Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 28/01/2020, à 23:29

yoelchet

[DualBoot] Windows ne démarre plus apres réinstallation d'Ubuntu

Bonjour,

Tout d'abord, merci pour toutes les informations de ce forum ! A de nombreuses reprises ce forum m'a été utile même si ce n'est que la première fois que je poste un sujet. Mon problème est le suivant :

Jusqu'à présent je possédais un dualboot Windows 10 / Ubuntu avec 3 partitions principales :
- 1 partition de 30 go pour Ubuntu
- 1 partition "partagée" de 150 go en NTFS lisible par Ubuntu et Windows
- 1 partition Windows en NTFS d'un peu plus de 300 go, elle aussi lisible par Ubuntu. 
Tout fonctionnait bien, mais à l'usage, la partition Ubuntu était trop petite et la partition partagée pas du tout utilisée.

J'ai donc supprimé les partitions Ubuntu et partagée afin :
- d'étendre ma partition Windows de 100go
- réinstallé Ubuntu sur une partition un peu plus grande de 80 go

J'ai supprimé les partitions via l'outil Windows, puis réinstallé Ubuntu via une clé USB sur une nouvelle partition avec l'espace libre restant (comme je l'ai fait la première fois).
 
Problème depuis l'installation d'Ubuntu, Windows ne démarre plus (sauf sur l'outil de réparation qui tombe en erreur) et la partition Windows n'est pas non plus reconnu par mon Ubuntu (problème de montage apparemment).

Vous trouverez ci-dessous le rapport boot-info ;
http://paste.ubuntu.com/p/gqN3qHsQST/

Pourriez-vous m'aider ?

Un grand grand merci par avance smile
Yoel,

Hors ligne

#2 Le 29/01/2020, à 00:19

geole

Re : [DualBoot] Windows ne démarre plus apres réinstallation d'Ubuntu

Bonsoir
Il  serait bon que tu bootes avec ubuntu, que tu installes l'application smartmontools  ( https://doc.ubuntu-fr.org/smartmontools

sudo apt-get install --no-install-recommends smartmontools 

et que tu donnes le retour de cette commande

sudo smartctl  -s  on  -a   /dev/sda

MOTIF.    Le message  n'est pas rassurant  Failed to read NTFS $Bitmap: Input/output error


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#3 Le 29/01/2020, à 00:36

yoelchet

Re : [DualBoot] Windows ne démarre plus apres réinstallation d'Ubuntu

Bonsoir,

Merci pour ta réponse rapide !
Voici le résultat de la commande :

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-28-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HFS512G39TND-N210A
Serial Number:    FS6CN43011140CN17
Firmware Version: 30200P10
User Capacity:    512110190592 bytes [512 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      M.2
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Jan 28 23:30:34 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (  32)	The self-test routine was interrupted
					by the host with a hard or soft reset.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x19) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0002)	Does not save SMART data before
					entering power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  40) minutes.

SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   166   164   006    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0032   253   100   036    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   090   090   000    Old_age   Always       -       9410
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       850
100 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       27776584
168 Unknown_Attribute       0x0032   089   089   000    Old_age   Always       -       126
169 Unknown_Attribute       0x0032   075   075   000    Old_age   Always       -       275
171 Unknown_Attribute       0x0032   253   253   000    Old_age   Always       -       0
172 Unknown_Attribute       0x0032   253   253   000    Old_age   Always       -       0
174 Unknown_Attribute       0x0030   100   100   000    Old_age   Offline      -       221
175 Program_Fail_Count_Chip 0x0032   253   253   000    Old_age   Always       -       0
176 Erase_Fail_Count_Chip   0x0032   253   253   000    Old_age   Always       -       0
177 Wear_Leveling_Count     0x0032   081   001   000    Old_age   Always       -       209
178 Used_Rsvd_Blk_Cnt_Chip  0x0032   100   100   000    Old_age   Always       -       63
179 Used_Rsvd_Blk_Cnt_Tot   0x0032   100   100   000    Old_age   Always       -       545
180 Unused_Rsvd_Blk_Cnt_Tot 0x0032   100   100   000    Old_age   Always       -       10463
184 End-to-End_Error        0x0032   100   100   000    Old_age   Always       -       441473
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       255
188 Command_Timeout         0x0032   253   253   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   035   025   000    Old_age   Always       -       35 (Min/Max 0/67)
195 Hardware_ECC_Recovered  0x0032   097   001   000    Old_age   Always       -       153227900
196 Reallocated_Event_Count 0x0032   253   100   036    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0032   100   100   000    Old_age   Always       -       3256768
199 UDMA_CRC_Error_Count    0x0032   253   253   000    Old_age   Always       -       0
204 Soft_ECC_Correction     0x000e   001   001   000    Old_age   Always       -       1833
212 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       9835
234 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       116120
241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       9602
242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always       -       20005
250 Read_Error_Retry_Rate   0x0032   100   100   000    Old_age   Always       -       28386067

SMART Error Log Version: 1
ATA Error Count: 2775 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2775 occurred at disk power-on lifetime: 9410 hours (392 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 10 d8 d0 17 40 40      00:00:07.350  READ FPDMA QUEUED
  60 08 08 d0 d0 17 40 40      00:00:07.350  READ FPDMA QUEUED
  60 08 00 c8 d0 17 40 40      00:00:07.340  READ FPDMA QUEUED
  60 08 f8 c0 d0 17 40 40      00:00:07.340  READ FPDMA QUEUED
  60 08 f0 c0 d0 17 40 40      00:00:07.340  READ FPDMA QUEUED

Error 2774 occurred at disk power-on lifetime: 9410 hours (392 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 80 e8 c0 d0 17 40 40      00:00:07.310  READ FPDMA QUEUED
  60 80 e0 40 d0 17 40 40      00:00:07.310  READ FPDMA QUEUED
  60 38 d8 80 35 aa 40 40      00:00:07.300  READ FPDMA QUEUED
  60 78 d0 68 1e 42 40 40      00:00:07.300  READ FPDMA QUEUED
  60 00 c8 68 1d 42 40 40      00:00:07.300  READ FPDMA QUEUED

Error 2773 occurred at disk power-on lifetime: 9410 hours (392 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 d8 d8 9d 68 40 40      00:00:07.200  READ FPDMA QUEUED
  60 08 d0 d0 9d 68 40 40      00:00:07.200  READ FPDMA QUEUED
  60 08 c8 c8 9d 68 40 40      00:00:07.200  READ FPDMA QUEUED
  60 08 c0 c0 9d 68 40 40      00:00:07.200  READ FPDMA QUEUED
  60 08 b8 b8 9d 68 40 40      00:00:07.200  READ FPDMA QUEUED

Error 2772 occurred at disk power-on lifetime: 9410 hours (392 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 a8 a8 99 68 40 40      00:00:07.170  READ FPDMA QUEUED
  60 08 a0 a0 99 68 40 40      00:00:07.170  READ FPDMA QUEUED
  60 08 98 98 99 68 40 40      00:00:07.170  READ FPDMA QUEUED
  60 08 90 90 99 68 40 40      00:00:07.170  READ FPDMA QUEUED
  60 08 88 88 99 68 40 40      00:00:07.170  READ FPDMA QUEUED

Error 2771 occurred at disk power-on lifetime: 9410 hours (392 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 a0 a8 9f 68 40 40      00:00:07.120  READ FPDMA QUEUED
  60 00 98 a8 9e 68 40 40      00:00:07.120  READ FPDMA QUEUED
  60 00 90 a8 9d 68 40 40      00:00:07.120  READ FPDMA QUEUED
  60 00 88 a8 9c 68 40 40      00:00:07.120  READ FPDMA QUEUED
  60 00 80 a8 9b 68 40 40      00:00:07.120  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

Je me demande si essayer un ntfsfix depuis Ubuntu ferait avancer les choses ?
Merci encore,

Hors ligne

#4 Le 29/01/2020, à 08:09

malbo

Re : [DualBoot] Windows ne démarre plus apres réinstallation d'Ubuntu

Bonjour,
Je colle ci-dessous le contenu du Boot-info dont tu as donné le lien ( http://paste.ubuntu.com/p/gqN3qHsQST/ ) dans le post #1 :

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/Boot/bootx64.efi 
                       /EFI/Boot/fbx64.efi /EFI/ubuntu/fwupx64.efi 
                       /EFI/ubuntu/grubx64.efi /EFI/ubuntu/mmx64.efi 
                       /EFI/ubuntu/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/memtest.efi

sda2: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: /mnt/BootInfo/sda2: unknown filesystem type ''.

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Mounting failed:   mount: /mnt/BootInfo/sda2: unknown filesystem type ''.
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda6: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 6.03
    Boot sector info:  Syslinux looks at sector 32784 of /dev/sdb1 for its 
                       second stage. The integrity check of Syslinux failed. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 477 GiB, 512110190592 bytes, 1000215216 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,000,215,215 1,000,215,215  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048       534,527       532,480 EFI System partition
/dev/sda2               534,528       567,295        32,768 Microsoft Reserved Partition (Windows)
/dev/sda3               567,296   836,784,127   836,216,832 Data partition (Windows/Linux)
/dev/sda4      R    998,576,128 1,000,214,527     1,638,400 Windows Recovery Environment (Windows)
/dev/sda5           836,784,128   996,624,383   159,840,256 Data partition (Linux)
/dev/sda6           996,624,384   998,576,127     1,951,744 Swap partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 7.5 GiB, 8054112256 bytes, 15730688 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *          2,048    15,730,687    15,728,640   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/loop8                                              squashfs   
/dev/sda1        D81E-6BF7                              vfat       SYSTEM
/dev/sda2                                                          
/dev/sda3        5CEC2552EC2527AA                       ntfs       OS
/dev/sda4        D0F63246F6322D5A                       ntfs       RECOVERY
/dev/sda5        b55c2f39-ed36-4270-92cb-0b41dffcc6c1   ext4       
/dev/sda6        5130aee5-e454-40d9-98b1-d2c31c7f21cb   swap       
/dev/sdb1        C0CD-7D03                              vfat       UBUNTU 18_0

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jan 28 21:05 ata-HFS512G39TND-N210A_FS6CN43011140CN17 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 28 21:05 ata-HFS512G39TND-N210A_FS6CN43011140CN17-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 28 21:05 ata-HFS512G39TND-N210A_FS6CN43011140CN17-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 28 21:05 ata-HFS512G39TND-N210A_FS6CN43011140CN17-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan 28 21:06 ata-HFS512G39TND-N210A_FS6CN43011140CN17-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Jan 28 21:05 ata-HFS512G39TND-N210A_FS6CN43011140CN17-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Jan 28 21:05 ata-HFS512G39TND-N210A_FS6CN43011140CN17-part6 -> ../../sda6
lrwxrwxrwx 1 root root  9 Jan 28 21:05 usb-SMI_USB_DISK-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 28 21:05 usb-SMI_USB_DISK-0:0-part1 -> ../../sdb1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


========================== sda1/EFI/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------
search.fs_uuid b55c2f39-ed36-4270-92cb-0b41dffcc6c1 root hd0,gpt5 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

=========================== sda5/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  b55c2f39-ed36-4270-92cb-0b41dffcc6c1
else
  search --no-floppy --fs-uuid --set=root b55c2f39-ed36-4270-92cb-0b41dffcc6c1
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b55c2f39-ed36-4270-92cb-0b41dffcc6c1' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  b55c2f39-ed36-4270-92cb-0b41dffcc6c1
	else
	  search --no-floppy --fs-uuid --set=root b55c2f39-ed36-4270-92cb-0b41dffcc6c1
	fi
        linux	/boot/vmlinuz-5.3.0-28-generic root=UUID=b55c2f39-ed36-4270-92cb-0b41dffcc6c1 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-5.3.0-28-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-b55c2f39-ed36-4270-92cb-0b41dffcc6c1' {
	menuentry 'Ubuntu, avec Linux 5.3.0-28-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-28-generic-advanced-b55c2f39-ed36-4270-92cb-0b41dffcc6c1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  b55c2f39-ed36-4270-92cb-0b41dffcc6c1
		else
		  search --no-floppy --fs-uuid --set=root b55c2f39-ed36-4270-92cb-0b41dffcc6c1
		fi
		echo	'Chargement de Linux 5.3.0-28-generic…'
	        linux	/boot/vmlinuz-5.3.0-28-generic root=UUID=b55c2f39-ed36-4270-92cb-0b41dffcc6c1 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.3.0-28-generic
	}
	menuentry 'Ubuntu, with Linux 5.3.0-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-28-generic-recovery-b55c2f39-ed36-4270-92cb-0b41dffcc6c1' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  b55c2f39-ed36-4270-92cb-0b41dffcc6c1
		else
		  search --no-floppy --fs-uuid --set=root b55c2f39-ed36-4270-92cb-0b41dffcc6c1
		fi
		echo	'Chargement de Linux 5.3.0-28-generic…'
	        linux	/boot/vmlinuz-5.3.0-28-generic root=UUID=b55c2f39-ed36-4270-92cb-0b41dffcc6c1 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.3.0-28-generic
	}
	menuentry 'Ubuntu, avec Linux 5.0.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-23-generic-advanced-b55c2f39-ed36-4270-92cb-0b41dffcc6c1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  b55c2f39-ed36-4270-92cb-0b41dffcc6c1
		else
		  search --no-floppy --fs-uuid --set=root b55c2f39-ed36-4270-92cb-0b41dffcc6c1
		fi
		echo	'Chargement de Linux 5.0.0-23-generic…'
	        linux	/boot/vmlinuz-5.0.0-23-generic root=UUID=b55c2f39-ed36-4270-92cb-0b41dffcc6c1 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.0.0-23-generic
	}
	menuentry 'Ubuntu, with Linux 5.0.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-23-generic-recovery-b55c2f39-ed36-4270-92cb-0b41dffcc6c1' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  b55c2f39-ed36-4270-92cb-0b41dffcc6c1
		else
		  search --no-floppy --fs-uuid --set=root b55c2f39-ed36-4270-92cb-0b41dffcc6c1
		fi
		echo	'Chargement de Linux 5.0.0-23-generic…'
	        linux	/boot/vmlinuz-5.0.0-23-generic root=UUID=b55c2f39-ed36-4270-92cb-0b41dffcc6c1 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.0.0-23-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-D81E-6BF7' {
	insmod part_gpt
	insmod fat
	set root='hd0,gpt1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  D81E-6BF7
	else
	  search --no-floppy --fs-uuid --set=root D81E-6BF7
	fi
	chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda5/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda5 during installation
UUID=b55c2f39-ed36-4270-92cb-0b41dffcc6c1 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=D81E-6BF7  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sda6 during installation
UUID=5130aee5-e454-40d9-98b1-d2c31c7f21cb none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda5: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 423.191402435 = 454.398308352  boot/grub/grub.cfg                             3
 401.416011810 = 431.017160704  boot/vmlinuz-5.0.0-23-generic                  2
 402.080783844 = 431.730954240  boot/vmlinuz-5.3.0-28-generic                  1
 401.416011810 = 431.017160704  vmlinuz                                        2
 404.600711823 = 434.436706304  boot/initrd.img-5.0.0-23-generic               2
 404.899875641 = 434.757931008  boot/initrd.img-5.3.0-28-generic               2
 404.600711823 = 434.436706304  initrd.img                                     2
 404.600711823 = 434.436706304  initrd.img.old                                 2

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

set timeout=5
menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
	initrd	/casper/initrd
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
	initrd	/casper/initrd
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
	initrd	/casper/initrd
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  boot=casper integrity-check quiet splash ---
	initrd	/casper/initrd
}
--------------------------------------------------------------------------------

============================== sdb1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
DEFAULT loadconfig

LABEL loadconfig
  CONFIG /isolinux/isolinux.cfg
  APPEND /isolinux/
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1
            ?? = ??             ldlinux.sys                                    1

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/5842/mountinfo) leaked on lvs invocation. Parent PID 16375: bash
File descriptor 63 (pipe:[79646]) leaked on lvs invocation. Parent PID 16375: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20200128_2105 ===================
boot-info version : 4ppa66
boot-sav version : 4ppa66
boot-sav-extra version : 4ppa66
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 18.04.3 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
ls: cannot access '/home/usr/.config': No such file or directory
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount /dev/sda3 : Error code 13
mount -r /dev/sda3 /mnt/boot-sav/sda3
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount -r /dev/sda3 : Error code 13

=================== os-prober:
/dev/sda1@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
/dev/sda5:Ubuntu 18.04.3 LTS (18.04):Ubuntu:linux

=================== blkid:
/dev/sda1: LABEL="SYSTEM" UUID="D81E-6BF7" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="55aaff49-4afc-4eea-8700-2e54265ff20c"
/dev/sda3: LABEL="OS" UUID="5CEC2552EC2527AA" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="cddaa555-6a25-4d98-8bf0-3050e0a4740b"
/dev/sda4: LABEL="RECOVERY" UUID="D0F63246F6322D5A" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="ac1550ae-a30e-4391-a348-b157b3cf5720"
/dev/sda5: UUID="b55c2f39-ed36-4270-92cb-0b41dffcc6c1" TYPE="ext4" PARTUUID="541cf48a-1b84-4195-8601-6917114d6af8"
/dev/sdb1: LABEL="UBUNTU 18_0" UUID="C0CD-7D03" TYPE="vfat" PARTUUID="001f7539-01"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda6: UUID="5130aee5-e454-40d9-98b1-d2c31c7f21cb" TYPE="swap" PARTUUID="24ad557a-54ae-4da3-9f21-a158f7dd578c"
/dev/loop8: TYPE="squashfs"
/dev/sda2: PARTLABEL="Microsoft reserved partition" PARTUUID="84ba056c-5a02-42d4-b7f5-45b62c9347e8"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount /dev/sda3 : Error code 13
mount -r /dev/sda3 /mnt/boot-sav/sda3
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount -r /dev/sda3 : Error code 13
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/fbx64.efi

=================== sda5/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 Jan 28 15:33 grub.d
total 80
-rwxr-xr-x 1 root root 10046 Mar 18  2019 00_header
-rwxr-xr-x 1 root root  6258 Mar 18  2019 05_debian_theme
-rwxr-xr-x 1 root root 12693 Mar 18  2019 10_linux
-rwxr-xr-x 1 root root 11298 Mar 18  2019 20_linux_xen
-rwxr-xr-x 1 root root  1992 Jan 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 Mar 18  2019 30_os-prober
-rwxr-xr-x 1 root root  1418 Mar 18  2019 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Mar 18  2019 40_custom
-rwxr-xr-x 1 root root   216 Mar 18  2019 41_custom
-rw-r--r-- 1 root root   483 Mar 18  2019 README




=================== sda5/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda5: UUID=D81E-6BF7   (sda1)

=================== efibootmgr -v
BootCurrent: 0006
Timeout: 1 seconds
BootOrder: 0000,0006,0005
Boot0000* ubuntu	HD(1,GPT,55aaff49-4afc-4eea-8700-2e54265ff20c,0x800,0x82000)/File(EFIUBUNTUSHIMX64.EFI)
Boot0005  Windows Boot Manager	HD(1,GPT,55aaff49-4afc-4eea-8700-2e54265ff20c,0x800,0x82000)/File(EFIMICROSOFTBOOTBOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0006* UEFI: SMI USB DISK 1100, Partition 1	PciRoot(0x0)/Pci(0x14,0x0)/USB(0,0)/HD(1,MBR,0x1f7539,0x800,0xf00000)..BO

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
No EFI in dmseg.
SecureBoot enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sda1.
sda3	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda3.
sda4	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda4.
sda5	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-pc grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda5.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:512GB:scsi:512:4096:gpt:ATA HFS512G39TND-N21:;
1:1049kB:274MB:273MB:fat32:EFI system partition:boot, esp;
2:274MB:290MB:16.8MB::Microsoft reserved partition:msftres;
3:290MB:428GB:428GB:ntfs:Basic data partition:msftdata;
5:428GB:510GB:81.8GB:ext4::;
6:510GB:511GB:999MB:linux-swap(v1)::;
4:511GB:512GB:839MB:ntfs:Basic data partition:hidden, diag;

BYT;
/dev/sdb:8054MB:scsi:512:512:msdos:SMI USB DISK:;
1:1049kB:8054MB:8053MB:fat32::boot, lba;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop0 loop squashfs   1.9G
loop1 loop squashfs  88.5M
loop2 loop squashfs  54.4M
loop3 loop squashfs  42.8M
loop4 loop squashfs 149.9M
loop5 loop squashfs     4M
loop6 loop squashfs  14.8M
loop7 loop squashfs  1008K
loop8 loop squashfs   3.7M
sda   disk            477G
sda1  part vfat       260M SYSTEM
sda2  part             16M
sda3  part ntfs     398.8G OS
sda4  part ntfs       800M RECOVERY
sda5  part ext4      76.2G
sda6  part swap       953M
sdb   disk            7.5G
sdb1  part vfat       7.5G UBUNTU 18_0

KNAME ROTA RO RM STATE   MOUNTPOINT
loop0    1  1  0         /rofs
loop1    1  1  0         /snap/core/7270
loop2    1  1  0         /snap/core18/1066
loop3    1  1  0         /snap/gtk-common-themes/1313
loop4    1  1  0         /snap/gnome-3-28-1804/67
loop5    1  1  0         /snap/gnome-calculator/406
loop6    1  1  0         /snap/gnome-characters/296
loop7    1  1  0         /snap/gnome-logs/61
loop8    1  1  0         /snap/gnome-system-monitor/100
sda      0  0  0 running
sda1     0  0  0         /mnt/boot-sav/sda1
sda2     0  0  0
sda3     0  0  0
sda4     0  0  0         /mnt/boot-sav/sda4
sda5     0  0  0         /mnt/boot-sav/sda5
sda6     0  0  0         [SWAP]
sdb      1  0  1 running
sdb1     1  0  1         /cdrom


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=8115040k,nr_inodes=2028760,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=1627960k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14876)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=1627956k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_7270.snap on /snap/core/7270 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_1066.snap on /snap/core18/1066 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_1313.snap on /snap/gtk-common-themes/1313 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_67.snap on /snap/gnome-3-28-1804/67 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_406.snap on /snap/gnome-calculator/406 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_296.snap on /snap/gnome-characters/296 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_61.snap on /snap/gnome-logs/61 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_100.snap on /snap/gnome-system-monitor/100 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw,relatime)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered):  acpi_thermal_rel autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 ecryptfs fb0 fd full fuse gpiochip0 hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-13 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 iio:device0 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout tpm0 tpmrm0 udmabuf uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 video1 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 08 fe 1b  |.X.MSDOS5.0.....|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 20 08 00 01 02 00 00  00 00 00 00 02 00 00 00  |. ..............|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 f7 6b 1e d8 4e  4f 20 4e 41 4d 45 20 20  |..).k..NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 56 40 88 4e 02 8a 56  |{......|.V@.N..V|
00000070  40 b4 41 bb aa 55 cd 13  72 10 81 fb 55 aa 75 0a  |@.A..U..r...U.u.|
00000080  f6 c1 01 74 05 fe 46 02  eb 2d 8a 56 40 b4 08 cd  |...t..F..-.V@...|
00000090  13 73 05 b9 ff ff 8a f1  66 0f b6 c6 40 66 0f b6  |.s......f...@f..|
000000a0  d1 80 e2 3f f7 e2 86 cd  c0 ed 06 41 66 0f b7 c9  |...?.......Af...|
000000b0  66 f7 e1 66 89 46 f8 83  7e 16 00 75 39 83 7e 2a  |f..f.F..~..u9.~*|
000000c0  00 77 33 66 8b 46 1c 66  83 c0 0c bb 00 80 b9 01  |.w3f.F.f........|
000000d0  00 e8 2c 00 e9 a8 03 a1  f8 7d 80 c4 7c 8b f0 ac  |..,......}..|...|
000000e0  84 c0 74 17 3c ff 74 09  b4 0e bb 07 00 cd 10 eb  |..t.<.t.........|
000000f0  ee a1 fa 7d eb e4 a1 7d  80 eb df 98 cd 16 cd 19  |...}...}........|
00000100  66 60 80 7e 02 00 0f 84  20 00 66 6a 00 66 50 06  |f`.~.... .fj.fP.|
00000110  53 66 68 10 00 01 00 b4  42 8a 56 40 8b f4 cd 13  |Sfh.....B.V@....|
00000120  66 58 66 58 66 58 66 58  eb 33 66 3b 46 f8 72 03  |fXfXfXfX.3f;F.r.|
00000130  f9 eb 2a 66 33 d2 66 0f  b7 4e 18 66 f7 f1 fe c2  |..*f3.f..N.f....|
00000140  8a ca 66 8b d0 66 c1 ea  10 f7 76 1a 86 d6 8a 56  |..f..f....v....V|
00000150  40 8a e8 c0 e4 06 0a cc  b8 01 02 cd 13 66 61 0f  |@............fa.|
00000160  82 74 ff 81 c3 00 02 66  40 49 75 94 c3 42 4f 4f  |.t.....f@Iu..BOO|
00000170  54 4d 47 52 20 20 20 20  00 00 00 00 00 00 00 00  |TMGR    ........|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 44 69  |..............Di|
000001b0  73 6b 20 65 72 72 6f 72  ff 0d 0a 50 72 65 73 73  |sk error...Press|
000001c0  20 61 6e 79 20 6b 65 79  20 74 6f 20 72 65 73 74  | any key to rest|
000001d0  61 72 74 0d 0a 00 00 00  00 00 00 00 00 00 00 00  |art.............|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  ac 01 b9 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda3
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 a8 08 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff a7 d7 31 00 00 00 00  |...........1....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  aa 27 25 ec 52 25 ec 5c  |.........'%.R%.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda4
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 10 85 3b  |........?......;|
00000020  00 00 00 00 80 00 80 00  ff ff 18 00 00 00 00 00  |................|
00000030  aa 0a 01 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  5a 2d 32 f6 46 32 f6 d0  |........Z-2.F2..|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  7.8G     0  7.8G   0% /dev
tmpfs          tmpfs     1.6G  1.9M  1.6G   1% /run
/dev/sdb1      vfat      7.5G  2.0G  5.6G  26% /cdrom
/dev/loop0     squashfs  1.9G  1.9G     0 100% /rofs
/cow           overlay   7.8G  471M  7.4G   6% /
tmpfs          tmpfs     7.8G   41M  7.8G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     7.8G     0  7.8G   0% /sys/fs/cgroup
tmpfs          tmpfs     7.8G  4.0K  7.8G   1% /tmp
tmpfs          tmpfs     1.6G   60K  1.6G   1% /run/user/999
/dev/loop1     squashfs   89M   89M     0 100% /snap/core/7270
/dev/loop2     squashfs   55M   55M     0 100% /snap/core18/1066
/dev/loop3     squashfs   43M   43M     0 100% /snap/gtk-common-themes/1313
/dev/loop4     squashfs  150M  150M     0 100% /snap/gnome-3-28-1804/67
/dev/loop5     squashfs  4.2M  4.2M     0 100% /snap/gnome-calculator/406
/dev/loop6     squashfs   15M   15M     0 100% /snap/gnome-characters/296
/dev/loop7     squashfs  1.0M  1.0M     0 100% /snap/gnome-logs/61
/dev/loop8     squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/100
/dev/sda1      vfat      256M   32M  225M  13% /mnt/boot-sav/sda1
/dev/sda4      fuseblk   800M  405M  396M  51% /mnt/boot-sav/sda4
/dev/sda5      ext4       75G  6.8G   64G  10% /mnt/boot-sav/sda5

=================== fdisk -l:
Disk /dev/loop0: 1.9 GiB, 1987817472 bytes, 3882456 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 88.5 MiB, 92778496 bytes, 181208 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 54.4 MiB, 57069568 bytes, 111464 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 42.8 MiB, 44879872 bytes, 87656 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 149.9 MiB, 157184000 bytes, 307000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 4 MiB, 4218880 bytes, 8240 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 14.8 MiB, 15462400 bytes, 30200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 1008 KiB, 1032192 bytes, 2016 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 477 GiB, 512110190592 bytes, 1000215216 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 4025E3BC-1061-4800-AE19-9BA34B837DA5

Device         Start        End   Sectors   Size Type
/dev/sda1       2048     534527    532480   260M EFI System
/dev/sda2     534528     567295     32768    16M Microsoft reserved
/dev/sda3     567296  836784127 836216832 398.8G Microsoft basic data
/dev/sda4  998576128 1000214527   1638400   800M Windows recovery environment
/dev/sda5  836784128  996624383 159840256  76.2G Linux filesystem
/dev/sda6  996624384  998576127   1951744   953M Linux swap

Partition table entries are not in disk order.


Disk /dev/sdb: 7.5 GiB, 8054112256 bytes, 15730688 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x001f7539

Device     Boot Start      End  Sectors  Size Id Type
/dev/sdb1  *     2048 15730687 15728640  7.5G  c W95 FAT32 (LBA)


Disk /dev/loop8: 3.7 MiB, 3825664 bytes, 7472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda5, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file


=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sda1/efi/.../grub*.efi file!

If your computer reboots directly into Windows, try to change the boot order in your BIOS.
If your BIOS does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\...\grub*.efi


=================== User settings
The settings chosen by the user will not act on the boot.

Dernière modification par malbo (Le 29/01/2020, à 08:10)

Hors ligne