[Clos] Centralisation Probleme Webcam+EasyCam

zalilou · Le 09/07/2008, à 08:03

Après mise à jour d'easycam, il détecte ma caméra, installe les pilotes, mais quand je la teste avec cheese j'ai une image avec des rectangles de couleur (quand je le lance, parce que quand je clic sur vidéo, ou après de nouveau sur photo, j'ai plus rien, écran blanc)
et avec Camorama, il ne peux même pas ouvrir la webcam...

Anbreizh · Le 09/07/2008, à 09:01

Tu peux lancer cette commande dans la console, deconnecter ta webcam, la reconnecter, puis relancer xsane ? :

export SANE_DEBUG_SQ930X=255

Et me donner les infos renvoyé par la console quand tu lance xsane.

Dernière modification par Anbreizh (Le 09/07/2008, à 09:11)

zalilou · Le 09/07/2008, à 09:10

il se passe rien...

lisa@lisa-laptop:~$ export SANE_DEBUG_SQ930X=225
lisa@lisa-laptop:~$ xsane
/usr/share/themes/Blubuntu/gtk-2.0/gtkrc:169: Clearlooks configuration option "progressbarstyle" is not supported and will be ignored.
lisa@lisa-laptop:~$

Anbreizh · Le 09/07/2008, à 09:11

Aussi, qu'est que te renvoi la commande :

sudo scanimage -L

Desolé pour l'aide peu efficace, mais ton driver semble en standby depuis 2006, et la doc du mec est assez faible.

zalilou · Le 09/07/2008, à 09:13

Mais non, merci à toi de m'aider

lisa@lisa-laptop:~$ sudo scanimage -L
[sudo] password for lisa: 

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

Anbreizh · Le 09/07/2008, à 09:13

Et dans le dmesg, rien non plus apres la commande export ?

Anbreizh · Le 09/07/2008, à 09:14

Pas cool le resultat de ta commande ....
Je vais regarder si je trouve des infos.

zalilou · Le 09/07/2008, à 09:17

lisa@lisa-laptop:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001f7d3800 (usable)
[    0.000000]  BIOS-e820: 000000001f7d3800 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 503MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 128979) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   128979
[    0.000000]   HighMem    128979 ->   128979
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   128979
[    0.000000] On node 0 totalpages: 128979
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 975 pages used for memmap
[    0.000000]   Normal zone: 123908 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00FC9B0 checksum 0
[    0.000000] ACPI: RSDP 000FC9B0, 0014 (r0 DELL  )
[    0.000000] ACPI: RSDT 1F7D4425, 0038 (r1 DELL    CPi R   27D5031F ASL        61)
[    0.000000] ACPI: FACP 1F7D4C00, 0074 (r1 DELL    CPi R   27D5031F ASL        61)
[    0.000000] ACPI: DSDT 1F7D5800, 2D96 (r1 INT430 SYSFexxx     1001 MSFT  100000E)
[    0.000000] ACPI: FACS 1F7E4000, 0040
[    0.000000] ACPI: APIC 1F7D5400, 0068 (r1 DELL    CPi R   27D5031F ASL        47)
[    0.000000] ACPI: MCFG 1F7D53C0, 003E (r16 DELL    CPi R   27D5031F ASL        61)
[    0.000000] ACPI: SSDT 1F7D4658, 01D8 (r1  PmRef  Cpu0Cst     3001 INTL 20030522)
[    0.000000] ACPI: SSDT 1F7D445D, 01FB (r1  PmRef    CpuPm     3000 INTL 20030522)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:13 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127972
[    0.000000] Kernel command line: root=UUID=57bff130-cc31-413e-ba2c-c9256e897f60 ro quiet splash vga=791
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 1296.787 MHz processor.
[   10.455316] Console: colour dummy device 80x25
[   10.455323] console [tty0] enabled
[   10.455547] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   10.455838] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   10.470240] Memory: 498820k/515916k available (2177k kernel code, 16460k reserved, 1006k data, 368k init, 0k highmem)
[   10.470251] virtual kernel memory layout:
[   10.470252]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   10.470254]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   10.470256]     vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
[   10.470257]     lowmem  : 0xc0000000 - 0xdf7d3000   ( 503 MB)
[   10.470259]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   10.470261]       .data : 0xc0320434 - 0xc041bdc4   (1006 kB)
[   10.470262]       .text : 0xc0100000 - 0xc0320434   (2177 kB)
[   10.470267] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   10.470313] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   10.550278] Calibrating delay using timer specific routine.. 2596.69 BogoMIPS (lpj=5193382)
[   10.550311] Security Framework initialized
[   10.550321] SELinux:  Disabled at boot.
[   10.550339] AppArmor: AppArmor initialized
[   10.550345] Failure registering capabilities with primary security module.
[   10.550355] Mount-cache hash table entries: 512
[   10.550512] Initializing cgroup subsys ns
[   10.550518] Initializing cgroup subsys cpuacct
[   10.550531] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000 00000000
[   10.550546] CPU: L1 I cache: 32K, L1 D cache: 32K
[   10.550549] CPU: L2 cache: 1024K
[   10.550553] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000000 00000000 00000000 00000000
[   10.550564] Compat vDSO mapped to ffffe000.
[   10.550579] Checking 'hlt' instruction... OK.
[   10.566753] SMP alternatives: switching to UP code
[   10.569157] Freeing SMP alternatives: 11k freed
[   10.569294] Early unpacking initramfs... done
[   11.067576] ACPI: Core revision 20070126
[   11.067647] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   11.071656] CPU0: Intel(R) Celeron(R) M processor         1.30GHz stepping 08
[   11.071687] Total of 1 processors activated (2596.69 BogoMIPS).
[   11.071860] ENABLING IO-APIC IRQs
[   11.072060] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   11.217816] Brought up 1 CPUs
[   11.217849] CPU0 attaching sched-domain:
[   11.217852]  domain 0: span 01
[   11.217854]   groups: 01
[   11.218054] net_namespace: 64 bytes
[   11.218067] Booting paravirtualized kernel on bare hardware
[   11.218649] Time:  7:30:48  Date: 07/09/08
[   11.218680] NET: Registered protocol family 16
[   11.218922] EISA bus registered
[   11.218951] ACPI: bus type pci registered
[   11.256652] PCI: PCI BIOS revision 2.10 entry at 0xfbaae, last bus=3
[   11.256655] PCI: Using configuration type 1
[   11.256673] Setting up standard PCI resources
[   11.258934] ACPI: EC: Look up EC in DSDT
[   11.263577] ACPI: Interpreter enabled
[   11.263582] ACPI: (supports S0 S3 S4 S5)
[   11.263598] ACPI: Using IOAPIC for interrupt routing
[   11.269114] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   11.269943] Force enabled HPET at base address 0xfed00000
[   11.269954] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[   11.269960] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[   11.270381] PCI: Transparent bridge - 0000:00:1e.0
[   11.270465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   11.271031] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[   11.282115] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[   11.282241] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[   11.282363] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[   11.282483] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[   11.282605] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
[   11.282713] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   11.282822] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   11.282976] Linux Plug and Play Support v0.97 (c) Adam Belay
[   11.283015] pnp: PnP ACPI init
[   11.283024] ACPI: bus type pnp registered
[   11.298718] pnpacpi: exceeded the max number of mem resources: 12
[   11.313146] pnpacpi: exceeded the max number of IO resources: 40 
[   11.313232] pnp: PnP ACPI: found 12 devices
[   11.313235] ACPI: ACPI bus type pnp unregistered
[   11.313239] PnPBIOS: Disabled by ACPI PNP
[   11.313506] PCI: Using ACPI for IRQ routing
[   11.313509] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   11.341673] NET: Registered protocol family 8
[   11.341676] NET: Registered protocol family 20
[   11.341883] hpet clockevent registered
[   11.341890] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   11.341896] hpet0: 3 64-bit timers, 14318180 Hz
[   11.342944] AppArmor: AppArmor Filesystem Enabled
[   11.345662] Time: tsc clocksource has been installed.
[   11.353701] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[   11.353706] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[   11.353710] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[   11.353713] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[   11.353717] system 00:00: iomem range 0x100000-0x1f7d37ff could not be reserved
[   11.353722] system 00:00: iomem range 0x1f7d3800-0x1f7fffff could not be reserved
[   11.353726] system 00:00: iomem range 0x1f800000-0x1fffffff could not be reserved
[   11.353730] system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved
[   11.353734] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
[   11.353738] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[   11.353742] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
[   11.353746] system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
[   11.353755] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[   11.353759] system 00:02: ioport range 0x1000-0x1005 has been reserved
[   11.353763] system 00:02: ioport range 0x1008-0x100f has been reserved
[   11.353770] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[   11.353774] system 00:03: ioport range 0x1006-0x1007 has been reserved
[   11.353778] system 00:03: ioport range 0x100a-0x1059 could not be reserved
[   11.353782] system 00:03: ioport range 0x1060-0x107f has been reserved
[   11.353786] system 00:03: ioport range 0x1080-0x10bf has been reserved
[   11.353789] system 00:03: ioport range 0x10c0-0x10df has been reserved
[   11.353793] system 00:03: ioport range 0x10e0-0x10ff has been reserved
[   11.353803] system 00:08: ioport range 0x900-0x90f has been reserved
[   11.353806] system 00:08: ioport range 0x910-0x91f has been reserved
[   11.353810] system 00:08: ioport range 0x920-0x92f has been reserved
[   11.353814] system 00:08: ioport range 0x930-0x93f has been reserved
[   11.353817] system 00:08: ioport range 0x940-0x97f has been reserved
[   11.353825] system 00:0b: ioport range 0x7b0-0x7bb has been reserved
[   11.353829] system 00:0b: ioport range 0x7c0-0x7df has been reserved
[   11.353833] system 00:0b: ioport range 0xbb0-0xbbb has been reserved
[   11.353836] system 00:0b: ioport range 0xbc0-0xbdf has been reserved
[   11.353840] system 00:0b: ioport range 0xfb0-0xfbb has been reserved
[   11.353844] system 00:0b: ioport range 0xfc0-0xfdf has been reserved
[   11.353848] system 00:0b: ioport range 0x13b0-0x13bb has been reserved
[   11.353851] system 00:0b: ioport range 0x13c0-0x13df has been reserved
[   11.353855] system 00:0b: ioport range 0x17b0-0x17bb has been reserved
[   11.353859] system 00:0b: ioport range 0x17c0-0x17df has been reserved
[   11.353863] system 00:0b: ioport range 0x1bb0-0x1bbb has been reserved
[   11.353867] system 00:0b: ioport range 0x1bc0-0x1bdf has been reserved
[   11.353871] system 00:0b: ioport range 0x1fb0-0x1fbb has been reserved
[   11.353874] system 00:0b: ioport range 0x1fc0-0x1fdf has been reserved
[   11.353878] system 00:0b: ioport range 0x23b0-0x23bb has been reserved
[   11.353882] system 00:0b: ioport range 0x23c0-0x23df has been reserved
[   11.353885] system 00:0b: ioport range 0x27b0-0x27bb has been reserved
[   11.353889] system 00:0b: ioport range 0x27c0-0x27df has been reserved
[   11.353893] system 00:0b: ioport range 0x2bb0-0x2bbb has been reserved
[   11.353897] system 00:0b: ioport range 0x2bc0-0x2bdf has been reserved
[   11.353900] system 00:0b: ioport range 0x2fb0-0x2fbb has been reserved
[   11.353904] system 00:0b: ioport range 0x2fc0-0x2fdf has been reserved
[   11.353908] system 00:0b: ioport range 0x33b0-0x33bb has been reserved
[   11.353912] system 00:0b: ioport range 0x33c0-0x33df has been reserved
[   11.353920] system 00:0b: ioport range 0x37b0-0x37bb has been reserved
[   11.353923] system 00:0b: ioport range 0x37c0-0x37df has been reserved
[   11.353927] system 00:0b: ioport range 0x3bb0-0x3bbb has been reserved
[   11.353931] system 00:0b: ioport range 0x3bc0-0x3bdf has been reserved
[   11.353935] system 00:0b: ioport range 0x3fb0-0x3fbb has been reserved
[   11.353938] system 00:0b: ioport range 0x3fc0-0x3fdf has been reserved
[   11.353942] system 00:0b: ioport range 0x43b0-0x43bb has been reserved
[   11.353946] system 00:0b: ioport range 0x43c0-0x43df has been reserved
[   11.353950] system 00:0b: ioport range 0x47b0-0x47bb has been reserved
[   11.353954] system 00:0b: ioport range 0x47c0-0x47df has been reserved
[   11.353958] system 00:0b: ioport range 0x4bb0-0x4bbb has been reserved
[   11.353962] system 00:0b: ioport range 0x4bc0-0x4bdf has been reserved
[   11.353965] system 00:0b: ioport range 0x4fb0-0x4fbb has been reserved
[   11.353969] system 00:0b: ioport range 0x4fc0-0x4fdf has been reserved
[   11.353973] system 00:0b: ioport range 0x53b0-0x53bb has been reserved
[   11.353977] system 00:0b: ioport range 0x53c0-0x53df has been reserved
[   11.384472] PCI: Bus 3, cardbus bridge: 0000:02:01.0
[   11.384475]   IO window: 0000d000-0000d0ff
[   11.384481]   IO window: 0000d400-0000d4ff
[   11.384488]   PREFETCH window: 30000000-33ffffff
[   11.384494]   MEM window: 34000000-37ffffff
[   11.384499] PCI: Bridge: 0000:00:1e.0
[   11.384503]   IO window: d000-dfff
[   11.384510]   MEM window: dfd00000-dfdfffff
[   11.384515]   PREFETCH window: disabled.
[   11.384535] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   11.384556] PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
[   11.384565] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   11.384585] NET: Registered protocol family 2
[   11.421680] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   11.421927] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   11.422049] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   11.422172] TCP: Hash tables configured (established 16384 bind 16384)
[   11.422175] TCP reno registered
[   11.433743] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[   11.907558]  it is
[   12.416871] Freeing initrd memory: 7885k freed
[   12.417618] audit: initializing netlink socket (disabled)
[   12.417639] audit(1215588649.844:1): initialized
[   12.420249] VFS: Disk quotas dquot_6.5.1
[   12.420348] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   12.420532] io scheduler noop registered
[   12.420536] io scheduler anticipatory registered
[   12.420538] io scheduler deadline registered
[   12.420553] io scheduler cfq registered (default)
[   12.420568] Boot video device is 0000:00:02.0
[   12.420669] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[   12.421015] isapnp: Scanning for PnP cards...
[   12.775095] isapnp: No Plug & Play device found
[   12.810889] Real Time Clock Driver v1.12ac
[   12.811037] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   12.811759] ACPI: PCI Interrupt 0000:00:1e.3[b] -> GSI 17 (level, low) -> IRQ 17
[   12.811771] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[   12.812598] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   12.812691] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   12.812814] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   12.817597] serio: i8042 KBD port at 0x60,0x64 irq 1
[   12.817603] serio: i8042 AUX port at 0x60,0x64 irq 12
[   12.828439] mice: PS/2 mouse device common for all mice
[   12.828583] EISA: Probing bus 0 at eisa.0
[   12.828592] Cannot allocate resource for EISA slot 1
[   12.828630] EISA: Detected 0 cards.
[   12.828634] cpuidle: using governor ladder
[   12.828636] cpuidle: using governor menu
[   12.828758] NET: Registered protocol family 1
[   12.828792] Using IPI No-Shortcut mode
[   12.828832] registered taskstats version 1
[   12.828973]   Magic number: 0:898:520
[   12.829120] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   12.829123] EDD information not available.
[   12.829346] Freeing unused kernel memory: 368k freed
[   12.832594] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   12.944009] vesafb: framebuffer at 0xc0000000, mapped to 0xe0080000, using 3072k, total 7872k
[   12.944015] vesafb: mode is 1024x768x16, linelength=2048, pages=4
[   12.944018] vesafb: scrolling: redraw
[   12.944021] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[   12.944167] Console: switching to colour frame buffer device 128x48
[   12.964343] fb0: VESA VGA frame buffer device
[   14.139454] fuse init (API version 7.9)
[   14.161767] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   14.161776] ACPI: Processor [CPU0] (supports 8 throttling states)
[   14.161795] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   14.167312] ACPI: Thermal Zone [THM] (60 C)
[   14.978563] usbcore: registered new interface driver usbfs
[   14.978595] usbcore: registered new interface driver hub
[   14.990535] usbcore: registered new device driver usb
[   15.010197] USB Universal Host Controller Interface driver v3.0
[   15.010280] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[   15.010296] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   15.010302] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   15.010724] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   15.010763] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[   15.010939] usb usb1: configuration #1 chosen from 1 choice
[   15.010970] hub 1-0:1.0: USB hub found
[   15.010977] hub 1-0:1.0: 2 ports detected
[   15.114532] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17
[   15.114552] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   15.114558] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   15.114590] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   15.114627] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
[   15.114769] usb usb2: configuration #1 chosen from 1 choice
[   15.114800] hub 2-0:1.0: USB hub found
[   15.114807] hub 2-0:1.0: 2 ports detected
[   15.118391] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[   15.118394] e100: Copyright(c) 1999-2006 Intel Corporation
[   15.167981] SCSI subsystem initialized
[   15.210790] libata version 3.00 loaded.
[   15.218417] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   15.218437] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   15.218443] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   15.218474] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   15.218512] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
[   15.218650] usb usb3: configuration #1 chosen from 1 choice
[   15.218679] hub 3-0:1.0: USB hub found
[   15.218686] hub 3-0:1.0: 2 ports detected
[   15.322333] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[   15.322351] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   15.322357] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   15.322389] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   15.322424] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
[   15.322567] usb usb4: configuration #1 chosen from 1 choice
[   15.322597] hub 4-0:1.0: USB hub found
[   15.322604] hub 4-0:1.0: 2 ports detected
[   15.354180] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   15.426401] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
[   15.426419] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   15.426424] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   15.426456] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   15.430389] ehci_hcd 0000:00:1d.7: debug port 1
[   15.430397] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   15.430406] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
[   15.494040] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   15.494193] usb usb5: configuration #1 chosen from 1 choice
[   15.494227] hub 5-0:1.0: USB hub found
[   15.494236] hub 5-0:1.0: 8 ports detected
[   15.598189] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[   15.617959] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[   15.617971] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[   15.617980] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[   15.617988] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[   15.657986] ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
[   15.658188] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[   15.685897] e100: eth0: e100_probe: addr 0xdfdfd000, irq 20, MAC addr 00:11:43:52:d1:9b
[   15.690591] ata_piix 0000:00:1f.1: version 2.12
[   15.690612] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[   15.690657] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   15.691766] scsi0 : ata_piix
[   15.692460] scsi1 : ata_piix
[   15.693150] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[   15.693154] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[   15.889702] usb 1-1: device not accepting address 2, error -71
[   16.018220] ata1.00: ATA-6: TOSHIBA MK4026GAX, PA102D, max UDMA/100
[   16.018226] ata1.00: 78140160 sectors, multi 8: LBA 
[   16.018262] ata1.01: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4244N, B101, max UDMA/33
[   16.026143] ata1.00: configured for UDMA/100
[   16.197888] ata1.01: configured for UDMA/33
[   16.197943] ata2: port disabled. ignoring.
[   16.198107] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK4026GA PA10 PQ: 0 ANSI: 5
[   16.201136] scsi 0:0:1:0: CD-ROM            HL-DT-ST CDRW/DVD GCC4244 B101 PQ: 0 ANSI: 5
[   16.217521] Driver 'sd' needs updating - please use bus_type methods
[   16.217630] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[   16.217647] sd 0:0:0:0: [sda] Write Protect is off
[   16.217650] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   16.217672] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   16.217732] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[   16.217744] sd 0:0:0:0: [sda] Write Protect is off
[   16.217747] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   16.217767] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   16.217772]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   16.272482]  sda1 sda2 < sda5 >
[   16.299850] sd 0:0:0:0: [sda] Attached SCSI disk
[   16.308070] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   16.308096] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   16.322866] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[   16.322872] Uniform CD-ROM driver Revision: 3.20
[   16.322942] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   16.337297] Clocksource tsc unstable (delta = -1188967534 ns)
[   16.341285] Time: hpet clocksource has been installed.
[   16.433306] usb 5-1: new high speed USB device using ehci_hcd and address 2
[   16.574784] usb 5-1: configuration #1 chosen from 1 choice
[   16.585752] Attempting manual resume
[   16.585757] swsusp: Resume From Partition 8:5
[   16.585760] PM: Checking swsusp image.
[   16.586257] PM: Resume from disk failed.
[   16.614354] EXT3-fs: INFO: recovery required on readonly filesystem.
[   16.614360] EXT3-fs: write access will be enabled during recovery.
[   16.991822] usb 5-3: new high speed USB device using ehci_hcd and address 4
[   17.124233] usb 5-3: configuration #1 chosen from 1 choice
[   17.124374] hub 5-3:1.0: USB hub found
[   17.124470] hub 5-3:1.0: 4 ports detected
[   17.394666] kjournald starting.  Commit interval 5 seconds
[   17.394687] EXT3-fs: sda1: orphan cleanup on readonly fs
[   17.394695] ext3_orphan_cleanup: deleting unreferenced inode 581689
[   17.394727] EXT3-fs: sda1: 1 orphan inode deleted
[   17.394730] EXT3-fs: recovery complete.
[   17.435537] EXT3-fs: mounted filesystem with ordered data mode.
[   17.467399] usb 1-2: new low speed USB device using uhci_hcd and address 4
[   17.641806] usb 1-2: configuration #1 chosen from 1 choice
[   17.859116] usb 5-3.2: new high speed USB device using ehci_hcd and address 5
[   17.969621] usb 5-3.2: configuration #1 chosen from 1 choice
[   29.638339] Linux agpgart interface v0.102
[   29.788399] agpgart: Detected an Intel 915GM Chipset.
[   29.788749] agpgart: Detected 7932K stolen memory.
[   29.924233] agpgart: AGP aperture is 256M @ 0xc0000000
[   30.265176] intel_rng: FWH not detected
[   30.527629] iTCO_vendor_support: vendor-support=0
[   30.564825] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   30.564972] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[   30.565031] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   30.856159] ACPI: AC Adapter [AC] (on-line)
[   31.519771] ACPI: Battery Slot [BAT0] (battery present)
[   31.519853] input: Lid Switch as /devices/virtual/input/input2
[   31.520436] ACPI: Lid Switch [LID]
[   31.520496] input: Power Button (CM) as /devices/virtual/input/input3
[   31.534717] ACPI: Power Button (CM) [PBTN]
[   31.534830] input: Sleep Button (CM) as /devices/virtual/input/input4
[   31.550671] ACPI: Sleep Button (CM) [SBTN]
[   31.882472] Yenta: CardBus bridge found at 0000:02:01.0 [1028:01a4]
[   31.882501] Yenta: Using CSCINT to route CSC interrupts to PCI
[   31.882504] Yenta: Routing CardBus interrupts to PCI
[   31.882511] Yenta TI: socket 0000:02:01.0, mfunc 0x00001002, devctl 0x64
[   32.006464] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   32.114974] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   32.114981] Socket status: 30000007
[   32.114984] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[   32.114992] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[   32.114996] cs: IO port probe 0xd000-0xdfff: clean.
[   32.115477] pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff
[   32.326439] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x8fa0b1, caps: 0xa04713/0x200000
[   32.364533] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[   32.906293] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input7
[   32.919601] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   32.919797] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input8
[   32.933428] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[   33.704833] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[   35.055595] b43-phy0: Broadcom 4318 WLAN found
[   35.099485] b43-phy0 debug: Found PHY: Analog 3, Type 2, Revision 7
[   35.099510] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
[   35.115590] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   35.143949] phy0: Selected rate control algorithm 'simple'
[   35.467377] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16
[   35.467414] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[   35.520355] usbcore: registered new interface driver hiddev
[   35.537140] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input9
[   35.563174] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2
[   35.563202] usbcore: registered new interface driver usbhid
[   35.563207] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   35.570378] usbcore: registered new interface driver libusual
[   35.603462] Initializing USB Mass Storage driver...
[   35.614278] scsi2 : SCSI emulation for USB Mass Storage devices
[   35.624520] usbcore: registered new interface driver usb-storage
[   35.624528] USB Mass Storage support registered.
[   35.624674] usb-storage: device found at 5
[   35.624677] usb-storage: waiting for device to settle before scanning
[   35.648714] NET: Registered protocol family 17
[   36.294454] intel8x0_measure_ac97_clock: measured 55456 usecs
[   36.294459] intel8x0: clocking to 48000
[   37.214400] cs: IO port probe 0x100-0x3af: clean.
[   37.216137] cs: IO port probe 0x3e0-0x4ff: clean.
[   37.216876] cs: IO port probe 0x820-0x8ff: clean.
[   37.217493] cs: IO port probe 0xc00-0xcf7: clean.
[   37.218318] cs: IO port probe 0xa00-0xaff: clean.
[   37.680007] lp: driver loaded but no devices found
[   37.931804] Adding 1485972k swap on /dev/sda5.  Priority:-1 extents:1 across:1485972k
[   38.484004] EXT3 FS on sda1, internal journal
[   38.819417] NET: Registered protocol family 10
[   38.819703] lo: Disabled Privacy Extensions
[   39.722574] ip_tables: (C) 2000-2006 Netfilter Core Team
[   40.206067] No dock devices found.
[   40.628419] usb-storage: device scan complete
[   40.654022] scsi 2:0:0:0: Direct-Access     SAMSUNG  HM160JC          AP10 PQ: 0 ANSI: 0
[   40.666853] sd 2:0:0:0: [sdb] 312581807 512-byte hardware sectors (160042 MB)
[   40.667722] sd 2:0:0:0: [sdb] Write Protect is off
[   40.667726] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[   40.667730] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   40.668968] sd 2:0:0:0: [sdb] 312581807 512-byte hardware sectors (160042 MB)
[   40.669843] sd 2:0:0:0: [sdb] Write Protect is off
[   40.669847] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[   40.669849] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   40.669853]  sdb: sdb1
[   41.280128] sd 2:0:0:0: [sdb] Attached SCSI disk
[   41.280186] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   42.094737] apm: BIOS not found.
[   42.308917] ppdev: user-space parallel port driver
[   42.840405] audit(1215588682.171:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5027 profile="/usr/sbin/cupsd" namespace="default"
[   44.837434] input: b43-phy0 as /devices/virtual/input/input10
[   45.057922] Bluetooth: Core ver 2.11
[   45.058361] NET: Registered protocol family 31
[   45.058365] Bluetooth: HCI device and connection manager initialized
[   45.058371] Bluetooth: HCI socket layer initialized
[   45.086510] Bluetooth: L2CAP ver 2.9
[   45.086516] Bluetooth: L2CAP socket layer initialized
[   45.114453] Bluetooth: RFCOMM socket layer initialized
[   45.114473] Bluetooth: RFCOMM TTY layer initialized
[   45.114475] Bluetooth: RFCOMM ver 1.8
[   45.195488] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
[   45.382221] usplash[1204]: segfault at b76e82ae eip b7f4ff19 esp bfab1180 error 6
[   46.087556] b43-phy0 debug: Chip initialized
[   46.088033] b43-phy0 debug: 32-bit DMA initialized
[   46.107750] Registered led device: b43-phy0:tx
[   46.107995] Registered led device: b43-phy0:rx
[   46.108154] Registered led device: b43-phy0:radio
[   46.108193] b43-phy0 debug: Wireless interface started
[   46.153543] b43-phy0: Radio hardware status changed to DISABLED
[   46.154796] b43-phy0 debug: Adding Interface type 2
[   46.155328] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   48.895020] eth0: no IPv6 routers present
[   50.329450] [drm] Initialized drm 1.1.0 20060810
[   50.333406] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   50.333417] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   50.333508] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 2239.685368] usb 5-1: USB disconnect, address 2
[ 2248.259520] usb 5-1: new high speed USB device using ehci_hcd and address 6
[ 2248.400985] usb 5-1: configuration #1 chosen from 1 choice

Je vais aller travailler, alors si t'as d'autres questions, j'essaierai d'y répondre ce midi, sinon ce soir...

Encore merci pour ton aide

A+

Lisa

Anbreizh · Le 09/07/2008, à 09:34

Alors j'ai trouver un drivers, sur la page du developpeur, qui semble ok, mais il n'est plus compatible avec la branche du kernel actuelle d'ubuntu. Je vais regarder si je peux faire quelque chose.

Anbreizh · Le 09/07/2008, à 09:59

Apres recherche, le driver n'est bien pas compatible avec la version actuelle du kernel. Et vu mes connaisances en C, je risque pas de mettre moi meme le drivers à jour. Si quelqu'un s'y connait un peu en C, je pense que le boulot doit pas etre immense.
Désole zalilou, mais pour le moment, c'est mort pour ta webcam ....

Dernière modification par Anbreizh (Le 09/07/2008, à 10:34)

sirius10 · Le 09/07/2008, à 10:47

Anbreizh a écrit :

Je viens de mettre à jour Easycam vers la version 1.99.92. Elle supporte normalement ta webcam. Tient moi au courant sirius1O

Merci beaucoup :):) , je teste ce soir et je tiens au courant

zalilou · Le 09/07/2008, à 11:58

Anbreizh a écrit :

Apres recherche, le driver n'est bien pas compatible avec la version actuelle du kernel. Et vu mes connaisances en C, je risque pas de mettre moi meme le drivers à jour. Si quelqu'un s'y connait un peu en C, je pense que le boulot doit pas etre immense.
Désole zalilou, mais pour le moment, c'est mort pour ta webcam ....

Sniff...
tant pis, je vais attendre si quelqu'un veut bien faire ce que tu dis...

Merci

LLStarks · Le 09/07/2008, à 20:02

Please support 093a:2620 Pixart Imaging, Inc.

Thanks.

Anbreizh · Le 09/07/2008, à 21:46

Hi,
I’m sorry, but for the moment, your webcam can not run on Linux, because nobody did a driver (sorry ) for this webcam
Best Regards

Dernière modification par Anbreizh (Le 09/07/2008, à 23:00)

LLStarks · Le 09/07/2008, à 22:41

What is a 'pilot'?

Strash · Le 09/07/2008, à 22:47

LLStarks a écrit :

What is a 'pilot'?

"pilot"(fr) = "driver"(en)

LLStarks · Le 09/07/2008, à 22:50

Would it be difficult to trick gspca into working with it? I know which PCB bridge the webcam uses.

PAC7303

Anbreizh · Le 09/07/2008, à 23:02

I don't know, sorry ... But you can ask the dev of gspca : http://mxhaard.free.fr/spca5xx.html
Best Regards

sirius10 · Le 10/07/2008, à 23:11

Anbreizh a écrit :

Je viens de mettre à jour Easycam vers la version 1.99.92. Elle supporte normalement ta webcam. Tient moi au courant sirius1O

Merci:):);)

Je l'ai teste avec amsn et pas de souci par contre je n'ai rien avec cheese..exist il une manip???

Merci encore

Anbreizh · Le 12/07/2008, à 07:03

Tu a un message d'erreur si tu lance 'cheese' dans la console ?

sirius10 · Le 12/07/2008, à 13:01

Salut

Avec la console, cheese se lance met je n'ai pas de vidéo (dans la fenetre de cheese je vois les doigts de pieds du logo gnome qui grandissent et se raptississent et c'est tout), mais pas de message d'erreur..

Avec camorama, j'ai un message d'ereur qui m'enpece d'ouvrir son interface, le message est le suivant

could not connect to video device (/dev/videoO)
Please check connection

Voila tout

sirius10 · Le 12/07/2008, à 13:03

Edit

Desolé j 'i bug d'affichage et je ne peux pas editer le message précédent..
En fermant cheese, j'obtiens ce message dans la console

espoir@stef:~$ cheese

(cheese:6685): GStreamer-CRITICAL **: gst_element_set_state: assertion `GST_IS_ELEMENT (element)' failed

(cheese:6685): GStreamer-CRITICAL **: gst_object_unref: assertion `object != NULL' failed

(cheese:6685): GStreamer-CRITICAL **: gst_object_unref: assertion `object != NULL' failed
espoir@stef:~$

Ca pourra peut etre d'aiguiller

A+

Anbreizh · Le 12/07/2008, à 13:51

Salut !

Tu as un autre périphérique video comme une carte télé par exemple ? Autrement lance la commande 'gstreamer-properties' et test ta webcam avec v4l et v4l2.

Kranagard · Le 12/07/2008, à 22:19

j'ai installé easycam2 selon la methode indiqué mais lors de l'execution de lauchcam2 j'ai ce message:

Traceback (most recent call last):
File "/usr/share/EasyCam2/easycam.py", line 26, in <module>
import gnome.ui
ImportError: No module named gnome.ui

je sais pas pourquoi mais un sentiment né en moi me disant que j'ai chopé la version gnome alors que j'ai kde3.
ça vient de la ou il peut y avoir une autre raison?
et si ça vient de la, la version kubuntu existe aussi?
quoi qu'il en soit merci a toi pour ce boulot, c'est vraiment niquel comme log

install toute fraiche de kde 7.10 (a cause de l'install d'oracle qui voulait pas)

Anbreizh · Le 12/07/2008, à 22:26

Il n'y a qu'une version gnome pour le moment, mais les choses vont bientot changer .....
Si tu veux pouvoir utiliser Easycam tout de suite, installe le paquet python-gnome2, et normalement c'est ok

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#2126 Le 09/07/2008, à 08:03

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2127 Le 09/07/2008, à 09:01

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2128 Le 09/07/2008, à 09:10

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2129 Le 09/07/2008, à 09:11

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2130 Le 09/07/2008, à 09:13

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2131 Le 09/07/2008, à 09:13

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2132 Le 09/07/2008, à 09:14

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2133 Le 09/07/2008, à 09:17

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2134 Le 09/07/2008, à 09:34

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2135 Le 09/07/2008, à 09:59

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2136 Le 09/07/2008, à 10:47

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2137 Le 09/07/2008, à 11:58

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2138 Le 09/07/2008, à 20:02

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2139 Le 09/07/2008, à 21:46

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2140 Le 09/07/2008, à 22:41

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2141 Le 09/07/2008, à 22:47

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2142 Le 09/07/2008, à 22:50

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2143 Le 09/07/2008, à 23:02

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2144 Le 10/07/2008, à 23:11

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2145 Le 12/07/2008, à 07:03

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2146 Le 12/07/2008, à 13:01

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2147 Le 12/07/2008, à 13:03

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2148 Le 12/07/2008, à 13:51

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2149 Le 12/07/2008, à 22:19

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2150 Le 12/07/2008, à 22:26

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Pied de page des forums