#1 Le 25/08/2019, à 18:47
- tomcg
[Résolu] blocage au démarrage
bonjour
mon 2ème PC (Dell atitude E5510- ubuntu 19-04) ne démarre plus
je demarre le PC:
il se lance:le Grub apparait,
démarrage classique puis j'ai toute une liste de lignes qui apparait et il reste toujours sur la dernière:
started initialize hardware monitoring sensors any system changes.pp link was shunt down...
j'ai tenté au grub un mode recovery avec un clean des fichiers cassés et c'est toujours pareil
D’après ce que je comprend c'est un pb de DD?
merci de votre soutien
tom
Dernière modification par tomcg (Le 30/08/2019, à 17:49)
Ubuntu 20 04
ASUS A751SA-TY066T
Intel® Celeron(R) CPU N3050 @ 1.60GHz × 2
CG Intel® HD Graphics 400 (Braswell)
Hors ligne
#2 Le 26/08/2019, à 08:38
- Caribou22
Re : [Résolu] blocage au démarrage
Bonjour,
Est-ce que tu arrives à booter sur une session live avec cet ordi ? Si oui, tu pourras analyser les données SMART de ton disque dur depuis celle-ci. (Mais je ne maîtrise pas ce sujet.)
Hors ligne
#3 Le 26/08/2019, à 19:46
- tomcg
Re : [Résolu] blocage au démarrage
oui Caribou22 j'arrive à booter avec une session live
le DD est accessible...
mais comment faire pour lire les donner Smart?
Ubuntu 20 04
ASUS A751SA-TY066T
Intel® Celeron(R) CPU N3050 @ 1.60GHz × 2
CG Intel® HD Graphics 400 (Braswell)
Hors ligne
#4 Le 26/08/2019, à 20:09
- Watts
Re : [Résolu] blocage au démarrage
Bonjour,
sudo apt install smartmontools
Puis colle ici entre balise code le résultat de:
sudo smartctl -a /dev/sdX
sdX étant le disque sur lequel tu n'arrives pas à boot (si tu n'es pas sûr, tapes sudo fdisk -l pour le reconnaître)
Acer Aspire X3990-Dual boot Windows 7 / Ubuntu 18.04
Hors ligne
#5 Le 27/08/2019, à 19:11
- tomcg
Re : [Résolu] blocage au démarrage
pour identifier le disque de boot j ai lancer la commande fdisk
voici le resultat
Périphérique Amorçage Start Fin Secteurs Size Id Type
/dev/sda1 * 2048 58595797 58593750 28G 83 Linux
/dev/sda2 58597374 312580095 253982722 121,1G 5 Étendue
/dev/sda5 304607232 312580095 7972864 3,8G 82 partition d'échang
/dev/sda6 58597376 304607231 246009856 117,3G 83 Linux
pourtant je lance la commande sudo smartctl a- /dev/sda1, celle ci est introuvable
Dernière modification par tomcg (Le 27/08/2019, à 19:12)
Ubuntu 20 04
ASUS A751SA-TY066T
Intel® Celeron(R) CPU N3050 @ 1.60GHz × 2
CG Intel® HD Graphics 400 (Braswell)
Hors ligne
#6 Le 27/08/2019, à 19:16
- Watts
Re : [Résolu] blocage au démarrage
Attention, il faut taper:
sudo smartctl -a /dev/sda
Copie colle la ligne si besoin. Le terminal est très sensible.
As tu passé?:
sudo apt install smartmontools
Acer Aspire X3990-Dual boot Windows 7 / Ubuntu 18.04
Hors ligne
#7 Le 27/08/2019, à 19:23
- tomcg
Re : [Résolu] blocage au démarrage
oui voici le resultat de sudo apt install smartmontools
ubuntu@ubuntu:~$ sudo apt install smartmontools
E: Impossible d'obtenir le verrou /var/lib/dpkg/lock - open (11: Ressource temporairement non disponible)
E: Impossible de verrouiller le répertoire d'administration (/var/lib/dpkg/). Il est possible qu'un autre processus l'utilise.
Ubuntu 20 04
ASUS A751SA-TY066T
Intel® Celeron(R) CPU N3050 @ 1.60GHz × 2
CG Intel® HD Graphics 400 (Braswell)
Hors ligne
#8 Le 27/08/2019, à 19:30
- Watts
Re : [Résolu] blocage au démarrage
Tu as une application de mise à jour ouverte? Sinon, essaye d'attendre 5-10 minutes avant de refaire sudo apt install. Pour le moment le verrou est utilisé
Acer Aspire X3990-Dual boot Windows 7 / Ubuntu 18.04
Hors ligne
#9 Le 27/08/2019, à 19:35
- tomcg
Re : [Résolu] blocage au démarrage
non il n y a que le terminal d ouvert, j attends 15mn
Ubuntu 20 04
ASUS A751SA-TY066T
Intel® Celeron(R) CPU N3050 @ 1.60GHz × 2
CG Intel® HD Graphics 400 (Braswell)
Hors ligne
#10 Le 27/08/2019, à 19:36
- Watts
Re : [Résolu] blocage au démarrage
Sûrement que quelque chose fonctionne en arrière plan et utilise des ressources. Si au bout de 15 minutes ça ne marche pas, essaye de redémarrer. En dernier recours on peut supprimer le verrou manuellement, mais je n'ai jamais eu à le faire
Acer Aspire X3990-Dual boot Windows 7 / Ubuntu 18.04
Hors ligne
#11 Le 27/08/2019, à 20:05
- tomcg
Re : [Résolu] blocage au démarrage
avec la commnde sudo apt install smartmontools j ai un pop up sur le terminal
Postfix Configuration
│ │
│ Veuillez choisir la configuration type de votre serveur de messagerie la
│ plus adaptée à vos besoins.
│
│ Pas de configuration :
│ Devrait être choisi pour laisser la configuration actuelle inchangée.
│ Site Internet :
│ L'envoi et la réception s'effectuent directement en SMTP.
│ Site Internet avec un smarthost :
│ Les messages sont reçus directement en SMTP ou grâce à un utilitaire
│ comme fechtmail. Les messages sortants sont envoyés en utilisant un
│ smarthost.
│ Système satellite :
│ Tous les messages sont envoyés vers une autre machine, nommée un
│ smarthost.
│
│ <Ok>
Ubuntu 20 04
ASUS A751SA-TY066T
Intel® Celeron(R) CPU N3050 @ 1.60GHz × 2
CG Intel® HD Graphics 400 (Braswell)
Hors ligne
#12 Le 27/08/2019, à 20:34
- Watts
Re : [Résolu] blocage au démarrage
Normalement tu peux te déplacer avec le clavier et choisir une option, je te conseille "Pas de configuration"
Acer Aspire X3990-Dual boot Windows 7 / Ubuntu 18.04
Hors ligne
#13 Le 28/08/2019, à 17:05
- tomcg
Re : [Résolu] blocage au démarrage
bonjour
j ai ce retour avec la commande. sudo apt install smartmontools
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
The following additional packages will be installed:
bsd-mailx liblockfile-bin liblockfile1 postfix
Paquets suggérés :
procmail postfix-mysql postfix-pgsql postfix-ldap postfix-pcre sasl2-bin
dovecot-common postfix-cdb postfix-doc gsmartcontrol smart-notifier
Les NOUVEAUX paquets suivants seront installés :
bsd-mailx liblockfile-bin liblockfile1 postfix smartmontools
0 mis à jour, 5 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 1 677 ko dans les archives.
Après cette opération, 5 683 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de:1 http://archive.ubuntu.com/ubuntu xenial/main amd64 liblockfile-bin amd64 1.09-6ubuntu1 [10,8 kB]
Réception de:2 http://archive.ubuntu.com/ubuntu xenial/main amd64 liblockfile1 amd64 1.09-6ubuntu1 [8 056 B]
Réception de:3 http://archive.ubuntu.com/ubuntu xenial/main amd64 postfix amd64 3.1.0-3 [1 152 kB]
Réception de:4 http://archive.ubuntu.com/ubuntu xenial/main amd64 bsd-mailx amd64 8.1.2-0.20160123cvs-2 [63,7 kB]
Réception de:5 http://archive.ubuntu.com/ubuntu xenial/main amd64 smartmontools amd64 6.4+svn4214-1 [442 kB]
1 677 ko réceptionnés en 1s (971 ko/s)
Préconfiguration des paquets...
Sélection du paquet liblockfile-bin précédemment désélectionné.
(Lecture de la base de données... 191101 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../liblockfile-bin_1.09-6ubuntu1_amd64.deb ...
Dépaquetage de liblockfile-bin (1.09-6ubuntu1) ...
Sélection du paquet liblockfile1:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../liblockfile1_1.09-6ubuntu1_amd64.deb ...
Dépaquetage de liblockfile1:amd64 (1.09-6ubuntu1) ...
Sélection du paquet postfix précédemment désélectionné.
Préparation du dépaquetage de .../postfix_3.1.0-3_amd64.deb ...
Dépaquetage de postfix (3.1.0-3) ...
Sélection du paquet bsd-mailx précédemment désélectionné.
Préparation du dépaquetage de .../bsd-mailx_8.1.2-0.20160123cvs-2_amd64.deb ...
Dépaquetage de bsd-mailx (8.1.2-0.20160123cvs-2) ...
Sélection du paquet smartmontools précédemment désélectionné.
Préparation du dépaquetage de .../smartmontools_6.4+svn4214-1_amd64.deb ...
Dépaquetage de smartmontools (6.4+svn4214-1) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu3) ...
Traitement des actions différées (« triggers ») pour ureadahead (0.100.0-19) ...
Traitement des actions différées (« triggers ») pour systemd (229-4ubuntu4) ...
Traitement des actions différées (« triggers ») pour ufw (0.35-0ubuntu2) ...
Paramétrage de liblockfile-bin (1.09-6ubuntu1) ...
Paramétrage de liblockfile1:amd64 (1.09-6ubuntu1) ...
Paramétrage de postfix (3.1.0-3) ...
Ajout du groupe « postfix » (GID 129)...
Fait.
Ajout de l'utilisateur système « postfix » (UID 121) ...
Ajout du nouvel utilisateur « postfix » (UID 121) avec pour groupe d'appartenance « postfix » ...
Le répertoire personnel « /var/spool/postfix » n'a pas été créé.
Creating /etc/postfix/dynamicmaps.cf
Ajout du groupe « postdrop » (GID 130)...
Fait.
/etc/aliases does not exist, creating it.
Postfix was not set up. Start with
cp /usr/share/postfix/main.cf.debian /etc/postfix/main.cf
. If you need to make changes, edit
/etc/postfix/main.cf (and others) as needed. To view Postfix configuration
values, see postconf(1).
After modifying main.cf, be sure to run '/etc/init.d/postfix reload'.
Paramétrage de bsd-mailx (8.1.2-0.20160123cvs-2) ...
update-alternatives: utilisation de « /usr/bin/bsd-mailx » pour fournir « /usr/bin/mailx » (mailx) en mode automatique
Paramétrage de smartmontools (6.4+svn4214-1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu3) ...
Traitement des actions différées (« triggers ») pour ureadahead (0.100.0-19) ...
Traitement des actions différées (« triggers ») pour systemd (229-4ubuntu4) ...
Traitement des actions différées (« triggers ») pour ufw (0.35-0ubuntu2) ...
et ca avec la seconde commande sudo smartctl...
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD1600BEVT-75A23T0
Serial Number: WD-WXB1AB098321
LU WWN Device Id: 5 0014ee 25a9aec3e
Firmware Version: 01.01A01
User Capacity: 160 041 885 696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Aug 28 16:03:35 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 52) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 153 147 021 Pre-fail Always - 1341
4 Start_Stop_Count 0x0032 093 093 000 Old_age Always - 7173
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 7017
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 093 093 000 Old_age Always - 7150
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 2096
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 705
193 Load_Cycle_Count 0x0032 078 078 000 Old_age Always - 367831
194 Temperature_Celsius 0x0022 100 091 000 Old_age Always - 43
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
240 Head_Flying_Hours 0x0032 092 092 000 Old_age Always - 6566
241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 10094748485
242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 13219983981
254 Free_Fall_Sensor 0x0032 139 139 000 Old_age Always - 61
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Interrupted (host reset) 10% 6548 -
# 2 Short offline Completed without error 00% 5452 -
# 3 Short offline Completed without error 00% 2693 -
# 4 Short offline Completed without error 00% 1230 -
# 5 Short offline Completed without error 00% 510 -
# 6 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Ubuntu 20 04
ASUS A751SA-TY066T
Intel® Celeron(R) CPU N3050 @ 1.60GHz × 2
CG Intel® HD Graphics 400 (Braswell)
Hors ligne
#14 Le 29/08/2019, à 10:40
- Watts
Re : [Résolu] blocage au démarrage
Ton disque semble dans une bonne forme, même si il dénote que tu allumes souvent ton pc pour moins d'une heure (ou qu'il y a eu beaucoup de reboot). Explorons une autre piste.
Fais un boot info à partir de ton support d'installation en suivant les instructions de ce lien: https://forum.ubuntu-fr.org/viewtopic.php?id=614071
Acer Aspire X3990-Dual boot Windows 7 / Ubuntu 18.04
Hors ligne
#15 Le 29/08/2019, à 20:37
- tomcg
Re : [Résolu] blocage au démarrage
bonjour voici mon rapport online
Ubuntu 20 04
ASUS A751SA-TY066T
Intel® Celeron(R) CPU N3050 @ 1.60GHz × 2
CG Intel® HD Graphics 400 (Braswell)
Hors ligne
#16 Le 29/08/2019, à 22:05
- alh54
Re : [Résolu] blocage au démarrage
Les recherches avec le message d'erreurs orientent vers un souci avec le service lm_sensors. As-tu installé cet utilitaire?
Si oui démarre en recovery mode et désactive ce service puis redémarre normalement pour voir ce que ça donne.
Hors ligne
#17 Le 30/08/2019, à 14:21
- tomcg
Re : [Résolu] blocage au démarrage
bonjour
je ne connais pas cet utilitaire, à moins qu'il ne soit installé d'office il ne doit pas être sur ce PC
Ubuntu 20 04
ASUS A751SA-TY066T
Intel® Celeron(R) CPU N3050 @ 1.60GHz × 2
CG Intel® HD Graphics 400 (Braswell)
Hors ligne
#18 Le 30/08/2019, à 15:26
- Watts
Re : [Résolu] blocage au démarrage
D'après ton boot info, tu serai en 32 bits, tu confirmes?
Acer Aspire X3990-Dual boot Windows 7 / Ubuntu 18.04
Hors ligne
#19 Le 30/08/2019, à 17:05
- tomcg
Re : [Résolu] blocage au démarrage
non il me semble que c'est en 64 bits qu'il est
Ubuntu 20 04
ASUS A751SA-TY066T
Intel® Celeron(R) CPU N3050 @ 1.60GHz × 2
CG Intel® HD Graphics 400 (Braswell)
Hors ligne
#20 Le 30/08/2019, à 17:19
- Caribou22
Re : [Résolu] blocage au démarrage
L'installation de smartmontools a installé des paquets amd64 donc c'est du 64 bits
Est-ce qu'à l'écran où ça bloque, il se passe quelque-chose quand tu fais Ctrl-Alt-F2 ? (Ou Ctrl-Alt-F1, F3, F4, F5, F6, F7)
Le boot-info :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 19.04
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 149.1 GiB, 160041885696 bytes, 312581808 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 58,595,797 58,593,750 83 Linux
/dev/sda2 58,597,374 312,580,095 253,982,722 5 Extended
/dev/sda5 304,607,232 312,580,095 7,972,864 82 Linux swap / Solaris
/dev/sda6 58,597,376 304,607,231 246,009,856 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 bacb25af-e81a-48fa-93d8-02aba9edecb5 ext4
/dev/sda5 cf031278-e0cc-4a24-8b05-7b3188b2b81e swap
/dev/sda6 10804920-fc8a-4ba1-9e63-92f609212edf ext4
/dev/sr0 2016-04-20-22-29-52-00 iso9660 Ubuntu 16.04 LTS amd64
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Aug 29 19:28 ata-HL-DT-STDVD+_-RW_GT32N_KXKAAKE2707 -> ../../sr0
lrwxrwxrwx 1 root root 9 Aug 29 19:34 ata-WDC_WD1600BEVT-75A23T0_WD-WXB1AB098321 -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 29 19:34 ata-WDC_WD1600BEVT-75A23T0_WD-WXB1AB098321-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 29 19:34 ata-WDC_WD1600BEVT-75A23T0_WD-WXB1AB098321-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 29 19:34 ata-WDC_WD1600BEVT-75A23T0_WD-WXB1AB098321-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Aug 29 19:34 ata-WDC_WD1600BEVT-75A23T0_WD-WXB1AB098321-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 Aug 29 19:34 wwn-0x50014ee25a9aec3e -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 29 19:34 wwn-0x50014ee25a9aec3e-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 29 19:34 wwn-0x50014ee25a9aec3e-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 29 19:34 wwn-0x50014ee25a9aec3e-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Aug 29 19:34 wwn-0x50014ee25a9aec3e-part6 -> ../../sda6
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${initrdfail}" = 2 ]; then
set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
set next_entry="${prev_entry}"
set prev_entry=
save_env prev_entry
if [ "${next_entry}" ]; then
set initrdfail=2
fi
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function initrdfail {
if [ -n "${have_grubenv}" ]; then if [ -n "${partuuid}" ]; then
if [ -z "${initrdfail}" ]; then
set initrdfail=1
if [ -n "${boot_once}" ]; then
set prev_entry="${default}"
save_env prev_entry
fi
fi
save_env initrdfail
fi; fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bacb25af-e81a-48fa-93d8-02aba9edecb5
else
search --no-floppy --fs-uuid --set=root bacb25af-e81a-48fa-93d8-02aba9edecb5
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-bacb25af-e81a-48fa-93d8-02aba9edecb5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bacb25af-e81a-48fa-93d8-02aba9edecb5
else
search --no-floppy --fs-uuid --set=root bacb25af-e81a-48fa-93d8-02aba9edecb5
fi
linux /boot/vmlinuz-5.0.0-25-generic root=UUID=bacb25af-e81a-48fa-93d8-02aba9edecb5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-5.0.0-25-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-bacb25af-e81a-48fa-93d8-02aba9edecb5' {
menuentry 'Ubuntu, avec Linux 5.0.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-25-generic-advanced-bacb25af-e81a-48fa-93d8-02aba9edecb5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bacb25af-e81a-48fa-93d8-02aba9edecb5
else
search --no-floppy --fs-uuid --set=root bacb25af-e81a-48fa-93d8-02aba9edecb5
fi
echo 'Chargement de Linux 5.0.0-25-generic…'
linux /boot/vmlinuz-5.0.0-25-generic root=UUID=bacb25af-e81a-48fa-93d8-02aba9edecb5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-25-generic
}
menuentry 'Ubuntu, with Linux 5.0.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-25-generic-recovery-bacb25af-e81a-48fa-93d8-02aba9edecb5' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bacb25af-e81a-48fa-93d8-02aba9edecb5
else
search --no-floppy --fs-uuid --set=root bacb25af-e81a-48fa-93d8-02aba9edecb5
fi
echo 'Chargement de Linux 5.0.0-25-generic…'
linux /boot/vmlinuz-5.0.0-25-generic root=UUID=bacb25af-e81a-48fa-93d8-02aba9edecb5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-25-generic
}
menuentry 'Ubuntu, avec Linux 5.0.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-23-generic-advanced-bacb25af-e81a-48fa-93d8-02aba9edecb5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bacb25af-e81a-48fa-93d8-02aba9edecb5
else
search --no-floppy --fs-uuid --set=root bacb25af-e81a-48fa-93d8-02aba9edecb5
fi
echo 'Chargement de Linux 5.0.0-23-generic…'
linux /boot/vmlinuz-5.0.0-23-generic root=UUID=bacb25af-e81a-48fa-93d8-02aba9edecb5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-23-generic
}
menuentry 'Ubuntu, with Linux 5.0.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-23-generic-recovery-bacb25af-e81a-48fa-93d8-02aba9edecb5' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bacb25af-e81a-48fa-93d8-02aba9edecb5
else
search --no-floppy --fs-uuid --set=root bacb25af-e81a-48fa-93d8-02aba9edecb5
fi
echo 'Chargement de Linux 5.0.0-23-generic…'
linux /boot/vmlinuz-5.0.0-23-generic root=UUID=bacb25af-e81a-48fa-93d8-02aba9edecb5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-23-generic
}
menuentry 'Ubuntu, avec Linux 3.19.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-31-generic-advanced-bacb25af-e81a-48fa-93d8-02aba9edecb5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bacb25af-e81a-48fa-93d8-02aba9edecb5
else
search --no-floppy --fs-uuid --set=root bacb25af-e81a-48fa-93d8-02aba9edecb5
fi
echo 'Chargement de Linux 3.19.0-31-generic…'
linux /boot/vmlinuz-3.19.0-31-generic root=UUID=bacb25af-e81a-48fa-93d8-02aba9edecb5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-31-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-31-generic-recovery-bacb25af-e81a-48fa-93d8-02aba9edecb5' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bacb25af-e81a-48fa-93d8-02aba9edecb5
else
search --no-floppy --fs-uuid --set=root bacb25af-e81a-48fa-93d8-02aba9edecb5
fi
echo 'Chargement de Linux 3.19.0-31-generic…'
linux /boot/vmlinuz-3.19.0-31-generic root=UUID=bacb25af-e81a-48fa-93d8-02aba9edecb5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-31-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bacb25af-e81a-48fa-93d8-02aba9edecb5
else
search --no-floppy --fs-uuid --set=root bacb25af-e81a-48fa-93d8-02aba9edecb5
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bacb25af-e81a-48fa-93d8-02aba9edecb5
else
search --no-floppy --fs-uuid --set=root bacb25af-e81a-48fa-93d8-02aba9edecb5
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=bacb25af-e81a-48fa-93d8-02aba9edecb5 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda6 during installation
UUID=10804920-fc8a-4ba1-9e63-92f609212edf /home ext4 defaults 0 2
# swap was on /dev/sda5 during installation
UUID=cf031278-e0cc-4a24-8b05-7b3188b2b81e none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
18.250228882 = 19.596034048 boot/grub/grub.cfg 2
10.416908264 = 11.185070080 boot/grub/i386-pc/core.img 1
2.054161072 = 2.205638656 boot/vmlinuz-3.19.0-31-generic 1
25.563774109 = 27.448893440 boot/vmlinuz-5.0.0-23-generic 2
20.875972748 = 22.415405056 boot/vmlinuz-5.0.0-25-generic 2
20.875972748 = 22.415405056 vmlinuz 2
25.563774109 = 27.448893440 vmlinuz.old 2
26.965610504 = 28.954103808 boot/initrd.img-3.19.0-31-generic 1
26.858951569 = 28.839579648 boot/initrd.img-5.0.0-23-generic 4
21.271911621 = 22.840541184 boot/initrd.img-5.0.0-25-generic 2
21.271911621 = 22.840541184 initrd.img 2
26.858951569 = 28.839579648 initrd.img.old 4
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 9d 2e 43 db 17 bb 61 c0 e7 61 57 de bd 40 65 bb |..C...a..aW..@e.|
00000010 66 4e ea 50 77 a3 9d 4f 4b 84 38 f8 2f 64 4a 7a |fN.Pw..OK.8./dJz|
00000020 c5 e4 8c 14 61 84 ee 55 18 24 1a 4e e3 ed 06 12 |....a..U.$.N....|
00000030 b1 74 eb 20 df d9 92 82 d7 ef 00 8e ac 69 5c 9c |.t. .........i\.|
00000040 bb a6 bd ce ff 5c 7e 12 54 26 06 06 93 2b fa c0 |.....\~.T&...+..|
00000050 83 e9 5e 3c 4c 0c 07 e0 cb 9d 13 21 01 fc 76 e2 |..^<L......!..v.|
00000060 f3 97 98 02 0d 25 57 d5 1f 11 1e 28 6d c7 29 6b |.....%W....(m.)k|
00000070 8d 44 99 96 df 1a cb ff 73 5b 67 9f 27 27 01 44 |.D......s[g.''.D|
00000080 fa af 4f 1b 56 d1 95 fc 16 1d 9d 92 33 62 19 e9 |..O.V.......3b..|
00000090 c4 29 2a cb c4 c3 62 30 f5 d9 44 63 0d d8 cf 92 |.)*...b0..Dc....|
000000a0 93 8f 76 fe 63 3b 56 bc fa 50 45 fe 1c 9b eb 4e |..v.c;V..PE....N|
000000b0 71 3c 40 8c 62 cc 5d 03 7e 18 75 99 1d 5e 2a 0f |q<@.b.].~.u..^*.|
000000c0 2a 99 5b f7 14 61 fc aa 1f 60 e4 7b 36 e6 ae 6b |*.[..a...`.{6..k|
000000d0 95 7f 2d e8 cc f9 dc 8c 91 a6 f5 b5 1c 17 e1 bb |..-.............|
000000e0 6d 0f 73 0f 21 c6 e5 da f5 4b 47 57 03 d8 fa 76 |m.s.!....KGW...v|
000000f0 05 f2 96 01 84 06 c5 3f 09 d8 c7 c3 3f 89 1b b4 |.......?....?...|
00000100 37 41 3e a7 83 de 26 b0 69 49 9b 1e cc 9c a7 d2 |7A>...&.iI......|
00000110 72 8f a0 f8 42 0c 2e 77 f6 6d 94 7b 6a 27 a8 05 |r...B..w.m.{j'..|
00000120 25 08 f4 bc cd 07 87 ae f5 43 b4 98 71 d9 97 d0 |%........C..q...|
00000130 75 c0 76 09 64 2d 95 19 53 48 2a b8 43 51 bf 0c |u.v.d-..SH*.CQ..|
00000140 2f 55 1d c5 db 65 f7 aa e3 14 b0 1b 9b c2 21 3f |/U...e........!?|
00000150 32 f8 11 0d d7 c0 fe 1a dc b0 74 ae 33 e4 35 6d |2.........t.3.5m|
00000160 20 02 64 22 90 74 08 ef 7b 89 d4 3c 0b d1 60 fa | .d".t..{..<..`.|
00000170 e3 16 77 c4 8e 93 b9 f1 86 64 50 b7 b5 48 d5 1a |..w......dP..H..|
00000180 fb 4b 34 42 65 cc a9 1e 1f 8b 61 7a 7c 56 57 b7 |.K4Be.....az|VW.|
00000190 d3 d0 41 b7 b6 37 07 4b e4 10 df 52 d6 5d 32 02 |..A..7.K...R.]2.|
000001a0 cd 3e e8 27 3e 23 d1 3e 9d 6e 2e 55 ee 6c f7 4a |.>.'>#.>.n.U.l.J|
000001b0 34 46 d1 fa 6b 39 00 ac 2a e5 cb 9b a5 e4 00 fe |4F..k9..*.......|
000001c0 ff ff 82 fe ff ff 02 d0 a9 0e 00 a8 79 00 00 fe |............y...|
000001d0 ff ff 05 fe ff ff 01 00 00 00 01 d0 a9 0e 00 00 |................|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/6864/mounts) leaked on lvs invocation. Parent PID 13896: bash
File descriptor 63 (pipe:[59002]) leaked on lvs invocation. Parent PID 13896: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 20190829_1934 ===================
boot-info version : 4ppa66
boot-sav version : 4ppa66
boot-sav-extra version : 4ppa66
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 16.04 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --- maybe-ubiquity
ls: impossible d'accéder à '/home/usr/.config': Aucun fichier ou dossier de ce type
=================== os-prober:
/dev/sda1:Ubuntu 19.04 (19.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="bacb25af-e81a-48fa-93d8-02aba9edecb5" TYPE="ext4" PARTUUID="000a4743-01"
/dev/sda6: UUID="10804920-fc8a-4ba1-9e63-92f609212edf" TYPE="ext4" PARTUUID="000a4743-06"
/dev/sr0: UUID="2016-04-20-22-29-52-00" LABEL="Ubuntu 16.04 LTS amd64" TYPE="iso9660" PTUUID="0e0e8e70" PTTYPE="dos"
/dev/loop0: TYPE="squashfs"
/dev/sda5: UUID="cf031278-e0cc-4a24-8b05-7b3188b2b81e" TYPE="swap" PARTUUID="000a4743-05"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 août 9 08:48 grub.d
total 80
-rwxr-xr-x 1 root root 10627 févr. 5 2019 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 13718 mars 11 21:48 10_linux
-rwxr-xr-x 1 root root 11497 mars 11 21:48 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17 2018 30_os-prober
-rwxr-xr-x 1 root root 1418 oct. 14 2015 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 2014 40_custom
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
sda6 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda6.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:160GB:scsi:512:512:msdos:ATA WDC WD1600BEVT-7:;
1:1049kB:30.0GB:30.0GB:ext4::boot;
2:30.0GB:160GB:130GB:::;
6:30.0GB:156GB:126GB:ext4::;
5:156GB:160GB:4082MB:linux-swap(v1)::;
BYT;
/dev/sr0:1486MB:scsi:2048:2048:mac:HL-DT-ST DVD+-RW GT32N:;
1:2048B:6143B:4096B::Apple:;
2:1479MB:1481MB:2425kB::EFI:;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 149,1G
sda1 part ext4 28G
sda2 part 1K
sda5 part swap 3,8G
sda6 part ext4 117,3G
sr0 rom iso9660 1,4G Ubuntu 16.04 LTS amd64
loop0 loop squashfs 1,3G
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0
sda5 1 0 0 [SWAP]
sda6 1 0 0 /mnt/boot-sav/sda6
sr0 1 0 1 running /cdrom
loop0 1 1 0 /rofs
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1906136k,nr_inodes=476534,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=384160k,mode=755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd,nsroot=/)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids,nsroot=/)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio,nsroot=/)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices,nsroot=/)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct,nsroot=/)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer,nsroot=/)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio,nsroot=/)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event,nsroot=/)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb,nsroot=/)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory,nsroot=/)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,nsroot=/)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=384160k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime,data=ordered)
/dev/sda6 on /mnt/boot-sav/sda6 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd freefall full fuse fw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kmsg kvm lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 376M 6.2M 370M 2% /run
/dev/sr0 iso9660 1.4G 1.4G 0 100% /cdrom
/dev/loop0 squashfs 1.4G 1.4G 0 100% /rofs
/cow overlay 1.9G 140M 1.7G 8% /
tmpfs tmpfs 1.9G 344K 1.9G 1% /dev/shm
tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
tmpfs tmpfs 1.9G 296K 1.9G 1% /tmp
tmpfs tmpfs 376M 64K 376M 1% /run/user/999
/dev/sda1 ext4 28G 9.8G 17G 38% /mnt/boot-sav/sda1
/dev/sda6 ext4 116G 105G 5.4G 96% /mnt/boot-sav/sda6
=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/loop0: 1.3 GiB, 1433468928 bytes, 2799744 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 149.1 GiB, 160041885696 bytes, 312581808 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000a4743
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 58595797 58593750 28G 83 Linux
/dev/sda2 58597374 312580095 253982722 121.1G 5 Extended
/dev/sda5 304607232 312580095 7972864 3.8G 82 Linux swap / Solaris
/dev/sda6 58597376 304607231 246009856 117.3G 83 Linux
Partition table entries are not in disk order.
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== User settings
The settings chosen by the user will not act on the boot.
Dernière modification par Caribou22 (Le 30/08/2019, à 17:22)
Hors ligne
#21 Le 30/08/2019, à 17:39
- tomcg
Re : [Résolu] blocage au démarrage
avec ctrl+f2: le systeme me demande mon login+mot de passe
un message m'indique que 2 updates can be installed immediately
0 of these updates are security updates
je passe la commande sudo apt-get update et j'ai:
E: impossible d'obtenir le verrou /var/lib/apt/lists/lock - open (11:ressource temporairement non disponible)
E: impossible de verrouiller le répertoire /var/lib/apt/lists/
(j'avais pas branché le cable réseau, ooups)
je lance la commande upgrade: beaucoup de paquets ont été installés
ET ÇA FONCTIONNE
MERCI A VOUS DE VOTRE SUPPORT
Dernière modification par tomcg (Le 30/08/2019, à 17:51)
Ubuntu 20 04
ASUS A751SA-TY066T
Intel® Celeron(R) CPU N3050 @ 1.60GHz × 2
CG Intel® HD Graphics 400 (Braswell)
Hors ligne
#22 Le 30/08/2019, à 18:25
- Watts
Re : [Résolu] blocage au démarrage
Cette ligne:
/boot/grub/i386-pc/core.img
réfère à du 32 bits, qui rends les choses confuses
Acer Aspire X3990-Dual boot Windows 7 / Ubuntu 18.04
Hors ligne