▶ Connexion de secours - partage de connexion avec un smartphone ◀

xubu1957 · Le 06/03/2018, à 17:49

Solution permettant de télécharger des pilotes pour le wi-fi, d’effectuer des mises à jour, etc

1) La solution la plus économique à privilégier est d'activer le wi-fi du smartphone et de connecter celui-ci à l'ordinateur au moyen du câble USB,
pour éviter la consommation du forfait de données du mobile.

Dans le menu « Partage de connexion », choisir l’option création de point d'accès Wi-fi et partage de connexion en Bluetooth.
(les menus peuvent varier selon l'OS du smartphone),

Une fois le smartphone connecté en USB et le partage par USB activé,une nouvelle connexion filaire apparaîtra dans les secondes suivantes avec un doux nom ésotérique
(exemple : «enp0s29u1u2 ») et un nom plus parlant « Connexion filaire 2 ».

Aucun paramétrage n’est à faire sur l'ordinateur, il suffit de choisir la nouvelle connexion filaire.

2) Si la connexion modem ↔ smartphone n'est pas possible en wi-fi, il reste la possibilité de se servir de la 3G/4G (et même là, on peut partager en USB).

Attention au forfait données !

Pour vous aider, un tutoriel > partager-connexion-3-4g-avec-son-smartphone

(les menus peuvent varier selon l'OS du smartphone)

==============

Duplicata du message #43 :

Le 21/08/2022, MicP a écrit :

Bonjour.
Partage de connexion Via USB :
1°/ le smartphone accède à internet, par wifi ou autre 3G 4G 5G etc., ça n'a aucune importance pourvu que l'on puisse accéder à internet depuis le smartphone.
2°/ le PC est allumé avec un système Linux qui est en cours de fonctionnement ou en train d'être installé (par exemple au moment du choix du langage à utiliser pour l'installation)
3°/ alors, on connecte le smartphone au PC par un cordon USB
4°/ et on voit sur le smartphone que la connexion du cordon USB au PC a été détectée
5°/ à ce moment là, sur le smartphone, aller dans Paramètres -> Partage de connexion -> Via USB
C'est tout ce qu'il faudra faire pour qu'un système Linux qui tourne sur le PC puisse accéder à internet en passant par le smartphone.
Aucun pilote à installer, il suffit que le PC soit démarré, par exemple avec un CD ou une carte SD ou une clef USB d'installation d'un système Linux, et l'installation du système pourra se faire,
Même méthode si un système Linux est déjà installé et en cours de fonctionnement, s'il était connecté à une box qui ne peut plus accéder à internet, il suffira de déconnecter la box du PC et utiliser la connexion du smartphone à internet.
On peut en même temps, appeler ou/et répondre aux appels téléphoniques, naviguer sur internet depuis le smartphone, etc.
et le smartphone en profite pour recharger sa batterie par USB

Dernière modification par xubu1957 (Le 22/08/2022, à 08:44)

youbugnetou · Le 15/12/2018, à 13:19

C'est une solution effectivement mais ça consomme pas mal, mieux vaut avoir un forfait avec pas mal de data pour le coup ! et surtout avoir une bonne connexion, parce que si tu ne captes pas bien, ça va être compliqué ^^

Henry de Monfreid · Le 22/01/2019, à 14:44

Salut.

youbugnetou a écrit :

C'est une solution effectivement mais ça consomme pas mal, mieux vaut avoir un forfait avec pas mal de data pour le coup !

La solution est d'avoir un téléphone double SIM, la première avec un forfait le moins cher possible pour son numéro principal. La seconde : un forfait en promo sans engagement utilisé pour les datas et les appels longue durée.

En ce moment, j'ai 3 SIM, 120 Go mensuels pour 5,98 €.

https://lebonforfait.fr/promos.html

krodelabestiole · Le 22/01/2019, à 15:41

moi je viens de découvrir qu'on pouvait accéder aux hotspots "freewifi_secure" avec le forfait de free à 2€ (intéressant vu qu'il est limité à 50Mo en 4G).
même s'il s'agit de wifi, l'identification / connexion se fait avec la carte sim donc ça marche que sur tel (à voir si on peut partager la connexion dans ce cas).

j'imagine que ça peut être utile en particulier pour les citadins ou ceux qui ont des voisins chez free (et désolé pour la pub).

krodelabestiole · Le 26/04/2019, à 19:00

krodelabestiole a écrit :

à voir si on peut partager la connexion dans ce cas

bon je pense pas ceci dit, ça correspondrait à mettre son tel en mode répéteur wifi avec changement de sécurité au passage, je pense pas qu'android soit capable de faire ça.

Henry de Monfreid · Le 26/04/2019, à 20:31

krodelabestiole a écrit :

moi je viens de découvrir qu'on pouvait accéder aux hotspots "freewifi_secure" avec le forfait de free à 2€ (intéressant vu qu'il est limité à 50Mo en 4G).
même s'il s'agit de wifi, l'identification / connexion se fait avec la carte sim donc ça marche que sur tel (à voir si on peut partager la connexion dans ce cas).
j'imagine que ça peut être utile en particulier pour les citadins ou ceux qui ont des voisins chez free (et désolé pour la pub).

J'ai vu ça, en revanche je n'ai jamais réussi à m'y connecter.

Attention, la bande passante est limitée, autour de 128 kbps/s.

MicP · Le 16/07/2019, à 08:39

krodelabestiole dans son message #4 a écrit :

moi je viens de découvrir qu'on pouvait accéder aux hotspots "freewifi_secure" avec le forfait de free à 2€ (intéressant vu qu'il est limité à 50Mo en 4G).
même s'il s'agit de wifi, l'identification / connexion se fait avec la carte sim donc ça marche que sur tel (à voir si on peut partager la connexion dans ce cas).
…

Oui, on peut, je le fais souvent,
partager (par USB vers un PC) la connexion au web
établie par un smartphone en WiFi vers un point d'accès "FreeWifi_Secure"

Sur le smartphone, pour se connecter au point d'accès "FreeWifi_Secure"
il suffit de choisir l’authentification EAP par la carte SIM (forfait Free 2€)

Il n'y a aucun mot de passe à donner puisque c'est la carte SIM qui est s'authentifie grâce au protocole EAP-SIM.
Avec ce protocole, votre smartphone pourra automatiquement accéder à internet en utilisant n'importe laquelle des box WiFi Free qui seraient accessibles dans le coin,
et le basculement de la connexion d'une box à une l'autre quand vous vous déplacez se fait automatiquement.

Dernière modification par MicP (Le 22/08/2022, à 09:35)

enidan · Le 16/12/2019, à 17:19

xubu1957 a écrit :

Solution permettant de télécharger des pilotes pour le wi-fi, d’effectuer des mises à jour, etc
1) La solution la plus économique à privilégier est d'activer le wi-fi du smartphone et de connecter celui-ci à l'ordinateur au moyen du câble USB,
pour éviter la consommation du forfait de données du mobile.
Dans le menu « Partage de connexion », choisir l’option création de point d'accès Wi-fi et partage de connexion en Bluetooth.
(les menus peuvent varier selon l'OS du smartphone),

Fantastique ! J'étais en train de tester le Lenovo IdeaPad S145, malheureusement pas de WIFI avec l'usb live de Lubuntu.
J'ai donc utilisé ta méthode avec mon smartphone samsung J3 sous android :
Aller dans paramètre > menu connexions > Point d'accès mobile et modem > Modem USB

Reconnu de suite, le wifi est ultra rapide, pas besoin d'acheter de clé. Un grand merci pour l'astuce.

xubu1957 · Le 16/12/2019, à 17:56

Bonsoir,

Je n'ai pas de smartphone, j'avais réuni trois réponses de cqfd93 > ./viewtopic.php?pid=21854816#p21854816

/!\ Aucune demande d’aide ne sera traitée dans ce fil, créez votre propre fil pour demander de l’aide. /!\

Dernière modification par xubu1957 (Le 18/05/2020, à 07:54)

enidan · Le 16/12/2019, à 18:12

Alors un grand merci à cqfd93 également

iznobe · Le 13/03/2022, à 09:20

NicoApi73 a écrit :

l'utilisation d'un smartphone est très simple : tu connectes ton smartphone à la WiFi, puis tu vas dans les paramètres de connexion pour faire un partage de connexion via USB. (il te faut bien sûr connecté le smartphone en USB à ta machine)

Bonjour , je suis desolé de te contredire , mais non , ce que tu dis ne fonctionnera pas .
Tu ne peux partager une connexion que lorsque c' est le smartphone qui l' a initiée , donc avec données mobiles activées et connectées .
impossible de partager une connexion recue via le wifi du smartphone ( a partir d' une box par exemple ) sur le port USB connecté a l' ordi .
Ou alors c' est tout nouveau et ne suis pas au courant .

Une fois la connexion 4G lancée sur le smartphone , on peut ensuite la partagée via le wifi du smartphone ou via le port USB et meme via le bluetooth sur certains modeles .

iznobe · Le 13/03/2022, à 10:12

Bonjour @xubu1957 , comme le dit @krodelabestiole dans son message #4 et #5 ( https://forum.ubuntu-fr.org/viewtopic.p … #p22088116 ) de la discussion dont tu as mis le lien , ca ne fonctionne pas .
A mon avis tu devrais editer le 1er message de cette meme discussion pour y supprimer ton 1°) .

krodelabestiole a écrit :

krodelabestiole a écrit :
à voir si on peut partager la connexion dans ce cas
bon je pense pas ceci dit, ça correspondrait à mettre son tel en mode répéteur wifi avec changement de sécurité au passage, je pense pas qu'android soit capable de faire ça.

De mon coté , je persiste , que seul le cas numero 2 peut fonctionner , celui que je viens d ' expliquer dans mon message #17 et krodelabestiole explique le pourquoi , certainement mieux que moi .

Dernière modification par iznobe (Le 13/03/2022, à 10:15)

xubu1957 · Le 13/03/2022, à 10:19

@iznobe

J'attendrais l'accord de cqfd93 pour modifier, la proposition de cette solution a été donnée de nombreuses fois sur le forum et est indiquée aussi au § 8, du [Tuto] Pas de Wi-fi ? Eléments importants à vérifier .

iznobe · Le 13/03/2022, à 10:25

Bien sur , pas de soucis .

Il me semble deja avoir dis dans plusieurs autres discussions que c' etait une erreur , on ne peut pas partager une connexion si elle n ' est pas initiée par le smartphone , et je n' ai jamais vu ( encore ) aucun cas sur le forum disant que cela fonctionnait .
Il y a par contre plein d' autre cas ou avec les données mobiles activées cela fonctionne bien sur .

EDIT :
Dans le doute , je viens de refaire a nouveau un test :
Smartphone xiaomi redminote 8 connecté en wifi a mon huawei B818-263 , impossible de partager la connexion via USB , via bluetooth , et evidemment via wifi puisqu ' il est deja utilisé . tout est grisé dans partage de connexion .

Dernière modification par iznobe (Le 13/03/2022, à 10:34)

Nuliel · Le 13/03/2022, à 11:00

Depuis quand le partage de connexion en usb ne fonctionne pas iznobe? Je l'ai déjà fait de nombreuses fois, la manip est simple et efficace. Et c'est pas nouveau... Pour le fait que tu ne puisses pas partager ta co, soit c'est lié à ta connexion 4G de ta box (vu le modèle j'imagine que c'est de la 4G que tu utilises), soit c'est ton téléphone mais je sais pas pourquoi.

Dernière modification par Nuliel (Le 13/03/2022, à 11:03)

iznobe · Le 13/03/2022, à 11:05

Bonjour @Nuliel , je n ' ai jamais dis que le partage de connexion smartphone en USB ne fonctionnait pas , relis mes messages precedents #19 .

J ' ai dis que le cas numero 1 de la discussion suivante https://forum.ubuntu-fr.org/viewtopic.php?id=2023275 ne fonctionnait pas , ce n' est d' ailleurs pas un partage de connexion justement !
Seul le cas numero 2 fonctionne , et @krodelabestiole , comme je l' ai cité dans mon message precedent , disait deja la meme chose que moi en 2019 voir message #5 de cette meme discussion .

Dernière modification par iznobe (Le 13/03/2022, à 11:07)

Nuliel · Le 13/03/2022, à 11:10

Ok, oui un téléphone ne peut pas faire hotspot wifi + se connecter en wifi (enfin certaines puces wifi le font, mais pas sûr qu'on retrouve ça dans des téléphones), la partie hotspot est effectivement pas utile, il faut se connecter en wifi à la box plutôt.

iznobe · Le 13/03/2022, à 11:11

cela dit , la derive actuelle est completement Hors sujet dans ce fil , desolé pour mon intervention a ce sujet , mais je suis obligé de signaler cette erreur , j ' aurais certainement du le faire plutot dans l' autre discussion .

EDIT :

Nuliel a écrit :

il faut se connecter en wifi à la box plutôt.

non , meme le tel connecté au wifi d' une box , ne pourra pas partager la connexion dont il n ' est pas a l' origine , il ne peut faire un partage que lorsque c ' est le telephone lui-meme qui est connecté a internet directement ( d ou le mot " initié " la connexion ) , pas en passant par une box qui elle etablit la connexion a internet .
Il faut donc utiliser la connexion du smartphone connecté en 4G avec un forfait data pour que cela fonctionne . cas numero 2 de la discussion de @xubu1957 .

Dernière modification par iznobe (Le 13/03/2022, à 11:18)

NicoApi73 · Le 13/03/2022, à 12:36

iznobe a écrit :

Bonjour , je suis desolé de te contredire , mais non , ce que tu dis ne fonctionnera pas .

Factuellement, Je le fais tout les jours, chez moi, pour éviter d'acheter une clé WiFi, sur un PC fixe qui n'a pas de carte WiFi et pour lequel c'est compliqué de laisser une connexion filaire permanente. J'utilise un smartphone qui n'a pas de carte SIM, donc pas de confusion possible avec les données mobiles.

EDIT : Pour être précis, le téléphone fait office de passerelle (de niveau 1 et 3), d'une part vers la WiFi, et d'autre part vers le réseau de la box (en partant de l'hypothèse que le réseau est celui de la box). Fais l'expérience et regarder les adresses IP des réseaux, tu verras que le réseau est bien créé par le smartphone, différent de celui de la box.

Dernière modification par NicoApi73 (Le 13/03/2022, à 12:42)

iznobe · Le 13/03/2022, à 12:38

Alors , peut etre que seul quelques modeles ont cette capacité , ca n' est pas le cas des 6 derniers que j' ai utilisé ces dernieres années en tout cas .

Aucun de mes telephones ne possedent la fonction de repeteur wifi .

Dernière modification par iznobe (Le 13/03/2022, à 12:44)

NicoApi73 · Le 13/03/2022, à 12:50

iznobe a écrit :

Aucun de mes telephones ne possedent la fonction de repeteur wifi .

Il n'est pas répéteur WiFi, il crée un réseau vers la machine en USB.

Je viens de le faire, je suis connecté de la sorte, le sous réseau créé par le téléphone est 192.168.42.0/24. Mon téléphone est sous Android 6 (Marshmallow).

EDIT : et là avec celui de mon épouse, sous Android 10 (le sous réseau est dans ce cas 192.168.213.0/24)

Dans les 2 cas, les données mobiles sont désactivées

EDIT2 : Il faut faire le partage de connexion en USB, ne pas choisir point d'accès WiFi...

Dernière modification par NicoApi73 (Le 13/03/2022, à 12:58)

iznobe · Le 14/03/2022, à 08:29

Bonjour , a la maison on a 5 telephones differents .
j ' ai deja testé plusieurs fois le cas numero 1 du 1er post indiqué dans cette discussion , mais toujours sans succés .
le cas numero 2 fonctionne correctement bien sur .

je n ' ai qu ' un telephone , dont l' ecran est fissuré et que je ne me sers plus ( il n' a pas de carte SIM donc ) sur lequel j ' arrive a connnecté le wifi a ma box et a partagé la connexion via USB une fois relié a l' ordinateur .

Si je coupe la connexion filaire de mon ordi via le switch de network-manager , je vois bien que le telephone est connecté , mais pourtant pas d' acces internet .

Dans mes tests precedents , j ' ai toujours eu le meme resultat et ca fait plus de 3 ans que j' essaie foule de solutions , bref , j ' ai toujours pensé que ca ne marchait pas pour la proposition 1.

voici ce que j' obtiens , avec le tel connecté par wifi / partage USB :

iznobe@iznobe-PC:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 2c:f0:5d:29:20:f2 brd ff:ff:ff:ff:ff:ff
3: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
    link/ether be:31:a8:82:c1:cb brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.100/24 brd 192.168.0.255 scope global noprefixroute usb0
       valid_lft forever preferred_lft forever
    inet6 fe80::a873:6894:5db4:b9c5/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
iznobe@iznobe-PC:~$ ping -c2 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
De 192.168.0.100 icmp_seq=1 Hôte de destination injoignable
De 192.168.0.100 icmp_seq=2 Hôte de destination injoignable

--- statistiques ping 8.8.8.8 ---
2 paquets transmis, 0 reçus, +2 erreurs, 100 % paquets perdus, temps 1001 ms

iznobe@iznobe-PC:~$

et lors qu ' il est connecté via filaire :

be@iznobe-PC:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 2c:f0:5d:29:20:f2 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.2/24 brd 192.168.1.255 scope global noprefixroute enp2s0
       valid_lft forever preferred_lft forever
    inet6 fd14:de39:6ae3:2400:2ef0:5dff:fe29:20f2/64 scope global dynamic mngtmpaddr 
       valid_lft 7194sec preferred_lft 3594sec
    inet6 fe80::2ef0:5dff:fe29:20f2/64 scope link 
       valid_lft forever preferred_lft forever
3: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
    link/ether be:31:a8:82:c1:cb brd ff:ff:ff:ff:ff:ff
iznobe@iznobe-PC:~$ ping -c2 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 octets de 8.8.8.8 : icmp_seq=1 ttl=114 temps=38.4 ms
64 octets de 8.8.8.8 : icmp_seq=2 ttl=114 temps=30.8 ms

--- statistiques ping 8.8.8.8 ---
2 paquets transmis, 2 reçus, 0 % paquets perdus, temps 1002 ms
rtt min/moy/max/mdev = 30,810/34,585/38,360/3,775 ms
iznobe@iznobe-PC:~$

On voit tres bien que l' ordi obtient une adresse ip valide : 192.168.1.100 .
Cependant aucun acces internet possible .

Dernière modification par iznobe (Le 14/03/2022, à 08:33)

xubu1957 · Le 14/03/2022, à 08:40

Bonjour,

Je n'ai pas de smartphone (je n'en veux pas, je l'avais refusé au boulot).

Je ne sais pas te répondre, et j'avais suggéré à notre Modération de transférer dans cette discussion, les échanges dans le fil de ssimpou.

Merci pour les transferts.

Dernière modification par xubu1957 (Le 14/03/2022, à 13:36)

iznobe · Le 14/03/2022, à 08:41

Bon , je viens de redemarrer l ' ordi en laissant le tel dessus , et refais les commandes precedentes , maintenant cela fonctionne mais curieusement :

iznobe@iznobe-PC:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 2c:f0:5d:29:20:f2 brd ff:ff:ff:ff:ff:ff
3: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
    link/ether ae:39:a6:60:88:1c brd ff:ff:ff:ff:ff:ff
    inet 192.168.42.194/24 brd 192.168.42.255 scope global dynamic noprefixroute usb0
       valid_lft 3480sec preferred_lft 3480sec
    inet6 fe80::51ee:c331:6c16:4859/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
iznobe@iznobe-PC:~$ ping -c2 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 octets de 8.8.8.8 : icmp_seq=1 ttl=113 temps=55.9 ms
64 octets de 8.8.8.8 : icmp_seq=2 ttl=113 temps=53.2 ms

--- statistiques ping 8.8.8.8 ---
2 paquets transmis, 2 reçus, 0 % paquets perdus, temps 1001 ms
rtt min/moy/max/mdev = 53,241/54,593/55,946/1,352 ms
iznobe@iznobe-PC:~$

j ' avoue ne plus y comprendre grand chose .
Comment mon ordi peut se retrouver dans un sous-reseau qui n' existe pas et maintenant l' acces internet est fonctionnel .

Meme l' acces a ma box via l' ip 192.168.1.1 est fonctionnel alors que dans un autre sous reseau ...

Bref , je suis pas expert en reseau , mais tout cela ne me semble pas tres clair , si quelqu ' un se sent de donner des explications a ce sujet , je l ' en remercie d' avance .
On remarquera du coup que ca n' est tout de meme ( en tout cas chez moi ) pas fonctionnel sans redemarrage de l' ordi et en y laissant le tel en partage dessus .

je joint ci-dessous le dmesg pour ( tenter ) d ' y voir clair:

iznobe@iznobe-PC:~$ sudo dmesg 
[sudo] Mot de passe de iznobe : 
[    0.000000] Linux version 5.13.0-35-generic (buildd@ubuntu) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #40~20.04.1-Ubuntu SMP Mon Mar 7 09:18:32 UTC 2022 (Ubuntu 5.13.0-35.40~20.04.1-generic 5.13.19)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.13.0-35-generic root=UUID=dca54497-1ab2-4c12-bc82-53b817300288 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: xstate_offset[9]:  960, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x21f, context size is 968 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040400000-0x000000006acb6fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006acb7000-0x000000006acb7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006acb8000-0x000000006acd8fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006acd9000-0x000000006acd9fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006acda000-0x000000006e59cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000006e59d000-0x000000006ed9cfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006ed9d000-0x000000006eeccfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000006eecd000-0x000000006f143fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006f144000-0x000000006fffdfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006fffe000-0x000000006fffefff] usable
[    0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000007d7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000008807fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x68366018-0x68373857] usable ==> usable
[    0.000000] e820: update [mem 0x68366018-0x68373857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000040400000-0x0000000068366017] usable
[    0.000000] reserve setup_data: [mem 0x0000000068366018-0x0000000068373857] usable
[    0.000000] reserve setup_data: [mem 0x0000000068373858-0x000000006acb6fff] usable
[    0.000000] reserve setup_data: [mem 0x000000006acb7000-0x000000006acb7fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000006acb8000-0x000000006acd8fff] usable
[    0.000000] reserve setup_data: [mem 0x000000006acd9000-0x000000006acd9fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000006acda000-0x000000006e59cfff] usable
[    0.000000] reserve setup_data: [mem 0x000000006e59d000-0x000000006ed9cfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000006ed9d000-0x000000006eeccfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000006eecd000-0x000000006f143fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000006f144000-0x000000006fffdfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000006fffe000-0x000000006fffefff] usable
[    0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000007d7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000008807fffff] usable
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi: ACPI=0x6f08a000 ACPI 2.0=0x6f08a014 TPMFinalLog=0x6f092000 SMBIOS=0x6fb5d000 SMBIOS 3.0=0x6fb5c000 MEMATTR=0x695f2018 ESRT=0x684cbf98 MOKvar=0x68579000 RNG=0x6fb77e98 TPMEventLog=0x68374018 
[    0.000000] efi: seeding entropy pool
[    0.000000] random: fast init done
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.2.0 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. MS-7C75/Z490-A PRO (MS-7C75), BIOS 2.C0 10/20/2021
[    0.000000] tsc: Detected 2900.000 MHz processor
[    0.000000] tsc: Detected 2899.886 MHz TSC
[    0.000340] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000343] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000349] last_pfn = 0x880800 max_arch_pfn = 0x400000000
[    0.000486] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001313] last_pfn = 0x6ffff max_arch_pfn = 0x400000000
[    0.014248] esrt: Reserving ESRT space from 0x00000000684cbf98 to 0x00000000684cbfd0.
[    0.014252] e820: update [mem 0x684cb000-0x684cbfff] usable ==> reserved
[    0.014265] e820: update [mem 0x68579000-0x68579fff] usable ==> reserved
[    0.014285] Using GB pages for direct mapping
[    0.014944] secureboot: Secure boot disabled
[    0.014945] RAMDISK: [mem 0x2279d000-0x2606afff]
[    0.014951] ACPI: Early table checksum verification disabled
[    0.014954] ACPI: RSDP 0x000000006F08A014 000024 (v02 ALASKA)
[    0.014958] ACPI: XSDT 0x000000006F089728 0000CC (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.014963] ACPI: FACP 0x000000006EEC6000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.014967] ACPI: DSDT 0x000000006EE7F000 046E47 (v02 ALASKA A M I    01072009 INTL 20160527)
[    0.014971] ACPI: FACS 0x000000006F143000 000040
[    0.014973] ACPI: MCFG 0x000000006EECA000 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.014976] ACPI: SSDT 0x000000006EEC7000 00203B (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.014979] ACPI: FIDT 0x000000006EE7E000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.014982] ACPI: SSDT 0x000000006EE7A000 0031F9 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.014985] ACPI: SSDT 0x000000006EE76000 003F6C (v02 Intel  PegSsdt  00001000 INTL 20160527)
[    0.014988] ACPI: HPET 0x000000006EECC000 000038 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.014991] ACPI: APIC 0x000000006EECB000 000164 (v04 ALASKA A M I    01072009 AMI  01000013)
[    0.014994] ACPI: SSDT 0x000000006EE74000 00147B (v02 ALASKA Ther_Rvp 00001000 INTL 20160527)
[    0.014997] ACPI: SSDT 0x000000006EE6F000 00461A (v02 INTEL  xh_cmsd4 00000000 INTL 20160527)
[    0.015000] ACPI: NHLT 0x000000006EE6D000 001821 (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.015003] ACPI: LPIT 0x000000006EE6C000 000094 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.015005] ACPI: SSDT 0x000000006EE68000 002720 (v02 ALASKA PtidDevc 00001000 INTL 20160527)
[    0.015008] ACPI: SSDT 0x000000006EE65000 0027EC (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
[    0.015011] ACPI: DBGP 0x000000006EE64000 000034 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.015014] ACPI: DBG2 0x000000006EE63000 000054 (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.015017] ACPI: SSDT 0x000000006EE61000 001B93 (v02 ALASKA UsbCTabl 00001000 INTL 20160527)
[    0.015020] ACPI: TPM2 0x000000006EE60000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.015022] ACPI: BGRT 0x000000006EE5F000 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.015025] ACPI: WSMT 0x000000006EE6B000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.015028] ACPI: FPDT 0x000000006EE5E000 000044 (v01 ALASKA CML      01072009 AMI  01000013)
[    0.015031] ACPI: Reserving FACP table memory at [mem 0x6eec6000-0x6eec6113]
[    0.015032] ACPI: Reserving DSDT table memory at [mem 0x6ee7f000-0x6eec5e46]
[    0.015033] ACPI: Reserving FACS table memory at [mem 0x6f143000-0x6f14303f]
[    0.015034] ACPI: Reserving MCFG table memory at [mem 0x6eeca000-0x6eeca03b]
[    0.015035] ACPI: Reserving SSDT table memory at [mem 0x6eec7000-0x6eec903a]
[    0.015036] ACPI: Reserving FIDT table memory at [mem 0x6ee7e000-0x6ee7e09b]
[    0.015037] ACPI: Reserving SSDT table memory at [mem 0x6ee7a000-0x6ee7d1f8]
[    0.015038] ACPI: Reserving SSDT table memory at [mem 0x6ee76000-0x6ee79f6b]
[    0.015039] ACPI: Reserving HPET table memory at [mem 0x6eecc000-0x6eecc037]
[    0.015040] ACPI: Reserving APIC table memory at [mem 0x6eecb000-0x6eecb163]
[    0.015041] ACPI: Reserving SSDT table memory at [mem 0x6ee74000-0x6ee7547a]
[    0.015042] ACPI: Reserving SSDT table memory at [mem 0x6ee6f000-0x6ee73619]
[    0.015043] ACPI: Reserving NHLT table memory at [mem 0x6ee6d000-0x6ee6e820]
[    0.015044] ACPI: Reserving LPIT table memory at [mem 0x6ee6c000-0x6ee6c093]
[    0.015045] ACPI: Reserving SSDT table memory at [mem 0x6ee68000-0x6ee6a71f]
[    0.015046] ACPI: Reserving SSDT table memory at [mem 0x6ee65000-0x6ee677eb]
[    0.015047] ACPI: Reserving DBGP table memory at [mem 0x6ee64000-0x6ee64033]
[    0.015048] ACPI: Reserving DBG2 table memory at [mem 0x6ee63000-0x6ee63053]
[    0.015049] ACPI: Reserving SSDT table memory at [mem 0x6ee61000-0x6ee62b92]
[    0.015050] ACPI: Reserving TPM2 table memory at [mem 0x6ee60000-0x6ee6004b]
[    0.015051] ACPI: Reserving BGRT table memory at [mem 0x6ee5f000-0x6ee5f037]
[    0.015052] ACPI: Reserving WSMT table memory at [mem 0x6ee6b000-0x6ee6b027]
[    0.015053] ACPI: Reserving FPDT table memory at [mem 0x6ee5e000-0x6ee5e043]
[    0.015069] ACPI: Local APIC address 0xfee00000
[    0.015363] No NUMA configuration found
[    0.015364] Faking a node at [mem 0x0000000000000000-0x00000008807fffff]
[    0.015374] NODE_DATA(0) allocated [mem 0x8807d6000-0x8807fffff]
[    0.015685] Zone ranges:
[    0.015685]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.015687]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.015689]   Normal   [mem 0x0000000100000000-0x00000008807fffff]
[    0.015690]   Device   empty
[    0.015691] Movable zone start for each node
[    0.015694] Early memory node ranges
[    0.015695]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.015696]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.015697]   node   0: [mem 0x0000000000100000-0x000000003fffffff]
[    0.015698]   node   0: [mem 0x0000000040400000-0x000000006acb6fff]
[    0.015699]   node   0: [mem 0x000000006acb8000-0x000000006acd8fff]
[    0.015700]   node   0: [mem 0x000000006acda000-0x000000006e59cfff]
[    0.015701]   node   0: [mem 0x000000006fffe000-0x000000006fffefff]
[    0.015701]   node   0: [mem 0x0000000100000000-0x00000008807fffff]
[    0.015705] Initmem setup node 0 [mem 0x0000000000001000-0x00000008807fffff]
[    0.015706] On node 0 totalpages: 8317242
[    0.015708]   DMA zone: 64 pages used for memmap
[    0.015709]   DMA zone: 158 pages reserved
[    0.015709]   DMA zone: 3998 pages, LIFO batch:0
[    0.015711]   DMA32 zone: 6983 pages used for memmap
[    0.015711]   DMA32 zone: 446876 pages, LIFO batch:63
[    0.015712]   Normal zone: 122912 pages used for memmap
[    0.015713]   Normal zone: 7866368 pages, LIFO batch:63
[    0.015718] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.015720] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.015741] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.017900] On node 0, zone DMA32: 1024 pages in unavailable ranges
[    0.017902] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.017975] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.018037] On node 0, zone DMA32: 6753 pages in unavailable ranges
[    0.057337] On node 0, zone Normal: 1 pages in unavailable ranges
[    0.057623] On node 0, zone Normal: 30720 pages in unavailable ranges
[    0.057637] Reserving Intel graphics memory at [mem 0x79800000-0x7d7fffff]
[    0.057885] ACPI: PM-Timer IO Port: 0x1808
[    0.057887] ACPI: Local APIC address 0xfee00000
[    0.057893] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.057895] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.057896] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.057897] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.057898] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.057899] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.057900] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.057900] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.057901] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.057902] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.057903] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.057903] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.057904] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.057905] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.057906] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.057907] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.057907] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.057908] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.057909] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.057910] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.057949] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.057952] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.057954] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.057956] ACPI: IRQ0 used by override.
[    0.057957] ACPI: IRQ9 used by override.
[    0.057958] Using ACPI (MADT) for SMP configuration information
[    0.057959] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.057966] e820: update [mem 0x6842b000-0x68487fff] usable ==> reserved
[    0.057975] TSC deadline timer available
[    0.057976] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[    0.058001] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.058004] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.058006] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.058008] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x403fffff]
[    0.058010] PM: hibernation: Registered nosave memory: [mem 0x68366000-0x68366fff]
[    0.058012] PM: hibernation: Registered nosave memory: [mem 0x68373000-0x68373fff]
[    0.058014] PM: hibernation: Registered nosave memory: [mem 0x6842b000-0x68487fff]
[    0.058016] PM: hibernation: Registered nosave memory: [mem 0x684cb000-0x684cbfff]
[    0.058017] PM: hibernation: Registered nosave memory: [mem 0x68579000-0x68579fff]
[    0.058019] PM: hibernation: Registered nosave memory: [mem 0x6acb7000-0x6acb7fff]
[    0.058021] PM: hibernation: Registered nosave memory: [mem 0x6acd9000-0x6acd9fff]
[    0.058023] PM: hibernation: Registered nosave memory: [mem 0x6e59d000-0x6ed9cfff]
[    0.058024] PM: hibernation: Registered nosave memory: [mem 0x6ed9d000-0x6eeccfff]
[    0.058025] PM: hibernation: Registered nosave memory: [mem 0x6eecd000-0x6f143fff]
[    0.058026] PM: hibernation: Registered nosave memory: [mem 0x6f144000-0x6fffdfff]
[    0.058028] PM: hibernation: Registered nosave memory: [mem 0x6ffff000-0x7d7fffff]
[    0.058028] PM: hibernation: Registered nosave memory: [mem 0x7d800000-0xdfffffff]
[    0.058029] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.058030] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.058031] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.058031] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.058032] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.058033] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.058034] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.058034] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.058035] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.058036] [mem 0x7d800000-0xdfffffff] available for PCI devices
[    0.058038] Booting paravirtualized kernel on bare hardware
[    0.058039] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.058046] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.058616] percpu: Embedded 65 pages/cpu s229376 r8192 d28672 u524288
[    0.058625] pcpu-alloc: s229376 r8192 d28672 u524288 alloc=1*2097152
[    0.058627] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 
[    0.058633] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 
[    0.058667] Built 1 zonelists, mobility grouping on.  Total pages: 8187125
[    0.058668] Policy zone: Normal
[    0.058670] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.13.0-35-generic root=UUID=dca54497-1ab2-4c12-bc82-53b817300288 ro quiet splash vt.handoff=7
[    0.060391] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.061210] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.061346] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.114930] Memory: 32467976K/33268968K available (16393K kernel code, 3512K rwdata, 10492K rodata, 2904K init, 5724K bss, 800732K reserved, 0K cma-reserved)
[    0.114935] random: get_random_u64 called from __kmem_cache_create+0x2d/0x440 with crng_init=1
[    0.115050] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.115060] ftrace: allocating 49241 entries in 193 pages
[    0.130530] ftrace: allocated 193 pages with 3 groups
[    0.130631] rcu: Hierarchical RCU implementation.
[    0.130632] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[    0.130634] 	Rude variant of Tasks RCU enabled.
[    0.130634] 	Tracing variant of Tasks RCU enabled.
[    0.130635] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.130636] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.134435] NR_IRQS: 524544, nr_irqs: 2184, preallocated irqs: 16
[    0.134857] random: crng done (trusting CPU's manufacturer)
[    0.134880] vt handoff: transparent VT on vt#7
[    0.134886] Console: colour dummy device 80x25
[    0.134904] printk: console [tty0] enabled
[    0.134919] ACPI: Core revision 20210331
[    0.135312] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.135401] APIC: Switch to symmetric I/O mode setup
[    0.136907] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.137186] Switched APIC routing to physical flat.
[    0.142324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.159401] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[    0.159406] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544)
[    0.159409] pid_max: default: 32768 minimum: 301
[    0.161433] LSM: Security Framework initializing
[    0.161442] Yama: becoming mindful.
[    0.161462] AppArmor: AppArmor initialized
[    0.161521] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.161560] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.161777] CPU0: Thermal monitoring enabled (TM1)
[    0.161815] process: using mwait in idle threads
[    0.161817] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.161818] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.161821] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.161822] Spectre V2 : Mitigation: Enhanced IBRS
[    0.161823] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.161824] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.161825] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.167125] Freeing SMP alternatives memory: 40K
[    0.167425] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1659
[    0.167443] smpboot: CPU0: Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz (family: 0x6, model: 0xa5, stepping: 0x5)
[    0.167550] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.167559] ... version:                4
[    0.167560] ... bit width:              48
[    0.167560] ... generic registers:      4
[    0.167561] ... value mask:             0000ffffffffffff
[    0.167562] ... max period:             00007fffffffffff
[    0.167563] ... fixed-purpose events:   3
[    0.167563] ... event mask:             000000070000000f
[    0.167642] rcu: Hierarchical SRCU implementation.
[    0.168527] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.168637] smp: Bringing up secondary CPUs ...
[    0.168702] x86: Booting SMP configuration:
[    0.168702] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.188812] smp: Brought up 1 node, 16 CPUs
[    0.188812] smpboot: Max logical packages: 1
[    0.188812] smpboot: Total of 16 processors activated (92796.35 BogoMIPS)
[    0.192223] devtmpfs: initialized
[    0.192223] x86/mm: Memory block size: 128MB
[    0.193073] PM: Registering ACPI NVS region [mem 0x6acb7000-0x6acb7fff] (4096 bytes)
[    0.193073] PM: Registering ACPI NVS region [mem 0x6eecd000-0x6f143fff] (2584576 bytes)
[    0.193073] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.193073] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.193073] pinctrl core: initialized pinctrl subsystem
[    0.193073] PM: RTC time: 07:35:46, date: 2022-03-14
[    0.193073] NET: Registered protocol family 16
[    0.193073] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.193073] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.193073] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.193073] audit: initializing netlink subsys (disabled)
[    0.193073] audit: type=2000 audit(1647243346.056:1): state=initialized audit_enabled=0 res=1
[    0.193073] thermal_sys: Registered thermal governor 'fair_share'
[    0.193073] thermal_sys: Registered thermal governor 'bang_bang'
[    0.193073] thermal_sys: Registered thermal governor 'step_wise'
[    0.193073] thermal_sys: Registered thermal governor 'user_space'
[    0.193073] thermal_sys: Registered thermal governor 'power_allocator'
[    0.195413] EISA bus registered
[    0.195420] cpuidle: using governor ladder
[    0.195423] cpuidle: using governor menu
[    0.195447] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.195447] ACPI: bus type PCI registered
[    0.195447] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.195500] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.195503] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.195516] PCI: Using configuration type 1 for base access
[    0.197093] Kprobes globally optimized
[    0.197097] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.197097] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.197097] ACPI: Added _OSI(Module Device)
[    0.197097] ACPI: Added _OSI(Processor Device)
[    0.197097] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.197097] ACPI: Added _OSI(Processor Aggregator Device)
[    0.197097] ACPI: Added _OSI(Linux-Dell-Video)
[    0.197097] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.197097] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.282431] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.289108] ACPI: Dynamic OEM Table Load:
[    0.289117] ACPI: SSDT 0xFFFF8C3481905B00 0000FC (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.290143] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.291928] ACPI: Dynamic OEM Table Load:
[    0.291936] ACPI: SSDT 0xFFFF8C34810AC000 000444 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.293116] ACPI: Dynamic OEM Table Load:
[    0.293122] ACPI: SSDT 0xFFFF8C34810A9000 0005E4 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.294407] ACPI: Dynamic OEM Table Load:
[    0.294413] ACPI: SSDT 0xFFFF8C348138A200 0001B2 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.295544] ACPI: Dynamic OEM Table Load:
[    0.295552] ACPI: SSDT 0xFFFF8C3481914000 000BEA (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.296889] ACPI: Dynamic OEM Table Load:
[    0.296895] ACPI: SSDT 0xFFFF8C348190F800 000778 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.298211] ACPI: Dynamic OEM Table Load:
[    0.298216] ACPI: SSDT 0xFFFF8C348114F800 0003D7 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.299522] ACPI: Dynamic OEM Table Load:
[    0.299530] ACPI: SSDT 0xFFFF8C3481913000 000D22 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.301617] ACPI: Dynamic OEM Table Load:
[    0.301623] ACPI: SSDT 0xFFFF8C3481149C00 0003CA (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.311154] ACPI: Interpreter enabled
[    0.311196] ACPI: (supports S0 S3 S4 S5)
[    0.311197] ACPI: Using IOAPIC for interrupt routing
[    0.311237] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.312531] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.313365] ACPI: PM: Power Resource [PG02] (on)
[    0.313924] ACPI: PM: Power Resource [PG03] (on)
[    0.327709] ACPI: PM: Power Resource [USBC] (off)
[    0.330702] ACPI: PM: Power Resource [V0PR] (on)
[    0.330943] ACPI: PM: Power Resource [V1PR] (on)
[    0.331174] ACPI: PM: Power Resource [V2PR] (on)
[    0.334918] ACPI: PM: Power Resource [WRST] (on)
[    0.339086] ACPI: PM: Power Resource [FN00] (off)
[    0.339183] ACPI: PM: Power Resource [FN01] (off)
[    0.339275] ACPI: PM: Power Resource [FN02] (off)
[    0.339367] ACPI: PM: Power Resource [FN03] (off)
[    0.339463] ACPI: PM: Power Resource [FN04] (off)
[    0.339968] ACPI: PM: Power Resource [PIN] (off)
[    0.340486] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.340494] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.340740] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[    0.340976] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[    0.340977] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.342072] PCI host bridge to bus 0000:00
[    0.342075] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.342077] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.342079] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.342080] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.342081] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.342082] pci_bus 0000:00: root bus resource [mem 0x7d800000-0xdfffffff window]
[    0.342083] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.342084] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.342103] pci 0000:00:00.0: [8086:9b43] type 00 class 0x060000
[    0.342342] pci 0000:00:02.0: [8086:9bc5] type 00 class 0x030000
[    0.342350] pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit]
[    0.342355] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.342359] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.342374] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.342633] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.342641] pci 0000:00:08.0: reg 0x10: [mem 0x600111a000-0x600111afff 64bit]
[    0.342852] pci 0000:00:12.0: [8086:06f9] type 00 class 0x118000
[    0.342868] pci 0000:00:12.0: reg 0x10: [mem 0x6001119000-0x6001119fff 64bit]
[    0.343106] pci 0000:00:14.0: [8086:06ed] type 00 class 0x0c0330
[    0.343120] pci 0000:00:14.0: reg 0x10: [mem 0x6001100000-0x600110ffff 64bit]
[    0.343178] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.343821] pci 0000:00:14.2: [8086:06ef] type 00 class 0x050000
[    0.343837] pci 0000:00:14.2: reg 0x10: [mem 0x6001114000-0x6001115fff 64bit]
[    0.343847] pci 0000:00:14.2: reg 0x18: [mem 0x6001118000-0x6001118fff 64bit]
[    0.344054] pci 0000:00:16.0: [8086:06e0] type 00 class 0x078000
[    0.344074] pci 0000:00:16.0: reg 0x10: [mem 0x6001117000-0x6001117fff 64bit]
[    0.344145] pci 0000:00:16.0: PME# supported from D3hot
[    0.344738] pci 0000:00:17.0: [8086:06d2] type 00 class 0x010601
[    0.344749] pci 0000:00:17.0: reg 0x10: [mem 0x7da00000-0x7da01fff]
[    0.344756] pci 0000:00:17.0: reg 0x14: [mem 0x7da03000-0x7da030ff]
[    0.344762] pci 0000:00:17.0: reg 0x18: [io  0x4090-0x4097]
[    0.344769] pci 0000:00:17.0: reg 0x1c: [io  0x4080-0x4083]
[    0.344775] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
[    0.344781] pci 0000:00:17.0: reg 0x24: [mem 0x7da02000-0x7da027ff]
[    0.344817] pci 0000:00:17.0: PME# supported from D3hot
[    0.345266] pci 0000:00:1c.0: [8086:06b8] type 01 class 0x060400
[    0.345348] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.346096] pci 0000:00:1c.4: [8086:06bc] type 01 class 0x060400
[    0.346172] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.346195] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
[    0.346930] pci 0000:00:1d.0: [8086:06b0] type 01 class 0x060400
[    0.347006] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.347029] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.347794] pci 0000:00:1f.0: [8086:0685] type 00 class 0x060100
[    0.348208] pci 0000:00:1f.3: [8086:06c8] type 00 class 0x040300
[    0.348238] pci 0000:00:1f.3: reg 0x10: [mem 0x6001110000-0x6001113fff 64bit]
[    0.348275] pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit]
[    0.348350] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.349550] pci 0000:00:1f.4: [8086:06a3] type 00 class 0x0c0500
[    0.349573] pci 0000:00:1f.4: reg 0x10: [mem 0x6001116000-0x60011160ff 64bit]
[    0.349600] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.349956] pci 0000:00:1f.5: [8086:06a4] type 00 class 0x0c8000
[    0.349970] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.350264] acpiphp: Slot [1] registered
[    0.350275] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.350407] pci 0000:02:00.0: [10ec:8125] type 00 class 0x020000
[    0.350423] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.350442] pci 0000:02:00.0: reg 0x18: [mem 0x7d900000-0x7d90ffff 64bit]
[    0.350455] pci 0000:02:00.0: reg 0x20: [mem 0x7d910000-0x7d913fff 64bit]
[    0.350561] pci 0000:02:00.0: supports D1 D2
[    0.350562] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.350705] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.350708] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.350711] pci 0000:00:1c.4:   bridge window [mem 0x7d900000-0x7d9fffff]
[    0.350829] pci 0000:03:00.0: [1cc1:8201] type 00 class 0x010802
[    0.350848] pci 0000:03:00.0: reg 0x10: [mem 0x7d800000-0x7d803fff 64bit]
[    0.351044] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.351048] pci 0000:00:1d.0:   bridge window [mem 0x7d800000-0x7d8fffff]
[    0.353248] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.353365] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.353479] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.353592] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.353705] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.353818] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.353931] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.354044] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.360303] acpi LNXPOWER:0c: Turning OFF
[    0.360309] acpi LNXPOWER:06: Turning OFF
[    0.360373] iommu: Default domain type: Translated 
[    0.360373] SCSI subsystem initialized
[    0.360373] libata version 3.00 loaded.
[    0.360373] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.360373] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.360373] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.360373] vgaarb: loaded
[    0.360373] ACPI: bus type USB registered
[    0.360373] usbcore: registered new interface driver usbfs
[    0.360373] usbcore: registered new interface driver hub
[    0.360373] usbcore: registered new device driver usb
[    0.360373] pps_core: LinuxPPS API ver. 1 registered
[    0.360373] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.360373] PTP clock support registered
[    0.360373] EDAC MC: Ver: 3.0.0
[    0.360373] Registered efivars operations
[    0.360373] NetLabel: Initializing
[    0.360373] NetLabel:  domain hash size = 128
[    0.360373] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.360373] NetLabel:  unlabeled traffic allowed by default
[    0.360373] PCI: Using ACPI for IRQ routing
[    0.404121] PCI: pci_cache_line_size set to 64 bytes
[    0.404190] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.404192] e820: reserve RAM buffer [mem 0x68366018-0x6bffffff]
[    0.404193] e820: reserve RAM buffer [mem 0x6842b000-0x6bffffff]
[    0.404194] e820: reserve RAM buffer [mem 0x684cb000-0x6bffffff]
[    0.404195] e820: reserve RAM buffer [mem 0x68579000-0x6bffffff]
[    0.404196] e820: reserve RAM buffer [mem 0x6acb7000-0x6bffffff]
[    0.404197] e820: reserve RAM buffer [mem 0x6acd9000-0x6bffffff]
[    0.404198] e820: reserve RAM buffer [mem 0x6e59d000-0x6fffffff]
[    0.404199] e820: reserve RAM buffer [mem 0x6ffff000-0x6fffffff]
[    0.404200] e820: reserve RAM buffer [mem 0x880800000-0x883ffffff]
[    0.404204] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.404204] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.406191] clocksource: Switched to clocksource tsc-early
[    0.407808] VFS: Disk quotas dquot_6.6.0
[    0.407808] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.407808] AppArmor: AppArmor Filesystem Enabled
[    0.407808] pnp: PnP ACPI init
[    0.407808] system 00:00: [mem 0x40000000-0x403fffff] has been reserved
[    0.407808] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.407808] system 00:01: [io  0x0a00-0x0a0f] has been reserved
[    0.407808] system 00:01: [io  0x0a10-0x0a1f] has been reserved
[    0.407808] system 00:01: [io  0x0a20-0x0a2f] has been reserved
[    0.407808] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.411517] pnp 00:02: [dma 0 disabled]
[    0.411550] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.411690] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.411692] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.411697] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.411826] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.411830] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.412056] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.412058] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.412060] system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.412061] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.412063] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.412064] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.412065] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.412069] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.412405] system 00:06: [io  0x2000-0x20fe] has been reserved
[    0.412409] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.412702] system 00:07: [mem 0xfd6e0000-0xfd6effff] has been reserved
[    0.412704] system 00:07: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[    0.412705] system 00:07: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[    0.412706] system 00:07: [mem 0xfd6a0000-0xfd6affff] has been reserved
[    0.412710] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.413465] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.413468] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.413469] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.413470] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.413472] system 00:08: [mem 0xfed20000-0xfed7ffff] could not be reserved
[    0.413473] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.413474] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.413478] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.413891] system 00:09: [mem 0xfe038000-0xfe038fff] has been reserved
[    0.413895] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.414452] pnp: PnP ACPI: found 10 devices
[    0.419859] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.419905] NET: Registered protocol family 2
[    0.420038] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.421739] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.421882] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.422122] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.422182] TCP: Hash tables configured (established 262144 bind 65536)
[    0.422280] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.422374] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.422447] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.422527] NET: Registered protocol family 1
[    0.422531] NET: Registered protocol family 44
[    0.422539] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.422555] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.422557] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.422560] pci 0000:00:1c.4:   bridge window [mem 0x7d900000-0x7d9fffff]
[    0.422566] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.422569] pci 0000:00:1d.0:   bridge window [mem 0x7d800000-0x7d8fffff]
[    0.422574] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.422576] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.422577] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.422578] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window]
[    0.422579] pci_bus 0000:00: resource 8 [mem 0x7d800000-0xdfffffff window]
[    0.422580] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
[    0.422581] pci_bus 0000:00: resource 10 [mem 0x4000000000-0x7fffffffff window]
[    0.422583] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.422584] pci_bus 0000:02: resource 1 [mem 0x7d900000-0x7d9fffff]
[    0.422585] pci_bus 0000:03: resource 1 [mem 0x7d800000-0x7d8fffff]
[    0.422729] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.422997] PCI: CLS 64 bytes, default 64
[    0.423002] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.423003] software IO TLB: mapped [mem 0x0000000064364000-0x0000000068364000] (64MB)
[    0.423031] Trying to unpack rootfs image as initramfs...
[    0.423229] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.423238] sgx: EPC section 0x70200000-0x75ffffff
[    0.423903] Initialise system trusted keyrings
[    0.423912] Key type blacklist registered
[    0.423935] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[    0.424814] zbud: loaded
[    0.425030] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.425127] fuse: init (API version 7.34)
[    0.425242] integrity: Platform Keyring initialized
[    0.432708] Key type asymmetric registered
[    0.432709] Asymmetric key parser 'x509' registered
[    0.432716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.432742] io scheduler mq-deadline registered
[    0.433997] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.434047] efifb: probing for efifb
[    0.434064] efifb: showing boot graphics
[    0.434760] efifb: framebuffer at 0x4000000000, using 8100k, total 8100k
[    0.434762] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.434763] efifb: scrolling: redraw
[    0.434763] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.434795] fbcon: Deferring console take-over
[    0.434796] fb0: EFI VGA frame buffer device
[    0.435100] Monitor-Mwait will be used to enter C-1 state
[    0.435107] Monitor-Mwait will be used to enter C-2 state
[    0.435111] ACPI: \_SB_.PR00: Found 2 idle states
[    0.437191] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.437208] ACPI: button: Sleep Button [SLPB]
[    0.437234] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.437246] ACPI: button: Power Button [PWRB]
[    0.437268] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.437292] ACPI: button: Power Button [PWRF]
[    0.439030] thermal LNXTHERM:00: registered as thermal_zone0
[    0.439032] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.439204] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.460152] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.463032] Linux agpgart interface v0.103
[    0.531231] Freeing initrd memory: 58168K
[    0.723502] loop: module loaded
[    0.723825] libphy: Fixed MDIO Bus: probed
[    0.723826] tun: Universal TUN/TAP device driver, 1.6
[    0.723894] PPP generic driver version 2.4.2
[    0.724040] VFIO - User Level meta-driver version: 0.3
[    0.724167] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.724170] ehci-pci: EHCI PCI platform driver
[    0.724180] ehci-platform: EHCI generic platform driver
[    0.724186] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.724188] ohci-pci: OHCI PCI platform driver
[    0.724193] ohci-platform: OHCI generic platform driver
[    0.724197] uhci_hcd: USB Universal Host Controller Interface driver
[    0.724228] i8042: PNP: No PS/2 controller found.
[    0.724326] mousedev: PS/2 mouse device common for all mice
[    0.724450] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.725334] rtc_cmos rtc_cmos: registered as rtc0
[    0.725595] rtc_cmos rtc_cmos: setting system clock to 2022-03-14T07:35:47 UTC (1647243347)
[    0.725606] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.725611] i2c /dev entries driver
[    0.726099] device-mapper: uevent: version 1.0.3
[    0.726136] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.726148] platform eisa.0: Probing EISA bus 0
[    0.726150] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.726151] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.726152] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.726153] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.726154] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.726155] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.726155] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.726156] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.726157] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.726158] platform eisa.0: EISA: Detected 0 cards
[    0.726161] intel_pstate: Intel P-state driver initializing
[    0.726963] intel_pstate: HWP enabled
[    0.727060] ledtrig-cpu: registered to indicate activity on CPUs
[    0.727064] EFI Variables Facility v0.08 2004-May-17
[    0.734671] intel_pmc_core INT33A1:00:  initialized
[    0.734727] drop_monitor: Initializing network drop monitor service
[    0.734808] NET: Registered protocol family 10
[    0.738234] Segment Routing with IPv6
[    0.738245] NET: Registered protocol family 17
[    0.738264] Key type dns_resolver registered
[    0.739085] microcode: sig=0xa0655, pf=0x2, revision=0xec
[    0.739131] microcode: Microcode Update Driver: v2.2.
[    0.739133] IPI shorthand broadcast: enabled
[    0.739138] sched_clock: Marking stable (738552460, 576499)->(746524368, -7395409)
[    0.739327] registered taskstats version 1
[    0.739334] Loading compiled-in X.509 certificates
[    0.739727] Loaded X.509 cert 'Build time autogenerated kernel key: 5f6c510aaa10fd3fcaa8fd7597766fc3e127b77c'
[    0.740074] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.740416] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.740417] blacklist: Loading compiled-in revocation X.509 certificates
[    0.740426] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    0.740667] zswap: loaded using pool lzo/zbud
[    0.740831] Key type ._fscrypt registered
[    0.740832] Key type .fscrypt registered
[    0.740832] Key type fscrypt-provisioning registered
[    0.740994] Key type trusted registered
[    0.742353] Key type encrypted registered
[    0.742355] AppArmor: AppArmor sha1 policy hashing enabled
[    0.742544] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[    0.742679] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.742682] Loading compiled-in module X.509 certificates
[    0.742991] Loaded X.509 cert 'Build time autogenerated kernel key: 5f6c510aaa10fd3fcaa8fd7597766fc3e127b77c'
[    0.742992] ima: Allocated hash algorithm: sha1
[    0.959495] ima: No architecture policies found
[    0.959535] evm: Initialising EVM extended attributes:
[    0.959537] evm: security.selinux
[    0.959540] evm: security.SMACK64
[    0.959542] evm: security.SMACK64EXEC
[    0.959544] evm: security.SMACK64TRANSMUTE
[    0.959546] evm: security.SMACK64MMAP
[    0.959547] evm: security.apparmor
[    0.959549] evm: security.ima
[    0.959551] evm: security.capability
[    0.959552] evm: HMAC attrs: 0x1
[    0.960342] PM:   Magic number: 14:801:571
[    0.960892] RAS: Correctable Errors collector initialized.
[    0.964667] Freeing unused decrypted memory: 2036K
[    0.965639] Freeing unused kernel image (initmem) memory: 2904K
[    0.965645] Write protecting the kernel read-only data: 30720k
[    0.966862] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.967552] Freeing unused kernel image (rodata/data gap) memory: 1796K
[    1.002318] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.002332] Run /init as init process
[    1.002335]   with arguments:
[    1.002336]     /init
[    1.002338]     splash
[    1.002339]   with environment:
[    1.002340]     HOME=/
[    1.002341]     TERM=linux
[    1.002342]     BOOT_IMAGE=/boot/vmlinuz-5.13.0-35-generic
[    1.063462] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[    1.063494] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[    1.063833] ahci 0000:00:17.0: version 3.0
[    1.063929] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.063934] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.064033] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.064446] nvme 0000:03:00.0: platform quirk: setting simple suspend
[    1.064469] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.064479] r8169 0000:02:00.0: enabling device (0000 -> 0003)
[    1.064481] nvme nvme0: pci function 0000:03:00.0
[    1.064996] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    1.065115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[    1.065116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.065117] usb usb1: Product: xHCI Host Controller
[    1.065118] usb usb1: Manufacturer: Linux 5.13.0-35-generic xhci-hcd
[    1.065119] usb usb1: SerialNumber: 0000:00:14.0
[    1.065208] hub 1-0:1.0: USB hub found
[    1.065222] hub 1-0:1.0: 16 ports detected
[    1.065812] i2c i2c-0: 2/4 memory slots populated (from DMI)
[    1.066541] i2c i2c-0: Successfully instantiated SPD at 0x51
[    1.067134] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.067136] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.067137] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.067155] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
[    1.067157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.067157] usb usb2: Product: xHCI Host Controller
[    1.067158] usb usb2: Manufacturer: Linux 5.13.0-35-generic xhci-hcd
[    1.067159] usb usb2: SerialNumber: 0000:00:14.0
[    1.067231] hub 2-0:1.0: USB hub found
[    1.067264] hub 2-0:1.0: 10 ports detected
[    1.067274] i2c i2c-0: Successfully instantiated SPD at 0x53
[    1.067713] usb: port power management may be unreliable
[    1.075440] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.075443] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst 
[    1.078535] nvme nvme0: 15/0/0 default/read/poll queues
[    1.079814]  nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8
[    1.080921] libphy: r8169: probed
[    1.081046] r8169 0000:02:00.0 eth0: RTL8125B, 2c:f0:5d:29:20:f2, XID 641, IRQ 141
[    1.081048] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    1.081473] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.140168] scsi host0: ahci
[    1.140414] scsi host1: ahci
[    1.140622] scsi host2: ahci
[    1.140810] scsi host3: ahci
[    1.141061] scsi host4: ahci
[    1.141319] scsi host5: ahci
[    1.141362] ata1: SATA max UDMA/133 abar m2048@0x7da02000 port 0x7da02100 irq 123
[    1.141365] ata2: SATA max UDMA/133 abar m2048@0x7da02000 port 0x7da02180 irq 123
[    1.141367] ata3: SATA max UDMA/133 abar m2048@0x7da02000 port 0x7da02200 irq 123
[    1.141368] ata4: SATA max UDMA/133 abar m2048@0x7da02000 port 0x7da02280 irq 123
[    1.141370] ata5: SATA max UDMA/133 abar m2048@0x7da02000 port 0x7da02300 irq 123
[    1.141372] ata6: SATA max UDMA/133 abar m2048@0x7da02000 port 0x7da02380 irq 123
[    1.395473] usb 1-9: new full-speed USB device number 2 using xhci_hcd
[    1.443516] tsc: Refined TSC clocksource calibration: 2904.000 MHz
[    1.443536] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc05e54fc, max_idle_ns: 440795291716 ns
[    1.443606] clocksource: Switched to clocksource tsc
[    1.454411] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.454457] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.454498] ata4: SATA link down (SStatus 4 SControl 300)
[    1.454531] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.454573] ata5: SATA link down (SStatus 4 SControl 300)
[    1.454618] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.456140] ata1.00: ATA-10: ST4000VX000-2AG166, CV11, max UDMA/133
[    1.456151] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.456211] ata6.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
[    1.456221] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[    1.456341] ata3.00: ATA-8: TOSHIBA HDWD130, MX6OACF0, max UDMA/133
[    1.456350] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.457666] ata1.00: configured for UDMA/133
[    1.457938] scsi 0:0:0:0: Direct-Access     ATA      ST4000VX000-2AG1 CV11 PQ: 0 ANSI: 5
[    1.458138] ata6.00: configured for UDMA/133
[    1.458267] ata3.00: configured for UDMA/133
[    1.458337] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.458415] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    1.458423] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.458440] sd 0:0:0:0: [sda] Write Protect is off
[    1.458445] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.458470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.460042] ata2.00: ATA-9: WDC WD82PURZ-85TEUY0, 82.00A82, max UDMA/133
[    1.460044] ata2.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.468741] ata2.00: configured for UDMA/133
[    1.468815] scsi 1:0:0:0: Direct-Access     ATA      WDC WD82PURZ-85T 0A82 PQ: 0 ANSI: 5
[    1.468927] sd 1:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[    1.468929] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.468932] sd 1:0:0:0: [sdb] Write Protect is off
[    1.468933] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.468935] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.468939] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.469102] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA HDWD130  ACF0 PQ: 0 ANSI: 5
[    1.469213] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    1.469215] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[    1.469218] sd 2:0:0:0: [sdc] Write Protect is off
[    1.469219] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.469223] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.469224] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.469434] scsi 5:0:0:0: Direct-Access     ATA      ST3500320AS      SD1A PQ: 0 ANSI: 5
[    1.469508] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    1.469560] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.469564] sd 5:0:0:0: [sdd] Write Protect is off
[    1.469565] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.469570] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.526853]  sdc: sdc3 sdc4
[    1.533428]  sda: sda1 sda2 sda3 sda4 sda5
[    1.539141]  sdd: sdd1
[    1.553153]  sdb: sdb1 sdb2
[    1.559464] sd 2:0:0:0: [sdc] Attached SCSI disk
[    1.567469] sd 5:0:0:0: [sdd] Attached SCSI disk
[    1.571521] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.587514] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.594379] usb 1-9: New USB device found, idVendor=046d, idProduct=c06b, bcdDevice=65.02
[    1.594383] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.594385] usb 1-9: Product: G700 Laser Mouse
[    1.594386] usb 1-9: Manufacturer: Logitech
[    1.594387] usb 1-9: SerialNumber: 9A2D46A70037
[    1.731454] usb 1-10: new low-speed USB device number 3 using xhci_hcd
[    1.885616] usb 1-10: New USB device found, idVendor=0518, idProduct=0002, bcdDevice= 1.00
[    1.885619] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.885620] usb 1-10: Product: USB-compliant keyboard
[    2.015473] usb 1-11: new high-speed USB device number 4 using xhci_hcd
[    2.165147] usb 1-11: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
[    2.165158] usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.165164] usb 1-11: Product: USB2.0 Hub
[    2.166452] hub 1-11:1.0: USB hub found
[    2.166821] hub 1-11:1.0: 4 ports detected
[    2.295489] usb 1-12: new full-speed USB device number 5 using xhci_hcd
[    2.444435] usb 1-12: New USB device found, idVendor=1462, idProduct=7c75, bcdDevice= 0.01
[    2.444446] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.444451] usb 1-12: Product: MYSTIC LIGHT 
[    2.444455] usb 1-12: Manufacturer: MSI
[    2.444459] usb 1-12: SerialNumber: A02020021806
[    2.448412] hid: raw HID events driver (C) Jiri Kosina
[    2.496090] usbcore: registered new interface driver usbhid
[    2.496093] usbhid: USB HID core driver
[    2.498666] input: Logitech G700 Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:046D:C06B.0001/input/input3
[    2.498781] hid-generic 0003:046D:C06B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G700 Laser Mouse] on usb-0000:00:14.0-9/input0
[    2.499034] input: Logitech G700 Laser Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C06B.0002/input/input4
[    2.527495] usb 1-11.1: new high-speed USB device number 6 using xhci_hcd
[    2.555925] hid-generic 0003:046D:C06B.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G700 Laser Mouse] on usb-0000:00:14.0-9/input1
[    2.556380] input: MSI MYSTIC LIGHT  as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:1462:7C75.0005/input/input7
[    2.556888] hid-generic 0003:1462:7C75.0005: input,hiddev1,hidraw2: USB HID v1.10 Device [MSI MYSTIC LIGHT ] on usb-0000:00:14.0-12/input0
[    2.560369] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:0518:0002.0003/input/input8
[    2.619755] ezkey 0003:0518:0002.0003: input,hidraw3: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:14.0-10/input0
[    2.620071] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0518:0002.0004/input/input9
[    2.629947] usb 1-11.1: New USB device found, idVendor=2717, idProduct=ff80, bcdDevice= 4.04
[    2.629958] usb 1-11.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.629963] usb 1-11.1: Product: SDM636-MTP _SN:8AA658C2
[    2.629968] usb 1-11.1: Manufacturer: Xiaomi
[    2.629971] usb 1-11.1: SerialNumber: 2990ac7d
[    2.680004] ezkey 0003:0518:0002.0004: input,hidraw4: USB HID v1.10 Device [USB-compliant keyboard] on usb-0000:00:14.0-10/input1
[    2.731219] fbcon: Taking over console
[    2.731245] Console: switching to colour frame buffer device 240x67
[    2.733759] EXT4-fs (nvme0n1p8): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    2.793361] systemd[1]: Inserted module 'autofs4'
[    2.815836] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.835538] systemd[1]: Detected architecture x86-64.
[    2.856065] systemd[1]: Set hostname to <iznobe-PC>.
[    2.932543] systemd[1]: Created slice system-modprobe.slice.
[    2.932653] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.932762] systemd[1]: Created slice User and Session Slice.
[    2.932788] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.932858] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.932881] systemd[1]: Reached target User and Group Name Lookups.
[    2.932887] systemd[1]: Reached target Remote File Systems.
[    2.932891] systemd[1]: Reached target Slices.
[    2.932936] systemd[1]: Listening on Syslog Socket.
[    2.932971] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.932992] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.933062] systemd[1]: Listening on Journal Audit Socket.
[    2.933095] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.933132] systemd[1]: Listening on Journal Socket.
[    2.933170] systemd[1]: Listening on udev Control Socket.
[    2.933197] systemd[1]: Listening on udev Kernel Socket.
[    2.933564] systemd[1]: Mounting Huge Pages File System...
[    2.933926] systemd[1]: Mounting POSIX Message Queue File System...
[    2.934333] systemd[1]: Mounting Kernel Debug File System...
[    2.934731] systemd[1]: Mounting Kernel Trace File System...
[    2.935298] systemd[1]: Starting Journal Service...
[    2.935701] systemd[1]: Starting Set the console keyboard layout...
[    2.936148] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.936541] systemd[1]: Starting Load Kernel Module drm...
[    2.936804] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    2.936818] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.937339] systemd[1]: Starting Load Kernel Modules...
[    2.937692] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.938047] systemd[1]: Starting udev Coldplug all Devices...
[    2.938406] systemd[1]: Starting Uncomplicated firewall...
[    2.939037] systemd[1]: Mounted Huge Pages File System.
[    2.939097] systemd[1]: Mounted POSIX Message Queue File System.
[    2.939143] systemd[1]: Mounted Kernel Debug File System.
[    2.939186] systemd[1]: Mounted Kernel Trace File System.
[    2.939369] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.939743] systemd[1]: Finished Uncomplicated firewall.
[    2.940796] EXT4-fs (nvme0n1p8): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[    2.941333] systemd[1]: Finished Remount Root and Kernel File Systems.
[    2.941566] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    2.941582] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    2.942017] systemd[1]: Starting Load/Save Random Seed...
[    2.942402] systemd[1]: Starting Create System Users...
[    2.943121] systemd[1]: modprobe@drm.service: Succeeded.
[    2.943277] systemd[1]: Finished Load Kernel Module drm.
[    2.944018] lp: driver loaded but no devices found
[    2.945362] ppdev: user-space parallel port driver
[    2.948402] systemd[1]: Finished Load/Save Random Seed.
[    2.949120] systemd[1]: Finished Create System Users.
[    2.949518] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.954100] systemd[1]: Finished Create Static Device Nodes in /dev.
[    2.954587] systemd[1]: Starting udev Kernel Device Manager...
[    2.964057] systemd[1]: Finished Set the console keyboard layout.
[    2.964108] systemd[1]: Reached target Local File Systems (Pre).
[    2.965198] systemd[1]: Mounting Mount unit for bare, revision 5...
[    2.965725] systemd[1]: Mounting Mount unit for core18, revision 2128...
[    2.966512] systemd[1]: Mounting Mount unit for core18, revision 2284...
[    2.966874] loop0: detected capacity change from 0 to 113536
[    2.967037] systemd[1]: Mounting Mount unit for core20, revision 1361...
[    2.967513] systemd[1]: Mounting Mount unit for core20, revision 1376...
[    2.968133] systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 161...
[    2.968620] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 72...
[    2.969065] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 77...
[    2.969589] systemd[1]: Mounting Mount unit for gnome-3-38-2004, revision 99...
[    2.970145] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1515...
[    2.970584] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1519...
[    2.971154] systemd[1]: Mounting Mount unit for snap-store, revision 547...
[    2.971644] systemd[1]: Mounting Mount unit for snap-store, revision 558...
[    2.972157] systemd[1]: Mounting Mount unit for snapd, revision 14978...
[    2.972319] systemd[1]: Started Journal Service.
[    2.975799] systemd-journald[399]: Received client request to flush runtime journal.
[    2.996463] loop1: detected capacity change from 0 to 113680
[    3.051788] loop2: detected capacity change from 0 to 8
[    3.053097] loop3: detected capacity change from 0 to 126760
[    3.083730] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002)
[    3.084212] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[    3.084633] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[    3.086893] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.086894] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.086895] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.086895] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.086895] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.087160] usbcore: registered new interface driver cdc_ether
[    3.087963] loop4: detected capacity change from 0 to 448512
[    3.088050] loop5: detected capacity change from 0 to 111080
[    3.088466] cryptd: max_cpu_qlen set to 1000
[    3.088474] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.091258] rndis_host 1-11.1:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-11.1, RNDIS device, ae:39:a6:60:88:1c
[    3.091283] usbcore: registered new interface driver rndis_host
[    3.093828] loop6: detected capacity change from 0 to 126752
[    3.093976] AVX2 version of gcm_enc/dec engaged.
[    3.094006] AES CTR mode by8 optimization enabled
[    3.097923] pstore: Using crash dump compression: deflate
[    3.097933] pstore: Registered efi as persistent store backend
[    3.121681] loop7: detected capacity change from 0 to 509456
[    3.183560] intel_tcc_cooling: Programmable TCC Offset detected
[    3.185198] checking generic (4000000000 7e9000) vs hw (6000000000 1000000)
[    3.185200] checking generic (4000000000 7e9000) vs hw (4000000000 10000000)
[    3.185200] fb0: switching to inteldrmfb from EFI VGA
[    3.185287] Console: switching to colour dummy device 80x25
[    3.185316] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.186328] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.186786] intel_rapl_common: Found RAPL domain package
[    3.186787] intel_rapl_common: Found RAPL domain core
[    3.186788] intel_rapl_common: Found RAPL domain uncore
[    3.186789] intel_rapl_common: Found RAPL domain dram
[    3.187031] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    3.188189] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    3.194184] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.195659] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    3.197741] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.198113] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    3.198191] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.231533] loop8: detected capacity change from 0 to 133320
[    3.235916] fbcon: i915drmfb (fb0) is primary device
[    3.235942] Console: switching to colour frame buffer device 240x67
[    3.235954] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    3.255331] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    3.255334] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.255335] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.255336] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.255336] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.255337] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    3.255338] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    3.255339] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    3.281818] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    3.281845] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    3.281868] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.281890] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    3.281911] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    3.281931] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    3.281954] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    3.281974] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    3.281994] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    3.282014] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    3.282035] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    3.282054] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    3.282074] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    3.359488] loop9: detected capacity change from 0 to 133552
[    3.412580] EXT4-fs (sdb1): warning: checktime reached, running e2fsck is recommended
[    3.435886] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    3.467608] loop10: detected capacity change from 0 to 448512
[    3.539615] loop11: detected capacity change from 0 to 104360
[    3.599530] loop12: detected capacity change from 0 to 337424
[    3.695524] loop13: detected capacity change from 0 to 89264
[    3.763497] Adding 33554428k swap on /dev/sdc4.  Priority:-2 extents:1 across:33554428k FS
[    3.787447] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    3.806717] audit: type=1400 audit(1647243350.574:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1027 comm="apparmor_parser"
[    3.806760] audit: type=1400 audit(1647243350.574:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1023 comm="apparmor_parser"
[    3.806925] audit: type=1400 audit(1647243350.574:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1032 comm="apparmor_parser"
[    3.806946] audit: type=1400 audit(1647243350.574:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=1029 comm="apparmor_parser"
[    3.807336] audit: type=1400 audit(1647243350.574:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1030 comm="apparmor_parser"
[    3.807339] audit: type=1400 audit(1647243350.574:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1030 comm="apparmor_parser"
[    3.807621] audit: type=1400 audit(1647243350.578:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1028 comm="apparmor_parser"
[    3.807625] audit: type=1400 audit(1647243350.578:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1024 comm="apparmor_parser"
[    3.807627] audit: type=1400 audit(1647243350.578:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1024 comm="apparmor_parser"
[    4.347453] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[    4.475673] loop14: detected capacity change from 0 to 8
[    4.543581] r8169 0000:02:00.0 enp2s0: Link is Down
[    7.423265] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[    7.423277] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   12.641851] rfkill: input handler disabled
[   12.731684] kauditd_printk_skb: 27 callbacks suppressed
[   12.731686] audit: type=1400 audit(1647243359.502:38): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=1892 comm="snap-confine" capability=4  capname="fsetid"
[   14.757116] audit: type=1326 audit(1647243361.526:39): auid=1000 uid=1000 gid=1000 ses=2 subj=snap.snap-store.ubuntu-software pid=1892 comm="snap-store" exe="/snap/snap-store/558/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f3bc537676d code=0x50000
[   16.889687] audit: type=1107 audit(1647243363.658:40): pid=1065 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.8" pid=1892 label="snap.snap-store.ubuntu-software" peer_pid=1081 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   16.889907] audit: type=1107 audit(1647243363.658:41): pid=1065 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.8" pid=1892 label="snap.snap-store.ubuntu-software" peer_pid=1081 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   16.965631] audit: type=1107 audit(1647243363.734:42): pid=1065 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.8" pid=1892 label="snap.snap-store.ubuntu-software" peer_pid=1081 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   16.965949] audit: type=1107 audit(1647243363.734:43): pid=1065 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.8" pid=1892 label="snap.snap-store.ubuntu-software" peer_pid=1081 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   17.572625] audit: type=1400 audit(1647243364.342:44): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=1892 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   29.500146] audit: type=1400 audit(1647243376.270:45): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=1892 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   29.516939] audit: type=1400 audit(1647243376.286:46): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=1892 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   29.819443] audit: type=1326 audit(1647243376.586:47): auid=1000 uid=1000 gid=1000 ses=2 subj=snap.snap-store.ubuntu-software pid=1892 comm="pool-org.gnome." exe="/snap/snap-store/558/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f3bc536d3cb code=0x50000
iznobe@iznobe-PC:~$

Dernière modification par iznobe (Le 14/03/2022, à 09:00)

xubu1957 · Le 14/03/2022, à 08:48

extrait du 1) au #1) a écrit :

Une fois le smartphone connecté en USB et le partage par USB activé,une nouvelle connexion filaire apparaîtra dans les secondes suivantes avec un doux nom ésotérique
(exemple : «enp0s29u1u2 ») et un nom plus parlant « Connexion filaire 2 ».

C'est pas visible chez toi au #13 #24.

Dernière modification par xubu1957 (Le 14/03/2022, à 14:32)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 06/03/2018, à 17:49

▶ Connexion de secours - partage de connexion avec un smartphone ◀

#2 Le 15/12/2018, à 13:19

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#3 Le 22/01/2019, à 14:44

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#4 Le 22/01/2019, à 15:41

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#5 Le 26/04/2019, à 19:00

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#6 Le 26/04/2019, à 20:31

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#7 Le 16/07/2019, à 08:39

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#8 Le 16/12/2019, à 17:19

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#9 Le 16/12/2019, à 17:56

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#10 Le 16/12/2019, à 18:12

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#11 Le 13/03/2022, à 09:20

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#12 Le 13/03/2022, à 10:12

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#13 Le 13/03/2022, à 10:19

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#14 Le 13/03/2022, à 10:25

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#15 Le 13/03/2022, à 11:00

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#16 Le 13/03/2022, à 11:05

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#17 Le 13/03/2022, à 11:10

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#18 Le 13/03/2022, à 11:11

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#19 Le 13/03/2022, à 12:36

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#20 Le 13/03/2022, à 12:38

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#21 Le 13/03/2022, à 12:50

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#22 Le 14/03/2022, à 08:29

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#23 Le 14/03/2022, à 08:40

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#24 Le 14/03/2022, à 08:41

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

#25 Le 14/03/2022, à 08:48

Re : ▶ Connexion de secours - partage de connexion avec un smartphone ◀

Pied de page des forums