problème écriture / effacement fichiers disque dur externe - résolu

crocodingo31 · Le 09/03/2019, à 11:10

Bonjour,
J'avais un PC fixe (tour) avec 2 disques durs, un avec un dual boot ubuntu/windows et un autre de partage de fichiers.
Ce PC a rendu l'âme mais j'ai gardé le disque dur de partage que j'ai mis dans un boitier interne pour servir de stockage de fichiers.
J'ai maintenant un PC portable.
Jusqu'à présent je n'avais aucun problème mais depuis peu je ne peux plus sauvegarder ni effacer de fichiers.
Je n'arrive pas à modifier les droits.
Pourriez-vous m'aider ?
Cordialement
Thibaut
Résultat de fdisk -l:
Périphérique Amorçage Début Fin Secteurs Taille Id Type
/dev/sdb1 2048 976773119 976771072 465,8G c W95 FAT32 (LBA)

Dernière modification par crocodingo31 (Le 17/03/2019, à 17:52)

inbox · Le 09/03/2019, à 14:40

Salut,

Quand tu écris "mis dans un boîtier interne", je suppose que tu as voulu écrire "boîtier externe" ?

Il faut que tu démarres ton PC sans ton disque dur externe. Une fois ta session ouverte, branche le et essaye de copier un fichier dessus. Un fois que tu as le message d'erreur, donne le en retour.

En plus, donne le résultat de :

dmesg | tail -n30

A+

crocodingo31 · Le 09/03/2019, à 15:32

Bonjour
Oui je voulais dire boitier externe !
Je démarre toujours le PC sans le disque dur externe de branché.
Résultat de dmesg | tail -n30:
[45161.783779] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45162.066130] [drm:drm_mode_addfb2 [drm]] [FB:95]
[45162.082323] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45162.215593] [drm:drm_mode_addfb2 [drm]] [FB:95]
[45162.321473] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45162.339787] [drm:drm_mode_addfb2 [drm]] [FB:95]
[45162.354964] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45162.666744] [drm:drm_mode_addfb2 [drm]] [FB:95]
[45162.859318] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45163.083658] [drm:drm_mode_addfb2 [drm]] [FB:92]
[45163.131854] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45163.151823] [drm:drm_mode_addfb2 [drm]] [FB:92]
[45163.182002] [drm:drm_mode_addfb2 [drm]] [FB:95]
[45163.234101] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45163.250989] [drm:drm_mode_addfb2 [drm]] [FB:92]
[45163.317648] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45163.467580] [drm:drm_mode_addfb2 [drm]] [FB:95]
[45163.500849] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45163.534151] [drm:drm_mode_addfb2 [drm]] [FB:95]
[45163.550758] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45163.566657] [drm:drm_mode_addfb2 [drm]] [FB:95]
[45163.584058] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45163.700500] [drm:drm_mode_addfb2 [drm]] [FB:95]
[45164.239474] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45164.247538] [drm:drm_mode_addfb2 [drm]] [FB:95]
[45164.300191] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45164.888537] [drm:drm_mode_addfb2 [drm]] [FB:95]
[45165.489910] [drm:drm_mode_addfb2 [drm]] [FB:71]
[45165.554225] [drm:drm_mode_addfb2 [drm]] [FB:92]
[45165.567687] [drm:drm_mode_addfb2 [drm]] [FB:71]

inbox · Le 09/03/2019, à 15:39

Le retour de dmesg ne renvoie rien d'interressant. Es-tu certain d'avoir bien branché ton disque externe et l'avoir vu apparaître dans le gestionnaire de fichiers ?

En complément, donne le retour complet de :

dmesg

Le retour est à coller entre balises code : bouton au dessus de la zone de réponse.

crocodingo31 · Le 09/03/2019, à 15:54

Oui, je lis les fichiers.
Par contre il y a un répertoire auquel je ne peux plus accéder (j'ai fait une copie à un moment et cela a planté !).
dmesg me renvoie une quantité énorme de lignes !

crocodingo31 · Le 09/03/2019, à 16:31

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-31-generic (buildd@lgw01-16) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 (Ubuntu 4.4.0-31.50-generic 4.4.13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-31-generic root=UUID=4969c7c4-7bc6-43ce-9097-1c6c0e76ac7a ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bba08fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bba09000-0x00000000bba0ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bba10000-0x00000000bc0f5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc0f6000-0x00000000bc341fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc342000-0x00000000cb41bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb41c000-0x00000000cb4a5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cb4a6000-0x00000000cb5b3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb5b4000-0x00000000cba1ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cba20000-0x00000000cbffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. CX61 2PC/MS-16GD, BIOS E16GDIMS.60P 08/26/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7FE0000000 write-back
[    0.000000]   2 base 0220000000 mask 7FF0000000 write-back
[    0.000000]   3 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   5 base 00CE000000 mask 7FFE000000 uncachable
[    0.000000]   6 base 00CD000000 mask 7FFF000000 uncachable
[    0.000000]   7 base 022FE00000 mask 7FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 8GB, type WB
[    0.000000] reg 1, base: 8GB, range: 512MB, type WB
[    0.000000] reg 2, base: 8704MB, range: 256MB, type WB
[    0.000000] reg 3, base: 3584MB, range: 512MB, type UC
[    0.000000] reg 4, base: 3328MB, range: 256MB, type UC
[    0.000000] reg 5, base: 3296MB, range: 32MB, type UC
[    0.000000] reg 6, base: 3280MB, range: 16MB, type UC
[    0.000000] reg 7, base: 8958MB, range: 2MB, type UC
[    0.000000] total RAM covered: 8142M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 4M 	num_reg: 9  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 128MB, type WB
[    0.000000] reg 3, base: 3200MB, range: 64MB, type WB
[    0.000000] reg 4, base: 3264MB, range: 16MB, type WB
[    0.000000] reg 5, base: 4GB, range: 4GB, type WB
[    0.000000] reg 6, base: 8GB, range: 512MB, type WB
[    0.000000] reg 7, base: 8704MB, range: 256MB, type WB
[    0.000000] reg 8, base: 8958MB, range: 2MB, type UC
[    0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcc000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd7a0-0x000fd7af] mapped at [ffff8800000fd7a0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33b7c000-0x35db5fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 MSI_NB)
[    0.000000] ACPI: XSDT 0x00000000CB6B8090 00009C (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000CB6C71F0 00010C (v05 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000CB6B81C0 00F02E (v02 MSI_NB MEGABOOK 00000014 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000CBA1E080 000040
[    0.000000] ACPI: APIC 0x00000000CB6C7300 000072 (v03 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000CB6C7378 000044 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: LPIT 0x00000000CB6C73C0 00005C (v01 MSI_NB MEGABOOK 00000000 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CB6C7420 000228 (v01 INTEL  sensrhub 00000000 INTL 20120711)
[    0.000000] ACPI: SLIC 0x00000000CB6C7648 000176 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000CB6C77C0 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000CB6C7D00 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: MCFG 0x00000000CB6C87D8 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CB6C8818 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CB6C8850 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000CB6C8B68 003562 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000CB6CC0D0 0015E0 (v01 SgRef  SgPeg    00001000 INTL 20120711)
[    0.000000] ACPI: MSFF 0x00000000CB6CD6B0 000029 (v01 MSI_NB MEGABOOK 00000010 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000CB6CD6E0 001399 (v01 OptRef OptTabl  00001000 INTL 20120711)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x22fdf6000-0x22fdfafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bba08fff]
[    0.000000]   node   0: [mem 0x00000000bba10000-0x00000000bc0f5fff]
[    0.000000]   node   0: [mem 0x00000000bc342000-0x00000000cb41bfff]
[    0.000000]   node   0: [mem 0x00000000cb4a6000-0x00000000cb5b3fff]
[    0.000000]   node   0: [mem 0x00000000cbfff000-0x00000000cbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
[    0.000000] On node 0 totalpages: 2076787
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12940 pages used for memmap
[    0.000000]   DMA32 zone: 828120 pages, LIFO batch:31
[    0.000000]   Normal zone: 19448 pages used for memmap
[    0.000000]   Normal zone: 1244672 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xcd200000-0xcf1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbba09000-0xbba0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc0f6000-0xbc341fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb41c000-0xcb4a5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb5b4000-0xcba1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcba20000-0xcbffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88022fa00000 s98008 r8192 d28968 u524288
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2044314
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-31-generic root=UUID=4969c7c4-7bc6-43ce-9097-1c6c0e76ac7a ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8055616K/8307148K available (8393K kernel code, 1282K rwdata, 3940K rodata, 1480K init, 1292K bss, 251532K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:456 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.300 MHz processor
[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.60 BogoMIPS (lpj=9977200)
[    0.000029] pid_max: default: 32768 minimum: 301
[    0.000034] ACPI: Core revision 20150930
[    0.013908] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.013926] Security Framework initialized
[    0.013927] Yama: becoming mindful.
[    0.013941] AppArmor: AppArmor initialized
[    0.014401] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.015795] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.016389] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.016397] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.016582] Initializing cgroup subsys io
[    0.016585] Initializing cgroup subsys memory
[    0.016590] Initializing cgroup subsys devices
[    0.016592] Initializing cgroup subsys freezer
[    0.016594] Initializing cgroup subsys net_cls
[    0.016596] Initializing cgroup subsys perf_event
[    0.016597] Initializing cgroup subsys net_prio
[    0.016599] Initializing cgroup subsys hugetlb
[    0.016601] Initializing cgroup subsys pids
[    0.016622] CPU: Physical Processor ID: 0
[    0.016622] CPU: Processor Core ID: 0
[    0.016626] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.016627] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.017500] mce: CPU supports 7 MCE banks
[    0.017512] CPU0: Thermal monitoring enabled (TM1)
[    0.017519] process: using mwait in idle threads
[    0.017521] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.017522] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.017836] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000)
[    0.021646] ftrace: allocating 31994 entries in 125 pages
[    0.033751] smpboot: Max logical packages: 2
[    0.033754] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.034169] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.073856] TSC deadline timer enabled
[    0.073860] smpboot: CPU0: Intel(R) Core(TM) i3-4100M CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.073873] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.073892] ... version:                3
[    0.073893] ... bit width:              48
[    0.073894] ... generic registers:      4
[    0.073894] ... value mask:             0000ffffffffffff
[    0.073895] ... max period:             0000ffffffffffff
[    0.073896] ... fixed-purpose events:   3
[    0.073897] ... event mask:             000000070000000f
[    0.074613] x86: Booting SMP configuration:
[    0.074614] .... node  #0, CPUs:      #1
[    0.077979] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.078041]  #2 #3
[    0.084546] x86: Booted up 1 node, 4 CPUs
[    0.084549] smpboot: Total of 4 processors activated (19954.40 BogoMIPS)
[    0.087956] devtmpfs: initialized
[    0.091028] evm: security.selinux
[    0.091029] evm: security.SMACK64
[    0.091029] evm: security.SMACK64EXEC
[    0.091030] evm: security.SMACK64TRANSMUTE
[    0.091031] evm: security.SMACK64MMAP
[    0.091032] evm: security.ima
[    0.091032] evm: security.capability
[    0.091083] PM: Registering ACPI NVS region [mem 0xbba09000-0xbba0ffff] (28672 bytes)
[    0.091085] PM: Registering ACPI NVS region [mem 0xcb5b4000-0xcba1ffff] (4636672 bytes)
[    0.091203] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.091284] pinctrl core: initialized pinctrl subsystem
[    0.091380] RTC time: 15:13:59, date: 03/10/19
[    0.091479] NET: Registered protocol family 16
[    0.099849] cpuidle: using governor ladder
[    0.111838] cpuidle: using governor menu
[    0.111842] PCCT header not found.
[    0.111907] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.111908] ACPI: bus type PCI registered
[    0.111910] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.111977] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.111979] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.111987] PCI: Using configuration type 1 for base access
[    0.112014] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.124132] ACPI: Added _OSI(Module Device)
[    0.124134] ACPI: Added _OSI(Processor Device)
[    0.124135] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.124136] ACPI: Added _OSI(Processor Aggregator Device)
[    0.126509] ACPI Error: No handler for Region [EC__] (ffff8802270abc18) [EmbeddedControl] (20150930/evregion-163)
[    0.126513] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20150930/exfldio-297)
[    0.126516] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC._REG] (Node ffff8802270ac488), AE_NOT_EXIST (20150930/psparse-542)
[    0.127526] ACPI: Executed 1 blocks of module-level executable AML code
[    0.130291] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.131338] ACPI: Dynamic OEM Table Load:
[    0.131343] ACPI: SSDT 0xFFFF880225D90800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.131975] ACPI: Dynamic OEM Table Load:
[    0.131980] ACPI: SSDT 0xFFFF880225CF2800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.132640] ACPI: Dynamic OEM Table Load:
[    0.132643] ACPI: SSDT 0xFFFF880225D8C800 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.133646] ACPI : EC: EC started
[    0.134778] ACPI: Interpreter enabled
[    0.134786] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.134791] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.134806] ACPI: (supports S0 S3 S4 S5)
[    0.134807] ACPI: Using IOAPIC for interrupt routing
[    0.134829] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.142379] ACPI: Power Resource [NVP3] (on)
[    0.142401] ACPI: Power Resource [NVP2] (on)
[    0.145704] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.145709] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.146148] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.146149] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.146511] PCI host bridge to bus 0000:00
[    0.146513] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.146515] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.146516] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.146518] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.146519] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.146520] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.146521] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.146523] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.146524] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.146525] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[    0.146527] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.146533] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.146620] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.146651] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.146728] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.146759] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
[    0.146788] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.146859] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.146892] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.146904] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.146910] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.146914] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.146987] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.146998] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
[    0.147098] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.147123] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[    0.147172] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.147212] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.147243] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.147270] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1e000-0xf7a1e00f 64bit]
[    0.147321] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.147398] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.147424] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
[    0.147493] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.147544] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.147577] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.147601] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[    0.147657] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.147728] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.147795] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.147869] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.147905] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.147972] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.148041] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.148074] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[    0.148134] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.148199] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.148235] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.148262] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
[    0.148331] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.148382] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.148416] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.148574] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.148595] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.148602] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.148610] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.148617] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.148624] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.148631] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
[    0.148657] pci 0000:00:1f.2: PME# supported from D3hot
[    0.148722] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.148737] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
[    0.148756] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.148875] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[    0.148894] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.148904] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.148914] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.148921] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.148928] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.149006] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.155879] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.155881] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.155883] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.155886] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.155912] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.155972] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.156085] pci 0000:04:00.0: [1969:1091] type 00 class 0x020000
[    0.156133] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
[    0.156145] pci 0000:04:00.0: reg 0x18: [io  0xd000-0xd07f]
[    0.156236] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.156269] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.163922] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.163926] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.163929] pci 0000:00:1c.3:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.164004] pci 0000:05:00.0: [10ec:8723] type 00 class 0x028000
[    0.164044] pci 0000:05:00.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.164075] pci 0000:05:00.0: reg 0x18: [mem 0xf7800000-0xf7803fff 64bit]
[    0.164169] pci 0000:05:00.0: supports D1 D2
[    0.164170] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.164205] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.171887] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.171891] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.171895] pci 0000:00:1c.5:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.173133] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.173177] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.173216] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.173255] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.173295] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.173336] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.173376] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.173419] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.173569] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.173594] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.173684] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.173686] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.173688] vgaarb: loaded
[    0.173689] vgaarb: bridge control possible 0000:00:02.0
[    0.173907] SCSI subsystem initialized
[    0.173944] libata version 3.00 loaded.
[    0.173962] ACPI: bus type USB registered
[    0.173975] usbcore: registered new interface driver usbfs
[    0.173982] usbcore: registered new interface driver hub
[    0.173994] usbcore: registered new device driver usb
[    0.174107] PCI: Using ACPI for IRQ routing
[    0.175381] PCI: pci_cache_line_size set to 64 bytes
[    0.175558] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[    0.175559] e820: reserve RAM buffer [mem 0xbba09000-0xbbffffff]
[    0.175560] e820: reserve RAM buffer [mem 0xbc0f6000-0xbfffffff]
[    0.175561] e820: reserve RAM buffer [mem 0xcb41c000-0xcbffffff]
[    0.175562] e820: reserve RAM buffer [mem 0xcb5b4000-0xcbffffff]
[    0.175563] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[    0.175657] NetLabel: Initializing
[    0.175658] NetLabel:  domain hash size = 128
[    0.175658] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.175668] NetLabel:  unlabeled traffic allowed by default
[    0.175727] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.175732] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.178758] clocksource: Switched to clocksource hpet
[    0.183974] AppArmor: AppArmor Filesystem Enabled
[    0.184036] pnp: PnP ACPI init
[    0.184125] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.184129] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.184271] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.184273] system 00:01: [io  0xffff] has been reserved
[    0.184274] system 00:01: [io  0xffff] has been reserved
[    0.184276] system 00:01: [io  0xffff] has been reserved
[    0.184277] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.184278] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.184280] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.184281] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.184282] system 00:01: [io  0x1800-0x18fe] could not be reserved
[    0.184284] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.184286] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.184308] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.184347] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.184349] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.184389] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.184390] system 00:04: [io  0x034c-0x034f] has been reserved
[    0.184392] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.184907] pnp 00:05: Plug and Play ACPI device, IDs PNP030b (active)
[    0.184944] pnp 00:06: Plug and Play ACPI device, IDs ETD0300 PNP0f13 (active)
[    0.185413] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.185416] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.185417] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.185419] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.185421] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.185423] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.185424] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.185426] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.185428] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.185430] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.185431] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.185433] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.185435] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185645] pnp: PnP ACPI: found 8 devices
[    0.191756] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.191778] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.191780] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.191782] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.191798] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.191800] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.191801] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.191803] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.191804] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.191805] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.191811] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
[    0.191819] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
[    0.191821] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.191823] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.191825] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.191828] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.191830] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.191833] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.191839] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.191842] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.191848] pci 0000:00:1c.0:   bridge window [mem 0xcf200000-0xcf3fffff]
[    0.191852] pci 0000:00:1c.0:   bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
[    0.191858] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.191862] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.191867] pci 0000:00:1c.3:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.191876] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.191879] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.191883] pci 0000:00:1c.5:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.191892] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.191893] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.191894] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.191896] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.191897] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.191898] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.191899] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.191900] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.191902] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.191903] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff window]
[    0.191904] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.191906] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.191907] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.191908] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.191909] pci_bus 0000:03: resource 1 [mem 0xcf200000-0xcf3fffff]
[    0.191911] pci_bus 0000:03: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
[    0.191912] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.191913] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff]
[    0.191915] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.191916] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.191943] NET: Registered protocol family 2
[    0.192075] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.192175] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.192289] TCP: Hash tables configured (established 65536 bind 65536)
[    0.192309] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.192331] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.192376] NET: Registered protocol family 1
[    0.192391] pci 0000:00:02.0: Video device with shadowed ROM
[    0.230855] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.230900] PCI: CLS 64 bytes, default 64
[    0.230939] Trying to unpack rootfs image as initramfs...
[    0.715764] Freeing initrd memory: 35048K (ffff880033b7c000 - ffff880035db6000)
[    0.715779] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.715781] software IO TLB [mem 0xc741c000-0xcb41c000] (64MB) mapped at [ffff8800c741c000-ffff8800cb41bfff]
[    0.715836] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[    0.715837] hw unit of domain pp0-core 2^-14 Joules
[    0.715838] hw unit of domain package 2^-14 Joules
[    0.715839] hw unit of domain dram 2^-14 Joules
[    0.715840] hw unit of domain pp1-gpu 2^-14 Joules
[    0.715918] Scanning for low memory corruption every 60 seconds
[    0.716207] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.716233] audit: initializing netlink subsys (disabled)
[    0.716245] audit: type=2000 audit(1552230839.712:1): initialized
[    0.716581] Initialise system trusted keyring
[    0.716671] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.716672] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.717931] zbud: loaded
[    0.718113] VFS: Disk quotas dquot_6.6.0
[    0.718140] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.718357] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.718558] fuse init (API version 7.23)
[    0.718671] Key type big_key registered
[    0.718692] Allocating IMA MOK and blacklist keyrings.
[    0.719100] Key type asymmetric registered
[    0.719103] Asymmetric key parser 'x509' registered
[    0.719132] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.719158] io scheduler noop registered
[    0.719160] io scheduler deadline registered (default)
[    0.719184] io scheduler cfq registered
[    0.719856] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.719858] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.719860] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.719871] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[    0.719873] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
[    0.719890] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.719895] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.719913] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.719915] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.719918] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.719935] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.719936] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    0.719939] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.719944] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.719955] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.719978] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[    0.719983] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.720006] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    0.720007] vesafb: scrolling: redraw
[    0.720008] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.720017] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 4160k, total 4160k
[    0.720092] Console: switching to colour frame buffer device 170x48
[    0.720105] fb0: VESA VGA frame buffer device
[    0.720118] intel_idle: MWAIT substates: 0x42120
[    0.720119] intel_idle: v0.4.1 model 0x3C
[    0.720120] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.720553] ACPI: AC Adapter [ADP1] (on-line)
[    0.720613] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input0
[    0.720794] ACPI: Lid Switch [LID0]
[    0.720832] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.720835] ACPI: Power Button [PWRB]
[    0.720862] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.720863] ACPI: Sleep Button [SLPB]
[    0.720891] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.720893] ACPI: Power Button [PWRF]
[    0.721880] thermal LNXTHERM:00: registered as thermal_zone0
[    0.721882] ACPI: Thermal Zone [THRM] (47 C)
[    0.721930] GHES: HEST is not enabled!
[    0.722045] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.723680] Linux agpgart interface v0.103
[    0.725865] brd: module loaded
[    0.726808] loop: module loaded
[    0.726994] libphy: Fixed MDIO Bus: probed
[    0.726996] tun: Universal TUN/TAP device driver, 1.6
[    0.726997] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.727028] PPP generic driver version 2.4.2
[    0.727073] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.727077] ehci-pci: EHCI PCI platform driver
[    0.727182] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.727187] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.727198] ehci-pci 0000:00:1a.0: debug port 2
[    0.731096] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.731117] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000
[    0.742807] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.742855] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.742857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.742858] usb usb1: Product: EHCI Host Controller
[    0.742860] usb usb1: Manufacturer: Linux 4.4.0-31-generic ehci_hcd
[    0.742861] usb usb1: SerialNumber: 0000:00:1a.0
[    0.743056] hub 1-0:1.0: USB hub found
[    0.743061] hub 1-0:1.0: 2 ports detected
[    0.743284] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.743289] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.743299] ehci-pci 0000:00:1d.0: debug port 2
[    0.747211] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.747222] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
[    0.758804] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.758857] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758859] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758861] usb usb2: Product: EHCI Host Controller
[    0.758862] usb usb2: Manufacturer: Linux 4.4.0-31-generic ehci_hcd
[    0.758863] usb usb2: SerialNumber: 0000:00:1d.0
[    0.759048] hub 2-0:1.0: USB hub found
[    0.759054] hub 2-0:1.0: 2 ports detected
[    0.759177] ehci-platform: EHCI generic platform driver
[    0.759192] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.759197] ohci-pci: OHCI PCI platform driver
[    0.759206] ohci-platform: OHCI generic platform driver
[    0.759214] uhci_hcd: USB Universal Host Controller Interface driver
[    0.759336] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.759340] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.760418] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.760423] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.760494] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.760496] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.760497] usb usb3: Product: xHCI Host Controller
[    0.760498] usb usb3: Manufacturer: Linux 4.4.0-31-generic xhci-hcd
[    0.760499] usb usb3: SerialNumber: 0000:00:14.0
[    0.760667] hub 3-0:1.0: USB hub found
[    0.760684] hub 3-0:1.0: 14 ports detected
[    0.763727] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.763731] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.763762] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.763763] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.763764] usb usb4: Product: xHCI Host Controller
[    0.763766] usb usb4: Manufacturer: Linux 4.4.0-31-generic xhci-hcd
[    0.763767] usb usb4: SerialNumber: 0000:00:14.0
[    0.763939] hub 4-0:1.0: USB hub found
[    0.763949] hub 4-0:1.0: 4 ports detected
[    0.764659] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.786034] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.786037] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.786183] mousedev: PS/2 mouse device common for all mice
[    0.786873] rtc_cmos 00:02: RTC can wake from S4
[    0.787012] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.787036] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.787043] i2c /dev entries driver
[    0.787088] device-mapper: uevent: version 1.0.3
[    0.787161] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.787175] Intel P-state driver initializing.
[    0.787344] ledtrig-cpu: registered to indicate activity on CPUs
[    0.788207] NET: Registered protocol family 10
[    0.788656] NET: Registered protocol family 17
[    0.788692] Key type dns_resolver registered
[    0.789155] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x17
[    0.789186] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x17
[    0.789211] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x17
[    0.789246] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x17
[    0.789329] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.789718] registered taskstats version 1
[    0.789780] Loading compiled-in X.509 certificates
[    0.792071] Loaded X.509 cert 'Build time autogenerated kernel key: cfb4d0870811f0d88a3f3259915bd8e83759f99c'
[    0.792120] zswap: loaded using pool lzo/zbud
[    0.795303] Key type trusted registered
[    0.797762] Key type encrypted registered
[    0.797769] AppArmor: AppArmor sha1 policy hashing enabled
[    0.797773] ima: No TPM chip found, activating TPM-bypass!
[    0.797794] evm: HMAC attrs: 0x1
[    0.798295]   Magic number: 11:490:234
[    0.798336] acpi device:4e: hash matches
[    0.798401] rtc_cmos 00:02: setting system clock to 2019-03-10 15:14:00 UTC (1552230840)
[    0.798454] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.798455] EDD information not available.
[    0.798518] PM: Hibernation image not present or could not be loaded.
[    0.808049] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.826834] ACPI: Battery Slot [BAT1] (battery present)
[    0.827809] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    0.827811] Write protecting the kernel read-only data: 14336k
[    0.828192] Freeing unused kernel memory: 1836K (ffff880001835000 - ffff880001a00000)
[    0.828531] Freeing unused kernel memory: 156K (ffff880001dd9000 - ffff880001e00000)
[    0.836636] random: systemd-udevd urandom read with 12 bits of entropy available
[    0.861166] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.872067] sdhci: Secure Digital Host Controller Interface driver
[    0.872071] sdhci: Copyright(c) Pierre Ossman
[    0.878552] hidraw: raw HID events driver (C) Jiri Kosina
[    0.888002] wmi: Mapper loaded
[    0.935836] [drm] Initialized drm 1.1.0 20060810
[    0.951624] ahci 0000:00:1f.2: version 3.0
[    0.951819] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
[    0.951822] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.960489] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [44:8a:5b:ef:f2:bd]
[    0.969017] scsi host0: ahci
[    0.979349] scsi host1: ahci
[    0.981398] scsi host2: ahci
[    0.981472] MXM: GUID detected in BIOS
[    0.981565] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    0.981638] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    0.981929] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    0.981933] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    0.982235] checking generic (d0000000 410000) vs hw (e0000000 10000000)
[    0.982237] checking generic (d0000000 410000) vs hw (f0000000 2000000)
[    0.982284] nouveau 0000:01:00.0: NVIDIA GF117 (0d7000a2)
[    0.982349] scsi host3: ahci
[    0.982469] scsi host4: ahci
[    0.982533] ata1: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a100 irq 30
[    0.982535] ata2: DUMMY
[    0.982536] ata3: DUMMY
[    0.982538] ata4: DUMMY
[    0.982542] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 30
[    0.983198] [drm] Memory usable by graphics device = 2048M
[    0.983201] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[    0.983203] fb: switching to inteldrmfb from VESA VGA
[    0.983233] Console: switching to colour dummy device 80x25
[    0.983321] [drm] Replacing VGA console driver
[    0.990867] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.990870] [drm] Driver supports precise vblank timestamp query.
[    0.991695] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.022811] nouveau 0000:01:00.0: bios: version 75.17.82.00.08
[    1.058755] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.078756] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.083530] alx 0000:04:00.0 enp4s0: renamed from eth0
[    1.138771] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    1.186929] fbcon: inteldrmfb (fb0) is primary device
[    1.187002] Console: switching to colour frame buffer device 170x48
[    1.187026] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.187527] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.189274] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.189279] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    1.189283] ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff8802270f1050), AE_NOT_FOUND (20150930/psparse-542)
[    1.189436] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:50/LNXVIDEO:00/input/input7
[    1.191148] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.191151] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.191298] hub 1-1:1.0: USB hub found
[    1.191400] hub 1-1:1.0: 6 ports detected
[    1.191975] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.192343] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[    1.192406] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    1.211161] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.211164] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.211425] hub 2-1:1.0: USB hub found
[    1.211522] hub 2-1:1.0: 8 ports detected
[    1.275314] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[    1.298784] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.302490] ata1.00: ATAPI: TSSTcorp CDDVDW SN-208FB, TM00, max UDMA/100
[    1.305058] ata1.00: configured for UDMA/100
[    1.308795] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208FB  TM00 PQ: 0 ANSI: 5
[    1.312295] vga_switcheroo: enabled
[    1.312379] [TTM] Zone  kernel: Available graphics memory: 4047082 kiB
[    1.312381] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.312382] [TTM] Initializing pool allocator
[    1.312386] [TTM] Initializing DMA pool allocator
[    1.312397] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    1.312399] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    1.312402] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[    1.312403] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    1.312405] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[    1.314753] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.315242] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    1.315247] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802270e1fc8), AE_NOT_FOUND (20150930/psparse-542)
[    1.315393] ata5.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
[    1.315395] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.315910] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    1.315913] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802270e1fc8), AE_NOT_FOUND (20150930/psparse-542)
[    1.316044] ata5.00: configured for UDMA/133
[    1.331243] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.331245] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.331375] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.331454] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.331783] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5
[    1.332019] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.332023] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.332093] sd 4:0:0:0: [sda] Write Protect is off
[    1.332096] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.332125] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.332131] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.374745] usb 3-2: New USB device found, idVendor=04f3, idProduct=0103
[    1.374749] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.374861] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.374865] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.384038] usbcore: registered new interface driver usbhid
[    1.384041] usbhid: USB HID core driver
[    1.386552] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:04F3:0103.0001/input/input9
[    1.386949] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-0000:00:14.0-2/input0
[    1.388066] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:04F3:0103.0002/input/input10
[    1.388167] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.11 Device [HID 04f3:0103] on usb-0000:00:14.0-2/input1
[    1.392866]  sda: sda1 sda2 < sda5 sda6 >
[    1.393325] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.398831] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    1.398841] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    1.486769] usb 3-6: new low-speed USB device number 3 using xhci_hcd
[    1.678832] usb 3-6: New USB device found, idVendor=04d9, idProduct=1133
[    1.678835] usb 3-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.678946] usb 3-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.685841] input: HID 04d9:1133 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:04D9:1133.0003/input/input11
[    1.686034] hid-generic 0003:04D9:1133.0003: input,hidraw2: USB HID v1.10 Mouse [HID 04d9:1133] on usb-0000:00:14.0-6/input0
[    1.714760] tsc: Refined TSC clocksource calibration: 2494.225 MHz
[    1.714764] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3ea95b09, max_idle_ns: 440795287034 ns
[    1.850742] usb 3-7: new full-speed USB device number 4 using xhci_hcd
[    1.979998] usb 3-7: New USB device found, idVendor=13d3, idProduct=3394
[    1.980001] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.980003] usb 3-7: Product: RT Bluetooth Radio
[    1.980004] usb 3-7: Manufacturer: Realtek
[    1.980005] usb 3-7: SerialNumber: 00e04c000001
[    2.006981] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.013922] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x550f00)
[    2.036410] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x15, 0x0c.
[    2.060102] psmouse serio1: elantech: Elan sample query result 00, 5a, 96
[    2.146781] usb 3-8: new high-speed USB device number 5 using xhci_hcd
[    2.176003] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[    2.330131] usb 3-8: New USB device found, idVendor=064e, idProduct=9809
[    2.330134] usb 3-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.330136] usb 3-8: Product: USB 2.0 Webcam Device
[    2.330137] usb 3-8: Manufacturer: SuYin
[    2.330138] usb 3-8: SerialNumber: HF1016-T840-HN03-1-REV0100
[    2.392530] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[    2.392553] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[    2.408144] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe B
[    2.408168] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
[    2.714768] clocksource: Switched to clocksource tsc
[    2.758556] random: nonblocking pool is initialized
[    2.852836] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    2.852943] systemd[1]: Detected architecture x86-64.
[    2.867249] systemd[1]: Set hostname to <jacquin-CX61-2PC>.
[    2.903415] systemd[1]: Initializing machine ID from random generator.
[    2.903445] systemd[1]: Installed transient /etc/machine-id file.
[    4.639909] systemd[1]: Listening on Syslog Socket.
[    4.639980] systemd[1]: Listening on Journal Socket.
[    4.640003] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.640030] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.640123] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.640146] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.640165] systemd[1]: Listening on udev Kernel Socket.
[    4.640170] systemd[1]: Reached target Encrypted Volumes.
[    4.640215] systemd[1]: Listening on Journal Audit Socket.
[    4.640221] systemd[1]: Reached target Remote File Systems (Pre).
[    4.640287] systemd[1]: Created slice User and Session Slice.
[    4.640296] systemd[1]: Reached target Remote File Systems.
[    4.640302] systemd[1]: Reached target User and Group Name Lookups.
[    4.640324] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.640369] systemd[1]: Created slice System Slice.
[    4.650818] systemd[1]: Starting Uncomplicated firewall...
[    4.650837] systemd[1]: Reached target Slices.
[    4.690764] systemd[1]: Mounting Huge Pages File System...
[    4.691186] systemd[1]: Starting Journal Service...
[    4.691502] systemd[1]: Mounting Debug File System...
[    4.774764] systemd[1]: Starting Load Kernel Modules...
[    4.775304] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.775780] systemd[1]: Started Read required files in advance.
[    4.776402] systemd[1]: Mounting POSIX Message Queue File System...
[    4.776949] systemd[1]: Started Braille Device Support.
[    4.777409] systemd[1]: Starting Set console keymap...
[    4.777476] systemd[1]: Listening on udev Control Socket.
[    4.823544] systemd[1]: Started Uncomplicated firewall.
[    4.910695] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    4.926772] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.084178] systemd[1]: Started Journal Service.
[    5.207086] lp: driver loaded but no devices found
[    5.238662] ppdev: user-space parallel port driver
[    6.306288] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.474096] systemd-journald[967]: Received request to flush runtime journal from PID 1
[    6.830575] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    6.830839] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[    6.830844] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    6.831033] nouveau 0000:01:00.0: DRM: evicting buffers...
[    6.831035] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[    6.831116] nouveau 0000:01:00.0: DRM: suspending client object trees...
[    6.831312] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[    7.025264] EDAC MC: Ver: 3.0.0
[    7.059452] EDAC ie31200: No ECC support
[    7.117317] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.741064] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    7.805388] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.805394] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.805397] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    7.805399] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    7.805401] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    7.805404] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x19
[    7.805407] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
[    7.816396] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[    7.816477] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[    7.940090] media: Linux media interface: v0.10
[    7.985793] AVX2 version of gcm_enc/dec engaged.
[    7.985796] AES CTR mode by8 optimization enabled
[    7.990527] Linux video capture interface: v2.00
[    8.156691] Bluetooth: Core ver 2.21
[    8.156708] NET: Registered protocol family 31
[    8.156710] Bluetooth: HCI device and connection manager initialized
[    8.156714] Bluetooth: HCI socket layer initialized
[    8.156717] Bluetooth: L2CAP socket layer initialized
[    8.156723] Bluetooth: SCO socket layer initialized
[    8.181293] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    8.181367] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    8.181433] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    8.310087] usbcore: registered new interface driver btusb
[    8.311146] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200
[    8.311148] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723a_fw.bin
[    8.358385] uvcvideo: Found UVC 1.00 device USB 2.0 Webcam Device (064e:9809)
[    8.363212] input: USB 2.0 Webcam Device as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input17
[    8.363266] usbcore: registered new interface driver uvcvideo
[    8.363268] USB Video Class driver (1.1.1)
[    8.403090] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[    8.458087] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    8.458268] rtlwifi: rtlwifi: wireless switch is on
[    8.460024] rtl8723ae 0000:05:00.0 wlp5s0: renamed from wlan0
[    8.467666] input: MSI WMI hotkeys as /devices/virtual/input/input18
[    8.808349] intel_rapl: Found RAPL domain package
[    8.808353] intel_rapl: Found RAPL domain core
[    8.808356] intel_rapl: Found RAPL domain uncore
[    8.808358] intel_rapl: Found RAPL domain dram
[    8.808362] intel_rapl: RAPL package 0 domain package locked by BIOS
[    8.808367] intel_rapl: RAPL package 0 domain dram locked by BIOS
[    9.242000] cfg80211: World regulatory domain updated:
[    9.242003] cfg80211:  DFS Master region: unset
[    9.242005] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    9.242007] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.242008] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.242009] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    9.242011] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    9.242012] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    9.242013] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    9.242014] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    9.242016] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    9.642566] Adding 2928636k swap on /dev/sda5.  Priority:-1 extents:1 across:2928636k FS
[   11.303071] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   11.409183] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   11.782339] audit: type=1400 audit(1552230851.476:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=2625 comm="apparmor_parser"
[   11.785896] audit: type=1400 audit(1552230851.480:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2622 comm="apparmor_parser"
[   11.785905] audit: type=1400 audit(1552230851.480:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2622 comm="apparmor_parser"
[   11.785911] audit: type=1400 audit(1552230851.480:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2622 comm="apparmor_parser"
[   11.785917] audit: type=1400 audit(1552230851.480:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2622 comm="apparmor_parser"
[   11.787748] audit: type=1400 audit(1552230851.484:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=2627 comm="apparmor_parser"
[   11.795071] audit: type=1400 audit(1552230851.492:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=2623 comm="apparmor_parser"
[   11.795080] audit: type=1400 audit(1552230851.492:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=2623 comm="apparmor_parser"
[   11.795085] audit: type=1400 audit(1552230851.492:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=2623 comm="apparmor_parser"
[   11.795090] audit: type=1400 audit(1552230851.492:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=2623 comm="apparmor_parser"
[   13.846112] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.846115] Bluetooth: BNEP filters: protocol multicast
[   13.846119] Bluetooth: BNEP socket layer initialized
[   17.341714] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   17.723682] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   17.752411] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   17.752855] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   17.754219] alx 0000:04:00.0 enp4s0: NIC Up: 100 Mbps Full
[   17.754515] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[   18.619892] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   19.057997] nouveau 0000:01:00.0: bus: MMIO write of 0000001f FAULT at 6013d4 [ IBUS ]
[   19.058019] nouveau 0000:01:00.0: bus: MMIO write of badf1001 FAULT at 50405c [ IBUS ]
[   24.818070] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   24.818345] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   24.818350] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   24.818544] nouveau 0000:01:00.0: DRM: evicting buffers...
[   24.830647] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   24.830677] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   24.830964] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[   27.476445] Bluetooth: RFCOMM TTY layer initialized
[   27.476453] Bluetooth: RFCOMM socket layer initialized
[   27.476458] Bluetooth: RFCOMM ver 1.11
[  292.270135] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[  471.278874] usb 3-1: new high-speed USB device number 6 using xhci_hcd
[  471.499013] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610
[  471.499020] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  471.499023] usb 3-1: Product: USB2.0 Hub
[  471.499026] usb 3-1: Manufacturer: GenesysLogic
[  471.499994] hub 3-1:1.0: USB hub found
[  471.500364] hub 3-1:1.0: 4 ports detected
[  471.607031] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[  471.626217] usb 4-1: New USB device found, idVendor=05e3, idProduct=0612
[  471.626221] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  471.626223] usb 4-1: Product: USB3.1 Hub
[  471.626224] usb 4-1: Manufacturer: GenesysLogic
[  471.628056] hub 4-1:1.0: USB hub found
[  471.628420] hub 4-1:1.0: 4 ports detected
[  471.898954] usb 4-1.3: new SuperSpeed USB device number 3 using xhci_hcd
[  471.915780] usb 4-1.3: New USB device found, idVendor=0480, idProduct=a200
[  471.915783] usb 4-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  471.915785] usb 4-1.3: Product: External USB 3.0
[  471.915786] usb 4-1.3: Manufacturer: TOSHIBA
[  471.915787] usb 4-1.3: SerialNumber: 20160918015101F
[  471.951253] usb-storage 4-1.3:1.0: USB Mass Storage device detected
[  471.951317] scsi host5: usb-storage 4-1.3:1.0
[  471.951387] usbcore: registered new interface driver usb-storage
[  471.957956] usbcore: registered new interface driver uas
[  472.953171] scsi 5:0:0:0: Direct-Access     TOSHIBA  External USB 3.0 0    PQ: 0 ANSI: 6
[  472.954126] sd 5:0:0:0: Attached scsi generic sg2 type 0
[  473.028706] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[  473.028940] sd 5:0:0:0: [sdb] Write Protect is off
[  473.028944] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  473.029167] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  473.036412]  sdb: sdb1
[  473.037495] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1877.015537] usb 4-1.3: USB disconnect, device number 3
[ 1877.017944] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[ 1877.017991] sd 5:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK

Dernière modification par crocodingo31 (Le 10/03/2019, à 16:55)

inbox · Le 09/03/2019, à 16:39

Relis bien mon dernier message et appliques ce qui y est écrit. Merci.

xubu1957 · Le 09/03/2019, à 16:41

Bonjour,

Pour ajouter toi-même les balises code à tes précédents messages #3 et #6 :

Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message

comme indiqué dans le : Retour utilisable de commande

crocodingo31 · Le 10/03/2019, à 16:51

j'ai modifié mon message
j'espère avoir bien compris la consigne
j'ai eu un gros plantage PC ce matin; impossible de redémarrer Ubuntu
du coups j'ai tout réinstallé et je suis revenu à la 16.04 LTS

inbox · Le 10/03/2019, à 21:34

Ton disque externe, est-il connecté via un hub (genre de multiprise) USB ?

Ton disque externe est-il branché avec un seul câble ou a-t-il un câble d'alimentation ?

crocodingo31 · Le 10/03/2019, à 21:50

oui il est branché à un hub USB branché à un câble d'alimentation

inbox · Le 10/03/2019, à 22:44

Essaye de brancher ton disque sans hub mais avec l'alimentation.

crocodingo31 · Le 11/03/2019, à 20:57

Voici les messages après avoir branché mon disque directement sur le PC:

[    0.000000] microcode: CPU0 microcode updated early to revision 0x25, date = 2018-04-02
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-142-generic (buildd@lgw01-amd64-033) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10) ) #168-Ubuntu SMP Wed Jan 16 21:00:45 UTC 2019 (Ubuntu 4.4.0-142.168-generic 4.4.167)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-142-generic root=UUID=4969c7c4-7bc6-43ce-9097-1c6c0e76ac7a ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bba08fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bba09000-0x00000000bba0ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bba10000-0x00000000bc0f5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc0f6000-0x00000000bc341fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc342000-0x00000000cb41bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb41c000-0x00000000cb4a5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cb4a6000-0x00000000cb5b3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb5b4000-0x00000000cba1ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cba20000-0x00000000cbffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. CX61 2PC/MS-16GD, BIOS E16GDIMS.60P 08/26/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7FE0000000 write-back
[    0.000000]   2 base 0220000000 mask 7FF0000000 write-back
[    0.000000]   3 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   5 base 00CE000000 mask 7FFE000000 uncachable
[    0.000000]   6 base 00CD000000 mask 7FFF000000 uncachable
[    0.000000]   7 base 022FE00000 mask 7FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 8GB, type WB
[    0.000000] reg 1, base: 8GB, range: 512MB, type WB
[    0.000000] reg 2, base: 8704MB, range: 256MB, type WB
[    0.000000] reg 3, base: 3584MB, range: 512MB, type UC
[    0.000000] reg 4, base: 3328MB, range: 256MB, type UC
[    0.000000] reg 5, base: 3296MB, range: 32MB, type UC
[    0.000000] reg 6, base: 3280MB, range: 16MB, type UC
[    0.000000] reg 7, base: 8958MB, range: 2MB, type UC
[    0.000000] total RAM covered: 8142M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 4M 	num_reg: 9  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 128MB, type WB
[    0.000000] reg 3, base: 3200MB, range: 64MB, type WB
[    0.000000] reg 4, base: 3264MB, range: 16MB, type WB
[    0.000000] reg 5, base: 4GB, range: 4GB, type WB
[    0.000000] reg 6, base: 8GB, range: 512MB, type WB
[    0.000000] reg 7, base: 8704MB, range: 256MB, type WB
[    0.000000] reg 8, base: 8958MB, range: 2MB, type UC
[    0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcc000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd7a0-0x000fd7af] mapped at [ffff8800000fd7a0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 28672
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x02215000, 0x02215fff] PGTABLE
[    0.000000] BRK [0x02216000, 0x02216fff] PGTABLE
[    0.000000] BRK [0x02217000, 0x02217fff] PGTABLE
[    0.000000] BRK [0x02218000, 0x02218fff] PGTABLE
[    0.000000] BRK [0x02219000, 0x02219fff] PGTABLE
[    0.000000] BRK [0x0221a000, 0x0221afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3339c000-0x359c5fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 MSI_NB)
[    0.000000] ACPI: XSDT 0x00000000CB6B8090 00009C (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000CB6C71F0 00010C (v05 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000CB6B81C0 00F02E (v02 MSI_NB MEGABOOK 00000014 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000CBA1E080 000040
[    0.000000] ACPI: APIC 0x00000000CB6C7300 000072 (v03 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000CB6C7378 000044 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: LPIT 0x00000000CB6C73C0 00005C (v01 MSI_NB MEGABOOK 00000000 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CB6C7420 000228 (v01 INTEL  sensrhub 00000000 INTL 20120711)
[    0.000000] ACPI: SLIC 0x00000000CB6C7648 000176 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000CB6C77C0 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000CB6C7D00 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: MCFG 0x00000000CB6C87D8 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CB6C8818 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CB6C8850 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000CB6C8B68 003562 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000CB6CC0D0 0015E0 (v01 SgRef  SgPeg    00001000 INTL 20120711)
[    0.000000] ACPI: MSFF 0x00000000CB6CD6B0 000029 (v01 MSI_NB MEGABOOK 00000010 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000CB6CD6E0 001399 (v01 OptRef OptTabl  00001000 INTL 20120711)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x22fdf6000-0x22fdfafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bba08fff]
[    0.000000]   node   0: [mem 0x00000000bba10000-0x00000000bc0f5fff]
[    0.000000]   node   0: [mem 0x00000000bc342000-0x00000000cb41bfff]
[    0.000000]   node   0: [mem 0x00000000cb4a6000-0x00000000cb5b3fff]
[    0.000000]   node   0: [mem 0x00000000cbfff000-0x00000000cbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
[    0.000000] On node 0 totalpages: 2076787
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12940 pages used for memmap
[    0.000000]   DMA32 zone: 828120 pages, LIFO batch:31
[    0.000000]   Normal zone: 19448 pages used for memmap
[    0.000000]   Normal zone: 1244672 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xcd200000-0xcf1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbba09000-0xbba0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc0f6000-0xbc341fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb41c000-0xcb4a5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb5b4000-0xcba1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcba20000-0xcbffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 34 pages/cpu @ffff88022fa00000 s99480 r8192 d31592 u524288
[    0.000000] pcpu-alloc: s99480 r8192 d31592 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2044313
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-142-generic root=UUID=4969c7c4-7bc6-43ce-9097-1c6c0e76ac7a ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8051480K/8307148K available (8603K kernel code, 1332K rwdata, 4004K rodata, 1484K init, 1316K bss, 255668K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.341 MHz processor
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.68 BogoMIPS (lpj=9977364)
[    0.000032] pid_max: default: 32768 minimum: 301
[    0.000037] ACPI: Core revision 20150930
[    0.013898] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.013916] Security Framework initialized
[    0.013918] Yama: becoming mindful.
[    0.013932] AppArmor: AppArmor initialized
[    0.014387] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.015780] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.016373] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.016382] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.016568] Initializing cgroup subsys io
[    0.016571] Initializing cgroup subsys memory
[    0.016576] Initializing cgroup subsys devices
[    0.016578] Initializing cgroup subsys freezer
[    0.016580] Initializing cgroup subsys net_cls
[    0.016582] Initializing cgroup subsys perf_event
[    0.016584] Initializing cgroup subsys net_prio
[    0.016587] Initializing cgroup subsys hugetlb
[    0.016588] Initializing cgroup subsys pids
[    0.016607] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.016608] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.017482] mce: CPU supports 7 MCE banks
[    0.017493] CPU0: Thermal monitoring enabled (TM1)
[    0.017501] process: using mwait in idle threads
[    0.017504] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.017505] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.017507] Spectre V2 : Mitigation: Full generic retpoline
[    0.017508] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.017509] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.017510] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.017511] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.017920] Freeing SMP alternatives memory: 32K
[    0.021748] ftrace: allocating 32277 entries in 127 pages
[    0.047502] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.047505] smpboot: Max logical packages: 2
[    0.047912] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.087600] TSC deadline timer enabled
[    0.087604] smpboot: CPU0: Intel(R) Core(TM) i3-4100M CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.087622] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.087641] ... version:                3
[    0.087642] ... bit width:              48
[    0.087643] ... generic registers:      4
[    0.087644] ... value mask:             0000ffffffffffff
[    0.087645] ... max period:             00007fffffffffff
[    0.087646] ... fixed-purpose events:   3
[    0.087647] ... event mask:             000000070000000f
[    0.088410] x86: Booting SMP configuration:
[    0.088412] .... node  #0, CPUs:      #1
[    0.089870] microcode: CPU1 microcode updated early to revision 0x25, date = 2018-04-02
[    0.092888] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.092962]  #2 #3
[    0.099488] x86: Booted up 1 node, 4 CPUs
[    0.099491] smpboot: Total of 4 processors activated (19954.72 BogoMIPS)
[    0.103024] devtmpfs: initialized
[    0.105077] evm: security.selinux
[    0.105079] evm: security.SMACK64
[    0.105080] evm: security.SMACK64EXEC
[    0.105081] evm: security.SMACK64TRANSMUTE
[    0.105082] evm: security.SMACK64MMAP
[    0.105083] evm: security.ima
[    0.105084] evm: security.capability
[    0.105143] PM: Registering ACPI NVS region [mem 0xbba09000-0xbba0ffff] (28672 bytes)
[    0.105145] PM: Registering ACPI NVS region [mem 0xcb5b4000-0xcba1ffff] (4636672 bytes)
[    0.105265] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.105275] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.105362] pinctrl core: initialized pinctrl subsystem
[    0.105462] RTC time: 17:08:59, date: 03/11/19
[    0.105585] NET: Registered protocol family 16
[    0.114881] cpuidle: using governor ladder
[    0.126871] cpuidle: using governor menu
[    0.126874] PCCT header not found.
[    0.126945] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.126947] ACPI: bus type PCI registered
[    0.126949] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.127017] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.127019] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.127028] PCI: Using configuration type 1 for base access
[    0.127059] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.139229] ACPI: Added _OSI(Module Device)
[    0.139231] ACPI: Added _OSI(Processor Device)
[    0.139232] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.139234] ACPI: Added _OSI(Processor Aggregator Device)
[    0.141893] ACPI Error: No handler for Region [EC__] (ffff8802271b4c18) [EmbeddedControl] (20150930/evregion-163)
[    0.141897] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20150930/exfldio-297)
[    0.141901] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC._REG] (Node ffff8802271b5488), AE_NOT_EXIST (20150930/psparse-542)
[    0.142968] ACPI: Executed 1 blocks of module-level executable AML code
[    0.146099] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.147231] ACPI: Dynamic OEM Table Load:
[    0.147237] ACPI: SSDT 0xFFFF880225E17C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.147959] ACPI: Dynamic OEM Table Load:
[    0.147964] ACPI: SSDT 0xFFFF880225E1A800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.148710] ACPI: Dynamic OEM Table Load:
[    0.148714] ACPI: SSDT 0xFFFF880225E5E600 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.149822] ACPI : EC: EC started
[    0.150988] ACPI: Interpreter enabled
[    0.151013] ACPI: (supports S0 S3 S4 S5)
[    0.151014] ACPI: Using IOAPIC for interrupt routing
[    0.151038] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.158884] ACPI: Power Resource [NVP3] (on)
[    0.158914] ACPI: Power Resource [NVP2] (on)
[    0.162364] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.162370] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.162847] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.162849] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.163254] PCI host bridge to bus 0000:00
[    0.163257] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.163259] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.163261] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.163263] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.163265] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.163266] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.163268] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.163270] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.163272] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.163274] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[    0.163276] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.163284] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.163378] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.163411] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.163494] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.163527] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
[    0.163558] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.163634] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.163671] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.163684] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.163690] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.163695] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.163773] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.163785] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
[    0.163886] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.163913] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[    0.163963] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.164005] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.164040] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.164067] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1e000-0xf7a1e00f 64bit]
[    0.164119] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.164198] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.164226] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
[    0.164295] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.164349] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.164386] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.164412] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[    0.164469] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.164546] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.164609] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.164681] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.164719] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.164782] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.164853] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.164890] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[    0.164953] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.165024] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.165063] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.165091] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
[    0.165162] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.165215] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.165252] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.165418] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.165439] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.165447] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.165455] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.165463] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.165471] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.165479] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
[    0.165507] pci 0000:00:1f.2: PME# supported from D3hot
[    0.165577] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.165594] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
[    0.165614] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.165743] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[    0.165764] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.165775] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.165786] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.165794] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.165801] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.165884] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.170921] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.170924] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.170927] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.170930] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.170958] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.171018] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.171091] pci 0000:04:00.0: [1969:1091] type 00 class 0x020000
[    0.171141] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
[    0.171154] pci 0000:04:00.0: reg 0x18: [io  0xd000-0xd07f]
[    0.171248] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.171282] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.178928] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.178932] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.178936] pci 0000:00:1c.3:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.179014] pci 0000:05:00.0: [10ec:8723] type 00 class 0x028000
[    0.179056] pci 0000:05:00.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.179088] pci 0000:05:00.0: reg 0x18: [mem 0xf7800000-0xf7803fff 64bit]
[    0.179185] pci 0000:05:00.0: supports D1 D2
[    0.179187] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.179224] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.186932] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.186936] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.186941] pci 0000:00:1c.5:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.188336] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.188382] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.188427] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.188473] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.188516] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.188561] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.188604] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.188647] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.188808] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.188848] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.188955] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.188957] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.188960] vgaarb: loaded
[    0.188962] vgaarb: bridge control possible 0000:00:02.0
[    0.189157] SCSI subsystem initialized
[    0.189194] libata version 3.00 loaded.
[    0.189216] ACPI: bus type USB registered
[    0.189229] usbcore: registered new interface driver usbfs
[    0.189237] usbcore: registered new interface driver hub
[    0.189251] usbcore: registered new device driver usb
[    0.189382] PCI: Using ACPI for IRQ routing
[    0.190685] PCI: pci_cache_line_size set to 64 bytes
[    0.190736] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[    0.190738] e820: reserve RAM buffer [mem 0xbba09000-0xbbffffff]
[    0.190739] e820: reserve RAM buffer [mem 0xbc0f6000-0xbfffffff]
[    0.190741] e820: reserve RAM buffer [mem 0xcb41c000-0xcbffffff]
[    0.190742] e820: reserve RAM buffer [mem 0xcb5b4000-0xcbffffff]
[    0.190744] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[    0.190844] NetLabel: Initializing
[    0.190846] NetLabel:  domain hash size = 128
[    0.190846] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.190857] NetLabel:  unlabeled traffic allowed by default
[    0.190929] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.190934] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.192946] amd_nb: Cannot enumerate AMD northbridges
[    0.192971] clocksource: Switched to clocksource hpet
[    0.198322] AppArmor: AppArmor Filesystem Enabled
[    0.198382] pnp: PnP ACPI init
[    0.198473] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.198478] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.198636] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.198639] system 00:01: [io  0xffff] has been reserved
[    0.198641] system 00:01: [io  0xffff] has been reserved
[    0.198643] system 00:01: [io  0xffff] has been reserved
[    0.198645] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.198647] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.198649] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.198651] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.198653] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.198655] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.198658] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.198681] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.198727] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.198730] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.198779] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.198781] system 00:04: [io  0x034c-0x034f] has been reserved
[    0.198783] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.199351] pnp 00:05: Plug and Play ACPI device, IDs PNP030b (active)
[    0.199388] pnp 00:06: Plug and Play ACPI device, IDs ETD0300 PNP0f13 (active)
[    0.199834] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.199837] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.199839] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.199841] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.199843] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.199845] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.199847] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.199849] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.199851] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.199854] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.199856] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.199858] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.199861] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.200057] pnp: PnP ACPI: found 8 devices
[    0.206259] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.206281] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.206284] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.206286] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.206302] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.206305] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.206307] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.206309] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.206311] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.206313] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.206318] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
[    0.206325] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
[    0.206329] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.206331] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.206334] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.206337] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.206340] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.206344] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.206350] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.206354] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.206358] pci 0000:00:1c.0:   bridge window [mem 0xcf200000-0xcf3fffff]
[    0.206362] pci 0000:00:1c.0:   bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
[    0.206369] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.206372] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.206377] pci 0000:00:1c.3:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.206385] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.206387] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.206392] pci 0000:00:1c.5:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.206401] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.206403] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.206405] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.206407] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.206409] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.206411] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.206413] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.206415] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.206416] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.206418] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff window]
[    0.206420] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.206422] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.206424] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.206426] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.206428] pci_bus 0000:03: resource 1 [mem 0xcf200000-0xcf3fffff]
[    0.206430] pci_bus 0000:03: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
[    0.206432] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.206433] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff]
[    0.206435] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.206437] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.206466] NET: Registered protocol family 2
[    0.206610] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.206711] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.206826] TCP: Hash tables configured (established 65536 bind 65536)
[    0.206848] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.206870] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.206919] NET: Registered protocol family 1
[    0.206936] pci 0000:00:02.0: Video device with shadowed ROM
[    0.245073] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.245081] PCI: CLS 64 bytes, default 64
[    0.245123] Unpacking initramfs...
[    0.767306] Freeing initrd memory: 39080K
[    0.767333] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.767337] software IO TLB [mem 0xc741c000-0xcb41c000] (64MB) mapped at [ffff8800c741c000-ffff8800cb41bfff]
[    0.767407] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[    0.767408] hw unit of domain pp0-core 2^-14 Joules
[    0.767409] hw unit of domain package 2^-14 Joules
[    0.767411] hw unit of domain dram 2^-14 Joules
[    0.767412] hw unit of domain pp1-gpu 2^-14 Joules
[    0.767511] Scanning for low memory corruption every 60 seconds
[    0.767841] audit: initializing netlink subsys (disabled)
[    0.767855] audit: type=2000 audit(1552324139.764:1): initialized
[    0.768218] Initialise system trusted keyring
[    0.768331] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.768333] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.769609] zbud: loaded
[    0.769918] VFS: Disk quotas dquot_6.6.0
[    0.769947] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.770170] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.770387] fuse init (API version 7.23)
[    0.770513] Key type big_key registered
[    0.770534] Allocating IMA MOK and blacklist keyrings.
[    0.770947] Key type asymmetric registered
[    0.770949] Asymmetric key parser 'x509' registered
[    0.770980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.771015] io scheduler noop registered
[    0.771018] io scheduler deadline registered (default)
[    0.771045] io scheduler cfq registered
[    0.771791] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.771794] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.771797] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.771809] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[    0.771811] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
[    0.771831] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.771835] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.771854] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.771856] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.771860] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.771880] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.771881] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    0.771886] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.771892] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.771904] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.771930] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[    0.771934] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.771968] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    0.771969] vesafb: scrolling: redraw
[    0.771971] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.771982] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 4160k, total 4160k
[    0.772063] Console: switching to colour frame buffer device 170x48
[    0.772077] fb0: VESA VGA frame buffer device
[    0.772094] intel_idle: MWAIT substates: 0x42120
[    0.772096] intel_idle: v0.4.1 model 0x3C
[    0.772097] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.772613] ACPI: AC Adapter [ADP1] (on-line)
[    0.772694] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input0
[    0.772884] ACPI: Lid Switch [LID0]
[    0.772984] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.772988] ACPI: Power Button [PWRB]
[    0.773021] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.773023] ACPI: Sleep Button [SLPB]
[    0.773054] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.773056] ACPI: Power Button [PWRF]
[    0.774097] thermal LNXTHERM:00: registered as thermal_zone0
[    0.774100] ACPI: Thermal Zone [THRM] (25 C)
[    0.774165] GHES: HEST is not enabled!
[    0.774285] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.776173] Linux agpgart interface v0.103
[    0.777676] loop: module loaded
[    0.777853] libphy: Fixed MDIO Bus: probed
[    0.777856] tun: Universal TUN/TAP device driver, 1.6
[    0.777857] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.777889] PPP generic driver version 2.4.2
[    0.777943] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.777947] ehci-pci: EHCI PCI platform driver
[    0.778049] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.778054] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.778066] ehci-pci 0000:00:1a.0: debug port 2
[    0.781964] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.781975] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000
[    0.792975] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.793016] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.793019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.793021] usb usb1: Product: EHCI Host Controller
[    0.793022] usb usb1: Manufacturer: Linux 4.4.0-142-generic ehci_hcd
[    0.793024] usb usb1: SerialNumber: 0000:00:1a.0
[    0.793204] hub 1-0:1.0: USB hub found
[    0.793211] hub 1-0:1.0: 2 ports detected
[    0.793414] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.793420] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.793431] ehci-pci 0000:00:1d.0: debug port 2
[    0.797343] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.797352] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
[    0.809010] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.809059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.809061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.809063] usb usb2: Product: EHCI Host Controller
[    0.809065] usb usb2: Manufacturer: Linux 4.4.0-142-generic ehci_hcd
[    0.809067] usb usb2: SerialNumber: 0000:00:1d.0
[    0.809269] hub 2-0:1.0: USB hub found
[    0.809275] hub 2-0:1.0: 2 ports detected
[    0.809403] ehci-platform: EHCI generic platform driver
[    0.809422] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.809426] ohci-pci: OHCI PCI platform driver
[    0.809439] ohci-platform: OHCI generic platform driver
[    0.809449] uhci_hcd: USB Universal Host Controller Interface driver
[    0.809574] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.809580] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.810666] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.810671] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.810755] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.810757] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.810759] usb usb3: Product: xHCI Host Controller
[    0.810761] usb usb3: Manufacturer: Linux 4.4.0-142-generic xhci-hcd
[    0.810763] usb usb3: SerialNumber: 0000:00:14.0
[    0.810941] hub 3-0:1.0: USB hub found
[    0.810958] hub 3-0:1.0: 14 ports detected
[    0.812845] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.812848] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.812881] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.812883] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.812885] usb usb4: Product: xHCI Host Controller
[    0.812887] usb usb4: Manufacturer: Linux 4.4.0-142-generic xhci-hcd
[    0.812888] usb usb4: SerialNumber: 0000:00:14.0
[    0.813045] hub 4-0:1.0: USB hub found
[    0.813057] hub 4-0:1.0: 4 ports detected
[    0.813446] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.834613] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.834617] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.834901] mousedev: PS/2 mouse device common for all mice
[    0.835697] rtc_cmos 00:02: RTC can wake from S4
[    0.835832] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.835859] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.835867] i2c /dev entries driver
[    0.835914] device-mapper: uevent: version 1.0.3
[    0.836045] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.836066] Intel P-state driver initializing.
[    0.836241] ledtrig-cpu: registered to indicate activity on CPUs
[    0.837321] NET: Registered protocol family 10
[    0.837799] NET: Registered protocol family 17
[    0.837832] Key type dns_resolver registered
[    0.838332] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x25
[    0.838359] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x25
[    0.838396] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x25
[    0.838409] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x25
[    0.838510] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.838918] registered taskstats version 1
[    0.838958] Loading compiled-in X.509 certificates
[    0.841101] Loaded X.509 cert 'Build time autogenerated kernel key: bff73e56bc0efa7435b2a24f5427674623f1be80'
[    0.841121] zswap: loaded using pool lzo/zbud
[    0.842902] Key type trusted registered
[    0.845938] Key type encrypted registered
[    0.845945] AppArmor: AppArmor sha1 policy hashing enabled
[    0.845948] ima: No TPM chip found, activating TPM-bypass!
[    0.845955] ima: Allocated hash algorithm: sha1
[    0.845968] evm: HMAC attrs: 0x1
[    0.846463]   Magic number: 11:674:137
[    0.846470] usb usb4-port2: hash matches
[    0.846788] rtc_cmos 00:02: setting system clock to 2019-03-11 17:09:00 UTC (1552324140)
[    0.846861] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.846863] EDD information not available.
[    0.846932] PM: Hibernation image not present or could not be loaded.
[    0.857634] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.881027] ACPI: Battery Slot [BAT1] (battery present)
[    0.882028] Freeing unused kernel memory: 1484K
[    0.893016] Write protecting the kernel read-only data: 14336k
[    0.893382] Freeing unused kernel memory: 1624K
[    0.893613] Freeing unused kernel memory: 92K
[    0.903864] random: systemd-udevd: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[    0.903940] random: systemd-udevd: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[    0.903952] random: systemd-udevd: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[    0.904388] random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[    0.904413] random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[    0.909731] random: systemd-udevd: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[    0.909749] random: systemd-udevd: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[    0.909758] random: systemd-udevd: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[    0.909979] random: systemd-udevd: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[    0.910002] random: systemd-udevd: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[    0.950074] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.950618] wmi: Mapper loaded
[    0.969951] [drm] Initialized drm 1.1.0 20060810
[    0.970744] ahci 0000:00:1f.2: version 3.0
[    0.970925] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
[    0.970929] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.978092] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [44:8a:5b:ef:f2:bd]
[    0.980224] scsi host0: ahci
[    0.981289] scsi host1: ahci
[    0.983341] scsi host2: ahci
[    0.983435] scsi host3: ahci
[    0.983519] scsi host4: ahci
[    0.983562] ata1: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a100 irq 30
[    0.983564] ata2: DUMMY
[    0.983565] ata3: DUMMY
[    0.983566] ata4: DUMMY
[    0.983569] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 30
[    1.012800] [drm] Memory usable by graphics device = 2048M
[    1.012806] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[    1.012808] fb: switching to inteldrmfb from VESA VGA
[    1.012840] Console: switching to colour dummy device 80x25
[    1.012924] [drm] Replacing VGA console driver
[    1.013820] alx 0000:04:00.0 enp4s0: renamed from eth0
[    1.015912] MXM: GUID detected in BIOS
[    1.015972] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    1.016021] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    1.016222] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    1.016225] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    1.016358] nouveau 0000:01:00.0: NVIDIA GF117 (0d7000a2)
[    1.019284] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.019288] [drm] Driver supports precise vblank timestamp query.
[    1.020222] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.037029] nouveau 0000:01:00.0: bios: version 75.17.82.00.08
[    1.103652] fbcon: inteldrmfb (fb0) is primary device
[    1.103724] Console: switching to colour frame buffer device 170x48
[    1.103747] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.104278] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.106081] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.106087] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    1.106091] ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff8802271fa050), AE_NOT_FOUND (20150930/psparse-542)
[    1.106244] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:50/LNXVIDEO:00/input/input7
[    1.108335] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.108714] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[    1.108803] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    1.132944] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.132956] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.132970] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.191445] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[    1.229478] vga_switcheroo: enabled
[    1.229568] [TTM] Zone  kernel: Available graphics memory: 4046896 kiB
[    1.229569] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.229570] [TTM] Initializing pool allocator
[    1.229576] [TTM] Initializing DMA pool allocator
[    1.229590] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    1.229592] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    1.229596] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[    1.229598] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    1.229600] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[    1.268077] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610
[    1.268081] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.268083] usb 3-1: Product: USB2.0 Hub
[    1.268085] usb 3-1: Manufacturer: GenesysLogic
[    1.268566] hub 3-1:1.0: USB hub found
[    1.268878] hub 3-1:1.0: 4 ports detected
[    1.269265] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.269268] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.269297] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.269300] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.269545] hub 1-1:1.0: USB hub found
[    1.269595] hub 2-1:1.0: USB hub found
[    1.269621] hub 1-1:1.0: 6 ports detected
[    1.269790] hub 2-1:1.0: 8 ports detected
[    1.316351] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    1.316357] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    1.320984] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.324751] ata1.00: ATAPI: TSSTcorp CDDVDW SN-208FB, TM00, max UDMA/100
[    1.327441] ata1.00: configured for UDMA/100
[    1.332980] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.333647] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    1.333654] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802271eafc8), AE_NOT_FOUND (20150930/psparse-542)
[    1.333901] ata5.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
[    1.333904] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.334660] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    1.334666] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802271eafc8), AE_NOT_FOUND (20150930/psparse-542)
[    1.334912] ata5.00: configured for UDMA/133
[    1.336035] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208FB  TM00 PQ: 0 ANSI: 5
[    1.363887] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.363891] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.364029] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.364099] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.364287] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5
[    1.364432] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.364436] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.364466] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.364495] sd 4:0:0:0: [sda] Write Protect is off
[    1.364499] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.364523] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.377097] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.396240] usb 4-1: New USB device found, idVendor=05e3, idProduct=0612
[    1.396244] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.396246] usb 4-1: Product: USB3.1 Hub
[    1.396248] usb 4-1: Manufacturer: GenesysLogic
[    1.397175] hub 4-1:1.0: USB hub found
[    1.397474] hub 4-1:1.0: 4 ports detected
[    1.450047]  sda: sda1 sda2 < sda5 sda6 >
[    1.450809] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.560962] usb 3-2: new low-speed USB device number 3 using xhci_hcd
[    1.749781] usb 3-2: New USB device found, idVendor=04f3, idProduct=0103
[    1.749785] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.749894] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.749898] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.753326] hidraw: raw HID events driver (C) Jiri Kosina
[    1.760797] usbcore: registered new interface driver usbhid
[    1.760799] usbhid: USB HID core driver
[    1.762125] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:04F3:0103.0001/input/input9
[    1.762200] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-0000:00:14.0-2/input0
[    1.763154] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:04F3:0103.0002/input/input10
[    1.763217] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.11 Device [HID 04f3:0103] on usb-0000:00:14.0-2/input1
[    1.764923] tsc: Refined TSC clocksource calibration: 2494.225 MHz
[    1.764926] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3ea95b09, max_idle_ns: 440795287034 ns
[    1.864981] usb 3-3: new high-speed USB device number 4 using xhci_hcd
[    2.081073] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x550f00)
[    2.103908] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x15, 0x0c.
[    2.127764] psmouse serio1: elantech: Elan sample query result 00, 5a, 96
[    2.154227] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[    2.154248] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[    2.169907] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe B
[    2.169930] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
[    2.230186] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.241839] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[    2.309413] usb 3-3: New USB device found, idVendor=0bda, idProduct=0138
[    2.309416] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.309418] usb 3-3: Product: USB2.0-CRW
[    2.309420] usb 3-3: Manufacturer: Generic
[    2.309422] usb 3-3: SerialNumber: 20090516388200000
[    2.480950] usb 3-6: new low-speed USB device number 5 using xhci_hcd
[    2.672600] usb 3-6: New USB device found, idVendor=04d9, idProduct=1133
[    2.672603] usb 3-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.672719] usb 3-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.679879] input: HID 04d9:1133 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:04D9:1133.0003/input/input11
[    2.680046] hid-generic 0003:04D9:1133.0003: input,hidraw2: USB HID v1.10 Mouse [HID 04d9:1133] on usb-0000:00:14.0-6/input0
[    2.729135] random: nonblocking pool is initialized
[    2.765034] clocksource: Switched to clocksource tsc
[    2.848888] usb 3-7: new full-speed USB device number 6 using xhci_hcd
[    2.977813] usb 3-7: New USB device found, idVendor=13d3, idProduct=3394
[    2.977817] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.977819] usb 3-7: Product: RT Bluetooth Radio
[    2.977820] usb 3-7: Manufacturer: Realtek
[    2.977822] usb 3-7: SerialNumber: 00e04c000001
[    3.144849] usb 3-8: new high-speed USB device number 7 using xhci_hcd
[    3.287024] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.287172] systemd[1]: Detected architecture x86-64.
[    3.300750] systemd[1]: Set hostname to <jacquin-CX61-2PC>.
[    3.328239] usb 3-8: New USB device found, idVendor=064e, idProduct=9809
[    3.328242] usb 3-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.328244] usb 3-8: Product: USB 2.0 Webcam Device
[    3.328246] usb 3-8: Manufacturer: SuYin
[    3.328248] usb 3-8: SerialNumber: HF1016-T840-HN03-1-REV0100
[    5.613435] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.613487] systemd[1]: Reached target Remote File Systems (Pre).
[    5.613520] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.613552] systemd[1]: Listening on udev Control Socket.
[    5.613642] systemd[1]: Created slice System Slice.
[    5.613675] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.613706] systemd[1]: Listening on Journal Socket.
[    5.624872] systemd[1]: Mounting Debug File System...
[    5.625372] systemd[1]: Mounting Huge Pages File System...
[    5.626064] systemd[1]: Started Read required files in advance.
[    5.626585] systemd[1]: Started Braille Device Support.
[    5.627065] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.627090] systemd[1]: Reached target Remote File Systems.
[    5.627440] systemd[1]: Starting Uncomplicated firewall...
[    5.627513] systemd[1]: Created slice User and Session Slice.
[    5.627550] systemd[1]: Listening on udev Kernel Socket.
[    5.627966] systemd[1]: Mounting POSIX Message Queue File System...
[    5.628024] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.628515] systemd[1]: Starting Set console keymap...
[    5.628596] systemd[1]: Listening on Journal Audit Socket.
[    5.628629] systemd[1]: Reached target Encrypted Volumes.
[    5.628657] systemd[1]: Listening on Syslog Socket.
[    5.629021] systemd[1]: Starting Journal Service...
[    5.629035] systemd[1]: Reached target Slices.
[    5.788846] systemd[1]: Starting Load Kernel Modules...
[    5.788906] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    5.789092] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.843676] systemd[1]: Reached target User and Group Name Lookups.
[    5.852860] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.853998] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.854174] systemd[1]: Started Uncomplicated firewall.
[    5.854611] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.281575] systemd[1]: Mounted Huge Pages File System.
[    6.281605] systemd[1]: Mounted POSIX Message Queue File System.
[    6.281618] systemd[1]: Mounted Debug File System.
[    6.425953] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.426610] systemd[1]: Started Remount Root and Kernel File Systems.
[    6.436854] systemd[1]: Starting Load/Save Random Seed...
[    6.620815] systemd[1]: Starting udev Coldplug all Devices...
[    6.667869] lp: driver loaded but no devices found
[    6.682618] ppdev: user-space parallel port driver
[    6.728747] systemd[1]: Started Journal Service.
[    6.812760] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    6.813048] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[    6.813053] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    6.813255] nouveau 0000:01:00.0: DRM: evicting buffers...
[    6.813258] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[    6.813339] nouveau 0000:01:00.0: DRM: suspending client object trees...
[    6.813534] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[    7.199846] systemd-journald[240]: Received request to flush runtime journal from PID 1
[   10.867119] audit: type=1400 audit(1552324150.514:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=424 comm="apparmor_parser"
[   11.149582] audit: type=1400 audit(1552324150.798:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=421 comm="apparmor_parser"
[   11.150097] audit: type=1400 audit(1552324150.798:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=421 comm="apparmor_parser"
[   11.150646] audit: type=1400 audit(1552324150.798:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=421 comm="apparmor_parser"
[   11.151158] audit: type=1400 audit(1552324150.798:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=421 comm="apparmor_parser"
[   11.494302] EDAC MC: Ver: 3.0.0
[   11.545887] EDAC ie31200: No ECC support
[   11.571465] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.661085] audit: type=1400 audit(1552324151.310:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=420 comm="apparmor_parser"
[   11.678145] audit: type=1400 audit(1552324151.326:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=420 comm="apparmor_parser"
[   11.860231] audit: type=1400 audit(1552324151.506:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=446 comm="apparmor_parser"
[   11.860562] audit: type=1400 audit(1552324151.510:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=446 comm="apparmor_parser"
[   11.950170] Bluetooth: Core ver 2.21
[   11.950189] NET: Registered protocol family 31
[   11.950191] Bluetooth: HCI device and connection manager initialized
[   11.950195] Bluetooth: HCI socket layer initialized
[   11.950199] Bluetooth: L2CAP socket layer initialized
[   11.950205] Bluetooth: SCO socket layer initialized
[   12.148591] usbcore: registered new interface driver btusb
[   12.157743] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200
[   12.157748] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723a_fw.bin
[   12.248011] audit: type=1400 audit(1552324151.894:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=490 comm="apparmor_parser"
[   12.307370] usbcore: registered new interface driver usb-storage
[   12.343535] usbcore: registered new interface driver uas
[   12.365053] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   12.402287] ums-realtek 3-3:1.0: USB Mass Storage device detected
[   12.406568] media: Linux media interface: v0.10
[   12.418122] usb 3-3: USB disconnect, device number 4
[   12.418942] scsi host5: usb-storage 3-3:1.0
[   12.419057] usbcore: registered new interface driver ums-realtek
[   12.479401] Linux video capture interface: v2.00
[   12.563848] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   12.563854] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.563857] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   12.563860] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   12.563863] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   12.563866] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x19
[   12.563870] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
[   12.570496] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[   12.570587] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[   12.813643] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[   12.813701] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[   12.813752] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[   13.206868] input: MSI WMI hotkeys as /devices/virtual/input/input17
[   13.259264] AVX2 version of gcm_enc/dec engaged.
[   13.259268] AES CTR mode by8 optimization enabled
[   13.334123] uvcvideo: Found UVC 1.00 device USB 2.0 Webcam Device (064e:9809)
[   13.339302] input: USB 2.0 Webcam Device as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input18
[   13.339380] usbcore: registered new interface driver uvcvideo
[   13.339382] USB Video Class driver (1.1.1)
[   13.690680] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[   13.778793] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   13.778987] rtlwifi: rtlwifi: wireless switch is on
[   13.780269] rtl8723ae 0000:05:00.0 wlp5s0: renamed from wlan0
[   14.425371] intel_rapl: Found RAPL domain package
[   14.425374] intel_rapl: Found RAPL domain core
[   14.425375] intel_rapl: Found RAPL domain uncore
[   14.425377] intel_rapl: Found RAPL domain dram
[   14.425379] intel_rapl: RAPL package 0 domain package locked by BIOS
[   14.425381] intel_rapl: RAPL package 0 domain dram locked by BIOS
[   14.480267] cfg80211: World regulatory domain updated:
[   14.480271] cfg80211:  DFS Master region: unset
[   14.480272] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   14.480274] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   14.480277] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   14.480278] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   14.480280] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   14.480282] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   14.480284] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   14.480285] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   14.480287] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   16.828377] Adding 2928636k swap on /dev/sda5.  Priority:-1 extents:1 across:2928636k FS
[   19.322793] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   19.429186] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   21.839513] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.839515] Bluetooth: BNEP filters: protocol multicast
[   21.839519] Bluetooth: BNEP socket layer initialized
[   24.387396] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   24.769649] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   24.788991] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   24.789359] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   24.790228] alx 0000:04:00.0 enp4s0: NIC Up: 100 Mbps Full
[   24.790434] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[   25.652179] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   26.310314] nouveau 0000:01:00.0: bus: MMIO write of 0000001f FAULT at 6013d4 [ IBUS ]
[   32.047553] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   32.047857] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   32.047862] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   32.048068] nouveau 0000:01:00.0: DRM: evicting buffers...
[   32.060307] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   32.060340] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   32.060652] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[   39.296951] Bluetooth: RFCOMM TTY layer initialized
[   39.296958] Bluetooth: RFCOMM socket layer initialized
[   39.296963] Bluetooth: RFCOMM ver 1.11
[  112.185769] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[  143.274465] usb 4-1.3: new SuperSpeed USB device number 3 using xhci_hcd
[  143.291327] usb 4-1.3: New USB device found, idVendor=0480, idProduct=a200
[  143.291334] usb 4-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  143.291338] usb 4-1.3: Product: External USB 3.0
[  143.291342] usb 4-1.3: Manufacturer: TOSHIBA
[  143.291346] usb 4-1.3: SerialNumber: 20160918015101F
[  143.291984] usb-storage 4-1.3:1.0: USB Mass Storage device detected
[  143.292116] scsi host6: usb-storage 4-1.3:1.0
[  144.290589] scsi 6:0:0:0: Direct-Access     TOSHIBA  External USB 3.0 0    PQ: 0 ANSI: 6
[  144.290905] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  146.605225] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[  146.605483] sd 6:0:0:0: [sdb] Write Protect is off
[  146.605486] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  146.605703] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  146.612959]  sdb: sdb1
[  146.614673] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 4921.491271] usb 3-1.4: new high-speed USB device number 8 using xhci_hcd
[ 4921.581252] usb 3-1.4: New USB device found, idVendor=8564, idProduct=1000
[ 4921.581256] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4921.581258] usb 3-1.4: Product: Mass Storage Device
[ 4921.581260] usb 3-1.4: Manufacturer: JetFlash
[ 4921.581262] usb 3-1.4: SerialNumber: 690SNLHOEWCRA2VX
[ 4921.581470] usb 3-1.4: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 4921.581477] usb 3-1.4: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 4921.581976] usb-storage 3-1.4:1.0: USB Mass Storage device detected
[ 4921.582042] scsi host7: usb-storage 3-1.4:1.0
[ 4922.801330] scsi 7:0:0:0: Direct-Access     JetFlash Transcend 16GB   1100 PQ: 0 ANSI: 4
[ 4922.802276] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 4922.804785] sd 7:0:0:0: [sdc] 31703040 512-byte logical blocks: (16.2 GB/15.1 GiB)
[ 4922.805277] sd 7:0:0:0: [sdc] Write Protect is off
[ 4922.805288] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 4922.805773] sd 7:0:0:0: [sdc] No Caching mode page found
[ 4922.805782] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4922.809846]  sdc: sdc1
[ 4922.814121] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 4923.024380] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 9802.721807] perf interrupt took too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 9964.956247] usb 3-1: USB disconnect, device number 2
[ 9964.956251] usb 3-1.4: USB disconnect, device number 8
[ 9965.682078] usb 4-1: USB disconnect, device number 2
[ 9965.682084] usb 4-1.3: USB disconnect, device number 3
[ 9965.684389] sd 6:0:0:0: [sdb] Synchronizing SCSI cache
[ 9965.684439] sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 9973.934391] usb 4-1: new SuperSpeed USB device number 4 using xhci_hcd
[ 9973.951729] usb 4-1: New USB device found, idVendor=152d, idProduct=0539
[ 9973.951734] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9973.951737] usb 4-1: Product: USB to ATA/ATAPI Brid
[ 9973.951740] usb 4-1: Manufacturer: JMicron
[ 9973.951743] usb 4-1: SerialNumber: 00A123456789
[ 9973.954572] scsi host8: uas
[ 9980.721533] scsi 8:0:0:0: Direct-Access     JMicron                   0501 PQ: 0 ANSI: 6
[ 9980.723016] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 9980.723696] sd 8:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 9980.723700] sd 8:0:0:0: [sdb] 4096-byte physical blocks
[ 9980.726118] sd 8:0:0:0: [sdb] Write Protect is off
[ 9980.726125] sd 8:0:0:0: [sdb] Mode Sense: 5f 00 00 08
[ 9980.728015] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9980.769064]  sdb: sdb1
[ 9980.770807] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 9981.076724] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 9986.534283] FAT-fs (sdb1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 9986.534288] FAT-fs (sdb1): Filesystem has been set read-only

inbox · Le 12/03/2019, à 14:38

Les trois dernières lignes indiques un problème du système de fichiers :

FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
FAT-fs (sdb1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
FAT-fs (sdb1): Filesystem has been set read-only

Y est indiqué que le disque n'a pas été démonté proprement (démontage logique via le navigateur de fichiers). Il y a au moins un cluster qui nécessite une réparation. Par conséquent, ta partition est passée en lecture seule par le système.

Il faut d'abord démonter ton disque logiquement avec :

sudo umount /dev/sdb1

Lancer une réparation du système de fichiers avec :

sudo fsck /dev/sdb1

Donne le retour de ces commandes, que je puisse voir si la réparation est OK ou pas.

Il faut, à l'avenir que tu ne branches plus un disque dur externe sur un hub. Je croise, sur le forum, plusieurs fois par an, des personnes ayant des "faux" problèmes de disque externe parce qu'ils ont utilisé un hub USB. Tu peux l'utiliser pour des périphériques ne consommant que peu comme : souris, clavier. Si tu veux utiliser un hub pour connecter un disque dur externe, il faut un hub ayant sa propre alimentation électrique.

crocodingo31 · Le 12/03/2019, à 15:13

Bonjour
Merci je vais regarder cela (quand j'aurai un peu de temps).
Alors de mémoire je crois que l'erreur est survenue après que j'ai tenté de copier des fichiers sur ce disque dur. C'était long pour des fichiers de petite taille, cela a planté et j'ai du faire une mauvaise manipulation.
Ensuite c'est bizarre car il y a un répertoire (défaillant) auquel j'accède via le terminal et je n'y arrive pas via le navigateur de fichiers; comment cela se fait ?
Concernant le hub: il est aussi alimenté par sa propre prise électrique.(le vendeur me l'avait fortement conseillé).

crocodingo31 · Le 12/03/2019, à 18:14

Voici le résultat:

fsck de util-linux 2.27.1
fsck.fat 3.0.28 (2015-05-16)
0x41: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
1) Remove dirty bit
2) No action

inbox · Le 12/03/2019, à 20:39

Il n'y a eu que ça comme message ?

crocodingo31 · Le 13/03/2019, à 09:19

Oui !

inbox · Le 13/03/2019, à 10:33

Si la question est toujours en attente, réponds "2".

Essaye avec dosfsck en passant les commandes indiquées au §3.

crocodingo31 · Le 13/03/2019, à 18:27

Voici l'historique:

sudo fsck /dev/sdb1
fsck de util-linux 2.27.1
fsck.fat 3.0.28 (2015-05-16)
0x41: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
1) Remove dirty bit
2) No action
? 2
There are differences between boot sector and its backup.
This is mostly harmless. Differences: (offset:original/backup)
  65:01/00
1) Copy original to backup
2) Copy backup to original
3) No action
? 3
FATs differ but appear to be intact. Use which FAT ?
1) Use first FAT
2) Use second FAT
? q
Invalid input.
? Q
Invalid input.
? ^Z
[1]+  Arrêté                sudo fsck /dev/sdb1
jacquin@jacquin-CX61-2PC:~$ sudo dosfsck -t -a -w /dev/sdb1
fsck.fat 3.0.28 (2015-05-16)
0x41: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
 Automatically removing dirty bit.
FATs differ but appear to be intact. Using first FAT.

J'ai fait un CTRL+Z à la question:
FATs differ but appear to be intact. Use which FAT ?
car je ne savais pas quoi faire
Ensuite au dosfsk je n'ai plus la main

crocodingo31 · Le 13/03/2019, à 19:16

Alors j'ai réessayé:
sudo fsck /dev/sdc1
fsck de util-linux 2.27.1
fsck.fat 3.0.28 (2015-05-16)
0x41: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
1) Remove dirty bit
2) No action
? 2
There are differences between boot sector and its backup.
This is mostly harmless. Differences: (offset:original/backup)
65:01/00
1) Copy original to backup
2) Copy backup to original
3) No action
? 3
J'ai eu les messages suivants sur plusieurs fichiers:
Contains a free cluster (13426304). Assuming EOF.
File size is 33694062 bytes, cluster chain length is 1179648 bytes.
Truncating file to 1179648 bytes.

J'ai appliqué les changements et tout semble revenu à la normale.
Merci !!!

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 09/03/2019, à 11:10

problème écriture / effacement fichiers disque dur externe - résolu

#2 Le 09/03/2019, à 14:40

Re : problème écriture / effacement fichiers disque dur externe - résolu

#3 Le 09/03/2019, à 15:32

Re : problème écriture / effacement fichiers disque dur externe - résolu

#4 Le 09/03/2019, à 15:39

Re : problème écriture / effacement fichiers disque dur externe - résolu

#5 Le 09/03/2019, à 15:54

Re : problème écriture / effacement fichiers disque dur externe - résolu

#6 Le 09/03/2019, à 16:31

Re : problème écriture / effacement fichiers disque dur externe - résolu

#7 Le 09/03/2019, à 16:39

Re : problème écriture / effacement fichiers disque dur externe - résolu

#8 Le 09/03/2019, à 16:41

Re : problème écriture / effacement fichiers disque dur externe - résolu

#9 Le 10/03/2019, à 16:51

Re : problème écriture / effacement fichiers disque dur externe - résolu

#10 Le 10/03/2019, à 21:34

Re : problème écriture / effacement fichiers disque dur externe - résolu

#11 Le 10/03/2019, à 21:50

Re : problème écriture / effacement fichiers disque dur externe - résolu

#12 Le 10/03/2019, à 22:44

Re : problème écriture / effacement fichiers disque dur externe - résolu

#13 Le 11/03/2019, à 20:57

Re : problème écriture / effacement fichiers disque dur externe - résolu

#14 Le 12/03/2019, à 14:38

Re : problème écriture / effacement fichiers disque dur externe - résolu

#15 Le 12/03/2019, à 15:13

Re : problème écriture / effacement fichiers disque dur externe - résolu

#16 Le 12/03/2019, à 18:14

Re : problème écriture / effacement fichiers disque dur externe - résolu

#17 Le 12/03/2019, à 20:39

Re : problème écriture / effacement fichiers disque dur externe - résolu

#18 Le 13/03/2019, à 09:19

Re : problème écriture / effacement fichiers disque dur externe - résolu

#19 Le 13/03/2019, à 10:33

Re : problème écriture / effacement fichiers disque dur externe - résolu

#20 Le 13/03/2019, à 18:27

Re : problème écriture / effacement fichiers disque dur externe - résolu

#21 Le 13/03/2019, à 19:16

Re : problème écriture / effacement fichiers disque dur externe - résolu

Pied de page des forums