Pages : 1
#1 Le 22/06/2020, à 12:29
- Targol
Taux d'écriture sur HDD qui chute...
Bonjour à tous,
lors de mes recherches pour déterminer les raisons des plantages aléatoires de mon système, j'ai testé mes disques durs et j'ai constaté une chute assez importante de la vitesse d'accès au disque dur.
Voici une capture du test sur 10000 échantillons :
Comme vous pouvez le constater, la vitesse passe de +/-180Mo/s au départ à +/-96Mo/s après 10000 échantillons.
A priori, je n'ai pas eu d'alertes SMART.
Est-ce normal ou mon disque est en train de rendre l'âme ?
Merci d'avance pour tout éclaircissement.
Dernière modification par cqfd93 (Le 22/06/2020, à 13:03)
Ubuntu, c'est bon, mangez-en !!
Hors ligne
#2 Le 22/06/2020, à 12:35
- Targol
Re : Taux d'écriture sur HDD qui chute...
Pour information, voici le résultat de la commande "sudo smartctl -a /dev/sda"
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-37-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1CH162
Serial Number: Z1DB2NGM
LU WWN Device Id: 5 000c50 066a82347
Firmware Version: CC47
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jun 22 13:32:55 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 592) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 109) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail Always - 98352816
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2312
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 140294827
9 Power_On_Hours 0x0032 072 072 000 Old_age Always - 25169
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2281
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 0 0 2
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 067 055 045 Old_age Always - 33 (Min/Max 22/34)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 78
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2481
194 Temperature_Celsius 0x0022 033 045 000 Old_age Always - 33 (0 11 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 25148h+16m+38.396s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 19084898072
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 24744839735
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 90% 25143 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Ubuntu, c'est bon, mangez-en !!
Hors ligne
#3 Le 08/07/2020, à 13:47
- Targol
Re : Taux d'écriture sur HDD qui chute...
Bonjour,
Personne n'a la moindre idée du caractère normal ou pas de ces courbes ?
Ubuntu, c'est bon, mangez-en !!
Hors ligne