#1 Le 18/01/2020, à 15:16
- Nuliel
disque dur Seagate Samsung Spinpoint M8 avis smart
Bonjour,
J'aurais besoin d'avis sur l'état d'un disque dur. C'est un Seagate Samsung Spinpoint M8 ST1000LM024 de 1 Tb.
xubuntu@xubuntu:~$ sudo smartctl -s on -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-29-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST1000LM024 HN-M101MBB
Serial Number: S32XJ9BG951919
LU WWN Device Id: 5 0004cf 210ac4103
Firmware Version: 2BA30001
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jan 18 13:12:25 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 25) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: (12120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 202) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 11
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 094 089 025 Pre-fail Always - 2116
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2284
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1324
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2291
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 701
192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 76
194 Temperature_Celsius 0x0002 064 054 000 Old_age Always - 29 (Min/Max 14/46)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 4665
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 337
225 Load_Cycle_Count 0x0032 095 095 000 Old_age Always - 55251
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Aborted by host 90% 1323 -
# 2 Short offline Completed without error 00% 1322 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Aborted_by_host [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
xubuntu@xubuntu:~$Qu'en pensez-vous?
Ce disque dur vient d'un pc qui est limite pas utilisable vu sa lenteur.
Merci d'avance
Naziel
Dernière modification par Nuliel (Le 18/01/2020, à 15:17)
Hors ligne
#2 Le 18/01/2020, à 17:11
- inbox
Re : disque dur Seagate Samsung Spinpoint M8 avis smart
Salut,
Les deux informations suivantes peuvent expliquer les soucis rencontrés :
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 701701 chocs détectés, c'est beaucoup pour un disque ayant si peut d'usage.
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 4665D'après ce site, ces erreurs proviennent de la tête de lecture ou des problèmes électro-mécaniques. Il n'y a pas besoin de changer de disque sur un système non critique.
A+
Les erreurs 200 peuvent avoir été générées par les 701 chocs. Dans ce cas, l'usure prématurée viendrait du manque de précautions lors la manipulation.
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#3 Le 18/01/2020, à 17:26
- Nuliel
Re : disque dur Seagate Samsung Spinpoint M8 avis smart
Merci inbox
J'avais surtout peur sur la valeur de Load_Cycle_Count que je trouvais élevée par rapport au nombre d'heures de fonctionnement.
Par contre il y a une partition de 600 Gb dessus avec le label DATA qui est vide, c'est bizarre
Hors ligne