#1 Le 13/12/2019, à 18:47
- Kristof21
/dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Bonjour,
Il m'est impossible de lancer Ubuntu depuis ce matin. J'ai le message suivant à la mise en route:
/dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
(i.e., without -a or -p options)
fsck exited with status code 4
The root filesystem on /dev/sda2 requires a manual fsck
Busybox v1.27.2 (Ubuntu 1:1.27.2-2ubuntu3.2) built in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)
Je ne peux malheureusement pas publier une copie d'écran, j'utilise un autre pc pour lancer cette discussion!
Si je comprends bien, sda2 contient un fichier système avec des erreurs, et cela pose problème!
J'ai tenté de créer une image .iso hier soir, et de la copier sur le bureau, peut-être que le problème vient de là? mais je ne sais pas comment le solutionner!!
Help!
Si tu le sens pas, tu le fais pas...
Hors ligne
#2 Le 13/12/2019, à 18:53
- lann
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
J'aurais essayer de lancer fsck via un live USB.
ça devrait te permettre de vérifier le disque qui pose problème
Hors ligne
#3 Le 13/12/2019, à 18:55
- geole
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Bonjour
Si hier, tu as arrêté de façon anormale ton ordinateur, le message est normal, tu peux alors faire la commande demandée
fsck -y /dev/sda2
Mais si l'arrêt de l'ordinateur, s'est fait sans problème, il est possible que la cause soit un problème disque. Pour le vérifier, il faut que tu bootes avec le support d'installation de ubuntu que tu installes le logiciel smartrmontools avec cette commande
sudo apt-get install --no-install-recommends smartmontools
et que tu publies le retour de cette commande
sudo smartctl -s on -a /dev/sda
Dernière modification par geole (Le 13/12/2019, à 18:55)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#4 Le 13/12/2019, à 19:05
- Kristof21
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
J'aurais essayer de lancer fsck via un live USB.
ça devrait te permettre de vérifier le disque qui pose problème
Bonjour Iann,
Je possède un live usb, mais version 14.04... j'avais fait la mise à jour en 18.04 par la suite. Et lorsque je boot dessus, il me propose de réinstaller!
Je précise que je ne suis pas un expert, et que j'utilise ubuntu seulement depuis 2 ans! j'aurais besoin d'être aiguillé...
Si tu le sens pas, tu le fais pas...
Hors ligne
#5 Le 13/12/2019, à 19:07
- Kristof21
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Bonjour geole,
comment rentrer dans la console pour écrire les lignes de commande... je n'arrive pas à lancer ubuntu !!!
Si tu le sens pas, tu le fais pas...
Hors ligne
#6 Le 13/12/2019, à 19:22
- Watts
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Bonjour,
Si ton pc se rallume (ou est toujours) sur cet écran, saisis simplement:
fsck -y /dev/sda2
puis pour redémarrer ton pc, fais
exit
ou (si ça ne fonctionne pas)
reboot
C'est un peu l'équivalent windows du pc qui se rallume en lançant chkdsk
Acer Aspire X3990-Dual boot Windows 7 / Ubuntu 18.04
Hors ligne
#7 Le 13/12/2019, à 19:31
- Kristof21
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Ok , j'ai réussi à lancer la commande de geole et Watts suivante :
fsck -y /dev/sda2
Après reboot, tout est rentré dans l'ordre!!!
Un grand merci à vous 3 pour votre aide précieuse !!
Bonnes fêtes !!
Si tu le sens pas, tu le fais pas...
Hors ligne
#8 Le 13/12/2019, à 19:40
- Watts
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Néanmoins le problème n'est pas forcément terminé, tu ne nous as pas dit si l'ordinateur s'était éteint correctement ou non, ce qui fait que le problème peut se reproduire ou cacher un autre problème
Acer Aspire X3990-Dual boot Windows 7 / Ubuntu 18.04
Hors ligne
#9 Le 13/12/2019, à 19:41
- geole
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Pour se rassurer
Installe
sudo apt-get install --no-install-recommends smartmontools
et publies le retour de cette commande
sudo smartctl -s on -a /dev/sda
et profite pour faire un support d'installation en version 18.04 http://releases.ubuntu.com/18.04.3/ubun … -amd64.iso
Dernière modification par geole (Le 13/12/2019, à 20:15)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#10 Le 13/12/2019, à 19:58
- Kristof21
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Aïe Aïe Aïe, vous aviez raison...! Mon DD stockant ma data n'apparaît plus ! seul le disque ssd hébergeant ubuntu apparaît !
Voilà le retour de la commande smartctl de geole:
christophe@christophe-MS-7996:~$ sudo smartctl -s on -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: KINGSTON SUV400S37120G
Serial Number: 50026B777700227D
LU WWN Device Id: 0 550380 440010000
Firmware Version: 0C3J96R9
User Capacity: 120034123776 bytes [120 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: M.2
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: Unknown(0x0ffe), ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Dec 13 18:52:19 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 5) minutes.
Conveyance self-test routine
recommended polling time: ( 0) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 48
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2066
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1478
100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1200032
101 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 195632
170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 92
175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0
176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0
177 Wear_Leveling_Count 0x0032 098 098 000 Old_age Always - 707
178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 670
183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 9
187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0
194 Temperature_Celsius 0x0022 032 100 000 Old_age Always - 32 (Min/Max 20/39)
195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0
201 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0
204 Soft_ECC_Correction 0x0032 100 100 000 Old_age Always - 0
231 Temperature_Celsius 0x0032 098 098 000 Old_age Always - 2
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 2044
234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1138
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 1734
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 2819
250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
christophe@christophe-MS-7996:~$
Si tu le sens pas, tu le fais pas...
Hors ligne
#11 Le 13/12/2019, à 20:05
- geole
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Ton disque dur étant certainement SDB, Donne le retour de ces commandes
cat /etc/fstab
dmesg | grep sdb
Je mémorise un truc qui, je l'espère, ne servira pas d'ici très longtemps.
sudo smartctl -s on -a /dev/sda
=== START OF INFORMATION SECTION ===
Device Model: KINGSTON SUV400S37120G
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2066
177 Wear_Leveling_Count 0x0032 098 098 000 Old_age Always - 707
178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 670
183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 9
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 2044
Dernière modification par geole (Le 13/12/2019, à 20:08)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#12 Le 13/12/2019, à 20:16
- Kristof21
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Voici:
christophe@christophe-MS-7996:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=fecd0c19-6b0e-4137-95d5-bc5291c52829 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=0F44-8EF6 /boot/efi vfat umask=0077 0 1
# swap was on /dev/sda3 during installation
UUID=208d6738-7639-4581-8c3d-dd7facce3712 none swap sw 0 0
christophe@christophe-MS-7996:~$
christophe@christophe-MS-7996:~$ dmesg | grep sdb
[ 3.127517] sd 4:0:0:0: [sdb] Attached SCSI removable disk
christophe@christophe-MS-7996:~$
christophe@christophe-MS-7996:~$ sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de christophe :
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: KINGSTON SUV400S37120G
Serial Number: 50026B777700227D
LU WWN Device Id: 0 550380 440010000
Firmware Version: 0C3J96R9
User Capacity: 120034123776 bytes [120 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: M.2
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: Unknown(0x0ffe), ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Dec 13 19:15:07 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 5) minutes.
Conveyance self-test routine
recommended polling time: ( 0) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 48
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2067
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1478
100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1200080
101 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 195632
170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 92
175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0
176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0
177 Wear_Leveling_Count 0x0032 098 098 000 Old_age Always - 707
178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 670
183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 9
187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0
194 Temperature_Celsius 0x0022 032 100 000 Old_age Always - 32 (Min/Max 20/39)
195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0
201 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0
204 Soft_ECC_Correction 0x0032 100 100 000 Old_age Always - 0
231 Temperature_Celsius 0x0032 098 098 000 Old_age Always - 2
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 2044
234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1138
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 1734
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 2819
250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
christophe@christophe-MS-7996:~$
Si tu le sens pas, tu le fais pas...
Hors ligne
#13 Le 13/12/2019, à 20:19
- Kristof21
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Je crains pour le DD, il fait un ronronnement inhabituel !
Si tu le sens pas, tu le fais pas...
Hors ligne
#14 Le 13/12/2019, à 20:19
- geole
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
sudo smartctl -s on -a /dev/sdb
Es-tu bien sur d'avoir copié ton ISO sur le bureau et pas sur le disque SDB qui n'a plus de table de partition?
Dernière modification par geole (Le 13/12/2019, à 20:20)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#15 Le 13/12/2019, à 20:29
- Kristof21
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Voici:
christophe@christophe-MS-7996:~$ sudo smartctl -s on -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdb: Unknown USB bridge [0x058f:0x6362 (0x126)]
Please specify device type with the -d option.
Use smartctl -h to get a usage summary
christophe@christophe-MS-7996:~$
L' iso était bien sur le bureau, et je l'avait aussi copié sur le DD. J'ai tout supprimé tout-à-l'heure. Pour le DD, j'ai l'impression qu'il tourne et s'arrête par intermittence...curieux
Si tu le sens pas, tu le fais pas...
Hors ligne
#16 Le 13/12/2019, à 20:40
- geole
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
C'est un disque USB qui n'est pas répertorié
Pourrais-tu indiquer sa référence commerciale?
J'y vais au hasard avec les cas les plus fréquents
sudo smartctl -s on -d ata -a /dev/sdb
sudo smartctl -s on -d sat -a /dev/sdb
sudo smartctl -s on -d scsi -a /dev/sdb
sudo smartctl -s on -d auto -T verypermissive -a /dev/sdb
sudo smartctl -s on -d test -T verypermissive -a /dev/sdb
Dernière modification par geole (Le 13/12/2019, à 20:45)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#17 Le 13/12/2019, à 20:47
- Kristof21
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Voici:
christophe@christophe-MS-7996:~$ sudo smartctl -s on -d ata -a /dev/sdb
[sudo] Mot de passe de christophe :
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: Invalid argument
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
christophe@christophe-MS-7996:~$
christophe@christophe-MS-7996:~$ sudo smartctl -s on -d sat -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
christophe@christophe-MS-7996:~$
christophe@christophe-MS-7996:~$ sudo smartctl -s on -d scsi -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: Generic
Product: USB SD Reader
Revision: 1.00
Device type: disk
Local Time is: Fri Dec 13 19:45:07 2019 CET
NO MEDIUM present in device
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
christophe@christophe-MS-7996:~$
christophe@christophe-MS-7996:~$ sudo smartctl -s on -d auto -T verypermissive -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdb: Unknown USB bridge [0x058f:0x6362 (0x126)]
Please specify device type with the -d option.
Use smartctl -h to get a usage summary
christophe@christophe-MS-7996:~$
christophe@christophe-MS-7996:~$ sudo smartctl -s on -d test -T verypermissive -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdb: Unknown USB bridge [0x058f:0x6362 (0x126)]
Please specify device type with the -d option.
Use smartctl -h to get a usage summary
christophe@christophe-MS-7996:~$
Si tu le sens pas, tu le fais pas...
Hors ligne
#18 Le 13/12/2019, à 20:51
- geole
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
sudo smartctl -s on -d scsi -T verypermissive -a /dev/sdb
J'ai vu cela USB SD Reader Est-ce un adaptateur? Une clé USB?
Dernière modification par geole (Le 13/12/2019, à 20:54)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#19 Le 13/12/2019, à 20:54
- Kristof21
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Je viens de lancer Gparted, j'ai actualisé les périphériques et Oh miracle, mon DD (sdf) apparaît à nouveau !!!
J'ai accès à toute ma data... Mais le DD fait toujours un bruit étrange, comme s'il s'arrêtait de tourner et se relançait aussitôt après!
Si tu le sens pas, tu le fais pas...
Hors ligne
#20 Le 13/12/2019, à 20:58
- geole
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
retente
sudo smartctl -s on -d scsi -T verypermissive -a /dev/sdf
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#21 Le 13/12/2019, à 20:58
- Kristof21
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Non, USB SD reader est un vieux lecteur de carte qui n'a jamais très bien fonctionné (surtout pour les cartes SD), je ne m'en sert que pour sa sortie USB.
christophe@christophe-MS-7996:~$ sudo smartctl -s on -d scsi -T verypermissive -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: Generic
Product: USB SD Reader
Revision: 1.00
Device type: disk
Local Time is: Fri Dec 13 19:55:23 2019 CET
NO MEDIUM present in device
SMART support is: Unavailable - device lacks SMART capability.
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
unable to fetch IEC (SMART) mode page [no medium present]
=== START OF READ SMART DATA SECTION ===
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C
Error Counter logging not supported
Device does not support Self Test logging
christophe@christophe-MS-7996:~$
Si tu le sens pas, tu le fais pas...
Hors ligne
#22 Le 13/12/2019, à 21:01
- Kristof21
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Voici :
christophe@christophe-MS-7996:~$ sudo smartctl -s on -d scsi -T verypermissive -a /dev/sdf
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
User Capacity: 500107862016 bytes [500 GB]
Logical block size: 512 bytes
LU is fully provisioned
Logical Unit id: 0x50014ee103761bc3
Serial number: WD-WCAV9J615512
Device type: disk
Local Time is: Fri Dec 13 19:58:56 2019 CET
SMART support is: Unavailable - device lacks SMART capability.
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
unable to fetch IEC (SMART) mode page [unsupported field in scsi command]
=== START OF READ SMART DATA SECTION ===
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C
Error Counter logging not supported
[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging
christophe@christophe-MS-7996:~$
Si tu le sens pas, tu le fais pas...
Hors ligne
#23 Le 13/12/2019, à 21:01
- geole
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
On reprend tout
dmesg | grep sdf
sudo smartctl -s on -a /dev/sdf
sudo smartctl -s on -d ata -a /dev/sdf
sudo smartctl -s on -d sat -a /dev/sdf
sudo smartctl -s on -d auto -T verypermissive -a /dev/sdf
sudo smartctl -s on -d test -T verypermissive -a /dev/sdf
Dernière modification par geole (Le 13/12/2019, à 21:04)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#24 Le 13/12/2019, à 21:07
- Kristof21
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
christophe@christophe-MS-7996:~$ dmesg | grep sdf
[ 3041.705958] sd 1:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3041.705966] sd 1:0:0:0: [sdf] Write Protect is off
[ 3041.705968] sd 1:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 3041.705979] sd 1:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3041.716161] sdf: sdf1
[ 3041.716398] sd 1:0:0:0: [sdf] Attached SCSI disk
[ 3058.308563] sdf: sdf1
[ 3170.735279] sd 1:0:0:0: [sdf] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 3170.735284] sd 1:0:0:0: [sdf] tag#3 Sense Key : Illegal Request [current]
[ 3170.735288] sd 1:0:0:0: [sdf] tag#3 Add. Sense: Unaligned write command
[ 3170.735294] sd 1:0:0:0: [sdf] tag#3 CDB: Read(10) 28 00 00 00 94 c0 00 00 08 00
[ 3170.735297] print_req_error: I/O error, dev sdf, sector 38080
[ 3170.746022] sd 1:0:0:0: [sdf] Synchronizing SCSI cache
[ 3170.746075] sd 1:0:0:0: [sdf] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3170.746078] sd 1:0:0:0: [sdf] Stopping disk
[ 3170.746091] sd 1:0:0:0: [sdf] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3177.196004] sd 1:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3177.196014] sd 1:0:0:0: [sdf] Write Protect is off
[ 3177.196017] sd 1:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 3177.196043] sd 1:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3177.217079] sdf: sdf1
[ 3177.217325] sd 1:0:0:0: [sdf] Attached SCSI disk
[ 3236.033843] sdf: sdf1
[ 3236.050874] sdf: sdf1
christophe@christophe-MS-7996:~$
christophe@christophe-MS-7996:~$ sudo smartctl -s on -a /dev/sdf
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green
Device Model: WDC WD5000AADS-00S9B0
Serial Number: WD-WCAV9J615512
LU WWN Device Id: 5 0014ee 103761bc3
Firmware Version: 01.00A01
User Capacity: 500107862016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Dec 13 20:04:04 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (10980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 129) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 199 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 238 186 021 Pre-fail Always - 1083
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2318
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2321
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2318
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 549
193 Load_Cycle_Count 0x0032 191 191 000 Old_age Always - 27843
194 Temperature_Celsius 0x0022 109 101 000 Old_age Always - 34
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 199 000 Old_age Always - 59
198 Offline_Uncorrectable 0x0030 200 199 000 Old_age Offline - 57
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 38
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
christophe@christophe-MS-7996:~$
christophe@christophe-MS-7996:~$ sudo smartctl -s on -d ata -a /dev/sdf
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green
Device Model: WDC WD5000AADS-00S9B0
Serial Number: WD-WCAV9J615512
LU WWN Device Id: 5 0014ee 103761bc3
Firmware Version: 01.00A01
User Capacity: 500107862016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Dec 13 20:04:33 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (10980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 129) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 199 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 238 186 021 Pre-fail Always - 1083
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2318
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2321
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2318
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 549
193 Load_Cycle_Count 0x0032 191 191 000 Old_age Always - 27843
194 Temperature_Celsius 0x0022 110 101 000 Old_age Always - 33
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 199 000 Old_age Always - 59
198 Offline_Uncorrectable 0x0030 200 199 000 Old_age Offline - 57
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 38
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
christophe@christophe-MS-7996:~$
christophe@christophe-MS-7996:~$
christophe@christophe-MS-7996:~$ sudo smartctl -s on -d scsi -a /dev/sdf
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
User Capacity: 500107862016 bytes [500 GB]
Logical block size: 512 bytes
LU is fully provisioned
Logical Unit id: 0x50014ee103761bc3
Serial number: WD-WCAV9J615512
Device type: disk
Local Time is: Fri Dec 13 20:05:08 2019 CET
SMART support is: Unavailable - device lacks SMART capability.
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
unable to fetch IEC (SMART) mode page [unsupported field in scsi command]
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
christophe@christophe-MS-7996:~$
christophe@christophe-MS-7996:~$ sudo smartctl -s on -d auto -T verypermissive -a /dev/sdf
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green
Device Model: WDC WD5000AADS-00S9B0
Serial Number: WD-WCAV9J615512
LU WWN Device Id: 5 0014ee 103761bc3
Firmware Version: 01.00A01
User Capacity: 500107862016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Dec 13 20:05:30 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (10980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 129) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 199 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 238 186 021 Pre-fail Always - 1083
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2319
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2321
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2319
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 550
193 Load_Cycle_Count 0x0032 191 191 000 Old_age Always - 27843
194 Temperature_Celsius 0x0022 109 101 000 Old_age Always - 34
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 199 000 Old_age Always - 59
198 Offline_Uncorrectable 0x0030 200 199 000 Old_age Offline - 57
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 38
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
christophe@christophe-MS-7996:~$
christophe@christophe-MS-7996:~$ sudo smartctl -s on -d test -T verypermissive -a /dev/sdf
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-72-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdf: Device of type 'scsi' [SCSI] detected
/dev/sdf [SAT]: Device open changed type from 'scsi' to 'sat'
/dev/sdf [SAT]: Device of type 'sat' [ATA] opened
christophe@christophe-MS-7996:~$
Si tu le sens pas, tu le fais pas...
Hors ligne
#25 Le 13/12/2019, à 21:14
- geole
Re : /dev/sda2/: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
Réponse rapide
Dans la trace
[ 3170.735297] print_req_error: I/O error, dev sdf, sector 38080
J'espère que tu as un autre disque pour dupliquer les fichiers qui sont dedans.
3 minutes et 15 secondes pour accrocher la partition. Cela devait correspondre au bruit que tu entendais
[ 3041.705958] sd 1:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/466 GiB)
.......
[ 3236.033843] sdf: sdf1
59 secteurs sont devenus illisibles . Aucun secteur illisible n'a été récupéré.
Cela peut faire potentiellement 59 fichiers impactés ou beaucoup plus si quelques secteurs sont utilisés pour faire des descriptions de fichiers.
Pourtant le disque n'est pas âgé.
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2321
197 Current_Pending_Sector 0x0032 200 199 000 Old_age Always - 59
J'ai vu le résultat d'une commande
/dev/sdf: Device of type 'scsi' [SCSI] detected
/dev/sdf [SAT]: Device open changed type from 'scsi' to 'sat'
/dev/sdf [SAT]: Device of type 'sat' [ATA] opened
Je ne pense pas que cela change grand chose.
Dernière modification par geole (Le 13/12/2019, à 21:33)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne