#1 Le 05/02/2016, à 19:51
- Hunkyu
Demarrage et rapport d'erreur[Résolu]
Bonjour,
Au démarrage Linux me met des erreurs, je n'ai pas le temps de voir ce qui est écrit et je ne peux pas non plus faire de screen de cela.
Lorsque j'ai indiqué mon mot de passe, 2 fenêtres apparaisse en me signalant que un problème a été rencontré et d'envoyer le rapport.
J'ai l'impression que ce soucis à commencer depuis que network-manager a été mise à jours.
Depuis que network manager a été mise à jours je n'ai également plus son applet, et ma connexion(filaire) démarre grâce à un script ayant été indiqué sur le forum pour la résolution du problème de network manager.
Je suis encore neohpyte en ubuntu donc je trouve pas quoi faire pour ne plus avoir ces message et et également faire afficher l'applet.
Je vous remercie par avance de l'aide que vous pouvez m'apporter ou des idée.
Dernière modification par Hunkyu (Le 21/02/2016, à 11:58)
Hors ligne
#2 Le 09/02/2016, à 14:53
- Croa
Re : Demarrage et rapport d'erreur[Résolu]
Tu fais un
dmesg|moredans une console
Ça te retournera le dernier déroulement de démarrage. (Comme ça ne rentre pas dans la page appuis sur « plus » jusqu'à arriver à l'invite $ )
Si t'as des DRDY ERR ça m'intéresse, j'ai le même problème ! 
Hors ligne
#3 Le 09/02/2016, à 21:02
- Hunkyu
Re : Demarrage et rapport d'erreur[Résolu]
Voila le retour que j'ai :
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 0.6 present.
[ 0.000000] DMI: MSI MS-7660/870A Fuzion (MS-7660), BIOS V10.1 07/07/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000138000000 aka 4992M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xc7f90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[ 0.000000] [mem 0x137e00000-0x137ffffff] page 2M
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x134000000-0x137dfffff]
[ 0.000000] [mem 0x134000000-0x137dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x133ffffff]
[ 0.000000] [mem 0x100000000-0x133ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc7f8ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc7dfffff] page 2M
[ 0.000000] [mem 0xc7e00000-0xc7f8ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x35b46000-0x36d9afff]
[ 0.000000] ACPI: RSDP 00000000000fb000 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7f90000 000040 (v01 7660MS A7660200 20100707 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7f90200 000084 (v01 7660MS A7660200 20100707 MSFT 00000097)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
[ 0.000000] ACPI: DSDT 00000000c7f905d0 0098B5 (v01 A7660 A7660200 00000200 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7f9e000 000040
[ 0.000000] ACPI: APIC 00000000c7f90390 00007C (v01 7660MS A7660200 20100707 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7f90410 00003C (v01 7660MS OEMMCFG 20100707 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7f9e040 000072 (v01 7660MS A7660200 20100707 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000c7f99e90 0000C8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000c7f99f60 000038 (v01 7660MS OEMHPET 20100707 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7f99fa0 000458 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xc7ffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x137ffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xc7ffffff] -> [mem 0x00000000-0xc7ffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xc7ffffff] + [mem 0x100000000-0x137ffffff] -> [mem 0x00000000-0x137ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x137ffffff]
[ 0.000000] NODE_DATA [mem 0x137ff9000-0x137ffdfff]
[ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133600000-ffff8801375fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x137ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xc7f8ffff]
[ 0.000000] node 0: [mem 0x100000000-0x137ffffff]
[ 0.000000] On node 0 totalpages: 1048365
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12735 pages used for memmap
[ 0.000000] DMA32 zone: 814992 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 229376 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e6000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7f90000-0xc7f9dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7f9e000-0xc7fdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7fe0000-0xc7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8000000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xc8000000-0xffbfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s81536 r8192 d20864 u262144
[ 0.000000] pcpu-alloc: s81536 r8192 d20864 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031961
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-78-generic root=UUID=ce6f5ed1-1f54-4df1-8168-423023679680 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ bc000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ bc000000
[ 0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
[ 0.000000] Memory: 3960268K/4193460K available (7402K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 233192K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-5.
[ 0.000000] NR_IRQS:16640 nr_irqs:728 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.012000] tsc: PIT calibration matches HPET. 2 loops
[ 0.012000] tsc: Detected 3207.427 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6414.85 BogoMIPS (lpj=12829708)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000030] Security Framework initialized
[ 0.000046] AppArmor: AppArmor initialized
[ 0.000047] Yama: becoming mindful.
[ 0.000290] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001425] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001939] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001944] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.002133] Initializing cgroup subsys memory
[ 0.002139] Initializing cgroup subsys devices
[ 0.002140] Initializing cgroup subsys freezer
[ 0.002142] Initializing cgroup subsys blkio
[ 0.002143] Initializing cgroup subsys perf_event
[ 0.002145] Initializing cgroup subsys hugetlb
[ 0.002161] tseg: 0000000000
[ 0.002167] CPU: Physical Processor ID: 0
[ 0.002168] CPU: Processor Core ID: 0
[ 0.002169] mce: CPU supports 6 MCE banks
[ 0.002174] LVT offset 0 assigned for vector 0xf9
[ 0.002178] process: using AMD E400 aware idle routine
[ 0.002180] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.002180] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.002180] tlb_flushall_shift: 4
[ 0.002265] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.002938] ACPI: Core revision 20131115
[ 0.005235] ACPI: All ACPI Tables successfully acquired
[ 0.012383] ftrace: allocating 28604 entries in 112 pages
[ 0.022684] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062649] smpboot: CPU0: AMD Phenom(tm) II X2 555 Processor (fam: 10, model: 04, stepping: 03)
[ 0.167217] Performance Events: AMD PMU driver.
[ 0.167220] ... version: 0
[ 0.167221] ... bit width: 48
[ 0.167222] ... generic registers: 4
[ 0.167223] ... value mask: 0000ffffffffffff
[ 0.167224] ... max period: 00007fffffffffff
[ 0.167224] ... fixed-purpose events: 0
[ 0.167225] ... event mask: 000000000000000f
[ 0.168559] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.168625] x86: Booting SMP configuration:
[ 0.168626] .... node #0, CPUs: #1
[ 0.182116] x86: Booted up 1 node, 2 CPUs
[ 0.182119] smpboot: Total of 2 processors activated (12829.70 BogoMIPS)
[ 0.182152] process: System has AMD C1E enabled
[ 0.182163] process: Switch to broadcast mode on CPU1
[ 0.184447] process: Switch to broadcast mode on CPU0
[ 0.184521] devtmpfs: initialized
[ 0.187482] EVM: security.selinux
[ 0.187483] EVM: security.SMACK64
[ 0.187484] EVM: security.ima
[ 0.187485] EVM: security.capability
[ 0.187535] PM: Registering ACPI NVS region [mem 0xc7f9e000-0xc7fdffff] (270336 bytes)
[ 0.188309] pinctrl core: initialized pinctrl subsystem
[ 0.188368] regulator-dummy: no parameters
[ 0.188393] RTC time: 19:40:31, date: 02/09/16
[ 0.188427] NET: Registered protocol family 16
[ 0.188508] cpuidle: using governor ladder
[ 0.188509] cpuidle: using governor menu
[ 0.188514] node 0 link 0: io port [1000, ffffff]
[ 0.188516] TOM: 00000000c8000000 aka 3200M
[ 0.188518] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.188521] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.188523] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.188524] node 0 link 0: mmio [a0000, bffff]
[ 0.188526] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.188527] TOM2: 0000000138000000 aka 4992M
[ 0.188528] bus: [bus 00-07] on node 0 link 0
[ 0.188530] bus: 00 [io 0x0000-0xffff]
[ 0.188531] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.188532] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.188533] bus: 00 [mem 0xc8000000-0xdfffffff]
[ 0.188533] bus: 00 [mem 0x138000000-0xfcffffffff]
[ 0.188570] ACPI: bus type PCI registered
[ 0.188571] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.188615] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.188617] PCI: not using MMCONFIG
[ 0.188618] PCI: Using configuration type 1 for base access
[ 0.188619] PCI: Using configuration type 1 for extended access
[ 0.188714] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.188715] mtrr: probably your BIOS does not setup all CPUs.
[ 0.188716] mtrr: corrected configuration.
[ 0.189346] bio: create slab <bio-0> at 0
[ 0.189484] ACPI: Added _OSI(Module Device)
[ 0.189486] ACPI: Added _OSI(Processor Device)
[ 0.189487] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.189487] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.190750] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.192700] ACPI: Interpreter enabled
[ 0.192709] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.192712] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
[ 0.192721] ACPI: (supports S0 S1 S4 S5)
[ 0.192722] ACPI: Using IOAPIC for interrupt routing
[ 0.192740] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.193164] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.200779] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.200849] ACPI: No dock devices found.
[ 0.235059] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.235065] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.235068] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.235290] PCI host bridge to bus 0000:00
[ 0.235292] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.235294] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.235295] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.235297] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.235298] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.235300] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff]
[ 0.235301] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.235311] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[ 0.235396] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.235430] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.235462] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.235487] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400
[ 0.235519] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.235549] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.235570] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
[ 0.235603] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.235634] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.235660] pci 0000:00:09.0: [1002:597e] type 01 class 0x060400
[ 0.235693] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.235722] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.235743] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[ 0.235776] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.235805] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.235840] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.235859] pci 0000:00:11.0: reg 0x10: [io 0x9000-0x9007]
[ 0.235869] pci 0000:00:11.0: reg 0x14: [io 0x8000-0x8003]
[ 0.235878] pci 0000:00:11.0: reg 0x18: [io 0x7000-0x7007]
[ 0.235887] pci 0000:00:11.0: reg 0x1c: [io 0x6000-0x6003]
[ 0.235896] pci 0000:00:11.0: reg 0x20: [io 0x5000-0x500f]
[ 0.235906] pci 0000:00:11.0: reg 0x24: [mem 0xfcdffc00-0xfcdfffff]
[ 0.235926] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.236005] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.236019] pci 0000:00:12.0: reg 0x10: [mem 0xfcdfe000-0xfcdfefff]
[ 0.236100] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.236121] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.236134] pci 0000:00:12.1: reg 0x10: [mem 0xfcdfd000-0xfcdfdfff]
[ 0.236215] pci 0000:00:12.1: System wakeup disabled by ACPI
[ 0.236242] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.236261] pci 0000:00:12.2: reg 0x10: [mem 0xfcdff800-0xfcdff8ff]
[ 0.236346] pci 0000:00:12.2: supports D1 D2
[ 0.236347] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.236379] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.236408] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.236421] pci 0000:00:13.0: reg 0x10: [mem 0xfcdfc000-0xfcdfcfff]
[ 0.236502] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.236524] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.236537] pci 0000:00:13.1: reg 0x10: [mem 0xfcdfb000-0xfcdfbfff]
[ 0.236618] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.236645] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.236664] pci 0000:00:13.2: reg 0x10: [mem 0xfcdff400-0xfcdff4ff]
[ 0.236749] pci 0000:00:13.2: supports D1 D2
[ 0.236750] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.236782] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.236812] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.236947] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.236963] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.236973] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.236982] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.236991] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.237000] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.237091] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.237112] pci 0000:00:14.2: reg 0x10: [mem 0xfcdf4000-0xfcdf7fff 64bit]
[ 0.237180] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.237210] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.237232] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.237341] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.237399] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.237420] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.237433] pci 0000:00:14.5: reg 0x10: [mem 0xfcdfa000-0xfcdfafff]
[ 0.237517] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.237542] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.237592] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.237636] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.237682] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.237731] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.237821] pci 0000:01:00.0: [1fc8:0920] type 01 class 0x060400
[ 0.237833] pci 0000:01:00.0: reg 0x10: [mem 0xfce00000-0xfcffffff 64bit]
[ 0.237868] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.242158] pci 0000:00:02.0: PCI bridge to [bus 01-05]
[ 0.242163] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 0.242165] pci 0000:00:02.0: bridge window [mem 0xfce00000-0xfe8fffff]
[ 0.242169] pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.242221] pci 0000:02:08.0: [1fc8:0820] type 01 class 0x060400
[ 0.242270] pci 0000:02:08.0: PME# supported from D0 D3hot
[ 0.242309] pci 0000:02:09.0: [1fc8:08a0] type 01 class 0x060400
[ 0.242353] pci 0000:02:09.0: PME# supported from D0 D3hot
[ 0.242389] pci 0000:02:0a.0: [1fc8:0960] type 01 class 0x060400
[ 0.242437] pci 0000:02:0a.0: PME# supported from D0 D3hot
[ 0.242480] pci 0000:01:00.0: PCI bridge to [bus 02-05]
[ 0.242484] pci 0000:01:00.0: bridge window [io 0xa000-0xafff]
[ 0.242487] pci 0000:01:00.0: bridge window [mem 0xfd000000-0xfe8fffff]
[ 0.242492] pci 0000:01:00.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.242536] pci 0000:03:00.0: [10de:1401] type 00 class 0x030000
[ 0.242551] pci 0000:03:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.242566] pci 0000:03:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.242581] pci 0000:03:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.242591] pci 0000:03:00.0: reg 0x24: [io 0xa800-0xa87f]
[ 0.242602] pci 0000:03:00.0: reg 0x30: [mem 0xfe580000-0xfe5fffff pref]
[ 0.242697] pci 0000:03:00.1: [10de:0fba] type 00 class 0x040300
[ 0.242711] pci 0000:03:00.1: reg 0x10: [mem 0xfe57c000-0xfe57ffff]
[ 0.250159] pci 0000:02:08.0: PCI bridge to [bus 03]
[ 0.250166] pci 0000:02:08.0: bridge window [io 0xa000-0xafff]
[ 0.250169] pci 0000:02:08.0: bridge window [mem 0xfd000000-0xfe5fffff]
[ 0.250174] pci 0000:02:08.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.250214] pci 0000:02:09.0: PCI bridge to [bus 04]
[ 0.250264] pci 0000:05:00.0: [1fc8:0be0] type 00 class 0xff0000
[ 0.250278] pci 0000:05:00.0: reg 0x10: [mem 0xfe800000-0xfe8fffff 64bit]
[ 0.250288] pci 0000:05:00.0: reg 0x18: [mem 0xfe600000-0xfe7fffff 64bit]
[ 0.250373] pci 0000:02:0a.0: PCI bridge to [bus 05]
[ 0.250379] pci 0000:02:0a.0: bridge window [mem 0xfe600000-0xfe8fffff]
[ 0.250443] pci 0000:06:00.0: [1b4b:91a3] type 00 class 0x01018f
[ 0.250457] pci 0000:06:00.0: reg 0x10: [io 0xc800-0xc807]
[ 0.250468] pci 0000:06:00.0: reg 0x14: [io 0xc400-0xc403]
[ 0.250478] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc007]
[ 0.250488] pci 0000:06:00.0: reg 0x1c: [io 0xb800-0xb803]
[ 0.250498] pci 0000:06:00.0: reg 0x20: [io 0xb400-0xb40f]
[ 0.250509] pci 0000:06:00.0: reg 0x24: [mem 0xfe9ff800-0xfe9fffff]
[ 0.250519] pci 0000:06:00.0: reg 0x30: [mem 0xfe9e0000-0xfe9effff pref]
[ 0.250569] pci 0000:06:00.0: PME# supported from D3hot
[ 0.258150] pci 0000:00:06.0: PCI bridge to [bus 06]
[ 0.258155] pci 0000:00:06.0: bridge window [io 0xb000-0xcfff]
[ 0.258157] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.258221] pci 0000:07:00.0: [1106:3403] type 00 class 0x0c0010
[ 0.258252] pci 0000:07:00.0: reg 0x10: [mem 0xfeafb800-0xfeafbfff 64bit]
[ 0.258267] pci 0000:07:00.0: reg 0x18: [io 0xd800-0xd8ff]
[ 0.258396] pci 0000:07:00.0: supports D2
[ 0.258397] pci 0000:07:00.0: PME# supported from D2 D3hot D3cold
[ 0.266145] pci 0000:00:07.0: PCI bridge to [bus 07]
[ 0.266150] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.266152] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.266202] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
[ 0.266216] pci 0000:08:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.266236] pci 0000:08:00.0: reg 0x18: [mem 0xfbfff000-0xfbffffff 64bit pref]
[ 0.266249] pci 0000:08:00.0: reg 0x20: [mem 0xfbff8000-0xfbffbfff 64bit pref]
[ 0.266304] pci 0000:08:00.0: supports D1 D2
[ 0.266306] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274134] pci 0000:00:09.0: PCI bridge to [bus 08]
[ 0.274138] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
[ 0.274142] pci 0000:00:09.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
[ 0.274196] pci 0000:09:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.274211] pci 0000:09:00.0: reg 0x10: [mem 0xfebfe000-0xfebfffff 64bit]
[ 0.274285] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.282129] pci 0000:00:0a.0: PCI bridge to [bus 09]
[ 0.282134] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.282213] pci 0000:00:14.4: PCI bridge to [bus 0a] (subtractive decode)
[ 0.282222] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.282223] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.282225] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.282226] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.282227] pci 0000:00:14.4: bridge window [mem 0xc8000000-0xdfffffff] (subtractive decode)
[ 0.282229] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.298175] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
[ 0.298209] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 12 14 15)
[ 0.298240] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.298269] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.298299] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.298329] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.298359] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
[ 0.298388] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.298496] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.298521] Found 1 acpi root devices
[ 0.298952] vgaarb: setting as boot device: PCI:0000:03:00.0
[ 0.298953] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.298955] vgaarb: loaded
[ 0.298956] vgaarb: bridge control possible 0000:03:00.0
[ 0.299084] SCSI subsystem initialized
[ 0.299128] libata version 3.00 loaded.
[ 0.299148] ACPI: bus type USB registered
[ 0.299161] usbcore: registered new interface driver usbfs
[ 0.299166] usbcore: registered new interface driver hub
[ 0.299194] usbcore: registered new device driver usb
[ 0.299273] PCI: Using ACPI for IRQ routing
[ 0.308370] PCI: pci_cache_line_size set to 64 bytes
[ 0.308446] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
[ 0.308448] e820: reserve RAM buffer [mem 0xc7f90000-0xc7ffffff]
[ 0.308511] NetLabel: Initializing
[ 0.308512] NetLabel: domain hash size = 128
[ 0.308512] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.308522] NetLabel: unlabeled traffic allowed by default
[ 0.308579] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.308582] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.310625] Switched to clocksource hpet
[ 0.314295] AppArmor: AppArmor Filesystem Enabled
[ 0.314318] pnp: PnP ACPI init
[ 0.314327] ACPI: bus type PNP registered
[ 0.314362] pnp 00:00: [dma 4]
[ 0.314382] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.314408] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.314424] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.314443] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.314933] pnp 00:04: [dma 0 disabled]
[ 0.314973] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.315001] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.315082] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.315084] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.315086] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.315239] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.315241] system 00:07: [io 0x040b] has been reserved
[ 0.315242] system 00:07: [io 0x04d6] has been reserved
[ 0.315244] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.315245] system 00:07: [io 0x0c14] has been reserved
[ 0.315247] system 00:07: [io 0x0c50-0x0c51] has been reserved
[ 0.315249] system 00:07: [io 0x0c52] has been reserved
[ 0.315250] system 00:07: [io 0x0c6c] has been reserved
[ 0.315252] system 00:07: [io 0x0c6f] has been reserved
[ 0.315253] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
[ 0.315255] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
[ 0.315256] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
[ 0.315258] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.315260] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
[ 0.315261] system 00:07: [io 0x0800-0x089f] could not be reserved
[ 0.315263] system 00:07: [io 0x0b00-0x0b0f] has been reserved
[ 0.315264] system 00:07: [io 0x0b20-0x0b3f] has been reserved
[ 0.315266] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.315268] system 00:07: [io 0x0910-0x091f] has been reserved
[ 0.315269] system 00:07: [io 0xfe00-0xfefe] has been reserved
[ 0.315271] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.315273] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.315275] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.315367] system 00:08: [io 0x0600-0x06df] has been reserved
[ 0.315369] system 00:08: [io 0x0ae0-0x0aef] has been reserved
[ 0.315371] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.315417] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.315419] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.331005] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.331008] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.331010] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.331012] system 00:0a: [mem 0x00100000-0xc7ffffff] could not be reserved
[ 0.331013] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.331016] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.331083] pnp: PnP ACPI: found 11 devices
[ 0.331084] ACPI: bus type PNP unregistered
[ 0.337635] pci 0000:02:08.0: PCI bridge to [bus 03]
[ 0.337638] pci 0000:02:08.0: bridge window [io 0xa000-0xafff]
[ 0.337642] pci 0000:02:08.0: bridge window [mem 0xfd000000-0xfe5fffff]
[ 0.337646] pci 0000:02:08.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.337650] pci 0000:02:09.0: PCI bridge to [bus 04]
[ 0.337659] pci 0000:02:0a.0: PCI bridge to [bus 05]
[ 0.337663] pci 0000:02:0a.0: bridge window [mem 0xfe600000-0xfe8fffff]
[ 0.337669] pci 0000:01:00.0: PCI bridge to [bus 02-05]
[ 0.337671] pci 0000:01:00.0: bridge window [io 0xa000-0xafff]
[ 0.337675] pci 0000:01:00.0: bridge window [mem 0xfd000000-0xfe8fffff]
[ 0.337678] pci 0000:01:00.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.337683] pci 0000:00:02.0: PCI bridge to [bus 01-05]
[ 0.337685] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 0.337687] pci 0000:00:02.0: bridge window [mem 0xfce00000-0xfe8fffff]
[ 0.337689] pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.337692] pci 0000:00:06.0: PCI bridge to [bus 06]
[ 0.337694] pci 0000:00:06.0: bridge window [io 0xb000-0xcfff]
[ 0.337696] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.337700] pci 0000:00:07.0: PCI bridge to [bus 07]
[ 0.337702] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.337704] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.337708] pci 0000:00:09.0: PCI bridge to [bus 08]
[ 0.337709] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
[ 0.337713] pci 0000:00:09.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
[ 0.337716] pci 0000:00:0a.0: PCI bridge to [bus 09]
[ 0.337718] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.337722] pci 0000:00:14.4: PCI bridge to [bus 0a]
[ 0.337734] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.337735] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.337737] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.337738] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.337739] pci_bus 0000:00: resource 8 [mem 0xc8000000-0xdfffffff]
[ 0.337741] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.337742] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.337744] pci_bus 0000:01: resource 1 [mem 0xfce00000-0xfe8fffff]
[ 0.337745] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.337747] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.337748] pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfe8fffff]
[ 0.337750] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.337751] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 0.337753] pci_bus 0000:03: resource 1 [mem 0xfd000000-0xfe5fffff]
[ 0.337754] pci_bus 0000:03: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.337756] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe8fffff]
[ 0.337757] pci_bus 0000:06: resource 0 [io 0xb000-0xcfff]
[ 0.337759] pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.337760] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
[ 0.337762] pci_bus 0000:07: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.337763] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 0.337764] pci_bus 0000:08: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref]
[ 0.337766] pci_bus 0000:09: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.337768] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.337769] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.337771] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.337772] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.337773] pci_bus 0000:0a: resource 8 [mem 0xc8000000-0xdfffffff]
[ 0.337775] pci_bus 0000:0a: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.337799] NET: Registered protocol family 2
[ 0.337974] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.338061] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.338184] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.338218] TCP: reno registered
[ 0.338224] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.338247] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.338313] NET: Registered protocol family 1
[ 0.738501] pci 0000:03:00.0: Video device with shadowed ROM
[ 0.738631] PCI: CLS 64 bytes, default 64
[ 0.738677] Trying to unpack rootfs image as initramfs...
[ 0.987711] Freeing initrd memory: 18772K (ffff880035b46000 - ffff880036d9b000)
[ 0.988041] PCI-DMA: Disabling AGP.
[ 0.988106] PCI-DMA: aperture base @ bc000000 size 65536 KB
[ 0.988107] PCI-DMA: using GART IOMMU.
[ 0.988109] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.992608] LVT offset 1 assigned for vector 0x400
[ 0.992617] IBS: LVT offset 1 assigned
[ 0.992637] perf: AMD IBS detected (0x0000001f)
[ 0.992672] microcode: CPU0: patch_level=0x010000b6
[ 0.992679] microcode: CPU1: patch_level=0x010000b6
[ 0.992736] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.992738] Scanning for low memory corruption every 60 seconds
[ 0.992914] Initialise system trusted keyring
[ 0.992950] audit: initializing netlink socket (disabled)
[ 0.992961] type=2000 audit(1455046830.892:1): initialized
[ 1.015658] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.016625] zbud: loaded
[ 1.016773] VFS: Disk quotas dquot_6.5.2
[ 1.016809] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.017203] fuse init (API version 7.22)
[ 1.017282] msgmni has been set to 7900
[ 1.017331] Key type big_key registered
[ 1.017800] Key type asymmetric registered
[ 1.017801] Asymmetric key parser 'x509' registered
[ 1.017824] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.017857] io scheduler noop registered
[ 1.017859] io scheduler deadline registered (default)
[ 1.017877] io scheduler cfq registered
[ 1.018057] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.018181] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 1.018285] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 1.018386] pcieport 0000:00:09.0: irq 43 for MSI/MSI-X
[ 1.018422] pcieport 0000:00:0a.0: irq 44 for MSI/MSI-X
[ 1.018572] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.018582] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.018617] ipmi message handler version 39.2
[ 1.018662] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.018667] ACPI: Power Button [PWRB]
[ 1.018690] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.018691] ACPI: Power Button [PWRF]
[ 1.018735] ACPI: processor limited to max C-state 1
[ 1.018809] GHES: HEST is not enabled!
[ 1.018893] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.039339] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.040562] Linux agpgart interface v0.103
[ 1.041670] brd: module loaded
[ 1.042269] loop: module loaded
[ 1.042535] libphy: Fixed MDIO Bus: probed
[ 1.042594] tun: Universal TUN/TAP device driver, 1.6
[ 1.042595] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.042632] PPP generic driver version 2.4.2
[ 1.042669] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.042672] ehci-pci: EHCI PCI platform driver
[ 1.042776] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.042781] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.042784] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.042795] ehci-pci 0000:00:12.2: debug port 1
[ 1.042833] ehci-pci 0000:00:12.2: irq 17, io mem 0xfcdff800
[ 1.054091] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.054134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.054136] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.054137] usb usb1: Product: EHCI Host Controller
[ 1.054138] usb usb1: Manufacturer: Linux 3.13.0-78-generic ehci_hcd
[ 1.054140] usb usb1: SerialNumber: 0000:00:12.2
[ 1.054222] hub 1-0:1.0: USB hub found
[ 1.054226] hub 1-0:1.0: 6 ports detected
[ 1.054402] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.054406] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.054409] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.054420] ehci-pci 0000:00:13.2: debug port 1
[ 1.054453] ehci-pci 0000:00:13.2: irq 19, io mem 0xfcdff400
[ 1.066077] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.066106] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.066108] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.066109] usb usb2: Product: EHCI Host Controller
[ 1.066110] usb usb2: Manufacturer: Linux 3.13.0-78-generic ehci_hcd
[ 1.066112] usb usb2: SerialNumber: 0000:00:13.2
[ 1.066192] hub 2-0:1.0: USB hub found
[ 1.066196] hub 2-0:1.0: 6 ports detected
[ 1.066284] ehci-platform: EHCI generic platform driver
[ 1.066290] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.066291] ohci-pci: OHCI PCI platform driver
[ 1.066379] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.066383] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.066402] ohci-pci 0000:00:12.0: irq 16, io mem 0xfcdfe000
[ 1.126031] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.126033] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.126034] usb usb3: Product: OHCI PCI host controller
[ 1.126036] usb usb3: Manufacturer: Linux 3.13.0-78-generic ohci_hcd
[ 1.126037] usb usb3: SerialNumber: 0000:00:12.0
[ 1.126126] hub 3-0:1.0: USB hub found
[ 1.126132] hub 3-0:1.0: 3 ports detected
[ 1.126272] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.126276] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.126287] ohci-pci 0000:00:12.1: irq 16, io mem 0xfcdfd000
[ 1.185985] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.185987] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.185989] usb usb4: Product: OHCI PCI host controller
[ 1.185990] usb usb4: Manufacturer: Linux 3.13.0-78-generic ohci_hcd
[ 1.185991] usb usb4: SerialNumber: 0000:00:12.1
[ 1.186080] hub 4-0:1.0: USB hub found
[ 1.186087] hub 4-0:1.0: 3 ports detected
[ 1.186221] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.186225] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.186243] ohci-pci 0000:00:13.0: irq 18, io mem 0xfcdfc000
[ 1.245940] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.245942] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.245944] usb usb5: Product: OHCI PCI host controller
[ 1.245945] usb usb5: Manufacturer: Linux 3.13.0-78-generic ohci_hcd
[ 1.245946] usb usb5: SerialNumber: 0000:00:13.0
[ 1.246034] hub 5-0:1.0: USB hub found
[ 1.246040] hub 5-0:1.0: 3 ports detected
[ 1.246172] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.246176] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.246189] ohci-pci 0000:00:13.1: irq 18, io mem 0xfcdfb000
[ 1.305893] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.305896] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.305897] usb usb6: Product: OHCI PCI host controller
[ 1.305898] usb usb6: Manufacturer: Linux 3.13.0-78-generic ohci_hcd
[ 1.305899] usb usb6: SerialNumber: 0000:00:13.1
[ 1.305985] hub 6-0:1.0: USB hub found
[ 1.305992] hub 6-0:1.0: 3 ports detected
[ 1.306129] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.306132] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.306144] ohci-pci 0000:00:14.5: irq 18, io mem 0xfcdfa000
[ 1.365842] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.365844] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.365845] usb usb7: Product: OHCI PCI host controller
[ 1.365846] usb usb7: Manufacturer: Linux 3.13.0-78-generic ohci_hcd
[ 1.365847] usb usb7: SerialNumber: 0000:00:14.5
[ 1.365946] hub 7-0:1.0: USB hub found
[ 1.365954] hub 7-0:1.0: 2 ports detected
[ 1.366006] ohci-platform: OHCI generic platform driver
[ 1.366012] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.366068] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 1.366072] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 8
[ 1.366201] xhci_hcd 0000:09:00.0: irq 45 for MSI/MSI-X
[ 1.366206] xhci_hcd 0000:09:00.0: irq 46 for MSI/MSI-X
[ 1.366211] xhci_hcd 0000:09:00.0: irq 47 for MSI/MSI-X
[ 1.366272] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.366274] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.366275] usb usb8: Product: xHCI Host Controller
[ 1.366276] usb usb8: Manufacturer: Linux 3.13.0-78-generic xhci_hcd
[ 1.366277] usb usb8: SerialNumber: 0000:09:00.0
[ 1.366354] hub 8-0:1.0: USB hub found
[ 1.366361] hub 8-0:1.0: 2 ports detected
[ 1.366415] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 1.366418] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 9
[ 1.369550] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.369551] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.369553] usb usb9: Product: xHCI Host Controller
[ 1.369554] usb usb9: Manufacturer: Linux 3.13.0-78-generic xhci_hcd
[ 1.369555] usb usb9: SerialNumber: 0000:09:00.0
[ 1.369639] hub 9-0:1.0: USB hub found
[ 1.369647] hub 9-0:1.0: 2 ports detected
[ 1.381886] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.382243] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.382248] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.382330] mousedev: PS/2 mouse device common for all mice
[ 1.382432] rtc_cmos 00:01: RTC can wake from S4
[ 1.382536] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.382559] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.382605] device-mapper: uevent: version 1.0.3
[ 1.382652] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.382657] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.382724] TCP: cubic registered
[ 1.382775] NET: Registered protocol family 10
[ 1.382886] NET: Registered protocol family 17
[ 1.382892] Key type dns_resolver registered
[ 1.383087] Loading compiled-in X.509 certificates
[ 1.383935] Loaded X.509 cert 'Magrathea: Glacier signing key: 4c7b7d758d4e3afcfca75f2d1eaa99d445446811'
[ 1.383943] registered taskstats version 1
[ 1.385690] Key type trusted registered
[ 1.388522] Key type encrypted registered
[ 1.388525] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.388527] IMA: No TPM chip found, activating TPM-bypass!
[ 1.388853] regulator-dummy: disabling
[ 1.388897] Magic number: 4:798:697
[ 1.388975] rtc_cmos 00:01: setting system clock to 2016-02-09 19:40:32 UTC (1455046832)
[ 1.389042] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.389084] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.389085] EDD information not available.
[ 1.389102] PM: Hibernation image not present or could not be loaded.
[ 1.390299] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.390301] Write protecting the kernel read-only data: 12288k
[ 1.390632] Freeing unused kernel memory: 780K (ffff88000173d000 - ffff880001800000)
[ 1.392137] Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
[ 1.401195] systemd-udevd[106]: starting version 204
[ 1.412571] ahci 0000:00:11.0: version 3.0
[ 1.412763] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.412766] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.415807] scsi0 : ahci
[ 1.415958] scsi1 : ahci
[ 1.415998] scsi2 : ahci
[ 1.416034] scsi3 : ahci
[ 1.416061] ata1: SATA max UDMA/133 abar m1024@0xfcdffc00 port 0xfcdffd00 irq 22
[ 1.416063] ata2: SATA max UDMA/133 abar m1024@0xfcdffc00 port 0xfcdffd80 irq 22
[ 1.416065] ata3: SATA max UDMA/133 abar m1024@0xfcdffc00 port 0xfcdffe00 irq 22
[ 1.416067] ata4: SATA max UDMA/133 abar m1024@0xfcdffc00 port 0xfcdffe80 irq 22
[ 1.416180] ahci 0000:06:00.0: irq 48 for MSI/MSI-X
[ 1.416196] ahci 0000:06:00.0: controller can do FBS, turning on CAP_FBS
[ 1.430599] ahci 0000:06:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl IDE mode
[ 1.430603] ahci 0000:06:00.0: flags: 64bit ncq fbs pio
[ 1.433167] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.433174] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.433345] r8169 0000:08:00.0: irq 49 for MSI/MSI-X
[ 1.433462] r8169 0000:08:00.0 eth0: RTL8168e/8111e at 0xffffc9000065a000, 6c:62:6d:5e:41:cc, XID 0c200000 IRQ 49
[ 1.433464] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.433497] scsi5 : pata_atiixp
[ 1.433548] scsi4 : ahci
[ 1.433698] scsi7 : ahci
[ 1.433756] scsi8 : ahci
[ 1.433771] scsi6 : pata_atiixp
[ 1.433800] scsi9 : ahci
[ 1.433816] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.433818] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.434739] scsi10 : ahci
[ 1.436236] scsi11 : ahci
[ 1.437839] scsi12 : ahci
[ 1.437982] scsi13 : ahci
[ 1.438013] ata7: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ff900 irq 48
[ 1.438016] ata8: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ff980 irq 48
[ 1.438018] ata9: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ffa00 irq 48
[ 1.438020] ata10: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ffa80 irq 48
[ 1.438023] ata11: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ffb00 irq 48
[ 1.438025] ata12: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ffb80 irq 48
[ 1.438027] ata13: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ffc00 irq 48
[ 1.438030] ata14: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ffc80 irq 48
[ 1.497783] firewire_ohci 0000:07:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.601448] ata6.00: ATAPI: ASUS DRW-1814BLT, 1.04, max UDMA/66
[ 1.613972] ata6.00: configured for UDMA/66
[ 1.733568] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.737566] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.741585] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.741617] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.742206] scsi 6:0:0:0: CD-ROM ASUS DRW-1814BLT 1.04 PQ: 0 ANSI: 5
[ 1.744590] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.744592] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.744680] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 1.744812] sr 6:0:0:0: Attached scsi generic sg0 type 5
[ 1.765545] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.765572] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.769550] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.773549] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.777537] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.777566] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.777594] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.874986] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.875097] ata14.00: configured for UDMA/66
[ 1.875674] ata7.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133
[ 1.875675] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.876473] ata7.00: configured for UDMA/133
[ 1.876574] scsi 4:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5
[ 1.876684] sd 4:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.876686] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 1.876719] sd 4:0:0:0: [sda] Write Protect is off
[ 1.876721] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.876736] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.876882] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 1.885443] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.889431] usb 1-6: new high-speed USB device number 4 using ehci-pci
[ 1.897423] ata8.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.897426] ata8.00: ATA-9: Samsung SSD 840 PRO Series, DXM04B0Q, max UDMA/133
[ 1.897427] ata8.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.903657] sda: sda1
[ 1.903818] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.905427] ata8.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.905513] ata8.00: configured for UDMA/133
[ 1.917487] scsi 7:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
[ 1.917587] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 1.917637] sd 7:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.917700] sd 7:0:0:0: [sdb] Write Protect is off
[ 1.917702] sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.917717] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.917740] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.917824] scsi 13:0:0:0: Attached scsi generic sg3 type 3
[ 1.918404] sdb: sdb1 sdb2 sdb3 sdb4
[ 1.918703] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 1.949746] EXT4-fs (sdb4): INFO: recovery required on readonly filesystem
[ 1.949749] EXT4-fs (sdb4): write access will be enabled during recovery
[ 1.972230] EXT4-fs (sdb4): orphan cleanup on readonly fs
[ 1.972372] EXT4-fs (sdb4): 12 orphan inodes deleted
[ 1.972373] EXT4-fs (sdb4): recovery complete
[ 1.986483] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[ 1.989686] tsc: Refined TSC clocksource calibration: 3207.516 MHz
[ 2.001376] firewire_core 0000:07:00.0: created device fw0: GUID 0010dc0001b6defd, S400
[ 2.161450] usb 1-6: New USB device found, idVendor=046d, idProduct=0804
[ 2.161453] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 2.161454] usb 1-6: SerialNumber: 3E4C8160
[ 2.225660] random: init urandom read with 77 bits of entropy available
[ 2.246099] init: plymouth-upstart-bridge main process (191) terminated with status 1
[ 2.246108] init: plymouth-upstart-bridge main process ended, respawning
[ 2.251508] init: plymouth-upstart-bridge main process (201) terminated with status 1
[ 2.251518] init: plymouth-upstart-bridge main process ended, respawning
[ 2.255774] init: plymouth-upstart-bridge main process (204) terminated with status 1
[ 2.255783] init: plymouth-upstart-bridge main process ended, respawning
[ 2.258237] init: plymouth-upstart-bridge main process (207) terminated with status 1
[ 2.258249] init: plymouth-upstart-bridge main process ended, respawning
[ 2.425008] usb 4-1: new full-speed USB device number 2 using ohci-pci
[ 2.599579] usb 4-1: New USB device found, idVendor=046d, idProduct=c07d
[ 2.599583] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.599584] usb 4-1: Product: Gaming Mouse G502
[ 2.599586] usb 4-1: Manufacturer: Logitech
[ 2.599587] usb 4-1: SerialNumber: 037C334E3236
[ 2.675561] random: nonblocking pool is initialized
[ 2.864644] usb 4-2: new full-speed USB device number 3 using ohci-pci
[ 2.988619] Switched to clocksource tsc
[ 3.043193] usb 4-2: New USB device found, idVendor=1b1c, idProduct=1b13
[ 3.043196] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.043198] usb 4-2: Product: Corsair K70 RGB Gaming Keyboard
[ 3.043200] usb 4-2: Manufacturer: Corsair
[ 3.043201] usb 4-2: SerialNumber: 1202B026AE3B940453702CB8F5001946
[ 3.080313] Adding 8000508k swap on /dev/sdb3. Priority:-1 extents:1 across:8000508k SSFS
[ 3.097379] EXT4-fs (sdb4): re-mounted. Opts: errors=remount-ro
[ 3.133043] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.185603] systemd-udevd[342]: starting version 204
[ 3.257413] lp: driver loaded but no devices found
[ 3.290059] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.300126] ppdev: user-space parallel port driver
[ 3.324878] wmi: Mapper loaded
[ 3.344198] [drm] Initialized drm 1.1.0 20060810
[ 3.401513] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
[ 3.401520] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.403326] nvidia: module license 'NVIDIA' taints kernel.
[ 3.403330] Disabling lock debugging due to kernel taint
[ 3.464167] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 3.476556] Bluetooth: Core ver 2.17
[ 3.476576] NET: Registered protocol family 31
[ 3.476577] Bluetooth: HCI device and connection manager initialized
[ 3.476584] Bluetooth: HCI socket layer initialized
[ 3.476586] Bluetooth: L2CAP socket layer initialized
[ 3.476589] Bluetooth: SCO socket layer initialized
[ 3.477263] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.487975] type=1400 audit(1455043234.592:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=507 comm="apparmor_parser"
[ 3.487981] type=1400 audit(1455043234.592:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=507 comm="apparmor_parser"
[ 3.488403] type=1400 audit(1455043234.596:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=507 comm="apparmor_parser"
[ 3.496239] Bluetooth: RFCOMM TTY layer initialized
[ 3.496249] Bluetooth: RFCOMM socket layer initialized
[ 3.496254] Bluetooth: RFCOMM ver 1.11
[ 3.497216] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.497218] Bluetooth: BNEP filters: protocol multicast
[ 3.497223] Bluetooth: BNEP socket layer initialized
[ 3.501514] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 3.525743] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:03:00.0 on minor 0
[ 3.525754] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.63 Sat Nov 7 21:25:42 PST 2015
[ 3.533846] usbcore: registered new interface driver usbhid
[ 3.533849] usbhid: USB HID core driver
[ 3.562136] type=1400 audit(1455043234.668:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=541 comm="apparmor_parser"
[ 3.562142] type=1400 audit(1455043234.668:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=541 comm="apparmor_parser"
[ 3.562146] type=1400 audit(1455043234.668:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=541 comm="apparmor_parser"
[ 3.562564] type=1400 audit(1455043234.668:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=541 comm="apparmor_parser"
[ 3.562568] type=1400 audit(1455043234.668:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=541 comm="apparmor_parser"
[ 3.562791] type=1400 audit(1455043234.668:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=541 comm="apparmor_parser"
[ 3.582662] MCE: In-kernel MCE decoding enabled.
[ 3.584993] EDAC MC: Ver: 3.0.0
[ 3.585164] Linux video capture interface: v2.00
[ 3.605397] AMD64 EDAC driver v3.4.0
[ 3.605426] EDAC amd64: DRAM ECC disabled.
[ 3.605430] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 3.605430] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 3.605430] (Note that use of the override may cause unknown side effects.)
[ 3.605967] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0804)
[ 3.722107] input: UVC Camera (046d:0804) as /devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6:1.0/input/input5
[ 3.722250] usbcore: registered new interface driver uvcvideo
[ 3.722252] USB Video Class driver (1.1.1)
[ 3.731601] r8169 0000:08:00.0 eth0: link down
[ 3.731611] r8169 0000:08:00.0 eth0: link down
[ 3.731698] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.773716] kvm: Nested Virtualization enabled
[ 3.773720] kvm: Nested Paging enabled
[ 3.791177] hda-intel 0000:00:14.2: Using LPIB position fix
[ 3.794937] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[ 3.810579] SKU: Nid=0x1d sku_cfg=0x4007f603
[ 3.810581] SKU: port_connectivity=0x1
[ 3.810582] SKU: enable_pcbeep=0x0
[ 3.810583] SKU: check_sum=0x00000007
[ 3.810584] SKU: customization=0x000000f6
[ 3.810585] SKU: external_amp=0x0
[ 3.810585] SKU: platform_type=0x0
[ 3.810586] SKU: swap=0x1
[ 3.810586] SKU: override=0x1
[ 3.812924] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.812927] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.812928] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.812929] mono: mono_out=0x0
[ 3.812930] dig-out=0x11/0x1e
[ 3.812931] inputs:
[ 3.812932] Front Mic=0x19
[ 3.812933] Rear Mic=0x18
[ 3.812934] Line=0x1a
[ 3.812935] realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d
[ 3.812936] realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0892
[ 3.845698] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 3.856547] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 3.857171] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 3.857343] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 3.857496] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 3.857717] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 3.857915] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 3.858135] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 3.858874] hda_intel: Disabling MSI
[ 3.858883] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
[ 3.858908] hda-intel 0000:03:00.1: Disabling 64bit DMA
[ 3.885583] hda-intel 0000:03:00.1: Enable delay in RIRB handling
[ 4.001043] init: samba-ad-dc main process (661) terminated with status 1
[ 4.018361] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input14
[ 4.018521] hid-generic 0003:046D:C07D.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:12.1-1/input0
[ 4.023976] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input15
[ 4.024658] hid-generic 0003:046D:C07D.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:12.1-1/input1
[ 4.025561] input: Corsair Corsair K70 RGB Gaming Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input16
[ 4.026006] hid-generic 0003:1B1C:1B13.0003: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair K70 RGB Gaming Keyboard ] on usb-0000:00:12.1-2/input0
[ 4.074289] usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[ 4.074292] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1<6>[ 4.074463] usbcore: registered new interface driver snd-usb-audio
[ 4.383530] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card2/input20
[ 4.383587] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card2/input19
[ 4.383627] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card2/input18
[ 4.383665] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card2/input17
[ 5.205398] r8169 0000:08:00.0 eth0: link up
[ 5.205407] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.658828] init: failsafe main process (625) killed by TERM signal
[ 6.808497] audit_printk_skb: 3 callbacks suppressed
[ 6.808500] type=1400 audit(1455043237.916:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=996 comm="apparmor_parser"
[ 6.808505] type=1400 audit(1455043237.916:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=996 comm="apparmor_parser"
[ 6.808509] type=1400 audit(1455043237.916:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=996 comm="apparmor_parser"
[ 6.808913] type=1400 audit(1455043237.916:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=995 comm="apparmor_parser"
[ 6.808919] type=1400 audit(1455043237.916:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=995 comm="apparmor_parser"
[ 6.808927] type=1400 audit(1455043237.916:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=996 comm="apparmor_parser"
[ 6.808931] type=1400 audit(1455043237.916:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=996 comm="apparmor_parser"
[ 6.809153] type=1400 audit(1455043237.916:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=996 comm="apparmor_parser"
[ 6.809184] type=1400 audit(1455043237.916:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=995 comm="apparmor_parser"
[ 6.814105] type=1400 audit(1455043237.924:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=999 comm="apparmor_parser"
[ 7.306462] init: plymouth-upstart-bridge main process ended, respawning
[ 7.409789] nvidia 0000:03:00.0: irq 50 for MSI/MSI-X
[ 8.654933] init: plymouth-stop pre-start process (1582) terminated with status 1
[ 14.016593] hid-generic 0003:1B1C:1B13.0004: usb_submit_urb(ctrl) failed: -1
[ 14.016613] hid-generic 0003:1B1C:1B13.0004: timeout initializing reports
[ 14.016750] input: Corsair Corsair K70 RGB Gaming Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input21
[ 14.017069] hid-generic 0003:1B1C:1B13.0004: input,hidraw3: USB HID v1.11 Keyboard [Corsair Corsair K70 RGB Gaming Keyboard ] on usb-0000:00:12.1-2/input1
[ 24.008133] hid-generic 0003:1B1C:1B13.0005: timeout initializing reports
[ 24.008228] hid-generic 0003:1B1C:1B13.0005: hiddev0,hidraw4: USB HID v1.11 Device [Corsair Corsair K70 RGB Gaming Keyboard ] on usb-0000:00:12.1-2/input2
[ 33.998679] hid-generic 0003:1B1C:1B13.0006: usb_submit_urb(ctrl) failed: -1
[ 33.998692] hid-generic 0003:1B1C:1B13.0006: timeout initializing reports
[ 33.998914] hid-generic 0003:1B1C:1B13.0006: hiddev0,hidraw5: USB HID v1.11 Device [Corsair Corsair K70 RGB Gaming Keyboard ] on usb-0000:00:12.1-2/input3
[ 34.066502] init: plymouth-splash main process (2741) terminated with status 1
[ 176.112607] systemd-hostnamed[3023]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 307.218427] audit_printk_skb: 126 callbacks suppressed
[ 307.218431] type=1400 audit(1455043536.975:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3344 comm="apparmor_parser"
[ 307.218437] type=1400 audit(1455043536.975:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3344 comm="apparmor_parser"
[ 307.218872] type=1400 audit(1455043536.979:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3344 comm="apparmor_parser"Hors ligne
#4 Le 11/02/2016, à 15:53
- Croa
Re : Demarrage et rapport d'erreur[Résolu]
Ton problème est différend du mien.
Je n'y comprends rien, désolé !
Bon courage.
Hors ligne
#5 Le 19/02/2016, à 19:57
- Hunkyu
Re : Demarrage et rapport d'erreur[Résolu]
Merci bien.
Bonne chance pour toi aussi !
Hors ligne