#1 Le 30/08/2018, à 18:47
- duf65
[ RESOLU ] Probleme installation Asus GL742VW
bonjour,
Je viens d'installer cette version d'ubuntu sur mon pc
ubuntu-18.04.1-desktop-amd64
Elle fonctionnait correctement sur clé usb Live, mais quand je l'installe, sur mon disque dur, ça bugue.
Voici le message : Message d'erreur
Je suis un débutant Linuxien donc si vous avez une idée d'où ça pourrait venir, je suis preneur.
J'ai eu le même problème avec Fedora, mais l'écran restait noir.
J'ai lancé le mode débogage. CA fonctionne mais avec un affichage très grossier . Mais lorsque je relance, ça bugue et ne repars pas normalement.
Des idées ? ?
Dernière modification par duf65 (Le 02/09/2018, à 09:32)
Hors ligne
#2 Le 30/08/2018, à 18:56
- lucmars
Re : [ RESOLU ] Probleme installation Asus GL742VW
Puisque tu as installé, force l'affichage du grub et passe le parametre nomodeset (voir doc) ou optes pour le recovery mode qui utilise aussi le parametre nomodeset.
T'auras un affichage merdique mais t'en profite pour installer le pilote proprio de ta carte graphique.
Gaulois Matter !
Hors ligne
#3 Le 30/08/2018, à 18:58
- Caribou22
Re : [ RESOLU ] Probleme installation Asus GL742VW
Bonjour et bienvenue 
Sans doute un problème lié à ta carte graphique nVidia.
Peux-tu ouvrir un terminal (Ctrl+Alt+T) et nous donner le retour de cette commande ?
lspciPour nous envoyer le retour du terminal ici :
xubu1957 a écrit :
Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message
https://pix.debian-fr.xyz/upload/img/1535555994.png
comme indiqué dans le : Retour utilisable de commande
Hors ligne
#4 Le 30/08/2018, à 20:08
- NicoApi73
Re : [ RESOLU ] Probleme installation Asus GL742VW
Bonjour,
En plus de la carte nVidia (potentiellement), tu as le port pci 1c.0 [8086:a112] qui n'est pas content. Gros comme une maison que c'est ton module WIFI qui est connecté dessus.
Peux tu faire à partir d'une session live (puisque tu arrives à la démarrer) la commande suivante :
sudo lshw -numericPour la carte graphique, tu peux aussi démarrer une session normale en passant modprobe.blacklist=nouveau dans grub au démarrage :
Démarre ton pc, si tu es en dual-boot, grub apparaît pour choisir l'os, si tu as un seul os, tu appuies sur Echap ou Shift (en permanence) dès que la page permettant d’accéder au bios disparaît. Dès que grub apparaît appuyer sur 'e'
- descendre avec les touches (curseur) jusqu'à tomber sur
Linux /boot/vmlinuz.efi...
(si tu es en legacy, le nom diffère un peu)
- avec le curseur, le déplacer pour le mettre après splash.
- écrire "modprobe.blacklist=nouveau" juste après splash, avec un espace entre splash et modprobe... et un espace après nouveau. Remarque, il n'y a aucun espace dans modprobe.blacklist=nouveau (quand le clavier est un clavier AZERTY il faut taper ,odprobe:blqcklist=nouvequ pour que s'affiche modprobe.blacklist=nouveau)
- Bien vérifier que c'est modprobe.blacklist=nouveau qui s'affiche
- valider par F10
Après, comme indiqué par lucmars, tu installes le driver nVidia
Dernière modification par NicoApi73 (Le 30/08/2018, à 20:20)
Hors ligne
#5 Le 30/08/2018, à 20:46
- duf65
Re : [ RESOLU ] Probleme installation Asus GL742VW
Ouhaaa ,
Ca ne rigole pas ici, les réponses sont rapides
Voici le retour après LSPCI
00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #0 (rev 31)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #1 (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)
02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader (rev 01)
03:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)Dernière modification par duf65 (Le 30/08/2018, à 21:14)
Hors ligne
#6 Le 30/08/2018, à 20:50
- duf65
Re : [ RESOLU ] Probleme installation Asus GL742VW
Là je suis en mode " sans echec " Désolé reflexe de windowsiens qui reviennent.
J'ai mal aux yeux avec un écran tout pourri. 
Et je me dis en effet que ça vient de la carte graphique, mais je ne sais pas comment installer de nouveaux pilotes. les liens que je trouvent ne m'aide pas trop. En sashant que ça pique quand même un peu de lire sur cet affichage.
Voici ce que renvoie ta commande Nico :
duf-gl752vw
description: Ordinateur Bloc-notes
produit: GL752VW (ASUS-NotebookSKU)
fabriquant: ASUSTeK COMPUTER INC.
version: 1.0
numéro de série: G6N0CV10U17325D
bits: 64 bits
fonctionnalités: smbios-3.0 dmi-3.0 smp vsyscall32
configuration: boot=normal chassis=notebook family=GL sku=ASUS-NotebookSKU uuid=EE93928D-1FBB-46A4-846C-6AEA3A5BDAA5
*-core
description: Carte mère
produit: GL752VW
fabriquant: ASUSTeK COMPUTER INC.
identifiant matériel: 0
version: 1.0
numéro de série: BSN12345678901234567
emplacement: MIDDLE
*-firmware
description: BIOS
fabriquant: American Megatrends Inc.
identifiant matériel: 0
version: GL752VW.213
date: 03/16/2016
taille: 64KiB
capacité: 5952KiB
fonctionnalités: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification uefi
*-cache:0
description: L1 cache
identifiant matériel: 11
emplacement: L1 Cache
taille: 128KiB
capacité: 128KiB
fonctionnalités: synchronous internal write-back data
configuration: level=1
*-cache:1
description: L1 cache
identifiant matériel: 12
emplacement: L1 Cache
taille: 128KiB
capacité: 128KiB
fonctionnalités: synchronous internal write-back instruction
configuration: level=1
*-cache:2
description: L2 cache
identifiant matériel: 13
emplacement: L2 Cache
taille: 1MiB
capacité: 1MiB
fonctionnalités: synchronous internal write-back unified
configuration: level=2
*-cache:3
description: L3 cache
identifiant matériel: 14
emplacement: L3 Cache
taille: 6MiB
capacité: 6MiB
fonctionnalités: synchronous internal write-back unified
configuration: level=3
*-cpu
description: CPU
produit: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz
fabriquant: Intel Corp.
identifiant matériel: 15
information bus: cpu@0
version: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz
numéro de série: To Be Filled By O.E.M.
emplacement: U3E1
taille: 1766MHz
capacité: 3500MHz
bits: 64 bits
horloge: 100MHz
fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp cpufreq
configuration: cores=4 enabledcores=4 threads=8
*-memory
description: Mémoire Système
identifiant matériel: 16
emplacement: Carte mère
taille: 8GiB
*-bank:0
description: SODIMM DDR4 Synchrone 2133 MHz (0,5 ns)
produit: HMA41GS6AFR8N-TF
fabriquant: SK Hynix
identifiant matériel: 0
numéro de série: 49176837
emplacement: ChannelA-DIMM0
taille: 8GiB
bits: 64 bits
horloge: 2133MHz (0.5ns)
*-bank:1
description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719)Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) [vide]
identifiant matériel: 1
emplacement: ChannelA-DIMM1
*-bank:2
description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719)Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) [vide]
identifiant matériel: 2
emplacement: ChannelB-DIMM0
*-bank:3
description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719)Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) [vide]
identifiant matériel: 3
emplacement: ChannelB-DIMM1
*-pci
description: Host bridge
produit: Skylake Host Bridge/DRAM Registers [8086:1910]
fabriquant: Intel Corporation [8086]
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 07
bits: 32 bits
horloge: 33MHz
configuration: driver=skl_uncore
ressources: irq:0
*-pci:0
description: PCI bridge
produit: Skylake PCIe Controller (x16) [8086:1901]
fabriquant: Intel Corporation [8086]
identifiant matériel: 1
information bus: pci@0000:00:01.0
version: 07
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:122 portE/S:e000(taille=4096) mémoire:de000000-df0fffff portE/S:c0000000(taille=301989888)
*-display NON-RÉCLAMÉ
description: 3D controller
produit: GM107M [GeForce GTX 960M] [10DE:139B]
fabriquant: NVIDIA Corporation [10DE]
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a2
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: latency=0
ressources: mémoire:de000000-deffffff mémoire:c0000000-cfffffff mémoire:d0000000-d1ffffff portE/S:e000(taille=128) mémoire:df000000-df07ffff
*-display NON-RÉCLAMÉ
description: VGA compatible controller
produit: HD Graphics 530 [8086:191B]
fabriquant: Intel Corporation [8086]
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 06
bits: 64 bits
horloge: 33MHz
fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list
configuration: latency=0
ressources: mémoire:dd000000-ddffffff mémoire:b0000000-bfffffff portE/S:f000(taille=64) mémoire:c0000-dffff
*-generic:0
description: Signal processing controller
produit: Skylake Processor Thermal Subsystem [8086:1903]
fabriquant: Intel Corporation [8086]
identifiant matériel: 4
information bus: pci@0000:00:04.0
version: 07
bits: 64 bits
horloge: 33MHz
fonctionnalités: msi pm bus_master cap_list
configuration: driver=proc_thermal latency=0
ressources: irq:16 mémoire:df320000-df327fff
*-usb
description: USB controller
produit: Sunrise Point-H USB 3.0 xHCI Controller [8086:A12F]
fabriquant: Intel Corporation [8086]
identifiant matériel: 14
information bus: pci@0000:00:14.0
version: 31
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
ressources: irq:125 mémoire:df310000-df31ffff
*-usbhost:0
produit: xHCI Host Controller [1D6B:2]
fabriquant: Linux 4.15.0-29-generic xhci-hcd [1D6B]
identifiant matériel: 0
information bus: usb@1
nom logique: usb1
version: 4.15
fonctionnalités: usb-2.00
configuration: driver=hub slots=16 speed=480Mbit/s
*-usb:0
description: Vidéo
produit: USB2.0 HD UVC WebCam [4F2:B450]
fabriquant: Chicony Electronics Co.,Ltd. [4F2]
identifiant matériel: 4
information bus: usb@1:4
version: 69.71
numéro de série: 0x0001
fonctionnalités: usb-2.00
configuration: driver=uvcvideo maxpower=500mA speed=480Mbit/s
*-usb:1
description: Interface sans fil Bluetooth
fabriquant: Intel Corp. [8087]
identifiant matériel: 9
information bus: usb@1:9
version: 0.01
fonctionnalités: bluetooth usb-2.01
configuration: driver=btusb maxpower=100mA speed=12Mbit/s
*-usbhost:1
produit: xHCI Host Controller [1D6B:3]
fabriquant: Linux 4.15.0-29-generic xhci-hcd [1D6B]
identifiant matériel: 1
information bus: usb@2
nom logique: usb2
version: 4.15
fonctionnalités: usb-3.00
configuration: driver=hub slots=8 speed=5000Mbit/s
*-generic:1
description: Signal processing controller
produit: Sunrise Point-H Thermal subsystem [8086:A131]
fabriquant: Intel Corporation [8086]
identifiant matériel: 14.2
information bus: pci@0000:00:14.2
version: 31
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=intel_pch_thermal latency=0
ressources: irq:18 mémoire:df338000-df338fff
*-generic:2
description: Signal processing controller
produit: Sunrise Point-H Serial IO I2C Controller #0 [8086:A160]
fabriquant: Intel Corporation [8086]
identifiant matériel: 15
information bus: pci@0000:00:15.0
version: 31
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: driver=intel-lpss latency=0
ressources: irq:16 mémoire:df337000-df337fff
*-generic:3
description: Signal processing controller
produit: Sunrise Point-H Serial IO I2C Controller #1 [8086:A161]
fabriquant: Intel Corporation [8086]
identifiant matériel: 15.1
information bus: pci@0000:00:15.1
version: 31
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: driver=intel-lpss latency=0
ressources: irq:17 mémoire:df336000-df336fff
*-communication
description: Communication controller
produit: Sunrise Point-H CSME HECI #1 [8086:A13A]
fabriquant: Intel Corporation [8086]
identifiant matériel: 16
information bus: pci@0000:00:16.0
version: 31
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=mei_me latency=0
ressources: irq:129 mémoire:df335000-df335fff
*-storage
description: SATA controller
produit: Sunrise Point-H SATA Controller [AHCI mode] [8086:A103]
fabriquant: Intel Corporation [8086]
identifiant matériel: 17
information bus: pci@0000:00:17.0
version: 31
bits: 32 bits
horloge: 66MHz
fonctionnalités: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
ressources: irq:127 mémoire:df330000-df331fff mémoire:df334000-df3340ff portE/S:f090(taille=8) portE/S:f080(taille=4) portE/S:f060(taille=32) mémoire:df333000-df3337ff
*-pci:1
description: PCI bridge
produit: Sunrise Point-H PCI Express Root Port #3 [8086:A112]
fabriquant: Intel Corporation [8086]
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: f1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:123 mémoire:df200000-df2fffff
*-network
description: Interface réseau sans fil
produit: Wireless 7265 [8086:95A]
fabriquant: Intel Corporation [8086]
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: wlp2s0
version: 59
numéro de série: 48:45:20:c4:7c:3c
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=4.15.0-29-generic firmware=29.1044073957.0 ip=192.168.1.54 latency=0 link=yes multicast=yes wireless=IEEE 802.11
ressources: irq:130 mémoire:df200000-df201fff
*-pci:2
description: PCI bridge
produit: Sunrise Point-H PCI Express Root Port #4 [8086:A113]
fabriquant: Intel Corporation [8086]
identifiant matériel: 1c.3
information bus: pci@0000:00:1c.3
version: f1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:124 portE/S:d000(taille=4096) mémoire:df100000-df1fffff
*-generic
description: Unassigned class
produit: RTL8411B PCI Express Card Reader [10EC:5287]
fabriquant: Realtek Semiconductor Co., Ltd. [10EC]
identifiant matériel: 0
information bus: pci@0000:03:00.0
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list rom
configuration: driver=rtsx_pci latency=0
ressources: irq:126 mémoire:df115000-df115fff mémoire:df100000-df10ffff
*-network
description: Ethernet interface
produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10EC:8168]
fabriquant: Realtek Semiconductor Co., Ltd. [10EC]
identifiant matériel: 0.1
information bus: pci@0000:03:00.1
nom logique: enp3s0f1
version: 12
numéro de série: 70:8b:cd:0c:9e:88
taille: 10Mbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8411-2_0.0.1 07/08/13 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
ressources: irq:19 portE/S:d000(taille=256) mémoire:df114000-df114fff mémoire:df110000-df113fff
*-isa
description: ISA bridge
produit: Sunrise Point-H LPC Controller [8086:A14E]
fabriquant: Intel Corporation [8086]
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 31
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master
configuration: latency=0
*-memory NON-RÉCLAMÉ
description: Memory controller
produit: Sunrise Point-H PMC [8086:A121]
fabriquant: Intel Corporation [8086]
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 31
bits: 32 bits
horloge: 33MHz (30.3ns)
fonctionnalités: bus_master
configuration: latency=0
ressources: mémoire:df32c000-df32ffff
*-multimedia
description: Audio device
produit: Sunrise Point-H HD Audio [8086:A170]
fabriquant: Intel Corporation [8086]
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 31
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=snd_hda_intel latency=32
ressources: irq:131 mémoire:df328000-df32bfff mémoire:df300000-df30ffff
*-serial NON-RÉCLAMÉ
description: SMBus
produit: Sunrise Point-H SMBus [8086:A123]
fabriquant: Intel Corporation [8086]
identifiant matériel: 1f.4
information bus: pci@0000:00:1f.4
version: 31
bits: 64 bits
horloge: 33MHz
configuration: latency=0
ressources: mémoire:df332000-df3320ff portE/S:f040(taille=32)
*-scsi:0
identifiant matériel: 1
nom logique: scsi1
fonctionnalités: emulated
*-cdrom
description: DVD-RAM writer
produit: DVDRAM GUE1N
fabriquant: HL-DT-ST
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/cdrw
nom logique: /dev/dvd
nom logique: /dev/dvdrw
nom logique: /dev/sr0
version: AS00
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-scsi:1
identifiant matériel: 2
nom logique: scsi3
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: HGST HTS721010A9
identifiant matériel: 0.0.0
information bus: scsi@3:0.0.0
nom logique: /dev/sda
version: A3J0
numéro de série: JR10004M1R97VE
taille: 931GiB (1TB)
fonctionnalités: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=b71b6ac9-6e6c-44d9-98e8-d5ce7ad8fde8 logicalsectorsize=512 sectorsize=4096
*-volume:0
description: Windows FAT volume
fabriquant: MSDOS5.0
identifiant matériel: 1
information bus: scsi@3:0.0.0,1
nom logique: /dev/sda1
nom logique: /boot/efi
version: FAT32
numéro de série: d26d-c3b2
taille: 255MiB
capacité: 259MiB
fonctionnalités: boot fat initialized
configuration: FATs=2 filesystem=fat label=SYSTEM mount.fstype=vfat mount.options=rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro name=EFI System Partition state=mounted
*-volume:1
description: reserved partition
fabriquant: Windows
identifiant matériel: 2
information bus: scsi@3:0.0.0,2
nom logique: /dev/sda2
numéro de série: f8ea00ab-827f-4233-b024-bd2e4024b9a6
capacité: 15MiB
fonctionnalités: nofs
configuration: name=Microsoft reserved partition
*-volume:2
description: Windows NTFS volume
fabriquant: Windows
identifiant matériel: 3
information bus: scsi@3:0.0.0,3
nom logique: /dev/sda3
version: 3.1
numéro de série: de33f5bf-c23b-4e4c-ad7b-44925290245a
taille: 293GiB
capacité: 293GiB
fonctionnalités: ntfs initialized
configuration: clustersize=4096 created=2016-06-24 18:49:55 filesystem=ntfs label=OS name=Basic data partition state=clean
*-volume:3
description: Windows NTFS volume
fabriquant: Windows
identifiant matériel: 4
information bus: scsi@3:0.0.0,4
nom logique: /dev/sda4
version: 3.1
numéro de série: 0eb8d237-84c1-6c43-9fff-e5483eba5a3a
taille: 558GiB
capacité: 558GiB
fonctionnalités: ntfs initialized
configuration: clustersize=4096 created=2016-06-24 21:18:09 filesystem=ntfs label=DATA modified_by_chkdsk=true mounted_on_nt4=true name=Basic data partition resize_log_file=true state=dirty upgrade_on_mount=true
*-volume:4
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 5
information bus: scsi@3:0.0.0,5
nom logique: /dev/sda5
nom logique: /
version: 1.0
numéro de série: 6eacab0d-12f3-4ad9-ae7c-1176a0706a45
taille: 78GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
configuration: created=2018-08-29 16:40:37 filesystem=ext4 lastmountpoint=/ modified=2018-08-30 20:23:53 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2018-08-30 20:24:09 state=mountedDernière modification par duf65 (Le 30/08/2018, à 21:15)
Hors ligne
#7 Le 30/08/2018, à 20:52
- duf65
Re : [ RESOLU ] Probleme installation Asus GL742VW
Et pour information ma carte graphque est une GEforce GTX 960M
Hors ligne
#8 Le 30/08/2018, à 21:10
- NicoApi73
Re : [ RESOLU ] Probleme installation Asus GL742VW
Installe le driver nVidia.
Peux tu mettre tes retours entre balises code STP.
C'est bien le port pci sur lequel est connecté le module WIFI qui n'est pas content :
*-pci:1
description: PCI bridge
produit: Sunrise Point-H PCI Express Root Port #3 [8086:A112]
fabriquant: Intel Corporation [8086]
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: f1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:123 mémoire:df200000-df2fffff
*-network
description: Interface réseau sans fil
produit: Wireless 7265 [8086:95A]
fabriquant: Intel Corporation [8086]
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: wlp2s0
version: 59
numéro de série: 48:45:20:c4:7c:3c
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=4.15.0-29-generic firmware=29.1044073957.0 ip=192.168.1.54 latency=0 link=yes multicast=yes wireless=IEEE 802.11
ressources: irq:130 mémoire:df200000-df201fffDans une session, soit live, soit normale, peux tu faire
dmesg -lerr | tail -50STP
Je pense qu'il est préférable de passer pci=noaer à grub, le retour ci-dessus le confirmera.
Hors ligne
#9 Le 30/08/2018, à 21:12
- xubu1957
Re : [ RESOLU ] Probleme installation Asus GL742VW
Pour ajouter toi-même les balises code à tes précédents messages #5 et #6 : Merci 
Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message
comme indiqué dans le : Retour utilisable de commande
_ _ _
alca94 a écrit :
Dernière modification par xubu1957 (Le 06/01/2019, à 10:45)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#10 Le 30/08/2018, à 21:19
- duf65
Re : [ RESOLU ] Probleme installation Asus GL742VW
Merci, je viens de le faire ( depuis windows ) mais tout à l'heure c'était pas évident, je ne voyais vraiment pas grand chose.
Comme je le disais, je veux bien essayer d'installer les pilotes Nvidia, mais je n'ai pas trouvé ( encore ) de méthode qui semble fonctionner.
JE vais lancer la commande de Nico et je vois ce que ça donne.
Et nico, tu me conseilles de modifier le Grub, mais je n'ai pas compris exactement ce que je dois faire. Je repars dans les années 80 et je reviens vers vous.
Encore merci
Hors ligne
#11 Le 30/08/2018, à 21:23
- NicoApi73
Re : [ RESOLU ] Probleme installation Asus GL742VW
ok, je vais t'expliciter ça.
Pour le pilote nVidia, tu vas dans Gestionnaire de mise à jour, paramètres, Pilotes additionnels. Tu attends qu'il charge les propositions et tu sélectionnes le pilote propriétaire nVidia (ce doit toujours être le 390). Ce ne sera pas lui qui est sélectionné par défaut.
Donne le retour de dmesg et ensuite je t'indiquerai comment le mettre dans grub. (ce n'est pas du chantage, c'est que si tu le mets et qu'ensuite tu fais dmesg, l'erreur et surtout sa récurrence, n'apparaitront plus )
Dernière modification par NicoApi73 (Le 30/08/2018, à 21:24)
Hors ligne
#12 Le 30/08/2018, à 21:23
- duf65
Re : [ RESOLU ] Probleme installation Asus GL742VW
voici le retour :
[ 0.896233] Couldn't get size: 0x800000000000000e
[ 0.896597] MODSIGN: Couldn't get UEFI db list
[ 17.696216] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 17.696219] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80Hors ligne
#13 Le 30/08/2018, à 21:26
- NicoApi73
Re : [ RESOLU ] Probleme installation Asus GL742VW
Ca, tu as dû le faire à partir du mode recovery, ça ne correspond pas à la photo que tu as prise au post #1.
Occupe toi du driver nVidia, lance une session normale et donne ensuite le retour de dmesg
Hors ligne
#14 Le 30/08/2018, à 21:46
- duf65
Re : [ RESOLU ] Probleme installation Asus GL742VW
Enfin je peux regarder mon écran sans cligner des yeux ! !
En effet, la première fois que je suis allé sur les pilotes, je n'avais aucune proposition. Mais la seconde fois j'ai pu choisir le pilote nvidia.
J'ai tout tapé en mode recovery depuis tout à lheure, mais voici le retour en mode normal :
[ 0.974257] Couldn't get size: 0x800000000000000e
[ 0.974259] MODSIGN: Couldn't get UEFI db list
[ 1.625625] PKCS#7 signature not signed with a trusted key
[ 1.641929] PKCS#7 signature not signed with a trusted key
[ 1.643532] PKCS#7 signature not signed with a trusted key
[ 7.256557] PKCS#7 signature not signed with a trusted key
[ 7.427694] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 7.427699] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80pour les modifications, je tiens juste à préciser que je suis un débutant sur linux mais que j'ai déjà tapé quelques lignes de commande dans ma vie sans être un vrai informaticien ( ) Je n'ai pas bien compris ce que tu voulais que je modifie et depuis la console ? ? ( dont je ne maitrise pas encore toutes les commandes de base j'avoue )
En tout cas là, ça a l'air de fonctionner à peu prés
Hors ligne
#15 Le 30/08/2018, à 21:51
- NicoApi73
Re : [ RESOLU ] Probleme installation Asus GL742VW
Tu n'as plus les erreurs de tout à l'heure. Pour l'instant ne fais rien de plus. Si tu constates que le répertoire /var/log grossit, ouvre un fil.....
Hors ligne
#16 Le 30/08/2018, à 21:52
- duf65
Re : [ RESOLU ] Probleme installation Asus GL742VW
tu voulais peut être ça en fait :
[ 0.000000] microcode: microcode updated early to revision 0xc6, date = 2018-04-17
[ 0.000000] Linux version 4.15.0-33-generic (buildd@lcy01-amd64-024) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #36-Ubuntu SMP Wed Aug 15 16:00:05 UTC 2018 (Ubuntu 4.15.0-33.36-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=6eacab0d-12f3-4ad9-ae7c-1176a0706a45 ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000072db3fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000072db4000-0x0000000072db4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000072db5000-0x0000000072dfefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000072dff000-0x0000000072e50fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000072e51000-0x0000000073291fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000073292000-0x0000000075d16fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000075d17000-0x00000000767a7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000767a8000-0x0000000076a01fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000076a02000-0x00000000773a5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000773a6000-0x0000000077f87fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000077f88000-0x0000000077ffdfff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000077ffe000-0x0000000077ffefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000283ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ESRT=0x77ec6e18 ACPI=0x76b0a000 ACPI 2.0=0x76b0a000 SMBIOS=0x778e0000 SMBIOS 3.0=0x778df000
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. GL752VW/GL752VW, BIOS GL752VW.213 03/16/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x284000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007A000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 0079000000 mask 7FFF000000 uncachable
[ 0.000000] 4 base 0078800000 mask 7FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x77fff max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x0000000077ec6e18 to 0x0000000077ec6e50.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x136d3f000, 0x136d3ffff] PGTABLE
[ 0.000000] BRK [0x136d40000, 0x136d40fff] PGTABLE
[ 0.000000] BRK [0x136d41000, 0x136d41fff] PGTABLE
[ 0.000000] BRK [0x136d42000, 0x136d42fff] PGTABLE
[ 0.000000] BRK [0x136d43000, 0x136d43fff] PGTABLE
[ 0.000000] BRK [0x136d44000, 0x136d44fff] PGTABLE
[ 0.000000] BRK [0x136d45000, 0x136d45fff] PGTABLE
[ 0.000000] BRK [0x136d46000, 0x136d46fff] PGTABLE
[ 0.000000] BRK [0x136d47000, 0x136d47fff] PGTABLE
[ 0.000000] BRK [0x136d48000, 0x136d48fff] PGTABLE
[ 0.000000] BRK [0x136d49000, 0x136d49fff] PGTABLE
[ 0.000000] BRK [0x136d4a000, 0x136d4afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x30591000-0x342bffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000076B0A000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x0000000076B0A0A8 0000D4 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x0000000076B2FC98 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x0000000076B0A210 025A85 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000773A4F80 000040
[ 0.000000] ACPI: APIC 0x0000000076B2FDA8 0000BC (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x0000000076B2FE68 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x0000000076B2FEB0 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x0000000076B2FF50 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x0000000076B2FF90 000038 (v01 _ASUS_ Notebook 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x0000000076B2FFC8 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: ECDT 0x0000000076B302E0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: LPIT 0x0000000076B303A8 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x0000000076B30440 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x0000000076B30688 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x0000000076B306C0 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x0000000076B30718 003D2D (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000076B34448 006685 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x0000000076B3AAD0 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x0000000076B3AB18 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: BGRT 0x0000000076B3B970 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x0000000076B3B9A8 0000A5 (v02 SgRef SgPeg 00001000 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x0000000076B3BA50 0000F0 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: TPM2 0x0000000076B3BB40 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.000000] ACPI: SSDT 0x0000000076B3BB78 001A3F (v01 OptRef OptTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: MSDM 0x0000000076541F18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000283ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x283fd4000-0x283ffefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000283ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000072db3fff]
[ 0.000000] node 0: [mem 0x0000000072dff000-0x0000000072e50fff]
[ 0.000000] node 0: [mem 0x0000000073292000-0x0000000075d16fff]
[ 0.000000] node 0: [mem 0x00000000767a8000-0x0000000076a01fff]
[ 0.000000] node 0: [mem 0x0000000077ffe000-0x0000000077ffefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000283ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000283ffffff]
[ 0.000000] On node 0 totalpages: 2071170
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7468 pages used for memmap
[ 0.000000] DMA32 zone: 477926 pages, LIFO batch:31
[ 0.000000] Normal zone: 24832 pages used for memmap
[ 0.000000] Normal zone: 1589248 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] Reserving Intel graphics memory at 0x0000000079000000-0x000000007affffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x72db4000-0x72db4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x72db5000-0x72dfefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x72e51000-0x73291fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x75d17000-0x767a7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x76a02000-0x773a5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x773a6000-0x77f87fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77f88000-0x77ffdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77fff000-0x77ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79000000-0x7affffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x7b000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2038784
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=6eacab0d-12f3-4ad9-ae7c-1176a0706a45 ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7937800K/8284680K available (12300K kernel code, 2470K rwdata, 4244K rodata, 2408K init, 2416K bss, 346880K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39121 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] DMAR: Host address width 39
[ 0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0501e
[ 0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.004000] DMAR: RMRR base: 0x00000076521000 end: 0x00000076540fff
[ 0.004000] DMAR: RMRR base: 0x00000078800000 end: 0x0000007affffff
[ 0.004000] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.004000] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.004000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.004000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.004000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.004000] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.004000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028000] tsc: Detected 2600.000 MHz processor
[ 0.028000] tsc: Detected 2592.000 MHz TSC
[ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5184.00 BogoMIPS (lpj=10368000)
[ 0.028000] pid_max: default: 32768 minimum: 301
[ 0.028000] Security Framework initialized
[ 0.028000] Yama: becoming mindful.
[ 0.028000] AppArmor: AppArmor initialized
[ 0.028000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.028000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.028000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.028000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.028000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.028000] mce: CPU supports 10 MCE banks
[ 0.028000] CPU0: Thermal monitoring enabled (TM1)
[ 0.028000] process: using mwait in idle threads
[ 0.028000] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.028000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.028000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.028000] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.028000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.028000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.028000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.038223] Freeing SMP alternatives memory: 36K
[ 0.041184] TSC deadline timer enabled
[ 0.041188] smpboot: CPU0: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.041238] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.041263] ... version: 4
[ 0.041263] ... bit width: 48
[ 0.041264] ... generic registers: 4
[ 0.041264] ... value mask: 0000ffffffffffff
[ 0.041265] ... max period: 00007fffffffffff
[ 0.041265] ... fixed-purpose events: 3
[ 0.041265] ... event mask: 000000070000000f
[ 0.041296] Hierarchical SRCU implementation.
[ 0.042269] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.042278] smp: Bringing up secondary CPUs ...
[ 0.042326] x86: Booting SMP configuration:
[ 0.042327] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.048005] smp: Brought up 1 node, 8 CPUs
[ 0.048006] smpboot: Max logical packages: 1
[ 0.048007] smpboot: Total of 8 processors activated (41472.00 BogoMIPS)
[ 0.052242] devtmpfs: initialized
[ 0.052242] x86/mm: Memory block size: 128MB
[ 0.052571] evm: security.selinux
[ 0.052572] evm: security.SMACK64
[ 0.052572] evm: security.SMACK64EXEC
[ 0.052573] evm: security.SMACK64TRANSMUTE
[ 0.052573] evm: security.SMACK64MMAP
[ 0.052573] evm: security.apparmor
[ 0.052574] evm: security.ima
[ 0.052574] evm: security.capability
[ 0.052585] PM: Registering ACPI NVS region [mem 0x72db4000-0x72db4fff] (4096 bytes)
[ 0.052585] PM: Registering ACPI NVS region [mem 0x76a02000-0x773a5fff] (10108928 bytes)
[ 0.052585] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.052585] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.052585] pinctrl core: initialized pinctrl subsystem
[ 0.052585] RTC time: 19:38:27, date: 08/30/18
[ 0.053088] NET: Registered protocol family 16
[ 0.053161] audit: initializing netlink subsys (disabled)
[ 0.053166] audit: type=2000 audit(1535657907.052:1): state=initialized audit_enabled=0 res=1
[ 0.053166] cpuidle: using governor ladder
[ 0.053166] cpuidle: using governor menu
[ 0.053166] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.053166] ACPI: bus type PCI registered
[ 0.053166] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.053166] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.053166] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.053166] PCI: Using configuration type 1 for base access
[ 0.053166] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.053166] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.053166] ACPI: Added _OSI(Module Device)
[ 0.053166] ACPI: Added _OSI(Processor Device)
[ 0.053166] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.053166] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.053166] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.056004] ACPI: EC: EC started
[ 0.056004] ACPI: EC: interrupt blocked
[ 0.058037] ACPI: \: Used as first EC
[ 0.058038] ACPI: \: GPE=0x23, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.058039] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.058751] ACPI: Executed 22 blocks of module-level executable AML code
[ 0.073010] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.079677] ACPI: Dynamic OEM Table Load:
[ 0.079683] ACPI: SSDT 0xFFFF8B6F7985F800 0005DC (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.080107] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.081548] ACPI: Dynamic OEM Table Load:
[ 0.081553] ACPI: SSDT 0xFFFF8B6F79BBD800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.081923] ACPI: Dynamic OEM Table Load:
[ 0.081926] ACPI: SSDT 0xFFFF8B6F798539C0 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20120913)
[ 0.082212] ACPI: Dynamic OEM Table Load:
[ 0.082215] ACPI: SSDT 0xFFFF8B6F79B6CA00 000130 (v02 PmRef HwpLvt 00003000 INTL 20120913)
[ 0.083274] ACPI: Dynamic OEM Table Load:
[ 0.083279] ACPI: SSDT 0xFFFF8B6F7985E000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.083923] ACPI: Dynamic OEM Table Load:
[ 0.083926] ACPI: SSDT 0xFFFF8B6F79B6E400 000119 (v02 PmRef ApHwp 00003000 INTL 20120913)
[ 0.084304] ACPI: Dynamic OEM Table Load:
[ 0.084308] ACPI: SSDT 0xFFFF8B6F79B6F800 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.089620] ACPI: Interpreter enabled
[ 0.089655] ACPI: (supports S0 S3 S4 S5)
[ 0.089656] ACPI: Using IOAPIC for interrupt routing
[ 0.089688] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.090301] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.092954] ACPI: Power Resource [PG00] (on)
[ 0.121683] ACPI: Power Resource [PG01] (on)
[ 0.122163] ACPI: Power Resource [PG02] (on)
[ 0.123009] ACPI: Power Resource [WRST] (off)
[ 0.123430] ACPI: Power Resource [WRST] (off)
[ 0.123845] ACPI: Power Resource [WRST] (off)
[ 0.124259] ACPI: Power Resource [WRST] (off)
[ 0.124670] ACPI: Power Resource [WRST] (off)
[ 0.125085] ACPI: Power Resource [WRST] (off)
[ 0.125466] ACPI: Power Resource [WRST] (off)
[ 0.126106] ACPI: Power Resource [WRST] (off)
[ 0.126491] ACPI: Power Resource [WRST] (off)
[ 0.126884] ACPI: Power Resource [WRST] (off)
[ 0.127244] ACPI: Power Resource [WRST] (off)
[ 0.127603] ACPI: Power Resource [WRST] (off)
[ 0.127959] ACPI: Power Resource [WRST] (off)
[ 0.128317] ACPI: Power Resource [WRST] (off)
[ 0.128673] ACPI: Power Resource [WRST] (off)
[ 0.129030] ACPI: Power Resource [WRST] (off)
[ 0.129389] ACPI: Power Resource [WRST] (off)
[ 0.129744] ACPI: Power Resource [WRST] (off)
[ 0.130101] ACPI: Power Resource [WRST] (off)
[ 0.130462] ACPI: Power Resource [WRST] (off)
[ 0.142569] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.142574] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.144157] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.144158] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.144759] PCI host bridge to bus 0000:00
[ 0.144761] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.144762] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.144763] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.144764] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.144765] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.144766] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.144767] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.144768] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.144769] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.144770] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.144771] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.144772] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.144773] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.144774] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.144774] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.144775] pci_bus 0000:00: root bus resource [mem 0x7b000000-0xdfffffff window]
[ 0.144776] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.144778] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.144784] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[ 0.144893] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.144928] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.145103] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[ 0.145112] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[ 0.145117] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.145120] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.145132] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.145247] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.145257] pci 0000:00:04.0: reg 0x10: [mem 0xdf320000-0xdf327fff 64bit]
[ 0.145452] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.145471] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[ 0.145529] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.145657] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.145676] pci 0000:00:14.2: reg 0x10: [mem 0xdf338000-0xdf338fff 64bit]
[ 0.145862] pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
[ 0.145939] pci 0000:00:15.0: reg 0x10: [mem 0xdf337000-0xdf337fff 64bit]
[ 0.146342] pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
[ 0.146432] pci 0000:00:15.1: reg 0x10: [mem 0xdf336000-0xdf336fff 64bit]
[ 0.146770] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.146793] pci 0000:00:16.0: reg 0x10: [mem 0xdf335000-0xdf335fff 64bit]
[ 0.146860] pci 0000:00:16.0: PME# supported from D3hot
[ 0.147004] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[ 0.147019] pci 0000:00:17.0: reg 0x10: [mem 0xdf330000-0xdf331fff]
[ 0.147025] pci 0000:00:17.0: reg 0x14: [mem 0xdf334000-0xdf3340ff]
[ 0.147031] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.147037] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.147043] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.147050] pci 0000:00:17.0: reg 0x24: [mem 0xdf333000-0xdf3337ff]
[ 0.147084] pci 0000:00:17.0: PME# supported from D3hot
[ 0.147221] pci 0000:00:1c.0: [8086:a112] type 01 class 0x060400
[ 0.147280] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.147442] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[ 0.147502] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.147680] pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
[ 0.147901] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.147916] pci 0000:00:1f.2: reg 0x10: [mem 0xdf32c000-0xdf32ffff]
[ 0.148086] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.148111] pci 0000:00:1f.3: reg 0x10: [mem 0xdf328000-0xdf32bfff 64bit]
[ 0.148141] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[ 0.148186] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.148377] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.148438] pci 0000:00:1f.4: reg 0x10: [mem 0xdf332000-0xdf3320ff 64bit]
[ 0.148509] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.148741] pci 0000:01:00.0: [10de:139b] type 00 class 0x030200
[ 0.148767] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.148783] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.148799] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.148809] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.148820] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.160017] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.160019] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.160022] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.160025] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.160388] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.160485] pci 0000:02:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
[ 0.160761] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.172169] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.172173] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.172246] pci 0000:03:00.0: [10ec:5287] type 00 class 0xff0000
[ 0.172274] pci 0000:03:00.0: reg 0x10: [mem 0xdf115000-0xdf115fff]
[ 0.172330] pci 0000:03:00.0: reg 0x30: [mem 0xdf100000-0xdf10ffff pref]
[ 0.172415] pci 0000:03:00.0: supports D1 D2
[ 0.172417] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.172558] pci 0000:03:00.1: [10ec:8168] type 00 class 0x020000
[ 0.172585] pci 0000:03:00.1: reg 0x10: [io 0xd000-0xd0ff]
[ 0.172610] pci 0000:03:00.1: reg 0x18: [mem 0xdf114000-0xdf114fff 64bit]
[ 0.172626] pci 0000:03:00.1: reg 0x20: [mem 0xdf110000-0xdf113fff 64bit]
[ 0.172715] pci 0000:03:00.1: supports D1 D2
[ 0.172717] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184029] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.184031] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.184034] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.186693] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.186761] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.186829] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.186895] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.186959] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.187024] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.187088] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.187152] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.187912] ACPI: EC: interrupt unblocked
[ 0.187925] ACPI: EC: event unblocked
[ 0.187937] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x23, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.187938] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.188111] SCSI subsystem initialized
[ 0.188123] libata version 3.00 loaded.
[ 0.188123] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.188123] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.188123] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.188123] vgaarb: loaded
[ 0.188123] ACPI: bus type USB registered
[ 0.188123] usbcore: registered new interface driver usbfs
[ 0.188123] usbcore: registered new interface driver hub
[ 0.188123] usbcore: registered new device driver usb
[ 0.188123] EDAC MC: Ver: 3.0.0
[ 0.188265] Registered efivars operations
[ 0.192021] PCI: Using ACPI for IRQ routing
[ 0.216780] PCI: pci_cache_line_size set to 64 bytes
[ 0.217136] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.217137] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.217138] e820: reserve RAM buffer [mem 0x72db4000-0x73ffffff]
[ 0.217139] e820: reserve RAM buffer [mem 0x72e51000-0x73ffffff]
[ 0.217140] e820: reserve RAM buffer [mem 0x75d17000-0x77ffffff]
[ 0.217141] e820: reserve RAM buffer [mem 0x76a02000-0x77ffffff]
[ 0.217142] e820: reserve RAM buffer [mem 0x77fff000-0x77ffffff]
[ 0.217218] NetLabel: Initializing
[ 0.217218] NetLabel: domain hash size = 128
[ 0.217219] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.217228] NetLabel: unlabeled traffic allowed by default
[ 0.220292] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.220296] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.222341] clocksource: Switched to clocksource hpet
[ 0.228435] VFS: Disk quotas dquot_6.6.0
[ 0.228446] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.228521] AppArmor: AppArmor Filesystem Enabled
[ 0.228538] pnp: PnP ACPI init
[ 0.228845] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.228846] system 00:00: [io 0xffff] has been reserved
[ 0.228848] system 00:00: [io 0xffff] has been reserved
[ 0.228849] system 00:00: [io 0xffff] has been reserved
[ 0.228850] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.228851] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.228855] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228937] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.228939] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228957] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.228989] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.228992] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.229112] system 00:04: [io 0x0240-0x0259] has been reserved
[ 0.229115] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229152] pnp 00:05: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.229321] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.229322] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.229324] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.229325] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.229326] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.229327] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.229328] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.229330] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.229331] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.229332] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.229335] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229370] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.229371] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.229372] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.229374] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.229375] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.229376] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.229377] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.229380] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229677] system 00:08: [io 0xff00-0xfffe] has been reserved
[ 0.229680] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230888] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.230889] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.230891] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.230893] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.231803] pnp: PnP ACPI: found 10 devices
[ 0.239758] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.239776] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.239778] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.239780] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.239782] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.239785] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.239788] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.239793] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.239794] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.239797] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.239803] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.239804] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.239805] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.239806] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.239807] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.239808] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.239809] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.239810] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.239811] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.239812] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.239813] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.239814] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.239815] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.239816] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.239817] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.239818] pci_bus 0000:00: resource 19 [mem 0x7b000000-0xdfffffff window]
[ 0.239819] pci_bus 0000:00: resource 20 [mem 0xfd000000-0xfe7fffff window]
[ 0.239820] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.239821] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.239822] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.239823] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.239824] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.239825] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
[ 0.239965] NET: Registered protocol family 2
[ 0.240128] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.240231] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.240375] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.240403] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.240424] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.240468] NET: Registered protocol family 1
[ 0.240477] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.240864] PCI: CLS 0 bytes, default 64
[ 0.240887] Unpacking initramfs...
[ 0.931538] Freeing initrd memory: 62652K
[ 0.931594] DMAR: ACPI device "device:72" under DMAR at fed91000 as 00:15.0
[ 0.931596] DMAR: ACPI device "device:73" under DMAR at fed91000 as 00:15.1
[ 0.931607] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.931609] software IO TLB [mem 0x6dd67000-0x71d67000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.931927] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
[ 0.932216] Scanning for low memory corruption every 60 seconds
[ 0.932841] Initialise system trusted keyrings
[ 0.932847] Key type blacklist registered
[ 0.932913] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.933809] zbud: loaded
[ 0.934228] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.934393] fuse init (API version 7.26)
[ 0.936939] Key type asymmetric registered
[ 0.936940] Asymmetric key parser 'x509' registered
[ 0.936961] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.937019] io scheduler noop registered
[ 0.937020] io scheduler deadline registered
[ 0.937063] io scheduler cfq registered (default)
[ 0.937809] pcieport 0000:00:1c.0: AER enabled with IRQ 123
[ 0.937826] pcieport 0000:00:1c.3: AER enabled with IRQ 124
[ 0.937836] pcieport 0000:00:01.0: Signaling PME with IRQ 122
[ 0.937843] pcieport 0000:00:1c.0: Signaling PME with IRQ 123
[ 0.937852] pcieport 0000:00:1c.3: Signaling PME with IRQ 124
[ 0.937900] efifb: probing for efifb
[ 0.937909] efifb: framebuffer at 0xb0000000, using 1920k, total 1920k
[ 0.937910] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.937910] efifb: scrolling: redraw
[ 0.937911] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.937987] Console: switching to colour frame buffer device 100x37
[ 0.937995] fb0: EFI VGA frame buffer device
[ 0.938000] intel_idle: MWAIT substates: 0x11142120
[ 0.938001] intel_idle: v0.4.1 model 0x5E
[ 0.938377] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.938504] ACPI: AC Adapter [AC0] (on-line)
[ 0.938550] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.938558] ACPI: Lid Switch [LID]
[ 0.938579] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.938627] ACPI: Sleep Button [SLPB]
[ 0.938647] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.938690] ACPI: Power Button [PWRF]
[ 0.940901] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.941017] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.941018] ACPI: Thermal Zone [THRM] (71 C)
[ 0.941160] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.943682] Linux agpgart interface v0.103
[ 0.951389] ACPI: Battery Slot [BAT0] (battery present)
[ 0.953551] loop: module loaded
[ 0.953661] libphy: Fixed MDIO Bus: probed
[ 0.953662] tun: Universal TUN/TAP device driver, 1.6
[ 0.953702] PPP generic driver version 2.4.2
[ 0.953748] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.953749] ehci-pci: EHCI PCI platform driver
[ 0.953754] ehci-platform: EHCI generic platform driver
[ 0.953760] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.953760] ohci-pci: OHCI PCI platform driver
[ 0.953765] ohci-platform: OHCI generic platform driver
[ 0.953768] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.953867] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.953870] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.954938] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.954942] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.955055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.955056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.955057] usb usb1: Product: xHCI Host Controller
[ 0.955058] usb usb1: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
[ 0.955059] usb usb1: SerialNumber: 0000:00:14.0
[ 0.955211] hub 1-0:1.0: USB hub found
[ 0.955226] hub 1-0:1.0: 16 ports detected
[ 0.956098] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.956101] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.956102] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.956129] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.956130] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.956131] usb usb2: Product: xHCI Host Controller
[ 0.956132] usb usb2: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
[ 0.956133] usb usb2: SerialNumber: 0000:00:14.0
[ 0.956300] hub 2-0:1.0: USB hub found
[ 0.956309] hub 2-0:1.0: 8 ports detected
[ 0.956456] usb: port power management may be unreliable
[ 0.956805] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[ 0.956805] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.958060] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.958292] mousedev: PS/2 mouse device common for all mice
[ 0.958696] rtc_cmos 00:02: RTC can wake from S4
[ 0.959093] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.959197] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.959201] i2c /dev entries driver
[ 0.959234] device-mapper: uevent: version 1.0.3
[ 0.959308] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.959310] intel_pstate: Intel P-state driver initializing
[ 0.960524] intel_pstate: HWP enabled
[ 0.961167] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.961168] EFI Variables Facility v0.08 2004-May-17
[ 0.965566] intel_pmc_core: initialized
[ 0.965811] NET: Registered protocol family 10
[ 0.970214] Segment Routing with IPv6
[ 0.970226] NET: Registered protocol family 17
[ 0.970519] Key type dns_resolver registered
[ 0.971688] RAS: Correctable Errors collector initialized.
[ 0.971766] microcode: sig=0x506e3, pf=0x20, revision=0xc6
[ 0.972080] microcode: Microcode Update Driver: v2.2.
[ 0.972086] sched_clock: Marking stable (972077531, 0)->(951752911, 20324620)
[ 0.972466] registered taskstats version 1
[ 0.972472] Loading compiled-in X.509 certificates
[ 0.974153] Loaded X.509 cert 'Build time autogenerated kernel key: b2b2adbda3eef7b219e699c1b87c022096150517'
[ 0.974257] Couldn't get size: 0x800000000000000e
[ 0.974259] MODSIGN: Couldn't get UEFI db list
[ 0.975662] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[ 0.975946] zswap: loaded using pool lzo/zbud
[ 0.978422] Key type big_key registered
[ 0.978425] Key type trusted registered
[ 0.979559] Key type encrypted registered
[ 0.979560] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.979562] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.979572] evm: HMAC attrs: 0x1
[ 0.980724] Magic number: 14:863:648
[ 0.980774] acpi LNXCPU:01: hash matches
[ 0.980962] rtc_cmos 00:02: setting system clock to 2018-08-30 19:38:28 UTC (1535657908)
[ 0.981203] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.981203] EDD information not available.
[ 1.300082] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 1.399188] Freeing unused kernel memory: 2408K
[ 1.416278] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.428285] Write protecting the kernel read-only data: 20480k
[ 1.429595] Freeing unused kernel memory: 2008K
[ 1.432202] Freeing unused kernel memory: 1900K
[ 1.436519] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.436519] x86/mm: Checking user space page tables
[ 1.440647] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.508710] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.510068] ipmi message handler version 39.2
[ 1.511239] ipmi device interface
[ 1.511902] ahci 0000:00:17.0: version 3.0
[ 1.512186] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.512189] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ 1.512819] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.512825] r8169 0000:03:00.1: can't disable ASPM; OS doesn't have ASPM control
[ 1.518672] usb 1-4: New USB device found, idVendor=04f2, idProduct=b450
[ 1.518674] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.518676] usb 1-4: Product: USB2.0 HD UVC WebCam
[ 1.518677] usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.518678] usb 1-4: SerialNumber: 0x0001
[ 1.529242] r8169 0000:03:00.1 eth0: RTL8411 at 0x (ptrval), 70:8b:cd:0c:9e:88, XID 1c800800 IRQ 128
[ 1.529244] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.549374] r8169 0000:03:00.1 enp3s0f1: renamed from eth0
[ 1.552624] scsi host0: ahci
[ 1.553627] scsi host1: ahci
[ 1.556052] scsi host2: ahci
[ 1.556187] scsi host3: ahci
[ 1.556227] ata1: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333100 irq 127
[ 1.556230] ata2: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333180 irq 127
[ 1.556235] ata3: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333200 irq 127
[ 1.556239] ata4: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333280 irq 127
[ 1.572082] [drm] Memory usable by graphics device = 4096M
[ 1.572084] checking generic (b0000000 1e0000) vs hw (b0000000 10000000)
[ 1.572085] fb: switching to inteldrmfb from EFI VGA
[ 1.572117] Console: switching to colour dummy device 80x25
[ 1.572344] [drm] Replacing VGA console driver
[ 1.578216] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.578217] [drm] Driver supports precise vblank timestamp query.
[ 1.580163] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.580545] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[ 1.589135] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 1.625625] PKCS#7 signature not signed with a trusted key
[ 1.625633] nvidia: loading out-of-tree module taints kernel.
[ 1.625637] nvidia: module license 'NVIDIA' taints kernel.
[ 1.625638] Disabling lock debugging due to kernel taint
[ 1.627947] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.629446] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1.634232] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.634351] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 1.634371] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input5
[ 1.635643] nvidia-nvlink: Nvlink Core is being initialized, major device number 241
[ 1.635976] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.48 Thu Mar 22 00:42:57 PDT 2018 (using threaded interrupts)
[ 1.641929] PKCS#7 signature not signed with a trusted key
[ 1.643097] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.48 Wed Mar 21 23:48:34 PDT 2018
[ 1.643532] PKCS#7 signature not signed with a trusted key
[ 1.644045] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 1.644047] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[ 1.648050] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[ 1.659542] fbcon: inteldrmfb (fb0) is primary device
[ 1.659594] Console: switching to colour frame buffer device 200x56
[ 1.659609] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.798903] usb 1-9: New USB device found, idVendor=8087, idProduct=0a2a
[ 1.798904] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.870793] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.870834] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.870883] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.870902] ata1: SATA link down (SStatus 4 SControl 300)
[ 1.872557] ata4.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
[ 1.872559] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.872910] ata2.00: ATAPI: HL-DT-ST DVDRAM GUE1N, AS00, max UDMA/133
[ 1.874336] ata4.00: configured for UDMA/133
[ 1.875992] ata2.00: configured for UDMA/133
[ 1.882825] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE1N AS00 PQ: 0 ANSI: 5
[ 1.948632] clocksource: Switched to clocksource tsc
[ 1.950293] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.950295] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.950582] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.950692] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.951162] scsi 3:0:0:0: Direct-Access ATA HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
[ 1.951476] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.951765] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.951766] sd 3:0:0:0: [sda] 4096-byte physical blocks
[ 1.951838] sd 3:0:0:0: [sda] Write Protect is off
[ 1.951839] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.951952] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.023279] sda: sda1 sda2 sda3 sda4 sda5
[ 2.024394] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.702641] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.742912] random: fast init done
[ 2.748514] [drm] RC6 on
[ 3.580221] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.625141] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.653276] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.672168] systemd[1]: Detected architecture x86-64.
[ 3.672200] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.672208] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.685817] systemd[1]: Set hostname to <duf-GL752VW>.
[ 4.513557] random: crng init done
[ 4.513558] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.017717] systemd[1]: Created slice User and Session Slice.
[ 5.017746] systemd[1]: Reached target User and Group Name Lookups.
[ 5.017902] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.017984] systemd[1]: Created slice System Slice.
[ 5.018068] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.018105] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.018134] systemd[1]: Listening on udev Kernel Socket.
[ 5.413087] lp: driver loaded but no devices found
[ 5.449118] ppdev: user-space parallel port driver
[ 5.507633] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 5.742990] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
[ 5.760204] systemd-journald[298]: Received request to flush runtime journal from PID 1
[ 7.230209] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input6
[ 7.256557] PKCS#7 signature not signed with a trusted key
[ 7.258599] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 240
[ 7.427694] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 7.427699] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 7.526791] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 7.559217] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.602793] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 7.917171] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[ 7.973339] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.973511] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.062069] Intel(R) Wireless WiFi driver for Linux
[ 8.062069] Copyright(c) 2003- 2015 Intel Corporation
[ 8.093625] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 8.093626] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 8.093626] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 8.093627] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 8.093627] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 8.093628] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 8.133212] Bluetooth: Core ver 2.22
[ 8.133223] NET: Registered protocol family 31
[ 8.133223] Bluetooth: HCI device and connection manager initialized
[ 8.133225] Bluetooth: HCI socket layer initialized
[ 8.133227] Bluetooth: L2CAP socket layer initialized
[ 8.133230] Bluetooth: SCO socket layer initialized
[ 8.140015] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 8.162948] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[ 8.370169] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 8.390222] iwlwifi 0000:02:00.0: base HW address: 48:45:20:c4:7c:3c
[ 8.552388] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 8.572035] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 8.572244] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 8.574513] i2c_hid i2c-ELAN1000:00: i2c-ELAN1000:00 supply vdd not found, using dummy regulator
[ 8.575744] elan_i2c i2c-ELAN1000:00: i2c-ELAN1000:00 supply vcc not found, using dummy regulator
[ 8.576782] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 8.595234] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 8.595873] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 8.595894] thermal thermal_zone8: failed to read out thermal zone (-61)
[ 8.613111] usbcore: registered new interface driver btusb
[ 8.627765] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 8.643343] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 8.825563] media: Linux media interface: v0.10
[ 8.828759] Bluetooth: hci0: Intel firmware patch completed and activated
[ 8.864558] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 8.872224] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing.
[ 8.872515] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 8.872517] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.872518] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 8.872519] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 8.872520] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 8.872521] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
[ 8.872522] snd_hda_codec_conexant hdaudioC0D0: Mic=0x18
[ 8.873408] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 8.890688] Linux video capture interface: v2.00
[ 8.897508] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 8.897561] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 8.897625] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 8.897671] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 8.897720] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 8.897778] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 8.897834] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 8.898478] elan_i2c i2c-ELAN1000:00: Elan Touchpad: Module ID: 0x0005, Firmware: 0x0004, Sample: 0x000d, IAP: 0x000e
[ 8.898656] input: Elan Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN1000:00/input/input14
[ 9.031916] AVX2 version of gcm_enc/dec engaged.
[ 9.031917] AES CTR mode by8 optimization enabled
[ 9.082345] asus_wmi: ASUS WMI generic driver loaded
[ 9.094575] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b450)
[ 9.099079] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
[ 9.099080] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
[ 9.099082] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[ 9.099151] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input15
[ 9.099193] usbcore: registered new interface driver uvcvideo
[ 9.099193] USB Video Class driver (1.1.1)
[ 9.288926] asus_wmi: Initialization: 0x1
[ 9.288985] asus_wmi: BIOS WMI version: 7.9
[ 9.289050] asus_wmi: SFUN value: 0xa0077
[ 9.290480] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
[ 9.292203] asus_wmi: Number of fans: 1
[ 10.229033] intel_rapl: Found RAPL domain package
[ 10.229034] intel_rapl: Found RAPL domain core
[ 10.229035] intel_rapl: Found RAPL domain uncore
[ 10.229036] intel_rapl: Found RAPL domain dram
[ 15.384800] audit: type=1400 audit(1535657922.899:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=942 comm="apparmor_parser"
[ 15.385022] audit: type=1400 audit(1535657922.899:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=939 comm="apparmor_parser"
[ 15.414540] audit: type=1400 audit(1535657922.927:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=938 comm="apparmor_parser"
[ 15.414542] audit: type=1400 audit(1535657922.927:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=938 comm="apparmor_parser"
[ 15.414544] audit: type=1400 audit(1535657922.927:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=938 comm="apparmor_parser"
[ 15.417948] audit: type=1400 audit(1535657922.931:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=940 comm="apparmor_parser"
[ 15.417951] audit: type=1400 audit(1535657922.931:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=940 comm="apparmor_parser"
[ 15.420544] audit: type=1400 audit(1535657922.935:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=935 comm="apparmor_parser"
[ 15.420565] audit: type=1400 audit(1535657922.935:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=935 comm="apparmor_parser"
[ 15.420567] audit: type=1400 audit(1535657922.935:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=935 comm="apparmor_parser"
[ 18.800476] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.800477] Bluetooth: BNEP filters: protocol multicast
[ 18.800481] Bluetooth: BNEP socket layer initialized
[ 22.032115] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
[ 22.094102] r8169 0000:03:00.1 enp3s0f1: link down
[ 22.094242] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
[ 22.237123] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 22.346939] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 22.682628] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 24.585540] nvidia-modeset: Allocated GPU:0 (GPU-7f1c6bf8-caaa-4d1b-6e86-cc1420c03366) @ PCI:0000:01:00.0
[ 24.585963] nvidia-modeset: Freed GPU:0 (GPU-7f1c6bf8-caaa-4d1b-6e86-cc1420c03366) @ PCI:0000:01:00.0
[ 25.742252] nvidia-modeset: Allocated GPU:0 (GPU-7f1c6bf8-caaa-4d1b-6e86-cc1420c03366) @ PCI:0000:01:00.0
[ 25.742746] nvidia-modeset: Freed GPU:0 (GPU-7f1c6bf8-caaa-4d1b-6e86-cc1420c03366) @ PCI:0000:01:00.0
[ 26.358329] wlp2s0: authenticate with 24:95:04:00:0a:e4
[ 26.364245] wlp2s0: send auth to 24:95:04:00:0a:e4 (try 1/3)
[ 26.367759] wlp2s0: authenticated
[ 26.368018] wlp2s0: associate with 24:95:04:00:0a:e4 (try 1/3)
[ 26.371523] wlp2s0: RX AssocResp from 24:95:04:00:0a:e4 (capab=0x411 status=0 aid=4)
[ 26.374631] wlp2s0: associated
[ 27.447778] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 29.797182] nvidia-modeset: Allocated GPU:0 (GPU-7f1c6bf8-caaa-4d1b-6e86-cc1420c03366) @ PCI:0000:01:00.0
[ 29.797555] nvidia-modeset: Freed GPU:0 (GPU-7f1c6bf8-caaa-4d1b-6e86-cc1420c03366) @ PCI:0000:01:00.0
[ 31.252934] nvidia-modeset: Allocated GPU:0 (GPU-7f1c6bf8-caaa-4d1b-6e86-cc1420c03366) @ PCI:0000:01:00.0
[ 31.253284] nvidia-modeset: Freed GPU:0 (GPU-7f1c6bf8-caaa-4d1b-6e86-cc1420c03366) @ PCI:0000:01:00.0
[ 32.515851] Bluetooth: RFCOMM TTY layer initialized
[ 32.515861] Bluetooth: RFCOMM socket layer initialized
[ 32.515870] Bluetooth: RFCOMM ver 1.11
[ 37.103121] rfkill: input handler disabled
[ 38.728123] usb 1-1: new full-speed USB device number 4 using xhci_hcd
[ 38.878259] usb 1-1: New USB device found, idVendor=062a, idProduct=4101
[ 38.878265] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 38.878268] usb 1-1: Product: 2.4G Keyboard Mouse
[ 38.878272] usb 1-1: Manufacturer: MOSART Semi.
[ 39.196394] usbcore: registered new interface driver usbhid
[ 39.196395] usbhid: USB HID core driver
[ 39.209106] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:062A:4101.0001/input/input17
[ 39.268536] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-1/input0
[ 39.269142] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:062A:4101.0002/input/input18
[ 39.328780] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-1/input1
[ 45.760519] nvidia-modeset: Allocated GPU:0 (GPU-7f1c6bf8-caaa-4d1b-6e86-cc1420c03366) @ PCI:0000:01:00.0
[ 45.760837] nvidia-modeset: Freed GPU:0 (GPU-7f1c6bf8-caaa-4d1b-6e86-cc1420c03366) @ PCI:0000:01:00.0
[ 215.207021] usb 1-1: USB disconnect, device number 4
[ 215.647804] usb 1-1: new full-speed USB device number 5 using xhci_hcd
[ 215.798295] usb 1-1: New USB device found, idVendor=062a, idProduct=4101
[ 215.798301] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 215.798306] usb 1-1: Product: 2.4G Keyboard Mouse
[ 215.798309] usb 1-1: Manufacturer: MOSART Semi.
[ 215.800725] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:062A:4101.0003/input/input19
[ 215.859963] hid-generic 0003:062A:4101.0003: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-1/input0
[ 215.861953] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:062A:4101.0004/input/input20
[ 215.920727] hid-generic 0003:062A:4101.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-1/input1Hors ligne
#17 Le 30/08/2018, à 21:54
- duf65
Re : [ RESOLU ] Probleme installation Asus GL742VW
ok merci pour votre aide.
Mon PC démarre et a un affichage standard C'est un bon départ.
Hors ligne
#18 Le 30/08/2018, à 22:03
- NicoApi73
Re : [ RESOLU ] Probleme installation Asus GL742VW
Non, ce n'était pas nécessaire :
dmesgremonte les messages renvoyés par le noyau.
dmesg -lerrremonte la même chose, mais uniquement les erreurs (lerr=list error)
dmesg -lerr | tail -50renvoie les 50 dernières erreurs...
Pas grand chose à voir avec les années 80. La ligne de commande est extrêmement puissante. Et garde en mémoire que nous ne sommes ni derrière ton clavier, ni derrière ton écran. C'est très simple de faire un copier-coller d'une ligne de commande....
Hors ligne
#19 Le 02/09/2018, à 09:29
- duf65
Re : [ RESOLU ] Probleme installation Asus GL742VW
Quand je disais les années 80 c'était plus à cause de mon affichage que pour la commande.
J'aime bien savoir ce que je fais avec un PC. Et même si je ne m'y connais pas trop, j'aime bien taper une ligne de commande plutôt que de cliquer sans savoir ce que ça fait exactement. Donc le terminal de me pause pas trop de problème. Mais aurais-je le courage d'apprendre à l'utiliser, ça, c'est une autre histoire ;-)
Hors ligne