#1 Le 10/10/2018, à 13:16
- abecidofugy
Freeze clic-souris dans VM Virtualbox (host Windows 8.1)
Salut,
Ce matin j’ai eu freeze du clic de la souris : impossible de cliquer dans l’interface, le clavier fonctionnait toujours et j'ai pu quitter la VM proprement via « la touche logo » puis TAB et touches flèches.
Host : Windows 8.1
Guest : KDE neon (je n'ai pas de souci avec Kubuntu)
Je suppute un souci matériel. Voici les commandes qui me viennent à l’esprit :
$ sudo ubuntu-drivers devices
== /sys/devices/pci0000:00/0000:00:02.0 ==
modalias : pci:v000080EEd0000BEEFsv00000000sd00000000bc03sc00i00
vendor : InnoTek Systemberatung GmbH
model : VirtualBox Graphics Adapter
driver : virtualbox-guest-x11 - distro non-free
driver : virtualbox-guest-x11-hwe - distro non-free
== /sys/devices/pci0000:00/0000:00:04.0 ==
modalias : pci:v000080EEd0000CAFEsv00000000sd00000000bc08sc80i00
vendor : InnoTek Systemberatung GmbH
model : VirtualBox Guest Service
manual_install: True
driver : virtualbox-guest-dkms - distro non-free
driver : virtualbox-guest-dkms-hwe - distro non-freeUne idée pour que ça ne se reproduise plus ?
Merci.
//EDIT : j'ai bien vérifié que la case est bel et bien cochée : https://www.youtube.com/watch?v=Xd1VKQnofIs (mais mon host est Windows 8.1)
Dernière modification par abecidofugy (Le 10/10/2018, à 14:16)
Hors ligne
#2 Le 10/10/2018, à 22:17
- Vobul
Re : Freeze clic-souris dans VM Virtualbox (host Windows 8.1)
Pas facile de débugger un truc avec Windows + Virtualbox…
dmesgest aussi une commande à regarder.
Vobul
Utilisez le retour utilisable de commandes !!!
J'aime la langue française, mais je parle franglais, deal with it.
RTFM
Hors ligne
#3 Le 02/04/2019, à 16:53
- abecidofugy
Re : Freeze clic-souris dans VM Virtualbox (host Windows 8.1)
Ça continue de me le faire bien souvent. Trop souvent… :\
desmg
zsh: correct 'desmg' to 'dmesg' [nyae]? y
[ 0.000000] Linux version 4.15.0-46-generic (buildd@lgw01-amd64-038) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #49-Ubuntu SMP Wed Feb 6 09:33:07 UTC 2019 (Ubuntu 4.15.0-46.49-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-46-generic root=UUID=bd208375-b2d2-42ba-8d2c-cad42e642b5f ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000196ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x197000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] MTRR: Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] e820: last_pfn = 0xdfff0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
[ 0.000000] BRK [0x1e13f000, 0x1e13ffff] PGTABLE
[ 0.000000] BRK [0x1e140000, 0x1e140fff] PGTABLE
[ 0.000000] BRK [0x1e141000, 0x1e141fff] PGTABLE
[ 0.000000] BRK [0x1e142000, 0x1e142fff] PGTABLE
[ 0.000000] BRK [0x1e143000, 0x1e143fff] PGTABLE
[ 0.000000] BRK [0x1e144000, 0x1e144fff] PGTABLE
[ 0.000000] BRK [0x1e145000, 0x1e145fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31177000-0x348b2fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 0x00000000DFFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 0x00000000DFFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 0x00000000DFFF0470 0022EA (v02 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 0x00000000DFFF0200 000040
[ 0.000000] ACPI: FACS 0x00000000DFFF0200 000040
[ 0.000000] ACPI: APIC 0x00000000DFFF0240 00005C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
[ 0.000000] ACPI: SSDT 0x00000000DFFF02A0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000196ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x196fd1000-0x196ffbfff]
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: No reference (HPET/PMTIMER) available
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000196ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dffeffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000196ffffff]
[ 0.000000] Reserved but unavailable: 114 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000196ffffff]
[ 0.000000] On node 0 totalpages: 1535886
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14272 pages used for memmap
[ 0.000000] DMA32 zone: 913392 pages, LIFO batch:31
[ 0.000000] Normal zone: 9664 pages used for memmap
[ 0.000000] Normal zone: 618496 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfff0000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfffbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u1048576
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1511865
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-46-generic root=UUID=bd208375-b2d2-42ba-8d2c-cad42e642b5f ro quiet splash
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5896128K/6143544K available (12300K kernel code, 2473K rwdata, 4252K rodata, 2408K init, 2416K bss, 247416K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39198 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.012000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.040000] tsc: Fast TSC calibration failed
[ 0.052000] tsc: Unable to calibrate against PIT
[ 0.052000] tsc: HPET/PMTIMER calibration failed
[ 0.052000] tsc: Marking TSC unstable due to could not calculate TSC khz
[ 0.052000] Calibrating delay loop... 7180.28 BogoMIPS (lpj=14360576)
[ 0.076000] pid_max: default: 32768 minimum: 301
[ 0.076000] Security Framework initialized
[ 0.076000] Yama: becoming mindful.
[ 0.076000] AppArmor: AppArmor initialized
[ 0.080000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.084000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.084000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.084000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.084000] mce: CPU supports 0 MCE banks
[ 0.084000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.084000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.084000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.084000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.084000] Speculative Store Bypass: Vulnerable
[ 0.084000] Freeing SMP alternatives memory: 36K
[ 0.088000] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.088000] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
[ 0.088000] Hierarchical SRCU implementation.
[ 0.088000] NMI watchdog: Perf event create on CPU 0 failed with -2
[ 0.088000] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.088000] smp: Bringing up secondary CPUs ...
[ 0.088000] x86: Booting SMP configuration:
[ 0.088000] .... node #0, CPUs: #1
[ 0.004000] mce: CPU supports 0 MCE banks
[ 0.112000] smp: Brought up 1 node, 2 CPUs
[ 0.112000] smpboot: Max logical packages: 1
[ 0.112000] smpboot: Total of 2 processors activated (13672.44 BogoMIPS)
[ 0.116000] devtmpfs: initialized
[ 0.116000] x86/mm: Memory block size: 128MB
[ 0.116000] evm: security.selinux
[ 0.116000] evm: security.SMACK64
[ 0.116000] evm: security.SMACK64EXEC
[ 0.116000] evm: security.SMACK64TRANSMUTE
[ 0.116000] evm: security.SMACK64MMAP
[ 0.116000] evm: security.apparmor
[ 0.116000] evm: security.ima
[ 0.116000] evm: security.capability
[ 0.116000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.116000] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.120000] pinctrl core: initialized pinctrl subsystem
[ 0.120000] RTC time: 15:39:19, date: 04/02/19
[ 0.120000] NET: Registered protocol family 16
[ 0.120000] audit: initializing netlink subsys (disabled)
[ 0.120000] audit: type=2000 audit(1554219559.120:1): state=initialized audit_enabled=0 res=1
[ 0.120000] cpuidle: using governor ladder
[ 0.120000] cpuidle: using governor menu
[ 0.120000] ACPI: bus type PCI registered
[ 0.120000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.120000] PCI: Using configuration type 1 for base access
[ 0.128000] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.128000] ACPI: Added _OSI(Module Device)
[ 0.128000] ACPI: Added _OSI(Processor Device)
[ 0.128000] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.128000] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.128000] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.128000] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.128000] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.132000] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.140000] ACPI: Interpreter enabled
[ 0.140000] ACPI: (supports S0 S5)
[ 0.140000] ACPI: Using IOAPIC for interrupt routing
[ 0.140000] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.140000] ACPI: Enabled 2 GPEs in block 00 to 07
[ 0.172000] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.172000] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.172000] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.172000] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.176000] PCI host bridge to bus 0000:00
[ 0.176000] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.176000] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.176000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.176000] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfdffffff window]
[ 0.176000] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.176000] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.188000] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.200000] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[ 0.208000] pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
[ 0.212000] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.212000] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.212000] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.212000] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.212000] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[ 0.220000] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.264000] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.268000] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
[ 0.276000] pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017]
[ 0.300000] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 0.304000] pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
[ 0.308000] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
[ 0.312000] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
[ 0.336000] pci 0000:00:05.0: [8086:2668] type 00 class 0x040300
[ 0.340000] pci 0000:00:05.0: reg 0x10: [mem 0xf0804000-0xf0807fff]
[ 0.372000] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[ 0.376000] pci 0000:00:06.0: reg 0x10: [mem 0xf0808000-0xf0808fff]
[ 0.404000] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 0.416000] pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
[ 0.416000] pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
[ 0.420000] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[ 0.424000] pci 0000:00:0d.0: reg 0x10: [io 0xd040-0xd047]
[ 0.428000] pci 0000:00:0d.0: reg 0x14: [io 0xd048-0xd04b]
[ 0.432000] pci 0000:00:0d.0: reg 0x18: [io 0xd050-0xd057]
[ 0.436000] pci 0000:00:0d.0: reg 0x1c: [io 0xd058-0xd05b]
[ 0.440000] pci 0000:00:0d.0: reg 0x20: [io 0xd060-0xd06f]
[ 0.444000] pci 0000:00:0d.0: reg 0x24: [mem 0xf080a000-0xf080bfff]
[ 0.464000] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[ 0.468000] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11)
[ 0.468000] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11)
[ 0.468000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11)
[ 0.468000] SCSI subsystem initialized
[ 0.472000] libata version 3.00 loaded.
[ 0.472000] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.472000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.472000] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.472000] vgaarb: loaded
[ 0.472000] ACPI: bus type USB registered
[ 0.472000] usbcore: registered new interface driver usbfs
[ 0.472000] usbcore: registered new interface driver hub
[ 0.472000] usbcore: registered new device driver usb
[ 0.472000] EDAC MC: Ver: 3.0.0
[ 0.476000] PCI: Using ACPI for IRQ routing
[ 0.476000] PCI: pci_cache_line_size set to 64 bytes
[ 0.480000] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.480000] e820: reserve RAM buffer [mem 0xdfff0000-0xdfffffff]
[ 0.480000] e820: reserve RAM buffer [mem 0x197000000-0x197ffffff]
[ 0.480000] NetLabel: Initializing
[ 0.480000] NetLabel: domain hash size = 128
[ 0.480000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.480000] NetLabel: unlabeled traffic allowed by default
[ 0.484000] clocksource: Switched to clocksource refined-jiffies
[ 0.528002] VFS: Disk quotas dquot_6.6.0
[ 0.528002] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.528002] AppArmor: AppArmor Filesystem Enabled
[ 0.528002] pnp: PnP ACPI init
[ 0.528002] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.528002] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.536003] pnp: PnP ACPI: found 2 devices
[ 0.584006] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.584006] clocksource: Switched to clocksource acpi_pm
[ 0.584006] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.584006] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.584006] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.584006] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfdffffff window]
[ 0.584006] NET: Registered protocol family 2
[ 0.584006] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.585121] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.585121] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.585983] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.585983] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.585983] NET: Registered protocol family 1
[ 0.585983] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.585983] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.587812] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.592304] PCI: CLS 0 bytes, default 64
[ 0.592304] Unpacking initramfs...
[ 1.352315] Freeing initrd memory: 56560K
[ 1.352315] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.352315] software IO TLB [mem 0xdbff0000-0xdfff0000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 1.352315] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.352315] Scanning for low memory corruption every 60 seconds
[ 1.356384] Initialise system trusted keyrings
[ 1.356384] Key type blacklist registered
[ 1.357918] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.360286] zbud: loaded
[ 1.360353] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.368247] fuse init (API version 7.26)
[ 1.455999] Key type asymmetric registered
[ 1.455999] Asymmetric key parser 'x509' registered
[ 1.455999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.455999] io scheduler noop registered
[ 1.455999] io scheduler deadline registered
[ 1.455999] io scheduler cfq registered (default)
[ 1.455999] intel_idle: Please enable MWAIT in BIOS SETUP
[ 1.460234] ACPI: AC Adapter [AC] (on-line)
[ 1.460234] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.460234] ACPI: Power Button [PWRF]
[ 1.460234] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 1.460234] ACPI: Sleep Button [SLPF]
[ 1.460234] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.488003] Linux agpgart interface v0.103
[ 1.500260] loop: module loaded
[ 1.504262] ata_piix 0000:00:01.1: version 2.13
[ 1.508260] scsi host0: ata_piix
[ 1.508260] scsi host1: ata_piix
[ 1.508260] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 1.508260] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 1.508260] libphy: Fixed MDIO Bus: probed
[ 1.508260] tun: Universal TUN/TAP device driver, 1.6
[ 1.508260] PPP generic driver version 2.4.2
[ 1.508260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.508260] ehci-pci: EHCI PCI platform driver
[ 1.508260] ehci-platform: EHCI generic platform driver
[ 1.508260] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.508260] ohci-pci: OHCI PCI platform driver
[ 1.512263] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 1.512263] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1
[ 1.512263] ohci-pci 0000:00:06.0: irq 22, io mem 0xf0808000
[ 1.568534] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.568534] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.568534] usb usb1: Product: OHCI PCI host controller
[ 1.568534] usb usb1: Manufacturer: Linux 4.15.0-46-generic ohci_hcd
[ 1.568534] usb usb1: SerialNumber: 0000:00:06.0
[ 1.568534] hub 1-0:1.0: USB hub found
[ 1.568534] hub 1-0:1.0: 12 ports detected
[ 1.572267] ohci-platform: OHCI generic platform driver
[ 1.572267] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.572267] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.580181] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.580181] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.580181] mousedev: PS/2 mouse device common for all mice
[ 1.580474] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.584422] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.584422] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 1.584422] i2c /dev entries driver
[ 1.584422] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 1.584422] device-mapper: uevent: version 1.0.3
[ 1.584422] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.587533] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.593060] NET: Registered protocol family 10
[ 1.609220] Segment Routing with IPv6
[ 1.609220] NET: Registered protocol family 17
[ 1.609963] Key type dns_resolver registered
[ 1.610761] RAS: Correctable Errors collector initialized.
[ 1.610761] registered taskstats version 1
[ 1.610761] Loading compiled-in X.509 certificates
[ 1.620259] Loaded X.509 cert 'Build time autogenerated kernel key: b873a790e41754b50f7dbae45b6bd46229c3c73f'
[ 1.620259] zswap: loaded using pool lzo/zbud
[ 1.640023] Key type big_key registered
[ 1.640023] Key type trusted registered
[ 1.652316] Key type encrypted registered
[ 1.652316] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.652316] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.652316] ima: Allocated hash algorithm: sha1
[ 1.652316] evm: HMAC attrs: 0x1
[ 1.652421] Magic number: 15:858:688
[ 1.652421] rtc_cmos rtc_cmos: setting system clock to 2019-04-02 15:39:21 UTC (1554219561)
[ 1.656382] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.656382] EDD information not available.
[ 1.668863] ata1.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.676942] ata1.00: configured for UDMA/33
[ 1.684241] scsi 0:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 1.687503] sr 0:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.687503] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.688278] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.688278] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.692220] Freeing unused kernel memory: 2408K
[ 1.714825] Write protecting the kernel read-only data: 20480k
[ 1.716363] Freeing unused kernel memory: 2008K
[ 1.720261] Freeing unused kernel memory: 1892K
[ 1.724273] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.724273] x86/mm: Checking user space page tables
[ 1.729059] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.960353] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.960353] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 2.004265] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 2.004265] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.028391] vboxvideo: loading out-of-tree module taints kernel.
[ 2.028391] vboxvideo: module verification failed: signature and/or required key missing - tainting kernel
[ 2.033170] usb 1-1: new full-speed USB device number 2 using ohci-pci
[ 2.308358] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 2.419554] usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
[ 2.419554] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.419554] usb 1-1: Product: USB Tablet
[ 2.419554] usb 1-1: Manufacturer: VirtualBox
[ 2.432373] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.457000] usbcore: registered new interface driver usbhid
[ 2.457000] usbhid: USB HID core driver
[ 2.460273] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input6
[ 2.468245] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 3.612949] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:90:50:5e
[ 3.612949] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.612949] piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
[ 3.616362] [drm] VRAM 08000000
[ 3.620307] [TTM] Zone kernel: Available graphics memory: 2979516 kiB
[ 3.620307] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.620307] [TTM] Initializing pool allocator
[ 3.620307] [TTM] Initializing DMA pool allocator
[ 3.624522] e1000 0000:00:03.0 enp0s3: renamed from eth0
[ 3.644505] fbcon: vboxdrmfb (fb0) is primary device
[ 3.644505] Console: switching to colour frame buffer device 100x37
[ 3.648351] vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device
[ 3.672382] [drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0
[ 3.672382] ahci 0000:00:0d.0: version 3.0
[ 3.672789] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
[ 3.676281] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 3.676281] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 3.678705] scsi host2: ahci
[ 3.678705] ata3: SATA max UDMA/133 abar m8192@0xf080a000 port 0xf080a100 irq 21
[ 4.103261] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.104016] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 4.104016] ata3.00: 125829120 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 4.104016] ata3.00: configured for UDMA/133
[ 4.104263] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 4.104263] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4.104263] sd 2:0:0:0: [sda] 125829120 512-byte logical blocks: (64.4 GB/60.0 GiB)
[ 4.104263] sd 2:0:0:0: [sda] Write Protect is off
[ 4.104263] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.104263] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.112192] sda: sda1
[ 4.112192] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.280767] random: fast init done
[ 4.443771] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.443771] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.443771] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 5.101832] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.476060] random: crng init done
[ 7.476060] random: 7 urandom warning(s) missed due to ratelimiting
[ 14.040678] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.562392] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 14.562392] systemd[1]: Detected virtualization oracle.
[ 14.584445] systemd[1]: Detected architecture x86-64.
[ 14.684500] systemd[1]: Set hostname to <neon>.
[ 22.064257] systemd[1]: Created slice System Slice.
[ 22.064257] systemd[1]: Reached target User and Group Name Lookups.
[ 22.064257] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 22.064257] systemd[1]: Listening on LVM2 poll daemon socket.
[ 22.064257] systemd[1]: Listening on udev Kernel Socket.
[ 22.064257] systemd[1]: Reached target Remote File Systems.
[ 22.068306] systemd[1]: Listening on Journal Socket (/dev/log).
[ 22.068306] systemd[1]: Listening on udev Control Socket.
[ 22.068306] systemd[1]: Reached target System Time Synchronized.
[ 22.068306] systemd[1]: Listening on Journal Socket.
[ 23.545099] lp: driver loaded but no devices found
[ 23.632244] ppdev: user-space parallel port driver
[ 23.776243] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 24.172157] systemd-journald[300]: Received request to flush runtime journal from PID 1
[ 26.360331] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
[ 35.632435] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
[ 35.632435] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input7
[ 35.632435] vboxguest: misc device minor 55, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[ 35.636534] vboxguest: Successfully loaded version 6.0.4 (interface 0x00010004)
[ 36.528377] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 10737418240 ms ovfl timer
[ 36.528377] RAPL PMU: hw unit of domain pp0-core 2^-0 Joules
[ 36.528377] RAPL PMU: hw unit of domain package 2^-0 Joules
[ 36.528377] RAPL PMU: hw unit of domain dram 2^-0 Joules
[ 36.528377] RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules
[ 39.760729] AVX2 version of gcm_enc/dec engaged.
[ 39.760729] AES CTR mode by8 optimization enabled
[ 49.048432] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9221 A1: line_outs=3 (0xc/0xf/0xb/0x0/0x0) type:speaker
[ 49.048432] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 49.048432] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 49.048432] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 49.048432] snd_hda_codec_idt hdaudioC0D0: dig-out=0x10/0x0
[ 49.048432] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 49.048432] snd_hda_codec_idt hdaudioC0D0: Mic=0xd
[ 49.048432] snd_hda_codec_idt hdaudioC0D0: Line=0xe
[ 49.048432] snd_hda_codec_idt hdaudioC0D0: CD=0x15
[ 49.048432] snd_hda_codec_idt hdaudioC0D0: dig-in=0x11
[ 49.220142] input: HDA Intel Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[ 49.224320] input: HDA Intel Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[ 49.224320] input: HDA Intel Speaker Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[ 49.228263] input: HDA Intel Speaker CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[ 49.228263] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[ 49.228320] input: HDA Intel SPDIF In as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
[ 50.878209] hrtimer: interrupt took 4490794 ns
[ 52.734855] audit: type=1400 audit(1554219612.575:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=529 comm="apparmor_parser"
[ 52.734855] audit: type=1400 audit(1554219612.575:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=529 comm="apparmor_parser"
[ 52.734855] audit: type=1400 audit(1554219612.575:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=529 comm="apparmor_parser"
[ 52.952097] audit: type=1400 audit(1554219612.791:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=525 comm="apparmor_parser"
[ 52.952097] audit: type=1400 audit(1554219612.791:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=525 comm="apparmor_parser"
[ 52.952097] audit: type=1400 audit(1554219612.791:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=525 comm="apparmor_parser"
[ 52.952097] audit: type=1400 audit(1554219612.791:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=525 comm="apparmor_parser"
[ 53.103967] audit: type=1400 audit(1554219612.939:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=530 comm="apparmor_parser"
[ 53.103967] audit: type=1400 audit(1554219612.943:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=531 comm="apparmor_parser"
[ 53.278819] audit: type=1400 audit(1554219613.119:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=533 comm="apparmor_parser"
[ 113.227424] snd_hda_intel 0000:00:05.0: Invalid position buffer, using LPIB read method instead.
[ 117.512282] IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
[ 117.524217] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 117.536525] IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
[ 117.536770] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
[ 119.500263] IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
[ 120.028394] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 120.028394] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
[ 127.256232] IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
[ 129.244406] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 129.244406] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
[ 147.844259] e1000 0000:00:03.0 enp0s3: Reset adapter
[ 147.864526] IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
[ 149.996298] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 150.000307] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
[ 160.460342] e1000 0000:00:03.0 enp0s3: Reset adapter
[ 160.484201] IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
[ 162.620410] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 162.620410] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
[ 171.906909] vboxsf: Successfully loaded version 6.0.4 (interface 0x00010004)
[ 176.222369] 15:42:16.066072 main VBoxService 6.0.4 r128413 (verbosity: 0) linux.amd64 (Jan 25 2019 19:35:06) release log
15:42:16.066116 main Log opened 2019-04-02T15:42:16.040429000Z
[ 176.222369] 15:42:16.066350 main OS Product: Linux
[ 176.222829] 15:42:16.067431 main OS Release: 4.15.0-46-generic
[ 176.222829] 15:42:16.067615 main OS Version: #49-Ubuntu SMP Wed Feb 6 09:33:07 UTC 2019
[ 176.222829] 15:42:16.067793 main Executable: /opt/VBoxGuestAdditions-6.0.4/sbin/VBoxService
15:42:16.067828 main Process ID: 1039
15:42:16.067862 main Package type: LINUX_64BITS_GENERIC
[ 176.222829] 15:42:16.070099 main 6.0.4 r128413 started. Verbose level = 0
[ 176.225559] 15:42:16.073028 main vbglR3GuestCtrlDetectPeekGetCancelSupport: Supported (#1)
[ 176.252242] 15:42:16.098678 automount vbsvcAutomounterMountIt: Successfully mounted 'D_DRIVE' on '/media/sf_D_DRIVE'
[ 176.260259] 15:42:16.105881 automount vbsvcAutomounterMountIt: Successfully mounted 'Passerelle' on '/media/sf_Passerelle'
[ 248.424297] IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
[ 250.430406] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 250.434875] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
[ 322.188404] snd_hda_intel 0000:00:05.0: Invalid position buffer, using LPIB read method instead.
[ 412.297877] kauditd_printk_skb: 16 callbacks suppressed
[ 412.297877] audit: type=1400 audit(1554219972.140:28): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/etc/mysql/mariadb.cnf" pid=1808 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 464.224284] IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
[ 466.204291] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 466.204291] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
[ 467.724292] e1000 0000:00:03.0 enp0s3: Reset adapter
[ 467.776353] IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
[ 469.884712] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 469.884712] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
[ 470.760357] e1000 0000:00:03.0 enp0s3: Reset adapter
[ 470.900304] e1000 0000:00:03.0 enp0s3: Reset adapter
[ 473.088277] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 473.900158] e1000 0000:00:03.0 enp0s3: Reset adapter
[ 474.056269] e1000 0000:00:03.0 enp0s3: Reset adapter
[ 476.220318] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 552.264358] IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
[ 554.204301] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 554.208375] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes readyUne idée ?
Hors ligne
#4 Le 05/06/2019, à 20:20
- abecidofugy
Re : Freeze clic-souris dans VM Virtualbox (host Windows 8.1)
Je suis tombé sur cette piste. J’ai fait : enable PAE/NX
Pour l'instant, pas de freeze depuis quelques jours déjà. On dirait que tout marche très bien à présent. Trop content. Je serre les pouces…
Hors ligne
#5 Le 06/06/2019, à 19:58
- abecidofugy
Re : Freeze clic-souris dans VM Virtualbox (host Windows 8.1)
Bon ben ça freeze encore…
Mes paramètres :
Host Windows 8.1, guest : KDE neon et Kubuntu
Hors ligne
#6 Le 24/09/2019, à 13:42
- coulox
Re : Freeze clic-souris dans VM Virtualbox (host Windows 8.1)
Bonjour,
Je rencontre le même problème avez vous résolue votre problème?
Hors ligne
#7 Le 24/09/2019, à 15:36
- abecidofugy
Re : Freeze clic-souris dans VM Virtualbox (host Windows 8.1)
coulox a écrit :
Bonjour,
Je rencontre le même problème avez vous résolue votre problème?
Ben, ça tient du miracle, mais dans ma VM KDE neon je n’utilise plus que Chromium en place de Firefox, et ça ne freeze beaucoup moins…
Dernière modification par abecidofugy (Le 24/09/2019, à 16:30)
Hors ligne
#8 Le 25/09/2019, à 10:29
- coulox
Re : Freeze clic-souris dans VM Virtualbox (host Windows 8.1)
Ok de mon coté je n'utilise pas de navigateur web et j'ai souvent des freeze sur la sourie, le clavier fonctionne bien.
Virtualbox 6.0.10 avec host en Windows 10
Hors ligne
#9 Le 12/10/2019, à 18:26
- abecidofugy
Re : Freeze clic-souris dans VM Virtualbox (host Windows 8.1)
Tu utilises des activités ? Hier, j’ai mis une activité seconde à mon panel, et je viens d’avoir un freeze total (même le clavier ne marchait plus). Soit ça vient des activités, soit de Firefox dont je me suis resservi sous ma VM… Je viens de rebasculer sur Chromium, je laisse l’actitvié 2 pour l’instant et je reviendrai te tenir au courant.
PS : mon host est à présent Windows 10 également.
Dernière modification par abecidofugy (Le 12/10/2019, à 19:20)
Hors ligne
#10 Le 20/10/2019, à 17:24
- abecidofugy
Re : Freeze clic-souris dans VM Virtualbox (host Windows 8.1)
@coulox : ce que j’ai fait en ce moment : j’ai activé la prise en charge de la 3D dans les réglages de ma VM, puis j’ai sélectionné OpenGL 2 dans les effets dans systemsetting. Pour l’instant ça tourne bien, et mon interface est plus agréable avec les effets Kwin. Pas de freeze depuis 1 semaine ou plus, sans reboot.
Hors ligne