#1 Le 14/10/2019, à 16:01
- Chamois
Erreur "end trace"/"end kernel panic" au démarrage
Bonjour,
j'ai installé Ubuntu sur mon PC portable (un Toshiba satellite C50) depuis trois mois. Tout allait très bien jusqu'à hier. En essayant de le rallumer, j'ai eu un message d'erreyr du type:
BusyBox vXXX
Enter 'help' for a list of built-in commands.
(initramfs)
J'ai parcouru les forums et je suis tombé sur ce sujet de discussion:
https://askubuntu.com/questions/137655/ … ts-busybox
J'ai rentré la commande suivante:
(initramfs) fsck /dev/sdaX -y
puis j'ai répondu "yes" à toutes les questions qui ont succédé sans vraiment chercher à comprendre ce qu'on me demandait.
Après un redémarrage j’obtiens l'erreur "end trace" ou "end kernel panic" et mon écran freeze comme ça:
J'ai essayé de lancer la version antérieure de Ubuntu installé sur mon PC en allant dans les options avancées, avec et sans le recovery mode mais j'obtiens un écran similaire:
Si certains ont des idées pour me débloquer de cette situation je suis preneur. Si la seule solution est de réinstaller Ubuntu, est-il au moins possible de récupérer mes données?
Merci d'avance!
Sur Toile Libre ou TDCT'Pix, choisir le lien « Insérer la miniature dans un forum : »
Dernière modification par cqfd93 (Le 14/10/2019, à 16:16)
Hors ligne
#2 Le 14/10/2019, à 17:25
- malbo
Re : Erreur "end trace"/"end kernel panic" au démarrage
Bonjour,
J'ai du mal à interpréter ce qu'on peut voir sur les deux photos. Je te prie de faire un Boot-Info et de donner l'URL de ce Boot-Info dans ta réponse.
EDIT : on peut voir quand même que ton ordi est un Toshiba Satellite C50-A-19U (caractéristiques visibles sur cette page)
Dernière modification par malbo (Le 14/10/2019, à 17:27)
Hors ligne
#3 Le 15/10/2019, à 12:49
- Chamois
Re : Erreur "end trace"/"end kernel panic" au démarrage
Salut Malbo,
Effectivement les photos sont de mauvaises qualité. Je ne connaissais pas cet outil "boot-info". J'ai suivi le tuto donc voici le lien du rapport:
http://paste.ubuntu.com/p/QSfMxngcC5/
Je ne sais pas comment l'analyser. Tu vois quelque-chose qui cloche?
Hors ligne
#4 Le 15/10/2019, à 14:19
- geole
Re : Erreur "end trace"/"end kernel panic" au démarrage
Bonjour
Tu devrais installer smarctl
sudo apt-get install --no-install-recommends smartmontools
et donner le retour de la commande
sudo smartcl -s on -a /dev/sda
Motif "error when loading shared library". Il est possible que la librairie ait disparu de façon logicielle ou ait été éliminée avec la commande fsck qui fait des réparations mauvaises qualité si le disque est en mauvais état
Dernière modification par geole (Le 15/10/2019, à 14:24)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#5 Le 15/10/2019, à 14:38
- malbo
Re : Erreur "end trace"/"end kernel panic" au démarrage
Ton Boot-Info est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.03 20171017............................................`M....2....0............A20 gate n
Boot sector info: Syslinux looks at sector 3854440 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 976,771,071 975,720,448 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 3.8 GiB, 4026531840 bytes, 7864320 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 56 7,864,319 7,864,264 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/sda1 390A-F945 vfat
/dev/sda2 d1da4ccb-c05c-473f-a6f6-814f5a097e7d ext4
/dev/sdb1 D2C6-F4E9 vfat
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Oct 15 10:40 ata-TOSHIBA_MQ01ABF050_9389C8O4T -> ../../sda
lrwxrwxrwx 1 root root 10 Oct 15 10:40 ata-TOSHIBA_MQ01ABF050_9389C8O4T-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct 15 10:40 ata-TOSHIBA_MQ01ABF050_9389C8O4T-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Oct 15 10:24 ata-TSSTcorp_CDDVDW_SU-208DB_R93W6YFD702VG3 -> ../../sr0
lrwxrwxrwx 1 root root 9 Oct 15 10:40 usb-General_USB_Flash_Disk_0337112100033813-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Oct 15 10:40 usb-General_USB_Flash_Disk_0337112100033813-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Oct 15 10:24 usb-Multiple_Card_Reader_058F63666485-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 9 Oct 15 10:40 wwn-0x5000039503702327 -> ../../sda
lrwxrwxrwx 1 root root 10 Oct 15 10:40 wwn-0x5000039503702327-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct 15 10:40 wwn-0x5000039503702327-part2 -> ../../sda2
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
========================== sda1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid d1da4ccb-c05c-473f-a6f6-814f5a097e7d root hd0,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d1da4ccb-c05c-473f-a6f6-814f5a097e7d
else
search --no-floppy --fs-uuid --set=root d1da4ccb-c05c-473f-a6f6-814f5a097e7d
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d1da4ccb-c05c-473f-a6f6-814f5a097e7d' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d1da4ccb-c05c-473f-a6f6-814f5a097e7d
else
search --no-floppy --fs-uuid --set=root d1da4ccb-c05c-473f-a6f6-814f5a097e7d
fi
linux /boot/vmlinuz-4.15.0-65-generic root=UUID=d1da4ccb-c05c-473f-a6f6-814f5a097e7d ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-65-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-d1da4ccb-c05c-473f-a6f6-814f5a097e7d' {
menuentry 'Ubuntu, avec Linux 4.15.0-65-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-65-generic-advanced-d1da4ccb-c05c-473f-a6f6-814f5a097e7d' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d1da4ccb-c05c-473f-a6f6-814f5a097e7d
else
search --no-floppy --fs-uuid --set=root d1da4ccb-c05c-473f-a6f6-814f5a097e7d
fi
echo 'Chargement de Linux 4.15.0-65-generic…'
linux /boot/vmlinuz-4.15.0-65-generic root=UUID=d1da4ccb-c05c-473f-a6f6-814f5a097e7d ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-65-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-65-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-65-generic-recovery-d1da4ccb-c05c-473f-a6f6-814f5a097e7d' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d1da4ccb-c05c-473f-a6f6-814f5a097e7d
else
search --no-floppy --fs-uuid --set=root d1da4ccb-c05c-473f-a6f6-814f5a097e7d
fi
echo 'Chargement de Linux 4.15.0-65-generic…'
linux /boot/vmlinuz-4.15.0-65-generic root=UUID=d1da4ccb-c05c-473f-a6f6-814f5a097e7d ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-65-generic
}
menuentry 'Ubuntu, avec Linux 4.15.0-64-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-64-generic-advanced-d1da4ccb-c05c-473f-a6f6-814f5a097e7d' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d1da4ccb-c05c-473f-a6f6-814f5a097e7d
else
search --no-floppy --fs-uuid --set=root d1da4ccb-c05c-473f-a6f6-814f5a097e7d
fi
echo 'Chargement de Linux 4.15.0-64-generic…'
linux /boot/vmlinuz-4.15.0-64-generic root=UUID=d1da4ccb-c05c-473f-a6f6-814f5a097e7d ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-64-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-64-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-64-generic-recovery-d1da4ccb-c05c-473f-a6f6-814f5a097e7d' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d1da4ccb-c05c-473f-a6f6-814f5a097e7d
else
search --no-floppy --fs-uuid --set=root d1da4ccb-c05c-473f-a6f6-814f5a097e7d
fi
echo 'Chargement de Linux 4.15.0-64-generic…'
linux /boot/vmlinuz-4.15.0-64-generic root=UUID=d1da4ccb-c05c-473f-a6f6-814f5a097e7d ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-64-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=d1da4ccb-c05c-473f-a6f6-814f5a097e7d / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=390A-F945 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
179.051765442 = 192.255369216 boot/grub/grub.cfg 3
3.516544342 = 3.775860736 boot/vmlinuz-4.15.0-64-generic 1
149.043914795 = 160.034684928 boot/vmlinuz-4.15.0-65-generic 2
149.043914795 = 160.034684928 vmlinuz 2
3.516544342 = 3.775860736 vmlinuz.old 1
151.277591705 = 162.433077248 boot/initrd.img-4.15.0-64-generic 4
151.374019623 = 162.536615936 boot/initrd.img-4.15.0-65-generic 2
151.374019623 = 162.536615936 initrd.img 2
151.277591705 = 162.433077248 initrd.img.old 4
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
set timeout=5
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash ---
label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash ---
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? ldlinux.c32 1
?? = ?? libcom32.c32 1
?? = ?? libutil.c32 1
?? = ?? menu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
ldlinux.c32 : not a COM32/COM32R module
libcom32.c32 : not a COM32/COM32R module
libutil.c32 : not a COM32/COM32R module
menu.c32 : not a COM32/COM32R module
========= Devices which don't seem to have a corresponding hard drive: =========
sdc
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/5532/mountinfo) leaked on lvs invocation. Parent PID 12900: bash
File descriptor 63 (pipe:[66433]) leaked on lvs invocation. Parent PID 12900: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 20191015_1040 ===================
boot-info version : 4ppa66
boot-sav version : 4ppa66
boot-sav-extra version : 4ppa66
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 18.04 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
ls: cannot access '/home/usr/.config': No such file or directory
=================== os-prober:
/dev/sda2:Ubuntu 18.04.3 LTS (18.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="390A-F945" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="4d37eb8a-6cda-48c3-9484-209591db9be1"
/dev/sda2: UUID="d1da4ccb-c05c-473f-a6f6-814f5a097e7d" TYPE="ext4" PARTUUID="f8d217ac-b328-4421-aa81-02462a89dd8b"
/dev/sdb1: UUID="D2C6-F4E9" TYPE="vfat" PARTUUID="c3072e18-01"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/fbx64.efi
=================== sda2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Aug 9 12:26 grub.d
total 80
-rwxr-xr-x 1 root root 10046 Mar 18 2019 00_header
-rwxr-xr-x 1 root root 6258 Mar 4 2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 Mar 4 2018 10_linux
-rwxr-xr-x 1 root root 11298 Mar 4 2018 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 Mar 4 2018 30_os-prober
-rwxr-xr-x 1 root root 1418 Mar 4 2018 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Mar 4 2018 40_custom
-rwxr-xr-x 1 root root 216 Mar 4 2018 41_custom
-rw-r--r-- 1 root root 483 Mar 4 2018 README
=================== sda2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=390A-F945 (sda1)
=================== sda2recordfail=1/grub/grubenv :
recordfail=1
/usr/share/boot-sav/bs-cmd_terminal.sh: line 179: warning: command substitution: ignored null byte in input
=================== efibootmgr -v
BootCurrent: 0004
Timeout: 0 seconds
BootOrder: 2001,0003,0002,2003,2002
Boot0000* EFI Network 0 for IPv6 (54-BE-F7-71-3A-48) PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(54bef7713a48,0)/IPv6([::]:<->[::]:,0,0)RC
Boot0001* EFI Network 0 for IPv4 (54-BE-F7-71-3A-48) PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(54bef7713a48,0)/IPv4(0.0.0.00.0.0.0,0,0)RC
Boot0002* Ubuntu HD(1,GPT,4d37eb8a-6cda-48c3-9484-209591db9be1,0x800,0x100000)/File(EFIubuntugrubx64.efi)RC
Boot0003* ubuntu HD(1,GPT,4d37eb8a-6cda-48c3-9484-209591db9be1,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0004* EFI USB Device (General USB Flash Disk) PciRoot(0x0)/Pci(0x1d,0x0)/USB(0,0)/USB(1,0)/HD(1,MBR,0xc3072e18,0x38,0x77ffc8)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, grubenv-ng grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda2.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:512:gpt:ATA TOSHIBA MQ01ABF0:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:500GB:500GB:ext4::;
BYT;
/dev/sdb:4027MB:scsi:512:512:msdos:General USB Flash Disk:;
1:28.7kB:4027MB:4027MB:fat32::boot, lba;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 1.7G
loop1 loop squashfs 86.6M
loop2 loop squashfs 140M
loop3 loop squashfs 1.6M
loop4 loop squashfs 12.2M
loop5 loop squashfs 21M
loop6 loop squashfs 3.3M
sda disk 465.8G
sda1 part vfat 512M
sda2 part ext4 465.3G
sdb disk 3.8G
sdb1 part vfat 3.8G
sr0 rom 1024M
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /rofs
loop1 1 1 0 /snap/core/4486
loop2 1 1 0 /snap/gnome-3-26-1604/59
loop3 1 1 0 /snap/gnome-calculator/154
loop4 1 1 0 /snap/gnome-characters/69
loop5 1 1 0 /snap/gnome-logs/25
loop6 1 1 0 /snap/gnome-system-monitor/36
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1934420k,nr_inodes=483605,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=391124k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=24,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14332)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=391120k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_4486.snap on /snap/core/4486 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_59.snap on /snap/gnome-3-26-1604/59 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_154.snap on /snap/gnome-calculator/154 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_69.snap on /snap/gnome-characters/69 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_25.snap on /snap/gnome-logs/25 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_36.snap on /snap/gnome-system-monitor/36 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill sda sda1 sda2 sdb sdb1 sdc sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout toshiba_acpi uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 00 04 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 45 f9 0a 39 4e 4f 20 4e 41 4d 45 20 20 |..)E..9NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 382M 1.6M 381M 1% /run
/dev/sdb1 vfat 3.8G 1.9G 2.0G 49% /cdrom
/dev/loop0 squashfs 1.8G 1.8G 0 100% /rofs
/cow overlay 1.9G 372M 1.6G 20% /
tmpfs tmpfs 1.9G 25M 1.9G 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
tmpfs tmpfs 1.9G 4.0K 1.9G 1% /tmp
tmpfs tmpfs 382M 56K 382M 1% /run/user/999
/dev/loop1 squashfs 87M 87M 0 100% /snap/core/4486
/dev/loop2 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/59
/dev/loop3 squashfs 1.7M 1.7M 0 100% /snap/gnome-calculator/154
/dev/loop4 squashfs 13M 13M 0 100% /snap/gnome-characters/69
/dev/loop5 squashfs 21M 21M 0 100% /snap/gnome-logs/25
/dev/loop6 squashfs 3.4M 3.4M 0 100% /snap/gnome-system-monitor/36
/dev/sda1 vfat 511M 6.1M 505M 2% /mnt/boot-sav/sda1
/dev/sda2 ext4 457G 36G 399G 9% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/loop0: 1.7 GiB, 1831378944 bytes, 3576912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 86.6 MiB, 90759168 bytes, 177264 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 140 MiB, 146841600 bytes, 286800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 1.6 MiB, 1691648 bytes, 3304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 12.2 MiB, 12804096 bytes, 25008 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 21 MiB, 22003712 bytes, 42976 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 3.3 MiB, 3411968 bytes, 6664 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: F5A7E213-928D-4CC3-8F9D-54AB77E3158D
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 976771071 975720448 465.3G Linux filesystem
Disk /dev/sdb: 3.8 GiB, 4026531840 bytes, 7864320 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xc3072e18
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 56 7864319 7864264 3.8G c W95 FAT32 (LBA)
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sda1/efi/.../grub*.efi file!
=================== User settings
The settings chosen by the user will not act on the boot.
Pour moi, tout ce qui est dans ce Boot-Info est correct.
Je signale que la première photo que tu as collée dans ton post #1 contient la mention "4.15.0-64" tandis que la deuxième photo contient la mention "4.15.0-65". J'en déduis que tu as interverti les deux images au moment de les coller dans ton post #1. Cela dit, je ne sais pas t'indiquer la moindre piste pour sortir de là. Peut-être que geole sera plus inspiré.
Dernière modification par malbo (Le 15/10/2019, à 14:38)
Hors ligne
#6 Le 15/10/2019, à 14:59
- geole
Re : Erreur "end trace"/"end kernel panic" au démarrage
Bonjour malbo
Si le disque est en mauvais état, je vais considérer que la cause est trouvée.
Si le disque est en bon état, comme la photo a été faite après le fck, je ne saurais pas si fsck est le responsable.
Je sais que dans un tel contexte, il est plus simple de réinstaller le maxima de logiciels.
je proposerais donc boot-repair avec l'option demandant la réinstallation totale du dernier noyau.
Paragraphe 2.4-E de https://doc.ubuntu-fr.org/boot-repair
en espérant que la librairie en question soit dedans sinon il faudra chercher où la trouver pour la réinstaller et s'il en manque encore une autre..... Autant réinstaller tout l'O.S.
Dernière modification par geole (Le 15/10/2019, à 15:01)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#7 Le 16/10/2019, à 16:36
- Chamois
Re : Erreur "end trace"/"end kernel panic" au démarrage
Finalement j'avais une clé bootable donc j'ai booté dessus, sauvegarder mes fichiers sur un disque dur externe et réinstaller Ubuntu de zéro. C'est peut-être pas très beau comme solution mais je n'avais pas envie d'y passer un temps infini et puis je n'avais pas beaucoup de données à copier donc 'est aller assez vite.
Merci pour votre aide et à bientôt!!
Hors ligne
#8 Le 16/10/2019, à 17:20
- xinu
Re : Erreur "end trace"/"end kernel panic" au démarrage
Bonjour,
et réinstaller Ubuntu de zéro
Par précaution, passe quand même les commandes données par geole au #4.
Asus PM8H61-MX USB3 Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz DDR3 8Go
Ubuntu 16.04 LTS - ESM 64 bits. Bureau Unity. Ubuntu 20.04 LTS 64 bits . Gnome 3.36.8
Hors ligne