Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 23/02/2021, à 08:47

mommy

Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Bonjour,

Je ne parviens plus à ouvrir mon ordi du premier coup. Depuis 2 ou 3 jours je dois le fermer manuellement et l'ouvrir à nouveau, et souvent, faire la manipe à plusieurs reprises.
La souris est gélee, et finalement tout mon ordi.
Parfois, la souris et l'ordi fonctionnent pour une courte durée (genre 15 secondes).

Je suis (presque) désespéree. SVP que dois-je faire ?   

Merci.

Mommy.

Dernière modification par mommy (Le 22/03/2021, à 17:46)

Hors ligne

#2 Le 23/02/2021, à 09:36

malbo

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Bonjour,
Est-ce que tu peux faire un Boot-info depuis une session de ton Ubuntu et donner l'URL de ce Boot-info dans ta réponse ?

EDIT : si tu ne peux pas le faire depuis une session de ton Ubuntu installé, je te propose de le faire depuis une session live de Ubuntu 20.04 (ordi démarré sur la LiveUSB Ubuntu 20.04, sélection "Essayer Ubuntu")

Dernière modification par malbo (Le 23/02/2021, à 09:40)

Hors ligne

#3 Le 23/02/2021, à 16:27

mommy

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Bonjour Malbo,

Oui, certainement pour le Boot-info. STP dis-moi quoi/comment faire because je suis very débutante. Merci.

Mommy.

Hors ligne

#4 Le 23/02/2021, à 16:57

mommy

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Voici le rapport :

boot-info-4ppa125                                              [20210223_1648]

============================== Boot Info Summary ===============================

=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
    the same hard drive for core.img. core.img is at this location and looks
    for (,msdos1)/boot/grub. It also embeds following components:
   
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
=> FreeDOS (eXtended FDisk) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:
    Operating System:  Ubuntu 20.04.2 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info:

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows XP: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files:       


================================ 1 OS detected =================================

OS#1:   L'OS actuellement utilisé - Ubuntu 20.04.2 LTS CurrentSession on sda1

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-65-generic root=UUID=5994cf52-7694-4227-8202-092c4394ba65 ro quiet splash vt.handoff=7


===================================== UEFI =====================================

This installed-session is not in EFI-mode.
EFI in dmesg.
[    0.011299] ACPI: UEFI 0x00000000787B8000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011360] ACPI: UEFI 0x00000000787A5000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    3.247272] fb0: EFI VGA frame buffer device
[   27.615636] fb0: switching to inteldrmfb from EFI VGA



============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda    : notGPT,    no-BIOSboot,    has-noESP,     not-usb,    not-mmc, has-os,    2048 sectors * 512 bytes
sdb    : notGPT,    no-BIOSboot,    has---ESP,     usb-disk,    not-mmc, no-os,    63 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda1    : is-os,    64, apt-get,    grub-pc ,    grub2,    grub-install,    grubenv-ok,    update-grub,    farbios
sdb1    : no-os,    32, nopakmgr,    no-docgrub,    nogrub,    nogrubinstall,    no-grubenv,    noupdategrub,    not-far

Partitions info (2/3): _________________________________________________________

sda1    : isnotESP,    fstab-without-efi,    no-nt,    no-winload,    no-recov-nor-hid,    no-bmgr,    notwinboot
sdb1    : is---ESP,    part-has-no-fstab,    no-nt,    no-winload,    no-recov-nor-hid,    no-bmgr,    notwinboot

Partitions info (3/3): _________________________________________________________

sda1    : not-sepboot,    with-boot,    fstab-without-boot,    not-sep-usr,    with--usr,    fstab-without-usr,    std-grub.d,    sda
sdb1    : not-sepboot,    no-boot,    part-has-no-fstab,    not-sep-usr,    no---usr,    part-has-no-fstab,    std-grub.d,    sdb

fdisk -l (filtered): ___________________________________________________________

Disk sda: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 0x000da04f
      Boot     Start       End   Sectors   Size Id Type
sda1  *         2048 968620031 968617984 461.9G 83 Linux
sda2       968622078 976771071   8148994   3.9G  5 Extended
sda5       968622080 976771071   8148992   3.9G 82 Linux swap / Solaris
Disk sdb: 7.21 GiB, 7736072192 bytes, 15109516 sectors
Disk identifier: 0x74330904
      Boot Start      End  Sectors  Size Id Type
sdb1  *       63 15107903 15107841  7.2G  b W95 FAT32

parted -lm (filtered): _________________________________________________________

sda:500GB:scsi:512:4096:msdos:ATA WDC WD5000LPVX-2:;
1:1049kB:496GB:496GB:ext4::boot;
2:496GB:500GB:4172MB:::;
5:496GB:500GB:4172MB:linux-swap(v1)::;
sdb:7736MB:scsi:512:512:msdos:Kingston DataTraveler 3.0:;
1:32.3kB:7735MB:7735MB:fat32::boot;

blkid (filtered): ______________________________________________________________

NAME   FSTYPE   UUID                                 PARTUUID                             LABEL    PARTLABEL
sda                                                                                               
├─sda1 ext4     5994cf52-7694-4227-8202-092c4394ba65 000da04f-01                                   
├─sda2                                               000da04f-02                                   
└─sda5 swap     2ffdc31f-68b4-4fab-9d9d-abb59357400b 000da04f-05                                   
sdb                                                                                               
└─sdb1 vfat     13C8-7F88                            74330904-01                          KINGSTON

df (filtered): _________________________________________________________________

        Avail Use% Mounted on
sda1   409.6G   5% /
sdb1     876M  88% /media/mariel/KINGSTON

Mount options: __________________________________________________________________

sda1   rw,relatime,errors=remount-ro
sdb1   ro,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro

====================== sda1/boot/grub/grub.cfg (filtered) ======================

Ubuntu   5994cf52-7694-4227-8202-092c4394ba65
Ubuntu, avec Linux 5.4.0-65-generic   5994cf52-7694-4227-8202-092c4394ba65
Ubuntu, avec Linux 5.4.0-64-generic   5994cf52-7694-4227-8202-092c4394ba65
Ubuntu, avec Linux 3.19.0-65-generic   5994cf52-7694-4227-8202-092c4394ba65
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda1/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=5994cf52-7694-4227-8202-092c4394ba65 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=2ffdc31f-68b4-4fab-9d9d-abb59357400b none            swap    sw              0       0

======================= sda1/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda1: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
280,142898560 = 300,801146880  boot/grub/grub.cfg                             1
372,158569336 = 399,602221056  boot/grub/i386-pc/core.img                     1
258,707172394 = 277,784711168  boot/vmlinuz                                   1
266,956333160 = 286,642180096  boot/vmlinuz-3.19.0-65-generic                 1
257,402484894 = 276,383813632  boot/vmlinuz-5.4.0-64-generic                  1
258,707172394 = 277,784711168  boot/vmlinuz-5.4.0-65-generic                  1
257,402484894 = 276,383813632  boot/vmlinuz.old                               1
255,571025848 = 274,417299456  boot/initrd.img                                5
  46,407222748 = 49,829376000   boot/initrd.img-3.19.0-65-generic              3
  46,383518219 = 49,803923456   boot/initrd.img-5.4.0-64-generic               2
255,571025848 = 274,417299456  boot/initrd.img-5.4.0-65-generic               5
  46,383518219 = 49,803923456   boot/initrd.img.old                            2

===================== sda1: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 17622 sept.  8 12:24 10_linux
-rwxr-xr-x 1 root root 42359 sept.  8 12:24 10_linux_zfs
-rwxr-xr-x 1 root root 12894 sept.  8 12:24 20_linux_xen
-rwxr-xr-x 1 root root 12059 juil. 17  2018 30_os-prober
-rwxr-xr-x 1 root root  1424 sept.  8 12:24 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juin  26  2015 40_custom
-rwxr-xr-x 1 root root   216 juin  26  2015 41_custom


======================== Unknown MBRs/Boot Sectors/etc =========================

Unknown BootLoader on sda2

00000000  1e 00 28 ff 1e 00 28 ff  1e 00 28 ff 1e 00 28 ff  |..(...(...(...(.|
*
000001b0  1e 00 28 ff 1e 00 28 ff  1e 00 28 ff 1e 00 00 fe  |..(...(...(.....|
000001c0  ff ff 82 fe ff ff 02 00  00 00 00 58 7c 00 00 00  |...........X|...|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would purge (in order to fix packages) and reinstall the grub-efi-amd64-signed of
sda1,
using the following options:        sdb1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s  use-standard-efi-file   

Blockers in case of suggested repair: __________________________________________

The current session is in BIOS-compatibility mode. Please disable BIOS-compatibility/CSM/Legacy mode in your UEFI firmware, and use this software from a live-CD (or live-USB) that is compatible with UEFI booting mode. For example, use a live-USB of Boot-Repair-Disk-64bit (www.sourceforge.net/p/boot-repair-cd), after making sure your BIOS is set up to boot USB in EFI mode. This will enable this feature.

Confirmation request before suggested repair: __________________________________

The boot of your PC is in BIOS-compatibility/CSM/Legacy mode. You may want to retry after changing it to EFI mode.
Alternatively, you may want to retry after deactivating the [Separate /usr partition:] option.
Are you sure you want to continue anyway?

Final advice in case of suggested repair: ______________________________________


Please do not forget to make your UEFI firmware boot on the L'OS actuellement utilisé - Ubuntu 20.04.2 LTS CurrentSession entry (sdb1/efi/****/shim****.efi (**** will be updated in the final message) file) !
The boot of your PC is in BIOS-compatibility/CSM/Legacy mode. You may want to retry after changing it to UEFI mode.

Hors ligne

#5 Le 23/02/2021, à 17:40

malbo

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Tout me parait correct dans ce Boot-info.
Peux-tu faire ce que j'explique dans ce post pour qu'on ait l'état de ton disque dur : https://forum.ubuntu-fr.org/viewtopic.php?id=1988280
EDIT : ton disque dur à tester, c'est /dev/sda donc la commande à passer à l'étape 3 du tuto, est la suivante :

sudo smartctl -a /dev/sda 

Dernière modification par malbo (Le 23/02/2021, à 17:43)

Hors ligne

#6 Le 23/02/2021, à 17:43

mommy

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Hors ligne

#7 Le 23/02/2021, à 17:46

malbo

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Je colle le Boot-info dont tu as donné l'URL dans ton post #6 :

boot-info-4ppa125                                              [20210223_1736]

============================== Boot Info Summary ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 20.04.2 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 


================================ 1 OS detected =================================

OS#1:   L'OS actuellement utilisé - Ubuntu 20.04.2 LTS CurrentSession on sda1

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-65-generic root=UUID=5994cf52-7694-4227-8202-092c4394ba65 ro quiet splash vt.handoff=7


===================================== UEFI =====================================

This installed-session is not in EFI-mode.
EFI in dmesg.
[    0.011352] ACPI: UEFI 0x00000000787B8000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011413] ACPI: UEFI 0x00000000787A5000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    3.243531] fb0: EFI VGA frame buffer device
[   34.716189] fb0: switching to inteldrmfb from EFI VGA



============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda	: notGPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda1	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios

Partitions info (2/3): _________________________________________________________

sda1	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sda1	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda

fdisk -l (filtered): ___________________________________________________________

Disk sda: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 0x000da04f
      Boot     Start       End   Sectors   Size Id Type
sda1  *         2048 968620031 968617984 461.9G 83 Linux
sda2       968622078 976771071   8148994   3.9G  5 Extended
sda5       968622080 976771071   8148992   3.9G 82 Linux swap / Solaris

parted -lm (filtered): _________________________________________________________

sda:500GB:scsi:512:4096:msdos:ATA WDC WD5000LPVX-2:;
1:1049kB:496GB:496GB:ext4::boot;
2:496GB:500GB:4172MB:::;
5:496GB:500GB:4172MB:linux-swap(v1)::;

blkid (filtered): ______________________________________________________________

NAME   FSTYPE   UUID                                 PARTUUID                             LABEL PARTLABEL
sda                                                                                             
├─sda1 ext4     5994cf52-7694-4227-8202-092c4394ba65 000da04f-01                                
├─sda2                                               000da04f-02                                
└─sda5 swap     2ffdc31f-68b4-4fab-9d9d-abb59357400b 000da04f-05                                

df (filtered): _________________________________________________________________

        Avail Use% Mounted on
sda1   409.6G   5% /

Mount options: __________________________________________________________________

sda1   rw,relatime,errors=remount-ro

====================== sda1/boot/grub/grub.cfg (filtered) ======================

Ubuntu   5994cf52-7694-4227-8202-092c4394ba65
Ubuntu, avec Linux 5.4.0-65-generic   5994cf52-7694-4227-8202-092c4394ba65
Ubuntu, avec Linux 5.4.0-64-generic   5994cf52-7694-4227-8202-092c4394ba65
Ubuntu, avec Linux 3.19.0-65-generic   5994cf52-7694-4227-8202-092c4394ba65
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda1/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=5994cf52-7694-4227-8202-092c4394ba65 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=2ffdc31f-68b4-4fab-9d9d-abb59357400b none            swap    sw              0       0

======================= sda1/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda1: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 267,575267792 = 287,306756096  boot/grub/grub.cfg                             2
 372,158569336 = 399,602221056  boot/grub/i386-pc/core.img                     1
 258,707172394 = 277,784711168  boot/vmlinuz                                   1
 266,956333160 = 286,642180096  boot/vmlinuz-3.19.0-65-generic                 1
 257,402484894 = 276,383813632  boot/vmlinuz-5.4.0-64-generic                  1
 258,707172394 = 277,784711168  boot/vmlinuz-5.4.0-65-generic                  1
 257,402484894 = 276,383813632  boot/vmlinuz.old                               1
 255,571025848 = 274,417299456  boot/initrd.img                                5
  46,407222748 = 49,829376000   boot/initrd.img-3.19.0-65-generic              3
  46,383518219 = 49,803923456   boot/initrd.img-5.4.0-64-generic               2
 255,571025848 = 274,417299456  boot/initrd.img-5.4.0-65-generic               5
  46,383518219 = 49,803923456   boot/initrd.img.old                            2

===================== sda1: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 17622 sept.  8 12:24 10_linux
-rwxr-xr-x 1 root root 42359 sept.  8 12:24 10_linux_zfs
-rwxr-xr-x 1 root root 12894 sept.  8 12:24 20_linux_xen
-rwxr-xr-x 1 root root 12059 juil. 17  2018 30_os-prober
-rwxr-xr-x 1 root root  1424 sept.  8 12:24 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juin  26  2015 40_custom
-rwxr-xr-x 1 root root   216 juin  26  2015 41_custom


======================== Unknown MBRs/Boot Sectors/etc =========================

Unknown BootLoader on sda2

00000000  1e 00 28 ff 1e 00 28 ff  1e 00 28 ff 1e 00 28 ff  |..(...(...(...(.|
*
000001b0  1e 00 28 ff 1e 00 28 ff  1e 00 28 ff 1e 00 00 fe  |..(...(...(.....|
000001c0  ff ff 82 fe ff ff 02 00  00 00 00 58 7c 00 00 00  |...........X|...|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub2 of
sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s

Hors ligne

#8 Le 23/02/2021, à 19:57

mommy

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Donc qu'est-ce que je dois faire maintenant ?

Hors ligne

#9 Le 23/02/2021, à 20:15

mommy

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Étape3
mariel@mariel-Extensa-2508:~$ sudo smartctl -a /dev/sda
[sudo] Mot de passe de mariel :
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-65-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD5000LPVX-22V0TT0
Serial Number:    WD-WX31A84J6NHL
LU WWN Device Id: 5 0014ee 6afa54921
Firmware Version: 01.01A01
User Capacity:    500107862016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Feb 23 20:13:40 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         ( 9480) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 108) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.
SCT capabilities:            (0x7035)    SCT Status supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   151   140   021    Pre-fail  Always       -       1441
  4 Start_Stop_Count        0x0032   096   096   000    Old_age   Always       -       4757
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   073   073   000    Old_age   Always       -       20419
10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4484
191 G-Sense_Error_Rate      0x0032   001   001   000    Old_age   Always       -       454
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       252
193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       1164293
194 Temperature_Celsius     0x0022   115   103   000    Old_age   Always       -       28
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%         0         -
# 2  Short offline       Completed without error       00%         0         -
# 3  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

mariel@mariel-Extensa-2508:~$

Hors ligne

#10 Le 23/02/2021, à 20:17

mommy

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

mariel@mariel-Extensa-2508:~$ sudo smartctl -a /dev/sda
[sudo] Mot de passe de mariel :
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-65-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD5000LPVX-22V0TT0
Serial Number:    WD-WX31A84J6NHL
LU WWN Device Id: 5 0014ee 6afa54921
Firmware Version: 01.01A01
User Capacity:    500107862016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Feb 23 20:13:40 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

Hors ligne

#11 Le 23/02/2021, à 20:18

mommy

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Est-ce que le problème est réglé ?

Hors ligne

#12 Le 23/02/2021, à 20:28

cqfd93

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Modération

Bonjour,

Pour ajouter toi-même les balises code à tes messages #4, #9 et #10 :

  • Cliquer sur le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message
    1471986854.png


cqfd93

Hors ligne

#13 Le 23/02/2021, à 20:32

mommy

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

J'ai continué avec tes instructions et la fin du message de mon terminal est :

Traitement des actions différées (« triggers ») pour bamfdaemon (0.5.3+18.04.201
80207.2-0ubuntu2) ...
Rebuilding /usr/share/applications/bamf-2.index...
mariel@mariel-Extensa-2508:~$

Donc c'est réglé ?

Hors ligne

#14 Le 23/02/2021, à 20:53

malbo

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Le résultat que tu as collé dans ton post #9 ne fait pas apparaître de problème. Ton disque dur est en forme et je ne pense pas qu'il soit la cause de tes soucis. Je ne sais pas quoi te proposer.

Hors ligne

#15 Le 23/02/2021, à 20:59

mommy

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Merci Malbo,
Pour l'instant, ça marche... depuis au moins 35 minutes sans coupure.
STP est-ce que c'est possible que j'abîme mon ordi quand je le ferme ?
Quand je fais "déconnexion", mon ordi affiche le logo Ubuntu et il ne se ferme que si je le ferme manuellement avec le bouton de mise hors tension ?

Hors ligne

#16 Le 23/02/2021, à 23:34

cqfd93

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Modération

Messages #4, #9, #10 et 13 à corriger (voir message 12), ça ne se fera pas tout seul…


cqfd93

Hors ligne

#17 Le 24/02/2021, à 11:09

mommy

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Donc je commence par quoi STP ?
Par ailleurs, j'ai chargé le DVD d'installation de Ubuntu 12.04. Mais je n'ai rien installé.
Je ne sais pas s'il y a un lien, mais mon ordi remarche.
Merci.

Hors ligne

#18 Le 24/02/2021, à 11:29

malbo

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Selon moi, tout ce que je t'ai demandé de faire jusqu'ici n'est pas susceptible de modifier le fonctionnement de ton ordi. Donc s'il remarche, je n'y suis pour rien. C'est un miracle.

Hors ligne

#19 Le 24/02/2021, à 14:43

cqfd93

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Modération - Rappel

Messages #4, #9, #10 et 13 à corriger (voir message 12), ça ne se fera pas tout seul…


cqfd93

Hors ligne

#20 Le 24/02/2021, à 17:47

mommy

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Bonjour Malbo,

Après des tentatives qui ne m'ont menée à rien : rebondissement dans le "dossier".
J'ai placé mon DVD d'installation Ubuntu 12.04.5 LTS i386 dans le lecteur ce matin vers 11h30, avec l'idée de réinstaller le programme. Je n'ai pas pu, j'imagine qu'on ne peut pas faire machine arrière aussi loin, mais pas grave.

Juste pour te dire que depuis, je n'ai subi AUCUN BUG.
ET si je veux éjecter le DVD le message suivant s'affiche : "Une ou plusieurs applications utilisent actuellement le volume"

STP Est-ce que ça veut dire que je dois réinstaller Ubuntu 20.04? Si oui, j'y vais avec un DVD ou une clé USB?
Est-ce que je peux installer une version plus récente/plus sûre ? Si oui, avec quel lien ? Sachant que "chercher sur votre ordinateur" est inopérant (à cause du DVD probablement).

Merci.

Mommy.

Dernière modification par mommy (Le 24/02/2021, à 20:54)

Hors ligne

#21 Le 01/03/2021, à 10:47

mommy

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Bonjour,
J'ai réinstallé le programme.Ça marche.
Merci pour ton aide.
Bonne journée.
Mommy.

Hors ligne

#22 Le 01/03/2021, à 10:57

xubu1957

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Bonjour,

Voir règles du forum > balises BB code et le premier message du tutoriel Retour utilisable de commande

moko138 a écrit :

1) Les balises-code sont les < > (crochets bleus) de la barre de mise en forme.

1642675956.jpg

Balise CODE :

C'est la balise à utiliser pour donner de longs messages d'erreurs, des contenus de fichiers de configuration, des commandes à taper, etc … Elle permet des messages plus "compacts", et est moins ambiguë que d'autres polices sur certains caractères.

alca94 a écrit :

1539072593.png

Dernière modification par xubu1957 (Le 16/02/2022, à 22:09)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#23 Le 01/03/2021, à 18:31

mommy

Re : Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture [résolu]

Merci beaucoup pour l'information.

Mommy.

Hors ligne