#1 Le 16/12/2014, à 23:52
- souen
(résolu) installation d'ubuntu sur un acer aspire xc - 105
Bonjoir,
j'ai voulu installer sur un ordinateur de bureau la version 14.04.1 d'ubuntu en effaçant windows8
mais au redémarrage après l'installation, j'ai toujours le même message : reboot and select proper boot device
or insert boot media in selected boot device and press a key il a redémarré correctement la 1ère fois puis ce message
s'est affiché.
voici mon boot-info : http://paste.ubuntu.com/9544147/
Quelqu'un verrait-il le problème?
Dernière modification par souen (Le 18/12/2014, à 11:28)
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#2 Le 17/12/2014, à 00:42
- moko138
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20140113
Boot sector info: Syslinux looks at sector 1285376 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,946,320,895 1,945,270,272 Data partition (Linux)
/dev/sda3 1,946,320,896 1,953,523,711 7,202,816 Swap partition (Linux)
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 7742 MB, 7742685184 bytes
39 heads, 39 sectors/track, 9942 cylinders, total 15122432 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 8,064 15,122,431 15,114,368 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 4EEE-5B0B vfat
/dev/sda2 13446df2-5eff-4cd2-a244-85aa8ef3e45d ext4
/dev/sda3 12449044-6860-4ab9-846d-724f82401ad3 swap
/dev/sdc1 5B2A-ABA4 vfat
/dev/zram0 0fb318bd-2a06-40ef-b8fd-16ae562a8389 swap
/dev/zram1 ff027ee6-d1f3-4b51-85be-033b529f56cf swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Dec 16 21:27 ata-HL-DT-ST_DVDRAM_GHA2N_KECD8G85000 -> ../../sr0
lrwxrwxrwx 1 root root 9 Dec 16 21:27 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5342039 -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 16 21:27 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5342039-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 16 21:27 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5342039-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 16 21:27 ata-WDC_WD10EZEX-22RKKA0_WD-WCC1S5342039-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 Dec 16 21:27 usb-Multiple_Card_Reader_058F63666485-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 9 Dec 16 21:27 usb-TDK_LoR_TF10_07074106CF078099-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Dec 16 21:27 usb-TDK_LoR_TF10_07074106CF078099-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 Dec 16 21:27 wwn-0x50014ee208efdaea -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 16 21:27 wwn-0x50014ee208efdaea-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 16 21:27 wwn-0x50014ee208efdaea-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 16 21:27 wwn-0x50014ee208efdaea-part3 -> ../../sda3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdc1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 13446df2-5eff-4cd2-a244-85aa8ef3e45d
else
search --no-floppy --fs-uuid --set=root 13446df2-5eff-4cd2-a244-85aa8ef3e45d
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-13446df2-5eff-4cd2-a244-85aa8ef3e45d' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 13446df2-5eff-4cd2-a244-85aa8ef3e45d
else
search --no-floppy --fs-uuid --set=root 13446df2-5eff-4cd2-a244-85aa8ef3e45d
fi
linux /boot/vmlinuz-3.13.0-43-generic.efi.signed root=UUID=13446df2-5eff-4cd2-a244-85aa8ef3e45d ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-43-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-13446df2-5eff-4cd2-a244-85aa8ef3e45d' {
menuentry 'Ubuntu, with Linux 3.13.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-43-generic-advanced-13446df2-5eff-4cd2-a244-85aa8ef3e45d' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 13446df2-5eff-4cd2-a244-85aa8ef3e45d
else
search --no-floppy --fs-uuid --set=root 13446df2-5eff-4cd2-a244-85aa8ef3e45d
fi
echo 'Loading Linux 3.13.0-43-generic ...'
linux /boot/vmlinuz-3.13.0-43-generic.efi.signed root=UUID=13446df2-5eff-4cd2-a244-85aa8ef3e45d ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-43-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-43-generic-recovery-13446df2-5eff-4cd2-a244-85aa8ef3e45d' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 13446df2-5eff-4cd2-a244-85aa8ef3e45d
else
search --no-floppy --fs-uuid --set=root 13446df2-5eff-4cd2-a244-85aa8ef3e45d
fi
echo 'Loading Linux 3.13.0-43-generic ...'
linux /boot/vmlinuz-3.13.0-43-generic.efi.signed root=UUID=13446df2-5eff-4cd2-a244-85aa8ef3e45d ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-43-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-13446df2-5eff-4cd2-a244-85aa8ef3e45d' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 13446df2-5eff-4cd2-a244-85aa8ef3e45d
else
search --no-floppy --fs-uuid --set=root 13446df2-5eff-4cd2-a244-85aa8ef3e45d
fi
echo 'Loading Linux 3.13.0-32-generic ...'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=13446df2-5eff-4cd2-a244-85aa8ef3e45d ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-13446df2-5eff-4cd2-a244-85aa8ef3e45d' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 13446df2-5eff-4cd2-a244-85aa8ef3e45d
else
search --no-floppy --fs-uuid --set=root 13446df2-5eff-4cd2-a244-85aa8ef3e45d
fi
echo 'Loading Linux 3.13.0-32-generic ...'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=13446df2-5eff-4cd2-a244-85aa8ef3e45d ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-32-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 4EEE-5B0B
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=13446df2-5eff-4cd2-a244-85aa8ef3e45d / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
#UUID=4EEE-5B0B /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=12449044-6860-4ab9-846d-724f82401ad3 none swap sw 0 0
UUID=4EEE-5B0B /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Boot-Repair-Disk session" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 300
ui gfxboot bootlogo
--------------------------------------------------------------------------------
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/2075/mounts) leaked on lvs invocation. Parent PID 10965: bash
File descriptor 63 (pipe:[27472]) leaked on lvs invocation. Parent PID 10965: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-12-16__21h27 ===================
boot-repair version : 4ppa14
boot-sav version : 4ppa14
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa14
File descriptor 9 (/proc/2075/mounts) leaked on lvs invocation. Parent PID 4661: /bin/sh
No volume groups found
boot-repair is executed in live-session (Boot-Repair-Disk 64bit 29nov2014, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="4EEE-5B0B" TYPE="vfat"
/dev/sda2: UUID="13446df2-5eff-4cd2-a244-85aa8ef3e45d" TYPE="ext4"
/dev/sda3: UUID="12449044-6860-4ab9-846d-724f82401ad3" TYPE="swap"
/dev/sdc1: UUID="5B2A-ABA4" TYPE="vfat"
/dev/zram0: UUID="0fb318bd-2a06-40ef-b8fd-16ae562a8389" TYPE="swap"
/dev/zram1: UUID="ff027ee6-d1f3-4b51-85be-033b529f56cf" TYPE="swap"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== sda2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Jul 22 22:21 grub.d
total 76
-rwxr-xr-x 1 root root 9424 May 15 2014 00_header
-rwxr-xr-x 1 root root 6058 May 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 May 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 May 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 Mar 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 May 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 May 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 May 15 2014 40_custom
-rwxr-xr-x 1 root root 216 May 15 2014 41_custom
-rw-r--r-- 1 root root 483 May 15 2014 README
=================== sda2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=4EEE-5B0B (sda1)
efibootmgr -v
BootCurrent: 0004
Timeout: 2 seconds
BootOrder: 0005,0004,0003
Boot0003 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...e................
Boot0004 UEFI: TDK LoR TF10 PMAP ACPI(a0341d0,0)PCI(10,0)USB(4,0)HD(1,1f80,e6a080,0000fa8f)..BO
Boot0005* UEFI: WDC WD10EZEX-22RKKA0 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,efe613f1-f199-495c-9951-150cba418314)..BO
=================== UEFI/Legacy mode:
Unusual EFI: Please report this message to boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD10EZEX-22R (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 997GB 996GB ext4
3 997GB 1000GB 3688MB linux-swap(v1)
Model: TDK LoR TF10 (scsi)
Disk /dev/sdc: 7743MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 4129kB 7743MB 7739MB primary fat32 boot, lba
Error: /dev/zram0: unrecognised disk label
Error: /dev/zram1: unrecognised disk label
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA WDC WD10EZEX-22R;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:997GB:996GB:ext4::;
3:997GB:1000GB:3688MB:linux-swap(v1)::;
BYT;
/dev/sdc:7743MB:scsi:512:512:msdos:TDK LoR TF10;
1:4129kB:7743MB:7739MB:fat32::boot, lba;
Error: /dev/zram0: unrecognised disk label
Error: /dev/zram1: unrecognised disk label
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdc1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=lubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hidraw3 hidraw4 hidraw5 hpet input kmsg kvm log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdc sdc1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
ls /mnt/boot-sav/sda1/1:
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 0b 5b ee 4e 4e 4f 20 4e 41 4d 45 20 20 |..).[.NNO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1.7G 6.2M 1.7G 1% /
udev devtmpfs 1.7G 12K 1.7G 1% /dev
tmpfs tmpfs 332M 1.2M 331M 1% /run
/dev/sdc1 vfat 7.2G 1.6G 5.6G 23% /cdrom
/dev/loop0 squashfs 549M 549M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.7G 8.0K 1.7G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.7G 0 1.7G 0% /run/shm
none tmpfs 100M 16K 100M 1% /run/user
/dev/sda1 vfat 511M 3.4M 508M 1% /mnt/boot-sav/sda1
/dev/sda2 ext4 913G 4.3G 863G 1% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0b058a0c
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdc: 7742 MB, 7742685184 bytes
39 heads, 39 sectors/track, 9942 cylinders, total 15122432 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000fa8f
Device Boot Start End Blocks Id System
/dev/sdc1 * 8064 15122431 7557184 c W95 FAT32 (LBA)
=================== Recommended repair
The default repair of the Boot-Repair utility will reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair will be performed: unhide-bootmenu-10s
/boot/efi added in sda2/fstab
Mount sda1 on /mnt/boot-sav/sda2/boot/efi
ls /mnt/boot-sav/sda2/boot/efi/1:
Unhide GRUB boot menu in sda2/etc/default/grub
*******lspci -nnk | grep -iA3 vga
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8240] [1002:9838]
Subsystem: Acer Incorporated [ALI] Device [1025:0800]
Kernel driver in use: radeon
00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:9840]
*******
grub-install --version
grub-install (GRUB) 2.02~beta2-9ubuntu1,grub-install (GRUB) 2.
chroot /mnt/boot-sav/sda2 efibootmgr -v
BootCurrent: 0004
Timeout: 2 seconds
BootOrder: 0005,0004,0003
Boot0003 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...e................
Boot0004 UEFI: TDK LoR TF10 PMAP ACPI(a0341d0,0)PCI(10,0)USB(4,0)HD(1,1f80,e6a080,0000fa8f)..BO
Boot0005* UEFI: WDC WD10EZEX-22RKKA0 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,efe613f1-f199-495c-9951-150cba418314)..BO
chroot /mnt/boot-sav/sda2 uname -r
Kernel: 3.13.0-32-generic
Reinstall the grub-efi-amd64-signed of sda2
Installing for x86_64-efi platform.
Installation finished. No error reported.
grub-install --efi-directory=/boot/efi --target=x86_64-efi --uefi-secure-boot : exit code of grub-install :0
ls /mnt/boot-sav/sda2/boot/efi/1:
Add /mnt/boot-sav/sda2/boot/efi efi entries in /mnt/boot-sav/sda2/etc/grub.d/25_custom
Adding custom /mnt/boot-sav/sda2/boot/efi/EFI/ubuntu/MokManager.efi
efibootmgr -v
BootCurrent: 0004
Timeout: 2 seconds
BootOrder: 0000,0005,0004,0003
Boot0000* ubuntu HD(1,800,100000,efe613f1-f199-495c-9951-150cba418314)File(EFIubuntushimx64.efi)
Boot0003 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...e................
Boot0004 UEFI: TDK LoR TF10 PMAP ACPI(a0341d0,0)PCI(10,0)USB(4,0)HD(1,1f80,e6a080,0000fa8f)..BO
Boot0005* UEFI: WDC WD10EZEX-22RKKA0 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,efe613f1-f199-495c-9951-150cba418314)..BO
chroot /mnt/boot-sav/sda2 efibootmgr -v
BootCurrent: 0004
Timeout: 2 seconds
BootOrder: 0000,0005,0004,0003
Boot0000* ubuntu HD(1,800,100000,efe613f1-f199-495c-9951-150cba418314)File(EFIubuntushimx64.efi)
Boot0003 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...e................
Boot0004 UEFI: TDK LoR TF10 PMAP ACPI(a0341d0,0)PCI(10,0)USB(4,0)HD(1,1f80,e6a080,0000fa8f)..BO
Boot0005* UEFI: WDC WD10EZEX-22RKKA0 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,efe613f1-f199-495c-9951-150cba418314)..BO
chroot /mnt/boot-sav/sda2 update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.13.0-43-generic
Found initrd image: /boot/initrd.img-3.13.0-43-generic
Found linux image: /boot/vmlinuz-3.13.0-32-generic
Found initrd image: /boot/initrd.img-3.13.0-32-generic
Adding boot menu entry for EFI firmware configuration
Unhide GRUB boot menu in sda2/boot/grub/grub.cfg
Boot successfully repaired.
You can now reboot your computer.
Please do not forget to make your BIOS boot on sda1/EFI/ubuntu/shimx64.efi file!
Souen, un boot-info c'était très bien. Pourquoi n'as-tu pas attendu un spécialiste de l'UEFI avant de lancer la réparation ?
As-tu appliqué la dernière ligne du rapport ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 17/12/2014, à 08:41
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Bonjour moko138, j'ai voulu essayer de faire la réparation par défaut pour voir si
ça marchait. Vu qu'il n'y a qu'un seul système je pensais que ça marcherait.
Pour la dernière ligne : Please do not forget to make your BIOS boot on sda1/EFI/ubuntu/shimx64.efi file!
Dans la priorité du démarrage au niveau du bios c'est bien le disque dur qui amorce.
Dernière modification par souen (Le 17/12/2014, à 08:58)
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#5 Le 17/12/2014, à 12:09
- moko138
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Contacte malbo, lui saura te guider.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#6 Le 17/12/2014, à 12:24
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
oui, j'espère qu'il passera par ici.
Sinon je me demande si je suis concerné par ça?
http://forum.ubuntu-fr.org/viewtopic.php?id=1740971
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#7 Le 17/12/2014, à 12:38
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
bon j'ai tenté ce qui était proposé http://forum.ubuntu-fr.org/viewtopic.php?id=1740971
et ça n'a pas marché.
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#8 Le 17/12/2014, à 12:44
- nany
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Bonjour,
en effet, ça ressemble à un bridage. On peut voir d’après le rapport Boot-Info qu’il reste une entrée Windows Boot Manager et le message d’erreur au démarrage laisse à penser que c’est sur cette entrée que l’ordi démarre. Or, comme il n’y a plus de partition Windows, celui-ci renvoie le message d’erreur.
Peux-tu s’il te plaît, depuis une session live, donner le retour de la commande suivante ?
sudo efibootmgr -v
Hors ligne
#9 Le 17/12/2014, à 13:13
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
bonjour nany
voici
lubuntu@lubuntu:~$ sudo efibootmgr -v
BootCurrent: 0004
Timeout: 2 seconds
BootOrder: 0005,0004,0003
Boot0003 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...e................
Boot0004 UEFI: TDK LoR TF10 PMAP ACPI(a0341d0,0)PCI(10,0)USB(4,0)HD(1,1f80,e6a080,0000fa8f)..BO
Boot0005* UEFI: WDC WD10EZEX-22RKKA0 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,efe613f1-f199-495c-9951-150cba418314)..BO
lubuntu@lubuntu:~$
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#10 Le 17/12/2014, à 13:59
- nany
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Eh bien voilà, l’entrée Windows Boot Manager est toujours là. Et le pire est que les opérations effectuées par Boot-Repair semblent avoir été annulées. Le lien du rapport Boot-Info de ta deuxième tentative nous en dirait peut-être davantage.
Je te propose, dans un premier temps, de tenter de supprimer l’entrée WBM :
sudo efibootmgr -b 0003 -B
Puis d’appliquer la « méthode maxire » dont parle ikewdu dans le fil de malbo et que je recopie ici :
sudo mount /dev/sda2 /mnt
sudo mount /dev/sda1 /mnt/boot/efi
for i in /dev /dev/pts /proc /sys; do sudo mount -B $i /mnt$i; done
sudo cp /etc/resolv.conf /mnt/etc/
modprobe efivars
sudo chroot /mnt
apt-get remove grub-efi-amd64-signed
grub-install --removable
update-grub
for i in /sys /proc /dev/pts /dev; do sudo umount /mnt$i; done
sudo umount /mnt/boot/efi
sudo umount /mnt
Puis, pour vérifier :
sudo efibootmgr -v
Hors ligne
#11 Le 17/12/2014, à 14:32
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Oui parce qu'entre temps j'avais essayé d'appliquer la méthode de malbo.
Bon du coup je refais un boot info ou je refais une installation ?
Pour savoir où on en est...
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#12 Le 17/12/2014, à 14:35
- ikewdu
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Salut,
A ce que je vois, Nième cas de bridage du démarrage sur WBM. Il semble qu'il y ait, chez les constructeurs, une réelle volonté d'empêcher le démarrage des PC sur autre chose que W8.
Tu devrais tout de même désactiver le "fast boot" et le "quiet boot" du bios. Vois aussi dans "advanced" (ou dans "hard disk drive priorities") si "old systems" ou "other systems" ne seraient pas proposés.
Après, ça, tu peux refaire sudo efibootmgr /v pour voir si ça change.
Vois aussi dans "advanced" si la touche F12 peut être activée... si oui, tu verras alors si une entrée Ubuntu est proposée en la sélectionnant au démarrage.
Dernière modification par ikewdu (Le 17/12/2014, à 14:38)
Hors ligne
#13 Le 17/12/2014, à 14:51
- nany
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
[…]
Bon du coup je refais un boot info […] ?
Pour savoir où on en est...
Pas besoin de refaire un Boot-Info, on peux récupérer le dernier :
sudo mount /dev/sda2 /mnt
ls /mnt/var/log/boot-sav/log
Hors ligne
#14 Le 17/12/2014, à 15:17
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Bon j'ai fais ce que tu m'as proposé ikewdu. Ça n' a pas marché.
Tu devrais tout de même désactiver le "fast boot" et le "quiet boot" du bios. Vois aussi dans "advanced" (ou dans "hard disk drive priorities") si "old systems" ou "other systems" ne seraient pas proposés.
j'ai pu désactiver fast et quiet boot mais n'ai pas trouvé other systems
J'ai ensuite fais ce que tu m'as recommandé nany. Mais j'ai refait un bootinfo
Pour savoir où l'on en est. boot info
Dernière modification par souen (Le 17/12/2014, à 15:29)
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#15 Le 17/12/2014, à 15:32
- nany
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Bon j'ai fais ce que tu m'as proposé ikewdu. Ça n' a pas marché.
J'ai ensuite fais ce que tu m'as recommandé nany.
C’est à dire ? La méthode maxire ?
Mais j'ai refait un bootinfo
Pour savoir où l'on en est. boot info
efibootmgr -v BootCurrent: 0006 Timeout: 2 seconds BootOrder: 0005,0006,0003 Boot0003 Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...e................ Boot0005* UEFI: WDC WD10EZEX-22RKKA0 ACPI(a0341d0,0)PCI(11,0)03120a000000ffff0000HD(1,800,100000,efe613f1-f199-495c-9951-150cba418314)..BO Boot0006 UEFI: TDK LoR TF10 PMAP ACPI(a0341d0,0)PCI(10,0)USB(4,0)HD(1,1f80,e6a080,0000fa8f)..BO
WBM est toujours là et toujours pas d’entrée Ubuntu.
Hors ligne
#16 Le 17/12/2014, à 16:20
- ikewdu
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Re,
J'ai vu... boot-repair crée l'entrée, et elle saute au redémarrage qui suit. Je me demande si on ne pourrait pas "tromper le bios" en renommant shimx64.efi en bootmgfw.efi. Perso, je ne vois pas d'autre solution, sinon celle de réinstaller W8.
Hors ligne
#17 Le 17/12/2014, à 16:47
- nany
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Re,
J'ai vu... boot-repair crée l'entrée, et elle saute au redémarrage qui suit.
Ça devient pire que les bridages de Tosh. et HP !
Je me demande si on ne pourrait pas "tromper le bios" en renommant shimx64.efi en bootmgfw.efi.
À tenter en effet mais j’ai des doutes.
Perso, je ne vois pas d'autre solution, sinon celle de réinstaller W8.
J’ai bien peur que ce ne soit la seule solution quand je vois « Vendor » et « B.C.D.O.B.J.E.C.T.=. ».
Hors ligne
#18 Le 17/12/2014, à 16:49
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
ah ouais? sérieux??? mais comment je fais pour faire ça?
Je me demande si on ne pourrait pas "tromper le bios" en renommant shimx64.efi en bootmgfw.efi.
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#19 Le 17/12/2014, à 17:30
- nany
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Comme ça :
sudo umount /mnt
sudo mount /dev/sda1 /mnt
mkdir -p /mnt/EFI/Microsoft/Boot/
cp /mnt/EFI/ubuntu/shimx64.efi /mnt/EFI/Microsoft/Boot/bootmgfw.efi
?
Hors ligne
#20 Le 17/12/2014, à 17:40
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
j'ai fait les commandes ci-dessus en livecd, j'ai redémarré et j'ai toujours
le même message reboot and select proper boot device
or insert boot media in selected boot device and press a key
si je change le disque dur de l'ordi, j'aurais le même problème?
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne
#21 Le 17/12/2014, à 17:44
- malbo
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Essaie Super Grub2 Disk (SG2D) : je donne dans ce post des indications pour faire une LiveUSB SG2D ou bien un LiveCD SG2D. Dans ton cas, puisque l'ordi est équipé d'un lecteur optique, je te recommande plutôt de faire un LiveCD.
Dernière modification par malbo (Le 17/12/2014, à 17:44)
Hors ligne
#22 Le 17/12/2014, à 17:52
- nany
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Ah ben tiens, j’étais justement en train de rechercher le post pour la procédure SG2D.
Merci malbo d’être intervenu pour l’indiquer.
Hors ligne
#23 Le 17/12/2014, à 18:03
- malbo
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
@nany : quand je suis à bout de souffle, je sors mon joker. Le pb, c'est que je suis très vite à bout de souffle...
Hors ligne
#24 Le 17/12/2014, à 18:09
- nany
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
Oui mais là, de toute façon, je ne vois guère d’autre méthode. Si ce n’est justement de s’essouffler à chercher le bon chemin pour, finalement, prendre celui de SG2D.
Dernière modification par nany (Le 17/12/2014, à 18:10)
Hors ligne
#25 Le 17/12/2014, à 18:33
- souen
Re : (résolu) installation d'ubuntu sur un acer aspire xc - 105
voilà j'ai booté sur Super Grub2 en livecd et au démarrage j'ai eu le message:
Secure Boot Violation
Invalid signature detected. Check Secure
Boot policy in setup
Ok
j'ai cliqué sur ok puis la machine a redémarré avec toujours le même message d'erreur
reboot and select proper boot device
or insert boot media in selected boot device and press a key
Dernière modification par souen (Le 17/12/2014, à 18:43)
Nous ne voyons pas le monde comme il est. Nous le voyons comme nous sommes. Anaïs Nin
Hors ligne