#1 Le 18/03/2020, à 20:36
- Guiriden
[Résolu] Désactivation intempestive de la souris USB
Bonsoir à vous ;
J'ai sur mon ordi un pb récurent auquel je ne me suis jamais attelé et que les circonstances (confinement !) me laissent le temps de traiter .
Il s'agit de la désactivation intempestive de ma souris raccordée en filaire sur port USB .
Je m'étais un peu habitué au pb , qui disparaissait suite à un reboot ...
J'ai tout de même un petit doute sur le démarrage correct de tout l'environnement . En effet, le dmesg laisse apparaître quelques erreurs .
Tout d'abord celle-ci :
[ 0.859132] ERROR: Unable to locate IOAPIC for GSI 56et ensuite celles-ci :
[ 5.966940] usb 1-2: device not accepting address 6, error -71
[ 6.282902] usb 1-2: new high-speed USB device number 7 using ehci-pci
[ 6.818869] usb 1-2: device not accepting address 7, error -71Voici le dmesg dans son entier :
xx@pc-yy:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-145-generic (buildd@lcy01-amd64-027) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10) ) #171-Ubuntu SMP Tue Mar 26 12:43:40 UTC 2019 (Ubuntu 4.4.0-145.171-generic 4.4.176)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-145-generic root=UUID=4629d1ac-7daa-49e9-a167-e0547bb3e62e ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] tseg: 009f000000
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c5d5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c5d6000-0x000000009c605fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009c606000-0x000000009c8d9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c8da000-0x000000009c9a6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009c9a7000-0x000000009e166fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e167000-0x000000009e1c3fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009e1c4000-0x000000009e1c4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e1c5000-0x000000009e3cafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e3cb000-0x000000009e84ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e850000-0x000000009efe0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009efe1000-0x000000009effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x9c95e000 ACPI 2.0=0x9c95e000 SMBIOS=0xf04c0 MPS=0xfd400
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XM-D3H, BIOS F5 01/09/2014
[ 0.000000] Kernel/User page tables isolation: disabled
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xa0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6d0-0x000fd6df] mapped at [ffff8800000fd6d0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[ 0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[ 0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[ 0.000000] BRK [0x02211000, 0x02211fff] PGTABLE
[ 0.000000] BRK [0x02212000, 0x02212fff] PGTABLE
[ 0.000000] BRK [0x02213000, 0x02213fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3331a000-0x35984fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009C95E000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009C95E080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009C9647A0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[ 0.000000] ACPI: DSDT 0x000000009C95E1A0 006600 (v02 ALASKA A M I 00000088 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009C99C080 000040
[ 0.000000] ACPI: APIC 0x000000009C9648B0 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009C964930 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009C964978 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000009C9649B8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: IVRS 0x000000009C9649F0 000078 (v02 AMD BANTRY 00000001 AMD 00000000)
[ 0.000000] ACPI: BGRT 0x000000009C964A68 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000009C964AA0 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009C965640 00033B (v02 AMD BANTRY 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x000000009C965980 000550 (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009C965ED0 0013A4 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x000000009C967278 001120 (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13eff5000-0x13eff9fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009c5d5fff]
[ 0.000000] node 0: [mem 0x000000009c606000-0x000000009c8d9fff]
[ 0.000000] node 0: [mem 0x000000009e1c4000-0x000000009e1c4fff]
[ 0.000000] node 0: [mem 0x000000009e3cb000-0x000000009e84ffff]
[ 0.000000] node 0: [mem 0x000000009efe1000-0x000000009effffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[ 0.000000] On node 0 totalpages: 900334
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9974 pages used for memmap
[ 0.000000] DMA32 zone: 638287 pages, LIFO batch:31
[ 0.000000] Normal zone: 4032 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c5d6000-0x9c605fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c8da000-0x9c9a6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c9a7000-0x9e166fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e167000-0x9e1c3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e1c5000-0x9e3cafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e850000-0x9efe0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x9f000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff88013ec00000 s99480 r8192 d31592 u524288
[ 0.000000] pcpu-alloc: s99480 r8192 d31592 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 886238
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-145-generic root=UUID=4629d1ac-7daa-49e9-a167-e0547bb3e62e ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3228580K/3601336K available (8608K kernel code, 1333K rwdata, 4008K rodata, 1484K init, 1284K bss, 372756K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1000 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3094.629 MHz processor
[ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 6189.25 BogoMIPS (lpj=12378516)
[ 0.000031] pid_max: default: 32768 minimum: 301
[ 0.000039] ACPI: Core revision 20150930
[ 0.004132] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.004818] Security Framework initialized
[ 0.004822] Yama: becoming mindful.
[ 0.004839] AppArmor: AppArmor initialized
[ 0.005079] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006188] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006706] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.006715] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.006928] Initializing cgroup subsys io
[ 0.006936] Initializing cgroup subsys memory
[ 0.006946] Initializing cgroup subsys devices
[ 0.006951] Initializing cgroup subsys freezer
[ 0.006955] Initializing cgroup subsys net_cls
[ 0.006960] Initializing cgroup subsys perf_event
[ 0.006964] Initializing cgroup subsys net_prio
[ 0.006969] Initializing cgroup subsys hugetlb
[ 0.006973] Initializing cgroup subsys pids
[ 0.006996] mce: CPU supports 7 MCE banks
[ 0.007005] LVT offset 1 assigned for vector 0xf9
[ 0.007013] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.007016] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.007020] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.007023] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.007029] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.007400] Freeing SMP alternatives memory: 36K
[ 0.013858] ftrace: allocating 32283 entries in 127 pages
[ 0.032447] smpboot: APIC(10) Converting physical 1 to logical package 0
[ 0.032454] smpboot: Max logical packages: 2
[ 0.115108] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.259274] smpboot: CPU0: AMD A8-7600 Radeon R7, 10 Compute Cores 4C+6G (family: 0x15, model: 0x30, stepping: 0x1)
[ 0.259294] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.259302] ... version: 0
[ 0.259305] ... bit width: 48
[ 0.259307] ... generic registers: 6
[ 0.259310] ... value mask: 0000ffffffffffff
[ 0.259313] ... max period: 00007fffffffffff
[ 0.259316] ... fixed-purpose events: 0
[ 0.259319] ... event mask: 000000000000003f
[ 0.260085] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.260179] x86: Booting SMP configuration:
[ 0.260183] .... node #0, CPUs: #1 #2 #3
[ 0.267116] x86: Booted up 1 node, 4 CPUs
[ 0.267124] smpboot: Total of 4 processors activated (24757.03 BogoMIPS)
[ 0.267955] devtmpfs: initialized
[ 0.270080] evm: security.selinux
[ 0.270083] evm: security.SMACK64
[ 0.270086] evm: security.SMACK64EXEC
[ 0.270089] evm: security.SMACK64TRANSMUTE
[ 0.270092] evm: security.SMACK64MMAP
[ 0.270094] evm: security.ima
[ 0.270097] evm: security.capability
[ 0.270264] PM: Registering ACPI NVS region [mem 0x9c8da000-0x9c9a6fff] (839680 bytes)
[ 0.270279] PM: Registering ACPI NVS region [mem 0x9e1c5000-0x9e3cafff] (2121728 bytes)
[ 0.270374] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.270390] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.270492] pinctrl core: initialized pinctrl subsystem
[ 0.270658] RTC time: 10:44:02, date: 03/18/20
[ 0.270787] NET: Registered protocol family 16
[ 0.279300] cpuidle: using governor ladder
[ 0.285029] cpuidle: using governor menu
[ 0.285055] PCCT header not found.
[ 0.285250] ACPI: bus type PCI registered
[ 0.285255] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.285407] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.285414] PCI: not using MMCONFIG
[ 0.285417] PCI: Using configuration type 1 for base access
[ 0.285420] PCI: Using configuration type 1 for extended access
[ 0.293696] ACPI: Added _OSI(Module Device)
[ 0.293704] ACPI: Added _OSI(Processor Device)
[ 0.293707] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.293711] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.295493] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.298380] ACPI: Interpreter enabled
[ 0.298402] ACPI: (supports S0 S3 S4 S5)
[ 0.298405] ACPI: Using IOAPIC for interrupt routing
[ 0.298568] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.298604] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.298620] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.299043] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.299155] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.299273] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.304255] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.304265] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.304439] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.304750] PCI host bridge to bus 0000:00
[ 0.304755] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.304759] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.304763] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.304767] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.304772] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.304778] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.304783] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.304789] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.304798] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
[ 0.304920] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
[ 0.305043] pci 0000:00:01.0: [1002:1313] type 00 class 0x030000
[ 0.305058] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.305065] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 0.305070] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.305075] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
[ 0.305080] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
[ 0.305099] pci 0000:00:01.0: supports D1 D2
[ 0.305101] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.305171] pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
[ 0.305185] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
[ 0.305211] pci 0000:00:01.1: supports D1 D2
[ 0.305331] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
[ 0.305436] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
[ 0.305509] pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
[ 0.305550] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.305681] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
[ 0.305809] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.305844] pci 0000:00:10.0: reg 0x10: [mem 0xfeb6a000-0xfeb6bfff 64bit]
[ 0.305924] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.305967] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.306042] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[ 0.306077] pci 0000:00:10.1: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
[ 0.306150] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.306194] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.306267] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.306289] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.306298] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.306306] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.306314] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.306322] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.306330] pci 0000:00:11.0: reg 0x24: [mem 0xfeb71000-0xfeb717ff]
[ 0.306443] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.306456] pci 0000:00:12.0: reg 0x10: [mem 0xfeb70000-0xfeb70fff]
[ 0.306530] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.306599] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.306620] pci 0000:00:12.2: reg 0x10: [mem 0xfeb6f000-0xfeb6f0ff]
[ 0.306677] pci 0000:00:12.2: supports D1 D2
[ 0.306679] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306714] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.306784] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.306797] pci 0000:00:13.0: reg 0x10: [mem 0xfeb6e000-0xfeb6efff]
[ 0.306871] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.306941] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.306962] pci 0000:00:13.2: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
[ 0.307019] pci 0000:00:13.2: supports D1 D2
[ 0.307020] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.307054] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.307131] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.307276] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.307298] pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
[ 0.307346] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.307381] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.307447] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.307589] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.307647] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.307713] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.307726] pci 0000:00:14.5: reg 0x10: [mem 0xfeb6c000-0xfeb6cfff]
[ 0.307801] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.307868] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
[ 0.307931] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
[ 0.307992] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
[ 0.308053] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
[ 0.308118] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
[ 0.308183] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
[ 0.308352] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.308381] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.308402] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
[ 0.308416] pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
[ 0.308468] pci 0000:01:00.0: supports D1 D2
[ 0.308470] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.315300] pci 0000:00:03.1: PCI bridge to [bus 01]
[ 0.315312] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.315315] pci 0000:00:03.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.315320] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.315512] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.315523] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.315525] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.315527] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.315529] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.315530] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.315532] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.315534] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.316276] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316341] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316401] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316459] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316506] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316543] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316580] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316617] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.317006] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.317013] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.317024] vgaarb: loaded
[ 0.317027] vgaarb: bridge control possible 0000:00:01.0
[ 0.317271] SCSI subsystem initialized
[ 0.317349] libata version 3.00 loaded.
[ 0.317377] ACPI: bus type USB registered
[ 0.317397] usbcore: registered new interface driver usbfs
[ 0.317410] usbcore: registered new interface driver hub
[ 0.317434] usbcore: registered new device driver usb
[ 0.317661] PCI: Using ACPI for IRQ routing
[ 0.324477] PCI: pci_cache_line_size set to 64 bytes
[ 0.324531] e820: reserve RAM buffer [mem 0x9c5d6000-0x9fffffff]
[ 0.324533] e820: reserve RAM buffer [mem 0x9c8da000-0x9fffffff]
[ 0.324534] e820: reserve RAM buffer [mem 0x9e1c5000-0x9fffffff]
[ 0.324536] e820: reserve RAM buffer [mem 0x9e850000-0x9fffffff]
[ 0.324537] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[ 0.324538] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 0.324668] NetLabel: Initializing
[ 0.324674] NetLabel: domain hash size = 128
[ 0.324676] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.324690] NetLabel: unlabeled traffic allowed by default
[ 0.324939] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.324946] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.327142] clocksource: Switched to clocksource hpet
[ 0.333922] AppArmor: AppArmor Filesystem Enabled
[ 0.334003] pnp: PnP ACPI init
[ 0.334132] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.334140] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.334224] system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.334230] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334307] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.334314] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334476] system 00:03: [io 0x0220-0x0227] has been reserved
[ 0.334481] system 00:03: [io 0x0228-0x0237] has been reserved
[ 0.334485] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 0.334491] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334805] pnp 00:04: [dma 0 disabled]
[ 0.334852] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.335163] pnp 00:05: [dma 0 disabled]
[ 0.335266] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.335315] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.335340] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.335510] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.335517] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.335798] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.335804] system 00:09: [io 0x040b] has been reserved
[ 0.335809] system 00:09: [io 0x04d6] has been reserved
[ 0.335813] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.335816] system 00:09: [io 0x0c14] has been reserved
[ 0.335820] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.335824] system 00:09: [io 0x0c52] has been reserved
[ 0.335828] system 00:09: [io 0x0c6c] has been reserved
[ 0.335832] system 00:09: [io 0x0c6f] has been reserved
[ 0.335835] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.335839] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.335843] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.335847] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.335851] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.335855] system 00:09: [io 0x0800-0x089f] has been reserved
[ 0.335859] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.335863] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.335866] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.335871] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.335876] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.335880] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.335885] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.335889] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.335894] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.335899] system 00:09: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.335903] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.335908] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.336121] pnp: PnP ACPI: found 10 devices
[ 0.343441] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.343477] pci 0000:00:03.1: PCI bridge to [bus 01]
[ 0.343483] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.343489] pci 0000:00:03.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.343494] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.343503] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.343517] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.343519] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.343521] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.343522] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.343524] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.343526] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.343527] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.343529] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.343531] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.343532] pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.343534] pci_bus 0000:02: resource 4 [io 0x0000-0x03af window]
[ 0.343536] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.343538] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df window]
[ 0.343539] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff window]
[ 0.343541] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.343542] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.343544] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.343582] NET: Registered protocol family 2
[ 0.343761] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.343853] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.343997] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.344049] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.344070] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.344158] NET: Registered protocol family 1
[ 0.344183] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.345517] PCI: CLS 64 bytes, default 64
[ 0.345577] Unpacking initramfs...
[ 0.858837] Freeing initrd memory: 39340K
[ 0.858906] AMD-Vi: IOMMU performance counters supported
[ 0.858920] AMD-Vi: Applying ATS write check workaround for IOMMU at 0000:00:00.2
[ 0.859132] ERROR: Unable to locate IOAPIC for GSI 56
[ 0.859137] pci 0000:00:00.2: PCI INT A: failed to register GSI
[ 0.859515] iommu: Adding device 0000:00:00.0 to group 0
[ 0.859875] iommu: Adding device 0000:00:01.0 to group 1
[ 0.859895] iommu: Using direct mapping for device 0000:00:01.0
[ 0.859919] iommu: Adding device 0000:00:01.1 to group 1
[ 0.860222] iommu: Adding device 0000:00:02.0 to group 2
[ 0.860560] iommu: Adding device 0000:00:03.0 to group 3
[ 0.860577] iommu: Adding device 0000:00:03.1 to group 3
[ 0.860916] iommu: Adding device 0000:00:04.0 to group 4
[ 0.861326] iommu: Adding device 0000:00:10.0 to group 5
[ 0.861408] iommu: Adding device 0000:00:10.1 to group 5
[ 0.861742] iommu: Adding device 0000:00:11.0 to group 6
[ 0.862086] iommu: Adding device 0000:00:12.0 to group 7
[ 0.862102] iommu: Adding device 0000:00:12.2 to group 7
[ 0.862449] iommu: Adding device 0000:00:13.0 to group 8
[ 0.862466] iommu: Adding device 0000:00:13.2 to group 8
[ 0.862816] iommu: Adding device 0000:00:14.0 to group 9
[ 0.862833] iommu: Adding device 0000:00:14.2 to group 9
[ 0.862849] iommu: Adding device 0000:00:14.3 to group 9
[ 0.863279] iommu: Adding device 0000:00:14.4 to group 10
[ 0.863632] iommu: Adding device 0000:00:14.5 to group 11
[ 0.864006] iommu: Adding device 0000:00:18.0 to group 12
[ 0.864025] iommu: Adding device 0000:00:18.1 to group 12
[ 0.864043] iommu: Adding device 0000:00:18.2 to group 12
[ 0.864060] iommu: Adding device 0000:00:18.3 to group 12
[ 0.864078] iommu: Adding device 0000:00:18.4 to group 12
[ 0.864102] iommu: Adding device 0000:00:18.5 to group 12
[ 0.864117] iommu: Adding device 0000:01:00.0 to group 3
[ 0.864560] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.864566] AMD-Vi: Extended features: PPR GT IA PC
[ 0.864572] AMD-Vi: Interrupt remapping enabled
[ 0.864901] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.866362] perf: AMD NB counters detected
[ 0.866556] LVT offset 0 assigned for vector 0x400
[ 0.866572] perf: AMD IBS detected (0x000001ff)
[ 0.866582] perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
[ 0.866702] Scanning for low memory corruption every 60 seconds
[ 0.867251] audit: initializing netlink subsys (disabled)
[ 0.867281] audit: type=2000 audit(1584528242.684:1): initialized
[ 0.867624] Initialise system trusted keyring
[ 0.867830] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.867835] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.869234] zbud: loaded
[ 0.869685] VFS: Disk quotas dquot_6.6.0
[ 0.869719] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.869982] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.870415] fuse init (API version 7.23)
[ 0.870572] Key type big_key registered
[ 0.870591] Allocating IMA MOK and blacklist keyrings.
[ 0.871252] Key type asymmetric registered
[ 0.871257] Asymmetric key parser 'x509' registered
[ 0.871292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.871372] io scheduler noop registered
[ 0.871382] io scheduler deadline registered (default)
[ 0.871440] io scheduler cfq registered
[ 0.871796] pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
[ 0.871803] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.871809] pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
[ 0.871816] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.871826] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.871871] efifb: probing for efifb
[ 0.871896] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000c00000, using 3072k, total 3072k
[ 0.871902] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.871905] efifb: scrolling: redraw
[ 0.871908] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.873518] Console: switching to colour frame buffer device 128x48
[ 0.874881] fb0: EFI VGA frame buffer device
[ 0.874983] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.875012] ACPI: Power Button [PWRB]
[ 0.875063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.875155] ACPI: Power Button [PWRF]
[ 0.875220] ACPI: acpi_idle registered with cpuidle
[ 0.875853] GHES: HEST is not enabled!
[ 0.876025] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.896486] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.898374] Linux agpgart interface v0.103
[ 0.901068] loop: module loaded
[ 0.901318] libphy: Fixed MDIO Bus: probed
[ 0.901336] tun: Universal TUN/TAP device driver, 1.6
[ 0.901353] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.901482] PPP generic driver version 2.4.2
[ 0.901597] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.901624] ehci-pci: EHCI PCI platform driver
[ 0.901819] QUIRK: Enable AMD PLL fix
[ 0.901846] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.901871] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.901899] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.901963] ehci-pci 0000:00:12.2: debug port 1
[ 0.902021] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6f000
[ 0.911309] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.911392] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.912072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.912742] usb usb1: Product: EHCI Host Controller
[ 0.913397] usb usb1: Manufacturer: Linux 4.4.0-145-generic ehci_hcd
[ 0.914053] usb usb1: SerialNumber: 0000:00:12.2
[ 0.914974] hub 1-0:1.0: USB hub found
[ 0.915719] hub 1-0:1.0: 5 ports detected
[ 0.916738] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.917396] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.918055] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.918781] ehci-pci 0000:00:13.2: debug port 1
[ 0.919548] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6d000
[ 0.931316] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.932044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.932709] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.933359] usb usb2: Product: EHCI Host Controller
[ 0.934002] usb usb2: Manufacturer: Linux 4.4.0-145-generic ehci_hcd
[ 0.934647] usb usb2: SerialNumber: 0000:00:13.2
[ 0.935704] hub 2-0:1.0: USB hub found
[ 0.936373] hub 2-0:1.0: 5 ports detected
[ 0.937243] ehci-platform: EHCI generic platform driver
[ 0.937882] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.938512] ohci-pci: OHCI PCI platform driver
[ 0.939385] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 0.940028] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.940759] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb70000
[ 0.999343] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.999973] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.000581] usb usb3: Product: OHCI PCI host controller
[ 1.001181] usb usb3: Manufacturer: Linux 4.4.0-145-generic ohci_hcd
[ 1.001779] usb usb3: SerialNumber: 0000:00:12.0
[ 1.002732] hub 3-0:1.0: USB hub found
[ 1.003404] hub 3-0:1.0: 5 ports detected
[ 1.004299] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.004888] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.005570] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6e000
[ 1.063334] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.063941] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.064534] usb usb4: Product: OHCI PCI host controller
[ 1.065122] usb usb4: Manufacturer: Linux 4.4.0-145-generic ohci_hcd
[ 1.065712] usb usb4: SerialNumber: 0000:00:13.0
[ 1.066585] hub 4-0:1.0: USB hub found
[ 1.067200] hub 4-0:1.0: 5 ports detected
[ 1.068119] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.068705] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 1.069317] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb6c000
[ 1.127326] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.127945] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.128541] usb usb5: Product: OHCI PCI host controller
[ 1.129126] usb usb5: Manufacturer: Linux 4.4.0-145-generic ohci_hcd
[ 1.129710] usb usb5: SerialNumber: 0000:00:14.5
[ 1.130583] hub 5-0:1.0: USB hub found
[ 1.131189] hub 5-0:1.0: 2 ports detected
[ 1.131952] ohci-platform: OHCI generic platform driver
[ 1.132555] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.133351] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.133945] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 1.134785] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 1.135650] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.136270] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.136871] usb usb6: Product: xHCI Host Controller
[ 1.137466] usb usb6: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[ 1.138066] usb usb6: SerialNumber: 0000:00:10.0
[ 1.138928] hub 6-0:1.0: USB hub found
[ 1.139612] hub 6-0:1.0: 2 ports detected
[ 1.140323] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.140916] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
[ 1.141598] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.142222] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.142831] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.143503] usb usb7: Product: xHCI Host Controller
[ 1.144126] usb usb7: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[ 1.144742] usb usb7: SerialNumber: 0000:00:10.0
[ 1.145604] hub 7-0:1.0: USB hub found
[ 1.146262] hub 7-0:1.0: 2 ports detected
[ 1.147160] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.147774] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
[ 1.148599] xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 1.149438] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.150048] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.150664] usb usb8: Product: xHCI Host Controller
[ 1.151329] usb usb8: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[ 1.151959] usb usb8: SerialNumber: 0000:00:10.1
[ 1.152840] hub 8-0:1.0: USB hub found
[ 1.153529] hub 8-0:1.0: 2 ports detected
[ 1.154284] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.154885] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
[ 1.155597] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.156242] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.156855] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.157476] usb usb9: Product: xHCI Host Controller
[ 1.158094] usb usb9: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[ 1.158715] usb usb9: SerialNumber: 0000:00:10.1
[ 1.159548] hub 9-0:1.0: USB hub found
[ 1.160247] hub 9-0:1.0: 2 ports detected
[ 1.161047] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.162320] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.162952] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.163898] mousedev: PS/2 mouse device common for all mice
[ 1.164932] rtc_cmos 00:07: RTC can wake from S4
[ 1.165867] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.166583] rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.167245] i2c /dev entries driver
[ 1.167937] device-mapper: uevent: version 1.0.3
[ 1.168755] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.169420] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.170054] EFI Variables Facility v0.08 2004-May-17
[ 1.176795] NET: Registered protocol family 10
[ 1.177924] NET: Registered protocol family 17
[ 1.178584] Key type dns_resolver registered
[ 1.179684] microcode: CPU0: patch_level=0x06003103
[ 1.180327] microcode: CPU1: patch_level=0x06003103
[ 1.180949] microcode: CPU2: patch_level=0x06003103
[ 1.181639] microcode: CPU3: patch_level=0x06003103
[ 1.182487] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.183332] registered taskstats version 1
[ 1.183949] Loading compiled-in X.509 certificates
[ 1.185249] Loaded X.509 cert 'Build time autogenerated kernel key: 766cb56454e39ea623681e1efb4bf4db48a2396c'
[ 1.185884] zswap: loaded using pool lzo/zbud
[ 1.189382] Key type trusted registered
[ 1.194860] Key type encrypted registered
[ 1.195576] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.196204] ima: No TPM chip found, activating TPM-bypass!
[ 1.196819] ima: Allocated hash algorithm: sha1
[ 1.197443] evm: HMAC attrs: 0x1
[ 1.198419] Magic number: 12:78:730
[ 1.199189] rtc_cmos 00:07: setting system clock to 2020-03-18 10:44:03 UTC (1584528243)
[ 1.200104] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.201060] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.201681] EDD information not available.
[ 1.202369] PM: Hibernation image not present or could not be loaded.
[ 1.203794] Freeing unused kernel memory: 1484K
[ 1.239296] Write protecting the kernel read-only data: 14336k
[ 1.240675] Freeing unused kernel memory: 1620K
[ 1.241666] Freeing unused kernel memory: 88K
[ 1.261796] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.262537] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.262754] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.262785] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.264440] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.265080] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.270413] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.271155] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.271759] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.272748] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.308683] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.313727] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.314442] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 1.315400] acpi device:02: registered as cooling_device4
[ 1.316170] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 1.328395] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.329830] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc900006e6000, 74:d4:35:b1:ed:c7, XID 0c900800 IRQ 37
[ 1.330567] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.331532] [drm] Initialized drm 1.1.0 20060810
[ 1.334470] ahci 0000:00:11.0: version 3.0
[ 1.334814] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x13 impl SATA mode
[ 1.335618] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.336377] ahci 0000:00:11.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
[ 1.339141] scsi host0: ahci
[ 1.340099] scsi host1: ahci
[ 1.341042] scsi host2: ahci
[ 1.342266] scsi host3: ahci
[ 1.343314] scsi host4: ahci
[ 1.344146] ata1: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71100 irq 38
[ 1.344918] ata2: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71180 irq 39
[ 1.345675] ata3: DUMMY
[ 1.346392] ata4: DUMMY
[ 1.347113] ata5: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71300 irq 42
[ 1.368508] [drm] radeon kernel modesetting enabled.
[ 1.372387] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.375991] Found CRAT image with size=1360
[ 1.376672] Parsing CRAT table with 1 nodes
[ 1.377318] Found CU entry in CRAT table with proximity_domain=0 caps=0
[ 1.377960] CU CPU: cores=4 id_base=16
[ 1.378589] Found CU entry in CRAT table with proximity_domain=0 caps=0
[ 1.379248] CU GPU: simds=32 id_base=-2147483648
[ 1.379892] Found memory entry in CRAT table with proximity_domain=0
[ 1.380717] Found memory entry in CRAT table with proximity_domain=0
[ 1.381360] Found cache entry in CRAT table with processor_id=16
[ 1.382000] Found cache entry in CRAT table with processor_id=16
[ 1.382613] Found cache entry in CRAT table with processor_id=16
[ 1.383243] Found cache entry in CRAT table with processor_id=17
[ 1.383859] Found cache entry in CRAT table with processor_id=18
[ 1.384466] Found cache entry in CRAT table with processor_id=18
[ 1.385039] Found cache entry in CRAT table with processor_id=18
[ 1.385611] Found cache entry in CRAT table with processor_id=19
[ 1.386164] Found TLB entry in CRAT table (not processing)
[ 1.386726] Found TLB entry in CRAT table (not processing)
[ 1.387317] Found TLB entry in CRAT table (not processing)
[ 1.387876] Found TLB entry in CRAT table (not processing)
[ 1.388430] Found TLB entry in CRAT table (not processing)
[ 1.388974] Found TLB entry in CRAT table (not processing)
[ 1.389518] Found TLB entry in CRAT table (not processing)
[ 1.390062] Found TLB entry in CRAT table (not processing)
[ 1.390584] Found TLB entry in CRAT table (not processing)
[ 1.391101] Found TLB entry in CRAT table (not processing)
[ 1.391601] Creating topology SYSFS entries
[ 1.392121] Finished initializing topology ret=0
[ 1.392735] kfd kfd: Initialized module
[ 1.393484] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 1.393487] fb: switching to radeondrmfb from EFI VGA
[ 1.393978] Console: switching to colour dummy device 80x25
[ 1.394677] [drm] initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1002:0x0123).
[ 1.394704] [drm] register mmio base: 0xFEB00000
[ 1.394708] [drm] register mmio size: 262144
[ 1.394717] [drm] doorbell mmio base: 0xD0000000
[ 1.394720] [drm] doorbell mmio size: 8388608
[ 1.394789] ATOM BIOS: 113
[ 1.394871] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 1.394879] radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF
[ 1.394891] [drm] Detected VRAM RAM=512M, BAR=256M
[ 1.394895] [drm] RAM width 128bits DDR
[ 1.394987] [TTM] Zone kernel: Available graphics memory: 1763834 kiB
[ 1.394993] [TTM] Initializing pool allocator
[ 1.395000] [TTM] Initializing DMA pool allocator
[ 1.395087] [drm] radeon: 512M of VRAM memory ready
[ 1.395092] [drm] radeon: 2048M of GTT memory ready.
[ 1.395113] [drm] Loading kaveri Microcode
[ 1.395243] [drm] Internal thermal controller without fan control
[ 1.396190] [drm] radeon: dpm initialized
[ 1.398340] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 1.398359] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 1.427152] [drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
[ 1.427300] radeon 0000:00:01.0: WB enabled
[ 1.427313] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88008f763c00
[ 1.427323] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff88008f763c04
[ 1.427333] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff88008f763c08
[ 1.427342] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88008f763c0c
[ 1.427351] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff88008f763c10
[ 1.427772] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90001036c98
[ 1.427937] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff88008f763c18
[ 1.427947] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff88008f763c1c
[ 1.427955] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.427960] [drm] Driver supports precise vblank timestamp query.
[ 1.428010] radeon 0000:00:01.0: radeon: using MSI.
[ 1.428043] [drm] radeon: irq initialized.
[ 1.429953] [drm] ring test on 0 succeeded in 3 usecs
[ 1.430034] [drm] ring test on 1 succeeded in 2 usecs
[ 1.430049] [drm] ring test on 2 succeeded in 2 usecs
[ 1.430180] [drm] ring test on 3 succeeded in 3 usecs
[ 1.430189] [drm] ring test on 4 succeeded in 3 usecs
[ 1.435147] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 1.463118] usb 8-2: new low-speed USB device number 2 using xhci_hcd
[ 1.475910] [drm] ring test on 5 succeeded in 1 usecs
[ 1.495796] [drm] UVD initialized successfully.
[ 1.535140] usb 4-2: new full-speed USB device number 2 using ohci-pci
[ 1.604373] usb 3-1: New USB device found, idVendor=046d, idProduct=c31c
[ 1.604385] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.604391] usb 3-1: Product: USB Keyboard
[ 1.604397] usb 3-1: Manufacturer: Logitech
[ 1.604990] [drm] ring test on 6 succeeded in 16 usecs
[ 1.605006] [drm] ring test on 7 succeeded in 4 usecs
[ 1.605010] [drm] VCE initialized successfully.
[ 1.606817] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.621546] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.625822] usb 8-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1.625834] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.625841] usb 8-2: Product: USB Optical Mouse
[ 1.625847] usb 8-2: Manufacturer: Logitech
[ 1.626059] usb 8-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.639323] usbcore: registered new interface driver usbhid
[ 1.639334] usbhid: USB HID core driver
[ 1.642020] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:046D:C31C.0001/input/input6
[ 1.695569] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.0-1/input0
[ 1.699478] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0002/input/input7
[ 1.755675] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.0-1/input1
[ 1.755881] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/0003:046D:C05A.0003/input/input8
[ 1.756080] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.1-2/input0
[ 1.839186] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.839225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.840062] ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[ 1.840069] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.840819] ata2.00: configured for UDMA/133
[ 1.841625] ata1.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[ 1.842493] ata1.00: configured for UDMA/100
[ 1.843159] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.844082] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB01 PQ: 0 ANSI: 5
[ 1.863081] tsc: Refined TSC clocksource calibration: 3094.475 MHz
[ 1.863086] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.863088] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.863104] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c9ae47356a, max_idle_ns: 440795281132 ns
[ 1.863306] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.863431] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.863759] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[ 1.864043] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.864059] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 1.864071] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.864136] sd 1:0:0:0: [sda] Write Protect is off
[ 1.864145] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.864194] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.891857] ata5.00: ATA-7: ST3320820AS, 3.AAD, max UDMA/133
[ 1.891869] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.904490] usb 4-2: New USB device found, idVendor=0a12, idProduct=0001
[ 1.904502] usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.904508] usb 4-2: Product: BT2.0
[ 1.907430] sda: sda1 sda2 sda3
[ 1.908108] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.950343] ata5.00: configured for UDMA/133
[ 1.950733] scsi 4:0:0:0: Direct-Access ATA ST3320820AS D PQ: 0 ANSI: 5
[ 1.951035] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 1.951120] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.951180] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.951229] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.951237] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.951281] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.989956] sdb: sdb1
[ 1.990484] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.085555] usb 1-2: New USB device found, idVendor=04a9, idProduct=1722
[ 2.085566] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.085572] usb 1-2: Product: MP220 series
[ 2.085578] usb 1-2: Manufacturer: Canon
[ 2.085584] usb 1-2: SerialNumber: 602496
[ 2.103198] [drm] ib test on ring 1 succeeded in 0 usecs
[ 2.217346] usb-storage 1-2:1.2: USB Mass Storage device detected
[ 2.217517] scsi host5: usb-storage 1-2:1.2
[ 2.217631] usbcore: registered new interface driver usb-storage
[ 2.219494] usbcore: registered new interface driver uas
[ 2.603260] [drm] ib test on ring 2 succeeded in 0 usecs
[ 2.603334] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.603415] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.863281] clocksource: Switched to clocksource tsc
[ 3.123215] [drm] ib test on ring 5 succeeded
[ 3.143725] [drm] ib test on ring 6 succeeded
[ 3.144355] [drm] ib test on ring 7 succeeded
[ 3.146044] [drm] Radeon Display Connectors
[ 3.146054] [drm] Connector 0:
[ 3.146059] [drm] DVI-D-1
[ 3.146063] [drm] HPD3
[ 3.146069] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 3.146076] [drm] Encoders:
[ 3.146080] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.146084] [drm] Connector 1:
[ 3.146088] [drm] HDMI-A-1
[ 3.146093] [drm] HPD1
[ 3.146097] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 3.146104] [drm] Encoders:
[ 3.146108] [drm] DFP1: INTERNAL_UNIPHY
[ 3.146113] [drm] Connector 2:
[ 3.146117] [drm] VGA-1
[ 3.146120] [drm] HPD2
[ 3.146125] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 3.146132] [drm] Encoders:
[ 3.146136] [drm] CRT1: INTERNAL_UNIPHY3
[ 3.146140] [drm] CRT1: NUTMEG
[ 3.217049] scsi 5:0:0:0: Direct-Access Canon MP220 series 1050 PQ: 0 ANSI: 2
[ 3.217505] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 3.223853] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 3.328153] [drm] fb mappable at 0xC0728000
[ 3.328163] [drm] vram apper at 0xC0000000
[ 3.328168] [drm] size 5324800
[ 3.328172] [drm] fb depth is 24
[ 3.328177] [drm] pitch is 5888
[ 3.328539] fbcon: radeondrmfb (fb0) is primary device
[ 3.451771] Console: switching to colour frame buffer device 180x56
[ 3.455566] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 3.462263] usb 1-2: USB disconnect, device number 3
[ 3.479618] ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 3.479683] ACPI Error: Method parse/execution failed [\_SB.PCI0.VGA.ATC0] (Node ffff88013a8c1028), AE_NOT_FOUND (20150930/psparse-542)
[ 3.479756] ACPI Error: Method parse/execution failed [\_SB.PCI0.VGA.ATCS] (Node ffff88013a8c1000), AE_NOT_FOUND (20150930/psparse-542)
[ 3.483485] kfd kfd: Allocated 3944480 bytes on gart for device(1002:1313)
[ 3.483606] kfd kfd: added device (1002:1313)
[ 3.483633] [drm] Initialized radeon 2.43.0 20080528 for 0000:00:01.0 on minor 0
[ 3.696473] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.742957] usb 1-2: new high-speed USB device number 4 using ehci-pci
[ 3.877170] usb 1-2: New USB device found, idVendor=04a9, idProduct=1722
[ 3.877214] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.877250] usb 1-2: Product: MP220 series
[ 3.877273] usb 1-2: Manufacturer: Canon
[ 3.877293] usb 1-2: SerialNumber: 602496
[ 3.878116] usb-storage 1-2:1.2: USB Mass Storage device detected
[ 3.878284] scsi host6: usb-storage 1-2:1.2
[ 4.025070] random: nonblocking pool is initialized
[ 4.547553] usb 1-2: USB disconnect, device number 4
[ 4.818904] usb 1-2: new high-speed USB device number 5 using ehci-pci
[ 4.953063] usb 1-2: New USB device found, idVendor=04a9, idProduct=1722
[ 4.954274] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.955466] usb 1-2: Product: MP220 series
[ 4.956628] usb 1-2: Manufacturer: Canon
[ 4.957787] usb 1-2: SerialNumber: 602496
[ 4.960551] usb-storage 1-2:1.2: USB Mass Storage device detected
[ 4.962081] scsi host7: usb-storage 1-2:1.2
[ 5.000788] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 5.003642] systemd[1]: Detected architecture x86-64.
[ 5.056440] systemd[1]: Set hostname to <pc-hascoet>.
[ 5.159016] usb 1-2: USB disconnect, device number 5
[ 5.430974] usb 1-2: new high-speed USB device number 6 using ehci-pci
[ 5.966940] usb 1-2: device not accepting address 6, error -71
[ 6.282902] usb 1-2: new high-speed USB device number 7 using ehci-pci
[ 6.818869] usb 1-2: device not accepting address 7, error -71
[ 6.820288] usb usb1-port2: attempt power cycle
[ 7.317377] systemd[1]: [/etc/systemd/system/snap-vlc-1397.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
[ 7.321900] systemd[1]: [/etc/systemd/system/snap-core-8689.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
[ 7.341910] systemd[1]: [/etc/systemd/system/snap-core-8592.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
[ 7.442843] usb 1-2: new high-speed USB device number 8 using ehci-pci
[ 7.454276] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.457377] systemd[1]: Listening on Journal Socket.
[ 7.460336] systemd[1]: Created slice System Slice.
[ 7.474978] systemd[1]: Mounting Debug File System...
[ 7.477938] systemd[1]: Listening on udev Kernel Socket.
[ 7.480945] systemd[1]: Listening on Journal Audit Socket.
[ 7.483860] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 7.487544] systemd[1]: Started Braille Device Support.
[ 7.490831] systemd[1]: Listening on udev Control Socket.
[ 7.493633] systemd[1]: Reached target Encrypted Volumes.
[ 7.496421] systemd[1]: Reached target User and Group Name Lookups.
[ 7.499220] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.502010] systemd[1]: Reached target Remote File Systems.
[ 7.504978] systemd[1]: Created slice User and Session Slice.
[ 7.523075] systemd[1]: Starting Set console keymap...
[ 7.526226] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.529956] systemd[1]: Started Read required files in advance.
[ 7.533914] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.537287] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.541317] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.545515] systemd[1]: Mounting Huge Pages File System...
[ 7.548689] systemd[1]: Reached target Slices.
[ 7.552515] systemd[1]: Starting Uncomplicated firewall...
[ 7.866834] usb 1-2: device not accepting address 8, error -71
[ 8.155039] systemd[1]: Starting Load Kernel Modules...
[ 8.158181] systemd[1]: Listening on Syslog Socket.
[ 8.161265] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.164401] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.168290] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.171674] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.175590] systemd[1]: Starting Journal Service...
[ 8.181033] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.182684] usb 1-2: new high-speed USB device number 9 using ehci-pci
[ 8.185699] systemd[1]: Mounted Huge Pages File System.
[ 8.188763] systemd[1]: Mounted Debug File System.
[ 8.192316] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 8.195841] systemd[1]: Started Uncomplicated firewall.
[ 8.251059] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.321022] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 8.323991] systemd[1]: Started Remount Root and Kernel File Systems.
[ 8.347091] systemd[1]: Starting udev Coldplug all Devices...
[ 8.351109] systemd[1]: Starting Load/Save Random Seed...
[ 8.539856] systemd[1]: Started Load/Save Random Seed.
[ 8.606725] usb 1-2: device not accepting address 9, error -71
[ 8.608317] usb usb1-port2: unable to enumerate USB device
[ 8.641801] systemd[1]: Started udev Coldplug all Devices.
[ 8.853747] lp: driver loaded but no devices found
[ 8.859005] ppdev: user-space parallel port driver
[ 8.870791] usb 3-2: new full-speed USB device number 3 using ohci-pci
[ 8.893728] parport_pc 00:05: reported by Plug and Play ACPI
[ 8.895358] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 8.978848] systemd[1]: Started Journal Service.
[ 8.994844] lp0: using parport0 (interrupt-driven).
[ 9.257827] usb 3-2: not running at top speed; connect to a high speed hub
[ 9.269821] usb 3-2: New USB device found, idVendor=04a9, idProduct=1722
[ 9.271215] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.272546] usb 3-2: Product: MP220 series
[ 9.273869] usb 3-2: Manufacturer: Canon
[ 9.275192] usb 3-2: SerialNumber: 602496
[ 9.278050] usb-storage 3-2:1.2: USB Mass Storage device detected
[ 9.279605] scsi host8: usb-storage 3-2:1.2
[ 9.426487] systemd-journald[281]: Received request to flush runtime journal from PID 1
[ 10.285816] scsi 8:0:0:0: Direct-Access Canon MP220 series 1050 PQ: 0 ANSI: 2
[ 10.286292] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 10.315856] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 13.701053] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.563623] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
[ 14.563757] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 14.601188] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 14.601811] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 14.601816] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.601819] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 14.601822] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 14.601825] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e
[ 14.601827] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 14.601830] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 14.601833] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 14.601836] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 14.601838] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
[ 14.615468] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 14.615594] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 14.615711] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 14.615802] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 14.738787] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 14.739011] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 14.751273] EDAC MC: Ver: 3.0.0
[ 14.775454] MCE: In-kernel MCE decoding enabled.
[ 14.941379] AMD64 EDAC driver v3.4.0
[ 14.941425] EDAC amd64: DRAM ECC disabled.
[ 14.941434] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 15.207555] AVX version of gcm_enc/dec engaged.
[ 15.207560] AES CTR mode by8 optimization enabled
[ 15.253254] Bluetooth: Core ver 2.21
[ 15.253277] NET: Registered protocol family 31
[ 15.253279] Bluetooth: HCI device and connection manager initialized
[ 15.253284] Bluetooth: HCI socket layer initialized
[ 15.253288] Bluetooth: L2CAP socket layer initialized
[ 15.253294] Bluetooth: SCO socket layer initialized
[ 15.395771] usbcore: registered new interface driver btusb
[ 15.936463] kvm: Nested Virtualization enabled
[ 15.936469] kvm: Nested Paging enabled
[ 17.185341] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 17.185378] usbcore: registered new interface driver usblp
[ 23.860781] Adding 3609596k swap on /dev/sda3. Priority:-1 extents:1 across:3609596k FS
[ 24.094434] audit: type=1400 audit(1584528266.392:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=855 comm="apparmor_parser"
[ 24.094449] audit: type=1400 audit(1584528266.392:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=855 comm="apparmor_parser"
[ 24.094457] audit: type=1400 audit(1584528266.392:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=855 comm="apparmor_parser"
[ 24.094464] audit: type=1400 audit(1584528266.392:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=855 comm="apparmor_parser"
[ 24.128055] audit: type=1400 audit(1584528266.428:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=854 comm="apparmor_parser"
[ 24.128068] audit: type=1400 audit(1584528266.428:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=854 comm="apparmor_parser"
[ 24.149378] audit: type=1400 audit(1584528266.444:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=858 comm="apparmor_parser"
[ 24.335464] audit: type=1400 audit(1584528266.632:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=856 comm="apparmor_parser"
[ 24.335478] audit: type=1400 audit(1584528266.632:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=856 comm="apparmor_parser"
[ 24.335485] audit: type=1400 audit(1584528266.632:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=856 comm="apparmor_parser"
[ 26.186272] cgroup: new mount options do not match the existing superblock, will be ignored
[ 36.983751] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 36.983756] Bluetooth: BNEP filters: protocol multicast
[ 36.983763] Bluetooth: BNEP socket layer initialized
[ 39.997581] usblp0: removed
[ 40.014359] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 40.774851] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.226547] r8169 0000:01:00.0 eth0: link down
[ 41.226549] r8169 0000:01:00.0 eth0: link down
[ 41.226620] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.849467] r8169 0000:01:00.0 eth0: link up
[ 42.849482] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 53.042540] Bluetooth: RFCOMM TTY layer initialized
[ 53.042554] Bluetooth: RFCOMM socket layer initialized
[ 53.042564] Bluetooth: RFCOMM ver 1.11
[ 4882.459427] r8169 0000:01:00.0 eth0: link down
[ 4886.032840] r8169 0000:01:00.0 eth0: link up
[ 4893.990054] r8169 0000:01:00.0 eth0: link down
[ 4915.245084] r8169 0000:01:00.0 eth0: link up
[ 7583.630998] usb 8-1: new high-speed USB device number 3 using xhci_hcd
[ 7583.762035] usb 8-1: New USB device found, idVendor=03f0, idProduct=0653
[ 7583.762044] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7583.762049] usb 8-1: Product: DeskJet 3700 series
[ 7583.762053] usb 8-1: Manufacturer: HP
[ 7583.762057] usb 8-1: SerialNumber: CN7193P0TV06GZ
[ 7583.766778] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 7589.171205] usblp0: removed
[ 7589.189722] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 7589.190735] usblp1: removed
[ 7589.196863] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 7764.465945] usblp0: removed
[ 7764.482231] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 7764.484435] usblp1: removed
[ 7796.513932] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 7861.785233] usblp0: removed
[ 7861.805641] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 7861.808019] usblp1: removed
[ 7876.583007] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 8255.161000] usblp0: removed
[ 8255.177408] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 8255.178913] usblp1: removed
[ 8274.951932] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 8871.822818] usblp0: removed
[ 8871.843500] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 8871.845566] usblp1: removed
[ 8902.876853] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 9151.550061] usblp0: removed
[ 9151.569644] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 9151.572657] usblp1: removed
[ 9166.095897] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 9293.206876] usblp0: removed
[ 9293.230252] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[ 9293.240017] usblp1: removed
[ 9307.508948] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 9968.126104] usblp0: removed
[ 9968.258865] usb 3-2: reset full-speed USB device number 3 using ohci-pci
[ 9968.662063] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[23266.231866] audit_printk_skb: 93 callbacks suppressed
[23266.231872] audit: type=1400 audit(1584551510.761:43): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/var/lib/snapd/desktop/applications/mimeinfo.cache" pid=8887 comm="evince" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[23279.429192] usblp0: removed
[23279.447122] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[23279.447373] usblp1: removed
[23288.207206] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[23529.876226] audit: type=1400 audit(1584551774.426:44): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/var/lib/snapd/desktop/applications/mimeinfo.cache" pid=9082 comm="evince" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[23595.286937] usblp0: removed
[23595.301088] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1722
[23595.301305] usblp1: removed
[23619.331082] usblp 8-1:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
xx@pc-yy:~$ Pour info, le BIOS est un GIGABYTE-UEFI DualBios F2A88XM-D3H/F5
Dernière modification par Guiriden (Le 26/09/2020, à 13:15)
Ubuntu 22.04 LTS / Ubuntu Touch sur Nexus5
Linux pc-xy 4.15.0-177-generic #186-Ubuntu SMP Thu Apr 14 20:23:07 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kaveri [Radeon R7 Graphics]
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XM-D3H, BIOS F5 01/09/2014
Hors ligne
#2 Le 19/03/2020, à 04:59
- moko138
Re : [Résolu] Désactivation intempestive de la souris USB
Attention à ne pas emmêler l'erreur -71 de protocole, qui concerne ton imprimante Canon Pixma et engendre ses déconnexions,
avec la "désactivation" de ta souris (désactivation dont, pour l'instant, je n'ai pas vu trace dans dmesg).
Je te propose de lire et appliquer ce message ./viewtopic.php?pid=21983080#p21983080 "[Tuto] Ma clef (ou autre support amovible) ne monte pas ou mal",
avec une nuance :
pas la peine de redémarrer, mais débranche ta souris avant de lancer la commande,
attends une 15aine de secondes,
puis lance la commande et rebranche la souris juste après.
...Et n'oublie pas de reporter ici le retour complet ! 
Dernière modification par moko138 (Le 19/03/2020, à 05:11)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 19/03/2020, à 13:17
- Guiriden
Re : [Résolu] Désactivation intempestive de la souris USB
@ moko
OK je n'avais pas fait le rapprochement avec mon pb sur la Canon . Comment pourrais-je le traiter ?
[ 3.742957] usb 1-2: new high-speed USB device number 4 using ehci-pci
[ 3.877170] usb 1-2: New USB device found, idVendor=04a9, idProduct=1722
[ 3.877214] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.877250] usb 1-2: Product: MP220 series
[ 3.877273] usb 1-2: Manufacturer: Canon
[ 3.877293] usb 1-2: SerialNumber: 602496
[ 3.878116] usb-storage 1-2:1.2: USB Mass Storage device detected
[ 3.878284] scsi host6: usb-storage 1-2:1.2
[ 4.025070] random: nonblocking pool is initialized
[ 4.547553] usb 1-2: USB disconnect, device number 4
[ 4.818904] usb 1-2: new high-speed USB device number 5 using ehci-pci
[ 4.953063] usb 1-2: New USB device found, idVendor=04a9, idProduct=1722
[ 4.954274] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.955466] usb 1-2: Product: MP220 series
[ 4.956628] usb 1-2: Manufacturer: Canon
[ 4.957787] usb 1-2: SerialNumber: 602496
[ 4.960551] usb-storage 1-2:1.2: USB Mass Storage device detected
[ 4.962081] scsi host7: usb-storage 1-2:1.2
[ 5.000788] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 5.003642] systemd[1]: Detected architecture x86-64.
[ 5.056440] systemd[1]: Set hostname to <pc-hascoet>.
[ 5.159016] usb 1-2: USB disconnect, device number 5
[ 5.430974] usb 1-2: new high-speed USB device number 6 using ehci-pci
[ 5.966940] usb 1-2: device not accepting address 6, error -71
[ 6.282902] usb 1-2: new high-speed USB device number 7 using ehci-pci
[ 6.818869] usb 1-2: device not accepting address 7, error -71
[ 6.820288] usb usb1-port2: attempt power cycleEt que dire de celle-là ?
[ 0.859132] ERROR: Unable to locate IOAPIC for GSI 56Sinon, je reviens ici lorsque j'aurais eu des retours pour mon pb de souris ...
Merci à toi
Ubuntu 22.04 LTS / Ubuntu Touch sur Nexus5
Linux pc-xy 4.15.0-177-generic #186-Ubuntu SMP Thu Apr 14 20:23:07 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kaveri [Radeon R7 Graphics]
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XM-D3H, BIOS F5 01/09/2014
Hors ligne
#4 Le 19/03/2020, à 13:34
- Guiriden
Re : [Résolu] Désactivation intempestive de la souris USB
@ moko :
Voici mon retour pour le pb désactivation intempestive de souris USB :
xx@pc-yy:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-145-generic (buildd@lcy01-amd64-027) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10) ) #171-Ubuntu SMP Tue Mar 26 12:43:40 UTC 2019 (Ubuntu 4.4.0-145.171-generic 4.4.176)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-145-generic root=UUID=4629d1ac-7daa-49e9-a167-e0547bb3e62e ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] tseg: 009f000000
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c5d5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c5d6000-0x000000009c605fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009c606000-0x000000009c8d9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c8da000-0x000000009c9a6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009c9a7000-0x000000009e166fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e167000-0x000000009e1c3fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009e1c4000-0x000000009e1c4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e1c5000-0x000000009e3cafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e3cb000-0x000000009e84ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e850000-0x000000009efe0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009efe1000-0x000000009effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x9c95e000 ACPI 2.0=0x9c95e000 SMBIOS=0xf04c0 MPS=0xfd400
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XM-D3H, BIOS F5 01/09/2014
[ 0.000000] Kernel/User page tables isolation: disabled
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xa0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6d0-0x000fd6df] mapped at [ffff8800000fd6d0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[ 0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[ 0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[ 0.000000] BRK [0x02211000, 0x02211fff] PGTABLE
[ 0.000000] BRK [0x02212000, 0x02212fff] PGTABLE
[ 0.000000] BRK [0x02213000, 0x02213fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3331a000-0x35984fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009C95E000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009C95E080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009C9647A0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[ 0.000000] ACPI: DSDT 0x000000009C95E1A0 006600 (v02 ALASKA A M I 00000088 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009C99C080 000040
[ 0.000000] ACPI: APIC 0x000000009C9648B0 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009C964930 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009C964978 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000009C9649B8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: IVRS 0x000000009C9649F0 000078 (v02 AMD BANTRY 00000001 AMD 00000000)
[ 0.000000] ACPI: BGRT 0x000000009C964A68 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000009C964AA0 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009C965640 00033B (v02 AMD BANTRY 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x000000009C965980 000550 (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009C965ED0 0013A4 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x000000009C967278 001120 (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13eff5000-0x13eff9fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009c5d5fff]
[ 0.000000] node 0: [mem 0x000000009c606000-0x000000009c8d9fff]
[ 0.000000] node 0: [mem 0x000000009e1c4000-0x000000009e1c4fff]
[ 0.000000] node 0: [mem 0x000000009e3cb000-0x000000009e84ffff]
[ 0.000000] node 0: [mem 0x000000009efe1000-0x000000009effffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[ 0.000000] On node 0 totalpages: 900334
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9974 pages used for memmap
[ 0.000000] DMA32 zone: 638287 pages, LIFO batch:31
[ 0.000000] Normal zone: 4032 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c5d6000-0x9c605fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c8da000-0x9c9a6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c9a7000-0x9e166fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e167000-0x9e1c3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e1c5000-0x9e3cafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e850000-0x9efe0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x9f000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff88013ec00000 s99480 r8192 d31592 u524288
[ 0.000000] pcpu-alloc: s99480 r8192 d31592 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 886238
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-145-generic root=UUID=4629d1ac-7daa-49e9-a167-e0547bb3e62e ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3228656K/3601336K available (8608K kernel code, 1333K rwdata, 4008K rodata, 1484K init, 1284K bss, 372680K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1000 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3094.599 MHz processor
[ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 6189.19 BogoMIPS (lpj=12378396)
[ 0.000031] pid_max: default: 32768 minimum: 301
[ 0.000038] ACPI: Core revision 20150930
[ 0.004145] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.004874] Security Framework initialized
[ 0.004879] Yama: becoming mindful.
[ 0.004895] AppArmor: AppArmor initialized
[ 0.005134] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006246] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006766] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.006776] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.006989] Initializing cgroup subsys io
[ 0.006997] Initializing cgroup subsys memory
[ 0.007007] Initializing cgroup subsys devices
[ 0.007012] Initializing cgroup subsys freezer
[ 0.007017] Initializing cgroup subsys net_cls
[ 0.007022] Initializing cgroup subsys perf_event
[ 0.007026] Initializing cgroup subsys net_prio
[ 0.007031] Initializing cgroup subsys hugetlb
[ 0.007035] Initializing cgroup subsys pids
[ 0.007058] mce: CPU supports 7 MCE banks
[ 0.007066] LVT offset 1 assigned for vector 0xf9
[ 0.007075] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.007078] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.007082] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.007085] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.007090] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.007464] Freeing SMP alternatives memory: 36K
[ 0.013901] ftrace: allocating 32283 entries in 127 pages
[ 0.032523] smpboot: APIC(10) Converting physical 1 to logical package 0
[ 0.032530] smpboot: Max logical packages: 2
[ 0.115168] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.259277] smpboot: CPU0: AMD A8-7600 Radeon R7, 10 Compute Cores 4C+6G (family: 0x15, model: 0x30, stepping: 0x1)
[ 0.259297] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.259304] ... version: 0
[ 0.259307] ... bit width: 48
[ 0.259310] ... generic registers: 6
[ 0.259313] ... value mask: 0000ffffffffffff
[ 0.259316] ... max period: 00007fffffffffff
[ 0.259318] ... fixed-purpose events: 0
[ 0.259321] ... event mask: 000000000000003f
[ 0.260087] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.260180] x86: Booting SMP configuration:
[ 0.260184] .... node #0, CPUs: #1 #2 #3
[ 0.267116] x86: Booted up 1 node, 4 CPUs
[ 0.267124] smpboot: Total of 4 processors activated (24756.79 BogoMIPS)
[ 0.267957] devtmpfs: initialized
[ 0.270083] evm: security.selinux
[ 0.270086] evm: security.SMACK64
[ 0.270089] evm: security.SMACK64EXEC
[ 0.270092] evm: security.SMACK64TRANSMUTE
[ 0.270095] evm: security.SMACK64MMAP
[ 0.270097] evm: security.ima
[ 0.270100] evm: security.capability
[ 0.270268] PM: Registering ACPI NVS region [mem 0x9c8da000-0x9c9a6fff] (839680 bytes)
[ 0.270283] PM: Registering ACPI NVS region [mem 0x9e1c5000-0x9e3cafff] (2121728 bytes)
[ 0.270381] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.270398] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.270500] pinctrl core: initialized pinctrl subsystem
[ 0.270667] RTC time: 11:47:29, date: 03/19/20
[ 0.270795] NET: Registered protocol family 16
[ 0.279303] cpuidle: using governor ladder
[ 0.285031] cpuidle: using governor menu
[ 0.285057] PCCT header not found.
[ 0.285252] ACPI: bus type PCI registered
[ 0.285256] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.285407] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.285414] PCI: not using MMCONFIG
[ 0.285417] PCI: Using configuration type 1 for base access
[ 0.285420] PCI: Using configuration type 1 for extended access
[ 0.293700] ACPI: Added _OSI(Module Device)
[ 0.293708] ACPI: Added _OSI(Processor Device)
[ 0.293711] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.293714] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.295494] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.298386] ACPI: Interpreter enabled
[ 0.298408] ACPI: (supports S0 S3 S4 S5)
[ 0.298411] ACPI: Using IOAPIC for interrupt routing
[ 0.298575] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.298611] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.298627] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.299050] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.299162] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.299282] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.304283] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.304293] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.304469] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.304784] PCI host bridge to bus 0000:00
[ 0.304789] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.304793] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.304798] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.304801] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.304807] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.304812] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.304818] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.304823] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.304832] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
[ 0.304995] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
[ 0.305119] pci 0000:00:01.0: [1002:1313] type 00 class 0x030000
[ 0.305134] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.305141] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 0.305145] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.305150] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
[ 0.305155] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
[ 0.305174] pci 0000:00:01.0: supports D1 D2
[ 0.305176] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.305249] pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
[ 0.305263] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
[ 0.305288] pci 0000:00:01.1: supports D1 D2
[ 0.305411] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
[ 0.305519] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
[ 0.305594] pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
[ 0.305635] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.305769] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
[ 0.305905] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.305941] pci 0000:00:10.0: reg 0x10: [mem 0xfeb6a000-0xfeb6bfff 64bit]
[ 0.306014] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.306060] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.306136] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[ 0.306171] pci 0000:00:10.1: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
[ 0.306244] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.306289] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.306363] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.306385] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.306394] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.306402] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.306410] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.306418] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.306426] pci 0000:00:11.0: reg 0x24: [mem 0xfeb71000-0xfeb717ff]
[ 0.306543] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.306556] pci 0000:00:12.0: reg 0x10: [mem 0xfeb70000-0xfeb70fff]
[ 0.306632] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.306702] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.306722] pci 0000:00:12.2: reg 0x10: [mem 0xfeb6f000-0xfeb6f0ff]
[ 0.306779] pci 0000:00:12.2: supports D1 D2
[ 0.306781] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306818] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.306889] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.306902] pci 0000:00:13.0: reg 0x10: [mem 0xfeb6e000-0xfeb6efff]
[ 0.306977] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.307049] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.307069] pci 0000:00:13.2: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
[ 0.307134] pci 0000:00:13.2: supports D1 D2
[ 0.307135] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.307175] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.307252] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.307398] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.307420] pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
[ 0.307469] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.307505] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.307572] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.307717] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.307777] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.307843] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.307857] pci 0000:00:14.5: reg 0x10: [mem 0xfeb6c000-0xfeb6cfff]
[ 0.307933] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.308001] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
[ 0.308066] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
[ 0.308130] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
[ 0.308198] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
[ 0.308264] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
[ 0.308324] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
[ 0.308494] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.308524] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.308545] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
[ 0.308558] pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
[ 0.308611] pci 0000:01:00.0: supports D1 D2
[ 0.308612] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.315303] pci 0000:00:03.1: PCI bridge to [bus 01]
[ 0.315315] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.315318] pci 0000:00:03.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.315323] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.315514] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.315525] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.315527] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.315529] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.315531] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.315533] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.315534] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.315536] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.316278] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316341] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316401] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316459] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316506] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316544] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316582] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.316619] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.317011] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.317018] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.317030] vgaarb: loaded
[ 0.317033] vgaarb: bridge control possible 0000:00:01.0
[ 0.317275] SCSI subsystem initialized
[ 0.317348] libata version 3.00 loaded.
[ 0.317375] ACPI: bus type USB registered
[ 0.317395] usbcore: registered new interface driver usbfs
[ 0.317408] usbcore: registered new interface driver hub
[ 0.317431] usbcore: registered new device driver usb
[ 0.317656] PCI: Using ACPI for IRQ routing
[ 0.324481] PCI: pci_cache_line_size set to 64 bytes
[ 0.324534] e820: reserve RAM buffer [mem 0x9c5d6000-0x9fffffff]
[ 0.324536] e820: reserve RAM buffer [mem 0x9c8da000-0x9fffffff]
[ 0.324538] e820: reserve RAM buffer [mem 0x9e1c5000-0x9fffffff]
[ 0.324539] e820: reserve RAM buffer [mem 0x9e850000-0x9fffffff]
[ 0.324540] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[ 0.324542] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 0.324671] NetLabel: Initializing
[ 0.324676] NetLabel: domain hash size = 128
[ 0.324678] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.324691] NetLabel: unlabeled traffic allowed by default
[ 0.324940] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.324947] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.327142] clocksource: Switched to clocksource hpet
[ 0.333889] AppArmor: AppArmor Filesystem Enabled
[ 0.333969] pnp: PnP ACPI init
[ 0.334097] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.334106] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.334188] system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.334195] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334271] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.334277] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334438] system 00:03: [io 0x0220-0x0227] has been reserved
[ 0.334444] system 00:03: [io 0x0228-0x0237] has been reserved
[ 0.334448] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 0.334453] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334769] pnp 00:04: [dma 0 disabled]
[ 0.334815] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.335109] pnp 00:05: [dma 0 disabled]
[ 0.335227] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.335276] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.335303] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.335472] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.335479] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.335763] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.335768] system 00:09: [io 0x040b] has been reserved
[ 0.335772] system 00:09: [io 0x04d6] has been reserved
[ 0.335776] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.335780] system 00:09: [io 0x0c14] has been reserved
[ 0.335784] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.335788] system 00:09: [io 0x0c52] has been reserved
[ 0.335792] system 00:09: [io 0x0c6c] has been reserved
[ 0.335796] system 00:09: [io 0x0c6f] has been reserved
[ 0.335799] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.335803] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.335807] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.335811] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.335815] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.335819] system 00:09: [io 0x0800-0x089f] has been reserved
[ 0.335823] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.335827] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.335831] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.335835] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.335840] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.335845] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.335849] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.335853] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.335858] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.335862] system 00:09: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.335866] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.335871] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.336082] pnp: PnP ACPI: found 10 devices
[ 0.343410] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.343447] pci 0000:00:03.1: PCI bridge to [bus 01]
[ 0.343452] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.343458] pci 0000:00:03.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.343464] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.343472] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.343486] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.343488] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.343490] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.343491] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.343493] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.343495] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.343497] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.343499] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.343500] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.343502] pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.343504] pci_bus 0000:02: resource 4 [io 0x0000-0x03af window]
[ 0.343505] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.343507] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df window]
[ 0.343509] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff window]
[ 0.343511] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.343512] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.343514] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.343552] NET: Registered protocol family 2
[ 0.343731] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.343823] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.343964] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.344016] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.344037] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.344126] NET: Registered protocol family 1
[ 0.344151] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.345484] PCI: CLS 64 bytes, default 64
[ 0.345544] Unpacking initramfs...
[ 0.858942] Freeing initrd memory: 39340K
[ 0.858995] AMD-Vi: IOMMU performance counters supported
[ 0.859001] AMD-Vi: Applying ATS write check workaround for IOMMU at 0000:00:00.2
[ 0.859214] ERROR: Unable to locate IOAPIC for GSI 56
[ 0.859220] pci 0000:00:00.2: PCI INT A: failed to register GSI
[ 0.859600] iommu: Adding device 0000:00:00.0 to group 0
[ 0.859961] iommu: Adding device 0000:00:01.0 to group 1
[ 0.859980] iommu: Using direct mapping for device 0000:00:01.0
[ 0.859998] iommu: Adding device 0000:00:01.1 to group 1
[ 0.860312] iommu: Adding device 0000:00:02.0 to group 2
[ 0.860650] iommu: Adding device 0000:00:03.0 to group 3
[ 0.860667] iommu: Adding device 0000:00:03.1 to group 3
[ 0.861002] iommu: Adding device 0000:00:04.0 to group 4
[ 0.861408] iommu: Adding device 0000:00:10.0 to group 5
[ 0.861489] iommu: Adding device 0000:00:10.1 to group 5
[ 0.861823] iommu: Adding device 0000:00:11.0 to group 6
[ 0.862167] iommu: Adding device 0000:00:12.0 to group 7
[ 0.862183] iommu: Adding device 0000:00:12.2 to group 7
[ 0.862527] iommu: Adding device 0000:00:13.0 to group 8
[ 0.862544] iommu: Adding device 0000:00:13.2 to group 8
[ 0.862892] iommu: Adding device 0000:00:14.0 to group 9
[ 0.862909] iommu: Adding device 0000:00:14.2 to group 9
[ 0.862925] iommu: Adding device 0000:00:14.3 to group 9
[ 0.863363] iommu: Adding device 0000:00:14.4 to group 10
[ 0.863715] iommu: Adding device 0000:00:14.5 to group 11
[ 0.864089] iommu: Adding device 0000:00:18.0 to group 12
[ 0.864113] iommu: Adding device 0000:00:18.1 to group 12
[ 0.864130] iommu: Adding device 0000:00:18.2 to group 12
[ 0.864148] iommu: Adding device 0000:00:18.3 to group 12
[ 0.864166] iommu: Adding device 0000:00:18.4 to group 12
[ 0.864183] iommu: Adding device 0000:00:18.5 to group 12
[ 0.864198] iommu: Adding device 0000:01:00.0 to group 3
[ 0.864651] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.864656] AMD-Vi: Extended features: PPR GT IA PC
[ 0.864662] AMD-Vi: Interrupt remapping enabled
[ 0.864989] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.866462] perf: AMD NB counters detected
[ 0.866654] LVT offset 0 assigned for vector 0x400
[ 0.866670] perf: AMD IBS detected (0x000001ff)
[ 0.866679] perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
[ 0.866761] Scanning for low memory corruption every 60 seconds
[ 0.867305] audit: initializing netlink subsys (disabled)
[ 0.867335] audit: type=2000 audit(1584618448.684:1): initialized
[ 0.867686] Initialise system trusted keyring
[ 0.867907] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.867912] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.869315] zbud: loaded
[ 0.869766] VFS: Disk quotas dquot_6.6.0
[ 0.869800] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.870061] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.870537] fuse init (API version 7.23)
[ 0.870745] Key type big_key registered
[ 0.870765] Allocating IMA MOK and blacklist keyrings.
[ 0.871387] Key type asymmetric registered
[ 0.871394] Asymmetric key parser 'x509' registered
[ 0.871446] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.871523] io scheduler noop registered
[ 0.871528] io scheduler deadline registered (default)
[ 0.871566] io scheduler cfq registered
[ 0.871913] pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
[ 0.871920] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.871926] pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
[ 0.871933] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.871944] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.871990] efifb: probing for efifb
[ 0.872010] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000c00000, using 3072k, total 3072k
[ 0.872016] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.872019] efifb: scrolling: redraw
[ 0.872023] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.873674] Console: switching to colour frame buffer device 128x48
[ 0.875033] fb0: EFI VGA frame buffer device
[ 0.875226] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.875257] ACPI: Power Button [PWRB]
[ 0.875308] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.875332] ACPI: Power Button [PWRF]
[ 0.875451] ACPI: acpi_idle registered with cpuidle
[ 0.876086] GHES: HEST is not enabled!
[ 0.876253] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.896703] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.898497] Linux agpgart interface v0.103
[ 0.901346] loop: module loaded
[ 0.901606] libphy: Fixed MDIO Bus: probed
[ 0.901624] tun: Universal TUN/TAP device driver, 1.6
[ 0.901641] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.901774] PPP generic driver version 2.4.2
[ 0.901891] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.901917] ehci-pci: EHCI PCI platform driver
[ 0.902115] QUIRK: Enable AMD PLL fix
[ 0.902142] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.902167] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.902195] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.902261] ehci-pci 0000:00:12.2: debug port 1
[ 0.902324] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6f000
[ 0.911312] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.911402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.912082] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.912752] usb usb1: Product: EHCI Host Controller
[ 0.913408] usb usb1: Manufacturer: Linux 4.4.0-145-generic ehci_hcd
[ 0.914064] usb usb1: SerialNumber: 0000:00:12.2
[ 0.914918] hub 1-0:1.0: USB hub found
[ 0.915667] hub 1-0:1.0: 5 ports detected
[ 0.916696] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.917355] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.918014] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.918741] ehci-pci 0000:00:13.2: debug port 1
[ 0.919506] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6d000
[ 0.931312] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.932038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.932781] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.933433] usb usb2: Product: EHCI Host Controller
[ 0.934078] usb usb2: Manufacturer: Linux 4.4.0-145-generic ehci_hcd
[ 0.934725] usb usb2: SerialNumber: 0000:00:13.2
[ 0.935618] hub 2-0:1.0: USB hub found
[ 0.936259] hub 2-0:1.0: 5 ports detected
[ 0.937120] ehci-platform: EHCI generic platform driver
[ 0.937760] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.938385] ohci-pci: OHCI PCI platform driver
[ 0.939221] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 0.939868] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.940605] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb70000
[ 0.999346] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.999976] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.000584] usb usb3: Product: OHCI PCI host controller
[ 1.001184] usb usb3: Manufacturer: Linux 4.4.0-145-generic ohci_hcd
[ 1.001782] usb usb3: SerialNumber: 0000:00:12.0
[ 1.002568] hub 3-0:1.0: USB hub found
[ 1.003180] hub 3-0:1.0: 5 ports detected
[ 1.004089] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.004678] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.005320] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6e000
[ 1.063341] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.063951] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.064545] usb usb4: Product: OHCI PCI host controller
[ 1.065134] usb usb4: Manufacturer: Linux 4.4.0-145-generic ohci_hcd
[ 1.065724] usb usb4: SerialNumber: 0000:00:13.0
[ 1.066505] hub 4-0:1.0: USB hub found
[ 1.067142] hub 4-0:1.0: 5 ports detected
[ 1.068051] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.068638] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 1.069295] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb6c000
[ 1.127327] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.127931] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.128518] usb usb5: Product: OHCI PCI host controller
[ 1.129103] usb usb5: Manufacturer: Linux 4.4.0-145-generic ohci_hcd
[ 1.129689] usb usb5: SerialNumber: 0000:00:14.5
[ 1.130430] hub 5-0:1.0: USB hub found
[ 1.131091] hub 5-0:1.0: 2 ports detected
[ 1.131862] ohci-platform: OHCI generic platform driver
[ 1.132503] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.133311] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.133907] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 1.134746] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 1.135602] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.136217] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.136830] usb usb6: Product: xHCI Host Controller
[ 1.137426] usb usb6: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[ 1.138026] usb usb6: SerialNumber: 0000:00:10.0
[ 1.138816] hub 6-0:1.0: USB hub found
[ 1.139472] hub 6-0:1.0: 2 ports detected
[ 1.140259] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.140852] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
[ 1.141532] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.142157] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.142766] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.143383] usb usb7: Product: xHCI Host Controller
[ 1.143988] usb usb7: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[ 1.144598] usb usb7: SerialNumber: 0000:00:10.0
[ 1.145352] hub 7-0:1.0: USB hub found
[ 1.146021] hub 7-0:1.0: 2 ports detected
[ 1.146884] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.147558] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
[ 1.148404] xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 1.149250] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.149860] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.150474] usb usb8: Product: xHCI Host Controller
[ 1.151127] usb usb8: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[ 1.151744] usb usb8: SerialNumber: 0000:00:10.1
[ 1.152522] hub 8-0:1.0: USB hub found
[ 1.153197] hub 8-0:1.0: 2 ports detected
[ 1.153943] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.154544] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
[ 1.155175] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.155805] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.156419] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.157040] usb usb9: Product: xHCI Host Controller
[ 1.157658] usb usb9: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[ 1.158280] usb usb9: SerialNumber: 0000:00:10.1
[ 1.159089] hub 9-0:1.0: USB hub found
[ 1.159770] hub 9-0:1.0: 2 ports detected
[ 1.160536] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.161663] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.162281] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.163101] mousedev: PS/2 mouse device common for all mice
[ 1.163994] rtc_cmos 00:07: RTC can wake from S4
[ 1.164794] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.165473] rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.166100] i2c /dev entries driver
[ 1.166775] device-mapper: uevent: version 1.0.3
[ 1.167574] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.168245] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.168877] EFI Variables Facility v0.08 2004-May-17
[ 1.176349] NET: Registered protocol family 10
[ 1.177343] NET: Registered protocol family 17
[ 1.177977] Key type dns_resolver registered
[ 1.179049] microcode: CPU0: patch_level=0x06003103
[ 1.179760] microcode: CPU1: patch_level=0x06003103
[ 1.180559] microcode: CPU2: patch_level=0x06003103
[ 1.181221] microcode: CPU3: patch_level=0x06003103
[ 1.181971] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.182888] registered taskstats version 1
[ 1.183572] Loading compiled-in X.509 certificates
[ 1.184890] Loaded X.509 cert 'Build time autogenerated kernel key: 766cb56454e39ea623681e1efb4bf4db48a2396c'
[ 1.185525] zswap: loaded using pool lzo/zbud
[ 1.189016] Key type trusted registered
[ 1.194500] Key type encrypted registered
[ 1.195150] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.195778] ima: No TPM chip found, activating TPM-bypass!
[ 1.196399] ima: Allocated hash algorithm: sha1
[ 1.197019] evm: HMAC attrs: 0x1
[ 1.198052] Magic number: 12:809:782
[ 1.198842] rtc_cmos 00:07: setting system clock to 2020-03-19 11:47:30 UTC (1584618450)
[ 1.199721] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.200623] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.201240] EDD information not available.
[ 1.201920] PM: Hibernation image not present or could not be loaded.
[ 1.203307] Freeing unused kernel memory: 1484K
[ 1.227297] Write protecting the kernel read-only data: 14336k
[ 1.228713] Freeing unused kernel memory: 1620K
[ 1.229646] Freeing unused kernel memory: 88K
[ 1.250049] random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.250787] random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.251191] random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.251220] random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.252715] random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.253355] random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.258734] random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.259421] random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.260022] random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.261018] random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.296421] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.297401] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.298136] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 1.298929] acpi device:02: registered as cooling_device4
[ 1.299855] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 1.321398] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.321472] ahci 0000:00:11.0: version 3.0
[ 1.321743] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x13 impl SATA mode
[ 1.321746] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.321751] ahci 0000:00:11.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
[ 1.324382] [drm] Initialized drm 1.1.0 20060810
[ 1.325798] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc900006ea000, 74:d4:35:b1:ed:c7, XID 0c900800 IRQ 45
[ 1.326491] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.332920] scsi host0: ahci
[ 1.335407] scsi host1: ahci
[ 1.336838] scsi host2: ahci
[ 1.337885] scsi host3: ahci
[ 1.338812] scsi host4: ahci
[ 1.339745] ata1: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71100 irq 37
[ 1.340530] ata2: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71180 irq 38
[ 1.341246] ata3: DUMMY
[ 1.341960] ata4: DUMMY
[ 1.342673] ata5: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71300 irq 41
[ 1.362471] [drm] radeon kernel modesetting enabled.
[ 1.365356] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.368980] Found CRAT image with size=1360
[ 1.369671] Parsing CRAT table with 1 nodes
[ 1.370318] Found CU entry in CRAT table with proximity_domain=0 caps=0
[ 1.370958] CU CPU: cores=4 id_base=16
[ 1.371708] Found CU entry in CRAT table with proximity_domain=0 caps=0
[ 1.372356] CU GPU: simds=32 id_base=-2147483648
[ 1.372984] Found memory entry in CRAT table with proximity_domain=0
[ 1.373642] Found memory entry in CRAT table with proximity_domain=0
[ 1.374268] Found cache entry in CRAT table with processor_id=16
[ 1.374893] Found cache entry in CRAT table with processor_id=16
[ 1.375621] Found cache entry in CRAT table with processor_id=16
[ 1.376248] Found cache entry in CRAT table with processor_id=17
[ 1.376848] Found cache entry in CRAT table with processor_id=18
[ 1.377443] Found cache entry in CRAT table with processor_id=18
[ 1.378015] Found cache entry in CRAT table with processor_id=18
[ 1.378587] Found cache entry in CRAT table with processor_id=19
[ 1.379154] Found TLB entry in CRAT table (not processing)
[ 1.379818] Found TLB entry in CRAT table (not processing)
[ 1.380373] Found TLB entry in CRAT table (not processing)
[ 1.380916] Found TLB entry in CRAT table (not processing)
[ 1.381459] Found TLB entry in CRAT table (not processing)
[ 1.382003] Found TLB entry in CRAT table (not processing)
[ 1.382546] Found TLB entry in CRAT table (not processing)
[ 1.383116] Found TLB entry in CRAT table (not processing)
[ 1.383649] Found TLB entry in CRAT table (not processing)
[ 1.384162] Found TLB entry in CRAT table (not processing)
[ 1.384644] Creating topology SYSFS entries
[ 1.385139] Finished initializing topology ret=0
[ 1.385814] kfd kfd: Initialized module
[ 1.386528] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 1.386530] fb: switching to radeondrmfb from EFI VGA
[ 1.387010] Console: switching to colour dummy device 80x25
[ 1.387576] [drm] initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1002:0x0123).
[ 1.387598] [drm] register mmio base: 0xFEB00000
[ 1.387602] [drm] register mmio size: 262144
[ 1.387610] [drm] doorbell mmio base: 0xD0000000
[ 1.387613] [drm] doorbell mmio size: 8388608
[ 1.387666] ATOM BIOS: 113
[ 1.387723] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 1.387731] radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF
[ 1.387740] [drm] Detected VRAM RAM=512M, BAR=256M
[ 1.387744] [drm] RAM width 128bits DDR
[ 1.387825] [TTM] Zone kernel: Available graphics memory: 1763834 kiB
[ 1.387829] [TTM] Initializing pool allocator
[ 1.387837] [TTM] Initializing DMA pool allocator
[ 1.387858] [drm] radeon: 512M of VRAM memory ready
[ 1.387861] [drm] radeon: 2048M of GTT memory ready.
[ 1.387872] [drm] Loading kaveri Microcode
[ 1.387994] [drm] Internal thermal controller without fan control
[ 1.389114] [drm] radeon: dpm initialized
[ 1.391345] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 1.391362] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 1.417966] [drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
[ 1.418114] radeon 0000:00:01.0: WB enabled
[ 1.418127] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800905c7c00
[ 1.418137] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8800905c7c04
[ 1.418146] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8800905c7c08
[ 1.418155] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800905c7c0c
[ 1.418164] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff8800905c7c10
[ 1.418584] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90001036c98
[ 1.418749] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff8800905c7c18
[ 1.418758] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff8800905c7c1c
[ 1.418767] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.418772] [drm] Driver supports precise vblank timestamp query.
[ 1.418822] radeon 0000:00:01.0: radeon: using MSI.
[ 1.418855] [drm] radeon: irq initialized.
[ 1.420832] [drm] ring test on 0 succeeded in 3 usecs
[ 1.420913] [drm] ring test on 1 succeeded in 2 usecs
[ 1.420928] [drm] ring test on 2 succeeded in 2 usecs
[ 1.421059] [drm] ring test on 3 succeeded in 3 usecs
[ 1.421068] [drm] ring test on 4 succeeded in 3 usecs
[ 1.435156] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 1.463121] usb 8-1: new high-speed USB device number 2 using xhci_hcd
[ 1.466957] [drm] ring test on 5 succeeded in 1 usecs
[ 1.486821] [drm] UVD initialized successfully.
[ 1.515144] usb 4-2: new full-speed USB device number 2 using ohci-pci
[ 1.593903] usb 8-1: New USB device found, idVendor=03f0, idProduct=0653
[ 1.593911] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.593918] usb 8-1: Product: DeskJet 3700 series
[ 1.593923] usb 8-1: Manufacturer: HP
[ 1.593928] usb 8-1: SerialNumber: CN7193P0TV06GZ
[ 1.596015] [drm] ring test on 6 succeeded in 16 usecs
[ 1.596030] [drm] ring test on 7 succeeded in 4 usecs
[ 1.596035] [drm] VCE initialized successfully.
[ 1.597800] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.604309] usb 3-1: New USB device found, idVendor=046d, idProduct=c31c
[ 1.604320] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.604327] usb 3-1: Product: USB Keyboard
[ 1.604333] usb 3-1: Manufacturer: Logitech
[ 1.621806] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.637725] usbcore: registered new interface driver usbhid
[ 1.637739] usbhid: USB HID core driver
[ 1.640815] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:046D:C31C.0001/input/input6
[ 1.695589] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.0-1/input0
[ 1.699629] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0002/input/input7
[ 1.707268] usb 8-2: new low-speed USB device number 3 using xhci_hcd
[ 1.755462] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.0-1/input1
[ 1.835198] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.835234] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.835261] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.836061] ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[ 1.836068] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.836793] ata2.00: configured for UDMA/133
[ 1.837428] ata1.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[ 1.838276] ata1.00: configured for UDMA/100
[ 1.839994] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB01 PQ: 0 ANSI: 5
[ 1.858979] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.858994] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.859367] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.859513] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.859833] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[ 1.860136] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.860149] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 1.860207] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.860234] sd 1:0:0:0: [sda] Write Protect is off
[ 1.860242] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.860274] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.863181] tsc: Refined TSC clocksource calibration: 3094.371 MHz
[ 1.863193] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c9a825559e, max_idle_ns: 440795284421 ns
[ 1.870416] usb 8-2: New USB device found, idVendor=046d, idProduct=c05a
[ 1.870428] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.870435] usb 8-2: Product: USB Optical Mouse
[ 1.870441] usb 8-2: Manufacturer: Logitech
[ 1.870625] usb 8-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.882668] ata5.00: ATA-7: ST3320820AS, 3.AAD, max UDMA/133
[ 1.882679] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.883571] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/0003:046D:C05A.0003/input/input8
[ 1.883814] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.1-2/input0
[ 1.886328] usb 4-2: New USB device found, idVendor=0a12, idProduct=0001
[ 1.886341] usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.886348] usb 4-2: Product: BT2.0
[ 1.903366] sda: sda1 sda2 sda3
[ 1.903920] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.941067] ata5.00: configured for UDMA/133
[ 1.941439] scsi 4:0:0:0: Direct-Access ATA ST3320820AS D PQ: 0 ANSI: 5
[ 1.941792] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.941813] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.941877] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.941887] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.941935] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.980688] sdb: sdb1
[ 1.981139] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.095270] [drm] ib test on ring 1 succeeded in 0 usecs
[ 2.595253] [drm] ib test on ring 2 succeeded in 0 usecs
[ 2.595394] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.595482] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.863411] clocksource: Switched to clocksource tsc
[ 3.115200] [drm] ib test on ring 5 succeeded
[ 3.137504] [drm] ib test on ring 6 succeeded
[ 3.138825] [drm] ib test on ring 7 succeeded
[ 3.140301] [drm] Radeon Display Connectors
[ 3.140310] [drm] Connector 0:
[ 3.140315] [drm] DVI-D-1
[ 3.140320] [drm] HPD3
[ 3.140325] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 3.140332] [drm] Encoders:
[ 3.140337] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.140341] [drm] Connector 1:
[ 3.140345] [drm] HDMI-A-1
[ 3.140349] [drm] HPD1
[ 3.140354] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 3.140361] [drm] Encoders:
[ 3.140365] [drm] DFP1: INTERNAL_UNIPHY
[ 3.140369] [drm] Connector 2:
[ 3.140373] [drm] VGA-1
[ 3.140377] [drm] HPD2
[ 3.140382] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 3.140388] [drm] Encoders:
[ 3.140392] [drm] CRT1: INTERNAL_UNIPHY3
[ 3.140397] [drm] CRT1: NUTMEG
[ 3.320166] [drm] fb mappable at 0xC0728000
[ 3.320176] [drm] vram apper at 0xC0000000
[ 3.320181] [drm] size 5324800
[ 3.320185] [drm] fb depth is 24
[ 3.320189] [drm] pitch is 5888
[ 3.320349] fbcon: radeondrmfb (fb0) is primary device
[ 3.443786] Console: switching to colour frame buffer device 180x56
[ 3.447676] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 3.467561] ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 3.467626] ACPI Error: Method parse/execution failed [\_SB.PCI0.VGA.ATC0] (Node ffff88013a8c1028), AE_NOT_FOUND (20150930/psparse-542)
[ 3.467698] ACPI Error: Method parse/execution failed [\_SB.PCI0.VGA.ATCS] (Node ffff88013a8c1000), AE_NOT_FOUND (20150930/psparse-542)
[ 3.471468] kfd kfd: Allocated 3944480 bytes on gart for device(1002:1313)
[ 3.471586] kfd kfd: added device (1002:1313)
[ 3.471611] [drm] Initialized radeon 2.43.0 20080528 for 0000:00:01.0 on minor 0
[ 3.684327] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.980329] random: nonblocking pool is initialized
[ 5.005318] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 5.005671] systemd[1]: Detected architecture x86-64.
[ 5.069514] systemd[1]: Set hostname to <pc-hascoet>.
[ 7.563886] systemd[1]: [/etc/systemd/system/snap-vlc-1397.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
[ 7.568423] systemd[1]: [/etc/systemd/system/snap-core-8689.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
[ 7.588386] systemd[1]: [/etc/systemd/system/snap-core-8592.mount:10] Unknown lvalue 'LazyUnmount' in section 'Mount'
[ 7.701092] systemd[1]: Created slice User and Session Slice.
[ 7.703881] systemd[1]: Listening on udev Control Socket.
[ 7.706603] systemd[1]: Listening on Journal Audit Socket.
[ 7.709343] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 7.712218] systemd[1]: Created slice System Slice.
[ 7.714996] systemd[1]: Reached target User and Group Name Lookups.
[ 7.717778] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.720894] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.723944] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.727027] systemd[1]: Listening on Syslog Socket.
[ 7.730092] systemd[1]: Reached target Slices.
[ 7.733326] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.736542] systemd[1]: Listening on udev Kernel Socket.
[ 7.739787] systemd[1]: Listening on Journal Socket.
[ 7.759036] systemd[1]: Starting Uncomplicated firewall...
[ 7.762990] systemd[1]: Started Read required files in advance.
[ 7.767498] systemd[1]: Started Braille Device Support.
[ 7.771623] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.775663] systemd[1]: Starting Set console keymap...
[ 7.979019] systemd[1]: Mounting Huge Pages File System...
[ 7.983371] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.987448] systemd[1]: Mounting Debug File System...
[ 7.990949] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.994994] systemd[1]: Starting Journal Service...
[ 7.998019] systemd[1]: Reached target Encrypted Volumes.
[ 8.001051] systemd[1]: Reached target Remote File Systems.
[ 8.138950] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.238947] systemd[1]: Starting Load Kernel Modules...
[ 8.242070] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.245988] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.251541] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.254693] systemd[1]: Mounted Huge Pages File System.
[ 8.257680] systemd[1]: Mounted Debug File System.
[ 8.261062] systemd[1]: Started Uncomplicated firewall.
[ 8.264579] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 8.310980] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.375889] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 8.378799] systemd[1]: Started Remount Root and Kernel File Systems.
[ 8.890861] systemd[1]: Starting udev Coldplug all Devices...
[ 8.894799] systemd[1]: Starting Load/Save Random Seed...
[ 9.095430] systemd[1]: Started udev Coldplug all Devices.
[ 9.149359] systemd[1]: Started Set console keymap.
[ 9.180656] lp: driver loaded but no devices found
[ 9.202837] systemd[1]: Started Load/Save Random Seed.
[ 9.206031] systemd[1]: Started Journal Service.
[ 9.227890] ppdev: user-space parallel port driver
[ 9.440529] parport_pc 00:05: reported by Plug and Play ACPI
[ 9.442079] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 9.538969] lp0: using parport0 (interrupt-driven).
[ 9.545958] systemd-journald[257]: Received request to flush runtime journal from PID 1
[ 13.689465] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.281027] EDAC MC: Ver: 3.0.0
[ 14.321620] MCE: In-kernel MCE decoding enabled.
[ 14.329459] AMD64 EDAC driver v3.4.0
[ 14.329502] EDAC amd64: DRAM ECC disabled.
[ 14.329511] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 14.335353] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 14.335587] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 14.450113] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
[ 14.450245] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 14.498221] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 14.504426] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 14.504436] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.504440] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 14.504443] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 14.504446] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e
[ 14.504448] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 14.504451] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 14.504454] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 14.504457] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 14.504460] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
[ 14.516677] Bluetooth: Core ver 2.21
[ 14.516695] NET: Registered protocol family 31
[ 14.516697] Bluetooth: HCI device and connection manager initialized
[ 14.516702] Bluetooth: HCI socket layer initialized
[ 14.516706] Bluetooth: L2CAP socket layer initialized
[ 14.516714] Bluetooth: SCO socket layer initialized
[ 14.518709] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 14.518879] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 14.519004] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 14.519119] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 14.700278] usbcore: registered new interface driver btusb
[ 14.703858] AVX version of gcm_enc/dec engaged.
[ 14.703862] AES CTR mode by8 optimization enabled
[ 14.825266] kvm: Nested Virtualization enabled
[ 14.825271] kvm: Nested Paging enabled
[ 25.072819] Adding 3609596k swap on /dev/sda3. Priority:-1 extents:1 across:3609596k FS
[ 27.099963] audit: type=1400 audit(1584618476.400:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=803 comm="apparmor_parser"
[ 27.099977] audit: type=1400 audit(1584618476.400:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=803 comm="apparmor_parser"
[ 27.099984] audit: type=1400 audit(1584618476.400:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=803 comm="apparmor_parser"
[ 27.099990] audit: type=1400 audit(1584618476.400:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=803 comm="apparmor_parser"
[ 27.166582] audit: type=1400 audit(1584618476.464:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=802 comm="apparmor_parser"
[ 27.166596] audit: type=1400 audit(1584618476.464:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=802 comm="apparmor_parser"
[ 27.729072] audit: type=1400 audit(1584618477.024:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=819 comm="apparmor_parser"
[ 27.729086] audit: type=1400 audit(1584618477.024:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=819 comm="apparmor_parser"
[ 27.753290] audit: type=1400 audit(1584618477.052:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=820 comm="apparmor_parser"
[ 27.753306] audit: type=1400 audit(1584618477.052:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=820 comm="apparmor_parser"
[ 28.932294] usblp 8-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 28.932340] usbcore: registered new interface driver usblp
[ 33.417194] cgroup: new mount options do not match the existing superblock, will be ignored
[ 33.893384] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.893389] Bluetooth: BNEP filters: protocol multicast
[ 33.893394] Bluetooth: BNEP socket layer initialized
[ 39.612915] usblp0: removed
[ 39.617645] usblp 8-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x0653
[ 40.229637] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 40.597737] r8169 0000:01:00.0 eth0: link down
[ 40.597756] r8169 0000:01:00.0 eth0: link down
[ 40.597889] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.256162] r8169 0000:01:00.0 eth0: link up
[ 42.256178] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 53.523220] Bluetooth: RFCOMM TTY layer initialized
[ 53.523234] Bluetooth: RFCOMM socket layer initialized
[ 53.523246] Bluetooth: RFCOMM ver 1.11
[ 240.538741] INFO: task ftscanhvd:1135 blocked for more than 120 seconds.
[ 240.538751] Not tainted 4.4.0-145-generic #171-Ubuntu
[ 240.538754] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.538758] ftscanhvd D ffff880099f87dd8 0 1135 1134 0x00400000
[ 240.538766] ffff880099f87dd8 ffff880138394f00 ffff880139cd9c00 ffff88009abdd400
[ 240.538772] ffff880099f88000 ffffffffc00b20c4 ffff88009abdd400 00000000ffffffff
[ 240.538778] ffffffffc00b20c8 ffff880099f87df0 ffffffff8185dea5 ffffffffc00b20c0
[ 240.538783] Call Trace:
[ 240.538798] [<ffffffff8185dea5>] schedule+0x35/0x80
[ 240.538804] [<ffffffff8185e1fe>] schedule_preempt_disabled+0xe/0x10
[ 240.538809] [<ffffffff81860097>] __mutex_lock_slowpath+0xb7/0x130
[ 240.538814] [<ffffffff8186012f>] mutex_lock+0x1f/0x30
[ 240.538821] [<ffffffffc00afcd3>] pp_ioctl+0x23/0x50 [ppdev]
[ 240.538828] [<ffffffff8122ff9f>] do_vfs_ioctl+0x2af/0x4b0
[ 240.538833] [<ffffffff8122bc44>] ? putname+0x54/0x60
[ 240.538838] [<ffffffff8121b05f>] ? do_sys_open+0x1bf/0x2a0
[ 240.538843] [<ffffffff81230219>] SyS_ioctl+0x79/0x90
[ 240.538849] [<ffffffff8186281b>] entry_SYSCALL_64_fastpath+0x22/0xcb
[ 315.556790] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 360.534647] INFO: task ftscanhvd:1135 blocked for more than 120 seconds.
[ 360.534653] Not tainted 4.4.0-145-generic #171-Ubuntu
[ 360.534655] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.534657] ftscanhvd D ffff880099f87dd8 0 1135 1134 0x00400000
[ 360.534662] ffff880099f87dd8 ffff880138394f00 ffff880139cd9c00 ffff88009abdd400
[ 360.534665] ffff880099f88000 ffffffffc00b20c4 ffff88009abdd400 00000000ffffffff
[ 360.534668] ffffffffc00b20c8 ffff880099f87df0 ffffffff8185dea5 ffffffffc00b20c0
[ 360.534671] Call Trace:
[ 360.534681] [<ffffffff8185dea5>] schedule+0x35/0x80
[ 360.534684] [<ffffffff8185e1fe>] schedule_preempt_disabled+0xe/0x10
[ 360.534687] [<ffffffff81860097>] __mutex_lock_slowpath+0xb7/0x130
[ 360.534690] [<ffffffff8186012f>] mutex_lock+0x1f/0x30
[ 360.534694] [<ffffffffc00afcd3>] pp_ioctl+0x23/0x50 [ppdev]
[ 360.534698] [<ffffffff8122ff9f>] do_vfs_ioctl+0x2af/0x4b0
[ 360.534701] [<ffffffff8122bc44>] ? putname+0x54/0x60
[ 360.534703] [<ffffffff8121b05f>] ? do_sys_open+0x1bf/0x2a0
[ 360.534706] [<ffffffff81230219>] SyS_ioctl+0x79/0x90
[ 360.534709] [<ffffffff8186281b>] entry_SYSCALL_64_fastpath+0x22/0xcb
[ 480.535916] INFO: task ftscanhvd:1135 blocked for more than 120 seconds.
[ 480.535926] Not tainted 4.4.0-145-generic #171-Ubuntu
[ 480.535929] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 480.535934] ftscanhvd D ffff880099f87dd8 0 1135 1134 0x00400000
[ 480.535943] ffff880099f87dd8 ffff880138394f00 ffff880139cd9c00 ffff88009abdd400
[ 480.535949] ffff880099f88000 ffffffffc00b20c4 ffff88009abdd400 00000000ffffffff
[ 480.535954] ffffffffc00b20c8 ffff880099f87df0 ffffffff8185dea5 ffffffffc00b20c0
[ 480.535960] Call Trace:
[ 480.535976] [<ffffffff8185dea5>] schedule+0x35/0x80
[ 480.535982] [<ffffffff8185e1fe>] schedule_preempt_disabled+0xe/0x10
[ 480.535988] [<ffffffff81860097>] __mutex_lock_slowpath+0xb7/0x130
[ 480.535994] [<ffffffff8186012f>] mutex_lock+0x1f/0x30
[ 480.536002] [<ffffffffc00afcd3>] pp_ioctl+0x23/0x50 [ppdev]
[ 480.536010] [<ffffffff8122ff9f>] do_vfs_ioctl+0x2af/0x4b0
[ 480.536016] [<ffffffff8122bc44>] ? putname+0x54/0x60
[ 480.536022] [<ffffffff8121b05f>] ? do_sys_open+0x1bf/0x2a0
[ 480.536027] [<ffffffff81230219>] SyS_ioctl+0x79/0x90
[ 480.536034] [<ffffffff8186281b>] entry_SYSCALL_64_fastpath+0x22/0xcb
[ 600.536403] INFO: task ftscanhvd:1135 blocked for more than 120 seconds.
[ 600.536411] Not tainted 4.4.0-145-generic #171-Ubuntu
[ 600.536413] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 600.536416] ftscanhvd D ffff880099f87dd8 0 1135 1134 0x00400000
[ 600.536423] ffff880099f87dd8 ffff880138394f00 ffff880139cd9c00 ffff88009abdd400
[ 600.536427] ffff880099f88000 ffffffffc00b20c4 ffff88009abdd400 00000000ffffffff
[ 600.536431] ffffffffc00b20c8 ffff880099f87df0 ffffffff8185dea5 ffffffffc00b20c0
[ 600.536435] Call Trace:
[ 600.536447] [<ffffffff8185dea5>] schedule+0x35/0x80
[ 600.536452] [<ffffffff8185e1fe>] schedule_preempt_disabled+0xe/0x10
[ 600.536456] [<ffffffff81860097>] __mutex_lock_slowpath+0xb7/0x130
[ 600.536460] [<ffffffff8186012f>] mutex_lock+0x1f/0x30
[ 600.536465] [<ffffffffc00afcd3>] pp_ioctl+0x23/0x50 [ppdev]
[ 600.536471] [<ffffffff8122ff9f>] do_vfs_ioctl+0x2af/0x4b0
[ 600.536485] [<ffffffff8122bc44>] ? putname+0x54/0x60
[ 600.536489] [<ffffffff8121b05f>] ? do_sys_open+0x1bf/0x2a0
[ 600.536493] [<ffffffff81230219>] SyS_ioctl+0x79/0x90
[ 600.536497] [<ffffffff8186281b>] entry_SYSCALL_64_fastpath+0x22/0xcb
[ 720.491740] INFO: task ftscanhvd:1135 blocked for more than 120 seconds.
[ 720.491750] Not tainted 4.4.0-145-generic #171-Ubuntu
[ 720.491753] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 720.491757] ftscanhvd D ffff880099f87dd8 0 1135 1134 0x00400000
[ 720.491766] ffff880099f87dd8 ffff880138394f00 ffff880139cd9c00 ffff88009abdd400
[ 720.491772] ffff880099f88000 ffffffffc00b20c4 ffff88009abdd400 00000000ffffffff
[ 720.491777] ffffffffc00b20c8 ffff880099f87df0 ffffffff8185dea5 ffffffffc00b20c0
[ 720.491782] Call Trace:
[ 720.491797] [<ffffffff8185dea5>] schedule+0x35/0x80
[ 720.491803] [<ffffffff8185e1fe>] schedule_preempt_disabled+0xe/0x10
[ 720.491808] [<ffffffff81860097>] __mutex_lock_slowpath+0xb7/0x130
[ 720.491814] [<ffffffff8186012f>] mutex_lock+0x1f/0x30
[ 720.491821] [<ffffffffc00afcd3>] pp_ioctl+0x23/0x50 [ppdev]
[ 720.491828] [<ffffffff8122ff9f>] do_vfs_ioctl+0x2af/0x4b0
[ 720.491833] [<ffffffff8122bc44>] ? putname+0x54/0x60
[ 720.491838] [<ffffffff8121b05f>] ? do_sys_open+0x1bf/0x2a0
[ 720.491844] [<ffffffff81230219>] SyS_ioctl+0x79/0x90
[ 720.491849] [<ffffffff8186281b>] entry_SYSCALL_64_fastpath+0x22/0xcb
[ 840.431112] INFO: task ftscanhvd:1135 blocked for more than 120 seconds.
[ 840.431119] Not tainted 4.4.0-145-generic #171-Ubuntu
[ 840.431122] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 840.431125] ftscanhvd D ffff880099f87dd8 0 1135 1134 0x00400000
[ 840.431131] ffff880099f87dd8 ffff880138394f00 ffff880139cd9c00 ffff88009abdd400
[ 840.431136] ffff880099f88000 ffffffffc00b20c4 ffff88009abdd400 00000000ffffffff
[ 840.431139] ffffffffc00b20c8 ffff880099f87df0 ffffffff8185dea5 ffffffffc00b20c0
[ 840.431143] Call Trace:
[ 840.431155] [<ffffffff8185dea5>] schedule+0x35/0x80
[ 840.431160] [<ffffffff8185e1fe>] schedule_preempt_disabled+0xe/0x10
[ 840.431164] [<ffffffff81860097>] __mutex_lock_slowpath+0xb7/0x130
[ 840.431168] [<ffffffff8186012f>] mutex_lock+0x1f/0x30
[ 840.431174] [<ffffffffc00afcd3>] pp_ioctl+0x23/0x50 [ppdev]
[ 840.431179] [<ffffffff8122ff9f>] do_vfs_ioctl+0x2af/0x4b0
[ 840.431183] [<ffffffff8122bc44>] ? putname+0x54/0x60
[ 840.431187] [<ffffffff8121b05f>] ? do_sys_open+0x1bf/0x2a0
[ 840.431190] [<ffffffff81230219>] SyS_ioctl+0x79/0x90
[ 840.431195] [<ffffffff8186281b>] entry_SYSCALL_64_fastpath+0x22/0xcb
[ 960.375169] INFO: task ftscanhvd:1135 blocked for more than 120 seconds.
[ 960.375177] Not tainted 4.4.0-145-generic #171-Ubuntu
[ 960.375179] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 960.375181] ftscanhvd D ffff880099f87dd8 0 1135 1134 0x00400000
[ 960.375187] ffff880099f87dd8 ffff880138394f00 ffff880139cd9c00 ffff88009abdd400
[ 960.375191] ffff880099f88000 ffffffffc00b20c4 ffff88009abdd400 00000000ffffffff
[ 960.375194] ffffffffc00b20c8 ffff880099f87df0 ffffffff8185dea5 ffffffffc00b20c0
[ 960.375198] Call Trace:
[ 960.375209] [<ffffffff8185dea5>] schedule+0x35/0x80
[ 960.375213] [<ffffffff8185e1fe>] schedule_preempt_disabled+0xe/0x10
[ 960.375217] [<ffffffff81860097>] __mutex_lock_slowpath+0xb7/0x130
[ 960.375220] [<ffffffff8186012f>] mutex_lock+0x1f/0x30
[ 960.375225] [<ffffffffc00afcd3>] pp_ioctl+0x23/0x50 [ppdev]
[ 960.375230] [<ffffffff8122ff9f>] do_vfs_ioctl+0x2af/0x4b0
[ 960.375233] [<ffffffff8122bc44>] ? putname+0x54/0x60
[ 960.375237] [<ffffffff8121b05f>] ? do_sys_open+0x1bf/0x2a0
[ 960.375240] [<ffffffff81230219>] SyS_ioctl+0x79/0x90
[ 960.375244] [<ffffffff8186281b>] entry_SYSCALL_64_fastpath+0x22/0xcb
[ 1080.321047] INFO: task ftscanhvd:1135 blocked for more than 120 seconds.
[ 1080.321056] Not tainted 4.4.0-145-generic #171-Ubuntu
[ 1080.321058] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1080.321061] ftscanhvd D ffff880099f87dd8 0 1135 1134 0x00400000
[ 1080.321068] ffff880099f87dd8 ffff880138394f00 ffff880139cd9c00 ffff88009abdd400
[ 1080.321073] ffff880099f88000 ffffffffc00b20c4 ffff88009abdd400 00000000ffffffff
[ 1080.321077] ffffffffc00b20c8 ffff880099f87df0 ffffffff8185dea5 ffffffffc00b20c0
[ 1080.321081] Call Trace:
[ 1080.321093] [<ffffffff8185dea5>] schedule+0x35/0x80
[ 1080.321097] [<ffffffff8185e1fe>] schedule_preempt_disabled+0xe/0x10
[ 1080.321101] [<ffffffff81860097>] __mutex_lock_slowpath+0xb7/0x130
[ 1080.321105] [<ffffffff8186012f>] mutex_lock+0x1f/0x30
[ 1080.321111] [<ffffffffc00afcd3>] pp_ioctl+0x23/0x50 [ppdev]
[ 1080.321116] [<ffffffff8122ff9f>] do_vfs_ioctl+0x2af/0x4b0
[ 1080.321120] [<ffffffff8122bc44>] ? putname+0x54/0x60
[ 1080.321123] [<ffffffff8121b05f>] ? do_sys_open+0x1bf/0x2a0
[ 1080.321127] [<ffffffff81230219>] SyS_ioctl+0x79/0x90
[ 1080.321132] [<ffffffff8186281b>] entry_SYSCALL_64_fastpath+0x22/0xcb
[ 1200.375315] INFO: task ftscanhvd:1135 blocked for more than 120 seconds.
[ 1200.375325] Not tainted 4.4.0-145-generic #171-Ubuntu
[ 1200.375329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1200.375333] ftscanhvd D ffff880099f87dd8 0 1135 1134 0x00400000
[ 1200.375342] ffff880099f87dd8 ffff880138394f00 ffff880139cd9c00 ffff88009abdd400
[ 1200.375348] ffff880099f88000 ffffffffc00b20c4 ffff88009abdd400 00000000ffffffff
[ 1200.375354] ffffffffc00b20c8 ffff880099f87df0 ffffffff8185dea5 ffffffffc00b20c0
[ 1200.375359] Call Trace:
[ 1200.375375] [<ffffffff8185dea5>] schedule+0x35/0x80
[ 1200.375382] [<ffffffff8185e1fe>] schedule_preempt_disabled+0xe/0x10
[ 1200.375388] [<ffffffff81860097>] __mutex_lock_slowpath+0xb7/0x130
[ 1200.375393] [<ffffffff8186012f>] mutex_lock+0x1f/0x30
[ 1200.375401] [<ffffffffc00afcd3>] pp_ioctl+0x23/0x50 [ppdev]
[ 1200.375410] [<ffffffff8122ff9f>] do_vfs_ioctl+0x2af/0x4b0
[ 1200.375415] [<ffffffff8122bc44>] ? putname+0x54/0x60
[ 1200.375421] [<ffffffff8121b05f>] ? do_sys_open+0x1bf/0x2a0
[ 1200.375426] [<ffffffff81230219>] SyS_ioctl+0x79/0x90
[ 1200.375432] [<ffffffff8186281b>] entry_SYSCALL_64_fastpath+0x22/0xcb
[ 1320.375937] INFO: task ftscanhvd:1135 blocked for more than 120 seconds.
[ 1320.375945] Not tainted 4.4.0-145-generic #171-Ubuntu
[ 1320.375947] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1320.375950] ftscanhvd D ffff880099f87dd8 0 1135 1134 0x00400000
[ 1320.375957] ffff880099f87dd8 ffff880138394f00 ffff880139cd9c00 ffff88009abdd400
[ 1320.375961] ffff880099f88000 ffffffffc00b20c4 ffff88009abdd400 00000000ffffffff
[ 1320.375965] ffffffffc00b20c8 ffff880099f87df0 ffffffff8185dea5 ffffffffc00b20c0
[ 1320.375971] Call Trace:
[ 1320.375984] [<ffffffff8185dea5>] schedule+0x35/0x80
[ 1320.375988] [<ffffffff8185e1fe>] schedule_preempt_disabled+0xe/0x10
[ 1320.375992] [<ffffffff81860097>] __mutex_lock_slowpath+0xb7/0x130
[ 1320.375996] [<ffffffff8186012f>] mutex_lock+0x1f/0x30
[ 1320.376001] [<ffffffffc00afcd3>] pp_ioctl+0x23/0x50 [ppdev]
[ 1320.376007] [<ffffffff8122ff9f>] do_vfs_ioctl+0x2af/0x4b0
[ 1320.376011] [<ffffffff8122bc44>] ? putname+0x54/0x60
[ 1320.376014] [<ffffffff8121b05f>] ? do_sys_open+0x1bf/0x2a0
[ 1320.376018] [<ffffffff81230219>] SyS_ioctl+0x79/0x90
[ 1320.376023] [<ffffffff8186281b>] entry_SYSCALL_64_fastpath+0x22/0xcb
[ 2475.530039] usb 8-2: USB disconnect, device number 3
[ 2483.548239] r8169 0000:01:00.0 eth0: link down
[ 2499.764222] usb 8-2: new low-speed USB device number 4 using xhci_hcd
[ 2499.927309] usb 8-2: New USB device found, idVendor=046d, idProduct=c05a
[ 2499.927319] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2499.927325] usb 8-2: Product: USB Optical Mouse
[ 2499.927330] usb 8-2: Manufacturer: Logitech
[ 2499.927745] usb 8-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2499.941823] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/0003:046D:C05A.0004/input/input14
[ 2499.942117] hid-generic 0003:046D:C05A.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.1-2/input0
[ 2502.631552] r8169 0000:01:00.0 eth0: link up
xx@pc-yy:~$ Ubuntu 22.04 LTS / Ubuntu Touch sur Nexus5
Linux pc-xy 4.15.0-177-generic #186-Ubuntu SMP Thu Apr 14 20:23:07 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kaveri [Radeon R7 Graphics]
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XM-D3H, BIOS F5 01/09/2014
Hors ligne
#5 Le 19/03/2020, à 15:05
- inbox
Re : [Résolu] Désactivation intempestive de la souris USB
Salut,
As-tu essayé de connecter une autre souris à la place de l'actuelle ?
Si tu branches ta souris sur un hub (multiprise USB), essaye sans.
A+
Dernière modification par inbox (Le 19/03/2020, à 15:20)
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#6 Le 19/03/2020, à 15:44
- Rodcotcot
Re : [Résolu] Désactivation intempestive de la souris USB
Salut, je viens de voir ton problème et j'aurais a peu près le même soucis. C'est les port USB qui ne sont plus reconnus pour moi. Ce qui veut dire souris USB plus reconnu et les clefs USB qui ne sont plus accessible. Ceux sur chacun des ports USB. Est-ce que tu pourrais voir si, lorsque tu perds ta souris, tu pux ou pas mettre sur ce port ou un autre une clef USB ou pas....
J'ai ouvert un file pour mon problème et, si ca se trouve, on a le meme soucis....
Courage.
ps : file : https://forum.ubuntu-fr.org/viewtopic.p … #p22239106
Hors ligne
#7 Le 19/03/2020, à 18:03
- moko138
Re : [Résolu] Désactivation intempestive de la souris USB
Guiriden,
Relis le message #2 et le lien : la commande, ce n'est pas "dmesg" !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#8 Le 19/03/2020, à 19:46
- Guiriden
Re : [Résolu] Désactivation intempestive de la souris USB
moko a écrit :
Guiriden,
Relis le message #2 et le lien : la commande, ce n'est pas "dmesg" !
Excuse moi , j'ai pris quelques raccourcis ! Voici :
xx@pc-yy:~$ dmesg | tail -1 > ~/tail.txt; sleep 45 && echo -e "\n\tLes 2 derniers systèmes de fichiers montés :"; mount -l | tail -2 ; echo -e "\n\tUSB, les puces :"; lsusb | sort; echo -e "\n\tUSB, les modules :"; lsusb -t; echo -e "\n\tDMESG :"; dmesg | grep -A999 "$(sed -r 's/([].[])/\\\1/g' ~/tail.txt)" | grep -Evi "80211|associate|authenticat|dhclient|dhcp|forcedeth|ipv6|link is not ready|network|no link during initialization|phy[0-9]|tx/rx|tx status|ufw|wlan"; echo -e "\n\tContenu de /media :"; ls -la /media; echo -e "\n\tContenu de /media/moi :"; ls -la "/media/$USER"; echo -e "\n\tGestionnaire(s) de fichiers :"; dpkg -l | grep -i "file .*manager" | awk '!/plugin|profile|theme/{print $1,$2,$3,$4}' | column -s' ' -t ; echo -e "\n\tNombre d'éléments de /home/moi ne m'appartenant pas :"; find ~ \( ! -user $USER -o ! -group $USER \) | wc -l; echo -e "\n\tDésignation STABLE des périphériques :"; ls -l /dev/disk/by-id | grep -iEv "\-part[3-9]|total|\-part[1-9][0-9]" | sort -k 10; echo; lsb_release -d; echo -e "\nNoyau en service : $(uname -mr)\n"; echo "Logué en tant que : $(whoami)"
Les 2 derniers systèmes de fichiers montés :
tmpfs on /run/user/1003 type tmpfs (rw,nosuid,nodev,relatime,size=352768k,mode=700,uid=1003,gid=1003)
gvfsd-fuse on /run/user/1003/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1003,group_id=1003)
USB, les puces :
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 067: ID 03f0:0653 Hewlett-Packard
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 004: ID 04a9:1722 Canon, Inc.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 005: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 008 Device 006: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
USB, les modules :
/: Bus 09.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
|__ Port 1: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M
|__ Port 2: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 2: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M
|__ Port 2: Dev 4, If 0, Class=Vendor Specific Class, Driver=, 12M
|__ Port 2: Dev 4, If 1, Class=Printer, Driver=usblp, 12M
|__ Port 2: Dev 4, If 2, Class=Mass Storage, Driver=usb-storage, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M
|__ Port 1: Dev 67, If 0, Class=Vendor Specific Class, Driver=, 480M
|__ Port 1: Dev 67, If 1, Class=Printer, Driver=usblp, 480M
|__ Port 1: Dev 67, If 2, Class=Vendor Specific Class, Driver=, 480M
|__ Port 1: Dev 67, If 3, Class=Vendor Specific Class, Driver=, 480M
DMESG :
[20460.896399] usb 8-1: USB disconnect, device number 4
[20481.269137] usb 8-1: new low-speed USB device number 6 using xhci_hcd
[20481.432513] usb 8-1: New USB device found, idVendor=046d, idProduct=c05a
[20481.432522] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20481.432527] usb 8-1: Product: USB Optical Mouse
[20481.432531] usb 8-1: Manufacturer: Logitech
[20481.432837] usb 8-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[20481.447200] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb8/8-1/8-1:1.0/0003:046D:C05A.0007/input/input17
[20481.447673] hid-generic 0003:046D:C05A.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.1-1/input0
Contenu de /media :
total 24
drwxrwxrwx 6 root root 4096 mars 6 2019 .
drwxr-xr-x 26 root root 4096 avril 18 2019 ..
drwxr-x---+ 5 root root 4096 févr. 21 2019 ww
drwxr-x---+ 2 root root 4096 mars 19 14:24 xx
drwxr-x---+ 2 root root 4096 août 19 2016 yy
drwxr-x---+ 2 root root 4096 oct. 27 2017 zz
Contenu de /media/moi :
total 8
drwxr-x---+ 2 root root 4096 mars 19 14:24 .
drwxrwxrwx 6 root root 4096 mars 6 2019 ..
Gestionnaire(s) de fichiers :
ii nautilus 1:3.18.4.is.3.14.3-0ubuntu6 amd64
ii nautilus-sendto 3.8.2-1ubuntu1 amd64
Nombre d'éléments de /home/moi ne m'appartenant pas :
find: «/home/xx/.dbus»: Permission non accordée
find: «/home/xx/.local/share/Trash/files/sav-ww/.thunderbird/dw5uhrpo.default/gmp»: Permission non accordée
find: «/home/xx/.local/share/Trash/files/sav-ww/.thunderbird/dw5uhrpo.default/blocklists»: Permission non accordée
find: «/home/xx/.local/share/Trash/files/sav-ww/.thunderbird/dw5uhrpo.default/crashes»: Permission non accordée
find: «/home/xx/.local/share/Trash/files/sav-ww/.thunderbird/dw5uhrpo.default/ImapMail»: Permission non accordée
find: «/home/xx/.local/share/Trash/files/sav-ww/.thunderbird/dw5uhrpo.default/saved-telemetry-pings»: Permission non accordée
find: «/home/xx/.local/share/Trash/files/sav-ww/.thunderbird/dw5uhrpo.default/minidumps»: Permission non accordée
find: «/home/xx/.local/share/Trash/files/sav-ww/.thunderbird/dw5uhrpo.default/datareporting»: Permission non accordée
find: «/home/xx/.local/share/Trash/files/sav-ww/.thunderbird/Crash Reports/events»: Permission non accordée
find: «/home/xx/.cache/dconf»: Permission non accordée
97
Désignation STABLE des périphériques :
lrwxrwxrwx 1 root root 9 mars 19 13:51 ata-ST1000DM003-1ER162_Z4Y2ER3E -> ../../sda
lrwxrwxrwx 1 root root 9 mars 19 13:51 wwn-0x5000c5007987cc53 -> ../../sda
lrwxrwxrwx 1 root root 10 mars 19 13:51 ata-ST1000DM003-1ER162_Z4Y2ER3E-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mars 19 13:51 wwn-0x5000c5007987cc53-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mars 19 13:51 ata-ST1000DM003-1ER162_Z4Y2ER3E-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mars 19 13:51 wwn-0x5000c5007987cc53-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 mars 19 13:51 ata-ST3320820AS_5QF7CXF6 -> ../../sdb
lrwxrwxrwx 1 root root 10 mars 19 13:51 ata-ST3320820AS_5QF7CXF6-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 mars 19 16:52 usb-Canon_MP220_series_602496-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 9 mars 19 13:51 ata-TSSTcorp_CDDVDW_SH-224DB_R93E68DF90133E -> ../../sr0
Description: Ubuntu 16.04.6 LTS
Noyau en service : 4.4.0-145-generic x86_64
Logué en tant que : xx
xx@pc-yy:~$ Merci à toi
Ubuntu 22.04 LTS / Ubuntu Touch sur Nexus5
Linux pc-xy 4.15.0-177-generic #186-Ubuntu SMP Thu Apr 14 20:23:07 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kaveri [Radeon R7 Graphics]
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XM-D3H, BIOS F5 01/09/2014
Hors ligne
#9 Le 19/03/2020, à 19:51
- Guiriden
Re : [Résolu] Désactivation intempestive de la souris USB
@Rodcotcot :
Mon pb ressemble effectivement au tien . Si après déconnexion je fais un lsusb, je ne vois plus ma souris .
Ceci dit, si je déconnecte/reconnecte le port , je la retrouve . On peut donc imaginer qu'avec une clé ce serait idem .
Çà ressemble effectivement à un passage en veille !
Ubuntu 22.04 LTS / Ubuntu Touch sur Nexus5
Linux pc-xy 4.15.0-177-generic #186-Ubuntu SMP Thu Apr 14 20:23:07 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kaveri [Radeon R7 Graphics]
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XM-D3H, BIOS F5 01/09/2014
Hors ligne
#10 Le 19/03/2020, à 20:22
- moko138
Re : [Résolu] Désactivation intempestive de la souris USB
A)
Bus 008 Device 005: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 008 Device 006: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
|__ Port 1: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
Déjà, ta souris et ton clavier, branche-les à une prise usb1 ou usb2, parce qu'avec l'usb3 (= prise au moment de la commande, pilotée par xhci_hcd), ça revient à employer un 38 tonnes pour transporter une pomme.
Par exemple, tu pourrais permuter, d'une part la souris et l'imprimante,
d'autre part le clavier et le bluetooth.
= Ensuite, =
B) Vu
Nombre d'éléments de /home/moi ne m'appartenant pas :
find: «/home/xx/.dbus»: Permission non accordée
find: «/home/xx/.local/share/Trash/files/sav-ww/.thunderbird/(...): Permission non accordée
(...)
find: «/home/xx/.cache/dconf»: Permission non accordée
97D'abord exécuter depuis la session normale (pas en session root ni live) :
sudo chown -Rc $USER:$USER /home/$USERcommande à copier-coller telle quelle.
Remarque qu'alors, tu auras retrouvé la possibilité de vider la corbeille normalement : sans sudo.
Et Redémarrer.
Et à l'avenir :
/!\ JAMAIS de sudo nautilus en session installée !
Ni de sudo + aucune autre appli en mode graphique.
En cas de tentation, se reporter à
https://doc.ubuntu-fr.org/utilisateurs/ … privileges,
page où Roschan répertorie des alternatives valides.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#11 Le 19/03/2020, à 20:49
- Guiriden
Re : [Résolu] Désactivation intempestive de la souris USB
@moko :
Merci pour tes conseils .
Ubuntu 22.04 LTS / Ubuntu Touch sur Nexus5
Linux pc-xy 4.15.0-177-generic #186-Ubuntu SMP Thu Apr 14 20:23:07 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kaveri [Radeon R7 Graphics]
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XM-D3H, BIOS F5 01/09/2014
Hors ligne
#12 Le 20/03/2020, à 09:26
- moko138
Re : [Résolu] Désactivation intempestive de la souris USB
Les as-tu appliqués ?
Le problème est-il résolu ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#13 Le 20/03/2020, à 11:03
- Guiriden
Re : [Résolu] Désactivation intempestive de la souris USB
moko a écrit :
Le problème est-il résolu ?
Je n'en sais rien, le pb étant plutôt aléatoire .
Je reviens ici le cas échéant ...
Ubuntu 22.04 LTS / Ubuntu Touch sur Nexus5
Linux pc-xy 4.15.0-177-generic #186-Ubuntu SMP Thu Apr 14 20:23:07 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kaveri [Radeon R7 Graphics]
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XM-D3H, BIOS F5 01/09/2014
Hors ligne