Pages : 1
#1 Le 12/11/2016, à 13:14
- lepetit
probleme de demarrage
Bonjour, j'ai un double boot windows 7 et ubuntu 16.10
j'ai installé windows 7 hier soir (donc après mon installation d'ubuntu 16.10 d'origine; je sais, il ne faut pas le faire comme sa normalement )
bref, j'ai pu réparé le grub malgré tout avec boot-repair
mais je trouve le demarrage d'ubuntu assez lent (sa vient pas forcément de windows, sa l'était déja un peu avant )
d'ou sa peut venir ?
voila le contenu de différents fichier ou je soupçonne que c'est un peu le bordel.
mon fichier mtab
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
udev /dev devtmpfs rw,nosuid,relatime,size=4030756k,nr_inodes=1007689,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /run tmpfs rw,nosuid,noexec,relatime,size=811156k,mode=755 0 0
/dev/sda2 / ext4 rw,noatime,data=ordered 0 0
securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
tmpfs /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0
tmpfs /sys/fs/cgroup tmpfs rw,mode=755 0 0
cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd 0 0
pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0
efivarfs /sys/firmware/efi/efivars efivarfs rw,nosuid,nodev,noexec,relatime 0 0
cgroup /sys/fs/cgroup/net_cls,net_prio cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio 0 0
cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event 0 0
cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0
cgroup /sys/fs/cgroup/memory cgroup rw,nosuid,nodev,noexec,relatime,memory 0 0
cgroup /sys/fs/cgroup/pids cgroup rw,nosuid,nodev,noexec,relatime,pids,release_agent=/run/cgmanager/agents/cgm-release-agent.pids 0 0
cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset,clone_children 0 0
cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
cgroup /sys/fs/cgroup/hugetlb cgroup rw,nosuid,nodev,noexec,relatime,hugetlb,release_agent=/run/cgmanager/agents/cgm-release-agent.hugetlb 0 0
cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=9338 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
hugetlbfs /dev/hugepages hugetlbfs rw,relatime 0 0
mqueue /dev/mqueue mqueue rw,relatime 0 0
fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
tmpfs /tmp tmpfs rw,nosuid,nodev,noatime,size=786432k 0 0
tmpfs /var/tmp tmpfs rw,nosuid,nodev,noatime,size=262144k 0 0
/dev/sda1 /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 0
binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0
tmpfs /run/user/1000 tmpfs rw,nosuid,nodev,relatime,size=811152k,mode=700,uid=1000,gid=1000 0 0
gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0
/dev/sdb2 /media/sebastien/D4364FF8364FD9DE fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0mon fichier fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=6eb18627-5245-4e5d-998e-05baabae28ca / ext4 defaults,noatime 0 1
# swap was on /dev/sda3 during installation
UUID=8123cb05-47a8-4fbf-835a-2b2aea8ecdfa none swap sw 0 0
tmpfs /tmp tmpfs defaults,noatime,exec,nosuid,nodev,mode=1777,size=768m 0 0
tmpfs /var/tmp tmpfs defaults,noatime,exec,nosuid,nodev,mode=1777,size=256m 0 0
#volume stockage
#UUID=48272333-0808-4c1e-bff1-415bf9b62520 /media/sebastien ext4 defaults,noatime 0 1
UUID=A700-488B /boot/efi vfat defaults 0 1mon boot info
Boot Info Script cfd9efe + Boot-Repair extra info [Boot-Info 26Apr2016]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bkpbootx64.efi /EFI/Boot/bootx64.efi
/EFI/ubuntu/MokManager.efi /EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi
/boot-sav/log/2016-11-12__11h43boot-repair40/sda1/bootx
64.efi
/boot-sav/log/2016-11-12__11h46boot-repair30/sda1/bootx
64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.10
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Mounting failed: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Windows/System32/winload.exe
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,945,331,711 1,944,281,088 Data partition (Linux)
/dev/sda3 1,945,331,712 1,953,523,711 8,192,000 Swap partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 + 2,048 264,191 262,144 Microsoft Reserved Partition (Windows)
/dev/sdb2 264,192 1,953,523,711 1,953,259,520 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 A700-488B vfat
/dev/sda2 6eb18627-5245-4e5d-998e-05baabae28ca ext4
/dev/sda3 8123cb05-47a8-4fbf-835a-2b2aea8ecdfa swap
/dev/sdb1 48272333-0808-4c1e-bff1-415bf9b62520 ext4
/dev/sdb2 D4364FF8364FD9DE ntfs
/dev/zram0 f06b7b4f-f019-4ef0-b321-8e82b6d571a8 swap
/dev/zram1 ccbd6346-b08a-407a-b17f-fddbf5130ff9 swap
/dev/zram2 dbcfc12f-a857-4a33-a863-4f358ad0c0a3 swap
/dev/zram3 0f819c9d-eb30-43ea-9625-b6ae98100fc9 swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Nov 12 12:10 ata-SAMSUNG_HD103SI_S1VSJDWZ528157 -> ../../sdb
lrwxrwxrwx 1 root root 10 Nov 12 12:10 ata-SAMSUNG_HD103SI_S1VSJDWZ528157-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Nov 12 12:10 ata-SAMSUNG_HD103SI_S1VSJDWZ528157-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 Nov 12 12:10 ata-WDC_WD10EZEX-60M2NA0_WD-WCC3F5NRSRKK -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 12 12:10 ata-WDC_WD10EZEX-60M2NA0_WD-WCC3F5NRSRKK-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 12 12:10 ata-WDC_WD10EZEX-60M2NA0_WD-WCC3F5NRSRKK-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Nov 12 12:10 ata-WDC_WD10EZEX-60M2NA0_WD-WCC3F5NRSRKK-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 Nov 12 11:58 usb-Generic-_SD_MMC_MS_PRO_20120926571200000-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 9 Nov 12 12:10 wwn-0x50014ee2b6b72470 -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 12 12:10 wwn-0x50014ee2b6b72470-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 12 12:10 wwn-0x50014ee2b6b72470-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Nov 12 12:10 wwn-0x50014ee2b6b72470-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 Nov 12 12:10 wwn-0x50024e900385f6d0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Nov 12 12:10 wwn-0x50024e900385f6d0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Nov 12 12:10 wwn-0x50024e900385f6d0-part2 -> ../../sdb2
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 / ext4 (rw,noatime,data=ordered)
/dev/sdb2 /media/sebastien/D4364FF8364FD9DE fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6eb18627-5245-4e5d-998e-05baabae28ca
else
search --no-floppy --fs-uuid --set=root 6eb18627-5245-4e5d-998e-05baabae28ca
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-6eb18627-5245-4e5d-998e-05baabae28ca' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6eb18627-5245-4e5d-998e-05baabae28ca
else
search --no-floppy --fs-uuid --set=root 6eb18627-5245-4e5d-998e-05baabae28ca
fi
linux /boot/vmlinuz-4.8.0-27-generic root=UUID=6eb18627-5245-4e5d-998e-05baabae28ca ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-27-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-6eb18627-5245-4e5d-998e-05baabae28ca' {
menuentry 'Ubuntu, with Linux 4.8.0-27-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-27-generic-advanced-6eb18627-5245-4e5d-998e-05baabae28ca' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6eb18627-5245-4e5d-998e-05baabae28ca
else
search --no-floppy --fs-uuid --set=root 6eb18627-5245-4e5d-998e-05baabae28ca
fi
echo 'Loading Linux 4.8.0-27-generic ...'
linux /boot/vmlinuz-4.8.0-27-generic root=UUID=6eb18627-5245-4e5d-998e-05baabae28ca ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.8.0-27-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-27-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-27-generic-init-upstart-6eb18627-5245-4e5d-998e-05baabae28ca' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6eb18627-5245-4e5d-998e-05baabae28ca
else
search --no-floppy --fs-uuid --set=root 6eb18627-5245-4e5d-998e-05baabae28ca
fi
echo 'Loading Linux 4.8.0-27-generic ...'
linux /boot/vmlinuz-4.8.0-27-generic root=UUID=6eb18627-5245-4e5d-998e-05baabae28ca ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.8.0-27-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-27-generic-recovery-6eb18627-5245-4e5d-998e-05baabae28ca' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6eb18627-5245-4e5d-998e-05baabae28ca
else
search --no-floppy --fs-uuid --set=root 6eb18627-5245-4e5d-998e-05baabae28ca
fi
echo 'Loading Linux 4.8.0-27-generic ...'
linux /boot/vmlinuz-4.8.0-27-generic root=UUID=6eb18627-5245-4e5d-998e-05baabae28ca ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.8.0-27-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-26-generic-advanced-6eb18627-5245-4e5d-998e-05baabae28ca' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6eb18627-5245-4e5d-998e-05baabae28ca
else
search --no-floppy --fs-uuid --set=root 6eb18627-5245-4e5d-998e-05baabae28ca
fi
echo 'Loading Linux 4.8.0-26-generic ...'
linux /boot/vmlinuz-4.8.0-26-generic root=UUID=6eb18627-5245-4e5d-998e-05baabae28ca ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.8.0-26-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-26-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-26-generic-init-upstart-6eb18627-5245-4e5d-998e-05baabae28ca' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6eb18627-5245-4e5d-998e-05baabae28ca
else
search --no-floppy --fs-uuid --set=root 6eb18627-5245-4e5d-998e-05baabae28ca
fi
echo 'Loading Linux 4.8.0-26-generic ...'
linux /boot/vmlinuz-4.8.0-26-generic root=UUID=6eb18627-5245-4e5d-998e-05baabae28ca ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.8.0-26-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-26-generic-recovery-6eb18627-5245-4e5d-998e-05baabae28ca' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6eb18627-5245-4e5d-998e-05baabae28ca
else
search --no-floppy --fs-uuid --set=root 6eb18627-5245-4e5d-998e-05baabae28ca
fi
echo 'Loading Linux 4.8.0-26-generic ...'
linux /boot/vmlinuz-4.8.0-26-generic root=UUID=6eb18627-5245-4e5d-998e-05baabae28ca ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.8.0-26-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "Windows UEFI bootmgfw.efi" {
search --fs-uuid --no-floppy --set=root A700-488B
chainloader (${root})/EFI/Microsoft/Boot/bootmgfw.efi
}
menuentry "Windows Boot UEFI loader" {
search --fs-uuid --no-floppy --set=root A700-488B
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}
menuentry "EFI/ubuntu/fwupx64.efi" {
search --fs-uuid --no-floppy --set=root A700-488B
chainloader (${root})/EFI/ubuntu/fwupx64.efi
}
menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root A700-488B
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-A700-488B' {
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 A700-488B
else
search --no-floppy --fs-uuid --set=root A700-488B
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=6eb18627-5245-4e5d-998e-05baabae28ca / ext4 defaults,noatime 0 1
# swap was on /dev/sda3 during installation
UUID=8123cb05-47a8-4fbf-835a-2b2aea8ecdfa none swap sw 0 0
tmpfs /tmp tmpfs defaults,noatime,exec,nosuid,nodev,mode=1777,size=768m 0 0
tmpfs /var/tmp tmpfs defaults,noatime,exec,nosuid,nodev,mode=1777,size=256m 0 0
#volume stockage
#UUID=48272333-0808-4c1e-bff1-415bf9b62520 /media/sebastien ext4 defaults,noatime 0 1
UUID=A700-488B /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
752.628719330 = 808.128933888 boot/grub/grub.cfg 1
138.550090790 = 148.767027200 boot/vmlinuz-4.8.0-26-generic 1
850.554397583 = 913.275830272 boot/vmlinuz-4.8.0-27-generic 1
850.554397583 = 913.275830272 vmlinuz 1
138.550090790 = 148.767027200 vmlinuz.old 1
846.909984589 = 909.362671616 boot/initrd.img-4.2.0-16-generic.old-dkms 2
851.324050903 = 914.102239232 boot/initrd.img-4.2.0-27-generic.old-dkms 1
224.094722748 = 240.619876352 boot/initrd.img-4.2.0-30-generic.old-dkms 2
224.035404205 = 240.556183552 boot/initrd.img-4.2.0-34-generic.old-dkms 2
756.068431854 = 811.822297088 boot/initrd.img-4.8.0-26-generic 4
886.607353210 = 951.987396608 boot/initrd.img-4.8.0-27-generic 4
886.607353210 = 951.987396608 initrd.img 4
756.068431854 = 811.822297088 initrd.img.old 4
======================== Unknown MBRs/Boot Sectors/etc: ========================
/dev/sdb1: unknown GPT attributes
8000000000000000
========= Devices which don't seem to have a corresponding hard drive: =========
sdc
ADDITIONAL INFORMATION :
=================== log of boot-info 2016-11-12__12h10 ===================
boot-info version : 4ppa38
boot-sav version : 4ppa38
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa38
boot-info is executed in installed-session (Ubuntu 16.10, yakkety, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.8.0-27-generic root=UUID=6eb18627-5245-4e5d-998e-05baabae28ca ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 16.10 CurrentSession:linux
/dev/sda1@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
=================== blkid:
/dev/sda1: UUID="A700-488B" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="204b2a2f-04d6-4dd5-8fe1-7f452b1ff555"
/dev/sda2: UUID="6eb18627-5245-4e5d-998e-05baabae28ca" TYPE="ext4" PARTUUID="8992daeb-1427-46e3-9200-c2eeaf5556f5"
/dev/sda3: UUID="8123cb05-47a8-4fbf-835a-2b2aea8ecdfa" TYPE="swap" PARTUUID="e66e2690-50f6-476a-bc8c-dd9e2526a1d5"
/dev/sdb1: UUID="48272333-0808-4c1e-bff1-415bf9b62520" TYPE="ext4" PARTLABEL="Microsoft reserved partition" PARTUUID="30e8007e-9751-4770-af16-944e8c3e2e97"
/dev/sdb2: UUID="D4364FF8364FD9DE" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="0d8b39c0-43ec-4e9e-a0dd-928253829943"
/dev/zram0: UUID="f06b7b4f-f019-4ef0-b321-8e82b6d571a8" TYPE="swap"
/dev/zram1: UUID="ccbd6346-b08a-407a-b17f-fddbf5130ff9" TYPE="swap"
/dev/zram2: UUID="dbcfc12f-a857-4a33-a863-4f358ad0c0a3" TYPE="swap"
/dev/zram3: UUID="0f819c9d-eb30-43ea-9625-b6ae98100fc9" TYPE="swap"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on sdb2.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 nov. 12 11:46 grub.d
total 80
-rwxr-xr-x 1 root root 9791 oct. 14 2015 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 oct. 14 2015 10_linux
-rwxr-xr-x 1 root root 11082 oct. 14 2015 20_linux_xen
-rwxr-xr-x 1 root root 1992 août 27 2015 20_memtest86+
-rwxr-xr-x 1 root root 590 nov. 12 11:46 25_custom
-rwxr-xr-x 1 root root 11692 oct. 14 2015 30_os-prober
-rwxr-xr-x 1 root root 1418 oct. 14 2015 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 14 2015 40_custom
-rwxr-xr-x 1 root root 216 oct. 14 2015 41_custom
-rw-r--r-- 1 root root 483 oct. 14 2015 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=A700-488B (sda1)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bkpbootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
Presence of bkp file detected: /boot/efi/EFI/Boot/bkpbootx64.efi
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,0003,0001,0002,0009,0007,0008
Boot0000* ubuntu HD(1,GPT,204b2a2f-04d6-4dd5-8fe1-7f452b1ff555,0x800,0x100000)/File(EFIUBUNTUGRUBX64.EFI)
Boot0001* USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)..BO
Boot0002* USB Hard Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)..BO
Boot0003* Windows Boot Manager HD(1,GPT,204b2a2f-04d6-4dd5-8fe1-7f452b1ff555,0x800,0x100000)/File(EFIMICROSOFTBOOTBOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0007* USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)..BO
Boot0008* Hard Drive BBS(HD,,0x0)..GO..NO........O.W.D.C. .W.D.1.0.E.Z.E.X.-.6.0.M.2.N.A.0.................>..Gd-.;.A..MQ..L. . . . .W. .-.D.C.W.3.C.5.F.R.N.R.S.K.K........BO..NO........O.S.A.M.S.U.N.G. .H.D.1.0.3.S.I.................>..Gd-.;.A..MQ..L.1.S.S.V.D.J.Z.W.2.5.1.8.7.5. . . . . . ........BO
Boot0009* ubuntu HD(1,GPT,204b2a2f-04d6-4dd5-8fe1-7f452b1ff555,0x800,0x100000)/File(EFIUBUNTUSHIMX64.EFI)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sdb2 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /media/sebastien/D4364FF8364FD9DE.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
sdb : GPT, no-BIOS_boot, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD10EZEX-60M (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 EFI System Partition boot, esp
2 538MB 996GB 995GB ext4
3 996GB 1000GB 4194MB linux-swap(v1)
Model: ATA SAMSUNG HD103SI (scsi)
Disk /dev/sdb: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 135MB 134MB ext4 Microsoft reserved partition msftres
2 135MB 1000GB 1000GB ntfs Basic data partition msftdata
Model: Unknown (unknown)
Disk /dev/zram3: 1038MB
Sector size (logical/physical): 4096B/4096B
Partition Table: loop
Disk Flags:
Number Start End Size File system Flags
1 0.00B 1038MB 1038MB linux-swap(v1)
Model: Unknown (unknown)
Disk /dev/zram1: 1038MB
Sector size (logical/physical): 4096B/4096B
Partition Table: loop
Disk Flags:
Number Start End Size File system Flags
1 0.00B 1038MB 1038MB linux-swap(v1)
Model: Unknown (unknown)
Disk /dev/zram2: 1038MB
Sector size (logical/physical): 4096B/4096B
Partition Table: loop
Disk Flags:
Number Start End Size File system Flags
1 0.00B 1038MB 1038MB linux-swap(v1)
Model: Unknown (unknown)
Disk /dev/zram0: 1038MB
Sector size (logical/physical): 4096B/4096B
Partition Table: loop
Disk Flags:
Number Start End Size File system Flags
1 0.00B 1038MB 1038MB linux-swap(v1)
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA WDC WD10EZEX-60M:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:996GB:995GB:ext4::;
3:996GB:1000GB:4194MB:linux-swap(v1)::;
BYT;
/dev/sdb:1000GB:scsi:512:512:gpt:ATA SAMSUNG HD103SI:;
1:1049kB:135MB:134MB:ext4:Microsoft reserved partition:msftres;
2:135MB:1000GB:1000GB:ntfs:Basic data partition:msftdata;
BYT;
/dev/zram3:1038MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:1038MB:1038MB:linux-swap(v1)::;
BYT;
/dev/zram1:1038MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:1038MB:1038MB:linux-swap(v1)::;
BYT;
/dev/zram2:1038MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:1038MB:1038MB:linux-swap(v1)::;
BYT;
/dev/zram0:1038MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:1038MB:1038MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sdb disk 931,5G
sdb2 part ntfs 931,4G
sdb1 part ext4 128M
zram3 disk 990,2M
zram1 disk 990,2M
sda disk 931,5G
sda2 part ext4 927,1G
sda3 part swap 3,9G
sda1 part vfat 512M
zram2 disk 990,2M
zram0 disk 990,2M
KNAME ROTA RO RM STATE MOUNTPOINT
sdb 1 0 0 running
sdb2 1 0 0 /media/sebastien/D4364FF8364FD9DE
sdb1 1 0 0
zram3 0 0 0 [SWAP]
zram1 0 0 0 [SWAP]
sda 1 0 0 running
sda2 1 0 0 /
sda3 1 0 0 [SWAP]
sda1 1 0 0 /boot/efi
zram2 0 0 0 [SWAP]
zram0 0 0 0 [SWAP]
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4030756k,nr_inodes=1007689,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=811156k,mode=755)
/dev/sda2 on / type ext4 (rw,noatime,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (rw,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids,release_agent=/run/cgmanager/agents/cgm-release-agent.pids)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb,release_agent=/run/cgmanager/agents/cgm-release-agent.hugetlb)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=9338)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=786432k)
tmpfs on /var/tmp type tmpfs (rw,nosuid,nodev,noatime,size=262144k)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=811152k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sdb2 on /media/sebastien/D4364FF8364FD9DE type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
=================== ls:
/sys/block/sda (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hidraw3 hidraw4 hidraw5 hidraw6 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 initctl input kmsg lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null nvidia0 nvidiactl nvidia-modeset nvidia-uvm port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sdb2 sdc sg0 sg1 sg2 shm snapshot snd stderr stdin stdout uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 8b 48 00 a7 4e 4f 20 4e 41 4d 45 20 20 |..).H..NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 04 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 5f 6c 74 00 00 00 00 |........._lt....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 de d9 4f 36 f8 4f 36 d4 |..........O6.O6.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 |t.............Er|
00000190 72 65 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 |reur lecture dis|
000001a0 71 75 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 61 62 |que...BOOTMGR ab|
000001b0 73 65 6e 74 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 |sent...BOOTMGR c|
000001c0 6f 6d 70 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b |ompress....Ctrl+|
000001d0 41 6c 74 2b 53 75 70 70 72 20 70 6f 75 72 20 72 |Alt+Suppr pour r|
000001e0 65 64 82 6d 61 72 72 65 72 0d 0a 00 6f 20 72 65 |ed.marrer...o re|
000001f0 73 74 61 72 74 0d 0a 00 8c a4 b5 c9 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 793M 9.8M 783M 2% /run
/dev/sda2 ext4 913G 579G 288G 67% /
tmpfs tmpfs 3.9G 172K 3.9G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
tmpfs tmpfs 768M 2.3M 766M 1% /tmp
tmpfs tmpfs 256M 0 256M 0% /var/tmp
/dev/sda1 vfat 511M 32M 480M 7% /boot/efi
tmpfs tmpfs 793M 120K 793M 1% /run/user/1000
/dev/sdb2 fuseblk 932G 84G 848G 10% /media/sebastien/D4364FF8364FD9DE
=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: D59D93E5-EF8A-4095-AFCA-40D6C3EAAC20
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 1945331711 1944281088 927.1G Linux filesystem
/dev/sda3 1945331712 1953523711 8192000 3.9G Linux swap
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: B1F98DA9-8397-4521-985F-B1703FEA2514
Device Start End Sectors Size Type
/dev/sdb1 2048 264191 262144 128M Microsoft reserved
/dev/sdb2 264192 1953523711 1953259520 931.4G Microsoft basic data
Disk /dev/zram0: 990.2 MiB, 1038278656 bytes, 253486 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 990.2 MiB, 1038278656 bytes, 253486 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 990.2 MiB, 1038278656 bytes, 253486 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 990.2 MiB, 1038278656 bytes, 253486 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot use-standard-efi-file restore-efi-backups
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (1000GB) !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.10] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
Si votre ordinateur redémarre directement sur Windows, essayez de changer l'ordre de démarrage dans votre BIOS.
Si votre BIOS ne permet pas de changer l'ordre de démarrage, changez l'entrée de démarrage par défaut de l'amorceur Windows.
Par exemple, vous pouvez démarrer Windows, puis saisir la commande suivante dans une invite de commande en mode administrateur :
bcdedit /set {bootmgr} path \EFI\...\grub*.efi
=================== User settings
The settings chosen by the user will not act on the boot.mon fichier grub
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"a noter que boot repair m'a ajouter plusieurs ligne dans le grub
qu'en pensez vous ?
Dernière modification par lepetit (Le 12/11/2016, à 13:17)
-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10
Hors ligne
#2 Le 13/11/2016, à 12:07
- lepetit
Re : probleme de demarrage
personne 
?
-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10
Hors ligne
#3 Le 13/11/2016, à 17:59
- Bougron
Re : probleme de demarrage
Bonjour
Peux-tu indiquer le temps de boot. 1 Minute c'est normal.
Peux-tu donner le résultat de cette commande
dmesg | tail -1000Hors ligne
#4 Le 13/11/2016, à 19:44
- lepetit
Re : probleme de demarrage
salut
il me faut environ 1 minute 2 pour arriver a l’écran de connexion et 21 seconde pour arriver au bureau
certe je ne suis pas sur ssd (disque dur 1to western digital 7200tpm)mais je trouve sa lent perso
windows 7 est plus rapide pour arriver au bureau
pour la commande :
[ 0.000000] microcode: microcode updated early to revision 0x20, date = 2016-03-16
[ 0.000000] Linux version 4.8.0-27-generic (buildd@lgw01-11) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #29-Ubuntu SMP Thu Oct 20 21:03:13 UTC 2016 (Ubuntu 4.8.0-27.29-generic 4.8.1)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-27-generic root=UUID=6eb18627-5245-4e5d-998e-05baabae28ca ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ccf36fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ccf37000-0x00000000ccf3dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ccf3e000-0x00000000cd09cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd09d000-0x00000000cd890fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cd891000-0x00000000cd8c7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd8c8000-0x00000000cdba8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdba9000-0x00000000ddd47fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddd48000-0x00000000ddddffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddde0000-0x00000000dddfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dddff000-0x00000000ddf57fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ddf58000-0x00000000def6bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000def6c000-0x00000000deffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ESRT=0xdef6a998 ACPI=0xddde6000 ACPI 2.0=0xddde6000 SMBIOS=0xf04c0 MPS=0xfd560
[ 0.000000] esrt: Reserving ESRT space from 0x00000000def6a998 to 0x00000000def6a9d0.
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Hewlett-Packard 550-001nf/2B2C, BIOS 80.06 04/01/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FF0000000 write-back
[ 0.000000] 2 base 0210000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0218000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 021C000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 021E000000 mask 7FFF000000 write-back
[ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] total RAM covered: 8176M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [ffffa307000fd810]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffffa30700097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0xd0c51000, 0xd0c51fff] PGTABLE
[ 0.000000] BRK [0xd0c52000, 0xd0c52fff] PGTABLE
[ 0.000000] BRK [0xd0c53000, 0xd0c53fff] PGTABLE
[ 0.000000] BRK [0xd0c54000, 0xd0c54fff] PGTABLE
[ 0.000000] BRK [0xd0c55000, 0xd0c55fff] PGTABLE
[ 0.000000] BRK [0xd0c56000, 0xd0c56fff] PGTABLE
[ 0.000000] BRK [0xd0c57000, 0xd0c57fff] PGTABLE
[ 0.000000] BRK [0xd0c58000, 0xd0c58fff] PGTABLE
[ 0.000000] BRK [0xd0c59000, 0xd0c59fff] PGTABLE
[ 0.000000] BRK [0xd0c5a000, 0xd0c5afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x32488000-0x3523bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000DDDE6000 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000DDDE6080 000084 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DDDFA6E0 00010C (v05 HPQOEM SLIC-CPC 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DDDE6198 014547 (v02 HPQOEM SLIC-CPC 00000000 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000DDF57F80 000040
[ 0.000000] ACPI: APIC 0x00000000DDDFA7F0 000072 (v03 HPQOEM SLIC-CPC 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DDDFA868 000044 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000DDDFA8B0 00009C (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013)
[ 0.000000] ACPI: MSDM 0x00000000DDDFA950 000055 (v03 HPQOEM SLIC-CPC 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000DDDFA9A8 000539 (v01 HPQOEM SLIC-CPC 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DDDFAEE8 000AD8 (v01 HPQOEM SLIC-CPC 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000DDDFB9C0 00003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DDDFBA00 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DDDFBA38 00036D (v01 HPQOEM SLIC-CPC 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DDDFBDA8 003013 (v01 HPQOEM SLIC-CPC 00003000 INTL 20091112)
[ 0.000000] ACPI: DBGP 0x00000000DDDFEDC0 000034 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21eff9000-0x21effdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ccf36fff]
[ 0.000000] node 0: [mem 0x00000000ccf3e000-0x00000000cd09cfff]
[ 0.000000] node 0: [mem 0x00000000cd891000-0x00000000cd8c7fff]
[ 0.000000] node 0: [mem 0x00000000cdba9000-0x00000000ddd47fff]
[ 0.000000] node 0: [mem 0x00000000defff000-0x00000000deffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.000000] On node 0 totalpages: 2081290
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14090 pages used for memmap
[ 0.000000] DMA32 zone: 901741 pages, LIFO batch:31
[ 0.000000] Normal zone: 18368 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccf37000-0xccf3dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd09d000-0xcd890fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd8c8000-0xcdba8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddd48000-0xddddffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddde0000-0xdddfefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdddff000-0xddf57fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddf58000-0xdef6bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdef6c000-0xdeffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffffa3091ec00000 s107544 r8192 d31720 u524288
[ 0.000000] pcpu-alloc: s107544 r8192 d31720 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2048742
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-27-generic root=UUID=6eb18627-5245-4e5d-998e-05baabae28ca ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7862816K/8325160K available (8847K kernel code, 1427K rwdata, 3804K rodata, 1548K init, 1400K bss, 462344K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] tsc: Detected 3691.375 MHz processor
[ 0.000015] Calibrating delay loop (skipped), value calculated using timer frequency.. 7382.75 BogoMIPS (lpj=14765500)
[ 0.000016] pid_max: default: 32768 minimum: 301
[ 0.000022] ACPI: Core revision 20160422
[ 0.009155] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.009315] Security Framework initialized
[ 0.009315] Yama: becoming mindful.
[ 0.009325] AppArmor: AppArmor initialized
[ 0.009591] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010598] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011049] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.011054] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.011239] CPU: Physical Processor ID: 0
[ 0.011239] CPU: Processor Core ID: 0
[ 0.011243] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.011243] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.011246] mce: CPU supports 7 MCE banks
[ 0.011251] CPU0: Thermal monitoring enabled (TM1)
[ 0.011259] process: using mwait in idle threads
[ 0.011261] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.011261] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.011535] Freeing SMP alternatives memory: 32K (ffffffffb22e9000 - ffffffffb22f1000)
[ 0.016279] ftrace: allocating 33403 entries in 131 pages
[ 0.026162] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.026162] smpboot: Max logical packages: 2
[ 0.026502] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.066188] TSC deadline timer enabled
[ 0.066190] smpboot: CPU0: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.066192] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.066218] ... version: 3
[ 0.066219] ... bit width: 48
[ 0.066219] ... generic registers: 4
[ 0.066219] ... value mask: 0000ffffffffffff
[ 0.066219] ... max period: 0000ffffffffffff
[ 0.066220] ... fixed-purpose events: 3
[ 0.066220] ... event mask: 000000070000000f
[ 0.066750] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.066804] x86: Booting SMP configuration:
[ 0.066804] .... node #0, CPUs: #1 #2 #3
[ 0.074625] x86: Booted up 1 node, 4 CPUs
[ 0.074627] smpboot: Total of 4 processors activated (29531.00 BogoMIPS)
[ 0.077172] devtmpfs: initialized
[ 0.077210] x86/mm: Memory block size: 128MB
[ 0.078519] evm: security.selinux
[ 0.078519] evm: security.SMACK64
[ 0.078519] evm: security.SMACK64EXEC
[ 0.078520] evm: security.SMACK64TRANSMUTE
[ 0.078520] evm: security.SMACK64MMAP
[ 0.078520] evm: security.ima
[ 0.078520] evm: security.capability
[ 0.078555] PM: Registering ACPI NVS region [mem 0xccf37000-0xccf3dfff] (28672 bytes)
[ 0.078556] PM: Registering ACPI NVS region [mem 0xdddff000-0xddf57fff] (1413120 bytes)
[ 0.078600] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.078629] pinctrl core: initialized pinctrl subsystem
[ 0.078698] RTC time: 18:39:38, date: 11/13/16
[ 0.078752] NET: Registered protocol family 16
[ 0.098650] cpuidle: using governor ladder
[ 0.114656] cpuidle: using governor menu
[ 0.114657] PCCT header not found.
[ 0.114675] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.114676] ACPI: bus type PCI registered
[ 0.114677] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.114714] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.114715] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.114720] PCI: Using configuration type 1 for base access
[ 0.114748] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.130723] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.130724] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.130843] ACPI: Added _OSI(Module Device)
[ 0.130843] ACPI: Added _OSI(Processor Device)
[ 0.130844] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.130844] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.130963] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.134188] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.134641] ACPI: Dynamic OEM Table Load:
[ 0.134644] ACPI: SSDT 0xFFFFA30914D60400 0003D3 (v01 HPQOEM SLIC-CPC 00003001 INTL 20120711)
[ 0.135058] ACPI: Dynamic OEM Table Load:
[ 0.135061] ACPI: SSDT 0xFFFFA30914D3D000 0005AA (v01 HPQOEM SLIC-CPC 00003000 INTL 20120711)
[ 0.135484] ACPI: Dynamic OEM Table Load:
[ 0.135486] ACPI: SSDT 0xFFFFA30914DA5C00 000119 (v01 HPQOEM SLIC-CPC 00003000 INTL 20120711)
[ 0.136228] ACPI: Interpreter enabled
[ 0.136248] ACPI: (supports S0 S3 S4 S5)
[ 0.136249] ACPI: Using IOAPIC for interrupt routing
[ 0.136264] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.141170] ACPI: Power Resource [FN00] (off)
[ 0.141213] ACPI: Power Resource [FN01] (off)
[ 0.141257] ACPI: Power Resource [FN02] (off)
[ 0.141299] ACPI: Power Resource [FN03] (off)
[ 0.141340] ACPI: Power Resource [FN04] (off)
[ 0.141816] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.141819] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.142145] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.142146] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.142383] PCI host bridge to bus 0000:00
[ 0.142385] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.142385] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.142386] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.142387] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.142387] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.142388] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.142388] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.142389] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.142390] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.142394] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.142448] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.142470] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.142518] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.142564] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.142579] pci 0000:00:14.0: reg 0x10: [mem 0xf7300000-0xf730ffff 64bit]
[ 0.142626] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.142648] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.142675] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.142689] pci 0000:00:16.0: reg 0x10: [mem 0xf731a000-0xf731a00f 64bit]
[ 0.142739] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.142788] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.142803] pci 0000:00:1a.0: reg 0x10: [mem 0xf7318000-0xf73183ff]
[ 0.142869] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.142899] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.142924] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.142935] pci 0000:00:1b.0: reg 0x10: [mem 0xf7310000-0xf7313fff 64bit]
[ 0.142983] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.143006] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.143028] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.143086] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.143127] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.143153] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.143203] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.143243] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.143266] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.143316] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.143356] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.143380] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.143394] pci 0000:00:1d.0: reg 0x10: [mem 0xf7317000-0xf73173ff]
[ 0.143461] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.143491] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.143516] pci 0000:00:1f.0: [8086:8c4a] type 00 class 0x060100
[ 0.143639] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.143649] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.143655] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.143661] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.143666] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.143672] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.143678] pci 0000:00:1f.2: reg 0x24: [mem 0xf7316000-0xf73167ff]
[ 0.143705] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.143744] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.143755] pci 0000:00:1f.3: reg 0x10: [mem 0xf7315000-0xf73150ff 64bit]
[ 0.143771] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.143847] pci 0000:01:00.0: [10de:1401] type 00 class 0x030000
[ 0.143856] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.143864] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.143873] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.143878] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.143883] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.143938] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.143961] pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300
[ 0.143970] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.154683] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.154685] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.154686] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.154688] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.154731] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.154792] pci 0000:03:00.0: [10ec:8179] type 00 class 0x028000
[ 0.154808] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.154831] pci 0000:03:00.0: reg 0x18: [mem 0xf7200000-0xf7203fff 64bit]
[ 0.154921] pci 0000:03:00.0: supports D1 D2
[ 0.154922] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.154954] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.166694] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.166696] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.166699] pci 0000:00:1c.5: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.166754] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.166771] pci 0000:04:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.166796] pci 0000:04:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
[ 0.166812] pci 0000:04:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.166894] pci 0000:04:00.0: supports D1 D2
[ 0.166894] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166928] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.178700] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.178703] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.178704] pci 0000:00:1c.6: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.178708] pci 0000:00:1c.6: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.179139] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.179169] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.179197] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.179225] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.179252] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.179279] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.179307] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.179335] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.179511] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.179636] SCSI subsystem initialized
[ 0.179656] libata version 3.00 loaded.
[ 0.179680] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.179681] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.179681] vgaarb: loaded
[ 0.179682] vgaarb: bridge control possible 0000:01:00.0
[ 0.179693] ACPI: bus type USB registered
[ 0.179702] usbcore: registered new interface driver usbfs
[ 0.179706] usbcore: registered new interface driver hub
[ 0.179714] usbcore: registered new device driver usb
[ 0.183576] PCI: Using ACPI for IRQ routing
[ 0.184693] PCI: pci_cache_line_size set to 64 bytes
[ 0.184735] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.184736] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.184736] e820: reserve RAM buffer [mem 0xccf37000-0xcfffffff]
[ 0.184737] e820: reserve RAM buffer [mem 0xcd09d000-0xcfffffff]
[ 0.184738] e820: reserve RAM buffer [mem 0xcd8c8000-0xcfffffff]
[ 0.184738] e820: reserve RAM buffer [mem 0xddd48000-0xdfffffff]
[ 0.184739] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.184739] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.184797] NetLabel: Initializing
[ 0.184798] NetLabel: domain hash size = 128
[ 0.184798] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.184806] NetLabel: unlabeled traffic allowed by default
[ 0.184866] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.184869] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.186885] clocksource: Switched to clocksource hpet
[ 0.191652] VFS: Disk quotas dquot_6.6.0
[ 0.191665] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.191731] AppArmor: AppArmor Filesystem Enabled
[ 0.191765] pnp: PnP ACPI init
[ 0.191854] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.191856] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.191968] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.191969] system 00:01: [io 0xffff] has been reserved
[ 0.191970] system 00:01: [io 0xffff] has been reserved
[ 0.191970] system 00:01: [io 0xffff] has been reserved
[ 0.191971] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.191972] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.191972] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.191975] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.191976] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.191977] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.191978] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.191994] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.192022] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.192024] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.192071] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.192072] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.192112] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.192114] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.192374] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.192375] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.192376] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.192376] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.192377] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.192378] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.192379] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.192379] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.192380] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.192381] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.192382] system 00:06: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.192382] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.192383] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.192525] pnp: PnP ACPI: found 7 devices
[ 0.198227] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.198240] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.198243] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.198244] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.198256] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.198257] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.198258] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.198259] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.198259] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.198260] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.198263] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf2200000-0xf23fffff]
[ 0.198266] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2400000-0xf25fffff 64bit pref]
[ 0.198268] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.198269] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.198270] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.198272] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.198273] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.198275] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.198277] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.198280] pci 0000:00:1c.0: bridge window [mem 0xf2200000-0xf23fffff]
[ 0.198283] pci 0000:00:1c.0: bridge window [mem 0xf2400000-0xf25fffff 64bit pref]
[ 0.198288] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.198290] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.198293] pci 0000:00:1c.5: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.198299] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.198301] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.198304] pci 0000:00:1c.6: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.198306] pci 0000:00:1c.6: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.198311] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.198312] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.198312] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.198313] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.198314] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.198314] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.198315] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.198315] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
[ 0.198316] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.198317] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.198317] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.198318] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.198319] pci_bus 0000:02: resource 1 [mem 0xf2200000-0xf23fffff]
[ 0.198319] pci_bus 0000:02: resource 2 [mem 0xf2400000-0xf25fffff 64bit pref]
[ 0.198320] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.198320] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf72fffff]
[ 0.198321] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.198322] pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.198322] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.198341] NET: Registered protocol family 2
[ 0.198446] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.198520] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.198627] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.198642] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.198660] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.198695] NET: Registered protocol family 1
[ 0.246964] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.246975] PCI: CLS 64 bytes, default 64
[ 0.247001] Trying to unpack rootfs image as initramfs...
[ 0.671590] Freeing initrd memory: 46800K (ffffa30732488000 - ffffa3073523c000)
[ 0.671592] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.671594] software IO TLB [mem 0xc8f37000-0xccf37000] (64MB) mapped at [ffffa307c8f37000-ffffa307ccf36fff]
[ 0.671808] Scanning for low memory corruption every 60 seconds
[ 0.672004] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.672020] audit: initializing netlink subsys (disabled)
[ 0.672031] audit: type=2000 audit(1479062377.672:1): initialized
[ 0.672272] Initialise system trusted keyrings
[ 0.672328] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.673225] zbud: loaded
[ 0.673461] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.673578] fuse init (API version 7.25)
[ 0.673652] Key type big_key registered
[ 0.673655] Allocating IMA blacklist keyring.
[ 0.674424] Key type asymmetric registered
[ 0.674425] Asymmetric key parser 'x509' registered
[ 0.674445] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.674463] io scheduler noop registered
[ 0.674464] io scheduler deadline registered (default)
[ 0.674468] io scheduler cfq registered
[ 0.674954] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.674955] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.674955] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.674956] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
[ 0.674972] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.674975] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.674988] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.674989] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.674991] pcie_pme 0000:00:1c.5:pcie001: service driver pcie_pme loaded
[ 0.675004] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[ 0.675005] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.675008] pcie_pme 0000:00:1c.6:pcie001: service driver pcie_pme loaded
[ 0.675012] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.675020] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.675039] pciehp 0000:00:1c.0:pcie004: service driver pciehp loaded
[ 0.675042] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.675063] efifb: probing for efifb
[ 0.675071] efifb: framebuffer at 0xf1000000, using 8128k, total 8128k
[ 0.675071] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.675071] efifb: scrolling: redraw
[ 0.675072] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.675138] Console: switching to colour frame buffer device 240x67
[ 0.675153] fb0: EFI VGA frame buffer device
[ 0.675156] intel_idle: MWAIT substates: 0x42120
[ 0.675157] intel_idle: v0.4.1 model 0x3C
[ 0.675245] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.675300] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.675302] ACPI: Power Button [PWRB]
[ 0.675325] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.675326] ACPI: Power Button [PWRF]
[ 0.675737] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.675738] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.675855] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.675855] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.675872] GHES: HEST is not enabled!
[ 0.675919] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.676848] Linux agpgart interface v0.103
[ 0.678357] brd: module loaded
[ 0.679029] loop: module loaded
[ 0.679133] libphy: Fixed MDIO Bus: probed
[ 0.679133] tun: Universal TUN/TAP device driver, 1.6
[ 0.679133] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.679155] PPP generic driver version 2.4.2
[ 0.679180] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.679181] ehci-pci: EHCI PCI platform driver
[ 0.679250] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.679253] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.679261] ehci-pci 0000:00:1a.0: debug port 2
[ 0.683160] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.683168] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7318000
[ 0.698979] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.699014] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.699015] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.699016] usb usb1: Product: EHCI Host Controller
[ 0.699017] usb usb1: Manufacturer: Linux 4.8.0-27-generic ehci_hcd
[ 0.699017] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.699109] hub 1-0:1.0: USB hub found
[ 0.699112] hub 1-0:1.0: 2 ports detected
[ 0.699280] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.699283] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.699291] ehci-pci 0000:00:1d.0: debug port 2
[ 0.703179] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.703186] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7317000
[ 0.718972] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.719016] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.719018] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.719018] usb usb2: Product: EHCI Host Controller
[ 0.719019] usb usb2: Manufacturer: Linux 4.8.0-27-generic ehci_hcd
[ 0.719020] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.719113] hub 2-0:1.0: USB hub found
[ 0.719116] hub 2-0:1.0: 2 ports detected
[ 0.719207] ehci-platform: EHCI generic platform driver
[ 0.719218] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.719219] ohci-pci: OHCI PCI platform driver
[ 0.719226] ohci-platform: OHCI generic platform driver
[ 0.719230] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.719323] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.719326] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.720396] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.720399] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.720461] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.720462] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.720462] usb usb3: Product: xHCI Host Controller
[ 0.720463] usb usb3: Manufacturer: Linux 4.8.0-27-generic xhci-hcd
[ 0.720463] usb usb3: SerialNumber: 0000:00:14.0
[ 0.720527] hub 3-0:1.0: USB hub found
[ 0.720541] hub 3-0:1.0: 14 ports detected
[ 0.722297] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.722299] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.722321] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.722322] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.722323] usb usb4: Product: xHCI Host Controller
[ 0.722323] usb usb4: Manufacturer: Linux 4.8.0-27-generic xhci-hcd
[ 0.722324] usb usb4: SerialNumber: 0000:00:14.0
[ 0.722386] hub 4-0:1.0: USB hub found
[ 0.722395] hub 4-0:1.0: 6 ports detected
[ 0.723124] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.723461] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.723463] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.723546] mousedev: PS/2 mouse device common for all mice
[ 0.723628] rtc_cmos 00:02: RTC can wake from S4
[ 0.723728] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.723749] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.723752] i2c /dev entries driver
[ 0.723784] device-mapper: uevent: version 1.0.3
[ 0.723824] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 0.723827] intel_pstate: Intel P-state driver initializing
[ 0.724078] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.724082] EFI Variables Facility v0.08 2004-May-17
[ 0.733260] NET: Registered protocol family 10
[ 0.733776] NET: Registered protocol family 17
[ 0.733792] Key type dns_resolver registered
[ 0.734239] microcode: sig=0x306c3, pf=0x2, revision=0x20
[ 0.734398] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.734680] registered taskstats version 1
[ 0.734686] Loading compiled-in X.509 certificates
[ 0.738019] Loaded X.509 cert 'Build time autogenerated kernel key: 53215c7b458776554ca2158e042cc68ec4a8874b'
[ 0.738030] zswap: loaded using pool lzo/zbud
[ 0.747227] Key type trusted registered
[ 0.748138] Key type encrypted registered
[ 0.748140] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.748141] ima: No TPM chip found, activating TPM-bypass!
[ 0.748151] evm: HMAC attrs: 0x1
[ 0.748447] Magic number: 8:51:696
[ 0.748546] rtc_cmos 00:02: setting system clock to 2016-11-13 18:39:38 UTC (1479062378)
[ 0.748585] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.748585] EDD information not available.
[ 0.748629] PM: Hibernation image not present or could not be loaded.
[ 0.749295] Freeing unused kernel memory: 1548K (ffffffffb2166000 - ffffffffb22e9000)
[ 0.749296] Write protecting the kernel read-only data: 14336k
[ 0.749504] Freeing unused kernel memory: 1376K (ffffa307d02a8000 - ffffa307d0400000)
[ 0.749889] Freeing unused kernel memory: 292K (ffffa307d07b7000 - ffffa307d0800000)
[ 0.754041] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.760436] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.760475] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.760480] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.760778] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.760795] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.761376] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.761401] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.761604] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.761630] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.761655] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.776384] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.785815] nvidia: loading out-of-tree module taints kernel.
[ 0.785818] nvidia: module license 'NVIDIA' taints kernel.
[ 0.785819] Disabling lock debugging due to kernel taint
[ 0.788501] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 0.792629] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 0.792700] nvidia-nvlink: Nvlink Core is being initialized, major device number 247
[ 0.792712] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 370.28 Thu Sep 1 19:45:04 PDT 2016
[ 0.793096] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.793101] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.795866] ahci 0000:00:1f.2: version 3.0
[ 0.795997] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 0.795999] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.797587] [drm] Initialized drm 1.1.0 20060810
[ 0.803884] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffc0f340018000, 7c:05:07:93:8b:7a, XID 0c000800 IRQ 30
[ 0.803885] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.805090] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 370.28 Thu Sep 1 19:18:48 PDT 2016
[ 0.805443] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 0.807600] scsi host0: ahci
[ 0.807686] scsi host1: ahci
[ 0.807742] scsi host2: ahci
[ 0.807791] scsi host3: ahci
[ 0.807937] scsi host4: ahci
[ 0.807988] scsi host5: ahci
[ 0.808014] ata1: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316100 irq 29
[ 0.808016] ata2: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316180 irq 29
[ 0.808016] ata3: DUMMY
[ 0.808016] ata4: DUMMY
[ 0.808017] ata5: DUMMY
[ 0.808017] ata6: DUMMY
[ 0.814099] r8169 0000:04:00.0 eno1: renamed from eth0
[ 1.026976] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.050979] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.122373] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.122388] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.123628] ata1.00: ATA-9: WDC WD10EZEX-60M2NA0, 03.01A03, max UDMA/100
[ 1.123630] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.124988] ata1.00: configured for UDMA/100
[ 1.125185] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-60M 1A03 PQ: 0 ANSI: 5
[ 1.128969] ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 1.128971] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.135472] ata2.00: configured for UDMA/133
[ 1.155122] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.155126] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.155127] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.155172] sd 0:0:0:0: [sda] Write Protect is off
[ 1.155173] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.155202] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.155246] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1118 PQ: 0 ANSI: 5
[ 1.179378] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.179380] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.179625] hub 1-1:1.0: USB hub found
[ 1.179715] hub 1-1:1.0: 6 ports detected
[ 1.191005] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.191008] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.191040] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.191041] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.191059] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.207262] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.207264] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.207510] hub 2-1:1.0: USB hub found
[ 1.207607] hub 2-1:1.0: 8 ports detected
[ 1.227138] sdb: sdb1 sdb2
[ 1.227344] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.234255] sda: sda1 sda2 sda3
[ 1.234439] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.466952] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.503176] random: fast init done
[ 1.578257] usb 1-1.1: New USB device found, idVendor=1532, idProduct=0037
[ 1.578259] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.578259] usb 1-1.1: Product: Razer DeathAdder 2013
[ 1.578260] usb 1-1.1: Manufacturer: Razer
[ 1.580436] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.584406] usbcore: registered new interface driver usbhid
[ 1.584406] usbhid: USB HID core driver
[ 1.585290] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1532:0037.0001/input/input5
[ 1.585357] hid-generic 0003:1532:0037.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder 2013] on usb-0000:00:1a.0-1.1/input0
[ 1.587178] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1532:0037.0002/input/input6
[ 1.647080] hid-generic 0003:1532:0037.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:1a.0-1.1/input1
[ 1.647164] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:1532:0037.0003/input/input7
[ 1.658985] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 1.690989] tsc: Refined TSC clocksource calibration: 3691.451 MHz
[ 1.690996] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a6b9449ba6, max_idle_ns: 881590891201 ns
[ 1.707083] hid-generic 0003:1532:0037.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:1a.0-1.1/input2
[ 1.771765] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
[ 1.771766] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.771767] usb 1-1.2: Product: USB Receiver
[ 1.771768] usb 1-1.2: Manufacturer: Logitech
[ 1.783766] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input2
[ 1.858995] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
[ 1.912539] input: Logitech M215 2nd Gen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0006/0003:046D:401B.0007/input/input8
[ 1.912844] logitech-hidpp-device 0003:046D:401B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-0000:00:1a.0-1.2:1
[ 1.975307] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0153
[ 1.975309] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.975310] usb 1-1.3: Product: USB2.0-CRW
[ 1.975311] usb 1-1.3: Manufacturer: Generic
[ 1.975311] usb 1-1.3: SerialNumber: 20120926571200000
[ 1.980632] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 1.980698] scsi host6: usb-storage 1-1.3:1.0
[ 1.980717] scsi host6: runtime PM trying to activate child device host6 but parent (1-1.3:1.0) is not active
[ 1.980759] usbcore: registered new interface driver usb-storage
[ 1.981528] usbcore: registered new interface driver uas
[ 2.059000] usb 1-1.6: new full-speed USB device number 6 using ehci-pci
[ 2.087256] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.168183] usb 1-1.6: New USB device found, idVendor=0c76, idProduct=1607
[ 2.168184] usb 1-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.168185] usb 1-1.6: Product: USB Headphone Set
[ 2.169290] input: USB Headphone Set as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.3/0003:0C76:1607.0009/input/input9
[ 2.227231] hid-generic 0003:0C76:1607.0009: input,hidraw5: USB HID v1.00 Device [USB Headphone Set] on usb-0000:00:1a.0-1.6/input3
[ 2.715116] clocksource: Switched to clocksource tsc
[ 3.005605] scsi 6:0:0:0: Direct-Access Generic- SD/MMC/MS PRO 1.00 PQ: 0 ANSI: 4
[ 3.005805] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.009521] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 7.132778] input: Logitech K330 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0006/0003:046D:4016.0008/input/input10
[ 7.132980] logitech-hidpp-device 0003:046D:4016.0008: input,hidraw6: USB HID v1.11 Keyboard [Logitech K330] on usb-0000:00:1a.0-1.2:2
[ 8.344121] random: crng init done
[ 8.782205] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.907868] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 8.907961] systemd[1]: Detected architecture x86-64.
[ 8.911199] systemd[1]: Set hostname to <pc-seb>.
[ 10.893709] systemd[1]: Listening on Syslog Socket.
[ 10.893754] systemd[1]: Listening on Journal Socket (/dev/log).
[ 10.893799] systemd[1]: Listening on Journal Audit Socket.
[ 10.893812] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 10.893888] systemd[1]: Created slice User and Session Slice.
[ 10.893931] systemd[1]: Created slice System Slice.
[ 10.894008] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.886800] lp: driver loaded but no devices found
[ 11.929014] ppdev: user-space parallel port driver
[ 12.387052] f71882fg: Found f71808a chip at 0x290, revision 33
[ 12.387122] f71882fg f71882fg.656: Fan: 1 is in duty-cycle mode
[ 12.387126] f71882fg f71882fg.656: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 1
[ 12.387129] f71882fg f71882fg.656: Fan: 2 is in duty-cycle mode
[ 12.387133] f71882fg f71882fg.656: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 2
[ 16.653016] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 17.018986] systemd-journald[324]: Received request to flush runtime journal from PID 1
[ 17.262919] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.287028] wmi: Mapper loaded
[ 17.922954] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 17.922955] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 17.922956] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 17.922956] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 17.922956] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 18.326925] rtl8188ee 0000:03:00.0: enabling device (0100 -> 0103)
[ 18.334388] rtl8188ee: rtl8188ee: Power Save off (module option)
[ 18.334388] rtl8188ee: rtl8188ee: FW Power Save off (module option)
[ 18.334393] rtl8188ee: Using firmware rtlwifi/rtl8188efw.bin
[ 18.335538] snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102)
[ 18.335714] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 18.335717] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 18.371031] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 18.371198] rtlwifi: rtlwifi: wireless switch is on
[ 18.791365] AVX2 version of gcm_enc/dec engaged.
[ 18.791366] AES CTR mode by8 optimization enabled
[ 18.874616] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 18.874617] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 18.874618] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 18.874618] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 18.874619] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 18.874620] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 18.874620] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 18.883164] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 18.883197] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 18.883226] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 18.884227] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 18.909076] usbcore: registered new interface driver snd-usb-audio
[ 19.223651] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 19.223689] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 19.223719] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 19.223746] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 19.517808] kvm: disabled by bios
[ 19.555829] kvm: disabled by bios
[ 19.591809] kvm: disabled by bios
[ 19.631801] kvm: disabled by bios
[ 19.872361] intel_rapl: Found RAPL domain package
[ 19.872362] intel_rapl: Found RAPL domain core
[ 19.872364] intel_rapl: Found RAPL domain dram
[ 19.872367] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 19.872371] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ 20.708822] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20160422/dsopcode-236)
[ 20.708826] ACPI Error: Method parse/execution failed [\HWMC] (Node ffffa309160c0050), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
[ 20.708830] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffffa309160c1c58), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
[ 20.708851] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20160422/dsopcode-236)
[ 20.708853] ACPI Error: Method parse/execution failed [\HWMC] (Node ffffa309160c0050), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
[ 20.708855] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffffa309160c1c58), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
[ 20.708873] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20160422/dsopcode-236)
[ 20.708875] ACPI Error: Method parse/execution failed [\HWMC] (Node ffffa309160c0050), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
[ 20.708877] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffffa309160c1c58), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
[ 20.708910] input: HP WMI hotkeys as /devices/virtual/input/input19
[ 20.708989] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20160422/dsopcode-236)
[ 20.708991] ACPI Error: Method parse/execution failed [\HWMC] (Node ffffa309160c0050), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
[ 20.708994] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffffa309160c1c58), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
[ 20.709012] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20160422/dsopcode-236)
[ 20.709013] ACPI Error: Method parse/execution failed [\HWMC] (Node ffffa309160c0050), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
[ 20.709016] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffffa309160c1c58), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
[ 21.006233] rtl8188ee 0000:03:00.0 wlp3s0: renamed from wlan0
[ 21.300818] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 244
[ 21.639422] ata1.00: request sense failed stat 50 emask 0
[ 22.783743] NVRM: Your system is not currently configured to drive a VGA console
[ 22.783744] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 22.783744] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 22.783745] NVRM: drivers including, but not limited to, vesafb, may result in
[ 22.783745] NVRM: corruption and stability problems, and is not supported.
[ 25.279600] Adding 4095996k swap on /dev/sda3. Priority:-1 extents:1 across:4095996k FS
[ 28.377716] audit: type=1400 audit(1479062406.122:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=931 comm="apparmor_parser"
[ 28.595083] audit: type=1400 audit(1479062406.338:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=928 comm="apparmor_parser"
[ 28.595087] audit: type=1400 audit(1479062406.338:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=928 comm="apparmor_parser"
[ 28.595090] audit: type=1400 audit(1479062406.338:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=928 comm="apparmor_parser"
[ 28.595092] audit: type=1400 audit(1479062406.338:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=928 comm="apparmor_parser"
[ 28.686468] audit: type=1400 audit(1479062406.430:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=933 comm="apparmor_parser"
[ 28.686474] audit: type=1400 audit(1479062406.430:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=933 comm="apparmor_parser"
[ 28.691114] audit: type=1400 audit(1479062406.434:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=929 comm="apparmor_parser"
[ 28.691119] audit: type=1400 audit(1479062406.434:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=929 comm="apparmor_parser"
[ 28.691121] audit: type=1400 audit(1479062406.434:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=929 comm="apparmor_parser"
[ 29.399642] cgroup: new mount options do not match the existing superblock, will be ignored
[ 33.356058] zram: Added device: zram0
[ 33.356158] zram: Added device: zram1
[ 33.356270] zram: Added device: zram2
[ 33.356715] zram: Added device: zram3
[ 33.997079] zram0: detected capacity change from 0 to 1038274560
[ 34.062373] systemd[1]: apt-daily.timer: Adding 1h 26min 9.337374s random time.
[ 34.330265] Adding 1013936k swap on /dev/zram0. Priority:5 extents:1 across:1013936k SSFS
[ 34.330752] zram1: detected capacity change from 0 to 1038274560
[ 34.333458] Adding 1013936k swap on /dev/zram1. Priority:5 extents:1 across:1013936k SSFS
[ 34.333901] zram2: detected capacity change from 0 to 1038274560
[ 34.336495] Adding 1013936k swap on /dev/zram2. Priority:5 extents:1 across:1013936k SSFS
[ 34.336935] zram3: detected capacity change from 0 to 1038274560
[ 34.339847] Adding 1013936k swap on /dev/zram3. Priority:5 extents:1 across:1013936k SSFS
[ 40.217347] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 40.219477] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 40.430295] r8169 0000:04:00.0 eno1: link down
[ 40.430296] r8169 0000:04:00.0 eno1: link down
[ 40.430358] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 43.242633] r8169 0000:04:00.0 eno1: link up
[ 43.242649] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 45.151307] nvidia-modeset: Allocated GPU:0 (GPU-1ddc91b6-2328-2728-fb16-c7c817e9f658) @ PCI:0000:01:00.0
[ 54.525006] retire_capture_urb: 57 callbacks suppressedmerci pour ton aide 
-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10
Hors ligne
#5 Le 13/11/2016, à 20:29
- Bougron
Re : probleme de demarrage
Le contenu de la trace me semble sans problème particulier et sans point de blocage pouvant durer 90 secondes chacun
Dernière modification par Bougron (Le 14/11/2016, à 21:31)
Hors ligne
#6 Le 14/11/2016, à 14:43
- lepetit
Re : probleme de demarrage
donc selon toi, ya pas de souci ?
-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10
Hors ligne
Pages : 1