#1 Le 13/11/2018, à 09:50
- clement.analogue
Disque Dur -- exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Bonjour,
Depuis hier, j'ai des problèmes de disques durs. J'ai des lenteurs constantes et des problèmes d'écriture. Il a fallu 20 minutes à mon ordinateur pour démarrer (contre quelques secondes normalement) en m'y prenant à deux reprises. Ceux-ci fonctionnaient parfaitement depuis plusieurs années (3 RAID1, "clean" d'après mdstat). Ce sont des Seagate Enterprise Capacity (x4) et Seagate Barracuda (x2). J'ai ce message qui se répète en continu
[ 3250.970987] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 3250.970992] ata2.00: failed command: SMART
[ 3250.970997] ata2.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 9 pio 512 in
res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 3250.971000] ata2.00: status: { DRDY }
[ 3250.971003] ata2: hard resetting link
[ 3260.970874] ata2: softreset failed (1st FIS failed)
[ 3260.970880] ata2: hard resetting link
[ 3270.970737] ata2: softreset failed (1st FIS failed)
[ 3270.970742] ata2: hard resetting link
[ 3305.970262] ata2: softreset failed (1st FIS failed)
[ 3305.970268] ata2: hard resetting link
[ 3311.189482] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3311.189485] ata2.00: link online but device misclassified
[ 3316.221334] ata2.00: qc timeout (cmd 0xec)
[ 3316.221342] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 3316.221343] ata2.00: revalidation failed (errno=-5)
[ 3316.221347] ata2: hard resetting link
[ 3316.697325] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3320.236564] ata2.00: configured for UDMA/133
[ 3320.236592] ata2: EH complete% sudo lshw -c disk
[sudo] password for clement:
*-disk
description: ATA Disk
product: ST3000DM001-1CH1
vendor: Seagate
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: CC27
serial: W1F3Q0DE
size: 2794GiB (3TB)
capabilities: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=c69f7c6c-5af1-48e1-8238-726a5a8191ab logicalsectorsize=512 sectorsize=4096
*-disk
description: ATA Disk
product: ST3000DM001-1CH1
vendor: Seagate
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sdb
version: CC27
serial: W1F3Q0RE
size: 2794GiB (3TB)
capabilities: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=2259666c-bed3-41e6-af8f-9da2fc1bfd82 logicalsectorsize=512 sectorsize=4096
*-disk
description: ATA Disk
product: ST1000NM0033-9ZM
vendor: Seagate
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sdc
version: SN04
serial: Z1W4QK99
size: 931GiB (1TB)
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=9ee6db07
*-disk
description: ATA Disk
product: ST1000NM0033-9ZM
vendor: Seagate
physical id: 0.0.0
bus info: scsi@3:0.0.0
logical name: /dev/sdd
version: SN04
serial: Z1W4QH3B
size: 931GiB (1TB)
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-disk
description: ATA Disk
product: ST4000NM0024-1HT
vendor: Seagate
physical id: 0.0.0
bus info: scsi@4:0.0.0
logical name: /dev/sde
version: SN02
serial: Z4F02158
size: 3726GiB (4TB)
capabilities: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=aaa6cbcf-f81e-4b90-ad01-50054efc9bfb logicalsectorsize=512 sectorsize=4096
*-disk
description: ATA Disk
product: ST4000NM0024-1HT
vendor: Seagate
physical id: 0.0.0
bus info: scsi@5:0.0.0
logical name: /dev/sdf
version: SN02
serial: Z4F020FH
size: 3726GiB (4TB)
capabilities: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=4070e5bf-948f-4203-ab0e-65755f966208 logicalsectorsize=512 sectorsize=4096Je suis sous Ubuntu Xenal 16.04 avec le noyau 4.15.0-39-generic (car problème de reconnaissance de matériel trop récent).
Merci d'avance pour votre aide !
Site personnel
Association Ubuntu-Lyon : Organisation d'événements autour d'Ubuntu sur Lyon.
Venez discuter philosophie, exposez vos textes et réflexions, ...
Forum Analogue : Philosophie, sciences, art, actualité, etc.
Hors ligne