Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 04/02/2016, à 23:17

Croa

Démarrages ( boot ) difficiles [résolu]

Bonjour,

Depuis quelques temps mon système ne démarre plus tout seul. J'ai 4 noyaux mais seul Linux 3.13.0-24-generic démarre maintenant et encore est-ce très laborieux à partir du GRUB interne : Une fois sur deux ça plante. Mais Linux 3.13.0-24-generic démarre bien et à tous les coups avec Super-Grub-disk dans le lecteur de DVD. (Je dois juste lui indiquer le noyau à démarrer.)
J'ai essayè de refaire le GRUB mais c'est toujours pareil ! (Il faudrait peut-être ajouter des options de démarrage aux noyaux mais je ne sais pas faire et j'ai peur pour mon système !)
Tel qu'est configuré le GRUB interne je ne sais pas ce qui se passe (écran noir). Je sais toutefois qu'il y a des DRDY ERR : un contrôle SMART étendu m'indique pourtant que le disque est nickel en tous points. Par contre les montages volumes sont souvent laborieux (Ils mettent longtemps ; il se peut que ça ait un rapport.)
J'ai un nouveau disque SATA (quelle merde apparemment ces trucs !) monté sur une nouvelle carte AM1B-M de chez ASRock qui n'accepte que des disques SATA. (De toute façon on ne trouve presque plus de disques IDE.)
*
Est-ce que mon problème parle à quelqu'un ? D'avance MERCI !

Dernière modification par Croa (Le 15/02/2016, à 20:16)

Hors ligne

#2 Le 05/02/2016, à 22:44

Croa

Re : Démarrages ( boot ) difficiles [résolu]

Un petit bonjour aux administrateurs du site. Vous étiez en travaux aujourd'hui. Ce n'était pas trop grave? Bien content de vous retrouver ! smile
J'ai bien sûr tenté d'arranger seul mes problèmes de démarrage. Les démarrages en mode rescue sont plus parlants mais tout ça ressemble à de l'hébreu ! Le résultat est le même, évidemment.
Je suis passé à lilo, à tout hasard. C'est un tout petit peu mieux, plus spartiate que Grub mais un peu plus efficace ; seul Linux 3.13.0-24-generic démarre, apparemment à tous les coups mais c'est très long : Beaucoup de DRDY ERR !  Linux met 4 mn à se charger (au lieu de 2 avec Super-Grub-Disk ).

Autre info : Les noyaux HS se plantent à :

 Running /scrip/local-premount ... resume: libgcript version 1.5.3 

Hors ligne

#3 Le 07/02/2016, à 17:17

Croa

Re : Démarrages ( boot ) difficiles [résolu]

Personne ne peut m'aider ?? sad
*
Les démarrages avec un disque «Super-Grub-Disk» dans le lecteur durent 1mn 40.
Les démarrages avec Lilo durent 7mn 25.

L'arrêt système est long aussi et avec beaucoup de «DRDY ERR», apparemment toujours exactement les mêmes.

J'ai essayé de désactiver SMART dans le bios : C'est pareil !

Bon j'espère encore que mon problème dise quelque chose aux moustachus qui fréquentent ce forum...

Hors ligne

#4 Le 08/02/2016, à 00:00

Croa

Re : Démarrages ( boot ) difficiles [résolu]

Je vous ais fait un «dmesg|more »

ce qui donne :

 [ 1977.217762] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1977.231667] ata1.00: configured for PIO0
[ 1977.245733] ata1: EH complete
[ 1982.255476] ata1.00: qc timeout (cmd 0xa0)
[ 1982.255522] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1982.255532] ata1.00: irq_stat 0x40000001
[ 1982.255548] sr 0:0:0:0: CDB: 
[ 1982.255555] Test Unit Ready: 00 00 00 00 00 00
[ 1982.255586] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 30
[ 1982.255586]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 1982.255597] ata1.00: status: { DRDY ERR }
[ 1982.255611] ata1: hard resetting link
[ 1982.747531] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1982.761712] ata1.00: configured for PIO0
[ 1982.775551] ata1: EH complete
[ 1987.785134] ata1.00: qc timeout (cmd 0xa0)
[ 1987.785168] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1987.785176] ata1.00: irq_stat 0x40000001
[ 1987.785187] sr 0:0:0:0: CDB: 
[ 1987.785192] Test Unit Ready: 00 00 00 00 00 00
[ 1987.785218] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 1987.785218]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 1987.785227] ata1.00: status: { DRDY ERR }
[ 1987.785239] ata1: hard resetting link
[ 1988.277482] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1988.291453] ata1.00: configured for PIO0
[ 1988.305461] ata1: EH complete
[ 1993.323167] ata1.00: qc timeout (cmd 0xa0)
[ 1993.323206] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1993.323216] ata1.00: irq_stat 0x40000001
[ 1993.323230] sr 0:0:0:0: CDB: 
[ 1993.323236] Test Unit Ready: 00 00 00 00 00 00
[ 1993.323267] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 2
[ 1993.323267]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 1993.323278] ata1.00: status: { DRDY ERR }
[ 1993.323293] ata1: hard resetting link
[ 1993.815364] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1993.828597] ata1.00: configured for PIO0
[ 1993.843412] ata1: EH complete
[ 1998.853073] ata1.00: qc timeout (cmd 0xa0)
[ 1998.853112] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1998.853124] ata1.00: irq_stat 0x40000001
[ 1998.853138] sr 0:0:0:0: CDB: 
[ 1998.853144] Test Unit Ready: 00 00 00 00 00 00
[ 1998.853175] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 3
[ 1998.853175]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 1998.853186] ata1.00: status: { DRDY ERR }
[ 1998.853202] ata1: hard resetting link
[ 1999.345246] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1999.358552] ata1.00: configured for PIO0
[ 1999.373202] ata1: EH complete
[ 2004.382998] ata1.00: qc timeout (cmd 0xa0)
[ 2004.383037] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2004.383047] ata1.00: irq_stat 0x40000001
[ 2004.383061] sr 0:0:0:0: CDB: 
[ 2004.383068] Test Unit Ready: 00 00 00 00 00 00
[ 2004.383099] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 4
[ 2004.383099]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2004.383110] ata1.00: status: { DRDY ERR }
[ 2004.383125] ata1: hard resetting link
[ 2004.875153] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2004.889116] ata1.00: configured for PIO0
[ 2004.903100] ata1: EH complete
[ 2009.912900] ata1.00: qc timeout (cmd 0xa0)
[ 2009.912939] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2009.912949] ata1.00: irq_stat 0x40000001
[ 2009.912964] sr 0:0:0:0: CDB: 
[ 2009.912971] Test Unit Ready: 00 00 00 00 00 00
[ 2009.913001] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 5
[ 2009.913001]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2009.913012] ata1.00: status: { DRDY ERR }
[ 2009.913027] ata1: hard resetting link
[ 2010.404931] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2010.418965] ata1.00: configured for PIO0
[ 2010.433021] ata1: EH complete
[ 2015.446799] ata1.00: qc timeout (cmd 0xa0)
[ 2015.446838] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2015.446849] ata1.00: irq_stat 0x40000001
[ 2015.446863] sr 0:0:0:0: CDB: 
[ 2015.446869] Test Unit Ready: 00 00 00 00 00 00
[ 2015.446900] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 6
[ 2015.446900]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2015.446911] ata1.00: status: { DRDY ERR }
[ 2015.446926] ata1: hard resetting link
[ 2015.938999] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2015.952944] ata1.00: configured for PIO0
[ 2015.966978] ata1: EH complete
[ 2020.976688] ata1.00: qc timeout (cmd 0xa0)
[ 2020.976727] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2020.976737] ata1.00: irq_stat 0x40000001
[ 2020.976751] sr 0:0:0:0: CDB: 
[ 2020.976757] Test Unit Ready: 00 00 00 00 00 00
[ 2020.976788] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 7
[ 2020.976788]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2020.976799] ata1.00: status: { DRDY ERR }
[ 2020.976814] ata1: hard resetting link
[ 2021.468960] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2021.482292] ata1.00: configured for PIO0
[ 2021.496924] ata1: EH complete
[ 2026.510608] ata1.00: qc timeout (cmd 0xa0)
[ 2026.510638] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2026.510645] ata1.00: irq_stat 0x40000001
[ 2026.510655] sr 0:0:0:0: CDB: 
[ 2026.510660] Test Unit Ready: 00 00 00 00 00 00
[ 2026.510680] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 10
[ 2026.510680]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2026.510688] ata1.00: status: { DRDY ERR }
[ 2026.510700] ata1: hard resetting link
[ 2027.002892] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2027.016222] ata1.00: configured for PIO0
[ 2027.030866] ata1: EH complete
[ 2032.040689] ata1.00: qc timeout (cmd 0xa0)
[ 2032.040728] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2032.040738] ata1.00: irq_stat 0x40000001
[ 2032.040753] sr 0:0:0:0: CDB: 
[ 2032.040759] Test Unit Ready: 00 00 00 00 00 00
[ 2032.040791] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 11
[ 2032.040791]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2032.040802] ata1.00: status: { DRDY ERR }
[ 2032.040816] ata1: hard resetting link
[ 2032.532868] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2032.546834] ata1.00: configured for PIO0
[ 2032.560829] ata1: EH complete
[ 2037.570676] ata1.00: qc timeout (cmd 0xa0)
[ 2037.570714] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2037.570724] ata1.00: irq_stat 0x40000001
[ 2037.570740] sr 0:0:0:0: CDB: 
[ 2037.570746] Test Unit Ready: 00 00 00 00 00 00
[ 2037.570778] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 12
[ 2037.570778]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2037.570789] ata1.00: status: { DRDY ERR }
[ 2037.570803] ata1: hard resetting link
[ 2038.062842] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2038.076907] ata1.00: configured for PIO0
[ 2038.090754] ata1: EH complete
[ 2043.108549] ata1.00: qc timeout (cmd 0xa0)
[ 2043.108588] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2043.108599] ata1.00: irq_stat 0x40000001
[ 2043.108614] sr 0:0:0:0: CDB: 
[ 2043.108621] Test Unit Ready: 00 00 00 00 00 00
[ 2043.108652] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 14
[ 2043.108652]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2043.108663] ata1.00: status: { DRDY ERR }
[ 2043.108678] ata1: hard resetting link
[ 2043.600833] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2043.614832] ata1.00: configured for PIO0
[ 2043.628822] ata1: EH complete
[ 2048.638648] ata1.00: qc timeout (cmd 0xa0)
[ 2048.638688] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2048.638698] ata1.00: irq_stat 0x40000001
[ 2048.638714] sr 0:0:0:0: CDB: 
[ 2048.638720] Test Unit Ready: 00 00 00 00 00 00
[ 2048.638752] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 15
[ 2048.638752]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2048.638763] ata1.00: status: { DRDY ERR }
[ 2048.638777] ata1: hard resetting link
[ 2049.130831] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2049.144692] ata1.00: configured for PIO0
[ 2049.158806] ata1: EH complete
[ 2054.168663] ata1.00: qc timeout (cmd 0xa0)
[ 2054.168693] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2054.168699] ata1.00: irq_stat 0x40000001
[ 2054.168710] sr 0:0:0:0: CDB: 
[ 2054.168715] Test Unit Ready: 00 00 00 00 00 00
[ 2054.168735] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 16
[ 2054.168735]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2054.168742] ata1.00: status: { DRDY ERR }
[ 2054.168752] ata1: hard resetting link
[ 2054.660717] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2054.674011] ata1.00: configured for PIO0
[ 2054.688805] ata1: EH complete
[ 2059.698673] ata1.00: qc timeout (cmd 0xa0)
[ 2059.698714] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2059.698724] ata1.00: irq_stat 0x40000001
[ 2059.698740] sr 0:0:0:0: CDB: 
[ 2059.698746] Test Unit Ready: 00 00 00 00 00 00
[ 2059.698778] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 17
[ 2059.698778]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2059.698789] ata1.00: status: { DRDY ERR }
[ 2059.698803] ata1: hard resetting link
[ 2060.190852] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2060.204818] ata1.00: configured for PIO0
[ 2060.218851] ata1: EH complete
[ 2065.228706] ata1.00: qc timeout (cmd 0xa0)
[ 2065.228745] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2065.228755] ata1.00: irq_stat 0x40000001
[ 2065.228771] sr 0:0:0:0: CDB: 
[ 2065.228777] Test Unit Ready: 00 00 00 00 00 00
[ 2065.228808] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 18
[ 2065.228808]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2065.228819] ata1.00: status: { DRDY ERR }
[ 2065.228833] ata1: hard resetting link
[ 2065.720872] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2065.734822] ata1.00: configured for PIO0
[ 2065.748962] ata1: EH complete
[ 2070.758729] ata1.00: qc timeout (cmd 0xa0)
[ 2070.758769] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2070.758779] ata1.00: irq_stat 0x40000001
[ 2070.758794] sr 0:0:0:0: CDB: 
[ 2070.758800] Test Unit Ready: 00 00 00 00 00 00
[ 2070.758831] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 19
[ 2070.758831]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2070.758842] ata1.00: status: { DRDY ERR }
[ 2070.758856] ata1: hard resetting link
[ 2071.250797] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2071.264290] ata1.00: configured for PIO0
[ 2071.278885] ata1: EH complete
[ 2076.292785] ata1.00: qc timeout (cmd 0xa0)
[ 2076.292824] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2076.292834] ata1.00: irq_stat 0x40000001
[ 2076.292850] sr 0:0:0:0: CDB: 
[ 2076.292856] Test Unit Ready: 00 00 00 00 00 00
[ 2076.292887] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 22
[ 2076.292887]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2076.292898] ata1.00: status: { DRDY ERR }
[ 2076.292911] ata1: hard resetting link
[ 2076.784977] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2076.798886] ata1.00: configured for PIO0
[ 2076.812950] ata1: EH complete
[ 2081.822839] ata1.00: qc timeout (cmd 0xa0)
[ 2081.822878] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2081.822888] ata1.00: irq_stat 0x40000001
[ 2081.822903] sr 0:0:0:0: CDB: 
[ 2081.822910] Test Unit Ready: 00 00 00 00 00 00
[ 2081.822941] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 23
[ 2081.822941]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2081.822952] ata1.00: status: { DRDY ERR }
[ 2081.822966] ata1: hard resetting link
[ 2082.315040] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2082.328995] ata1.00: configured for PIO0
[ 2082.342971] ata1: EH complete
[ 2087.352896] ata1.00: qc timeout (cmd 0xa0)
[ 2087.352936] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2087.352946] ata1.00: irq_stat 0x40000001
[ 2087.352962] sr 0:0:0:0: CDB: 
[ 2087.352968] Test Unit Ready: 00 00 00 00 00 00
[ 2087.352999] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 24
[ 2087.352999]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2087.353010] ata1.00: status: { DRDY ERR }
[ 2087.353024] ata1: hard resetting link
[ 2087.845106] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2087.859054] ata1.00: configured for PIO0
[ 2087.873072] ata1: EH complete
[ 2092.894987] ata1.00: qc timeout (cmd 0xa0)
[ 2092.895027] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2092.895037] ata1.00: irq_stat 0x40000001
[ 2092.895053] sr 0:0:0:0: CDB: 
[ 2092.895060] Test Unit Ready: 00 00 00 00 00 00
[ 2092.895091] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 26
[ 2092.895091]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2092.895102] ata1.00: status: { DRDY ERR }
[ 2092.895116] ata1: hard resetting link
[ 2093.387183] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2093.401089] ata1.00: configured for PIO0
[ 2093.415148] ata1: EH complete
[ 2098.425054] ata1.00: qc timeout (cmd 0xa0)
[ 2098.425093] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2098.425103] ata1.00: irq_stat 0x40000001
[ 2098.425120] sr 0:0:0:0: CDB: 
[ 2098.425126] Test Unit Ready: 00 00 00 00 00 00
[ 2098.425158] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 27
[ 2098.425158]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2098.425169] ata1.00: status: { DRDY ERR }
[ 2098.425182] ata1: hard resetting link
[ 2098.917102] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2098.930998] ata1.00: configured for PIO0
[ 2098.945142] ata1: EH complete
[ 2103.955143] ata1.00: qc timeout (cmd 0xa0)
[ 2103.955182] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2103.955192] ata1.00: irq_stat 0x40000001
[ 2103.955208] sr 0:0:0:0: CDB: 
[ 2103.955215] Test Unit Ready: 00 00 00 00 00 00
[ 2103.955246] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 28
[ 2103.955246]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2103.955257] ata1.00: status: { DRDY ERR }
[ 2103.955271] ata1: hard resetting link
[ 2104.447240] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2104.460525] ata1.00: configured for PIO0
[ 2104.475269] ata1: EH complete
[ 2109.485115] ata1.00: qc timeout (cmd 0xa0)
[ 2109.485148] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2109.485156] ata1.00: irq_stat 0x40000001
[ 2109.485169] sr 0:0:0:0: CDB: 
[ 2109.485174] Test Unit Ready: 00 00 00 00 00 00
[ 2109.485200] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 29
[ 2109.485200]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2109.485209] ata1.00: status: { DRDY ERR }
[ 2109.485219] ata1: hard resetting link
[ 2109.977280] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2109.990563] ata1.00: configured for PIO0
[ 2110.005334] ata1: EH complete
[ 2115.015222] ata1.00: qc timeout (cmd 0xa0)
[ 2115.015261] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2115.015271] ata1.00: irq_stat 0x40000001
[ 2115.015287] sr 0:0:0:0: CDB: 
[ 2115.015294] Test Unit Ready: 00 00 00 00 00 00
[ 2115.015325] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 30
[ 2115.015325]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2115.015336] ata1.00: status: { DRDY ERR }
[ 2115.015350] ata1: hard resetting link
[ 2115.507425] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2115.521462] ata1.00: configured for PIO0
[ 2115.535498] ata1: EH complete
[ 2120.545475] ata1.00: qc timeout (cmd 0xa0)
[ 2120.545516] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2120.545526] ata1.00: irq_stat 0x40000001
[ 2120.545540] sr 0:0:0:0: CDB: 
[ 2120.545546] Test Unit Ready: 00 00 00 00 00 00
[ 2120.545578] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2120.545578]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2120.545589] ata1.00: status: { DRDY ERR }
[ 2120.545605] ata1: hard resetting link
[ 2121.037661] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2121.051390] ata1.00: configured for PIO0
[ 2121.065613] ata1: EH complete
[ 2126.079581] ata1.00: qc timeout (cmd 0xa0)
[ 2126.079620] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2126.079630] ata1.00: irq_stat 0x40000001
[ 2126.079644] sr 0:0:0:0: CDB: 
[ 2126.079650] Test Unit Ready: 00 00 00 00 00 00
[ 2126.079682] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 3
[ 2126.079682]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2126.079693] ata1.00: status: { DRDY ERR }
[ 2126.079708] ata1: hard resetting link
[ 2126.571759] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2126.585058] ata1.00: configured for PIO0
[ 2126.599724] ata1: EH complete
[ 2131.609709] ata1.00: qc timeout (cmd 0xa0)
[ 2131.609747] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2131.609757] ata1.00: irq_stat 0x40000001
[ 2131.609771] sr 0:0:0:0: CDB: 
[ 2131.609778] Test Unit Ready: 00 00 00 00 00 00
[ 2131.609809] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 4
[ 2131.609809]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2131.609820] ata1.00: status: { DRDY ERR }
[ 2131.609835] ata1: hard resetting link
[ 2132.101904] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2132.115870] ata1.00: configured for PIO0
[ 2132.129881] ata1: EH complete
[ 2137.139800] ata1.00: qc timeout (cmd 0xa0)
[ 2137.139840] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2137.139850] ata1.00: irq_stat 0x40000001
[ 2137.139865] sr 0:0:0:0: CDB: 
[ 2137.139872] Test Unit Ready: 00 00 00 00 00 00
[ 2137.139903] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 5
[ 2137.139903]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2137.139915] ata1.00: status: { DRDY ERR }
[ 2137.139930] ata1: hard resetting link
[ 2137.632013] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2137.645972] ata1.00: configured for PIO0
[ 2137.659989] ata1: EH complete
[ 2142.677991] ata1.00: qc timeout (cmd 0xa0)
[ 2142.678031] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2142.678041] ata1.00: irq_stat 0x40000001
[ 2142.678055] sr 0:0:0:0: CDB: 
[ 2142.678062] Test Unit Ready: 00 00 00 00 00 00
[ 2142.678093] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 7
[ 2142.678093]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2142.678104] ata1.00: status: { DRDY ERR }
[ 2142.678119] ata1: hard resetting link
[ 2143.170189] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2143.183561] ata1.00: configured for PIO0
[ 2143.198150] ata1: EH complete
[ 2148.208159] ata1.00: qc timeout (cmd 0xa0)
[ 2148.208198] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2148.208208] ata1.00: irq_stat 0x40000001
[ 2148.208223] sr 0:0:0:0: CDB: 
[ 2148.208229] Test Unit Ready: 00 00 00 00 00 00
[ 2148.208260] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 8
[ 2148.208260]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2148.208271] ata1.00: status: { DRDY ERR }
[ 2148.208286] ata1: hard resetting link
[ 2148.700357] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2148.714451] ata1.00: configured for PIO0
[ 2148.728331] ata1: EH complete
[ 2153.738313] ata1.00: qc timeout (cmd 0xa0)
[ 2153.738352] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2153.738362] ata1.00: irq_stat 0x40000001
[ 2153.738377] sr 0:0:0:0: CDB: 
[ 2153.738383] Test Unit Ready: 00 00 00 00 00 00
[ 2153.738414] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 9
[ 2153.738414]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2153.738425] ata1.00: status: { DRDY ERR }
[ 2153.738440] ata1: hard resetting link
[ 2154.230503] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2154.244463] ata1.00: configured for PIO0
[ 2154.258453] ata1: EH complete
[ 2159.268361] ata1.00: qc timeout (cmd 0xa0)
[ 2159.268400] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2159.268410] ata1.00: irq_stat 0x40000001
[ 2159.268425] sr 0:0:0:0: CDB: 
[ 2159.268431] Test Unit Ready: 00 00 00 00 00 00
[ 2159.268462] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 10
[ 2159.268462]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2159.268473] ata1.00: status: { DRDY ERR }
[ 2159.268488] ata1: hard resetting link
[ 2159.760663] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2159.774670] ata1.00: configured for PIO0
[ 2159.788618] ata1: EH complete
[ 2164.798647] ata1.00: qc timeout (cmd 0xa0)
[ 2164.798686] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2164.798695] ata1.00: irq_stat 0x40000001
[ 2164.798710] sr 0:0:0:0: CDB: 
[ 2164.798717] Test Unit Ready: 00 00 00 00 00 00
[ 2164.798748] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 11
[ 2164.798748]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2164.798759] ata1.00: status: { DRDY ERR }
[ 2164.798773] ata1: hard resetting link
[ 2165.290846] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2165.304854] ata1.00: configured for PIO0
[ 2165.318828] ata1: EH complete
[ 2170.328831] ata1.00: qc timeout (cmd 0xa0)
[ 2170.328872] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2170.328882] ata1.00: irq_stat 0x40000001
[ 2170.328898] sr 0:0:0:0: CDB: 
[ 2170.328904] Test Unit Ready: 00 00 00 00 00 00
[ 2170.328936] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 12
[ 2170.328936]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2170.328947] ata1.00: status: { DRDY ERR }
[ 2170.328962] ata1: hard resetting link
[ 2170.821012] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2170.834393] ata1.00: configured for PIO0
[ 2170.849006] ata1: EH complete
[ 2175.863017] ata1.00: qc timeout (cmd 0xa0)
[ 2175.863058] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2175.863067] ata1.00: irq_stat 0x40000001
[ 2175.863083] sr 0:0:0:0: CDB: 
[ 2175.863089] Test Unit Ready: 00 00 00 00 00 00
[ 2175.863120] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 15
[ 2175.863120]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2175.863131] ata1.00: status: { DRDY ERR }
[ 2175.863146] ata1: hard resetting link
[ 2176.355220] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2176.369174] ata1.00: configured for PIO0
[ 2176.383188] ata1: EH complete
[ 2181.393216] ata1.00: qc timeout (cmd 0xa0)
[ 2181.393255] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2181.393265] ata1.00: irq_stat 0x40000001
[ 2181.393280] sr 0:0:0:0: CDB: 
[ 2181.393287] Test Unit Ready: 00 00 00 00 00 00
[ 2181.393318] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 16
[ 2181.393318]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2181.393329] ata1.00: status: { DRDY ERR }
[ 2181.393343] ata1: hard resetting link
[ 2181.885405] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2181.899405] ata1.00: configured for PIO0
[ 2181.913384] ata1: EH complete
[ 2186.923308] ata1.00: qc timeout (cmd 0xa0)
[ 2186.923349] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2186.923359] ata1.00: irq_stat 0x40000001
[ 2186.923375] sr 0:0:0:0: CDB: 
[ 2186.923382] Test Unit Ready: 00 00 00 00 00 00
[ 2186.923414] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 17
[ 2186.923414]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2186.923425] ata1.00: status: { DRDY ERR }
[ 2186.923440] ata1: hard resetting link
[ 2187.415591] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2187.428945] ata1.00: configured for PIO0
[ 2187.443573] ata1: EH complete
[ 2192.461611] ata1.00: qc timeout (cmd 0xa0)
[ 2192.461650] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2192.461660] ata1.00: irq_stat 0x40000001
[ 2192.461676] sr 0:0:0:0: CDB: 
[ 2192.461682] Test Unit Ready: 00 00 00 00 00 00
[ 2192.461714] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 19
[ 2192.461714]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2192.461725] ata1.00: status: { DRDY ERR }
[ 2192.461738] ata1: hard resetting link
[ 2192.953794] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2192.967151] ata1.00: configured for PIO0
[ 2192.981866] ata1: EH complete
[ 2197.991807] ata1.00: qc timeout (cmd 0xa0)
[ 2197.991848] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2197.991858] ata1.00: irq_stat 0x40000001
[ 2197.991874] sr 0:0:0:0: CDB: 
[ 2197.991880] Test Unit Ready: 00 00 00 00 00 00
[ 2197.991912] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 20
[ 2197.991912]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2197.991923] ata1.00: status: { DRDY ERR }
[ 2197.991937] ata1: hard resetting link
[ 2198.483983] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2198.497266] ata1.00: configured for PIO0
[ 2198.511945] ata1: EH complete
[ 2203.522025] ata1.00: qc timeout (cmd 0xa0)
[ 2203.522065] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2203.522075] ata1.00: irq_stat 0x40000001
[ 2203.522091] sr 0:0:0:0: CDB: 
[ 2203.522097] Test Unit Ready: 00 00 00 00 00 00
[ 2203.522129] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 21
[ 2203.522129]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2203.522140] ata1.00: status: { DRDY ERR }
[ 2203.522153] ata1: hard resetting link
[ 2204.014231] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2204.028146] ata1.00: configured for PIO0
[ 2204.042217] ata1: EH complete
[ 2209.052251] ata1.00: qc timeout (cmd 0xa0)
[ 2209.052291] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2209.052301] ata1.00: irq_stat 0x40000001
[ 2209.052317] sr 0:0:0:0: CDB: 
[ 2209.052324] Test Unit Ready: 00 00 00 00 00 00
[ 2209.052355] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 22
[ 2209.052355]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2209.052366] ata1.00: status: { DRDY ERR }
[ 2209.052380] ata1: hard resetting link
[ 2209.544436] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2209.558431] ata1.00: configured for PIO0
[ 2209.572439] ata1: EH complete
[ 2214.582315] ata1.00: qc timeout (cmd 0xa0)
[ 2214.582352] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2214.582362] ata1.00: irq_stat 0x40000001
[ 2214.582378] sr 0:0:0:0: CDB: 
[ 2214.582385] Test Unit Ready: 00 00 00 00 00 00
[ 2214.582417] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 23
[ 2214.582417]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2214.582429] ata1.00: status: { DRDY ERR }
[ 2214.582442] ata1: hard resetting link
[ 2215.078558] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2215.092507] ata1.00: configured for PIO0
[ 2215.106614] ata1: EH complete
[ 2220.116539] ata1.00: qc timeout (cmd 0xa0)
[ 2220.116587] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2220.116597] ata1.00: irq_stat 0x40000001
[ 2220.116614] sr 0:0:0:0: CDB: 
[ 2220.116620] Test Unit Ready: 00 00 00 00 00 00
[ 2220.116650] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 24
[ 2220.116650]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2220.116657] ata1.00: status: { DRDY ERR }
[ 2220.116666] ata1: hard resetting link
[ 2220.608699] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2220.621843] ata1.00: configured for PIO0
[ 2220.636737] ata1: EH complete
[ 2225.650566] ata1.00: qc timeout (cmd 0xa0)
[ 2225.650600] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2225.650608] ata1.00: irq_stat 0x40000001
[ 2225.650622] sr 0:0:0:0: CDB: 
[ 2225.650627] Test Unit Ready: 00 00 00 00 00 00
[ 2225.650652] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 27
[ 2225.650652]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2225.650662] ata1.00: status: { DRDY ERR }
[ 2225.650673] ata1: hard resetting link
[ 2226.142895] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2226.156977] ata1.00: configured for PIO0
[ 2226.170887] ata1: EH complete
[ 2231.180800] ata1.00: qc timeout (cmd 0xa0)
[ 2231.180841] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2231.180851] ata1.00: irq_stat 0x40000001
[ 2231.180867] sr 0:0:0:0: CDB: 
[ 2231.180874] Test Unit Ready: 00 00 00 00 00 00
[ 2231.180906] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 28
[ 2231.180906]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2231.180917] ata1.00: status: { DRDY ERR }
[ 2231.180931] ata1: hard resetting link
[ 2231.676849] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2231.690141] ata1.00: configured for PIO0
[ 2231.704892] ata1: EH complete
[ 2236.714789] ata1.00: qc timeout (cmd 0xa0)
[ 2236.714829] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2236.714839] ata1.00: irq_stat 0x40000001
[ 2236.714855] sr 0:0:0:0: CDB: 
[ 2236.714862] Test Unit Ready: 00 00 00 00 00 00
[ 2236.714893] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 29
[ 2236.714893]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2236.714959] ata1.00: status: { DRDY ERR }
[ 2236.714973] ata1: hard resetting link
[ 2237.210898] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2237.224191] ata1.00: configured for PIO0
[ 2237.238993] ata1: EH complete
[ 2242.256806] ata1.00: qc timeout (cmd 0xa0)
[ 2242.256835] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2242.256841] ata1.00: irq_stat 0x40000001
[ 2242.256851] sr 0:0:0:0: CDB: 
[ 2242.256855] Test Unit Ready: 00 00 00 00 00 00
[ 2242.256875] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2242.256875]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2242.256882] ata1.00: status: { DRDY ERR }
[ 2242.256892] ata1: hard resetting link
[ 2242.752959] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2242.766145] ata1.00: configured for PIO0
[ 2242.781080] ata1: EH complete
[ 2247.790945] ata1.00: qc timeout (cmd 0xa0)
[ 2247.790974] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2247.790980] ata1.00: irq_stat 0x40000001
[ 2247.790989] sr 0:0:0:0: CDB: 
[ 2247.790994] Test Unit Ready: 00 00 00 00 00 00
[ 2247.791014] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 1
[ 2247.791014]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2247.791020] ata1.00: status: { DRDY ERR }
[ 2247.791030] ata1: hard resetting link
[ 2248.283195] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2248.296449] ata1.00: configured for PIO0
[ 2248.311297] ata1: EH complete
[ 2253.321082] ata1.00: qc timeout (cmd 0xa0)
[ 2253.321120] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2253.321130] ata1.00: irq_stat 0x40000001
[ 2253.321144] sr 0:0:0:0: CDB: 
[ 2253.321151] Test Unit Ready: 00 00 00 00 00 00
[ 2253.321182] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 2
[ 2253.321182]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2253.321193] ata1.00: status: { DRDY ERR }
[ 2253.321208] ata1: hard resetting link
[ 2253.813268] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2253.826429] ata1.00: configured for PIO0
[ 2253.841246] ata1: EH complete
[ 2258.851203] ata1.00: qc timeout (cmd 0xa0)
[ 2258.851244] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2258.851254] ata1.00: irq_stat 0x40000001
[ 2258.851268] sr 0:0:0:0: CDB: 
[ 2258.851275] Test Unit Ready: 00 00 00 00 00 00
[ 2258.851306] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 3
[ 2258.851306]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2258.851317] ata1.00: status: { DRDY ERR }
[ 2258.851333] ata1: hard resetting link
[ 2259.343249] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2259.357506] ata1.00: configured for PIO0
[ 2259.371383] ata1: EH complete
[ 2264.381257] ata1.00: qc timeout (cmd 0xa0)
[ 2264.381295] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2264.381305] ata1.00: irq_stat 0x40000001
[ 2264.381320] sr 0:0:0:0: CDB: 
[ 2264.381326] Test Unit Ready: 00 00 00 00 00 00
[ 2264.381357] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 4
[ 2264.381357]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2264.381368] ata1.00: status: { DRDY ERR }
[ 2264.381383] ata1: hard resetting link
[ 2264.873492] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2264.886948] ata1.00: configured for PIO0
[ 2264.901407] ata1: EH complete
[ 2269.911393] ata1.00: qc timeout (cmd 0xa0)
[ 2269.911433] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2269.911443] ata1.00: irq_stat 0x40000001
[ 2269.911459] sr 0:0:0:0: CDB: 
[ 2269.911466] Test Unit Ready: 00 00 00 00 00 00
[ 2269.911497] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 5
[ 2269.911497]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2269.911507] ata1.00: status: { DRDY ERR }
[ 2269.911523] ata1: hard resetting link
[ 2270.403588] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2270.417496] ata1.00: configured for PIO0
[ 2270.431535] ata1: EH complete
[ 2275.445507] ata1.00: qc timeout (cmd 0xa0)
[ 2275.445546] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2275.445557] ata1.00: irq_stat 0x40000001
[ 2275.445571] sr 0:0:0:0: CDB: 
[ 2275.445578] Test Unit Ready: 00 00 00 00 00 00
[ 2275.445608] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 8
[ 2275.445608]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2275.445619] ata1.00: status: { DRDY ERR }
[ 2275.445635] ata1: hard resetting link
[ 2275.937580] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2275.950928] ata1.00: configured for PIO0
[ 2275.965669] ata1: EH complete
[ 2280.975608] ata1.00: qc timeout (cmd 0xa0)
[ 2280.975659] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2280.975669] ata1.00: irq_stat 0x40000001
[ 2280.975684] sr 0:0:0:0: CDB: 
[ 2280.975690] Test Unit Ready: 00 00 00 00 00 00
[ 2280.975721] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 9
[ 2280.975721]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2280.975732] ata1.00: status: { DRDY ERR }
[ 2280.975747] ata1: hard resetting link
[ 2281.467804] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2281.481809] ata1.00: configured for PIO0
[ 2281.495754] ata1: EH complete
[ 2286.505724] ata1.00: qc timeout (cmd 0xa0)
[ 2286.505757] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2286.505765] ata1.00: irq_stat 0x40000001
[ 2286.505777] sr 0:0:0:0: CDB: 
[ 2286.505782] Test Unit Ready: 00 00 00 00 00 00
[ 2286.505807] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 10
[ 2286.505807]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2286.505816] ata1.00: status: { DRDY ERR }
[ 2286.505828] ata1: hard resetting link
[ 2286.997821] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2287.011864] ata1.00: configured for PIO0
[ 2287.025881] ata1: EH complete
[ 2292.043709] ata1.00: qc timeout (cmd 0xa0)
[ 2292.043748] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2292.043758] ata1.00: irq_stat 0x40000001
[ 2292.043773] sr 0:0:0:0: CDB: 
[ 2292.043780] Test Unit Ready: 00 00 00 00 00 00
[ 2292.043812] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 12
[ 2292.043812]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2292.043823] ata1.00: status: { DRDY ERR }
[ 2292.043838] ata1: hard resetting link
[ 2292.535905] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2292.549069] ata1.00: configured for PIO0
[ 2292.564034] ata1: EH complete
[ 2297.573963] ata1.00: qc timeout (cmd 0xa0)
[ 2297.574001] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2297.574011] ata1.00: irq_stat 0x40000001
[ 2297.574027] sr 0:0:0:0: CDB: 
[ 2297.574033] Test Unit Ready: 00 00 00 00 00 00
[ 2297.574064] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 13
[ 2297.574064]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2297.574075] ata1.00: status: { DRDY ERR }
[ 2297.574090] ata1: hard resetting link
[ 2298.066148] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2298.079963] ata1.00: configured for PIO0
[ 2298.094108] ata1: EH complete
[ 2303.104085] ata1.00: qc timeout (cmd 0xa0)
[ 2303.104124] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2303.104134] ata1.00: irq_stat 0x40000001
[ 2303.104149] sr 0:0:0:0: CDB: 
[ 2303.104156] Test Unit Ready: 00 00 00 00 00 00
[ 2303.104187] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 14
[ 2303.104187]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2303.104198] ata1.00: status: { DRDY ERR }
[ 2303.104212] ata1: hard resetting link
[ 2303.596283] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2303.609657] ata1.00: configured for PIO0
[ 2303.624202] ata1: EH complete
[ 2308.634076] ata1.00: qc timeout (cmd 0xa0)
[ 2308.634114] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2308.634124] ata1.00: irq_stat 0x40000001
[ 2308.634139] sr 0:0:0:0: CDB: 
[ 2308.634146] Test Unit Ready: 00 00 00 00 00 00
[ 2308.634177] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 15
[ 2308.634177]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2308.634189] ata1.00: status: { DRDY ERR }
[ 2308.634203] ata1: hard resetting link
[ 2309.126402] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2309.140399] ata1.00: configured for PIO0
[ 2309.154362] ata1: EH complete
[ 2314.164336] ata1.00: qc timeout (cmd 0xa0)
[ 2314.164375] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2314.164384] ata1.00: irq_stat 0x40000001
[ 2314.164400] sr 0:0:0:0: CDB: 
[ 2314.164407] Test Unit Ready: 00 00 00 00 00 00
[ 2314.164438] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 16
[ 2314.164438]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2314.164449] ata1.00: status: { DRDY ERR }
[ 2314.164463] ata1: hard resetting link
[ 2314.656526] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2314.670283] ata1.00: configured for PIO0
[ 2314.684497] ata1: EH complete
[ 2319.694361] ata1.00: qc timeout (cmd 0xa0)
[ 2319.694401] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2319.694411] ata1.00: irq_stat 0x40000001
[ 2319.694427] sr 0:0:0:0: CDB: 
[ 2319.694434] Test Unit Ready: 00 00 00 00 00 00
[ 2319.694466] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 17
[ 2319.694466]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2319.694477] ata1.00: status: { DRDY ERR }
[ 2319.694491] ata1: hard resetting link
[ 2320.186638] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2320.199956] ata1.00: configured for PIO0
[ 2320.214614] ata1: EH complete
[ 2325.228614] ata1.00: qc timeout (cmd 0xa0)
[ 2325.228653] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2325.228663] ata1.00: irq_stat 0x40000001
[ 2325.228679] sr 0:0:0:0: CDB: 
[ 2325.228685] Test Unit Ready: 00 00 00 00 00 00
[ 2325.228717] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 20
[ 2325.228717]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2325.228728] ata1.00: status: { DRDY ERR }
[ 2325.228742] ata1: hard resetting link
[ 2325.720798] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2325.734503] ata1.00: configured for PIO0
[ 2325.748758] ata1: EH complete
[ 2330.758624] ata1.00: qc timeout (cmd 0xa0)
[ 2330.758653] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2330.758660] ata1.00: irq_stat 0x40000001
[ 2330.758672] sr 0:0:0:0: CDB: 
[ 2330.758676] Test Unit Ready: 00 00 00 00 00 00
[ 2330.758697] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 21
[ 2330.758697]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2330.758705] ata1.00: status: { DRDY ERR }
[ 2330.758715] ata1: hard resetting link
[ 2331.250941] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2331.264944] ata1.00: configured for PIO0
[ 2331.278900] ata1: EH complete
[ 2336.288864] ata1.00: qc timeout (cmd 0xa0)
[ 2336.288904] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2336.288914] ata1.00: irq_stat 0x40000001
[ 2336.288930] sr 0:0:0:0: CDB: 
[ 2336.288936] Test Unit Ready: 00 00 00 00 00 00
[ 2336.288967] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 22
[ 2336.288967]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2336.288978] ata1.00: status: { DRDY ERR }
[ 2336.288992] ata1: hard resetting link
[ 2336.781080] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2336.794866] ata1.00: configured for PIO0
[ 2336.809027] ata1: EH complete
[ 2341.827038] ata1.00: qc timeout (cmd 0xa0)
[ 2341.827077] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2341.827086] ata1.00: irq_stat 0x40000001
[ 2341.827102] sr 0:0:0:0: CDB: 
[ 2341.827109] Test Unit Ready: 00 00 00 00 00 00
[ 2341.827140] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 24
[ 2341.827140]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2341.827151] ata1.00: status: { DRDY ERR }
[ 2341.827164] ata1: hard resetting link
[ 2342.319238] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2342.333338] ata1.00: configured for PIO0
[ 2342.347210] ata1: EH complete
[ 2347.357144] ata1.00: qc timeout (cmd 0xa0)
[ 2347.357186] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2347.357196] ata1.00: irq_stat 0x40000001
[ 2347.357213] sr 0:0:0:0: CDB: 
[ 2347.357219] Test Unit Ready: 00 00 00 00 00 00
[ 2347.357251] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 25
[ 2347.357251]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2347.357262] ata1.00: status: { DRDY ERR }
[ 2347.357276] ata1: hard resetting link
[ 2347.849260] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2347.863292] ata1.00: configured for PIO0
[ 2347.877336] ata1: EH complete
[ 2352.887276] ata1.00: qc timeout (cmd 0xa0)
[ 2352.887316] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2352.887326] ata1.00: irq_stat 0x40000001
[ 2352.887343] sr 0:0:0:0: CDB: 
[ 2352.887349] Test Unit Ready: 00 00 00 00 00 00
[ 2352.887380] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 26
[ 2352.887380]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2352.887392] ata1.00: status: { DRDY ERR }
[ 2352.887405] ata1: hard resetting link
[ 2353.379471] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2353.392910] ata1.00: configured for PIO0
[ 2353.407392] ata1: EH complete
[ 2358.417355] ata1.00: qc timeout (cmd 0xa0)
[ 2358.417394] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2358.417404] ata1.00: irq_stat 0x40000001
[ 2358.417420] sr 0:0:0:0: CDB: 
[ 2358.417427] Test Unit Ready: 00 00 00 00 00 00
[ 2358.417458] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 27
[ 2358.417458]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2358.417469] ata1.00: status: { DRDY ERR }
[ 2358.417483] ata1: hard resetting link
[ 2358.909553] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2358.922900] ata1.00: configured for PIO0
[ 2358.937553] ata1: EH complete
[ 2363.947431] ata1.00: qc timeout (cmd 0xa0)
[ 2363.947470] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2363.947480] ata1.00: irq_stat 0x40000001
[ 2363.947496] sr 0:0:0:0: CDB: 
[ 2363.947503] Test Unit Ready: 00 00 00 00 00 00
[ 2363.947534] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 28
[ 2363.947534]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2363.947545] ata1.00: status: { DRDY ERR }
[ 2363.947558] ata1: hard resetting link
[ 2364.439607] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2364.452970] ata1.00: configured for PIO0
[ 2364.467721] ata1: EH complete
[ 2369.477526] ata1.00: qc timeout (cmd 0xa0)
[ 2369.477566] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2369.477576] ata1.00: irq_stat 0x40000001
[ 2369.477592] sr 0:0:0:0: CDB: 
[ 2369.477599] Test Unit Ready: 00 00 00 00 00 00
[ 2369.477630] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 29
[ 2369.477630]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2369.477641] ata1.00: status: { DRDY ERR }
[ 2369.477654] ata1: hard resetting link
[ 2369.969709] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2369.983700] ata1.00: configured for PIO0
[ 2369.997674] ata1: EH complete
[ 2375.011618] ata1.00: qc timeout (cmd 0xa0)
[ 2375.011647] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2375.011654] ata1.00: irq_stat 0x40000001
[ 2375.011664] sr 0:0:0:0: CDB: 
[ 2375.011668] Test Unit Ready: 00 00 00 00 00 00
[ 2375.011688] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 1
[ 2375.011688]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2375.011695] ata1.00: status: { DRDY ERR }
[ 2375.011705] ata1: hard resetting link
[ 2375.503805] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2375.517767] ata1.00: configured for PIO0
[ 2375.531755] ata1: EH complete
[ 2380.541716] ata1.00: qc timeout (cmd 0xa0)
[ 2380.541755] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2380.541765] ata1.00: irq_stat 0x40000001
[ 2380.541779] sr 0:0:0:0: CDB: 
[ 2380.541786] Test Unit Ready: 00 00 00 00 00 00
[ 2380.541817] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 2
[ 2380.541817]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2380.541828] ata1.00: status: { DRDY ERR }
[ 2380.541843] ata1: hard resetting link
[ 2381.033898] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2381.047985] ata1.00: configured for PIO0
[ 2381.061962] ata1: EH complete
[ 2386.071829] ata1.00: qc timeout (cmd 0xa0)
[ 2386.071869] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2386.071879] ata1.00: irq_stat 0x40000001
[ 2386.071893] sr 0:0:0:0: CDB: 
[ 2386.071900] Test Unit Ready: 00 00 00 00 00 00
[ 2386.071931] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 3
[ 2386.071931]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2386.071942] ata1.00: status: { DRDY ERR }
[ 2386.071957] ata1: hard resetting link
[ 2386.563992] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2386.577938] ata1.00: configured for PIO0
[ 2386.591948] ata1: EH complete
[ 2391.609804] ata1.00: qc timeout (cmd 0xa0)
[ 2391.609843] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2391.609853] ata1.00: irq_stat 0x40000001
[ 2391.609868] sr 0:0:0:0: CDB: 
[ 2391.609874] Test Unit Ready: 00 00 00 00 00 00
[ 2391.609905] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 5
[ 2391.609905]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2391.609916] ata1.00: status: { DRDY ERR }
[ 2391.609931] ata1: hard resetting link
[ 2392.102015] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2392.116360] ata1.00: configured for PIO0
[ 2392.130035] ata1: EH complete
[ 2397.139918] ata1.00: qc timeout (cmd 0xa0)
[ 2397.139957] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2397.139969] ata1.00: irq_stat 0x40000001
[ 2397.139983] sr 0:0:0:0: CDB: 
[ 2397.139989] Test Unit Ready: 00 00 00 00 00 00
[ 2397.140021] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 6
[ 2397.140021]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2397.140032] ata1.00: status: { DRDY ERR }
[ 2397.140047] ata1: hard resetting link
[ 2397.632207] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2397.645928] ata1.00: configured for PIO0
[ 2397.660168] ata1: EH complete
[ 2402.670003] ata1.00: qc timeout (cmd 0xa0)
[ 2402.670048] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2402.670058] ata1.00: irq_stat 0x40000001
[ 2402.670073] sr 0:0:0:0: CDB: 
[ 2402.670080] Test Unit Ready: 00 00 00 00 00 00
[ 2402.670111] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 7
[ 2402.670111]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2402.670122] ata1.00: status: { DRDY ERR }
[ 2402.670137] ata1: hard resetting link
[ 2403.162167] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2403.175387] ata1.00: configured for PIO0
[ 2403.190241] ata1: EH complete
[ 2408.200079] ata1.00: qc timeout (cmd 0xa0)
[ 2408.200113] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2408.200121] ata1.00: irq_stat 0x40000001
[ 2408.200133] sr 0:0:0:0: CDB: 
[ 2408.200138] Test Unit Ready: 00 00 00 00 00 00
[ 2408.200167] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 8
[ 2408.200167]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2408.200177] ata1.00: status: { DRDY ERR }
[ 2408.200202] ata1: hard resetting link
[ 2408.692330] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2408.706293] ata1.00: configured for PIO0
[ 2408.720491] ata1: EH complete
[ 2413.730358] ata1.00: qc timeout (cmd 0xa0)
[ 2413.730398] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2413.730407] ata1.00: irq_stat 0x40000001
[ 2413.730423] sr 0:0:0:0: CDB: 
[ 2413.730429] Test Unit Ready: 00 00 00 00 00 00
[ 2413.730460] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 9
[ 2413.730460]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2413.730471] ata1.00: status: { DRDY ERR }
[ 2413.730485] ata1: hard resetting link
[ 2414.222514] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2414.235713] ata1.00: configured for PIO0
[ 2414.250544] ata1: EH complete
[ 2419.260485] ata1.00: qc timeout (cmd 0xa0)
[ 2419.260524] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2419.260534] ata1.00: irq_stat 0x40000001
[ 2419.260549] sr 0:0:0:0: CDB: 
[ 2419.260555] Test Unit Ready: 00 00 00 00 00 00
[ 2419.260586] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 10
[ 2419.260586]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2419.260597] ata1.00: status: { DRDY ERR }
[ 2419.260612] ata1: hard resetting link
[ 2419.752644] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2419.765908] ata1.00: configured for PIO0
[ 2419.780673] ata1: EH complete
[ 2424.794605] ata1.00: qc timeout (cmd 0xa0)
[ 2424.794644] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2424.794654] ata1.00: irq_stat 0x40000001
[ 2424.794670] sr 0:0:0:0: CDB: 
[ 2424.794676] Test Unit Ready: 00 00 00 00 00 00
[ 2424.794708] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 13
[ 2424.794708]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2424.794719] ata1.00: status: { DRDY ERR }
[ 2424.794733] ata1: hard resetting link
[ 2425.286806] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2425.300810] ata1.00: configured for PIO0
[ 2425.314760] ata1: EH complete
[ 2430.324736] ata1.00: qc timeout (cmd 0xa0)
[ 2430.324777] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2430.324786] ata1.00: irq_stat 0x40000001
[ 2430.324802] sr 0:0:0:0: CDB: 
[ 2430.324808] Test Unit Ready: 00 00 00 00 00 00
[ 2430.324839] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 14
[ 2430.324839]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2430.324851] ata1.00: status: { DRDY ERR }
[ 2430.324865] ata1: hard resetting link
[ 2430.816937] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2430.830375] ata1.00: configured for PIO0
[ 2430.844908] ata1: EH complete
[ 2435.854856] ata1.00: qc timeout (cmd 0xa0)
[ 2435.854896] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2435.854906] ata1.00: irq_stat 0x40000001
[ 2435.854922] sr 0:0:0:0: CDB: 
[ 2435.854928] Test Unit Ready: 00 00 00 00 00 00
[ 2435.854960] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 15
[ 2435.854960]          res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 2435.854971] ata1.00: status: { DRDY ERR }
[ 2435.854985] ata1: hard resetting link
[ 2436.347055] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2436.361061] ata1.00: configured for PIO0
[ 2436.375012] ata1: EH complete 

Ça aide ?

Hors ligne

#5 Le 08/02/2016, à 15:36

Croa

Re : Démarrages ( boot ) difficiles [résolu]

sad Vais-je rester avec mon problème ? sad

Je suis repassé sur GRUB. (Avantage : Options "recovery mode" )

J'ai installé un autre noyau fonctionnel  3.19.0-43-generic car l'autre présentait des défauts fonctionnels d'affichage avec XFCE. Un peu pourri tout de même : Démarrage /Grub interne 10mn et suite ininterrompue de DRDY ERR ! ( 1mn 40 avec Super-Grub-Disck dans le lecteur.)

Nota : J'ai bien essayé aussi de corriger ça avec boot repair. Mais :
- Boot repair installé me dit qu'il faut utiliser la version /disque.
- Boot repair /disque prétend que la machine n'est pas connecté sur Internet et refuse de travailler sans ça. C'est évidemment faux, l'ordinateur est bien connecté à Internet !   

Nouvelle piste :

À la réinstallation du GRUB j'ai eu

 installing for i386-pc platform 

Or mon nouveau système est 64 bits. C'est peut-être ça le problème ?

Pour installer GRUB j'ai fait un grub-install simple. N'y aurait-il pas un paramètre à ajouter pour une installation 64 bits ?

Dernière modification par Croa (Le 08/02/2016, à 15:37)

Hors ligne

#6 Le 15/02/2016, à 20:19

Croa

Re : Démarrages ( boot ) difficiles [résolu]

Ce n'était pas un problème de démarrage !  (Ce problème était épiphénomène d'un problème matériel en réalité.)

La solution est ici.

Hors ligne