#1 Le 07/05/2019, à 15:04
- toonsdid
plante après GRuB
bonjour à tous,
je me permets de vous demander de l'aide. En effet, j'ai installé Ubuntu sur cette machine (ordinateur portable ayant toujours fonctionné sous W8 jusqu'à gros plantage) depuis plusieurs mois maintenant. Tout formaté et installation direct sur le DD principal. Bref, je suis allé à l'essentiel. Sauf que je n'ai, depuis le début, aucune stabilité. En gros, le phénomène reste sensiblement le même, la cause, elle, est plus obscure. D'où ma venue ici.
Sans causes identiques, en apparence, le pc plante après la validation de GRuB. Validation, écran figé et ordi qui ne "travaille" plus juste quelques secondes après...
Aujourd'hui, j'ai appris les touches "SEIUB" qui m'ont permis un redémarrage "propre". Je regardais une vidéo sur YT, je téléchargeais un fichier et à 99%... ça patauge et patatra, écran figé ...Pourtant, après le reboot, blocage après "GRuB".
A savoir que j'ai tenté plusieurs fois de "réparer" l'erreur. Toutes se sont soldées par une réinstallation complète. (la dernière est récente, quelques jours seulement !!!)
voici le lien de bootinfo
je suppose que ça pourrait aider.
mode recovery plante et demande de faire un scan manuel du disque. Tout va bien à ce niveau.
Bref, auriez vous une astuce concernant ce problème?
merci pour votre aide
Dernière modification par toonsdid (Le 07/05/2019, à 15:31)
Hors ligne
#2 Le 07/05/2019, à 22:50
- Nuliel
Re : plante après GRuB
Le pc est il encore sous garantie?
Quel est le modèle de pc?
Tu pouvais éviter LVM (et le chiffrement?)
Ca met du temps pour planter? Combien de temps en moyenne?
Hors ligne
#3 Le 08/05/2019, à 06:35
- xubu1957
Re : plante après GRuB
Bonjour,
Collage du Boot-Info :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No known boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: LVM2_member
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: /mnt/BootInfo/sdb1: /dev/sdb1 already mounted or mount point busy.
sdb2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: According to the info in the boot sector, sdb2 starts
at sector 0. But according to the info from fdisk,
sdb2 starts at sector 3830956. According to the info
in the boot sector, sdb2 has 0 sectors.
Mounting failed: mount: /mnt/BootInfo/sdb1: /dev/sdb1 already mounted or mount point busy.
mount: /mnt/BootInfo/sdb2: /dev/sdb2 already mounted or mount point busy.
ubuntu-vg-root: ________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
ubuntu-vg-swap_1: ______________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,953,523,711 1,952,473,088 Logical Volume Manager (LVM) partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1.9 GiB, 1996488704 bytes, 3899392 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 0 3,899,391 3,899,392 0 Empty
/dev/sdb2 3,830,956 3,835,883 4,928 ef EFI (FAT-12/16/32)
/dev/sdb1 overlaps with /dev/sdb2
GUID Partition Table detected, but does not seem to be used.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 + R 0 3,899,335 3,899,336 Data partition (Windows/Linux)
/dev/sdb2 + R 3,830,956 3,835,883 4,928 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/mapper/ubuntu--vg-root 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5 ext4
/dev/mapper/ubuntu--vg-swap_1 f7ac7a94-230a-489b-a85e-1baed7ef9b5e swap
/dev/sda1 C9A7-05EC vfat
/dev/sda2 vS1Slq-t7nJ-Tlnc-m8Ka-86I3-MDjm-Sgodq1 LVM2_member
/dev/sdb1 2019-02-10-00-27-34-00 iso9660 Ubuntu 18.04.2 LTS amd64
/dev/sdb2 5655-3E5A vfat
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 May 7 12:51 ata-HGST_HTS541010A9E680_JA4000CRG2321C -> ../../sda
lrwxrwxrwx 1 root root 10 May 7 12:51 ata-HGST_HTS541010A9E680_JA4000CRG2321C-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 7 12:51 ata-HGST_HTS541010A9E680_JA4000CRG2321C-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 May 7 12:23 ata-TSSTcorp_CDDVDW_SU-228CB_R93Q6YCD7023YT -> ../../sr0
lrwxrwxrwx 1 root root 10 May 7 12:51 dm-name-ubuntu--vg-root -> ../../dm-0
lrwxrwxrwx 1 root root 10 May 7 12:51 dm-name-ubuntu--vg-swap_1 -> ../../dm-1
lrwxrwxrwx 1 root root 10 May 7 12:51 dm-uuid-LVM-87ERqJZ56Zgw2trcIoMKuhpnPzsRag4h0gqWxPCzfXg3wWmXJ4JiSqqAI1ncHdEw -> ../../dm-0
lrwxrwxrwx 1 root root 10 May 7 12:51 dm-uuid-LVM-87ERqJZ56Zgw2trcIoMKuhpnPzsRag4hwQ5Jz2xKbYneO6uwuSUR5buFLMAMXsPo -> ../../dm-1
lrwxrwxrwx 1 root root 10 May 7 12:51 lvm-pv-uuid-vS1Slq-t7nJ-Tlnc-m8Ka-86I3-MDjm-Sgodq1 -> ../../sda2
lrwxrwxrwx 1 root root 9 May 7 12:23 usb-SONY_Mass_Storage_BX903D0CE5-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 7 12:23 usb-SONY_Mass_Storage_BX903D0CE5-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May 7 12:23 usb-SONY_Mass_Storage_BX903D0CE5-0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 May 7 12:51 wwn-0x5000cca79bc0f440 -> ../../sda
lrwxrwxrwx 1 root root 10 May 7 12:51 wwn-0x5000cca79bc0f440-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 7 12:51 wwn-0x5000cca79bc0f440-part2 -> ../../sda2
========================= "ls -R /dev/mapper/" output: =========================
/dev/mapper:
control
ubuntu--vg-root
ubuntu--vg-swap_1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb /cdrom iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
========================== sda1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5 root lvmid/87ERqJ-Z56Z-gw2t-rcIo-MKuh-pnPz-sRag4h/0gqWxP-CzfX-g3wW-mXJ4-JiSq-qAI1-ncHdEw
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
====================== ubuntu-vg-root/boot/grub/grub.cfg: ======================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
# GRUB lacks write support for lvm, so recordfail support is disabled.
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod lvm
insmod ext2
set root='lvmid/87ERqJ-Z56Z-gw2t-rcIo-MKuh-pnPz-sRag4h/0gqWxP-CzfX-g3wW-mXJ4-JiSq-qAI1-ncHdEw'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='lvmid/87ERqJ-Z56Z-gw2t-rcIo-MKuh-pnPz-sRag4h/0gqWxP-CzfX-g3wW-mXJ4-JiSq-qAI1-ncHdEw' 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5
else
search --no-floppy --fs-uuid --set=root 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
if [ $grub_platform = efi ]; then
set timeout=30
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-6b6d44ac-8908-4e96-945a-7a38cbe5cfe5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod lvm
insmod ext2
set root='lvmid/87ERqJ-Z56Z-gw2t-rcIo-MKuh-pnPz-sRag4h/0gqWxP-CzfX-g3wW-mXJ4-JiSq-qAI1-ncHdEw'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='lvmid/87ERqJ-Z56Z-gw2t-rcIo-MKuh-pnPz-sRag4h/0gqWxP-CzfX-g3wW-mXJ4-JiSq-qAI1-ncHdEw' 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5
else
search --no-floppy --fs-uuid --set=root 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5
fi
linux /boot/vmlinuz-4.18.0-18-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.18.0-18-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-6b6d44ac-8908-4e96-945a-7a38cbe5cfe5' {
menuentry 'Ubuntu, avec Linux 4.18.0-18-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.18.0-18-generic-advanced-6b6d44ac-8908-4e96-945a-7a38cbe5cfe5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod lvm
insmod ext2
set root='lvmid/87ERqJ-Z56Z-gw2t-rcIo-MKuh-pnPz-sRag4h/0gqWxP-CzfX-g3wW-mXJ4-JiSq-qAI1-ncHdEw'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='lvmid/87ERqJ-Z56Z-gw2t-rcIo-MKuh-pnPz-sRag4h/0gqWxP-CzfX-g3wW-mXJ4-JiSq-qAI1-ncHdEw' 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5
else
search --no-floppy --fs-uuid --set=root 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5
fi
echo 'Chargement de Linux 4.18.0-18-generic…'
linux /boot/vmlinuz-4.18.0-18-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.18.0-18-generic
}
menuentry 'Ubuntu, with Linux 4.18.0-18-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.18.0-18-generic-recovery-6b6d44ac-8908-4e96-945a-7a38cbe5cfe5' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod lvm
insmod ext2
set root='lvmid/87ERqJ-Z56Z-gw2t-rcIo-MKuh-pnPz-sRag4h/0gqWxP-CzfX-g3wW-mXJ4-JiSq-qAI1-ncHdEw'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='lvmid/87ERqJ-Z56Z-gw2t-rcIo-MKuh-pnPz-sRag4h/0gqWxP-CzfX-g3wW-mXJ4-JiSq-qAI1-ncHdEw' 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5
else
search --no-floppy --fs-uuid --set=root 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5
fi
echo 'Chargement de Linux 4.18.0-18-generic…'
linux /boot/vmlinuz-4.18.0-18-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.18.0-18-generic
}
menuentry 'Ubuntu, avec Linux 4.18.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.18.0-15-generic-advanced-6b6d44ac-8908-4e96-945a-7a38cbe5cfe5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod lvm
insmod ext2
set root='lvmid/87ERqJ-Z56Z-gw2t-rcIo-MKuh-pnPz-sRag4h/0gqWxP-CzfX-g3wW-mXJ4-JiSq-qAI1-ncHdEw'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='lvmid/87ERqJ-Z56Z-gw2t-rcIo-MKuh-pnPz-sRag4h/0gqWxP-CzfX-g3wW-mXJ4-JiSq-qAI1-ncHdEw' 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5
else
search --no-floppy --fs-uuid --set=root 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5
fi
echo 'Chargement de Linux 4.18.0-15-generic…'
linux /boot/vmlinuz-4.18.0-15-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.18.0-15-generic
}
menuentry 'Ubuntu, with Linux 4.18.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.18.0-15-generic-recovery-6b6d44ac-8908-4e96-945a-7a38cbe5cfe5' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod lvm
insmod ext2
set root='lvmid/87ERqJ-Z56Z-gw2t-rcIo-MKuh-pnPz-sRag4h/0gqWxP-CzfX-g3wW-mXJ4-JiSq-qAI1-ncHdEw'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='lvmid/87ERqJ-Z56Z-gw2t-rcIo-MKuh-pnPz-sRag4h/0gqWxP-CzfX-g3wW-mXJ4-JiSq-qAI1-ncHdEw' 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5
else
search --no-floppy --fs-uuid --set=root 6b6d44ac-8908-4e96-945a-7a38cbe5cfe5
fi
echo 'Chargement de Linux 4.18.0-15-generic…'
linux /boot/vmlinuz-4.18.0-15-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.18.0-15-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
========================== ubuntu-vg-root/etc/fstab: ===========================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/ubuntu--vg-root / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=C9A7-05EC /boot/efi vfat umask=0077 0 1
/dev/mapper/ubuntu--vg-swap_1 none swap sw 0 0
--------------------------------------------------------------------------------
============== ubuntu-vg-root: Location of files loaded by Grub: ===============
GiB - GB File Fragment(s)
840.133277893 = 902.086238208 boot/grub/grub.cfg 1
2.179683685 = 2.340417536 boot/vmlinuz-4.18.0-15-generic 2
484.836090088 = 520.588787712 boot/vmlinuz-4.18.0-18-generic 1
2.179683685 = 2.340417536 vmlinuz 2
487.256923676 = 523.188137984 boot/initrd.img-4.18.0-15-generic 3
0.397747040 = 0.427077632 boot/initrd.img-4.18.0-18-generic 4
487.256923676 = 523.188137984 initrd.img 3
487.256923676 = 523.188137984 initrd.img.old 3
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown MBR on /dev/sdb
00000000 45 52 08 00 00 00 90 90 00 00 00 00 00 00 00 00 |ER..............|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 33 ed fa 8e d5 bc 00 7c fb fc 66 31 db 66 31 c9 |3......|..f1.f1.|
00000030 66 53 66 51 06 57 8e dd 8e c5 52 be 00 7c bf 00 |fSfQ.W....R..|..|
00000040 06 b9 00 01 f3 a5 ea 4b 06 00 00 52 b4 41 bb aa |.......K...R.A..|
00000050 55 31 c9 30 f6 f9 cd 13 72 16 81 fb 55 aa 75 10 |U1.0....r...U.u.|
00000060 83 e1 01 74 0b 66 c7 06 f3 06 b4 42 eb 15 eb 02 |...t.f.....B....|
00000070 31 c9 5a 51 b4 08 cd 13 5b 0f b6 c6 40 50 83 e1 |1.ZQ....[...@P..|
00000080 3f 51 f7 e1 53 52 50 bb 00 7c b9 04 00 66 a1 b0 |?Q..SRP..|...f..|
00000090 07 e8 44 00 0f 82 80 00 66 40 80 c7 02 e2 f2 66 |..D.....f@.....f|
000000a0 81 3e 40 7c fb c0 78 70 75 09 fa bc ec 7b ea 44 |.>@|..xpu....{.D|
000000b0 7c 00 00 e8 83 00 69 73 6f 6c 69 6e 75 78 2e 62 ||.....isolinux.b|
000000c0 69 6e 20 6d 69 73 73 69 6e 67 20 6f 72 20 63 6f |in missing or co|
000000d0 72 72 75 70 74 2e 0d 0a 66 60 66 31 d2 66 03 06 |rrupt...f`f1.f..|
000000e0 f8 7b 66 13 16 fc 7b 66 52 66 50 06 53 6a 01 6a |.{f...{fRfP.Sj.j|
000000f0 10 89 e6 66 f7 36 e8 7b c0 e4 06 88 e1 88 c5 92 |...f.6.{........|
00000100 f6 36 ee 7b 88 c6 08 e1 41 b8 01 02 8a 16 f2 7b |.6.{....A......{|
00000110 cd 13 8d 64 10 66 61 c3 e8 1e 00 4f 70 65 72 61 |...d.fa....Opera|
00000120 74 69 6e 67 20 73 79 73 74 65 6d 20 6c 6f 61 64 |ting system load|
00000130 20 65 72 72 6f 72 2e 0d 0a 5e ac b4 0e 8a 3e 62 | error...^....>b|
00000140 04 b3 07 cd 10 3c 0a 75 f1 cd 18 f4 eb fd 00 00 |.....<.u........|
00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001b0 dc 39 3a 00 00 00 00 00 b6 3a 99 40 00 00 80 00 |.9:......:.@....|
000001c0 01 00 00 76 e0 ff 00 00 00 00 00 80 3b 00 00 fe |...v........;...|
000001d0 ff ff ef fe ff ff ac 74 3a 00 40 13 00 00 00 00 |.......t:.@.....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
/dev/sdb1: unknown GPT attributes
1000000000000001
/dev/sdb2: unknown GPT attributes
1000000000000001
Unknown BootLoader on sdb1
00000000 45 52 08 00 00 00 90 90 00 00 00 00 00 00 00 00 |ER..............|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 33 ed fa 8e d5 bc 00 7c fb fc 66 31 db 66 31 c9 |3......|..f1.f1.|
00000030 66 53 66 51 06 57 8e dd 8e c5 52 be 00 7c bf 00 |fSfQ.W....R..|..|
00000040 06 b9 00 01 f3 a5 ea 4b 06 00 00 52 b4 41 bb aa |.......K...R.A..|
00000050 55 31 c9 30 f6 f9 cd 13 72 16 81 fb 55 aa 75 10 |U1.0....r...U.u.|
00000060 83 e1 01 74 0b 66 c7 06 f3 06 b4 42 eb 15 eb 02 |...t.f.....B....|
00000070 31 c9 5a 51 b4 08 cd 13 5b 0f b6 c6 40 50 83 e1 |1.ZQ....[...@P..|
00000080 3f 51 f7 e1 53 52 50 bb 00 7c b9 04 00 66 a1 b0 |?Q..SRP..|...f..|
00000090 07 e8 44 00 0f 82 80 00 66 40 80 c7 02 e2 f2 66 |..D.....f@.....f|
000000a0 81 3e 40 7c fb c0 78 70 75 09 fa bc ec 7b ea 44 |.>@|..xpu....{.D|
000000b0 7c 00 00 e8 83 00 69 73 6f 6c 69 6e 75 78 2e 62 ||.....isolinux.b|
000000c0 69 6e 20 6d 69 73 73 69 6e 67 20 6f 72 20 63 6f |in missing or co|
000000d0 72 72 75 70 74 2e 0d 0a 66 60 66 31 d2 66 03 06 |rrupt...f`f1.f..|
000000e0 f8 7b 66 13 16 fc 7b 66 52 66 50 06 53 6a 01 6a |.{f...{fRfP.Sj.j|
000000f0 10 89 e6 66 f7 36 e8 7b c0 e4 06 88 e1 88 c5 92 |...f.6.{........|
00000100 f6 36 ee 7b 88 c6 08 e1 41 b8 01 02 8a 16 f2 7b |.6.{....A......{|
00000110 cd 13 8d 64 10 66 61 c3 e8 1e 00 4f 70 65 72 61 |...d.fa....Opera|
00000120 74 69 6e 67 20 73 79 73 74 65 6d 20 6c 6f 61 64 |ting system load|
00000130 20 65 72 72 6f 72 2e 0d 0a 5e ac b4 0e 8a 3e 62 | error...^....>b|
00000140 04 b3 07 cd 10 3c 0a 75 f1 cd 18 f4 eb fd 00 00 |.....<.u........|
00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001b0 dc 39 3a 00 00 00 00 00 b6 3a 99 40 00 00 80 00 |.9:......:.@....|
000001c0 01 00 00 76 e0 ff 00 00 00 00 00 80 3b 00 00 fe |...v........;...|
000001d0 ff ff ef fe ff ff ac 74 3a 00 40 13 00 00 00 00 |.......t:.@.....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/20481/mountinfo) leaked on lvs invocation. Parent PID 28463: bash
File descriptor 63 (pipe:[134262]) leaked on lvs invocation. Parent PID 28463: bash
File descriptor 9 (/proc/20481/mountinfo) leaked on lvchange invocation. Parent PID 29270: bash
File descriptor 63 (pipe:[134262]) leaked on lvchange invocation. Parent PID 29270: bash
File descriptor 9 (/proc/20481/mountinfo) leaked on lvchange invocation. Parent PID 29270: bash
File descriptor 63 (pipe:[134262]) leaked on lvchange invocation. Parent PID 29270: bash
mdadm: No arrays found in config file or automatically
ADDITIONAL INFORMATION :
=================== log of boot-info 20190507_1251 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
BLKID BEFORE LVM ACTIVATION:
/dev/sda1: UUID="C9A7-05EC" TYPE="vfat" PARTUUID="6a038c83-1562-42e5-8223-4035c5471ac3"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda2: UUID="vS1Slq-t7nJ-Tlnc-m8Ka-86I3-MDjm-Sgodq1" TYPE="LVM2_member" PARTUUID="f99e302c-0839-4837-a8d6-47125640c228"
/dev/sdb2: SEC_TYPE="msdos" UUID="5655-3E5A" TYPE="vfat" PARTUUID="40993ab6-02"
/dev/mapper/ubuntu--vg-root: UUID="6b6d44ac-8908-4e96-945a-7a38cbe5cfe5" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="f7ac7a94-230a-489b-a85e-1baed7ef9b5e" TYPE="swap"
/dev/sdb1: UUID="2019-02-10-00-27-34-00" LABEL="Ubuntu 18.04.2 LTS amd64" TYPE="iso9660" PTUUID="40993ab6" PTTYPE="dos" PARTUUID="40993ab6-01"
MODPROBE
VGSCAN
File descriptor 9 (/proc/20481/mountinfo) leaked on vgscan invocation. Parent PID 20489: /bin/bash
Reading volume groups from cache.
Found volume group "ubuntu-vg" using metadata type lvm2
VGCHANGE
File descriptor 9 (/proc/20481/mountinfo) leaked on vgchange invocation. Parent PID 20489: /bin/bash
2 logical volume(s) in volume group "ubuntu-vg" now active
File descriptor 9 (/proc/20481/mountinfo) leaked on lvscan invocation. Parent PID 20489: /bin/bash
LVSCAN:
ACTIVE '/dev/ubuntu-vg/root' [930.05 GiB] inherit
ACTIVE '/dev/ubuntu-vg/swap_1' [976.00 MiB] inherit
Gtk-Message: 12:51:24.841: GtkDialog mapped without a transient parent. This is discouraged.
Is there RAID on this computer? no
grub-probe: error: cannot find a GRUB drive for /dev/sdb1. Check your device.map.
File descriptor 9 (/proc/20481/mountinfo) leaked on vgs invocation. Parent PID 22360: grub-probe
File descriptor 9 (/proc/20481/mountinfo) leaked on vgs invocation. Parent PID 22360: grub-probe
Warning: Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only.
Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes.
boot-info is executed in live-session (Ubuntu 18.04.2 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
ls: cannot access '/home/usr/.config': No such file or directory
[dmraid -sa -c] no
[dmraid -sa -c] raid
[dmraid -sa -c] disks
Set sda as corresponding disk of mapper/ubuntu--vg-root
=================== os-prober:
/dev/mapper/ubuntu--vg-root:Ubuntu 18.04.2 LTS (18.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="C9A7-05EC" TYPE="vfat" PARTUUID="6a038c83-1562-42e5-8223-4035c5471ac3"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda2: UUID="vS1Slq-t7nJ-Tlnc-m8Ka-86I3-MDjm-Sgodq1" TYPE="LVM2_member" PARTUUID="f99e302c-0839-4837-a8d6-47125640c228"
/dev/sdb2: SEC_TYPE="msdos" UUID="5655-3E5A" TYPE="vfat" PARTUUID="40993ab6-02"
/dev/mapper/ubuntu--vg-root: UUID="6b6d44ac-8908-4e96-945a-7a38cbe5cfe5" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="f7ac7a94-230a-489b-a85e-1baed7ef9b5e" TYPE="swap"
/dev/sdb1: UUID="2019-02-10-00-27-34-00" LABEL="Ubuntu 18.04.2 LTS amd64" TYPE="iso9660" PTUUID="40993ab6" PTTYPE="dos" PARTUUID="40993ab6-01"
[dmraid -sa -c] no
[dmraid -sa -c] raid
[dmraid -sa -c] disks
Set sda as corresponding disk of mapper/ubuntu--vg-root
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/fbx64.efi
=================== mapper/ubuntu--vg-root/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 May 3 14:20 grub.d
total 80
-rwxr-xr-x 1 root root 10046 Feb 7 23:20 00_header
-rwxr-xr-x 1 root root 6258 Feb 4 19:10 05_debian_theme
-rwxr-xr-x 1 root root 12693 Feb 7 23:20 10_linux
-rwxr-xr-x 1 root root 11298 Feb 7 23:20 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 Feb 7 23:20 30_os-prober
-rwxr-xr-x 1 root root 1418 Feb 7 23:20 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Feb 7 23:20 40_custom
-rwxr-xr-x 1 root root 216 Feb 7 23:20 41_custom
-rw-r--r-- 1 root root 483 Feb 7 23:20 README
=================== mapper/ubuntu--vg-root/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of mapper/ubuntu--vg-root: UUID=C9A7-05EC (sda1)
/usr/share/boot-sav/bs-cmd_terminal.sh: line 179: warning: command substitution: ignored null byte in input
=================== efibootmgr -v
BootCurrent: 0004
Timeout: 0 seconds
BootOrder: 0004,0000,0003
Boot0000* ubuntu HD(1,GPT,6a038c83-1562-42e5-8223-4035c5471ac3,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0003* ubuntu HD(1,GPT,6a038c83-1562-42e5-8223-4035c5471ac3,0x800,0x100000)/File(EFIUbuntugrubx64.efi)
Boot0004* UEFI: SONY Mass Storage 0100 PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(2,0)/HD(1,MBR,0x40993ab6,0x3a74ac,0x1340)AMBO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
mapper/ubuntu--vg-root : sda, not-sepboot, grubenv-ok grub2, signed grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/mapper/ubuntu--vg-root.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA HGST HTS541010A9:;
1:1049kB:538MB:537MB:fat32::boot, esp;
2:538MB:1000GB:1000GB:::lvm;
BYT;
/dev/sdb:1996MB:scsi:512:512:unknown:SONY Mass Storage:;
BYT;
/dev/mapper/ubuntu--vg-root:999GB:dm:512:4096:loop:Linux device-mapper (linear):;
1:0.00B:999GB:999GB:ext4::;
BYT;
/dev/mapper/ubuntu--vg-swap_1:1023MB:dm:512:4096:loop:Linux device-mapper (linear):;
1:0.00B:1023MB:1023MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 1.8G
loop1 loop squashfs 91M
loop2 loop squashfs 34.6M
loop3 loop squashfs 140.7M
loop4 loop squashfs 2.3M
loop5 loop squashfs 13M
loop6 loop squashfs 14.5M
loop7 loop squashfs 3.7M
sda disk 931.5G
sda1 part vfat 512M
sda2 part LVM2_member 931G
sdb disk iso9660 1.9G Ubuntu 18.04.2 LTS amd64
sdb1 part iso9660 1.9G Ubuntu 18.04.2 LTS amd64
sdb2 part vfat 2.4M Ubuntu 18.04.2 LTS amd64
sr0 rom 1024M
dm-0 lvm ext4 930.1G
dm-1 lvm swap 976M
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /rofs
loop1 1 1 0 /snap/core/6350
loop2 1 1 0 /snap/gtk-common-themes/818
loop3 1 1 0 /snap/gnome-3-26-1604/74
loop4 1 1 0 /snap/gnome-calculator/260
loop5 1 1 0 /snap/gnome-characters/139
loop6 1 1 0 /snap/gnome-logs/45
loop7 1 1 0 /snap/gnome-system-monitor/57
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0
sdb 1 1 1 running /cdrom
sdb1 1 1 1
sdb2 1 1 1
sr0 1 0 1 running
dm-0 1 0 0 running /mnt/boot-sav/mapper/ubuntu--vg-root
dm-1 1 0 0 running
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1938864k,nr_inodes=484716,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=392264k,mode=755)
/dev/sdb on /cdrom type iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14983)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=392260k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_6350.snap on /snap/core/6350 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_818.snap on /snap/gtk-common-themes/818 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_74.snap on /snap/gnome-3-26-1604/74 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_260.snap on /snap/gnome-calculator/260 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_139.snap on /snap/gnome-characters/139 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_45.snap on /snap/gnome-logs/45 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_57.snap on /snap/gnome-system-monitor/57 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/mapper/ubuntu--vg-root on /mnt/boot-sav/mapper/ubuntu--vg-root type ext4 (rw,relatime)
=================== ls:
/sys/block/dm-0 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/dm-1 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dm-0 dm-1 dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse gpiochip0 hidraw0 hidraw1 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-13 i2c-14 i2c-15 i2c-16 i2c-17 i2c-18 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdb1 sdb2 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout ubuntu-vg uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 video1 zero
ls /dev/mapper: control ubuntu--vg-root ubuntu--vg-swap_1
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 00 04 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 ec 05 a7 c9 4e 4f 20 4e 41 4d 45 20 20 |..)....NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 384M 1.7M 382M 1% /run
/dev/sdb iso9660 1.9G 1.9G 0 100% /cdrom
/dev/loop0 squashfs 1.8G 1.8G 0 100% /rofs
/cow overlay 1.9G 450M 1.5G 24% /
tmpfs tmpfs 1.9G 37M 1.9G 2% /dev/shm
tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
tmpfs tmpfs 1.9G 216K 1.9G 1% /tmp
tmpfs tmpfs 384M 80K 383M 1% /run/user/999
/dev/loop1 squashfs 91M 91M 0 100% /snap/core/6350
/dev/loop2 squashfs 35M 35M 0 100% /snap/gtk-common-themes/818
/dev/loop3 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/74
/dev/loop4 squashfs 2.3M 2.3M 0 100% /snap/gnome-calculator/260
/dev/loop5 squashfs 13M 13M 0 100% /snap/gnome-characters/139
/dev/loop6 squashfs 15M 15M 0 100% /snap/gnome-logs/45
/dev/loop7 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/57
/dev/sda1 vfat 511M 6.1M 505M 2% /mnt/boot-sav/sda1
/dev/mapper/ubuntu--vg-root ext4 915G 12G 857G 2% /mnt/boot-sav/mapper/ubuntu--vg-root
=================== fdisk -l:
Disk /dev/loop0: 1.8 GiB, 1905045504 bytes, 3720792 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 91 MiB, 95408128 bytes, 186344 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 34.6 MiB, 36216832 bytes, 70736 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 140.7 MiB, 147496960 bytes, 288080 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 2.3 MiB, 2355200 bytes, 4600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 14.5 MiB, 15208448 bytes, 29704 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 3.7 MiB, 3878912 bytes, 7576 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: F73541A7-5B75-40B9-9D40-BCFD3A9EFCC6
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 1953523711 1952473088 931G Linux LVM
Disk /dev/sdb: 1.9 GiB, 1996488704 bytes, 3899392 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x40993ab6
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 0 3899391 3899392 1.9G 0 Empty
/dev/sdb2 3830956 3835883 4928 2.4M ef EFI (FAT-12/16/32)
Disk /dev/mapper/ubuntu--vg-root: 930.1 GiB, 998638616576 bytes, 1950466048 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/ubuntu--vg-swap_1: 976 MiB, 1023410176 bytes, 1998848 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to sign-grub) and reinstall the grub-efi-amd64-signed of mapper/ubuntu--vg-root, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sda1/efi/.../grub*.efi file!
=================== User settings
The settings chosen by the user will not act on the boot.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#4 Le 08/05/2019, à 07:34
- moko138
Re : plante après GRuB
j'ai installé Ubuntu sur cette machine (ordinateur portable ayant toujours fonctionné sous W8 jusqu'à gros plantage)
Une grande classique : win plante alors on installe ubuntu sans avoir vérifié que le plantage n'était pas dû à l'usure du disque...
Donc,
En session live_USB ou live DVD :
a) Installer l'utilitaire permettant de voir l'état du disque :
sudo apt-get install --no-install-recommends smartmontools
.
b) Repérer la lettre X exacte attribuée au disque /dev/sdX (elle peut changer entre deux branchements ou démarrages) :
sudo lsblk -o name,fstype,label,size,mountpoint -e 7,11
.
c) Analyser les données SMART :
en remplaçant X par la lettre trouvée précédemment, faire sans ajouter de chiffre :
sudo smartctl -s on -S on -o on -a /dev/sdX
et en donner le retour complet et entre balises-code.
= =
Je rappelle qu'il ne faut pas - grave risque de pertes de données - lancer de fsck ni manuel ni automatique sur un disque matériellement usé !
= =
Nota :
man smartctl
-s VALUE, --smart=VALUE
Enables or disables SMART on device. The valid arguments to this
option are on and off.
-S VALUE, --saveauto=VALUE
[ATA] Enables or disables SMART autosave of device vendor-specific
Attributes. The valid arguments to this option are on and off.
-o VALUE, --offlineauto=VALUE
[ATA only] Enables or disables SMART automatic offline test, which
scans the drive every four hours for disk defects. The valid arguments to this
option are on and off.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#5 Le 08/05/2019, à 11:34
- toonsdid
Re : plante après GRuB
Bonjour Naziel, xubu1957, moko138 et merci pour votre intérêt.
Le pc est il encore sous garantie?
Quel est le modèle de pc?
Tu pouvais éviter LVM (et le chiffrement?)Ca met du temps pour planter? Combien de temps en moyenne?
Par ordre des questions, non, PC plus sous garantie. C'est un Asus 550cc et qu'est ce que tu entends par éviter le chiffrement LVM?
Le temps étant relatif, l'ordi démarre, m'invite à sélectionner la version d'Ubuntu. Je valide... 1... 2 ... 3... et un peu près entre le 2 et le 3, l'écran reste mauve, et plus rien ne se passe...
Une grande classique : win plante alors on installe ubuntu sans avoir vérifié que le plantage n'était pas dû à l'usure du disque...
jamais eu de précédent, donc oui pas vérifié.
pour info, je suis en Live USB et je vais m'occuper de la vérification
Hors ligne
#6 Le 08/05/2019, à 11:46
- Nuliel
Re : plante après GRuB
En parallèle, dans le menu grub (celui au démarrage) tu fais e pour éditer le démarrage d'ubuntu: tu rajoutes
modprobe.blacklist=nouveau modprobe.blacklist=nvidia
entre quiet et splash. Puis tu fais F10 pour démarrer et tu dis si ça démarre ou pas.
Edit: inutile vu le retour smart
Dernière modification par Nuliel (Le 08/05/2019, à 12:10)
Hors ligne
#7 Le 08/05/2019, à 11:57
- toonsdid
Re : plante après GRuB
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.18.0-15-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: HGST Travelstar 5K1000
Device Model: HGST HTS541010A9E680
Serial Number: JA4000CRG2321C
LU WWN Device Id: 5 000cca 79bc0f440
Firmware Version: JA0OA560
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed May 8 09:53:04 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Attribute Autosave Enabled.
SMART Automatic Offline Testing Enabled every four hours.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 243) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 099 099 062 Pre-fail Always - 196608
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 0
4 Start_Stop_Count 0x0012 094 094 000 Old_age Always - 10328
5 Reallocated_Sector_Ct 0x0033 095 095 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 2957
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2951
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 63
193 Load_Cycle_Count 0x0012 096 096 000 Old_age Always - 47069
194 Temperature_Celsius 0x0002 206 206 000 Old_age Always - 29 (Min/Max 10/46)
196 Reallocated_Event_Count 0x0032 096 096 000 Old_age Always - 310
197 Current_Pending_Sector 0x0022 078 078 000 Old_age Always - 720
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 3364 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3364 occurred at disk power-on lifetime: 2956 hours (123 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 10 52 00 Error: UNC at LBA = 0x005210a8 = 5378216
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 e0 a8 10 52 40 00 00:27:24.762 READ FPDMA QUEUED
60 08 d8 a0 10 52 40 00 00:27:24.755 READ FPDMA QUEUED
60 08 d0 98 10 52 40 00 00:27:24.754 READ FPDMA QUEUED
60 08 c8 90 10 52 40 00 00:27:24.753 READ FPDMA QUEUED
60 08 c0 88 10 52 40 00 00:27:24.752 READ FPDMA QUEUED
Error 3363 occurred at disk power-on lifetime: 2956 hours (123 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 38 a8 11 52 00 Error: UNC at LBA = 0x005211a8 = 5378472
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 20 e8 0f 52 40 00 00:27:20.378 READ FPDMA QUEUED
60 00 d0 e0 10 52 40 00 00:27:20.349 READ FPDMA QUEUED
60 08 c8 e0 0f 52 40 00 00:27:20.349 READ FPDMA QUEUED
ef 10 03 00 00 00 a0 00 00:27:20.348 SET FEATURES [Enable SATA feature]
ef 10 02 00 00 00 a0 00 00:27:20.348 SET FEATURES [Enable SATA feature]
Error 3362 occurred at disk power-on lifetime: 2956 hours (123 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 38 a8 10 52 00 Error: UNC at LBA = 0x005210a8 = 5378216
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 a0 e0 0f 52 40 00 00:27:16.063 READ FPDMA QUEUED
60 00 98 e0 0e 52 40 00 00:27:16.040 READ FPDMA QUEUED
60 00 90 e0 0d 52 40 00 00:27:16.017 READ FPDMA QUEUED
60 00 88 e0 0c 52 40 00 00:27:15.994 READ FPDMA QUEUED
60 00 80 e0 0b 52 40 00 00:27:15.971 READ FPDMA QUEUED
Error 3361 occurred at disk power-on lifetime: 2956 hours (123 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 10 52 00 Error: UNC at LBA = 0x005210a8 = 5378216
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 b0 a8 10 52 40 00 00:16:23.320 READ FPDMA QUEUED
60 08 a8 a0 10 52 40 00 00:16:23.312 READ FPDMA QUEUED
60 08 a0 98 10 52 40 00 00:16:23.311 READ FPDMA QUEUED
60 08 98 90 10 52 40 00 00:16:23.310 READ FPDMA QUEUED
60 08 90 88 10 52 40 00 00:16:23.309 READ FPDMA QUEUED
Error 3360 occurred at disk power-on lifetime: 2956 hours (123 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 38 a8 11 52 00 Error: UNC at LBA = 0x005211a8 = 5378472
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 e8 e8 0f 52 40 00 00:16:18.924 READ FPDMA QUEUED
60 00 60 e0 10 52 40 00 00:16:18.896 READ FPDMA QUEUED
60 08 e0 e0 0f 52 40 00 00:16:18.896 READ FPDMA QUEUED
ef 10 03 00 00 00 a0 00 00:16:18.895 SET FEATURES [Enable SATA feature]
ef 10 02 00 00 00 a0 00 00:16:18.895 SET FEATURES [Enable SATA feature]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
est-ce que cela convient?
Hors ligne
#8 Le 08/05/2019, à 12:07
- Nuliel
Re : plante après GRuB
Ton disque part en sucette: 720 secteurs en attente de réallocation, 310 déjà réalloués, peut être beaucoup de parcages (47069 en 2957 ce qui fait une moyenne d'un parcage toutes les 4 mins)
Mais c'est bizarre: le disque n'a visiblement pas pris de chocs, pas de problème je pense avec la surface du disque, peut être les têtes? Le disque est pas vieux en plus.
En tout cas, si ce n'est pas déjà fait, commence par récupérer tes données depuis un live usb.
Hors ligne
#9 Le 08/05/2019, à 13:14
- toonsdid
Re : plante après GRuB
Merci Naziel. Comment te dire? Forcément pas très ravi de savoir ça car d'après tes dires, peu de probabilités que ce soit autre chose. Le point positif, c'est l'avancée majeure concernant ce problème... le manque de fiabilité et le temps passé à résoudre cette énigme peuvent être derrière moi à ce niveau.
Pour info, on a acheté 2 pc identiques le même jour (merci les promos). Le disque dur de l'autre a lâché il y a peu de temps. 6-7 ans je crois pour l'achat, avec une utilisation plutôt réduite en ce qui me concerne. Bienvenue dans le monde éphémère de la technologie
mise à part ça, dois-je me rendre à l'évidence qu'il faille lui dire adieu à ce DD?
Hors ligne
#10 Le 08/05/2019, à 13:58
- Nuliel
Re : plante après GRuB
Bah c'est pas normal qu'un disque ait autant de secteurs défectueux en si peu de temps. Normalement c'est pour durer bien plus longtemps.
mise à part ça, dois-je me rendre à l'évidence qu'il faille lui dire adieu à ce DD?
Ça dépend: si c'est la tête qui a un problème, la réponse est oui. Si ce n'est pas la tête et que les erreurs sont localisées sur le disque, une solution qui allongerait la durée de vie du disque serait de mettre les partitions en dehors de ces zones.
Peut être qu'un test smart long permettrait d'y voir plus clair sur l'origine de la panne. Qu'en penses tu moko138?
Il y a beaucoup de pc Asus 550cc (des récents et des moins récents), tu peux donner le modèle exact afin de savoir quel processeur est dedans et quelle puce graphique est dedans? Normalement, le disque dur est facile à changer, si tu blindes pas tes disques avec des gros fichiers (films/jeux/...) tu pourrais prendre un ssd de 256 Go (ou 128 Go si tu stockes peu de choses dessus) plutôt qu'un gros disque de 1 To
Edit: ou un formatage bas niveau si c'est possible?
Dernière modification par Nuliel (Le 08/05/2019, à 14:35)
Hors ligne
#11 Le 08/05/2019, à 15:05
- toonsdid
Re : plante après GRuB
Bah c'est pas normal qu'un disque ait autant de secteurs défectueux en si peu de temps. Normalement c'est pour durer bien plus longtemps.
Mystère de l'informatique???
Ça dépend: si c'est la tête qui a un problème, la réponse est oui. Si ce n'est pas la tête et que les erreurs sont localisées sur le disque, une solution qui allongerait la durée de vie du disque serait de mettre les partitions en dehors de ces zones.
Peut être qu'un test smart long permettrait d'y voir plus clair sur l'origine de la panne. Qu'en penses tu moko138?
on va patienter dans ce cas là. Si c'est possible, on préfère le recyclage
Petite confusion qui pourrait avoir son importance. Je me rappelle pourquoi j'utilise la référence 550cc... rectification... 510cc.
pour être complet à ce niveau :
ASUS R510CC-XX476H - Core i5 3337U / 1.8 GHz - Win 8 64-bit - 4 Go RAM - 1 To HDD - graveur de DVD - 15.6" 1366 x 768 (HD) - GF GT 720M / HD Graphics 4000
le lien vers un site marchand : asus r510cc-xx476h
enfin, sans avoir exprimer mes besoins, tu as vu juste. Effectivement, si je suis amené à changer, je regarderai un DD moins imposant. 250 / 160 Go serait une alternative.
un formatage bas niveau? on peut tenter pourquoi pas...
Dernière modification par toonsdid (Le 08/05/2019, à 15:33)
Hors ligne
#12 Le 08/05/2019, à 16:25
- Nuliel
Re : plante après GRuB
Ok, déjà commence par faire un test smart court (le test long dure 4 h...)
sudo smartctl --smart=on --offlineauto=on --saveauto=on /dev/sda
sudo smartctl -t short /dev/sda
attendre que le test soit fini (en 5 min ça devrait être bon), puis redonne
sudo smartctl -l selftest /dev/sda
sudo smartctl -s on -a /dev/sda
Hors ligne
#13 Le 08/05/2019, à 16:45
- moko138
Re : plante après GRuB
Mécaniquement, il y a de la marge :
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
Et la transmission des données est impeccable :
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
C'est bien le plateau qui est nase :
197 Current_Pending_Sector 0x0022 078 078 000 Old_age Always - 720
.
- -
.
une solution qui allongerait la durée de vie du disque serait de mettre les partitions en dehors de ces zones.
J'ai pratiqué avec bonheur, mais cela présuppose que les secteurs défectueux soient concentrés en une seule zone, comme un atterrissage de tête le provoque.
Rien n'indique que cela soit le cas ici.
- -
.
formatage
Zut ! (soyons poli) il faut encore rappeler État du disque : pour dissiper une confusion ???
.
- -
"Recyclage" ? oui, ce disque est bon pour une reconversion en presse-papier.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#14 Le 08/05/2019, à 16:51
- moko138
Re : plante après GRuB
Rappel :
/!\ Le disque dur supportant vos données personnelles est le dernier truc sur lequel mégoter !
Mais, alors qu'il ne viendrait à l'idée de personne d'acheter à moindre coût :
des champignons estampillés "Tchernobyl" (*),
ou du pain rassis,
eh bien presque tout le monde trouve normal - c'est à peine croyable - de gratter la 12aine d'euros qui sépare un disque bas de gamme d'un disque milieu de gamme.
Et qui pèse des nèfles par rapport à l'achat d'un pc ou d'un smartphone.
____
(*) Mais combien se posent la question en lisant "provenance : communauté européenne" ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#15 Le 08/05/2019, à 16:55
- Nuliel
Re : plante après GRuB
Je parlais d'un formatage bas niveau (en supposant que le constructeur le permette) afin de tenter de réécrire sur les 750 secteurs en attente de réallocation. Mais vu ce que tu dis ça fera pareil qu'un formatage standard. Donc mauvaise idée. (du coup ça sert à quoi un formatage bas niveau?)
J'ai pratiqué avec bonheur, mais cela présuppose que les secteurs défectueux soient concentrés en une seule zone, comme un atterrissage de tête le provoque.
Rien n'indique que cela soit le cas ici.
Si on peut savoir où se trouvent les secteurs défectueux (avec la commande badblocks/scandisk?) on pourrait savoir si les secteurs défectueux sont regroupés non? Ou ils sont maintenant inaccessibles?
HS: j'habite près d'une champignonnière, donc j'ai pas ce problème
Dernière modification par Nuliel (Le 08/05/2019, à 17:11)
Hors ligne
#16 Le 08/05/2019, à 17:50
- moko138
Re : plante après GRuB
Le formatage bas niveau,
C'est une opération capable de (ré)écrire la P-list et d'écrire sur la puce et - je suppose - dans la HPA. Elle ne se pratique que par le fabricant,
ou quand on n'a plus rien à perdre,
qu'avec l'utilitaire fourni par le fabricant. (Si le fabricant le fournit !)
- -
Certaines personnes emploient cette expression dans un autre sens : reformatage précédé d'un zérotage du disque entier.
= =
Les listes - logicielles - de badblocks sont dans les inoeuds des partitions linux. Elles sont donc détruites par un formatage ordinaire. (Elles peuvent être reconstituées mais j'ignore les critères de e2fsck).
Quand smartctl repère un secteur matériellement défectueux, il le note dans la puce du disque, où l'info est presque indestructible.
Empiriquement, à condition qu'il y ait des données dessus et des tentatives d'accès à ces données, on peut consulter dmesg pour voir des "LBA" et "sector" signalés comme défectueux.
SI ils sont géographiquement concentrés - et encore une fois, à ma connaissance, seul un atterrissage de têtes peut faire cela - on extrapole (une dizaine de Go à droite et autant à gauche de ces secteurs) et on prend soin de ne mettre aucune partition dans cette zone.
Autant dire que les conditions ne sont pas réunies à volonté.
= =
Et pour la question que tu as supprimée :
À ma connaissance, un A*us en promo ne se fournit pas chez Romanée Conti.
A fortiori si la bouteille est fendue avant ses 3.000 heures et est griffée "Valstar".
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#17 Le 08/05/2019, à 19:09
- toonsdid
Re : plante après GRuB
oops, en plein débat d'expert. J'admire vos connaissances et les questions qui en découlent.
"Recyclage" ? oui, ce disque est bon pour une reconversion en presse-papier.
n'est-ce pas une des fonctions première??? la dématérialisation notamment du papier...
Rappel :
/!\ Le disque dur supportant vos données personnelles est le dernier truc sur lequel mégoter !Mais, alors qu'il ne viendrait à l'idée de personne d'acheter à moindre coût :
des champignons estampillés "Tchernobyl" (*),
ou du pain rassis,
eh bien presque tout le monde trouve normal - c'est à peine croyable - de gratter la 12aine d'euros qui sépare un disque bas de gamme d'un disque milieu de gamme.
Et qui pèse des nèfles par rapport à l'achat d'un pc ou d'un smartphone.____
(*) Mais combien se posent la question en lisant "provenance : communauté européenne" ?
On est plutôt d'accord même si le cher ne veut pas dire "marche bien", bon, beau...
partant de ce constat, effectivement trouver le compromis entre le budget de base, la qualité, le produit désiré... est pour moi ce qui fixe ma réalité. Et si l'effort est nécessaire, d'un côté comme de l'autre, on est capable de revoir ses prétentions.
et enfin,
À ma connaissance, un A*us en promo ne se fournit pas chez Romanée Conti.
A fortiori si la bouteille est fendue avant ses 3.000 heures et est griffée "Valstar".
ouah, je n'ai pas tout compris l'allusion, même si la promo qui accompagnait cet ordi n'était pas d'être livré avec un Romanée Conti, c'est probable qu'avec les bons d'achat offerts, on aurait pu en déguster une au moins. Merci pour le moteur de recherche et à moko138 qui m'ont permis de découvrir ce qu'était du Conti et ... de la VALSTAR...
Autant en vin... Bon, quelques connaissances et sans plus ... alors en bière... celle là ... inconnu au bataillon...pourtant!!!... questions de générations ou bien???
Bref, sans s'écarter trop du sujet, êtes-vous relativement d'accord pour la manip décrite au dessus ou je laisse encore mijoter les neuronnes?
Dernière modification par toonsdid (Le 08/05/2019, à 19:12)
Hors ligne
#18 Le 08/05/2019, à 19:35
- Nuliel
Re : plante après GRuB
Je viens de remarquer que HGST a été racheté par Western Digital. L'unique utilitaire n'est dispo que pour windows, et je sais même pas s'il permet un formatage bas niveau. Pas sûr que ça vaille le coup...
Hors ligne
#19 Le 08/05/2019, à 20:01
- toonsdid
Re : plante après GRuB
Pas sûr que ça vaille le coup...
d'accord...
et merci infiniment pour ce temps que vous voulez bien partager. Merci Naziel en tous cas pour les messages clairs et instructifs... De toutes façons, dans un premier temps, je vais vous laisser... obligations familiales , je reviendrai certainement demain pour de nouvelles avancées.
N'hésitons pas à tenter le tout pour le tout... quitte à le voir mourir, autant que ce soit fait avec les honneurs... tant mieux s'il ressuscite
Bonne soirée à tous
Hors ligne
#20 Le 08/05/2019, à 21:12
- moko138
Re : plante après GRuB
questions de générations ou bien?
Probablement. Quand j'étais enfant et que les bouteilles étaient en verre et consignées, la Valstar était la bière premier prix, vendue au litre dans des bouteilles d'un litre à bouchon vissant (comme le coca aujourd'hui) mais métallique.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#21 Le 08/05/2019, à 21:24
- nany
Re : plante après GRuB
Bonjour,
questions de générations ou bien?
Probablement. Quand j'étais enfant et que les bouteilles étaient en verre et consignées, la Valstar était la bière premier prix, vendue au litre dans des bouteilles d'un litre à bouchon vissant (comme le coca aujourd'hui) mais métallique.
Yep, et on se faisait de l’argent de poche en rapportant les bouteilles consignées.
Hors ligne
#22 Le 08/05/2019, à 21:33
- moko138
Re : plante après GRuB
Les bouteilles de Valstar vides étaient marron, celles de limonade, transparentes...
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#23 Le 08/05/2019, à 21:34
- Nuliel
Re : plante après GRuB
N'empêche, c'est top niveau écologie!
Hors ligne
#24 Le 09/05/2019, à 15:25
- toonsdid
Re : plante après GRuB
et bien, nostalgie, nostalgie
Bonjour à tous.
On peut voir que ça ravive les mémoires dites donc ce breuvage et ce mode de fonctionnement... Peut-être que revenir à cette méthode, ou en tous cas quelque chose qui ressemblerait à ... nous aiderait à avoir un impact quelque peu différent envers la planète.
bref, en ce qui concerne le problème de disque dur, pas de nouvelles émergentes?
dans le cas contraire, si je dois me relancer dans l'aventure, avec un dd neuf, auriez vous quelques conseils d'"anciens"?
Des tutos existent, certes, sauf que souvent tout et son contraire sont là pour nous induire en erreur d'où ma question.
Enfin, si on se recroise un jour, la tournée de "Valstar" est pour moi
ps : même nany, malgré sa modeste contribution sera conviée
(revenir de l'au delà pour poster un message, moi je dis, c'est super, nany )
Dernière modification par toonsdid (Le 09/05/2019, à 15:28)
Hors ligne
#25 Le 09/05/2019, à 15:33
- Nuliel
Re : plante après GRuB
Alors tant qu'à faire, autant regarder les ssd, tu verras ton pc va revivre à 100 à l'heure
Précision: je n'ai pas connu les bouteilles consignées
Hors ligne