#1 Le 26/04/2015, à 20:43
- olivier01
ouverture session impossible suite mise à jour ubuntu15.04
Bonsoir,Je viens d'installer la dernière mise à jour d'ubuntu 15.04.
Mon fond d'écran s'affiche normalement.
Lorsque je tape mon mot de passe de session, la session ne souvre pas et revient sur la demande de mot de passe avec mon fond d'écran.
Je vois brièvement un écran noir avec quelques messages que je n'ai pas le temps de lire
Impossible également d'ouvrir la session invité....
Merci,
Hors ligne
#2 Le 27/04/2015, à 16:48
- malbo
Re : ouverture session impossible suite mise à jour ubuntu15.04
Je te propose de démarrer en session live (Essayer Ubuntu sans l'installer) de Ubuntu 15.04 et de faire un Boot-Info. Tu donneras l'URL de ce Boot-Info dans ta réponse.
Hors ligne
#3 Le 27/04/2015, à 21:34
- olivier01
Re : ouverture session impossible suite mise à jour ubuntu15.04
Bonsoir,
voici l'url: http://paste.ubuntu.com/10915774/
Merci pour votre aide
Hors ligne
#4 Le 28/04/2015, à 05:02
- malbo
Re : ouverture session impossible suite mise à jour ubuntu15.04
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 15.04
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.03 2014-10-06................................................2....0............A20 gate n
Boot sector info: Syslinux looks at sector 336664 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 480,012,287 480,010,240 83 Linux
/dev/sda2 480,014,334 488,396,799 8,382,466 5 Extended
/dev/sda5 480,014,336 488,396,799 8,382,464 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1.9 GiB, 2062548992 bytes, 4028416 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 128 4,028,415 4,028,288 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 9b6fe66c-c066-47b7-b388-ba70a32bb0d0 ext4
/dev/sda5 e8d79b14-3070-44ba-99f6-9699167221b8 swap
/dev/sdb1 BC67-7FC7 vfat
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Apr 27 20:27 ata-Samsung_SSD_840_EVO_250GB_S1DBNSBF368932Y -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 27 20:27 ata-Samsung_SSD_840_EVO_250GB_S1DBNSBF368932Y-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 27 20:27 ata-Samsung_SSD_840_EVO_250GB_S1DBNSBF368932Y-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 27 20:27 ata-Samsung_SSD_840_EVO_250GB_S1DBNSBF368932Y-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Apr 27 20:16 ata-TSSTcorp_CDDVDW_SH-222AB_R8BZ6GDB366235 -> ../../sr0
lrwxrwxrwx 1 root root 9 Apr 27 20:27 usb-TOSHIBA_TransMemory_0C109570F171AA45-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Apr 27 20:27 usb-TOSHIBA_TransMemory_0C109570F171AA45-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Apr 27 20:27 wwn-0x9967768004698066946x -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 27 20:27 wwn-0x9967768004698066946x-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 27 20:27 wwn-0x9967768004698066946x-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 27 20:27 wwn-0x9967768004698066946x-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
else
search --no-floppy --fs-uuid --set=root 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-9b6fe66c-c066-47b7-b388-ba70a32bb0d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
else
search --no-floppy --fs-uuid --set=root 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
fi
linux /boot/vmlinuz-3.13.0-49-generic root=UUID=9b6fe66c-c066-47b7-b388-ba70a32bb0d0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-49-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-9b6fe66c-c066-47b7-b388-ba70a32bb0d0' {
menuentry 'Ubuntu, avec Linux 3.13.0-49-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-49-generic-advanced-9b6fe66c-c066-47b7-b388-ba70a32bb0d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
else
search --no-floppy --fs-uuid --set=root 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
fi
echo 'Chargement de Linux 3.13.0-49-generic…'
linux /boot/vmlinuz-3.13.0-49-generic root=UUID=9b6fe66c-c066-47b7-b388-ba70a32bb0d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-49-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-49-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-49-generic-init-upstart-9b6fe66c-c066-47b7-b388-ba70a32bb0d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
else
search --no-floppy --fs-uuid --set=root 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
fi
echo 'Chargement de Linux 3.13.0-49-generic…'
linux /boot/vmlinuz-3.13.0-49-generic root=UUID=9b6fe66c-c066-47b7-b388-ba70a32bb0d0 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-49-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-49-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-49-generic-recovery-9b6fe66c-c066-47b7-b388-ba70a32bb0d0' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
else
search --no-floppy --fs-uuid --set=root 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
fi
echo 'Chargement de Linux 3.13.0-49-generic…'
linux /boot/vmlinuz-3.13.0-49-generic root=UUID=9b6fe66c-c066-47b7-b388-ba70a32bb0d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-49-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
else
search --no-floppy --fs-uuid --set=root 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
else
search --no-floppy --fs-uuid --set=root 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=9b6fe66c-c066-47b7-b388-ba70a32bb0d0 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=e8d79b14-3070-44ba-99f6-9699167221b8 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
# search path for the c32 support libraries (libcom32, libutil etc.)
path
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
ldlinux.c32 : not a COM32/COM32R module
syslinux/chain.c32 : not a COM32/COM32R module
syslinux/gfxboot.c32 : not a COM32/COM32R module
syslinux/ldlinux.c32 : not a COM32/COM32R module
syslinux/libcom32.c32 : not a COM32/COM32R module
syslinux/libutil.c32 : not a COM32/COM32R module
syslinux/vesamenu.c32 : not a COM32/COM32R module
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
File descriptor 9 (/proc/11744/mounts) leaked on lvs invocation. Parent PID 17639: bash
File descriptor 63 (pipe:[153981]) leaked on lvs invocation. Parent PID 17639: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-04-27__20h27 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in live-session (Ubuntu 15.04, vivid, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
bootkbd=fr-latin1 console-setup/layoutcode=fr console-setup/variantcode=nodeadkeys locale=fr_FR noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz splash -- maybe-ubiquity
ls: cannot access /home/usr/.config: No such file or directory
=================== os-prober:
/dev/sda1:Ubuntu 15.04 (15.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="9b6fe66c-c066-47b7-b388-ba70a32bb0d0" TYPE="ext4" PARTUUID="00089b77-01"
/dev/sdb1: UUID="BC67-7FC7" TYPE="vfat"
/dev/loop0: TYPE="squashfs"
/dev/sda5: UUID="e8d79b14-3070-44ba-99f6-9699167221b8" TYPE="swap" PARTUUID="00089b77-05"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
sfdisk: Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 26 14:42 grub.d
total 76
-rwxr-xr-x 1 root root 9424 avril 11 2014 00_header
-rwxr-xr-x 1 root root 6058 avril 10 2014 05_debian_theme
-rwxr-xr-x 1 root root 12261 avril 6 20:43 10_linux
-rwxr-xr-x 1 root root 11082 avril 6 20:43 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 11 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 avril 11 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 11 2014 40_custom
-rwxr-xr-x 1 root root 216 avril 11 2014 41_custom
-rw-r--r-- 1 root root 483 avril 11 2014 README
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda1recordfail=1/grub/grubenv :
recordfail=1
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ng grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA Samsung SSD 840 (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 246GB 246GB primary ext4 boot
2 246GB 250GB 4292MB extended
5 246GB 250GB 4292MB logical linux-swap(v1)
Model: TOSHIBA TransMemory (scsi)
Disk /dev/sdb: 2063MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 65.5kB 2063MB 2062MB primary fat32 boot
=================== parted -lm:
BYT;
/dev/sda:250GB:scsi:512:512:msdos:ATA Samsung SSD 840:;
1:1049kB:246GB:246GB:ext4::boot;
2:246GB:250GB:4292MB:::;
5:246GB:250GB:4292MB:linux-swap(v1)::;
BYT;
/dev/sdb:2063MB:scsi:512:512:msdos:TOSHIBA TransMemory:;
1:65.5kB:2063MB:2062MB:fat32::boot;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
fd0 disk 4K
sda disk 232,9G Samsung SSD 840
sda1 part ext4 228,9G 9b6fe66c-c066-47b7-b388-ba70a32bb0d0
sda2 part 1K
sda5 part swap 4G e8d79b14-3070-44ba-99f6-9699167221b8
sdb disk 1,9G TransMemory
sdb1 part vfat 1,9G BC67-7FC7
sr0 rom 1024M CDDVDW SH-222AB
loop0 loop squashfs 1G
KNAME ROTA RO RM STATE MOUNTPOINT
fd0 1 0 1
sda 0 0 0 running
sda1 0 0 0 /mnt/boot-sav/sda1
sda2 0 0 0
sda5 0 0 0 [SWAP]
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,relatime,size=2011028k,nr_inodes=502757,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=404656k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (rw,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb,release_agent=/run/cgmanager/agents/cgm-release-agent.hugetlb)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=21,pgrp=1,timeout=300,minproto=5,maxproto=5,direct)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
cgmfs on /run/cgmanager/fs type tmpfs (rw,relatime,size=100k,mode=755)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=404656k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/fd0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd fd0 full fuse fw0 hidraw0 hidraw1 hidraw2 hpet hugepages i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg kvm log mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vfio vga_arbiter vhci vhost-net xconsole zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 2.0G 0 2.0G 0% /dev
tmpfs tmpfs 396M 12M 385M 3% /run
/dev/sdb1 vfat 2.0G 1.1G 867M 56% /cdrom
/dev/loop0 squashfs 1.1G 1.1G 0 100% /rofs
/cow overlay 2.0G 552M 1.4G 28% /
tmpfs tmpfs 2.0G 84K 2.0G 1% /dev/shm
tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock
tmpfs tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
tmpfs tmpfs 2.0G 1.2M 2.0G 1% /tmp
cgmfs tmpfs 100K 0 100K 0% /run/cgmanager/fs
tmpfs tmpfs 396M 72K 396M 1% /run/user/999
/dev/sda1 ext4 226G 31G 184G 15% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/loop0: 1 GiB, 1101672448 bytes, 2151704 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00089b77
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 480012287 480010240 228.9G 83 Linux
/dev/sda2 480014334 488396799 8382466 4G 5 Extended
/dev/sda5 480014336 488396799 8382464 4G 82 Linux swap / Solaris
Disk /dev/sdb: 1.9 GiB, 2062548992 bytes, 4028416 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 128 4028415 4028288 1.9G b W95 FAT32
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== User settings
The settings chosen by the user will not act on the boot.
Il y a une grosse anomalie : ton fichier grub.cfg ne contient que des noyaux 3.13.0-x qui sont les noyaux de Ubuntu 14.04 : normalement tu devrais avoir des noyaux 3.19.0-x
Est-ce que tu as fait une mise à niveau de Ubuntu 14.04 vers Ubuntu 15.04 ?
Hors ligne
#5 Le 28/04/2015, à 06:23
- CRIMA
Re : ouverture session impossible suite mise à jour ubuntu15.04
Bonsoir,Je viens d'installer la dernière mise à jour d'ubuntu 15.04.
Mon fond d'écran s'affiche normalement.
Lorsque je tape mon mot de passe de session, la session ne souvre pas et revient sur la demande de mot de passe avec mon fond d'écran.
Je vois brièvement un écran noir avec quelques messages que je n'ai pas le temps de lire
Impossible également d'ouvrir la session invité....
Merci,
Bonjour
J'ai rencontré le même problème lors d'une migration de 14.10 vers 15.04.
Je suis la discussion.
Salutations
Ordi HP Z200 - Processeur Intel I3 - chipset graphique IntelHD - 8 Go ram -
Hors ligne
#6 Le 01/05/2015, à 13:57
- Dawen
Re : ouverture session impossible suite mise à jour ubuntu15.04
Bonjour J'ai le même probleme lors d'une migration de Kubuntu 14.10 a 15.04.
J'ai fait un boot-info mais j'ai bien des noyau 3.19.0.x
Hors ligne
#7 Le 01/05/2015, à 14:20
- malbo
Re : ouverture session impossible suite mise à jour ubuntu15.04
mais j'ai bien des noyau 3.19.0.x
Donc ce n'est pas forcément le même problème. Je te suggère de créer une nouvelle discussion pour ton cas perso (les indications pour le faire sont là)
EDIT : il y a aussi cette discussion sur le sujet : http://forum.ubuntu-fr.org/viewtopic.php?id=1826261
dans laquelle 3lg donne (c'est là) des liens qui peuvent te concerner
Dernière modification par malbo (Le 01/05/2015, à 17:19)
Hors ligne