#101 Le 19/11/2017, à 21:44
- Satire
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Voici le retour de la première commande :
sat@sat-XPS-15-9560:~$ sudo apt update
[sudo] Mot de passe de sat :
Réception de:1 http://security.ubuntu.com/ubuntu artful-security InRelease [78,6 kB]
Atteint:2 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu artful InRelease
Atteint:3 http://fr.archive.ubuntu.com/ubuntu artful InRelease
Atteint:4 http://fr.archive.ubuntu.com/ubuntu artful-updates InRelease
Atteint:5 http://fr.archive.ubuntu.com/ubuntu artful-backports InRelease
78,6 ko réceptionnés en 0s (135 ko/s)
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Tous les paquets sont à jour.
sat@sat-XPS-15-9560:~$
Et de la seconde :
sat@sat-XPS-15-9560:~$ sudo apt upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
sat@sat-XPS-15-9560:~$
Voici le nouveau boot info : http://paste.ubuntu.com/25999915/
Hors ligne
#102 Le 19/11/2017, à 22:00
- Babdu89
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
@ Satire.
En redémarrant avec F12, dans UEFI BOOT:
Le ssd CX2-8B-256-Q11 NVMe LITEON 256GB, partition1 est toujours là?
Que donne un;
sudo fdisk -l
Avec un L minuscule.
ARRGGGG, comme un fait ex-prêt, nous n'avons plus accès aux boot info des pages précédentes...
@+. Babdu89 .
Dernière modification par Babdu89 (Le 19/11/2017, à 22:06)
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#103 Le 19/11/2017, à 22:03
- Satire
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Oui, Babdu89, le SSD Windows 10 est bien branché, j'ai d'ailleurs à plusieurs reprise redémarré dessus (chose à noter, c'est qu'il y une vérification préalable du disque/OS Windows qui n'existait pas auparavant et qui s'effectue lors du démarrage sur Windows 10).
Non, ??, je n'avais pas alloué à "Nota Sda1" "512 Mo", mais 200Mo, comme indiqué par Babdu89 dans le post #88.
Hors ligne
#104 Le 19/11/2017, à 22:07
- Satire
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Alors, Babdu89, oui, le ssd CX2-8B-256-Q11 NVMe LITEON 256GB, partition1 est toujours présent, c'est d'ailleurs comme cela que je peux démarrer sur le SSD Windows 10.
Voici le retour de la commande suggérée :
sat@sat-XPS-15-9560:~$ sudo fdisk -L
[sudo] Mot de passe de sat :
Usage:
fdisk [options] <disk> change partition table
fdisk [options] -l [<disk>] list partition table(s)
Display or manipulate a disk partition table.
Options :
-b, --sector-size <size> physical and logical sector size
-B, --protect-boot don't erase bootbits when creating a new label
-c, --compatibility[=<mode>] mode is 'dos' or 'nondos' (default)
-L, --color[=<when>] colorize output (auto, always or never)
colors are enabled by default
-l, --list display partitions and exit
-o, --output <list> output columns
-t, --type <type> recognize specified partition table type only
-u, --units[=<unit>] display units: 'cylinders' or 'sectors' (default)
-s, --getsz display device size in 512-byte sectors [DEPRECATED]
--bytes print SIZE in bytes rather than in human readable format
-w, --wipe <mode> wipe signatures (auto, always or never)
-W, --wipe-partitions <mode> wipe signatures from new partitions (auto, always or never)
-C, --cylinders <number> specify the number of cylinders
-H, --heads <number> specify the number of heads
-S, --sectors <number> specify the number of sectors per track
-h, --help display this help and exit
-V, --version output version information and exit
Available columns (for -o):
gpt: Device Start End Sectors Size Type Type-UUID Attrs Name UUID
dos: Device Start End Sectors Cylinders Size Type Id Attrs Boot End-C/H/S
Start-C/H/S
bsd: Slice Start End Sectors Cylinders Size Type Bsize Cpg Fsize
sgi: Device Start End Sectors Cylinders Size Type Id Attrs
sun: Device Start End Sectors Cylinders Size Type Id Flags
For more details see fdisk(8).
sat@sat-XPS-15-9560:~$
Question subsidiaire, est-ce que la nouvelle installation d'Ubuntu 17.10 s'est sur du GPT?
Dernière modification par Satire (Le 19/11/2017, à 22:07)
Hors ligne
#105 Le 19/11/2017, à 22:09
- Babdu89
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Non, ??, je n'avais pas alloué à "Nota Sda1" "512 Mo", mais 200Mo, comme indiqué par Babdu89 dans le post #88.
Ok!. Donc l’installateur à refait son partitionnement.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#106 Le 19/11/2017, à 22:10
- Babdu89
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Réponse au post#105
fdisk -l avec un L minuscule, pas majuscule...
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#107 Le 19/11/2017, à 22:14
- Satire
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Oops... désolé Babdu89, lu le post trop vite...
Voici le retour de la commande avec un "l" minuscule :
sat@sat-XPS-15-9560:~$ sudo fdisk -l
Disque /dev/sda : 465,8 GiB, 500107862016 octets, 976773168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 77BEFAAD-7741-4013-B3A5-AF6051C3D262
Périphérique Start Fin Secteurs Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 976771071 975720448 465,3G Linux filesystem
sat@sat-XPS-15-9560:~$
Hors ligne
#108 Le 19/11/2017, à 22:18
- Babdu89
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Non, toujours pas de ssd Windows montré, avec Ubuntu démarré en UEFI....
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#109 Le 19/11/2017, à 22:25
- Babdu89
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Post#104 on lit;
(chose à noter, c'est qu'il y une vérification préalable du disque/OS Windows qui n'existait pas auparavant et qui s'effectue lors du démarrage sur Windows 10).
Démarre ton Windows, quitte le en utilisant l'Option "Redémarrer" (pas éteindre) puis redémarre sur Ubuntu.
Puis redémarre Windows et dis nous si il fait encore une vérification système.
Tu quittes Windows avec "Redémarrer"...
Nota, Pour cette histoire d'être obligé de quitter Ubuntu 17.10 avec le bouton marche/arrêt...
C'est aussi pour çà que je préconisais d'installer une version 16.04, pour savoir si il y avait le même souci.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#110 Le 19/11/2017, à 22:28
- ??
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Il me semble avoir lu qu'en théorie la version 17.10 sait accéder aux partitions NTFS même lorsque windows est en hibernation.
Dernière modification par ?? (Le 19/11/2017, à 22:29)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#111 Le 19/11/2017, à 22:38
- Satire
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Alors, Babdu89, c'est une manipulation que j'avais déjà faite auparavant, et que je viens juste de refaire, et la vérification du disque/OS persiste quand même.
Hors ligne
#112 Le 19/11/2017, à 22:56
- ??
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Nota, Pour cette histoire d'être obligé de quitter Ubuntu 17.10 avec le bouton marche/arrêt...
C'est aussi pour çà que je préconisais d'installer une version 16.04, pour savoir si il y avait le même souci.
@+. Babdu89 .
Le problème semble exister en 16.04.3 https://bugs.launchpad.net/ubuntu/artfu … ug/1713751
Pour satire, au prochain boot, tu donneras le contenu de la trace de boot.
cela sera volumineux. je ne sais pas si on y verra quelque chose.
La commande est
dmesg
Cependant, dans le bios, peux-tu essayer de regarder tout ce qui a trait au mode d'acces des ssd. raids? ahci? ou autre ?
Dernière modification par ?? (Le 19/11/2017, à 22:58)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#113 Le 19/11/2017, à 23:00
- Satire
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Peux-tu me dire, ??, comment regarder dans le bios ce qui a trait au mode d'accès des ssd, raids, ahci ou autre ?
Voici le retour de la commande indiquée :
sat@sat-XPS-15-9560:~$ dmesg
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4e1 with crng_init=0
[ 0.000000] Linux version 4.13.0-16-generic (buildd@lcy01-02) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu2)) #19-Ubuntu SMP Wed Oct 11 18:35:14 UTC 2017 (Ubuntu 4.13.0-16.19-generic 4.13.4)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic.efi.signed root=UUID=f0641efe-a392-4030-8271-de6b3db19912 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000667effff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000667f0000-0x00000000667f0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000667f1000-0x00000000667f1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000667f2000-0x000000007845bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007845c000-0x0000000078818fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078819000-0x000000007885efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007885f000-0x0000000078f3ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000078f40000-0x0000000079520fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079521000-0x00000000795fefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000795ff000-0x00000000795fffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079600000-0x000000007f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027e7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x78827000 ACPI 2.0=0x78827000 SMBIOS=0x79368000 SMBIOS 3.0=0x79367000 ESRT=0x792d7018 MPS=0xfcbd0 MEMATTR=0x75d3d018
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 15 9560/05FFDN, BIOS 1.5.0 08/30/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x27e800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007B000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x79600 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcea0-0x000fceaf] mapped at [ffff8b50400fcea0]
[ 0.000000] esrt: Reserving ESRT space from 0x00000000792d7018 to 0x00000000792d7050.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8b5040096000] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x158523000, 0x158523fff] PGTABLE
[ 0.000000] BRK [0x158524000, 0x158524fff] PGTABLE
[ 0.000000] BRK [0x158525000, 0x158525fff] PGTABLE
[ 0.000000] BRK [0x158526000, 0x158526fff] PGTABLE
[ 0.000000] BRK [0x158527000, 0x158527fff] PGTABLE
[ 0.000000] BRK [0x158528000, 0x158528fff] PGTABLE
[ 0.000000] BRK [0x158529000, 0x158529fff] PGTABLE
[ 0.000000] BRK [0x15852a000, 0x15852afff] PGTABLE
[ 0.000000] BRK [0x15852b000, 0x15852bfff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x31ef5000-0x34f71fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000078827000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000788270D8 000134 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007884C998 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000788272A0 0256F1 (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.000000] ACPI: FACS 0x0000000078F3D180 000040
[ 0.000000] ACPI: UEFI 0x000000007884D000 00063A (v01 INTEL RstSataE 00000000 ?? 00000000)
[ 0.000000] ACPI: APIC 0x000000007884D640 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007884D700 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007884D748 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007884D7F8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007884D838 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x000000007884D870 0004B8 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: BOOT 0x000000007884DD28 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007884DD50 0012FE (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000007884F050 002959 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ 0.000000] ACPI: HPET 0x00000000788519B0 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000788519E8 000B8C (v02 INTEL xh_rvp11 00000000 INTL 20160422)
[ 0.000000] ACPI: UEFI 0x0000000078852578 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000788525C0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x00000000788534A0 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: WSMT 0x0000000078853538 000028 (v01 DELL CBX3 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x0000000078853560 00011E (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x0000000078853680 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x0000000078853920 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x0000000078856928 00050D (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x0000000078856E38 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x0000000078856E70 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x0000000078856EC8 005322 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: MSDM 0x000000007885C1F0 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x000000007885C248 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.000000] ACPI: SSDT 0x000000007885C3C0 0000AE (v02 SgRef SgPeg 00001000 INTL 20160422)
[ 0.000000] ACPI: NHLT 0x000000007885C470 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: UEFI 0x000000007885C4A0 00005C (v01 INTEL RstSataV 00000000 ?? 00000000)
[ 0.000000] ACPI: TPM2 0x000000007885C500 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.000000] ACPI: SSDT 0x000000007885C538 001C70 (v01 OptRef OptTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: ASF! 0x000000007885E1A8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: DMAR 0x000000007885E248 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 0x000000007885E338 000038 (v00 \xf3\xee 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027e7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x27e7d5000-0x27e7fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027e7fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000667effff]
[ 0.000000] node 0: [mem 0x00000000667f2000-0x000000007845bfff]
[ 0.000000] node 0: [mem 0x00000000795ff000-0x00000000795fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027e7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027e7fffff]
[ 0.000000] On node 0 totalpages: 2059256
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7634 pages used for memmap
[ 0.000000] DMA32 zone: 488539 pages, LIFO batch:31
[ 0.000000] Normal zone: 24480 pages used for memmap
[ 0.000000] Normal zone: 1566720 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000007b800000-0x000000007f7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x667f0000-0x667f0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x667f1000-0x667f1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7845c000-0x78818fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78819000-0x7885efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7885f000-0x78f3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78f40000-0x79520fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79521000-0x795fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79600000-0x7f7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f800000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x7f800000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 39 pages/cpu @ffff8b52be400000 s119704 r8192 d31848 u262144
[ 0.000000] pcpu-alloc: s119704 r8192 d31848 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2027052
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic.efi.signed root=UUID=f0641efe-a392-4030-8271-de6b3db19912 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7924880K/8237024K available (9281K kernel code, 2477K rwdata, 3992K rodata, 2324K init, 2384K bss, 312144K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 37719 entries in 148 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] tsc: Detected 2800.000 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5616.00 BogoMIPS (lpj=11232000)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.038709] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170531/dswload-210)
[ 0.038715] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170531/psobject-252)
[ 0.038752] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp11) while loading table (20170531/tbxfload-228)
[ 0.041593] ACPI Error: 1 table load failures, 12 successful (20170531/tbxfload-246)
[ 0.042436] Security Framework initialized
[ 0.042437] Yama: becoming mindful.
[ 0.042453] AppArmor: AppArmor initialized
[ 0.043413] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.043887] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.043906] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.043921] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.044134] CPU: Physical Processor ID: 0
[ 0.044134] CPU: Processor Core ID: 0
[ 0.044138] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.044138] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.044143] mce: CPU supports 10 MCE banks
[ 0.044151] CPU0: Thermal monitoring enabled (TM1)
[ 0.044169] process: using mwait in idle threads
[ 0.044171] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.044172] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.044574] Freeing SMP alternatives memory: 36K
[ 0.048956] smpboot: Max logical packages: 2
[ 0.048961] DMAR: Host address width 39
[ 0.048962] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.048967] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.048968] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.048973] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.048973] DMAR: RMRR base: 0x00000078534000 end: 0x00000078553fff
[ 0.048974] DMAR: RMRR base: 0x0000007b000000 end: 0x0000007f7fffff
[ 0.048975] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.048976] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.048977] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.048978] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.048978] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.050359] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.050360] x2apic enabled
[ 0.050370] Switched APIC routing to cluster x2apic.
[ 0.055171] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.094884] TSC deadline timer enabled
[ 0.094889] smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[ 0.094938] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.094969] ... version: 4
[ 0.094969] ... bit width: 48
[ 0.094969] ... generic registers: 4
[ 0.094970] ... value mask: 0000ffffffffffff
[ 0.094971] ... max period: 00007fffffffffff
[ 0.094971] ... fixed-purpose events: 3
[ 0.094971] ... event mask: 000000070000000f
[ 0.095000] Hierarchical SRCU implementation.
[ 0.095688] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.095698] smp: Bringing up secondary CPUs ...
[ 0.095747] x86: Booting SMP configuration:
[ 0.095748] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.096152] smp: Brought up 1 node, 8 CPUs
[ 0.096152] smpboot: Total of 8 processors activated (44928.00 BogoMIPS)
[ 0.100280] devtmpfs: initialized
[ 0.100280] x86/mm: Memory block size: 128MB
[ 0.100515] evm: security.selinux
[ 0.100516] evm: security.SMACK64
[ 0.100516] evm: security.SMACK64EXEC
[ 0.100516] evm: security.SMACK64TRANSMUTE
[ 0.100517] evm: security.SMACK64MMAP
[ 0.100517] evm: security.ima
[ 0.100518] evm: security.capability
[ 0.100528] PM: Registering ACPI NVS region [mem 0x667f0000-0x667f0fff] (4096 bytes)
[ 0.100528] PM: Registering ACPI NVS region [mem 0x7885f000-0x78f3ffff] (7213056 bytes)
[ 0.100528] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.100528] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.100528] pinctrl core: initialized pinctrl subsystem
[ 0.100528] RTC time: 22:03:20, date: 11/19/17
[ 0.100528] NET: Registered protocol family 16
[ 0.100535] cpuidle: using governor ladder
[ 0.100535] cpuidle: using governor menu
[ 0.100535] PCCT header not found.
[ 0.100535] Simple Boot Flag at 0x47 set to 0x80
[ 0.100535] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.100535] ACPI: bus type PCI registered
[ 0.100535] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.100535] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.100535] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.100535] PCI: Using configuration type 1 for base access
[ 0.100912] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.100912] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.100913] ACPI: Added _OSI(Module Device)
[ 0.100913] ACPI: Added _OSI(Processor Device)
[ 0.100913] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.100913] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.104148] ACPI: Executed 38 blocks of module-level executable AML code
[ 0.116602] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.123349] ACPI: Dynamic OEM Table Load:
[ 0.123349] ACPI: SSDT 0xFFFF8B52B408D800 000651 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.123349] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.124012] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.124857] ACPI: Dynamic OEM Table Load:
[ 0.124863] ACPI: SSDT 0xFFFF8B52B43DA000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.124990] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.125069] ACPI: Dynamic OEM Table Load:
[ 0.125069] ACPI: SSDT 0xFFFF8B52B415B000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.125069] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.125069] ACPI: Dynamic OEM Table Load:
[ 0.125069] ACPI: SSDT 0xFFFF8B52B3C88200 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.125069] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.128649] ACPI: EC: EC started
[ 0.128650] ACPI: EC: interrupt blocked
[ 0.132076] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.132077] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.132079] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[ 0.132079] ACPI: Interpreter enabled
[ 0.132121] ACPI: (supports S0 S3 S4 S5)
[ 0.132121] ACPI: Using IOAPIC for interrupt routing
[ 0.132156] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.132734] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.134322] ACPI: Power Resource [PG00] (on)
[ 0.156668] ACPI: Power Resource [PG01] (on)
[ 0.156963] ACPI: Power Resource [PG02] (on)
[ 0.158678] ACPI: Power Resource [WRST] (on)
[ 0.158978] ACPI: Power Resource [WRST] (on)
[ 0.159274] ACPI: Power Resource [WRST] (on)
[ 0.159572] ACPI: Power Resource [WRST] (on)
[ 0.159871] ACPI: Power Resource [WRST] (on)
[ 0.160225] ACPI: Power Resource [WRST] (on)
[ 0.160524] ACPI: Power Resource [WRST] (on)
[ 0.160822] ACPI: Power Resource [WRST] (on)
[ 0.161124] ACPI: Power Resource [WRST] (on)
[ 0.161422] ACPI: Power Resource [WRST] (on)
[ 0.161716] ACPI: Power Resource [WRST] (on)
[ 0.162011] ACPI: Power Resource [WRST] (on)
[ 0.162304] ACPI: Power Resource [WRST] (on)
[ 0.162599] ACPI: Power Resource [WRST] (on)
[ 0.162896] ACPI: Power Resource [WRST] (on)
[ 0.163193] ACPI: Power Resource [WRST] (on)
[ 0.163486] ACPI: Power Resource [WRST] (on)
[ 0.164626] ACPI: Power Resource [WRST] (on)
[ 0.164930] ACPI: Power Resource [WRST] (on)
[ 0.165225] ACPI: Power Resource [WRST] (on)
[ 0.181839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.181843] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.182189] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.182518] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.182519] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.183140] PCI host bridge to bus 0000:00
[ 0.183142] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.183143] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.183144] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.183145] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xefffffff window]
[ 0.183146] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.183147] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.183153] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
[ 0.183252] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.183287] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.183434] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
[ 0.183443] pci 0000:00:02.0: reg 0x10: [mem 0xeb000000-0xebffffff 64bit]
[ 0.183447] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.183451] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.183561] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.183570] pci 0000:00:04.0: reg 0x10: [mem 0xed1a8000-0xed1affff 64bit]
[ 0.183752] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.183784] pci 0000:00:14.0: reg 0x10: [mem 0xed190000-0xed19ffff 64bit]
[ 0.183882] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.184062] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.184094] pci 0000:00:14.2: reg 0x10: [mem 0xed1bd000-0xed1bdfff 64bit]
[ 0.184342] pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
[ 0.184544] pci 0000:00:15.0: reg 0x10: [mem 0xed1bc000-0xed1bcfff 64bit]
[ 0.185377] pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
[ 0.185579] pci 0000:00:15.1: reg 0x10: [mem 0xed1bb000-0xed1bbfff 64bit]
[ 0.186237] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.186266] pci 0000:00:16.0: reg 0x10: [mem 0xed1ba000-0xed1bafff 64bit]
[ 0.186330] pci 0000:00:16.0: PME# supported from D3hot
[ 0.186835] pci 0000:00:17.0: [8086:282a] type 00 class 0x010400
[ 0.186861] pci 0000:00:17.0: reg 0x10: [mem 0xed1a0000-0xed1a7fff]
[ 0.186872] pci 0000:00:17.0: reg 0x14: [mem 0xed1b9000-0xed1b90ff]
[ 0.186884] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.186891] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.186900] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.186911] pci 0000:00:17.0: reg 0x24: [mem 0xed100000-0xed17ffff]
[ 0.186968] pci 0000:00:17.0: PME# supported from D3hot
[ 0.187088] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[ 0.187189] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.187318] pci 0000:00:1c.1: [8086:a111] type 01 class 0x060400
[ 0.187419] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.187572] pci 0000:00:1d.0: [8086:a11c] type 01 class 0x060400
[ 0.187648] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.187790] pci 0000:00:1d.6: [8086:a11e] type 01 class 0x060400
[ 0.187881] pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold
[ 0.188012] pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
[ 0.188220] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.188235] pci 0000:00:1f.2: reg 0x10: [mem 0xed1b4000-0xed1b7fff]
[ 0.188390] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040380
[ 0.188419] pci 0000:00:1f.3: reg 0x10: [mem 0xed1b0000-0xed1b3fff 64bit]
[ 0.188448] pci 0000:00:1f.3: reg 0x20: [mem 0xed180000-0xed18ffff 64bit]
[ 0.188499] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.188673] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.188734] pci 0000:00:1f.4: reg 0x10: [mem 0xed1b8000-0xed1b80ff 64bit]
[ 0.188804] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.189008] pci 0000:01:00.0: [10de:1c8d] type 00 class 0x030200
[ 0.189021] pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xecffffff]
[ 0.189028] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.189034] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.189039] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.189044] pci 0000:01:00.0: reg 0x30: [mem 0xed000000-0xed07ffff pref]
[ 0.200034] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.200036] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.200038] pci 0000:00:01.0: bridge window [mem 0xec000000-0xed0fffff]
[ 0.200040] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.200234] pci 0000:02:00.0: [168c:003e] type 00 class 0x028000
[ 0.200417] pci 0000:02:00.0: reg 0x10: [mem 0xed200000-0xed3fffff 64bit]
[ 0.201123] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.212194] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.212201] pci 0000:00:1c.0: bridge window [mem 0xed200000-0xed3fffff]
[ 0.212314] acpiphp: Slot [1] registered
[ 0.212332] pci 0000:03:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.212370] pci 0000:03:00.0: reg 0x14: [mem 0xed400000-0xed400fff]
[ 0.212488] pci 0000:03:00.0: supports D1 D2
[ 0.212489] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.224031] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.224035] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.224039] pci 0000:00:1c.1: bridge window [mem 0xed400000-0xeddfffff]
[ 0.224046] pci 0000:00:1c.1: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[ 0.224150] acpiphp: Slot [1-1] registered
[ 0.224155] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 0.224272] pci 0000:00:1d.6: PCI bridge to [bus 05-3d]
[ 0.224279] pci 0000:00:1d.6: bridge window [mem 0xd4000000-0xea0fffff]
[ 0.224286] pci 0000:00:1d.6: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.226527] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.226572] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.226614] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.226655] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.226698] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.226740] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.226782] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.226823] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.228759] ACPI: EC: interrupt unblocked
[ 0.228776] ACPI: EC: event unblocked
[ 0.228803] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.228804] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[ 0.229096] SCSI subsystem initialized
[ 0.229106] libata version 3.00 loaded.
[ 0.229106] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.229106] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.229106] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.229106] vgaarb: loaded
[ 0.229106] ACPI: bus type USB registered
[ 0.229106] usbcore: registered new interface driver usbfs
[ 0.229106] usbcore: registered new interface driver hub
[ 0.229106] usbcore: registered new device driver usb
[ 0.229106] EDAC MC: Ver: 3.0.0
[ 0.229106] Registered efivars operations
[ 0.240727] PCI: Using ACPI for IRQ routing
[ 0.252119] PCI: pci_cache_line_size set to 64 bytes
[ 0.252318] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.252319] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.252319] e820: reserve RAM buffer [mem 0x667f0000-0x67ffffff]
[ 0.252320] e820: reserve RAM buffer [mem 0x7845c000-0x7bffffff]
[ 0.252321] e820: reserve RAM buffer [mem 0x79600000-0x7bffffff]
[ 0.252321] e820: reserve RAM buffer [mem 0x27e800000-0x27fffffff]
[ 0.252388] NetLabel: Initializing
[ 0.252389] NetLabel: domain hash size = 128
[ 0.252389] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.252403] NetLabel: unlabeled traffic allowed by default
[ 0.252414] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.252414] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.254145] clocksource: Switched to clocksource hpet
[ 0.259605] VFS: Disk quotas dquot_6.6.0
[ 0.259618] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.259685] AppArmor: AppArmor Filesystem Enabled
[ 0.259712] pnp: PnP ACPI init
[ 0.259918] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.259919] system 00:00: [io 0xffff] has been reserved
[ 0.259920] system 00:00: [io 0xffff] has been reserved
[ 0.259921] system 00:00: [io 0xffff] has been reserved
[ 0.259922] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.259923] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.259925] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.260034] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.260035] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.260050] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.260079] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.260080] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.260205] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.260217] pnp 00:05: Plug and Play ACPI device, IDs DLL07be PNP0f13 (active)
[ 0.260397] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.260398] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.260399] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.260400] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.260401] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.260402] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.260403] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.260404] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.260405] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.260406] system 00:06: [mem 0xeffe0000-0xefffffff] has been reserved
[ 0.260407] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.260439] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.260440] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.260441] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.260442] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.260442] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.260443] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.260444] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.260446] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.260723] system 00:08: [io 0xff00-0xfffe] has been reserved
[ 0.260724] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.261755] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.261756] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.261757] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.261759] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.264273] pnp: PnP ACPI: found 10 devices
[ 0.272026] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.272072] pci 0000:00:1d.6: bridge window [io 0x1000-0x0fff] to [bus 05-3d] add_size 1000
[ 0.272076] pci 0000:00:1d.6: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.272078] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.272079] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.272081] pci 0000:00:01.0: bridge window [mem 0xec000000-0xed0fffff]
[ 0.272083] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.272086] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.272091] pci 0000:00:1c.0: bridge window [mem 0xed200000-0xed3fffff]
[ 0.272101] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.272103] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.272108] pci 0000:00:1c.1: bridge window [mem 0xed400000-0xeddfffff]
[ 0.272112] pci 0000:00:1c.1: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[ 0.272119] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 0.272133] pci 0000:00:1d.6: PCI bridge to [bus 05-3d]
[ 0.272135] pci 0000:00:1d.6: bridge window [io 0x2000-0x2fff]
[ 0.272140] pci 0000:00:1d.6: bridge window [mem 0xd4000000-0xea0fffff]
[ 0.272144] pci 0000:00:1d.6: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.272151] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.272152] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.272153] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.272154] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xefffffff window]
[ 0.272154] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.272155] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.272156] pci_bus 0000:01: resource 1 [mem 0xec000000-0xed0fffff]
[ 0.272157] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.272158] pci_bus 0000:02: resource 1 [mem 0xed200000-0xed3fffff]
[ 0.272158] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.272159] pci_bus 0000:03: resource 1 [mem 0xed400000-0xeddfffff]
[ 0.272160] pci_bus 0000:03: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
[ 0.272161] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.272162] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xea0fffff]
[ 0.272162] pci_bus 0000:05: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.272285] NET: Registered protocol family 2
[ 0.272396] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.272486] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.272567] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.272590] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.272607] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.272645] NET: Registered protocol family 1
[ 0.272656] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.273648] PCI: CLS 0 bytes, default 64
[ 0.273673] Unpacking initramfs...
[ 0.921123] Freeing initrd memory: 49652K
[ 0.921178] DMAR: ACPI device "device:6e" under DMAR at fed91000 as 00:15.0
[ 0.921181] DMAR: ACPI device "device:6f" under DMAR at fed91000 as 00:15.1
[ 0.921193] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.921195] software IO TLB [mem 0x709d0000-0x749d0000] (64MB) mapped at [ffff8b50b09d0000-ffff8b50b49cffff]
[ 0.921447] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[ 0.921670] Scanning for low memory corruption every 60 seconds
[ 0.921975] audit: initializing netlink subsys (disabled)
[ 0.922047] audit: type=2000 audit(1511129000.922:1): state=initialized audit_enabled=0 res=1
[ 0.922357] Initialise system trusted keyrings
[ 0.922365] Key type blacklist registered
[ 0.922423] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.923256] zbud: loaded
[ 0.923535] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.923682] fuse init (API version 7.26)
[ 0.926343] Key type asymmetric registered
[ 0.926343] Asymmetric key parser 'x509' registered
[ 0.926365] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.926429] io scheduler noop registered
[ 0.926430] io scheduler deadline registered
[ 0.926447] io scheduler cfq registered (default)
[ 0.927555] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[ 0.927586] pcieport 0000:00:1c.1: AER enabled with IRQ 123
[ 0.927615] pcieport 0000:00:1d.6: AER enabled with IRQ 124
[ 0.927659] efifb: probing for efifb
[ 0.927668] efifb: framebuffer at 0x80000000, using 8128k, total 8128k
[ 0.927669] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.927669] efifb: scrolling: redraw
[ 0.927670] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.927754] Console: switching to colour frame buffer device 240x67
[ 0.927773] fb0: EFI VGA frame buffer device
[ 0.927778] intel_idle: MWAIT substates: 0x11142120
[ 0.927778] intel_idle: v0.4.1 model 0x9E
[ 0.928208] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.928779] ACPI: AC Adapter [AC] (on-line)
[ 0.929343] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.929873] ACPI: Lid Switch [LID0]
[ 0.929895] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.929942] ACPI: Power Button [PBTN]
[ 0.929960] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.929969] ACPI: Sleep Button [SBTN]
[ 0.929988] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.930037] ACPI: Power Button [PWRF]
[ 0.931251] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.931791] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.931792] ACPI: Thermal Zone [THM] (25 C)
[ 0.931818] GHES: HEST is not enabled!
[ 0.931931] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.934969] Linux agpgart interface v0.103
[ 0.955050] ACPI: Battery Slot [BAT0] (battery present)
[ 0.980301] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
[ 1.948487] clocksource: Switched to clocksource tsc
[ 2.087592] loop: module loaded
[ 2.087710] libphy: Fixed MDIO Bus: probed
[ 2.087710] tun: Universal TUN/TAP device driver, 1.6
[ 2.087729] PPP generic driver version 2.4.2
[ 2.087753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.087754] ehci-pci: EHCI PCI platform driver
[ 2.087762] ehci-platform: EHCI generic platform driver
[ 2.087770] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.087771] ohci-pci: OHCI PCI platform driver
[ 2.087776] ohci-platform: OHCI generic platform driver
[ 2.087780] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.087934] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.087940] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.089093] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 2.089098] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.089193] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.089194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.089195] usb usb1: Product: xHCI Host Controller
[ 2.089195] usb usb1: Manufacturer: Linux 4.13.0-16-generic xhci-hcd
[ 2.089196] usb usb1: SerialNumber: 0000:00:14.0
[ 2.089297] hub 1-0:1.0: USB hub found
[ 2.089329] hub 1-0:1.0: 16 ports detected
[ 2.089584] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.089586] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.089611] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.089612] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.089613] usb usb2: Product: xHCI Host Controller
[ 2.089614] usb usb2: Manufacturer: Linux 4.13.0-16-generic xhci-hcd
[ 2.089614] usb usb2: SerialNumber: 0000:00:14.0
[ 2.089700] hub 2-0:1.0: USB hub found
[ 2.089718] hub 2-0:1.0: 8 ports detected
[ 2.090030] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.090522] i8042: Warning: Keylock active
[ 2.092805] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.092807] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.092947] mousedev: PS/2 mouse device common for all mice
[ 2.093258] rtc_cmos 00:02: RTC can wake from S4
[ 2.093697] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.093802] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.093807] i2c /dev entries driver
[ 2.093840] device-mapper: uevent: version 1.0.3
[ 2.093925] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
[ 2.093927] intel_pstate: Intel P-state driver initializing
[ 2.093973] intel_pstate: Disabling energy efficiency optimization
[ 2.094455] intel_pstate: HWP enabled
[ 2.094559] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.094655] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.094658] EFI Variables Facility v0.08 2004-May-17
[ 2.106353] NET: Registered protocol family 10
[ 2.108684] Segment Routing with IPv6
[ 2.108693] NET: Registered protocol family 17
[ 2.108698] Key type dns_resolver registered
[ 2.109291] RAS: Correctable Errors collector initialized.
[ 2.109306] microcode: sig=0x906e9, pf=0x20, revision=0x5e
[ 2.109582] microcode: Microcode Update Driver: v2.2.
[ 2.109587] sched_clock: Marking stable (2109580209, 0)->(2114387210, -4807001)
[ 2.109761] registered taskstats version 1
[ 2.109766] Loading compiled-in X.509 certificates
[ 2.111032] Loaded X.509 cert 'Build time autogenerated kernel key: 04409fd30ffab3ce9d2178c508b3c866d61d9a62'
[ 2.111280] Loaded UEFI:db cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' linked to secondary sys keyring
[ 2.111292] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 2.111305] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 2.112371] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[ 2.112691] zswap: loaded using pool lzo/zbud
[ 2.113500] Key type big_key registered
[ 2.113502] Key type trusted registered
[ 2.114236] Key type encrypted registered
[ 2.114238] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.416160] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 2.432243] evm: HMAC attrs: 0x1
[ 2.433550] Magic number: 9:307:98
[ 2.433745] rtc_cmos 00:02: setting system clock to 2017-11-19 22:03:23 UTC (1511129003)
[ 2.433898] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.433899] EDD information not available.
[ 2.433970] PM: Hibernation image not present or could not be loaded.
[ 2.435379] Freeing unused kernel memory: 2324K
[ 2.435379] Write protecting the kernel read-only data: 14336k
[ 2.435742] Freeing unused kernel memory: 948K
[ 2.435964] Freeing unused kernel memory: 104K
[ 2.436970] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.477748] wmi_bus wmi_bus-PNP0C14:03: WQBC data block query control method not found
[ 2.484763] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.486896] ahci 0000:00:17.0: version 3.0
[ 2.487027] ahci 0000:00:17.0: Found 1 remapped NVMe devices.
[ 2.487028] ahci 0000:00:17.0: Switch your BIOS from RAID to AHCI mode to use them.
[ 2.487047] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[ 2.487070] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl RAID mode
[ 2.487071] ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm led clo only pio slum part deso sadm sds apst
[ 2.487614] scsi host0: ahci
[ 2.487672] scsi host1: ahci
[ 2.487711] ata1: DUMMY
[ 2.487714] ata2: SATA max UDMA/133 abar m524288@0xed100000 port 0xed100180 irq 16
[ 2.489053] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
[ 2.510108] MXM: GUID detected in BIOS
[ 2.510147] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 2.510201] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 2.510240] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 2.510390] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
[ 2.510393] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 2.510393] nouveau: detected PR support, will not use DSM
[ 2.510423] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 2.510562] checking generic (80000000 7f0000) vs hw (c0000000 10000000)
[ 2.510563] checking generic (80000000 7f0000) vs hw (d0000000 2000000)
[ 2.510607] nouveau 0000:01:00.0: NVIDIA GP107 (137000a1)
[ 2.512093] [drm] Memory usable by graphics device = 4096M
[ 2.512094] checking generic (80000000 7f0000) vs hw (80000000 10000000)
[ 2.512094] fb: switching to inteldrmfb from EFI VGA
[ 2.512109] Console: switching to colour dummy device 80x25
[ 2.512160] [drm] Replacing VGA console driver
[ 2.518181] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.518182] [drm] Driver supports precise vblank timestamp query.
[ 2.532449] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[ 2.545909] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.545919] nouveau 0000:01:00.0: bios: version 86.07.3e.00.1c
[ 2.601810] nouveau 0000:01:00.0: fb: 4096 MiB GDDR5
[ 2.602655] usb 1-4: New USB device found, idVendor=0cf3, idProduct=e300
[ 2.602656] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.605509] vga_switcheroo: enabled
[ 2.605673] [TTM] Zone kernel: Available graphics memory: 4009802 kiB
[ 2.605674] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.605674] [TTM] Initializing pool allocator
[ 2.605676] [TTM] Initializing DMA pool allocator
[ 2.605703] nouveau 0000:01:00.0: DRM: VRAM: 4096 MiB
[ 2.605704] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 2.605705] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[ 2.605706] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[ 2.605707] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[ 2.605707] nouveau 0000:01:00.0: DRM: DCB version 4.1
[ 2.605708] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[ 2.720011] usb 1-12: new high-speed USB device number 3 using xhci_hcd
[ 2.807118] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.809077] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.809079] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.809080] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.809131] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.809362] ata2.00: supports DRM functions and may not be fully accessible
[ 2.809976] ata2.00: disabling queued TRIM support
[ 2.809977] ata2.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
[ 2.809978] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.812095] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.812096] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.812097] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.812140] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.812367] ata2.00: supports DRM functions and may not be fully accessible
[ 2.812920] ata2.00: disabling queued TRIM support
[ 2.814360] ata2.00: configured for UDMA/133
[ 2.814562] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 2.940774] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 2.940779] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 2.941380] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 2.984226] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.984603] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.984658] sd 1:0:0:0: [sda] Write Protect is off
[ 2.984659] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.984761] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.988139] usb 1-12: New USB device found, idVendor=0c45, idProduct=6713
[ 2.988140] usb 1-12: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.988153] usb 1-12: Product: Integrated_Webcam_HD
[ 2.988154] usb 1-12: Manufacturer: CN045G287248774PB2LJA01
[ 2.989965] sda: sda1 sda2
[ 2.991345] sd 1:0:0:0: [sda] supports TCG Opal
[ 2.991346] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.037196] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.038021] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 3.038113] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 3.038135] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input8
[ 3.061946] fbcon: inteldrmfb (fb0) is primary device
[ 3.062007] Console: switching to colour frame buffer device 240x67
[ 3.062023] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.144175] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.215818] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.241030] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 3.241169] systemd[1]: Detected architecture x86-64.
[ 3.241313] systemd[1]: Set hostname to <sat-XPS-15-9560>.
[ 3.293223] systemd[1]: Listening on udev Kernel Socket.
[ 3.293273] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.293361] systemd[1]: Created slice System Slice.
[ 3.293682] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.293751] systemd[1]: Listening on Journal Audit Socket.
[ 3.293777] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.293806] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.305357] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4646]
[ 3.306939] lp: driver loaded but no devices found
[ 3.308610] ppdev: user-space parallel port driver
[ 3.333818] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1206..]
[ 3.333820] psmouse serio1: synaptics: Your touchpad (PNP: DLL07be PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 3.341677] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 3.346091] systemd-journald[286]: Received request to flush runtime journal from PID 1
[ 3.388895] Adding 2097148k swap on /swapfile. Priority:-1 extents:6 across:2260988k SSFS
[ 3.393455] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x12e800/0x0, board id: 3125, fw id: 2378871
[ 3.407210] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20170531/nsprepkg-130)
[ 3.407405] input: Intel HID events as /devices/platform/INT33D5:00/input/input9
[ 3.412504] intel-hid INT33D5:00: platform supports 5 button array
[ 3.412563] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input10
[ 3.429532] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 3.436882] Bluetooth: Core ver 2.22
[ 3.436891] NET: Registered protocol family 31
[ 3.436891] Bluetooth: HCI device and connection manager initialized
[ 3.436893] Bluetooth: HCI socket layer initialized
[ 3.436895] Bluetooth: L2CAP socket layer initialized
[ 3.436897] Bluetooth: SCO socket layer initialized
[ 3.438058] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 3.444504] Bluetooth: HCI UART driver ver 2.3
[ 3.444506] Bluetooth: HCI UART protocol H4 registered
[ 3.444507] Bluetooth: HCI UART protocol BCSP registered
[ 3.444524] Bluetooth: HCI UART protocol LL registered
[ 3.444524] Bluetooth: HCI UART protocol ATH3K registered
[ 3.444526] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 3.444555] Bluetooth: HCI UART protocol Intel registered
[ 3.444569] Bluetooth: HCI UART protocol Broadcom registered
[ 3.444570] Bluetooth: HCI UART protocol QCA registered
[ 3.444570] Bluetooth: HCI UART protocol AG6XX registered
[ 3.444571] Bluetooth: HCI UART protocol Marvell registered
[ 3.444750] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 3.445612] usbcore: registered new interface driver btusb
[ 3.453663] media: Linux media interface: v0.10
[ 3.453706] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 3.453929] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 3.457329] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.458422] Linux video capture interface: v2.00
[ 3.461070] i2c_hid i2c-DLL07BE:01: i2c-DLL07BE:01 supply vdd not found, using dummy regulator
[ 3.462967] dell_wmi: Detected Dell WMI interface version 1
[ 3.463000] input: Dell WMI hotkeys as /devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11
[ 3.473803] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6713)
[ 3.474660] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 3.474661] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.474661] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.474662] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.474662] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.474663] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 3.485330] AVX2 version of gcm_enc/dec engaged.
[ 3.485331] AES CTR mode by8 optimization enabled
[ 3.492639] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.492681] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 3.492685] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.500016] uvcvideo 1-12:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.500018] uvcvideo 1-12:1.0: Entity type for entity Extension 3 was not initialized!
[ 3.500019] uvcvideo 1-12:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.500019] uvcvideo 1-12:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.500123] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input12
[ 3.500188] usbcore: registered new interface driver uvcvideo
[ 3.500189] USB Video Class driver (1.1.1)
[ 3.502530] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.557478] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 3.570393] intel_rapl: Found RAPL domain package
[ 3.570394] intel_rapl: Found RAPL domain core
[ 3.570395] intel_rapl: Found RAPL domain uncore
[ 3.570396] intel_rapl: Found RAPL domain dram
[ 3.572156] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 3.573230] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 3.599113] input: DLL07BE:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-21/i2c-DLL07BE:01/0018:06CB:7A13.0001/input/input14
[ 3.599167] hid-multitouch 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL07BE:01 06CB:7A13] on i2c-DLL07BE:01
[ 3.836292] [drm] RC6 on
[ 3.857089] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 3.857090] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 3.857425] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4-00022-QCARMSWPZ-2 api 6 features wowlan,ignore-otp crc32 4d458559
[ 3.924331] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 07ee144e
[ 4.500317] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 4.501027] ath10k_pci 0000:02:00.0: htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 4.534309] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.564386] random: crng init done
[ 4.564508] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 4.564509] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.564509] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 4.564510] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.564511] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.564511] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x18
[ 4.564512] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 4.564513] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 4.589730] ath: EEPROM regdomain: 0x6c
[ 4.589731] ath: EEPROM indicates we should expect a direct regpair map
[ 4.589732] ath: Country alpha2 being used: 00
[ 4.589732] ath: Regpair used: 0x6c
[ 4.594106] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 4.724520] audit: type=1400 audit(1511129005.790:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=655 comm="apparmor_parser"
[ 4.724627] audit: type=1400 audit(1511129005.790:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=658 comm="apparmor_parser"
[ 4.724656] audit: type=1400 audit(1511129005.790:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=656 comm="apparmor_parser"
[ 4.724794] audit: type=1400 audit(1511129005.791:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=659 comm="apparmor_parser"
[ 4.724796] audit: type=1400 audit(1511129005.791:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=659 comm="apparmor_parser"
[ 4.726005] audit: type=1400 audit(1511129005.792:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=662 comm="apparmor_parser"
[ 4.727212] audit: type=1400 audit(1511129005.793:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=664 comm="apparmor_parser"
[ 4.727248] audit: type=1400 audit(1511129005.793:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=660 comm="apparmor_parser"
[ 4.728334] audit: type=1400 audit(1511129005.794:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=652 comm="apparmor_parser"
[ 4.837422] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.837423] Bluetooth: BNEP filters: protocol multicast
[ 4.837426] Bluetooth: BNEP socket layer initialized
[ 5.159582] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.638633] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 5.638715] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 5.638783] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 5.638838] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 5.638891] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 5.638945] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 5.875805] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 5.928174] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 6.049057] IP
Dernière modification par Satire (Le 19/11/2017, à 23:06)
Hors ligne
#114 Le 19/11/2017, à 23:13
- Babdu89
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
?? a écrit;
Cependant, dans le bios, peux-tu essayer de regarder tout ce qui a trait au mode d'acces des ssd. raids? ahci? ou autre ?
Question?
Est-ce que çà a voir avec ce qui est évoqué post#2 de ce sujet-ci? ?
https://forum.ubuntu-fr.org/viewtopic.p … #p21801807
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#115 Le 19/11/2017, à 23:23
- ??
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Je ne sais pas te guider pour le bios, Au besoin, postes des photos de chaque onglet.
Car c'est bien dans le bios que tu vas devoir rectifier
487027] ahci 0000:00:17.0: Found 1 remapped NVMe devices.
[ 2.487028] ahci 0000:00:17.0: Switch your BIOS from RAID to AHCI mode to use them.
[ 2.487047] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
Mais je pense que cela ne doit pas être trop difficile vu cette explication qui est courte.
Select Bios Setup
Expand System Configuration and select SATA operation
Switch from RAID on to AHCI
Save and exit to boot into Windows 10 Safe mode
Pour babdu89,
c'est en lien très étroit.
Souvent ce problème survient pour les utilisateurs qui ont windows sur un gros disque et un petit ssd destiné à accélerer le demarrage.
Dans un tel contexte, il faut déactiver ISRT de windows puis du bios et ensuite casser le mode raids0 qui a été installé et qui permettait de voir le gros disque dur et le petit ssd comme le C:
Dernière modification par ?? (Le 19/11/2017, à 23:49)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#116 Le 19/11/2017, à 23:40
- Satire
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Alors voici quelques photos prises du bios :
- http://pix.tdct.org/upload/original/1511131060.jpg
- http://pix.tdct.org/upload/original/1511131120.jpg
- http://pix.tdct.org/upload/original/1511131158.jpg
- http://pix.tdct.org/upload/original/1511131201.jpg
Est-ce que cela répond à la question ??, ?
Dernière modification par Satire (Le 19/11/2017, à 23:47)
Hors ligne
#117 Le 19/11/2017, à 23:53
- ??
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Alors voici quelques photos prises du bios :
- http://pix.tdct.org/upload/original/1511131060.jpg
Est-ce que cela répond à la question ??, ?
j'espére que la souris va marcher. il faut que tu cliques sur AHCI ou dans le rond qui est á sa gauche.
en fait c'est certainement par le quatrième ecran que tu va pouvoir modifier.
Je ne sais pas trop ce qui va se passer pour windows s'il est équipé du mode IRST.
Certainement une réparation en automatique.
Dernière modification par ?? (Le 20/11/2017, à 00:02)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#118 Le 20/11/2017, à 00:03
- Satire
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Houuuuurrrrrrrrraaaaaaaaaaaaa !!!!!!!!!!!!!
Cela a l'air de fonctionner, car j'aperçois et j'ai accès désormais à Windows 10 depuis mon Ubuntu 17.10 (qui a redémarré automatiquement comme précédemment).
Voici les deux photos que des choix que j'ai dû valider durant la procédure :
- http://pix.tdct.org/upload/original/1511132524.jpg
- http://pix.tdct.org/upload/original/1511132587.jpg
Est-ce que tout est bon ? j'ai bien fait ?
Dernière modification par Satire (Le 20/11/2017, à 00:04)
Hors ligne
#119 Le 20/11/2017, à 00:07
- ??
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Le lien du poste 2 est certainement bien fait, car il prend en compte la notification à windows
The Windows 10 should be modified to enable the AHCI for dual boot.
Here are the steps which I took to enable the dual boot of Windows 10 and Ubuntu 17.04 on SATA mode set to AHCI on NVMe SSD (Toshiba)-
Created the Windows 10 local account before proceeding with the steps below
Right-click the Windows Start Menu. Choose Command Prompt (Admin).
Type this command and press ENTER: bcdedit /set {current} safeboot minimal
Restart the computer and enter BIOS Setup (the key to press varies between systems). On Dell Inspiron it is F2.
Change the SATA Operation mode to AHCI from either IDE or RAID.
Save changes and exit Setup and Windows will automatically boot to Safe Mode.
Right-click the Windows Start Menu once more. Choose Command Prompt (Admin).
Type this command and press ENTER: bcdedit /deletevalue {current} safeboot
Reboot once more and Windows will automatically start with AHCI drivers enabled.
Later installed the Ubuntu 17.04 from bootable usb by changing the boot sequence and disabling the secure boot option in BIOS. It worked like a charm.
Donc avant de modifier le bios,
il faut faire la commande suivante en mode administratif sous windows
bcdedit /set "{current}" safeboot minimal
puis faire la modification du bios pour passer de raid en ahci
puis booter windows et faire
bcdedit /deletevalue "{current}" safeboot
puis de nouveau rebooter windows qui est alors fonctionnel
Dernière modification par ?? (Le 21/11/2017, à 10:18)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#120 Le 20/11/2017, à 00:23
- ??
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Houuuuurrrrrrrrraaaaaaaaaaaaa !!!!!!!!!!!!!
Cela a l'air de fonctionner, car j'aperçois et j'ai accès désormais à Windows 10 depuis mon Ubuntu 17.10 (qui a redémarré automatiquement comme précédemment).
Voici les deux photos que des choix que j'ai dû valider durant la procédure :
- http://pix.tdct.org/upload/original/1511132524.jpg
- http://pix.tdct.org/upload/original/1511132587.jpgEst-ce que tout est bon ? j'ai bien fait ?
Merci du retour des photos.
il ne te reste plus qu'à regarder
sudo os-prober
sudo update-grub
sudo boot-info
qui pourrait ne plus fonctionner en 17.10 installée nativement.
Dernière modification par ?? (Le 20/11/2017, à 00:24)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#121 Le 20/11/2017, à 01:22
- Satire
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Très bien, et si je comprends bien, je n'ai pas de manipulation à faire par rapport à ce qui est mentionné au post #119 (en référence aux commandes indiquées..) ? Tout est en ordre ?
Voici le retour des commandes mentionnées au post #120 :
sat@sat-XPS-15-9560:~$ sudo os-prober
[sudo] Mot de passe de sat :
find: ‘/var/lib/os-prober/mount/efi/dell/logs’: Erreur d'entrée/sortie
/dev/nvme0n1p1@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
sat@sat-XPS-15-9560:~$
Puis :
sat@sat-XPS-15-9560:~$ sudo update-grub
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.13.0-16-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.13.0-16-generic
find: ‘/var/lib/os-prober/mount/efi/dell/logs’: Erreur d'entrée/sortie
Windows Boot Manager trouvé sur /dev/nvme0n1p1@/efi/Microsoft/Boot/bootmgfw.efi
Adding boot menu entry for EFI firmware configuration
fait
sat@sat-XPS-15-9560:~$
Et enfin ici :
sat@sat-XPS-15-9560:~$ sudo boot-info
No protocol specified
Unable to init server: Could not connect: Connection refused
No protocol specified
Unable to init server: Impossible de se connecter : Connection refused
/usr/share/boot-sav/bs-cmd.sh : ligne 17 : 4446 Erreur de segmentation (core dumped) $G2S $1 -g /usr/share/boot-sav/boot-sav.glade -s /usr/share/boot-sav/$APPNAME.sh --combobox="@@_combobox_format_partition@@col" --combobox="@@_combobox_bootflag@@col" --combobox="@@_combobox_ostoboot_bydefault@@col" --combobox="@@_combobox_purge_grub@@col" --combobox="@@_combobox_separateboot@@col" --combobox="@@_combobox_efi@@col" --combobox="@@_combobox_sepusr@@col" --combobox="@@_combobox_place_grub@@col" --combobox="@@_combobox_add_kernel_option@@col" --combobox="@@_combobox_restore_mbrof@@col" --combobox="@@_combobox_partition_booted_bymbr@@col"
No protocol specified
xhost: unable to open display ":0"
sat@sat-XPS-15-9560:~$
J'ajoute ici l'image de la liste des choix qui semble désormais apparaître automatiquement au redémarrage de l'ordinateur : http://pix.tdct.org/upload/original/1511142061.jpg
Dernière modification par Satire (Le 20/11/2017, à 02:42)
Hors ligne
#122 Le 20/11/2017, à 09:14
- Babdu89
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Bonjour.
@Satire.
Les deux ssd branchés.
stp, essaye de faire le boot info depuis une session live lancée en mode UEFI, ajout de nomodeset au démarrage.
Merci
@+. Babdu89 .
Dernière modification par Babdu89 (Le 20/11/2017, à 09:15)
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#123 Le 20/11/2017, à 10:05
- ??
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
......
Et enfin ici :sat@sat-XPS-15-9560:~$ sudo boot-info No protocol specified Unable to init server: Could not connect: Connection refused No protocol specified Unable to init server: Impossible de se connecter : Connection refused /usr/share/boot-sav/bs-cmd.sh : ligne 17 : 4446 Erreur de segmentation (core dumped) $G2S $1 -g /usr/share/boot-sav/boot-sav.glade -s /usr/share/boot-sav/$APPNAME.sh --combobox="@@_combobox_format_partition@@col" --combobox="@@_combobox_bootflag@@col" --combobox="@@_combobox_ostoboot_bydefault@@col" --combobox="@@_combobox_purge_grub@@col" --combobox="@@_combobox_separateboot@@col" --combobox="@@_combobox_efi@@col" --combobox="@@_combobox_sepusr@@col" --combobox="@@_combobox_place_grub@@col" --combobox="@@_combobox_add_kernel_option@@col" --combobox="@@_combobox_restore_mbrof@@col" --combobox="@@_combobox_partition_booted_bymbr@@col" No protocol specified xhost: unable to open display ":0" sat@sat-XPS-15-9560:~$
Bonjour.
Cela, je m'y attendais un peu car tu n'avais pas eu besoin de déactiver le logiciel standard d'accès à la carte graphique ( "nouveau").
Donc,dorénavant, tu ne peux plus exécuter des commandes du style gparted ( à remplacer par l'application disque ) gedit ( à remplacer par l'application nano) etc.....
et donc boot-info... Il y en aura certainement d'autres à découvrir. ( https://forum.ubuntu-fr.org/viewtopic.php?id=2007679 )
Je te propose donc de remplacer boot-info par un audit fait par bisnext qui a été viré de la documentation et qui est plus simple d'utilisation pour tout le monde. de mon point de vue.
Donc, toujours avec ton ubuntu opérationnel.
1) Télécharger le package.
sudo add-apt-repository ppa:cematinla/bisnext
sudo apt-get update
2) exécuter le package.
sudo bisnext --ctags
3) Copier/coller le résultat dans la discussion.
On verra probablement plus de traces sur l'incident NVME
Au fait, lorsque tu choisis "windows" à partir de l'écran "grub", est-ce que windows se lance bien et fonctionne?
Dernière modification par ?? (Le 20/11/2017, à 10:22)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#124 Le 20/11/2017, à 11:40
- Babdu89
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Bonjour.
On peut aussi redémarrer la machine et choisir Xorg depuis la page de connexion.
https://forum.ubuntu-fr.org/viewtopic.php?id=2016342
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#125 Le 20/11/2017, à 11:52
- ??
Re : [RésoIu] Installer un Dual boot Windows10/Ubuntu sur un XPS 15 à 2 SSD
Bonjour Babdu89.
Il n'y a même pas besoin de redémarrer la machine.
Il aurait suffit que les experts en gestion documentaire ne suppriment pas ce qui était écrit dans la doc de boot-info et aujourd'hui je n'ai pas envie de remettre ce qui a été supprimé car il est possible qu'ils ne veulent plus entendre parler de UNITY dans la doc à partir de la version 17.10.
De mémoire c'était une commande qui ressemblait à xhost + . Elle permettait d'avoir une autorisation d'utilisation puis de faire le boot-info puis de faire xhost - pour de nouveau interdire l 'écrire dans l'écran pour les personnes qui ne sont pas autorisées (en l'occurrence root!)
https://forum.ubuntu-fr.org/viewtopic.p … #p21800136
Notes cependant qu'en connexion automatique, on n'a pas cette possibilité de choix.
Dernière modification par ?? (Le 20/11/2017, à 11:56)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne