[Résolu] Carte SD sur Dell Latitude E6520

bcd16 · Le 26/04/2018, à 11:13

Bonjour

Je viens d'acheter un ordi d'occasion sur lequel j'ai installé ubuntu 16.04.
Je n'arrive pas à lire la carte SD (j'en ai essayé plusieurs).

lspci donne :

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 04)
02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)

J'ai suivi un conseil de Bougron

Il faudrait que tu débranches la clé, que tu la rebranches , que tu attendes 15 secondes et que tu fasses la commande suivante:
dmesg | tail -40
et que tu postes le résultat.

et j'ai obtenu ça :

:~$ dmesg | tail -40
[   34.227438] random: crng init done
[  916.220466] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[  981.310331] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[  981.312711] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[  981.317916] wlp2s0: authenticated
[  981.320189] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[  981.325118] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=1)
[  981.332888] wlp2s0: associated
[ 1584.700783] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[ 1727.244429] wlp2s0: deauthenticating from bc:f2:af:d5:b7:52 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1730.491424] wlp2s0: authenticate with f4:ca:e5:c1:ee:a4
[ 1730.492789] wlp2s0: send auth to f4:ca:e5:c1:ee:a4 (try 1/3)
[ 1730.495270] wlp2s0: authenticated
[ 1730.497026] wlp2s0: associate with f4:ca:e5:c1:ee:a4 (try 1/3)
[ 1730.501113] wlp2s0: RX AssocResp from f4:ca:e5:c1:ee:a4 (capab=0x411 status=0 aid=2)
[ 1730.524605] wlp2s0: associated
[ 1734.503406] wlp2s0: deauthenticated from f4:ca:e5:c1:ee:a4 (Reason: 2=PREV_AUTH_NOT_VALID)
[ 1737.858469] wlp2s0: authenticate with f4:ca:e5:c1:ee:a4
[ 1737.859881] wlp2s0: send auth to f4:ca:e5:c1:ee:a4 (try 1/3)
[ 1737.862338] wlp2s0: authenticated
[ 1737.865191] wlp2s0: associate with f4:ca:e5:c1:ee:a4 (try 1/3)
[ 1737.869250] wlp2s0: RX AssocResp from f4:ca:e5:c1:ee:a4 (capab=0x411 status=0 aid=2)
[ 1737.894047] wlp2s0: associated
[ 1741.871277] wlp2s0: deauthenticated from f4:ca:e5:c1:ee:a4 (Reason: 2=PREV_AUTH_NOT_VALID)
[ 1742.502134] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1745.258616] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[ 1745.260157] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[ 1745.264448] wlp2s0: authenticated
[ 1745.265258] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[ 1745.271689] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=1)
[ 1745.279404] wlp2s0: associated
[ 1745.279466] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 2648.861634] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[ 2709.855248] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[ 2709.859135] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[ 2709.863559] wlp2s0: authenticated
[ 2709.867625] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[ 2709.872514] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=1)
[ 2709.879421] wlp2s0: associated
[ 3013.207644] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)

Quelqu'un peut il m'aider à rendre visible ma carte SD ?

Merci de votre aide

Dernière modification par bcd16 (Le 16/05/2018, à 13:34)

bcd16 · Le 28/04/2018, à 07:40

J'ai suivi Woshee

dmesg donne :

[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x50d with crng_init=0
[    0.000000] Linux version 4.13.0-36-generic (buildd@lgw01-amd64-033) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #40~16.04.1-Ubuntu SMP Fri Feb 16 23:25:58 UTC 2018 (Ubuntu 4.13.0-36.40~16.04.1-generic 4.13.13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-36-generic root=UUID=bd01cde5-bb94-46f5-be48-d3caa77777e2 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000caa24fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000caa25000-0x00000000caa68fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000caa69000-0x00000000cadb6fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cadb7000-0x00000000cade6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cade7000-0x00000000cafe6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cafe7000-0x00000000caffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc. Latitude E6520/0NVF5K, BIOS A08 10/18/2011
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x12e000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF8000000 write-back
[    0.000000]   3 base 0C8000000 mask FFC000000 write-back
[    0.000000]   4 base 0CB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FE0000000 write-back
[    0.000000]   6 base 120000000 mask FF0000000 write-back
[    0.000000]   7 base 12E000000 mask FFE000000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] total RAM covered: 3984M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 8  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f3710-0x000f371f] mapped at [ffff8820c00f3710]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff8820c0095000] 95000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0xa832a000, 0xa832afff] PGTABLE
[    0.000000] BRK [0xa832b000, 0xa832bfff] PGTABLE
[    0.000000] BRK [0xa832c000, 0xa832cfff] PGTABLE
[    0.000000] BRK [0xa832d000, 0xa832dfff] PGTABLE
[    0.000000] BRK [0xa832e000, 0xa832efff] PGTABLE
[    0.000000] BRK [0xa832f000, 0xa832ffff] PGTABLE
[    0.000000] BRK [0xa8330000, 0xa8330fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x321cc000-0x350ddfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE300 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000CAFFDE18 000074 (v01 DELL   CBX3     06222004 MSFT 00010013)
[    0.000000] ACPI: FACP 0x00000000CAF87D98 0000F4 (v04 DELL   CBX3     06222004 MSFT 00010013)
[    0.000000] ACPI: DSDT 0x00000000CAF55018 008774 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
[    0.000000] ACPI: FACS 0x00000000CAFE4E40 000040
[    0.000000] ACPI: FACS 0x00000000CAFE4D40 000040
[    0.000000] ACPI: APIC 0x00000000CAFFCF18 0000CC (v02 DELL   CBX3     06222004 MSFT 00010013)
[    0.000000] ACPI: TCPA 0x00000000CAFE5D18 000032 (v02                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x00000000CAF88A98 0002F9 (v01 DELLTP TPM      00003000 INTL 20090903)
[    0.000000] ACPI: MCFG 0x00000000CAFE5C98 00003C (v01 DELL   SNDYBRDG 06222004 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CAFE5C18 000038 (v01 A M I   PCHHPET 06222004 AMI. 00000003)
[    0.000000] ACPI: BOOT 0x00000000CAFE5B98 000028 (v01 DELL   CBX3     06222004 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000CAF6C018 00094E (v01 PmRef  Cpu0Ist  00003000 INTL 20090903)
[    0.000000] ACPI: SSDT 0x00000000CAF6B018 000996 (v01 PmRef  CpuPm    00003000 INTL 20090903)
[    0.000000] ACPI: SLIC 0x00000000CAF75C18 000176 (v03 DELL   CBX3     06222004 MSFT 00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012dffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x12dfd1000-0x12dffbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000012dffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009afff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000caa24fff]
[    0.000000]   node   0: [mem 0x00000000caa69000-0x00000000cadb6fff]
[    0.000000]   node   0: [mem 0x00000000cafff000-0x00000000caffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000012dffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012dffffff]
[    0.000000] On node 0 totalpages: 1018126
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 154 pages reserved
[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12902 pages used for memmap
[    0.000000]   DMA32 zone: 825716 pages, LIFO batch:31
[    0.000000]   Normal zone: 2944 pages used for memmap
[    0.000000]   Normal zone: 188416 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000cba00000-0x00000000cf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaa25000-0xcaa68fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcadb7000-0xcade6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcade7000-0xcafe6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcafe7000-0xcaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcb9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcba00000-0xcf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffc1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc20000-0xffffffff]
[    0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff8821e9200000 s146520 r8192 d29608 u262144
[    0.000000] pcpu-alloc: s146520 r8192 d29608 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1002062
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-36-generic root=UUID=bd01cde5-bb94-46f5-be48-d3caa77777e2 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3863204K/4072504K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2364K init, 2368K bss, 209300K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37831 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2195.060 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.12 BogoMIPS (lpj=8780240)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.013053] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.013084] Security Framework initialized
[    0.013086] Yama: becoming mindful.
[    0.013113] AppArmor: AppArmor initialized
[    0.014040] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.014574] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.014601] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.014619] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.014854] CPU: Physical Processor ID: 0
[    0.014855] CPU: Processor Core ID: 0
[    0.014861] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.014861] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.014865] FEATURE SPEC_CTRL Not Present
[    0.014866] mce: CPU supports 7 MCE banks
[    0.014875] CPU0: Thermal monitoring enabled (TM1)
[    0.014885] process: using mwait in idle threads
[    0.014888] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.014888] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.014890] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.014891] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[    0.015021] Freeing SMP alternatives memory: 36K
[    0.017549] smpboot: Max logical packages: 8
[    0.017627] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.017659] Switched APIC routing to physical flat.
[    0.018058] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057760] TSC deadline timer enabled
[    0.057764] smpboot: CPU0: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.057841] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.057863] core: PEBS disabled due to CPU errata, please upgrade microcode
[    0.057866] ... version:                3
[    0.057867] ... bit width:              48
[    0.057867] ... generic registers:      4
[    0.057868] ... value mask:             0000ffffffffffff
[    0.057869] ... max period:             00007fffffffffff
[    0.057870] ... fixed-purpose events:   3
[    0.057870] ... event mask:             000000070000000f
[    0.057914] Hierarchical SRCU implementation.
[    0.059152] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.059178] smp: Bringing up secondary CPUs ...
[    0.059278] x86: Booting SMP configuration:
[    0.059280] .... node  #0, CPUs:        #1  #2  #3
[    0.064057] smp: Brought up 1 node, 4 CPUs
[    0.064057] smpboot: Total of 4 processors activated (17560.48 BogoMIPS)
[    0.067303] devtmpfs: initialized
[    0.067303] x86/mm: Memory block size: 128MB
[    0.068239] evm: security.selinux
[    0.068240] evm: security.SMACK64
[    0.068240] evm: security.SMACK64EXEC
[    0.068241] evm: security.SMACK64TRANSMUTE
[    0.068242] evm: security.SMACK64MMAP
[    0.068242] evm: security.ima
[    0.068243] evm: security.capability
[    0.068261] PM: Registering ACPI NVS region [mem 0xcade7000-0xcafe6fff] (2097152 bytes)
[    0.068261] reboot: Dell Latitude E6520 series board detected. Selecting PCI-method for reboots.
[    0.068261] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.068261] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.068261] pinctrl core: initialized pinctrl subsystem
[    0.068338] RTC time:  9:18:53, date: 04/26/18
[    0.068428] NET: Registered protocol family 16
[    0.068616] cpuidle: using governor ladder
[    0.068616] cpuidle: using governor menu
[    0.068616] PCCT header not found.
[    0.068616] Simple Boot Flag at 0xf3 set to 0x1
[    0.068616] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.068616] ACPI: bus type PCI registered
[    0.068616] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.068616] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.068616] PCI: not using MMCONFIG
[    0.068616] PCI: Using configuration type 1 for base access
[    0.068616] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.069296] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.069298] ACPI: Added _OSI(Module Device)
[    0.069298] ACPI: Added _OSI(Processor Device)
[    0.069298] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.069298] ACPI: Added _OSI(Processor Aggregator Device)
[    0.072003] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.088391] ACPI: Dynamic OEM Table Load:
[    0.088399] ACPI: SSDT 0xFFFF8821E835A000 000727 (v01 PmRef  Cpu0Cst  00003001 INTL 20090903)
[    0.088522] ACPI: Dynamic OEM Table Load:
[    0.088522] ACPI: SSDT 0xFFFF8821E7DA9000 000303 (v01 PmRef  ApIst    00003000 INTL 20090903)
[    0.088522] ACPI: Dynamic OEM Table Load:
[    0.088522] ACPI: SSDT 0xFFFF8821E7DDC200 000119 (v01 PmRef  ApCst    00003000 INTL 20090903)
[    0.088630] ACPI: EC: EC started
[    0.088630] ACPI: EC: interrupt blocked
[    0.088761] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[    0.088761] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.088761] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[    0.088761] ACPI: Interpreter enabled
[    0.088761] ACPI: (supports S0 S3 S4 S5)
[    0.088761] ACPI: Using IOAPIC for interrupt routing
[    0.088761] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.088761] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.088761] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.088761] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.107032] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.107038] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.107076] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.107573] PCI host bridge to bus 0000:00
[    0.107575] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.107577] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.107579] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.107581] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
[    0.107582] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.107584] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.107593] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.107693] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.107705] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[    0.107711] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.107715] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.107830] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.107858] pci 0000:00:16.0: reg 0x10: [mem 0xe2da0000-0xe2da000f 64bit]
[    0.107936] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.108026] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.108048] pci 0000:00:19.0: reg 0x10: [mem 0xe2d00000-0xe2d1ffff]
[    0.108057] pci 0000:00:19.0: reg 0x14: [mem 0xe2d70000-0xe2d70fff]
[    0.108065] pci 0000:00:19.0: reg 0x18: [io  0x4060-0x407f]
[    0.108130] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.108215] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.108239] pci 0000:00:1a.0: reg 0x10: [mem 0xe2d60000-0xe2d603ff]
[    0.108327] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.108411] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.108435] pci 0000:00:1b.0: reg 0x10: [mem 0xe2d50000-0xe2d53fff 64bit]
[    0.108514] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.108605] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.108744] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.108846] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.108984] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.109083] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.109221] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.109323] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.109461] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.109561] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.109584] pci 0000:00:1d.0: reg 0x10: [mem 0xe2d40000-0xe2d403ff]
[    0.109672] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.109754] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.109938] pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f
[    0.109957] pci 0000:00:1f.2: reg 0x10: [io  0x4130-0x4137]
[    0.109965] pci 0000:00:1f.2: reg 0x14: [io  0x4120-0x4123]
[    0.109974] pci 0000:00:1f.2: reg 0x18: [io  0x4110-0x4117]
[    0.109982] pci 0000:00:1f.2: reg 0x1c: [io  0x4100-0x4103]
[    0.109991] pci 0000:00:1f.2: reg 0x20: [io  0x40f0-0x40ff]
[    0.109999] pci 0000:00:1f.2: reg 0x24: [io  0x40e0-0x40ef]
[    0.110102] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.110123] pci 0000:00:1f.3: reg 0x10: [mem 0xe2d30000-0xe2d300ff 64bit]
[    0.110145] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.110239] pci 0000:00:1f.5: [8086:1c09] type 00 class 0x010185
[    0.110257] pci 0000:00:1f.5: reg 0x10: [io  0x40d0-0x40d7]
[    0.110266] pci 0000:00:1f.5: reg 0x14: [io  0x40c0-0x40c3]
[    0.110274] pci 0000:00:1f.5: reg 0x18: [io  0x40b0-0x40b7]
[    0.110283] pci 0000:00:1f.5: reg 0x1c: [io  0x40a0-0x40a3]
[    0.110291] pci 0000:00:1f.5: reg 0x20: [io  0x4090-0x409f]
[    0.110300] pci 0000:00:1f.5: reg 0x24: [io  0x4080-0x408f]
[    0.110469] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.110702] pci 0000:02:00.0: [8086:0082] type 00 class 0x028000
[    0.110922] pci 0000:02:00.0: reg 0x10: [mem 0xe2c00000-0xe2c01fff 64bit]
[    0.111676] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.120168] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.120177] pci 0000:00:1c.1:   bridge window [mem 0xe2c00000-0xe2cfffff]
[    0.120281] acpiphp: Slot [1] registered
[    0.120289] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
[    0.120294] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.120299] pci 0000:00:1c.2:   bridge window [mem 0xe2200000-0xe2bfffff]
[    0.120308] pci 0000:00:1c.2:   bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
[    0.120381] pci 0000:00:1c.3: PCI bridge to [bus 09]
[    0.120386] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.120391] pci 0000:00:1c.3:   bridge window [mem 0xe1800000-0xe21fffff]
[    0.120400] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[    0.122272] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.122329] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.122383] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.122436] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.122489] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.122541] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.122595] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.122647] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.124588] ACPI: EC: interrupt unblocked
[    0.124594] ACPI: EC: event unblocked
[    0.124602] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.124604] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[    0.124850] SCSI subsystem initialized
[    0.124866] libata version 3.00 loaded.
[    0.124866] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.124866] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.124866] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.124866] vgaarb: loaded
[    0.124866] ACPI: bus type USB registered
[    0.124866] usbcore: registered new interface driver usbfs
[    0.124866] usbcore: registered new interface driver hub
[    0.124866] usbcore: registered new device driver usb
[    0.124866] EDAC MC: Ver: 3.0.0
[    0.124866] PCI: Using ACPI for IRQ routing
[    0.125755] PCI: pci_cache_line_size set to 64 bytes
[    0.125857] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
[    0.125858] e820: reserve RAM buffer [mem 0xcaa25000-0xcbffffff]
[    0.125860] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
[    0.125861] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[    0.125863] e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff]
[    0.125949] NetLabel: Initializing
[    0.125950] NetLabel:  domain hash size = 128
[    0.125951] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.125968] NetLabel:  unlabeled traffic allowed by default
[    0.125984] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.125984] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.130025] clocksource: Switched to clocksource hpet
[    0.139015] VFS: Disk quotas dquot_6.6.0
[    0.139046] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.139158] AppArmor: AppArmor Filesystem Enabled
[    0.139214] pnp: PnP ACPI init
[    0.139392] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.139397] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.139447] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.139449] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.139451] system 00:01: [io  0xffff] has been reserved
[    0.139453] system 00:01: [io  0xffff] has been reserved
[    0.139455] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.139457] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.139459] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.139462] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.139488] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.139511] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.140298] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (disabled)
[    0.140323] pnp 00:05: Plug and Play ACPI device, IDs DLL0494 PNP0f13 (active)
[    0.140498] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.140500] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.140502] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.140504] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.140506] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.140508] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.140510] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.140512] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.140514] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.140516] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.140519] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.143269] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
[    0.143271] system 00:07: [mem 0x40000000-0x401fffff] has been reserved
[    0.143275] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.143282] pnp: PnP ACPI: found 8 devices
[    0.149986] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.150041] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.150059] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.150066] pci 0000:00:1c.1:   bridge window [mem 0xe2c00000-0xe2cfffff]
[    0.150078] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
[    0.150082] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.150088] pci 0000:00:1c.2:   bridge window [mem 0xe2200000-0xe2bfffff]
[    0.150093] pci 0000:00:1c.2:   bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
[    0.150102] pci 0000:00:1c.3: PCI bridge to [bus 09]
[    0.150105] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.150112] pci 0000:00:1c.3:   bridge window [mem 0xe1800000-0xe21fffff]
[    0.150118] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[    0.150127] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.150129] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.150131] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.150133] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
[    0.150134] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.150136] pci_bus 0000:02: resource 1 [mem 0xe2c00000-0xe2cfffff]
[    0.150138] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.150140] pci_bus 0000:03: resource 1 [mem 0xe2200000-0xe2bfffff]
[    0.150141] pci_bus 0000:03: resource 2 [mem 0xe0a00000-0xe13fffff 64bit pref]
[    0.150143] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.150145] pci_bus 0000:09: resource 1 [mem 0xe1800000-0xe21fffff]
[    0.150146] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
[    0.150238] NET: Registered protocol family 2
[    0.150409] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.150486] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.150584] TCP: Hash tables configured (established 32768 bind 32768)
[    0.150632] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.150649] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.150714] NET: Registered protocol family 1
[    0.150728] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.151207] PCI: CLS 64 bytes, default 64
[    0.151252] Unpacking initramfs...
[    1.007123] Freeing initrd memory: 48200K
[    1.007127] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.007131] software IO TLB [mem 0xc6a25000-0xcaa25000] (64MB) mapped at [ffff882186a25000-ffff88218aa24fff]
[    1.007358] Scanning for low memory corruption every 60 seconds
[    1.007812] audit: initializing netlink subsys (disabled)
[    1.007858] audit: type=2000 audit(1524734334.007:1): state=initialized audit_enabled=0 res=1
[    1.008270] Initialise system trusted keyrings
[    1.008281] Key type blacklist registered
[    1.008319] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.009578] zbud: loaded
[    1.010116] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.010261] fuse init (API version 7.26)
[    1.011774] Key type asymmetric registered
[    1.011775] Asymmetric key parser 'x509' registered
[    1.011814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.011854] io scheduler noop registered
[    1.011855] io scheduler deadline registered
[    1.011883] io scheduler cfq registered (default)
[    1.012737] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    1.012738] vesafb: scrolling: redraw
[    1.012740] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.012750] vesafb: framebuffer at 0xd0000000, mapped to 0xffffa80d01000000, using 4160k, total 4160k
[    1.012843] Console: switching to colour frame buffer device 170x48
[    1.012864] fb0: VESA VGA frame buffer device
[    1.012877] intel_idle: MWAIT substates: 0x21120
[    1.012878] intel_idle: v0.4.1 model 0x2A
[    1.013035] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.013438] ACPI: AC Adapter [AC] (off-line)
[    1.013780] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.014084] ACPI: Lid Switch [LID]
[    1.014122] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.014145] ACPI: Power Button [PBTN]
[    1.014180] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.014188] ACPI: Sleep Button [SBTN]
[    1.014220] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.014241] ACPI: Power Button [PWRF]
[    1.014977] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.015223] thermal LNXTHERM:00: registered as thermal_zone0
[    1.015224] ACPI: Thermal Zone [THM] (25 C)
[    1.015260] GHES: HEST is not enabled!
[    1.015410] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.017942] Linux agpgart interface v0.103
[    1.019801] loop: module loaded
[    1.019913] ata_piix 0000:00:1f.2: version 2.13
[    1.020045] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.025829] ACPI: Battery Slot [BAT0] (battery present)
[    1.026542] ACPI: Battery Slot [BAT1] (battery absent)
[    1.027296] ACPI: Battery Slot [BAT2] (battery absent)
[    1.180604] scsi host0: ata_piix
[    1.180862] scsi host1: ata_piix
[    1.180915] ata1: SATA max UDMA/133 cmd 0x4130 ctl 0x4120 bmdma 0x40f0 irq 18
[    1.180920] ata2: SATA max UDMA/133 cmd 0x4110 ctl 0x4100 bmdma 0x40f8 irq 18
[    1.181081] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.340095] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[    1.340352] scsi host2: ata_piix
[    1.340500] scsi host3: ata_piix
[    1.340546] ata3: SATA max UDMA/133 cmd 0x40d0 ctl 0x40c0 bmdma 0x4090 irq 18
[    1.340547] ata4: SATA max UDMA/133 cmd 0x40b0 ctl 0x40a0 bmdma 0x4098 irq 18
[    1.340650] libphy: Fixed MDIO Bus: probed
[    1.340651] tun: Universal TUN/TAP device driver, 1.6
[    1.340720] PPP generic driver version 2.4.2
[    1.340779] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.340786] ehci-pci: EHCI PCI platform driver
[    1.340922] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.340929] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.340942] ehci-pci 0000:00:1a.0: debug port 2
[    1.344833] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.344844] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe2d60000
[    1.360023] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.360062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.360064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.360066] usb usb1: Product: EHCI Host Controller
[    1.360067] usb usb1: Manufacturer: Linux 4.13.0-36-generic ehci_hcd
[    1.360069] usb usb1: SerialNumber: 0000:00:1a.0
[    1.360181] hub 1-0:1.0: USB hub found
[    1.360187] hub 1-0:1.0: 2 ports detected
[    1.360374] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.360378] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.360390] ehci-pci 0000:00:1d.0: debug port 2
[    1.364304] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.364313] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe2d40000
[    1.380024] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.380059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.380061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.380062] usb usb2: Product: EHCI Host Controller
[    1.380064] usb usb2: Manufacturer: Linux 4.13.0-36-generic ehci_hcd
[    1.380066] usb usb2: SerialNumber: 0000:00:1d.0
[    1.380201] hub 2-0:1.0: USB hub found
[    1.380207] hub 2-0:1.0: 2 ports detected
[    1.380287] ehci-platform: EHCI generic platform driver
[    1.380299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.380301] ohci-pci: OHCI PCI platform driver
[    1.380310] ohci-platform: OHCI generic platform driver
[    1.380316] uhci_hcd: USB Universal Host Controller Interface driver
[    1.380370] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.380747] i8042: Warning: Keylock active
[    1.382081] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.382085] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.382276] mousedev: PS/2 mouse device common for all mice
[    1.382638] rtc_cmos 00:02: RTC can wake from S4
[    1.382794] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.382820] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.382833] i2c /dev entries driver
[    1.382882] device-mapper: uevent: version 1.0.3
[    1.382965] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.382970] intel_pstate: Intel P-state driver initializing
[    1.383142] ledtrig-cpu: registered to indicate activity on CPUs
[    1.383480] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.383618] NET: Registered protocol family 10
[    1.388048] Segment Routing with IPv6
[    1.388068] NET: Registered protocol family 17
[    1.388077] Key type dns_resolver registered
[    1.388362] RAS: Correctable Errors collector initialized.
[    1.388394] microcode: sig=0x206a7, pf=0x10, revision=0x23
[    1.388458] microcode: Microcode Update Driver: v2.2.
[    1.388545] sched_clock: Marking stable (1388453162, 0)->(1387773412, 679750)
[    1.388772] registered taskstats version 1
[    1.388781] Loading compiled-in X.509 certificates
[    1.391576] Loaded X.509 cert 'Build time autogenerated kernel key: 6392960b5d1a7feefef54e83c93c27dba99187fc'
[    1.391597] zswap: loaded using pool lzo/zbud
[    1.395193] Key type big_key registered
[    1.395197] Key type trusted registered
[    1.397000] Key type encrypted registered
[    1.397003] AppArmor: AppArmor sha1 policy hashing enabled
[    1.397007] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.397026] evm: HMAC attrs: 0x1
[    1.397300]   Magic number: 14:166:324
[    1.397331] tty tty49: hash matches
[    1.397359] acpi PNP0B00:00: hash matches
[    1.397418] rtc_cmos 00:02: setting system clock to 2018-04-26 09:18:55 UTC (1524734335)
[    1.397475] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.397475] EDD information not available.
[    1.397516] PM: Hibernation image not present or could not be loaded.
[    1.688106] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.708098] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.836928] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.836931] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.837391] hub 1-1:1.0: USB hub found
[    1.837606] hub 1-1:1.0: 6 ports detected
[    1.856883] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.856886] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.857288] hub 2-1:1.0: USB hub found
[    1.857500] hub 2-1:1.0: 8 ports detected
[    1.972158] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.972172] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.972185] ata2.01: link offline, clearing class 3 to NONE
[    1.974717] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A4SH, QD12, max UDMA/100
[    1.979567] ata2.00: configured for UDMA/100
[    2.012099] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[    2.012116] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[    2.124100] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[    2.144097] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[    2.237481] usb 1-1.4: New USB device found, idVendor=413c, idProduct=8187
[    2.237497] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.237499] usb 1-1.4: Product: DW375 Bluetooth Module
[    2.237501] usb 1-1.4: Manufacturer: Dell Computer Corp
[    2.237502] usb 1-1.4: SerialNumber: 9CB70D03A40B
[    2.255846] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c534
[    2.255849] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.255851] usb 2-1.1: Product: USB Receiver
[    2.255853] usb 2-1.1: Manufacturer: Logitech
[    2.336099] usb 2-1.8: new full-speed USB device number 4 using ehci-pci
[    2.467285] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5801
[    2.467288] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.467290] usb 2-1.8: Product: 5880
[    2.467292] usb 2-1.8: Manufacturer: Broadcom Corp
[    2.467293] usb 2-1.8: SerialNumber: 0123456789ABCD
[    2.467472] usb 2-1.8: config 0 descriptor??
[    2.536095] ata1.01: failed to resume link (SControl 0)
[    2.696157] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.696170] ata1.01: SATA link down (SStatus 4 SControl 0)
[    2.698810] ata1.00: ATA-9: KingDian S280 240GB, Q0526A, max UDMA/133
[    2.698813] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    2.699480] ata1.00: configured for UDMA/133
[    2.699862] scsi 0:0:0:0: Direct-Access     ATA      KingDian S280 24 6A   PQ: 0 ANSI: 5
[    2.700389] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.700563] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    2.700636] sd 0:0:0:0: [sda] Write Protect is off
[    2.700640] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.700784] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.702051]  sda: sda1 sda2 < sda5 >
[    2.702532] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.711403] scsi 1:0:0:0: CD-ROM            PLDS     DVD+-RW DU-8A4SH QD12 PQ: 0 ANSI: 5
[    2.751698] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.751699] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.751816] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.751884] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.755032] Freeing unused kernel memory: 2364K
[    2.755034] Write protecting the kernel read-only data: 18432k
[    2.755662] Freeing unused kernel memory: 2024K
[    2.755967] Freeing unused kernel memory: 88K
[    2.758459] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.758459] x86/mm: Checking user space page tables
[    2.760770] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.844482] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    2.846173] pps_core: LinuxPPS API ver. 1 registered
[    2.846175] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.848316] PTP clock support registered
[    2.857305] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    2.857307] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.857316] hidraw: raw HID events driver (C) Jiri Kosina
[    2.857600] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.872735] usbcore: registered new interface driver usbhid
[    2.872737] usbhid: USB HID core driver
[    2.904685] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C534.0001/input/input7
[    2.964282] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
[    2.964627] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C534.0002/input/input8
[    2.966753] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    3.024665] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
[    3.036381] clocksource: Switched to clocksource tsc
[    3.063846] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d4:be:d9:1b:5b:3a
[    3.063848] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    3.063891] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 4041FF-0FF
[    3.064496] [drm] Memory usable by graphics device = 2048M
[    3.064499] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[    3.064500] fb: switching to inteldrmfb from VESA VGA
[    3.064530] Console: switching to colour dummy device 80x25
[    3.064633] [drm] Replacing VGA console driver
[    3.066434] e1000e 0000:00:19.0 eno1: renamed from eth0
[    3.070160] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.070162] [drm] Driver supports precise vblank timestamp query.
[    3.072799] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.115547] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    3.124230] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    3.129601] acpi device:3a: registered as cooling_device4
[    3.129954] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    3.180726] fbcon: inteldrmfb (fb0) is primary device
[    3.180795] Console: switching to colour frame buffer device 170x48
[    3.180820] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.298514] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.395048] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.395228] systemd[1]: Detected architecture x86-64.
[    3.395424] systemd[1]: Set hostname to <vador>.
[    3.469349] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.469471] systemd[1]: Listening on udev Control Socket.
[    3.469486] systemd[1]: Reached target Encrypted Volumes.
[    3.469535] systemd[1]: Listening on Syslog Socket.
[    3.469547] systemd[1]: Reached target Remote File Systems (Pre).
[    3.469558] systemd[1]: Reached target User and Group Name Lookups.
[    3.469716] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.507397] lp: driver loaded but no devices found
[    3.512644] ppdev: user-space parallel port driver
[    3.519746] parport_pc 00:04: [io  0x0378-0x037b]
[    3.519895] parport_pc 00:04: [irq 5]
[    3.525041] parport_pc 00:04: activated
[    3.525047] parport_pc 00:04: reported by Plug and Play ACPI
[    3.615200] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    3.651413] systemd-journald[252]: Received request to flush runtime journal from PID 1
[    3.815282] audit: type=1400 audit(1524734337.917:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=467 comm="apparmor_parser"
[    3.815287] audit: type=1400 audit(1524734337.917:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=467 comm="apparmor_parser"
[    3.815290] audit: type=1400 audit(1524734337.917:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=467 comm="apparmor_parser"
[    3.815294] audit: type=1400 audit(1524734337.917:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=467 comm="apparmor_parser"
[    3.815297] audit: type=1400 audit(1524734337.917:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=467 comm="apparmor_parser"
[    3.815300] audit: type=1400 audit(1524734337.917:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=467 comm="apparmor_parser"
[    3.821028] audit: type=1400 audit(1524734337.923:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=464 comm="apparmor_parser"
[    3.821033] audit: type=1400 audit(1524734337.923:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=464 comm="apparmor_parser"
[    3.821194] audit: type=1400 audit(1524734337.923:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=465 comm="apparmor_parser"
[    3.924273] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.952189] Bluetooth: Core ver 2.22
[    3.952210] NET: Registered protocol family 31
[    3.952211] Bluetooth: HCI device and connection manager initialized
[    3.952215] Bluetooth: HCI socket layer initialized
[    3.952219] Bluetooth: L2CAP socket layer initialized
[    3.952225] Bluetooth: SCO socket layer initialized
[    3.971220] usbcore: registered new interface driver btusb
[    4.113690] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247)
[    4.113699] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.113702] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    4.113707] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.113708] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    4.113713] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.113714] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    4.113719] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.113720] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.122173] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    4.135592] dell_wmi: Detected Dell WMI interface version 1
[    4.135690] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
[    4.140216] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    4.140220] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    4.140221] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.140222] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    4.177261] Intel(R) Wireless WiFi driver for Linux
[    4.177263] Copyright(c) 2003- 2015 Intel Corporation
[    4.177582] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.195155] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    4.233853] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    4.233857] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    4.233858] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    4.233861] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    4.244397] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.262878] intel_rapl: Found RAPL domain package
[    4.262882] intel_rapl: Found RAPL domain core
[    4.262883] intel_rapl: Found RAPL domain uncore
[    4.262890] intel_rapl: RAPL package 0 domain package locked by BIOS
[    4.310192] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    4.357878] dell_laptop: Using i8042 filter function for receiving events
[    4.367362] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD90BXX: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
[    4.367366] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    4.367369] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    4.367371] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    4.367373] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    4.367376] snd_hda_codec_idt hdaudioC0D0:      Dock Mic=0xf
[    4.367379] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[    4.367382] snd_hda_codec_idt hdaudioC0D0:      Mic=0xa
[    4.373005] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input11
[    4.385679] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
[    4.563886] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    5.177653] Adding 4071420k swap on /dev/sda5.  Priority:-1 extents:1 across:4071420k SSFS
[    5.358087] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.358089] Bluetooth: BNEP filters: protocol multicast
[    5.358094] Bluetooth: BNEP socket layer initialized
[    5.439509] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    5.439595] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    5.439679] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    5.439759] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    5.439845] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    5.439922] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    5.444762] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    5.607423] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    5.620460] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[    5.920973] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[    6.014542] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    6.022605] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[    6.248184] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[    6.326038] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   10.335868] Bluetooth: RFCOMM TTY layer initialized
[   10.335876] Bluetooth: RFCOMM socket layer initialized
[   10.335883] Bluetooth: RFCOMM ver 1.11
[   12.643535] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[   12.647131] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[   12.651511] wlp2s0: authenticated
[   12.656020] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[   12.660773] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=1)
[   12.668167] wlp2s0: associated
[   12.668217] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   34.227438] random: crng init done
[  916.220466] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[  981.310331] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[  981.312711] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[  981.317916] wlp2s0: authenticated
[  981.320189] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[  981.325118] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=1)
[  981.332888] wlp2s0: associated
[ 1584.700783] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[ 1727.244429] wlp2s0: deauthenticating from bc:f2:af:d5:b7:52 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1730.491424] wlp2s0: authenticate with f4:ca:e5:c1:ee:a4
[ 1730.492789] wlp2s0: send auth to f4:ca:e5:c1:ee:a4 (try 1/3)
[ 1730.495270] wlp2s0: authenticated
[ 1730.497026] wlp2s0: associate with f4:ca:e5:c1:ee:a4 (try 1/3)
[ 1730.501113] wlp2s0: RX AssocResp from f4:ca:e5:c1:ee:a4 (capab=0x411 status=0 aid=2)
[ 1730.524605] wlp2s0: associated
[ 1734.503406] wlp2s0: deauthenticated from f4:ca:e5:c1:ee:a4 (Reason: 2=PREV_AUTH_NOT_VALID)
[ 1737.858469] wlp2s0: authenticate with f4:ca:e5:c1:ee:a4
[ 1737.859881] wlp2s0: send auth to f4:ca:e5:c1:ee:a4 (try 1/3)
[ 1737.862338] wlp2s0: authenticated
[ 1737.865191] wlp2s0: associate with f4:ca:e5:c1:ee:a4 (try 1/3)
[ 1737.869250] wlp2s0: RX AssocResp from f4:ca:e5:c1:ee:a4 (capab=0x411 status=0 aid=2)
[ 1737.894047] wlp2s0: associated
[ 1741.871277] wlp2s0: deauthenticated from f4:ca:e5:c1:ee:a4 (Reason: 2=PREV_AUTH_NOT_VALID)
[ 1742.502134] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1745.258616] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[ 1745.260157] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[ 1745.264448] wlp2s0: authenticated
[ 1745.265258] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[ 1745.271689] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=1)
[ 1745.279404] wlp2s0: associated
[ 1745.279466] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 2648.861634] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[ 2709.855248] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[ 2709.859135] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[ 2709.863559] wlp2s0: authenticated
[ 2709.867625] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[ 2709.872514] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=1)
[ 2709.879421] wlp2s0: associated
[ 3013.207644] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[ 3613.180532] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[ 4513.191266] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[ 5113.266824] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[ 6013.277862] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[ 6913.698602] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[ 7513.364688] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[ 8713.311029] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[ 9013.963472] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[10213.602691] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[11413.651864] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[11713.484915] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[12013.420348] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[12313.458232] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[12613.599576] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[12913.431838] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[13213.878726] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[13513.507119] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[13813.647337] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[15313.529315] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[15614.387344] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[15913.502477] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[16213.541252] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[17413.691998] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[17713.627455] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[22213.785630] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[22513.721065] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[23113.796801] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[23713.770175] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[24913.819215] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[25513.792701] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[26113.867624] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[26413.802676] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[27134.536771] perf: interrupt took too long (2543 > 2500), lowering kernel.perf_event_max_sample_rate to 78500
[29113.936682] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[29455.086845] perf: interrupt took too long (3180 > 3178), lowering kernel.perf_event_max_sample_rate to 62750
[29713.909574] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[30448.246763] perf: interrupt took too long (4036 > 3975), lowering kernel.perf_event_max_sample_rate to 49500
[30613.919871] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[30913.957441] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[31513.930140] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[31813.967791] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[32303.500165] perf: interrupt took too long (5099 > 5045), lowering kernel.perf_event_max_sample_rate to 39000
[33914.025241] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[34814.035206] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[35114.072614] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[35243.022140] pci_bus 0000:01: Allocating resources
[35243.022164] pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[35243.022172] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[35243.022179] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[35243.022195] pci_bus 0000:02: Allocating resources
[35243.022267] pcieport 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[35243.022274] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[35243.022288] pci_bus 0000:03: Allocating resources
[35243.022315] pci_bus 0000:09: Allocating resources
[35243.022343] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xcfa00000-0xcfbfffff]
[35243.022357] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xcfc00000-0xcfdfffff 64bit pref]
[35243.022368] pcieport 0000:00:1c.1: BAR 15: assigned [mem 0xcfe00000-0xcfffffff 64bit pref]
[35243.022378] pcieport 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
[35243.022386] pcieport 0000:00:1c.1: BAR 13: assigned [io  0x6000-0x6fff]
[35243.068458] wlp2s0: deauthenticating from bc:f2:af:d5:b7:52 by local choice (Reason: 3=DEAUTH_LEAVING)
[35253.603799] PM: Syncing filesystems ... done.
[35253.623483] PM: Preparing system for sleep (mem)
[35253.625787] Freezing user space processes ... (elapsed 0.001 seconds) done.
[35253.627527] OOM killer disabled.
[35253.627528] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[35253.628972] PM: Suspending system (mem)
[35253.629169] Suspending console(s) (use no_console_suspend to debug)
[35253.629631] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[35253.629761] sd 0:0:0:0: [sda] Stopping disk
[35253.647714] e1000e: EEE TX LPI TIMER: 00000011
[35253.950918] PM: suspend of devices complete after 321.516 msecs
[35253.971589] PM: late suspend of devices complete after 20.657 msecs
[35253.991543] PM: noirq suspend of devices complete after 19.945 msecs
[35253.992205] ACPI: Preparing to enter system sleep state S3
[35254.031810] ACPI: EC: event blocked
[35254.031812] ACPI: EC: EC stopped
[35254.031813] PM: Saving platform NVS memory
[35254.034503] Disabling non-boot CPUs ...
[35254.049267] smpboot: CPU 1 is now offline
[35254.068175] IRQ 17: no longer affine to CPU2
[35254.068185] IRQ 18: no longer affine to CPU2
[35254.068196] IRQ 25: no longer affine to CPU2
[35254.069909] smpboot: CPU 2 is now offline
[35254.092006] IRQ 1: no longer affine to CPU3
[35254.092013] IRQ 9: no longer affine to CPU3
[35254.092021] IRQ 12: no longer affine to CPU3
[35254.092033] IRQ 27: no longer affine to CPU3
[35254.093059] smpboot: CPU 3 is now offline
[35254.095370] ACPI: Low-level resume complete
[35254.095428] ACPI: EC: EC started
[35254.095429] PM: Restoring platform NVS memory
[35254.096166] Suspended for 355.634 seconds
[35254.096269] Enabling non-boot CPUs ...
[35254.096343] x86: Booting SMP configuration:
[35254.096345] smpboot: Booting Node 0 Processor 1 APIC 0x2
[35254.098984]  cache: parent cpu1 should not be sleeping
[35254.099599] CPU1 is up
[35254.099665] smpboot: Booting Node 0 Processor 2 APIC 0x1
[35254.102340]  cache: parent cpu2 should not be sleeping
[35254.103057] CPU2 is up
[35254.103118] smpboot: Booting Node 0 Processor 3 APIC 0x3
[35254.105709]  cache: parent cpu3 should not be sleeping
[35254.106983] CPU3 is up
[35254.112270] ACPI: Waking up from system sleep state S3
[35254.336572] PM: noirq resume of devices complete after 22.394 msecs
[35254.337651] PM: early resume of devices complete after 1.028 msecs
[35254.337895] ACPI: EC: event unblocked
[35254.339169] sd 0:0:0:0: [sda] Starting disk
[35254.598090] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[35254.602078] usb 2-1.1: reset full-speed USB device number 3 using ehci-pci
[35254.815112] PM: resume of devices complete after 477.452 msecs
[35254.815176] usb 1-1.4:1.0: rebind failed: -517
[35254.815180] usb 1-1.4:1.1: rebind failed: -517
[35254.815601] PM: Finishing wakeup.
[35254.815603] OOM killer enabled.
[35254.815604] Restarting tasks ... done.
[35254.918566] pci_bus 0000:01: Allocating resources
[35254.918593] pci_bus 0000:02: Allocating resources
[35254.918650] pci_bus 0000:03: Allocating resources
[35254.918672] pci_bus 0000:09: Allocating resources
[35255.091733] video LNXVIDEO:00: Restoring backlight state
[35255.130182] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[35255.130215] ata2.01: SATA link down (SStatus 0 SControl 300)
[35255.130235] ata2.01: link offline, clearing class 3 to NONE
[35255.138576] ata2.00: configured for UDMA/100
[35255.170901] ACPI: button: The lid device is not compliant to SW_LID.
[35255.176977] acpi PNP0401:00: Already enumerated
[35255.177624] acpi PNP0501:00: Still not present
[35255.694091] ata1.01: failed to resume link (SControl 0)
[35255.854111] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[35255.854125] ata1.01: SATA link down (SStatus 4 SControl 0)
[35255.857425] ata1.00: configured for UDMA/133
[35256.022445] e1000e: eno1 NIC Link is Down
[35256.023553] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[35256.036670] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[35256.339996] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[35256.427759] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[35256.433803] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[35256.658476] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[35256.737078] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[35263.073287] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[35263.075508] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[35263.079861] wlp2s0: authenticated
[35263.082112] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[35263.086898] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=1)
[35263.096026] wlp2s0: associated
[35263.096106] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[35566.439976] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[36220.187247] perf: interrupt took too long (6380 > 6373), lowering kernel.perf_event_max_sample_rate to 31250
[36466.450271] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[36766.487636] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[37066.422732] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[37366.153185] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[38866.240997] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[39166.275834] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[39466.314313] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[39766.248323] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[40605.365269] pci_bus 0000:01: Allocating resources
[40605.365313] pci_bus 0000:02: Allocating resources
[40605.365405] pci_bus 0000:03: Allocating resources
[40605.365442] pci_bus 0000:09: Allocating resources
[40605.409038] wlp2s0: deauthenticating from bc:f2:af:d5:b7:52 by local choice (Reason: 3=DEAUTH_LEAVING)
[40615.939669] PM: Syncing filesystems ... done.
[40615.953712] PM: Preparing system for sleep (mem)
[40615.954393] Freezing user space processes ... (elapsed 0.002 seconds) done.
[40615.956680] OOM killer disabled.
[40615.956682] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[40615.958205] PM: Suspending system (mem)
[40615.958424] Suspending console(s) (use no_console_suspend to debug)
[40615.958995] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[40615.959131] sd 0:0:0:0: [sda] Stopping disk
[40615.975768] e1000e: EEE TX LPI TIMER: 00000011
[40616.284779] PM: suspend of devices complete after 326.092 msecs
[40616.302358] PM: late suspend of devices complete after 17.559 msecs
[40616.322330] PM: noirq suspend of devices complete after 19.960 msecs
[40616.323019] ACPI: Preparing to enter system sleep state S3
[40616.362576] ACPI: EC: event blocked
[40616.362577] ACPI: EC: EC stopped
[40616.362579] PM: Saving platform NVS memory
[40616.365219] Disabling non-boot CPUs ...
[40616.380023] smpboot: CPU 1 is now offline
[40616.398934] IRQ 17: no longer affine to CPU2
[40616.398944] IRQ 18: no longer affine to CPU2
[40616.398955] IRQ 25: no longer affine to CPU2
[40616.400683] smpboot: CPU 2 is now offline
[40616.422777] IRQ 1: no longer affine to CPU3
[40616.422784] IRQ 9: no longer affine to CPU3
[40616.422792] IRQ 12: no longer affine to CPU3
[40616.422803] IRQ 27: no longer affine to CPU3
[40616.423827] smpboot: CPU 3 is now offline
[40616.425790] ACPI: Low-level resume complete
[40616.425840] ACPI: EC: EC started
[40616.425840] PM: Restoring platform NVS memory
[40616.426545] Suspended for 656.500 seconds
[40616.426618] Enabling non-boot CPUs ...
[40616.426665] x86: Booting SMP configuration:
[40616.426666] smpboot: Booting Node 0 Processor 1 APIC 0x2
[40616.429151]  cache: parent cpu1 should not be sleeping
[40616.429582] CPU1 is up
[40616.429644] smpboot: Booting Node 0 Processor 2 APIC 0x1
[40616.432188]  cache: parent cpu2 should not be sleeping
[40616.432719] CPU2 is up
[40616.432796] smpboot: Booting Node 0 Processor 3 APIC 0x3
[40616.435250]  cache: parent cpu3 should not be sleeping
[40616.436062] CPU3 is up
[40616.440830] ACPI: Waking up from system sleep state S3
[40616.646411] PM: noirq resume of devices complete after 21.850 msecs
[40616.647176] PM: early resume of devices complete after 0.726 msecs
[40616.647362] ACPI: EC: event unblocked
[40616.648215] sd 0:0:0:0: [sda] Starting disk
[40616.904490] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[40616.912520] usb 2-1.1: reset full-speed USB device number 3 using ehci-pci
[40617.436548] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[40617.436572] ata2.01: SATA link down (SStatus 0 SControl 300)
[40617.436592] ata2.01: link offline, clearing class 3 to NONE
[40617.443985] ata2.00: configured for UDMA/100
[40617.674828] PM: resume of devices complete after 1027.673 msecs
[40617.674967] usb 1-1.4:1.0: rebind failed: -517
[40617.674977] usb 1-1.4:1.1: rebind failed: -517
[40617.675347] PM: Finishing wakeup.
[40617.675350] OOM killer enabled.
[40617.675352] Restarting tasks ... done.
[40617.693065] pci_bus 0000:01: Allocating resources
[40617.693090] pci_bus 0000:02: Allocating resources
[40617.693164] pci_bus 0000:03: Allocating resources
[40617.693185] pci_bus 0000:09: Allocating resources
[40617.705324] acpi PNP0401:00: Already enumerated
[40617.724894] acpi PNP0501:00: Still not present
[40617.730234] video LNXVIDEO:00: Restoring backlight state
[40618.004551] ata1.01: failed to resume link (SControl 0)
[40618.164629] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[40618.164652] ata1.01: SATA link down (SStatus 4 SControl 0)
[40618.168281] ata1.00: configured for UDMA/133
[40618.293007] e1000e: eno1 NIC Link is Down
[40618.293980] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[40618.307094] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[40618.607376] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[40618.692497] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[40618.695214] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[40618.920859] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[40618.983150] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[40625.368457] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[40625.369781] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[40625.374071] wlp2s0: authenticated
[40625.376485] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[40625.381281] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=1)
[40625.393215] wlp2s0: associated
[40625.393344] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[41073.270690] kauditd_printk_skb: 20 callbacks suppressed
[41073.270692] audit: type=1400 audit(1524776418.841:31): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/var/lib/snapd/desktop/applications/mimeinfo.cache" pid=11199 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[41828.918638] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[41908.606675] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[41908.609094] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[41908.613492] wlp2s0: authenticated
[41908.613805] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[41908.618688] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=1)
[41908.625925] wlp2s0: associated
[42156.477523] pci_bus 0000:01: Allocating resources
[42156.477565] pci_bus 0000:02: Allocating resources
[42156.477654] pci_bus 0000:03: Allocating resources
[42156.477690] pci_bus 0000:09: Allocating resources
[42156.525961] wlp2s0: deauthenticating from bc:f2:af:d5:b7:52 by local choice (Reason: 3=DEAUTH_LEAVING)
[42167.049777] PM: Syncing filesystems ... done.
[42167.067182] PM: Preparing system for sleep (mem)
[42167.067587] Freezing user space processes ... (elapsed 0.002 seconds) done.
[42167.069879] OOM killer disabled.
[42167.069881] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[42167.071058] PM: Suspending system (mem)
[42167.071248] Suspending console(s) (use no_console_suspend to debug)
[42167.071744] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[42167.071847] sd 0:0:0:0: [sda] Stopping disk
[42167.087805] e1000e: EEE TX LPI TIMER: 00000011
[42167.388736] PM: suspend of devices complete after 317.249 msecs
[42167.407109] PM: late suspend of devices complete after 18.357 msecs
[42167.427090] PM: noirq suspend of devices complete after 19.965 msecs
[42167.427750] ACPI: Preparing to enter system sleep state S3
[42167.467311] ACPI: EC: event blocked
[42167.467312] ACPI: EC: EC stopped
[42167.467314] PM: Saving platform NVS memory
[42167.469977] Disabling non-boot CPUs ...
[42167.484762] smpboot: CPU 1 is now offline
[42167.507642] IRQ 17: no longer affine to CPU2
[42167.507652] IRQ 18: no longer affine to CPU2
[42167.507662] IRQ 25: no longer affine to CPU2
[42167.509400] smpboot: CPU 2 is now offline
[42167.531514] IRQ 1: no longer affine to CPU3
[42167.531522] IRQ 9: no longer affine to CPU3
[42167.531530] IRQ 12: no longer affine to CPU3
[42167.531541] IRQ 27: no longer affine to CPU3
[42167.532568] smpboot: CPU 3 is now offline
[42167.534801] ACPI: Low-level resume complete
[42167.534858] ACPI: EC: EC started
[42167.534859] PM: Restoring platform NVS memory
[42167.535604] Suspended for 72641.367 seconds
[42167.535683] Enabling non-boot CPUs ...
[42167.535738] x86: Booting SMP configuration:
[42167.535740] smpboot: Booting Node 0 Processor 1 APIC 0x2
[42167.538369]  cache: parent cpu1 should not be sleeping
[42167.538977] CPU1 is up
[42167.539039] smpboot: Booting Node 0 Processor 2 APIC 0x1
[42167.541716]  cache: parent cpu2 should not be sleeping
[42167.542407] CPU2 is up
[42167.542482] smpboot: Booting Node 0 Processor 3 APIC 0x3
[42167.545075]  cache: parent cpu3 should not be sleeping
[42167.546266] CPU3 is up
[42167.551574] ACPI: Waking up from system sleep state S3
[42167.776001] PM: noirq resume of devices complete after 22.320 msecs
[42167.777102] PM: early resume of devices complete after 1.049 msecs
[42167.777367] ACPI: EC: event unblocked
[42167.781338] sd 0:0:0:0: [sda] Starting disk
[42168.033623] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[42168.045589] usb 2-1.1: reset full-speed USB device number 3 using ehci-pci
[42168.255797] PM: resume of devices complete after 478.680 msecs
[42168.255863] usb 1-1.4:1.0: rebind failed: -517
[42168.255868] usb 1-1.4:1.1: rebind failed: -517
[42168.256279] PM: Finishing wakeup.
[42168.256282] OOM killer enabled.
[42168.256283] Restarting tasks ... done.
[42168.348027] pci_bus 0000:01: Allocating resources
[42168.348053] pci_bus 0000:02: Allocating resources
[42168.348128] pci_bus 0000:03: Allocating resources
[42168.348151] pci_bus 0000:09: Allocating resources
[42168.567512] video LNXVIDEO:00: Restoring backlight state
[42168.579859] acpi PNP0401:00: Already enumerated
[42168.581643] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[42168.581664] ata2.01: SATA link down (SStatus 0 SControl 300)
[42168.581682] ata2.01: link offline, clearing class 3 to NONE
[42168.581902] acpi PNP0501:00: Still not present
[42168.589611] ata2.00: configured for UDMA/100
[42169.145679] ata1.01: failed to resume link (SControl 0)
[42169.305764] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[42169.305792] ata1.01: SATA link down (SStatus 4 SControl 0)
[42169.309545] ata1.00: configured for UDMA/133
[42169.438148] e1000e: eno1 NIC Link is Down
[42169.439248] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[42169.452487] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[42169.757164] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[42169.848848] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[42169.853162] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[42170.078068] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[42170.140737] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[42176.553636] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[42176.555830] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[42176.560104] wlp2s0: authenticated
[42176.561688] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[42176.566561] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=3)
[42176.574055] wlp2s0: associated
[42176.574195] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[42283.750141] wlp2s0: deauthenticating from bc:f2:af:d5:b7:52 by local choice (Reason: 3=DEAUTH_LEAVING)
[42286.964667] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[42286.967227] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[42286.971486] wlp2s0: authenticated
[42286.975900] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[42286.980650] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=3)
[42286.989482] wlp2s0: associated
[42590.346315] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[42890.281675] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[43190.319310] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[43490.356968] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[43790.394320] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[45290.376651] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[45890.451502] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[46190.386505] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[46490.423902] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[47690.471334] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[47990.406417] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[48290.444018] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[48890.416955] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[50390.503143] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[50990.476134] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[51890.486939] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[52190.524738] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[52490.562495] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[52790.497804] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[53090.535529] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 2 (2442/0 MHz)
[53390.573285] wlp2s0: AP bc:f2:af:d5:b7:52 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
[56904.790569] pci_bus 0000:01: Allocating resources
[56904.790594] pci_bus 0000:02: Allocating resources
[56904.790668] pci_bus 0000:03: Allocating resources
[56904.790690] pci_bus 0000:09: Allocating resources
[56904.824627] wlp2s0: deauthenticating from bc:f2:af:d5:b7:52 by local choice (Reason: 3=DEAUTH_LEAVING)
[56915.370218] PM: Syncing filesystems ... done.
[56915.378514] PM: Preparing system for sleep (mem)
[56915.379251] Freezing user space processes ... (elapsed 0.002 seconds) done.
[56915.381417] OOM killer disabled.
[56915.381418] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[56915.382745] PM: Suspending system (mem)
[56915.382887] Suspending console(s) (use no_console_suspend to debug)
[56915.383202] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[56915.383321] sd 0:0:0:0: [sda] Stopping disk
[56915.398217] e1000e: EEE TX LPI TIMER: 00000011
[56915.729132] PM: suspend of devices complete after 346.077 msecs
[56915.749654] PM: late suspend of devices complete after 20.508 msecs
[56915.769699] PM: noirq suspend of devices complete after 20.036 msecs
[56915.770362] ACPI: Preparing to enter system sleep state S3
[56915.814021] ACPI: EC: event blocked
[56915.814023] ACPI: EC: EC stopped
[56915.814024] PM: Saving platform NVS memory
[56915.817314] Disabling non-boot CPUs ...
[56915.831556] smpboot: CPU 1 is now offline
[56915.854427] IRQ 17: no longer affine to CPU2
[56915.854438] IRQ 18: no longer affine to CPU2
[56915.854450] IRQ 27: no longer affine to CPU2
[56915.856207] smpboot: CPU 2 is now offline
[56915.878244] IRQ 1: no longer affine to CPU3
[56915.878252] IRQ 9: no longer affine to CPU3
[56915.878260] IRQ 12: no longer affine to CPU3
[56915.878271] IRQ 25: no longer affine to CPU3
[56915.879308] smpboot: CPU 3 is now offline
[56915.881685] ACPI: Low-level resume complete
[56915.881742] ACPI: EC: EC started
[56915.881743] PM: Restoring platform NVS memory
[56915.882499] Suspended for 29098.652 seconds
[56915.882577] Enabling non-boot CPUs ...
[56915.882631] x86: Booting SMP configuration:
[56915.882632] smpboot: Booting Node 0 Processor 1 APIC 0x2
[56915.885259]  cache: parent cpu1 should not be sleeping
[56915.885868] CPU1 is up
[56915.885931] smpboot: Booting Node 0 Processor 2 APIC 0x1
[56915.888597]  cache: parent cpu2 should not be sleeping
[56915.889285] CPU2 is up
[56915.889357] smpboot: Booting Node 0 Processor 3 APIC 0x3
[56915.891946]  cache: parent cpu3 should not be sleeping
[56915.893123] CPU3 is up
[56915.898400] ACPI: Waking up from system sleep state S3
[56916.122607] PM: noirq resume of devices complete after 22.279 msecs
[56916.123687] PM: early resume of devices complete after 1.029 msecs
[56916.123935] ACPI: EC: event unblocked
[56916.125108] sd 0:0:0:0: [sda] Starting disk
[56916.384283] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[56916.392244] usb 2-1.1: reset full-speed USB device number 3 using ehci-pci
[56916.598333] PM: resume of devices complete after 474.633 msecs
[56916.598398] usb 1-1.4:1.0: rebind failed: -517
[56916.598401] usb 1-1.4:1.1: rebind failed: -517
[56916.598779] PM: Finishing wakeup.
[56916.598781] OOM killer enabled.
[56916.598782] Restarting tasks ... done.
[56916.712580] pci_bus 0000:01: Allocating resources
[56916.712608] pci_bus 0000:02: Allocating resources
[56916.712668] pci_bus 0000:03: Allocating resources
[56916.712693] pci_bus 0000:09: Allocating resources
[56916.885094] acpi PNP0401:00: Already enumerated
[56916.895311] acpi PNP0501:00: Still not present
[56916.905958] video LNXVIDEO:00: Restoring backlight state
[56916.920288] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[56916.920306] ata2.01: SATA link down (SStatus 0 SControl 300)
[56916.920320] ata2.01: link offline, clearing class 3 to NONE
[56916.927454] ata2.00: configured for UDMA/100
[56917.484325] ata1.01: failed to resume link (SControl 0)
[56917.644398] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[56917.644425] ata1.01: SATA link down (SStatus 4 SControl 0)
[56917.648107] ata1.00: configured for UDMA/133
[56917.796286] e1000e: eno1 NIC Link is Down
[56917.797622] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[56917.810046] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[56918.111721] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[56918.195732] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[56918.199453] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[56918.424706] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[56918.489587] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[56924.870302] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[56924.871627] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[56924.875925] wlp2s0: authenticated
[56924.876296] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[56924.881081] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=1)
[56924.890054] wlp2s0: associated
[56924.890121] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[57527.215652] wlp2s0: deauthenticating from bc:f2:af:d5:b7:52 by local choice (Reason: 3=DEAUTH_LEAVING)
[57537.757182] PM: Syncing filesystems ... done.
[57537.850355] PM: Preparing system for sleep (mem)
[57537.850735] Freezing user space processes ... (elapsed 0.001 seconds) done.
[57537.852682] OOM killer disabled.
[57537.852684] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[57537.854008] PM: Suspending system (mem)
[57537.854165] Suspending console(s) (use no_console_suspend to debug)
[57537.854553] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[57537.854682] sd 0:0:0:0: [sda] Stopping disk
[57537.869454] e1000e: EEE TX LPI TIMER: 00000011
[57537.965530] PM: suspend of devices complete after 111.181 msecs
[57537.983635] PM: late suspend of devices complete after 18.094 msecs
[57538.003725] PM: noirq suspend of devices complete after 20.079 msecs
[57538.004386] ACPI: Preparing to enter system sleep state S3
[57538.043989] ACPI: EC: event blocked
[57538.043991] ACPI: EC: EC stopped
[57538.043992] PM: Saving platform NVS memory
[57538.046634] Disabling non-boot CPUs ...
[57538.061426] smpboot: CPU 1 is now offline
[57538.080345] IRQ 18: no longer affine to CPU2
[57538.080357] IRQ 25: no longer affine to CPU2
[57538.082076] smpboot: CPU 2 is now offline
[57538.104184] IRQ 1: no longer affine to CPU3
[57538.104192] IRQ 9: no longer affine to CPU3
[57538.104200] IRQ 12: no longer affine to CPU3
[57538.104208] IRQ 17: no longer affine to CPU3
[57538.104218] IRQ 27: no longer affine to CPU3
[57538.105248] smpboot: CPU 3 is now offline
[57538.107184] ACPI: Low-level resume complete
[57538.107234] ACPI: EC: EC started
[57538.107235] PM: Restoring platform NVS memory
[57538.107940] Suspended for 1508.784 seconds
[57538.108003] Enabling non-boot CPUs ...
[57538.108050] x86: Booting SMP configuration:
[57538.108051] smpboot: Booting Node 0 Processor 1 APIC 0x2
[57538.110533]  cache: parent cpu1 should not be sleeping
[57538.110961] CPU1 is up
[57538.111030] smpboot: Booting Node 0 Processor 2 APIC 0x1
[57538.113554]  cache: parent cpu2 should not be sleeping
[57538.114067] CPU2 is up
[57538.114141] smpboot: Booting Node 0 Processor 3 APIC 0x3
[57538.116597]  cache: parent cpu3 should not be sleeping
[57538.117407] CPU3 is up
[57538.122158] ACPI: Waking up from system sleep state S3
[57538.335825] PM: noirq resume of devices complete after 21.126 msecs
[57538.336595] PM: early resume of devices complete after 0.731 msecs
[57538.336787] ACPI: EC: event unblocked
[57538.337556] sd 0:0:0:0: [sda] Starting disk
[57538.593973] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[57538.601964] usb 2-1.1: reset full-speed USB device number 3 using ehci-pci
[57538.803515] PM: resume of devices complete after 466.910 msecs
[57538.803574] usb 1-1.4:1.0: rebind failed: -517
[57538.803578] usb 1-1.4:1.1: rebind failed: -517
[57538.803789] PM: Finishing wakeup.
[57538.803791] OOM killer enabled.
[57538.803792] Restarting tasks ... done.
[57538.919506] pci_bus 0000:01: Allocating resources
[57538.919533] pci_bus 0000:02: Allocating resources
[57538.919593] pci_bus 0000:03: Allocating resources
[57538.919615] pci_bus 0000:09: Allocating resources
[57539.087806] acpi PNP0401:00: Already enumerated
[57539.095646] acpi PNP0501:00: Still not present
[57539.111704] video LNXVIDEO:00: Restoring backlight state
[57539.130876] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[57539.130892] ata2.01: SATA link down (SStatus 0 SControl 300)
[57539.130906] ata2.01: link offline, clearing class 3 to NONE
[57539.138070] ata2.00: configured for UDMA/100
[57539.693900] ata1.01: failed to resume link (SControl 0)
[57539.853965] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[57539.853980] ata1.01: SATA link down (SStatus 4 SControl 0)
[57539.857091] ata1.00: configured for UDMA/133
[57539.992427] e1000e: eno1 NIC Link is Down
[57539.995489] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[57540.008567] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[57540.307631] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[57540.391124] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[57540.392904] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[57540.622095] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[57540.689203] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[57547.024186] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[57547.025274] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[57547.029571] wlp2s0: authenticated
[57547.029998] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[57547.034872] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=1)
[57547.042338] wlp2s0: associated
[57547.042414] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[57693.301372] pci_bus 0000:01: Allocating resources
[57693.301415] pci_bus 0000:02: Allocating resources
[57693.301505] pci_bus 0000:03: Allocating resources
[57693.301544] pci_bus 0000:09: Allocating resources
[57693.345556] wlp2s0: deauthenticating from bc:f2:af:d5:b7:52 by local choice (Reason: 3=DEAUTH_LEAVING)
[57703.836281] PM: Syncing filesystems ... done.
[57703.846907] PM: Preparing system for sleep (mem)
[57703.847400] Freezing user space processes ... (elapsed 0.002 seconds) done.
[57703.849523] OOM killer disabled.
[57703.849524] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[57703.850821] PM: Suspending system (mem)
[57703.850923] Suspending console(s) (use no_console_suspend to debug)
[57703.851216] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[57703.851385] sd 0:0:0:0: [sda] Stopping disk
[57703.866832] e1000e: EEE TX LPI TIMER: 00000011
[57703.957817] PM: suspend of devices complete after 106.757 msecs
[57703.975961] PM: late suspend of devices complete after 18.133 msecs
[57703.995978] PM: noirq suspend of devices complete after 20.005 msecs
[57703.996641] ACPI: Preparing to enter system sleep state S3
[57704.036233] ACPI: EC: event blocked
[57704.036235] ACPI: EC: EC stopped
[57704.036236] PM: Saving platform NVS memory
[57704.038884] Disabling non-boot CPUs ...
[57704.053691] smpboot: CPU 1 is now offline
[57704.076588] IRQ 18: no longer affine to CPU2
[57704.076600] IRQ 25: no longer affine to CPU2
[57704.078333] smpboot: CPU 2 is now offline
[57704.100427] IRQ 1: no longer affine to CPU3
[57704.100435] IRQ 9: no longer affine to CPU3
[57704.100444] IRQ 12: no longer affine to CPU3
[57704.100453] IRQ 17: no longer affine to CPU3
[57704.100463] IRQ 27: no longer affine to CPU3
[57704.101491] smpboot: CPU 3 is now offline
[57704.103454] ACPI: Low-level resume complete
[57704.103505] ACPI: EC: EC started
[57704.103505] PM: Restoring platform NVS memory
[57704.104202] Suspended for 145.007 seconds
[57704.104268] Enabling non-boot CPUs ...
[57704.104315] x86: Booting SMP configuration:
[57704.104316] smpboot: Booting Node 0 Processor 1 APIC 0x2
[57704.106825]  cache: parent cpu1 should not be sleeping
[57704.107254] CPU1 is up
[57704.107324] smpboot: Booting Node 0 Processor 2 APIC 0x1
[57704.109848]  cache: parent cpu2 should not be sleeping
[57704.110462] CPU2 is up
[57704.110538] smpboot: Booting Node 0 Processor 3 APIC 0x3
[57704.113012]  cache: parent cpu3 should not be sleeping
[57704.113830] CPU3 is up
[57704.118613] ACPI: Waking up from system sleep state S3
[57704.324108] PM: noirq resume of devices complete after 21.864 msecs
[57704.324779] PM: early resume of devices complete after 0.637 msecs
[57704.324961] ACPI: EC: event unblocked
[57704.325655] sd 0:0:0:0: [sda] Starting disk
[57704.582201] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[57704.590146] usb 2-1.1: reset full-speed USB device number 3 using ehci-pci
[57704.784477] PM: resume of devices complete after 459.688 msecs
[57704.784531] usb 1-1.4:1.0: rebind failed: -517
[57704.784533] usb 1-1.4:1.1: rebind failed: -517
[57704.784660] PM: Finishing wakeup.
[57704.784661] OOM killer enabled.
[57704.784662] Restarting tasks ... done.
[57705.084311] video LNXVIDEO:00: Restoring backlight state
[57705.090276] pci_bus 0000:01: Allocating resources
[57705.090304] pci_bus 0000:02: Allocating resources
[57705.090384] pci_bus 0000:03: Allocating resources
[57705.090410] pci_bus 0000:09: Allocating resources
[57705.092254] acpi PNP0401:00: Already enumerated
[57705.092746] acpi PNP0501:00: Still not present
[57705.114316] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[57705.114335] ata2.01: SATA link down (SStatus 0 SControl 300)
[57705.114352] ata2.01: link offline, clearing class 3 to NONE
[57705.121646] ata2.00: configured for UDMA/100
[57705.678180] ata1.01: failed to resume link (SControl 0)
[57705.838225] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[57705.838240] ata1.01: SATA link down (SStatus 4 SControl 0)
[57705.841725] ata1.00: configured for UDMA/133
[57705.966520] e1000e: eno1 NIC Link is Down
[57705.967477] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[57705.980587] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[57706.281105] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[57706.365538] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[57706.368774] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[57706.594571] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[57706.665602] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[57713.026875] wlp2s0: authenticate with bc:f2:af:d5:b7:52
[57713.029617] wlp2s0: send auth to bc:f2:af:d5:b7:52 (try 1/3)
[57713.033911] wlp2s0: authenticated
[57713.038275] wlp2s0: associate with bc:f2:af:d5:b7:52 (try 1/3)
[57713.044273] wlp2s0: RX AssocResp from bc:f2:af:d5:b7:52 (capab=0x411 status=0 aid=1)
[57713.052092] wlp2s0: associated
[57713.052165] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready

j'ai fait

sudo apt-get install --yes exfat-utils exfat-fuse

proposé par ek0892

je vais redémarrer pour voir ce qui se passe, à tout de suite

bcd16 · Le 28/04/2018, à 08:03

ça n'a rien changé.

Sans la carte j'ai :

:~$ sudo fdisk -l
Disque /dev/loop0 : 86,6 MiB, 90759168 octets, 177264 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disque /dev/loop1 : 180,5 MiB, 189272064 octets, 369672 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disque /dev/sda : 223,6 GiB, 240057409536 octets, 468862128 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xa64593d3

Périphérique Amorçage     Start       Fin  Secteurs   Size Id Type
/dev/sda1    *             2048 460716031 460713984 219,7G 83 Linux
/dev/sda2             460718078 468860927   8142850   3,9G  5 Étendue
/dev/sda5             460718080 468860927   8142848   3,9G 82 partition d'échange Linux / Solaris

avec la carte :

:~$ sudo fdisk -l
Disque /dev/loop0 : 86,6 MiB, 90759168 octets, 177264 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disque /dev/loop1 : 180,5 MiB, 189272064 octets, 369672 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disque /dev/sda : 223,6 GiB, 240057409536 octets, 468862128 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xa64593d3

Périphérique Amorçage     Start       Fin  Secteurs   Size Id Type
/dev/sda1    *             2048 460716031 460713984 219,7G 83 Linux
/dev/sda2             460718078 468860927   8142850   3,9G  5 Étendue
/dev/sda5             460718080 468860927   8142848   3,9G 82 partition d'échange Linux / Solaris

bcd16 · Le 28/04/2018, à 08:23

Ça y est, j'ai trouvé !

Je suis allée dans le bios (voir corsendonk)
Miscellaneous Devices
Je suis passée de "Disable MC, 1394" à "Media Card and 1394"
et ça marche !

Salut à tous

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 26/04/2018, à 11:13

[Résolu] Carte SD sur Dell Latitude E6520

#2 Le 28/04/2018, à 07:40

Re : [Résolu] Carte SD sur Dell Latitude E6520

#3 Le 28/04/2018, à 08:03

Re : [Résolu] Carte SD sur Dell Latitude E6520

#4 Le 28/04/2018, à 08:23

Re : [Résolu] Carte SD sur Dell Latitude E6520

Pied de page des forums