#1 Le 13/12/2020, à 19:42
- siddhartha
[Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Bonjour
Je viens de changer mon disque dur et je suis passer sous kubuntu 20.04. J'ai branché l'imprimante et elle s'est installée toute seule.
Seul le scanner ne fonctionne pas.
- uname -a
Linux stephane-laptop 5.4.0-58-generic #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Je viens donc d’installer hplip en suivant https://doc.ubuntu-fr.org/hplip
sudo apt install hplip
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
hplip-data libhpmud0 libimagequant0 libsane-hpaio printer-driver-hpcups printer-driver-postscript-hp python3-olefile python3-pexpect python3-pil python3-ptyprocess python3-renderpm python3-reportlab python3-reportlab-accel
Paquets suggérés :
hplip-doc hplip-gui system-config-printer python-pexpect-doc python-pil-doc python3-pil-dbg python3-renderpm-dbg python3-egenix-mxtexttools python-reportlab-doc
Les NOUVEAUX paquets suivants seront installés :
hplip hplip-data libhpmud0 libimagequant0 libsane-hpaio printer-driver-hpcups printer-driver-postscript-hp python3-olefile python3-pexpect python3-pil python3-ptyprocess python3-renderpm python3-reportlab python3-reportlab-accel
0 mis à jour, 14 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 8660 ko/9362 ko dans les archives.
Après cette opération, 22,0 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] O
Réception de :1 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 hplip-data all 3.20.3+dfsg0-2 [6427 kB]
Réception de :2 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 python3-ptyprocess all 0.6.0-1ubuntu1 [13,3 kB]
Réception de :3 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 python3-pexpect all 4.6.0-1build1 [44,6 kB]
Réception de :4 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 libimagequant0 amd64 2.12.2-1.1 [31,4 kB]
Réception de :5 http://fr.archive.ubuntu.com/ubuntu focal-updates/main amd64 python3-pil amd64 7.0.0-4ubuntu0.1 [362 kB]
Réception de :6 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 python3-reportlab-accel amd64 3.5.34-1ubuntu1 [19,4 kB]
Réception de :7 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 python3-reportlab all 3.5.34-1ubuntu1 [546 kB]
Réception de :8 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 printer-driver-postscript-hp amd64 3.20.3+dfsg0-2 [1122 kB]
Réception de :9 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 python3-olefile all 0.46-2 [33,7 kB]
Réception de :10 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 python3-renderpm amd64 3.5.34-1ubuntu1 [60,4 kB]
8660 ko réceptionnés en 6s (1333 ko/s)
Sélection du paquet hplip-data précédemment désélectionné.
(Lecture de la base de données... 239835 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../00-hplip-data_3.20.3+dfsg0-2_all.deb ...
Dépaquetage de hplip-data (3.20.3+dfsg0-2) ...
Sélection du paquet libhpmud0:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../01-libhpmud0_3.20.3+dfsg0-2_amd64.deb ...
Dépaquetage de libhpmud0:amd64 (3.20.3+dfsg0-2) ...
Sélection du paquet libsane-hpaio:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../02-libsane-hpaio_3.20.3+dfsg0-2_amd64.deb ...
Dépaquetage de libsane-hpaio:amd64 (3.20.3+dfsg0-2) ...
Sélection du paquet printer-driver-hpcups précédemment désélectionné.
Préparation du dépaquetage de .../03-printer-driver-hpcups_3.20.3+dfsg0-2_amd64.deb ...
Dépaquetage de printer-driver-hpcups (3.20.3+dfsg0-2) ...
Sélection du paquet python3-ptyprocess précédemment désélectionné.
Préparation du dépaquetage de .../04-python3-ptyprocess_0.6.0-1ubuntu1_all.deb ...
Dépaquetage de python3-ptyprocess (0.6.0-1ubuntu1) ...
Sélection du paquet python3-pexpect précédemment désélectionné.
Préparation du dépaquetage de .../05-python3-pexpect_4.6.0-1build1_all.deb ...
Dépaquetage de python3-pexpect (4.6.0-1build1) ...
Sélection du paquet libimagequant0:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../06-libimagequant0_2.12.2-1.1_amd64.deb ...
Dépaquetage de libimagequant0:amd64 (2.12.2-1.1) ...
Sélection du paquet python3-pil:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../07-python3-pil_7.0.0-4ubuntu0.1_amd64.deb ...
Dépaquetage de python3-pil:amd64 (7.0.0-4ubuntu0.1) ...
Sélection du paquet python3-reportlab-accel:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../08-python3-reportlab-accel_3.5.34-1ubuntu1_amd64.deb ...
Dépaquetage de python3-reportlab-accel:amd64 (3.5.34-1ubuntu1) ...
Sélection du paquet python3-reportlab précédemment désélectionné.
Préparation du dépaquetage de .../09-python3-reportlab_3.5.34-1ubuntu1_all.deb ...
Dépaquetage de python3-reportlab (3.5.34-1ubuntu1) ...
Sélection du paquet hplip précédemment désélectionné.
Préparation du dépaquetage de .../10-hplip_3.20.3+dfsg0-2_amd64.deb ...
Dépaquetage de hplip (3.20.3+dfsg0-2) ...
Sélection du paquet printer-driver-postscript-hp précédemment désélectionné.
Préparation du dépaquetage de .../11-printer-driver-postscript-hp_3.20.3+dfsg0-2_amd64.deb ...
Dépaquetage de printer-driver-postscript-hp (3.20.3+dfsg0-2) ...
Sélection du paquet python3-olefile précédemment désélectionné.
Préparation du dépaquetage de .../12-python3-olefile_0.46-2_all.deb ...
Dépaquetage de python3-olefile (0.46-2) ...
Sélection du paquet python3-renderpm:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../13-python3-renderpm_3.5.34-1ubuntu1_amd64.deb ...
Dépaquetage de python3-renderpm:amd64 (3.5.34-1ubuntu1) ...
Paramétrage de python3-renderpm:amd64 (3.5.34-1ubuntu1) ...
Paramétrage de python3-olefile (0.46-2) ...
Paramétrage de hplip-data (3.20.3+dfsg0-2) ...
Paramétrage de printer-driver-postscript-hp (3.20.3+dfsg0-2) ...
Paramétrage de python3-reportlab-accel:amd64 (3.5.34-1ubuntu1) ...
Paramétrage de libimagequant0:amd64 (2.12.2-1.1) ...
Paramétrage de libhpmud0:amd64 (3.20.3+dfsg0-2) ...
Paramétrage de libsane-hpaio:amd64 (3.20.3+dfsg0-2) ...
Paramétrage de python3-ptyprocess (0.6.0-1ubuntu1) ...
Paramétrage de python3-pil:amd64 (7.0.0-4ubuntu0.1) ...
Paramétrage de python3-pexpect (4.6.0-1build1) ...
Paramétrage de python3-reportlab (3.5.34-1ubuntu1) ...
Paramétrage de printer-driver-hpcups (3.20.3+dfsg0-2) ...
Paramétrage de hplip (3.20.3+dfsg0-2) ...
Creating/updating hplip user account...
Traitement des actions différées (« triggers ») pour libc-bin (2.31-0ubuntu9.1) ...
Traitement des actions différées (« triggers ») pour man-db (2.9.1-1) ...
Traitement des actions différées (« triggers ») pour dbus (1.12.16-2ubuntu2.1) ...
Traitement des actions différées (« triggers ») pour cups (2.3.1-9ubuntu1.1) ...
Quand je lance hp-setup, j'ai bien la fenetre qui s'ouvre mais cela m'indique. A savoir que mon imprimante est bien branché en USB
HP Linux Imaging and Printing System (ver. 3.20.3)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Searching... (bus=usb, search=(None), desc=0)
error: No devices found on bus: usb
J'ai tenté hpsetup -ia
HP Linux Imaging and Printing System (ver. 3.20.3)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
Enter number 0...1 for connection type (q=quit, enter=usb*) ?
Using connection type: usb
error: No device selected/specified or that supports this functionality.
- lsusb m'indique bien que mon imprimante est branchée
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 1bcf:2987 Sunplus Innovation Technology Inc. HD WebCam
Bus 001 Device 004: ID 8087:07dc Intel Corp.
Bus 001 Device 013: ID 03f0:7a11 HP, Inc Photosmart B109a-m
Bus 001 Device 003: ID 046d:c062 Logitech, Inc. M-UAS144 [LS1 Laser Mouse]
Bus 001 Device 002: ID 05ac:1402 Apple, Inc. Ethernet Adapter [A1277]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
J'ai bien fait : sudo apt-get remove ippusbxd, mais rien de mieux...
Je ne vois pas d'où viens le probleme
Dernière modification par Ayral (Le 30/11/2022, à 11:58)
consultant internet / webmaster
www.stephane-desrousseaux.fr
Hors ligne
#3 Le 13/12/2020, à 20:00
- siddhartha
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Si je comprends bien c'est juste un changement de port usb dans les echanges, je viens d'essayer sur mes 3 ports usb, j'ai toujours le meme soucis (J'ai même essayer avec un autre cable usb)
Dernière modification par siddhartha (Le 13/12/2020, à 20:15)
consultant internet / webmaster
www.stephane-desrousseaux.fr
Hors ligne
#4 Le 13/12/2020, à 20:02
- siddhartha
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Par contre j'ai regardé cette page https://forum.kubuntu-fr.org/viewtopic. … #p22207770
Voici ce que je trouve :
- dpkg -l | grep hplip
ii hplip 3.20.3+dfsg0-2 amd64 HP Linux Printing and Imaging System (HPLIP)
ii hplip-data 3.20.3+dfsg0-2 all HP Linux Printing and Imaging - data files
rc hplip-gui 3.20.3+dfsg0-2 all HP Linux Printing and Imaging - GUI utilities (Qt-based)
- hp-check
Saving output in log file: /home/stephane/hp-check.log
HP Linux Imaging and Printing System (ver. 3.20.3)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.4.0-58-generic #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 GNU/Linux
Host: stephane-laptop
Proc: 5.4.0-58-generic #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 GNU/Linux
Distribution: ubuntu 20.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.3
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.3
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 12/13/20 18:58:46
version = 3.20.3
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
dbus DBus - Message bus system REQUIRED - 1.12.16 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - OK -
cups-image CUPS image - CUPS image development files REQUIRED - - OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.8 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.5 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.8.5 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.3 OK -
hpmudext IO-Extension REQUIRED - 3.20.3 OK -
----------------------
| Scan Configuration |
----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Type: Unknown
Device URI: usb://HP/Photosmart%20B109a-m?serial=CN9BSF548G05C7&interface=1
--------------
| PERMISSION |
--------------
error: Unsupported model: Photosmart_B109a-m
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 3
Total Warnings: 0
Done.
Je vais tenter de corriger ces erreurs
consultant internet / webmaster
www.stephane-desrousseaux.fr
Hors ligne
#5 Le 13/12/2020, à 20:10
- siddhartha
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Je suis surpris de cette erreur :
--------------
| PERMISSION |
--------------
error: Unsupported model: Photosmart_B109a-m
D'autre part, je ne sais pas comment résoudre les dépendances requises absentes :
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
- sudo apt install libcups2
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
libcups2 est déjà la version la plus récente (2.3.1-9ubuntu1.1).
libcups2 passé en « installé manuellement ».
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
- sudo apt install python3
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
python3 est déjà la version la plus récente (3.8.2-0ubuntu2).
python3 passé en « installé manuellement ».
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
consultant internet / webmaster
www.stephane-desrousseaux.fr
Hors ligne
#6 Le 13/12/2020, à 21:17
- grigouille
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Quel est le modèle de l'imprimante ?
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#7 Le 13/12/2020, à 21:27
- siddhartha
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Quel est le modèle de l'imprimante ?
HP PhotoSmart All-in-one Printer - b109
consultant internet / webmaster
www.stephane-desrousseaux.fr
Hors ligne
#8 Le 13/12/2020, à 23:54
- titi89
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
bonjour,
j'ai la même imprimante , je suis sous manjaro et je viens de galérer pour l'installation avec hplip 3.20.9 sur pc portable directement en wifi
alors que je n'ai jamais eu de soucis que ce soit sous ubuntu ou autre.
essaye avec hplip-gui et vérifit que le fichier ppd doit être : hp-photosmart_wireless_b109n-z.ppd.gz ensuite le scan n'a pas fonctionné au premier essai redémare chez moi il fonctionnait après le redémarrage
j'espère que cela t'aidera
cordialement
Hors ligne
#9 Le 14/12/2020, à 00:40
- Coeur Noir
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Curieux, je viens d'avoir un pépin équivalent avec une vielle multifonction de chez HP : l'imprimante apparaît immédiatement dans Paramètres Système / Imprimantes
mais elle est invisible dans HPlip-GUI ou HP-Tollbox alors qu'on trouve bien la machine via lsusb.
Impression OK mais partie scanner inopérante ( or c'est ça qui m'intéressait ).
Au final ce qui semble avoir restitué le scanner, c'est d'avoir installé / réinstallé les paquets relatifs au scan de documents sous Ubuntu 20.04 :
Commit Log for Sat Dec 12 22:48:21 2020
Les paquets suivants ont été réinstallés :
libsane (1.0.29-0ubuntu5.2)
libsane-common (1.0.29-0ubuntu5.2)
libsane-hpaio (3.20.3+dfsg0-2)
libsane:i386 (1.0.29-0ubuntu5.2)
xsane (0.999-8ubuntu2)
xsane-common (0.999-8ubuntu2)
J'ai l'impression que l'outil « graphique » HPlip attend des paquets qui n'existent plus sous 20.04.
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#10 Le 14/12/2020, à 10:10
- ares
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
J'ai l'impression que l'outil « graphique » HPlip attend des paquets qui n'existent plus sous 20.04.
Je crois que tu es pas loin de la vérité...
Avec une autre marque d'imprimante, je me souviens que c'était un lien erroné qui bloquait !
Après un changement de version, le lien pointait sur une dépendance ancienne
je suis passer sous kubuntu 20.04
Perso, pourquoi on a ces deux erreurs :
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
J'ai rien trouvé sur le Web...
Le droit d'emmerder Dieu BNF
Hors ligne
#11 Le 14/12/2020, à 10:20
- xubu1957
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#12 Le 14/12/2020, à 10:39
- ares
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Bonjour,
Merci @xubu1957
J'ai trouvé -------> Unable to use HP USB Printer in Ubuntu 20.04 - apear to be hplip issues
Bon, j'ai pas tout lu et je vous quitte...
@+
Le droit d'emmerder Dieu BNF
Hors ligne
#13 Le 14/12/2020, à 10:56
- titi89
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
je suis pas sur que ce soit les messages d'erreur le problême j'ai les messages ci dessus et cela fonctionne chez moi
chez moi j'ai récupéré une vieille version hplip 3.17 et j'ai installé l'imprimante ensuite j'ai fait la mise à jour vers 3.20 et c'est bon attention je suis sous manjaro mais les problêmes sont souvent similaires tu peux tenter une manip similaire demande l'avis avant
à grigouille
Hors ligne
#14 Le 14/12/2020, à 14:48
- ares
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed' error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed' error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
je suis pas sur que ce soit les messages d'erreur le problême j'ai les messages ci dessus et cela fonctionne chez moi
(...)
Merci @titi89 pour ce retour avec "manjaro"
Perso, je connais pas "manjaro" (je sais je suis inculte ! )
Le message d'erreur indique que la communication inter-processus ne passe pas.
Sauf erreur d'interprétation, la réponse de @siddhartha à 19:10, indique aussi un prb d'incompatibilité de communication inter-processus.
Ce soir, je vais essayer de comprendre ce qu'il se passe dans ce "bordel"...
Attention, je ne prétends pas être sur la « bonne piste », donc continuer de chercher !
Bonne chance.
Le droit d'emmerder Dieu BNF
Hors ligne
#15 Le 14/12/2020, à 15:57
- titi89
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
sudo apt install cups cups-client
sudo adduser $USER lpadmin
sudo service start ou restart
puis relancer l'installation avec hplip-gui ou hp-setup
ce serait peut-être à essayer attend un autre avis pour les commandes je suis plus très sur
Hors ligne
#16 Le 14/12/2020, à 19:51
- siddhartha
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Merci à tous pour les conseils et les explications... par contre comme il y a beaucoup d'interrogations, je vais attendre un peu pour savoir vers quoi m'orienter
consultant internet / webmaster
www.stephane-desrousseaux.fr
Hors ligne
#17 Le 14/12/2020, à 21:58
- grigouille
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Normalement cette imprimante n'a pas besoin du plugin mais bon, tu peux toujours tenter de l'installer :
hp-plugin -i
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#18 Le 14/12/2020, à 23:49
- siddhartha
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Normalement cette imprimante n'a pas besoin du plugin mais bon, tu peux toujours tenter de l'installer :
hp-plugin -i
J'ai installé le plugin :
HP Linux Imaging and Printing System (ver. 3.20.3)
Plugin Download and Install Utility ver. 2.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.20.3)
Plugin Download and Install Utility ver. 2.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
-----------------------------------------
| PLUG-IN INSTALLATION FOR HPLIP 3.20.3 |
-----------------------------------------
Option Description
---------- --------------------------------------------------
d Download plug-in from HP (recommended)
p Specify a path to the plug-in (advanced)
q Quit hp-plugin (skip installation)
Enter option (d=download*, p=specify path, q=quit) ?
-------------------
| DOWNLOAD PLUGIN |
-------------------
Checking for network connection...
Downloading plug-in from:
Downloading plug-in: [\ ] 0% Importing digital key
----------------------
| INSTALLING PLUG-IN |
----------------------
Creating directory plugin_tmp
Verifying archive integrity... All good.
Uncompressing HPLIP 3.20.3 Plugin Self Extracting Archive..............................................................
HP Linux Imaging and Printing System (ver. 3.20.3)
Plugin Installer ver. 3.0
[...]
Done
Done
Mais toujours la meme erreur :
stephane@stephane-laptop:~$ hp-setup -ia
HP Linux Imaging and Printing System (ver. 3.20.3)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
Enter number 0...1 for connection type (q=quit, enter=usb*) ?
Using connection type: usb
error: No device selected/specified or that supports this functionality.
consultant internet / webmaster
www.stephane-desrousseaux.fr
Hors ligne
#19 Le 15/12/2020, à 10:26
- ares
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Bonjour,
Il semble que le bug soit connu chez HP :
HP Photosmart b109a-m: Scanner not recognised in HPLIP 3.19.
Le bug est absent des versions précédentes Ubuntu.
La solution est donnée par Vier Eck (viereck) ---> ICI
Bonne chance )
Le droit d'emmerder Dieu BNF
Hors ligne
#20 Le 15/12/2020, à 18:44
- siddhartha
Re : [Résolu] Photosmart B109a-m HPLIP No devices found on bus: usb
Bonjour,
Il semble que le bug soit connu chez HP :
HP Photosmart b109a-m: Scanner not recognised in HPLIP 3.19.
Le bug est absent des versions précédentes Ubuntu.
La solution est donnée par Vier Eck (viereck) ---> ICIBonne chance )
Super, merci pour cette trouvaille !
Je viens de rajouter ces lignes au fichier : /usr/share/hplip/data/models/models.dat
[photosmart_b109a-m]
align-type=1
clean-type=1
color-cal-type=0
copy-type=0
embedded-server-type=1
fax-type=0
fw-download=False
icon=Photosmart_C5100.png
io-mfp-mode=3
io-mode=1
io-support=2
job-storage=0
linefeed-cal-type=0
model1=HP Photosmart All-in-One Printer - B109a
model2=HP Photosmart All-in-One Printer - B109c
model3=HP Photosmart All-in-One Printer - B109d
model4=HP Photosmart All-in-One Printer - B109e
monitor-type=0
panel-check-type=1
pcard-type=2
plugin=0
plugin-reason=0
power-settings=0
pq-diag-type=0
r-type=1
r0-agent1-kind=2
r0-agent1-sku=564/564XL
r0-agent1-type=1
r0-agent2-kind=2
r0-agent2-sku=564/564XL
r0-agent2-type=4
r0-agent3-kind=2
r0-agent3-sku=564/564XL
r0-agent3-type=5
r0-agent4-kind=2
r0-agent4-sku=564/564XL
r0-agent4-type=6
r1-agent1-kind=2
r1-agent1-sku=564/564XL
r1-agent1-type=1
r1-agent2-kind=2
r1-agent2-sku=564/564XL
r1-agent2-type=4
r1-agent3-kind=2
r1-agent3-sku=564/564XL
r1-agent3-type=5
r1-agent4-kind=2
r1-agent4-sku=564/564XL
r1-agent4-type=6
r2-agent1-kind=2
r2-agent1-sku=364/364XL
r2-agent1-type=1
r2-agent2-kind=2
r2-agent2-sku=364/364XL
r2-agent2-type=4
r2-agent3-kind=2
r2-agent3-sku=364/364XL
r2-agent3-type=5
r2-agent4-kind=2
r2-agent4-sku=364/364XL
r2-agent4-type=6
r4-agent1-kind=2
r4-agent1-sku=178/178XL
r4-agent1-type=1
r4-agent2-kind=2
r4-agent2-sku=178/178XL
r4-agent2-type=4
r4-agent3-kind=2
r4-agent3-sku=178/178XL
r4-agent3-type=5
r4-agent4-kind=2
r4-agent4-sku=178/178XL
r4-agent4-type=6
r8-agent1-kind=2
r8-agent1-sku=862/862XL
r8-agent1-type=1
r8-agent2-kind=2
r8-agent2-sku=862/862XL
r8-agent2-type=4
r8-agent3-kind=2
r8-agent3-sku=862/862XL
r8-agent3-type=5
r8-agent4-kind=2
r8-agent4-sku=862/862XL
r8-agent4-type=6
scan-src=1
scan-type=1
status-battery-check=0
status-dynamic-counters=2
status-type=2
support-released=True
support-subtype=219b2b
support-type=2
support-ver=3.9.10
tech-class=Stabler
family-class=PCL3-Class1B
tech-subclass=Normal
tech-type=2
usb-pid=7a11
usb-vid=3f0
wifi-config=0
J'ai pu installer facilement l'imprimante et le scanner....
Est que HP a voulu initier une sorte d'obsolescence en enlevant plusieurs anciens modeles de la liste des imprimantes ?
consultant internet / webmaster
www.stephane-desrousseaux.fr
Hors ligne