#1 Le 31/07/2018, à 16:56
- zyghot
Mise à niveau Ubuntu 18.04 (résolu)
Bonjour… et bonnes vacances à ceux qui en ont !
Je viens de mettre à niveau ubuntu de 16.04 vers 18.04.
Le démarrage est laborieux (voir ci-dessous) et l'arrêt de l'ordinateur est impossible, je dois appuyer plusieurs seconde sur le bouton de démarrage.
Voici l'écran quelques minutes après le démarrage (pris en photo puis retranscrit)
[0.000000] do-IRQ : 0.55 No irq handler for vector
WARNING : Failed to connect to Ivmetad. Falling back to device scanning.
[3.980042] sd 2:0:0:0 [sdb] No Caching mode page found
[3.980060] sd 2:0:0:0 [sdb] Assuming drive cache : write through
[3.985037] scsi 2:0:0:1 : Wrong diagnostic page ; asked for 1 got 8
[3.985055] scsi 2:0:0:1 : Failed to get diagnostic page 0x1
[3.985062] scsi 2:0:0:1 : Failed to bind enclosure -19
[46.412521] print-req-error : I/O error, dev fd0, sector 0
[59.341051] print-req-error : I/O error, dev fd0, sector 0
[71.700732] print-req-error : I/O error, dev fd0, sector 0
[84.048595] print-req-error : I/O error, dev fd0, sector 0
« + 8 lignes idem »
Gave up waiting for suspend/resume device
9dev/mapper/ubuntu--vg-root : clean, 487838/29982720 files, 91155904/119906304 blocks
[ok] Started Moritoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ok] Reached target local File systems (Pre).
Mounting Mount unit for gtk-common-themes, revision 319…
Mounting Mount unit for gnome-logs, revision 37…
Mounting Mount unit for skype, revision 45…
Mounting Mount unit for sweethome3d-homedesign, revision 3…
Mounting Mount unit for gnome-characters, revision 103…
Mounting Mount unit for sudoku-game, revision 1…
Mounting Mount unit for gnome-3-26-1604, revision 70…
Mounting Mount unit for gnome-system-monitor, revision 51…
Mounting Mount unit for core, revision 4917…
Mounting Mount unit for gnome-calculator, revision 180.
[ok] Mounted Mount unit for gtk-common-themes, revision 319.
[ok] Mounted Mount unit for gnome-logs, revision 37.
[ok] Mounted Mount unit for skype, revision 45.
[ok] Mounted Mount unit for sweethome3d-homedesign, revision 3.
[ok] Mounted Mount unit for gnome-characters, revision 103.
[ok] Mounted Mount unit for sudoku-game, revision 1.
[ok] Mounted Mount unit for gnome-3-26-1604, revision 70.
[ok] Mounted Mount unit for gnome-system-monitor, revision 51.
[ok] Mounted Mount unit for core, revision 4917.
[ok] Mounted Mount unit for gnome-calculator, revision 180.
[ok] Started Flush Journal to persitent Storage.
[ok] Started udev Kernel Device Manager.
Starting Show Plymouth Boot Screen…Merci pour votre aide.
Dernière modification par zyghot (Le 05/11/2018, à 15:27)
Hors ligne
#2 Le 31/07/2018, à 16:58
- xubu1957
Re : Mise à niveau Ubuntu 18.04 (résolu)
Bonjour,
Pour ajouter toi-même les balises code à ton précédent message #1 : Merci 
Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message
comme indiqué dans le : Retour utilisable de commande
Dernière modification par xubu1957 (Le 31/07/2018, à 21:40)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#3 Le 31/07/2018, à 17:01
- nam1962
Re : Mise à niveau Ubuntu 18.04 (résolu)
Ouf ! Tu as été scrupuleux !
Peux tu mettre le retour entre balises code ? https://forum.ubuntu-fr.org/viewtopic.php?id=1614731
Ensuite on va un peu regarder, donne les retours de :
cat /etc/apt/sources.list
ls /etc/apt/sources.list.d -1
dmesg
systemd-analyze blame
df -Th[ Modéré ]
Hors ligne
#4 Le 31/07/2018, à 17:37
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
dan@dlm:~$ cat /etc/apt/sources.list
# deb cdrom:[Ubuntu 16.04 LTS _Xenial Xerus_ - Release amd64 (20160420.1)]/ xenial main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ bionic main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## universe WILL NOT receive any review or updates from the Ubuntu security
## team.
deb http://fr.archive.ubuntu.com/ubuntu/ bionic universe
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial universe
deb http://fr.archive.ubuntu.com/ubuntu/ bionic-updates universe
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ bionic multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ bionic-updates multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
deb http://archive.canonical.com/ubuntu bionic partner
deb-src http://archive.canonical.com/ubuntu bionic partner
deb http://security.ubuntu.com/ubuntu bionic-security main restricted
# deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted
deb http://security.ubuntu.com/ubuntu bionic-security universe
# deb-src http://security.ubuntu.com/ubuntu xenial-security universe
deb http://security.ubuntu.com/ubuntu bionic-security multiverse
# deb-src http://security.ubuntu.com/ubuntu xenial-security multiverse
## http://blognux.free.fr/debian unstable main
dan@dlm:~$ Hors ligne
#5 Le 31/07/2018, à 17:37
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
dan@dlm:~$ ls /etc/apt/sources.list.d -1
clipgrab-team-ubuntu-ppa-xenial.list
clipgrab-team-ubuntu-ppa-xenial.list.distUpgrade
clipgrab-team-ubuntu-ppa-xenial.list.save
google-chrome.list
google-chrome.list.distUpgrade
google-chrome.list.save
michael-gruz-ubuntu-canon-stable-xenial.list
michael-gruz-ubuntu-canon-stable-xenial.list.distUpgrade
michael-gruz-ubuntu-canon-stable-xenial.list.save
opera-stable.list
opera-stable.list.distUpgrade
opera-stable.list.save
skype-stable.list
skype-stable.list.distUpgrade
skype-stable.list.save
xenial-partner.list
xenial-partner.list.distUpgrade
xenial-partner.list.save
dan@dlm:~$ Hors ligne
#6 Le 31/07/2018, à 17:39
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
dan@dlm:~$ dmesg
[ 0.000000] Linux version 4.15.0-29-generic (buildd@lgw01-amd64-057) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #31-Ubuntu SMP Tue Jul 17 15:39:52 UTC 2018 (Ubuntu 4.15.0-29.31-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.15.0-29-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e3000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dff90000-0x00000000dff9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dff9e000-0x00000000dffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dffe0000-0x00000000dffedfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/M3N78-VM, BIOS 1309 09/11/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000220000000 aka 8704M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x12753f000, 0x12753ffff] PGTABLE
[ 0.000000] BRK [0x127540000, 0x127540fff] PGTABLE
[ 0.000000] BRK [0x127541000, 0x127541fff] PGTABLE
[ 0.000000] BRK [0x127542000, 0x127542fff] PGTABLE
[ 0.000000] BRK [0x127543000, 0x127543fff] PGTABLE
[ 0.000000] BRK [0x127544000, 0x127544fff] PGTABLE
[ 0.000000] BRK [0x127545000, 0x127545fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31527000-0x34a8afff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB570 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x00000000DFF90000 000044 (v01 091109 RSDT1140 20090911 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000DFF90200 000084 (v01 091109 FACP1140 20090911 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000DFF90450 00AEB3 (v01 A1041 A1041000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 0x00000000DFF9E000 000040
[ 0.000000] ACPI: APIC 0x00000000DFF90390 000080 (v01 091109 APIC1140 20090911 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000DFF90410 00003C (v01 091109 OEMMCFG 20090911 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000DFF9E040 000072 (v01 091109 OEMB1140 20090911 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DFF9B310 000038 (v01 091109 OEMHPET0 20090911 MSFT 00000097)
[ 0.000000] ACPI: INFO 0x00000000DFF9E0C0 000124 (v01 091109 AMDINFO 20090911 MSFT 00000097)
[ 0.000000] ACPI: NVHD 0x00000000DFF9E1F0 000284 (v01 091109 NVHDCP 20090911 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000DFF9B350 000458 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21ffd5000-0x21fffffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dff8ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
[ 0.000000] On node 0 totalpages: 2096941
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14271 pages used for memmap
[ 0.000000] DMA32 zone: 913296 pages, LIFO batch:31
[ 0.000000] Normal zone: 18432 pages used for memmap
[ 0.000000] Normal zone: 1179648 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdff90000-0xdff9dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdff9e000-0xdffdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdffe0000-0xdffedfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdffee000-0xdffeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfff0000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2064153
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-29-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x74000000-0x75ffffff] (32MB)
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[ 0.000000] Memory: 8041532K/8387764K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 346232K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 39092 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.000000] do_IRQ: 0.55 No irq handler for vector
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 3000.039 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.07 BogoMIPS (lpj=12000156)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.030155] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.031467] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.031527] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.031569] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.031802] CPU: Physical Processor ID: 0
[ 0.031803] CPU: Processor Core ID: 0
[ 0.031804] mce: CPU supports 6 MCE banks
[ 0.031811] LVT offset 0 assigned for vector 0xf9
[ 0.031815] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.031816] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.031817] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.031818] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.032704] Freeing SMP alternatives memory: 36K
[ 0.036000] smpboot: CPU0: AMD Athlon(tm) II X2 250 Processor (family: 0x10, model: 0x6, stepping: 0x2)
[ 0.036000] Performance Events: AMD PMU driver.
[ 0.036000] ... version: 0
[ 0.036000] ... bit width: 48
[ 0.036000] ... generic registers: 4
[ 0.036000] ... value mask: 0000ffffffffffff
[ 0.036000] ... max period: 00007fffffffffff
[ 0.036000] ... fixed-purpose events: 0
[ 0.036000] ... event mask: 000000000000000f
[ 0.036000] Hierarchical SRCU implementation.
[ 0.036000] smp: Bringing up secondary CPUs ...
[ 0.036000] x86: Booting SMP configuration:
[ 0.036000] .... node #0, CPUs: #1
[ 0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.036000] smp: Brought up 1 node, 2 CPUs
[ 0.036000] smpboot: Max logical packages: 2
[ 0.036000] smpboot: Total of 2 processors activated (12000.15 BogoMIPS)
[ 0.036053] devtmpfs: initialized
[ 0.036091] x86/mm: Memory block size: 128MB
[ 0.036804] evm: security.selinux
[ 0.036804] evm: security.SMACK64
[ 0.036805] evm: security.SMACK64EXEC
[ 0.036805] evm: security.SMACK64TRANSMUTE
[ 0.036805] evm: security.SMACK64MMAP
[ 0.036806] evm: security.apparmor
[ 0.036806] evm: security.ima
[ 0.036807] evm: security.capability
[ 0.036878] PM: Registering ACPI NVS region [mem 0xdff9e000-0xdffdffff] (270336 bytes)
[ 0.036878] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.036878] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.036878] pinctrl core: initialized pinctrl subsystem
[ 0.036878] RTC time: 0:02:24, date: 01/01/02
[ 0.036878] NET: Registered protocol family 16
[ 0.036878] audit: initializing netlink subsys (disabled)
[ 0.036878] audit: type=2000 audit(1009843344.036:1): state=initialized audit_enabled=0 res=1
[ 0.036878] cpuidle: using governor ladder
[ 0.036878] cpuidle: using governor menu
[ 0.036878] node 0 link 0: io port [5000, ffffff]
[ 0.036878] node 0 link 0: io port [1000, 1fff]
[ 0.036878] TOM: 00000000e0000000 aka 3584M
[ 0.036878] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.036878] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.036878] node 0 link 0: mmio [a0000, bffff]
[ 0.036878] node 0 link 0: mmio [e0000000, fe0bffff] ==> [f0000000, fe0bffff]
[ 0.036878] TOM2: 0000000220000000 aka 8704M
[ 0.036878] bus: [bus 00-07] on node 0 link 0
[ 0.036878] bus: 00 [io 0x2000-0xffff]
[ 0.036878] bus: 00 [io 0x0000-0x1fff]
[ 0.036878] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.036878] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.036878] bus: 00 [mem 0x220000000-0xfcffffffff]
[ 0.036878] ACPI: bus type PCI registered
[ 0.036878] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.036878] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.036878] PCI: not using MMCONFIG
[ 0.036878] PCI: Using configuration type 1 for base access
[ 0.036878] PCI: Using configuration type 1 for extended access
[ 0.036878] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.036878] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.036878] mtrr: probably your BIOS does not setup all CPUs.
[ 0.036878] mtrr: corrected configuration.
[ 0.037191] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.037191] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.037191] ACPI: Added _OSI(Module Device)
[ 0.037191] ACPI: Added _OSI(Processor Device)
[ 0.037191] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.037191] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.037191] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.040008] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.044135] ACPI: Interpreter enabled
[ 0.044156] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.044158] ACPI: Using IOAPIC for interrupt routing
[ 0.044190] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.048007] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.048007] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.048007] ACPI: Enabled 12 GPEs in block 00 to 1F
[ 0.063815] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.063822] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.064074] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
[ 0.064194] acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.064196] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.064198] acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
[ 0.064199] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.064556] PCI host bridge to bus 0000:00
[ 0.064558] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.064560] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.064561] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.064563] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.064564] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed44fff window]
[ 0.064565] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.064589] pci 0000:00:00.0: [10de:0754] type 00 class 0x050000
[ 0.064882] pci 0000:00:01.0: [10de:075c] type 00 class 0x060100
[ 0.064891] pci 0000:00:01.0: reg 0x10: [io 0x0900-0x09ff]
[ 0.064995] pci 0000:00:01.1: [10de:0752] type 00 class 0x0c0500
[ 0.065006] pci 0000:00:01.1: reg 0x10: [io 0x0e00-0x0e3f]
[ 0.065021] pci 0000:00:01.1: reg 0x20: [io 0x0600-0x063f]
[ 0.065025] pci 0000:00:01.1: reg 0x24: [io 0x0700-0x073f]
[ 0.065052] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.065134] pci 0000:00:01.2: [10de:0751] type 00 class 0x050000
[ 0.065238] pci 0000:00:01.3: [10de:0753] type 00 class 0x0b4000
[ 0.065262] pci 0000:00:01.3: reg 0x10: [mem 0xfce80000-0xfcefffff]
[ 0.065435] pci 0000:00:01.4: [10de:0568] type 00 class 0x050000
[ 0.065561] pci 0000:00:02.0: [10de:077b] type 00 class 0x0c0310
[ 0.065571] pci 0000:00:02.0: reg 0x10: [mem 0xfce7e000-0xfce7efff]
[ 0.065605] pci 0000:00:02.0: supports D1 D2
[ 0.065607] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065686] pci 0000:00:02.1: [10de:077c] type 00 class 0x0c0320
[ 0.065696] pci 0000:00:02.1: reg 0x10: [mem 0xfce7fc00-0xfce7fcff]
[ 0.065735] pci 0000:00:02.1: supports D1 D2
[ 0.065737] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065820] pci 0000:00:04.0: [10de:077d] type 00 class 0x0c0310
[ 0.065830] pci 0000:00:04.0: reg 0x10: [mem 0xfce7d000-0xfce7dfff]
[ 0.065865] pci 0000:00:04.0: supports D1 D2
[ 0.065866] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065942] pci 0000:00:04.1: [10de:077e] type 00 class 0x0c0320
[ 0.065953] pci 0000:00:04.1: reg 0x10: [mem 0xfce7f800-0xfce7f8ff]
[ 0.065992] pci 0000:00:04.1: supports D1 D2
[ 0.065993] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.066077] pci 0000:00:06.0: [10de:0759] type 00 class 0x01018a
[ 0.066100] pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf]
[ 0.066109] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.066110] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.066111] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.066112] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.066201] pci 0000:00:07.0: [10de:0774] type 00 class 0x040300
[ 0.066212] pci 0000:00:07.0: reg 0x10: [mem 0xfce78000-0xfce7bfff]
[ 0.066253] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.066331] pci 0000:00:08.0: [10de:075a] type 01 class 0x060401
[ 0.066442] pci 0000:00:09.0: [10de:0ad0] type 00 class 0x010185
[ 0.066450] pci 0000:00:09.0: reg 0x10: [io 0xd480-0xd487]
[ 0.066453] pci 0000:00:09.0: reg 0x14: [io 0xd400-0xd403]
[ 0.066457] pci 0000:00:09.0: reg 0x18: [io 0xd080-0xd087]
[ 0.066460] pci 0000:00:09.0: reg 0x1c: [io 0xd000-0xd003]
[ 0.066463] pci 0000:00:09.0: reg 0x20: [io 0xcc00-0xcc0f]
[ 0.066467] pci 0000:00:09.0: reg 0x24: [mem 0xfce76000-0xfce77fff]
[ 0.066560] pci 0000:00:0a.0: [10de:0760] type 00 class 0x020000
[ 0.066568] pci 0000:00:0a.0: reg 0x10: [mem 0xfce7c000-0xfce7cfff]
[ 0.066572] pci 0000:00:0a.0: reg 0x14: [io 0xc880-0xc887]
[ 0.066576] pci 0000:00:0a.0: reg 0x18: [mem 0xfce7f400-0xfce7f4ff]
[ 0.066579] pci 0000:00:0a.0: reg 0x1c: [mem 0xfce7f000-0xfce7f00f]
[ 0.066607] pci 0000:00:0a.0: supports D1 D2
[ 0.066608] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.066723] pci 0000:00:10.0: [10de:0778] type 01 class 0x060400
[ 0.066830] pci 0000:00:10.0: enabling Extended Tags
[ 0.066966] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.067112] pci 0000:00:12.0: [10de:075b] type 01 class 0x060400
[ 0.067203] pci 0000:00:12.0: enabling Extended Tags
[ 0.067336] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.067452] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.067533] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.067608] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.067686] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.067766] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.067879] pci 0000:01:07.0: [1814:0601] type 00 class 0x028000
[ 0.067893] pci 0000:01:07.0: reg 0x10: [mem 0xfcff0000-0xfcffffff]
[ 0.067992] pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.067995] pci 0000:00:08.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.067997] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.067998] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.068002] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.068004] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.068005] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfed44fff window] (subtractive decode)
[ 0.068103] pci 0000:02:00.0: [10de:0f02] type 00 class 0x030000
[ 0.068117] pci 0000:02:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.068124] pci 0000:02:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.068132] pci 0000:02:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.068137] pci 0000:02:00.0: reg 0x24: [io 0xec00-0xec7f]
[ 0.068142] pci 0000:02:00.0: reg 0x30: [mem 0xfeb00000-0xfeb7ffff pref]
[ 0.068149] pci 0000:02:00.0: enabling Extended Tags
[ 0.068222] pci 0000:02:00.1: [10de:0bea] type 00 class 0x040300
[ 0.068233] pci 0000:02:00.1: reg 0x10: [mem 0xfebfc000-0xfebfffff]
[ 0.068264] pci 0000:02:00.1: enabling Extended Tags
[ 0.080051] pci 0000:00:10.0: PCI bridge to [bus 02]
[ 0.080066] pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
[ 0.080073] pci 0000:00:10.0: bridge window [mem 0xfd000000-0xfebfffff]
[ 0.080085] pci 0000:00:10.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
[ 0.080211] pci 0000:00:12.0: PCI bridge to [bus 03]
[ 0.081776] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.081928] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
[ 0.082073] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.082218] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.082365] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[ 0.082513] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *10
[ 0.082657] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.082801] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.082945] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.083090] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.083234] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.083379] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.083527] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
[ 0.083672] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.083816] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.083961] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.084122] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
[ 0.084268] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.084413] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.084558] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.084702] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
[ 0.084846] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.084991] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.085137] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.085283] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.085428] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.085573] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.085719] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.085864] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.086009] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.086154] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.086299] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.086444] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[ 0.086589] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[ 0.086734] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[ 0.086879] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[ 0.087028] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
[ 0.087175] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.087322] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
[ 0.087469] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.087614] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[ 0.087761] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.087908] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *15
[ 0.088059] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.088220] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.088368] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
[ 0.088515] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
[ 0.088834] SCSI subsystem initialized
[ 0.088886] libata version 3.00 loaded.
[ 0.088886] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[ 0.088886] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.088886] pci 0000:02:00.0: vgaarb: bridge control possible
[ 0.088886] vgaarb: loaded
[ 0.088886] ACPI: bus type USB registered
[ 0.088886] usbcore: registered new interface driver usbfs
[ 0.088886] usbcore: registered new interface driver hub
[ 0.088886] usbcore: registered new device driver usb
[ 0.092035] EDAC MC: Ver: 3.0.0
[ 0.092164] PCI: Using ACPI for IRQ routing
[ 0.095970] PCI: pci_cache_line_size set to 64 bytes
[ 0.096033] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.096034] e820: reserve RAM buffer [mem 0xdff90000-0xdfffffff]
[ 0.096150] NetLabel: Initializing
[ 0.096150] NetLabel: domain hash size = 128
[ 0.096151] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.096167] NetLabel: unlabeled traffic allowed by default
[ 0.096184] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.096184] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.096184] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.100050] clocksource: Switched to clocksource hpet
[ 0.113631] VFS: Disk quotas dquot_6.6.0
[ 0.113651] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.113769] AppArmor: AppArmor Filesystem Enabled
[ 0.113802] pnp: PnP ACPI init
[ 0.114528] pnp 00:00: [dma 2]
[ 0.114572] pnp 00:00: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.115313] pnp 00:01: [dma 0 disabled]
[ 0.115562] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.116038] pnp 00:02: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.116039] pnp 00:02: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.116102] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.116104] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.116105] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.116106] system 00:02: [io 0x0580-0x05ff] has been reserved
[ 0.116108] system 00:02: [io 0x0800-0x087f] could not be reserved
[ 0.116109] system 00:02: [io 0x0880-0x08ff] has been reserved
[ 0.116111] system 00:02: [io 0x0d00-0x0d7f] has been reserved
[ 0.116112] system 00:02: [io 0x0d80-0x0dff] has been reserved
[ 0.116114] system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.116115] system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.116117] system 00:02: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.116118] system 00:02: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.116120] system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.116124] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.116214] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.116375] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.116377] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.116380] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.116649] system 00:05: [io 0x0230-0x023f] has been reserved
[ 0.116650] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.116651] system 00:05: [io 0x0a00-0x0a0f] has been reserved
[ 0.116655] system 00:05: [io 0x0a10-0x0a1f] has been reserved
[ 0.116658] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.117198] pnp 00:06: [dma 0 disabled]
[ 0.117251] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.117345] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.117348] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.117564] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.117566] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.117567] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.117569] system 00:08: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.117570] system 00:08: [mem 0xfed45000-0xffffffff] could not be reserved
[ 0.117573] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.118492] pnp: PnP ACPI: found 9 devices
[ 0.124998] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.125048] pci 0000:00:08.0: PCI bridge to [bus 01]
[ 0.125051] pci 0000:00:08.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.125056] pci 0000:00:10.0: PCI bridge to [bus 02]
[ 0.125060] pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
[ 0.125068] pci 0000:00:10.0: bridge window [mem 0xfd000000-0xfebfffff]
[ 0.125075] pci 0000:00:10.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
[ 0.125086] pci 0000:00:12.0: PCI bridge to [bus 03]
[ 0.125111] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.125112] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.125113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.125115] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.125116] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed44fff window]
[ 0.125117] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 0.125119] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.125120] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.125121] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.125122] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.125123] pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfed44fff window]
[ 0.125124] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.125126] pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfebfffff]
[ 0.125127] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xfbffffff 64bit pref]
[ 0.125226] NET: Registered protocol family 2
[ 0.125462] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.125646] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.125944] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.126024] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.126078] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.126185] NET: Registered protocol family 1
[ 0.126669] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.260568] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.261015] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[ 0.340560] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
[ 0.340788] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 0.340881] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.340976] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.341074] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.341195] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.341202] PCI: CLS 64 bytes, default 64
[ 0.341252] Unpacking initramfs...
[ 1.105825] Freeing initrd memory: 54672K
[ 1.106447] PCI-DMA: Disabling AGP.
[ 1.106523] PCI-DMA: aperture base @ d4000000 size 65536 KB
[ 1.106523] PCI-DMA: using GART IOMMU.
[ 1.106525] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.108973] LVT offset 1 assigned for vector 0x400
[ 1.108983] IBS: LVT offset 1 assigned
[ 1.109052] perf: AMD IBS detected (0x0000001f)
[ 1.109116] Scanning for low memory corruption every 60 seconds
[ 1.109754] Initialise system trusted keyrings
[ 1.109764] Key type blacklist registered
[ 1.109876] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.111027] zbud: loaded
[ 1.111437] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.111668] fuse init (API version 7.26)
[ 1.113665] Key type asymmetric registered
[ 1.113667] Asymmetric key parser 'x509' registered
[ 1.113730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.113781] io scheduler noop registered
[ 1.113782] io scheduler deadline registered
[ 1.113828] io scheduler cfq registered (default)
[ 1.114373] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[ 1.114828] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
[ 1.115105] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.115116] ACPI: Power Button [PWRB]
[ 1.115153] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.115202] ACPI: Power Button [PWRF]
[ 1.115506] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.135982] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.138284] Linux agpgart interface v0.103
[ 1.140196] loop: module loaded
[ 1.140419] libphy: Fixed MDIO Bus: probed
[ 1.140420] tun: Universal TUN/TAP device driver, 1.6
[ 1.140515] PPP generic driver version 2.4.2
[ 1.140609] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.140612] ehci-pci: EHCI PCI platform driver
[ 1.140827] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 1.140833] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.140841] ehci-pci 0000:00:02.1: debug port 1
[ 1.140872] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 1.140893] ehci-pci 0000:00:02.1: irq 22, io mem 0xfce7fc00
[ 1.156060] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.156134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.156136] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.156137] usb usb1: Product: EHCI Host Controller
[ 1.156138] usb usb1: Manufacturer: Linux 4.15.0-29-generic ehci_hcd
[ 1.156139] usb usb1: SerialNumber: 0000:00:02.1
[ 1.156321] hub 1-0:1.0: USB hub found
[ 1.156328] hub 1-0:1.0: 6 ports detected
[ 1.156706] ehci-pci 0000:00:04.1: EHCI Host Controller
[ 1.156711] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 1.156718] ehci-pci 0000:00:04.1: debug port 1
[ 1.156743] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[ 1.156763] ehci-pci 0000:00:04.1: irq 20, io mem 0xfce7f800
[ 1.172062] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 1.172119] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.172120] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.172121] usb usb2: Product: EHCI Host Controller
[ 1.172122] usb usb2: Manufacturer: Linux 4.15.0-29-generic ehci_hcd
[ 1.172123] usb usb2: SerialNumber: 0000:00:04.1
[ 1.172311] hub 2-0:1.0: USB hub found
[ 1.172317] hub 2-0:1.0: 6 ports detected
[ 1.172497] ehci-platform: EHCI generic platform driver
[ 1.172523] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.172533] ohci-pci: OHCI PCI platform driver
[ 1.172780] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 1.172787] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 1.172829] ohci-pci 0000:00:02.0: irq 23, io mem 0xfce7e000
[ 1.234090] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.234092] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.234093] usb usb3: Product: OHCI PCI host controller
[ 1.234094] usb usb3: Manufacturer: Linux 4.15.0-29-generic ohci_hcd
[ 1.234095] usb usb3: SerialNumber: 0000:00:02.0
[ 1.234298] hub 3-0:1.0: USB hub found
[ 1.234305] hub 3-0:1.0: 6 ports detected
[ 1.234673] ohci-pci 0000:00:04.0: OHCI PCI host controller
[ 1.234678] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 1.234723] ohci-pci 0000:00:04.0: irq 21, io mem 0xfce7d000
[ 1.294088] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.294091] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.294092] usb usb4: Product: OHCI PCI host controller
[ 1.294093] usb usb4: Manufacturer: Linux 4.15.0-29-generic ohci_hcd
[ 1.294094] usb usb4: SerialNumber: 0000:00:04.0
[ 1.294318] hub 4-0:1.0: USB hub found
[ 1.294326] hub 4-0:1.0: 6 ports detected
[ 1.294517] ohci-platform: OHCI generic platform driver
[ 1.294539] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.294604] i8042: PNP: No PS/2 controller found.
[ 1.294604] i8042: Probing ports directly.
[ 1.295078] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.295085] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.295269] mousedev: PS/2 mouse device common for all mice
[ 1.295433] rtc_cmos 00:03: RTC can wake from S4
[ 1.295722] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.295787] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.295796] i2c /dev entries driver
[ 1.295852] device-mapper: uevent: version 1.0.3
[ 1.295974] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.296025] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.296417] NET: Registered protocol family 10
[ 1.300570] Segment Routing with IPv6
[ 1.300598] NET: Registered protocol family 17
[ 1.300658] Key type dns_resolver registered
[ 1.300960] RAS: Correctable Errors collector initialized.
[ 1.300992] sched_clock: Marking stable (1300903080, 0)->(1382774611, -81871531)
[ 1.301209] registered taskstats version 1
[ 1.301218] Loading compiled-in X.509 certificates
[ 1.304303] Loaded X.509 cert 'Build time autogenerated kernel key: 1cc37f41791529df57507d3747a6804ab53f482b'
[ 1.304338] zswap: loaded using pool lzo/zbud
[ 1.308136] Key type big_key registered
[ 1.308141] Key type trusted registered
[ 1.309885] Key type encrypted registered
[ 1.309893] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.309897] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.309922] evm: HMAC attrs: 0x1
[ 1.310250] Magic number: 2:0:0
[ 1.310347] memory memory48: hash matches
[ 1.310448] rtc_cmos 00:03: setting system clock to 2002-01-01 00:02:26 UTC (1009843346)
[ 1.310623] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.310705] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.310706] EDD information not available.
[ 1.314387] Freeing unused kernel memory: 2408K
[ 1.324126] Write protecting the kernel read-only data: 20480k
[ 1.324923] Freeing unused kernel memory: 2008K
[ 1.329965] Freeing unused kernel memory: 1904K
[ 1.337919] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.420048] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 1.420055] ACPI Warning: SystemIO range 0x0000000000000700-0x000000000000073F conflicts with OpRegion 0x0000000000000700-0x000000000000073F (\SM00) (20170831/utaddress-247)
[ 1.420061] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.425634] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.430366] Floppy drive(s): fd0 is 1.44M
[ 1.452151] FDC 0 is a post-1991 82077
[ 1.456412] pata_amd 0000:00:06.0: version 0.4.1
[ 1.464387] scsi host0: pata_amd
[ 1.471744] scsi host1: pata_amd
[ 1.471797] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.471798] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.472068] ahci 0000:00:09.0: version 3.0
[ 1.472477] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 1.472503] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 1.472601] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 1.472603] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh
[ 1.495302] scsi host2: ahci
[ 1.495441] scsi host3: ahci
[ 1.495509] scsi host4: ahci
[ 1.498331] scsi host5: ahci
[ 1.498540] scsi host6: ahci
[ 1.500367] scsi host7: ahci
[ 1.500449] ata3: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76100 irq 24
[ 1.500451] ata4: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76180 irq 24
[ 1.500452] ata5: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76200 irq 24
[ 1.500454] ata6: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76280 irq 24
[ 1.500455] ata7: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76300 irq 24
[ 1.500456] ata8: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76380 irq 24
[ 1.500925] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.501356] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 1.504253] MXM: GUID detected in BIOS
[ 1.504456] nouveau 0000:02:00.0: NVIDIA GF108 (0c1100a1)
[ 1.519992] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.643177] nouveau 0000:02:00.0: bios: version 70.08.ae.00.00
[ 1.644855] ata2: port disabled--ignoring
[ 1.645525] nouveau 0000:02:00.0: fb: 2048 MiB DDR3
[ 1.681068] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 90:e6:ba:c1:7d:d3
[ 1.681070] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 1.685699] forcedeth 0000:00:0a.0 enp0s10: renamed from eth0
[ 1.814965] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.814988] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.815002] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.815015] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.815027] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.816073] ata3.00: ATA-8: STM3500418AS, CC38, max UDMA/133
[ 1.816075] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.817316] ata3.00: configured for UDMA/133
[ 1.817534] scsi 2:0:0:0: Direct-Access ATA STM3500418AS CC38 PQ: 0 ANSI: 5
[ 1.817792] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.817803] sd 2:0:0:0: [sda] Write Protect is off
[ 1.817804] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.817826] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.818076] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.818812] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.819274] ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB02, max UDMA/100
[ 1.820231] ata5.00: configured for UDMA/100
[ 1.821240] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB02 PQ: 0 ANSI: 5
[ 1.825861] sda: sda1 sda2 < sda5 >
[ 1.826334] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.840055] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 1.888096] usb 2-1: New USB device found, idVendor=1058, idProduct=0748
[ 1.888098] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 1.888099] usb 2-1: Product: My Passport 0748
[ 1.888100] usb 2-1: Manufacturer: Western Digital
[ 1.888101] usb 2-1: SerialNumber: 575843314533324658504B32
[ 1.897882] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.897885] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.898041] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.898134] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.096017] usb 2-2: new high-speed USB device number 3 using ehci-pci
[ 2.140039] tsc: Refined TSC clocksource calibration: 2999.999 MHz
[ 2.140045] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e44b2357, max_idle_ns: 440795324996 ns
[ 2.192021] usb 3-1: New USB device found, idVendor=093a, idProduct=2521
[ 2.192023] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.192024] usb 3-1: Product: USB OPTICAL MOUSE
[ 2.228149] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.236711] usbcore: registered new interface driver usbhid
[ 2.236712] usbhid: USB HID core driver
[ 2.239009] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/0003:093A:2521.0001/input/input5
[ 2.239262] hid-generic 0003:093A:2521.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:00:02.0-1/input0
[ 2.426084] random: fast init done
[ 2.464025] usb 2-2: New USB device found, idVendor=046d, idProduct=082b
[ 2.464026] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.464027] usb 2-2: Product: Webcam C170
[ 2.464028] usb 2-2: Manufacturer:
[ 2.480091] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.480100] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.480125] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.480127] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.480134] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.480138] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.512094] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.512105] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.512125] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.512128] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.624021] usb 3-2: new low-speed USB device number 3 using ohci-pci
[ 2.948053] usb 4-3: new low-speed USB device number 2 using ohci-pci
[ 2.948498] [TTM] Zone kernel: Available graphics memory: 4084256 kiB
[ 2.948499] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.948499] [TTM] Initializing pool allocator
[ 2.948504] [TTM] Initializing DMA pool allocator
[ 2.948516] nouveau 0000:02:00.0: DRM: VRAM: 2048 MiB
[ 2.948518] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[ 2.948521] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[ 2.948522] nouveau 0000:02:00.0: DRM: DCB version 4.0
[ 2.948524] nouveau 0000:02:00.0: DRM: DCB outp 00: 01000302 00020030
[ 2.948526] nouveau 0000:02:00.0: DRM: DCB outp 01: 02000300 00000000
[ 2.948527] nouveau 0000:02:00.0: DRM: DCB outp 02: 08011392 00020020
[ 2.948529] nouveau 0000:02:00.0: DRM: DCB outp 03: 04022310 00000000
[ 2.948530] nouveau 0000:02:00.0: DRM: DCB conn 00: 00001030
[ 2.948531] nouveau 0000:02:00.0: DRM: DCB conn 01: 00002161
[ 2.948532] nouveau 0000:02:00.0: DRM: DCB conn 02: 00000200
[ 2.949486] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.949487] [drm] Driver supports precise vblank timestamp query.
[ 2.950318] nouveau 0000:02:00.0: DRM: MM: using COPY0 for buffer copies
[ 2.981638] usb 3-2: New USB device found, idVendor=05a4, idProduct=9840
[ 2.981640] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.981641] usb 3-2: Product: USB Compliant Keypad
[ 2.998666] input: USB Compliant Keypad as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/0003:05A4:9840.0002/input/input6
[ 3.021543] nouveau 0000:02:00.0: DRM: allocated 1680x1050 fb: 0x60000, bo (ptrval)
[ 3.053917] fbcon: nouveaufb (fb0) is primary device
[ 3.056097] usb 1-6: new high-speed USB device number 4 using ehci-pci
[ 3.056692] hid-generic 0003:05A4:9840.0002: input,hidraw1: USB HID v1.10 Keyboard [USB Compliant Keypad] on usb-0000:00:02.0-2/input0
[ 3.145201] Console: switching to colour frame buffer device 210x65
[ 3.161787] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[ 3.164156] clocksource: Switched to clocksource tsc
[ 3.176060] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[ 3.207090] usb 4-3: New USB device found, idVendor=1e54, idProduct=2030
[ 3.207092] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.207093] usb 4-3: Product: USB Keyboard
[ 3.207094] usb 4-3: Manufacturer: TypeMatrix.com
[ 3.224385] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/0003:1E54:2030.0003/input/input7
[ 3.228064] usb 1-6: New USB device found, idVendor=05e3, idProduct=0745
[ 3.228066] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 3.228068] usb 1-6: Product: USB Storage
[ 3.228069] usb 1-6: SerialNumber: 000000000903
[ 3.284209] hid-generic 0003:1E54:2030.0003: input,hidraw2: USB HID v1.10 Keyboard [TypeMatrix.com USB Keyboard] on usb-0000:00:04.0-3/input0
[ 3.301807] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.1/0003:1E54:2030.0004/input/input8
[ 3.360238] hid-generic 0003:1E54:2030.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [TypeMatrix.com USB Keyboard] on usb-0000:00:04.0-3/input1
[ 3.492470] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 3.492923] scsi host8: usb-storage 2-1:1.0
[ 3.493045] usb-storage 1-6:1.0: USB Mass Storage device detected
[ 3.493119] scsi host9: usb-storage 1-6:1.0
[ 3.493236] usbcore: registered new interface driver usb-storage
[ 3.494774] usbcore: registered new interface driver uas
[ 4.510102] scsi 8:0:0:0: Direct-Access WD My Passport 0748 1010 PQ: 0 ANSI: 6
[ 4.510217] scsi 9:0:0:0: Direct-Access Generic STORAGE DEVICE 0903 PQ: 0 ANSI: 6
[ 4.510604] scsi 8:0:0:1: Enclosure WD SES Device 1010 PQ: 0 ANSI: 6
[ 4.517329] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 4.517428] scsi 8:0:0:1: Attached scsi generic sg3 type 13
[ 4.517559] sd 9:0:0:0: Attached scsi generic sg4 type 0
[ 4.520048] sd 8:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[ 4.521924] sd 8:0:0:0: [sdb] Write Protect is off
[ 4.521928] sd 8:0:0:0: [sdb] Mode Sense: 47 00 10 08
[ 4.523968] sd 8:0:0:0: [sdb] No Caching mode page found
[ 4.523989] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4.525058] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 4.530972] scsi 8:0:0:1: Wrong diagnostic page; asked for 1 got 8
[ 4.530990] scsi 8:0:0:1: Failed to get diagnostic page 0x1
[ 4.530996] scsi 8:0:0:1: Failed to bind enclosure -19
[ 4.531055] ses 8:0:0:1: Attached Enclosure device
[ 4.531435] sdb: sdb1
[ 4.537968] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 46.408526] print_req_error: I/O error, dev fd0, sector 0
[ 46.408543] floppy: error 10 while reading block 0
[ 46.875967] random: crng init done
[ 59.268484] print_req_error: I/O error, dev fd0, sector 0
[ 59.268499] floppy: error 10 while reading block 0
[ 71.628525] print_req_error: I/O error, dev fd0, sector 0
[ 71.628541] floppy: error 10 while reading block 0
[ 83.980555] print_req_error: I/O error, dev fd0, sector 0
[ 83.980571] floppy: error 10 while reading block 0
[ 98.020841] print_req_error: I/O error, dev fd0, sector 0
[ 98.020858] floppy: error 10 while reading block 0
[ 110.372532] print_req_error: I/O error, dev fd0, sector 0
[ 110.372548] floppy: error 10 while reading block 0
[ 123.288911] print_req_error: I/O error, dev fd0, sector 0
[ 123.288927] floppy: error 10 while reading block 0
[ 135.648708] print_req_error: I/O error, dev fd0, sector 0
[ 135.648723] floppy: error 10 while reading block 0
[ 148.649003] print_req_error: I/O error, dev fd0, sector 0
[ 148.649020] floppy: error 10 while reading block 0
[ 161.008734] print_req_error: I/O error, dev fd0, sector 0
[ 161.008750] floppy: error 10 while reading block 0
[ 173.908496] print_req_error: I/O error, dev fd0, sector 0
[ 173.908511] floppy: error 10 while reading block 0
[ 186.260560] print_req_error: I/O error, dev fd0, sector 0
[ 186.260576] floppy: error 10 while reading block 0
[ 187.215964] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 188.528121] systemd[1]: System time before build time, advancing clock.
[ 188.899681] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 189.021683] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 189.021810] systemd[1]: Detected architecture x86-64.
[ 189.040373] systemd[1]: Set hostname to <dlm>.
[ 191.260102] systemd[1]: Created slice User and Session Slice.
[ 191.260196] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 191.260216] systemd[1]: Reached target User and Group Name Lookups.
[ 191.260231] systemd[1]: Reached target Remote File Systems.
[ 191.260390] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 191.260529] systemd[1]: Created slice System Slice.
[ 191.260594] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 191.898956] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 192.101817] systemd-journald[331]: Received request to flush runtime journal from PID 1
[ 192.303433] lp: driver loaded but no devices found
[ 192.376549] ppdev: user-space parallel port driver
[ 192.438728] systemd-journald[331]: File /var/log/journal/0e8c4695b5f648c385ddc5a2aaad94dc/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 192.447893] parport_pc 00:01: reported by Plug and Play ACPI
[ 192.447964] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 192.544184] lp0: using parport0 (interrupt-driven).
[ 204.121825] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 204.287247] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 204.331131] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 204.333484] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 204.639315] media: Linux media interface: v0.10
[ 204.659047] Linux video capture interface: v2.00
[ 204.710581] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
[ 204.710680] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2860, rev 0103 detected
[ 204.723812] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[ 204.783799] uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b)
[ 204.789280] uvcvideo 2-2:1.0: Entity type for entity Processing 2 was not initialized!
[ 204.789284] uvcvideo 2-2:1.0: Entity type for entity Extension 6 was not initialized!
[ 204.789285] uvcvideo 2-2:1.0: Entity type for entity Camera 1 was not initialized!
[ 204.789370] input: Webcam C170: Webcam C170 as /devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input9
[ 204.789447] usbcore: registered new interface driver uvcvideo
[ 204.789447] USB Video Class driver (1.1.1)
[ 204.795860] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 204.854322] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 204.854333] snd_hda_intel 0000:00:07.0: Disabling MSI
[ 204.854879] ACPI: PCI Interrupt Link [LN0B] enabled at IRQ 16
[ 204.854902] snd_hda_intel 0000:02:00.1: Disabling MSI
[ 204.854911] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[ 204.901327] usbcore: registered new interface driver snd-usb-audio
[ 206.068145] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708B 8-Ch: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 206.068148] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 206.068150] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 206.068150] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 206.068152] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
[ 206.068152] snd_hda_codec_via hdaudioC0D0: inputs:
[ 206.068154] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 206.068155] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 206.068156] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 206.068158] snd_hda_codec_via hdaudioC0D0: CD=0x1f
[ 206.092487] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input10
[ 206.092537] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input11
[ 206.092583] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input12
[ 206.092628] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input13
[ 206.186165] kvm: Nested Virtualization enabled
[ 206.186168] kvm: Nested Paging enabled
[ 206.187979] MCE: In-kernel MCE decoding enabled.
[ 206.214711] EDAC amd64: Node 0: DRAM ECC disabled.
[ 206.214714] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 206.244505] EDAC amd64: Node 0: DRAM ECC disabled.
[ 206.244507] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 206.264043] rt2800pci 0000:01:07.0 wlp1s7: renamed from wlan0
[ 207.284434] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input14
[ 207.284485] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input15
[ 207.284527] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input16
[ 207.284571] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input17
[ 207.284613] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input18
[ 207.284654] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input19
[ 207.284697] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input20
[ 207.284740] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input21
[ 209.151541] Adding 8257532k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:8257532k FS
[ 210.118159] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 210.125931] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 210.727537] audit: type=1400 audit(1532971212.934:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=755 comm="apparmor_parser"
[ 210.727542] audit: type=1400 audit(1532971212.934:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=755 comm="apparmor_parser"
[ 210.727545] audit: type=1400 audit(1532971212.934:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=755 comm="apparmor_parser"
[ 210.727547] audit: type=1400 audit(1532971212.934:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=755 comm="apparmor_parser"
[ 210.753832] audit: type=1400 audit(1532971212.962:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=754 comm="apparmor_parser"
[ 210.753838] audit: type=1400 audit(1532971212.962:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=754 comm="apparmor_parser"
[ 210.791119] audit: type=1400 audit(1532971212.998:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=761 comm="apparmor_parser"
[ 210.813699] audit: type=1400 audit(1532971213.022:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=759 comm="apparmor_parser"
[ 210.813705] audit: type=1400 audit(1532971213.022:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=759 comm="apparmor_parser"
[ 210.813707] audit: type=1400 audit(1532971213.022:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=759 comm="apparmor_parser"
[ 216.526678] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
[ 216.527232] forcedeth 0000:00:0a.0 enp0s10: MSI enabled
[ 216.527455] forcedeth 0000:00:0a.0 enp0s10: no link during initialization
[ 216.527877] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
[ 216.556178] IPv6: ADDRCONF(NETDEV_UP): wlp1s7: link is not ready
[ 216.556227] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[ 216.629589] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
[ 216.680646] IPv6: ADDRCONF(NETDEV_UP): wlp1s7: link is not ready
[ 217.112526] IPv6: ADDRCONF(NETDEV_UP): wlp1s7: link is not ready
[ 219.076258] wlp1s7: authenticate with 62:7a:0d:84:8c:60
[ 219.079206] wlp1s7: send auth to 62:7a:0d:84:8c:60 (try 1/3)
[ 219.084741] wlp1s7: authenticated
[ 219.088091] wlp1s7: associate with 62:7a:0d:84:8c:60 (try 1/3)
[ 219.096818] wlp1s7: RX AssocResp from 62:7a:0d:84:8c:60 (capab=0x411 status=0 aid=2)
[ 219.096894] wlp1s7: associated
[ 222.620749] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s7: link becomes ready
[ 228.680053] usb 2-2: reset high-speed USB device number 3 using ehci-pci
[ 254.076108] usb 2-6: new high-speed USB device number 5 using ehci-pci
[ 254.233292] usb 2-6: New USB device found, idVendor=04b0, idProduct=0348
[ 254.233301] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 254.233306] usb 2-6: Product: NIKON DSC COOLPIX P600-PTP
[ 254.233310] usb 2-6: Manufacturer: NIKON
[ 254.233313] usb 2-6: SerialNumber: 00000000000000000000000040057738
[ 323.471796] kauditd_printk_skb: 39 callbacks suppressed
[ 323.471798] audit: type=1400 audit(1533047049.054:51): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/dan/.cache/mesa_shader_cache/index" pid=2557 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[ 326.608322] audit: type=1400 audit(1533047052.194:52): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/dan/.config/font-manager/select.conf" pid=2556 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 327.237017] audit: type=1400 audit(1533047052.822:53): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/dan/.local/share/font-manager/Library/C/compc3o.ttf" pid=2556 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 327.247741] audit: type=1400 audit(1533047052.830:54): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/dan/.local/share/font-manager/Library/C/compc3o.ttf" pid=2556 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2280.025717] audit: type=1400 audit(1533049005.666:55): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_ad9155221d74176ee1335348db4a" pid=4166 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[ 2280.025822] audit: type=1400 audit(1533049005.666:56): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_ad9155221d74176ee1335348db4a" pid=4166 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 2280.025825] audit: type=1400 audit(1533049005.666:57): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_ad9155221d74176ee1335348db4a" pid=4166 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 2280.220322] audit: type=1400 audit(1533049005.862:58): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/dan/.cache/mesa_shader_cache/index" pid=4186 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[ 2281.321733] audit: type=1400 audit(1533049006.962:59): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/dan/.config/font-manager/select.conf" pid=4185 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2281.361968] audit: type=1400 audit(1533049007.002:60): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/dan/.local/share/font-manager/Library/C/compc3o.ttf" pid=4185 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2281.361996] audit: type=1400 audit(1533049007.002:61): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/dan/.local/share/font-manager/Library/C/compc3o.ttf" pid=4185 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
dan@dlm:~$Dernière modification par zyghot (Le 31/07/2018, à 17:42)
Hors ligne
#7 Le 31/07/2018, à 17:42
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
dan@dlm:~$ systemd-analyze blame
1min 48.451s apt-daily.service
33.195s apt-daily-upgrade.service
15.898s dev-mapper-ubuntu\x2d\x2dvg\x2droot.device
11.760s lvm2-monitor.service
10.796s systemd-tmpfiles-setup-dev.service
7.212s NetworkManager-wait-online.service
5.565s plymouth-start.service
4.888s snapd.service
4.274s NetworkManager.service
3.777s udisks2.service
3.756s dev-loop9.device
3.572s dev-loop10.device
3.383s systemd-sysctl.service
3.292s networkd-dispatcher.service
3.196s accounts-daemon.service
3.071s dev-loop8.device
2.729s dev-loop6.device
2.504s systemd-fsck@dev-disk-by\x2duuid-f878edf6\x2dc626\x2d406f\x2da2
2.424s ModemManager.service
2.389s dev-loop5.device
2.219s dev-loop1.device
2.174s dev-loop7.device
2.158s keyboard-setup.service
lines 1-23Hors ligne
#8 Le 31/07/2018, à 17:43
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
2.158s keyboard-setup.service
1.986s dev-loop4.device
1.897s dev-loop3.device
1.842s dev-loop0.device
1.784s thermald.service
1.661s lvm2-pvscan@8:5.service
1.644s dev-loop2.device
1.639s upower.service
1.605s wpa_supplicant.service
1.395s apparmor.service
1.365s networking.service
1.320s systemd-udevd.service
1.316s systemd-modules-load.service
1.310s fwupd.service
1.167s systemd-journal-flush.service
1.152s lightdm.service
1.143s plymouth-quit-wait.service
1.079s grub-common.service
1.058s rsyslog.service
965ms avahi-daemon.service
901ms systemd-random-seed.service
816ms apport.service
694ms polkit.service
663ms systemd-rfkill.service
616ms dev-hugepages.mount
574ms colord.service
574ms motd-news.service
572ms dev-mqueue.mount
567ms systemd-remount-fs.service
565ms packagekit.service
553ms sys-kernel-debug.mount
522ms snap-gnome\x2dsystem\x2dmonitor-51.mount
513ms ufw.service
503ms mnt-usb\x2dGeneric_STORAGE_DEVICE_000000000903\x2d0:0.mount
490ms snap-sweethome3d\x2dhomedesign-3.mount
475ms snap-skype-45.mount
444ms kmod-static-nodes.service
426ms systemd-udev-trigger.service
426ms gpu-manager.service
407ms snap-sweethome3d\x2dhomedesign-4.mount
373ms snap-gnome\x2dcalculator-180.mount
363ms snap-gtk\x2dcommon\x2dthemes-319.mount
360ms snap-sudoku\x2dgame-1.mount
305ms systemd-logind.service
304ms systemd-journald.service
297ms systemd-resolved.service
289ms snap-core-4917.mount
286ms snap-gnome\x2d3\x2d26\x2d1604-70.mount
281ms systemd-tmpfiles-setup.service
259ms dev-mapper-ubuntu\x2d\x2dvg\x2dswap_1.swap
239ms user@1000.service
200ms blk-availability.service
181ms snap-gnome\x2dcharacters-103.mount
181ms systemd-timesyncd.service
167ms snap-gnome\x2dlogs-37.mount
142ms plymouth-read-write.service
107ms snapd.seeded.service
100ms systemd-update-utmp.service
98ms binfmt-support.service
63ms speech-dispatcher.service
57ms setvtrgb.service
53ms boot.mount
38ms pppd-dns.service
36ms systemd-tmpfiles-clean.service
24ms alsa-restore.service
19ms kerneloops.service
12ms rtkit-daemon.service
12ms dns-clean.service
12ms console-setup.service
12ms resolvconf-pull-resolved.service
10ms systemd-update-utmp-runlevel.service
7ms ureadahead-stop.service
7ms proc-sys-fs-binfmt_misc.mount
5ms resolvconf.service
4ms systemd-user-sessions.service
4ms sys-fs-fuse-connections.mount
3ms sys-kernel-config.mount
1ms snapd.socket
lines 78-100/100 (END)Hors ligne
#9 Le 31/07/2018, à 17:44
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
dan@dlm:~$ df -Th
Sys. de fichiers Type Taille Utilisé Dispo Uti% Monté sur
udev devtmpfs 3,9G 0 3,9G 0% /dev
tmpfs tmpfs 798M 1,8M 796M 1% /run
/dev/mapper/ubuntu--vg-root ext4 451G 341G 87G 80% /
tmpfs tmpfs 3,9G 6,5M 3,9G 1% /dev/shm
tmpfs tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs tmpfs 3,9G 0 3,9G 0% /sys/fs/cgroup
/dev/loop6 squashfs 15M 15M 0 100% /snap/gnome-logs/37
/dev/loop10 squashfs 13M 13M 0 100% /snap/gnome-characters/103
/dev/loop1 squashfs 87M 87M 0 100% /snap/core/4917
/dev/loop5 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/70
/dev/loop2 squashfs 8,7M 8,7M 0 100% /snap/sudoku-game/1
/dev/loop7 squashfs 35M 35M 0 100% /snap/gtk-common-themes/319
/dev/loop4 squashfs 2,4M 2,4M 0 100% /snap/gnome-calculator/180
/dev/loop8 squashfs 171M 171M 0 100% /snap/sweethome3d-homedesign/4
/dev/loop0 squashfs 141M 141M 0 100% /snap/skype/45
/dev/loop9 squashfs 171M 171M 0 100% /snap/sweethome3d-homedesign/3
/dev/loop3 squashfs 3,8M 3,8M 0 100% /snap/gnome-system-monitor/51
/dev/sda1 ext2 472M 131M 317M 30% /boot
tmpfs tmpfs 798M 144K 798M 1% /run/user/1000
/dev/sdb1 fuseblk 466G 340G 126G 73% /media/dan/sauvegarde daniel5
dan@dlm:~$ Hors ligne
#10 Le 31/07/2018, à 17:59
- nam1962
Re : Mise à niveau Ubuntu 18.04 (résolu)
Tes dépôts ne sont pas top propres.
On va déjà voir ce que ça fait en les nettoyant !
sudo wget https://repogen.simplylinux.ch/txt/bionic/sources_c9c5abd57562ae85a90bbf7645346a64b0537be5.txt -O /etc/apt/sources.listpuis
software-properties-gtkPour sélectionner les dépôts partenaires (second onglet)
On va aussi virer tous les PPA qui semblent encore en xenial (ou inutiles comme le PPA Skype et le xenial-partners)
sudo rm /etc/apt/sources.list.d/*On remettra ensuite les indispensables.
Maintenant, on va nettoyer et mettre à jour, installer haveged et tu vas éteindre et démarrer pour nous dire si il y a du mieux
sudo apt clean
[[ $(dpkg -l | grep ^rc) ]] && sudo dpkg -P $(dpkg -l | grep ^rc | tr -s " " | cut -d " " -f 2)
sudo apt update
sudo apt full-upgrade
sudo apt autoremove --purge
sudo apt install haveged[Edit] J'ai trouvé ceci : https://superuser.com/questions/141770/ … 0-sector-0 as-tu un floppy ? (pour le moment ne touches pas au fstab)
Dernière modification par nam1962 (Le 31/07/2018, à 18:03)
[ Modéré ]
Hors ligne
#11 Le 31/07/2018, à 18:09
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
… je vais redémarrer …
Hors ligne
#12 Le 31/07/2018, à 18:12
- nam1962
Re : Mise à niveau Ubuntu 18.04 (résolu)
Arf.. il aurait été mieux de donner tous les retours, pour qu'on voie si tout est correct ! 
[ Modéré ]
Hors ligne
#13 Le 31/07/2018, à 18:20
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
Arrêt impossible, j'ai du le forcer, démarrage laborieux comme précédemment…
Hors ligne
#14 Le 31/07/2018, à 18:21
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
Je recommence avec envoi des retours ?
Dernière modification par zyghot (Le 31/07/2018, à 18:22)
Hors ligne
#15 Le 31/07/2018, à 18:32
- nam1962
Re : Mise à niveau Ubuntu 18.04 (résolu)
Non, ils ne seront plus utiles !
Donne
cat /etc/fstabIl faut penser à remettre le PPA de Chrome si tu l'utilises ; si oui, pourquoi pas chromium ?
Celui de ton imprimante (sauf si elle fonctionne : peux-tu vérifier ?
Et à réinstaller skype via snap ou flatpak (je te conseille flatpak)
Il y aura aussi à remettre le PPA d'Opéra (quoique je te conseille Vivaldi si tu veux vraiment cette achitecture)
[ Modéré ]
Hors ligne
#16 Le 31/07/2018, à 18:33
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
dan@dlm:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/ubuntu--vg-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=f878edf6-c626-406f-a22a-8955deeffc42 /boot ext2 defaults 0 2
/dev/mapper/ubuntu--vg-swap_1 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
/dev/disk/by-id/usb-Generic_STORAGE_DEVICE_000000000903-0:0 /mnt/usb-Generic_STORAGE_DEVICE_000000000903-0:0 auto nosuid,nodev,nofail,x-gvfs-show,x-gvfs-name=jaune 0 0
/dev/disk/by-id/usb-Kingston_DataTraveler_G2_001D0F1E35B2EA509759000A-0:0-part1 /mnt/usb-Kingston_DataTraveler_G2_001D0F1E35B2EA509759000A-0:0-part1 auto nosuid,nodev,nofail,x-gvfs-show 0 0
dan@dlm:~$ Hors ligne
#17 Le 31/07/2018, à 18:41
- nam1962
Re : Mise à niveau Ubuntu 18.04 (résolu)
On va appliquer les conseils du lien que je t'indique :
sudo -H gedit /etc/fstabet tu mets un dièse # devant la ligne
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0pour la commenter
Puis
echo "blacklist floppy" | sudo tee /etc/modprobe.d/blacklist-floppy.conf && sudo rmmod floppy && sudo update-initramfs -u[ Modéré ]
Hors ligne
#18 Le 31/07/2018, à 18:41
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
Chrome, chromium, PPA… ? je ne sais pas trop ce que c'est.
L'imprimante fonctionne, elle fait recto/verso alors qu'avant je n'étais pas arrivé à la programmer pour.
skype via snap ou flatpak : il faut que je le désinstalle d'abord ? flatpay ???
PPA Opéra ou Vivaldi : quel avantage et comment ?
Merci pour ta patience, je suis un éternel novice en informatique :-) en astronomie, je me sens plus à l'aise
Hors ligne
#19 Le 31/07/2018, à 18:46
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
Voilà, c'est enregistré.
dan@dlm:~$ echo "blacklist floppy" | sudo tee /etc/modprobe.d/blacklist-floppy.conf && sudo rmmod floppy && sudo update-initramfs -u
blacklist floppy
update-initramfs: Generating /boot/initrd.img-4.15.0-29-generic
dan@dlm:~$ Dernière modification par zyghot (Le 31/07/2018, à 18:49)
Hors ligne
#20 Le 31/07/2018, à 18:48
- nam1962
Re : Mise à niveau Ubuntu 18.04 (résolu)
En astronomie, je ne suis même pas novice ! (Bon, je sais trouver la lune, mais pas tous les jours)
Vu tes dépôts, tu as du avoir le navigateur Chrome.
Mais on va faire dans l'autre sens : quel est ton navigateur préféré, quel est ton navigateur de secours, quels usages en as-tu ?
Pour skype :
sudo apt purge --auto-remove skype
sudo apt install --reinstall flatpak
flatpak remote-add --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo
flatpak install flathub com.skype.Client Il faudra juste penser à passer de temps en temps un
flatpak updatehttps://doc.ubuntu-fr.org/flatpak
https://doc.ubuntu-fr.org/snap
Dernière modification par nam1962 (Le 31/07/2018, à 18:49)
[ Modéré ]
Hors ligne
#21 Le 31/07/2018, à 18:55
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
Je ne veux pas chrome, il fonctionnait mal. Je me sers d'opéra. Je ne connais pas Vivaldi. Est-il mieux que opéra ?
Hors ligne
#22 Le 31/07/2018, à 19:00
- nam1962
Re : Mise à niveau Ubuntu 18.04 (résolu)
Je trouve que oui --> https://doc.ubuntu-fr.org/vivaldi
On va s'assurer que chrome est parti :
sudo apt purge --auto-remove google-chrome*[ Modéré ]
Hors ligne
#23 Le 31/07/2018, à 19:01
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
dan@dlm:~$ sudo apt purge --auto-remove skype
[sudo] Mot de passe de dan :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet skype
dan@dlm:~$ sudo apt install --reinstall flatpak
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
bubblewrap libostree-1-1 xdg-desktop-portal xdg-desktop-portal-gtk
Les NOUVEAUX paquets suivants seront installés :
bubblewrap flatpak libostree-1-1 xdg-desktop-portal xdg-desktop-portal-gtk
0 mis à jour, 5 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 1171 ko dans les archives.
Après cette opération, 5414 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de:1 http://fr.archive.ubuntu.com/ubuntu bionic/universe amd64 bubblewrap amd64 0.2.1-1 [32,7 kB]
Réception de:2 http://fr.archive.ubuntu.com/ubuntu bionic/universe amd64 xdg-desktop-portal amd64 0.11-1 [166 kB]
Réception de:3 http://fr.archive.ubuntu.com/ubuntu bionic/universe amd64 libostree-1-1 amd64 2018.4-2 [237 kB]
Réception de:4 http://fr.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 flatpak amd64 0.11.7-0ubuntu0.1 [612 kB]
Réception de:5 http://fr.archive.ubuntu.com/ubuntu bionic/universe amd64 xdg-desktop-portal-gtk amd64 0.11-1 [124 kB]
1171 ko réceptionnés en 5s (222 ko/s)
Sélection du paquet bubblewrap précédemment désélectionné.
(Lecture de la base de données... 212127 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../bubblewrap_0.2.1-1_amd64.deb ...
Dépaquetage de bubblewrap (0.2.1-1) ...
Sélection du paquet xdg-desktop-portal précédemment désélectionné.
Préparation du dépaquetage de .../xdg-desktop-portal_0.11-1_amd64.deb ...
Dépaquetage de xdg-desktop-portal (0.11-1) ...
Sélection du paquet libostree-1-1:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../libostree-1-1_2018.4-2_amd64.deb ...
Dépaquetage de libostree-1-1:amd64 (2018.4-2) ...
Sélection du paquet flatpak précédemment désélectionné.
Préparation du dépaquetage de .../flatpak_0.11.7-0ubuntu0.1_amd64.deb ...
Dépaquetage de flatpak (0.11.7-0ubuntu0.1) ...
Sélection du paquet xdg-desktop-portal-gtk précédemment désélectionné.
Préparation du dépaquetage de .../xdg-desktop-portal-gtk_0.11-1_amd64.deb ...
Dépaquetage de xdg-desktop-portal-gtk (0.11-1) ...
Paramétrage de libostree-1-1:amd64 (2018.4-2) ...
Traitement des actions différées (« triggers ») pour mime-support (3.60ubuntu1) ...
Traitement des actions différées (« triggers ») pour desktop-file-utils (0.23-1ubuntu3.18.04.1) ...
Traitement des actions différées (« triggers ») pour bamfdaemon (0.5.3+18.04.20180207.2-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
Paramétrage de bubblewrap (0.2.1-1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.27-3ubuntu1) ...
Traitement des actions différées (« triggers ») pour doc-base (0.10.8) ...
Traitement de 1 fichier de documentation ajouté…
Enregistrement des documents avec scrollkeeper…
Traitement des actions différées (« triggers ») pour man-db (2.8.3-2) ...
Traitement des actions différées (« triggers ») pour gnome-menus (3.13.3-11ubuntu1) ...
Traitement des actions différées (« triggers ») pour dbus (1.12.2-1ubuntu1) ...
Paramétrage de xdg-desktop-portal (0.11-1) ...
Paramétrage de xdg-desktop-portal-gtk (0.11-1) ...
Paramétrage de flatpak (0.11.7-0ubuntu0.1) ...
flatpak-system-helper.service is a disabled or a static unit, not starting it.
Traitement des actions différées (« triggers ») pour dbus (1.12.2-1ubuntu1) ...
dan@dlm:~$ flatpak remote-add --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo
dan@dlm:~$ flatpak install flathub com.skype.Client
Required runtime for com.skype.Client/x86_64/stable (org.freedesktop.Platform/x86_64/1.6) is not installed, searching...
Found in remote flathub, do you want to install it? [y/n]: y
Installing: org.freedesktop.Platform/x86_64/1.6 from flathub
[####################] 8 delta parts, 67 loose fetched; 181323 KiB transferred i
Installing: org.freedesktop.Platform.ffmpeg/x86_64/1.6 from flathub
[####################] 1 delta parts, 2 loose fetched; 2649 KiB transferred in 4
Installing: org.gtk.Gtk3theme.Ambiance/x86_64/3.22 from flathub
[####################] 1 delta parts, 1 loose fetched; 292 KiB transferred in 1
Installing: org.freedesktop.Platform.Locale/x86_64/1.6 from flathub
[####################] 19 metadata, 73 content objects fetched; 2781 KiB transfe
Installing: com.skype.Client/x86_64/stable from flathub
[####################] Downloading: 79,4 MB/79,4 MB (625,1 kB/s)
dan@dlm:~$ Hors ligne
#24 Le 31/07/2018, à 19:02
- zyghot
Re : Mise à niveau Ubuntu 18.04 (résolu)
dan@dlm:~$ sudo apt purge --auto-remove google-chrome*
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Note : sélection de google-chrome-stable pour l'expression rationnelle « google-chrome* »
Le paquet « google-chrome-stable » n'est pas installé, et ne peut donc être supprimé
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
dan@dlm:~$ Hors ligne
#25 Le 31/07/2018, à 19:06
- nam1962
Re : Mise à niveau Ubuntu 18.04 (résolu)
Repasse juste
sudo apt purge --auto-remove skype*au cas où.
Puis avec tout çà, dis nous ce que raconte
shutdown now[ Modéré ]
Hors ligne