- jemalodo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
J'arrive à booter via le "Super Grub2 Disk" , ensuite j'arrive à faire booter sur ma partition Ubutun. Cependant je sais pas comment corriger définitivement le problème avec "Super Grub2 Disk"
Hors ligne
#16 Le 09/08/2014, à 15:45
- malbo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Ton Ubuntu installé est donc parfaitement fonctionnel, c'est important. Reste à réparer le démarrage mais je ne voudrais pas te faire faire des manips inutiles : je préfère faire l'état des lieux avant. C'est pourquoi je te prie de faire un Boot-Info depuis une session de ton Ubuntu installé sur le disque dur (en passant par "Super Grub2 Disk") en suivant cette procédure simplifiée (surtout ne clique pas sur la "Réparation recommandée" : fais seulement le Boot-Info) : http://forum.ubuntu-fr.org/viewtopic.ph … #p16690381
Tu posteras l'URL du Boot-Info.
Dernière modification par malbo (Le 09/08/2014, à 15:46)
Hors ligne
#17 Le 09/08/2014, à 16:59
- jemalodo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Bonsoir
voici le boot-info de mon PC avec Ubuntu installé sur mon PC. J'ai booté via "Super Grub2 Disk"
Hors ligne
#18 Le 09/08/2014, à 17:15
- malbo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Donne l'URL du Boot-Info comme tu l'avais fait dans le post #4 (je ne le vois pas dans ton post précédent)
Hors ligne
#19 Le 09/08/2014, à 17:25
- jemalodo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Désolé, un oubli de ma part.
http://paste.ubuntu.com/7999590/
Hors ligne
#20 Le 09/08/2014, à 18:13
- Bougron
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Bonsoir.
Je pense que Malbo est train de prendre une pose, sinon il aurait dèjà dit boot-repair a fait encore fait des siennes
et il dirait voici ce que le boot-info signale
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: ___________ _______________________________________________________________
File system: BIOS Boot partition
Boot sector type: FAT32
Boot sector info:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
"Je te prie de supprimer la partition FAT32 nommée SDA1 et de faire un nouveau boot comme cela est indiqué dans le post #10"...
Une partition Bios-grub est utile pour un boot en LEGACY, mais elle ne doit pas être au format FAT32.
Le BOOT EFI prend seulement une partition FAT32 par disque.
La première n'a rien de bootable, alors que la seconde est peut-être correcte.
De plus, le boot-info que tu as donné au post #4 ne contenait pas cette partition.
Je viens de regarder l'ordre des boots, Ubuntu est en 10e position.
Il n'y a probablement rien avant, donc cela devrait mettre en route.
Si cela est un peu long, l'ordre pourra être changé pour le mettre en première position.
BootOrder: 0001,000E,000F,0002,000B,0006,0010,0000
Boot0000* ubuntu Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0001* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)..BO
Boot0002* USB Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)..BO
Boot0006 USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)..BO
Boot000B Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000000)..BO
Boot000E* UEFI: IPv4 Realtek PCIe FE Family Controller ACPI(a0341d0,0)PCI(2,3)PCI(0,0)MAC(a0481caa5413,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0..BO
Boot000F* UEFI: IPv6 Realtek PCIe FE Family Controller ACPI(a0341d0,0)PCI(2,3)PCI(0,0)MAC(a0481caa5413,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000..BO
Boot0010* UEFI: hp DVD-RAM GHB0N ACPI(a0341d0,0)PCI(11,0)03120a000100ffff0000CD-ROM(1,11a6,1680)..BO
=================== UEFI/Legacy mode:
Dernière modification par Bougron (Le 09/08/2014, à 18:27)
Hors ligne
#21 Le 09/08/2014, à 18:20
- malbo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: BIOS Boot partition
Boot sector type: FAT32
Boot sector info:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: According to the info in the boot sector, sdb1 has 0
sectors.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,953,791 1,951,744 BIOS Boot partition
/dev/sda2 1,953,792 99,610,623 97,656,832 EFI System partition
/dev/sda3 99,610,624 119,142,399 19,531,776 Swap partition (Linux)
/dev/sda4 119,142,400 976,771,071 857,628,672 Data partition (Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 31.5 GB, 31499223040 bytes
64 heads, 32 sectors/track, 30040 cylinders, total 61521920 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 63 9,860 9,798 c W95 FAT32 (LBA)
/dev/sdb2 10,240 61,521,919 61,511,680 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 7269-E2DD vfat
/dev/sda2 D81D-9C82 vfat
/dev/sda3 2b9ad3bf-45eb-480b-964c-d37600e6ff65 swap
/dev/sda4 257c448a-9f7c-4946-b18d-d9d048b56177 ext4
/dev/sdb1 BA76-3900 vfat
/dev/sr0 iso9660 ISOIMAGE
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda2 /boot/efi vfat (rw)
/dev/sda4 / ext4 (rw,errors=remount-ro)
/dev/sdb1 /media/do-jean/BA76-3900 vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
/dev/sr0 /media/do-jean/ISOIMAGE iso9660 (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks2)
=========================== sda4/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 257c448a-9f7c-4946-b18d-d9d048b56177
else
search --no-floppy --fs-uuid --set=root 257c448a-9f7c-4946-b18d-d9d048b56177
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-257c448a-9f7c-4946-b18d-d9d048b56177' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 257c448a-9f7c-4946-b18d-d9d048b56177
else
search --no-floppy --fs-uuid --set=root 257c448a-9f7c-4946-b18d-d9d048b56177
fi
linux /boot/vmlinuz-3.13.0-32-generic.efi.signed root=UUID=257c448a-9f7c-4946-b18d-d9d048b56177 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-257c448a-9f7c-4946-b18d-d9d048b56177' {
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-257c448a-9f7c-4946-b18d-d9d048b56177' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 257c448a-9f7c-4946-b18d-d9d048b56177
else
search --no-floppy --fs-uuid --set=root 257c448a-9f7c-4946-b18d-d9d048b56177
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic.efi.signed root=UUID=257c448a-9f7c-4946-b18d-d9d048b56177 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-257c448a-9f7c-4946-b18d-d9d048b56177' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 257c448a-9f7c-4946-b18d-d9d048b56177
else
search --no-floppy --fs-uuid --set=root 257c448a-9f7c-4946-b18d-d9d048b56177
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic.efi.signed root=UUID=257c448a-9f7c-4946-b18d-d9d048b56177 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-257c448a-9f7c-4946-b18d-d9d048b56177' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 257c448a-9f7c-4946-b18d-d9d048b56177
else
search --no-floppy --fs-uuid --set=root 257c448a-9f7c-4946-b18d-d9d048b56177
fi
echo 'Chargement de Linux 3.13.0-24-generic…'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=257c448a-9f7c-4946-b18d-d9d048b56177 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-257c448a-9f7c-4946-b18d-d9d048b56177' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 257c448a-9f7c-4946-b18d-d9d048b56177
else
search --no-floppy --fs-uuid --set=root 257c448a-9f7c-4946-b18d-d9d048b56177
fi
echo 'Chargement de Linux 3.13.0-24-generic…'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=257c448a-9f7c-4946-b18d-d9d048b56177 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-24-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda4/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda4 during installation
UUID=257c448a-9f7c-4946-b18d-d9d048b56177 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
UUID=D81D-9C82 /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=2b9ad3bf-45eb-480b-964c-d37600e6ff65 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda4: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-NPMRwcWf/Tmp_Log: No such file or directory
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-08-09__17h56 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in installed-session (Ubuntu 14.04 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=257c448a-9f7c-4946-b18d-d9d048b56177 ro
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda4:L'OS actuellement utilisé - Ubuntu 14.04 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="7269-E2DD" TYPE="vfat"
/dev/sda2: UUID="D81D-9C82" TYPE="vfat"
/dev/sda3: UUID="2b9ad3bf-45eb-480b-964c-d37600e6ff65" TYPE="swap"
/dev/sda4: UUID="257c448a-9f7c-4946-b18d-d9d048b56177" TYPE="ext4"
/dev/sr0: LABEL="ISOIMAGE" TYPE="iso9660"
/dev/sdb1: SEC_TYPE="msdos" UUID="BA76-3900" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 août 9 09:58 grub.d
total 76
-rwxr-xr-x 1 root root 9424 avril 11 12:51 00_header
-rwxr-xr-x 1 root root 6058 avril 10 17:58 05_debian_theme
-rwxr-xr-x 1 root root 11608 avril 11 12:51 10_linux
-rwxr-xr-x 1 root root 10412 avril 11 12:51 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 13:31 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 11 12:51 30_os-prober
-rwxr-xr-x 1 root root 1416 avril 11 12:51 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 11 12:51 40_custom
-rwxr-xr-x 1 root root 216 avril 11 12:51 41_custom
-rw-r--r-- 1 root root 483 avril 11 12:51 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda4: UUID=D81D-9C82 (sda2)
efibootmgr -v
BootCurrent: 0010
Timeout: 0 seconds
BootOrder: 0001,000E,000F,0002,000B,0006,0010,0000
Boot0000* ubuntu Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0001* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)..BO
Boot0002* USB Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)..BO
Boot0006 USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)..BO
Boot000B Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000000)..BO
Boot000E* UEFI: IPv4 Realtek PCIe FE Family Controller ACPI(a0341d0,0)PCI(2,3)PCI(0,0)MAC(a0481caa5413,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0..BO
Boot000F* UEFI: IPv6 Realtek PCIe FE Family Controller ACPI(a0341d0,0)PCI(2,3)PCI(0,0)MAC(a0481caa5413,0)030d3c000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000..BO
Boot0010* UEFI: hp DVD-RAM GHB0N ACPI(a0341d0,0)PCI(11,0)03120a000100ffff0000CD-ROM(1,11a6,1680)..BO
=================== UEFI/Legacy mode:
Unusual EFI: Veuillez indiquer ce message à boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda4 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-maybe-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /media/do-jean/BA76-3900.
sda : GPT, BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, usb-disk, no-os, 63 sectors * 512 bytes
=================== parted -l:
Model: ATA ST500DM002-1BD14 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 1000MB 999MB fat32 bios_grub
2 1000MB 51.0GB 50.0GB fat32 boot
3 51.0GB 61.0GB 10.0GB linux-swap(v1)
4 61.0GB 500GB 439GB ext4
Model: Generic STORAGE DEVICE (scsi)
Disk /dev/sdb: 31.5GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 5049kB 5017kB primary lba
2 5243kB 31.5GB 31.5GB primary
Error: Can't have a partition outside the disk!
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:gpt:ATA ST500DM002-1BD14;
1:1049kB:1000MB:999MB:fat32::bios_grub;
2:1000MB:51.0GB:50.0GB:fat32::boot;
3:51.0GB:61.0GB:10.0GB:linux-swap(v1)::;
4:61.0GB:500GB:439GB:ext4::;
BYT;
/dev/sdb:31.5GB:scsi:512:512:msdos:Generic STORAGE DEVICE;
1:32.3kB:5049kB:5017kB:::lba;
2:5243kB:31.5GB:31.5GB:::;
Error: Can't have a partition outside the disk!
=================== mount:
/dev/sda4 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda2 on /boot/efi type vfat (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=do-jean)
/dev/sdb1 on /media/do-jean/BA76-3900 type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
/dev/sr0 on /media/do-jean/ISOIMAGE type iso9660 (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks2)
gvfsd-fuse on /home/do-jean/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet input kmsg log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sdb sdb1 sdb2 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhost-net zero
ls /dev/mapper: control
ls /mnt/boot-sav/sda1/2:
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 a0 0f 00 e7 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 dd e2 69 72 20 20 20 20 20 20 20 20 20 |..)..ir |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
ls /boot/efi/2:
=================== hexdump -n512 -C /dev/sda2
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 40 20 00 |.X.mkfs.fat..@ .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 d0 1d 00 |........?.......|
00000020 00 20 d2 05 8f 2e 00 00 00 00 00 00 02 00 00 00 |. ..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 82 9c 1d d8 4e 4f 20 4e 41 4d 45 20 20 |..)....NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 3c 90 6d 6b 66 73 2e 66 61 74 00 02 04 01 00 |.<.mkfs.fat.....|
00000010 02 00 02 46 26 f8 08 00 20 00 40 00 3f 00 00 00 |...F&... .@.?...|
00000020 00 00 00 00 80 01 29 00 39 76 ba 20 20 20 20 20 |......).9v. |
00000030 20 20 20 20 20 20 46 41 54 31 32 20 20 20 0e 1f | FAT12 ..|
00000040 be 5b 7c ac 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 |.[|.".t.V.......|
00000050 5e eb f0 32 e4 cd 16 cd 19 eb fe 54 68 69 73 20 |^..2.......This |
00000060 69 73 20 6e 6f 74 20 61 20 62 6f 6f 74 61 62 6c |is not a bootabl|
00000070 65 20 64 69 73 6b 2e 20 20 50 6c 65 61 73 65 20 |e disk. Please |
00000080 69 6e 73 65 72 74 20 61 20 62 6f 6f 74 61 62 6c |insert a bootabl|
00000090 65 20 66 6c 6f 70 70 79 20 61 6e 64 0d 0a 70 72 |e floppy and..pr|
000000a0 65 73 73 20 61 6e 79 20 6b 65 79 20 74 6f 20 74 |ess any key to t|
000000b0 72 79 20 61 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 |ry again ... ...|
000000c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda4 ext4 403G 3.9G 379G 2% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.7G 12K 1.7G 1% /dev
tmpfs tmpfs 332M 1.2M 331M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.7G 76K 1.7G 1% /run/shm
none tmpfs 100M 32K 100M 1% /run/user
/dev/sda2 vfat 47G 3.5M 47G 1% /boot/efi
/dev/sdb1 vfat 4.8M 0 4.8M 0% /media/do-jean/BA76-3900
/dev/sr0 iso9660 12M 12M 0 100% /media/do-jean/ISOIMAGE
/dev/sda1 vfat 500M 3.4M 496M 1% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 976773167 488386583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 31.5 GB, 31499223040 bytes
64 heads, 32 sectors/track, 30040 cylinders, total 61521920 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00089fb8
Device Boot Start End Blocks Id System
/dev/sdb1 63 9860 4899 c W95 FAT32 (LBA)
/dev/sdb2 10240 61521919 30755840 83 Linux
EFI détecté. Veuillez vérifier les options.
Partition outside the disk détecté.
=================== Advice displayed in case of recommended repair
BIOS-Boot détecté. Vous souhaiterez peut-être ré-essayer après avoir désactivé l'option [Partition /boot/efi séparée :].
Voulez-vous continuer ?
=================== Final advice in case of recommended repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda2/efi/.../grub*.efi !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== Default settings
Recommended-Repair
This setting would purge (in order to sign-grub upgrade version) and reinstall the grub-efi-amd64-signed of sda4, using the following options: upgrade-grub sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
ça parait correct. Depuis ton Ubuntu installé - démarré en passant par "Super Grub2 Disk" - je te propose d'essayer de réparer le démarrage en t'inspirant de ce post #2 : http://forum.ubuntu-fr.org/viewtopic.ph … #p15030551
Donc tu passes la commande :
sudo grub-install
et tu copies le résultat qui s'affiche dans le terminal comme je l'ai fait et tu postes ça dans ta réponse comme ça je pourrai voir ce qui s'est passé.
Hors ligne
#22 Le 09/08/2014, à 19:01
- jemalodo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
J'espère que j'avais compris. Alors j'ai lancé lancé la commande sudo grub-install, j'ai obtenu ça:
---------------------------------
[sudo] password for do-jean:
Installing for x86_64-efi platform.
Installation terminée, sans erreur.
do-jean@dojean-100-210ef
---------------------------------
ça me paraît un peu suspect!!!!
Hors ligne
#23 Le 09/08/2014, à 22:43
- Bougron
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Bonsoir.
Non. C'est exactement le style de réponse que tu dois avoir car cela a été demandé sans l'option --verbose qui sort des milliers de lignes.
Tu peux donc commencer à regarder par Gparted si la partition sda1 est toujours FAT32 ou si elle a passé en état inconnu et faire ton boot.
Pour faire avancer un peu le sujet, j'ai installé un ubuntu sur un disque externe au format GTP. J'ai du manuellement créer la partition FAT32 pour le boot EFI.
Ce disque externe est donc bootable sur un micro EFI mais pas bootable sur un micro LEGACY.
pour le rendre bootable sur un micro LEGACY, j'ai du libérer 2 Mo en début de disque sur lesquels j'ai mis le drapeau "bios_grub'
et j'ai alors lancé "sudo grub-install /dev/sdb".
Cette partition est maintenant dans un format inconnu de Gparted donc pas en FAT32.
Pour info (Ceci ne demande pas de réponse), Mon disque externe est bootable sur un micro LEGACY.
Mais bootable ne veut pas dire que ubuntu se lance, car j'ai une énorme erreur due au fait que le "UUID" du disque sur lequel je veux booter n'est pas celui qui est proposé par le bootloader, Ni même celui du disque interne . Après recherches, j'ai trouvé que c'est le UUID de la clé LIVE-USB qui a servi à installer il y a quelques semaines la version 14.04.1
Hors ligne
#24 Le 10/08/2014, à 06:43
- jemalodo
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Bonjour
Les partitions de mon disque sont
/dev/sda1 : FAT32 avec drapeau bios_grub
/dev/sda2 : FAT32 avec point de montage /boot/efi
/dev/sda3 : swap
/dev/sda4 : EXT4
est-ce que je dois refaire les partitions et quelles sont les partitions créer ? et ensuite refaire une installation?
Encore merci pour vos réponses.
Hors ligne
#25 Le 10/08/2014, à 09:59
- Bougron
Re : [Résolu] - Pas de BOOTLOADER après l'installation du lts 14.04 - PC HP
Bonjour.
Avant de faire quoique ce soit, as-tu refais un boot pour vérifier que cela marche après ta commande sudo install-grub ?
Si oui, Cela donne quoi?
Si Oui et que cela n'a rien donné, Voila ce que je te propose:
1) Tu supprimes la partition SDA1 (Celle qui contient le 'Bios-grub').
2) Tu refais la commande de réparation avec des options supplémentaires:
sudo grub-install --recheck --verbose
3) Il est possible que cela suffise. Si ce n'est pas le cas, il faudra la refaire en ayant pris le soin de mettre un drapeau de boot classique (pas de bios-boot) sur la partition SDA2.
Dernière modification par Bougron (Le 10/08/2014, à 10:21)
Hors ligne