Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 16/01/2018, à 10:40

tkb128

[Résolu]Tablette Nexus 7

Bonjour,

Mon nouvel ordinateur tourne sous Ubuntu 16.04 LTS  Il ne reconnaît pas ma tablette Nexus 7.
Si je branche mon GPS, mon téléphone ces derniers apparaissentt dans les unités périphériques.

Sur mon ancien ordinateur tournant sous Ubuntu 16.04 LTS ma tablette est bien reconnue : lorsque je la connecte une fenêtre "Nexus 7" s'affiche.

merci de votre aide

Dernière modification par tkb128 (Le 21/01/2018, à 18:44)

Hors ligne

#2 Le 16/01/2018, à 11:44

LeJediGris

Re : [Résolu]Tablette Nexus 7

Salut,

Débranche ta tablette, rebranche-là et donne le retour (entre balises "code", les <> au dessus dans la fenêtre de composition de message)

dmesg | tail -30

A+

%NOINDEX%
Matos Asus Zenbook
"Home Made" Monstro: core i7 9700+32Go de mémoire+SSD QVO Samsung 1To +MoBo Asus Prime Z390P
+ "Terminator", core i5 3570, 16Go, SSD Intel 520 sous Mint 19.3, Freebox Revolution

Hors ligne

#3 Le 16/01/2018, à 17:00

tkb128

Re : [Résolu]Tablette Nexus 7

bonjour,

serge@serge-GL553VD:~$ dmesg | tail -30
[    5.458885] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.458923] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.458960] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.458997] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.459033] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.459070] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.459106] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.459142] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.459179] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.459215] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.459251] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.459288] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.459324] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.459360] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.459396] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.459445] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.459502] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    5.704793] nvidia-modeset: Allocated GPU:0 (GPU-f676b38c-66e5-bea8-158d-4732ae8061a2) @ PCI:0000:01:00.0
[    5.704966] nvidia-modeset: Freed GPU:0 (GPU-f676b38c-66e5-bea8-158d-4732ae8061a2) @ PCI:0000:01:00.0
[    9.028553] Bluetooth: RFCOMM TTY layer initialized
[    9.028557] Bluetooth: RFCOMM socket layer initialized
[    9.028560] Bluetooth: RFCOMM ver 1.11
[   28.359465] wlp2s0: authenticate with 1e:1e:0f:52:fe:d8
[   28.363358] wlp2s0: send auth to 1e:1e:0f:52:fe:d8 (try 1/3)
[   28.365454] wlp2s0: authenticated
[   28.365550] iwlwifi 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
[   28.372006] wlp2s0: associate with 1e:1e:0f:52:fe:d8 (try 1/3)
[   28.374758] wlp2s0: RX AssocResp from 1e:1e:0f:52:fe:d8 (capab=0x411 status=0 aid=2)
[   28.376045] wlp2s0: associated
[   28.376080] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
serge@serge-GL553VD:~$

Hors ligne

#4 Le 16/01/2018, à 17:03

LeJediGris

Re : [Résolu]Tablette Nexus 7

Re-

Curieux, il ne voit pas la connexion... essaye en changeant de port USB (c'est en USB 2 ou 3 ?)
refait la manip précédente  et donne aussi le retour de

lsusb

A+

%NOINDEX%
Matos Asus Zenbook
"Home Made" Monstro: core i7 9700+32Go de mémoire+SSD QVO Samsung 1To +MoBo Asus Prime Z390P
+ "Terminator", core i5 3570, 16Go, SSD Intel 520 sous Mint 19.3, Freebox Revolution

Hors ligne

#5 Le 17/01/2018, à 18:29

tkb128

Re : [Résolu]Tablette Nexus 7

bonjour,

ma tablette est de nouveau reconnue depuis ce matin. je viens de faire un autre essai et ça marche !.
je te remercie de ton aide.
Je te pose une autre question concernant les périphériques : il y a quelques jours j'ai acheté une caméra embarquée. Je l'ai connectée sur mon ordinateur et elle apparaissait comme unité D60 depuis elle n'apparaît plus, je t'envoie le résultat du dmesg

serge@serge-GL553VD:~$ dmesg | tail -30
[ 1146.941094] usb 1-2: device descriptor read/64, error -71
[ 1147.169073] usb 1-2: device descriptor read/64, error -71
[ 1147.397048] usb 1-2: new full-speed USB device number 16 using xhci_hcd
[ 1147.517088] usb 1-2: device descriptor read/64, error -71
[ 1147.745091] usb 1-2: device descriptor read/64, error -71
[ 1147.973070] usb 1-2: new full-speed USB device number 17 using xhci_hcd
[ 1147.973388] usb 1-2: Device not responding to setup address.
[ 1148.181373] usb 1-2: Device not responding to setup address.
[ 1148.388954] usb 1-2: device not accepting address 17, error -71
[ 1148.508958] usb 1-2: new full-speed USB device number 18 using xhci_hcd
[ 1148.509181] usb 1-2: Device not responding to setup address.
[ 1148.717228] usb 1-2: Device not responding to setup address.
[ 1148.925088] usb 1-2: device not accepting address 18, error -71
[ 1148.925135] usb usb1-port2: unable to enumerate USB device
[ 1684.127114] usb 1-2: new full-speed USB device number 19 using xhci_hcd
[ 1685.243148] usb 1-2: new full-speed USB device number 20 using xhci_hcd
[ 1685.363166] usb 1-2: device descriptor read/64, error -71
[ 1685.591147] usb 1-2: device descriptor read/64, error -71
[ 1685.819116] usb 1-2: new full-speed USB device number 21 using xhci_hcd
[ 1685.943091] usb 1-2: device descriptor read/64, error -71
[ 1686.171171] usb 1-2: device descriptor read/64, error -71
[ 1686.399135] usb 1-2: new full-speed USB device number 22 using xhci_hcd
[ 1686.399451] usb 1-2: Device not responding to setup address.
[ 1686.607445] usb 1-2: Device not responding to setup address.
[ 1686.815126] usb 1-2: device not accepting address 22, error -71
[ 1686.935113] usb 1-2: new full-speed USB device number 23 using xhci_hcd
[ 1686.935430] usb 1-2: Device not responding to setup address.
[ 1687.143449] usb 1-2: Device not responding to setup address.
[ 1687.351059] usb 1-2: device not accepting address 23, error -71
[ 1687.351102] usb usb1-port2: unable to enumerate USB device
serge@serge-GL553VD:~$

Hors ligne

#6 Le 18/01/2018, à 10:08

LeJediGris

Re : [Résolu]Tablette Nexus 7

Salut,

Content pour ton Nexus. Pour la caméra, refait la même manip (débranche, rebranche et dmesg | tail -30) et donnes le retour de

lsusb

A+

%NOINDEX%
Matos Asus Zenbook
"Home Made" Monstro: core i7 9700+32Go de mémoire+SSD QVO Samsung 1To +MoBo Asus Prime Z390P
+ "Terminator", core i5 3570, 16Go, SSD Intel 520 sous Mint 19.3, Freebox Revolution

Hors ligne

#7 Le 19/01/2018, à 08:00

tkb128

Re : [Résolu]Tablette Nexus 7

bonjour,

 serge@serge-GL553VD:~$ dmesg | tail -30
[  575.475847] usb 1-2: new full-speed USB device number 11 using xhci_hcd
[  575.595907] usb 1-2: device descriptor read/64, error -71
[  575.823893] usb 1-2: device descriptor read/64, error -71
[  576.051852] usb 1-2: new full-speed USB device number 12 using xhci_hcd
[  576.171862] usb 1-2: device descriptor read/64, error -71
[  576.399850] usb 1-2: device descriptor read/64, error -71
[  576.627820] usb 1-2: new full-speed USB device number 13 using xhci_hcd
[  576.628102] usb 1-2: Device not responding to setup address.
[  576.836049] usb 1-2: Device not responding to setup address.
[  577.043883] usb 1-2: device not accepting address 13, error -71
[  577.163904] usb 1-2: new full-speed USB device number 14 using xhci_hcd
[  577.164156] usb 1-2: Device not responding to setup address.
[  577.371999] usb 1-2: Device not responding to setup address.
[  577.579759] usb 1-2: device not accepting address 14, error -71
[  577.579803] usb usb1-port2: unable to enumerate USB device
[  621.141373] usb 1-2: new full-speed USB device number 15 using xhci_hcd
[  621.261395] usb 1-2: device descriptor read/64, error -71
[  621.489497] usb 1-2: device descriptor read/64, error -71
[  621.717491] usb 1-2: new full-speed USB device number 16 using xhci_hcd
[  621.837358] usb 1-2: device descriptor read/64, error -71
[  622.065356] usb 1-2: device descriptor read/64, error -71
[  622.293372] usb 1-2: new full-speed USB device number 17 using xhci_hcd
[  622.293625] usb 1-2: Device not responding to setup address.
[  622.501572] usb 1-2: Device not responding to setup address.
[  622.709347] usb 1-2: device not accepting address 17, error -71
[  622.829347] usb 1-2: new full-speed USB device number 18 using xhci_hcd
[  622.829589] usb 1-2: Device not responding to setup address.
[  623.037660] usb 1-2: Device not responding to setup address.
[  623.245401] usb 1-2: device not accepting address 18, error -71
[  623.245449] usb usb1-port2: unable to enumerate USB device
serge@serge-GL553VD:~$ lsub
La commande « lsub » est introuvable, vouliez-vous dire :
 La commande « lsusb » du paquet « usbutils » (main)
 La commande « qsub » du paquet « torque-client » (universe)
 La commande « qsub » du paquet « torque-client-x11 » (universe)
 La commande « qsub » du paquet « slurm-wlm-torque » (universe)
 La commande « qsub » du paquet « gridengine-client » (universe)
lsub : commande introuvable
serge@serge-GL553VD:~$ sudo lsub
[sudo] Mot de passe de serge : 
sudo: lsub : commande introuvable
serge@serge-GL553VD:~$ sudo lshw -c bus
  *-core                  
       description: Carte mère
       produit: GL553VD
       fabriquant: ASUSTeK COMPUTER INC.
       identifiant matériel: 0
       version: 1.0
       numéro de série: BSN12345678901234567
       emplacement: Default string
  *-usb
       description: USB controller
       produit: Sunrise Point-H USB 3.0 xHCI Controller
       fabriquant: Intel Corporation
       identifiant matériel: 14
       information bus: pci@0000:00:14.0
       version: 31
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm msi xhci bus_master cap_list
       configuration: driver=xhci_hcd latency=0
       ressources: irq:122 mémoire:df410000-df41ffff
     *-usbhost:0
          produit: xHCI Host Controller
          fabriquant: Linux 4.13.0-26-generic xhci-hcd
          identifiant matériel: 0
          information bus: usb@1
          nom logique: usb1
          version: 4.13
          fonctionnalités: usb-2.00
          configuration: driver=hub slots=16 speed=480Mbit/s
     *-usbhost:1
          produit: xHCI Host Controller
          fabriquant: Linux 4.13.0-26-generic xhci-hcd
          identifiant matériel: 1
          information bus: usb@2
          nom logique: usb2
          version: 4.13
          fonctionnalités: usb-3.00
          configuration: driver=hub slots=8 speed=5000Mbit/s
  *-serial NON-RÉCLAMÉ
       description: SMBus
       produit: Sunrise Point-H SMBus
       fabriquant: Intel Corporation
       identifiant matériel: 1f.4
       information bus: pci@0000:00:1f.4
       version: 31
       bits: 64 bits
       horloge: 33MHz
       configuration: latency=0
       ressources: mémoire:df42a000-df42a0ff portE/S:f040(taille=32)
serge@serge-GL553VD:~$ echo $PATH
/home/serge/bin:/home/serge/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
serge@serge-GL553VD:~$ locate lsusb
/usr/bin/lsusb
/usr/share/man/man8/lsusb.8.gz
serge@serge-GL553VD:~$ /usr/bin/lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 8087:0a2a Intel Corp. 
Bus 001 Device 003: ID 0bda:57f5 Realtek Semiconductor Corp. 
Bus 001 Device 005: ID 0b05:1854 ASUSTek Computer, Inc. 
Bus 001 Device 002: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
serge@serge-GL553VD:~$

cdlt

Hors ligne

Pages : 1