[RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

Corto Celtic · Le 12/01/2016, à 15:48

Je voudrais savoir si une personne peut me conseiller
sur l'installation de Ubuntu sur cette machine.
Cette machine tourne sous Linpus et je voudrais la replacer par une Ubuntu.

Merci et bonne année a toutes et tous

Dernière modification par Corto Celtic (Le 03/12/2016, à 20:18)

Caribou22 · Le 12/01/2016, à 15:53

Bonjour,
Je ne connais pas ce modèle en particulier, mais d'après la config matérielle il acceptera n'importe quelle distribution donc installe ce qui t'es le plus familier tout simplement

Setsuneh · Le 13/01/2016, à 03:12

Salut !

Autant créer une clé USB bootable Ubuntu et la tester en live avant toute installation (1er choix dans le menu normalement).

Corto Celtic · Le 13/01/2016, à 15:12

Je viens d'acheter cette petite machine (ES1 131 C8YK) plus une SD carte de 64G....
Je charge la batterie et je me lance dans l'installation de Ubuntu avec un clef USB.
Je vais utiliser UNetbootin.

malbo · Le 13/01/2016, à 15:39

Tu serais bien inspiré d'essayer puis d'installer la dernière version de Ubuntu : Ubuntu 15.10 64 bits Non : vois d'abord EDIT 2. Motif : il y avait un bug de Ubuntu pour gérer ton composant de stockage 32 Go (techno eMMC). D'après ce que je retire de ce rapport de bug #1454013, il semble que le problème est réglé à présent.

EDIT 1 : j'ai trouvé aussi que AGRR a installé cette version 15.10 de Ubuntu dans son "aspire ES1 131" : https://forum.ubuntu-fr.org/viewtopic.p … #p21249501
mais je ne sais pas si son modèle est exactement le tien (?)

EDIT 2 : d'après ce fil (ici), je pense qu'il est possible que Ubuntu 14.04.3 64 bits convienne aussi. Si tu veux essayer, tu peux suivre cette procédure pour faire une liveUSB : http://forum.ubuntu-fr.org/viewtopic.php?id=1893601

Dernière modification par malbo (Le 13/01/2016, à 16:05)

Corto Celtic · Le 13/01/2016, à 16:05

bonjour Malbo,
alors le "live UNetbootin" passe mais j'ais pas de curseur a l'écran, c'est un peu gênant comme dirait l'autre
Je peux quand meme ouvrir le terninal ....

Je vais essayer de faire une clef USB avec autre chose (je prend les conseils et suggestions).
Ou je peux trouver Ubuntu 15.xxxx ?

malbo · Le 13/01/2016, à 16:07

J'ai modifié mon post #5 entre temps. Essaie plutôt 14.04.3 64 bits (j'indique la procédure pour faire la LiveUSB)

Corto Celtic · Le 13/01/2016, à 16:25

Mdr,
Je n'ais plus de Windows chez moi !
Mon dernier portable en double-boot avec K2000 a claqué après 17 ans de bon services
Je vais donc installer LiLi sur cette nouvelle machine sous Windows 10 (c'est un comble !).
Et avec ce MMC de 32Go je vais surment écraser W10 a moins que je puisse installer Ubuntu sur une micro clef USB, mais j'en doute fort....

malbo · Le 13/01/2016, à 18:47

Corto Celtic,
J'ai l'habitude d'aider les novices qui ont un Windows pré-installé dans leur ordi, c'est pourquoi je t'ai proposé ma recette. Si tu n'as pas de Windows, tu peux utiliser Unetbootin qui est je pense le plus sérieux pour réaliser une LiveUSB Ubuntu. Aide-toi quand même de ma procédure pour la partie téléchargement à l'avance et vérification du md5sum.

Dernière modification par malbo (Le 13/01/2016, à 18:49)

Corto Celtic · Le 13/01/2016, à 18:50

Milles excuses Malbo, je n'avais pas bien lu tes posts

Donc Je reprend tout a Zéro pour l'installation de Ubuntu 14.04.3 sur cette petite machine a 239€ !

1 - Faire une clef USB Ubuntu bootable avec UNetboutin sous Linux ou LiLi usb sous Windows.

2 - Démarrer l'ordi et immédiatement tapoter sur la touche F2 pour avoir accès au Bios.

3 - Dans le Bios allez activer la touche F12 qui permet au prochain démarrage en tapotant dessus,
de choisir le boot de votre choix, 1 ou 2.
-Démarrage Windows - 1. Windows Boot Manager (Generic SD/MMC Storage)
-Démarrage Linux sur votre clef USB - 2. USB HDD: ......
Toujours dans le Bios:
Déactiver "Mode avanced" pour "basic" du Touchepad.

4 - Quitter le Bios en "Save and Exit" et éteindre l'ordi.

5 - Brancher le câble de connexion internet et la clef USB contenant le "live Ubuntu".

6 - Allumer l'ordi et tapoter immédiatement sur la touche F12.
Sur cet écran, choisir avec les touches flèche du clavier le Boot "USB.........".
Valider avec la touche "entré"

7 - Choisir sur la fenêtre qui viens de s´ouvrir l'option qui convient:
-essayer Ubuntu sans rien changer au systeme

8 - Après avoir essayer Ubuntu en "live" et qu'il convient:

Pour l’installation ajouter au chapitre 3 (dans le Bios):
Mettre un mot de passe dans "Security: set supervisor password" (exemple: blablabla).
Laisser le Boot en UEFI.
Laisser le "Boot - SecureBoot" sur "enabled".
Éteindre l'ordi

9 - Cable internet, Usb "live" connecté, démarrer l'ordi en tapotant sur la touche F12.
Choisir avec les touches flèche du clavier le Boot "USB........."
Choisir "instal Ubuntu".
Suivre les différents instructions qui suivront et y répondre.
Si un message d'erreur apparaît pendant l'installation simplement cliquer sur "ignorer".
Une fois l´installation terminée éteindre l'ordi et enlever le "live USB".
.

10 - Retourner dans le Bios (allumer l'ordi et tapoter F2)
Aller à: "Security - Select an UEFI file as trusted for executing" ou ce qu'y lui ressemble.
Cliquer la touche "enter".
EMMC ou autre chose apparaît, cliquer "enter".
(il se peut qu'autres lignes viennent: "Efi, cliquer enter", choisir:grubx64.efi, cliquer enter)
Avec les flèches du clavier choir "Ubuntu", cliquer "enter".
Dans cette fenêtre taper "linux" ou autre....
Valider le tous avec "enter" et F10 pour sortir du Bios.
Éteindre l'ordi.

Voilà c'est fini,
Au prochain démarrage vous avez Ubuntu qui est là

Dernière modification par Corto Celtic (Le 28/01/2016, à 19:32)

Corto Celtic · Le 14/01/2016, à 14:17

Je lance l'installation depuis l’icône sur le bureau de Ubuntu et après 2 étapes je clique
sur télécharger les mises a jour et installer ce logiciel tiers et un message viens
" Error fsyncing/dev/mmcblk0rpmb:Input error"

J'ais cliquer sur "Ignore" !

Dernière modification par Corto Celtic (Le 14/01/2016, à 14:31)

malbo · Le 14/01/2016, à 15:27

Redémarre en session live (Essayer sans installer) et fais un Boot-Info depuis cette session live. Donne l'URL de ce Boot-Info dans ta réponse.

Corto Celtic · Le 14/01/2016, à 15:53

Voila le boot info

http://paste.ubuntu.com/14496005/

malbo · Le 14/01/2016, à 20:20

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 9Feb2015]


============================= Boot Info Summary: ===============================

 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20140113
    Boot sector info:  Syslinux looks at sector 10180960 of /dev/sda1 for 
                       its second stage. SYSLINUX is installed in the  
                       directory. No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 16.0 GB, 16008609792 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *             32    31,266,815    31,266,784   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/mmcblk0p1   617476c8-d40b-4dab-b92a-eccc512c4c22   ext4       
/dev/mmcblk0p5   edcb97c8-7167-450b-a771-4ee3115b0fa4   swap       
/dev/sda1        A442-750D                              vfat       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root 13 Jan 14 13:50 mmc-HBG4e__0x866b3d63 -> ../../mmcblk0
lrwxrwxrwx 1 root root 15 Jan 14  2016 mmc-HBG4e__0x866b3d63-part1 -> ../../mmcblk0p1
lrwxrwxrwx 1 root root 15 Jan 14  2016 mmc-HBG4e__0x866b3d63-part2 -> ../../mmcblk0p2
lrwxrwxrwx 1 root root 15 Jan 14  2016 mmc-HBG4e__0x866b3d63-part5 -> ../../mmcblk0p5
lrwxrwxrwx 1 root root  9 Jan 14 13:50 usb-SanDisk_Cruzer_Fit_4C530009070219116502-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 14  2016 usb-SanDisk_Cruzer_Fit_4C530009070219116502-0:0-part1 -> ../../sda1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/mmcblk0p1   /media/ubuntu/617476c8-d40b-4dab-b92a-eccc512c4c22 ext4       (rw,nosuid,nodev,uhelper=udisks2)
/dev/sda1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sda1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100

label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --

label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit 

label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper  quiet splash --

label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity  quiet splash --

label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check  quiet splash --

label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit 

label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit 

label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --

label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --

label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --

label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --

--------------------------------------------------------------------------------

============== sda1: Version of COM32(R) files used by Syslinux: ===============

 menu.c32                           :  COM32R module (v4.xx)

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/4156/mounts) leaked on lvs invocation. Parent PID 10455: bash
File descriptor 63 (pipe:[48660]) leaked on lvs invocation. Parent PID 10455: bash
  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4128768: Input/output error
  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4186112: Input/output error
  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 0: Input/output error
  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4096: Input/output error
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-info 2016-01-14__13h50 ===================
boot-info version : 4ppa35
boot-sav version : 4ppa35
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa35
boot-info is executed in live-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
ls: cannot access /home/usr/.config: No such file or directory
cat: /sys/block/mmcblk0/mmcblk0boot0/start: No such file or directory
cat: /sys/block/mmcblk0/mmcblk0boot1/start: No such file or directory
cat: /sys/block/mmcblk0/mmcblk0rpmb/start: No such file or directory
Disk /dev/mmcblk0boot1 doesn't contain a valid partition table
Disk /dev/mmcblk0boot0 doesn't contain a valid partition table

=================== os-prober:
/dev/mmcblk0p1:Ubuntu 14.04.3 LTS (14.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/mmcblk0p1: UUID="617476c8-d40b-4dab-b92a-eccc512c4c22" TYPE="ext4"
/dev/mmcblk0p5: UUID="edcb97c8-7167-450b-a771-4ee3115b0fa4" TYPE="swap"
/dev/sda1: UUID="A442-750D" TYPE="vfat"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.

=================== /media/ubuntu/617476c8-d40b-4dab-b92a-eccc512c4c22/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 Aug  5 05:20 grub.d
total 76
-rwxr-xr-x 1 root root  9424 Jun 26  2015 00_header
-rwxr-xr-x 1 root root  6058 May 13  2015 05_debian_theme
-rwxr-xr-x 1 root root 11608 Jun 26  2015 10_linux
-rwxr-xr-x 1 root root 10412 Jun 26  2015 20_linux_xen
-rwxr-xr-x 1 root root  1992 Mar 12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 26  2015 30_os-prober
-rwxr-xr-x 1 root root  1416 Jun 26  2015 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Jun 26  2015 40_custom
-rwxr-xr-x 1 root root   216 Jun 26  2015 41_custom
-rw-r--r-- 1 root root   483 Jun 26  2015 README




=================== /media/ubuntu/617476c8-d40b-4dab-b92a-eccc512c4c22/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== mmcblk0p1recordfail=1/grub/grubenv :
recordfail=1




=================== efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 2001,2002,2003
Boot0000* USB HDD: SanDisk Cruzer Fit	ACPI(a0341d0,0)PCI(14,0)USB(0,0)HD(1,20,1dd17e0,00000000)RC
Boot0001* Unknown Device: 	RC...0
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.


=================== PARTITIONS & DISKS:
mmcblk0p1	: mmcblk0,	not-sepboot,	grubenv-ng	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	/media/ubuntu/617476c8-d40b-4dab-b92a-eccc512c4c22.

mmcblk0	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	1 sectors * 512 bytes


=================== parted -l:

Model: SanDisk Cruzer Fit (scsi)
Disk /dev/sda: 16.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      16.4kB  16.0GB  16.0GB  primary  fat32        boot, lba


Error: /dev/mmcblk0rpmb: unrecognised disk label
Warning: Error fsyncing/closing /dev/mmcblk0rpmb: Input/output error

Error: /dev/mmcblk0boot0: unrecognised disk label

Error: /dev/mmcblk0boot1: unrecognised disk label

Model: MMC HBG4e (sd/mmc)
Disk /dev/mmcblk0: 31.3GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
1      1049kB  27.1GB  27.1GB  primary   ext4            boot
2      27.1GB  31.3GB  4209MB  extended
5      27.1GB  31.3GB  4209MB  logical   linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:16.0GB:scsi:512:512:msdos:SanDisk Cruzer Fit;
1:16.4kB:16.0GB:16.0GB:fat32::boot, lba;

Error: /dev/mmcblk0rpmb: unrecognised disk label
Warning: Error fsyncing/closing /dev/mmcblk0rpmb: Input/output error

Error: /dev/mmcblk0boot0: unrecognised disk label

Error: /dev/mmcblk0boot1: unrecognised disk label

BYT;
/dev/mmcblk0:31.3GB:sd/mmc:512:512:msdos:MMC HBG4e;
1:1049kB:27.1GB:27.1GB:ext4::boot;
2:27.1GB:31.3GB:4209MB:::;
5:27.1GB:31.3GB:4209MB:linux-swap(v1)::;

=================== lsblk:
KNAME        TYPE FSTYPE     SIZE LABEL
sda          disk           14.9G
sda1         part vfat      14.9G
loop0        loop squashfs 962.1M
mmcblk0rpmb  disk              4M
mmcblk0boot0 disk              4M
mmcblk0boot1 disk              4M
mmcblk0      disk           29.1G
mmcblk0p1    part ext4      25.2G
mmcblk0p2    part              1K
mmcblk0p5    part swap       3.9G

KNAME        ROTA RO RM STATE   MOUNTPOINT
sda             1  0  1 running
sda1            1  0  1         /cdrom
loop0           1  1  0         /rofs
mmcblk0rpmb     0  0  0
mmcblk0boot0    0  1  0
mmcblk0boot1    0  1  0
mmcblk0         0  0  0
mmcblk0p1       0  0  0         /media/ubuntu/617476c8-d40b-4dab-b92a-eccc512c4c
mmcblk0p2       0  0  0
mmcblk0p5       0  0  0


=================== mount:
/cow on / type overlay (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sda1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/mmcblk0p1 on /media/ubuntu/617476c8-d40b-4dab-b92a-eccc512c4c22 type ext4 (rw,nosuid,nodev,uhelper=udisks2)


=================== ls:
/sys/block/mmcblk0 (filtered):  alignment_offset bdi capability dev device discard_alignment ext_range force_ro holders inflight mmcblk0boot0 mmcblk0boot1 mmcblk0p1 mmcblk0p2 mmcblk0p5 mmcblk0rpmb power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/mmcblk0boot0 (filtered):  alignment_offset bdi capability dev device discard_alignment ext_range force_ro holders inflight power queue range removable ro ro_lock_until_next_power_on size slaves stat subsystem trace uevent
/sys/block/mmcblk0boot1 (filtered):  alignment_offset bdi capability dev device discard_alignment ext_range force_ro holders inflight power queue range removable ro ro_lock_until_next_power_on size slaves stat subsystem trace uevent
/sys/block/mmcblk0rpmb (filtered):  alignment_offset bdi capability dev device discard_alignment ext_range force_ro holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 input kmsg kvm log mapper mcelog media0 mei0 mem memory_bandwidth mmcblk0 mmcblk0boot0 mmcblk0boot1 mmcblk0p1 mmcblk0p2 mmcblk0p5 mmcblk0rpmb net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control
Disk /dev/mmcblk0boot1 doesn't contain a valid partition table
Disk /dev/mmcblk0boot0 doesn't contain a valid partition table

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/cow           overlay   1.9G  121M  1.8G   7% /
udev           devtmpfs  1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs     387M  1.2M  386M   1% /run
/dev/sda1      vfat       15G  4.9G   11G  33% /cdrom
/dev/loop0     squashfs  963M  963M     0 100% /rofs
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs     1.9G  1.3M  1.9G   1% /tmp
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     1.9G   80K  1.9G   1% /run/shm
none           tmpfs     100M   64K  100M   1% /run/user
/dev/mmcblk0p1 ext4       25G  4.0G   20G  17% /media/ubuntu/617476c8-d40b-4dab-b92a-eccc512c4c22

=================== fdisk -l:

Disk /dev/mmcblk0: 31.3 GB, 31272730624 bytes
255 heads, 63 sectors/track, 3802 cylinders, total 61079552 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000de57c

Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1   *        2048    52854783    26426368   83  Linux
/dev/mmcblk0p2        52856830    61077503     4110337    5  Extended
/dev/mmcblk0p5        52856832    61077503     4110336   82  Linux swap / Solaris

Disk /dev/mmcblk0boot1: 4 MB, 4194304 bytes
4 heads, 16 sectors/track, 128 cylinders, total 8192 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x011b011d


Disk /dev/mmcblk0boot0: 4 MB, 4194304 bytes
4 heads, 16 sectors/track, 128 cylinders, total 8192 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x011b011c


Disk /dev/sda: 16.0 GB, 16008609792 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *          32    31266815    15633392    c  W95 FAT32 (LBA)




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of mmcblk0p1 into the MBR of mmcblk0.
The boot flag would be placed on mmcblk0p1.
Additional repair would be performed: unhide-bootmenu-10s


=================== Advice in case of suggested repair
The boot of your PC is in EFI mode, but no EFI partition was detected. You may want to retry after creating a EFI partition (FAT32, 100MB~250MB, start of the disk, boot flag).
Do you want to continue?


=================== User settings
The settings chosen by the user will not act on the boot.

J'y vois que tu as démarré ta session live en mode EFI :

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.

Je ne suis pas absolument sûr de ça mais je crois qu'il faut que tu démarres en mode Legacy (non-EFI) pour ta session live. Pour être certain d'être en mode non-EFI, tu peux passer cette commande depuis la session live (source) :

[ -d /sys/firmware/efi ] && echo "Session EFI" || echo "Session non-EFI"

Après ça, tu pourras réessayer d'installer depuis cette session non-EFI (icône de l'installateur sur le bureau)

Dernière modification par malbo (Le 14/01/2016, à 20:24)

malbo · Le 15/01/2016, à 09:52

Je pense que j'ai raconté des conneries dans mon post précédent en te recommandant d'installer en mode non-EFI. Je vais m'expliquer ci-dessous.
Dans ce fil créé par kirasole pour son ordi Aspire ES1-131 sur le forum anglais de Ubuntu, on peut voir :

Attention : c'est le Boot-Info de kirasole

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 9Feb2015]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 7/2008: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi 
                       /EFI/BOOT/grubx64.efi

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 4026 MB, 4026531840 bytes
256 heads, 63 sectors/track, 487 cylinders, total 7864320 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 4,294,967,295 4,294,967,295  ee GPT

/dev/sda1 ends after the last sector of /dev/sda

GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048     7,864,286     7,862,239 Data partition (Windows/Linux)

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/mmcblk0p1   8E42-D5AF                              vfat       
/dev/mmcblk0p2   6c9b290c-2ac3-4865-ac91-740cf7fd6532   ext4       
/dev/mmcblk0p3   0f1ab988-bf94-44a7-9a6a-993fa43bfc0d   ext4       
/dev/sda1        107E-1A79                              vfat       UBUNTU14

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root 13 Sep  1 13:53 mmc-HBG4e__0x6be1f020 -> ../../mmcblk0
lrwxrwxrwx 1 root root 15 Sep  1 13:39 mmc-HBG4e__0x6be1f020-part1 -> ../../mmcblk0p1
lrwxrwxrwx 1 root root 15 Sep  1 13:39 mmc-HBG4e__0x6be1f020-part2 -> ../../mmcblk0p2
lrwxrwxrwx 1 root root 15 Sep  1 13:39 mmc-HBG4e__0x6be1f020-part3 -> ../../mmcblk0p3
lrwxrwxrwx 1 root root  9 Sep  1 13:52 usb-Verbatim_Store_n_Go_Drive_1240000000140345-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep  1 13:39 usb-Verbatim_Store_n_Go_Drive_1240000000140345-0:0-part1 -> ../../sda1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/mmcblk0p2   /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532 ext4       (rw,nosuid,nodev,uhelper=udisks2)
/dev/mmcblk0p3   /media/ubuntu/0f1ab988-bf94-44a7-9a6a-993fa43bfc0d ext4       (rw,nosuid,nodev,uhelper=udisks2)
/dev/sda1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sda1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
DEFAULT loadconfig

LABEL loadconfig
  CONFIG /isolinux/isolinux.cfg
  APPEND /isolinux/
--------------------------------------------------------------------------------

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/4836/mounts) leaked on lvs invocation. Parent PID 13811: bash
File descriptor 63 (pipe:[50453]) leaked on lvs invocation. Parent PID 13811: bash
  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4128768: Input/output error
  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4186112: Input/output error
  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 0: Input/output error
  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4096: Input/output error
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2015-09-01__13h52 ===================
boot-repair version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-repair is executed in live-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
ls: cannot access /home/usr/.config: No such file or directory
cat: /sys/block/mmcblk0/mmcblk0boot0/start: No such file or directory
cat: /sys/block/mmcblk0/mmcblk0boot1/start: No such file or directory
cat: /sys/block/mmcblk0/mmcblk0rpmb/start: No such file or directory

WARNING: GPT (GUID Partition Table) detected on '/dev/mmcblk0'! The util fdisk doesn't support GPT. Use GNU Parted.

Disk /dev/mmcblk0boot1 doesn't contain a valid partition table
Disk /dev/mmcblk0boot0 doesn't contain a valid partition table

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/mmcblk0p2:Ubuntu 14.04.3 LTS (14.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/mmcblk0p1: UUID="8E42-D5AF" TYPE="vfat"
/dev/mmcblk0p2: UUID="6c9b290c-2ac3-4865-ac91-740cf7fd6532" TYPE="ext4"
/dev/mmcblk0p3: UUID="0f1ab988-bf94-44a7-9a6a-993fa43bfc0d" TYPE="ext4"
/dev/sda1: LABEL="UBUNTU14" UUID="107E-1A79" TYPE="vfat"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


WARNING: GPT (GUID Partition Table) detected on '/dev/mmcblk0'! The util sfdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/mmcblk0'! The util fdisk doesn't support GPT. Use GNU Parted.

Presence of EFI/Microsoft file detected: /media/ubuntu/8E42-D5AF/EFI/Microsoft/bootmgfw.efi
Presence of EFI/Microsoft file detected: /media/ubuntu/8E42-D5AF/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /media/ubuntu/8E42-D5AF/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /media/ubuntu/8E42-D5AF/EFI/Boot/bootx64.efi

=================== /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 Aug 31 21:51 grub.d
drwxr-xr-x  2 root root    4096 Aug 31 21:48 grub.d.bak
total 76
-rwxr-xr-x 1 root root  9424 Jun 26 11:16 00_header
-rwxr-xr-x 1 root root  6058 May 13 14:51 05_debian_theme
-rwxr-xr-x 1 root root 11608 Jun 26 11:16 10_linux
-rwxr-xr-x 1 root root 10412 Jun 26 11:16 20_linux_xen
-rwxr-xr-x 1 root root   170 Aug 31 21:51 25_custom
-rwxr-xr-x 1 root root 11692 Jun 26 11:16 30_os-prober
-rwxr-xr-x 1 root root  1416 Jun 26 11:16 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Jun 26 11:16 40_custom
-rwxr-xr-x 1 root root   216 Jun 26 11:16 41_custom
-rw-r--r-- 1 root root   483 Jun 26 11:16 README




=================== /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of mmcblk0p2: UUID=8E42-D5AF	 (mmcblk0p1)

=================== efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0003,0000
Boot0000* USB HDD: VerbatimStore n Go Drive	ACPI(a0341d0,0)PCI(14,0)USB(1,0)HD(1,800,77f7df,fae5c804-518a-4f6c-b083-58b5c51908ab)RC
Boot0003* ubuntu	HD(1,800,32000,fc73d5d8-9a27-4d8b-8fd9-c066d7ecaa1b)File(EFIubuntugrubx64.efi)
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
mmcblk0p1	: mmcblk0,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/media/ubuntu/8E42-D5AF.
mmcblk0p2	: mmcblk0,	not-sepboot,	grubenv-ok	grub2,	grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	/media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532.
mmcblk0p3	: mmcblk0,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/media/ubuntu/0f1ab988-bf94-44a7-9a6a-993fa43bfc0d.

mmcblk0	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	1 sectors * 512 bytes


=================== parted -l:

Model: Verbatim Store n Go Drive (scsi)
Disk /dev/sda: 4027MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system  Name                  Flags
1      1049kB  4027MB  4025MB  fat32        Microsoft Basic Data  msftdata


Error: /dev/mmcblk0rpmb: unrecognised disk label
Warning: Error fsyncing/closing /dev/mmcblk0rpmb: Input/output error

Error: /dev/mmcblk0boot0: unrecognised disk label

Error: /dev/mmcblk0boot1: unrecognised disk label

Model: MMC HBG4e (sd/mmc)
Disk /dev/mmcblk0: 31.3GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system  Name                  Flags
1      1049kB  106MB   105MB   fat32        EFI System Partition  boot
2      106MB   15.2GB  15.1GB  ext4
3      15.2GB  31.3GB  16.1GB  ext4

=================== parted -lm:

BYT;
/dev/sda:4027MB:scsi:512:512:gpt:Verbatim Store n Go Drive;
1:1049kB:4027MB:4025MB:fat32:Microsoft Basic Data:msftdata;

Error: /dev/mmcblk0rpmb: unrecognised disk label
Warning: Error fsyncing/closing /dev/mmcblk0rpmb: Input/output error

Error: /dev/mmcblk0boot0: unrecognised disk label

Error: /dev/mmcblk0boot1: unrecognised disk label

BYT;
/dev/mmcblk0:31.3GB:sd/mmc:512:512:gpt:MMC HBG4e;
1:1049kB:106MB:105MB:fat32:EFI System Partition:boot;
2:106MB:15.2GB:15.1GB:ext4::;
3:15.2GB:31.3GB:16.1GB:ext4::;

=================== lsblk:
KNAME        TYPE FSTYPE     SIZE LABEL    MODEL    UUID
sda          disk            3.8G          Store n
sda1         part vfat       3.8G UBUNTU14          107E-1A79
loop0        loop squashfs 962.1M
mmcblk0rpmb  disk              4M
mmcblk0boot0 disk              4M
mmcblk0boot1 disk              4M
mmcblk0      disk           29.1G
mmcblk0p1    part vfat       100M                   8E42-D5AF
mmcblk0p2    part ext4        14G                   6c9b290c-2ac3-4865-ac91-740cf7fd6532
mmcblk0p3    part ext4        15G                   0f1ab988-bf94-44a7-9a6a-993fa43bfc0d

KNAME        ROTA RO RM STATE   MOUNTPOINT
sda             1  0  1 running
sda1            1  0  1         /cdrom
loop0           1  1  0         /rofs
mmcblk0rpmb     0  0  0
mmcblk0boot0    0  1  0
mmcblk0boot1    0  1  0
mmcblk0         0  0  0
mmcblk0p1       0  0  0         /media/ubuntu/8E42-D5AF
mmcblk0p2       0  0  0         /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd65
mmcblk0p3       0  0  0         /media/ubuntu/0f1ab988-bf94-44a7-9a6a-993fa43bfc


=================== mount:
/cow on / type overlay (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sda1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/mmcblk0p3 on /media/ubuntu/0f1ab988-bf94-44a7-9a6a-993fa43bfc0d type ext4 (rw,nosuid,nodev,uhelper=udisks2)
/dev/mmcblk0p2 on /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532 type ext4 (rw,nosuid,nodev,uhelper=udisks2)
/dev/mmcblk0p1 on /media/ubuntu/8E42-D5AF type vfat (rw,nosuid,nodev,uid=999,gid=999,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)


=================== ls:
/sys/block/mmcblk0 (filtered):  alignment_offset bdi capability dev device discard_alignment ext_range force_ro holders inflight mmcblk0boot0 mmcblk0boot1 mmcblk0p1 mmcblk0p2 mmcblk0p3 mmcblk0rpmb power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/mmcblk0boot0 (filtered):  alignment_offset bdi capability dev device discard_alignment ext_range force_ro holders inflight power queue range removable ro ro_lock_until_next_power_on size slaves stat subsystem trace uevent
/sys/block/mmcblk0boot1 (filtered):  alignment_offset bdi capability dev device discard_alignment ext_range force_ro holders inflight power queue range removable ro ro_lock_until_next_power_on size slaves stat subsystem trace uevent
/sys/block/mmcblk0rpmb (filtered):  alignment_offset bdi capability dev device discard_alignment ext_range force_ro holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 input kmsg kvm log mapper mcelog media0 mei0 mem memory_bandwidth mmcblk0 mmcblk0boot0 mmcblk0boot1 mmcblk0p1 mmcblk0p2 mmcblk0p3 mmcblk0rpmb net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/mmcblk0p1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 01 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  10 00 04 00 00 08 00 00  |................|
00000020  00 20 03 00 28 06 00 00  00 00 00 00 02 00 00 00  |. ..(...........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 af d5 42 8e 20  20 20 20 20 20 20 20 20  |..)..B.         |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/mmcblk0'! The util fdisk doesn't support GPT. Use GNU Parted.

Disk /dev/mmcblk0boot1 doesn't contain a valid partition table
Disk /dev/mmcblk0boot0 doesn't contain a valid partition table

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/cow           overlay   958M  100M  859M  11% /
udev           devtmpfs  947M   12K  947M   1% /dev
tmpfs          tmpfs     192M  1.3M  191M   1% /run
/dev/sda1      vfat      3.8G 1006M  2.8G  27% /cdrom
/dev/loop0     squashfs  963M  963M     0 100% /rofs
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs     958M  1.2M  957M   1% /tmp
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     958M  148K  958M   1% /run/shm
none           tmpfs     100M   68K  100M   1% /run/user
/dev/mmcblk0p3 ext4       15G   38M   14G   1% /media/ubuntu/0f1ab988-bf94-44a7-9a6a-993fa43bfc0d
/dev/mmcblk0p2 ext4       14G  4.5G  8.6G  35% /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532
/dev/mmcblk0p1 vfat       99M  3.3M   96M   4% /media/ubuntu/8E42-D5AF

=================== fdisk -l:

Disk /dev/mmcblk0: 31.3 GB, 31272730624 bytes
255 heads, 63 sectors/track, 3802 cylinders, total 61079552 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x46e2d623

Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1               1    61079551    30539775+  ee  GPT

Disk /dev/mmcblk0boot1: 4 MB, 4194304 bytes
4 heads, 16 sectors/track, 128 cylinders, total 8192 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x01700172


Disk /dev/mmcblk0boot0: 4 MB, 4194304 bytes
4 heads, 16 sectors/track, 128 cylinders, total 8192 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x01700171


Disk /dev/sda: 4026 MB, 4026531840 bytes
256 heads, 63 sectors/track, 487 cylinders, total 7864320 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  4294967295  2147483647+  ee  GPT




=================== Default settings of Boot Repair
The default repair of the Boot-Repair utility would purge (in order to sign-grub) and reinstall the grub-efi-amd64-signed of mmcblk0p2, using the following options:        mmcblk0p1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file rename-ms-efi


=================== User settings
The settings chosen by the user will reinstall the grub-efi of mmcblk0p2, using the following options:        mmcblk0p1/boot/efi,
Additional repair will be performed: unhide-bootmenu-10s    use-standard-efi-file rename-ms-efi


rm /media/ubuntu/8E42-D5AF/efi/Microsoft/Boot/bootmgfw.efi /media/ubuntu/8E42-D5AF/efi/Microsoft/Boot/bootmgfw.efi.grb
rm /media/ubuntu/8E42-D5AF/efi/Microsoft/Boot/bootx64.efi /media/ubuntu/8E42-D5AF/efi/Microsoft/Boot/bootx64.efi.grb
rm /media/ubuntu/8E42-D5AF/efi/Boot/bootx64.efi /media/ubuntu/8E42-D5AF/efi/Boot/bootx64.efi.grb
Mount mmcblk0p1 on /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532/boot/efi
ls mmcblk0p1/efi: /ubuntu/shimx64.efi /ubuntu/MokManager.efi /ubuntu/grubx64.efi /ubuntu/grub.cfg /Microsoft/bootmgfw.efi /Microsoft/Boot

*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:22b1] (rev 21)
Subsystem: Acer Incorporated [ALI] Device [1025:100f]
Kernel driver in use: i915_bpo
00:0b.0 Signal processing controller [1180]: Intel Corporation Device [8086:22dc] (rev 21)
*******

grub-install --version
grub-install (GRUB) 2.02~beta2-9ubuntu1.3,grub-install (GRUB) 2.

chroot /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532 efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0003,0000
Boot0000* USB HDD: VerbatimStore n Go Drive	ACPI(a0341d0,0)PCI(14,0)USB(1,0)HD(1,800,77f7df,fae5c804-518a-4f6c-b083-58b5c51908ab)RC
Boot0003* ubuntu	HD(1,800,32000,fc73d5d8-9a27-4d8b-8fd9-c066d7ecaa1b)File(EFIubuntugrubx64.efi)
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

chroot /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532 uname -r
Kernel: 3.19.0-25-generic

Reinstall the grub-efi of mmcblk0p2
Installing for x86_64-efi platform.
Installation finished. No error reported.
grub-install --efi-directory=/boot/efi --target=x86_64-efi : exit code of grub-install :0
mv 25_custom
ls mmcblk0p1/efi: /ubuntu/shimx64.efi /ubuntu/MokManager.efi /ubuntu/grubx64.efi /ubuntu/grub.cfg /Microsoft/bootmgfw.efi /Microsoft/Boot
df /dev/mmcblk0p1
cp /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532/boot/efi/EFI/ubuntu/grubx64.efi /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi (& .grb)
df /dev/mmcblk0p1
cp /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532/boot/efi/EFI/ubuntu/grubx64.efi /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532/boot/efi/EFI/Microsoft/Boot/bootx64.efi (& .grb)
df /dev/mmcblk0p1
cp /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532/boot/efi/EFI/ubuntu/grubx64.efi /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532/boot/efi/EFI/Boot/bootx64.efi (& .grb)
ls mmcblk0p1/efi: /Microsoft/Boot/bootx64.efi.grb /Microsoft/Boot/bootx64.efi /Microsoft/Boot/bootmgfw.efi.grb /Microsoft/Boot/bootmgfw.efi /ubuntu/shimx64.efi /ubuntu/MokManager.efi /ubuntu/grubx64.efi /ubuntu/grub.cfg /Microsoft/bootmgfw.efi /Microsoft/Boot /Boot/bootx64.efi.grb /Boot/bootx64.efi
Add /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532/boot/efi efi entries in /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532/etc/grub.d/25_custom
Adding custom /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532/boot/efi/EFI/Microsoft/bootmgfw.efi
mmcblk0p1/bootmgfw.efi already added
Adding custom /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532/boot/efi/EFI/ubuntu/MokManager.efi

chroot /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532 efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0001,0000
Boot0000* USB HDD: VerbatimStore n Go Drive	ACPI(a0341d0,0)PCI(14,0)USB(1,0)HD(1,800,77f7df,fae5c804-518a-4f6c-b083-58b5c51908ab)RC
Boot0001* ubuntu	HD(1,800,32000,fc73d5d8-9a27-4d8b-8fd9-c066d7ecaa1b)File(EFIubuntugrubx64.efi)
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

chroot /media/ubuntu/6c9b290c-2ac3-4865-ac91-740cf7fd6532 update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.19.0-26-generic
Found initrd image: /boot/initrd.img-3.19.0-26-generic
Found linux image: /boot/vmlinuz-3.19.0-25-generic
Found initrd image: /boot/initrd.img-3.19.0-25-generic
Found linux image: /boot/vmlinuz-3.13.0-62-generic
Found initrd image: /boot/initrd.img-3.13.0-62-generic
Adding boot menu entry for EFI firmware configuration
Unhide GRUB boot menu in mmcblk0p2/boot/grub/grub.cfg

Boot successfully repaired.

You can now reboot your computer.

Dans ce Boot-Info de kirasole, on peut trouver (deux fois) cette ligne :

Warning: Error fsyncing/closing /dev/mmcblk0rpmb: Input/output error

Cette ligne, on le retrouve aussi (deux fois) dans ton Boot-Info du post #14 : c'est le fameux message que tu as cité dans ton post #11. Tout ça pour dire que ce warning n'est peut-être pas la cause d'un blocage de l'installation.
Ce qu'il y a d'encourageant dans le fil de kirasole, c'est qu'il indique qu'il a pu réussir à faire fonctionner son installation en utilisant les indications de cette page : http://askubuntu.com/questions/597213/b … 202#653202
En somme, il faut persévérer pour faire l'installation en mode EFI puisque c'est ce qui a été fait par kirasole

Dernière modification par malbo (Le 15/01/2016, à 10:09)

Corto Celtic · Le 15/01/2016, à 14:30

Bonjour,
On persévére, on persévérer....

je fait donc l'installation maintenant
en suivant les instructions de https://askubuntu.com/questions/597213/ … 8b5d119fad

Dernière modification par Corto Celtic (Le 17/01/2016, à 16:41)

Corto Celtic · Le 15/01/2016, à 15:55

Malbo....

CA MARCHE !!!!!!

J'ai modifié mon post N 10, dis moi si je n'ai rien oublier...
Merci encore de ton aide !

malbo · Le 15/01/2016, à 16:14

En vue de te répondre pour ta question sur ton post #10, je te prie de démarrer une session sur ton Ubuntu fraîchement installé et depuis cette session de faire un Boot-Info. Tu donneras l'URL de ce Boot-Info dans ta réponse.

Corto Celtic · Le 15/01/2016, à 17:16

Voilà Voilà

http://paste.ubuntu.com/14505205/

malbo · Le 15/01/2016, à 18:24

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 9Feb2015]


============================= Boot Info Summary: ===============================

 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20140113
    Boot sector info:  Syslinux looks at sector 10180960 of /dev/sda1 for 
                       its second stage. SYSLINUX is installed in the  
                       directory. No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 16.0 GB, 16008609792 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *             32    31,266,815    31,266,784   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/mmcblk0p1   5C83-088C                              vfat       
/dev/mmcblk0p2   15086c25-dd93-4bc5-a3ea-3b09b8242ff0   ext4       
/dev/mmcblk0p3   cc61e22c-586e-4d0f-93e7-fad6e1bfa118   swap       
/dev/sda1        A442-750D                              vfat       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root 13 Jan 15 16:14 mmc-HBG4e__0x866b3d63 -> ../../mmcblk0
lrwxrwxrwx 1 root root 15 Jan 15 15:57 mmc-HBG4e__0x866b3d63-part1 -> ../../mmcblk0p1
lrwxrwxrwx 1 root root 15 Jan 15 15:57 mmc-HBG4e__0x866b3d63-part2 -> ../../mmcblk0p2
lrwxrwxrwx 1 root root 15 Jan 15 15:57 mmc-HBG4e__0x866b3d63-part3 -> ../../mmcblk0p3
lrwxrwxrwx 1 root root  9 Jan 15 16:14 usb-SanDisk_Cruzer_Fit_4C530009070219116502-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 15 15:59 usb-SanDisk_Cruzer_Fit_4C530009070219116502-0:0-part1 -> ../../sda1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/mmcblk0p1   /boot/efi                vfat       (rw)
/dev/mmcblk0p2   /                        ext4       (rw,errors=remount-ro)
/dev/sda1        /media/corto/A442-750D vfat       (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sda1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100

label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --

label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit 

label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper  quiet splash --

label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity  quiet splash --

label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check  quiet splash --

label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit 

label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit 

label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --

label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --

label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --

label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --

--------------------------------------------------------------------------------

============== sda1: Version of COM32(R) files used by Syslinux: ===============

 menu.c32                           :  COM32R module (v4.xx)


ADDITIONAL INFORMATION :
=================== log of boot-info 2016-01-15__16h14 ===================
boot-info version : 4ppa35
boot-sav version : 4ppa35
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa35
boot-info is executed in installed-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.19.0-43-generic.efi.signed root=UUID=15086c25-dd93-4bc5-a3ea-3b09b8242ff0 ro quiet splash vt.handoff=7
cat: /sys/block/mmcblk0/mmcblk0boot0/start: Aucun fichier ou dossier de ce type
cat: /sys/block/mmcblk0/mmcblk0boot1/start: Aucun fichier ou dossier de ce type
cat: /sys/block/mmcblk0/mmcblk0rpmb/start: Aucun fichier ou dossier de ce type

WARNING: GPT (GUID Partition Table) detected on '/dev/mmcblk0'! The util fdisk doesn't support GPT. Use GNU Parted.

Disk /dev/mmcblk0boot1 doesn't contain a valid partition table
Disk /dev/mmcblk0boot0 doesn't contain a valid partition table

=================== os-prober:
/dev/mmcblk0p2:L'OS actuellement utilisÃ© - Ubuntu 14.04.3 LTS CurrentSession:linux

=================== blkid:
/dev/mmcblk0p1: UUID="5C83-088C" TYPE="vfat"
/dev/mmcblk0p2: UUID="15086c25-dd93-4bc5-a3ea-3b09b8242ff0" TYPE="ext4"
/dev/mmcblk0p3: UUID="cc61e22c-586e-4d0f-93e7-fad6e1bfa118" TYPE="swap"
/dev/sda1: UUID="A442-750D" TYPE="vfat"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


AttentionÂ : identifiant de table de partitions GPT (GUID) dÃ©tectÃ© sur Â«Â /dev/mmcblk0Â Â». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/mmcblk0'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root     4096 Jan 15 13:42 grub.d
total 76
-rwxr-xr-x 1 root root  9791 Dez 17 16:00 00_header
-rwxr-xr-x 1 root root  6058 Mai 13  2015 05_debian_theme
-rwxr-xr-x 1 root root 11608 Jun 26  2015 10_linux
-rwxr-xr-x 1 root root 10412 Jun 26  2015 20_linux_xen
-rwxr-xr-x 1 root root  1992 MÃ¤r 12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 26  2015 30_os-prober
-rwxr-xr-x 1 root root  1416 Jun 26  2015 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Jun 26  2015 40_custom
-rwxr-xr-x 1 root root   216 Jun 26  2015 41_custom
-rw-r--r-- 1 root root   483 Jun 26  2015 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of mmcblk0p2: UUID=5C83-088C   (mmcblk0p1)
=================== No kernel in /media/corto/A442-750D/boot:
grub



=================== efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,2001,2002,2003
Boot0000* Unknown Device: 	HD(1,800,100000,5f8fdb27-9486-4813-8f32-84dc21051a4f)File(EFIubuntushimx64.efi)RC
Boot0001* linux	ACPI(a0341d0,0)PCI(10,0)Controller(0)0311050000HD(1,800,100000,5f8fdb27-9486-4813-8f32-84dc21051a4f)File(EFIubuntushimx64.efi)A01 ..
Boot0002* Unknown Device: 	HD(1,800,100000,5f8fdb27-9486-4813-8f32-84dc21051a4f)File(EFIubuntushimx64.efi)RC
Boot0003* Unknown Device: 	RC...0
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.


=================== PARTITIONS & DISKS:
mmcblk0p2	: mmcblk0,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	.
mmcblk0p1	: mmcblk0,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/boot/efi.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-kernel,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/media/corto/A442-750D.

mmcblk0	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	1 sectors * 512 bytes
sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	liveusb,	no-os,	32 sectors * 512 bytes


=================== parted -l:

Model: SanDisk Cruzer Fit (scsi)
Disk /dev/sda: 16.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      16.4kB  16.0GB  16.0GB  primary  fat32        boot, lba


Error: /dev/mmcblk0rpmb: unrecognised disk label
Warning: Error fsyncing/closing /dev/mmcblk0rpmb: Input/output error

Error: /dev/mmcblk0boot0: unrecognised disk label

Error: /dev/mmcblk0boot1: unrecognised disk label

Model: MMC HBG4e (sd/mmc)
Disk /dev/mmcblk0: 31.3GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system     Name  Flags
1      1049kB  538MB   537MB   fat32                 boot
2      538MB   27.1GB  26.5GB  ext4
3      27.1GB  31.3GB  4204MB  linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:16.0GB:scsi:512:512:msdos:SanDisk Cruzer Fit;
1:16.4kB:16.0GB:16.0GB:fat32::boot, lba;

Error: /dev/mmcblk0rpmb: unrecognised disk label
Warning: Error fsyncing/closing /dev/mmcblk0rpmb: Input/output error

Error: /dev/mmcblk0boot0: unrecognised disk label

Error: /dev/mmcblk0boot1: unrecognised disk label

BYT;
/dev/mmcblk0:31.3GB:sd/mmc:512:512:gpt:MMC HBG4e;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:27.1GB:26.5GB:ext4::;
3:27.1GB:31.3GB:4204MB:linux-swap(v1)::;

=================== lsblk:
KNAME        TYPE FSTYPE   SIZE LABEL
sda          disk         14,9G
sda1         part vfat    14,9G
mmcblk0rpmb  disk            4M
mmcblk0boot0 disk            4M
mmcblk0boot1 disk            4M
mmcblk0      disk         29,1G
mmcblk0p1    part vfat     512M
mmcblk0p2    part ext4    24,7G
mmcblk0p3    part swap     3,9G

KNAME        ROTA RO RM STATE   MOUNTPOINT
sda             1  0  1 running
sda1            1  0  1         /media/corto/A442-750D
mmcblk0rpmb     0  0  0
mmcblk0boot0    0  1  0
mmcblk0boot1    0  1  0
mmcblk0         0  0  0
mmcblk0p1       0  0  0         /boot/efi
mmcblk0p2       0  0  0         /
mmcblk0p3       0  0  0         [SWAP]


=================== mount:
/dev/mmcblk0p2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/mmcblk0p1 on /boot/efi type vfat (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=corto)
/dev/sda1 on /media/corto/A442-750D type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)


=================== ls:
/sys/block/mmcblk0 (filtered):  alignment_offset bdi capability dev device discard_alignment ext_range force_ro holders inflight mmcblk0boot0 mmcblk0boot1 mmcblk0p1 mmcblk0p2 mmcblk0p3 mmcblk0rpmb power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/mmcblk0boot0 (filtered):  alignment_offset bdi capability dev device discard_alignment ext_range force_ro holders inflight power queue range removable ro ro_lock_until_next_power_on size slaves stat subsystem trace uevent
/sys/block/mmcblk0boot1 (filtered):  alignment_offset bdi capability dev device discard_alignment ext_range force_ro holders inflight power queue range removable ro ro_lock_until_next_power_on size slaves stat subsystem trace uevent
/sys/block/mmcblk0rpmb (filtered):  alignment_offset bdi capability dev device discard_alignment ext_range force_ro holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 input kmsg kvm log mapper mcelog media0 mei0 mem memory_bandwidth mmcblk0 mmcblk0boot0 mmcblk0boot1 mmcblk0p1 mmcblk0p2 mmcblk0p3 mmcblk0rpmb net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control
ls: impossible d'accÃ©der Ã  : Aucun fichier ou dossier de ce type

=================== hexdump -n512 -C /dev/mmcblk0p1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  10 00 04 00 00 08 00 00  |................|
00000020  00 00 10 00 fe 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 8c 08 83 5c 4e  4f 20 4e 41 4d 45 20 20  |..)...NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200
ls sda1/efi: /BOOT/grubx64.efi /BOOT/BOOTx64.EFI
ls sda1: autorun.inf
boot
casper
dists
EFI
install
isolinux
ldlinux.sys
md5sum.txt
menu.c32
photos
pics
pool
preseed
README.diskdefines
SanDiskSecureAccessV2.0
SanDiskSecureAccessV2_win.exe
syslinux.cfg
System Volume Information
ubnfilel.txt
ubninit
ubnkern
ubnpathl.txt
ubuntu-14.04.3-desktop-amd64.iso
wubi.exe  . Veuillez indiquer ce message Ã  boot.repair@gmail.com
ls /boot/efi/efi : ubuntu
Error efitmp. Veuillez indiquer ce message Ã  boot.repair@gmail.com

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 53 59 53 4c 49  4e 55 58 00 02 20 24 00  |.X.SYSLINUX.. $.|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 20 00 00 00  |........?... ...|
00000020  e0 17 dd 01 ce 1d 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 0d 75 42 a4 4e  4f 20 4e 41 4d 45 20 20  |..).uB.NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 fa fc 31 c9 8e d1  |  FAT32   ..1...|
00000060  bc 76 7b 52 06 57 1e 56  8e c1 b1 26 bf 78 7b f3  |.v{R.W.V...&.x{.|
00000070  a5 8e d9 bb 78 00 0f b4  37 0f a0 56 20 d2 78 1b  |....x...7..V .x.|
00000080  31 c0 b1 06 89 3f 89 47  02 f3 64 a5 8a 0e 18 7c  |1....?.G..d....||
00000090  88 4d f8 50 50 50 50 cd  13 eb 62 8b 55 aa 8b 75  |.M.PPPP...b.U..u|
000000a0  a8 c1 ee 04 01 f2 83 fa  4f 76 31 81 fa b2 07 73  |........Ov1....s|
000000b0  2b f6 45 b4 7f 75 25 38  4d b8 74 20 66 3d 21 47  |+.E..u%8M.t f=!G|
000000c0  50 54 75 10 80 7d b8 ed  75 0a 66 ff 75 ec 66 ff  |PTu..}..u.f.u.f.|
000000d0  75 e8 eb 0f 51 51 66 ff  75 bc eb 07 51 51 66 ff  |u...QQf.u...QQf.|
000000e0  36 1c 7c b4 08 e8 e9 00  72 13 20 e4 75 0f c1 ea  |6.|.....r. .u...|
000000f0  08 42 89 16 1a 7c 83 e1  3f 89 0e 18 7c fb bb aa  |.B...|..?...|...|
00000100  55 b4 41 e8 cb 00 72 10  81 fb 55 aa 75 0a f6 c1  |U.A...r...U.u...|
00000110  01 74 05 c6 06 46 7d 00  66 b8 60 59 9b 00 66 ba  |.t...F}.f.`Y..f.|
00000120  00 00 00 00 bb 00 80 e8  0e 00 66 81 3e 1c 80 99  |..........f.>...|
00000130  99 61 6c 75 74 e9 f8 02  66 03 06 60 7b 66 13 16  |.alut...f..`{f..|
00000140  64 7b b9 10 00 eb 2b 66  52 66 50 06 53 6a 01 6a  |d{....+fRfP.Sj.j|
00000150  10 89 e6 66 60 b4 42 e8  77 00 66 61 8d 64 10 72  |...f`.B.w.fa.d.r|
00000160  01 c3 66 60 31 c0 e8 68  00 66 61 e2 da c6 06 46  |..f`1..h.fa....F|
00000170  7d 2b 66 60 66 0f b7 36  18 7c 66 0f b7 3e 1a 7c  |}+f`f..6.|f..>.||
00000180  66 f7 f6 31 c9 87 ca 66  f7 f7 66 3d ff 03 00 00  |f..1...f..f=....|
00000190  77 17 c0 e4 06 41 08 e1  88 c5 88 d6 b8 01 02 e8  |w....A..........|
000001a0  2f 00 66 61 72 01 c3 e2  c9 31 f6 8e d6 bc 68 7b  |/.far....1....h{|
000001b0  8e de 66 8f 06 78 00 be  da 7d ac 20 c0 74 09 b4  |..f..x...}. .t..|
000001c0  0e bb 07 00 cd 10 eb f2  31 c0 cd 16 cd 19 f4 eb  |........1.......|
000001d0  fd 8a 16 74 7b 06 cd 13  07 c3 42 6f 6f 74 20 65  |...t{.....Boot e|
000001e0  72 72 6f 72 0d 0a 00 00  00 00 00 00 00 00 00 00  |rror............|
000001f0  00 00 00 00 00 00 00 00  fe 02 b2 3e 18 37 55 aa  |...........>.7U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/mmcblk0'! The util fdisk doesn't support GPT. Use GNU Parted.

Disk /dev/mmcblk0boot1 doesn't contain a valid partition table
Disk /dev/mmcblk0boot0 doesn't contain a valid partition table

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/mmcblk0p2 ext4       25G  5.2G   18G  23% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
udev           devtmpfs  1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs     387M  1.2M  386M   1% /run
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     1.9G  264K  1.9G   1% /run/shm
none           tmpfs     100M   36K  100M   1% /run/user
/dev/mmcblk0p1 vfat      511M  3.4M  508M   1% /boot/efi
/dev/sda1      vfat       15G  4.9G   11G  33% /media/corto/A442-750D

=================== fdisk -l:

Disk /dev/mmcblk0: 31.3 GB, 31272730624 bytes
255 heads, 63 sectors/track, 3802 cylinders, total 61079552 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1               1    61079551    30539775+  ee  GPT

Disk /dev/mmcblk0boot1: 4 MB, 4194304 bytes
4 heads, 16 sectors/track, 128 cylinders, total 8192 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x011b011d


Disk /dev/mmcblk0boot0: 4 MB, 4194304 bytes
4 heads, 16 sectors/track, 128 cylinders, total 8192 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x011b011c


Disk /dev/sda: 16.0 GB, 16008609792 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *          32    31266815    15633392    c  W95 FAT32 (LBA)




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of mmcblk0p2, using the following options:        mmcblk0p1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file rename-ms-efi


=================== Final advice in case of suggested repair
N'oubliez pas de rÃ©gler votre BIOS pour qu'il amorce sur le disque mmcblk0 (31.3GB)Â !


=================== User settings
The settings chosen by the user will not act on the boot.

C'est magnifique comme résultat.
A noter qu'on trouve encore deux fois dans ce dernier Boot-Info la ligne "Warning: Error fsyncing/closing /dev/mmcblk0rpmb: Input/output error" donc j'avais raison de supposer dans le post #15 que ce warning n'était pas bloquant.
A noter également que le Boot-Info n'affiche pas le contenu du fichier /boot/grub/grub.cfg du Ubuntu installé ni le contenu du fichier /etc/fstab. C'est ce qu'on peut observer aussi dans le Boot-Info de kirasole (post #15). En fait, Boot-Info est basé sur Boot Info Script qui n'est plus maintenu depuis 2012 donc je pense qu'on va devoir s'habituer à l'absence de ces fichiers dans le cas d'un Boot-Info réalisé sur une installation de Ubuntu sur mémoire flash eMMC.

A l'item 8 de ton post #10, je lis :

8 - Après avoir essayer Ubuntu en "live" et qu'il convient:
     Pour l’installation ajouter au chapitre 3 (dans le Bios):
     Mettre un mot de passe dans "Security: set supervisor password" (exemple: blablabla).
     Laisser le Boot en UEFI.
     Laisser le "Boot - SecureBoot" sur "enabled".

Là maintenant, je ne comprends pas pourquoi tu mentionnes qu'il faut mettre un mot de passe supervisor : on fait ça quand on veut changer des paramètres qui sont grisés (qu'on ne peut changer que si on crée un "supervisor password") mais si on prend le cas d'un novice qui suivrait ta procédure, il n'a rien besoin de changer puisque "de base" le paramètre "Boot Mode" est positionné sur UEFI et de base le paramètre "Secure Boot" est sur "Enabled". Je me trompe ?

Dernière modification par malbo (Le 16/01/2016, à 10:08)

Corto Celtic · Le 15/01/2016, à 18:47

Oui presque
Après l'installation il faut retourner dans le Bios pour signifier la présence de Ubuntu en mode secure de ce que j'ai compris.
Il faut enregistrer dans (pour) l'UEFI fichiers nouvellement installé (Ubuntu) comme dignes de confiance pour exécuter dans les options du BIOS sécurité.
Comme je le décris chapitre 10 de mon post #10 si non l'ordi démarre bien mais reste sur un écran noir.

Dernière modification par Corto Celtic (Le 17/01/2016, à 16:43)

Corto Celtic · Le 15/01/2016, à 18:49

Quand au message d'erreur pandent l'installation j'ai simplement cliqué sur ignorer.

malbo · Le 15/01/2016, à 19:07

Je crois que tu n'as pas compris ma remarque en fin du post #20 : je veux dire qu'à mon avis on n'a pas besoin de créer un mot de passe supervisor : que tu l'aies fait parce que tu as tâtonné pour installer, c'est compréhensible - d'autant que je t'ai donné des conseils pourris dans le post #14 - mais je pense qu'on peut tout faire sans créer un mot de passe supervisor. C'est peut-être dur pour toi de confirmer cela parce que tu manques d'expérience en installation en mode UEFI mais c'est mon point de vue.

Dernière modification par malbo (Le 15/01/2016, à 19:12)

malbo · Le 15/01/2016, à 19:30

Corto Celtic a écrit :

Je viens d'acheter cette petite machine (ES1 131 C8YK) plus une SD carte de 64G....

J'ai du mal avec cette référence que tu as indiquée dans le post #4 : j'ai trouvé cette page de Amazon sur le Acer Aspire ES1-131-C8YK qui indique "Windows 10 Home". J'ai trouvé également cette page de la fnac sur Acer aspire es1-131-c8yk qui n'indique même pas le système d'exploitation (est-ce à la fnac que tu as acheté ton ordi ?)
Tu as noté dans le post #1 : "Cette machine tourne sous Linpus". Confirmes-tu que ton ordi a été livré avec Linpus pré-installé ?

Dernière modification par malbo (Le 15/01/2016, à 19:34)

Corto Celtic · Le 15/01/2016, à 19:36

Manque d'expérience oui tu peux le dire mdr !
J' ai bêtement suivi la procédure de Kirasol comme tu me l'avait conseillé, et ça marche. Mais sans le mot de passe je n'avais pas accès aux commandes qui permettent d'indiquer "Ubuntu en mode secure " au système.
Désolé pour mon langage un peu charabia

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 12/01/2016, à 15:48

[RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#2 Le 12/01/2016, à 15:53

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#3 Le 13/01/2016, à 03:12

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#4 Le 13/01/2016, à 15:12

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#5 Le 13/01/2016, à 15:39

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#6 Le 13/01/2016, à 16:05

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#7 Le 13/01/2016, à 16:07

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#8 Le 13/01/2016, à 16:25

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#9 Le 13/01/2016, à 18:47

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#10 Le 13/01/2016, à 18:50

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#11 Le 14/01/2016, à 14:17

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#12 Le 14/01/2016, à 15:27

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#13 Le 14/01/2016, à 15:53

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#14 Le 14/01/2016, à 20:20

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#15 Le 15/01/2016, à 09:52

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#16 Le 15/01/2016, à 14:30

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#17 Le 15/01/2016, à 15:55

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#18 Le 15/01/2016, à 16:14

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#19 Le 15/01/2016, à 17:16

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#20 Le 15/01/2016, à 18:24

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#21 Le 15/01/2016, à 18:47

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#22 Le 15/01/2016, à 18:49

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#23 Le 15/01/2016, à 19:07

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#24 Le 15/01/2016, à 19:30

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

#25 Le 15/01/2016, à 19:36

Re : [RESOLU] Acer aspire ES1 131 xxxx et Ubuntu

Pied de page des forums