Ubuntu-fr

Bybeu

Disque dur "Aucun media" dans gnome-disk-utility. HS ?

Bonjour
J'ai le disque dur du windows d'un copain qui ne marche plus, HS d'après son dépanneur.
Il me l'a porté pour que je jette un œil. Souvent j'ai réussi à récupéré des données, mais là le disque branché en SATA ne se monte même plus dans mon ubuntu 14.04. Serait-il mort de chez mort et tout ce qui est dedans perdu ? Le but serait de récupérer ses données. J'ai collecté ces quelques infos :
Déjà l'outil "Disques" indique "Aucun media" pour ce disque dur.
Ensuite:
Un extrait du log:

[ 2483.391005] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2483.391014] ata5.00: irq_stat 0x40000001
[ 2483.391019] ata5.00: failed command: FLUSH CACHE
[ 2483.391029] ata5.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 19
[ 2483.391029]          res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 2483.391034] ata5.00: status: { DRDY ERR }
[ 2483.391038] ata5.00: error: { ABRT }
[ 2483.424566] ata5.00: configured for UDMA/133 (device error ignored)
[ 2483.424578] ata5.00: device reported invalid CHS sector 0
[ 2483.424619] end_request: I/O error, dev sdc, sector 0
[ 2483.424659] ata5: EH complete

ls /dev/disk/by-id/*  (ci-dessous mes disques habituels remplacés par des ...)    
...        ...          wwn-0x5000c5001ef815d2
...  ata-ST3750528AS_6VP2NFKJ    wwn-0x5000cca37ce23cbb
...  ...  wwn-0x5000cca37ce23cbb-part1
...  ...      wwn-0x5000cca37ce23cbb-part2
...  ...         wwn-0x5000cca37ce23cbb-part3
...                   ...  wwn-0x5000cca37ce23cbb-part4
...             wwn-0x50000f001b110412
...                wwn-0x50000f001b110412-part1

ls /dev/disk/by-uuid/
09ecdff0-44fe-437e-8063-deabc6feb00e
7323407c-7d0b-4acd-8299-c8f3787111ff
a434a28e-a4b9-4db0-b40e-b93010ed6ceb
66392631-7c4f-4773-8614-4c5ea0913890
7b9d93fc-6898-4085-8117-7f1c76fd8a28
e80baa09-5e4b-4c29-9d0b-bc265f8384f4

Mon fstab (pour exclure une mauvaise conf)

cat /etc/fstab
UUID=09ecdff0-44fe-437e-8063-deabc6feb00e /               ext4    errors=remount-ro 0       1
UUID=e80baa09-5e4b-4c29-9d0b-bc265f8384f4 /home           ext4    defaults        0       2
UUID=7323407c-7d0b-4acd-8299-c8f3787111ff /srv            ext4    defaults        0       2
UUID=7b9d93fc-6898-4085-8117-7f1c76fd8a28 /tmp            ext4    defaults        0       2
UUID=a434a28e-a4b9-4db0-b40e-b93010ed6ceb /var            ext4    defaults        0       2
UUID=66392631-7c4f-4773-8614-4c5ea0913890 none            swap    sw              0       0

sudo smartctl -a /dev/sdc 
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-110-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12
Device Model:     ST3750528AS
Serial Number:    6VP2NFKJ
LU WWN Device Id: 5 000c50 01ef815d2
Firmware Version: CC44
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sat Mar  4 17:52:16 2017 CET
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213891en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Read SMART Data failed: scsi error aborted command
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.
Read SMART Log Directory failed: scsi error aborted command
Read SMART Error Log failed: scsi error aborted command
Read SMART Self-test Log failed: scsi error aborted command
Selective Self-tests/Logging not supported

Merci pour vos conseils

Dernière modification par Bybeu (Le 05/03/2017, à 08:57)