Pages : 1
#1 Le 30/01/2006, à 10:24
- johanjohan
DualHead non reconnu
Salut,
Donc j'essaye de faire un double écran.
j'ai une Quadro4 900xgl avec deux sorties pour deux écrans crt: 1 de 19" (un Flatron915FT) et un de 17" (un SyncMaster)
J'aimerai mettre le 1er en 85 Hz ¦ 1280 x 1024 et le 2eme en 1024 x 768 en 85Hz.
j'essaye de configurer mon xorg.conf, mais seul le 17" est reconnu lors du démarage de X.
où est l'erreur?
merci pour votre aide
voici mon xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV25GL [Quadro4 900 XGL]"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "ConnectedMonitor" "crt,crt"
Option "TwinView" "1"
Option "MetaModes" "1280x1024, 1280x1024; 1024x768, 1024x768"
Option "SecondMonitorHorizSync" "65-85"
Option "SecondMonitorVertRefresh" "50-160"
Option "TwinViewOrientation" "RightOf"
Option "Xinerama" "Off"
EndSection
Section "Monitor"
Identifier "Flatron915FT"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV25GL [Quadro4 900 XGL]"
Monitor "Flatron915FT"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
Option "Xinerama" "Off"
EndSection
Section "DRI"
Mode 0666
EndSection
Hors ligne
#2 Le 01/02/2006, à 01:59
- johanjohan
Re : DualHead non reconnu
Up
je sais qu'il y a pas mal de messages sur ce sujet la.
Mais pourquoi je n'arrive pas à garder quand j'essaye de modifier mon xorg.conf lors du démmarage de X?
merci
Hors ligne
Pages : 1