[Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

ireachthesun · Le 15/08/2017, à 05:26

Bonsoir,
Je suis néophyte en linux et j'appréhende petit à petit le système d'exploitation.
Je suis sur xubuntu. Informations sur ma machine :

cat /etc/lsb-release

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.10
DISTRIB_CODENAME=yakkety

uname -r -m

4.8.0-59-generic i686

Informations USB :
lsusb

Bus 002 Device 003: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter

J'essaye depuis quelques jours d'avoir une connexion wifi grâce à une clé wifi Totolink N150USM (Ralink Technology, Corp. MT7601U Wireless Adapter).
J'ai donc procédé au téléchargement du pilote : http://www.totolink.net/sub/product/det … num=100037
J'ai procédé à l'extraction de l'archive et je tombe sur un dossier avec un "Makefile" et un "readme".
Je me suis renseigné un peu sur la compilation et j'ai cherché sur les forums si d'autres topics traitaient le même problème, notamment celui-ci.
Malgré cela, rien de concluant.

Voici le readme en question :

=======================================================================
Build Instructions:  
====================

1> $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz
    go to "./DPB_RT2870_Linux_STA_x.x.x.x" directory.
    
2> In Makefile
	 set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
	 define the linux kernel source include file path LINUX_SRC
	 modify to meet your need.

3> In os/linux/config.mk 
	define the GCC and LD of the target machine
	define the compiler flags CFLAGS
	modify to meet your need.
	** Build for being controlled by NetworkManager or wpa_supplicant wext functions
	   Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
	   => #>cd wpa_supplicant-x.x
	   => #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
	** Build for being controlled by WpaSupplicant with Ralink Driver
	   Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
	   => #>cd wpa_supplicant-0.5.7
	   => #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d

4> $make
	# compile driver source code
	# To fix "error: too few arguments to function Ḃċiwe_stream_add_event"
	  => $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c

5> $cp RT2870STA.dat  /etc/Wireless/RT2870STA/RT2870STA.dat
    
6> load driver, go to "os/linux/" directory.
    #[kernel 2.4]
    #    $/sbin/insmod rt2870sta.o
    #    $/sbin/ifconfig ra0 inet YOUR_IP up
        
    #[kernel 2.6]
    #    $/sbin/insmod rt2870sta.ko
    #    $/sbin/ifconfig ra0 inet YOUR_IP up

7> unload driver    
    $/sbin/ifconfig ra0 down
	$/sbin/rmmod rt2870sta

Etape 1, ok.
Etape 2, je ne comprends pas cela :

define the linux kernel source include file path LINUX_SRC

Etape 3, je n'ai pas touché au GC, LD et au CFLAGS. En revanche j'ai changé les valeurs de HAS_WPA_SUPPLICANT et HAS_NATIVE_WPA_SUPPLICANT_SUPPORT comme suggéré.
Je bloque donc à l'étape 4, celle de la compilation. J'ai tenté une compilation avec les commandes :

make
sudo checkinstall

À la fin de la compilation, quelques erreurs :

cc1: some warnings being treated as errors
scripts/Makefile.build:289 : la recette pour la cible « /home/massinealaver/Téléchargements/DPO_MT7601U_LinuxSTA_3.0.0.4_20130913/os/linux/../../sta/sync.o » a échouée
make[2]: *** [/home/massinealaver/Téléchargements/DPO_MT7601U_LinuxSTA_3.0.0.4_20130913/os/linux/../../sta/sync.o] Erreur 1
Makefile:1491 : la recette pour la cible « _module_/home/massinealaver/Téléchargements/DPO_MT7601U_LinuxSTA_3.0.0.4_20130913/os/linux » a échouée
make[1]: *** [_module_/home/massinealaver/Téléchargements/DPO_MT7601U_LinuxSTA_3.0.0.4_20130913/os/linux] Erreur 2
make[1] : on quitte le répertoire « /usr/src/linux-headers-4.8.0-59-generic »
Makefile:394 : la recette pour la cible « LINUX » a échouée
make: *** [LINUX] Erreur 2

Pouvez-vous me guider s'il vous plait ?
Je mets ici le code source du Makefile et du config.mk (après modification).

Makefile :

ifeq ($(WIFI_MODE),)
RT28xx_MODE = STA
else
RT28xx_MODE = $(WIFI_MODE)
endif

ifeq ($(TARGET),)
TARGET = LINUX
endif

ifeq ($(CHIPSET),)
CHIPSET = 7601U
endif

MODULE = $(word 1, $(CHIPSET))

#OS ABL - YES or NO
OSABL = NO

ifneq ($(TARGET),THREADX)
#RT28xx_DIR = home directory of RT28xx source code
RT28xx_DIR = $(shell pwd)
endif

include $(RT28xx_DIR)/os/linux/config.mk

RTMP_SRC_DIR = $(RT28xx_DIR)/RT$(MODULE)

#PLATFORM: Target platform
PLATFORM = PC
#PLATFORM = 5VT
#PLATFORM = IKANOS_V160
#PLATFORM = IKANOS_V180
#PLATFORM = SIGMA
#PLATFORM = SIGMA_8622
#PLATFORM = INIC
#PLATFORM = STAR
#PLATFORM = IXP
#PLATFORM = INF_TWINPASS
#PLATFORM = INF_DANUBE
#PLATFORM = INF_AR9
#PLATFORM = INF_VR9
#PLATFORM = BRCM_6358
#PLATFORM = INF_AMAZON_SE
#PLATFORM = CAVM_OCTEON
#PLATFORM = CMPC
#PLATFORM = RALINK_2880
#PLATFORM = RALINK_3052
#PLATFORM = SMDK
#PLATFORM = RMI
#PLATFORM = RMI_64
#PLATFORM = KODAK_DC
#PLATFORM = DM6446
#PLATFORM = FREESCALE8377
#PLATFORM = BL2348
#PLATFORM = BL23570
#PLATFORM = BLUBB
#PLATFORM = BLPMP
#PLATFORM = MT85XX
#PLATFORM = MT53XX
#PLATFORM = NXP_TV550
#PLATFORM = MVL5
#PLATFORM = RALINK_3352
#PLATFORM = UBICOM_IPX8
#PLATFORM = INTELP6
#PLATFORM = MSTARTV

#APSOC
ifeq ($(MODULE),3050)
PLATFORM = RALINK_3050
endif
ifeq ($(MODULE),3052)
PLATFORM = RALINK_3052
endif
ifeq ($(MODULE),3350)
PLATFORM = RALINK_3050
endif
ifeq ($(MODULE),3352)
PLATFORM = RALINK_3352
endif


#RELEASE Package
RELEASE = DPO


ifeq ($(TARGET),LINUX)
MAKE = make
endif

ifeq ($(TARGET), UCOS)
MAKE = make
endif
ifeq ($(TARGET),THREADX)
MAKE = gmake
endif

ifeq ($(TARGET), ECOS)
MAKE = make
MODULE = $(shell pwd | sed "s/.*\///" ).o
export MODULE
endif

ifeq ($(PLATFORM),5VT)
LINUX_SRC = /home/ralink-2860-sdk-5vt-distribution/linux-2.6.17
CROSS_COMPILE = /opt/crosstool/uClibc_v5te_le_gcc_4_1_1/bin/arm-linux-
endif

ifeq ($(PLATFORM),UBICOM_IPX8)
LINUX_SRC = /home/sample/Customers/UBICOM/ubicom-linux-dist-2.1.1/linux-2.6.x
CROSS_COMPILE = ubicom32-elf-
endif

ifeq ($(PLATFORM),IKANOS_V160)
LINUX_SRC = /home/sample/projects/LX_2618_RG_5_3_00r4_SRC/linux-2.6.18
CROSS_COMPILE = mips-linux-
endif

ifeq ($(PLATFORM),IKANOS_V180)
LINUX_SRC = /home/sample/projects/LX_BSP_VX180_5_4_0r1_ALPHA_26DEC07/linux-2.6.18
CROSS_COMPILE = mips-linux-
endif

ifeq ($(PLATFORM),SIGMA)
LINUX_SRC = /root/sigma/smp86xx_kernel_source_2.7.172.0/linux-2.6.15
CROSS_COMPILE = /root/sigma/smp86xx_toolchain_2.7.172.0/build_mipsel_nofpu/staging_dir/bin/mipsel-linux-
endif

ifeq ($(PLATFORM),SIGMA_8622)
LINUX_SRC = /home/snowpin/armutils_2.5.120.1/build_arm/linux-2.4.22-em86xx
CROSS_COMPILE = /home/snowpin/armutils_2.5.120.1/toolchain/bin/arm-elf-
CROSS_COMPILE_INCLUDE = /home/snowpin/armutils_2.5.120.1/toolchain/lib/gcc-lib/arm-elf/2.95.3
endif

ifeq ($(PLATFORM),INIC)
UCOS_SRC = /opt/uCOS/iNIC_rt2880
CROSS_COMPILE = /usr/bin/mipsel-linux-
endif

ifeq ($(PLATFORM),MSTARTV)
LINUX_SRC = /WIDI-SDK/WIDI_MSTAR/RedLion/2.6.35.11
CROSS_COMPILE = /WIDI-SDK/WIDI_MSTAR/arm-2010.09/bin/arm-none-linux-gnueabi-
endif

ifeq ($(PLATFORM),STAR)
LINUX_SRC = /opt/star/kernel/linux-2.4.27-star
CROSS_COMPILE = /opt/star/tools/arm-linux/bin/arm-linux-
endif

ifeq ($(PLATFORM),RMI)
LINUX_SRC = /opt/rmi/1.7.0/linux/src/
CROSS_COMPILE = /opt/rmi/1.7.0/mipscross/nptl/bin/mips64-unknown-linux-gnu-
endif

ifeq ($(PLATFORM),RMI_64)
LINUX_SRC = /opt/rmi/1.7.0/linux_64/src/
CROSS_COMPILE = /opt/rmi/1.7.0/mipscross/nptl/bin/mips64-unknown-linux-gnu-
endif

ifeq ($(PLATFORM), RALINK_2880)
LINUX_SRC = /project/stable/RT288x/RT288x_SDK/source/linux-2.4.x
CROSS_COMPILE = /opt/buildroot-gdb/bin/mipsel-linux-
endif

ifeq ($(PLATFORM),RALINK_3052)
LINUX_SRC = /home/peter/ap_soc/SDK_3_3_0_0/RT288x_SDK/source/linux-2.6.21.x
CROSS_COMPILE = /opt/buildroot-gcc342/bin/mipsel-linux-uclibc-
endif

ifeq ($(PLATFORM),FREESCALE8377)
LINUX_SRC = /opt/ltib-mpc8377_rds-20090309/rpm/BUILD/linux-2.6.25 
CROSS_COMPILE = /opt/freescale/usr/local/gcc-4.2.187-eglibc-2.5.187/powerpc-linux-gnu/bin/powerpc-linux-gnu-
endif

ifeq ($(PLATFORM),BL2348)
LINUX_SRC = /home/sample/Customers/BroadLight/bl234x-linux-2.6.21-small-v29
CROSS_COMPILE = mips-wrs-linux-gnu-
endif

ifeq ($(PLATFORM),BL23570)
LINUX_SRC = /home/FIBERHOME/linux-2.6.34.8
CROSS_COMPILE = mips-wrs-linux-gnu-mips_74k_softfp-glibc_small-
ARCH:=mips
export $ARCH
endif


ifeq ($(PLATFORM),BLUBB)
LINUX_SRC = /home/sample/Customers/BroadLight/UBB/gmp20/linux-2.6.21-small
CROSS_COMPILE = mips-wrs-linux-gnu-
endif

ifeq ($(PLATFORM),BLPMP)
LINUX_SRC = /home/sample/Customers/BroadLight/UBB/pmp16/bl234x-linux-2.6.21-small-v30.2
CROSS_COMPILE = mips-wrs-linux-gnu-
endif

ifeq ($(PLATFORM),PC)
# Linux 2.6
LINUX_SRC = /lib/modules/$(shell uname -r)/build
# Linux 2.4 Change to your local setting
#LINUX_SRC = /usr/src/linux-2.4
LINUX_SRC_MODULE = /lib/modules/$(shell uname -r)/kernel/drivers/net/wireless/
CROSS_COMPILE = 
endif

ifeq ($(PLATFORM),INTELP6)
LINUX_SRC = /tftpboot/IntelCE-20.0.11052.243193/project_build_i686/IntelCE/kernel-20.0.11024.238456/linux-2.6.35
CROSS_COMPILE = /tftpboot/IntelCE-20.0.11052.243193/build_i686/i686-linux-elf/bin/i686-cm-linux-
endif

ifeq ($(PLATFORM),IXP)
LINUX_SRC = /project/stable/Gmtek/snapgear-uclibc/linux-2.6.x
CROSS_COMPILE = arm-linux-
endif

ifeq ($(PLATFORM),INF_TWINPASS)
# Linux 2.6
#LINUX_SRC = /lib/modules/$(shell uname -r)/build
# Linux 2.4 Change to your local setting
LINUX_SRC = /project/stable/twinpass/release/2.0.1/source/kernel/opensource/linux-2.4.31/
CROSS_COMPILE = mips-linux-
endif

ifeq ($(PLATFORM),INF_DANUBE)
LINUX_SRC = /opt/danube/sdk/linux-2.6.16.x
CROSS_COMPILE = mips-linux-
ROOTDIR = /opt/danube/sdk
export ROOTDIR
endif

ifeq ($(PLATFORM),INF_AR9)
LINUX_SRC = /root/ar9/xR9_BSP1.2.2.0/source/kernel/opensource/linux-2.6.20/
CROSS_COMPILE = /root/ar9/ifx-lxdb26-1.0.2/gcc-3.4.4/toolchain-mips/bin/
endif

ifeq ($(PLATFORM),INF_VR9)
LINUX_SRC = /home/public/lantiq/VR9/UGW-4.2/build_dir/linux-ifxcpe_platform_vr9/linux-2.6.20.19
CROSS_COMPILE = /home/public/lantiq/VR9/UGW-4.2/staging_dir/toolchain-mips_gcc-3.4.6_uClibc-0.9.29/bin/mips-linux-
endif

ifeq ($(PLATFORM),BRCM_6358)
LINUX_SRC = 
CROSS_COMPILE = 
endif

ifeq ($(PLATFORM),INF_AMAZON_SE)
# Linux 2.6
#LINUX_SRC = /lib/modules/$(shell uname -r)/build
# Linux 2.4 Change to your local setting
LINUX_SRC = /backup/ifx/3.6.2.2/source/kernel/opensource/linux-2.4.31
#CROSS_COMPILE = mips-linux-
#LINUX_SRC = /project/Infineon/3.6.2.2/source/kernel/opensource/linux-2.4.31
CROSS_COMPILE = /opt/uclibc-toolchain/ifx-lxdb-1-2-3-external/gcc-3.3.6/toolchain-mips/R0208V35/mips-linux-uclibc/bin/
endif

ifeq ($(PLATFORM),ST)
LINUX_SRC = /opt/STM/STLinux-2.2/devkit/sources/kernel/linux0039
CROSS_COMPILE = /opt/STM/STLinux-2.2/devkit/sh4/bin/sh4-linux-
ARCH := sh
export ARCH
endif

ifeq ($(PLATFORM),CAVM_OCTEON)
OCTEON_ROOT = /usr/local/Cavium_Networks/OCTEON-SDK
LINUX_SRC = $(OCTEON_ROOT)/linux/kernel_2.6/linux
CROSS_COMPILE = mips64-octeon-linux-gnu-
endif

ifeq ($(PLATFORM),CMPC)
LINUX_SRC = /opt/fvt_11N_SDK_0807/fvt131x_SDK_11n/linux-2.6.17
CROSS_COMPILE =
endif

ifeq ($(PLATFORM),SMDK)
LINUX_SRC = /home/bhushan/itcenter/may28/linux-2.6-samsung
CROSS_COMPILE = /usr/local/arm/4.2.2-eabi/usr/bin/arm-linux-
endif

ifeq ($(PLATFORM),RALINK_3352)
LINUX_SRC = /home/sample/3352/RT288x_SDK/source/linux-2.6.21.x
CROSS_COMPILE = /opt/buildroot-gcc342/bin/mipsel-linux-
endif

ifeq ($(PLATFORM),KODAK_DC)
SKD_SRC = C:/SigmaTel/DC1250_SDK_v1-9/sdk
CROSS_COMPILE = $(cc)
endif

ifeq ($(PLATFORM),DM6446)
LINUX_SRC = /home/fonchi/work/soc/ti-davinci
endif

ifeq ($(PLATFORM),MT85XX)
LINUX_SRC = $(RT28xx_DIR)/../../../../build_linux
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE=armv7a-mediatek451_001_vfp-linux-gnueabi-
endif
CC=$(CROSS_COMPILE)gcc
$(warning =============================================)
$(warning CC=$(CC) for wifi driver)
$(warning =============================================)
endif

ifeq ($(PLATFORM),NXP_TV550) 
LINUX_SRC = /data/tv550/kernel/linux-2.6.28.9
LINUX_SRC_MODULE = /data/tv550/kernel/linux-2.6.28.9/drivers/net/wireless
CROSS_COMPILE = /opt/embeddedalley/nxp_tv550/bin/mipsel-linux-
endif

ifeq ($(PLATFORM),MVL5)
LINUX_SRC = /home2/charlestu/AP-VT3426/linux-2.6.18
CROSS_COMPILE = /opt/montavista/pro/devkit/arm/v5t_le_mvl5/bin/arm_v5t_le-
endif

export OSABL RT28xx_DIR RT28xx_MODE LINUX_SRC CROSS_COMPILE CROSS_COMPILE_INCLUDE PLATFORM RELEASE CHIPSET MODULE RTMP_SRC_DIR LINUX_SRC_MODULE TARGET HAS_WOW_SUPPORT

# The targets that may be used.
PHONY += all build_tools test UCOS THREADX LINUX release prerelease clean uninstall install libwapi osabl

ifeq ($(TARGET),LINUX)
all: build_tools $(TARGET)
else
all: $(TARGET)
endif 



build_tools:
	$(MAKE) -C tools
	$(RT28xx_DIR)/tools/bin2h

test:
	$(MAKE) -C tools test

UCOS:
	$(MAKE) -C os/ucos/ MODE=$(RT28xx_MODE)
	echo $(RT28xx_MODE)

ECOS:
	$(MAKE) -C os/ecos/ MODE=$(RT28xx_MODE)
	cp -f os/ecos/$(MODULE) $(MODULE)

THREADX:
	$(MAKE) -C $(RT28xx_DIR)/os/Threadx -f $(RT28xx_DIR)/os/ThreadX/Makefile

LINUX:
ifneq (,$(findstring 2.4,$(LINUX_SRC)))

ifeq ($(OSABL),YES)
	cp -f os/linux/Makefile.4.util $(RT28xx_DIR)/os/linux/Makefile
	$(MAKE) -C $(RT28xx_DIR)/os/linux/
endif

	cp -f os/linux/Makefile.4 $(RT28xx_DIR)/os/linux/Makefile
	$(MAKE) -C $(RT28xx_DIR)/os/linux/

ifeq ($(OSABL),YES)
	cp -f os/linux/Makefile.4.netif $(RT28xx_DIR)/os/linux/Makefile
	$(MAKE) -C $(RT28xx_DIR)/os/linux/
endif

ifeq ($(RT28xx_MODE),AP)
	cp -f $(RT28xx_DIR)/os/linux/rt$(MODULE)ap.o /tftpboot
ifeq ($(OSABL),YES)
	cp -f $(RT28xx_DIR)/os/linux/rtutil$(MODULE)ap.o /tftpboot
	cp -f $(RT28xx_DIR)/os/linux/rtnet$(MODULE)ap.o /tftpboot
endif
ifeq ($(PLATFORM),INF_AMAZON_SE)
	cp -f /tftpboot/rt2870ap.o /backup/ifx/build/root_filesystem/lib/modules/2.4.31-Amazon_SE-3.6.2.2-R0416_Ralink/kernel/drivers/net
endif
else	
ifeq ($(RT28xx_MODE),APSTA)
	cp -f $(RT28xx_DIR)/os/linux/rt$(MODULE)apsta.o /tftpboot
ifeq ($(OSABL),YES)
	cp -f $(RT28xx_DIR)/os/linux/rtutil$(MODULE)apsta.o /tftpboot
	cp -f $(RT28xx_DIR)/os/linux/rtnet$(MODULE)apsta.o /tftpboot
endif
else
	cp -f $(RT28xx_DIR)/os/linux/rt$(MODULE)sta.o /tftpboot
ifeq ($(OSABL),YES)
	cp -f $(RT28xx_DIR)/os/linux/rtutil$(MODULE)sta.o /tftpboot
	cp -f $(RT28xx_DIR)/os/linux/rtnet$(MODULE)sta.o /tftpboot
endif
endif	
endif	
else

ifeq ($(OSABL),YES)
	cp -f os/linux/Makefile.6.util $(RT28xx_DIR)/os/linux/Makefile
	$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
endif

	cp -f os/linux/Makefile.6 $(RT28xx_DIR)/os/linux/Makefile
ifeq ($(PLATFORM),DM6446)
	$(MAKE)  ARCH=arm CROSS_COMPILE=arm_v5t_le- -C  $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
else
ifeq ($(PLATFORM),FREESCALE8377)
	$(MAKE) ARCH=powerpc CROSS_COMPILE=$(CROSS_COMPILE) -C  $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
else
	$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
endif
endif

ifeq ($(OSABL),YES)
	cp -f os/linux/Makefile.6.netif $(RT28xx_DIR)/os/linux/Makefile
	$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
endif

ifeq ($(RT28xx_MODE),AP)
ifneq ($(findstring 7601,$(CHIPSET)),)
	cp -f $(RT28xx_DIR)/os/linux/mt$(MODULE)ap.ko /tftpboot
else
	cp -f $(RT28xx_DIR)/os/linux/rt$(MODULE)ap.ko /tftpboot
endif
ifeq ($(OSABL),YES)
	cp -f $(RT28xx_DIR)/os/linux/rtutil$(MODULE)ap.ko /tftpboot
	cp -f $(RT28xx_DIR)/os/linux/rtnet$(MODULE)ap.ko /tftpboot
endif
	rm -f os/linux/rt$(MODULE)ap.ko.lzma
	/root/bin/lzma e os/linux/rt$(MODULE)ap.ko os/linux/rt$(MODULE)ap.ko.lzma
else	
ifeq ($(RT28xx_MODE),APSTA)
	cp -f $(RT28xx_DIR)/os/linux/rt$(MODULE)apsta.ko /tftpboot
ifeq ($(OSABL),YES)
	cp -f $(RT28xx_DIR)/os/linux/rtutil$(MODULE)apsta.ko /tftpboot
	cp -f $(RT28xx_DIR)/os/linux/rtnet$(MODULE)apsta.ko /tftpboot
endif
else
ifneq ($(findstring 7601,$(CHIPSET)),)
	cp -f $(RT28xx_DIR)/os/linux/mt$(MODULE)sta.ko /tftpboot 2>/dev/null || :
else
	cp -f $(RT28xx_DIR)/os/linux/rt$(MODULE)sta.ko /tftpboot 2>/dev/null || :
endif
ifeq ($(OSABL),YES)
ifneq ($(findstring 7601,$(CHIPSET)),)
	cp -f $(RT28xx_DIR)/os/linux/mtutil$(MODULE)sta.ko /tftpboot 2>/dev/null || :
	cp -f $(RT28xx_DIR)/os/linux/mtnet$(MODULE)sta.ko /tftpboot 2>/dev/null || :
else
	cp -f $(RT28xx_DIR)/os/linux/rtutil$(MODULE)sta.ko /tftpboot 2>/dev/null || :
	cp -f $(RT28xx_DIR)/os/linux/rtnet$(MODULE)sta.ko /tftpboot 2>/dev/null || :
endif
endif
ifeq ($(PLATFORM),MT85XX)
	cp -f $(RT28xx_DIR)/os/linux/rtsta.ko $(RT28xx_DIR)/../../../../../BDP_Generic/build_linux_ko/src/driver/wlan/
endif
endif
endif
endif


release: build_tools
	$(MAKE) -C $(RT28xx_DIR)/striptool -f Makefile.release clean
	$(MAKE) -C $(RT28xx_DIR)/striptool -f Makefile.release
	striptool/striptool.out
ifeq ($(RELEASE), DPO)
	gcc -o striptool/banner striptool/banner.c
	./striptool/banner -b striptool/copyright.gpl -s DPO/ -d DPO_GPL -R
	./striptool/banner -b striptool/copyright.frm -s DPO_GPL/include/firmware.h
endif

prerelease:
ifeq ($(MODULE), 2880)
	$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.release.2880 prerelease
else
	$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.release prerelease
endif
	cp $(RT28xx_DIR)/os/linux/Makefile.DPB $(RTMP_SRC_DIR)/os/linux/.
	cp $(RT28xx_DIR)/os/linux/Makefile.DPA $(RTMP_SRC_DIR)/os/linux/.
	cp $(RT28xx_DIR)/os/linux/Makefile.DPC $(RTMP_SRC_DIR)/os/linux/.
ifeq ($(RT28xx_MODE),STA)
	cp $(RT28xx_DIR)/os/linux/Makefile.DPD $(RTMP_SRC_DIR)/os/linux/.
	cp $(RT28xx_DIR)/os/linux/Makefile.DPO $(RTMP_SRC_DIR)/os/linux/.
endif	

clean:
ifeq ($(TARGET), LINUX)
	cp -f os/linux/Makefile.clean os/linux/Makefile
	$(MAKE) -C os/linux clean
	rm -rf os/linux/Makefile
endif	
ifeq ($(TARGET), UCOS)
	$(MAKE) -C os/ucos clean MODE=$(RT28xx_MODE)
endif
ifeq ($(TARGET), ECOS)
	$(MAKE) -C os/ecos clean MODE=$(RT28xx_MODE)
endif

uninstall:
ifeq ($(TARGET), LINUX)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
	$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.4 uninstall
else
	$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.6 uninstall
endif
endif

install:
ifeq ($(TARGET), LINUX)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
	$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.4 install
else
	$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.6 install
endif
endif

libwapi:
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
	cp -f os/linux/Makefile.libwapi.4 $(RT28xx_DIR)/os/linux/Makefile
	$(MAKE) -C $(RT28xx_DIR)/os/linux/
else
	cp -f os/linux/Makefile.libwapi.6 $(RT28xx_DIR)/os/linux/Makefile	
	$(MAKE) -C  $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules	
endif	

osutil:
ifeq ($(OSABL),YES)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
	cp -f os/linux/Makefile.4.util $(RT28xx_DIR)/os/linux/Makefile
	$(MAKE) -C $(RT28xx_DIR)/os/linux/
else
	cp -f os/linux/Makefile.6.util $(RT28xx_DIR)/os/linux/Makefile
	$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
endif
endif

osnet:
ifeq ($(OSABL),YES)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
	cp -f os/linux/Makefile.4.netif $(RT28xx_DIR)/os/linux/Makefile
	$(MAKE) -C $(RT28xx_DIR)/os/linux/
else
	cp -f os/linux/Makefile.6.netif $(RT28xx_DIR)/os/linux/Makefile
	$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
endif
endif

osdrv:
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
	cp -f os/linux/Makefile.4 $(RT28xx_DIR)/os/linux/Makefile
	$(MAKE) -C $(RT28xx_DIR)/os/linux/
else
	cp -f os/linux/Makefile.6 $(RT28xx_DIR)/os/linux/Makefile
	$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
endif

# Declare the contents of the .PHONY variable as phony.  We keep that information in a variable
.PHONY: $(PHONY)

config.mk :

# Support ATE function
HAS_ATE=n

# Support QA ATE function
HAS_QA_SUPPORT=n

HAS_RSSI_FEEDBACK=n

# Support XLINK mode
HAS_XLINK=n


HAS_NINTENDO=n

# Support LLTD function
HAS_LLTD=n

# Support WDS function
HAS_WDS=n

# Support AP-Client function
HAS_APCLI=n

# Support Wpa_Supplicant
# i.e. wpa_supplicant -Dralink
HAS_WPA_SUPPLICANT=y


# Support Native WpaSupplicant for Network Maganger
# i.e. wpa_supplicant -Dwext
HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y

#Support Net interface block while Tx-Sw queue full
HAS_BLOCK_NET_IF=n

#Support IGMP-Snooping function.
HAS_IGMP_SNOOP_SUPPORT=n

#Support DFS function
HAS_DFS_SUPPORT=n

#Support Carrier-Sense function
HAS_CS_SUPPORT=n

ifeq ($(PLATFORM),MT85XX)
#Support HE_SUPPORT
HAS_HE_SUPPORT=y
HAS_HE_BD_SUPPORT=y
endif

ifeq ($(PLATFORM),MT53XX)
#Support HE_SUPPORT
HAS_HE_SUPPORT=y
HAS_HE_TV_SUPPORT=y
HAS_RESPOND_P2P_PROBE_REQ_WHEN_INFRA_CONNECTED=y
endif

#Support WEPAUTO mode try Open first then shared
HAS_WEPAUTO_OPEN_FIRST_SUPPORT=n


# Support user specific transmit rate of Multicast packet.
HAS_MCAST_RATE_SPECIFIC_SUPPORT=n

# Support for Multiple Cards
HAS_MC_SUPPORT=n

#Support for PCI-MSI
HAS_MSI_SUPPORT=n


#Support for IEEE802.11e DLS
HAS_QOS_DLS_SUPPORT=n

#Support for EXT_CHANNEL
HAS_EXT_BUILD_CHANNEL_LIST=n

#Support for IDS 
HAS_IDS_SUPPORT=n


#Support for Net-SNMP
HAS_SNMP_SUPPORT=n

#Support features of 802.11n Draft3
HAS_DOT11N_DRAFT3_SUPPORT=y

#Support features of Single SKU. 
HAS_SINGLE_SKU_SUPPORT=n

#Support features of Single SKU. 
HAS_SINGLE_SKU_V2_SUPPORT=n

#Support features of 802.11n
HAS_DOT11_N_SUPPORT=y

#Support for 802.11ac VHT
HAS_DOT11_VHT_SUPPORT=n



#Support for 2860/2880 co-exist 
HAS_RT2880_RT2860_COEXIST=n

HAS_KTHREAD_SUPPORT=n





#Support for WiFi Display
HAS_WFD_SUPPORT=n

#Support for Auto channel select enhance
HAS_AUTO_CH_SELECT_ENHANCE=n

#Support statistics count
HAS_STATS_COUNT=y

#Support TSSI Antenna Variation
HAS_TSSI_ANTENNA_VARIATION=n

#Support USB_BULK_BUF_ALIGMENT
HAS_USB_BULK_BUF_ALIGMENT=n

#Support for USB_SUPPORT_SELECTIVE_SUSPEND
HAS_USB_SUPPORT_SELECTIVE_SUSPEND=n

#Support USB load firmware by multibyte
HAS_USB_FIRMWARE_MULTIBYTE_WRITE=n


#Support ANDROID_SUPPORT
HAS_ANDROID_SUPPORT=n

#HAS_IFUP_IN_PROBE_SUPPORT
HAS_IFUP_IN_PROBE_SUPPORT=n




#Support TXRX SW Antenna Diversity
HAS_TXRX_SW_ANTDIV_SUPPORT=n

#Client support WDS function
HAS_CLIENT_WDS_SUPPORT=n

#Support for Bridge Fast Path & Bridge Fast Path function open to other module
HAS_BGFP_SUPPORT=n
HAS_BGFP_OPEN_SUPPORT=n

# Support HOSTAPD function
HAS_HOSTAPD_SUPPORT=n

#Support GreenAP function
HAS_GREENAP_SUPPORT=n

#Support MAC80211 LINUX-only function
#Please make sure the version for CFG80211.ko and MAC80211.ko is same as the one
#our driver references to.
HAS_CFG80211_SUPPORT=n

#Support RFKILL hardware block/unblock LINUX-only function
HAS_RFKILL_HW_SUPPORT=n



HAS_APCLI_WPA_SUPPLICANT=n

HAS_RTMP_FLASH_SUPPORT=n

ifeq ($(OSABL),YES)
HAS_OSABL_FUNC_SUPPORT=y
HAS_OSABL_OS_PCI_SUPPORT=y
HAS_OSABL_OS_USB_SUPPORT=y
HAS_OSABL_OS_RBUS_SUPPORT=n
HAS_OSABL_OS_AP_SUPPORT=y
HAS_OSABL_OS_STA_SUPPORT=y
endif

HAS_LED_CONTROL_SUPPORT=n


#Support WIDI feature
#Must enable HAS_WSC at the same time.

HAS_TXBF_SUPPORT=n

HAS_STREAM_MODE_SUPPORT=n

HAS_NEW_RATE_ADAPT_SUPPORT=n

HAS_RATE_ADAPT_AGS_SUPPORT=n




#MT7601
HAS_RX_CSO_SUPPORT=y


HAS_WOW_SUPPORT=n
HAS_WOW_IFDOWN_SUPPORT=n
HAS_NEW_WOW_SUPPORT=n

HAS_ANDES_FIRMWARE_SUPPORT=n

HAS_HDR_TRANS_SUPPORT=n

HAS_MULTI_CHANNEL=n

HAS_MICROWAVE_OVEN_SUPPORT=n

HAS_WIFI_P2P_CONCURRENT_FAST_SCAN=n

#################################################

CC := $(CROSS_COMPILE)gcc
LD := $(CROSS_COMPILE)ld

WFLAGS := -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT  -DLINUX -Wall -Wstrict-prototypes -Wno-trigraphs
WFLAGS += -DSYSTEM_LOG_SUPPORT -DRT28xx_MODE=$(RT28xx_MODE) -DCHIPSET=$(MODULE) -DRESOURCE_PRE_ALLOC
#WFLAGS += -DFPGA_MODE
WFLAGS += -I$(RT28xx_DIR)/include





ifeq ($(HAS_WIFI_P2P_CONCURRENT_FAST_SCAN),y)
WFLAGS += -DWIFI_P2P_CONCURRENT_FAST_SCAN
endif

ifeq ($(HAS_HE_SUPPORT),y)
WFLAGS += -DHE_SUPPORT
WFLAGS += -DIP_ASSEMBLY
endif

ifeq ($(HAS_HE_BD_SUPPORT),y)
WFLAGS += -DHE_BD_SUPPORT
endif

ifeq ($(HAS_RESPOND_P2P_PROBE_REQ_WHEN_INFRA_CONNECTED),y)
WFLAGS += -DRESPOND_P2P_PROBE_REQ_WHEN_INFRA_CONNECTED
endif

ifeq ($(HAS_WEPAUTO_OPEN_FIRST_SUPPORT),y)
WFLAGS += -DWEPAUTO_OPEN_FIRST
endif

ifeq ($(HAS_HE_TV_SUPPORT),y)
WFLAGS += -DHE_TV_SUPPORT
endif

ifeq ($(HAS_KTHREAD_SUPPORT),y)
WFLAGS += -DKTHREAD_SUPPORT
endif

ifeq ($(HAS_RTMP_FLASH_SUPPORT),y)
WFLAGS += -DRTMP_FLASH_SUPPORT
endif

ifeq ($(HAS_STREAM_MODE_SUPPORT),y)
WFLAGS += -DSTREAM_MODE_SUPPORT
endif

ifeq ($(HAS_SINGLE_SKU_SUPPORT),y)
WFLAGS += -DSINGLE_SKU
endif

ifeq ($(HAS_SINGLE_SKU_V2_SUPPORT),y)
WFLAGS += -DSINGLE_SKU_V2
endif

ifeq ($(HAS_DOT11_VHT_SUPPORT),y)
WFLAGS += -DDOT11_VHT_AC
endif

ifeq ($(HAS_ANDES_FIRMWARE_SUPPORT),y)
WFLAGS += -DANDES_FIRMWARE_SUPPORT
endif

ifeq ($(HAS_HDR_TRANS_SUPPORT),y)
WFLAGS += -DHDR_TRANS_SUPPORT
endif


#################################################

# config for STA mode

ifeq ($(RT28xx_MODE),STA)
WFLAGS += -DCONFIG_STA_SUPPORT -DSCAN_SUPPORT -DDBG

ifeq ($(HAS_XLINK),y)
WFLAGS += -DXLINK_SUPPORT
endif


ifeq ($(HAS_WPA_SUPPLICANT),y)
WFLAGS += -DWPA_SUPPLICANT_SUPPORT
ifeq ($(HAS_NATIVE_WPA_SUPPLICANT_SUPPORT),y)
WFLAGS += -DNATIVE_WPA_SUPPLICANT_SUPPORT
endif
endif




ifeq ($(HAS_ATE),y)
WFLAGS += -DRALINK_ATE
WFLAGS += -DCONFIG_RT2880_ATE_CMD_NEW
WFLAGS += -I$(RT28xx_DIR)/ate/include
ifeq ($(HAS_QA_SUPPORT),y)
WFLAGS += -DRALINK_QA
endif
endif


ifeq ($(HAS_SNMP_SUPPORT),y)
WFLAGS += -DSNMP_SUPPORT
endif

ifeq ($(HAS_QOS_DLS_SUPPORT),y)
WFLAGS += -DQOS_DLS_SUPPORT
endif

ifeq ($(HAS_DOT11_N_SUPPORT),y)
WFLAGS += -DDOT11_N_SUPPORT

ifeq ($(HAS_DOT11N_DRAFT3_SUPPORT),y)
WFLAGS += -DDOT11N_DRAFT3
endif

ifeq ($(HAS_TXBF_SUPPORT),y)
WFLAGS += -DTXBF_SUPPORT
endif

ifeq ($(HAS_NEW_RATE_ADAPT_SUPPORT),y)
WFLAGS += -DNEW_RATE_ADAPT_SUPPORT
endif

endif


ifeq ($(HAS_MULTI_CHANNEL),y)
HAS_P2P_SUPPORT=y
HAS_P2P_SPECIFIC_WIRELESS_EVENT=y
WFLAGS += -DCONFIG_MULTI_CHANNEL
endif



ifeq ($(HAS_WFD_SUPPORT),y)
HAS_P2P_SUPPORT=y
HAS_P2P_SPECIFIC_WIRELESS_EVENT=y
WFLAGS += -DWFD_SUPPORT
endif


ifeq ($(HAS_CS_SUPPORT),y)
WFLAGS += -DCARRIER_DETECTION_SUPPORT
endif

ifeq ($(HAS_STATS_COUNT),y)
WFLAGS += -DSTATS_COUNT_SUPPORT
endif

ifeq ($(HAS_TSSI_ANTENNA_VARIATION),y)
WFLAGS += -DTSSI_ANTENNA_VARIATION
endif

ifeq ($(HAS_ANDROID_SUPPORT),y)
WFLAGS += -DANDROID_SUPPORT
endif


ifeq ($(HAS_IFUP_IN_PROBE_SUPPORT),y)
WFLAGS += -DIFUP_IN_PROBE
endif

ifeq ($(HAS_USB_SUPPORT_SELECTIVE_SUSPEND),y)
WFLAGS += -DUSB_SUPPORT_SELECTIVE_SUSPEND
endif

ifeq ($(HAS_USB_FIRMWARE_MULTIBYTE_WRITE),y)
WFLAGS += -DUSB_FIRMWARE_MULTIBYTE_WRITE -DMULTIWRITE_BYTES=4
endif

ifeq ($(HAS_CFG80211_SUPPORT),y)
WFLAGS += -DRT_CFG80211_SUPPORT -DEXT_BUILD_CHANNEL_LIST
ifeq ($(HAS_RFKILL_HW_SUPPORT),y)
WFLAGS += -DRFKILL_HW_SUPPORT
endif
endif

ifeq ($(OSABL),YES)
WFLAGS += -DOS_ABL_SUPPORT
ifeq ($(HAS_OSABL_FUNC_SUPPORT),y)
WFLAGS += -DOS_ABL_FUNC_SUPPORT
endif
ifeq ($(HAS_OSABL_OS_PCI_SUPPORT),y)
WFLAGS += -DOS_ABL_OS_PCI_SUPPORT
endif
ifeq ($(HAS_OSABL_OS_USB_SUPPORT),y)
WFLAGS += -DOS_ABL_OS_USB_SUPPORT
endif
ifeq ($(HAS_OSABL_OS_RBUS_SUPPORT),y)
WFLAGS += -DOS_ABL_OS_RBUS_SUPPORT
endif
ifeq ($(HAS_OSABL_OS_AP_SUPPORT),y)
WFLAGS += -DOS_ABL_OS_AP_SUPPORT
endif
ifeq ($(HAS_OSABL_OS_STA_SUPPORT),y)
WFLAGS += -DOS_ABL_OS_STA_SUPPORT
endif
endif


ifeq ($(HAS_TXRX_SW_ANTDIV_SUPPORT),y)
WFLAGS += -DTXRX_SW_ANTDIV_SUPPORT
endif


ifeq ($(HAS_WIDI_SUPPORT),y)
WFLAGS += -DWIDI_SUPPORT

ifeq ($(HAS_INTEL_L2SD_TOGGLE_SCAN_SUPPORT),y)
WFLAGS += -DINTEL_L2SD_TOGGLE_SCAN_SUPPORT
endif

ifeq ($(HAS_WIDI_GEN4_SUPPORT),y)
WFLAGS += -DWIDI_GEN4_SUPPORT
endif

ifeq ($(HAS_P2P_SUPPORT),y)
ifeq ($(HAS_INTEL_WFD_SUPPORT),y)
WFLAGS += -DINTEL_WFD_SUPPORT
endif

ifeq ($(HAS_WFA_WFD_SUPPORT),y)
WFLAGS += -DWFA_WFD_SUPPORT
endif
endif

endif

ifeq ($(HAS_WOW_SUPPORT),y)
WFLAGS += -DWOW_SUPPORT
endif

ifeq ($(HAS_WOW_IFDOWN_SUPPORT),y)
WFLAGS += -DWOW_IFDOWN_SUPPORT
endif

ifeq ($(HAS_NEW_WOW_SUPPORT),y)
WFLAGS += -DNEW_WOW_SUPPORT
endif

endif
# endif of ifeq ($(RT28xx_MODE),STA)

#################################################

#################################################

#
# Common compiler flag
#






ifeq ($(HAS_EXT_BUILD_CHANNEL_LIST),y)
WFLAGS += -DEXT_BUILD_CHANNEL_LIST
endif

ifeq ($(HAS_IDS_SUPPORT),y)
WFLAGS += -DIDS_SUPPORT
endif


ifeq ($(OSABL),YES)
WFLAGS += -DEXPORT_SYMTAB
endif

ifeq ($(HAS_CLIENT_WDS_SUPPORT),y)
WFLAGS += -DCLIENT_WDS
endif

ifeq ($(HAS_BGFP_SUPPORT),y)
WFLAGS += -DBG_FT_SUPPORT
endif

ifeq ($(HAS_BGFP_OPEN_SUPPORT),y)
WFLAGS += -DBG_FT_OPEN_SUPPORT
endif


ifeq ($(HAS_LED_CONTROL_SUPPORT),y)
WFLAGS += -DLED_CONTROL_SUPPORT
endif


ifeq ($(HAS_MICROWAVE_OVEN_SUPPORT),y)
WFLAGS += -DMICROWAVE_OVEN_SUPPORT
endif

#################################################
# ChipSet specific definitions.
#
ifneq ($(findstring 2860,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DRT2860 -DRT28xx -DA_BAND_SUPPORT
CHIPSET_DAT = 2860
endif

ifneq ($(findstring 3090,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DRT30xx -DRT3090  -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DVCORECAL_SUPPORT
CHIPSET_DAT = 2860
endif

ifneq ($(findstring 2870,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRT2870 -DRT28xx -DRTMP_TIMER_TASK_SUPPORT -DA_BAND_SUPPORT
CHIPSET_DAT = 2870
endif

ifneq ($(findstring 2070,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_USB -DRT30xx -DRT3070 -DRT2070 -DRTMP_USB_SUPPORT -DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT
CHIPSET_DAT = 2870
endif

ifneq ($(findstring 3070,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_USB -DRT30xx -DRT3070 -DRTMP_USB_SUPPORT -DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DVCORECAL_SUPPORT
CHIPSET_DAT = 2870

ifneq ($(findstring $(RT28xx_MODE),AP),)
ifeq ($(HAS_CS_SUPPORT), y)
WFLAGS += -DCARRIER_DETECTION_FIRMWARE_SUPPORT 
endif
endif

endif

ifneq ($(findstring 2880,$(CHIPSET)),)
WFLAGS += -DRT2880 -DRT28xx -DRTMP_MAC_PCI -DCONFIG_RALINK_RT2880_MP -DRTMP_RBUS_SUPPORT -DMERGE_ARCH_TEAM -DA_BAND_SUPPORT -DCONFIG_SWMCU_SUPPORT
ifeq ($(HAS_WIFI_LED_SHARE), y)
WFLAGS += -DCONFIG_WIFI_LED_SHARE
endif
endif

ifneq ($(findstring 3572,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRT2870 -DRT28xx -DRT30xx -DRT35xx -DRT3572 -DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DA_BAND_SUPPORT -DVCORECAL_SUPPORT
CHIPSET_DAT = 2870

ifneq ($(findstring $(RT28xx_MODE),AP),)
ifeq ($(HAS_CS_SUPPORT), y)
WFLAGS +=  -DCARRIER_DETECTION_FIRMWARE_SUPPORT
endif
endif

endif

ifneq ($(findstring 3573,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRT30xx -DRT35xx -DRT3593 -DRT3573\
          -DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT\
          -DA_BAND_SUPPORT -DDOT11N_SS3_SUPPORT \
		  -DVCORECAL_SUPPORT -DNEW_MBSSID_MODE
#WFLAGS += -DNEW_RATE_ADAPT_SUPPORT
CHIPSET_DAT = 2870

ifneq ($(findstring $(RT28xx_MODE),STA APSTA),)
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT
endif

ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif

ifneq ($(findstring $(RT28xx_MODE),AP),)
ifeq ($(HAS_CS_SUPPORT), y)
WFLAGS +=  -DCARRIER_DETECTION_FIRMWARE_SUPPORT
endif
endif

endif

ifneq ($(findstring 3062,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DRT2860 -DRT28xx -DRT30xx -DRT35xx -DRT3062 -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DVCORECAL_SUPPORT
CHIPSET_DAT = 2860
endif

ifneq ($(findstring 3562,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DRT2860 -DRT28xx -DRT30xx -DRT35xx -DRT3562 -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DA_BAND_SUPPORT -DVCORECAL_SUPPORT

CHIPSET_DAT = 2860
endif

ifneq ($(findstring 3593,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DDOT11N_SS3_SUPPORT -DRT3593 -DRT28xx -DRT30xx -DRT35xx -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DA_BAND_SUPPORT -DNEW_MBSSID_MODE -DVCORECAL_SUPPORT

#WFLAGS += -DNEW_RATE_ADAPT_SUPPORT
CHIPSET_DAT = 2860

ifneq ($(findstring $(RT28xx_MODE),STA APSTA),)
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT
endif

ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif

ifneq ($(findstring 3390,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DRT30xx -DRT33xx -DRT3090 -DRT3390 -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DRTMP_INTERNAL_TX_ALC -DVCORECAL_SUPPORT
CHIPSET_DAT = 2860
endif

ifneq ($(findstring 8592,$(CHIPSET)),)
WFLAGS += -DRT8592 -DRT65xx -DRLT_MAC -DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DA_BAND_SUPPORT -DRX_DMA_SCATTER
WFLAGS += -DRTMP_RF_RW_SUPPORT -DIQ_CAL_SUPPORT -DVCORECAL_SUPPORT
#WFLAGS += -DRTMP_EFUSE_SUPPORT 
ifneq ($(findstring $(RT28xx_MODE),AP),)
# TODO: shiang-6590, need to ask hardware about the memory base setting first!!
#WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
CHIPSET_DAT = 2860
endif

ifneq ($(findstring 6590,$(CHIPSET)),)
WFLAGS += -DRT6590 -DRT65xx -DRLT_MAC -DRLT_RF -DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DA_BAND_SUPPORT -DRX_DMA_SCATTER  
#-DRTMP_FREQ_CALIBRATION_SUPPORT -DVCORECAL_SUPPORT
ifneq ($(findstring $(RT28xx_MODE),AP),)
#WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
CHIPSET_DAT = 2860
endif


ifneq ($(findstring 6570,$(CHIPSET)),)
WFLAGS += -DRT6570 -DRT65xx -DRLT_MAC -DRLT_RF -DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRTMP_TIMER_TASK_SUPPORT -DA_BAND_SUPPORT -DRX_DMA_SCATTER -DRTMP_EFUSE_SUPPORT -DNEW_MBSSID_MODE
ifneq ($(findstring $(RT28xx_MODE),AP),)
#WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif

ifeq ($(HAS_CSO_SUPPORT), y)
WFLAGS += -DCONFIG_CSO_SUPPORT 
endif

ifeq ($(HAS_TSO_SUPPORT), y)
WFLAGS += -DCONFIG_CSO_SUPPORT -DCONFIG_TSO_SUPPORT -DTX_PKT_SG
endif

CHIPSET_DAT = 2870
endif

ifneq ($(findstring 7601E,$(CHIPSET)),)
WFLAGS += -DMT7601E -DMT7601 -DRLT_MAC -DRLT_RF -DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DRX_DMA_SCATTER -DVCORECAL_SUPPORT -DVCORECAL_SUPPORT -DRTMP_EFUSE_SUPPORT -DhNEW_MBSSID_MODE -DRTMP_INTERNAL_TX_ALC -DCONFIG_ANDES_SUPPORT
#-DRTMP_FREQ_CALIBRATION_SUPPORT
ifneq ($(findstring $(RT28xx_MODE),AP),)
#WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif

ifneq ($(findstring $(RT28xx_MODE),STA APSTA),)
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT
endif

CHIPSET_DAT = 2860
endif


ifneq ($(findstring 7601U,$(CHIPSET)),)
WFLAGS += -DMT7601U -DMT7601 -DRLT_MAC -DRLT_RF -DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRTMP_TIMER_TASK_SUPPORT -DRX_DMA_SCATTER -DVCORECAL_SUPPORT -DRTMP_EFUSE_SUPPORT -DNEW_MBSSID_MODE -DRTMP_INTERNAL_TX_ALC -DCONFIG_ANDES_SUPPORT -DDPD_CALIBRATION_SUPPORT
ifneq ($(findstring $(RT28xx_MODE),AP),)
#WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif

ifeq ($(HAS_RX_CSO_SUPPORT), y)
WFLAGS += -DCONFIG_RX_CSO_SUPPORT
endif

ifneq ($(findstring $(RT28xx_MODE),AP),)
else
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT
endif

CHIPSET_DAT = 2870
endif

ifneq ($(findstring 3370,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_USB -DRT30xx -DRT33xx -DRT3070 -DRT3370 -DRTMP_USB_SUPPORT -DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DRTMP_INTERNAL_TX_ALC -DVCORECAL_SUPPORT
CHIPSET_DAT = 2870

ifneq ($(findstring $(RT28xx_MODE),AP),)
ifeq ($(HAS_CS_SUPPORT), y)
WFLAGS +=  -DCARRIER_DETECTION_FIRMWARE_SUPPORT
endif
endif

endif

ifneq ($(findstring 5390,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DRT30xx -DRT33xx -DRT3090 -DRT3390 -DRT5390 -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DRTMP_FREQ_CALIBRATION_SUPPORT -DRTMP_INTERNAL_TX_ALC -DVCORECAL_SUPPORT -DIQ_CAL_SUPPORT -DNEW_MBSSID_MODE -DRTMP_TEMPERATURE_COMPENSATION -DRTMP_MAC
CHIPSET_DAT = 2860

ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif

ifneq ($(findstring 5370,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_USB -DRT30xx -DRT33xx -DRT3070 -DRT3370 -DRT5370 -DRTMP_USB_SUPPORT -DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DRTMP_INTERNAL_TX_ALC -DRTMP_FREQ_CALIBRATION_SUPPORT -DVCORECAL_SUPPORT -DIQ_CAL_SUPPORT -DNEW_MBSSID_MODE -DRTMP_TEMPERATURE_COMPENSATION -DRTMP_MAC
CHIPSET_DAT = 2870

ifneq ($(findstring $(RT28xx_MODE),AP),)
ifeq ($(HAS_CS_SUPPORT), y)
WFLAGS +=  -DCARRIER_DETECTION_FIRMWARE_SUPPORT
endif
endif

ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif

ifneq ($(findstring 3052,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_PCI -DRTMP_RBUS_SUPPORT -DRT3052 -DRT305x -DRTMP_RF_RW_SUPPORT -DCONFIG_SWMCU_SUPPORT -DVCORECAL_SUPPORT
CHIPSET_DAT = 2870
ifeq ($(HAS_WIFI_LED_SHARE), y)
WFLAGS += -DCONFIG_WIFI_LED_SHARE
endif
endif

ifneq ($(findstring 3352,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_PCI -DRTMP_RBUS_SUPPORT -DRT3352 -DRT305x -DRTMP_RF_RW_SUPPORT -DVCORECAL_SUPPORT -DCONFIG_SWMCU_SUPPORT -DRTMP_INTERNAL_TX_ALC -DNEW_MBSSID_MODE
CHIPSET_DAT = 2860
ifeq ($(HAS_WIFI_LED_SHARE), y)
WFLAGS += -DCONFIG_WIFI_LED_SHARE
endif
ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif

ifneq ($(findstring 5350,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_PCI -DRTMP_RBUS_SUPPORT -DRT5350 -DRT305x -DRT3050 -DRT3350 -DRTMP_RF_RW_SUPPORT -DVCORECAL_SUPPORT -DCONFIG_SWMCU_SUPPORT -DRTMP_INTERNAL_TX_ALC -DRTMP_FREQ_CALIBRATION_SUPPORT -DIQ_CAL_SUPPORT -DNEW_MBSSID_MODE
CHIPSET_DAT = 2860
ifeq ($(HAS_WIFI_LED_SHARE), y)
WFLAGS += -DCONFIG_WIFI_LED_SHARE
endif
ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif

ifneq ($(findstring 5592,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DRT30xx -DRT5592\
		  -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT\
		  -DA_BAND_SUPPORT -DIQ_CAL_SUPPORT -DRX_DMA_SCATTER -DVCORECAL_SUPPORT\
          -DNEW_MBSSID_MODE -DRTMP_TEMPERATURE_COMPENSATION
CHIPSET_DAT = 2860
ifeq ($(HAS_CSO_SUPPORT), y)
WFLAGS += -DCONFIG_CSO_SUPPORT
endif

ifneq ($(findstring $(RT28xx_MODE),STA APSTA),)
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT
endif

ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif

endif

ifneq ($(findstring 5572,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRT30xx -DRT5572 -DRT5592\
		  -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DNEW_MBSSID_MODE\
		  -DRTMP_TIMER_TASK_SUPPORT -DA_BAND_SUPPORT -DIQ_CAL_SUPPORT -DVCORECAL_SUPPORT\
		  -DRTMP_TEMPERATURE_COMPENSATION
CHIPSET_DAT = 2870
ifeq ($(HAS_CSO_SUPPORT), y)
WFLAGS += -DCONFIG_CSO_SUPPORT
endif

ifneq ($(findstring $(RT28xx_MODE),AP),)
ifeq ($(HAS_CS_SUPPORT), y)
WFLAGS +=  -DCARRIER_DETECTION_FIRMWARE_SUPPORT 
endif
endif

ifneq ($(findstring $(RT28xx_MODE),STA APSTA),)
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT
endif

ifneq ($(findstring $(RT28xx_MODE),AP),)
#WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif

endif

ifneq ($(findstring 3290,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DRTMP_FREQ_CALIBRATION_SUPPORT -DRTMP_INTERNAL_TX_ALC -DRT30xx -DRT3290 -DVCORECAL_SUPPORT
CHIPSET_DAT = 2860

ifneq ($(findstring $(RT28xx_MODE),STA APSTA),)
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT -DPCIE_PS_SUPPORT
endif

ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif


ifeq ($(CHIPSET),USB)
#3572
WFLAGS +=-DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRT2870 -DRT28xx -DRT30xx -DRT35xx -DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DA_BAND_SUPPORT -DSPECIFIC_VCORECAL_SUPPORT
#3370
WFLAGS += -DRT33xx -DRT3070 -DRT3370 -DRTMP_TIMER_TASK_SUPPORT -DRTMP_INTERNAL_TX_ALC
CHIPSET_DAT = 2870
endif


ifeq ($(CHIPSET),PCI)
#3562		
WFLAGS +=-DRTMP_MAC_PCI -DRT2860 -DRT28xx -DRT30xx -DRT35xx -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DA_BAND_SUPPORT -DSPECIFIC_VCORECAL_SUPPORT
#3390
WFLAGS +=-DRT33xx -DRT3090 -DRT3390 -DRTMP_INTERNAL_TX_ALC
endif


ifeq ($(CHIPSET),RBUS)
WFLAGS += -DMERGE_ARCH_TEAM -DCONFIG_SWMCU_SUPPORT -DCONFIG_RA_NAT_NONE -DRTMP_RBUS_SUPPORT
#5350, 3050, 3350, 3883
WFLAGS +=-DRTMP_MAC_PCI -DRT305x -DRT5350 -DRT3050 -DRT3350 -DRT3883 -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DA_BAND_SUPPORT -DVCORECAL_SUPPORT

ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
#WFLAGS += -DDBG_CTRL_SUPPORT 
#WFLAGS += -DINCLUDE_DEBUG_QUEUE
#WFLAGS += -DRANGE_EXTEND -DCFO_TRACK -DPRE_ANT_SWITCH
endif


#################################################


ifeq ($(PLATFORM),5VT)
#WFLAGS += -DCONFIG_5VT_ENHANCE
endif

ifeq ($(HAS_BLOCK_NET_IF),y)
WFLAGS += -DBLOCK_NET_IF
endif

ifeq ($(HAS_DFS_SUPPORT),y)
WFLAGS += -DDFS_SUPPORT
endif

ifeq ($(HAS_MC_SUPPORT),y)
WFLAGS += -DMULTIPLE_CARD_SUPPORT
endif

ifeq ($(HAS_LLTD),y)
WFLAGS += -DLLTD_SUPPORT
endif

ifeq ($(PLATFORM),RMI)
WFLAGS += -DRT_BIG_ENDIAN 
endif

ifeq ($(PLATFORM),UBICOM_IPX8)
WFLAGS += -DRT_BIG_ENDIAN -DUNALIGNMENT_SUPPORT -DPLATFORM_UBM_IPX8 -DNO_CONSISTENT_MEM_SUPPORT -DCACHE_LINE_32B
endif

ifeq ($(PLATFORM),BL2348)
WFLAGS += -DRT_BIG_ENDIAN
endif

ifeq ($(PLATFORM),BL23570)
WFLAGS += -DRT_BIG_ENDIAN
endif

ifeq ($(PLATFORM),BLUBB)
WFLAGS += -DRT_BIG_ENDIAN
endif

ifeq ($(PLATFORM),BLPMP)
WFLAGS += -DRT_BIG_ENDIAN
endif

ifeq ($(PLATFORM),RMI_64)
WFLAGS += -DRT_BIG_ENDIAN 
endif
ifeq ($(PLATFORM),IXP)
WFLAGS += -DRT_BIG_ENDIAN
endif

ifeq ($(PLATFORM),IKANOS_V160)
WFLAGS += -DRT_BIG_ENDIAN -DIKANOS_VX_1X0
endif

ifeq ($(PLATFORM),IKANOS_V180)
WFLAGS += -DRT_BIG_ENDIAN -DIKANOS_VX_1X0
endif

ifeq ($(PLATFORM),INF_TWINPASS)
WFLAGS += -DRT_BIG_ENDIAN -DINF_TWINPASS
endif

ifeq ($(PLATFORM),INF_DANUBE)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
# Linux 2.4
WFLAGS += -DINF_DANUBE -DRT_BIG_ENDIAN
else
# Linux 2.6
WFLAGS += -DRT_BIG_ENDIAN
endif
endif

ifeq ($(PLATFORM),INF_AR9)
WFLAGS += -DRT_BIG_ENDIAN -DINF_AR9
# support MAPI function for AR9.
#WFLAGS += -DAR9_MAPI_SUPPORT
endif

ifeq ($(PLATFORM),INF_VR9)
WFLAGS += -DRT_BIG_ENDIAN -DINF_AR9 -DINF_VR9
endif

ifeq ($(PLATFORM),CAVM_OCTEON)
WFLAGS += -DRT_BIG_ENDIAN
endif

ifeq ($(PLATFORM),BRCM_6358)
WFLAGS += -DRT_BIG_ENDIAN -DBRCM_6358
endif

ifeq ($(PLATFORM),INF_AMAZON_SE)
WFLAGS += -DRT_BIG_ENDIAN -DINF_AMAZON_SE
endif

ifeq ($(PLATFORM),RALINK_3052)
WFLAGS += -DPLATFORM_RALINK_3052
endif

ifeq ($(PLATFORM),FREESCALE8377)
#EXTRA_CFLAGS := -v -I$(RT28xx_DIR)/include -I$(LINUX_SRC)/include $(WFLAGS)-O2 -Wall -Wstrict-prototypes -Wno-trigraphs 
#export EXTRA_CFLAGS
WFLAGS += -DRT_BIG_ENDIAN
EXTRA_CFLAGS := $(WFLAGS) -I$(RT28xx_DIR)/include
endif

ifeq ($(PLATFORM),ST)
#WFLAGS += -DST
WFLAGS += -DST
endif

#kernel build options for 2.4
# move to Makefile outside LINUX_SRC := /opt/star/kernel/linux-2.4.27-star

ifeq ($(PLATFORM),RALINK_3052)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe  -finline-limit=100000 -march=mips2 -mabi=32 -Wa,--trap -DLINUX -nostdinc -iwithprefix include $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM), RALINK_2880)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe  -finline-limit=100000 -march=mips2 -mabi=32 -Wa,--trap -DLINUX -nostdinc -iwithprefix include $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),STAR)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -Uarm -fno-common -pipe -mapcs-32 -D__LINUX_ARM_ARCH__=4 -march=armv4  -mshort-load-bytes -msoft-float -Uarm -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)

export CFLAGS
endif

ifeq ($(PLATFORM),MSTARTV)
EXTRA_CFLAGS += $(WFLAGS) -I$(RT28xx_DIR)/include
export EXTRA_CFLAGS
endif

ifeq ($(PLATFORM),UBICOM_IPX8)
EXTRA_CFLAGS += $(WFLAGS) 
export EXTRA_CFLAGS
endif

ifeq ($(PLATFORM),SIGMA)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -DEM86XX_CHIP=EM86XX_CHIPID_TANGO2 -DEM86XX_REVISION=6 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT2860_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2     -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe  -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -DMODULE $(WFLAGS) -DSIGMA863X_PLATFORM

export CFLAGS
endif

ifeq ($(PLATFORM),SIGMA_8622)
CFLAGS := -D__KERNEL__ -I$(CROSS_COMPILE_INCLUDE)/include -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fno-common -pipe -fno-builtin -D__linux__ -DNO_MM -mapcs-32 -march=armv4 -mtune=arm7tdmi -msoft-float -DMODULE -mshort-load-bytes -nostdinc -iwithprefix -DMODULE $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),5VT)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -mlittle-endian -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O3 -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-omit-frame-pointer -mapcs -mno-sched-prolog -mabi=apcs-gnu -mno-thumb-interwork -D__LINUX_ARM_ARCH__=5 -march=armv5te -mtune=arm926ej-s --param max-inline-insns-single=40000  -Uarm -Wdeclaration-after-statement -Wno-pointer-sign -DMODULE $(WFLAGS) 

export CFLAGS
endif

ifeq ($(PLATFORM),IKANOS_V160)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-generic -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -march=lx4189 -Wa, -DMODULE $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),IKANOS_V180)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-generic -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -mips32r2 -Wa, -DMODULE $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),INF_TWINPASS)
CFLAGS := -D__KERNEL__ -DMODULE -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -G 0 -mno-abicalls -fno-pic -march=4kc -mips32 -Wa,--trap -pipe -mlong-calls $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),INF_DANUBE)
	ifneq (,$(findstring 2.4,$(LINUX_SRC)))
	CFLAGS := $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float  -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
	else
	CFLAGS := $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float  -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
	endif
export CFLAGS
endif

ifeq ($(PLATFORM),INF_AR9)
CFLAGS := $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -fno-pic -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float  -mabi=32 -mlong-calls -march=mips32r2 -mtune=34kc -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
export CFLAGS
endif

ifeq ($(PLATFORM),INF_VR9)
CFLAGS := $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -fno-pic -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float  -mabi=32 -mlong-calls -march=mips32r2 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
export CFLAGS
endif

ifeq ($(PLATFORM),BRCM_6358)
CFLAGS := $(WFLAGS) -nostdinc -iwithprefix include -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -I $(LINUX_SRC)/include/asm/gcc -G 0 -mno-abicalls -fno-pic -pipe  -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-bcm963xx -I$(LINUX_SRC)/include/asm-mips/mach-generic  -Os -fomit-frame-pointer -Wdeclaration-after-statement  -DMODULE -mlong-calls
export CFLAGS
endif

ifeq ($(PLATFORM),INF_AMAZON_SE)
CFLAGS := -D__KERNEL__ -DMODULE=1 -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -DCONFIG_IFX_ALG_QOS -DCONFIG_WAN_VLAN_SUPPORT -fomit-frame-pointer -DIFX_PPPOE_FRAME -G 0 -fno-pic -mno-abicalls -mlong-calls -pipe -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -nostdinc -iwithprefix include $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),ST)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -Wall -O2 -Wundef -Wstrict-prototypes -Wno-trigraphs -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-aliasing -fno-common -fomit-frame-pointer -ffreestanding -m4-nofpu -o $(WFLAGS) 
export CFLAGS
endif

ifeq ($(PLATFORM),PC)
    ifneq (,$(findstring 2.4,$(LINUX_SRC)))
	# Linux 2.4
	CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)
	export CFLAGS
    else
	# Linux 2.6
	EXTRA_CFLAGS := $(WFLAGS) 
    endif
endif

ifeq ($(PLATFORM),INTELP6)
	EXTRA_CFLAGS := $(WFLAGS) 
endif

#If the kernel version of RMI is newer than 2.6.27, please change "CFLAGS" to "EXTRA_FLAGS"
ifeq ($(PLATFORM),RMI)
EXTRA_CFLAGS := -D__KERNEL__ -DMODULE=1 -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm-mips/mach-generic -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -DCONFIG_IFX_ALG_QOS -DCONFIG_WAN_VLAN_SUPPORT -fomit-frame-pointer -DIFX_PPPOE_FRAME -G 0 -fno-pic -mno-abicalls -mlong-calls -pipe -finline-limit=100000 -mabi=32 -G 0 -mno-abicalls -fno-pic -pipe -msoft-float -march=xlr -ffreestanding  -march=xlr -Wa,--trap, -nostdinc -iwithprefix include $(WFLAGS)
export EXTRA_CFLAGS
endif

ifeq ($(PLATFORM),RMI_64)
EXTRA_CFLAGS := -D__KERNEL__ -DMODULE=1 -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm-mips/mach-generic -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -DCONFIG_IFX_ALG_QOS -DCONFIG_WAN_VLAN_SUPPORT -fomit-frame-pointer -DIFX_PPPOE_FRAME -G 0 -fno-pic -mno-abicalls -mlong-calls -pipe -finline-limit=100000 -mabi=64 -G 0 -mno-abicalls -fno-pic -pipe -msoft-float -march=xlr -ffreestanding  -march=xlr -Wa,--trap, -nostdinc -iwithprefix include $(WFLAGS)
export EXTRA_CFLAGS
endif

ifeq ($(PLATFORM),IXP)
	CFLAGS := -v -D__KERNEL__ -DMODULE -I$(LINUX_SRC)/include -mbig-endian -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -Uarm -fno-common -pipe -mapcs-32 -D__LINUX_ARM_ARCH__=5 -mcpu=xscale -mtune=xscale -malignment-traps -msoft-float $(WFLAGS)
        EXTRA_CFLAGS := -v $(WFLAGS) -mbig-endian
	export CFLAGS        
endif

ifeq ($(PLATFORM),SMDK)
        EXTRA_CFLAGS := $(WFLAGS) 
endif

ifeq ($(PLATFORM),CAVM_OCTEON)
	EXTRA_CFLAGS := $(WFLAGS) -mabi=64 $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),DM6446)
	CFLAGS := -nostdinc -iwithprefix include -D__KERNEL__ -I$(LINUX_SRC)/include  -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Os -fno-omit-frame-pointer -fno-omit-frame-pointer -mapcs -mno-sched-prolog -mlittle-endian -mabi=apcs-gnu -D__LINUX_ARM_ARCH__=5 -march=armv5te -mtune=arm9tdmi -msoft-float -Uarm -Wdeclaration-after-statement -c -o $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),BL2348)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -DEM86XX_CHIP=EM86XX_CHIPID_TANGO2 -DEM86XX_REVISION=6 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT2860_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2     -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe  -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -DMODULE $(WFLAGS) -DSIGMA863X_PLATFORM -DEXPORT_SYMTAB -DPLATFORM_BL2348
export CFLAGS
endif

ifeq ($(PLATFORM),BL23570)
EXTRA_CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -DEM86XX_CHIP=EM86XX_CHIPID_TANGO2 -DEM86XX_REVISION=6 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT2860_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2     -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe  -mabi=32 -march=74kc -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -DMODULE $(WFLAGS) -DSIGMA863X_PLATFORM -DEXPORT_SYMTAB -DPLATFORM_BL23570
export EXTRA_CFLAGS
endif

ifeq ($(PLATFORM),BLUBB)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -DEM86XX_CHIP=EM86XX_CHIPID_TANGO2 -DEM86XX_REVISION=6 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT2860_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2     -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe  -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -DMODULE $(WFLAGS) -DSIGMA863X_PLATFORM -DEXPORT_SYMTAB -DPLATFORM_BL2348
export CFLAGS
endif

ifeq ($(PLATFORM),BLPMP)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -DEM86XX_CHIP=EM86XX_CHIPID_TANGO2 -DEM86XX_REVISION=6 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT2860_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2     -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe  -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -DMODULE $(WFLAGS) -DSIGMA863X_PLATFORM -DEXPORT_SYMTAB
export CFLAGS
endif

ifeq ($(PLATFORM),MT85XX)
    ifneq (,$(findstring 2.4,$(LINUX_SRC)))
	# Linux 2.4
	CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)
	export CFLAGS
    else
	# Linux 2.6
	EXTRA_CFLAGS += $(WFLAGS) -DMT85XX
	EXTRA_CFLAGS += -D _NO_TYPEDEF_BOOL_ \
	                -D _NO_TYPEDEF_UCHAR_ \
	                -D _NO_TYPEDEF_UINT8_ \
	                -D _NO_TYPEDEF_UINT16_ \
	                -D _NO_TYPEDEF_UINT32_ \
	                -D _NO_TYPEDEF_UINT64_ \
	                -D _NO_TYPEDEF_CHAR_ \
	                -D _NO_TYPEDEF_INT16_ \
	                -D _NO_TYPEDEF_INT32_ \
	                -D _NO_TYPEDEF_INT64_ \
	                
    endif
endif

ifeq ($(PLATFORM),MT53XX)
    ifneq (,$(findstring 2.4,$(LINUX_SRC)))
	# Linux 2.4
	CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)
	export CFLAGS
    else
	# Linux 2.6 and newer
	EXTRA_CFLAGS += $(WFLAGS)
    endif
endif

ifeq ($(PLATFORM),NXP_TV550)
    ifneq (,$(findstring 2.4,$(LINUX_SRC)))
        # Linux 2.4
        CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=mips -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)
        export CFLAGS
    else
        # Linux 2.6
        EXTRA_CFLAGS := $(WFLAGS)
    endif
endif

ifeq ($(PLATFORM),MVL5)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -mlittle-endian -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O3 -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-omit-frame-pointer -mapcs -mno-sched-prolog -mno-thumb-interwork -D__LINUX_ARM_ARCH__=5 -march=armv5te -mtune=arm926ej-s --param max-inline-insns-single=40000  -Uarm -Wdeclaration-after-statement -Wno-pointer-sign -DMODULE $(WFLAGS) 
export CFLAGS
endif

ifeq ($(PLATFORM),RALINK_3352)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe  -finline-limit=100000 -march=mips2 -mabi=32 -Wa,--trap -DLINUX -nostdinc -iwithprefix include $(WFLAGS)
export CFLAGS
endif

Voilà, désolé si c'est un peu lourd.
Merci d'avance de votre aide.

PS : j'ai peut-être fait une bêtise en mettant les deux HAS_NATIVE_WPA_SUPPLICANT_SUPPORT du fichier config.mk sur oui.

Dernière modification par ireachthesun (Le 03/09/2017, à 23:50)

ireachthesun · Le 15/08/2017, à 05:47

Informations plus complètes :

cat /etc/lsb-release

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.10
DISTRIB_CODENAME=yakkety
DISTRIB_DESCRIPTION="Ubuntu 16.10"

lsusb

Bus 002 Device 003: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

lspci

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
04:00.0 Ethernet controller: Broadcom Limited NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
0e:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0e:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0e:06.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)

lspci -k -nn | grep -A 3 -i net

04:00.0 Ethernet controller [0200]: Broadcom Limited NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
	Subsystem: COMPAL Electronics Inc NetLink BCM5906M Fast Ethernet PCI Express [14c0:0026]
	Kernel driver in use: tg3
	Kernel modules: tg3
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
	Subsystem: Intel Corporation WM3945ABG MOW2 [8086:1001]
	Kernel driver in use: iwl3945
	Kernel modules: iwl3945

lspci -k

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
	Subsystem: COMPAL Electronics Inc Mobile PM965/GM965/GL960 Memory Controller Hub
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
	Subsystem: COMPAL Electronics Inc Mobile GM965/GL960 Integrated Graphics Controller (primary)
	Kernel driver in use: i915
	Kernel modules: i915, intelfb
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
	Subsystem: COMPAL Electronics Inc Mobile GM965/GL960 Integrated Graphics Controller (secondary)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
	Subsystem: COMPAL Electronics Inc 82801H (ICH8 Family) USB UHCI Controller
	Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
	Subsystem: COMPAL Electronics Inc 82801H (ICH8 Family) USB UHCI Controller
	Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
	Subsystem: COMPAL Electronics Inc 82801H (ICH8 Family) USB2 EHCI Controller
	Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
	Subsystem: COMPAL Electronics Inc 82801H (ICH8 Family) HD Audio Controller
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
	Subsystem: COMPAL Electronics Inc 82801H (ICH8 Family) USB UHCI Controller
	Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
	Subsystem: COMPAL Electronics Inc 82801H (ICH8 Family) USB UHCI Controller
	Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
	Subsystem: COMPAL Electronics Inc 82801H (ICH8 Family) USB UHCI Controller
	Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
	Subsystem: COMPAL Electronics Inc 82801H (ICH8 Family) USB2 EHCI Controller
	Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
	Subsystem: COMPAL Electronics Inc 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller
	Kernel driver in use: ata_piix
	Kernel modules: pata_acpi
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03)
	Subsystem: COMPAL Electronics Inc 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode]
	Kernel driver in use: ahci
	Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
	Subsystem: COMPAL Electronics Inc 82801H (ICH8 Family) SMBus Controller
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
04:00.0 Ethernet controller: Broadcom Limited NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
	Subsystem: COMPAL Electronics Inc NetLink BCM5906M Fast Ethernet PCI Express
	Kernel driver in use: tg3
	Kernel modules: tg3
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
	Subsystem: Intel Corporation WM3945ABG MOW2
	Kernel driver in use: iwl3945
	Kernel modules: iwl3945
0e:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
	Subsystem: COMPAL Electronics Inc R5C832 IEEE 1394 Controller
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire_ohci
0e:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
	Subsystem: COMPAL Electronics Inc R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci_pci
0e:06.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
	Subsystem: COMPAL Electronics Inc R5C592 Memory Stick Bus Host Adapter
	Kernel driver in use: r592
	Kernel modules: r592

sudo lshw -C network

  *-network                 
       description: Ethernet interface
       produit: NetLink BCM5906M Fast Ethernet PCI Express
       fabriquant: Broadcom Limited
       identifiant matériel: 0
       information bus: pci@0000:04:00.0
       nom logique: enp4s0
       version: 02
       numéro de série: 00:16:d4:de:d4:29
       taille: 100Mbit/s
       capacité: 100Mbit/s
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=sb v3.04 ip= latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       ressources: irq:34 mémoire:f4000000-f400ffff
  *-network DÉSACTIVÉ
       description: Interface réseau sans fil
       produit: PRO/Wireless 3945ABG [Golan] Network Connection
       fabriquant: Intel Corporation
       identifiant matériel: 0
       information bus: pci@0000:0c:00.0
       nom logique: wlp12s0
       version: 02
       numéro de série: 00:19:d2:bb:4e:48
       bits: 32 bits
       horloge: 33MHz
       fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=iwl3945 driverversion=4.8.0-59-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11
       ressources: irq:32 mémoire:f8200000-f8200fff
  *-network DÉSACTIVÉ
       description: Interface réseau sans fil
       identifiant matériel: 1
       information bus: usb@2:5
       nom logique: wlxf428530c38ab
       numéro de série: f4:28:53:0c:38:ab
       fonctionnalités: ethernet physical wireless
       configuration: broadcast=yes driver=mt7601u driverversion=4.8.0-59-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11

lsmod

Module                  Size  Used by
pci_stub               16384  1
vboxpci                24576  0
vboxnetadp             28672  0
vboxnetflt             28672  0
vboxdrv               352256  4 vboxnetadp,vboxnetflt,vboxpci
dm_crypt               24576  1
i2c_i801               28672  0
mt7601u                86016  0
coretemp               16384  0
kvm_intel             192512  0
kvm                   520192  1 kvm_intel
snd_hda_codec_si3054    16384  1
snd_hda_codec_realtek    77824  1
irqbypass              16384  1 kvm
snd_hda_codec_generic    69632  1 snd_hda_codec_realtek
joydev                 20480  0
snd_hda_intel          32768  6
snd_hda_codec         118784  4 snd_hda_intel,snd_hda_codec_generic,snd_hda_codec_si3054,snd_hda_codec_realtek
input_leds             16384  0
serio_raw              16384  0
snd_hda_core           69632  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_generic,snd_hda_codec_si3054,snd_hda_codec_realtek
arc4                   16384  4
snd_hwdep              16384  1 snd_hda_codec
snd_pcm                94208  6 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_si3054
iwl3945                65536  0
snd_seq_midi           16384  0
iwlegacy               90112  1 iwl3945
snd_seq_midi_event     16384  1 snd_seq_midi
mac80211              679936  3 mt7601u,iwlegacy,iwl3945
snd_rawmidi            28672  1 snd_seq_midi
i2c_smbus              16384  1 i2c_i801
r592                   20480  0
snd_seq                57344  2 snd_seq_midi_event,snd_seq_midi
memstick               16384  1 r592
cfg80211              512000  4 mac80211,mt7601u,iwlegacy,iwl3945
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  2 snd_seq,snd_pcm
lpc_ich                20480  0
ir_lirc_codec          16384  0
lirc_dev               20480  1 ir_lirc_codec
snd                    69632  21 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_si3054,snd_hda_codec_realtek,snd_pcm
shpchp                 32768  0
rc_rc6_mce             16384  0
soundcore              16384  1 snd
ene_ir                 20480  0
rc_core                28672  5 rc_rc6_mce,ir_lirc_codec,lirc_dev,ene_ir
eeprom                 16384  0
mac_hid                16384  0
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,parport_pc,ppdev
ip_tables              20480  0
x_tables               24576  1 ip_tables
autofs4                40960  2
ahci                   36864  3
psmouse               122880  0
firewire_ohci          36864  0
i915                 1249280  6
sdhci_pci              24576  0
libahci                32768  1 ahci
sdhci                  45056  1 sdhci_pci
firewire_core          65536  1 firewire_ohci
pata_acpi              16384  0
crc_itu_t              16384  1 firewire_core
i2c_algo_bit           16384  1 i915
drm_kms_helper        155648  1 i915
tg3                   159744  0
syscopyarea            16384  1 drm_kms_helper
ptp                    20480  1 tg3
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
pps_core               20480  1 ptp
drm                   311296  8 i915,drm_kms_helper
wmi                    16384  0
fjes                   28672  0
video                  36864  1 i915

iwconfig

enp4s0    no wireless extensions.

wlp12s0   IEEE 802.11  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          
lo        no wireless extensions.

wlxf428530c38ab  IEEE 802.11  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:on

ifconfig

enp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet  netmask 255.255.255.0  broadcast
        inet6 fe80::6802:dc28:324b:13f8  prefixlen 64  scopeid 0x20<link>
        ether 00:16:d4:de:d4:29  txqueuelen 1000  (Ethernet)
        RX packets 870290  bytes 1185008645 (1.1 GB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 524887  bytes 43230501 (43.2 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 17  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Boucle locale)
        RX packets 626957  bytes 38011832 (38.0 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 626957  bytes 38011832 (38.0 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

sudo iwlist scan

enp4s0    Interface doesn't support scanning.

wlp12s0   Interface doesn't support scanning : Network is down

lo        Interface doesn't support scanning.

wlxf428530c38ab  Interface doesn't support scanning : Network is down

uname -r -m

4.8.0-59-generic i686

cat /etc/network/interfaces

# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback

Pas de nm-tool

sudo rfkill list

0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: yes
2: phy2: Wireless LAN
	Soft blocked: no
	Hard blocked: no

nmcli connection show

NOM                     UUID                                  TYPE            PÉRIPHÉRIQUE 
---                      ---                                  802-3-ethernet  enp4s0

Je suis connecté via ethernet et ça marche.

xubu1957 · Le 15/08/2017, à 06:09

Bonjour,

sudo rfkill list

0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: yes

Doc : wifi#activer_un_wi-fi_desactive

§ 4.1 a écrit :

Si après Soft blocked vous avez un yes, alors le Wi-Fi est bloqué de façon logicielle, par contre si vous avez un yes après Hard blocked c'est que votre Wi-Fi est bloqué matériellement par un bouton dédié.

ou une combinaison de touches Fn + F n° ? .

DISTRIB_RELEASE=16.10
DISTRIB_CODENAME=yakkety

ta version yakkety

Depuis le 20 juillet 2017, Ubuntu 16.10 est en fin de vie . Elle ne profite plus de nouvelle mise à jour de sécurité et les paquets logiciels pour cette version sont déplacés dans des serveurs d'archive. Pour continuer à recevoir des mises à jour de sécurité, veuillez mettre à niveau votre version d'Ubuntu vers une version activement soutenue.

Dernière modification par xubu1957 (Le 15/08/2017, à 06:13)

cqfd93 · Le 15/08/2017, à 06:10

Bonjour,

Tout d'abord, bienvenue sur ce forum et sur Ubuntu ! Je tiens à saluer l'énorme effort que tu as fait pour donner un maximum d'informations sur ton système afin que les spécialistes du wifi puissent t'aider efficacement.

Je ne suis pas spécialisée dans ce domaine mais avant d'aller plus loin, il faut que tu saches que ta version d'Ubuntu est arrivée en fin de vie en juillet (16.10 est sortie en octobre 2016 et n'était maintenue que pendant 9 mois, donc jusqu'en juillet 2017). Ça ne vaut dont peut-être pas vraiment le coup de se casser la tête à compiler un pilote pour une version obsolète.

Il serait donc préférable de passer à une version encore maintenue et dans ce cas, c'est soit une migration vers 17.04 (qui n'est maintenue que pendant 9 mois) ou une réinstallation complète de 16.04 (LTS maintenue 5 ans jusqu'en avril 2021).

Bien sûr avant d'installer une autre version, il est bon de l'essayer en live et qui sait, il y a peut-être un pilote disponible.

xubu1957 · Le 15/08/2017, à 06:20

Un cas résolu : [Résolu] intallation du pilote Ralink 7601 pour dongle wifi

Sélénia a écrit :

xubu1957 a écrit :
J'ai trouvé un lien pour le:
Bus 001 Device 004: ID 148f:7601 Ralink Technology, Corp. 
7601-wifi-adapter-installation
mais mon anglais est insuffisant !
Bonjour,
Sur la page page askubuntu, une des suggestions est d'installer le driver via un PPA en lançant les commandes suivantes dans un terminal :
sudo apt-add-repository ppa:thopiekar/mt7601
sudo apt-get update
sudo apt-get install mt7601-sta-dkms

ireachthesun · Le 15/08/2017, à 06:27

Bonjour, merci beaucoup de votre accueil et de votre disponibilité !

Alors pour la carte wifi intégrée, elle est effectivement "hard blocked", l'interrupteur dédié ne répond plus hélas, ça doit être un truc tout bête mais qui nécessite un peu de spéléologie matérielle. C'est pour cela que j'ai opté pour le dongle usb. Je m'y pencherai certainement un autre jour.

Quant à ma version, je vais passer à la 17.04 dans la journée et je vous tiens au courant de la disponibilité du pilote.

ireachthesun · Le 15/08/2017, à 11:09

Bon je suis sur Ubuntu 17.04 maintenant.
J'ai fait pas mal de recherches :

J'ai essayé ceci : https://askubuntu.com/a/554278

I suggest you get a temporary internet connection, ethernet, tethered or whatever is available. Then do:
sudo apt-get install linux-headers-generic build-essential git
git clone https://github.com/art567/mt7601usta.git
cd mt7601usta/src 
make
sudo make install
sudo mkdir -p /etc/Wireless/RT2870STA/
sudo cp RT2870STA.dat /etc/Wireless/RT2870STA/
sudo modprobe mt7601Usta
Your wireless should now be working.

Le pilote s'est bien compilé mais le wifi reste indétectable.

J'ai ensuite essayé la solution de xubu1957 qui selon ce forumeur concerne Ubuntu 14.04 jusqu'à 15.04, nada, les packages de mise à jour ne sont plus disponibles.
Il précise :

Ubuntu 16.04 onward
The adapter just works.

C'est censé fonctionner automatiquement donc. Un autre utilisateur déclare avoir juste réinstallé son système d'exploitation pour que cela fonctionne, sans installation manuelle du pilote. Selon lui son kernel était endommagé. Peut-être que le mien l'est également.

La dernière piste que j'ai eu, et la plus renseignée sur MT7601U, est celle-ci : https://github.com/art567/mt7601usta

Unofficial mt7601u driver
For kernels 3.19 and later a new mac80211 driver was written from scratch by the community. It was done because there is very little chance that this vendor driver will ever become part of official Linux kernel. If you have Linux kernel version between 3.19 and 4.2 you can download the new driver from https://github.com/kuba-moo/mt7601u. If you have Linux 4.2 or later the new driver is already part of the kernel (it's called mt7601u). Note that from Linux 4.2 on you will have to blacklist the mt7601u driver to continue using code from this repository.
Usage
First install kernel-devel for your Linux distro
$ git clone https://github.com/art567/mt7601usta.git
$ cd mt7601/src
$ make
$ mkdir -p /etc/Wireless/RT2870STA/
$ cp RT2870STA.dat /etc/Wireless/RT2870STA/
$ insmod os/linux/mt7601Usta.ko
If the module has loaded OK, you should see mt7601Usta listed in the output of lsmod and a new network interface ra0 should be present in the output of ip link.
If all goes well, you can permanently install the driver with make install.

J'ai suivi les instructions. Pilote compilé et installé. Quand j'exécute lsmod, mt7601Usta est bien référencé :

lsmod

Module                  Size  Used by
pci_stub               16384  1
vboxpci                24576  0
vboxnetadp             28672  0
vboxnetflt             28672  0
vboxdrv               331776  3 vboxnetadp,vboxnetflt,vboxpci
mt7601Usta            573440  0
crypto_simd            16384  0
cryptd                 24576  1 crypto_simd
aes_i586               20480  3409
dm_crypt               24576  1
mt7601u                86016  0
coretemp               16384  0
kvm_intel             200704  0
kvm                   520192  1 kvm_intel
irqbypass              16384  1 kvm
input_leds             16384  0
joydev                 20480  0
serio_raw              16384  0
i2c_i801               28672  0
lpc_ich                20480  0
r592                   20480  0
memstick               16384  1 r592
snd_hda_codec_si3054    16384  1
snd_hda_codec_realtek    77824  1
arc4                   16384  4
snd_hda_codec_generic    69632  1 snd_hda_codec_realtek
snd_hda_intel          32768  5
snd_hda_codec         114688  4 snd_hda_intel,snd_hda_codec_generic,snd_hda_codec_si3054,snd_hda_codec_realtek
iwl3945                65536  0
iwlegacy               86016  1 iwl3945
mac80211              700416  3 mt7601u,iwlegacy,iwl3945
snd_hda_core           69632  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_generic,snd_hda_codec_si3054,snd_hda_codec_realtek
snd_hwdep              16384  1 snd_hda_codec
cfg80211              532480  4 mac80211,mt7601u,iwlegacy,iwl3945
snd_pcm                94208  5 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_si3054
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            28672  1 snd_seq_midi
snd_seq                57344  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              28672  2 snd_seq,snd_pcm
snd                    65536  20 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_si3054,snd_hda_codec_realtek,snd_pcm
shpchp                 32768  0
soundcore              16384  1 snd
ir_rc6_decoder         16384  0
ir_lirc_codec          16384  0
lirc_dev               20480  1 ir_lirc_codec
eeprom                 16384  0
rc_rc6_mce             16384  0
ene_ir                 20480  0
rc_core                28672  6 ir_rc6_decoder,rc_rc6_mce,ir_lirc_codec,lirc_dev,ene_ir
mac_hid                16384  0
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                45056  3 lp,parport_pc,ppdev
ip_tables              20480  0
x_tables               24576  1 ip_tables
autofs4                40960  2
tg3                   159744  0
i915                 1187840  5
psmouse               122880  0
ahci                   36864  3
firewire_ohci          36864  0
i2c_algo_bit           16384  1 i915
pata_acpi              16384  0
libahci                32768  1 ahci
drm_kms_helper        139264  1 i915
sdhci_pci              28672  0
syscopyarea            16384  1 drm_kms_helper
sdhci                  45056  1 sdhci_pci
ptp                    20480  1 tg3
pps_core               20480  1 ptp
firewire_core          61440  1 firewire_ohci
sysfillrect            16384  1 drm_kms_helper
crc_itu_t              16384  1 firewire_core
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
drm                   303104  6 i915,drm_kms_helper
wmi                    16384  0
fjes                   61440  0
video                  40960  1 i915

En revanche, ra0 n'est pas référencé sur ip link.
ip link

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
    link/ether 00:16:d4:de:d4:29 brd ff:ff:ff:ff:ff:ff
3: wlp12s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 02:a0:3f:0f:a0:f0 brd ff:ff:ff:ff:ff:ff
4: wlxf428530c38ab: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 1a:5d:3b:1b:f8:3b brd ff:ff:ff:ff:ff:ff

Juste avant, l'auteur précise :

Many cheap USB wifi dongles use the MediaTek MT7601U chip.
Unfortunately, there is no driver in Linux kernel source tree which can work with this chip, yet. This repository is based on the original driver released by MediaTek which was rejected from Linux kernel because of the poor code quality.

Je pense donc que le problème ne vient pas du pilote de Mediatek (qui est bien installé) mais de l'interface usb de TOTOLINK (qui est censée fonctionner normalement, non seulement le driver est dispo sur le site de TOTOLINK, mais linux détecte bien la clé usb). La majorité des topics posant le problème du pilote Mediatek MT7601U ont été résolus, mais les rares topics que j'ai trouvé sur TOTOLINK N150USM sont restés sans réponse.

Plusieurs hypothèses donc, mais même problème :
Pas de wifi

Merci quand même de votre aide ! Et si vous localisez le problème, n'hésitez pas à me tenir au courant. En espérant que cela ouvrira des pistes à ceux qui rencontreront le même problème.

xubu1957 · Le 15/08/2017, à 11:37

Essaies :

sudo ifconfig wlxf428530c38ab up

Rajout- En version 17.04, regarde 17-04-wi-fi-not-working-mac-address-keeps-changing

Dernière modification par xubu1957 (Le 15/08/2017, à 11:56)

ireachthesun · Le 15/08/2017, à 12:05

J'ai essayé les deux, ça ne donne rien..

xubu1957 · Le 15/08/2017, à 12:08

Et désactiver le secure-boot ?

Comme pour la MT7630E > [Tuto] Pas de Wi-fi ? Eléments importants à vérifier

Au paragraphe 2 et documentation au dessous.

ireachthesun · Le 15/08/2017, à 13:05

Mon laptop est une vieille machine qui doit avoir un peu plus de 10 ans, elle ne dispose pas de secure-boot par conséquent !
Je pense que le blem réside dans le fait que ra0 n'apparaisse pas sur ip link !

FrancisFDZ · Le 15/08/2017, à 13:13

N'y aurait-il pas un driver à blacklister ? En général, c'est précisé dans un fichier "README" ou "readme.txt" contenu dans le tarbal de compilation.

ireachthesun · Le 15/08/2017, à 13:18

Blacklister ? Kézako ?
Voici le readme exhaustif :

* README
*
* Ralink Tech Inc.
* 
* http://www.ralinktech.com
*

=======================================================================
ModelName:
===========
RT2870 Wireless Lan Linux Driver


=======================================================================
Driver lName:
===========
rt2870.o/rt2870.ko


=======================================================================
Supporting Kernel:
===================
linux kernel 2.4 and 2.6 series. 
Tested in Redhat 7.3 or later.


=======================================================================
Ralink Hardware:
===================
Ralink 802.11n Wireless LAN Card.


=======================================================================
Description:
=============
This is a linux device driver for Ralink RT2870 USB ABGN WLAN Card.


=======================================================================
Contents:
=============
Makefile	        : Makefile
*.c					: c files
*.h					: header files


=======================================================================
Features:
==========
   This driver implements basic IEEE802.11. Infrastructure and adhoc mode with 
   open or shared or WPA-PSK or WPA2-PSK authentication method. 
   NONE, WEP, TKIP and AES encryption. 


=======================================================================
Build Instructions:  
====================

1> $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz
    go to "./DPB_RT2870_Linux_STA_x.x.x.x" directory.
    
2> In Makefile
	 set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
	 define the linux kernel source include file path LINUX_SRC
	 modify to meet your need.

3> In os/linux/config.mk 
	define the GCC and LD of the target machine
	define the compiler flags CFLAGS
	modify to meet your need.
	** Build for being controlled by NetworkManager or wpa_supplicant wext functions
	   Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
	   => #>cd wpa_supplicant-x.x
	   => #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
	** Build for being controlled by WpaSupplicant with Ralink Driver
	   Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
	   => #>cd wpa_supplicant-0.5.7
	   => #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d

4> $make
	# compile driver source code
	# To fix "error: too few arguments to function Ḃċiwe_stream_add_event"
	  => $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c

5> $cp RT2870STA.dat  /etc/Wireless/RT2870STA/RT2870STA.dat
    
6> load driver, go to "os/linux/" directory.
    #[kernel 2.4]
    #    $/sbin/insmod rt2870sta.o
    #    $/sbin/ifconfig ra0 inet YOUR_IP up
        
    #[kernel 2.6]
    #    $/sbin/insmod rt2870sta.ko
    #    $/sbin/ifconfig ra0 inet YOUR_IP up

7> unload driver    
    $/sbin/ifconfig ra0 down
	$/sbin/rmmod rt2870sta
	
=======================================================================
CONFIGURATION:  
====================
RT2870 driver can be configured via following interfaces, 
i.e. (i)"iwconfig" command, (ii)"iwpriv" command, (iii) configuration file

i)  iwconfig comes with kernel.  
ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details.
iii)modify configuration file "RT2870STA.dat" in /etc/Wireless/RT2870STA/RT2870STA.dat.
           
Configuration File : RT2870STA.dat
---------------------------------------
# Copy this file to /etc/Wireless/RT2870STA/RT2870STA.dat
# This file is a binary file and will be read on loading rt.o module.
#
# Use "vi RT2870STA.dat" to modify settings according to your need.
# 
# 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using Infrastructure
# 2.) set Channel to "0" for auto-select on Infrastructure mode
# 3.) set SSID for connecting to your Accss-point.
# 4.) AuthMode can be "WEPAUTO", "OPEN", "SHARED", "WPAPSK", "WPA2PSK", "WPANONE"
# 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES"
# for more information refer to the Readme file.
# 
#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=
SSID=Dennis2860AP
NetworkType=Infra
WirelessMode=9
Channel=0
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
WmmCapable=0
AckPolicy=0;0;0;0
AuthMode=OPEN
EncrypType=NONE
WPAPSK=
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
PSMode=CAM
FastRoaming=0
RoamThreshold=70
HT_RDG=1
HT_EXTCHA=0
HT_OpMode=1
HT_MpduDensity=4
HT_BW=1
HT_AutoBA=1
HT_BADecline=0
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_MCS=33
HT_MIMOPSMode=3
EthConvertMode=
EthCloneMac=
IEEE80211H=0
TGnWifiTest=0
WirelessEvent=0
MeshId=MESH
MeshAutoLink=1
MeshAuthMode=OPEN
MeshEncrypType=NONE
MeshWPAKEY=
MeshDefaultkey=1
MeshWEPKEY=
CarrierDetect=0

-----------------------------------------------
*NOTE:
	WMM parameters
			WmmCapable			Set it as 1 to turn on WMM Qos support				
			AckPolicy1~4		Ack policy which support normal Ack or no Ack
								(AC_BK, AC_BE, AC_VI, AC_VO)		
	
	All WMM parameters do not support iwpriv command but ḂċWmmCapableḂḊḂḊ, 
	please store all parameter to RT2870STA.dat, and restart driver. 	

-----------------------------------------------
syntax is 'Param'='Value' and describes below. 

@> CountryRegion=value                                 
	value
		0: use 1 ~ 11 Channel
		1: use 1 ~ 13 Channel
		2: use 10 ~ 11 Channel
		3: use 10 ~ 13 Channel
		4: use 14 Channel
		5: use 1 ~ 14 Channel
		6: use 3 ~ 9 Channel
		7: use 5 ~ 13 Channel
	   31: use 1 ~ 14 Channel (ch1-11:active scan, ch12-14 passive scan)
   	 	                                      
@> CountryRegionABand=value      							
	value	
		0: use 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 Channel
		1: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Channel
		2: use 36, 40, 44, 48, 52, 56, 60, 64 Channel
		3: use 52, 56, 60, 64, 149, 153, 157, 161 Channel
		4: use 149, 153, 157, 161, 165 Channel
		5: use 149, 153, 157, 161 Channel
		6: use 36, 40, 44, 48 Channel
		7: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 Channel
		8: use 52, 56, 60, 64 Channel
		9: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 Channel
	   10: use 36, 40, 44, 48, 149, 153, 157, 161, 165 Channel
	   11: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 Channel

@> CountryCode=value
	value
		AG, AR, AW, AU, AT, BS, BB, BM, BR, BE, BG, CA, KY, CL, CN, CO, CR, CY, CZ, DK, DO, EC, SV, FI, FR, DE, 
		GR, GU, GT, HT, HN, HK, HU, IS, IN, ID, IE, IL, IT, JP, JO, LV, LI, LT, LU, MY, MT, MA, MX, NL, NZ, NO,
		PE, PT, PL, RO, RU, SA, CS, SG, SK, SI, ZA, KR, ES, SE, CH, TW, TR, GB, UA, AE, US, VE
		"" => using default setting: 2.4 G - ch 1~11; 5G - ch 52~64, 100~140, 149~165
                                                           
@> SSID=value                	
	value
		0~z, 1~32 ascii characters.
                    	
@> WirelessMode=value
	value	
		0: legacy 11b/g mixed 
		1: legacy 11B only 
		2: legacy 11A only         //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
		3: legacy 11a/b/g mixed     //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
		4: legacy 11G only
		5: 11ABGN mixed
		6: 11N only
		7: 11GN mixed
		8: 11AN mixed
		9: 11BGN mixed
	   10: 11AGN mixed	
                     
@> Channel=value
	value
		depends on CountryRegion or CountryRegionABand
                    	
@> BGProtection=value
	value
		0: Auto 
		1: Always on 
		2: Always off
                    	
@> TxPreamble=value
  	value
		0:Preamble Long
		1:Preamble Short 
		2:Auto
                    	
@> RTSThreshold=value
	value
		1~2347                                                       
                    	                                       
@> FragThreshold=value
	value       	
		256~2346
                    	
@> TxBurst=value
	value
		0: Disable
		1: Enable

@> NetworkType=value	    		
	value 
		Infra: infrastructure mode
       	Adhoc: adhoc mode
                                                                                                                                                        	                                                          
@> AuthMode=value
	value
		OPEN	 	For open system	
		SHARED	  	For shared key system	
		WEPAUTO     Auto switch between OPEN and SHARED
		WPAPSK      For WPA pre-shared key  (Infra)
		WPA2PSK     For WPA2 pre-shared key (Infra)
		WPANONE		For WPA pre-shared key  (Adhoc)
		WPA         Use WPA-Supplicant
		WPA2        Use WPA-Supplicant

@> EncrypType=value
	value
		NONE		For AuthMode=OPEN                    
		WEP			For AuthMode=OPEN or AuthMode=SHARED 
		TKIP		For AuthMode=WPAPSK or WPA2PSK                    
		AES			For AuthMode=WPAPSK or WPA2PSK                     
		
@> DefaultKeyID=value
	value
		1~4

@> Key1=value
    Key2=value
    Key3=value
    Key4=value
	value
		10 or 26 hexadecimal characters eg: 012345678
        5 or 13 ascii characters eg: passd
    (usage : "iwpriv" only)     

@> Key1Type=vaule
    Key2Type=value
    Key3Type=vaule
    Key4Type=vaule
    value
		0   hexadecimal type
		1   assic type
    (usage : reading profile only)

@> Key1Str=value
    Key2Str=value
    Key3Str=vaule
    Key4Str=vaule
    value
		10 or 26 characters (key type=0)
		5 or 13 characters  (key type=1)
    (usage : reading profile only)	

@> WPAPSK=value              	
	value
		8~63 ASCII  		or 
		64 HEX characters
																                    																		
@> WmmCapable=value
	value
		0: Disable WMM
		1: Enable WMM
        
@> PSMode=value
    value
    	CAM			    Constantly Awake Mode
		Max_PSP		    Max Power Savings
		Fast_PSP		Power Save Mode

@> FastRoaming=value
	value
		0				Disabled
		1				Enabled

@> RoamThreshold=value
	value
		Positive Interger(dBm)

@> HT_RDG=value
	value
		0				Disabled
		1				Enabled

@> HT_EXTCHA=value (Extended Channel Switch Announcement)
	value
		0				Below
		1 				Above

@> HT_OpMode=value
	value
		0				HT mixed format
		1				HT greenfield format

@> HT_MpduDensity=value
	value (based on 802.11n D2.0)
		0: no restriction
		1: 1/4 £gs
		2: 1/2 £gs
		3: 1 £gs
		4: 2 £gs
		5: 4 £gs
		6: 8 £gs
		7: 16 £gs

@> HT_BW=value
	value
		0				20MHz
		1				40MHz

@> HT_AutoBA=value
	value
		0				Disabled
		1				Enabled

@> HT_BADecline
	value
		0				Disabled
		1			    Enabled <Reject BA request from AP>

@> HT_AMSDU=value
	value
		0				Disabled
		1				Enabled

@> HT_BAWinSize=value
	value
		1 ~ 64

@> HT_GI=value
	value
		0				long GI
		1				short GI

@> HT_MCS=value
	value
		0 ~ 15
		33: auto

@> HT_MIMOPSMode=value
	value (based on 802.11n D2.0)
		0				Static SM Power Save Mode
		1				Dynamic SM Power Save Mode
		2				Reserved
		3				SM enabled
	(not fully support yet)

@> EthConvertMode=value
	value
		dongle
		clone
		hybrid

@> EthCloneMac=value
	value
		xx:xx:xx:xx:xx:xx

@> IEEE80211H=value
	value
		0				Disabled
		1				Enabled

@> TGnWifiTest=value
	value
		0				Disabled
		1				Enabled

@> WirelessEvent=value
	value
		0				Disabled
		1				Enabled <send custom wireless event>
	    
@> MeshId=value
	value
		Length 1~32 ascii characters

@> MeshAutoLink=value
	value
		0				Disabled
		1				Enabled

@> MeshAuthMode=value
	value
		OPEN	 	For open system	
		WPANONE		For WPA pre-shared key  (Adhoc)

@> MeshEncrypType=value
	value
		NONE		For MeshAuthMode=OPEN                    
		WEP			For MeshAuthMode=OPEN
		TKIP		For MeshAuthMode=WPANONE
		AES			For MeshAuthMode=WPANONE

@> MeshWPAKEY=value
	value
		8~63 ASCII  		or 
		64 HEX characters

@> MeshDefaultkey=value
	value
		1~4

@> MeshWEPKEY=value
	value
		10 or 26 characters
		5 or 13 characters

@> CarrierDetect=value
	value
		0				Disabled
		1				Enabled

MORE INFORMATION
=================================================================================
If you want for rt2870 driver to auto-load at boot time:
A) choose ra0 for first RT2870 WLAN card, ra1 for second RT2870 WLAN card, etc.
   
B) create(edit) 'ifcfg-ra0' file in /etc/sysconfig/network-scripts/,      
   edit( or add the line) in /etc/modules.conf:
       alias ra0 rt2870sta
   
C) edit(create) the file /etc/sysconfig/network-scripts/ifcfg-ra0  
   DEVICE='ra0'
   ONBOOT='yes'     


NOTE:
   if you use dhcp, add this line too .
    BOOTPROTO='dhcp'

*D) To ease the Default Gateway setting, 
    add the line
    GATEWAY=x.x.x.x   
    in /etc/sysconfig/network
   
=======================================================================
Dongle/Clone Features:
======================
A) Dongle mode: 
   	Provides a 1-to-N MAC address mapping mechanism such that more than one PC behind the STA 
   	can transparently connect to the AP.

B) Clone mode:
	Provides a 1-to-1 MAC address mapping mechanism. 
	STA can use own MAC as SA MAC or 
			use user desired MAC as SA MAC or
		    use source MAC of first packet coming from wired device as SA MAC.
	NOTE: In this mode, only the PC who own the specified MAC can connect to the AP.

 
C) Hybrid mode(Dongle+Clone):
	Provides a 1-to-N MAC address mapping mechanism such that more than one PC behind the STA 
   	can transparently connect to the AP.
	STA can use own MAC as SA MAC or 
			use user desired MAC as SA MAC or
		    use source MAC of first packet coming from wired device as SA MAC.

D) Please refer to "Config STA to link as dongle mode..." in iwpriv_usage.txt for releated commands.

Pas de mention de "blacklisting" !

xubu1957 · Le 15/08/2017, à 13:23

Cette réponse :

Le 29/10/2015, Coeur Noir a écrit :

Euh… désolé de jouer les Cassandre mais - perso - je ne suis plus parvenu à faire fonctionner des clés wifi usb et cartes wifi pci Ralink depuis Ubuntu 13.10 alors que celles-ci fonctionnaient bien sous les versions précédentes. Voir https://forum.ubuntu-fr.org/viewtopic.php?id=1471561
Finalement j'ai acheté une autre carte wifi, répertorié sur ce site http://www.linux-hardware-guide.com/fr/ … k/wireless pour une douzaine d'€ à peine.

> Noob ubuntu installation de clé wifi ralink rt2870

ireachthesun · Le 15/08/2017, à 13:38

Ouais je commencais à perdre espoir, c'est la meilleure solution je pense. Sans prise de tête.
Merci beaucoup de ton aide et de ta disponibilité, c'est très sympa !

Edit : Mais du coup ça m'intrigue. C'est une RALINK RT72870 (comme indiqué sur le readme du pilote officiel de TOTOLINK) ou une MT7601U ?

Dernière modification par ireachthesun (Le 15/08/2017, à 13:42)

xubu1957 · Le 15/08/2017, à 13:51

Dans wikipedia.org/wiki/Ralink

On May 5, 2011 Ralink was bought by the Taiwanese company MediaTek
Le 5 mai 2011, Ralink a été acheté par la société taiwanaise MediaTek

Recyclage des brevets.

xubu1957 · Le 15/08/2017, à 14:25

Tu pourrais aussi installer une version 16.04.1 LTS avec des noyaux 4.4 et utiliser le PPA thopiekar/+archive/ubuntu/mt7601/+packages qui est supporté en xenial.

FrancisFDZ · Le 16/08/2017, à 07:41

ireachthesun a écrit :

Blacklister ? Kézako ?
Voici le readme exhaustif :

Bien souvent, le driver par défaut d'une clé wifi fonctionne mal, il faut donc signaler au système de ne pas l'installer en le citant dans un fichier "blacklist" dans le répertoire "/etc/modprobe.d", et il est recommandé de valider le nouveau module du driver dans le fichier "/etc/modules". Ce mode opératoire n'est pas systématique, c'est pourquoi il est demandé (éventuellement) de le suivre dans un fichier texte, généralement "README" ou readme.txt" ou autre nom incitant à le lire : il ne faut pas sombrer dans le syndrome "RTFM" (Read This F... File" soit en français "Lis ce foutu fichier", syndrome qui consiste à se lancer dans les opérations sans lire le mode opératoire.

ireachthesun · Le 03/09/2017, à 19:54

Bonjour,
Merci de vos réponses !

Je me permets de upper le sujet. Suite à quelques manips naïves et quelques tentatives avec ndiswrapper, j'ai réussi à faire apparaître la liste des réseaux disponibles grâce à sudo iw dev wlan0 scan, toutefois l'icône wifi indique bien que le wifi est désactivé et qu'il n'y a pas de réseau détecté.
Je ne sais pas comment j'ai fait. Mais suite à un redémarrage, quand je retape la commande, ça m'affiche "Network is down".

Je pense que ce n'est pas mort encore. Vous pouvez m'indiquer des pistes ? Dites-moi s'il vous faut des informations sur la machine (ça doit être un peu le merdier à l'intérieur, ça va devenir ma machine test je pense).

ireachthesun · Le 03/09/2017, à 20:01

Ah c'est bon en fait, fallait faire un sudo ifconfig wlan0 up.
Vous me recommandez de suivre ce tuto pour me connecter à un réseau ? http://blog.guilou.fr/se-connecter-a-un … ous-linux/

xubu1957 · Le 03/09/2017, à 20:02

Bonjour,

Donne un wificheck
Nota : un fichier wificheck.log est créé dans votre répertoire personnel, collez l'intégralité de son contenu dans votre discussion.

cqfd93 a écrit :

Astuce pour copier / coller sans erreur :
triple clic gauche pour sélectionner et copier une ligne entière
clic molette pour coller dans le terminal

ireachthesun · Le 03/09/2017, à 22:04

[EDIT] Après avoir activé la carte wifi cela donne ça :

>>    cat /etc/lsb-release 

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=17.04
DISTRIB_CODENAME=zesty
DISTRIB_DESCRIPTION="Ubuntu 17.04"

>>    lsusb 

Bus 002 Device 003: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
Bus 002 Device 002: ID 148f:761a Ralink Technology, Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

>>    lspci -k -nn | grep -A 3 -i net 

04:00.0 Ethernet controller [0200]: Broadcom Limited NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
	Subsystem: COMPAL Electronics Inc NetLink BCM5906M Fast Ethernet PCI Express [14c0:0026]
	Kernel driver in use: tg3
	Kernel modules: tg3
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
	Subsystem: Intel Corporation WM3945ABG MOW2 [8086:1001]
	Kernel driver in use: iwl3945
	Kernel modules: iwl3945

>>    sudo lshw -C network 

  *-network
       description: Ethernet interface
       produit: NetLink BCM5906M Fast Ethernet PCI Express
       fabriquant: Broadcom Limited
       identifiant matériel: 0
       information bus: pci@0000:04:00.0
       nom logique: enp4s0
       version: 02
       numéro de série: 00:16:d4:de:d4:29
       taille: 100Mbit/s
       capacité: 100Mbit/s
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=sb v3.04 ip=192.168.0.8 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       ressources: irq:34 mémoire:f4000000-f400ffff
  *-network DÉSACTIVÉ
       description: Interface réseau sans fil
       produit: PRO/Wireless 3945ABG [Golan] Network Connection
       fabriquant: Intel Corporation
       identifiant matériel: 0
       information bus: pci@0000:0c:00.0
       nom logique: wlp12s0
       version: 02
       numéro de série: 00:19:d2:bb:4e:48
       bits: 32 bits
       horloge: 33MHz
       fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=iwl3945 driverversion=4.10.0-33-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11
       ressources: irq:33 mémoire:f8200000-f8200fff
  *-network
       description: Interface réseau sans fil
       identifiant matériel: 1
       information bus: usb@2:5
       nom logique: wlxf428530c38ab
       numéro de série: f4:28:53:0c:38:ab
       fonctionnalités: ethernet physical wireless
       configuration: broadcast=yes driver=mt7601u driverversion=4.10.0-33-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11

>>    lsmod 

Module                  Size  Used by
pci_stub               16384  1
vboxpci                24576  0
vboxnetadp             28672  0
vboxnetflt             28672  0
vboxdrv               331776  3 vboxnetadp,vboxnetflt,vboxpci
crypto_simd            16384  0
cryptd                 24576  1 crypto_simd
aes_i586               20480  633
dm_crypt               24576  1
coretemp               16384  0
kvm_intel             200704  0
kvm                   520192  1 kvm_intel
irqbypass              16384  1 kvm
input_leds             16384  0
joydev                 20480  0
snd_hda_codec_si3054    16384  1
serio_raw              16384  0
snd_hda_codec_realtek    77824  1
snd_hda_codec_generic    69632  1 snd_hda_codec_realtek
i2c_i801               28672  0
arc4                   16384  4
iwl3945                65536  0
snd_hda_intel          32768  3
r592                   20480  0
iwlegacy               86016  1 iwl3945
mt7601u                86016  0
memstick               16384  1 r592
mac80211              700416  3 mt7601u,iwlegacy,iwl3945
snd_hda_codec         114688  4 snd_hda_intel,snd_hda_codec_generic,snd_hda_codec_si3054,snd_hda_codec_realtek
snd_hda_core           69632  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_generic,snd_hda_codec_si3054,snd_hda_codec_realtek
lpc_ich                20480  0
snd_hwdep              16384  1 snd_hda_codec
snd_pcm                94208  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_si3054
cfg80211              532480  4 mac80211,mt7601u,iwlegacy,iwl3945
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            28672  1 snd_seq_midi
ir_lirc_codec          16384  0
ir_rc6_decoder         16384  0
lirc_dev               20480  1 ir_lirc_codec
snd_seq                57344  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              28672  2 snd_seq,snd_pcm
snd                    65536  17 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_si3054,snd_hda_codec_realtek,snd_pcm
rc_rc6_mce             16384  0
ene_ir                 20480  0
soundcore              16384  1 snd
shpchp                 32768  0
rc_core                28672  6 ir_rc6_decoder,rc_rc6_mce,ir_lirc_codec,lirc_dev,ene_ir
eeprom                 16384  0
mac_hid                16384  0
ndiswrapper           200704  0
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                45056  3 lp,parport_pc,ppdev
ip_tables              20480  0
x_tables               24576  1 ip_tables
autofs4                40960  2
i915                 1187840  3
ahci                   36864  2
psmouse               122880  0
i2c_algo_bit           16384  1 i915
tg3                   159744  0
firewire_ohci          36864  0
drm_kms_helper        139264  1 i915
libahci                32768  1 ahci
ptp                    20480  1 tg3
firewire_core          61440  1 firewire_ohci
pps_core               20480  1 ptp
sdhci_pci              28672  0
sdhci                  45056  1 sdhci_pci
pata_acpi              16384  0
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
crc_itu_t              16384  1 firewire_core
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
drm                   303104  5 i915,drm_kms_helper
wmi                    16384  0
fjes                   61440  0
video                  40960  1 i915

>>    iwconfig 

wlp12s0   IEEE 802.11  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          
wlxf428530c38ab  IEEE 802.11  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          

>>    ifconfig -a 

enp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.8  netmask 255.255.255.0  broadcast 192.168.0.255
        inet6 fe80::6802:dc28:324b:13f8  prefixlen 64  scopeid 0x20<link>
        ether 00:16:d4:de:d4:29  txqueuelen 1000  (Ethernet)
        RX packets 5171  bytes 4340192 (4.3 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 4192  bytes 961374 (961.3 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 17  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Boucle locale)
        RX packets 338  bytes 24790 (24.7 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 338  bytes 24790 (24.7 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlp12s0: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:19:d2:bb:4e:48  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlxf428530c38ab: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether f4:28:53:0c:38:ab  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


>>    sudo iwlist scan 

wlxf428530c38ab  Scan completed :
          Cell 01 - Address: F4:CA:E5:FF:56:C9
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=59/70  Signal level=-51 dBm  
                    Encryption key:off
                    ESSID:"FreeWifi"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
                              6 Mb/s; 9 Mb/s; 12 Mb/s
                    Bit Rates:18 Mb/s; 24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000002797721e56
                    Extra: Last beacon: 16ms ago
                    IE: Unknown: 00084672656557696669
                    IE: Unknown: 010882848B962C0C1218
                    IE: Unknown: 03010B
                    IE: Unknown: 2A0104
                    IE: Unknown: 3205243048606C
                    IE: Unknown: 2D1A6C0003FFFFFF0001000000000000000100000000000000000000
                    IE: Unknown: 3D160B000400000000000000000000000000000000000000
                    IE: Unknown: 7F080000000000000040
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
          Cell 02 - Address: F4:CA:E5:FF:56:CA
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=59/70  Signal level=-51 dBm  
                    Encryption key:on
                    ESSID:"FreeWifi_secure"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
                              6 Mb/s; 9 Mb/s; 12 Mb/s
                    Bit Rates:18 Mb/s; 24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000279771b0fe
                    Extra: Last beacon: 16ms ago
                    IE: Unknown: 000F46726565576966695F736563757265
                    IE: Unknown: 010882848B962C0C1218
                    IE: Unknown: 03010B
                    IE: Unknown: 2A0104
                    IE: Unknown: 3205243048606C
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : 802.1x
                    IE: Unknown: 2D1A6C0003FFFFFF0001000000000000000100000000000000000000
                    IE: Unknown: 3D160B000400000000000000000000000000000000000000
                    IE: Unknown: 7F080000000000000040
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
          Cell 03 - Address: F4:CA:E5:FF:56:C8
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=61/70  Signal level=-49 dBm  
                    Encryption key:on
                    ESSID:"nicole"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
                              6 Mb/s; 9 Mb/s; 12 Mb/s
                    Bit Rates:18 Mb/s; 24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000002797728d26
                    Extra: Last beacon: 16ms ago
                    IE: Unknown: 00066E69636F6C65
                    IE: Unknown: 010882848B962C0C1218
                    IE: Unknown: 03010B
                    IE: Unknown: 2A0104
                    IE: Unknown: 3205243048606C
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 2D1A6C0003FFFFFF0001000000000000000100000000000000000000
                    IE: Unknown: 3D160B000400000000000000000000000000000000000000
                    IE: Unknown: 7F080000000000000040
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00


>>    uname -r -m 

4.10.0-33-generic i686

>>    cat /etc/network/interfaces 

# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback

>>    nm-tool 


>>    nmcli dev wifi 

*  SSID  MODE  CHAN  DÉBIT  SIGNAL  BARS  SÉCURITÉ 

*  SSID  MODE  CHAN  DÉBIT  SIGNAL  BARS  SÉCURITÉ 

>>    nmcli connection show 

NOM       UUID                                  TYPE            PÉRIPHÉRIQUE 
Ethernet  b07612ef-2dba-38d1-a61a-c421bc9e06af  802-3-ethernet  enp4s0       

>>    sudo rfkill list 

0: phy1: Wireless LAN
	Soft blocked: no
	Hard blocked: yes
1: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no

[EDIT2] J'essaye de me connecter à "nicole", c'est une freebox, je ne sais pas si c'est une wpa ou une wep, ni si c'est la clé d'origine. C'est une clé à 10 caractères.

Dernière modification par ireachthesun (Le 03/09/2017, à 22:16)

xubu1957 · Le 03/09/2017, à 22:20

Pour la commande, tu as bien cherché, dans une discussion ancienne, un de nos spécialiste des réseaux indiquait :

Le 03/10/2010, toutafai a écrit :

Bonjour,
La vitesse du wifi doit être gérer de façon automatique, d'ou les variation que tu peux constater au retour d'un iwconfig et donc le module (ou driver si tu préfère) qui gère ton wifi s'adapte automatiquement au variation de la qualité de réception de ton wifi.
as -tu d'autre pc de connecté en wifi sur ta box ?
Tu peux aussi si la configuration de ta box le permet, forcer le bitrate à 54 Mbs (ou norme G) dans l'interface de gestion de ta box.
Enfin, mieux vaut éviter de se servir de ifup / ifdown car celui-ci s'appuie sur les informations contenu dans le fichier interfaces....et comme celui-ci ne contient (normalement) pas d'info concernant l'interface wlan0, une erreur s'affiche.
Mieux vaut utiliser la commande
sudo ifconfig wlan0 down
sudo ifconfig wlan0 up

ireachthesun · Le 03/09/2017, à 22:27

Merci !
Du coup, je sais que la carte wifi est détectée et fonctionnelle sur ma version de linux, mais toujours est-il que sur l'interface réseau ça m'affiche "Wifi désactivé", il y a une astuce pour que l'interface réseau détecte les réseaux détectés par ma clé wifi pour que je puisse me connecter directement ?
Pas de wifi

Edit : ça doit être un truc avec le network-manager je pense.

Dernière modification par ireachthesun (Le 03/09/2017, à 22:28)

xubu1957 · Le 03/09/2017, à 22:27

Un autre conseil :

Le 12/02/2017, toutafai a écrit :

Bonjour a tous,
Je confirme aussi qu'avant de mettre les mains dans le cambouis, une chose simple a faire est de changer ce "double-chiffrement" dans l'interface d'admin de la box (généralement accessible à l'ip suivante 192.168.1.1)
Autre chose qui est très souvent pas clair dans la tête des non-initiés : Il est possible d’être bien connecté à sa box, mais qu'il soit impossible d'aller sur internet (comme si on n'était pas connecté du tout). La raison en est simple (c'est aussi un grand classique avec les livebox) : L'ASSOCIATION qui n'as jamais était faite avec le pc !
Si c'est le cas c'est a faire et a réussir au moins 1 fois ! On peut aussi contourner le problème de l'association, en passant par le filtrage d'adresse MAC (soit on le désactive, soit on entre l'adresse mac de son pc, ne pas oublier d'enregistrer les modifications)
Enfin, dernière chose, mieux vaut être connecté à sa box avec un câble pour modifier le paramètre wifi d'une box. Si vous le faites en wifi, vous risquez d’être déconnecté quand vous allez changer certains paramètres wifi de la box, il faudra vous y reconnecter pour continuer vos modifications....

Tu n'as pas les identifiants de ta Freebox ?

> free.fr/assistance

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 15/08/2017, à 05:26

[Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#2 Le 15/08/2017, à 05:47

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#3 Le 15/08/2017, à 06:09

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#4 Le 15/08/2017, à 06:10

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#5 Le 15/08/2017, à 06:20

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#6 Le 15/08/2017, à 06:27

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#7 Le 15/08/2017, à 11:09

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#8 Le 15/08/2017, à 11:37

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#9 Le 15/08/2017, à 12:05

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#10 Le 15/08/2017, à 12:08

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#11 Le 15/08/2017, à 13:05

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#12 Le 15/08/2017, à 13:13

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#13 Le 15/08/2017, à 13:18

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#14 Le 15/08/2017, à 13:23

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#15 Le 15/08/2017, à 13:38

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#16 Le 15/08/2017, à 13:51

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#17 Le 15/08/2017, à 14:25

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#18 Le 16/08/2017, à 07:41

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#19 Le 03/09/2017, à 19:54

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#20 Le 03/09/2017, à 20:01

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#21 Le 03/09/2017, à 20:02

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#22 Le 03/09/2017, à 22:04

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#23 Le 03/09/2017, à 22:20

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#24 Le 03/09/2017, à 22:27

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

#25 Le 03/09/2017, à 22:27

Re : [Résolu] Souci de compilation de pilote dongle wifi : MEDIATEK MT7601u

Pied de page des forums