Carte SD bloquée en lecture seule (résolu...)

nicolo1750 · Le 06/09/2021, à 21:40

Bonjour à tous,

J'ai 2 cartes SD qui se sont mises, et bloquées, en lecture seule.
J'ai vu sur le forum que je n'étais pas vraiment le seul à qui ça arrivait, mais aucune des solutions proposées ne fonctionne chez moi.
Rien ne fonctionne même avec Gparted.
Avec Gparted ou avec des lignes de commande, j'ai invariablement toujours le même genre de réponse "impossible, periphérique en lecture seule"...
Je précise que je ne tiens pas à sauvegarder ce qu'il y a dessus...
Je voudrais juste les formater, et éventuellement faire en sorte que ça ne se reproduise pas...

Merci d'avance....

Dernière modification par nicolo1750 (Le 07/09/2021, à 16:14)

geole · Le 06/09/2021, à 22:06

Bonsoir.
Dans un premier temps, débranche tes cartes. Attends 30 secondes.
rebranche une carte. Attends 30 secondes et donne le retour de cette commande qui va tracer le montage de la carte.

dmesg | tail -30

nicolo1750 · Le 06/09/2021, à 22:23

Voici:

fromage@fromage-Inspiron-1750:~$ dmesg | tail -30
[  108.121547] EFLAGS: 00010282 CPU: 1
[  108.121549] EAX: ffffffea EBX: f1330558 ECX: ee8cfcc8 EDX: f8962649
[  108.121550] ESI: edc705c0 EDI: ee014e04 EBP: ee8cfcec ESP: ee8cfc74
[  108.121552]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[  108.121554] CR0: 80050033 CR2: a577f000 CR3: 2eff4000 CR4: 000406f0
[  108.121555] Call Trace:
[  108.121573]  rs_mac80211_tx_status+0x81/0xc0 [iwlmvm]
[  108.121587]  ? iwl_mvm_rs_tx_status+0x8d0/0x8d0 [iwlmvm]
[  108.121627]  rate_control_tx_status+0xa3/0xc0 [mac80211]
[  108.121648]  __ieee80211_tx_status+0x1e4/0x780 [mac80211]
[  108.121669]  ieee80211_tx_status+0x83/0xa0 [mac80211]
[  108.121682]  iwl_mvm_tx_reclaim+0x267/0x360 [iwlmvm]
[  108.121694]  iwl_mvm_rx_ba_notif+0x150/0x290 [iwlmvm]
[  108.121706]  iwl_mvm_rx_common+0x146/0x260 [iwlmvm]
[  108.121723]  ? iwl_pcie_rx_handle+0x24a/0x880 [iwlwifi]
[  108.121733]  iwl_mvm_rx+0x56/0x70 [iwlmvm]
[  108.121743]  ? iwl_mvm_rx_common+0x260/0x260 [iwlmvm]
[  108.121753]  iwl_pcie_rx_handle+0x2f4/0x880 [iwlwifi]
[  108.121758]  ? 0xf8781000
[  108.121768]  iwl_pcie_irq_handler+0x4ee/0xa70 [iwlwifi]
[  108.121776]  irq_thread_fn+0x1d/0x50
[  108.121780]  irq_thread+0x101/0x170
[  108.121783]  ? irq_finalize_oneshot.part.43+0xe0/0xe0
[  108.121787]  ? irq_forced_thread_fn+0x70/0x70
[  108.121792]  kthread+0xd8/0x110
[  108.121795]  ? irq_thread_check_affinity+0x70/0x70
[  108.121798]  ? kthread_bind+0x30/0x30
[  108.121804]  ret_from_fork+0x2e/0x38
[  108.121807] Code: 01 00 00 8b 03 25 40 04 00 00 83 f8 40 74 1e 8b 43 20 0f b6 53 04 8d 4d dc 89 45 b4 8b 43 24 89 45 b8 e8 b5 c2 ff ff 85 c0 74 21 <0f> 0b 8b 45 f0 65 33 05 14 00 00 00 0f 85 26 08 00 00 8d 65 f4
[  108.121834] ---[ end trace 9e1f4a82f055c8cf ]---

serged · Le 07/09/2021, à 07:09

Par hasard, l'encoche de "protection écriture" n'est pas enclenchée ?
en haut à gauche sur la première photo

nicolo1750 · Le 07/09/2021, à 09:35

Bonjour,
Non, ce sont en fait des microSD, il n'y a pas d'interrupteur dessus.
J'en ai essayé une 3e aujourd'hui, et vlan, elle est devenue bloquée aussi...
Vu que je ne trouve absolument aucun moyen d'y acceder, je soupçonne que c'est le "programme" dans la clé, qui la met en lecture seule.
J'ai vu sur le forum qu'il faudrait faire un formatage de "bas niveau". Mais je n'y arrive pas...
Je trouve bizarre de ne pas avoir ce probleme avec les clés USB, ou avec des cartes d'autres format... Tout ces périphériques ne sont pas un peu la même chose pour l'ordi?

geole · Le 07/09/2021, à 09:38

geole a écrit :

Bonsoir.
Dans un premier temps, débranche tes cartes. Attends 30 secondes.
rebranche une carte. Attends 30 secondes et donne le retour de cette commande qui va tracer le montage de la carte.
dmesg | tail -300

Bonjour Il y a un plantage logiciel, peux-tu recommencer la manipulation en extrayant plus de lignes

nicolo1750 · Le 07/09/2021, à 10:09

Bonjour geole,
revoici, avec toutes les lignes que ça me donne:

fromage@fromage-Inspiron-1750:~$ dmesg | tail -300
[    1.831111] usb usb6: Product: UHCI Host Controller
[    1.831113] usb usb6: Manufacturer: Linux 4.15.0-142-generic uhci_hcd
[    1.831115] usb usb6: SerialNumber: 0000:00:1d.0
[    1.831272] hub 6-0:1.0: USB hub found
[    1.831281] hub 6-0:1.0: 2 ports detected
[    1.831675] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.831685] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.831693] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.831718] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[    1.831790] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.831792] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.831794] usb usb7: Product: UHCI Host Controller
[    1.831796] usb usb7: Manufacturer: Linux 4.15.0-142-generic uhci_hcd
[    1.831797] usb usb7: SerialNumber: 0000:00:1d.1
[    1.831959] hub 7-0:1.0: USB hub found
[    1.831969] hub 7-0:1.0: 2 ports detected
[    1.832390] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.832398] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.832406] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.832431] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    1.832500] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.832504] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.832506] usb usb8: Product: UHCI Host Controller
[    1.832507] usb usb8: Manufacturer: Linux 4.15.0-142-generic uhci_hcd
[    1.832509] usb usb8: SerialNumber: 0000:00:1d.2
[    1.832670] hub 8-0:1.0: USB hub found
[    1.832681] hub 8-0:1.0: 2 ports detected
[    1.832953] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.849273] i8042: Detected active multiplexing controller, rev 1.1
[    1.861550] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.861556] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.861606] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.861652] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.861696] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.861887] mousedev: PS/2 mouse device common for all mice
[    1.862728] rtc_cmos 00:03: RTC can wake from S4
[    1.862906] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.862939] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.862953] i2c /dev entries driver
[    1.863078] device-mapper: uevent: version 1.0.3
[    1.863173] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.863216] platform eisa.0: Probing EISA bus 0
[    1.863218] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.863221] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.863222] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.863224] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.863226] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.863228] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.863230] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.863232] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.863233] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.863235] platform eisa.0: EISA: Detected 0 cards
[    1.863242] cpufreq_nforce2: No nForce2 chipset
[    1.873779] ledtrig-cpu: registered to indicate activity on CPUs
[    1.874137] NET: Registered protocol family 10
[    1.882292] Segment Routing with IPv6
[    1.882337] NET: Registered protocol family 17
[    1.882405] Key type dns_resolver registered
[    1.892587] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.961537] mce: Using 6 MCE banks
[    1.961604] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
[    1.961664] microcode: Microcode Update Driver: v2.2.
[    1.961669] Using IPI No-Shortcut mode
[    1.961858] registered taskstats version 1
[    1.961872] Loading compiled-in X.509 certificates
[    2.035604] Loaded X.509 cert 'Build time autogenerated kernel key: 532a63ebf887f998f18dcc3e450fb35abb99aa2f'
[    2.035640] zswap: loaded using pool lzo/zbud
[    2.043107] Key type big_key registered
[    2.043112] Key type trusted registered
[    2.046785] Key type encrypted registered
[    2.046791] AppArmor: AppArmor sha1 policy hashing enabled
[    2.046795] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    2.046805] ima: Allocated hash algorithm: sha1
[    2.046830] evm: HMAC attrs: 0x1
[    2.047244]   Magic number: 5:282:927
[    2.047403] rtc_cmos 00:03: setting system clock to 2021-09-07 08:55:11 UTC (1631004911)
[    2.047540] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.047542] EDD information not available.
[    2.048148] isapnp: No Plug & Play device found
[    2.050240] Freeing unused kernel image memory: 1112K
[    2.064319] Write protecting the kernel text: 9020k
[    2.064377] Write protecting the kernel read-only data: 3492k
[    2.064379] NX-protecting the kernel data: 7364k
[    2.064662] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.064723] x86/mm: Checking user space page tables
[    2.064753] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.087345] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.087529] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.088556] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.156057] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    2.259817] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    2.290410] ahci 0000:00:1f.2: version 3.0
[    2.290802] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.290844] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    2.290847] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems 
[    2.376218] usb 1-5: New USB device found, idVendor=0bda, idProduct=0158
[    2.376222] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.376225] usb 1-5: Product: USB2.0-CRW
[    2.376227] usb 1-5: Manufacturer: Generic
[    2.376228] usb 1-5: SerialNumber: 20071114173400000
[    2.378957] scsi host0: ahci
[    2.379176] scsi host1: ahci
[    2.387820] scsi host2: ahci
[    2.393630] scsi host3: ahci
[    2.393835] scsi host4: ahci
[    2.394007] scsi host5: ahci
[    2.394099] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 24
[    2.394102] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 24
[    2.394103] ata3: DUMMY
[    2.394104] ata4: DUMMY
[    2.394107] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 24
[    2.394110] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 24
[    2.394736] pci 0000:00:00.0: Intel GM45 Chipset
[    2.394763] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    2.395114] pci 0000:00:00.0: detected 32768K stolen memory
[    2.395239] [drm] Memory usable by graphics device = 2048M
[    2.395243] checking generic (e0000000 3f0000) vs hw (e0000000 10000000)
[    2.395245] fb: switching to inteldrmfb from VESA VGA
[    2.395290] Console: switching to colour dummy device 80x25
[    2.395491] [drm] Replacing VGA console driver
[    2.402158] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.402159] [drm] Driver supports precise vblank timestamp query.
[    2.405096] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.457925] [drm] RC6 disabled, disabling runtime PM support
[    2.459410] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    2.459760] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[    2.476578] acpi device:3b: registered as cooling_device2
[    2.477116] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input10
[    2.477255] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    2.492444] fbcon: inteldrmfb (fb0) is primary device
[    2.492570] Console: switching to colour frame buffer device 200x56
[    2.492630] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.516066] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.604034] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    2.644446] random: fast init done
[    2.684058] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e214bacff, max_idle_ns: 440795266118 ns
[    2.706948] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.748094] usb 1-6: New USB device found, idVendor=0c45, idProduct=6400
[    2.748096] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.748098] usb 1-6: Product: Integrated_Webcam_1.3M
[    2.748100] usb 1-6: Manufacturer: CN0R019P724870130BW0
[    2.756649] ata1.00: ATA-8: WDC WD1600BEVT-75ZCT2, 11.01A11, max UDMA/133
[    2.756653] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[    2.758018] ata1.00: configured for UDMA/133
[    2.758224] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEVT-7 1A11 PQ: 0 ANSI: 5
[    2.758548] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.758741] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.758761] sd 0:0:0:0: [sda] Write Protect is off
[    2.758764] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.758797] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.762158] usbcore: registered new interface driver usb-storage
[    2.768207] usbcore: registered new interface driver uas
[    2.774180] ums-realtek 1-5:1.0: USB Mass Storage device detected
[    2.776907] scsi host6: usb-storage 1-5:1.0
[    2.777042] usbcore: registered new interface driver ums-realtek
[    2.795049]  sda: sda1 sda2 < sda5 >
[    2.795750] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.801078] usb 7-1: New USB device found, idVendor=3151, idProduct=1002
[    2.801081] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.801083] usb 7-1: Product: Wireless Device
[    2.801085] usb 7-1: Manufacturer: YICHIP
[    2.815640] hidraw: raw HID events driver (C) Jiri Kosina
[    2.846508] usbcore: registered new interface driver usbhid
[    2.846510] usbhid: USB HID core driver
[    2.852923] hid-generic 0003:3151:1002.0001: hiddev0,hidraw0: USB HID v2.00 Device [YICHIP Wireless Device] on usb-0000:00:1d.1-1/input0
[    2.854631] input: YICHIP Wireless Device as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/0003:3151:1002.0002/input/input11
[    2.913118] hid-generic 0003:3151:1002.0002: input,hiddev1,hidraw1: USB HID v2.00 Mouse [YICHIP Wireless Device] on usb-0000:00:1d.1-1/input1
[    3.071545] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.073337] ata2.00: ATAPI: Optiarc DVD+/-RW AD-7700H, 100A, max UDMA/100
[    3.080209] ata2.00: configured for UDMA/100
[    3.096244] scsi 1:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-7700H 100A PQ: 0 ANSI: 5
[    3.183483] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.183485] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.183800] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.184059] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.275717] psmouse serio2: synaptics: queried max coordinates: x [..5650], y [..4710]
[    3.324041] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[    3.396059] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 581785
[    3.472435] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[    3.497477] ata5: SATA link down (SStatus 0 SControl 300)
[    3.508081] usb 8-1: New USB device found, idVendor=8087, idProduct=07dc
[    3.508084] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.806505] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.806954] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.810958] ata6: SATA link down (SStatus 0 SControl 300)
[    3.811117] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    4.398041] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.999409] random: crng init done
[    5.999411] random: 7 urandom warning(s) missed due to ratelimiting
[    6.059767] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    6.076153] systemd[1]: Detected architecture x86.
[    6.095735] systemd[1]: Set hostname to <fromage-Inspiron-1750>.
[    7.906694] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    7.906915] systemd[1]: Listening on Syslog Socket.
[    7.907026] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.907061] systemd[1]: Reached target Encrypted Volumes.
[    7.907153] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.907459] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.907615] systemd[1]: Listening on Journal Audit Socket.
[    8.711917] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    9.032968] lp: driver loaded but no devices found
[    9.250807] ppdev: user-space parallel port driver
[   10.226367] systemd-journald[244]: Received request to flush runtime journal from PID 1
[   30.728747] audit: type=1400 audit(1631004940.180:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=392 comm="apparmor_parser"
[   30.728753] audit: type=1400 audit(1631004940.180:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=392 comm="apparmor_parser"
[   30.728757] audit: type=1400 audit(1631004940.180:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=392 comm="apparmor_parser"
[   30.728760] audit: type=1400 audit(1631004940.180:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=392 comm="apparmor_parser"
[   30.731260] audit: type=1400 audit(1631004940.180:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=391 comm="apparmor_parser"
[   30.731266] audit: type=1400 audit(1631004940.180:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=391 comm="apparmor_parser"
[   30.738852] audit: type=1400 audit(1631004940.188:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=436 comm="apparmor_parser"
[   30.759667] audit: type=1400 audit(1631004940.208:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=438 comm="apparmor_parser"
[   30.759676] audit: type=1400 audit(1631004940.208:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=438 comm="apparmor_parser"
[   30.759680] audit: type=1400 audit(1631004940.208:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=438 comm="apparmor_parser"
[   31.034473] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   31.118161] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   31.137658] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   31.175841] Intel(R) Wireless WiFi driver for Linux
[   31.175843] Copyright(c) 2003- 2015 Intel Corporation
[   31.208278] Bluetooth: Core ver 2.22
[   31.208308] NET: Registered protocol family 31
[   31.208310] Bluetooth: HCI device and connection manager initialized
[   31.208315] Bluetooth: HCI socket layer initialized
[   31.208319] Bluetooth: L2CAP socket layer initialized
[   31.208326] Bluetooth: SCO socket layer initialized
[   31.267013] usbcore: registered new interface driver btusb
[   31.289099] Bluetooth: hci0: read Intel version: 370710018002030d57
[   31.289102] Bluetooth: hci0: Intel device is already patched. patch num: 57
[   31.350776] iwlwifi 0000:0c:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
[   31.352365] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD71B7X: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   31.352369] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   31.352372] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   31.352374] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   31.352375] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   31.352378] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x18
[   31.352380] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
[   31.367543] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   31.367643] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   31.379971] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   31.436498] iwlwifi 0000:0c:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[   31.437032] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[   31.446898] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input16
[   31.456714] iwlwifi 0000:0c:00.0: base HW address: 80:86:f2:10:17:06
[   31.500109] intel_powerclamp: No package C-state available
[   31.541329] intel_powerclamp: No package C-state available
[   31.627728] media: Linux media interface: v0.10
[   31.702970] Linux video capture interface: v2.00
[   31.716552] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   31.742913] gpio_ich: GPIO from 451 to 511 on gpio_ich
[   31.785026] iwlwifi 0000:0c:00.0 wlp12s0: renamed from wlan0
[   31.813600] uvcvideo: Found UVC 1.00 device Integrated_Webcam_1.3M (0c45:6400)
[   31.821844] input: Integrated_Webcam_1.3M: Integra as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input17
[   31.821975] usbcore: registered new interface driver uvcvideo
[   31.821976] USB Video Class driver (1.1.1)
[   32.398016] Adding 3103740k swap on /dev/sda5.  Priority:-2 extents:1 across:3103740k FS
[   34.793983] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   34.793986] Bluetooth: BNEP filters: protocol multicast
[   34.793993] Bluetooth: BNEP socket layer initialized
[   35.578995] Bluetooth: RFCOMM TTY layer initialized
[   35.579002] Bluetooth: RFCOMM socket layer initialized
[   35.579013] Bluetooth: RFCOMM ver 1.11
[   39.030001] IPv6: ADDRCONF(NETDEV_UP): wlp12s0: link is not ready
[   39.285964] IPv6: ADDRCONF(NETDEV_UP): wlp12s0: link is not ready
[   39.500755] IPv6: ADDRCONF(NETDEV_UP): wlp12s0: link is not ready
[   46.117325] wlp12s0: authenticate with e4:5d:51:fd:a7:5e
[   46.121954] wlp12s0: send auth to e4:5d:51:fd:a7:5e (try 1/3)
[   46.124421] wlp12s0: authenticated
[   46.128099] wlp12s0: associate with e4:5d:51:fd:a7:5e (try 1/3)
[   46.131744] wlp12s0: RX AssocResp from e4:5d:51:fd:a7:5e (capab=0x1411 status=0 aid=1)
[   46.139341] wlp12s0: associated
[   46.169799] IPv6: ADDRCONF(NETDEV_CHANGE): wlp12s0: link becomes ready
[   58.333299] kauditd_printk_skb: 7 callbacks suppressed
[   58.333303] audit: type=1400 audit(1631004967.784:19): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/fromage/.thumbnails/normal/ec082fba6ef44822bc28d06a8948b10a.png" pid=1286 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[   58.483448] audit: type=1400 audit(1631004967.932:20): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/fromage/.thumbnails/normal/0602243376e7ed6c07ed9b176f2dffa6.png" pid=1290 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[  126.485660] sd 6:0:0:0: [sdb] 7864320 512-byte logical blocks: (4.03 GB/3.75 GiB)
[  126.486672] sd 6:0:0:0: [sdb] Write Protect is on
[  126.486675] sd 6:0:0:0: [sdb] Mode Sense: 03 00 80 00
[  126.492297]  sdb: sdb1
[  585.778762] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  585.778768] sd 6:0:0:0: [sdb] tag#0 Sense Key : Not Ready [current] 
[  585.778772] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Medium not present
[  585.778775] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 77 ff 80 00 00 08 00
[  585.778778] print_req_error: I/O error, dev sdb, sector 7864192
[  585.781136] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  585.781141] sd 6:0:0:0: [sdb] tag#0 Sense Key : Not Ready [current] 
[  585.781145] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Medium not present
[  585.781148] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 77 ff 80 00 00 08 00
[  585.781152] print_req_error: I/O error, dev sdb, sector 7864192
[  585.781157] Buffer I/O error on dev sdb, logical block 983024, async page read
[  604.667159] sd 6:0:0:0: [sdb] 7864320 512-byte logical blocks: (4.03 GB/3.75 GiB)
[  604.673177]  sdb: sdb1
[  692.514487] perf: interrupt took too long (2536 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
[  908.896524] perf: interrupt took too long (3179 > 3170), lowering kernel.perf_event_max_sample_rate to 62750
[ 1305.469897] perf: interrupt took too long (3974 > 3973), lowering kernel.perf_event_max_sample_rate to 50250
[ 1332.538354] audit: type=1400 audit(1631006241.585:21): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/fromage/.thumbnails/normal/2cff44b37f352f6f5d3fc03c4bb385f6.png" pid=3148 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 1333.637985] audit: type=1400 audit(1631006242.685:22): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/fromage/.thumbnails/normal/96eeafd0ce1a721468344a0bba86a7e9.png" pid=3152 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 1334.251514] audit: type=1400 audit(1631006243.297:23): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/fromage/.thumbnails/normal/ed947aa3624c68a5154ad8af3d641686.png" pid=3156 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 1334.850558] audit: type=1400 audit(1631006243.897:24): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/fromage/.thumbnails/normal/457b8b0fe809e7dcb571dd6a17b2201c.png" pid=3160 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 1335.460335] audit: type=1400 audit(1631006244.509:25): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/fromage/.thumbnails/normal/081d11265e6ca5bf4720dc304c506b88.png" pid=3164 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 1380.634100] sd 6:0:0:0: [sdb] 7864320 512-byte logical blocks: (4.03 GB/3.75 GiB)
[ 1380.640671]  sdb: sdb1
fromage@fromage-Inspiron-1750:~$

Entre temps, j'ai pu, avec le smartphone de ma copine, formater l'une des cartes, ça n'a pas affiché d'erreur, ça semble avoir marché, mais sur mon ordi, ma carte est toujours en lecture seule...
Si le smartphone a pu la formater, c'est que lui ne la voit pas en lecture seule, non?

Dernière modification par nicolo1750 (Le 07/09/2021, à 10:20)

nicolo1750 · Le 07/09/2021, à 15:32

Sur le smartphone, j'arrive à mettre et a effacer toute sorte de fichier dessus... Donc la carte n'est pas morte.
Sur l'ordi de ma copine qui est sous linux aussi, le probleme est le même que sur mon ordi.
Je n'ai pas d'ordi avec windoz pour essayer...

nicolo1750 · Le 07/09/2021, à 16:13

Ah! le con....! J'ai trouvé....
Il y avait bien un switch, mais sur mon adaptateur miniSD à SD. Et j'avais jamais vu ça...
On en apprend tout les jours...
Bref, ça marche.

geole · Le 07/09/2021, à 16:26

heureusement pour toi qu'il y avait un switch pour enlever la protection d'écriture

[  126.486672] sd 6:0:0:0: [sdb] Write Protect is on

Dernière modification par geole (Le 07/09/2021, à 16:27)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 06/09/2021, à 21:40

Carte SD bloquée en lecture seule (résolu...)

#2 Le 06/09/2021, à 22:06

Re : Carte SD bloquée en lecture seule (résolu...)

#3 Le 06/09/2021, à 22:23

Re : Carte SD bloquée en lecture seule (résolu...)

#4 Le 07/09/2021, à 07:09

Re : Carte SD bloquée en lecture seule (résolu...)

#5 Le 07/09/2021, à 09:35

Re : Carte SD bloquée en lecture seule (résolu...)

#6 Le 07/09/2021, à 09:38

Re : Carte SD bloquée en lecture seule (résolu...)

#7 Le 07/09/2021, à 10:09

Re : Carte SD bloquée en lecture seule (résolu...)

#8 Le 07/09/2021, à 15:32

Re : Carte SD bloquée en lecture seule (résolu...)

#9 Le 07/09/2021, à 16:13

Re : Carte SD bloquée en lecture seule (résolu...)

#10 Le 07/09/2021, à 16:26

Re : Carte SD bloquée en lecture seule (résolu...)

Pied de page des forums