#1 Le 10/10/2018, à 18:44
- Bob dit l'Âne
Création new partition sur dd "défectueux ?"[RESOLU]
Bonjour,
Quelqu'un peut-il m'expliquer brièvement ce que ça veut dire (surtout la fin du rapport de Gparted).
J'ai récupéré un DD. J'ai supprimé les partitions originales. J'essaie de le formater en fat 32.
RAPPORT
GParted 0.25.0 --enable-libparted-dmraid --enable-online-resize
Libparted 3.2
Créer Partition primaire #1 (fat32, 465.76 Gio) sur /dev/sda 00:01:16 ( ERREUR )
créer une partition vide 00:00:02 ( SUCCÈS )
chemin : /dev/sda1 (partition)
début : 2048
fin : 976773119
taille : 976771072 (465.76 Gio)
effacer les anciennes signatures de systèmes de fichiers sur /dev/sda1 00:00:00 ( SUCCÈS )
write 512.00 Kio of zeros at byte offset 0 00:00:00 ( SUCCÈS )
write 4.00 Kio of zeros at byte offset 67108864 00:00:00 ( SUCCÈS )
write 4.00 Kio of zeros at byte offset 274877906944 00:00:00 ( SUCCÈS )
write 512.00 Kio of zeros at byte offset 500106264576 00:00:00 ( SUCCÈS )
write 4.00 Kio of zeros at byte offset 500106723328 00:00:00 ( SUCCÈS )
write 8.00 Kio of zeros at byte offset 500106780672 00:00:00 ( SUCCÈS )
purger le cache du système d'exploitation sur /dev/sda 00:00:00 ( SUCCÈS )
définir le type de partition sur /dev/sda1 00:01:07 ( SUCCÈS )
nouveau type de partition : fat32
créer un nouveau système de fichiers fat32 00:00:07 ( ERREUR )
mkfs.fat -F32 -v -I -n " " /dev/sda1 00:00:07 ( ERREUR )
mkfs.fat 3.0.28 (2015-05-16)
/dev/sda1 has 255 heads and 63 sectors per track,
hidden sectors 0x0800;
logical sector size is 512,
using 0xf8 media descriptor, with 976771072 sectors;
drive number 0x80;
filesystem has 2 32-bit FATs and 64 sectors per cluster.
FAT size is 119206 sectors, and provides 15258322 clusters.
There are 32 reserved sectors.
Volume ID is 883483f1, volume label .
mkfs.fat: failed whilst writing FAT
Merci, je pense que le DD est presque mort, mais bon, une petite confirmation ....
Dernière modification par Bob dit l'Âne (Le 11/10/2018, à 11:34)
DELL G3 17 3779 - 17,3" FHD IPS - Core i5 8300H - RAM 8Go - 1To DD +128Go SSD - NVIDIA GTX 1050 Ti 4 Go
Ubuntu 22.04.3 LTS Home séparé et partition données
Akoya MD 97860 P7612 Core 2 Duo T6500 NVIDIA Realtek RTL8191SE Wireless LAN GeForce G210M
Ubuntu 16.04 LTS (« Xenial Xerus ») + NFS
Hors ligne
#2 Le 10/10/2018, à 21:50
- ??
Re : Création new partition sur dd "défectueux ?"[RESOLU]
Bonsoir.
installes smartctl et donnes l'état du disque. paragraphe 1 et 3.1 de https://doc.ubuntu-fr.org/smartmontools
Lorsqu'on ne peut pas fabriquer une partition sur un disque, il y a lieu de considérer que le disque est fichu. Cependant, il peut être possible de rechercher si les parties fichues sont réparties harmonieusement sur tout le disque ou regroupées en un seul endroit. Lorsque c'est le cas, on évite de faire un formatage utilisant cet endroit.
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#3 Le 11/10/2018, à 10:19
- Bob dit l'Âne
Re : Création new partition sur dd "défectueux ?"[RESOLU]
Merci pour ta réponse
Voici le résultat. Bon, pour moi, c'est toujours une langue étrangère.
jean-yves@P7612:~$ sudo smartctl --scan | grep -i usb
[sudo] Mot de passe de jean-yves :
/dev/sdb -d usbjmicron # /dev/sdb [USB JMicron], ATA device
jean-yves@P7612:~$ sudo smartctl -s on -a -d usbjmicron /dev/sdb
smartctl 6.6 2016-05-31 r4324 [i686-linux-4.4.0-134-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Travelstar Z5K500
Device Model: Hitachi HTS545050A7E380
Serial Number: TEJ51239HLS4YX
LU WWN Device Id: 5 000cca 71ed69d1f
Firmware Version: GG2OA6C0
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Oct 11 11:13:15 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 113) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 076 076 062 Pre-fail Always - 37618908
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 222 222 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 096 096 000 Old_age Always - 7497
5 Reallocated_Sector_Ct 0x0033 001 001 005 Pre-fail Always FAILING_NOW 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 1384
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1791
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 92
193 Load_Cycle_Count 0x0012 097 097 000 Old_age Always - 35721
194 Temperature_Celsius 0x0002 253 253 000 Old_age Always - 21 (Min/Max 13/44)
196 Reallocated_Event_Count 0x0032 002 002 000 Old_age Always - 2459
197 Current_Pending_Sector 0x0022 089 089 000 Old_age Always - 464
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 24636 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 24636 occurred at disk power-on lifetime: 1384 hours (57 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 30 d0 0b 00 00 Error: UNC 48 sectors at LBA = 0x00000bd0 = 3024
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 c0 0b 00 e0 00 00:00:37.867 READ DMA EXT
25 00 40 80 0b 00 e0 00 00:00:31.840 READ DMA EXT
ef 03 46 00 00 00 a0 00 00:00:31.839 SET FEATURES [Set transfer mode]
25 00 30 90 0b 00 00 04 00:00:31.821 READ DMA EXT
25 00 40 80 0b 00 e0 00 00:00:28.122 READ DMA EXT
Error 24635 occurred at disk power-on lifetime: 1384 hours (57 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 30 90 0b 00 00 Error: UNC 48 sectors at LBA = 0x00000b90 = 2960
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 80 0b 00 e0 00 00:00:28.122 READ DMA EXT
25 00 40 40 0b 00 e0 00 00:00:27.822 READ DMA EXT
25 00 40 00 0b 00 e0 00 00:00:27.767 READ DMA EXT
25 00 40 c0 08 00 e0 00 00:00:27.765 READ DMA EXT
25 00 40 80 08 00 e0 00 00:00:27.764 READ DMA EXT
Error 24634 occurred at disk power-on lifetime: 1384 hours (57 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 0b 00 00 Error: UNC 8 sectors at LBA = 0x00000ba8 = 2984
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 a8 0b 00 e0 00 00:00:18.424 READ DMA EXT
25 00 08 a0 0b 00 e0 00 00:00:18.424 READ DMA EXT
25 00 08 98 0b 00 e0 00 00:00:18.357 READ DMA EXT
25 00 08 90 0b 00 e0 00 00:00:17.347 READ DMA EXT
25 00 08 88 0b 00 e0 00 00:00:17.346 READ DMA EXT
Error 24633 occurred at disk power-on lifetime: 1384 hours (57 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 f0 0b 00 00 Error: UNC 16 sectors at LBA = 0x00000bf0 = 3056
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 f0 0b 00 e0 00 00:00:13.578 READ DMA EXT
e1 00 00 00 00 00 a0 00 00:00:13.556 IDLE IMMEDIATE
25 00 f0 00 0b 00 e0 00 00:00:02.915 READ DMA EXT
25 00 10 f0 0a 00 e0 00 00:00:02.913 READ DMA EXT
25 00 f0 00 0a 00 e0 00 00:00:02.900 READ DMA EXT
Error 24632 occurred at disk power-on lifetime: 1383 hours (57 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 70 90 0b 00 00 Error: UNC at LBA = 0x00000b90 = 2960
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 a0 00 0b 00 40 08 00:16:38.890 READ FPDMA QUEUED
60 00 98 00 0a 00 40 08 00:16:38.889 READ FPDMA QUEUED
60 f0 90 10 09 00 40 08 00:16:38.876 READ FPDMA QUEUED
60 90 88 80 08 00 40 08 00:16:38.875 READ FPDMA QUEUED
60 10 80 68 08 00 40 08 00:16:38.875 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
jean-yves@P7612:~$ Dernière modification par Bob dit l'Âne (Le 11/10/2018, à 10:31)
DELL G3 17 3779 - 17,3" FHD IPS - Core i5 8300H - RAM 8Go - 1To DD +128Go SSD - NVIDIA GTX 1050 Ti 4 Go
Ubuntu 22.04.3 LTS Home séparé et partition données
Akoya MD 97860 P7612 Core 2 Duo T6500 NVIDIA Realtek RTL8191SE Wireless LAN GeForce G210M
Ubuntu 16.04 LTS (« Xenial Xerus ») + NFS
Hors ligne
#4 Le 11/10/2018, à 11:12
- ??
Re : Création new partition sur dd "défectueux ?"[RESOLU]
sudo smartctl -s on -a -d usbjmicron /dev/sdb === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar Z5K500 Device Model: Hitachi HTS545050A7E380 User Capacity: 500 107 862 016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 076 076 062 Pre-fail Always - 37618908 5 Reallocated_Sector_Ct 0x0033 001 001 005 Pre-fail Always FAILING_NOW 0 9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 1384 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 002 002 000 Old_age Always - 2459 197 Current_Pending_Sector 0x0022 089 089 000 Old_age Always - 464 ATA Error Count: 24636 (device log contains only the most recent five errors) Error 24636 occurred at disk power-on lifetime: 1384 hours (57 days + 16 hours) Error: UNC 48 sectors at LBA = 3024 Error 24635 occurred at disk power-on lifetime: 1384 hours (57 days + 16 hours) Error: UNC 48 sectors at LBA = 2960 Error 24634 occurred at disk power-on lifetime: 1384 hours (57 days + 16 hours) Error: UNC 8 sectors at LBA = 2984 Error 24633 occurred at disk power-on lifetime: 1384 hours (57 days + 16 hours) Error: UNC 16 sectors at LBA = 3056 Error 24632 occurred at disk power-on lifetime: 1383 hours (57 days + 15 hours) Error: UNC at LBA = 2960
Il est totalement impossible d'écrire dans le début du disque. On y voit les erreurs du formatage que tu viens de tenter de faire.
Le disque est déclaré failing now à cause de secteurs qui ne peuvent plus être réalloués. On ne sait pas combien il y en a eu de réussies. Zéro ?
Mais 2459 tentatives ont été faites. il reste 464 secteurs qui n'ont pas pu être réparés.
Après 1384 heures de fonctionnement, avoir 24636 erreurs de lecture, ce n'est glorieux!
Si le disque n'est plus sous garantie, c'est la déchetterie.
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#5 Le 11/10/2018, à 11:33
- Bob dit l'Âne
Re : Création new partition sur dd "défectueux ?"[RESOLU]
Merci ??
C'était un disque de récupération.
C'est donc ce que je vais faire, le porter à la la déchetterie.
Je note quand même RESOLU qui ne veut pas dire ici réparation effectuée.
Mais c'est une piste pour quelqu'un qui aurait le même problème que moi.
A +
DELL G3 17 3779 - 17,3" FHD IPS - Core i5 8300H - RAM 8Go - 1To DD +128Go SSD - NVIDIA GTX 1050 Ti 4 Go
Ubuntu 22.04.3 LTS Home séparé et partition données
Akoya MD 97860 P7612 Core 2 Duo T6500 NVIDIA Realtek RTL8191SE Wireless LAN GeForce G210M
Ubuntu 16.04 LTS (« Xenial Xerus ») + NFS
Hors ligne