Ubuntu-fr

terato

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

J'ai un problème : Pas moyen d'utiliser le paramètre alignment bottom_middle ou top_middle, le bloc se retrouve systématiquement en haut à gauche.

Es tu sur que l'option middle existe bien ?

Je ne l'avais pas encore vu sur un conky.

Pendant que j'y suis, la largeur de mon bloc conkyrc n'est pas respecté quand je n'ai rien en lecture dans rythmbox mais qu'il est dans le systray.

Tu as défini la taille minimale que ton conky dois avoir,

minimum_size 280 5

Mais tu n'as pas défini la taille maximale, c'est pour cela qu'il peut changer de taille quand une appli démarre.

Utilise:

maximum_width

Cet option correspond à largeur maximale de la fenêtre.

J'espère que cela t'aidera.

Dernière modification par terato (Le 28/05/2008, à 19:07)

---

Mon bureau v1//v2//v3//v4

granguignol

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Terato, merci de m'avoir répondu
Pour maximum_width, çà  a l'air d'être bon

Es tu sur que l'option middle existe bien ?
Je ne l'avais pas encore vu sur un conky.

Sur la doc de conky soi-même première ligne
http://conky.sourceforge.net/config_settings.html

Dernière modification par granguignol (Le 28/05/2008, à 19:33)

olive33

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

salut a tous, voici mes conky:

le bureau sur ecran pc 17p

conky, deux tableaux de bord, que du traditionel quoi.
le conkyrc:

# conky configuration
# edited by Olive: mail_olive@yahoo.fr

# set to yes if you want Conky to be forked in the background
background no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*


# Use Xft?
use_xft yes

# Xft font when Xft is enabled
#xftfont Bitstream Vera Sans Mono:size=8
xftfont Terminus:size=8

# Text alpha when using Xft
xftalpha 0.8

# Print everything to console?
# out_to_console no

# mail spool
#mail_spool $MAIL

# Update interval in seconds
update_interval 3.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type override yes
own_window_skip_taskbar yes
own_window_skip_pager yes

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 200 5
maximum_width 200 640

# Draw shades?
draw_shades yes

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no
stippled_borders 2

# border margins
border_margin 6

#bordure des bargraph
draw_graph_borders yes

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color white


# Stippled borders?
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 10
gap_y 25

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes


# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer yes
#Note: doesn't work in conky 1.2 =(


TEXT
${font Terminus:size=10}${alignc}${color E7E1D6}${exec cat /etc/lsb-release | grep DISTRIB_DESCRIPTION | cut -d "=" -f2 }-${exec cat /etc/lsb-release | grep DISTRIB_CODENAME | cut -d "=" -f2 }
${font Terminus:size=8}${alignc}${color 708090}  $sysname $kernel
${font Terminus:size=8}${alignc}${color 708090}NvidiaDriver: ${exec nvidia-settings -q NvidiaDriverVersion  | grep '):' |  grep 'Attribute' |cut -c56-62}
${color 708090}${hr 1}
${offset 5}${color 708090}Core0 :${color E7E1D6} ${freq_g cpu 0}${color 708090}Ghz - ${color E7E1D6}${cpu cpu1}%
${offset 5}${color 708090}Core1 :${color E7E1D6} ${freq_g cpu 1}${color 708090}Ghz - ${color E7E1D6}${cpu cpu2}%
${alignc}${cpugraph 20,180 708090 E7E1D6}
${color 708090}CPU: ${color #E7E1D6}${exec sensors | grep 'CPU ' | cut -c15-16}${color 708090}°C   GPU: ${color #E7E1D6}${exec nvidia-settings -q gpucoretemp  | grep '):' |  grep 'Attribute' |cut -c48-49
}${color 708090}°C ${alignr} M/B: ${color #E7E1D6}${exec sensors | grep 'M/B ' | cut -c15-16}${color 708090}°C
${color #E7E1D6}  ${exec sensors | grep 'fan1:' | cut -c14-17}${color 708090} tpm  ${alignr}${color #E7E1D6}${exec sensors | grep 'fan2:' | cut -c14-17}${color 708090} tpm
${color 708090}Processus:${color E7E1D6} $processes ${color 708090}Running:${color E7E1D6} $running_processes 
${color 708090}Depuis ${color E7E1D6}$uptime
${color 708090}${hr 1}
${offset 5}${color 708090}Utilisation CPU :
${offset 10}${color #E7E1D6} ${top name 1} ${alignr 30}${top cpu 1}%
${offset 10}${color 708090} ${top name 2} ${alignr 30}${top cpu 2}%
${offset 10} ${top name 3} ${alignr 30}${top cpu 3}%
${offset 10} ${top name 4} ${alignr 30}${top cpu 4}%
${offset 10} ${top name 5} ${alignr 30}${top cpu 5}%

${offset 5}${color 708090}Utilisation MEM :
${offset 10}${color #E7E1D6} ${top_mem name 1} ${alignr 30}${top_mem mem 1}%
${offset 10}${color 708090} ${top_mem name 2} ${alignr 30}${top_mem mem 2}%
${offset 10} ${top_mem name 3} ${alignr 30}${top_mem mem 3}%
${offset 10} ${top_mem name 4} ${alignr 30}${top_mem mem 4}%
${offset 10} ${top_mem name 5} ${alignr 30}${top_mem mem 5}%
${hr 1}
${offset 5}${color 708090}Mem : ${color #E7E1D6}${mem}${color 708090} de ${memmax /}${alignr}${color #E7E1D6}$memperc%
${color #E7E1D6}${membar}
${offset 5}${color 708090}Swap: ${color #E7E1D6}${swap}${color 708090} de ${swapmax /} ${alignr}${color #E7E1D6}$swapperc%
${color #E7E1D6}${swapbar}
${color 708090}${hr 1}
${offset 5}${color 708090}System:
${color 708090}${fs_used /}${color 708090}/${fs_size /}${alignr}${color #E7E1D6}${fs_used_perc /}%  
${color #E7E1D6}${fs_bar /} 
${offset 5}${color 708090}Home:
${color 708090}${fs_used /home}${color 708090}/${fs_size /home}${alignr}${color #E7E1D6}${fs_used_perc /home}%  
${color #E7E1D6}${fs_bar /home} 
${offset 5}${color 708090}Backup: ${color #E7E1D6}${exec hddtemp -n /dev/sdb} °C
${color slategrey}${fs_used /media/hdc}${color 708090}/${fs_size /media/hdc}${alignr}${color #E7E1D6}${fs_used_perc /media/hdc}%
${color #E7E1D6}${fs_bar /media/hdc} 
${color 708090}${hr 1}
${offset 5}${color 708090}Connexions :
Down:${color #E7E1D6} ${downspeed eth1} k/s${color 708090}${alignr}Up:${color #E7E1D6}${upspeed eth1} k/s
${color #E7E1D6}${downspeedgraph eth1 32,85 E7E1D6 708090}   ${color #E7E1D6}${upspeedgraph eth1 32,85 708090 E7E1D6}
${color 708090}${hr 1}
${color 708090}  Artiste:   ${color E7E1D6}${exec cat ~/.quodlibet/current | grep artist | cut -d "=" -f2 }
${color 708090}  Titre:      ${color E7E1D6}${exec cat ~/.quodlibet/current | grep title | cut -d "=" -f2 }${alignr}${color 708090}(${color E7E1D6}${exec cat ~/.quodlibet/current | grep tracknumber | cut -d "=" -f2 }${color 708090})
${color 708090}  Album:   ${color E7E1D6}${exec cat ~/.quodlibet/current | grep album | cut -d "=" -f2 }
${color 708090}  genre:   ${color E7E1D6}${exec cat ~/.quodlibet/current | grep genre | cut -d "=" -f2 }
${color 708090}  Format: ${color E7E1D6}${exec cat ~/.quodlibet/current | grep format | cut -d "=" -f2 }${alignr}${color 708090}Bitrate: ${color E7E1D6}${exec expr `cat ~/.quodlibet/current | grep bitrate | cut -d "=" -f2` / 1000 }${color 708090} kb/s
${execi 10 ~/.quodlibet/resize.sh}
${execi 10 ~/.quodlibet/wallpaper.sh}

le bureau sur écran tv 32p, 1360*768 (HD ready comme on dit)

Conky là aussi et Cairo Dock, un seul tableau de bord, caché.
conkyrc2:

# configuration de conky pour le deuxieme écran partie basse
# by Olive: mail_olive@yahoo.fr

# set to yes if you want Conky to be forked in the background
background no

# Use Xft?
use_xft yes

# Xft font when Xft is enabled
#xftfont Bitstream Vera Sans Mono:size=8
xftfont URW Chancery L:size=36
# Text alpha when using Xft
xftalpha 0.8

# Print everything to console?
# out_to_console no

# Update interval in seconds
update_interval 3.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type override yes
own_window_skip_taskbar yes
own_window_skip_pager yes

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 900 5
maximum_width 900 40

# Draw shades?
draw_shades yes

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no
stippled_borders 2

# border margins
border_margin 6

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color white


# Stippled borders?
# Text alignment, other possible values are commented
#alignment top_left
#alignment top_right
alignment bottom_left
#alignment bottom_rigth

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 230
gap_y 170

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes


# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer yes
#Note: doesn't work in conky 1.2 =(


TEXT
${alignc}${color slate grey}${exec cat ~/.quodlibet/current | grep tracknumber | cut -d "=" -f2 }${color slate grey} -- ${color 22ccff}${exec cat ~/.quodlibet/current | grep title | cut -d "=" -f2 }

conkyrc3:

# configuration de conky pour le deuxieme écran partie haute
# by Olive: mail_olive@yahoo.fr

# set to yes if you want Conky to be forked in the background
background no

# Use Xft?
use_xft yes

# Xft font when Xft is enabled
#xftfont Bitstream Vera Sans Mono:size=8
xftfont URW Chancery L:size=36
# Text alpha when using Xft
xftalpha 0.8

# Print everything to console?
# out_to_console no

# Update interval in seconds
update_interval 3.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type override yes
own_window_skip_taskbar yes
own_window_skip_pager yes

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 600 5
maximum_width 600 50

# Draw shades?
draw_shades yes

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no
stippled_borders 2

# border margins
border_margin 6

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color white


# Stippled borders?
# Text alignment, other possible values are commented
alignment top_left
#alignment top_right
#alignment bottom_left
#alignment bottom_rigth

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 380
gap_y 45

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes


# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer yes
#Note: doesn't work in conky 1.2 =(


TEXT
${alignc}${color 22ccff}~${exec cat ~/.quodlibet/current | grep artist | cut -d "=" -f2 }~

${alignc}${color 22ccff}${exec cat ~/.quodlibet/current | grep album | cut -d "=" -f2 }

le dock permet de controler QuodLibet, lancer roxfiler sur des dossiers particulier: series, films..., firefox, ainsi qu'un terminal au cas ou, et un écran de veille (en réalité une video plein écran).
A  l'usage c'est trés pratique et assez beau je trouve.
Conky execute un petit script qui permet de mettre la pochette de l'album écouté en fond d'écran.
le sript wallpaper.sh:

#!/bin/sh
#-----------------------------------------------------------------------#
#                                                                       #
# Description : wallpaper script                                        #
# OS          : Linux                                                   #
# Licence     : GPL                                                     #
# Version     : 0.1.0                                                   #
# Author      : Olive : mail_olive@yahoo.fr                             #
#-----------------------------------------------------------------------#

# On définit le fichier pochette de l'album
chemin=~/.quodlibet/current.png

# On modifie la valeur de la clé du fond d'écran dans Gconf
gconftool -t str -s /desktop/gnome/background/picture_filename "$chemin"
# on force le centrage de la pochette
gconftool -t str -s /desktop/gnome/background/picture_options "centered"
# On force l'aspect du fond
# gconftool -t str -s /desktop/gnome/background/color_shading_type "vertical-gradient"
# gconftool -t str -s /desktop/gnome/background/primary_color "#995729"
# gconftool -t str -s /desktop/gnome/background/secondary_color "#E6A06D"

le script qui formate correctement la pochette:
resize.sh:

#! /bin/bash
convert ~/.quodlibet/current.cover -resize 300x300 ~/.quodlibet/current.png
convert ~/.quodlibet/current.cover -resize 600x600  -bordercolor Black -border 362x234 ~/Pictures/current.png
rm ~/.quodlibet/current.cover
&

voilà les prérequis sont Quodlibet et imagemagick sous Gnome avec deux écrans séparés (separate xscreens de nvidia).
pour faire ça chez vous, verifiez bien les chemins dans les script.

enjoy

ps le tout est lancé par ce script:
conkystart.sh

#!/bin/sh
sleep 20
killall conky
env DISPLAY=:0.0 conky -c .conkyrc&
env DISPLAY=:0.1 conky -c .conkyrc2&
env DISPLAY=:0.1 conky -c .conkyrc3&
#env DISPLAY=:0.0 conky -c .conkyrc4&

j'ai supprimer le conkyrc4 qui me permettai d'afficher les flux rss du Monde.fr parceque ça marche plus, je sais pas pourquoi. Je cherche.

Dernière modification par olive33 (Le 29/05/2008, à 13:35)

---

Ubuntu 14.04 LTS... -Intel i5 -nvidia gt520 ...joli boitier de salon bien silencieux :D
Lubuntu pour la musique dans un boitier encore plus joli et encore plus silencieux !!

Antoine974

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Plop,
j'ai une petite question bete a laquelle je n'ai pas trouvé de reponse
Comment creer un deuxieme conky ( pour mettre un script pour afficher bashfr) ??
je suppose que vous avez dues deja repondre a cette question dans le fil de la discussion mais 53 pages
enfin bref merci

---

mon blog : www.poufctout.go1.cc
Home cinema : Nettop ION atom 330 sous XBMC
Samsung N510 ubuntu 9.10

utodeb

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Salut,

-c | --config=FILE
              Config file to load instead of $HOME/.conkyrc

Donc

conky -c conkyrc1 & conky -c conkyrc2

++

---

Smile today tomorrow will be worse
Simple comme Ubuntu n°2 10.04 LTS

Antoine974

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

cht'i probleme

antoine@ubuntu:~$ -c | --config=FILE
bash: --config=FILE : commande introuvable
bash: -c : commande introuvable
antoine@ubuntu:~$ conky -c conkyrc1 & conky -c conkyrc2
Conky: invalid configuration file 'conkyrc1'

Conky: /home/antoine/.conkyrc: 7: no such configuration: 'on_bottom'
Conky: /home/antoine/.conkyrc: 22: config file error
Conky: use_spacer should have an argument of left, right, or none.  'no' seems to be some form of 'false', so defaulting to none.
Conky: desktop window (10000a9) is subwindow of root window (13b)
Conky: window type - normal
Conky: drawing to created window (4400001)
[1] 28667
Conky: drawing to double buffer
Conky: invalid configuration file 'conkyrc2'

Conky: /home/antoine/.conkyrc: 7: no such configuration: 'on_bottom'
Conky: /home/antoine/.conkyrc: 22: config file error
Conky: use_spacer should have an argument of left, right, or none.  'no' seems to be some form of 'false', so defaulting to none.
X Error of failed request:  BadWindow (invalid Window parameter)
  Major opcode of failed request:  20 (X_GetProperty)
  Resource id in failed request:  0x12039e8
  Serial number of failed request:  236
  Current serial number in output stream:  236
antoine@ubuntu:~$ --21:58:25--  http://ip.tupeux.com/
           => `-'
Résolution de ip.tupeux.com... 88.191.12.240
Connexion vers ip.tupeux.com|88.191.12.240|:80... connecté.
requête HTTP transmise, en attente de la réponse... 200 OK
Longueur: 12 [text/html]

100%[====================================>] 12            --.--K/s             

21:58:31 (2.36 MB/s) - « - » sauvegardé [12/12]

Conky: received SIGINT or SIGTERM to terminate. bye!

et maintenant mon conky se met a clignoter
help j'ai l'impression que la premiere commande n'as pas marché ..

---

mon blog : www.poufctout.go1.cc
Home cinema : Nettop ION atom 330 sous XBMC
Samsung N510 ubuntu 9.10

Lenezir

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

La première commande qu'il t'a donné c'était pour te donner la description de l'option -c de la commande conky.
Après le clignotement est dû à ton Conky même.
Montre-les nous

Antoine974

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

j'ai pas encore de deuxieme conky je voulais creer le deuxieme justement ...
Sinon il est possible qu'il me crée le deuxieme exactement le meme sur le premier et ça fait tout clignoter ???

Voila le screen

et le conkyrc

#----------------------------#
#   Configuration de conky   #
#----------------------------#

own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
use_xft yes
on_bottom yes
xftfont purisa:size=10
xftalpha 0.8
update_interval 1
total_run_times 0
own_window yes
own_window_transparent yes
double_buffer yes
minimum_size 10 10
draw_shades no
draw_outline no
draw_borders no
stippled_borders 8
border_margin 2
border_width 2
default_color #4582B5
default_shade_color black
default_outline_color black
alignment top_right
gap_x 5
gap_y 25
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale yes
use_spacer no


#-----------------------------------------------#
#   Configuration des informations a afficher   #
#-----------------------------------------------#

TEXT
${color grey}$stippled_hr
$alignc${color white}Antoine
$alignc${color #aaaaaa}Kernel : ${color #FFFFFF}$kernel
$alignc${color #aaaaaa}Uptime : ${color #FFFFFF}$uptime - ${color #aaaaaa}Load : ${color #FFFFFF}$loadavg
${color grey}$stippled_hr
$Alignc${color white}Systeme information

$color5${cpu cpu0}%$color1 -$color5${freq}MHz$color1 -$color5${execi 2 sensors | grep 'Core 0' | sed -e 's/.*  +//' | sed -e 's/.0°C.*//'}°C $alignr$color6${cpu cpu1}%$color1 -$color6${freq}MHz$color1 -$color6${execi 2 sensors | grep 'Core 1' | sed -e 's/.*  +//' | sed -e 's/.0°C.*//'}${font bauhaus}°${font purisa}C
$color5${cpubar cpu0 5,150} $alignr$color6${cpubar cpu1 5,150}

$color0 Geforce 8800GT:${execi 60 nvclock -i |grep "GPU clock" |sed -e 's/.*k://'}
$color0 Temperature du GPU : $color${exec nvidia-settings -q gpucoretemp | grep '):' | awk '{print $4}'}${font bauhaus}°${font purisa}C
$alignc${color #aaaaaa}RAM :${color #FFFFFF} $mem / $memmax - $memperc%
${color #FFFFFF}${membar}
$alignc${color #aaaaaa}Swap :${color #FFFFFF} $swap / $swapmax - $swapperc%
${color #FFFFFF}${swapbar}
${color grey}$stippled_hr
$Alignc${color white}Network

${color #aaaaaa}IP Locale : ${color #FFFFFF}${addr eth1}
${color #FFFFFF}IP Public : ${execi 60 wget -O - http://ip.tupeux.com | tail}
${color #aaaaaa}In : ${color #FFFFFF}${color}${tcp_portmon 1 32767 count}  ${color #aaaaaa}Out : ${color #FFFFFF}${color}${tcp_portmon 32768 61000 count}$alignr ${color #aaaaaa}ALL : ${color #FFFFFF}${color}${tcp_portmon 1 65535 count}
${color #aaaaaa}Download :${color white} ${downspeed eth1} k/s${color white} ${offset 80}${color #aaaaaa}$alignr Upload:${color white} ${upspeed eth1} k/s
${color #aaaaaa}Downloaded: ${color}${totaldown eth1}$alignr ${color} ${color #aaaaaa}Uploaded: ${color}${totalup eth1}
${color #FFFFFF}${downspeedgraph eth1 32,150 aaaaaa FFFFFF} ${color #FFFFFF}${upspeedgraph eth1 32,150 FFFFFF aaaaaa}
${color grey}$stippled_hr
$Alignc${color white}Process

${color #aaaaaa}Processus : ${color #FFFFFF}${color}$processes ${color #aaaaaa}En cours : ${color #FFFFFF}${color}$running_processes ${color #aaaaaa}$alignr CPU   MEM
${color #FFFFFF}${top name 1} $alignr${top cpu 1}  ${top mem 1}
${color #CCCCCC}${top name 2} $alignr${top cpu 2}  ${top mem 2}
${color #999999}${top name 3} $alignr${top cpu 3}  ${top mem 3}
${color #666666}${top name 4} $alignr${top cpu 4}  ${top mem 4}

Merci

---

mon blog : www.poufctout.go1.cc
Home cinema : Nettop ION atom 330 sous XBMC
Samsung N510 ubuntu 9.10

Lenezir

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Alors pour ton problème de clignotement va voir ici :
http://doc.ubuntu-fr.org/conky#probleme_de_clignotement
Après j'ai vu dans ton screen que tu fais plein de commandes bizarres avec conky.
Pour lancer conky avec un seul .conkyrc, tape simplement "conky" dans ton terminal. Si tu as 2 fichiers conky, tape dans ton terminal "conky -c .conkyrc1 && conky -c .conkyrc2".

Antoine974

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

des que je fais un

conky -- c

ou ta commande bha il me lance le conky et il se met a clignoter et pourquoi mon conky clignoter pas avant que je tape les commandes plus haut ??

edit: c'est deja le cas je le lance comme ça ... sinon il fait partie des mes progs au demarrage

Dernière modification par Antoine974 (Le 29/05/2008, à 20:00)

---

mon blog : www.poufctout.go1.cc
Home cinema : Nettop ION atom 330 sous XBMC
Samsung N510 ubuntu 9.10

terato

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Sur la doc de conky soi-même première ligne
http://conky.sourceforge.net/config_settings.html

En effet tu as raison.

Quel version de conky possèdes tu ?

Peu etre que cet option n'est accessible qu'a partir d'une certaine version car je dois dire que je vois pas le souci.

---

Mon bureau v1//v2//v3//v4

terato

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

@Antoine974

Pour lancer plusieurs conky en meme temps voici la manoeuvre:

Créer un nouveau document (clic droit/créer un document/document vierge), nommer le multiconky.sh (ou autre), ouvrer se document et copier ceci:

#!/bin/bash
killall conky
conky -c /home/<votre pseudo>/.conkyrc &
conky -c /home/<votre pseudo>/.conkyrc2 &
conky -c /home/<votre pseudo>/.conkyrc3 &
conky -c /home/<votre pseudo>/.conkyrc4 &
conky -c /home/<votre pseudo>/.conkyrc5 &

(Dans ce cas on ouvre 5 conky, mais tu peux en mettre uniquement 2.)

Maintenant il faut autorisé l'execution de se script:

clic droit/propriétés/permissions/ et cocher "autorisé l'execution de se fichiers comme un programme

Dernière modification par terato (Le 29/05/2008, à 22:42)

---

Mon bureau v1//v2//v3//v4

Antoine974

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

la j'ai cours pas le temps de tester j'essairai ce soir j'editerai pour le resultat merci

Tout fait comme tu as dit ( t'explique bien )et apres je fais quoi ?? car si je le lance dans un terminale apres double clique bha il ne passe rien ...

Ty

Dernière modification par Antoine974 (Le 30/05/2008, à 11:54)

---

mon blog : www.poufctout.go1.cc
Home cinema : Nettop ION atom 330 sous XBMC
Samsung N510 ubuntu 9.10

DeeTay

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Je suis désolé de poser une question qui a probablement déjà été posée, mais mon grand plaisir est d'avoir une grande panoplie de fonds d'écran qui tournent en permanence, et qui changent toutes les 2 minutes.

J'en ai des clairs, et des plus foncés... Et problème, Conky garde les mêmes couleurs

Du coup, quand j'ai du blanc sur du blanc, bah c'est illisible

Existe-t-il une solution pour que la couleur du texte change automatiquement en fonction du fond? (style, noir quand le fond est clair, et blanc quand il est foncé, ça me suffirait)...

Merci bien!

Lenezir

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Ça, ça m'étonnerait
Mais ce que tu peux faire c'est mettre un fond à ton Conky.
Comme ça il sera toujours lisible.

Dernière modification par Imoreion (Le 30/05/2008, à 08:30)

Mimetaster

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Je viens de me mettre à Conky, et un peu d'aide serait la bienvenue... Je souhaiterais afficher la température :
du processeur (pour l'instant, ça ne marche pas)
de la carte mère (idem)
du disque dur.

Edit : j'oubliai, voici mon conkyrc, il n'est que très peu modifié par rapport à celui de la doc...

# set to yes if you want Conky to be forked in the background
background no

cpu_avg_samples 2
net_avg_samples 2

out_to_console no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1

# Use Xft?
use_xft yes

# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=8

own_window_transparent yes
own_window_colour hotpink
# Text alpha when using Xft
xftalpha 0.8

on_bottom yes

# mail spool
mail_spool $MAIL

# Update interval in seconds
update_interval 1
# Create own window instead of using desktop (required in nautilus)
own_window no

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
#minimum_size 280 5
#maximum_width 150

# Draw shades?
draw_shades no

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders 10

# border margins
border_margin 4

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white

# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 13
gap_y 34
alignment top_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text

# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer no

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# boinc (seti) dir
# seti_dir /opt/seti

# Possible variables to be used:
#
#      Variable         Arguments                  Description                
#  acpiacadapter                     ACPI ac adapter state.                   
#  acpifan                           ACPI fan state                           
#  acpitemp                          ACPI temperature.                        
#  adt746xcpu                        CPU temperature from therm_adt746x       
#  adt746xfan                        Fan speed from therm_adt746x             
#  battery           (num)           Remaining capasity in ACPI or APM        
#                                    battery. ACPI battery number can be      
#                                    given as argument (default is BAT0).     
#  buffers                           Amount of memory buffered                
#  cached                            Amount of memory cached                  
#  color             (color)         Change drawing color to color            
#  cpu                               CPU usage in percents                    
#  cpubar            (height)        Bar that shows CPU usage, height is      
#                                    bar's height in pixels                   
#  downspeed         net             Download speed in kilobytes              
#  downspeedf        net             Download speed in kilobytes with one     
#                                    decimal                                  
#  exec              shell command   Executes a shell command and displays    
#                                    the output in torsmo. warning: this      
#                                    takes a lot more resources than other    
#                                    variables. I'd recommend coding wanted   
#                                    behaviour in C and posting a patch :-).  
#  execi             interval, shell Same as exec but with specific interval. 
#                    command         Interval can't be less than              
#                                    update_interval in configuration.        
#  fs_bar            (height), (fs)  Bar that shows how much space is used on 
#                                    a file system. height is the height in   
#                                    pixels. fs is any file on that file      
#                                    system.                                  
#  fs_free           (fs)            Free space on a file system available    
#                                    for users.                               
#  fs_free_perc      (fs)            Free percentage of space on a file       
#                                    system available for users.              
#  fs_size           (fs)            File system size                         
#  fs_used           (fs)            File system used space                   
#  hr                (height)        Horizontal line, height is the height in 
#                                    pixels                                   
#  i2c               (dev), type, n  I2C sensor from sysfs (Linux 2.6). dev   
#                                    may be omitted if you have only one I2C  
#                                    device. type is either in (or vol)       
#                                    meaning voltage, fan meaning fan or temp 
#                                    meaning temperature. n is number of the  
#                                    sensor. See /sys/bus/i2c/devices/ on     
#                                    your local computer.                     
#  kernel                            Kernel version                           
#  loadavg           (1), (2), (3)   System load average, 1 is for past 1     
#                                    minute, 2 for past 5 minutes and 3 for   
#                                    past 15 minutes.                         
#  machine                           Machine, i686 for example                
#  mails                             Mail count in mail spool. You can use    
#                                    program like fetchmail to get mails from 
#                                    some server using your favourite         
#                                    protocol. See also new_mails.            
#  mem                               Amount of memory in use                  
#  membar            (height)        Bar that shows amount of memory in use   
#  memmax                            Total amount of memory                   
#  memperc                           Percentage of memory in use              
#  new_mails                         Unread mail count in mail spool.         
#  nodename                          Hostname                                 
#  outlinecolor      (color)         Change outline color                     
#  pre_exec          shell command   Executes a shell command one time before 
#                                    torsmo displays anything and puts output 
#                                    as text.                                 
#  processes                         Total processes (sleeping and running)   
#  running_processes                 Running processes (not sleeping),        
#                                    requires Linux 2.6                       
#  shadecolor        (color)         Change shading color                     
#  stippled_hr       (space),        Stippled (dashed) horizontal line        
#                    (height)        
#  swapbar           (height)        Bar that shows amount of swap in use     
#  swap                              Amount of swap in use                    
#  swapmax                           Total amount of swap                     
#  swapperc                          Percentage of swap in use                
#  sysname                           System name, Linux for example           
#  time              (format)        Local time, see man strftime to get more 
#                                    information about format                 
#  totaldown         net             Total download, overflows at 4 GB on     
#                                    Linux with 32-bit arch and there doesn't 
#                                    seem to be a way to know how many times  
#                                    it has already done that before torsmo   
#                                    has started.                             
#  totalup           net             Total upload, this one too, may overflow 
#  updates                           Number of updates (for debugging)        
#  upspeed           net             Upload speed in kilobytes                
#  upspeedf          net             Upload speed in kilobytes with one       
#                                    decimal                                  
#  uptime                            Uptime                                   
#  uptime_short                      Uptime in a shorter format               
#
#  seti_prog                         Seti@home current progress
#  seti_progbar      (height)        Seti@home current progress bar
#  seti_credit                       Seti@hoome total user credit


# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument
#${font Dungeon:style=Bold:pixelsize=10}I can change the font as well
#${font Verdana:size=10}as many times as I choose
#${font Perry:size=10}Including UTF-8,
#${font Luxi Mono:size=10}justo como este texto que o google traduz fêz o português
# stuff after 'TEXT' will be formatted on screen
#${font Grunge:size=12}${time %a  %b  %d}${alignr -25}${time %k:%M}

TEXT
$nodename - $sysname $kernel on $machine
$stippled_hr
${color lightgrey}Uptime:$color $uptime ${color lightgrey}- Load:$color $loadavg
${color lightgrey}CPU Usage:${color #5000a0} ${cpu}% ${cpubar}
${color black}${cpugraph 000000 5000a0}
${color lightgrey}RAM Usage:$color $mem/$memmax - $memperc% $membar
${color lightgrey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar}
${color lightgrey}Processes:$color $processes  ${color grey}Running:$color $running_processes
$color$stippled_hr
${color lightgrey}Networking:
 Down:${color #8844ee} ${downspeed eth0} k/s${color lightgrey} ${offset 70}Up:${color #22ccff} ${upspeed eth0} k/s
${color black}${downspeedgraph eth0 32,150 ff0000 0000ff} $alignr${color black}${upspeedgraph eth0 32,150 0000ff ff0000}
${color lightgrey}File systems:
 / $color${fs_used /}/${fs_size /} ${fs_bar /}
${color lightgrey}Temperatures:
 CPU:$color ${i2c temp 2}C${color grey} - MB:$color ${i2c temp 1}C
${font Dungeon:style=Bold:pixelsize=12}${color #88aadd}Music Player Daemon: ${alignc}$mpd_artist - $mpd_title
${color #88aadd}$mpd_bar
${color #88aadd}${alignc}$mpd_status
${color}Name              PID     CPU%   MEM%
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color}Mem usage
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}

${color #FFFFFF} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color #FFFFFF} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color #FFFFFF} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
${color #FFFFFF} ${top_mem name 4} ${top_mem pid 4} ${top_mem cpu 4} ${top_mem mem 4}

Dernière modification par Mimetaster (Le 30/05/2008, à 12:59)

Lenezir

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Voici toutes les variables existantes : http://conky.sourceforge.net/variables.html

Dernière modification par Imoreion (Le 30/05/2008, à 13:01)

terato

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Va voir la page 50( http://forum.ubuntu-fr.org/viewtopic.php?id=99471&p=50 )

J'ai detailler tout ce qu'il faut faire pour obtenir les températures etc...

Et voici un site qui te permettra de voir également toutes les variables etc...

http://www.pcinpact.com/forum/index.php?showtopic=97542

Bon courage.

---

Mon bureau v1//v2//v3//v4

Mimetaster

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Génial! J'ai toutes les données que je souhaitais affichées, mis à part la carte graphique, comme c'est pas une nvidia... c'est un chipset intel... C'est pas dramatique, le principal y est.

Une question, j'ai pas trouvé ou réduire la largeur de la page, je suis en train de chercher là...

Ekinoks

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Salut !

Voici mon conky :

.conkyrc

#emplacement
alignment top_right

#pour que corky tourne en arriere plan
background yes

#nombre d'echantillons a utiliser pour calculer la moyenne d'utilisation
cpu_avg_samples 4
net_avg_samples 4

#affiche le texte sur la sortie standard
out_to_console no

# Utiliser Xft (polices lissées etc)
use_xft yes

#police a utiliser : use_xft doit etre a "yes"
xftfont DejaVu Sans Bold:style=Bold:pixelsize=11





# utiliser sa propre fenetre ?
own_window yes

#type de fenetre : normal(avec le cadre) / override / desktop
own_window_type override

#pseudo transparence?
own_window_transparent yes

# taux de raffraichissement de la fenetre (en secondes)
update_interval 1

# pour eviter le clignotement de la semaine (fonctionne pas chez moi)
double_buffer yes

# afficher les ombres?
draw_shades no

# afficher des contours ?
draw_outline no

#contours autour des blocs de texte?
draw_borders no

# contour en trait-tillés, longueur d'un trait en pixels
stippled_borders 5

#largeur des marges (n'a pas l'air de fonctionner)
border_margin 40

# largeur du contour
border_width 1

# couleur par defaut du texte, de l'ombre et du contour

#color1 ae0606	# ecriture active
color1 d51621	# ecriture active
color0 d4d4d4	# ecriture pasive
#color2 9b0606	#graphe 1
color2 bf2222	#graphe 1
color3 056444	#graphe 2
default_shade_color white
default_outline_color white

# ecart avec le bord x=gauche ou droit y= haut ou bas
gap_x 05
gap_y 30

# Ajoute des espaces apres certains objets pour eviter de les faire bouger.
# Fonctionne uniquement avec la police Monospace
use_spacer no

# Soustraire les mémoires tampons de la mémoire utiliser ?
no_buffers no

# Tout le texte en majuscule ?
uppercase no

TEXT 
${alignc}${color0}Bonjour ${color1}${exec whoami}
${color0}Nombre de mail : ${color1}${pop3_unseen pop.gmail.com Login Pass -p 995}${color0}
${color0}L'ordinateur est sous tension depuis : ${color1}$uptime
${color0}Version : ${color1}${texeci 3600 cat /etc/lsb-release | grep RELEASE | cut -d= -f2}${color0} Nom de code : ${color1}${texeci 3600 cat /etc/lsb-release | grep CODENAME | cut -d= -f2}
${color0}Version du noyau : ${color1}$kernel ${color0}Architecture : ${color1}$machine
${color0}Paquets installés : ${color1}${texeci 900 dpkg -l | wc -l}${color0}/${color1}${texeci 900 apt-cache stats | grep "total de" | cut -d":" -f2 | cut -d"(" -f1 | sed "s# ##g"}
${color0}Espace gaspillés par les paquets : ${color1}${texeci 1800 apt-cache stats | grep "gaspill" | cut -d":" -f2 | cut -d"(" -f1 | sed "s# ##g"}
${color2}${stippled_hr}
${color0}${font Webdings:style=Regular:pixelsyze=8}i${font}Processeur :
${color0}Modèle :${color1}${texeci 60000 cat /proc/cpuinfo | grep "model name" | sort -u | cut -d":" -f2 | sed "s#  ##g"}
${color0}Charge CPU : ${color1}${loadavg 1}
${color0}Il y a ${color1}$processes ${color0}processus dont ${color1}$running_processes${color0} en cours de traitement
${offset 40}${color0}Nom ${alignr 40}PID ${alignr 30}CPU%${alignr 15}MEM%
${offset 40}${color1}${top name 1} ${alignr 45}${top pid 1} ${alignr 30}${top cpu 1} ${alignr 15}${top mem 1}
${offset 40}${color0}${top name 2} ${alignr 45}${top pid 2} ${alignr 30}${top cpu 2} ${alignr 15}${top mem 2}
${offset 40}${color0}${top name 3} ${alignr 45}${top pid 3} ${alignr 30}${top cpu 3} ${alignr 15}${top mem 3}
${offset 40}${color0}${top name 4} ${alignr 45}${top pid 4} ${alignr 30}${top cpu 4} ${alignr 15}${top mem 4}

${color0}Coeur 1: Temperature: ${color1}${texeci 60 sensors | grep "Core 0" | cut -d"+" -f2 | cut -d"(" -f1 | sed "s# ##g"}${color0}${alignr}Utilisation: ${color1}${cpu cpu1}${color0}%
${color2}${cpugraph cpu1 15,280}
${color0}Coeur 2: Temperature: ${color1}${texeci 60 sensors | grep "Core 1" | cut -d"+" -f2 | cut -d"(" -f1 | sed "s# ##g"}${color0}${alignr}Utilisation: ${color1}${cpu cpu2}${color0}%
${color2}${cpugraph cpu2 15,280}
${color0}Coeur 3: Temperature: ${color1}${texeci 60 sensors | grep "Core 2" | cut -d"+" -f2 | cut -d"(" -f1 | sed "s# ##g"}${color0}${alignr}Utilisation: ${color1}${cpu cpu3}${color0}%
${color2}${cpugraph cpu3 15,280}
${color0}Coeur 4: Temperature: ${color1}${texeci 60 sensors | grep "Core 3" | cut -d"+" -f2 | cut -d"(" -f1 | sed "s# ##g"}${color0}${alignr}Utilisation: ${color1}${cpu cpu4}${color0}%
${color2}${cpugraph cpu4 15,280}
${color2}${stippled_hr}
${color0}${font Webdings:style=Regular:pixelsyze=8}i${font}Mémoire :
${color0}Utilisation de la swap : ${alignc}${color1}${swap}${color0}/${color1}${swapmax}${alignr}${swapperc}${color0}%
${color2}${swapbar 8}
${color2}${stippled_hr}
${color0}${font Webdings:style=Regular:pixelsyze=8}i${font}Disques
${color0}Température du disque dur interne: ${color1}${texeci 10 hddtemp /dev/sda | cut -d":" -f3 | sed "s# ##g"}
${color0}Utilisation des partitions/disques : ${color1}${diskio}/s
${color2}${diskiograph 15,280 yellow brown}

${color0}Ubuntu :${alignc}${color1}${fs_used /}${color0} / ${color1}${fs_size /}${alignr}${fs_used_perc /}${color0}%
${color2}${fs_bar 8 /}
${color0}home :${alignc}${color1}${fs_used /home}${color0} / ${color1}${fs_size /home}${alignr}${fs_used_perc /home}${color0}%
${color2}${fs_bar 8 /home}
${color0}Donnees:${alignc}${color1}${fs_used /media/Data}${color0} / ${color1}${fs_size /media/Data}${alignr}${fs_used_perc /media/Data}${color0}%
${color2}${fs_bar 8 /media/Data}
${color0}CORSAIR :${alignc}${if_mounted /media/CORSAIR}${color1}${fs_used /media/CORSAIR}${color0} / ${color1}${fs_size /media/CORSAIR}${alignr}${fs_used_perc /media/CORSAIR}${color0}%
${color2}${fs_bar 8 /media/CORSAIR}${else}${color1} NON CONNECTE$endif
${color2}${stippled_hr}
${color0}${font Webdings:style=Regular:pixelsyze=8}i${font}Réseau
${color0}@ IP : ${color1}${execi 60 wget -O - http://ip.tupeux.com | tail}
${color0}Il y a ${color1}${tcp_portmon 1 65535 count}${color0} connexion(s) active(s)
${color0}dont ${color1}${tcp_portmon 1 32767 count}${color0} entrantes(s) et ${color1}${tcp_portmon 32768 65535 count}${color0} sortante(s)
${color0}Il y a ${color1}${texeci 180 ps aux | grep "sshd:" | grep pts | grep -v grep | wc -l} ${color0}sessions ouvertes par SSH

${color0}Total téléchargé : ${color3}${totaldown eth1}${alignr}${color0}Total envoyé : ${color1}${totalup eth1}
${color0}Reception: ${color3}${downspeedf eth1}Ko/s${alignr}${color0}Envois: ${color1}${upspeedf eth1}Ko/s
${color3}${downspeedgraph eth1 25,139 color3 color3}${alignr}${color2}${upspeedgraph eth1 25,139 color2 color2}
${color2}${stippled_hr}
${color0}${font Webdings:style=Regular:pixelsyze=8}i${font}aMule (${color3}${texeci 5 amulecmd -c status | awk '/ > Download:/ { print $3$4}'}${color0} / ${color1}${texeci 5 amulecmd -c status | awk '/ > Upload:/ { print $3$4}'}${color0})${execi 5 amulecmd -c "show dl" | awk -f ~/filtre.awk | sort -k 2 -r > ~/tmp}
${color0}${if_empty ${exec awk 'NR==1{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==1{ print $1 }' tmp} ${if_empty ${exec awk 'NR==1{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==1{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==1{ print $2 }' tmp}${endif}
${color0}${if_empty ${exec awk 'NR==2{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==2{ print $1 }' tmp} ${if_empty ${exec awk 'NR==2{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==2{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==2{ print $2 }' tmp}${endif}
${color0}${if_empty ${exec awk 'NR==3{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==3{ print $1 }' tmp} ${if_empty ${exec awk 'NR==3{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==3{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==3{ print $2 }' tmp}${endif}
${color0}${if_empty ${exec awk 'NR==4{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==4{ print $1 }' tmp} ${if_empty ${exec awk 'NR==4{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==4{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==4{ print $2 }' tmp}${endif}
${color0}${if_empty ${exec awk 'NR==5{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==5{ print $1 }' tmp} ${if_empty ${exec awk 'NR==5{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==5{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==5{ print $2 }' tmp}${endif}
${color0}${if_empty ${exec awk 'NR==6{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==6{ print $1 }' tmp} ${if_empty ${exec awk 'NR==6{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==6{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==6{ print $2 }' tmp}${endif}
${color0}${if_empty ${exec awk 'NR==7{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==7{ print $1 }' tmp} ${if_empty ${exec awk 'NR==7{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==7{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==7{ print $2 }' tmp}${endif}
${color0}${if_empty ${exec awk 'NR==8{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==8{ print $1 }' tmp} ${if_empty ${exec awk 'NR==8{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==8{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==8{ print $2 }' tmp}${endif} 
${color0}${if_empty ${exec awk 'NR==9{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==9{ print $1 }' tmp} ${if_empty ${exec awk 'NR==9{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==9{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==9{ print $2 }' tmp}${endif}
${color0}${if_empty ${exec awk 'NR==10{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==10{ print $1 }' tmp} ${if_empty ${exec awk 'NR==10{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==10{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==10{ print $2 }' tmp}${endif}
${color0}${if_empty ${exec awk 'NR==11{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==11{ print $1 }' tmp} ${if_empty ${exec awk 'NR==11{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==11{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==11{ print $2 }' tmp}${endif}
${color0}${if_empty ${exec awk 'NR==12{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==12{ print $1 }' tmp} ${if_empty ${exec awk 'NR==12{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==12{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==12{ print $2 }' tmp}${endif}
${color0}${if_empty ${exec awk 'NR==13{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==13{ print $1 }' tmp} ${if_empty ${exec awk 'NR==13{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==13{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==13{ print $2 }' tmp}${endif}
${color0}${if_empty ${exec awk 'NR==14{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==14{ print $1 }' tmp} ${if_empty ${exec awk 'NR==14{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==14{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==14{ print $2 }' tmp}${endif}
${color0}${if_empty ${exec awk 'NR==15{ print $1 }' tmp}}${else}${texeci 5 awk 'NR==15{ print $1 }' tmp} ${if_empty ${exec awk 'NR==15{ print $3 }' tmp}}${else}(${color3}${texeci 5 awk 'NR==15{ print $3 }' tmp}${color0})${endif}${color3}${alignr 90}${execibar 5 awk 'NR==15{ print $2 }' tmp}${endif}

filtre.awk

/^ > [^\t]/	{ 
	dejaEcrit = 0;
	for (i=3;i<=NF&&dejaEcrit<20;i++) {
		printf("%s", (length($i) > 20-dejaEcrit) ? substr($i,1,23-dejaEcrit)"..." : $i);
		dejaEcrit += length($i)
	}
	printf("\t");
	
	next;
}
					
					
/^ > \t/	{
	printf("%s", (length($2) < 7) ? "0"substr($2,2,3) : substr($2,2,4));
}

					
/^ > \t.*\/s/	{
	printf("\t%s", $(NF-1)$(NF));
}

/^ > /	{
	printf("\n");
}

Dernière modification par Ekinoks (Le 02/06/2008, à 18:47)

DeeTay

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Bon, tant pis pour les couleurs qui changent... Je ferai peut-être un script un de ces 4 pour changer le .conkyirc en fonction du fond d'écran... Je verrai.

En attendant, Ekinoks, tu veux bien poster ton fond d'écran?

Ekinoks

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

En attendant, Ekinoks, tu veux bien poster ton fond d'écran?

Yep ! le voila :

Antoine974

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

plop,
j'aimerais retrouver mon conky
svp ne m'oubliez pas

@Imoreion : Tout fait comme tu as dit ( t'explique bien )et apres je fais quoi ?? car si je le lance dans un terminale apres double clique bha il ne passe rien ...

---

mon blog : www.poufctout.go1.cc
Home cinema : Nettop ION atom 330 sous XBMC
Samsung N510 ubuntu 9.10

Lenezir

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

Normalement la commande que je t'ai donné doit lancer tes Conky.
Bon je vais reprendre en détail.
Alors dans ton dossier personnel tu dois mettre tous tes fichiers .conkyrc (si tu en as deux, nomme-les ".conkyrc1" et ".conkyrc2").
Après tu vas créer un script qui va permettre, une fois lancé, de lancer tes deux fichiers conky.

#!/bin/bash
killall conky &&
sleep 15 &&
conky -c /home/<ton pseudo>/.conkyrc &&
conky -c /home/<ton pseudo>/.conkyrc2;

Nomme ce fichier ".startconky.sh", place-le dans ton dossier personnel, et fais dans un terminal

chmod +x /home/<ton pseudo>/.startconky.sh

Après si tu veux lancer tes Conky au démarrage, tu vas dans Système -> Préférences -> Sessions, et tu vas ajouter un programme de démarrage, lequel va renvoyer vers ton fichier .startconky.sh.

Sinon pour le lancer manuellement, tape dans ton terminal

./.startconky.sh

Et voilà

Dernière modification par Imoreion (Le 31/05/2008, à 18:32)

Antoine974

Re : Conky : Postez vos conkyrc ou certaines parties intéressantes

c'est cette partie la que j'ai du mal le reste je sais faire enfin je crois

Alors dans ton dossier personnel tu dois mettre tous tes fichiers .conkyrc (si tu en as deux, nomme-les ".conkyrc1" et ".conkyrc2")

dsl je me trouve un peu nul la

---

mon blog : www.poufctout.go1.cc
Home cinema : Nettop ION atom 330 sous XBMC
Samsung N510 ubuntu 9.10