Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 27/10/2021, à 09:32

freex

[résolu] Récupération de grub par KDE neon

Bonjour,

Je suis en multi-boot avec Kubuntu 21.10 et KDE Neon à jour.
Au quotidien, j'utilise Kubuntu

J'aimerais que le grub utilisé par le PC soit celui installé par KDE neon.

Suite à la lecture de cette page Comment restaurer GRUB j'ai essayé ceci sous KDE neon :

sudo os-prober
sudo update-grub
sudo grub-install /dev/sda

mais au démarrage du PC c'est toujours le grub de Kubuntu qui apparaît.

Quelle est le code à utiliser pour choisir un GRUB?

Dernière modification par freex (Le 03/11/2021, à 09:16)


Kubuntu user qui aimerait passer définitivement au bureau standard.

Hors ligne

#2 Le 27/10/2021, à 09:50

Qid

Re : [résolu] Récupération de grub par KDE neon

freex a écrit :

Quelle est le code à utiliser pour choisir un GRUB?

Es-tu bien au clair sur ce que tu veux et as-tu bien fait tes manip à partir de KDE néon ?


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#3 Le 27/10/2021, à 09:54

FrancisFDZ

Re : [résolu] Récupération de grub par KDE neon

Bonjour,
A priori, la dernière commande

sudo grub-install /dev/sda

aurait du installer la version "KDE Neon" comme version de démarrage en écrasant la version "kubuntu". Comment est organisé ton partitionnement ? Un boot-info pourrait être utile

Dernière modification par FrancisFDZ (Le 27/10/2021, à 09:55)


-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]

Hors ligne

#4 Le 27/10/2021, à 09:59

Qid

Re : [résolu] Récupération de grub par KDE neon

FrancisFDZ a écrit :

A priori, la dernière commande

sudo grub-install /dev/sda

aurait du installer la version "KDE Neon" comme version de démarrage en écrasant la version "kubuntu".

Comme je le disais : tout dépend de qui l'a exécuté... Et puis j'ai 2 questions pièges à poser :
- comment déterminer de quel OS provient le GRUB autrement que par la première ligne de boot présentée ?
- pourquoi vouloir un GRUB plutôt que l'autre au delà du choix de la première ligne de boot ?


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#5 Le 27/10/2021, à 10:28

FrancisFDZ

Re : [résolu] Récupération de grub par KDE neon

Sur mon fixe, j'ai 7 versions de linux réparties sur 3 HD; chaque version dispose de son propre grub (installé soit sur le HD correspondant, soit sur la partition "/" de l"OS.
Le démarrage se fait sur le disque choisi dans le bios à cet effet (pour moi, c"est le grub "Ubuntu") et je peux choisir le grub de démarrage soit en changeant de support de démarrage (touche F12 au boot; option courante mais pas universelle), et pour les grub installés ailleurs qu"en MBR j'utilise les options que j'ai créées dans le fichier xx-custom de /etc/grub.d.
Evidemment, tout ceci exige d'être en boot legacy et j'appréhende le jour où je serais contraint de passer à GPT/UEFI.
Tout ceci pour dire que l’utilisation conjointe de plusieurs versions de grub est parfaitement possible, mais demande de l'organisation.
Du coup, pour le cas qui nous occupe ici, il y a lieu de savoir où se trouve(nt) le(s) fichier(s) grub utilisé(s), car je présume que le boot se fait en UEFI (à confirmer) Il me semble que dans ce cas, il peut y avoir plusieurs fichiers "grub" dans la partition de boot, mais je ne connais pas la manip pour les trier.

[Edit] Un boot-info apporterait des informations utiles [/Edit]

Dernière modification par FrancisFDZ (Le 28/10/2021, à 07:40)


-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]

Hors ligne

#6 Le 27/10/2021, à 10:41

Qid

Re : [résolu] Récupération de grub par KDE neon

FrancisFDZ a écrit :

Evidemment, tout ceci exige d'être en boot legacy et j'appréhende le jour où je serais contraint de passer à GPT/UEFI.

En fait non et même bien au contraire : c'est bien plus facile à gérer en uefi... Celà dit je fais allusion à une installation monodisque qui sera présenté par l'uefi de façon clairement nommé presque comme l'est ton multiboot actuel... Dans le cas d'installations multidisque en uefi à mon avis pour être sûr que chaque disque dur fonctionnent de façon autonome il faut qu'il y en ait qu'un seul de branché à la fois au moment de l'installation... Sinon tout risque de se coller dans une unique partition uefi...


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#7 Le 27/10/2021, à 11:06

FrancisFDZ

Re : [résolu] Récupération de grub par KDE neon

Pour sélectionner un logiciel de démarrage en uefi, j'ai trouvé ça :

Il existe plusieurs façons de procéder, notamment:

  • L'utilitaire de configuration EFI - La plupart des EFI fournissent des utilitaires de configuration auxquels vous pouvez accéder en appuyant sur une touche spéciale au démarrage (Esc, Del ou une touche de fonction, généralement; mais quelle clé il s'agit d'un système à l'autre). Celles-ci fournissent souvent, mais pas toujours, un moyen d'ajuster l'ordre de démarrage. Si votre micrologiciel propose une telle option, vous devriez pouvoir l'utiliser pour déplacer GRUB en position supérieure. (GRUB est susceptible d'être appelé ubuntu, étant donné que vous l'avez installé à partir de cette distribution.)

  • Un shell EFI - Vous pouvez utiliser la bcfgcommande dans un shell EFI version 2, comme décrit sur le wiki Arch Linux. Si votre système n'est pas déjà configuré avec un shell facile d'accès, cette approche est probablement plus difficile à utiliser que les autres, mais elle est indépendante du système d'exploitation.

  • EasyUEFI - Le programme Windows EasyUEFI tiers est probablement le moyen le plus simple de faire ce que vous voulez. Vous pouvez cliquer sur l' ubuntuentrée dans la liste d'EasyUEFI et la déplacer vers le haut.

  • bcdedit- La bcdeditcommande Windows peut modifier l'ordre de démarrage basé sur NVRAM. Plus précisément, ouvrir une fenêtre d'invite de commandes administrateur et taper bcdedit /set "{bootmgr}" path \EFI\ubuntu\shimx64.efi(éventuellement suivi par bcdedit /set "{bootmgr}" description "ubuntu"pour garder la description sensible) devrait faire l'affaire.

  • efibootmgr- Cet outil Linux peut ajuster l'ordre de démarrage. Commencez par taper sudo efibootmgrseul pour voir les options. Notez le numéro ( Boot####) associé à l' ubuntuentrée et l'ordre de démarrage actuel (sur la BootOrderligne). Vous pouvez ensuite entrer un nouvel ordre de démarrage avec l' ubuntuentrée en haut en utilisant l' -ooption. Par exemple, si l'ordre de démarrage actuel est 0000 0003 ubuntu0007 0004 et 0007, vous devez taper sudo efibootmgr -o 0007,0000,0003,0004pour ajuster l'ordre de démarrage.

  • refind-mkdefault- Ce script est livré avec rEFInd, et c'est un moyen d'automatiser la procédure précédente. Si vous n'utilisez pas rEFInd, vous devez télécharger le script ici et le rendre exécutable ( chmod a+x refind-mkdefault). Vous devez ensuite l'exécuter en tant que sudo ./refind-mkdefault -L ubuntuou sudo ./refind-mkdefault -L shimx64pour faire de GRUB l'entrée de démarrage par défaut.

Il existe des problèmes potentiels et des complications avec l'une de ces options. Le facteur de complication le plus probable est s'il existe des ubuntuentrées de démarrage anciennes ou alternatives . Il est important que vous déplaciez la bonne à la position supérieure dans l'ordre de démarrage; si vous déplacez le mauvais, vous vous retrouverez avec aucun changement de comportement ou quelque chose de non fonctionnel, ce qui rendrait le démarrage plus difficile. Si vous utilisez efibootmgr, la BootCurrentligne peut vous aider à dire quelle option vous devez définir par défaut.

Il existe d'autres façons de le faire qui sont exagérées. La réinstallation de GRUB (via Boot Repair ou grub-install) devrait faire l'affaire, par exemple. Cependant, ces approches risquent d'endommager une configuration GRUB connue.

Notez également que certains EFI sont bogués et que d'autres problèmes peuvent rendre difficile le démarrage fiable de GRUB. Vous voudrez peut-être consulter ces questions et réponses sur AskUbuntu si vous rencontrez de tels problèmes:

    efibootmanager -o les modifications sont perdues au redémarrage
    Windows 8 supprime Grub comme gestionnaire de démarrage par défaut
    Comment réparer grub? (Comment récupérer Ubuntu après l'installation de Windows?)

(C'est )

Dernière modification par FrancisFDZ (Le 27/10/2021, à 11:15)


-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]

Hors ligne

#8 Le 27/10/2021, à 16:54

freex

Re : [résolu] Récupération de grub par KDE neon

Qid a écrit :
freex a écrit :

Quelle est le code à utiliser pour choisir un GRUB?

Es-tu bien au clair sur ce que tu veux et as-tu bien fait tes manip à partir de KDE néon ?

Oui, comme c'est écrit


Kubuntu user qui aimerait passer définitivement au bureau standard.

Hors ligne

#9 Le 27/10/2021, à 17:07

freex

Re : [résolu] Récupération de grub par KDE neon

FrancisFDZ a écrit :

Bonjour,
A priori, la dernière commande

sudo grub-install /dev/sda

aurait du installer la version "KDE Neon" comme version de démarrage en écrasant la version "kubuntu". Comment est organisé ton partitionnement ? Un boot-info pourrait être utile

Voici un extrait du début :

boot-info-4ppa130                                              [20211027_1801]

============================== Boot Info Summary ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos5)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => No boot loader is installed in the MBR of /dev/sdc.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /efi/Boot/bootx64.efi /efi/Boot/fbx64.efi 
                       /efi/Boot/mmx64.efi /efi/neon/grubx64.efi 
                       /efi/neon/mmx64.efi /efi/neon/shimx64.efi 
                       /efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi 
                       /efi/ubuntu/shimx64.efi /efi/neon/grub.cfg 
                       /efi/ubuntu/grub.cfg /efi/Microsoft/Boot/bootmgfw.efi 
                       /efi/Microsoft/Boot/bootmgr.efi 
                       /efi/Microsoft/Boot/memtest.efi

sda3: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 8 or 10
    Boot files:        /Windows/System32/winload.exe

sda5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda6: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 8 or 10
    Boot files:        /Windows/System32/winload.exe

sda7: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda8: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  KDE neon User - Plasma 25th Anniversary Edition
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub

sda9: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 21.10
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub

sda10: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Unknown
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda11: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda12: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu Hirsute Hippo (development branch)
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub

sdb1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD

sdb2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 8 or 10
    Boot files:        /bootmgr /Windows/System32/winload.exe

sdb3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sdb5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  According to the info in the boot sector, sdb5 starts 
                       at sector 2048.
    Operating System:  
    Boot files:        

sdc1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  -
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        


================================ 6 OS detected =================================

OS#1:   L'OS actuellement utilisé - Ubuntu 21.10 CurrentSession on sda9
OS#2:   Ubuntu Hirsute Hippo (development branch) on sda12
OS#3:   KDE neon User - Plasma 25th Anniversary Edition (20.04) on sda8
OS#4:   Windows 8 or 10 on sda4
OS#5:   Windows 8 or 10 on sda6
OS#6:   Windows 8 or 10 on sdb2

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.13.0-20-generic root=UUID=aa9a050e-bf13-494c-8762-5f05012ddb85 ro quiet splash vt.handoff=7


===================================== UEFI =====================================

BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled.

Kubuntu user qui aimerait passer définitivement au bureau standard.

Hors ligne

#10 Le 27/10/2021, à 17:13

nany

Re : [résolu] Récupération de grub par KDE neon

Bonjour,


freex a écrit :
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.

Tu es en EFI donc la commande est simplement :

sudo grub-install

Après l’avoir exécutée, donne le retour de :

efibootmgr -v

Hors ligne

#11 Le 27/10/2021, à 17:28

freex

Re : [résolu] Récupération de grub par KDE neon

nany a écrit :

Bonjour,


freex a écrit :
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.

Tu es en EFI donc la commande est simplement :

sudo grub-install

Après l’avoir exécutée, donne le retour de :

efibootmgr -v
efibootmgr -v
BootCurrent: 000F
Timeout: 0 seconds
BootOrder: 000F,0001,000C,0013,0012,0000
Boot0000  Windows Boot Manager  HD(2,GPT,76740ca4-4b7a-41ae-afa8-5c0e96c9d6c7,0xfa000,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* neon  HD(2,GPT,76740ca4-4b7a-41ae-afa8-5c0e96c9d6c7,0xfa000,0x32000)/File(\EFI\neon\shimx64.efi)
Boot000C* Hard Drive    BBS(HD,,0x0)AMGOAMNO........o.S.T.1.0.0.0.L.M.0.2.4. .H.N.-.M.1.0.1.M.B.B....................A...........................>..Gd-.;.A..MQ..L.2.S.T.T.9.J.C.A.0.3.7.2.5.7. . . . . . ......AMBO
Boot000F* ubuntu        HD(2,GPT,76740ca4-4b7a-41ae-afa8-5c0e96c9d6c7,0xfa000,0x32000)/File(\EFI\ubuntu\shimx64.efi)
Boot0012* ubuntu        HD(2,GPT,76740ca4-4b7a-41ae-afa8-5c0e96c9d6c7,0xfa000,0x32000)/File(EFI\Ubuntu\grubx64.efi)
Boot0013* CD/DVD Drive  BBS(CDROM,,0x0)AMGOAMNO........o.M.A.T.S.H.I.T.A.D.V.D.-.R.A.M. .U.J.8.B.0....................A...........................>..Gd-.;.A..MQ..L. . . . . . . . .N.Y.6.4. . .6.1.0.2.6.2......AMBO

Kubuntu user qui aimerait passer définitivement au bureau standard.

Hors ligne

#12 Le 27/10/2021, à 17:33

nany

Re : [résolu] Récupération de grub par KDE neon

Ok, passe cette commande :

sudo efibootmgr -o 1,F,C,13,12,0

Et redémarre pour voir si tu as le GRUB de neon.

Hors ligne

#13 Le 27/10/2021, à 19:00

Qid

Re : [résolu] Récupération de grub par KDE neon

nany a écrit :

tu as le GRUB de neon.

"Tu as GRUB qui qui propose néon par défaut" serait plus juste dans ce cas...


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#15 Le 27/10/2021, à 19:54

Qid

Re : [résolu] Récupération de grub par KDE neon

nany a écrit :

Ça n'aide pas... Ou alors je ne sais pas ce qu'on doit y voir...


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#16 Le 27/10/2021, à 20:37

nany

Re : [résolu] Récupération de grub par KDE neon

On doit  y voir, entre autres, le chapitre 4.1 (mais tout est bon à lire). On peut alors comprendre que GRUB, en EFI, est installé dans deux endroits bien distincts (tout comme en LEGACY d’ailleurs). Une première partie dans la partition esp (dans le MBR en LEGACY mais EFI à l’avantage de pouvoir faire cohabiter plusieurs fichiers d’amorçage) dans un répertoire spécifique au système installé. Et la deuxième partie dans la partition racine du système installé (tout comme en LEGACY).

Dans le cas qui nous intéresse, on peut voir :
Boot0001* neon  HD(2,GPT,76740ca4-4b7a-41ae-afa8-5c0e96c9d6c7,0xfa000,0x32000)/File(\EFI\neon\shimx64.efi)

Ce fichier d’amorçage shimx64.efi va lire le fichier grub.cfg qui se trouve à ses côtés. Et ce fichier lui dit d’aller lire l’autre grub.cfg qui se trouve dans la partition du système installé (neon en l’occurrence).

Je maintiens donc qu’il s’agit du GRUB de neon et pas un autre.

Hors ligne

#17 Le 27/10/2021, à 20:54

Qid

Re : [résolu] Récupération de grub par KDE neon

nany a écrit :

Dans le cas qui nous intéresse, on peut voir :
Boot0001* neon  HD(2,GPT,76740ca4-4b7a-41ae-afa8-5c0e96c9d6c7,0xfa000,0x32000)/File(\EFI\neon\shimx64.efi)

Ce fichier d’amorçage shimx64.efi va lire le fichier grub.cfg qui se trouve à ses côtés. Et ce fichier lui dit d’aller lire l’autre grub.cfg qui se trouve dans la partition du système installé (neon en l’occurrence).

Je maintiens donc qu’il s’agit du GRUB de neon et pas un autre.

Tu as raison sur un point... Mais un update-grub de kubuntu ne fera pas tout voler en éclat ? Nb : jouer sur la priorité de l'uefi est différent de jouer sur la priorité des différents GRUB


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#18 Le 27/10/2021, à 21:18

nany

Re : [résolu] Récupération de grub par KDE neon

Qid a écrit :

Mais un update-grub de kubuntu ne fera pas tout voler en éclat ?

Un update-grub dans Kubuntu ne modifie que le grub.cfg de sa partition.

Qid a écrit :

Nb : jouer sur la priorité de l'uefi est différent de jouer sur la priorité des différents GRUB

Eh bien non. car la priorité de l’UEFI lance un fichier .efi bien précis qui lui-même lance un GRUB bien précis.

Allez, je suis sympa, je te donne un lien vers la traduction française du manuel : http://tradinfo.e-monsite.com/medias/fi … boot-2.pdf.

Hors ligne

#19 Le 27/10/2021, à 22:23

freex

Re : [résolu] Récupération de grub par KDE neon

nany a écrit :

Ok, passe cette commande :

sudo efibootmgr -o 1,F,C,13,12,0

Et redémarre pour voir si tu as le GRUB de neon.

Malheureusement le grub de Kubuntu a décidé de rester collé comme un vieux chewing-gum

...mais si mes souvenirs sont bons, l'installation de KDE néon est un peu différente de Kubuntu, je me demande s'il m'avait laissé le choix de l'endroit où placer le GRUB...
Soit, retour case départ hmm


Kubuntu user qui aimerait passer définitivement au bureau standard.

Hors ligne

#20 Le 28/10/2021, à 00:53

nany

Re : [résolu] Récupération de grub par KDE neon

freex a écrit :

Malheureusement le grub de Kubuntu a décidé de rester collé comme un vieux chewing-gum

Dans neon, donne les retours de :

efibootmgr
sudo cat /boot/efi/EFI/neon/grub.cfg
sudo cat /boot/grub/grub.cfg

Hors ligne

#21 Le 28/10/2021, à 06:04

Qid

Re : [résolu] Récupération de grub par KDE neon

nany a écrit :
Qid a écrit :

Nb : jouer sur la priorité de l'uefi est différent de jouer sur la priorité des différents GRUB

Eh bien non. car la priorité de l’UEFI lance un fichier .efi bien précis qui lui-même lance un GRUB bien précis.

Non mais ça là dessus on est bien d'accord... Mais donc les questions à se poser sont dans l'ordre :
- est-ce que l'uefi pointe sur le bon GRUB
- est-ce que les GRUB sont bien configurés proprement
Et perso c'est bien sur ce second point que j'ai des doutes... Mais normalement en regardant le Bootinfo dans son ensemble on devrait être au clair

édition pour fusion de post :

freex a écrit :
FrancisFDZ a écrit :

Un boot-info pourrait être utile

Voici un extrait du début

C'est une blague ? Pourquoi tu ne l'as pas mis en entier pour qu'on puisse avoir justement toutes les info qu'il donne et dont on pourrait avoir besoin pour t'aider ?

Dernière modification par Qid (Le 28/10/2021, à 06:13)


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#22 Le 28/10/2021, à 06:24

nany

Re : [résolu] Récupération de grub par KDE neon

Qid a écrit :

Mais normalement en regardant le Bootinfo dans son ensemble on devrait être au clair

Oui, si on avait eu l’intégralité du boot-info on se poserait moins de questions.
C’est d’ailleurs pour ça que j’ai demandé des compléments d’information (normalement visibles dans un rapport complet).

Dernière modification par nany (Le 28/10/2021, à 06:24)

Hors ligne

#23 Le 28/10/2021, à 06:32

Qid

Re : [résolu] Récupération de grub par KDE neon

nany a écrit :

C’est d’ailleurs pour ça que j’ai demandé des compléments d’information (normalement visibles dans un rapport complet).

Je n'ai lu attentivement ton message de 01:53:45 qu'après avoir posté mon précédent... Là on est donc sur la même longueur d'onde wink


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#24 Le 28/10/2021, à 07:40

freex

Re : [résolu] Récupération de grub par KDE neon

nany a écrit :
freex a écrit :

Malheureusement le grub de Kubuntu a décidé de rester collé comme un vieux chewing-gum

Dans neon, donne les retours de :

efibootmgr
sudo cat /boot/efi/EFI/neon/grub.cfg
sudo cat /boot/grub/grub.cfg
efibootmgr
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,000F,000C,0012,0000
Boot0000  Windows Boot Manager
Boot0001* neon
Boot000C* Hard Drive 
Boot000F* ubuntu
Boot0012* ubuntu

Le 0013 n'y est plus car j'avais testé via NEON la commande précédente suggérée et cela n'avait pas fontionné. Je me suis dit que peut-être fallait-il la lancer dans Kubuntu. Sur cet OS, une erreur est apparue (un truc comme "pas d'entré pour 0013"), du coup j'ai enlevé le 0013 de la commande et je l'ai relancée via NEON.


sudo cat /boot/efi/EFI/neon/grub.cfg
search.fs_uuid 7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d root hd0,gpt8 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
 cat /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${initrdfail}" = 2 ]; then
   set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
   set next_entry="${prev_entry}"
   set prev_entry=
   save_env prev_entry
   if [ "${next_entry}" ]; then
      set initrdfail=2
   fi
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="${saved_entry}"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function initrdfail {
    if [ -n "${have_grubenv}" ]; then if [ -n "${partuuid}" ]; then
      if [ -z "${initrdfail}" ]; then
        set initrdfail=1
        if [ -n "${boot_once}" ]; then
          set prev_entry="${default}"
          save_env prev_entry
        fi
      fi
      save_env initrdfail
    fi; fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8  7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d
else
  search --no-floppy --fs-uuid --set=root 7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_BE
  insmod gettext
fi
terminal_output gfxterm
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8  7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d
else
  search --no-floppy --fs-uuid --set=root 7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d
fi
insmod gfxmenu
loadfont ($root)/boot/grub/themes/breeze/unifont-bold-16.pf2
loadfont ($root)/boot/grub/themes/breeze/unifont-regular-14.pf2
loadfont ($root)/boot/grub/themes/breeze/unifont-regular-16.pf2
loadfont ($root)/boot/grub/themes/breeze/unifont-regular-32.pf2
insmod png
set theme=($root)/boot/grub/themes/breeze/theme.txt
export theme
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=4
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 4 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux_proxy ###

function gfxmode {
        set gfxpayload="${1}"
        if [ "${1}" = "keep" ]; then
                set vt_handoff=vt.handoff=7
        else
                set vt_handoff=
        fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode



menuentry "Neon 20.04 [P8]" --class neon --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d' {
        recordfail
        savedefault
        load_video
        gfxmode $linux_gfx_mode
        insmod gzio
        if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
        insmod part_gpt
        insmod ext2
        set root='hd0,gpt8'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8  7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d
        else
          search --no-floppy --fs-uuid --set=root 7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d
        fi
        linux   /boot/vmlinuz-5.11.0-38-generic root=UUID=7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d ro  quiet splash $vt_handoff
        initrd  /boot/initrd.img-5.11.0-38-generic
}
### END /etc/grub.d/10_linux_proxy ###

### BEGIN /etc/grub.d/30_os-prober_proxy ###








set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
menuentry "Kubuntu 21.10 [P9]" --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-aa9a050e-bf13-494c-8762-5f05012ddb85' {
        savedefault
        insmod part_gpt
        insmod ext2
        set root='hd0,gpt9'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9  aa9a050e-bf13-494c-8762-5f05012ddb85
        else
          search --no-floppy --fs-uuid --set=root aa9a050e-bf13-494c-8762-5f05012ddb85
        fi
        linux /boot/vmlinuz-5.13.0-20-generic root=UUID=aa9a050e-bf13-494c-8762-5f05012ddb85 ro quiet splash $vt_handoff
        initrd /boot/initrd.img-5.13.0-20-generic
}
### END /etc/grub.d/30_os-prober_proxy ###

### BEGIN /etc/grub.d/31_linux_zfs ###
### END /etc/grub.d/31_linux_zfs ###

### BEGIN /etc/grub.d/32_linux_xen ###

### END /etc/grub.d/32_linux_xen ###

### BEGIN /etc/grub.d/33_memtest86+ ###
### END /etc/grub.d/33_memtest86+ ###

### BEGIN /etc/grub.d/41_os-prober_proxy ###
menuentry "Kubuntu RESCUE [P12]" --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-8aaa234b-a9cc-426a-8eac-2fdb0ed4bd4b' {
        savedefault
        insmod part_gpt
        insmod ext2
        set root='hd0,gpt12'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt12 --hint-efi=hd0,gpt12 --hint-baremetal=ahci0,gpt12  8aaa234b-a9cc-426a-8eac-2fdb0ed4bd4b
        else
          search --no-floppy --fs-uuid --set=root 8aaa234b-a9cc-426a-8eac-2fdb0ed4bd4b
        fi
        linux /boot/vmlinuz-5.10.0-14-generic root=UUID=8aaa234b-a9cc-426a-8eac-2fdb0ed4bd4b ro quiet splash $vt_handoff
        initrd /boot/initrd.img-5.10.0-14-generic
}
menuentry "Windows BM [P2]" --class windows --class os $menuentry_id_option 'osprober-efi-F2B4-5224' {
        savedefault
        insmod part_gpt
        insmod fat
        set root='hd0,gpt2'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  F2B4-5224
        else
          search --no-floppy --fs-uuid --set=root F2B4-5224
        fi
        chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
### END /etc/grub.d/41_os-prober_proxy ###

### BEGIN /etc/grub.d/42_uefi-firmware ###
### END /etc/grub.d/42_uefi-firmware ###

### BEGIN /etc/grub.d/43_custom_proxy ###

# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.

### END /etc/grub.d/43_custom_proxy ###

### BEGIN /etc/grub.d/44_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/44_custom ###

Kubuntu user qui aimerait passer définitivement au bureau standard.

Hors ligne

#25 Le 28/10/2021, à 07:53

freex

Re : [résolu] Récupération de grub par KDE neon

Qid a écrit :
nany a écrit :

C’est d’ailleurs pour ça que j’ai demandé des compléments d’information (normalement visibles dans un rapport complet).

Je n'ai lu attentivement ton message de 01:53:45 qu'après avoir posté mon précédent... Là on est donc sur la même longueur d'onde wink

boot-info-4ppa130                                              [20211028_0849]

============================== Boot Info Summary ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos5)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /efi/Boot/bootx64.efi /efi/Boot/fbx64.efi 
                       /efi/Boot/mmx64.efi /efi/neon/grubx64.efi 
                       /efi/neon/mmx64.efi /efi/neon/shimx64.efi 
                       /efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi 
                       /efi/ubuntu/shimx64.efi /efi/neon/grub.cfg 
                       /efi/ubuntu/grub.cfg /efi/Microsoft/Boot/bootmgfw.efi 
                       /efi/Microsoft/Boot/bootmgr.efi 
                       /efi/Microsoft/Boot/memtest.efi

sda3: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 8 or 10
    Boot files:        /Windows/System32/winload.exe

sda5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda6: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 8 or 10
    Boot files:        /Windows/System32/winload.exe

sda7: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda8: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  KDE neon User - Plasma 25th Anniversary Edition
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub

sda9: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 21.10
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub

sda10: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Unknown
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda11: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda12: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu Hirsute Hippo (development branch)
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub

sdb1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD

sdb2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 8 or 10
    Boot files:        /bootmgr /Windows/System32/winload.exe

sdb3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sdb5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  According to the info in the boot sector, sdb5 starts 
                       at sector 2048.
    Operating System:  
    Boot files:        


================================ 6 OS detected =================================

OS#1:   L'OS actuellement utilisé - KDE neon User - Plasma 25th Anniversary Edition CurrentSession on sda8
OS#2:   Ubuntu Hirsute Hippo (development branch) on sda12
OS#3:   Ubuntu 21.10 on sda9
OS#4:   Windows 8 or 10 on sda4
OS#5:   Windows 8 or 10 on sda6
OS#6:   Windows 8 or 10 on sdb2

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.8.0-59-generic root=UUID=7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d ro quiet splash


===================================== UEFI =====================================

BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled.

efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,000F,000C,0012,0000
Boot0000  Windows Boot Manager	HD(2,GPT,76740ca4-4b7a-41ae-afa8-5c0e96c9d6c7,0xfa000,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* neon	HD(2,GPT,76740ca4-4b7a-41ae-afa8-5c0e96c9d6c7,0xfa000,0x32000)/File(\EFI\neon\shimx64.efi)
Boot000C* Hard Drive 	BBS(HD,,0x0)AMGOAMNO........o.S.T.1.0.0.0.L.M.0.2.4. .H.N.-.M.1.0.1.M.B.B....................A...........................>..Gd-.;.A..MQ..L.2.S.T.T.9.J.C.A.0.3.7.2.5.7. . . . . . ......AMBO
Boot000F* ubuntu	HD(2,GPT,76740ca4-4b7a-41ae-afa8-5c0e96c9d6c7,0xfa000,0x32000)/File(\EFI\ubuntu\shimx64.efi)
Boot0012* ubuntu	HD(2,GPT,76740ca4-4b7a-41ae-afa8-5c0e96c9d6c7,0xfa000,0x32000)/File(EFI\Ubuntu\grubx64.efi)

728124f6ec8e22fbdbe7034812c81b95   sda2/Boot/bootx64.efi
85fa9d77b929ec4231aba29476574eb6   sda2/Boot/fbx64.efi
469e608783843a701d172242f016c79c   sda2/Boot/mmx64.efi
fa1bf1a7f90a852abe0bdbd089b7f1b0   sda2/neon/grubx64.efi
469e608783843a701d172242f016c79c   sda2/neon/mmx64.efi
728124f6ec8e22fbdbe7034812c81b95   sda2/neon/shimx64.efi
eca92010a3d461e0f52639d330f3f43d   sda2/ubuntu/grubx64.efi
fdafb5eece6caeccb788c946a28e6872   sda2/ubuntu/mmx64.efi
728124f6ec8e22fbdbe7034812c81b95   sda2/ubuntu/shimx64.efi
3c7051eaea9d33eaba1b890ff7fd62c9   sda2/Microsoft/Boot/bootmgfw.efi
1f55c287e1da1ce90c54793690800edc   sda2/Microsoft/Boot/bootmgr.efi


============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda	: is-GPT,	no-BIOSboot,	has---ESP, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdb	: notGPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda8	: is-os,	64, apt-get,	signed grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ng,	update-grub,	farbios
sda1	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sda2	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sda4	: is-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sda5	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sda6	: is-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sda7	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sda9	: is-os,	64, apt-get,	signed grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sda10	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sda12	: is-os,	64, apt-get,	signed grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ng,	update-grub,	farbios
sdb1	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sdb2	: is-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sdb3	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sdb5	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios

Partitions info (2/3): _________________________________________________________

sda8	: isnotESP,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda1	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot
sda2	: is---ESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda4	: isnotESP,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda5	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot
sda6	: isnotESP,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda7	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot
sda9	: isnotESP,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda10	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda12	: isnotESP,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdb1	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	bootmgr,	is-winboot
sdb2	: isnotESP,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	notwinboot
sdb3	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdb5	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sda8	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	customized,	sda
sda1	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda2	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda4	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda5	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda6	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda7	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda9	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	customized,	sda
sda10	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda12	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	customized,	sda
sdb1	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdb
sdb2	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdb
sdb3	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdb
sdb5	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdb

fdisk -l (filtered): ___________________________________________________________

Disk sda: 223.58 GiB, 240057409536 bytes, 468862128 sectors
Disk identifier: 5D1878F5-1937-4AB8-9752-E4EFE5B23438
          Start       End   Sectors  Size Type
sda1       2048   1023999   1021952  499M Windows recovery environment
sda2    1024000   1228799    204800  100M EFI System
sda3    1228800   1261567     32768   16M Microsoft reserved
sda4    1261568 164680865 163419298 77.9G Microsoft basic data
sda5  164683776 165890047   1206272  589M Windows recovery environment
sda6  165890048 244552782  78662735 37.5G Microsoft basic data
sda7  244555776 245762047   1206272  589M Windows recovery environment
sda8  245762048 307986431  62224384 29.7G Linux filesystem
sda9  307986432 370642943  62656512 29.9G Microsoft basic data
sda10 442494976 452259839   9764864  4.7G Microsoft basic data
sda11 452259840 468860927  16601088  7.9G Linux swap
sda12 370642944 391294975  20652032  9.9G Linux filesystem
Partition table entries are not in disk order.
Disk sdb: 931.53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 0x00016da2
      Boot      Start        End    Sectors   Size Id Type
sdb1  *          2048    1026047    1024000   500M  7 HPFS/NTFS/exFAT
sdb2          1026048  200706047  199680000  95.2G  7 HPFS/NTFS/exFAT
sdb3        200706048 1511426047 1310720000   625G  7 HPFS/NTFS/exFAT
sdb4       1511426048 1953521663  442095616 210.8G  f W95 Ext'd (LBA)
sdb5       1511428096 1953521663  442093568 210.8G  7 HPFS/NTFS/exFAT

parted -lm (filtered): _________________________________________________________

sda:240GB:scsi:512:512:gpt:ATA KINGSTON SA400S3:;
1:1049kB:524MB:523MB:ntfs:Basic data partition:hidden, diag;
2:524MB:629MB:105MB:fat32:EFI system partition:boot, esp;
3:629MB:646MB:16.8MB::Microsoft reserved partition:msftres;
4:646MB:84.3GB:83.7GB:ntfs:Basic data partition:msftdata;
5:84.3GB:84.9GB:618MB:ntfs::hidden, diag;
6:84.9GB:125GB:40.3GB:ntfs:Basic data partition:msftdata;
7:125GB:126GB:618MB:ntfs::hidden, diag;
8:126GB:158GB:31.9GB:ext4::;
9:158GB:190GB:32.1GB:ext4:Basic data partition:msftdata;
12:190GB:200GB:10.6GB:ext4::;
10:227GB:232GB:5000MB:ntfs::msftdata;
11:232GB:240GB:8500MB:linux-swap(v1)::swap;
sdb:1000GB:scsi:512:4096:msdos:ATA ST1000LM024 HN-M:;
1:1049kB:525MB:524MB:ntfs::boot;
2:525MB:103GB:102GB:ntfs::;
3:103GB:774GB:671GB:ntfs::;
4:774GB:1000GB:226GB:::lba;
5:774GB:1000GB:226GB:ntfs::;

blkid (filtered): ______________________________________________________________

NAME    FSTYPE UUID                                 PARTUUID                             LABEL        PARTLABEL
sda                                                                                                   
├─sda1  ntfs   F8CCB3CACCB38204                     3c5c04e8-56b8-4ef6-b33d-b215430aeb18 Récupération Basic data partition
├─sda2  vfat   F2B4-5224                            76740ca4-4b7a-41ae-afa8-5c0e96c9d6c7              EFI system partition
├─sda3                                              3e966130-dd7c-49c2-8104-3e00a047a7a7              Microsoft reserved partition
├─sda4  ntfs   6E8AF8EA8AF8B027                     81b9718a-9177-4efb-b561-9318132a93ee Win.10.GPT1  Basic data partition
├─sda5  ntfs   342AA14B2AA10B46                     54725b9e-68b3-475a-abe8-4cf7324ed5c8              
├─sda6  ntfs   64D82434D82406C0                     063719e6-6417-4bad-b92d-87c59220c759 Win.10.GPT2  Basic data partition
├─sda7  ntfs   24D8713DD8710DF4                     fb34d85f-4463-4dc0-bff1-cb93ec23d9de              
├─sda8  ext4   7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d d127af3c-e7d9-40a3-813b-64dc0ff1819d              
├─sda9  ext4   aa9a050e-bf13-494c-8762-5f05012ddb85 64b6a977-d35d-400d-b241-5414fd5752d0 Kub.21.04.A9 Basic data partition
├─sda10 ntfs   535D7BE603D9AC2E                     18461363-42a6-494c-b37f-70bd7ec8e734 THUMBS       
├─sda11 swap   1886f2c9-76a2-444e-9b32-a1ef35e06afb 0add3ba1-f3a1-4847-91b8-d09f20a88141              
└─sda12 ext4   8aaa234b-a9cc-426a-8eac-2fdb0ed4bd4b f03fcb4a-6c20-43ab-806a-4ac0b2f1a112 Kub.rescue   
sdb                                                                                                   
├─sdb1  ntfs   C6EC7883EC787013                     00016da2-01                          EFI.sys      
├─sdb2  ntfs   54B8B5A1B8B58252                     00016da2-02                          Win.10.DOS   
├─sdb3  ntfs   FEFE8D31FE8CE2EF                     00016da2-03                          Ood          
├─sdb4                                              00016da2-04                                       
└─sdb5  ntfs   2ADCEB11DCEAD5DB                     00016da2-05                          OSv          

df (filtered): _________________________________________________________________

        Avail Use% Mounted on
sda10    3.9G  17% /media/data/Thumbs
sda12    3.7G  56% /mnt/boot-sav/sda12
sda1    56.2M  89% /mnt/boot-sav/sda1
sda4      39G  50% /mnt/boot-sav/sda4
sda5    88.5M  85% /mnt/boot-sav/sda5
sda6    15.4G  59% /mnt/boot-sav/sda6
sda7    88.4M  85% /mnt/boot-sav/sda7
sda8    17.5G  35% /
sda9     8.6G  66% /mnt/boot-sav/sda9
sdb1   142.9M  71% /mnt/boot-sav/sdb1
sdb2    58.1G  39% /mnt/boot-sav/sdb2
sdb3   193.6G  69% /media/data/Ood
sdb5    54.8G  74% /media/data/OSv

Mount options: __________________________________________________________________

sda10  rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096
sda12  rw,relatime
sda1   rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda4   rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda5   rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda6   rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda7   rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda8   rw,noatime,discard
sda9   rw,relatime
sdb1   rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sdb2   rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sdb3   rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096
sdb5   rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096

====================== sda2/efi/neon/grub.cfg (filtered) =======================

search.fs_uuid 7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d root hd0,gpt8 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg

===================== sda2/efi/ubuntu/grub.cfg (filtered) ======================

search.fs_uuid aa9a050e-bf13-494c-8762-5f05012ddb85 root hd0,gpt9 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg

====================== sda8/boot/grub/grub.cfg (filtered) ======================

Neon 20.04 [P8]   7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d
Kubuntu 21.10 [P9]   aa9a050e-bf13-494c-8762-5f05012ddb85
### END /etc/grub.d/30_os-prober_proxy ###
Kubuntu RESCUE [P12]   8aaa234b-a9cc-426a-8eac-2fdb0ed4bd4b
Windows BM [P2]   osprober-efi-F2B4-5224

========================== sda8/etc/fstab (filtered) ===========================

# <file system>             <mount point>  <type>  <options>  <dump>  <pass>
UUID=F2B4-5224                            /boot/efi      vfat    defaults,noatime 0 2
UUID=7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d /              ext4    defaults,noatime,discard 0 1
tmpfs                                     /tmp           tmpfs   defaults,noatime,mode=1777 0 0
UUID=54B8B5A1B8B58252							/media/data/Win.10.DOS	ntfs	ro,locale=fr_BE.UTF-8,uid=1000,noauto	0	0
UUID=6E8AF8EA8AF8B027							/media/data/Win.10.GPT1	ntfs	ro,locale=fr_BE.UTF-8,uid=1000,noauto	0	0
UUID=64D82434D82406C0							/media/data/Win.10.GPT2	ntfs	ro,locale=fr_BE.UTF-8,uid=1000,noauto	0	0
UUID=FEFE8D31FE8CE2EF							/media/data/Ood			ntfs	rw,locale=fr_BE.UTF-8,uid=1000,auto		0	0
UUID=2ADCEB11DCEAD5DB							/media/data/OSv			ntfs	rw,locale=fr_BE.UTF-8,uid=1000,auto		0	0
UUID=535D7BE603D9AC2E							/media/data/Thumbs		ntfs	rw,locale=fr_BE.UTF-8,uid=1000,auto		0	0

======================= sda8/etc/default/grub (filtered) =======================

GRUB_DEFAULT="saved"
GRUB_TIMEOUT_STYLE="hidden"
GRUB_TIMEOUT="4"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_SAVEDEFAULT="true"
==================== sda8: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 125.894165039 = 135.177830400  boot/grub/grub.cfg                             2
 130.354167938 = 139.966722048  boot/vmlinuz                                   1
 130.354167938 = 139.966722048  boot/vmlinuz-5.11.0-38-generic                 1
 124.478851318 = 133.658148864  boot/vmlinuz-5.8.0-59-generic                  1
 124.478851318 = 133.658148864  boot/vmlinuz.old                               1
 136.962894440 = 147.062788096  boot/initrd.img                                3
 136.962894440 = 147.062788096  boot/initrd.img-5.11.0-38-generic              3
 131.727367401 = 141.441183744  boot/initrd.img-5.8.0-59-generic               2
 131.727367401 = 141.441183744  boot/initrd.img.old                            2

===================== sda8: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18151 aoû 12 11:18 10_linux.dpkg-dist
-rwxr-xr-x 1 root root  1825 oct 20 18:18 10_linux_proxy
-rwxr-xr-x 1 root root  1019 oct 20 18:18 30_os-prober_proxy
-rwxr-xr-x 1 root root 42359 fév 12  2021 31_linux_zfs
-rwxr-xr-x 1 root root 12894 fév 12  2021 32_linux_xen
-rwxr-xr-x 1 root root  1992 aoû 18  2020 33_memtest86+
-rwxr-xr-x 1 root root  1285 oct 20 18:18 41_os-prober_proxy
-rwxr-xr-x 1 root root  1424 fév 12  2021 42_uefi-firmware
-rwxr-xr-x 1 root root   244 oct 20 18:18 43_custom_proxy
-rwxr-xr-x 1 root root   216 fév 12  2021 44_custom
drwxr-xr-x 4 root root  4096 avr 23  2021 backup
drwxr-xr-x 2 root root  4096 avr 23  2021 bin
drwxr-xr-x 2 root root  4096 oct 20 18:18 proxifiedScripts

========================= sda8/etc/grub.d/31_linux_zfs =========================

#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2019 Canonical Ltd.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
datarootdir="/usr/share"
ubuntu_recovery="1"
quiet_boot="1"
quick_boot="1"
gfxpayload_dynamic="1"
vt_handoff="1"
. "${pkgdatadir}/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
set -u
## Skip early if zfs utils isn't installed (instead of failing on first zpool list)
if ! `which zfs >/dev/null 2>&1`; then
    exit 0
fi
imported_pools=""
MNTDIR="$(mktemp -d ${TMPDIR:-/tmp}/zfsmnt.XXXXXX)"
ZFSTMP="$(mktemp -d ${TMPDIR:-/tmp}/zfstmp.XXXXXX)"
machine="$(uname -m)"
case "${machine}" in
    i?86) GENKERNEL_ARCH="x86" ;;
    mips|mips64) GENKERNEL_ARCH="mips" ;;
    mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
    arm*) GENKERNEL_ARCH="arm" ;;
    *) GENKERNEL_ARCH="${machine}" ;;
esac
RC=0
on_exit() {
    # Restore initial zpool import state
    for pool in ${imported_pools}; do
        zpool export "${pool}"
    done
    mountpoint -q "${MNTDIR}"  && umount "${MNTDIR}" || true
    rmdir "${MNTDIR}"
    rm -rf "${ZFSTMP}"
    exit "${RC}"
}
trap on_exit EXIT INT QUIT ABRT PIPE TERM
# List ONLINE and DEGRADED pools
import_pools() {
    # We have to ignore zpool import output, as potentially multiple / will be available,
    # and we need to autodetect all zpools this way with their real mountpoints.
    local initial_pools="$(zpool list | awk '{if (NR>1) print $1}')"
    local all_pools=""
    local imported_pools=""
    local err=""
    set +e
    err="$(zpool import -f -a -o cachefile=none -o readonly=on -N 2>&1)"
    # Only print stderr if the command returned an error
    # (it can echo "No zpool to import" with success, which we don't want)
    if [ $? -ne 0 ]; then
        echo "Some pools couldn't be imported and will be ignored:\n${err}" >&2
    fi
    set -e
    all_pools="$(zpool list | awk '{if (NR>1) print $1}')"
    for pool in ${all_pools}; do
        if echo "${initial_pools}" | grep -wq "${pool}"; then
            continue
        fi
        imported_pools="${imported_pools} ${pool}"
    done
    echo "${imported_pools}"
}
# List all the dataset with a root mountpoint
get_root_datasets() {
    local pools="$(zpool list | awk '{if (NR>1) print $1}')"
    for p in ${pools}; do
        local rel_pool_root=$(zpool get -H altroot ${p} | awk '{print $3}')
        if [ "${rel_pool_root}" = "-" ]; then
            rel_pool_root="/"
        fi
        zfs list -H -o name,canmount,mountpoint -t filesystem | grep -E '^'"${p}"'(\s|/[[:print:]]*\s)(on|noauto)\s'"${rel_pool_root}"'$' | awk '{print $1}'
    done
}
# find if given datasets can be mounted for directory and return its path (snapshot or real path)
# $1 is our current dataset name
# $2 directory path we look for (cannot contains /)
# $3 is the temporary mount directory to use
# $4 is the optional snapshot name
# return path for directory (which can be a mountpoint)
validate_system_dataset() {
    local dataset="$1"
    local directory="$2"
    local mntdir="$3"
    local snapshot_name="$4"
    local mount_path="${mntdir}/${directory}"
    if ! zfs list "${dataset}" >/dev/null 2>&1; then
        return
    fi
    if ! mount -o noatime,zfsutil -t zfs "${dataset}" "${mount_path}"; then
        grub_warn "Failed to find a valid directory '${directory}' for dataset '${dataset}@${snapshot_name}'. Ignoring"
        return
    fi
    local candidate_path="${mount_path}"
    if [ -n "${snapshot_name}" ]; then
        # WORKAROUND a bug https://github.com/zfsonlinux/zfs/issues/9958
        # Reading the content of a snapshot fails if it is not the first mount
        # for a given dataset
        first_mntdir=$(awk '{if ($1 == "'${dataset}'") {print $2; exit;}}' /proc/mounts)
        if [ "${first_mntdir}" = "/" ]; then
            # prevents // on candidate_path
            first_mntdir=""
        fi
        candidate_path="${first_mntdir}/.zfs/snapshot/${snapshot_name}"
    fi
    if [ -n "$(ls ${candidate_path} 2>/dev/null)" ]; then
        echo "${candidate_path}"
        return
    else
        mountpoint -q "${mount_path}" && umount "${mount_path}" || true
    fi
}
# Detect system directory relevant to the other, trying to find the ones associated on the current dataset or snapshot/
# System directory should be at most a direct child dataset of main datasets (no recursivity)
# We can fallback trying other zfs pools if no match has been found.
# $1 is our current dataset name (which can have @snapshot name)
# $2 directory path we look for (cannot contains /)
# $3 restrict_to_same_pool (true|false) force looking for dataset with the same basename in the current dataset pool only
# $4 is the temporary mount directory to use
# $5 is the optional etc directory (if not $2 is not etc itself)
# return path for directory (which can be a mountpoint)
get_system_directory() {
    local dataset_path="$1"
    local directory="$2"
    local restrict_to_same_pool="$3"
    local mntdir="$4"
    local etc_dir="$5"
    if [ -z "${etc_dir}" ]; then
        etc_dir="${mntdir}/etc"
    fi
    local candidate_path="${mntdir}/${directory}"
    # 1. Look for /etc/fstab first (which will mount even on top of non empty $directory)
    local mounted_fstab_entry="false"
    if [ -f "${etc_dir}/fstab" ]; then
        mount_args=$(awk '/^[^#].*[ \t]\/'"${directory}"'[ \t]/ {print "-t", $3, $1}' "${etc_dir}/fstab")
        if [ -n "${mount_args}" ]; then
            mounted_fstab_entry="true"
            mount -o noatime ${mount_args} "${candidate_path}" || mounted_fstab_entry="false"
        fi
    fi
    # If directory isn't empty. Only count if coming from /etc/fstab. Will be
    # handled below otherwise as we are interested in potential snapshots.
    if [ "${mounted_fstab_entry}" = "true" -a -n "$(ls ${candidate_path} 2>/dev/null)" ]; then
        echo "${candidate_path}"
        return
    fi
    # 2. Handle zfs case, which can be a snapshots.
    local base_dataset_path="${dataset_path}"
    local snapshot_name=""
    # For snapshots we extract the parent dataset
    if echo "${dataset_path}" | grep -q '@'; then
        base_dataset_path=$(echo "${dataset_path}" | cut -d '@' -f1)
        snapshot_name=$(echo "${dataset_path}" | cut -d '@' -f2)
    fi
    base_dataset_name="${base_dataset_path##*/}"
    base_pool="$(echo "${base_dataset_path}" | cut -d'/' -f1)"
    # 2.a) Look for child dataset included in base dataset, which needs to hold same snapshot if any
    candidate_path=$(validate_system_dataset "${base_dataset_path}/${directory}" "${directory}" "${mntdir}" "${snapshot_name}")
    if [ -n "${candidate_path}" ]; then
        echo "${candidate_path}"
        return
    fi
    # 2.b) Look for current dataset (which is already mounted as /)
    candidate_path="${mntdir}/${directory}"
    if [ -n "${snapshot_name}" ]; then
        # WORKAROUND a bug https://github.com/zfsonlinux/zfs/issues/9958
        # Reading the content of a snapshot fails if it is not the first mount
        # for a given dataset
        first_mntdir=$(awk '{if ($1 == "'${base_dataset_path}'") {print $2; exit;}}' /proc/mounts)
        if [ "${first_mntdir}" = "/" ]; then
            # prevents // on candidate_path
            first_mntdir=""
        fi
        candidate_path="${first_mntdir}/.zfs/snapshot/${snapshot_name}/${directory}"
    fi
    if [ -n "$(ls ${candidate_path} 2>/dev/null)" ]; then
        echo "${candidate_path}"
        return
    fi
    # 2.c) Look for every datasets in every pool which isn't the current dataset which holds:
    # - the same dataset name (last section) than our base_dataset_name
    # - mountpoint=directory
    # - canmount!=off
    all_same_base_dataset_name="$(zfs list -H -t filesystem -o name,canmount | awk '/^[^ ]+\/'"${base_dataset_name}"'[ \t](on|noauto)/ {print $1}') "
    # order by local pool datasets first
    current_pool_same_base_datasets=""
    other_pools_same_base_datasets=""
    root_pool=$(echo "${dataset_path%%/*}")
    for d in ${all_same_base_dataset_name}; do
        cur_dataset_pool=$(echo "${d%%/*}")
        if echo "${cur_dataset_pool}" | grep -wq "${root_pool}" 2>/dev/null ; then
            current_pool_same_base_datasets="${current_pool_same_base_datasets} ${d}"
        else
            other_pools_same_base_datasets="${other_pools_same_base_datasets} ${d}"
        fi
    done
    ordered_same_base_datasets="${current_pool_same_base_datasets} ${other_pools_same_base_datasets}"
    if [ "${restrict_to_same_pool}" = "true" ]; then
        ordered_same_base_datasets="${current_pool_same_base_datasets}"
    fi
    # now, loop over them
    for d in ${ordered_same_base_datasets}; do
        cur_dataset_pool=$(echo "${d%%/*}")
        rel_pool_root=$(zpool get -H altroot ${cur_dataset_pool} | awk '{print $3}')
        if [ "${rel_pool_root}" = "-" ]; then
            rel_pool_root=""
        fi
        # check mountpoint match
        candidate_dataset=$(zfs get -H mountpoint ${d} | grep -E "mountpoint\s${rel_pool_root}/${directory}\s" | awk '{print $1}')
        if [ -z "${candidate_dataset}" ]; then
            continue
        fi
        candidate_path=$(validate_system_dataset "${candidate_dataset}" "${directory}" "${mntdir}" "${snapshot_name}")
        if [ -n "${candidate_path}" ]; then
            echo "${candidate_path}"
            return
        fi
    done
    # 2.d) If we didn't find anything yet: check for persistent datasets corresponding to our mountpoint, with canmount=on without any snapshot associated:
    # Note: we go over previous datasets as well, but this is ok, as we didn't include them before.
    all_mountable_datasets="$(zfs list -t filesystem -o name,canmount | awk  '/^[^ ]+[ \t]+on/ {print $1}')"
    # order by local pool datasets first
    current_pool_datasets=""
    other_pools_datasets=""
    root_pool=$(echo "${dataset_path%%/*}")
    for d in ${all_mountable_datasets}; do
        cur_dataset_pool=$(echo "${d%%/*}")
        if echo "${cur_dataset_pool}" | grep -wq "${root_pool}" 2>/dev/null ; then
            current_pool_datasets="${current_pool_datasets} ${d}"
        else
            other_pools_datasets="${other_pools_datasets} ${d}"
        fi
    done
    ordered_datasets="${current_pool_datasets} ${other_pools_datasets}"
    if [ "${restrict_to_same_pool}" = "true" ]; then
        ordered_datasets="${current_pool_datasets}"
    fi
    for d in ${ordered_datasets}; do
        cur_dataset_pool=$(echo "${d%%/*}")
        rel_pool_root=$(zpool get -H altroot ${cur_dataset_pool} | awk '{print $3}')
        if [ "${rel_pool_root}" = "-" ]; then
            rel_pool_root=""
        fi
        # check mountpoint match
        candidate_dataset=$(zfs get -H mountpoint ${d} | grep -E "mountpoint\s${rel_pool_root}/${directory}\s" | awk '{print $1}')
        if [ -z "${candidate_dataset}" ]; then
            continue
        fi
        candidate_path=$(validate_system_dataset "${d}" "${directory}" "${mntdir}" "")
        if [ -n "${candidate_path}" ]; then
            echo "${candidate_path}"
            return
        fi
    done
    grub_warn "Failed to find a valid directory '${directory}' for dataset '${dataset_path}'. Ignoring"
    return
}
# Try our default layout bpool as a prefered layout (fast path)
# This is get_system_directory for boot optimized for our default installation layout
# $1 is our current dataset name (which can have @snapshot name)
# $2 is the temporary mount directory to use
# return path for directory (which can be a mountpoint) if found
try_default_layout_bpool() {
    local root_dataset_path="$1"
    local mntdir="$2"
    dataset_basename="${root_dataset_path##*/}"
    candidate_dataset="bpool/BOOT/${dataset_basename}"
    dataset_properties="$(zfs get -H mountpoint,canmount ${candidate_dataset} | cut -f3 | paste -sd ' ')"
    if [ -z "${dataset_properties}" ]; then
        return
    fi
    rel_pool_root=$(zpool get -H altroot bpool | awk '{print $3}')
    if [ "${rel_pool_root}" = "-" ]; then
        rel_pool_root=""
    fi
    snapshot_name="${dataset_basename##*@}"
    [ "${snapshot_name}" = "${dataset_basename}" ] && snapshot_name=""
    if [ -z "${snapshot_name}" ]; then
        if ! echo "${dataset_properties}" | grep -Eq "${rel_pool_root}/boot (on|noauto)"; then
            return
        fi
    else
        candidate_dataset=$(echo "${candidate_dataset}" | cut -d '@' -f1)
    fi
    validate_system_dataset "${candidate_dataset}" "boot" "${mntdir}" "${snapshot_name}"
}
# Return if secure boot is enabled on that system
is_secure_boot_enabled() {
    if LANG=C mokutil --sb-state 2>/dev/null | grep -qi enabled; then
        echo "true"
        return
    fi
    echo "false"
    return
}
# Given a filesystem or snapshot dataset, returns dataset|machine id|pretty name|last used
# $1 is dataset we want information from
# $2 is the temporary mount directory to use
get_dataset_info() {
    local dataset="$1"
    local mntdir="$2"
    local base_dataset="${dataset}"
    local etc_dir="${mntdir}/etc"
    local is_snapshot="false"
    # For snapshot we extract the parent dataset
    if echo "${dataset}" | grep -q '@'; then
        base_dataset=$(echo "${dataset}" | cut -d '@' -f1)
        is_snapshot="true"
    fi
    mount -o noatime,zfsutil -t zfs "${base_dataset}" "${mntdir}"
    # read machine-id/os-release from /etc
    etc_dir=$(get_system_directory "${dataset}" "etc" "true" "${mntdir}" "")
    if [ -z  "${etc_dir}" ]; then
        grub_warn "Ignoring ${dataset}"
        mountpoint -q "${mntdir}/etc" && umount "${mntdir}/etc" || true
        umount "${mntdir}"
        return
    fi
    machine_id=""
    if [ -f "${etc_dir}/machine-id" ]; then
        machine_id=$(cat "${etc_dir}/machine-id")
    fi
    # We have to use a random temporary id if we don't have any machine-id file or if this one is empty
    # (mostly the case of new installations before first boot).
    # Let's use the dataset name directly for this.
    # Consequence is that all datasets are then separated.
    if [ -z "${machine_id}" ]; then
        machine_id="${dataset}"
    fi
    pretty_name=$(. "${etc_dir}/os-release" && echo "${PRETTY_NAME}")
    mountpoint -q "${mntdir}/etc" && umount "${mntdir}/etc" || true
    # read available kernels from /boot
    boot_dir="$(try_default_layout_bpool "${dataset}" "${mntdir}")"
    if [ -z "${boot_dir}" ]; then
        boot_dir=$(get_system_directory "${dataset}" "boot" "false" "${mntdir}" "${etc_dir}")
    fi
    if [ -z  "${boot_dir}" ]; then
        grub_warn "Ignoring ${dataset}"
        mountpoint -q "${mntdir}/boot" && umount "${mntdir}/boot" || true
        umount "${mntdir}"
        return
    fi
    initrd_list=""
    kernel_list=""
    list=$(find "${boot_dir}" -maxdepth 1 -type f -regex '.*/\(vmlinuz\|vmlinux\|kernel\)-.*')
    while [ "x$list" != "x" ] ; do
        linux=`version_find_latest $list`
        list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
        if ! grub_file_is_not_garbage "${linux}" ; then
            continue
        fi
        # Filters entry if efi/non efi.
        # Note that for now we allow kernel without .efi.signed as those are signed kernel
        # on ubuntu, loaded by the shim.
        case "${linux}" in
            *.efi.signed)
                if [ "$(is_secure_boot_enabled)" = "false" ]; then
                    continue
                fi
            ;;
        esac
        linux_basename=$(basename "${linux}")
        linux_dirname=$(dirname "${linux}")
        version=$(echo "${linux_basename}" | sed -e "s,^[^0-9]*-,,g")
        alt_version=$(echo "${version}" | sed -e "s,\.old$,,g")
        gettext_printf "Found linux image: %s in %s\n" "${linux_basename}" "${dataset}" >&2
        initrd=""
        for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
            "initrd-${version}" "initramfs-${version}.img" \
            "initrd.img-${alt_version}" "initrd-${alt_version}.img" \
            "initrd-${alt_version}" "initramfs-${alt_version}.img" \
            "initramfs-genkernel-${version}" \
            "initramfs-genkernel-${alt_version}" \
            "initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
            "initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}"; do
            if test -e "${linux_dirname}/${i}" ; then
                initrd="$i"
                break
            fi
        done
        if test -z "${initrd}" ; then
            grub_warn "Couldn't find any valid initrd for dataset ${dataset}."
            continue
        fi
        gettext_printf "Found initrd image: %s in %s\n" "${initrd}" "${dataset}" >&2
        rel_linux_dirname=$(make_system_path_relative_to_its_root "${linux_dirname}")
        initrd_list="${initrd_list}|${rel_linux_dirname}/${initrd}"
        kernel_list="${kernel_list}|${rel_linux_dirname}/${linux_basename}"
    done
    initrd_list="${initrd_list#|}"
    kernel_list="${kernel_list#|}"
    initrd_device=$(${grub_probe} --target=device "${boot_dir}" | head -1)
    mountpoint -q "${mntdir}/boot" && umount "${mntdir}/boot" || true
    # We needed to look in / for snapshots on root dataset, umount there before zfs lazily unmount it
    case "${boot_dir}" in /boot/.zfs/snapshot/*)
        umount "${boot_dir}" || true
        ;;
    esac
    # for zsys snapshots: we want to know which kernel we successful last booted with
    last_booted_kernel=$(zfs get -H com.ubuntu.zsys:last-booted-kernel "${dataset}" | awk '{print $3}')
    # snapshot: last_used is dataset creation time
    if [ "${is_snapshot}" = "true" ]; then
        last_used="$(zfs get -pH creation "${dataset}" | awk -F '\t' '{print $3}')"
    # otherwise, last_used is manually marked at boot/shutdown on a root dataset for zsys
    else
        # if current system, take current time
        if zfs mount | awk '/[ \t]+\/$/ {print $1}' | grep -q ${dataset}; then
            last_used=$(date +%s)
        else
            last_used=$(zfs get -H com.ubuntu.zsys:last-used "${dataset}" | awk '{print $3}')
            # case of non zsys, or zsys without annotation, take /etc/machine-id stat (as we mounted with noatime).
            # However, as systems can be relatime, if system is current mounted one, set current time (case of clone + reboot
            # within the same d).
            if [ "${last_used}" = "-" ]; then
                last_used=$(stat --printf="%X" "${mntdir}/etc/os-release")
                if [ -f "${mntdir}/etc/machine-id" ]; then
                    last_used=$(stat --printf="%X" "${mntdir}/etc/machine-id")
                fi
            fi
        fi
    fi
    is_zsys=$(zfs get -H com.ubuntu.zsys:bootfs "${base_dataset}" | awk '{print $3}')
    if [ -n "${initrd_list}" -a -n "${kernel_list}" ]; then
        echo "${dataset}\t${is_zsys}\t${machine_id}\t${pretty_name}\t${last_used}\t${initrd_device}\t${initrd_list}\t${kernel_list}\t${last_booted_kernel}"
    else
        grub_warn "didn't find any valid initrd or kernel."
    fi
    umount "${mntdir}" || true
    # We needed to look in / for snapshots on root dataset, umount the snapshot for etc before zfs lazily unmount it
    case "${etc_dir}" in /.zfs/snapshot/*/etc)
        snapshot_path="$(findmnt -n -o TARGET -T ${etc_dir})"
        umount "${snapshot_path}" || true
        ;;
    esac
}
# Scan available boot options and returns in a formatted list
# $1 is the temporary mount directory to use
bootlist() {
    local mntdir="$1"
    local boot_list=""
    for dataset in $(get_root_datasets); do
        # get information from current root dataset
        boot_list="${boot_list}$(get_dataset_info ${dataset} ${mntdir})\n"
        # get information from snapshots of this root dataset
        for snapshot_dataset in $(zfs list -H -o name -t snapshot "${dataset}"); do
            boot_list="${boot_list}$(get_dataset_info ${snapshot_dataset} ${mntdir})\n"
        done
    done
    echo "${boot_list}"
}
# Order machine ids by last_used from their main entry
get_machines_sorted() {
    local bootlist="$1"
    local machineids="$(echo "${bootlist}" | awk '{print $3}' | sort -u)"
    for machineid in ${machineids}; do
        echo "${bootlist}" | awk 'BEGIN{FS="\t"} $1 !~ /.*@.*/  {print $5, $3}' | sort -nr | grep -E "[^^]\b${machineid}\b" | head -1
    done | sort -nr | awk '{print $2}'
}
# Sort entries by last_used for a given machineid
sort_entries_for_machineid() {
    local bootlist="$1"
    local machineid="$2"
    tab="$(printf '\t')"
    echo "${bootlist}" | grep -E "[^^]\b${machineid}\b" | sort -k5,5r -k1,1 -t "${tab}"
}
# Return main entry index
get_main_entry() {
    local entries="$1"
    echo "${entries}" | awk 'BEGIN{FS="\t"} $1 !~ /.*@.*/  {print}' | head -1
}
# Return specific field at index from entry
get_field_from_entry() {
    local entry="$1"
    local index="$2"
    echo "${entry}" | awk "BEGIN{FS=\"\t\"} {print \$$index}"
}
# Get the main entry metadata
main_entry_meta() {
    local main_entry="$1"
    initrd=$(get_field_from_entry "${main_entry}" 7 | cut -d'|' -f1)
    kernel=$(get_field_from_entry "${main_entry}" 8 | cut -d'|' -f1)
    # Take first element (most recent entry) which is not a snapshot
    echo "${main_entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"main\", \$4, \$1, \$6, \"$initrd\", \"$kernel\"}"
}
# Get advanced entries metadata
advanced_entries_meta() {
    local main_entry="$1"
    last_used_kernel="$(get_field_from_entry "${main_entry}" 9 )"
    # We must align initrds with kernels.
    # Adds initrds to the stack then pop them 1 by 1 as we process the kernels
    set -- $(get_field_from_entry "${main_entry}" 7 | tr "|" " ")
    for kernel in $(get_field_from_entry "${main_entry}" 8 | tr "|" " "); do
        # get initrd and pop to the next one
        initrd="$1"; shift
        was_last_used_kernel="false"
        kernel_basename=$(basename "${kernel}")
        if [ "${kernel_basename}" = "${last_used_kernel}" ]; then
            was_last_used_kernel="true"
        fi
        echo "${main_entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"}    {print \$3, \$2, \"advanced\", \$4, \$1, \$6, \"$initrd\", \"$kernel\", \"$was_last_used_kernel\"}"
    done
}
# Get history metadata
history_entries_meta() {
    local entries="$1"
    local main_dataset_name="$2"
    local main_dataset_releasename="$3"
    if [ -z "${entries}" ]; then
        return
    fi
    # Traverse snapshots and clones
    echo "${entries}" | while read entry; do
        name=""
        # Compute snapshot/filesystem dataset name
        snap_dataset_name="$(get_field_from_entry "${entry}" 1)"
        snapname="${snap_dataset_name##*@}"
        # If, this is a clone, take what is after main_dataset_name
        if [ "${snapname}" = "${snap_dataset_name}" ]; then
            snapname="${snap_dataset_name##${main_dataset_name}_}"
            # Handle manual user clone (not prefixed by "main_dataset_name")
            snapname="${snapname##*/}"
        fi
        # We keep the snapname only if it is not only a zsys auto snapshot
        if echo "${snapname}" | grep -q "^autozsys_"; then
            snapname=""
        fi
        # We store the release only if it different from main dataset release (snapshot before a release upgrade)
        releasename=$(get_field_from_entry "${entry}" 4)
        if [ "${releasename}" = "${main_dataset_releasename}" ]; then
            releasename=""
        fi
        # Snapshot date
        foo="$(get_field_from_entry "${entry}" 5)"
        snapdate="$(date -d @$(get_field_from_entry "${entry}" 5) "+%x @ %H:%M")"
        # For snapshots/clones the name can have the following formats:
        # 	<DATE>: autozsys, same release
        #   <OLD_RELEASE> on <DATE>: autozsys, different release
        #   <SNAPNAME> on <DATE>: Manual snapshot, same release
        #   <SNAPNAME>, <OLD_RELEASE> on <DATE>: Manual snapshot, different release
        if [ "${snapname}" = "" -a "${releasename}" = "" ]; then
            name="${snapdate}"
        elif [ "${snapname}" = "" -a "${releasename}" != "" ]; then
            name=$(gettext_printf "%s on %s" "${releasename}" "${snapdate}")
        elif [ "${snapname}" != "" -a "${releasename}" = "" ]; then
            name=$(gettext_printf "%s on %s" "${snapname}" "${snapdate}")
        else # snapname != "" && releasename != ""
            name=$(gettext_printf "%s, %s on %s" "${snapname}" "${releasename}" "${snapdate}")
        fi
        # Choose kernel and initrd if the snapshot was booted successfully on a specific kernel before
        # Take latest by default if no match
        initrd=$(get_field_from_entry "${entry}" 7 | cut -d'|' -f1)
        kernel=$(get_field_from_entry "${entry}" 8 | cut -d'|' -f1)
        last_used_kernel="$(get_field_from_entry "${entry}" 9)"
        # We must align initrds with kernels.
        # Adds initrds to the stack then pop them 1 by 1 as we process the kernels
        set -- $(get_field_from_entry "${entry}" 7 | tr "|" " ")
        for k in $(get_field_from_entry "${entry}" 8|tr "|" " "); do
            # get initrd and pop to the next one
            candidate_initrd="$1"; shift
            kernel_basename=$(basename "${k}")
            if [ "${kernel_basename}" = "${last_used_kernel}" ]; then
                kernel="${k}"
                initrd="${candidate_initrd}"
                break
            fi
        done
        echo "${entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"}    {print \$3, \$2, \"history\", \"$name\", \$1, \$6, \"$initrd\", \"$kernel\"}"
    done
}
# Generate metadata from a BOOTLIST that will subsequently used to generate
# the final grub menu entries
generate_grub_menu_metadata() {
    local bootlist="$1"
    # Sort machineids by last_used from their main entry
    for machineid in $(get_machines_sorted "${bootlist}"); do
        entries="$(sort_entries_for_machineid "${bootlist}" ${machineid})"
        main_entry="$(get_main_entry "${entries}")"
        if [ -z "$main_entry" ]; then
            continue
        fi
        main_entry_meta "${main_entry}"
        advanced_entries_meta "${main_entry}"
        main_dataset_name="$(get_field_from_entry "${main_entry}" 1)"
        main_dataset_releasename="$(get_field_from_entry "${main_entry}" 4)"
        # grep -v errcode != 0 if there is no match. || true to not fail with -e
        other_entries="$(echo "${entries}" | grep -v "${main_entry}" || true)"
        history_entries_meta "${other_entries}" "${main_dataset_name}" "${main_dataset_releasename}"
    done
}
# Print the configuration part common to all sections
# Note:
#   If 10_linux runs these part will be defined twice in grub configuration
print_menu_prologue() {
    cat << 'EOF'
function gfxmode {
	set gfxpayload="${1}"
EOF
    if [ "${vt_handoff}" = 1 ]; then
        cat << 'EOF'
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
EOF
    fi
    cat << EOF
}
EOF
    # Use ELILO's generic "efifb" when it's known to be available.
    # FIXME: We need an interface to select vesafb in case efifb can't be used.
    GRUB_GFXPAYLOAD_LINUX="${GRUB_GFXPAYLOAD_LINUX:-}"
    if [ "${GRUB_GFXPAYLOAD_LINUX}" != "" ] || [ "${gfxpayload_dynamic}" = 0 ]; then
        echo "set linux_gfx_mode=${GRUB_GFXPAYLOAD_LINUX}"
    else
        cat << EOF
if [ "\${recordfail}" != 1 ]; then
  if [ -e \${prefix}/gfxblacklist.txt ]; then
    if hwmatch \${prefix}/gfxblacklist.txt 3; then
      if [ \${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
EOF
    fi
    cat << EOF
export linux_gfx_mode
EOF
}
# Cache for prepare_grub_to_access_device call
# $1: boot_device
# $2: submenu_level
prepare_grub_to_access_device_cached() {
    local boot_device="$1"
    local submenu_level="$2"
    local boot_device_idx="$(echo ${boot_device} | tr '/' '_')"
    cache_file="${ZFSTMP}/$(echo boot_device${boot_device_idx})"
    if [ ! -f "${cache_file}" ]; then
        set +u
        echo "$(prepare_grub_to_access_device "${boot_device}")" > "${cache_file}"
        set -u
        for i in 0 1 2; do
            submenu_indentation="$(printf %${i}s | tr " " "${grub_tab}")"
            sed "s/^/${submenu_indentation}	/" "${cache_file}" > "${cache_file}--${i}"
        done
    fi
    cat "${cache_file}--${submenu_level}"
}
# Print a grub menu entry
zfs_linux_entry () {
    submenu_level="$1"
    title="$2"
    type="$3"
    dataset="$4"
    boot_device="$5"
    initrd="$6"
    kernel="$7"
    kernel_version="$8"
    kernel_additional_args="${9:-}"
    boot_devices="${10:-}"
    submenu_indentation="$(printf %${submenu_level}s | tr " " "${grub_tab}")"
    echo "${submenu_indentation}menuentry '$(echo "${title}" | grub_quote)' ${CLASS} \${menuentry_id_option} 'gnulinux-${dataset}-${kernel_version}' {"
    if [ "${quick_boot}" = 1 ]; then
        echo "${submenu_indentation}	recordfail"
    fi
    if [ "${type}" != "recovery" ] ; then
        GRUB_SAVEDEFAULT=${GRUB_SAVEDEFAULT:-}
        default_entry="$(save_default_entry)"
        if [ -n "${default_entry}" ]; then
            echo "${submenu_indentation}	${default_entry}"
        fi
    fi
    # Use ELILO's generic "efifb" when it's known to be available.
    # FIXME: We need an interface to select vesafb in case efifb can't be used.
    if [ "${GRUB_GFXPAYLOAD_LINUX}" = "" ]; then
        echo "${submenu_indentation}	load_video"
    else
        if [ "${GRUB_GFXPAYLOAD_LINUX}" != "text" ]; then
            echo "${submenu_indentation}	load_video"
        fi
    fi
    if ([ "${ubuntu_recovery}" = 0 ] || [ "${type}" != "recovery" ]) && \
        ([ "${GRUB_GFXPAYLOAD_LINUX}" != "" ] || [ "${gfxpayload_dynamic}" = 1 ]); then
        echo "${submenu_indentation}	gfxmode \${linux_gfx_mode}"
    fi
    echo "${submenu_indentation}	insmod gzio"
    echo "${submenu_indentation}	if [ \"\${grub_platform}\" = xen ]; then insmod xzio; insmod lzopio; fi"
    if [ -n "$boot_devices" ]; then
        for device in ${boot_devices}; do
            echo "${submenu_indentation}	if [ "${boot_device}" = "${device}" ]; then"
            echo "$(prepare_grub_to_access_device_cached "${device}" $(( submenu_level +1 )) )"
            echo "${submenu_indentation}	fi"
        done
    else
        echo "$(prepare_grub_to_access_device_cached "${boot_device}" "${submenu_level}")"
    fi
    if [ "${quiet_boot}" = 0 ] || [ "${type}" != simple ]; then
        echo "${submenu_indentation}	echo $(gettext_printf "Loading Linux %s ..." ${kernel_version} | grub_quote)"
    fi
    linux_default_args="${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
    if [ ${type} = "recovery" ]; then
        linux_default_args="${GRUB_CMDLINE_LINUX_RECOVERY} ${GRUB_CMDLINE_LINUX}"
    fi
    echo "${submenu_indentation}	linux	${kernel} root=ZFS=${dataset} ro ${linux_default_args} ${kernel_additional_args}"
    if [ "${quiet_boot}" = 0 ] || [ "${type}" != simple ]; then
        echo "${submenu_indentation}	echo '$(gettext_printf "Loading initial ramdisk ..." | grub_quote)'"
    fi
    echo "${submenu_indentation}	initrd	${initrd}"
    echo "${submenu_indentation}}"
}
# Generate a GRUB Menu from menu meta data
# $1 menu metadata
generate_grub_menu() {
    local menu_metadata="$1"
    local last_section=""
    local main_dataset_name=""
    local main_dataset=""
    local have_zsys=""
    if [ -z "${menu_metadata}" ]; then
        return
    fi
    CLASS="--class gnu-linux --class gnu --class os"
    if [ "${GRUB_DISTRIBUTOR}" = "" ] ; then
        OS=GNU/Linux
    else
        case ${GRUB_DISTRIBUTOR} in
            Ubuntu|Kubuntu)
            OS="${GRUB_DISTRIBUTOR}"
            ;;
            *)
            OS="${GRUB_DISTRIBUTOR} GNU/Linux"
            ;;
        esac
        CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1 | LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
    fi
    if [ -x /lib/recovery-mode/recovery-menu ]; then
        GRUB_CMDLINE_LINUX_RECOVERY=recovery
    else
        GRUB_CMDLINE_LINUX_RECOVERY=single
    fi
    if [ "${ubuntu_recovery}" = 1 ]; then
        GRUB_CMDLINE_LINUX_RECOVERY="${GRUB_CMDLINE_LINUX_RECOVERY} nomodeset"
    fi
    case "$GENKERNEL_ARCH" in
        x86*) GRUB_CMDLINE_LINUX_RECOVERY="$GRUB_CMDLINE_LINUX_RECOVERY dis_ucode_ldr";;
    esac
    if [ "${vt_handoff}" = 1 ]; then
        for word in ${GRUB_CMDLINE_LINUX_DEFAULT}; do
            if [ "${word}" = splash ]; then
                GRUB_CMDLINE_LINUX_DEFAULT="${GRUB_CMDLINE_LINUX_DEFAULT} \${vt_handoff}"
            fi
        done
    fi
    print_menu_prologue
    cat<<'EOF'
function zsyshistorymenu {
	# $1: root dataset (eg rpool/ROOT/ubuntu_2zhm07@autozsys_k56fr6)
	# $2: boot device id (eg 411f29ce1557bfed)
	# $3: initrd (eg /BOOT/ubuntu_2zhm07@autozsys_k56fr6/initrd.img-5.4.0-21-generic)
	# $4: kernel (eg /BOOT/ubuntu_2zhm07@autozsys_k56fr6/vmlinuz-5.4.0-21-generic)
	# $5: kernel_version (eg 5.4.0-21-generic)
	set root_dataset="${1}"
	set boot_device="${2}"
	set initrd="${3}"
	set kernel="${4}"
	set kversion="${5}"
EOF
    boot_devices=$(echo "${menu_metadata}" | cut -d"$(printf '\t')" -f6 | sort -u)
    title=$(gettext_printf "Revert system only")
    zfs_linux_entry 1 "${title}" "simple" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' '' "${boot_devices}"
    title="$(gettext_printf "Revert system and user data")"
    zfs_linux_entry 1 "${title}" "simple" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' 'zsys-revert=userdata' "${boot_devices}"
    GRUB_DISABLE_RECOVERY="${GRUB_DISABLE_RECOVERY:-}"
    if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
        title="$(gettext_printf "Revert system only (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
        zfs_linux_entry 1 "${title}" "recovery" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' '' "${boot_devices}"
        title="$(gettext_printf "Revert system and user data (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
        zfs_linux_entry 1 "${title}" "recovery" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' 'zsys-revert=userdata' "${boot_devices}"
    fi
echo "}"
echo
    # IFS is set to TAB (ASCII 0x09)
    echo "${menu_metadata}" |
    {
        at_least_one_entry=0
        have_zsys="$(which zsysd || true)"
        while IFS="$(printf '\t')" read -r machineid iszsys section name dataset device initrd kernel opt; do
            # Disable history for non zsys system or if systems is a zsys one and zsys isn't installed.
            # In pure zfs systems, we identified multiple issues due to the mount generator
            # in upstream zfs which makes it incompatible. Don't show history for now.
            if [ "${section}" = "history" ]; then
                if [ "${iszsys}" != "yes" ] || [ "${iszsys}" = "yes" -a -z "${have_zsys}" ]; then
                    continue
                fi
            fi
            if [ "${last_section}" != "${section}" -a -n "${last_section}" ]; then
                # Close previous section wrapper
                if [ "${last_section}" != "main" ]; then
                    echo "}"    # Add grub_tabs
                    at_least_one_entry=0
                fi
            fi
            case "${section}" in
                main)
                    title="${name}"
                    main_dataset_name="${name}"
                    main_dataset="${dataset}"
                    kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
                    zfs_linux_entry 0 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
                    at_least_one_entry=1
                ;;
                advanced)
                    # normal and recovery entries for a given kernel
                    if [ "${last_section}" != "${section}" ]; then
                        echo "submenu '$(gettext_printf "Advanced options for %s" "${main_dataset_name}" | grub_quote)' \${menuentry_id_option} 'gnulinux-advanced-${main_dataset}' {"
                    fi
                    last_booted_kernel_marker=""
                    if [ "${opt}" = "true" ]; then
                        last_booted_kernel_marker="* "
                    fi
                    kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
                    title="$(gettext_printf "%s%s, with Linux %s" "${last_booted_kernel_marker}" "${name}" "${kernel_version}")"
                    zfs_linux_entry 1 "${title}" "advanced" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
                    GRUB_DISABLE_RECOVERY=${GRUB_DISABLE_RECOVERY:-}
                    if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
                        title="$(gettext_printf "%s%s, with Linux %s (%s)" "${last_booted_kernel_marker}" "${name}" "${kernel_version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
                        zfs_linux_entry 1 "${title}" "recovery" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
                    fi
                    at_least_one_entry=1
                ;;
                history)
                    # Revert to a snapshot
                    # revert system, revert system and user data and associated recovery entries
                    if [ "${last_section}" != "${section}" ]; then
                        echo "submenu '$(gettext_printf "History for %s" "${main_dataset_name}" | grub_quote)' \${menuentry_id_option} 'gnulinux-history-${main_dataset}' {"
                    fi
                    if [ "${iszsys}" = "yes" ]; then
                        title="$(gettext_printf "Revert to %s" "${name}" | grub_quote)"
                    else
                        title="$(gettext_printf "Boot on %s" "${name}" | grub_quote)"
                    fi
                    echo "	submenu '${title}' \${menuentry_id_option} 'gnulinux-history-${dataset}' {"
                    kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
                    # Zsys only: let revert system without destroying snapshots
                    if [ "${iszsys}" = "yes" ]; then
                        echo "${grub_tab}${grub_tab}zsyshistorymenu" \"${dataset}\" \"${device}\" \"${initrd}\" \"${kernel}\" \"${kernel_version}\"
                    # Non-zsys: boot temporarly on snapshots or rollback (destroying intermediate snapshots)
                    else
                        title="$(gettext_printf "One time boot")"
                        zfs_linux_entry 2 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
                        GRUB_DISABLE_RECOVERY="${GRUB_DISABLE_RECOVERY:-}"
                        if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
                            title="$(gettext_printf "One time boot (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
                            zfs_linux_entry 2 "${title}" "recovery" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
                        fi
                        title="$(gettext_printf "Revert system (all intermediate snapshots will be destroyed)")"
                        zfs_linux_entry 2 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}" "rollback=yes"
                    fi
                    echo "	}"
                    at_least_one_entry=1
                ;;
                *)
                    grub_warn "unknown section: ${section}. Ignoring entry ${name} for ${dataset}"
                ;;
            esac
            last_section="${section}"
        done
        if [ "${at_least_one_entry}" -eq 1 ]; then
            echo "}"
        fi
    }
}
# don't add trailing newline of variable is empty
# $1: content to write
# $2: destination file
trailing_newline_if_not_empty() {
    content="$1"
    dest="$2"
    if [ -z "${content}" ]; then
        rm -f "${dest}"
        touch "${dest}"
        return
    fi
    echo "${content}" > "${dest}"
}
GRUB_LINUX_ZFS_TEST="${GRUB_LINUX_ZFS_TEST:-}"
case "${GRUB_LINUX_ZFS_TEST}" in
    bootlist)
        # Import all available pools on the system and return imported list
        imported_pools=$(import_pools)
        boot_list="$(bootlist ${MNTDIR})"
        trailing_newline_if_not_empty "${boot_list}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
        break
    ;;
    metamenu)
        boot_list="$(cat ${GRUB_LINUX_ZFS_TEST_INPUT})"
        menu_metadata="$(generate_grub_menu_metadata "${boot_list}")"
        trailing_newline_if_not_empty "${menu_metadata}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
        break
    ;;
    grubmenu)
        menu_metadata="$(cat ${GRUB_LINUX_ZFS_TEST_INPUT})"
        grub_menu=$(generate_grub_menu "${menu_metadata}")
        trailing_newline_if_not_empty "${grub_menu}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
        break
    ;;
    *)
        # Import all available pools on the system and return imported list
        imported_pools=$(import_pools)
        # Generate the complete list of boot entries
        boot_list="$(bootlist ${MNTDIR})"
        # Create boot menu meta data from the list of boot entries
        menu_metadata="$(generate_grub_menu_metadata "${boot_list}")"
        # Create boot menu meta data from the list of boot entries
        grub_menu="$(generate_grub_menu "${menu_metadata}")"
        if [ -n "${grub_menu}" ]; then
            # We want the trailing newline as a marker will be added
            echo "${grub_menu}"
        fi
    ;;
esac

========================= sda8/etc/grub.d/32_linux_xen =========================

#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010  Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
. "$pkgdatadir/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
CLASS="--class gnu-linux --class gnu --class os --class xen"
SUPPORTED_INITS="sysvinit:/lib/sysvinit/init systemd:/lib/systemd/systemd upstart:/sbin/upstart"
if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then
  OS=GNU/Linux
else
  OS="${GRUB_DISTRIBUTOR} GNU/Linux"
  CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
# loop-AES arranges things so that /dev/loop/X can be our root device, but
# the initrds that Linux uses don't like that.
case ${GRUB_DEVICE} in
  /dev/loop/*|/dev/loop[0-9])
    GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"`
    # We can't cope with devices loop-mounted from files here.
    case ${GRUB_DEVICE} in
      /dev/*) ;;
      *) exit 0 ;;
    esac
  ;;
esac
# Default to disabling partition uuid support to maintian compatibility with
# older kernels.
GRUB_DISABLE_LINUX_PARTUUID=${GRUB_DISABLE_LINUX_PARTUUID-true}
# btrfs may reside on multiple devices. We cannot pass them as value of root= parameter
# and mounting btrfs requires user space scanning, so force UUID in this case.
if ( [ "x${GRUB_DEVICE_UUID}" = "x" ] && [ "x${GRUB_DEVICE_PARTUUID}" = "x" ] ) \
    || ( [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \
	&& [ "x${GRUB_DISABLE_LINUX_PARTUUID}" = "xtrue" ] ) \
    || ( ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \
	&& ! test -e "/dev/disk/by-partuuid/${GRUB_DEVICE_PARTUUID}" ) \
    || ( test -e "${GRUB_DEVICE}" && uses_abstraction "${GRUB_DEVICE}" lvm ); then
  LINUX_ROOT_DEVICE=${GRUB_DEVICE}
elif [ "x${GRUB_DEVICE_UUID}" = "x" ] \
    || [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ]; then
  LINUX_ROOT_DEVICE=PARTUUID=${GRUB_DEVICE_PARTUUID}
else
  LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID}
fi
# Allow overriding GRUB_CMDLINE_LINUX and GRUB_CMDLINE_LINUX_DEFAULT.
if [ "${GRUB_CMDLINE_LINUX_XEN_REPLACE}" ]; then
  GRUB_CMDLINE_LINUX="${GRUB_CMDLINE_LINUX_XEN_REPLACE}"
fi
if [ "${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}" ]; then
  GRUB_CMDLINE_LINUX_DEFAULT="${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}"
fi
case x"$GRUB_FS" in
    xbtrfs)
	rootsubvol="`make_system_path_relative_to_its_root /`"
	rootsubvol="${rootsubvol#/}"
	if [ "x${rootsubvol}" != x ]; then
	    GRUB_CMDLINE_LINUX="rootflags=subvol=${rootsubvol} ${GRUB_CMDLINE_LINUX}"
	fi;;
    xzfs)
	rpool=`${grub_probe} --device ${GRUB_DEVICE} --target=fs_label 2>/dev/null || true`
	bootfs="`make_system_path_relative_to_its_root / | sed -e "s,@$,,"`"
	LINUX_ROOT_DEVICE="ZFS=${rpool}${bootfs%/}"
	;;
esac
title_correction_code=
linux_entry ()
{
  os="$1"
  version="$2"
  xen_version="$3"
  type="$4"
  args="$5"
  xen_args="$6"
  if [ -z "$boot_device_id" ]; then
      boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
  fi
  if [ x$type != xsimple ] ; then
      if [ x$type = xrecovery ] ; then
	  title="$(gettext_printf "%s, with Xen %s and Linux %s (%s)" "${os}" "${xen_version}" "${version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
      elif [ "${type#init-}" != "$type" ] ; then
	  title="$(gettext_printf "%s, with Xen %s and Linux %s (%s)" "${os}" "${xen_version}" "${version}" "${type#init-}")"
      else
	  title="$(gettext_printf "%s, with Xen %s and Linux %s" "${os}" "${xen_version}" "${version}")"
      fi
      replacement_title="$(echo "Advanced options for ${OS}" | sed 's,>,>>,g')>$(echo "$title" | sed 's,>,>>,g')"
      if [ x"Xen ${xen_version}>$title" = x"$GRUB_ACTUAL_DEFAULT" ]; then
         quoted="$(echo "$GRUB_ACTUAL_DEFAULT" | grub_quote)"
         title_correction_code="${title_correction_code}if [ \"x\$default\" = '$quoted' ]; then default='$(echo "$replacement_title" | grub_quote)'; fi;"
         grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")"
      fi
      echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'xen-gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
  else
      title="$(gettext_printf "%s, with Xen hypervisor" "${os}")"
      echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'xen-gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
  fi
  if [ x$type != xrecovery ] ; then
      save_default_entry | grub_add_tab | sed "s/^/$submenu_indentation/"
  fi
  if [ -z "${prepare_boot_cache}" ]; then
    prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | grub_add_tab)"
  fi
  printf '%s\n' "${prepare_boot_cache}" | sed "s/^/$submenu_indentation/"
  xmessage="$(gettext_printf "Loading Xen %s ..." ${xen_version})"
  lmessage="$(gettext_printf "Loading Linux %s ..." ${version})"
  sed "s/^/$submenu_indentation/" << EOF
	echo	'$(echo "$xmessage" | grub_quote)'
        if [ "\$grub_platform" = "pc" -o "\$grub_platform" = "" ]; then
            xen_rm_opts=
        else
            xen_rm_opts="no-real-mode edd=off"
        fi
	${xen_loader}	${rel_xen_dirname}/${xen_basename} placeholder ${xen_args} \${xen_rm_opts}
	echo	'$(echo "$lmessage" | grub_quote)'
	${module_loader}	${rel_dirname}/${basename} placeholder root=${linux_root_device_thisversion} ro ${args}
EOF
  if test -n "${initrd}" ; then
    # TRANSLATORS: ramdisk isn't identifier. Should be translated.
    message="$(gettext_printf "Loading initial ramdisk ...")"
    initrd_path=
    for i in ${initrd}; do
       initrd_path="${initrd_path} ${rel_dirname}/${i}"
    done
    sed "s/^/$submenu_indentation/" << EOF
	echo	'$(echo "$message" | grub_quote)'
	${module_loader}	--nounzip   $(echo $initrd_path)
EOF
  fi
  sed "s/^/$submenu_indentation/" << EOF
}
EOF
}
linux_list=
for i in /boot/vmlinu[xz]-* /vmlinu[xz]-* /boot/kernel-*; do
    if grub_file_is_not_garbage "$i"; then
    	basename=$(basename $i)
	version=$(echo $basename | sed -e "s,^[^0-9]*-,,g")
	dirname=$(dirname $i)
	config=
	for j in "${dirname}/config-${version}" "${dirname}/config-${alt_version}" "/etc/kernels/kernel-config-${version}" ; do
	    if test -e "${j}" ; then
		config="${j}"
		break
	    fi
	done
        if (grep -qx "CONFIG_XEN_DOM0=y" "${config}" 2> /dev/null || grep -qx "CONFIG_XEN_PRIVILEGED_GUEST=y" "${config}" 2> /dev/null); then linux_list="$linux_list $i" ; fi
    fi
done
if [ "x${linux_list}" = "x" ] ; then
    exit 0
fi
file_is_not_sym () {
    case "$1" in
	*/xen-syms-*)
	    return 1;;
	*)
	    return 0;;
    esac
}
xen_list=
for i in /boot/xen*; do
    if grub_file_is_not_garbage "$i" && file_is_not_sym "$i" ; then xen_list="$xen_list $i" ; fi
done
prepare_boot_cache=
boot_device_id=
title_correction_code=
machine=`uname -m`
case "$machine" in
    i?86) GENKERNEL_ARCH="x86" ;;
    mips|mips64) GENKERNEL_ARCH="mips" ;;
    mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
    arm*) GENKERNEL_ARCH="arm" ;;
    *) GENKERNEL_ARCH="$machine" ;;
esac
# Extra indentation to add to menu entries in a submenu. We're not in a submenu
# yet, so it's empty. In a submenu it will be equal to '\t' (one tab).
submenu_indentation=""
is_top_level=true
while [ "x${xen_list}" != "x" ] ; do
    list="${linux_list}"
    current_xen=`version_find_latest $xen_list`
    xen_basename=`basename ${current_xen}`
    xen_dirname=`dirname ${current_xen}`
    rel_xen_dirname=`make_system_path_relative_to_its_root $xen_dirname`
    xen_version=`echo $xen_basename | sed -e "s,.gz$,,g;s,^xen-,,g"`
    if [ -z "$boot_device_id" ]; then
	boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
    fi
    if [ "x$is_top_level" != xtrue ]; then
	echo "	submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {"
    fi
    if ($grub_file --is-arm64-efi $current_xen); then
	xen_loader="xen_hypervisor"
	module_loader="xen_module"
    else
	if ($grub_file --is-x86-multiboot2 $current_xen); then
	    xen_loader="multiboot2"
	    module_loader="module2"
	else
	    xen_loader="multiboot"
	    module_loader="module"
        fi
    fi
    initrd_early=
    for i in ${GRUB_EARLY_INITRD_LINUX_STOCK} \
             ${GRUB_EARLY_INITRD_LINUX_CUSTOM}; do
       if test -e "${xen_dirname}/${i}" ; then
          initrd_early="${initrd_early} ${i}"
       fi
    done
    while [ "x$list" != "x" ] ; do
	linux=`version_find_latest $list`
	gettext_printf "Found linux image: %s\n" "$linux" >&2
	basename=`basename $linux`
	dirname=`dirname $linux`
	rel_dirname=`make_system_path_relative_to_its_root $dirname`
	version=`echo $basename | sed -e "s,^[^0-9]*-,,g"`
	alt_version=`echo $version | sed -e "s,\.old$,,g"`
	linux_root_device_thisversion="${LINUX_ROOT_DEVICE}"
	initrd_real=
	for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
	   "initrd-${version}" "initramfs-${version}.img" \
	   "initrd.img-${alt_version}" "initrd-${alt_version}.img" \
	   "initrd-${alt_version}" "initramfs-${alt_version}.img" \
	   "initramfs-genkernel-${version}" \
	   "initramfs-genkernel-${alt_version}" \
	   "initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
	   "initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}" ; do
	    if test -e "${dirname}/${i}" ; then
		initrd_real="$i"
		break
	    fi
	done
	initrd=
	if test -n "${initrd_early}" || test -n "${initrd_real}"; then
	    initrd="${initrd_early} ${initrd_real}"
	    initrd_display=
	    for i in ${initrd}; do
		initrd_display="${initrd_display} ${dirname}/${i}"
	    done
	    gettext_printf "Found initrd image: %s\n" "$(echo $initrd_display)" >&2
	fi
	if test -z "${initrd_real}"; then
    # "UUID=" magic is parsed by initrds.  Since there's no initrd, it can't work here.
	    if [ "x${GRUB_DEVICE_PARTUUID}" = "x" ] \
		|| [ "x${GRUB_DISABLE_LINUX_PARTUUID}" = "xtrue" ]; then
		linux_root_device_thisversion=${GRUB_DEVICE}
	    else
		linux_root_device_thisversion=PARTUUID=${GRUB_DEVICE_PARTUUID}
	    fi
	fi
	if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then
	    linux_entry "${OS}" "${version}" "${xen_version}" simple \
		"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
	    submenu_indentation="$grub_tab$grub_tab"
    
	    if [ -z "$boot_device_id" ]; then
		boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
	    fi
            # TRANSLATORS: %s is replaced with an OS name
	    echo "submenu '$(gettext_printf "Advanced options for %s (with Xen hypervisor)" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
	echo "	submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {"
	   is_top_level=false
	fi
	linux_entry "${OS}" "${version}" "${xen_version}" advanced \
	    "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
	for supported_init in ${SUPPORTED_INITS}; do
	    init_path="${supported_init#*:}"
	    if [ -x "${init_path}" ] && [ "$(readlink -f /sbin/init)" != "$(readlink -f "${init_path}")" ]; then
		linux_entry "${OS}" "${version}" "${xen_version}" "init-${supported_init%%:*}" \
		    "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT} init=${init_path}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
	    fi
	done
	if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then
	    linux_entry "${OS}" "${version}" "${xen_version}" recovery \
		"single ${GRUB_CMDLINE_LINUX}" "${GRUB_CMDLINE_XEN}"
	fi
	list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
    done
    if [ x"$is_top_level" != xtrue ]; then
	echo '	}'
    fi
    xen_list=`echo $xen_list | tr ' ' '\n' | fgrep -vx "$current_xen" | tr '\n' ' '`
done
# If at least one kernel was found, then we need to
# add a closing '}' for the submenu command.
if [ x"$is_top_level" != xtrue ]; then
  echo '}'
fi
echo "$title_correction_code"

====================== sda8/etc/grub.d/41_os-prober_proxy ======================

#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/os-prober' | /etc/grub.d/bin/grubcfg_proxy "+'Ubuntu Hirsute Hippo (development branch) (21.04) (on /dev/sda12)'~596a740dabc2afebdb38ab3d77f324dc~ as 'Kubuntu RESCUE [P12]'
+'Windows Boot Manager (on /dev/sda2)'~dc71b4767132c7dd09e1ae2648576ed8~ as 'Windows BM [P2]'
-*
-'Ubuntu 21.10 (21.10) (on /dev/sda9)'~8fb01c5fe7d2668caed28f00345eb071~
-'SUBMENU' as 'Advanced options for Ubuntu 21.10 (21.10) (on /dev/sda9)'{-'Advanced options for Ubuntu 21.10 (21.10) (on /dev/sda9)'/*, -'Advanced options for Ubuntu 21.10 (21.10) (on /dev/sda9)'/'Kubuntu 21.04 [GPT9] (on /dev/sda9)'~f73af64e229ba5caa3912de87ee2a60a~}
-#text
-'SUBMENU' as 'Advanced options for Ubuntu Hirsute Hippo (development branch) (21.04) (on /dev/sda12)'{-'Advanced options for Ubuntu Hirsute Hippo (development branch) (21.04) (on /dev/sda12)'/*, -'Advanced options for Ubuntu Hirsute Hippo (development branch) (21.04) (on /dev/sda12)'/'Ubuntu Rescue (on /dev/sda12)'~48794bcb44d764d4a135a902026275c5~ as 'Ubuntu (on /dev/sda12)', -'Advanced options for Ubuntu Hirsute Hippo (development branch) (21.04) (on /dev/sda12)'/'Ubuntu Rescue (on /dev/sda12)'~48794bcb44d764d4a135a902026275c5~ as 'Ubuntu, with Linux 5.10.0-14-generic (on /dev/sda12)'}
"

======================= sda8/etc/grub.d/42_uefi-firmware =======================

#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2012  Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
. "${datarootdir}/grub/grub-mkconfig_lib"
efi_vars_dir=/sys/firmware/efi/vars
EFI_GLOBAL_VARIABLE=8be4df61-93ca-11d2-aa0d-00e098032b8c
OsIndications="$efi_vars_dir/OsIndicationsSupported-$EFI_GLOBAL_VARIABLE/data"
if [ -e "$OsIndications" ] && \
   [ "$(( $(printf 0x%x \'"$(cat $OsIndications | cut -b1)") & 1 ))" = 1 ]; then
  LABEL="UEFI Firmware Settings"
  gettext_printf "Adding boot menu entry for UEFI Firmware Settings\n" >&2
  onstr="$(gettext_printf "(on %s)" "${DEVICE}")"
  cat << EOF
menuentry '$LABEL' \$menuentry_id_option 'uefi-firmware' {
	fwsetup
}
EOF
fi

======================= sda8/etc/grub.d/43_custom_proxy ========================

#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/custom' | /etc/grub.d/bin/grubcfg_proxy "-'Kubuntu 21.04 [GPT9] (on /dev/sda9)'~43beb63a66aa7b8414adf3ca359baad5~ as 'Kubuntu 21.04 noyau 36 [GPT9] (on /dev/sda9)'
+*
+#text
"

====================== sda9/boot/grub/grub.cfg (filtered) ======================

Kubuntu 21.04 [GPT9]   aa9a050e-bf13-494c-8762-5f05012ddb85
KDE neon User Edition 5.22 (20.04) (sur sda8)   7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d
Neon 20.04 [P8] (sur sda8)   7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d
Kubuntu Rescue [GPT12]   8aaa234b-a9cc-426a-8eac-2fdb0ed4bd4b
Windows [GPT2]   osprober-efi-F2B4-5224
### END /etc/grub.d/30_os-prober_proxy ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda9/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda8 during installation
UUID=aa9a050e-bf13-494c-8762-5f05012ddb85 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda2 during installation
UUID=F2B4-5224  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sda9 during installation
UUID=1886f2c9-76a2-444e-9b32-a1ef35e06afb none            swap    sw              0       0
UUID=54B8B5A1B8B58252							/media/data/Win.10.DOS	ntfs	ro,locale=fr_BE.UTF-8,uid=1000,noauto	0	0
UUID=6E8AF8EA8AF8B027							/media/data/Win.10.GPT1	ntfs	ro,locale=fr_BE.UTF-8,uid=1000,noauto	0	0
UUID=64D82434D82406C0							/media/data/Win.10.GPT2	ntfs	ro,locale=fr_BE.UTF-8,uid=1000,noauto	0	0
UUID=FEFE8D31FE8CE2EF							/media/data/Ood			ntfs	rw,locale=fr_BE.UTF-8,uid=1000,auto		0	0
UUID=2ADCEB11DCEAD5DB							/media/data/OSv			ntfs	rw,locale=fr_BE.UTF-8,uid=1000,auto		0	0
UUID=535D7BE603D9AC2E							/media/data/Thumbs		ntfs	rw,locale=fr_BE.UTF-8,uid=1000,auto		0	0

======================= sda9/etc/default/grub (filtered) =======================

GRUB_DEFAULT="0"
GRUB_TIMEOUT_STYLE="hidden"
GRUB_TIMEOUT=4
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda9: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 161.660888672 = 173.582057472  boot/grub/grub.cfg                             2
 156.679683685 = 168.233529344  boot/vmlinuz                                   2
 147.763740540 = 158.660108288  boot/vmlinuz-5.11.0-37-generic                 2
 169.329830170 = 181.816520704  boot/vmlinuz-5.13.0-19-generic                 2
 156.679683685 = 168.233529344  boot/vmlinuz-5.13.0-20-generic                 2
 158.792125702 = 170.501746688  boot/vmlinuz-5.4.0-52-generic                  1
 157.497142792 = 169.111269376  boot/vmlinuz-5.8.0-26-generic                  1
 169.329830170 = 181.816520704  boot/vmlinuz.old                               2
 164.818470001 = 176.972484608  boot/initrd.img                                5
 167.959590912 = 180.345237504  boot/initrd.img-5.11.0-37-generic             42
 169.093410492 = 181.562667008  boot/initrd.img-5.13.0-19-generic             27
 164.818470001 = 176.972484608  boot/initrd.img-5.13.0-20-generic              5
 169.379150391 = 181.869477888  boot/initrd.img-5.4.0-52-generic               2
 168.847900391 = 181.299052544  boot/initrd.img-5.8.0-26-generic               3
 169.093410492 = 181.562667008  boot/initrd.img.old                           27

===================== sda9: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root  1418 avr  8  2021 10_linux_proxy
-rwxr-xr-x 1 root root 43031 fév 12  2021 10_linux_zfs
-rwxr-xr-x 1 root root 12894 fév 12  2021 20_linux_xen
-rwxr-xr-x 1 root root  1747 avr  8  2021 30_os-prober_proxy
-rwxr-xr-x 1 root root  1424 fév 12  2021 30_uefi-firmware
-rwxr-xr-x 1 root root   214 fév 12  2021 40_custom
-rwxr-xr-x 1 root root   216 fév 12  2021 41_custom
drwxr-xr-x 4 root root  4096 mar  5  2021 backup
drwxr-xr-x 2 root root  4096 mar  5  2021 bin
drwxr-xr-x 2 root root  4096 avr  8  2021 proxifiedScripts

===================== sda12/boot/grub/grub.cfg (filtered) ======================

Ubuntu Rescue   8aaa234b-a9cc-426a-8eac-2fdb0ed4bd4b
Windows Boot Manager (on sda2)   osprober-efi-F2B4-5224
KDE neon User Edition 5.22 (20.04) (on sda8)   7a98fbcc-7ae3-4958-94ec-10a8fb8b4c8d
Ubuntu 21.04 (21.04) (on sda9)   aa9a050e-bf13-494c-8762-5f05012ddb85
Kubuntu 21.04 [GPT9] (on sda9)   aa9a050e-bf13-494c-8762-5f05012ddb85
Kubuntu Rescue [GPT12] (on sda9)   aa9a050e-bf13-494c-8762-5f05012ddb85
### END /etc/grub.d/30_os-prober_proxy ###

========================== sda12/etc/fstab (filtered) ==========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda12 during installation
UUID=8aaa234b-a9cc-426a-8eac-2fdb0ed4bd4b /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda2 during installation
UUID=F2B4-5224  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sda11 during installation
UUID=1886f2c9-76a2-444e-9b32-a1ef35e06afb none            swap    sw              0       0

====================== sda12/etc/default/grub (filtered) =======================

GRUB_DEFAULT="0"
GRUB_TIMEOUT_STYLE="hidden"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

=================== sda12: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 184.878402710 = 198.511673344  boot/grub/grub.cfg                             3
 178.492069244 = 191.654400000  boot/vmlinuz                                   2
 178.492069244 = 191.654400000  boot/vmlinuz-5.10.0-14-generic                 2
 179.258670807 = 192.477532160  boot/initrd.img                                3
 179.258670807 = 192.477532160  boot/initrd.img-5.10.0-14-generic              3
 179.258670807 = 192.477532160  boot/initrd.img.old                            3

===================== sda12: ls -l /etc/grub.d/ (filtered) =====================

-rwxr-xr-x 1 root root   487 oct 18 10:22 10_linux_proxy
-rwxr-xr-x 1 root root 43031 fév 12  2021 11_linux_zfs
-rwxr-xr-x 1 root root 12894 fév 12  2021 20_linux_xen
-rwxr-xr-x 1 root root  1992 aoû 18  2020 21_memtest86+
-rwxr-xr-x 1 root root  1472 oct 18 10:22 30_os-prober_proxy
-rwxr-xr-x 1 root root  1424 fév 12  2021 31_uefi-firmware
-rwxr-xr-x 1 root root   194 oct 18 10:22 40_custom_proxy
-rwxr-xr-x 1 root root   216 fév 12  2021 41_custom
drwxr-xr-x 4 root root  4096 oct 18 10:22 backup
drwxr-xr-x 2 root root  4096 oct 18 10:22 bin
drwxr-xr-x 2 root root  4096 oct 18 10:22 proxifiedScripts

======================== sda12/etc/grub.d/11_linux_zfs =========================

#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2019 Canonical Ltd.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
datarootdir="/usr/share"
ubuntu_recovery="1"
quiet_boot="1"
quick_boot="1"
gfxpayload_dynamic="1"
vt_handoff="1"
. "${pkgdatadir}/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
set -u
## Skip early if zfs utils isn't installed (instead of failing on first zpool list)
if ! `which zfs >/dev/null 2>&1`; then
    exit 0
fi
imported_pools=""
MNTDIR="$(mktemp -d ${TMPDIR:-/tmp}/zfsmnt.XXXXXX)"
ZFSTMP="$(mktemp -d ${TMPDIR:-/tmp}/zfstmp.XXXXXX)"
machine="$(uname -m)"
case "${machine}" in
    i?86) GENKERNEL_ARCH="x86" ;;
    mips|mips64) GENKERNEL_ARCH="mips" ;;
    mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
    arm*) GENKERNEL_ARCH="arm" ;;
    *) GENKERNEL_ARCH="${machine}" ;;
esac
RC=0
on_exit() {
    # Restore initial zpool import state
    for pool in ${imported_pools}; do
        zpool export "${pool}"
    done
    mountpoint -q "${MNTDIR}"  && umount "${MNTDIR}" || true
    rmdir "${MNTDIR}"
    rm -rf "${ZFSTMP}"
    exit "${RC}"
}
trap on_exit EXIT INT QUIT ABRT PIPE TERM
# List ONLINE and DEGRADED pools
import_pools() {
    # We have to ignore zpool import output, as potentially multiple / will be available,
    # and we need to autodetect all zpools this way with their real mountpoints.
    local initial_pools="$(zpool list | awk '{if (NR>1) print $1}')"
    local all_pools=""
    local imported_pools=""
    local err=""
    set +e
    err="$(zpool import -f -a -o cachefile=none -o readonly=on -N 2>&1)"
    # Only print stderr if the command returned an error
    # (it can echo "No zpool to import" with success, which we don't want)
    if [ $? -ne 0 ]; then
        echo "Some pools couldn't be imported and will be ignored:\n${err}" >&2
    fi
    set -e
    all_pools="$(zpool list | awk '{if (NR>1) print $1}')"
    for pool in ${all_pools}; do
        if echo "${initial_pools}" | grep -wq "${pool}"; then
            continue
        fi
        imported_pools="${imported_pools} ${pool}"
    done
    echo "${imported_pools}"
}
# List all the dataset with a root mountpoint
get_root_datasets() {
    local pools="$(zpool list | awk '{if (NR>1) print $1}')"
    for p in ${pools}; do
        local rel_pool_root=$(zpool get -H altroot ${p} | awk '{print $3}')
        if [ "${rel_pool_root}" = "-" ]; then
            rel_pool_root="/"
        fi
        zfs list -H -o name,canmount,mountpoint -t filesystem | grep -E '^'"${p}"'(\s|/[[:print:]]*\s)(on|noauto)\s'"${rel_pool_root}"'$' | awk '{print $1}'
    done
}
# find if given datasets can be mounted for directory and return its path (snapshot or real path)
# $1 is our current dataset name
# $2 directory path we look for (cannot contains /)
# $3 is the temporary mount directory to use
# $4 is the optional snapshot name
# return path for directory (which can be a mountpoint)
validate_system_dataset() {
    local dataset="$1"
    local directory="$2"
    local mntdir="$3"
    local snapshot_name="$4"
    local mount_path="${mntdir}/${directory}"
    if ! zfs list "${dataset}" >/dev/null 2>&1; then
        return
    fi
    if ! mount -o noatime,zfsutil -t zfs "${dataset}" "${mount_path}"; then
        grub_warn "Failed to find a valid directory '${directory}' for dataset '${dataset}@${snapshot_name}'. Ignoring"
        return
    fi
    local candidate_path="${mount_path}"
    if [ -n "${snapshot_name}" ]; then
        # WORKAROUND a bug https://github.com/zfsonlinux/zfs/issues/9958
        # Reading the content of a snapshot fails if it is not the first mount
        # for a given dataset
        first_mntdir=$(awk '{if ($1 == "'${dataset}'") {print $2; exit;}}' /proc/mounts)
        if [ "${first_mntdir}" = "/" ]; then
            # prevents // on candidate_path
            first_mntdir=""
        fi
        candidate_path="${first_mntdir}/.zfs/snapshot/${snapshot_name}"
    fi
    if [ -n "$(ls "${candidate_path}" 2>/dev/null)" ]; then
        echo "${candidate_path}"
        return
    else
        mountpoint -q "${mount_path}" && umount "${mount_path}" || true
    fi
}
# Detect system directory relevant to the other, trying to find the ones associated on the current dataset or snapshot/
# System directory should be at most a direct child dataset of main datasets (no recursivity)
# We can fallback trying other zfs pools if no match has been found.
# $1 is our current dataset name (which can have @snapshot name)
# $2 directory path we look for (cannot contains /)
# $3 restrict_to_same_pool (true|false) force looking for dataset with the same basename in the current dataset pool only
# $4 is the temporary mount directory to use
# $5 is the optional etc directory (if not $2 is not etc itself)
# return path for directory (which can be a mountpoint)
get_system_directory() {
    local dataset_path="$1"
    local directory="$2"
    local restrict_to_same_pool="$3"
    local mntdir="$4"
    local etc_dir="$5"
    if [ -z "${etc_dir}" ]; then
        etc_dir="${mntdir}/etc"
    fi
    local candidate_path="${mntdir}/${directory}"
    # 1. Look for /etc/fstab first (which will mount even on top of non empty $directory)
    local mounted_fstab_entry="false"
    if [ -f "${etc_dir}/fstab" ]; then
        mount_args=$(awk '/^[^#].*[ \t]\/'"${directory}"'[ \t]/ {print "-t", $3, $1}' "${etc_dir}/fstab")
        if [ -n "${mount_args}" ]; then
            mounted_fstab_entry="true"
            mount -o noatime ${mount_args} "${candidate_path}" || mounted_fstab_entry="false"
        fi
    fi
    # If directory isn't empty. Only count if coming from /etc/fstab. Will be
    # handled below otherwise as we are interested in potential snapshots.
    if [ "${mounted_fstab_entry}" = "true" -a -n "$(ls ${candidate_path} 2>/dev/null)" ]; then
        echo "${candidate_path}"
        return
    fi
    # 2. Handle zfs case, which can be a snapshots.
    local base_dataset_path="${dataset_path}"
    local snapshot_name=""
    # For snapshots we extract the parent dataset
    if echo "${dataset_path}" | grep -q '@'; then
        base_dataset_path=$(echo "${dataset_path}" | cut -d '@' -f1)
        snapshot_name=$(echo "${dataset_path}" | cut -d '@' -f2)
    fi
    base_dataset_name="${base_dataset_path##*/}"
    base_pool="$(echo "${base_dataset_path}" | cut -d'/' -f1)"
    # 2.a) Look for child dataset included in base dataset, which needs to hold same snapshot if any
    candidate_path=$(validate_system_dataset "${base_dataset_path}/${directory}" "${directory}" "${mntdir}" "${snapshot_name}")
    if [ -n "${candidate_path}" ]; then
        echo "${candidate_path}"
        return
    fi
    # 2.b) Look for current dataset (which is already mounted as /)
    candidate_path="${mntdir}/${directory}"
    if [ -n "${snapshot_name}" ]; then
        # WORKAROUND a bug https://github.com/zfsonlinux/zfs/issues/9958
        # Reading the content of a snapshot fails if it is not the first mount
        # for a given dataset
        first_mntdir=$(awk '{if ($1 == "'${base_dataset_path}'") {print $2; exit;}}' /proc/mounts)
        if [ "${first_mntdir}" = "/" ]; then
            # prevents // on candidate_path
            first_mntdir=""
        fi
        candidate_path="${first_mntdir}/.zfs/snapshot/${snapshot_name}/${directory}"
    fi
    if [ -n "$(ls "${candidate_path}" 2>/dev/null)" ]; then
        echo "${candidate_path}"
        return
    fi
    # 2.c) Look for every datasets in every pool which isn't the current dataset which holds:
    # - the same dataset name (last section) than our base_dataset_name
    # - mountpoint=directory
    # - canmount!=off
    all_same_base_dataset_name="$(zfs list -H -t filesystem -o name,canmount | awk '/^[^ ]+\/'"${base_dataset_name}"'[ \t](on|noauto)/ {print $1}') "
    # order by local pool datasets first
    current_pool_same_base_datasets=""
    other_pools_same_base_datasets=""
    root_pool=$(echo "${dataset_path%%/*}")
    for d in ${all_same_base_dataset_name}; do
        cur_dataset_pool=$(echo "${d%%/*}")
        if echo "${cur_dataset_pool}" | grep -wq "${root_pool}" 2>/dev/null ; then
            current_pool_same_base_datasets="${current_pool_same_base_datasets} ${d}"
        else
            other_pools_same_base_datasets="${other_pools_same_base_datasets} ${d}"
        fi
    done
    ordered_same_base_datasets="${current_pool_same_base_datasets} ${other_pools_same_base_datasets}"
    if [ "${restrict_to_same_pool}" = "true" ]; then
        ordered_same_base_datasets="${current_pool_same_base_datasets}"
    fi
    # now, loop over them
    for d in ${ordered_same_base_datasets}; do
        cur_dataset_pool=$(echo "${d%%/*}")
        rel_pool_root=$(zpool get -H altroot ${cur_dataset_pool} | awk '{print $3}')
        if [ "${rel_pool_root}" = "-" ]; then
            rel_pool_root=""
        fi
        # check mountpoint match
        candidate_dataset=$(zfs get -H mountpoint ${d} | grep -E "mountpoint\s${rel_pool_root}/${directory}\s" | awk '{print $1}')
        if [ -z "${candidate_dataset}" ]; then
            continue
        fi
        candidate_path=$(validate_system_dataset "${candidate_dataset}" "${directory}" "${mntdir}" "${snapshot_name}")
        if [ -n "${candidate_path}" ]; then
            echo "${candidate_path}"
            return
        fi
    done
    # 2.d) If we didn't find anything yet: check for persistent datasets corresponding to our mountpoint, with canmount=on without any snapshot associated:
    # Note: we go over previous datasets as well, but this is ok, as we didn't include them before.
    all_mountable_datasets="$(zfs list -t filesystem -o name,canmount | awk  '/^[^ ]+[ \t]+on/ {print $1}')"
    # order by local pool datasets first
    current_pool_datasets=""
    other_pools_datasets=""
    root_pool=$(echo "${dataset_path%%/*}")
    for d in ${all_mountable_datasets}; do
        cur_dataset_pool=$(echo "${d%%/*}")
        if echo "${cur_dataset_pool}" | grep -wq "${root_pool}" 2>/dev/null ; then
            current_pool_datasets="${current_pool_datasets} ${d}"
        else
            other_pools_datasets="${other_pools_datasets} ${d}"
        fi
    done
    ordered_datasets="${current_pool_datasets} ${other_pools_datasets}"
    if [ "${restrict_to_same_pool}" = "true" ]; then
        ordered_datasets="${current_pool_datasets}"
    fi
    for d in ${ordered_datasets}; do
        cur_dataset_pool=$(echo "${d%%/*}")
        rel_pool_root=$(zpool get -H altroot ${cur_dataset_pool} | awk '{print $3}')
        if [ "${rel_pool_root}" = "-" ]; then
            rel_pool_root=""
        fi
        # check mountpoint match
        candidate_dataset=$(zfs get -H mountpoint ${d} | grep -E "mountpoint\s${rel_pool_root}/${directory}\s" | awk '{print $1}')
        if [ -z "${candidate_dataset}" ]; then
            continue
        fi
        candidate_path=$(validate_system_dataset "${d}" "${directory}" "${mntdir}" "")
        if [ -n "${candidate_path}" ]; then
            echo "${candidate_path}"
            return
        fi
    done
    grub_warn "Failed to find a valid directory '${directory}' for dataset '${dataset_path}'. Ignoring"
    return
}
# Try our default layout bpool as a prefered layout (fast path)
# This is get_system_directory for boot optimized for our default installation layout
# $1 is our current dataset name (which can have @snapshot name)
# $2 is the temporary mount directory to use
# return path for directory (which can be a mountpoint) if found
try_default_layout_bpool() {
    local root_dataset_path="$1"
    local mntdir="$2"
    dataset_basename="${root_dataset_path##*/}"
    candidate_dataset="bpool/BOOT/${dataset_basename}"
    dataset_properties="$(zfs get -H mountpoint,canmount "${candidate_dataset}" 2>/dev/null | cut -f3 | paste -sd ' ')"
    if [ -z "${dataset_properties}" ]; then
        return
    fi
    rel_pool_root=$(zpool get -H altroot bpool | awk '{print $3}')
    if [ "${rel_pool_root}" = "-" ]; then
        rel_pool_root=""
    fi
    snapshot_name="${dataset_basename##*@}"
    [ "${snapshot_name}" = "${dataset_basename}" ] && snapshot_name=""
    if [ -z "${snapshot_name}" ]; then
        if ! echo "${dataset_properties}" | grep -Eq "${rel_pool_root}/boot (on|noauto)"; then
            return
        fi
    else
        candidate_dataset=$(echo "${candidate_dataset}" | cut -d '@' -f1)
    fi
    validate_system_dataset "${candidate_dataset}" "boot" "${mntdir}" "${snapshot_name}"
}
# Return if secure boot is enabled on that system
is_secure_boot_enabled() {
    if LANG=C mokutil --sb-state 2>/dev/null | grep -qi enabled; then
        echo "true"
        return
    fi
    echo "false"
    return
}
# Given a filesystem or snapshot dataset, returns dataset|machine id|pretty name|last used
# $1 is dataset we want information from
# $2 is the temporary mount directory to use
get_dataset_info() {
    local dataset="$1"
    local mntdir="$2"
    local base_dataset="${dataset}"
    local etc_dir="${mntdir}/etc"
    local is_snapshot="false"
    # For snapshot we extract the parent dataset
    if echo "${dataset}" | grep -q '@'; then
        base_dataset=$(echo "${dataset}" | cut -d '@' -f1)
        is_snapshot="true"
    fi
    mount -o noatime,zfsutil -t zfs "${base_dataset}" "${mntdir}"
    # read machine-id/os-release from /etc
    etc_dir=$(get_system_directory "${dataset}" "etc" "true" "${mntdir}" "")
    if [ -z  "${etc_dir}" ]; then
        grub_warn "Ignoring ${dataset}"
        mountpoint -q "${mntdir}/etc" && umount "${mntdir}/etc" || true
        umount "${mntdir}"
        return
    fi
    machine_id=""
    if [ -f "${etc_dir}/machine-id" ]; then
        machine_id=$(cat "${etc_dir}/machine-id")
    fi
    # We have to use a random temporary id if we don't have any machine-id file or if this one is empty
    # (mostly the case of new installations before first boot).
    # Let's use the dataset name directly for this.
    # Consequence is that all datasets are then separated.
    if [ -z "${machine_id}" ]; then
        machine_id="${dataset}"
    fi
    pretty_name=$(. "${etc_dir}/os-release" && echo "${PRETTY_NAME}")
    mountpoint -q "${mntdir}/etc" && umount "${mntdir}/etc" || true
    # read available kernels from /boot
    boot_dir="$(try_default_layout_bpool "${dataset}" "${mntdir}")"
    if [ -z "${boot_dir}" ]; then
        boot_dir=$(get_system_directory "${dataset}" "boot" "false" "${mntdir}" "${etc_dir}")
    fi
    if [ -z  "${boot_dir}" ]; then
        grub_warn "Ignoring ${dataset}"
        mountpoint -q "${mntdir}/boot" && umount "${mntdir}/boot" || true
        umount "${mntdir}"
        return
    fi
    initrd_list=""
    kernel_list=""
    candidate_kernel_list="$(find "${boot_dir}" -maxdepth 1 -type f -regex '.*/\(vmlinuz\|vmlinux\|kernel\)-.*')"
    while [ -n "${candidate_kernel_list}" ] ; do
        list_basename="$(echo "${candidate_kernel_list}" | sed -e 's#.*/##')"
        linux=$(version_find_latest ${list_basename})
        linux=$(echo "${candidate_kernel_list}" | while read k; do
            if [ "$(basename "${k}")" = "${linux}" ]; then
                echo -n "${k}"
                break
            fi
        done)
        # || true to not abort even if candidate_kernel_list is empty on last entry
        candidate_kernel_list="$(echo "${candidate_kernel_list}" | fgrep -vx "${linux}"||true)"
        if ! grub_file_is_not_garbage "${linux}" ; then
            continue
        fi
        # Filters entry if efi/non efi.
        # Note that for now we allow kernel without .efi.signed as those are signed kernel
        # on ubuntu, loaded by the shim.
        case "${linux}" in
            *.efi.signed)
                if [ "$(is_secure_boot_enabled)" = "false" ]; then
                    continue
                fi
            ;;
        esac
        linux_basename=$(basename "${linux}")
        linux_dirname=$(dirname "${linux}")
        version=$(echo "${linux_basename}" | sed -e "s,^[^0-9]*-,,g")
        alt_version=$(echo "${version}" | sed -e "s,\.old$,,g")
        gettext_printf "Found linux image: %s in %s\n" "${linux_basename}" "${dataset}" >&2
        initrd=""
        for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
            "initrd-${version}" "initramfs-${version}.img" \
            "initrd.img-${alt_version}" "initrd-${alt_version}.img" \
            "initrd-${alt_version}" "initramfs-${alt_version}.img" \
            "initramfs-genkernel-${version}" \
            "initramfs-genkernel-${alt_version}" \
            "initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
            "initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}"; do
            if test -e "${linux_dirname}/${i}" ; then
                initrd="$i"
                break
            fi
        done
        if test -z "${initrd}" ; then
            grub_warn "Couldn't find any valid initrd for dataset ${dataset}."
            continue
        fi
        gettext_printf "Found initrd image: %s in %s\n" "${initrd}" "${dataset}" >&2
        rel_linux_dirname=$(make_system_path_relative_to_its_root "${linux_dirname}")
        initrd_list="${initrd_list}|${rel_linux_dirname}/${initrd}"
        kernel_list="${kernel_list}|${rel_linux_dirname}/${linux_basename}"
    done
    initrd_list="${initrd_list#|}"
    kernel_list="${kernel_list#|}"
    initrd_device=$(${grub_probe} --target=device "${boot_dir}" | head -1)
    mountpoint -q "${mntdir}/boot" && umount "${mntdir}/boot" || true
    # We needed to look in / for snapshots on root dataset, umount there before zfs lazily unmount it
    case "${boot_dir}" in /boot/.zfs/snapshot/*)
        umount "${boot_dir}" || true
        ;;
    esac
    # for zsys snapshots: we want to know which kernel we successful last booted with
    last_booted_kernel=$(zfs get -H com.ubuntu.zsys:last-booted-kernel "${dataset}" | awk -v FS='\t' '{print $3}')
    # snapshot: last_used is dataset creation time
    if [ "${is_snapshot}" = "true" ]; then
        last_used="$(zfs get -pH creation "${dataset}" | awk -F '\t' '{print $3}')"
    # otherwise, last_used is manually marked at boot/shutdown on a root dataset for zsys
    else
        # if current system, take current time
        if zfs mount | awk '/[ \t]+\/$/ {print $1}' | grep -q "${dataset}"; then
            last_used=$(date +%s)
        else
            last_used=$(zfs get -H com.ubuntu.zsys:last-used "${dataset}" | awk '{print $3}')
            # case of non zsys, or zsys without annotation, take /etc/machine-id stat (as we mounted with noatime).
            # However, as systems can be relatime, if system is current mounted one, set current time (case of clone + reboot
            # within the same d).
            if [ "${last_used}" = "-" ]; then
                last_used=$(stat --printf="%X" "${mntdir}/etc/os-release")
                if [ -f "${mntdir}/etc/machine-id" ]; then
                    last_used=$(stat --printf="%X" "${mntdir}/etc/machine-id")
                fi
            fi
        fi
    fi
    is_zsys=$(zfs get -H com.ubuntu.zsys:bootfs "${base_dataset}" | awk '{print $3}')
    if [ -n "${initrd_list}" -a -n "${kernel_list}" ]; then
        echo "${dataset}\t${is_zsys}\t${machine_id}\t${pretty_name}\t${last_used}\t${initrd_device}\t${initrd_list}\t${kernel_list}\t${last_booted_kernel}"
    else
        grub_warn "didn't find any valid initrd or kernel."
    fi
    umount "${mntdir}" || true
    # We needed to look in / for snapshots on root dataset, umount the snapshot for etc before zfs lazily unmount it
    case "${etc_dir}" in /.zfs/snapshot/*/etc)
        snapshot_path="$(findmnt -n -o TARGET -T "${etc_dir}")"
        umount "${snapshot_path}" || true
        ;;
    esac
}
# Scan available boot options and returns in a formatted list
# $1 is the temporary mount directory to use
bootlist() {
    local mntdir="$1"
    local boot_list=""
    for dataset in $(get_root_datasets); do
        # get information from current root dataset
        boot_list="${boot_list}$(get_dataset_info "${dataset}" ${mntdir})\n"
        # get information from snapshots of this root dataset
        snapshots="$(zfs list -H -o name -t snapshot "${dataset}"|while read snapshot_dataset; do
            get_dataset_info "${snapshot_dataset}" ${mntdir}
        done)"
        [ -n "${snapshots}" ] && boot_list="${boot_list}${snapshots}\n"
    done
    echo "${boot_list}"
}
# Order machine ids by last_used from their main entry
get_machines_sorted() {
    local bootlist="$1"
    local machineids="$(echo "${bootlist}" | awk '{print $3}' | sort -u)"
    for machineid in ${machineids}; do
        echo "${bootlist}" | awk 'BEGIN{FS="\t"} $1 !~ /.*@.*/  {print $5, $3}' | sort -nr | grep -E "[^^]\b${machineid}\b" | head -1
    done | sort -nr | awk '{print $2}'
}
# Sort entries by last_used for a given machineid
sort_entries_for_machineid() {
    local bootlist="$1"
    local machineid="$2"
    tab="$(printf '\t')"
    echo "${bootlist}" | grep -E "[^^]\b${machineid}\b" | sort -k5,5r -k1,1 -t "${tab}"
}
# Return main entry index
get_main_entry() {
    local entries="$1"
    echo "${entries}" | awk 'BEGIN{FS="\t"} $1 !~ /.*@.*/  {print}' | head -1
}
# Return specific field at index from entry
get_field_from_entry() {
    local entry="$1"
    local index="$2"
    echo "${entry}" | awk "BEGIN{FS=\"\t\"} {print \$$index}"
}
# Get the main entry metadata
main_entry_meta() {
    local main_entry="$1"
    initrd=$(get_field_from_entry "${main_entry}" 7 | cut -d'|' -f1)
    kernel=$(get_field_from_entry "${main_entry}" 8 | cut -d'|' -f1)
    # Take first element (most recent entry) which is not a snapshot
    echo "${main_entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"main\", \$4, \$1, \$6, \"$initrd\", \"$kernel\"}"
}
# Get advanced entries metadata
advanced_entries_meta() {
    local main_entry="$1"
    last_used_kernel="$(get_field_from_entry "${main_entry}" 9 )"
    # We must align initrds with kernels.
    # Adds initrds to the stack then pop them 1 by 1 as we process the kernels
    oldIFS="$IFS"
    export IFS='|'
    set -- $(get_field_from_entry "${main_entry}" 7)
    for kernel in $(get_field_from_entry "${main_entry}" 8); do
        # get initrd and pop to the next one
        initrd="$1"; shift
        was_last_used_kernel="false"
        kernel_basename=$(basename "${kernel}")
        if [ "${kernel_basename}" = "${last_used_kernel}" ]; then
            was_last_used_kernel="true"
        fi
        echo "${main_entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"}    {print \$3, \$2, \"advanced\", \$4, \$1, \$6, \"$initrd\", \"$kernel\", \"$was_last_used_kernel\"}"
    done
    IFS="$oldIFS"
}
# Get history metadata
history_entries_meta() {
    local entries="$1"
    local main_dataset_name="$2"
    local main_dataset_releasename="$3"
    if [ -z "${entries}" ]; then
        return
    fi
    # Traverse snapshots and clones
    echo "${entries}" | while read entry; do
        name=""
        # Compute snapshot/filesystem dataset name
        snap_dataset_name="$(get_field_from_entry "${entry}" 1)"
        snapname="${snap_dataset_name##*@}"
        # If, this is a clone, take what is after main_dataset_name
        if [ "${snapname}" = "${snap_dataset_name}" ]; then
            snapname="${snap_dataset_name##${main_dataset_name}_}"
            # Handle manual user clone (not prefixed by "main_dataset_name")
            snapname="${snapname##*/}"
        fi
        # We keep the snapname only if it is not only a zsys auto snapshot
        if echo "${snapname}" | grep -q "^autozsys_"; then
            snapname=""
        fi
        # We store the release only if it different from main dataset release (snapshot before a release upgrade)
        releasename=$(get_field_from_entry "${entry}" 4)
        if [ "${releasename}" = "${main_dataset_releasename}" ]; then
            releasename=""
        fi
        # Snapshot date
        foo="$(get_field_from_entry "${entry}" 5)"
        snapdate="$(date -d @$(get_field_from_entry "${entry}" 5) "+%x @ %H:%M")"
        # For snapshots/clones the name can have the following formats:
        # 	<DATE>: autozsys, same release
        #   <OLD_RELEASE> on <DATE>: autozsys, different release
        #   <SNAPNAME> on <DATE>: Manual snapshot, same release
        #   <SNAPNAME>, <OLD_RELEASE> on <DATE>: Manual snapshot, different release
        if [ "${snapname}" = "" -a "${releasename}" = "" ]; then
            name="${snapdate}"
        elif [ "${snapname}" = "" -a "${releasename}" != "" ]; then
            name=$(gettext_printf "%s on %s" "${releasename}" "${snapdate}")
        elif [ "${snapname}" != "" -a "${releasename}" = "" ]; then
            name=$(gettext_printf "%s on %s" "${snapname}" "${snapdate}")
        else # snapname != "" && releasename != ""
            name=$(gettext_printf "%s, %s on %s" "${snapname}" "${releasename}" "${snapdate}")
        fi
        # Choose kernel and initrd if the snapshot was booted successfully on a specific kernel before
        # Take latest by default if no match
        initrd=$(get_field_from_entry "${entry}" 7 | cut -d'|' -f1)
        kernel=$(get_field_from_entry "${entry}" 8 | cut -d'|' -f1)
        last_used_kernel="$(get_field_from_entry "${entry}" 9)"
        # We must align initrds with kernels.
        # Adds initrds to the stack then pop them 1 by 1 as we process the kernels
        oldIFS="$IFS"
        export IFS='|'
        set -- $(get_field_from_entry "${entry}" 7)
        for k in $(get_field_from_entry "${entry}" 8); do
            # get initrd and pop to the next one
            candidate_initrd="$1"; shift
            kernel_basename=$(basename -- "${k}")
            if [ "${kernel_basename}" = "${last_used_kernel}" ]; then
                kernel="${k}"
                initrd="${candidate_initrd}"
                break
            fi
        done
        IFS="$oldIFS"
        echo "${entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"}    {print \$3, \$2, \"history\", \"$name\", \$1, \$6, \"$initrd\", \"$kernel\"}"
    done
}
# Generate metadata from a BOOTLIST that will subsequently used to generate
# the final grub menu entries
generate_grub_menu_metadata() {
    local bootlist="$1"
    # Sort machineids by last_used from their main entry
    for machineid in $(get_machines_sorted "${bootlist}"); do
        entries="$(sort_entries_for_machineid "${bootlist}" ${machineid})"
        main_entry="$(get_main_entry "${entries}")"
        if [ -z "$main_entry" ]; then
            continue
        fi
        main_entry_meta "${main_entry}"
        advanced_entries_meta "${main_entry}"
        main_dataset_name="$(get_field_from_entry "${main_entry}" 1)"
        main_dataset_releasename="$(get_field_from_entry "${main_entry}" 4)"
        # grep -v errcode != 0 if there is no match. || true to not fail with -e
        other_entries="$(echo "${entries}" | grep -v "${main_entry}" || true)"
        history_entries_meta "${other_entries}" "${main_dataset_name}" "${main_dataset_releasename}"
    done
}
# Print the configuration part common to all sections
# Note:
#   If 10_linux runs these part will be defined twice in grub configuration
print_menu_prologue() {
    cat << 'EOF'
function gfxmode {
	set gfxpayload="${1}"
EOF
    if [ "${vt_handoff}" = 1 ]; then
        cat << 'EOF'
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
EOF
    fi
    cat << EOF
}
EOF
    # Use ELILO's generic "efifb" when it's known to be available.
    # FIXME: We need an interface to select vesafb in case efifb can't be used.
    GRUB_GFXPAYLOAD_LINUX="${GRUB_GFXPAYLOAD_LINUX:-}"
    if [ "${GRUB_GFXPAYLOAD_LINUX}" != "" ] || [ "${gfxpayload_dynamic}" = 0 ]; then
        echo "set linux_gfx_mode=${GRUB_GFXPAYLOAD_LINUX}"
    else
        cat << EOF
if [ "\${recordfail}" != 1 ]; then
  if [ -e \${prefix}/gfxblacklist.txt ]; then
    if hwmatch \${prefix}/gfxblacklist.txt 3; then
      if [ \${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
EOF
    fi
    cat << EOF
export linux_gfx_mode
EOF
}
# Cache for prepare_grub_to_access_device call
# $1: boot_device
# $2: submenu_level
prepare_grub_to_access_device_cached() {
    local boot_device="$1"
    local submenu_level="$2"
    local boot_device_idx="$(echo ${boot_device} | tr '/' '_')"
    cache_file="${ZFSTMP}/$(echo boot_device${boot_device_idx})"
    if [ ! -f "${cache_file}" ]; then
        set +u
        echo "$(prepare_grub_to_access_device "${boot_device}")" > "${cache_file}"
        set -u
        for i in 0 1 2; do
            submenu_indentation="$(printf %${i}s | tr " " "${grub_tab}")"
            sed "s/^/${submenu_indentation}	/" "${cache_file}" > "${cache_file}--${i}"
        done
    fi
    cat "${cache_file}--${submenu_level}"
}
# Print a grub menu entry
zfs_linux_entry () {
    submenu_level="$1"
    title="$2"
    type="$3"
    dataset="$4"
    boot_device="$5"
    initrd="$6"
    kernel="$7"
    kernel_version="$8"
    kernel_additional_args="${9:-}"
    boot_devices="${10:-}"
    submenu_indentation="$(printf %${submenu_level}s | tr " " "${grub_tab}")"
    echo "${submenu_indentation}menuentry '$(echo "${title}" | grub_quote)' ${CLASS} \${menuentry_id_option} 'gnulinux-${dataset}-${kernel_version}' {"
    if [ "${quick_boot}" = 1 ]; then
        echo "${submenu_indentation}	recordfail"
    fi
    if [ "${type}" != "recovery" ] ; then
        GRUB_SAVEDEFAULT=${GRUB_SAVEDEFAULT:-}
        default_entry="$(save_default_entry)"
        if [ -n "${default_entry}" ]; then
            echo "${submenu_indentation}	${default_entry}"
        fi
    fi
    # Use ELILO's generic "efifb" when it's known to be available.
    # FIXME: We need an interface to select vesafb in case efifb can't be used.
    if [ "${GRUB_GFXPAYLOAD_LINUX}" = "" ]; then
        echo "${submenu_indentation}	load_video"
    else
        if [ "${GRUB_GFXPAYLOAD_LINUX}" != "text" ]; then
            echo "${submenu_indentation}	load_video"
        fi
    fi
    if ([ "${ubuntu_recovery}" = 0 ] || [ "${type}" != "recovery" ]) && \
        ([ "${GRUB_GFXPAYLOAD_LINUX}" != "" ] || [ "${gfxpayload_dynamic}" = 1 ]); then
        echo "${submenu_indentation}	gfxmode \${linux_gfx_mode}"
    fi
    echo "${submenu_indentation}	insmod gzio"
    echo "${submenu_indentation}	if [ \"\${grub_platform}\" = xen ]; then insmod xzio; insmod lzopio; fi"
    if [ -n "$boot_devices" ]; then
        for device in ${boot_devices}; do
            echo "${submenu_indentation}	if [ "${boot_device}" = "${device}" ]; then"
            echo "$(prepare_grub_to_access_device_cached "${device}" $(( submenu_level +1 )) )"
            echo "${submenu_indentation}	fi"
        done
    else
        echo "$(prepare_grub_to_access_device_cached "${boot_device}" "${submenu_level}")"
    fi
    if [ "${quiet_boot}" = 0 ] || [ "${type}" != simple ]; then
        echo "${submenu_indentation}	echo $(gettext_printf "Loading Linux %s ..." ${kernel_version} | grub_quote)"
    fi
    linux_default_args="${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
    if [ ${type} = "recovery" ]; then
        linux_default_args="${GRUB_CMDLINE_LINUX_RECOVERY} ${GRUB_CMDLINE_LINUX}"
    fi
    # echo in echo trims end of line spaces
    echo "${submenu_indentation}	linux	\"${kernel}\" root=ZFS=\"${dataset}\" ro $(echo ${linux_default_args} ${kernel_additional_args})"
    if [ "${quiet_boot}" = 0 ] || [ "${type}" != simple ]; then
        echo "${submenu_indentation}	echo '$(gettext_printf "Loading initial ramdisk ..." | grub_quote)'"
    fi
    echo "${submenu_indentation}	initrd	\"${initrd}\""
    echo "${submenu_indentation}}"
}
# Generate a GRUB Menu from menu meta data
# $1 menu metadata
generate_grub_menu() {
    local menu_metadata="$1"
    local last_section=""
    local main_dataset_name=""
    local main_dataset=""
    local have_zsys=""
    if [ -z "${menu_metadata}" ]; then
        return
    fi
    CLASS="--class gnu-linux --class gnu --class os"
    if [ "${GRUB_DISTRIBUTOR}" = "" ] ; then
        OS=GNU/Linux
    else
        case ${GRUB_DISTRIBUTOR} in
            Ubuntu|Kubuntu)
            OS="${GRUB_DISTRIBUTOR}"
            ;;
            *)
            OS="${GRUB_DISTRIBUTOR} GNU/Linux"
            ;;
        esac
        CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1 | LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
    fi
    if [ -x /lib/recovery-mode/recovery-menu ]; then
        GRUB_CMDLINE_LINUX_RECOVERY=recovery
    else
        GRUB_CMDLINE_LINUX_RECOVERY=single
    fi
    if [ "${ubuntu_recovery}" = 1 ]; then
        GRUB_CMDLINE_LINUX_RECOVERY="${GRUB_CMDLINE_LINUX_RECOVERY} nomodeset"
    fi
    case "$GENKERNEL_ARCH" in
        x86*) GRUB_CMDLINE_LINUX_RECOVERY="$GRUB_CMDLINE_LINUX_RECOVERY dis_ucode_ldr";;
    esac
    if [ "${vt_handoff}" = 1 ]; then
        for word in ${GRUB_CMDLINE_LINUX_DEFAULT}; do
            if [ "${word}" = splash ]; then
                GRUB_CMDLINE_LINUX_DEFAULT="${GRUB_CMDLINE_LINUX_DEFAULT} \${vt_handoff}"
            fi
        done
    fi
    print_menu_prologue
    cat<<'EOF'
function zsyshistorymenu {
	# $1: root dataset (eg rpool/ROOT/ubuntu_2zhm07@autozsys_k56fr6)
	# $2: boot device id (eg 411f29ce1557bfed)
	# $3: initrd (eg /BOOT/ubuntu_2zhm07@autozsys_k56fr6/initrd.img-5.4.0-21-generic)
	# $4: kernel (eg /BOOT/ubuntu_2zhm07@autozsys_k56fr6/vmlinuz-5.4.0-21-generic)
	# $5: kernel_version (eg 5.4.0-21-generic)
	set root_dataset="${1}"
	set boot_device="${2}"
	set initrd="${3}"
	set kernel="${4}"
	set kversion="${5}"
EOF
    boot_devices=$(echo "${menu_metadata}" | cut -d"$(printf '\t')" -f6 | sort -u)
    title=$(gettext_printf "Revert system only")
    zfs_linux_entry 1 "${title}" "simple" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' '' "${boot_devices}"
    title="$(gettext_printf "Revert system and user data")"
    zfs_linux_entry 1 "${title}" "simple" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' 'zsys-revert=userdata' "${boot_devices}"
    GRUB_DISABLE_RECOVERY="${GRUB_DISABLE_RECOVERY:-}"
    if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
        title="$(gettext_printf "Revert system only (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
        zfs_linux_entry 1 "${title}" "recovery" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' '' "${boot_devices}"
        title="$(gettext_printf "Revert system and user data (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
        zfs_linux_entry 1 "${title}" "recovery" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' 'zsys-revert=userdata' "${boot_devices}"
    fi
echo "}"
echo
    # IFS is set to TAB (ASCII 0x09)
    echo "${menu_metadata}" |
    {
        at_least_one_entry=0
        have_zsys="$(which zsysd || true)"
        while IFS="$(printf '\t')" read -r machineid iszsys section name dataset device initrd kernel opt; do
            # Disable history for non zsys system or if systems is a zsys one and zsys isn't installed.
            # In pure zfs systems, we identified multiple issues due to the mount generator
            # in upstream zfs which makes it incompatible. Don't show history for now.
            if [ "${section}" = "history" ]; then
                if [ "${iszsys}" != "yes" ] || [ "${iszsys}" = "yes" -a -z "${have_zsys}" ]; then
                    continue
                fi
            fi
            if [ "${last_section}" != "${section}" -a -n "${last_section}" ]; then
                # Close previous section wrapper
                if [ "${last_section}" != "main" ]; then
                    echo "}"    # Add grub_tabs
                    at_least_one_entry=0
                fi
            fi
            case "${section}" in
                main)
                    title="${name}"
                    main_dataset_name="${name}"
                    main_dataset="${dataset}"
                    kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
                    zfs_linux_entry 0 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
                    at_least_one_entry=1
                ;;
                advanced)
                    # normal and recovery entries for a given kernel
                    if [ "${last_section}" != "${section}" ]; then
                        echo "submenu '$(gettext_printf "Advanced options for %s" "${main_dataset_name}" | grub_quote)' \${menuentry_id_option} 'gnulinux-advanced-${main_dataset}' {"
                    fi
                    last_booted_kernel_marker=""
                    if [ "${opt}" = "true" ]; then
                        last_booted_kernel_marker="* "
                    fi
                    kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
                    title="$(gettext_printf "%s%s, with Linux %s" "${last_booted_kernel_marker}" "${name}" "${kernel_version}")"
                    zfs_linux_entry 1 "${title}" "advanced" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
                    GRUB_DISABLE_RECOVERY=${GRUB_DISABLE_RECOVERY:-}
                    if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
                        title="$(gettext_printf "%s%s, with Linux %s (%s)" "${last_booted_kernel_marker}" "${name}" "${kernel_version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
                        zfs_linux_entry 1 "${title}" "recovery" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
                    fi
                    at_least_one_entry=1
                ;;
                history)
                    # Revert to a snapshot
                    # revert system, revert system and user data and associated recovery entries
                    if [ "${last_section}" != "${section}" ]; then
                        echo "submenu '$(gettext_printf "History for %s" "${main_dataset_name}" | grub_quote)' \${menuentry_id_option} 'gnulinux-history-${main_dataset}' {"
                    fi
                    if [ "${iszsys}" = "yes" ]; then
                        title="$(gettext_printf "Revert to %s" "${name}" | grub_quote)"
                    else
                        title="$(gettext_printf "Boot on %s" "${name}" | grub_quote)"
                    fi
                    echo "	submenu '${title}' \${menuentry_id_option} 'gnulinux-history-${dataset}' {"
                    kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
                    # Zsys only: let revert system without destroying snapshots
                    if [ "${iszsys}" = "yes" ]; then
                        echo "${grub_tab}${grub_tab}zsyshistorymenu" \"${dataset}\" \"${device}\" \"${initrd}\" \"${kernel}\" \"${kernel_version}\"
                    # Non-zsys: boot temporarly on snapshots or rollback (destroying intermediate snapshots)
                    else
                        title="$(gettext_printf "One time boot")"
                        zfs_linux_entry 2 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
                        GRUB_DISABLE_RECOVERY="${GRUB_DISABLE_RECOVERY:-}"
                        if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
                            title="$(gettext_printf "One time boot (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
                            zfs_linux_entry 2 "${title}" "recovery" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
                        fi
                        title="$(gettext_printf "Revert system (all intermediate snapshots will be destroyed)")"
                        zfs_linux_entry 2 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}" "rollback=yes"
                    fi
                    echo "	}"
                    at_least_one_entry=1
                ;;
                *)
                    grub_warn "unknown section: ${section}. Ignoring entry ${name} for ${dataset}"
                ;;
            esac
            last_section="${section}"
        done
        if [ "${at_least_one_entry}" -eq 1 ]; then
            echo "}"
        fi
    }
}
# don't add trailing newline of variable is empty
# $1: content to write
# $2: destination file
trailing_newline_if_not_empty() {
    content="$1"
    dest="$2"
    if [ -z "${content}" ]; then
        rm -f "${dest}"
        touch "${dest}"
        return
    fi
    echo "${content}" > "${dest}"
}
GRUB_LINUX_ZFS_TEST="${GRUB_LINUX_ZFS_TEST:-}"
case "${GRUB_LINUX_ZFS_TEST}" in
    bootlist)
        # Import all available pools on the system and return imported list
        imported_pools=$(import_pools)
        boot_list="$(bootlist ${MNTDIR})"
        trailing_newline_if_not_empty "${boot_list}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
        break
    ;;
    metamenu)
        boot_list="$(cat ${GRUB_LINUX_ZFS_TEST_INPUT})"
        menu_metadata="$(generate_grub_menu_metadata "${boot_list}")"
        trailing_newline_if_not_empty "${menu_metadata}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
        break
    ;;
    grubmenu)
        menu_metadata="$(cat ${GRUB_LINUX_ZFS_TEST_INPUT})"
        grub_menu=$(generate_grub_menu "${menu_metadata}")
        trailing_newline_if_not_empty "${grub_menu}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
        break
    ;;
    *)
        # Import all available pools on the system and return imported list
        imported_pools=$(import_pools)
        # Generate the complete list of boot entries
        boot_list="$(bootlist ${MNTDIR})"
        # Create boot menu meta data from the list of boot entries
        menu_metadata="$(generate_grub_menu_metadata "${boot_list}")"
        # Create boot menu meta data from the list of boot entries
        grub_menu="$(generate_grub_menu "${menu_metadata}")"
        if [ -n "${grub_menu}" ]; then
            # We want the trailing newline as a marker will be added
            echo "${grub_menu}"
        fi
    ;;
esac

====================== sda12/etc/grub.d/31_uefi-firmware =======================

#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2012  Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
. "${datarootdir}/grub/grub-mkconfig_lib"
efi_vars_dir=/sys/firmware/efi/vars
EFI_GLOBAL_VARIABLE=8be4df61-93ca-11d2-aa0d-00e098032b8c
OsIndications="$efi_vars_dir/OsIndicationsSupported-$EFI_GLOBAL_VARIABLE/data"
if [ -e "$OsIndications" ] && \
   [ "$(( $(printf 0x%x \'"$(cat $OsIndications | cut -b1)") & 1 ))" = 1 ]; then
  LABEL="UEFI Firmware Settings"
  gettext_printf "Adding boot menu entry for UEFI Firmware Settings\n" >&2
  onstr="$(gettext_printf "(on %s)" "${DEVICE}")"
  cat << EOF
menuentry '$LABEL' \$menuentry_id_option 'uefi-firmware' {
	fwsetup
}
EOF
fi

======================= sda12/etc/grub.d/40_custom_proxy =======================

#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/custom' | /etc/grub.d/bin/grubcfg_proxy "+*
+#text
-'Kubuntu 21.04 [GPT9] (on /dev/sda9)'~48915c75b3d6bc7793b77eadd90876d5~
"


======================== Unknown MBRs/Boot Sectors/etc =========================

Unknown BootLoader on sda10

00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 f0 5f 1a  |........?....._.|
00000020  00 00 00 00 80 00 80 00  ff ff 94 00 00 00 00 00  |................|
00000030  04 00 00 00 00 00 00 00  ff 4f 09 00 00 00 00 00  |.........O......|
00000040  f6 00 00 00 01 00 00 00  2e ac d9 03 e6 7b 5d 53  |.............{]S|
00000050  00 00 00 00 0e 1f be 71  7c ac 22 c0 74 0b 56 b4  |.......q|.".t.V.|
00000060  0e bb 07 00 cd 10 5e eb  f0 32 e4 cd 16 cd 19 eb  |......^..2......|
00000070  fe 54 68 69 73 20 69 73  20 6e 6f 74 20 61 20 62  |.This is not a b|
00000080  6f 6f 74 61 62 6c 65 20  64 69 73 6b 2e 20 50 6c  |ootable disk. Pl|
00000090  65 61 73 65 20 69 6e 73  65 72 74 20 61 20 62 6f  |ease insert a bo|
000000a0  6f 74 61 62 6c 65 20 66  6c 6f 70 70 79 20 61 6e  |otable floppy an|
000000b0  64 0d 0a 70 72 65 73 73  20 61 6e 79 20 6b 65 79  |d..press any key|
000000c0  20 74 6f 20 74 72 79 20  61 67 61 69 6e 20 2e 2e  | to try again ..|
000000d0  2e 20 0d 0a 00 00 00 00  00 00 00 00 00 00 00 00  |. ..............|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


=============================== StdErr Messages ================================

File descriptor 63 (pipe:[77176]) leaked on lvs invocation. Parent PID 5902: /bin/bash

Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would purge (in order to sign-grub) and reinstall the grub-efi-amd64-signed of
sda8,
using the following options:        sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s win-legacy-basic-fix use-standard-efi-file    

Final advice in case of suggested repair: ______________________________________


Please do not forget to make your UEFI firmware boot on the L'OS actuellement utilisé - KDE neon User - Plasma 25th Anniversary Edition CurrentSession entry (sda2/efi/****/shim****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.

If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\shim****.efi (**** will be updated in the final message)

Kubuntu user qui aimerait passer définitivement au bureau standard.

Hors ligne