Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 10/04/2019, à 10:56

Arthur_B75

Bug à la fin de l'installation Ubuntu

Bonjour à tous

Je viens d'acheter un Lenovo Legion Y530-15ICH sans OS (FreeDOS). Je me suis fait une clef bootable contenant Ubuntu 18.04 LTS grâce à Rufus.

L'installation se déroule bien jusqu'au bout avec le message "Installation terminée". Je clique sur "Redémarrer maintenant" et là mon écran se fige un moment.

Puis au bout d'un certain temps je vois des messages d'erreur apparaitre :

Ecran 1

Avant de s'arrêter totalement sur le message "Synchronizing SCSI cache"

Ecran 2

Lorsque je force le redémarrage, Ubuntu démarre normalement, me demande mon mot de passe, puis s'ouvre sur un écran noir.

J'ai tenté de refaire l'installation plusieurs fois, et le blocage est le même à chaque fois.

Pourriez-vous m'apporter vos lumières svp? smile N'hésitez pas à me poser des questions, j'y répondrai du mieux possible.

Bonne journée !

Dernière modification par Arthur_B75 (Le 10/04/2019, à 12:20)

Hors ligne

#2 Le 10/04/2019, à 11:07

Iamawalrus

Re : Bug à la fin de l'installation Ubuntu

Bonjour,

Est-ce que ton disque dur est bien branché ? C'est bizarre comme question mais j'ai déjà été confronté à ce genre d'erreurs, et c'était dû à ça.

Sinon je ne suis pas du tout sûr que le problème vienne du disque dur mais dans le doute peux-tu nous retourner le résultat des données smart ?

Dans un terminal :

sudo apt-get install --no-install-recommends smartmontools
sudo smartctl -s on -a /dev/sda

PS : peux-tu mettre un lien vers tes photos et les supprimer de ton post ?
Sinon il vaut mieux privilégier des sites qui te proposent de pouvoir poster des miniatures, comme https://pix.toile-libre.org/.

Dernière modification par Iamawalrus (Le 10/04/2019, à 11:17)


"Tout le rêve de la démocratie est d'élever le prolétaire au niveau de bêtise du bourgeois."

Hors ligne

#3 Le 10/04/2019, à 12:35

Arthur_B75

Re : Bug à la fin de l'installation Ubuntu

Merci pour ta réponse.

Je pense que le disque dur est bien branché car l'installation va jusqu'au bout.

Voici ce que me dit le terminal:

sudo apt-get install --no-install-recommends smartmontools

Lecture des listes de paquets… Fait
Construction de l'arbre de dépendances
Lecture des informations d'état… Fait
E: Impossible de trouver le paquet smartmontools

sudo smartctl -s on -a /dev/sda

sudo: smartctl : commande introuvable

Dernière modification par Arthur_B75 (Le 10/04/2019, à 12:36)

Hors ligne

#4 Le 10/04/2019, à 12:43

Iamawalrus

Re : Bug à la fin de l'installation Ubuntu

Merci pour les photos.

Peux tu essayer d'installer avec

sudo apt update
sudo apt install smartmontools

Puis lancer la commande smartctl au dessus si ok.

Sinon si toujours rien, le retour de :

cat /etc/apt/sources.list

"Tout le rêve de la démocratie est d'élever le prolétaire au niveau de bêtise du bourgeois."

Hors ligne

#5 Le 10/04/2019, à 13:04

Arthur_B75

Re : Bug à la fin de l'installation Ubuntu

Voici le message d'erreur suite à la première commande

Ecran commande

Pour la 2e commande, il ne trouve toujours pas le paquet smartmontools

Hors ligne

#6 Le 10/04/2019, à 13:07

Iamawalrus

Re : Bug à la fin de l'installation Ubuntu

T'es connecté à internet ?


"Tout le rêve de la démocratie est d'élever le prolétaire au niveau de bêtise du bourgeois."

Hors ligne

#7 Le 10/04/2019, à 13:19

Arthur_B75

Re : Bug à la fin de l'installation Ubuntu

Non je ne suis pas connecté à internet. Cela est possible même si je n'ai pas encore réussi à démarrer?

Je peux éventuellement redémarrer en mode "tester Ubuntu" sur l'USB, me connecter à internet, puis tenter d'installer si cela est nécessaire. Si tu penses que c'est nécessaire, je le ferai de chez moi ce soir smile

Hors ligne

#8 Le 10/04/2019, à 13:36

malbo

Re : Bug à la fin de l'installation Ubuntu

Bonjour,
Par rapport à ce souci de connexion à internet, je viens de constater qu'il existe une ligne pour le modèle Legion Y530-15ICH-454 dans la Liste des portables « Lenovo ». Dans cette ligne, on peut lire : "en 18.04 le wifi n'était pas reconnu". Cette information n'est pas garantie (la personne qui a créé cette ligne n'a pas pensé à donner son pseudo donc on ne peut pas investiguer) mais il faut la garder en tête parce que si elle se confirme, ça voudrait le coup d'installer finalement la version 19.04 plutôt que la version 18.04 de Ubuntu.
Cela étant posé, je te conseille (ce soir chez toi) de te connecter à internet en mode "tester Ubuntu" avec la LiveUSB de Ubuntu 18.04. Si ça ne veut pas en WiFi, connecte-toi en filaire (par Ethernet). Cela permettra de faire l'installation de smartmontools en réponse à la demande de Iamawalrus, puis de faire le contrôle du disque dur comme expliqué dans son post #2. EDIT : cependant, l'hypothèse d'un disque défaillant sur un ordi récemment sorti sur le marché (voir cette page) et qui vient tout juste d'être acheté me semble improbable.

Dernière modification par malbo (Le 10/04/2019, à 13:49)

Hors ligne

#9 Le 10/04/2019, à 16:00

ikewdu

Re : Bug à la fin de l'installation Ubuntu

Hors ligne

#10 Le 11/04/2019, à 06:37

Iamawalrus

Re : Bug à la fin de l'installation Ubuntu

malbo a écrit :

cette page) et qui vient tout juste d'être acheté me semble improbable.

C'est vrai, d'où ma demande de savoir si le DD était bien branché (erreur déjà rencontré de mon côté). Mais pour les données Smart une petite vérification d'usage.

Je peux éventuellement redémarrer en mode "tester Ubuntu" sur l'USB, me connecter à internet, puis tenter d'installer si cela est nécessaire. Si tu penses que c'est nécessaire, je le ferai de chez moi ce soir

Si l'ordinateur est neuf, c'est pas primordial.

Par contre en te connectant en Live USB tu pourrais tester ton support (option sur la clé "vérifier l'intégrité du disque) et faire un Memtest par la même occasion.


"Tout le rêve de la démocratie est d'élever le prolétaire au niveau de bêtise du bourgeois."

Hors ligne

#11 Le 11/04/2019, à 08:45

Arthur_B75

Re : Bug à la fin de l'installation Ubuntu

Bonjour à tous et à toutes.

Après vérification des espaces de stockage, le DD est bien détecté.

Hier, j'ai réessayé avec/sans internet sur les version 18.04 et 19.04 mais toujours le même problème. Dernier essai, en mode test j'ai lancé l'installation. Au lieu de redémarrer directement j'ai choisi "continuer le test" et essayé d'éteindre moi-même ==> L'écran freeze

Iamawalrus a écrit :

Par contre en te connectant en Live USB tu pourrais tester ton support (option sur la clé "vérifier l'intégrité du disque) et faire un Memtest par la même occasion.

Tu parles de ça : https://guide.ubuntu-fr.org/desktop/disk-check.html ?

Hors ligne

#12 Le 11/04/2019, à 09:01

Iamawalrus

Re : Bug à la fin de l'installation Ubuntu

Non, c'est le menu sur lequel tu tombes quand tu branches ta clé :

1554970127.jpg


"Tout le rêve de la démocratie est d'élever le prolétaire au niveau de bêtise du bourgeois."

Hors ligne

#13 Le 13/04/2019, à 14:45

Arthur_B75

Re : Bug à la fin de l'installation Ubuntu

"No error found"

Du coup je suis complètement perdu. Je ne sais pas ce que ça peut être

Hors ligne

#14 Le 13/04/2019, à 16:14

Arthur_B75

Re : Bug à la fin de l'installation Ubuntu

Eureka ! J'ai trouvé mon erreur big_smile

Lors de l'installation, le disque sur sélectionné par défaut était /dev/nvme0n1. Je ne sais pas à quoi cela correspond, mais j'ai changé pour SCSI5 à 1 To (qui correspond mieux à mon DD)

Capture

Du coup, avant de clôturer le sujet :
Petite question 1 : Savez-vous pourquoi il considère qu'il y a 2 partitions? (ou 2 disques)
Petite question 2 : Au démarrage, j'ai un écran me proposant de démarrer sur différents disques (Capture 2). Comment puis-je faire pour ne garder qu'une seule option Ubuntu?

En tout cas, merci beaucoup à celles et ceux qui ont pris le temps de me répondre.
Bonne journée et bon week-end à vous !

Hors ligne

#15 Le 13/04/2019, à 17:30

lucmars

Re : Bug à la fin de l'installation Ubuntu

T'as 2 disques :
- un statique nvme sur lequel t'as installé la 1904
- un mécanique sur lequel t'as installé la 1804 (?)

Boot sur l'entrée ubuntu et fais un rapport boot-info, qu'on y voit clair. De là, y a p'ete idée d'élaguer le menu grub, ce que tu vois en question 2.

Dernière modification par lucmars (Le 13/04/2019, à 17:32)


Gaulois Matter !

Hors ligne

#16 Le 13/04/2019, à 18:50

Arthur_B75

Re : Bug à la fin de l'installation Ubuntu

Voici mon boot-info : http://paste.ubuntu.com/p/dRZVFyjbJw/

J'ai essayé à plusieur reprises d'installer Ubuntu, mais je l'ai fait sur le mauvais disque (le mécanique j'imagine). Voyant que ça ne fonctionnait pas donc j'ai tenté avec une nouvelle version (la beta 19.04).

Merci pour ton aide!

Hors ligne

#17 Le 13/04/2019, à 19:15

lucmars

Re : Bug à la fin de l'installation Ubuntu

Le boot-info

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       LVM2_member
    Boot sector type:  -
    Boot sector info: 

ubuntu-vg-root: ________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu Disco Dingo (development branch)
    Boot files:        /boot/grub/grub.cfg /etc/fstab

ubuntu-vg-swap_1: ______________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: ST1000LM035-1RK1
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624 1,953,523,711 1,952,473,088 Logical Volume Manager (LVM) partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/loop8                                              squashfs   
/dev/mapper/ubuntu--vg-root 7c33c285-cee4-49b6-bb18-620d5e9d3907   ext4       
/dev/mapper/ubuntu--vg-swap_1 0231f64e-9188-4b79-ab78-1761fccded1c   swap       
/dev/nvme0n1                                                       
/dev/nvme0n1p1   31A9-09C4                              vfat       
/dev/nvme0n1p2   20516296-1e13-40db-9ad5-23a9c3f26962   ext4       
/dev/sda1        F247-9DA9                              vfat       
/dev/sda2        0wyl3t-Gb0U-p3Ca-kcRL-Ekie-KrQB-23Xdys LVM2_member 

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Apr 13 19:45 ata-ST1000LM035-1RK172_WL1FTS12 -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 13 19:45 ata-ST1000LM035-1RK172_WL1FTS12-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 13 19:45 ata-ST1000LM035-1RK172_WL1FTS12-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 13 19:45 dm-name-ubuntu--vg-root -> ../../dm-0
lrwxrwxrwx 1 root root 10 Apr 13 19:45 dm-name-ubuntu--vg-swap_1 -> ../../dm-1
lrwxrwxrwx 1 root root 10 Apr 13 19:45 dm-uuid-LVM-GylYXZi7tiTdGCXwfv3Aav44WX2XU5WhRaYGem0IScTYCo9FN6KCR6MrcdevLQuc -> ../../dm-0
lrwxrwxrwx 1 root root 10 Apr 13 19:45 dm-uuid-LVM-GylYXZi7tiTdGCXwfv3Aav44WX2XU5WhzdUYv7hhOzOZGCugvOzKIemRCF7UdJIX -> ../../dm-1
lrwxrwxrwx 1 root root 10 Apr 13 19:45 lvm-pv-uuid-0wyl3t-Gb0U-p3Ca-kcRL-Ekie-KrQB-23Xdys -> ../../sda2
lrwxrwxrwx 1 root root 13 Apr 13 19:45 nvme-RPFTJ128PDD2EWX_SS0R27340Z1CD8B715WW -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 Apr 13 19:45 nvme-RPFTJ128PDD2EWX_SS0R27340Z1CD8B715WW-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 Apr 13 19:45 nvme-RPFTJ128PDD2EWX_SS0R27340Z1CD8B715WW-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 13 Apr 13 19:45 nvme-nvme.1cc4-5353305232373334305a31434438423731355757-525046544a31323850444432455758-00000001 -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 Apr 13 19:45 nvme-nvme.1cc4-5353305232373334305a31434438423731355757-525046544a31323850444432455758-00000001-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 Apr 13 19:45 nvme-nvme.1cc4-5353305232373334305a31434438423731355757-525046544a31323850444432455758-00000001-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root  9 Apr 13 19:45 wwn-0x5000c500be1ca5e2 -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 13 19:45 wwn-0x5000c500be1ca5e2-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 13 19:45 wwn-0x5000c500be1ca5e2-part2 -> ../../sda2

========================= "ls -R /dev/mapper/" output: =========================

/dev/mapper:
control
ubuntu--vg-root
ubuntu--vg-swap_1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/fuse        /home/arthur/.cache/doc  fuse       (rw,nosuid,nodev,relatime,user_id=0,group_id=0)
/dev/mapper/ubuntu--vg-root /                        ext4       (rw,relatime,errors=remount-ro)
/dev/nvme0n1p1   /boot/efi                vfat       (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


====================== ubuntu-vg-root/boot/grub/grub.cfg: ======================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${initrdfail}" = 2 ]; then
   set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
   set next_entry="${prev_entry}"
   set prev_entry=
   save_env prev_entry
   if [ "${next_entry}" ]; then
      set initrdfail=2
   fi
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function initrdfail {
    if [ -n "${have_grubenv}" ]; then if [ -n "${partuuid}" ]; then
      if [ -z "${initrdfail}" ]; then
        set initrdfail=1
        if [ -n "${boot_once}" ]; then
          set prev_entry="${default}"
          save_env prev_entry
        fi
      fi
      save_env initrdfail
    fi; fi
}
function recordfail {
  set recordfail=1
  # GRUB lacks write support for lvm, so recordfail support is disabled.
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod lvm
insmod ext2
set root='lvmid/GylYXZ-i7ti-TdGC-Xwfv-3Aav-44WX-2XU5Wh/RaYGem-0ISc-TYCo-9FN6-KCR6-Mrcd-evLQuc'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint='lvmid/GylYXZ-i7ti-TdGC-Xwfv-3Aav-44WX-2XU5Wh/RaYGem-0ISc-TYCo-9FN6-KCR6-Mrcd-evLQuc'  7c33c285-cee4-49b6-bb18-620d5e9d3907
else
  search --no-floppy --fs-uuid --set=root 7c33c285-cee4-49b6-bb18-620d5e9d3907
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
if [ $grub_platform = efi ]; then
  set timeout=30
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7c33c285-cee4-49b6-bb18-620d5e9d3907' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod lvm
	insmod ext2
	set root='lvmid/GylYXZ-i7ti-TdGC-Xwfv-3Aav-44WX-2XU5Wh/RaYGem-0ISc-TYCo-9FN6-KCR6-Mrcd-evLQuc'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint='lvmid/GylYXZ-i7ti-TdGC-Xwfv-3Aav-44WX-2XU5Wh/RaYGem-0ISc-TYCo-9FN6-KCR6-Mrcd-evLQuc'  7c33c285-cee4-49b6-bb18-620d5e9d3907
	else
	  search --no-floppy --fs-uuid --set=root 7c33c285-cee4-49b6-bb18-620d5e9d3907
	fi
	linux	/boot/vmlinuz-5.0.0-11-generic root=/dev/mapper/ubuntu--vg-root ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-5.0.0-11-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-7c33c285-cee4-49b6-bb18-620d5e9d3907' {
	menuentry 'Ubuntu, avec Linux 5.0.0-11-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-11-generic-advanced-7c33c285-cee4-49b6-bb18-620d5e9d3907' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod lvm
		insmod ext2
		set root='lvmid/GylYXZ-i7ti-TdGC-Xwfv-3Aav-44WX-2XU5Wh/RaYGem-0ISc-TYCo-9FN6-KCR6-Mrcd-evLQuc'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint='lvmid/GylYXZ-i7ti-TdGC-Xwfv-3Aav-44WX-2XU5Wh/RaYGem-0ISc-TYCo-9FN6-KCR6-Mrcd-evLQuc'  7c33c285-cee4-49b6-bb18-620d5e9d3907
		else
		  search --no-floppy --fs-uuid --set=root 7c33c285-cee4-49b6-bb18-620d5e9d3907
		fi
		echo	'Chargement de Linux 5.0.0-11-generic…'
		linux	/boot/vmlinuz-5.0.0-11-generic root=/dev/mapper/ubuntu--vg-root ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.0.0-11-generic
	}
	menuentry 'Ubuntu, with Linux 5.0.0-11-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-11-generic-recovery-7c33c285-cee4-49b6-bb18-620d5e9d3907' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod lvm
		insmod ext2
		set root='lvmid/GylYXZ-i7ti-TdGC-Xwfv-3Aav-44WX-2XU5Wh/RaYGem-0ISc-TYCo-9FN6-KCR6-Mrcd-evLQuc'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint='lvmid/GylYXZ-i7ti-TdGC-Xwfv-3Aav-44WX-2XU5Wh/RaYGem-0ISc-TYCo-9FN6-KCR6-Mrcd-evLQuc'  7c33c285-cee4-49b6-bb18-620d5e9d3907
		else
		  search --no-floppy --fs-uuid --set=root 7c33c285-cee4-49b6-bb18-620d5e9d3907
		fi
		echo	'Chargement de Linux 5.0.0-11-generic…'
		linux	/boot/vmlinuz-5.0.0-11-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.0.0-11-generic
	}
	menuentry 'Ubuntu, avec Linux 5.0.0-7-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-7-generic-advanced-7c33c285-cee4-49b6-bb18-620d5e9d3907' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod lvm
		insmod ext2
		set root='lvmid/GylYXZ-i7ti-TdGC-Xwfv-3Aav-44WX-2XU5Wh/RaYGem-0ISc-TYCo-9FN6-KCR6-Mrcd-evLQuc'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint='lvmid/GylYXZ-i7ti-TdGC-Xwfv-3Aav-44WX-2XU5Wh/RaYGem-0ISc-TYCo-9FN6-KCR6-Mrcd-evLQuc'  7c33c285-cee4-49b6-bb18-620d5e9d3907
		else
		  search --no-floppy --fs-uuid --set=root 7c33c285-cee4-49b6-bb18-620d5e9d3907
		fi
		echo	'Chargement de Linux 5.0.0-7-generic…'
		linux	/boot/vmlinuz-5.0.0-7-generic root=/dev/mapper/ubuntu--vg-root ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.0.0-7-generic
	}
	menuentry 'Ubuntu, with Linux 5.0.0-7-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-7-generic-recovery-7c33c285-cee4-49b6-bb18-620d5e9d3907' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod lvm
		insmod ext2
		set root='lvmid/GylYXZ-i7ti-TdGC-Xwfv-3Aav-44WX-2XU5Wh/RaYGem-0ISc-TYCo-9FN6-KCR6-Mrcd-evLQuc'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint='lvmid/GylYXZ-i7ti-TdGC-Xwfv-3Aav-44WX-2XU5Wh/RaYGem-0ISc-TYCo-9FN6-KCR6-Mrcd-evLQuc'  7c33c285-cee4-49b6-bb18-620d5e9d3907
		else
		  search --no-floppy --fs-uuid --set=root 7c33c285-cee4-49b6-bb18-620d5e9d3907
		fi
		echo	'Chargement de Linux 5.0.0-7-generic…'
		linux	/boot/vmlinuz-5.0.0-7-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.0.0-7-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu Disco Dingo (development branch) (19.04) (sur /dev/nvme0n1p2)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-20516296-1e13-40db-9ad5-23a9c3f26962' {
	insmod part_gpt
	insmod ext2
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root  20516296-1e13-40db-9ad5-23a9c3f26962
	else
	  search --no-floppy --fs-uuid --set=root 20516296-1e13-40db-9ad5-23a9c3f26962
	fi
	linux /boot/vmlinuz-5.0.0-8-generic root=UUID=20516296-1e13-40db-9ad5-23a9c3f26962 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-5.0.0-8-generic
}
submenu 'Options avancées pour Ubuntu Disco Dingo (development branch) (19.04) (sur /dev/nvme0n1p2)' $menuentry_id_option 'osprober-gnulinux-advanced-20516296-1e13-40db-9ad5-23a9c3f26962' {
	menuentry 'Ubuntu (sur /dev/nvme0n1p2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-5.0.0-8-generic--20516296-1e13-40db-9ad5-23a9c3f26962' {
		insmod part_gpt
		insmod ext2
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root  20516296-1e13-40db-9ad5-23a9c3f26962
		else
		  search --no-floppy --fs-uuid --set=root 20516296-1e13-40db-9ad5-23a9c3f26962
		fi
		linux /boot/vmlinuz-5.0.0-8-generic root=UUID=20516296-1e13-40db-9ad5-23a9c3f26962 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-5.0.0-8-generic
	}
	menuentry 'Ubuntu, avec Linux 5.0.0-8-generic (sur /dev/nvme0n1p2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-5.0.0-8-generic--20516296-1e13-40db-9ad5-23a9c3f26962' {
		insmod part_gpt
		insmod ext2
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root  20516296-1e13-40db-9ad5-23a9c3f26962
		else
		  search --no-floppy --fs-uuid --set=root 20516296-1e13-40db-9ad5-23a9c3f26962
		fi
		linux /boot/vmlinuz-5.0.0-8-generic root=UUID=20516296-1e13-40db-9ad5-23a9c3f26962 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-5.0.0-8-generic
	}
	menuentry 'Ubuntu, with Linux 5.0.0-8-generic (recovery mode) (sur /dev/nvme0n1p2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-5.0.0-8-generic-root=UUID=20516296-1e13-40db-9ad5-23a9c3f26962 ro recovery nomodeset-20516296-1e13-40db-9ad5-23a9c3f26962' {
		insmod part_gpt
		insmod ext2
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root  20516296-1e13-40db-9ad5-23a9c3f26962
		else
		  search --no-floppy --fs-uuid --set=root 20516296-1e13-40db-9ad5-23a9c3f26962
		fi
		linux /boot/vmlinuz-5.0.0-8-generic root=UUID=20516296-1e13-40db-9ad5-23a9c3f26962 ro recovery nomodeset
		initrd /boot/initrd.img-5.0.0-8-generic
	}
	menuentry 'Ubuntu, avec Linux 5.0.0-7-generic (sur /dev/nvme0n1p2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-5.0.0-7-generic--20516296-1e13-40db-9ad5-23a9c3f26962' {
		insmod part_gpt
		insmod ext2
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root  20516296-1e13-40db-9ad5-23a9c3f26962
		else
		  search --no-floppy --fs-uuid --set=root 20516296-1e13-40db-9ad5-23a9c3f26962
		fi
		linux /boot/vmlinuz-5.0.0-7-generic root=UUID=20516296-1e13-40db-9ad5-23a9c3f26962 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-5.0.0-7-generic
	}
	menuentry 'Ubuntu, with Linux 5.0.0-7-generic (recovery mode) (sur /dev/nvme0n1p2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-5.0.0-7-generic-root=UUID=20516296-1e13-40db-9ad5-23a9c3f26962 ro recovery nomodeset-20516296-1e13-40db-9ad5-23a9c3f26962' {
		insmod part_gpt
		insmod ext2
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root  20516296-1e13-40db-9ad5-23a9c3f26962
		else
		  search --no-floppy --fs-uuid --set=root 20516296-1e13-40db-9ad5-23a9c3f26962
		fi
		linux /boot/vmlinuz-5.0.0-7-generic root=UUID=20516296-1e13-40db-9ad5-23a9c3f26962 ro recovery nomodeset
		initrd /boot/initrd.img-5.0.0-7-generic
	}
}

set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

========================== ubuntu-vg-root/etc/fstab: ===========================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
/dev/mapper/ubuntu--vg-root /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/nvme0n1p1 during installation
UUID=31A9-09C4  /boot/efi       vfat    umask=0077      0       1
/dev/mapper/ubuntu--vg-swap_1 none            swap    sw              0       0
--------------------------------------------------------------------------------

============== ubuntu-vg-root: Location of files loaded by Grub: ===============

           GiB - GB             File                                 Fragment(s)

 644.133205414 = 691.632762880  boot/grub/grub.cfg                             1
   2.429977417 = 2.609168384    boot/vmlinuz-5.0.0-11-generic                  1
   1.453121185 = 1.560276992    boot/vmlinuz-5.0.0-7-generic                   2
   1.453121185 = 1.560276992    vmlinuz                                        2
   3.503425598 = 3.761774592    boot/initrd.img-5.0.0-11-generic               2
   2.779697418 = 2.984677376    boot/initrd.img-5.0.0-7-generic                3
   2.779697418 = 2.984677376    initrd.img                                     3
   2.779697418 = 2.984677376    initrd.img.old                                 3

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/24097/mountinfo) leaked on lvs invocation. Parent PID 1141: bash
File descriptor 14 (socket:[104781]) leaked on lvs invocation. Parent PID 1141: bash
File descriptor 15 (socket:[104782]) leaked on lvs invocation. Parent PID 1141: bash
File descriptor 9 (/proc/24097/mountinfo) leaked on lvchange invocation. Parent PID 1555: bash
File descriptor 14 (socket:[104781]) leaked on lvchange invocation. Parent PID 1555: bash
File descriptor 15 (socket:[104782]) leaked on lvchange invocation. Parent PID 1555: bash
File descriptor 9 (/proc/24097/mountinfo) leaked on lvchange invocation. Parent PID 1555: bash
File descriptor 14 (socket:[104781]) leaked on lvchange invocation. Parent PID 1555: bash
File descriptor 15 (socket:[104782]) leaked on lvchange invocation. Parent PID 1555: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20190413_1945 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
BLKID BEFORE LVM ACTIVATION:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/nvme0n1p1: UUID="31A9-09C4" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="d7538e1e-4b77-457f-b923-436b961c6867"
/dev/nvme0n1p2: UUID="20516296-1e13-40db-9ad5-23a9c3f26962" TYPE="ext4" PARTUUID="aa0af342-fec1-4313-b6c9-2581a9841692"
/dev/sda1: UUID="F247-9DA9" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="47aec1ee-6c6e-422a-926d-c93f81d075d2"
/dev/sda2: UUID="0wyl3t-Gb0U-p3Ca-kcRL-Ekie-KrQB-23Xdys" TYPE="LVM2_member" PARTUUID="9a1d6935-d820-4de5-a4b2-24312d3bf3d6"
/dev/mapper/ubuntu--vg-root: UUID="7c33c285-cee4-49b6-bb18-620d5e9d3907" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="0231f64e-9188-4b79-ab78-1761fccded1c" TYPE="swap"
/dev/loop8: TYPE="squashfs"
/dev/nvme0n1: PTUUID="c6f82cd0-b1f4-474a-aba1-87b202ce3c43" PTTYPE="gpt"
MODPROBE
VGSCAN
File descriptor 9 (/proc/24097/mountinfo) leaked on vgscan invocation. Parent PID 24106: /bin/bash
File descriptor 14 (socket:[104781]) leaked on vgscan invocation. Parent PID 24106: /bin/bash
File descriptor 15 (socket:[104782]) leaked on vgscan invocation. Parent PID 24106: /bin/bash
Reading volume groups from cache.
Found volume group "ubuntu-vg" using metadata type lvm2
VGCHANGE
File descriptor 9 (/proc/24097/mountinfo) leaked on vgchange invocation. Parent PID 24106: /bin/bash
File descriptor 14 (socket:[104781]) leaked on vgchange invocation. Parent PID 24106: /bin/bash
File descriptor 15 (socket:[104782]) leaked on vgchange invocation. Parent PID 24106: /bin/bash
2 logical volume(s) in volume group "ubuntu-vg" now active
File descriptor 9 (/proc/24097/mountinfo) leaked on lvscan invocation. Parent PID 24106: /bin/bash
File descriptor 14 (socket:[104781]) leaked on lvscan invocation. Parent PID 24106: /bin/bash
File descriptor 15 (socket:[104782]) leaked on lvscan invocation. Parent PID 24106: /bin/bash
LVSCAN:
ACTIVE            '/dev/ubuntu-vg/root' [930.05 GiB] inherit
ACTIVE            '/dev/ubuntu-vg/swap_1' [976.00 MiB] inherit
Y a-t-il un RAID sur cet ordinateur ? no
File descriptor 9 (/proc/24097/mountinfo) leaked on lvs invocation. Parent PID 25495: /bin/sh
File descriptor 14 (socket:[104781]) leaked on lvs invocation. Parent PID 25495: /bin/sh
File descriptor 15 (socket:[104782]) leaked on lvs invocation. Parent PID 25495: /bin/sh
boot-info is executed in installed-session (Ubuntu Disco Dingo (development branch), disco, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
Address sizes:       39 bits physical, 48 bits virtual
BOOT_IMAGE=/boot/vmlinuz-5.0.0-11-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
Set sda as corresponding disk of mapper/ubuntu--vg-root
Set sda as corresponding disk of mapper/ubuntu--vg-root

=================== os-prober:
/dev/mapper/ubuntu--vg-root:L'OS actuellement utilisé - Ubuntu Disco Dingo (development branch) CurrentSession:linux
/dev/nvme0n1p2:Ubuntu Disco Dingo (development branch) (19.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/nvme0n1p1: UUID="31A9-09C4" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="d7538e1e-4b77-457f-b923-436b961c6867"
/dev/nvme0n1p2: UUID="20516296-1e13-40db-9ad5-23a9c3f26962" TYPE="ext4" PARTUUID="aa0af342-fec1-4313-b6c9-2581a9841692"
/dev/sda1: UUID="F247-9DA9" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="47aec1ee-6c6e-422a-926d-c93f81d075d2"
/dev/sda2: UUID="0wyl3t-Gb0U-p3Ca-kcRL-Ekie-KrQB-23Xdys" TYPE="LVM2_member" PARTUUID="9a1d6935-d820-4de5-a4b2-24312d3bf3d6"
/dev/mapper/ubuntu--vg-root: UUID="7c33c285-cee4-49b6-bb18-620d5e9d3907" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="0231f64e-9188-4b79-ab78-1761fccded1c" TYPE="swap"
/dev/loop8: TYPE="squashfs"
/dev/nvme0n1: PTUUID="c6f82cd0-b1f4-474a-aba1-87b202ce3c43" PTTYPE="gpt"

Set sda as corresponding disk of mapper/ubuntu--vg-root

2 disks with OS, 2 OS : 2 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 mars  26 23:30 grub.d
total 80
-rwxr-xr-x 1 root root 10627 mars  11 22:48 00_header
-rwxr-xr-x 1 root root  6258 mars  11 19:29 05_debian_theme
-rwxr-xr-x 1 root root 13718 mars  11 22:48 10_linux
-rwxr-xr-x 1 root root 11497 mars  11 22:48 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars  11 22:48 30_os-prober
-rwxr-xr-x 1 root root  1418 mars  11 22:48 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mars  11 22:48 40_custom
-rwxr-xr-x 1 root root   216 mars  11 22:48 41_custom
-rw-r--r-- 1 root root   483 mars  11 22:48 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of mapper/ubuntu--vg-root: UUID=31A9-09C4   (nvme0n1p1)
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/mmx64.efi

=================== nvme0n1p2/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 mars  26 23:30 grub.d
total 80
-rwxr-xr-x 1 root root 10627 mars  11 22:48 00_header
-rwxr-xr-x 1 root root  6258 mars  11 19:29 05_debian_theme
-rwxr-xr-x 1 root root 13718 mars  11 22:48 10_linux
-rwxr-xr-x 1 root root 11497 mars  11 22:48 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars  11 22:48 30_os-prober
-rwxr-xr-x 1 root root  1418 mars  11 22:48 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mars  11 22:48 40_custom
-rwxr-xr-x 1 root root   216 mars  11 22:48 41_custom
-rw-r--r-- 1 root root   483 mars  11 22:48 README




=================== nvme0n1p2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of nvme0n1p2: UUID=31A9-09C4   (nvme0n1p1)
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : substitution de commande: octet nul ignoré en entrée

=================== efibootmgr -v
BootCurrent: 0003
Timeout: 0 seconds
BootOrder: 0001,0000,0002,0003,2001,2002,2003
Boot0000* ST1000LM035-1RK172              	BBS(HD,ST1000LM035-1RK172              ,0x500)................-...........A......B................................{..
Boot0001* RPFTJ128PDD2EWX                 	BBS(HD,RPFTJ128PDD2EWX                 ,0x500)................+ .0....# .0? .0....................................{..
Boot0002* Realtek PXE B08 D00	BBS(128,Realtek PXE B08 D00,0x0).......................................................................
Boot0003* ubuntu	HD(1,GPT,d7538e1e-4b77-457f-b923-436b961c6867,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
Boot0004* EFI PXE 0 for IPv4 (E8-6A-64-6F-42-A6) 	PciRoot(0x0)/Pci(0x1d,0x5)/Pci(0x0,0x0)/MAC(e86a646f42a6,0)/IPv4(0.0.0.00.0.0.0,0,0)RC
Boot0005* EFI PXE 0 for IPv6 (E8-6A-64-6F-42-A6) 	PciRoot(0x0)/Pci(0x1d,0x5)/Pci(0x0,0x0)/MAC(e86a646f42a6,0)/IPv6([::]:<->[::]:,0,0)RC
Boot0006* EFI PXE 0 for IPv4 (E8-6A-64-6F-42-A6) 	PciRoot(0x0)/Pci(0x1d,0x5)/Pci(0x0,0x0)/MAC(e86a646f42a6,0)/IPv4(0.0.0.00.0.0.0,0,0)RC
Boot0007* EFI PXE 0 for IPv6 (E8-6A-64-6F-42-A6) 	PciRoot(0x0)/Pci(0x1d,0x5)/Pci(0x0,0x0)/MAC(e86a646f42a6,0)/IPv6([::]:<->[::]:,0,0)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
mapper/ubuntu--vg-root	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-pc grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	notbiosboot, .
nvme0n1p1	: nvme0n1,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /boot/efi.
nvme0n1p2	: nvme0n1,	not-sepboot,	grubenv-ok	grub2,	signed grub-pc grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/nvme0n1p2.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sda1.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
nvme0n1	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA ST1000LM035-1RK1:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:1000GB:1000GB:::lvm;

BYT;
/dev/mapper/ubuntu--vg-swap_1:1023MB:dm:512:4096:loop:Linux device-mapper (linear):;
1:0.00B:1023MB:1023MB:linux-swap(v1)::;

BYT;
/dev/mapper/ubuntu--vg-root:999GB:dm:512:4096:loop:Linux device-mapper (linear):;
1:0.00B:999GB:999GB:ext4::;

BYT;
/dev/nvme0n1:128GB:nvme:512:512:gpt:RPFTJ128PDD2EWX:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:128GB:127GB:ext4::;

=================== lsblk:
KNAME     TYPE FSTYPE        SIZE LABEL
loop0     loop squashfs    143,5M
loop1     loop squashfs     53,7M
loop2     loop squashfs     14,8M
loop3     loop squashfs     1008K
loop4     loop squashfs     91,1M
loop5     loop squashfs        4M
loop6     loop squashfs     35,3M
loop7     loop squashfs      3,7M
loop8     loop squashfs     53,7M
sda       disk             931,5G
sda1      part vfat          512M
sda2      part LVM2_member   931G
dm-0      lvm  ext4        930,1G
dm-1      lvm  swap          976M
nvme0n1   disk             119,2G
nvme0n1p1 part vfat          512M
nvme0n1p2 part ext4        118,8G

KNAME     ROTA RO RM STATE   MOUNTPOINT
loop0        1  1  0         /snap/gnome-3-28-1804/23
loop1        1  1  0         /snap/core18/782
loop2        1  1  0         /snap/gnome-characters/206
loop3        1  1  0         /snap/gnome-logs/57
loop4        1  1  0         /snap/core/6531
loop5        1  1  0         /snap/gnome-calculator/352
loop6        1  1  0         /snap/gtk-common-themes/1198
loop7        1  1  0         /snap/gnome-system-monitor/70
loop8        1  1  0         /snap/core18/941
sda          1  0  0 running
sda1         1  0  0         /mnt/boot-sav/sda1
sda2         1  0  0
dm-0         1  0  0 running /
dm-1         1  0  0 running [SWAP]
nvme0n1      0  0  0 live
nvme0n1p1    0  0  0         /boot/efi
nvme0n1p2    0  0  0         /mnt/boot-sav/nvme0n1p2


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=3992900k,nr_inodes=998225,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=803628k,mode=755)
/dev/mapper/ubuntu--vg-root on / type ext4 (rw,relatime,errors=remount-ro)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup2 on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=27,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=12042)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/var/lib/snapd/snaps/gnome-characters_206.snap on /snap/gnome-characters/206 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_782.snap on /snap/core18/782 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_23.snap on /snap/gnome-3-28-1804/23 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_57.snap on /snap/gnome-logs/57 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_352.snap on /snap/gnome-calculator/352 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_1198.snap on /snap/gtk-common-themes/1198 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_6531.snap on /snap/core/6531 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_70.snap on /snap/gnome-system-monitor/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/nvme0n1p1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=803624k,mode=700,uid=1000,gid=1000)
/var/lib/snapd/snaps/core18_941.snap on /snap/core18/941 type squashfs (ro,nodev,relatime,x-gdu.hide)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
gvfsd-fuse on /home/arthur/.cache/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0)
/dev/fuse on /home/arthur/.cache/doc type fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0)
/dev/nvme0n1p2 on /mnt/boot-sav/nvme0n1p2 type ext4 (rw,relatime)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=================== ls:
/sys/block/dm-0 (filtered):  alignment_offset bdi capability dev discard_alignment dm ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/dm-1 (filtered):  alignment_offset bdi capability dev discard_alignment dm ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/nvme0n1 (filtered):  alignment_offset bdi capability dev device discard_alignment ext_range hidden holders inflight integrity lightnvm mq nsid nvme0n1p1 nvme0n1p2 power queue range removable ro size slaves stat subsystem trace uevent wwid
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/dev (filtered):  acpi_thermal_rel autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dm-0 dm-1 dri drm_dp_aux0 ecryptfs fb0 fd full fuse gpiochip0 hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 initctl input kmsg lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null nvme0 nvme0n1 nvme0n1p1 nvme0n1p2 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sg0 shm snapshot snd stderr stdin stdout tpm0 tpmrm0 ubuntu-vg udmabuf uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 video1 zero
ls /dev/mapper:  control ubuntu--vg-root ubuntu--vg-swap_1

=================== hexdump -n512 -C /dev/nvme0n1p1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  20 00 40 00 00 08 00 00  |........ .@.....|
00000020  00 00 10 00 00 04 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 c4 09 a9 31 4e  4f 20 4e 41 4d 45 20 20  |..)...1NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 00 04 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 a9 9d 47 f2 4e  4f 20 4e 41 4d 45 20 20  |..)..G.NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem                  Type      Size  Used Avail Use% Mounted on
udev                        devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs                       tmpfs     785M  1.9M  783M   1% /run
/dev/mapper/ubuntu--vg-root ext4      915G  6.1G  862G   1% /
tmpfs                       tmpfs     3.9G   76M  3.8G   2% /dev/shm
tmpfs                       tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs                       tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/loop2                  squashfs   15M   15M     0 100% /snap/gnome-characters/206
/dev/loop1                  squashfs   54M   54M     0 100% /snap/core18/782
/dev/loop0                  squashfs  144M  144M     0 100% /snap/gnome-3-28-1804/23
/dev/loop3                  squashfs  1.0M  1.0M     0 100% /snap/gnome-logs/57
/dev/loop5                  squashfs  4.2M  4.2M     0 100% /snap/gnome-calculator/352
/dev/loop6                  squashfs   36M   36M     0 100% /snap/gtk-common-themes/1198
/dev/loop4                  squashfs   92M   92M     0 100% /snap/core/6531
/dev/loop7                  squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/70
/dev/nvme0n1p1              vfat      511M  7.7M  504M   2% /boot/efi
tmpfs                       tmpfs     785M   36K  785M   1% /run/user/1000
/dev/loop8                  squashfs   54M   54M     0 100% /snap/core18/941
/dev/nvme0n1p2              ext4      117G  7.4G  104G   7% /mnt/boot-sav/nvme0n1p2
/dev/sda1                   vfat      511M  4.0K  511M   1% /mnt/boot-sav/sda1

=================== fdisk -l:
Disk /dev/loop0: 143.5 MiB, 150470656 bytes, 293888 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 53.7 MiB, 56315904 bytes, 109992 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 14.8 MiB, 15458304 bytes, 30192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 1008 KiB, 1032192 bytes, 2016 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 91.1 MiB, 95522816 bytes, 186568 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 4 MiB, 4214784 bytes, 8232 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 35.3 MiB, 37027840 bytes, 72320 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 3.7 MiB, 3846144 bytes, 7512 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/nvme0n1: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Disk model: RPFTJ128PDD2EWX
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: C6F82CD0-B1F4-474A-ABA1-87B202CE3C43

Device           Start       End   Sectors   Size Type
/dev/nvme0n1p1    2048   1050623   1048576   512M EFI System
/dev/nvme0n1p2 1050624 250068991 249018368 118.8G Linux filesystem


Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: ST1000LM035-1RK1
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: EC76D61D-2973-4B25-B045-E20E486F7CDE

Device       Start        End    Sectors  Size Type
/dev/sda1     2048    1050623    1048576  512M EFI System
/dev/sda2  1050624 1953523711 1952473088  931G Linux LVM


Disk /dev/mapper/ubuntu--vg-root: 930.1 GiB, 998638616576 bytes, 1950466048 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mapper/ubuntu--vg-swap_1: 976 MiB, 1023410176 bytes, 1998848 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/loop8: 53.7 MiB, 56315904 bytes, 109992 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes




=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to sign-grub) and reinstall the grub-efi-amd64-signed of mapper/ubuntu--vg-root, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !


=================== User settings
The settings chosen by the user will not act on the boot.

Gaulois Matter !

Hors ligne

#18 Le 13/04/2019, à 19:28

lucmars

Re : Bug à la fin de l'installation Ubuntu

Désolé, je n'y vois rien de clair pour ma part, p'tete pour d'autre...


Gaulois Matter !

Hors ligne