#1 Le 06/05/2017, à 18:52
- bouhq
[Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
bonjour les ubuntuistes, voila je viens d’acquérir un nouveau acer aspire Es 135 sur lequel j'ai voulu installe ubuntu avec un live cd mais le pc plante au moment de l'installation du paquet de grub 2. En lisant la documentation sur le forum j'avoue ne pas comprendre beaucoup les solutions techniques proposées. y a t-il- un tutoriel simple qui ;e guide pas a pas pour dépasser ce problème d'installation. Merci de votre aide.
Dernière modification par bouhq (Le 08/06/2017, à 22:24)
Hors ligne
#2 Le 07/05/2017, à 17:42
- lucmars
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
En plantant grub t'indique-t-il un message d'erreur et lequel ?
Après, il se peut que ton cd-live soit défectueux (gravure et/ou image iso corrompue). T'as verifié l'iso avant de graver ?
Gaulois Matter !
Hors ligne
#3 Le 07/05/2017, à 19:54
- bouhq
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Bonsoir Lucmars, merci d'avoir accordé de l'intérêt à mon problème. Non, il n y a aucun message, ça plante, c'est tout sans aucune notification. Mais j'ai un message à l'entame de l'amorçage indiquant un problème de téléchargement de kernel dont je n'ai rien compris.
Avant le lancement de l'installation j'ai procédé à la vérification du Dvd, et il n'y a rien d'anormal.
Voilà, j'espère que tu auras du nouveau pour la solution de mon problème.
á +
Hors ligne
#4 Le 07/05/2017, à 20:16
- lucmars
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Mais j'ai un message à l'entame de l'amorçage indiquant un problème de téléchargement de kernel
Ben justement, si tu choisis "essayer sans installer", même message ?
Gaulois Matter !
Hors ligne
#5 Le 07/05/2017, à 21:25
- bouhq
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Non, après avoir choisi essayer ubuntu avant de l'installer, je ne reçois aucun message comme je te l'ai déjà dit.
Hors ligne
#6 Le 08/05/2017, à 12:47
- bouhq
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Bonjour lucmars, je dois rectifier une chose: le message concernant le problème de telechargememt de kernel je le reçois après avoir choisi l'option essayer ubuntu avant de l'installer et avant l'affichage du desktop d'ubuntu. je m'en excuse.
Hors ligne
#7 Le 09/05/2017, à 12:20
- bouhq
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
bonjour lucmars, desepere de finir l'installation d'ubuntu, j'ai essaye lubuntu sur une cle usb mais le probleme de grub 2 persiste qvec cette fois un ;essae d'erreur que voici: le paquet grub2-efi-amd64 signed n'as pas pu etre installe dans/target/. En absence du programme de demmarage GRUBm le systeme installe ne pourra pas demarrer. Qu'en penses-tu? Merci de ton aide.
N.B: j'utilise un clavier querty sur lequel je peine a saisir correctement. tu m'en excusera.
Hors ligne
#8 Le 09/05/2017, à 13:58
- malbo
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Bonjour,
Le nom de modèle que tu as indiqué dans le post #1 est "acer aspire Es 135". Ce nom de modèle n'existe pas aussi je te prie de donner le lien vers une page du web où on peut voir ton modèle (ou bien donne le nom exact et complet dans ta réponse si tu le connais).
Par ailleurs, j'ai rencontré ce souci récemment (ici) et je te conseille d'essayer d'installer en coupant l'accès à internet. Si tu es connecté en filaire (par câble Ethernet), il suffit de débrancher le câble. Si tu es connecté en WiFi, il faut couper la WiFi (tu dois avoir un bouton qui permet de le faire).
A noter que ce n'est pas suffisant de ne pas cocher la case "Télécharger les mises à jour pendant l'installation de Ubuntu" : il faut vraiment couper l'accès à internet comme j'ai expliqué.
Hors ligne
#9 Le 09/05/2017, à 19:43
- lucmars
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
@malbo
le paquet grub2-efi-amd64 signed n'as pas pu etre installe dans/target/
le fameux grub 1 à la place du grub 2 ; mais je ne croyais pas qu'il fallait faire l'installe sous la mer...ou dans un bloc de béton, sans connexion aucune.
Gaulois Matter !
Hors ligne
#10 Le 09/05/2017, à 19:47
- bouhq
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Bonsoir malbo, merci tout d'abord de ta réponse rapide. pour le nom de mon pc, effectivement il y a erreur, il s'agit de Aspire -ES 1- 533. pour le reste j'ai refait l'installation en prenant soin de couper, au préalable, le wifi à la source c'est à dire à partir du bouton du routeur, mais, encore une fois, ça a échoué.
cordialement
Hors ligne
#11 Le 09/05/2017, à 20:24
- malbo
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Je te prie de faire un rapport Bisnext (*) depuis une session live de Ubuntu (démarrage sur ta liveUSB, choix "Try Ubuntu without installing").
C'est la partie Installation, génération et publication du rapport depuis une session autonome (live) qui s'applique dans ce cas.
Hors ligne
#12 Le 10/05/2017, à 00:29
- bouhq
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Bonsoir malbo, merci pour le suivi que tu fais pour mon problème d'installation et voici le rapport que tu m'as demandé de le faire:
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.10.0-19-generic x86_64 (64 bit gcc: 6.3.0)
Desktop: LXDE (Openbox 3.6.1) dm: lightdm Distro: Ubuntu 17.04
Machine: Device: laptop System: Acer product: Aspire ES1-533 v: V1.04
Mobo: Acer model: Stego_AP v: V1.04
UEFI: Insyde v: V1.04 date: 09/07/2016
Battery BAT1: charge: 26.8 Wh 89.9% condition: 29.9/32.5 Wh (92%)
volts: 12.2/11.3
model: COMPAL 0038314234314341 status: Discharging
CPU: Dual core Intel Celeron N3350 (-MCP-) cache: 1024 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 4377
clock speeds: min/max: 800/2400 MHz 1: 1586 MHz 2: 1586 MHz
3: 2390 MHz
Memory: Array-1 capacity: 16 GB devices: 2 EC: None
Device-1: ChannelA-DIMM0 size: 2 GB speed: 1600 MHz type: DDR3
manufacturer: N/A part: N/A
Device-2: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Device-3: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Device-4: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Graphics: Card: Intel Device 5a85 bus-ID: 00:02.0 chip-ID: 8086:5a85
Display Server: X.Org 1.19.3 drivers: modesetting (unloaded: fbdev,vesa)
tty size: 1366x768@59.97hz
GLX Renderer: Mesa DRI Intel HD Graphics 500 (Broxton 2x6)
GLX Version: 3.0 Mesa 17.0.3 Direct Rendering: Yes
Audio: Card Intel Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster
driver: snd_hda_intel bus-ID: 00:0e.0 chip-ID: 8086:5a98
Sound: Advanced Linux Sound Architecture v: k4.10.0-19-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: 1000
bus-ID: 01:00.0 chip-ID: 10ec:8168
IF: enp1s0 state: down mac: <filter>
Card-2: Intel Device 24fb
driver: iwlwifi bus-ID: 02:00.0 chip-ID: 8086:24fb
IF: wlp2s0 state: up speed: N/A duplex: N/A mac: <filter>
Drives: HDD Total Size: 501.2GB (0.2% used)
ID-1: /dev/sda model: WDC_WD5000LPCX size: 500.1GB
ID-2: USB /dev/sdb model: Flash_Disk size: 1.1GB
Optical: /dev/sr0 model: HL-DT-ST DVDRAM GUE1N
rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: swap-1 size: 0.48GB used: 0.00GB (0%) fs: swap dev: /dev/zram0
label: N/A uuid: N/A
ID-2: swap-2 size: 0.48GB used: 0.00GB (0%) fs: swap dev: /dev/zram1
label: N/A uuid: N/A
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sda1 size: 0.54G
fs: FAT (32 bit) label: N/A uuid: 8B7B-58FD
ID-2: /dev/sda2 size: 499.57G
fs: ext4 label: N/A uuid: 6d1858ca-059f-4ab3-bc3d-e4e604288bb9
ID-3: /dev/sdb1 size: 0.96G
label: N/A uuid: 2017-04-12-03-27-33-00
ID-4: /dev/sdb2 size: 0.00G
fs: FAT (12 bit) label: Lubuntu 17.04 amd64 uuid: C1B1-9637
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb cdrom:[Lubuntu 17.04 _Zesty Zapus_ - Release amd64 (20170412)]/ zesty main multiverse restricted universe
deb [url]http://archive.ubuntu.com/ubuntu/[/url] zesty main restricted universe multiverse
deb [url]http://security.ubuntu.com/ubuntu/[/url] zesty-security main restricted universe multiverse
deb [url]http://archive.ubuntu.com/ubuntu/[/url] zesty-updates main restricted universe multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 5.9% command: firefox pid: 2528 mem: 303.41MB (16.6%)
2: cpu: 5.8% command: plugin-container pid: 2617 mem: 357.75MB (19.6%)
3: cpu: 0.8% command: init pid: 1 mem: 7.32MB (0.4%)
4: cpu: 0.7% command: Xorg pid: 1548 mem: 53.92MB (2.9%)
5: cpu: 0.4% command: bash pid: 16467 mem: 4.35MB (0.2%)
6: cpu: 0.2% command: lxpanel pid: 1692 mem: 29.38MB (1.6%)
7: cpu: 0.2% daemon: ~irq/205-iwlwifi~ pid: 1297 mem: 0.00MB (0.0%)
8: cpu: 0.1% command: sudo pid: 16466 mem: 4.36MB (0.2%)
9: cpu: 0.1% command: lxterminal pid: 2749 mem: 25.82MB (1.4%)
10: cpu: 0.1% command: nm-applet pid: 1713 mem: 57.09MB (3.1%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 357.75MB (19.6%) command: plugin-container pid: 2617 cpu: 5.8%
2: mem: 303.41MB (16.6%) command: firefox pid: 2528 cpu: 5.9%
3: mem: 57.09MB (3.1%) command: nm-applet pid: 1713 cpu: 0.1%
4: mem: 53.92MB (2.9%) command: Xorg pid: 1548 cpu: 0.7%
5: mem: 29.38MB (1.6%) command: lxpanel pid: 1692 cpu: 0.2%
6: mem: 29.18MB (1.6%) command: update-notifier pid: 1704 cpu: 0.0%
7: mem: 25.82MB (1.4%) command: lxterminal pid: 2749 cpu: 0.1%
8: mem: 24.05MB (1.3%) command: pcmanfm pid: 1698 cpu: 0.0%
9: mem: 22.78MB (1.2%) command: xfce4-power-manager pid: 1709 cpu: 0.0%
10: mem: 19.20MB (1.0%) command: openbox pid: 1687 cpu: 0.0%
Info: Processes: 162 Uptime: 32 min Memory: 775.2/1822.2MB
Init: systemd v: 232 runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.4.51 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,2003,2001,2002
Boot0000* Unknown Device: HD(1,GPT,ad5428c6-6a67-4159-bc6e-caf4c63dcaea,0x800,0x100000)/File(\EFI\ubuntu\grubx64.efi)RC
Boot0001* Linux HD(1,MBR,0x4294967173,0x1c4fa0,0x1200)/File(\EFI\Boot\grubx64.efi)RC
Boot0002* Network Boot-IPV4: FC-45-96-2C-5B-2C PciRoot(0x0)/Pci(0x13,0x0)/Pci(0x0,0x0)/MAC(fc45962c5b2c,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)RC
Boot0003* Network Boot-IPV6: FC-45-96-2C-5B-2C PciRoot(0x0)/Pci(0x13,0x0)/Pci(0x0,0x0)/MAC(fc45962c5b2c,0)/IPv6([::]:<->[::]:,0,0)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
vfat partitions details:
/dev/sda1: UUID="8B7B-58FD" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="ad5428c6-6a67-4159-bc6e-caf4c63dcaea"
/dev/sdb2: SEC_TYPE="msdos" UUID="C1B1-9637" TYPE="vfat" PARTUUID="39cc9385-02"
__________________________________ Secure Boot ________________________________
Secure Boot active
__________________________________ OS prober ________________________________
/dev/sda2:Ubuntu 17.04 (17.04):Ubuntu:linux
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sda1:
0f08ecaaa01879b16987aeafd1fe20cc /EFI/ubuntu/fwupx64.efi
04461732d55beb15f0f29f59eca7f418 /EFI/ubuntu/grubx64.efi
========================= Boot Information Details ============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No known boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 17.04
Boot files: /etc/fstab
sdb1: __________________________________________________________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: /dev/sdb1 is already mounted or /tmp/bisnext-VtqBoLZq/sdb1 busy
sdb2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: According to the info in the boot sector, sdb2 starts
at sector 0. But according to the info from fdisk,
sdb2 starts at sector 1855392. According to the info
in the boot sector, sdb2 has 0 sectors.
Mounting failed: mount: /dev/sdb1 is already mounted or /tmp/bisnext-VtqBoLZq/sdb1 busy
mount: /dev/sdb2 is already mounted or /tmp/bisnext-VtqBoLZq/sdb2 busy
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 976,771,071 975,720,448 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1010.3 MiB, 1059323904 bytes, 2068992 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 0 1,867,775 1,867,776 0 Empty
/dev/sdb2 1,855,392 1,859,999 4,608 ef EFI (FAT-12/16/32)
/dev/sdb1 overlaps with /dev/sdb2
GUID Partition Table detected, but does not seem to be used.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 + R 0 1,867,719 1,867,720 Data partition (Windows/Linux)
/dev/sdb2 + R 1,855,392 1,859,999 4,608 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 8B7B-58FD vfat
/dev/sda2 6d1858ca-059f-4ab3-bc3d-e4e604288bb9 ext4
/dev/sdb1 2017-04-12-03-27-33-00 iso9660 Lubuntu 17.04 amd64
/dev/sdb2 C1B1-9637 vfat
/dev/zram0 b78255b9-25ab-422d-bf7b-9887da28a1d1 swap
/dev/zram1 8cde712c-b7e7-408e-b44a-f213a829db72 swap
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 May 9 21:32 ata-HL-DT-ST_DVDRAM_GUE1N_KXUG9CK4537 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 9 21:32 ata-WDC_WD5000LPCX-21VHAT0_WD-WX91E366LNNY -> ../../sda
lrwxrwxrwx 1 root root 10 May 9 21:32 ata-WDC_WD5000LPCX-21VHAT0_WD-WX91E366LNNY-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 9 21:32 ata-WDC_WD5000LPCX-21VHAT0_WD-WX91E366LNNY-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 May 9 21:32 usb-EXIGO_Flash_Disk_1409510016C29904-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 9 21:32 usb-EXIGO_Flash_Disk_1409510016C29904-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May 9 21:32 usb-EXIGO_Flash_Disk_1409510016C29904-0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 May 9 21:32 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 9 21:32 wwn-0x50014ee65c4d0b2b -> ../../sda
lrwxrwxrwx 1 root root 10 May 9 21:32 wwn-0x50014ee65c4d0b2b-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 9 21:32 wwn-0x50014ee65c4d0b2b-part2 -> ../../sda2
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sdb /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
_______________________________ Free disk space _______________________________
Filesystem Mounted on Type Size Used Avail Use% IUse%
aufs / aufs 912M 201M 712M 22% 2%
/dev/loop0 /rofs squashfs 866M 866M 0 100% 100%
/dev/sdb /cdrom iso9660 912M 912M 0 100% -
__________________________=== Boot Files Content ===___________________________
_______________________________ sda2/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=6d1858ca-059f-4ab3-bc3d-e4e604288bb9 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=8B7B-58FD /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash ---
_______________________________ Wireless Status _______________________________
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: acer-wireless: Wireless LAN
Soft blocked: no
Hard blocked: no
3: acer-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
_________________________________ USB devices __________________________________
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 004: ID 0bda:57b3 Realtek Semiconductor Corp.
Bus 001 Device 003: ID 8087:0aa7 Intel Corp.
Bus 001 Device 002: ID 0204:6025 Chipsbank Microelectronics Co., Ltd CBM2080 / CBM2090 Flash drive controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/7p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 480M
|__ Port 4: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 5: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 5: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 7: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 7: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 8: Dev 5, If 0, Class=Vendor Specific Class, Driver=rtsx_usb, 480M
______________________________ Boot-up Statistics ______________________________
Startup finished in 11.470s (firmware) + 1min 1.574s (loader) + 30.553s (kernel) + 6.086s (userspace) = 1min 49.684s
blame, first 10:
dev-sdb.device 4.767s
dev-loop0.device 4.551s
NetworkManager.service 3.666s
snapd.autoimport.service 3.339s
ModemManager.service 2.825s
dev-zram0.device 2.727s
dev-zram1.device 2.582s
accounts-daemon.service 2.111s
zram-config.service 1.538s
irqbalance.service 1.030s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @5.447s
2 multi-user.target @5.446s
3 getty.target @5.445s
4 getty@tty1.service @5.444s
5 system-getty.slice @5.442s
6 setvtrgb.service @5.427s +13ms
7 systemd-user-sessions.service @4.897s +16ms
8 network.target @4.893s
9 wpa_supplicant.service @5.639s +446ms
10 basic.target @1.026s
11 sockets.target @1.026s
12 snapd.socket @1.025s +997us
13 sysinit.target @1.022s
14 systemd-backlight@backlight:intel_backlight.service @2.042s +88ms
15 system-systemd\x2dbacklight.slice @2.040s
16 system.slice @266ms
17 -.slice @253ms
___________________________________ Modules Loaded ____________________________
Module Size Used by
8250_dw 16384 0
ac97_bus 16384 1 snd_soc_core
acer_wmi 20480 0
aesni_intel 167936 4
aes_x86_64 20480 1 aesni_intel
ahci 36864 1
arc4 16384 2
aufs 237568 2967
autofs4 40960 2
bluetooth 557056 26 btrtl,btintel,bnep,btbcm,btusb
bnep 20480 2
btbcm 16384 1 btusb
btintel 16384 1 btusb
btrfs 1093632 0
btrtl 16384 1 btusb
btusb 45056 0
ccm 20480 1
cfg80211 602112 3 iwlmvm,iwlwifi,mac80211
cmac 16384 1
coretemp 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
crypto_simd 16384 1 aesni_intel
drm 352256 6 i915,drm_kms_helper
drm_kms_helper 151552 1 i915
fb_sys_fops 16384 1 drm_kms_helper
fjes 73728 0
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
hfs 57344 0
hfsplus 106496 0
hid 114688 2 i2c_hid,hid_multitouch
hid_multitouch 20480 0
i2c_algo_bit 16384 1 i915
i2c_designware_core 20480 1 i2c_designware_platform
i2c_designware_platform 16384 0
i2c_hid 20480 0
i915 1449984 5
idma64 20480 6
input_leds 16384 0
intel_lpss 16384 1 intel_lpss_pci
intel_lpss_pci 16384 0
intel_pmc_ipc 20480 1 intel_telemetry_pltdrv
intel_powerclamp 16384 0
intel_punit_ipc 16384 1 intel_telemetry_pltdrv
intel_rapl 20480 0
intel_rapl_perf 16384 0
intel_telemetry_core 16384 1 intel_telemetry_pltdrv
intel_telemetry_pltdrv 20480 0
ip_tables 24576 0
irqbypass 16384 1 kvm
isofs 40960 1
iwlmvm 368640 0
iwlwifi 229376 1 iwlmvm
jfs 184320 0
joydev 20480 0
kvm 593920 1 kvm_intel
kvm_intel 200704 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
mac80211 782336 1 iwlmvm
mac_hid 16384 0
media 40960 2 uvcvideo,videodev
mei 102400 1 mei_me
mei_me 40960 0
memstick 16384 1 rtsx_usb_ms
mii 16384 1 r8169
minix 36864 0
msdos 20480 0
nls_iso8859_1 16384 0
nls_utf8 16384 1
ntfs 102400 0
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 0
pcbc 16384 0
pinctrl_broxton 40960 0
pinctrl_intel 20480 1 pinctrl_broxton
ppdev 20480 0
qnx4 16384 0
r8169 81920 0
raid6_pq 114688 1 btrfs
rtsx_usb 20480 2 rtsx_usb_sdmmc,rtsx_usb_ms
rtsx_usb_ms 20480 0
rtsx_usb_sdmmc 28672 0
sdhci 45056 1 sdhci_pci
sdhci_pci 28672 0
serio_raw 16384 0
shpchp 36864 0
snd 77824 16 snd_compress,snd_hda_intel,snd_hwdep,snd_hda_codec,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek,snd_soc_core,snd_pcm
snd_compress 20480 1 snd_soc_core
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 49152 1
snd_hda_codec_realtek 90112 1
snd_hda_core 81920 7 snd_hda_intel,snd_hda_codec,snd_hda_ext_core,snd_soc_skl,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_ext_core 24576 1 snd_soc_skl
snd_hda_intel 36864 3
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 102400 8 snd_hda_intel,snd_hda_codec,snd_pcm_dmaengine,snd_hda_ext_core,snd_hda_core,snd_soc_skl,snd_hda_codec_hdmi,snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_soc_core 233472 1 snd_soc_skl
snd_soc_skl 65536 0
snd_soc_skl_ipc 49152 1 snd_soc_skl
snd_soc_sst_dsp 28672 1 snd_soc_skl_ipc
snd_soc_sst_ipc 16384 1 snd_soc_skl_ipc
snd_soc_sst_match 16384 1 snd_soc_skl
snd_timer 32768 1 snd_pcm
soundcore 16384 1 snd
sparse_keymap 16384 1 acer_wmi
spi_pxa2xx_platform 24576 0
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
tpm_crb 16384 0
uas 24576 0
ufs 73728 0
usb_storage 69632 2 uas
uvcvideo 90112 0
video 40960 2 acer_wmi,i915
videobuf2_core 40960 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 172032 3 uvcvideo,videobuf2_core,videobuf2_v4l2
virt_dma 16384 1 idma64
wmi 16384 1 acer_wmi
x86_pkg_temp_thermal 16384 0
xfs 1187840 0
xor 24576 1 btrfs
x_tables 36864 1 ip_tables
zram 24576 2
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=en_US.UTF-8
LANGUAGE=
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="en_US.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="us"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
Live Session
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 48 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.10.0.19.21
linux-headers-4.10.0-19 4.10.0-19.21
linux-headers-4.10.0-19-generic 4.10.0-19.21
linux-headers-generic 4.10.0.19.21
linux-image-4.10.0-19-generic 4.10.0-19.21
linux-image-extra-4.10.0-19-generic 4.10.0-19.21
linux-image-generic 4.10.0.19.21
linux-signed-generic 4.10.0.19.21
linux-signed-image-4.10.0-19-generic 4.10.0-19.21
linux-signed-image-generic 4.10.0.19.21
File list in /boot directory:
abi-4.10.0-19-generic
config-4.10.0-19-generic
grub
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-19-generic
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.50 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x7affe014 ESRT=0x78866b98 SMBIOS=0x78865000 SMBIOS 3.0=0x78863000 PROP=0x66b74258
[ 0.000000] ACPI: UEFI 0x000000007AFFA000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.000000] ACPI: UEFI 0x000000007AFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.183751] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.183904] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.460987] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.586748] pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[ 0.599166] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[ 0.690011] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.690763] SCSI subsystem initialized
[ 0.691378] Registered efivars operations
[ 0.843228] pci 0000:00:15.0: xHCI BIOS handoff failed (BIOS bug ?) 00012201
[ 15.915759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 15.917123] efifb: probing for efifb
[ 15.917149] efifb: framebuffer at 0x80000000, using 4128k, total 4128k
[ 15.917152] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 15.917153] efifb: scrolling: redraw
[ 15.917156] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 15.932300] fb0: EFI VGA frame buffer device
[ 15.961907] EFI Variables Facility v0.08 2004-May-17
[ 15.987087] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.builtin_trusted_keys'
[ 15.987121] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.builtin_trusted_keys'
[ 15.987143] EFI: Loaded cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5' linked to '.builtin_trusted_keys'
[ 15.987146] EFI: Problem loading in-kernel X.509 certificate (-65)
[ 15.987191] EFI: Problem loading in-kernel X.509 certificate (-65)
[ 15.991028] EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.builtin_trusted_keys'
[ 15.991382] EFI: Loaded cert 'Acer Database Forbidden: 9de028a2638669f109745d3e2a7ad5c9e64ed392' linked to '.system_blacklist_keyring'
[ 16.296818] fb: switching to inteldrmfb from EFI VGA
[ 16.317150] [drm] GuC firmware load skipped
[ 16.527131] scsi host0: ahci
[ 16.527706] scsi host1: ahci
[ 17.001870] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 17.009866] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 17.258016] scsi host2: usb-storage 1-4:1.0
[ 18.066404] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPCX-2 1A01 PQ: 0 ANSI: 5
[ 18.098200] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.098382] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 18.100712] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE1N 1.00 PQ: 0 ANSI: 5
[ 18.131751] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 18.132042] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 18.132127] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 18.286821] scsi 2:0:0:0: Direct-Access EXIGO Flash Disk 5.00 PQ: 0 ANSI: 2
[ 18.287636] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 18.287812] sd 2:0:0:0: [sdb] 2068992 512-byte logical blocks: (1.06 GB/1010 MiB)
[ 18.290651] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 19.921076] sd 0:0:0:0: [sda] Attached SCSI disk
[ 34.631428] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-3168-26.ucode failed with error -2
[ 34.631499] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-3168-25.ucode failed with error -2
[ 34.631547] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-3168-24.ucode failed with error -2
[ 34.631593] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-3168-23.ucode failed with error -2
[ 34.697691] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
[ 34.951213] iwlwifi 0000:02:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[ 35.013143] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 35.905618] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
[ 144.487896] wlp2s0: RX AssocResp from 14:b9:68:37:0b:a4 (capab=0x431 status=0 aid=1)
_____________________________________ Xorg ____________________________________
xrandr:
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
eDP-1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 59.97*+
1360x768 59.80 59.96
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
960x600 60.00
960x540 59.99
800x600 60.00 60.32 56.25
840x525 60.01 59.88
800x512 60.17
700x525 59.98
640x512 60.02
720x450 59.89
640x480 60.00 59.94
680x384 59.80 59.96
576x432 60.06
512x384 60.00
400x300 60.32 56.34
320x240 60.05
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-2 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.687] (==) No Layout section. Using the first Screen section.
[ 36.687] (==) No screen section available. Using defaults.
[ 36.687] (**) |-->Screen "Default Screen Section" (0)
[ 36.687] (**) | |-->Monitor "<default monitor>"
[ 36.687] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 36.727] (--) PCI:*(0:0:2:0) 8086:5a85:1025:1084 rev 11, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x00002000/64, BIOS @ 0x????????/131072
[ 36.727] (II) LoadModule: "glx"
[ 36.740] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 36.899] (II) LoadModule: "modesetting"
[ 36.899] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 36.917] (II) LoadModule: "fbdev"
[ 36.917] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 36.917] (II) LoadModule: "vesa"
[ 36.917] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 36.958] (WW) Falling back to old probe method for fbdev
[ 36.958] (II) Loading sub module "fbdevhw"
[ 36.958] (II) LoadModule: "fbdevhw"
[ 36.958] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 36.960] (WW) Falling back to old probe method for vesa
[ 36.960] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 36.960] (II) Loading sub module "glamoregl"
[ 36.960] (II) LoadModule: "glamoregl"
[ 36.961] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 37.542] (II) modeset(0): Output eDP-1 has no monitor section
[ 37.552] (II) modeset(0): Output HDMI-1 has no monitor section
[ 37.554] (II) modeset(0): Output DP-1 has no monitor section
[ 37.740] (II) modeset(0): Output HDMI-2 has no monitor section
[ 37.940] (II) Loading sub module "fb"
[ 37.940] (II) LoadModule: "fb"
[ 37.940] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 37.942] (II) UnloadModule: "fbdev"
[ 37.942] (II) UnloadModule: "vesa"
[ 38.086] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 38.092] (II) modeset(0): Setting screen physical size to 361 x 203
[ 38.274] (II) LoadModule: "libinput"
[ 38.274] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 38.414] (II) LoadModule: "synaptics"
[ 38.414] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 38.624] (II) UnloadModule: "synaptics"
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-19-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-19-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:5a85
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-eDP-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
I couldn't open /var/lib/ubuntu-drivers-common/last_gfx_boot for reading.
Create /var/lib/ubuntu-drivers-common/last_gfx_boot for the 1st time
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? Yes
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
System configuration has changed
Single card detected
Nothing to do
No change - nothing to do
==============================================================================
# System Information for Ubuntu 17.04 in /dev/sda2
==============================================================================
_____________________________ Upgradable Packages _____________________________
No data available.
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.10.0.19.21
linux-headers-4.10.0-19 4.10.0-19.21
linux-headers-4.10.0-19-generic 4.10.0-19.21
linux-headers-generic 4.10.0.19.21
linux-image-4.10.0-19-generic 4.10.0-19.21
linux-image-extra-4.10.0-19-generic 4.10.0-19.21
linux-image-generic 4.10.0.19.21
linux-signed-generic 4.10.0.19.21
linux-signed-image-4.10.0-19-generic 4.10.0-19.21
linux-signed-image-generic 4.10.0.19.21
File list in /boot directory:
abi-4.10.0-19-generic
config-4.10.0-19-generic
efi
grub
initrd.img-4.10.0-19-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-19-generic
vmlinuz-4.10.0-19-generic
vmlinuz-4.10.0-19-generic.efi.signed
__________________________________ Locales ___________________________________
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
BACKSPACE="guess"
_________________________________ System Logs ________________________________
Selection of relevent log entries:
None
_____________________________________ Xorg ____________________________________
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-19-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue Mobile
Device Model: WDC WD5000LPCX-21VHAT0
LU WWN Device Id: 5 0014ee 65c4d0b2b
Firmware Version: 01.01A01
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue May 9 22:05:20 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 149 147 021 - 1533
4 Start_Stop_Count -O--CK 099 099 000 - 1107
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 70
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 65
191 G-Sense_Error_Rate -O--CK 098 098 000 - 2
192 Power-Off_Retract_Count -O--CK 200 200 000 - 28
193 Load_Cycle_Count -O--CK 200 200 000 - 2520
194 Temperature_Celsius -O---K 113 105 000 - 30
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
### USB disks: sdb
# Drive sdb:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-19-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]
Read Device Identity failed: scsi error unsupported field in scsi command
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
=============================== StdErr Messages ===============================
grub-probe: error: cannot find a GRUB drive for /dev/sdb1. Check your device.map.
E: Couldn't create temporary file to work with /var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_zesty-security_InRelease - mkstemp (30: Read-only file system)
E: The package lists or status file could not be parsed or opened.
Modération : merci à l'avenir d'utiliser les balises code (explications ici).
Dernière modification par cqfd93 (Le 10/05/2017, à 09:27)
Hors ligne
#13 Le 10/05/2017, à 06:35
- malbo
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Bonjour,
Je te prie de mettre le rapport Bisnext entre balises comme expliqué dans ce post deljere : https://forum.ubuntu-fr.org/viewtopic.p … #p16190961
L'examen de ton rapport montre qu'il n'y a pas de fichier de configuration de grub (pas de grub.cfg), ce qui est un grave problème. J'ai fureté sur la toile et j'en retire que le système UEFI de ton modèle Acer Aspire ES1-533 est inadapté pour installer Linux dedans. Pour y parvenir quand même, il existe une procédure chiante qui est décrite sur cette page : https://askubuntu.com/questions/862946/ … re-es1-533
C'est le post de Sladek90 du Jan 25 at 17:28 qui commence par "The problem can be solved as follows"
Dernière modification par malbo (Le 11/05/2017, à 06:18)
Hors ligne
#14 Le 10/05/2017, à 12:08
- bouhq
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Bonjour malbo, avant de m'aventurer dans la nouvelle procedure que tu as qualifiee de chiante, je voudrais te remarquer que mon pc nouvellement aqcuis contenait une distribution de linux inpus 9.3 preinstallee. Pour le rapport, j'espere avoir bien suivi la consigne de balisage, sinon je m'en excuse de ne pas avoir bien compris comment le faire.
a+
[ ]
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.10.0-19-generic x86_64 (64 bit gcc: 6.3.0)
Desktop: LXDE (Openbox 3.6.1) dm: lightdm Distro: Ubuntu 17.04
Machine: Device: laptop System: Acer product: Aspire ES1-533 v: V1.04
Mobo: Acer model: Stego_AP v: V1.04
UEFI: Insyde v: V1.04 date: 09/07/2016
Battery BAT1: charge: 26.8 Wh 89.9% condition: 29.9/32.5 Wh (92%)
volts: 12.2/11.3
model: COMPAL 0038314234314341 status: Discharging
CPU: Dual core Intel Celeron N3350 (-MCP-) cache: 1024 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 4377
clock speeds: min/max: 800/2400 MHz 1: 1586 MHz 2: 1586 MHz
3: 2390 MHz
Memory: Array-1 capacity: 16 GB devices: 2 EC: None
Device-1: ChannelA-DIMM0 size: 2 GB speed: 1600 MHz type: DDR3
manufacturer: N/A part: N/A
Device-2: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Device-3: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Device-4: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Graphics: Card: Intel Device 5a85 bus-ID: 00:02.0 chip-ID: 8086:5a85
Display Server: X.Org 1.19.3 drivers: modesetting (unloaded: fbdev,vesa)
tty size: 1366x768@59.97hz
GLX Renderer: Mesa DRI Intel HD Graphics 500 (Broxton 2x6)
GLX Version: 3.0 Mesa 17.0.3 Direct Rendering: Yes
Audio: Card Intel Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster
driver: snd_hda_intel bus-ID: 00:0e.0 chip-ID: 8086:5a98
Sound: Advanced Linux Sound Architecture v: k4.10.0-19-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: 1000
bus-ID: 01:00.0 chip-ID: 10ec:8168
IF: enp1s0 state: down mac: <filter>
Card-2: Intel Device 24fb
driver: iwlwifi bus-ID: 02:00.0 chip-ID: 8086:24fb
IF: wlp2s0 state: up speed: N/A duplex: N/A mac: <filter>
Drives: HDD Total Size: 501.2GB (0.2% used)
ID-1: /dev/sda model: WDC_WD5000LPCX size: 500.1GB
ID-2: USB /dev/sdb model: Flash_Disk size: 1.1GB
Optical: /dev/sr0 model: HL-DT-ST DVDRAM GUE1N
rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: swap-1 size: 0.48GB used: 0.00GB (0%) fs: swap dev: /dev/zram0
label: N/A uuid: N/A
ID-2: swap-2 size: 0.48GB used: 0.00GB (0%) fs: swap dev: /dev/zram1
label: N/A uuid: N/A
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sda1 size: 0.54G
fs: FAT (32 bit) label: N/A uuid: 8B7B-58FD
ID-2: /dev/sda2 size: 499.57G
fs: ext4 label: N/A uuid: 6d1858ca-059f-4ab3-bc3d-e4e604288bb9
ID-3: /dev/sdb1 size: 0.96G
label: N/A uuid: 2017-04-12-03-27-33-00
ID-4: /dev/sdb2 size: 0.00G
fs: FAT (12 bit) label: Lubuntu 17.04 amd64 uuid: C1B1-9637
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb cdrom:[Lubuntu 17.04 _Zesty Zapus_ - Release amd64 (20170412)]/ zesty main multiverse restricted universe
deb [url]http://archive.ubuntu.com/ubuntu/[/url] zesty main restricted universe multiverse
deb [url]http://security.ubuntu.com/ubuntu/[/url] zesty-security main restricted universe multiverse
deb [url]http://archive.ubuntu.com/ubuntu/[/url] zesty-updates main restricted universe multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 5.9% command: firefox pid: 2528 mem: 303.41MB (16.6%)
2: cpu: 5.8% command: plugin-container pid: 2617 mem: 357.75MB (19.6%)
3: cpu: 0.8% command: init pid: 1 mem: 7.32MB (0.4%)
4: cpu: 0.7% command: Xorg pid: 1548 mem: 53.92MB (2.9%)
5: cpu: 0.4% command: bash pid: 16467 mem: 4.35MB (0.2%)
6: cpu: 0.2% command: lxpanel pid: 1692 mem: 29.38MB (1.6%)
7: cpu: 0.2% daemon: ~irq/205-iwlwifi~ pid: 1297 mem: 0.00MB (0.0%)
8: cpu: 0.1% command: sudo pid: 16466 mem: 4.36MB (0.2%)
9: cpu: 0.1% command: lxterminal pid: 2749 mem: 25.82MB (1.4%)
10: cpu: 0.1% command: nm-applet pid: 1713 mem: 57.09MB (3.1%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 357.75MB (19.6%) command: plugin-container pid: 2617 cpu: 5.8%
2: mem: 303.41MB (16.6%) command: firefox pid: 2528 cpu: 5.9%
3: mem: 57.09MB (3.1%) command: nm-applet pid: 1713 cpu: 0.1%
4: mem: 53.92MB (2.9%) command: Xorg pid: 1548 cpu: 0.7%
5: mem: 29.38MB (1.6%) command: lxpanel pid: 1692 cpu: 0.2%
6: mem: 29.18MB (1.6%) command: update-notifier pid: 1704 cpu: 0.0%
7: mem: 25.82MB (1.4%) command: lxterminal pid: 2749 cpu: 0.1%
8: mem: 24.05MB (1.3%) command: pcmanfm pid: 1698 cpu: 0.0%
9: mem: 22.78MB (1.2%) command: xfce4-power-manager pid: 1709 cpu: 0.0%
10: mem: 19.20MB (1.0%) command: openbox pid: 1687 cpu: 0.0%
Info: Processes: 162 Uptime: 32 min Memory: 775.2/1822.2MB
Init: systemd v: 232 runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.4.51 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,2003,2001,2002
Boot0000* Unknown Device: HD(1,GPT,ad5428c6-6a67-4159-bc6e-caf4c63dcaea,0x800,0x100000)/File(\EFI\ubuntu\grubx64.efi)RC
Boot0001* Linux HD(1,MBR,0x4294967173,0x1c4fa0,0x1200)/File(\EFI\Boot\grubx64.efi)RC
Boot0002* Network Boot-IPV4: FC-45-96-2C-5B-2C PciRoot(0x0)/Pci(0x13,0x0)/Pci(0x0,0x0)/MAC(fc45962c5b2c,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)RC
Boot0003* Network Boot-IPV6: FC-45-96-2C-5B-2C PciRoot(0x0)/Pci(0x13,0x0)/Pci(0x0,0x0)/MAC(fc45962c5b2c,0)/IPv6([::]:<->[::]:,0,0)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
vfat partitions details:
/dev/sda1: UUID="8B7B-58FD" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="ad5428c6-6a67-4159-bc6e-caf4c63dcaea"
/dev/sdb2: SEC_TYPE="msdos" UUID="C1B1-9637" TYPE="vfat" PARTUUID="39cc9385-02"
__________________________________ Secure Boot ________________________________
Secure Boot active
__________________________________ OS prober ________________________________
/dev/sda2:Ubuntu 17.04 (17.04):Ubuntu:linux
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sda1:
0f08ecaaa01879b16987aeafd1fe20cc /EFI/ubuntu/fwupx64.efi
04461732d55beb15f0f29f59eca7f418 /EFI/ubuntu/grubx64.efi
========================= Boot Information Details ============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No known boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 17.04
Boot files: /etc/fstab
sdb1: __________________________________________________________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: /dev/sdb1 is already mounted or /tmp/bisnext-VtqBoLZq/sdb1 busy
sdb2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: According to the info in the boot sector, sdb2 starts
at sector 0. But according to the info from fdisk,
sdb2 starts at sector 1855392. According to the info
in the boot sector, sdb2 has 0 sectors.
Mounting failed: mount: /dev/sdb1 is already mounted or /tmp/bisnext-VtqBoLZq/sdb1 busy
mount: /dev/sdb2 is already mounted or /tmp/bisnext-VtqBoLZq/sdb2 busy
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 976,771,071 975,720,448 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1010.3 MiB, 1059323904 bytes, 2068992 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 0 1,867,775 1,867,776 0 Empty
/dev/sdb2 1,855,392 1,859,999 4,608 ef EFI (FAT-12/16/32)
/dev/sdb1 overlaps with /dev/sdb2
GUID Partition Table detected, but does not seem to be used.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 + R 0 1,867,719 1,867,720 Data partition (Windows/Linux)
/dev/sdb2 + R 1,855,392 1,859,999 4,608 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 8B7B-58FD vfat
/dev/sda2 6d1858ca-059f-4ab3-bc3d-e4e604288bb9 ext4
/dev/sdb1 2017-04-12-03-27-33-00 iso9660 Lubuntu 17.04 amd64
/dev/sdb2 C1B1-9637 vfat
/dev/zram0 b78255b9-25ab-422d-bf7b-9887da28a1d1 swap
/dev/zram1 8cde712c-b7e7-408e-b44a-f213a829db72 swap
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 May 9 21:32 ata-HL-DT-ST_DVDRAM_GUE1N_KXUG9CK4537 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 9 21:32 ata-WDC_WD5000LPCX-21VHAT0_WD-WX91E366LNNY -> ../../sda
lrwxrwxrwx 1 root root 10 May 9 21:32 ata-WDC_WD5000LPCX-21VHAT0_WD-WX91E366LNNY-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 9 21:32 ata-WDC_WD5000LPCX-21VHAT0_WD-WX91E366LNNY-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 May 9 21:32 usb-EXIGO_Flash_Disk_1409510016C29904-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 9 21:32 usb-EXIGO_Flash_Disk_1409510016C29904-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May 9 21:32 usb-EXIGO_Flash_Disk_1409510016C29904-0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 May 9 21:32 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 9 21:32 wwn-0x50014ee65c4d0b2b -> ../../sda
lrwxrwxrwx 1 root root 10 May 9 21:32 wwn-0x50014ee65c4d0b2b-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 9 21:32 wwn-0x50014ee65c4d0b2b-part2 -> ../../sda2
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sdb /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
_______________________________ Free disk space _______________________________
Filesystem Mounted on Type Size Used Avail Use% IUse%
aufs / aufs 912M 201M 712M 22% 2%
/dev/loop0 /rofs squashfs 866M 866M 0 100% 100%
/dev/sdb /cdrom iso9660 912M 912M 0 100% -
__________________________=== Boot Files Content ===___________________________
_______________________________ sda2/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=6d1858ca-059f-4ab3-bc3d-e4e604288bb9 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=8B7B-58FD /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash ---
_______________________________ Wireless Status _______________________________
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: acer-wireless: Wireless LAN
Soft blocked: no
Hard blocked: no
3: acer-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
_________________________________ USB devices __________________________________
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 004: ID 0bda:57b3 Realtek Semiconductor Corp.
Bus 001 Device 003: ID 8087:0aa7 Intel Corp.
Bus 001 Device 002: ID 0204:6025 Chipsbank Microelectronics Co., Ltd CBM2080 / CBM2090 Flash drive controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/7p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 480M
|__ Port 4: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 5: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 5: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 7: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 7: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 8: Dev 5, If 0, Class=Vendor Specific Class, Driver=rtsx_usb, 480M
______________________________ Boot-up Statistics ______________________________
Startup finished in 11.470s (firmware) + 1min 1.574s (loader) + 30.553s (kernel) + 6.086s (userspace) = 1min 49.684s
blame, first 10:
dev-sdb.device 4.767s
dev-loop0.device 4.551s
NetworkManager.service 3.666s
snapd.autoimport.service 3.339s
ModemManager.service 2.825s
dev-zram0.device 2.727s
dev-zram1.device 2.582s
accounts-daemon.service 2.111s
zram-config.service 1.538s
irqbalance.service 1.030s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @5.447s
2 multi-user.target @5.446s
3 getty.target @5.445s
4 getty@tty1.service @5.444s
5 system-getty.slice @5.442s
6 setvtrgb.service @5.427s +13ms
7 systemd-user-sessions.service @4.897s +16ms
8 network.target @4.893s
9 wpa_supplicant.service @5.639s +446ms
10 basic.target @1.026s
11 sockets.target @1.026s
12 snapd.socket @1.025s +997us
13 sysinit.target @1.022s
14 systemd-backlight@backlight:intel_backlight.service @2.042s +88ms
15 system-systemd\x2dbacklight.slice @2.040s
16 system.slice @266ms
17 -.slice @253ms
___________________________________ Modules Loaded ____________________________
Module Size Used by
8250_dw 16384 0
ac97_bus 16384 1 snd_soc_core
acer_wmi 20480 0
aesni_intel 167936 4
aes_x86_64 20480 1 aesni_intel
ahci 36864 1
arc4 16384 2
aufs 237568 2967
autofs4 40960 2
bluetooth 557056 26 btrtl,btintel,bnep,btbcm,btusb
bnep 20480 2
btbcm 16384 1 btusb
btintel 16384 1 btusb
btrfs 1093632 0
btrtl 16384 1 btusb
btusb 45056 0
ccm 20480 1
cfg80211 602112 3 iwlmvm,iwlwifi,mac80211
cmac 16384 1
coretemp 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
crypto_simd 16384 1 aesni_intel
drm 352256 6 i915,drm_kms_helper
drm_kms_helper 151552 1 i915
fb_sys_fops 16384 1 drm_kms_helper
fjes 73728 0
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
hfs 57344 0
hfsplus 106496 0
hid 114688 2 i2c_hid,hid_multitouch
hid_multitouch 20480 0
i2c_algo_bit 16384 1 i915
i2c_designware_core 20480 1 i2c_designware_platform
i2c_designware_platform 16384 0
i2c_hid 20480 0
i915 1449984 5
idma64 20480 6
input_leds 16384 0
intel_lpss 16384 1 intel_lpss_pci
intel_lpss_pci 16384 0
intel_pmc_ipc 20480 1 intel_telemetry_pltdrv
intel_powerclamp 16384 0
intel_punit_ipc 16384 1 intel_telemetry_pltdrv
intel_rapl 20480 0
intel_rapl_perf 16384 0
intel_telemetry_core 16384 1 intel_telemetry_pltdrv
intel_telemetry_pltdrv 20480 0
ip_tables 24576 0
irqbypass 16384 1 kvm
isofs 40960 1
iwlmvm 368640 0
iwlwifi 229376 1 iwlmvm
jfs 184320 0
joydev 20480 0
kvm 593920 1 kvm_intel
kvm_intel 200704 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
mac80211 782336 1 iwlmvm
mac_hid 16384 0
media 40960 2 uvcvideo,videodev
mei 102400 1 mei_me
mei_me 40960 0
memstick 16384 1 rtsx_usb_ms
mii 16384 1 r8169
minix 36864 0
msdos 20480 0
nls_iso8859_1 16384 0
nls_utf8 16384 1
ntfs 102400 0
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 0
pcbc 16384 0
pinctrl_broxton 40960 0
pinctrl_intel 20480 1 pinctrl_broxton
ppdev 20480 0
qnx4 16384 0
r8169 81920 0
raid6_pq 114688 1 btrfs
rtsx_usb 20480 2 rtsx_usb_sdmmc,rtsx_usb_ms
rtsx_usb_ms 20480 0
rtsx_usb_sdmmc 28672 0
sdhci 45056 1 sdhci_pci
sdhci_pci 28672 0
serio_raw 16384 0
shpchp 36864 0
snd 77824 16 snd_compress,snd_hda_intel,snd_hwdep,snd_hda_codec,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek,snd_soc_core,snd_pcm
snd_compress 20480 1 snd_soc_core
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 49152 1
snd_hda_codec_realtek 90112 1
snd_hda_core 81920 7 snd_hda_intel,snd_hda_codec,snd_hda_ext_core,snd_soc_skl,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_ext_core 24576 1 snd_soc_skl
snd_hda_intel 36864 3
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 102400 8 snd_hda_intel,snd_hda_codec,snd_pcm_dmaengine,snd_hda_ext_core,snd_hda_core,snd_soc_skl,snd_hda_codec_hdmi,snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_soc_core 233472 1 snd_soc_skl
snd_soc_skl 65536 0
snd_soc_skl_ipc 49152 1 snd_soc_skl
snd_soc_sst_dsp 28672 1 snd_soc_skl_ipc
snd_soc_sst_ipc 16384 1 snd_soc_skl_ipc
snd_soc_sst_match 16384 1 snd_soc_skl
snd_timer 32768 1 snd_pcm
soundcore 16384 1 snd
sparse_keymap 16384 1 acer_wmi
spi_pxa2xx_platform 24576 0
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
tpm_crb 16384 0
uas 24576 0
ufs 73728 0
usb_storage 69632 2 uas
uvcvideo 90112 0
video 40960 2 acer_wmi,i915
videobuf2_core 40960 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 172032 3 uvcvideo,videobuf2_core,videobuf2_v4l2
virt_dma 16384 1 idma64
wmi 16384 1 acer_wmi
x86_pkg_temp_thermal 16384 0
xfs 1187840 0
xor 24576 1 btrfs
x_tables 36864 1 ip_tables
zram 24576 2
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=en_US.UTF-8
LANGUAGE=
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="en_US.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="us"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
Live Session
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 48 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.10.0.19.21
linux-headers-4.10.0-19 4.10.0-19.21
linux-headers-4.10.0-19-generic 4.10.0-19.21
linux-headers-generic 4.10.0.19.21
linux-image-4.10.0-19-generic 4.10.0-19.21
linux-image-extra-4.10.0-19-generic 4.10.0-19.21
linux-image-generic 4.10.0.19.21
linux-signed-generic 4.10.0.19.21
linux-signed-image-4.10.0-19-generic 4.10.0-19.21
linux-signed-image-generic 4.10.0.19.21
File list in /boot directory:
abi-4.10.0-19-generic
config-4.10.0-19-generic
grub
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-19-generic
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.50 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x7affe014 ESRT=0x78866b98 SMBIOS=0x78865000 SMBIOS 3.0=0x78863000 PROP=0x66b74258
[ 0.000000] ACPI: UEFI 0x000000007AFFA000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.000000] ACPI: UEFI 0x000000007AFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.183751] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.183904] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.460987] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.586748] pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[ 0.599166] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[ 0.690011] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.690763] SCSI subsystem initialized
[ 0.691378] Registered efivars operations
[ 0.843228] pci 0000:00:15.0: xHCI BIOS handoff failed (BIOS bug ?) 00012201
[ 15.915759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 15.917123] efifb: probing for efifb
[ 15.917149] efifb: framebuffer at 0x80000000, using 4128k, total 4128k
[ 15.917152] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 15.917153] efifb: scrolling: redraw
[ 15.917156] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 15.932300] fb0: EFI VGA frame buffer device
[ 15.961907] EFI Variables Facility v0.08 2004-May-17
[ 15.987087] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.builtin_trusted_keys'
[ 15.987121] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.builtin_trusted_keys'
[ 15.987143] EFI: Loaded cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5' linked to '.builtin_trusted_keys'
[ 15.987146] EFI: Problem loading in-kernel X.509 certificate (-65)
[ 15.987191] EFI: Problem loading in-kernel X.509 certificate (-65)
[ 15.991028] EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.builtin_trusted_keys'
[ 15.991382] EFI: Loaded cert 'Acer Database Forbidden: 9de028a2638669f109745d3e2a7ad5c9e64ed392' linked to '.system_blacklist_keyring'
[ 16.296818] fb: switching to inteldrmfb from EFI VGA
[ 16.317150] [drm] GuC firmware load skipped
[ 16.527131] scsi host0: ahci
[ 16.527706] scsi host1: ahci
[ 17.001870] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 17.009866] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 17.258016] scsi host2: usb-storage 1-4:1.0
[ 18.066404] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPCX-2 1A01 PQ: 0 ANSI: 5
[ 18.098200] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.098382] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 18.100712] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE1N 1.00 PQ: 0 ANSI: 5
[ 18.131751] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 18.132042] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 18.132127] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 18.286821] scsi 2:0:0:0: Direct-Access EXIGO Flash Disk 5.00 PQ: 0 ANSI: 2
[ 18.287636] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 18.287812] sd 2:0:0:0: [sdb] 2068992 512-byte logical blocks: (1.06 GB/1010 MiB)
[ 18.290651] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 19.921076] sd 0:0:0:0: [sda] Attached SCSI disk
[ 34.631428] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-3168-26.ucode failed with error -2
[ 34.631499] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-3168-25.ucode failed with error -2
[ 34.631547] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-3168-24.ucode failed with error -2
[ 34.631593] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-3168-23.ucode failed with error -2
[ 34.697691] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
[ 34.951213] iwlwifi 0000:02:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[ 35.013143] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 35.905618] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
[ 144.487896] wlp2s0: RX AssocResp from 14:b9:68:37:0b:a4 (capab=0x431 status=0 aid=1)
_____________________________________ Xorg ____________________________________
xrandr:
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
eDP-1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 59.97*+
1360x768 59.80 59.96
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
960x600 60.00
960x540 59.99
800x600 60.00 60.32 56.25
840x525 60.01 59.88
800x512 60.17
700x525 59.98
640x512 60.02
720x450 59.89
640x480 60.00 59.94
680x384 59.80 59.96
576x432 60.06
512x384 60.00
400x300 60.32 56.34
320x240 60.05
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-2 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.687] (==) No Layout section. Using the first Screen section.
[ 36.687] (==) No screen section available. Using defaults.
[ 36.687] (**) |-->Screen "Default Screen Section" (0)
[ 36.687] (**) | |-->Monitor "<default monitor>"
[ 36.687] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 36.727] (--) PCI:*(0:0:2:0) 8086:5a85:1025:1084 rev 11, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x00002000/64, BIOS @ 0x????????/131072
[ 36.727] (II) LoadModule: "glx"
[ 36.740] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 36.899] (II) LoadModule: "modesetting"
[ 36.899] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 36.917] (II) LoadModule: "fbdev"
[ 36.917] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 36.917] (II) LoadModule: "vesa"
[ 36.917] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 36.958] (WW) Falling back to old probe method for fbdev
[ 36.958] (II) Loading sub module "fbdevhw"
[ 36.958] (II) LoadModule: "fbdevhw"
[ 36.958] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 36.960] (WW) Falling back to old probe method for vesa
[ 36.960] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 36.960] (II) Loading sub module "glamoregl"
[ 36.960] (II) LoadModule: "glamoregl"
[ 36.961] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 37.542] (II) modeset(0): Output eDP-1 has no monitor section
[ 37.552] (II) modeset(0): Output HDMI-1 has no monitor section
[ 37.554] (II) modeset(0): Output DP-1 has no monitor section
[ 37.740] (II) modeset(0): Output HDMI-2 has no monitor section
[ 37.940] (II) Loading sub module "fb"
[ 37.940] (II) LoadModule: "fb"
[ 37.940] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 37.942] (II) UnloadModule: "fbdev"
[ 37.942] (II) UnloadModule: "vesa"
[ 38.086] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 38.092] (II) modeset(0): Setting screen physical size to 361 x 203
[ 38.274] (II) LoadModule: "libinput"
[ 38.274] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 38.414] (II) LoadModule: "synaptics"
[ 38.414] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 38.624] (II) UnloadModule: "synaptics"
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-19-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-19-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:5a85
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-eDP-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
I couldn't open /var/lib/ubuntu-drivers-common/last_gfx_boot for reading.
Create /var/lib/ubuntu-drivers-common/last_gfx_boot for the 1st time
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? Yes
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
System configuration has changed
Single card detected
Nothing to do
No change - nothing to do
==============================================================================
# System Information for Ubuntu 17.04 in /dev/sda2
==============================================================================
_____________________________ Upgradable Packages _____________________________
No data available.
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.10.0.19.21
linux-headers-4.10.0-19 4.10.0-19.21
linux-headers-4.10.0-19-generic 4.10.0-19.21
linux-headers-generic 4.10.0.19.21
linux-image-4.10.0-19-generic 4.10.0-19.21
linux-image-extra-4.10.0-19-generic 4.10.0-19.21
linux-image-generic 4.10.0.19.21
linux-signed-generic 4.10.0.19.21
linux-signed-image-4.10.0-19-generic 4.10.0-19.21
linux-signed-image-generic 4.10.0.19.21
File list in /boot directory:
abi-4.10.0-19-generic
config-4.10.0-19-generic
efi
grub
initrd.img-4.10.0-19-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-19-generic
vmlinuz-4.10.0-19-generic
vmlinuz-4.10.0-19-generic.efi.signed
__________________________________ Locales ___________________________________
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
BACKSPACE="guess"
_________________________________ System Logs ________________________________
Selection of relevent log entries:
None
_____________________________________ Xorg ____________________________________
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-19-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue Mobile
Device Model: WDC WD5000LPCX-21VHAT0
LU WWN Device Id: 5 0014ee 65c4d0b2b
Firmware Version: 01.01A01
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue May 9 22:05:20 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 149 147 021 - 1533
4 Start_Stop_Count -O--CK 099 099 000 - 1107
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 70
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 65
191 G-Sense_Error_Rate -O--CK 098 098 000 - 2
192 Power-Off_Retract_Count -O--CK 200 200 000 - 28
193 Load_Cycle_Count -O--CK 200 200 000 - 2520
194 Temperature_Celsius -O---K 113 105 000 - 30
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
### USB disks: sdb
# Drive sdb:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-19-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]
Read Device Identity failed: scsi error unsupported field in scsi command
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
=============================== StdErr Messages ===============================
grub-probe: error: cannot find a GRUB drive for /dev/sdb1. Check your device.map.
E: Couldn't create temporary file to work with /var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_zesty-security_InRelease - mkstemp (30: Read-only file system)
E: The package lists or status file could not be parsed or opened.
[ ]
Dernière modification par cqfd93 (Le 13/05/2017, à 08:11)
Hors ligne
#15 Le 10/05/2017, à 19:46
- bouhq
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
bonsoir malbo, j'ai essaye la procedure 2 decrite dans le lien '' https://askubuntu.com/questions/862946/ … re-es1-533'', mais le resultat n'etait pas probant. tout sembler bien aller au debut mais:
- a l'etape 6= do you want to continue? en repondant par y , la ligne de commande affiche '' abort ''
- a l'etape 7= change root to/mnt and update grub sudo unable to resolve host lubunto: connection refused
sudo- update-grub: command not found
Apres le reboot, a l'etape 8, l'ecran affiche '' secure boot failed''.
voila, la galere continue
Hors ligne
#16 Le 11/05/2017, à 06:29
- malbo
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Je crois que tu n'as pas accès à internet depuis ta session live. Peux-tu confirmer ?
Peux-tu te connecter par liaison filaire (Ethernet) provisoirement et vérifier que tu peux bien avoir l'accès à internet par ce moyen ?
EDIT : dans ton post #14, comme tu n'as pas compris comment mettre ton rapport entre balises, je viens de me fendre de ce fil : [Résolu] Mettre rapport Bisnext entre balises
Je te prie d'utiliser les explications que j'y donne pour modifier ton post #14 et lui mettre les balises.
Dernière modification par malbo (Le 11/05/2017, à 08:39)
Hors ligne
#17 Le 11/05/2017, à 10:58
- bouhq
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Bonjour malbo, je ne sais pas qu'est ce qui te laisse dire cela mais j'ai toujours eu acces a internet depuis ma session live. Pour le balisage du rapport, voila, c'est fait.
a+
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.10.0-19-generic x86_64 (64 bit gcc: 6.3.0)
Desktop: LXDE (Openbox 3.6.1) dm: lightdm Distro: Ubuntu 17.04
Machine: Device: laptop System: Acer product: Aspire ES1-533 v: V1.04
Mobo: Acer model: Stego_AP v: V1.04
UEFI: Insyde v: V1.04 date: 09/07/2016
Battery BAT1: charge: 26.8 Wh 89.9% condition: 29.9/32.5 Wh (92%)
volts: 12.2/11.3
model: COMPAL 0038314234314341 status: Discharging
CPU: Dual core Intel Celeron N3350 (-MCP-) cache: 1024 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 4377
clock speeds: min/max: 800/2400 MHz 1: 1586 MHz 2: 1586 MHz
3: 2390 MHz
Memory: Array-1 capacity: 16 GB devices: 2 EC: None
Device-1: ChannelA-DIMM0 size: 2 GB speed: 1600 MHz type: DDR3
manufacturer: N/A part: N/A
Device-2: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Device-3: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Device-4: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Graphics: Card: Intel Device 5a85 bus-ID: 00:02.0 chip-ID: 8086:5a85
Display Server: X.Org 1.19.3 drivers: modesetting (unloaded: fbdev,vesa)
tty size: 1366x768@59.97hz
GLX Renderer: Mesa DRI Intel HD Graphics 500 (Broxton 2x6)
GLX Version: 3.0 Mesa 17.0.3 Direct Rendering: Yes
Audio: Card Intel Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster
driver: snd_hda_intel bus-ID: 00:0e.0 chip-ID: 8086:5a98
Sound: Advanced Linux Sound Architecture v: k4.10.0-19-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: 1000
bus-ID: 01:00.0 chip-ID: 10ec:8168
IF: enp1s0 state: down mac: <filter>
Card-2: Intel Device 24fb
driver: iwlwifi bus-ID: 02:00.0 chip-ID: 8086:24fb
IF: wlp2s0 state: up speed: N/A duplex: N/A mac: <filter>
Drives: HDD Total Size: 501.2GB (0.2% used)
ID-1: /dev/sda model: WDC_WD5000LPCX size: 500.1GB
ID-2: USB /dev/sdb model: Flash_Disk size: 1.1GB
Optical: /dev/sr0 model: HL-DT-ST DVDRAM GUE1N
rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: swap-1 size: 0.48GB used: 0.00GB (0%) fs: swap dev: /dev/zram0
label: N/A uuid: N/A
ID-2: swap-2 size: 0.48GB used: 0.00GB (0%) fs: swap dev: /dev/zram1
label: N/A uuid: N/A
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sda1 size: 0.54G
fs: FAT (32 bit) label: N/A uuid: 8B7B-58FD
ID-2: /dev/sda2 size: 499.57G
fs: ext4 label: N/A uuid: 6d1858ca-059f-4ab3-bc3d-e4e604288bb9
ID-3: /dev/sdb1 size: 0.96G
label: N/A uuid: 2017-04-12-03-27-33-00
ID-4: /dev/sdb2 size: 0.00G
fs: FAT (12 bit) label: Lubuntu 17.04 amd64 uuid: C1B1-9637
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb cdrom:[Lubuntu 17.04 _Zesty Zapus_ - Release amd64 (20170412)]/ zesty main multiverse restricted universe
deb http://archive.ubuntu.com/ubuntu/ zesty main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu/ zesty-security main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu/ zesty-updates main restricted universe multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 5.9% command: firefox pid: 2528 mem: 303.41MB (16.6%)
2: cpu: 5.8% command: plugin-container pid: 2617 mem: 357.75MB (19.6%)
3: cpu: 0.8% command: init pid: 1 mem: 7.32MB (0.4%)
4: cpu: 0.7% command: Xorg pid: 1548 mem: 53.92MB (2.9%)
5: cpu: 0.4% command: bash pid: 16467 mem: 4.35MB (0.2%)
6: cpu: 0.2% command: lxpanel pid: 1692 mem: 29.38MB (1.6%)
7: cpu: 0.2% daemon: ~irq/205-iwlwifi~ pid: 1297 mem: 0.00MB (0.0%)
8: cpu: 0.1% command: sudo pid: 16466 mem: 4.36MB (0.2%)
9: cpu: 0.1% command: lxterminal pid: 2749 mem: 25.82MB (1.4%)
10: cpu: 0.1% command: nm-applet pid: 1713 mem: 57.09MB (3.1%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 357.75MB (19.6%) command: plugin-container pid: 2617 cpu: 5.8%
2: mem: 303.41MB (16.6%) command: firefox pid: 2528 cpu: 5.9%
3: mem: 57.09MB (3.1%) command: nm-applet pid: 1713 cpu: 0.1%
4: mem: 53.92MB (2.9%) command: Xorg pid: 1548 cpu: 0.7%
5: mem: 29.38MB (1.6%) command: lxpanel pid: 1692 cpu: 0.2%
6: mem: 29.18MB (1.6%) command: update-notifier pid: 1704 cpu: 0.0%
7: mem: 25.82MB (1.4%) command: lxterminal pid: 2749 cpu: 0.1%
8: mem: 24.05MB (1.3%) command: pcmanfm pid: 1698 cpu: 0.0%
9: mem: 22.78MB (1.2%) command: xfce4-power-manager pid: 1709 cpu: 0.0%
10: mem: 19.20MB (1.0%) command: openbox pid: 1687 cpu: 0.0%
Info: Processes: 162 Uptime: 32 min Memory: 775.2/1822.2MB
Init: systemd v: 232 runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.4.51 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,2003,2001,2002
Boot0000* Unknown Device: HD(1,GPT,ad5428c6-6a67-4159-bc6e-caf4c63dcaea,0x800,0x100000)/File(\EFI\ubuntu\grubx64.efi)RC
Boot0001* Linux HD(1,MBR,0x4294967173,0x1c4fa0,0x1200)/File(\EFI\Boot\grubx64.efi)RC
Boot0002* Network Boot-IPV4: FC-45-96-2C-5B-2C PciRoot(0x0)/Pci(0x13,0x0)/Pci(0x0,0x0)/MAC(fc45962c5b2c,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)RC
Boot0003* Network Boot-IPV6: FC-45-96-2C-5B-2C PciRoot(0x0)/Pci(0x13,0x0)/Pci(0x0,0x0)/MAC(fc45962c5b2c,0)/IPv6([::]:<->[::]:,0,0)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
vfat partitions details:
/dev/sda1: UUID="8B7B-58FD" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="ad5428c6-6a67-4159-bc6e-caf4c63dcaea"
/dev/sdb2: SEC_TYPE="msdos" UUID="C1B1-9637" TYPE="vfat" PARTUUID="39cc9385-02"
__________________________________ Secure Boot ________________________________
Secure Boot active
__________________________________ OS prober ________________________________
/dev/sda2:Ubuntu 17.04 (17.04):Ubuntu:linux
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sda1:
0f08ecaaa01879b16987aeafd1fe20cc /EFI/ubuntu/fwupx64.efi
04461732d55beb15f0f29f59eca7f418 /EFI/ubuntu/grubx64.efi
========================= Boot Information Details ============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No known boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 17.04
Boot files: /etc/fstab
sdb1: __________________________________________________________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: /dev/sdb1 is already mounted or /tmp/bisnext-VtqBoLZq/sdb1 busy
sdb2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: According to the info in the boot sector, sdb2 starts
at sector 0. But according to the info from fdisk,
sdb2 starts at sector 1855392. According to the info
in the boot sector, sdb2 has 0 sectors.
Mounting failed: mount: /dev/sdb1 is already mounted or /tmp/bisnext-VtqBoLZq/sdb1 busy
mount: /dev/sdb2 is already mounted or /tmp/bisnext-VtqBoLZq/sdb2 busy
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 976,771,071 975,720,448 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1010.3 MiB, 1059323904 bytes, 2068992 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 0 1,867,775 1,867,776 0 Empty
/dev/sdb2 1,855,392 1,859,999 4,608 ef EFI (FAT-12/16/32)
/dev/sdb1 overlaps with /dev/sdb2
GUID Partition Table detected, but does not seem to be used.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 + R 0 1,867,719 1,867,720 Data partition (Windows/Linux)
/dev/sdb2 + R 1,855,392 1,859,999 4,608 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 8B7B-58FD vfat
/dev/sda2 6d1858ca-059f-4ab3-bc3d-e4e604288bb9 ext4
/dev/sdb1 2017-04-12-03-27-33-00 iso9660 Lubuntu 17.04 amd64
/dev/sdb2 C1B1-9637 vfat
/dev/zram0 b78255b9-25ab-422d-bf7b-9887da28a1d1 swap
/dev/zram1 8cde712c-b7e7-408e-b44a-f213a829db72 swap
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 May 9 21:32 ata-HL-DT-ST_DVDRAM_GUE1N_KXUG9CK4537 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 9 21:32 ata-WDC_WD5000LPCX-21VHAT0_WD-WX91E366LNNY -> ../../sda
lrwxrwxrwx 1 root root 10 May 9 21:32 ata-WDC_WD5000LPCX-21VHAT0_WD-WX91E366LNNY-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 9 21:32 ata-WDC_WD5000LPCX-21VHAT0_WD-WX91E366LNNY-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 May 9 21:32 usb-EXIGO_Flash_Disk_1409510016C29904-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 9 21:32 usb-EXIGO_Flash_Disk_1409510016C29904-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May 9 21:32 usb-EXIGO_Flash_Disk_1409510016C29904-0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 May 9 21:32 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 9 21:32 wwn-0x50014ee65c4d0b2b -> ../../sda
lrwxrwxrwx 1 root root 10 May 9 21:32 wwn-0x50014ee65c4d0b2b-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 9 21:32 wwn-0x50014ee65c4d0b2b-part2 -> ../../sda2
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sdb /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
_______________________________ Free disk space _______________________________
Filesystem Mounted on Type Size Used Avail Use% IUse%
aufs / aufs 912M 201M 712M 22% 2%
/dev/loop0 /rofs squashfs 866M 866M 0 100% 100%
/dev/sdb /cdrom iso9660 912M 912M 0 100% -
__________________________=== Boot Files Content ===___________________________
_______________________________ sda2/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=6d1858ca-059f-4ab3-bc3d-e4e604288bb9 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=8B7B-58FD /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash ---
_______________________________ Wireless Status _______________________________
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: acer-wireless: Wireless LAN
Soft blocked: no
Hard blocked: no
3: acer-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
_________________________________ USB devices __________________________________
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 004: ID 0bda:57b3 Realtek Semiconductor Corp.
Bus 001 Device 003: ID 8087:0aa7 Intel Corp.
Bus 001 Device 002: ID 0204:6025 Chipsbank Microelectronics Co., Ltd CBM2080 / CBM2090 Flash drive controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/7p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 480M
|__ Port 4: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 5: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 5: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 7: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 7: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 8: Dev 5, If 0, Class=Vendor Specific Class, Driver=rtsx_usb, 480M
______________________________ Boot-up Statistics ______________________________
Startup finished in 11.470s (firmware) + 1min 1.574s (loader) + 30.553s (kernel) + 6.086s (userspace) = 1min 49.684s
blame, first 10:
dev-sdb.device 4.767s
dev-loop0.device 4.551s
NetworkManager.service 3.666s
snapd.autoimport.service 3.339s
ModemManager.service 2.825s
dev-zram0.device 2.727s
dev-zram1.device 2.582s
accounts-daemon.service 2.111s
zram-config.service 1.538s
irqbalance.service 1.030s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @5.447s
2 multi-user.target @5.446s
3 getty.target @5.445s
4 getty@tty1.service @5.444s
5 system-getty.slice @5.442s
6 setvtrgb.service @5.427s +13ms
7 systemd-user-sessions.service @4.897s +16ms
8 network.target @4.893s
9 wpa_supplicant.service @5.639s +446ms
10 basic.target @1.026s
11 sockets.target @1.026s
12 snapd.socket @1.025s +997us
13 sysinit.target @1.022s
14 systemd-backlight@backlight:intel_backlight.service @2.042s +88ms
15 system-systemd\x2dbacklight.slice @2.040s
16 system.slice @266ms
17 -.slice @253ms
___________________________________ Modules Loaded ____________________________
Module Size Used by
8250_dw 16384 0
ac97_bus 16384 1 snd_soc_core
acer_wmi 20480 0
aesni_intel 167936 4
aes_x86_64 20480 1 aesni_intel
ahci 36864 1
arc4 16384 2
aufs 237568 2967
autofs4 40960 2
bluetooth 557056 26 btrtl,btintel,bnep,btbcm,btusb
bnep 20480 2
btbcm 16384 1 btusb
btintel 16384 1 btusb
btrfs 1093632 0
btrtl 16384 1 btusb
btusb 45056 0
ccm 20480 1
cfg80211 602112 3 iwlmvm,iwlwifi,mac80211
cmac 16384 1
coretemp 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
crypto_simd 16384 1 aesni_intel
drm 352256 6 i915,drm_kms_helper
drm_kms_helper 151552 1 i915
fb_sys_fops 16384 1 drm_kms_helper
fjes 73728 0
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
hfs 57344 0
hfsplus 106496 0
hid 114688 2 i2c_hid,hid_multitouch
hid_multitouch 20480 0
i2c_algo_bit 16384 1 i915
i2c_designware_core 20480 1 i2c_designware_platform
i2c_designware_platform 16384 0
i2c_hid 20480 0
i915 1449984 5
idma64 20480 6
input_leds 16384 0
intel_lpss 16384 1 intel_lpss_pci
intel_lpss_pci 16384 0
intel_pmc_ipc 20480 1 intel_telemetry_pltdrv
intel_powerclamp 16384 0
intel_punit_ipc 16384 1 intel_telemetry_pltdrv
intel_rapl 20480 0
intel_rapl_perf 16384 0
intel_telemetry_core 16384 1 intel_telemetry_pltdrv
intel_telemetry_pltdrv 20480 0
ip_tables 24576 0
irqbypass 16384 1 kvm
isofs 40960 1
iwlmvm 368640 0
iwlwifi 229376 1 iwlmvm
jfs 184320 0
joydev 20480 0
kvm 593920 1 kvm_intel
kvm_intel 200704 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
mac80211 782336 1 iwlmvm
mac_hid 16384 0
media 40960 2 uvcvideo,videodev
mei 102400 1 mei_me
mei_me 40960 0
memstick 16384 1 rtsx_usb_ms
mii 16384 1 r8169
minix 36864 0
msdos 20480 0
nls_iso8859_1 16384 0
nls_utf8 16384 1
ntfs 102400 0
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 0
pcbc 16384 0
pinctrl_broxton 40960 0
pinctrl_intel 20480 1 pinctrl_broxton
ppdev 20480 0
qnx4 16384 0
r8169 81920 0
raid6_pq 114688 1 btrfs
rtsx_usb 20480 2 rtsx_usb_sdmmc,rtsx_usb_ms
rtsx_usb_ms 20480 0
rtsx_usb_sdmmc 28672 0
sdhci 45056 1 sdhci_pci
sdhci_pci 28672 0
serio_raw 16384 0
shpchp 36864 0
snd 77824 16 snd_compress,snd_hda_intel,snd_hwdep,snd_hda_codec,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek,snd_soc_core,snd_pcm
snd_compress 20480 1 snd_soc_core
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 49152 1
snd_hda_codec_realtek 90112 1
snd_hda_core 81920 7 snd_hda_intel,snd_hda_codec,snd_hda_ext_core,snd_soc_skl,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_ext_core 24576 1 snd_soc_skl
snd_hda_intel 36864 3
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 102400 8 snd_hda_intel,snd_hda_codec,snd_pcm_dmaengine,snd_hda_ext_core,snd_hda_core,snd_soc_skl,snd_hda_codec_hdmi,snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_soc_core 233472 1 snd_soc_skl
snd_soc_skl 65536 0
snd_soc_skl_ipc 49152 1 snd_soc_skl
snd_soc_sst_dsp 28672 1 snd_soc_skl_ipc
snd_soc_sst_ipc 16384 1 snd_soc_skl_ipc
snd_soc_sst_match 16384 1 snd_soc_skl
snd_timer 32768 1 snd_pcm
soundcore 16384 1 snd
sparse_keymap 16384 1 acer_wmi
spi_pxa2xx_platform 24576 0
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
tpm_crb 16384 0
uas 24576 0
ufs 73728 0
usb_storage 69632 2 uas
uvcvideo 90112 0
video 40960 2 acer_wmi,i915
videobuf2_core 40960 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 172032 3 uvcvideo,videobuf2_core,videobuf2_v4l2
virt_dma 16384 1 idma64
wmi 16384 1 acer_wmi
x86_pkg_temp_thermal 16384 0
xfs 1187840 0
xor 24576 1 btrfs
x_tables 36864 1 ip_tables
zram 24576 2
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=en_US.UTF-8
LANGUAGE=
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="en_US.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="us"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
Live Session
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 48 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.10.0.19.21
linux-headers-4.10.0-19 4.10.0-19.21
linux-headers-4.10.0-19-generic 4.10.0-19.21
linux-headers-generic 4.10.0.19.21
linux-image-4.10.0-19-generic 4.10.0-19.21
linux-image-extra-4.10.0-19-generic 4.10.0-19.21
linux-image-generic 4.10.0.19.21
linux-signed-generic 4.10.0.19.21
linux-signed-image-4.10.0-19-generic 4.10.0-19.21
linux-signed-image-generic 4.10.0.19.21
File list in /boot directory:
abi-4.10.0-19-generic
config-4.10.0-19-generic
grub
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-19-generic
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.50 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x7affe014 ESRT=0x78866b98 SMBIOS=0x78865000 SMBIOS 3.0=0x78863000 PROP=0x66b74258
[ 0.000000] ACPI: UEFI 0x000000007AFFA000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.000000] ACPI: UEFI 0x000000007AFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.183751] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.183904] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.460987] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.586748] pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[ 0.599166] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[ 0.690011] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.690763] SCSI subsystem initialized
[ 0.691378] Registered efivars operations
[ 0.843228] pci 0000:00:15.0: xHCI BIOS handoff failed (BIOS bug ?) 00012201
[ 15.915759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 15.917123] efifb: probing for efifb
[ 15.917149] efifb: framebuffer at 0x80000000, using 4128k, total 4128k
[ 15.917152] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 15.917153] efifb: scrolling: redraw
[ 15.917156] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 15.932300] fb0: EFI VGA frame buffer device
[ 15.961907] EFI Variables Facility v0.08 2004-May-17
[ 15.987087] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.builtin_trusted_keys'
[ 15.987121] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.builtin_trusted_keys'
[ 15.987143] EFI: Loaded cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5' linked to '.builtin_trusted_keys'
[ 15.987146] EFI: Problem loading in-kernel X.509 certificate (-65)
[ 15.987191] EFI: Problem loading in-kernel X.509 certificate (-65)
[ 15.991028] EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.builtin_trusted_keys'
[ 15.991382] EFI: Loaded cert 'Acer Database Forbidden: 9de028a2638669f109745d3e2a7ad5c9e64ed392' linked to '.system_blacklist_keyring'
[ 16.296818] fb: switching to inteldrmfb from EFI VGA
[ 16.317150] [drm] GuC firmware load skipped
[ 16.527131] scsi host0: ahci
[ 16.527706] scsi host1: ahci
[ 17.001870] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 17.009866] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 17.258016] scsi host2: usb-storage 1-4:1.0
[ 18.066404] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPCX-2 1A01 PQ: 0 ANSI: 5
[ 18.098200] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.098382] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 18.100712] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE1N 1.00 PQ: 0 ANSI: 5
[ 18.131751] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 18.132042] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 18.132127] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 18.286821] scsi 2:0:0:0: Direct-Access EXIGO Flash Disk 5.00 PQ: 0 ANSI: 2
[ 18.287636] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 18.287812] sd 2:0:0:0: [sdb] 2068992 512-byte logical blocks: (1.06 GB/1010 MiB)
[ 18.290651] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 19.921076] sd 0:0:0:0: [sda] Attached SCSI disk
[ 34.631428] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-3168-26.ucode failed with error -2
[ 34.631499] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-3168-25.ucode failed with error -2
[ 34.631547] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-3168-24.ucode failed with error -2
[ 34.631593] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-3168-23.ucode failed with error -2
[ 34.697691] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
[ 34.951213] iwlwifi 0000:02:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[ 35.013143] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 35.905618] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
[ 144.487896] wlp2s0: RX AssocResp from 14:b9:68:37:0b:a4 (capab=0x431 status=0 aid=1)
_____________________________________ Xorg ____________________________________
xrandr:
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
eDP-1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 59.97*+
1360x768 59.80 59.96
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
960x600 60.00
960x540 59.99
800x600 60.00 60.32 56.25
840x525 60.01 59.88
800x512 60.17
700x525 59.98
640x512 60.02
720x450 59.89
640x480 60.00 59.94
680x384 59.80 59.96
576x432 60.06
512x384 60.00
400x300 60.32 56.34
320x240 60.05
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-2 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.687] (==) No Layout section. Using the first Screen section.
[ 36.687] (==) No screen section available. Using defaults.
[ 36.687] (**) |-->Screen "Default Screen Section" (0)
[ 36.687] (**) | |-->Monitor "<default monitor>"
[ 36.687] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 36.727] (--) PCI:*(0:0:2:0) 8086:5a85:1025:1084 rev 11, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x00002000/64, BIOS @ 0x????????/131072
[ 36.727] (II) LoadModule: "glx"
[ 36.740] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 36.899] (II) LoadModule: "modesetting"
[ 36.899] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 36.917] (II) LoadModule: "fbdev"
[ 36.917] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 36.917] (II) LoadModule: "vesa"
[ 36.917] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 36.958] (WW) Falling back to old probe method for fbdev
[ 36.958] (II) Loading sub module "fbdevhw"
[ 36.958] (II) LoadModule: "fbdevhw"
[ 36.958] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 36.960] (WW) Falling back to old probe method for vesa
[ 36.960] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 36.960] (II) Loading sub module "glamoregl"
[ 36.960] (II) LoadModule: "glamoregl"
[ 36.961] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 37.542] (II) modeset(0): Output eDP-1 has no monitor section
[ 37.552] (II) modeset(0): Output HDMI-1 has no monitor section
[ 37.554] (II) modeset(0): Output DP-1 has no monitor section
[ 37.740] (II) modeset(0): Output HDMI-2 has no monitor section
[ 37.940] (II) Loading sub module "fb"
[ 37.940] (II) LoadModule: "fb"
[ 37.940] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 37.942] (II) UnloadModule: "fbdev"
[ 37.942] (II) UnloadModule: "vesa"
[ 38.086] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 38.092] (II) modeset(0): Setting screen physical size to 361 x 203
[ 38.274] (II) LoadModule: "libinput"
[ 38.274] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 38.414] (II) LoadModule: "synaptics"
[ 38.414] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 38.624] (II) UnloadModule: "synaptics"
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-19-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-19-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:5a85
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-eDP-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
I couldn't open /var/lib/ubuntu-drivers-common/last_gfx_boot for reading.
Create /var/lib/ubuntu-drivers-common/last_gfx_boot for the 1st time
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? Yes
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
System configuration has changed
Single card detected
Nothing to do
No change - nothing to do
==============================================================================
# System Information for Ubuntu 17.04 in /dev/sda2
==============================================================================
_____________________________ Upgradable Packages _____________________________
No data available.
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.10.0.19.21
linux-headers-4.10.0-19 4.10.0-19.21
linux-headers-4.10.0-19-generic 4.10.0-19.21
linux-headers-generic 4.10.0.19.21
linux-image-4.10.0-19-generic 4.10.0-19.21
linux-image-extra-4.10.0-19-generic 4.10.0-19.21
linux-image-generic 4.10.0.19.21
linux-signed-generic 4.10.0.19.21
linux-signed-image-4.10.0-19-generic 4.10.0-19.21
linux-signed-image-generic 4.10.0.19.21
File list in /boot directory:
abi-4.10.0-19-generic
config-4.10.0-19-generic
efi
grub
initrd.img-4.10.0-19-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-19-generic
vmlinuz-4.10.0-19-generic
vmlinuz-4.10.0-19-generic.efi.signed
__________________________________ Locales ___________________________________
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
BACKSPACE="guess"
_________________________________ System Logs ________________________________
Selection of relevent log entries:
None
_____________________________________ Xorg ____________________________________
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-19-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue Mobile
Device Model: WDC WD5000LPCX-21VHAT0
LU WWN Device Id: 5 0014ee 65c4d0b2b
Firmware Version: 01.01A01
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue May 9 22:05:20 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 149 147 021 - 1533
4 Start_Stop_Count -O--CK 099 099 000 - 1107
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 70
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 65
191 G-Sense_Error_Rate -O--CK 098 098 000 - 2
192 Power-Off_Retract_Count -O--CK 200 200 000 - 28
193 Load_Cycle_Count -O--CK 200 200 000 - 2520
194 Temperature_Celsius -O---K 113 105 000 - 30
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
### USB disks: sdb
# Drive sdb:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-19-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
=============================== StdErr Messages ===============================
grub-probe: error: cannot find a GRUB drive for /dev/sdb1. Check your device.map.
E: Couldn't create temporary file to work with /var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_zesty-security_InRelease - mkstemp (30: Read-only file system)
E: The package lists or status file could not be parsed or opened.
Hors ligne
#18 Le 11/05/2017, à 13:10
- malbo
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Bonjour malbo, je ne sais pas qu'est ce qui te laisse dire cela mais j'ai toujours eu acces a internet depuis ma session live
Tu as raison, je faisais une erreur de raisonnement. Si tu n'avais pas eu accès à internet en session live, tu n'aurais pas pu télécharger Bisnext. Mais du coup je ne sais pas pourquoi ça bloque à l'étape 6 comme tu l'as mentionné dans le post #15. Je ne sais pas quoi te proposer.
Dernière modification par malbo (Le 11/05/2017, à 13:12)
Hors ligne
#19 Le 11/05/2017, à 19:57
- bouhq
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Bonsoir malbo, en désespoir de cause j'ai fait une nouvelle tentative en suivant les consignes proposées par Pueseso et trouvées dans ce lien, '' acer community discussion''
Re: Acer Aspire ES 15 (ES1-533-C3UW): Legacy BIOS Missing
Hi
I have successfully installed Ubuntu 16.04.1 in my laptop ES1-533-C6C1 following Sladek90 advise.
The only drawback is that it is horribly slow (probably becouse of some bug, have tried a Live-USB with MINT and it was OK...
This is the full tested process:
-- Boot Ubuntu Live USB
-- open terminal
sudo -s
ubiquity -b
-- Press Continue testing after installation is over.
--Now we will return to the CLI ( https://wiki.debian.org/GrubEFIReinstall )
sudo mount /dev/sda2 /mnt #sda2 is the root partition
sudo mkdir /mnt/boot/efi
sudo mount /dev/sda1 /mnt/boot/efi #sda1 is the efi partition
for i in /dev /dev/pts /proc /sys; do sudo mount -B $i /mnt$i; done
modprobe efivars # make sure this is loaded
-- notice the bootx64 file
efibootmgr --verbose
-- We will reinstall grub-install for a 64bit version
apt-get install --reinstall grub-efi-amd64
grub-install —no-nvram —root-directory=/mnt
chroot /mnt
update-grub
cd /boot/efi/EFI
cp -R ubuntu BOOT
cd BOOT cp grubx64.efi bootx64.efi
-- You are finished, reboot the system.
Mais dans la ligne de commande, il y a eu des erreurs comme tu peux le remarquer ci- dessous
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
lubuntu@lubuntu:~$ sudo -s
root@lubuntu:~# ubiquity -b
root@lubuntu:~# sudo mount /dev/sda2 /mnt #sda2 is the root partition
root@lubuntu:~# sudo mkdir /mnt/boot/efi
mkdir: cannot create directory ‘/mnt/boot/efi’: File exists
root@lubuntu:~# sudo mount /dev/sda1 /mnt/boot/efi #sda1 is the efi partition
root@lubuntu:~# for i in /dev /dev/pts /proc /sys; do sudo mount -B $i /mnt$i; done
root@lubuntu:~# modprobe efivars # make sure this is loaded
root@lubuntu:~# efibootmgr --verbose
BootCurrent: 0004
Timeout: 0 seconds
BootOrder: 0000,0004,2003,2001,2002
Boot0000* Linux HD(1,GPT,150492b3-099e-4376-aa5e-d2bc2d5f141e,0x800,0x100000)/File(\EFI\Boot\grubx64.efi)RC
Boot0001* Unknown Device: HD(1,GPT,150492b3-099e-4376-aa5e-d2bc2d5f141e,0x800,0x100000)/File(\EFI\ubuntu\grubx64.efi)RC
Boot0002* Network Boot-IPV4: FC-45-96-2C-5B-2C PciRoot(0x0)/Pci(0x13,0x0)/Pci(0x0,0x0)/MAC(fc45962c5b2c,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)RC
Boot0003* Network Boot-IPV6: FC-45-96-2C-5B-2C PciRoot(0x0)/Pci(0x13,0x0)/Pci(0x0,0x0)/MAC(fc45962c5b2c,0)/IPv6([::]:<->[::]:,0,0)RC
Boot0004* Linux HD(1,MBR,0x4294967173,0x1c4fa0,0x1200)/File(\EFI\Boot\grubx64.efi)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
root@lubuntu:~# apt-get install --reinstall grub-efi-amd64
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
grub-efi-amd64-bin
The following packages will be REMOVED:
grub-gfxpayload-lists grub-pc
The following NEW packages will be installed:
grub-efi-amd64 grub-efi-amd64-bin
0 upgraded, 2 newly installed, 2 to remove and 0 not upgraded.
Need to get 722 kB of archives.
After this operation, 2,330 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://archive.ubuntu.com/ubuntu zesty/main amd64 grub-efi-amd64-bin amd64 2.02~beta3-4ubuntu2 [650 kB]
Get:2 http://archive.ubuntu.com/ubuntu zesty/main amd64 grub-efi-amd64 amd64 2.02~beta3-4ubuntu2 [72.4 kB]
Fetched 722 kB in 1s (414 kB/s)
Preconfiguring packages ...
(Reading database ... 114697 files and directories currently installed.)
Removing grub-gfxpayload-lists (0.7) ...
Removing grub-pc (2.02~beta3-4ubuntu2) ...
Selecting previously unselected package grub-efi-amd64-bin.
(Reading database ... 114677 files and directories currently installed.)
Preparing to unpack .../grub-efi-amd64-bin_2.02~beta3-4ubuntu2_amd64.deb ...
Unpacking grub-efi-amd64-bin (2.02~beta3-4ubuntu2) ...
Selecting previously unselected package grub-efi-amd64.
Preparing to unpack .../grub-efi-amd64_2.02~beta3-4ubuntu2_amd64.deb ...
Unpacking grub-efi-amd64 (2.02~beta3-4ubuntu2) ...
Setting up grub-efi-amd64-bin (2.02~beta3-4ubuntu2) ...
Setting up grub-efi-amd64 (2.02~beta3-4ubuntu2) ...
Processing triggers for man-db (2.7.6.1-2) ...
root@lubuntu:~# grub-install —no-nvram —root-directory=/mnt
grub-install: error: More than one install device?.
root@lubuntu:~# chroot /mnt
root@lubuntu:/# update-grub
The program 'update-grub' is currently not installed. You can install it by typing:
apt install grub2-common
root@lubuntu:/# apt install grub2-common
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
grub-common os-prober
Suggested packages:
multiboot-doc grub-emu xorriso desktop-base
The following NEW packages will be installed:
grub-common grub2-common os-prober
0 upgraded, 3 newly installed, 0 to remove and 42 not upgraded.
Need to get 2,310 kB of archives.
After this operation, 13.6 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Err:1 http://tn.archive.ubuntu.com/ubuntu zesty/main amd64 grub-common amd64 2.02~beta3-4ubuntu2
Temporary failure resolving 'tn.archive.ubuntu.com'
Err:2 http://tn.archive.ubuntu.com/ubuntu zesty/main amd64 grub2-common amd64 2.02~beta3-4ubuntu2
Temporary failure resolving 'tn.archive.ubuntu.com'
Err:3 http://tn.archive.ubuntu.com/ubuntu zesty/main amd64 os-prober amd64 1.74ubuntu1
Temporary failure resolving 'tn.archive.ubuntu.com'
E: Failed to fetch http://tn.archive.ubuntu.com/ubuntu/pool/main/g/grub2/grub-common_2.02~beta3-4ubuntu2_amd64.deb Temporary failure resolving 'tn.archive.ubuntu.com'
E: Failed to fetch http://tn.archive.ubuntu.com/ubuntu/pool/main/g/grub2/grub2-common_2.02~beta3-4ubuntu2_amd64.deb Temporary failure resolving 'tn.archive.ubuntu.com'
E: Failed to fetch http://tn.archive.ubuntu.com/ubuntu/pool/main/o/os-prober/os-prober_1.74ubuntu1_amd64.deb Temporary failure resolving 'tn.archive.ubuntu.com'
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
root@lubuntu:/# cd /boot/efi/EFI
root@lubuntu:/boot/efi/EFI#
root@lubuntu:/boot/efi/EFI# cp -R ubuntu BOOT
root@lubuntu:/boot/efi/EFI# cd BOOT cp grubx64.efi bootx64.efi
bash: cd: too many arguments
root@lubuntu:/boot/efi/EFI# cd BOOT cp grubx64.efi bootx64.ef
Peux tu y décéler quelque chose qui peut aider à l'installation d'une distribution linux?
merci encore
Hors ligne
#20 Le 11/05/2017, à 20:03
- lucmars
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,2003,2001,2002
Boot0000* Unknown Device: HD(1,GPT,ad5428c6-6a67-4159-bc6e-caf4c63dcaea,0x800,0x100000)/File(\EFI\ubuntu\grubx64.efi)RC
Boot0001* Linux HD(1,MBR,0x4294967173,0x1c4fa0,0x1200)/File(\EFI\Boot\grubx64.efi)RC
Boot0002* Network Boot-IPV4: FC-45-96-2C-5B-2C PciRoot(0x0)/Pci(0x13,0x0)/Pci(0x0,0x0)/MAC(fc45962c5b2c,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)RC
Boot0003* Network Boot-IPV6: FC-45-96-2C-5B-2C PciRoot(0x0)/Pci(0x13,0x0)/Pci(0x0,0x0)/MAC(fc45962c5b2c,0)/IPv6([::]:<->[::]:,0,0)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
Selon ces lignes ci-dessus, t'aurais booter sur ton ubu installé et non via un support live, comment as-tu fais pour booter?
Gaulois Matter !
Hors ligne
#21 Le 11/05/2017, à 22:36
- bouhq
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Bonsoir lucmars, si j'ai bien compris j'ai un ubunto installe, ca doit etre le linux inscrit en premier lieu dans le listing bootable, mais dans ce cas pourquoi le boot ne se fait que si j'insert le live usb de lubunto ou le live dvd d'ubuntu. Et pourquoi lorsque j'essaie d'installer ubuntu le pc plante au moment de l'installation du paquet grub2. Comment tu peux expliquer cela?
Hors ligne
#22 Le 12/05/2017, à 10:18
- malbo
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Bonjour,
Je confirme que cette procédure de Pueseso que tu as tenté de suivre dans le post #19 ainsi que celle de Sladek90 que j'ai indiquée dans le post #13 ne fonctionnent pas. C'est l'étape "faire en sorte que l'accès à internet soit possible après le chroot " qui était absente et sans cette étape, ça ne peut pas réussir à mon avis. A ce sujet, je précise qu'il est impératif d'avoir accès à internet en session live sinon la procédure que je détaille ci-dessous ne peut pas aboutir.
J'ai fait la manip dans une machine virtuelle pour installer Ubuntu 17.04 par la méthode "sudo ubiquity -b" et je détaille tout ce que j'ai fait pour que ça fonctionne en me basant sur le début de la procédure de Sladek90 :
1) Boot sur DVD/USB de Ubuntu avec le choix "Try Ubuntu without installing" (ça s'appelle une "session live"). Arrivé dans la session live, ouvrir un terminal.
2) Dans le terminal, passer cette commande d'installation non conventionnelle (*) qui permet d'éviter le plantage de l'installateur lors de l'installation de Grub :
sudo ubiquity -b
L'installation démarre tout mollement (peut-être parce que je suis dans une machine virtuelle)
A noter : j'ai coché "Télécharger les mises à jour pendant l'installation de Ubuntu" à l'étape 2 et j'ai sélectionné "Effacer le disque et installer Ubuntu" à l'étape 3
3) A la fin de l'installation, cliquer sur le bouton "Continuer de tester".
4) Montage de la partition racine du Ubuntu fraîchement installé dans le point de montage /mnt :
sudo mount /dev/sda2 /mnt
et montage de la partition EFI dans le point de montage /mnt/boot/efi :
sudo mkdir /mnt/boot/efi
sudo mount /dev/sda1 /mnt/boot/efi
Commande qui prépare le passage en chroot :
for i in /dev /dev/pts /proc /sys; do sudo mount -B $i /mnt$i; done
5) chargement de efivars : EDIT : j'avais pompé cette commande "sudo modprobe efivars" de la procédure de Sladek90 mais en fait elle ne sert à rien. j'ai refait l'ensemble de la procédure sans la passer et ça a marché aussi bien. Tu peux la passer si tu veux, ça ne peut pas faire de mal à mon avis, c'est seulement inutile.
sudo modprobe efivars
Attention : ça change à partir d'ici par rapport à la procédure de Sladek90 (j'ai pompé une partie de la procédure trouvée ici)
6) faire en sorte que l'accès à internet soit possible après le chroot :
sudo cp /etc/resolv.conf /mnt/etc/
7) chroot dans /mnt
sudo chroot /mnt
8) install grub-efi :
apt install grub-efi
Cette simple commande fait beaucoup de boulot (on peut en voir le détail dans le post #23) :
- désinstallation du paquet grub-pc laissé dans le Ubuntu installé par le mode d'installation bizarre "sudo ubiquity -b"
- installation du paquet grub-efi
- installation des éléments de démarrage de Grub dans la partition EFI
- mise à jour du fichier de configuration de grub (grub.cfg)
9) création d'un fichier de démarrage du disque dur (bootx64.efi) qui est en fait une copie du fichier de démarrage de grub (le démarrage de cette machine est verrouillé sur bootx64.efi donc il faut ruser pour parvenir à démarrer sur Grub) :
cd /boot/efi/EFI
sudo cp -R ubuntu BOOT
cd BOOT
sudo cp grubx64.efi bootx64.efi
10) Presser les deux touches Ctrl et D pour sortir du chroot
11) Démonter l'ensemble et rebooter :
for i in /sys /proc /dev/pts /dev; do sudo umount /mnt$i; done
sudo umount /mnt/boot/efi
sudo umount /mnt
sudo reboot
(*) l'option -b pour ubiquity a bel et bien existé mais c'était il y a plus de 4 ans. Aujourd'hui, cette option -b n'est absolument pas documentée, ni dans le man de Ubiquity ni ailleurs. Il se trouve que ça fait quelque chose qui permet miraculeusement d'éviter le plantage sur un ordi Acer Aspire ES1-533 mais c'est du hors-piste pour ne pas dire de la bidouille.
Dernière modification par malbo (Le 12/05/2017, à 17:27)
Hors ligne
#23 Le 12/05/2017, à 12:08
- malbo
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Je colle les commandes et leur résultat (attention à ne pas se faire piéger en suivant juste les commandes de ce post : il faut suivre la procédure du post précédent parce qu'il y a des opérations particulières comme Ctrl+D pour quitter chroot) :
ubuntu@ubuntu:~$ sudo ubiquity -b
ubuntu@ubuntu:~$ sudo mount /dev/sda2 /mnt
ubuntu@ubuntu:~$ sudo mkdir /mnt/boot/efi
mkdir: cannot create directory ‘/mnt/boot/efi’: File exists
ubuntu@ubuntu:~$ sudo mount /dev/sda1 /mnt/boot/efi
ubuntu@ubuntu:~$ for i in /dev /dev/pts /proc /sys; do sudo mount -B $i /mnt$i; done
ubuntu@ubuntu:~$ sudo modprobe efivars
ubuntu@ubuntu:~$ sudo cp /etc/resolv.conf /mnt/etc/
ubuntu@ubuntu:~$ sudo chroot /mnt
root@ubuntu:/# apt install grub-efi
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
grub-efi-amd64 grub-efi-amd64-bin
The following packages will be REMOVED:
grub-gfxpayload-lists grub-pc
The following NEW packages will be installed:
grub-efi grub-efi-amd64 grub-efi-amd64-bin
0 upgraded, 3 newly installed, 2 to remove and 59 not upgraded.
Need to get 725 kB of archives.
After this operation, 2,346 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://fr.archive.ubuntu.com/ubuntu zesty/main amd64 grub-efi-amd64-bin amd64 2.02~beta3-4ubuntu2 [650 kB]
Get:2 http://fr.archive.ubuntu.com/ubuntu zesty/main amd64 grub-efi-amd64 amd64 2.02~beta3-4ubuntu2 [72.4 kB]
Get:3 http://fr.archive.ubuntu.com/ubuntu zesty/main amd64 grub-efi amd64 2.02~beta3-4ubuntu2 [2,534 B]
Fetched 725 kB in 2s (329 kB/s)
Preconfiguring packages ...
(Reading database ... 204883 files and directories currently installed.)
Removing grub-gfxpayload-lists (0.7) ...
Removing grub-pc (2.02~beta3-4ubuntu2) ...
Selecting previously unselected package grub-efi-amd64-bin.
(Reading database ... 204863 files and directories currently installed.)
Preparing to unpack .../grub-efi-amd64-bin_2.02~beta3-4ubuntu2_amd64.deb ...
Unpacking grub-efi-amd64-bin (2.02~beta3-4ubuntu2) ...
Selecting previously unselected package grub-efi-amd64.
Preparing to unpack .../grub-efi-amd64_2.02~beta3-4ubuntu2_amd64.deb ...
Unpacking grub-efi-amd64 (2.02~beta3-4ubuntu2) ...
Selecting previously unselected package grub-efi.
Preparing to unpack .../grub-efi_2.02~beta3-4ubuntu2_amd64.deb ...
Unpacking grub-efi (2.02~beta3-4ubuntu2) ...
Setting up grub-efi-amd64-bin (2.02~beta3-4ubuntu2) ...
Setting up grub-efi-amd64 (2.02~beta3-4ubuntu2) ...
Installing for x86_64-efi platform.
Installation finished. No error reported.
Generating grub configuration file ...
Warning: Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.
Found linux image: /boot/vmlinuz-4.10.0-20-generic
Found initrd image: /boot/initrd.img-4.10.0-20-generic
Found linux image: /boot/vmlinuz-4.10.0-19-generic
Found initrd image: /boot/initrd.img-4.10.0-19-generic
done
Processing triggers for man-db (2.7.6.1-2) ...
Setting up grub-efi (2.02~beta3-4ubuntu2) ...
root@ubuntu:/# cd /boot/efi/EFI
root@ubuntu:/boot/efi/EFI# sudo cp -R ubuntu BOOT
root@ubuntu:/boot/efi/EFI# cd BOOT
root@ubuntu:/boot/efi/EFI/BOOT# sudo cp grubx64.efi bootx64.efi
root@ubuntu:/boot/efi/EFI/BOOT# exit
ubuntu@ubuntu:~$ for i in /sys /proc /dev/pts /dev; do sudo umount /mnt$i; done
ubuntu@ubuntu:~$ sudo umount /mnt/boot/efi
ubuntu@ubuntu:~$ sudo umount /mnt
ubuntu@ubuntu:~$ sudo reboot
Hors ligne
#24 Le 12/05/2017, à 22:27
- bouhq
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Bonsoir malbo, j'ai suivi a la lettre ta procedure mais l'installateur a plante a l'etape8 alors que la progression d'installation avancait a 87 pour cent.
Hors ligne
#25 Le 13/05/2017, à 07:25
- malbo
Re : [Résolu ] Problème de grub 2 lors de l'installation d'ubuntu 16.04.lts
Je crois que j'ai trouvé : abandonne ma procédure du post #22 et refais la procédure de Sladek90 que j'ai indiquée dans le post #13 sauf qu'il y a une erreur dans une des commandes : à l'étape 6, au lieu de copier ce qu'il a indiqué :
sudo grub-install —no-nvram —root-directory=/mnt
Tu vas remplacer par la commande que j'indique :
sudo grub-install --no-nvram --root-directory=/mnt
ce petit crétin de Sladek90 nous a refilé une commande vérolée et c'est pour cela je suppose que tu avais bloqué à l'étape 6 (ton post #15) et moi j'avais bloqué pareil que toi au même endroit.
Le reste de la procédure passe normalement, à part quelques commandes qui ont "sudo" en tête alors que ce n'est pas utile (à l'étape 7 et à l'étape 8). Mais ce n'est pas grave : passe les autres commandes telles qu'elles sont indiquées par Sladek90 et ça devrait marcher.
Dernière modification par cqfd93 (Le 13/05/2017, à 12:27)
Hors ligne