Contenu | Rechercher | Menus

Annonce

DVD, clés USB et t-shirts Ubuntu-fr disponibles sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 24/10/2021, à 13:31

yayou

Ports USB défectueux

Bonjour à tous,

Depuis maintenant des mois j'ai de gros soucis avec mes ports USB. Mon laptop possède 1 port 3.0 et 3 ports 2.0. Ma vieille souris optique (2.0) ne fonctionne passablement que lorsque je la branche sur le port 3.0. Sur les autres c'est vraiment de la chance. Et même sur le port 3.0, de temps à autre, elle cesse de fonctionner. A ce moment là il faut soit que je la fasse glisser frénétiquement sur le tapis pendant parfois 10s, soit que je la déconnecte et la reconnecte. Ce qui me fait penser que c'est un soucis avec les ports USB c'est que:

- J'ai les mêmes soucis sous kubuntu et Windows 10;

- C'est pareil avec une autre souris que m'a prêté une connaissance. Elle est un peu mal fichue mais elle fonctionnait chez lui;

- Mes Hdd externes USB 2.0 buguent souvent quand je les branche sur un des ports 2.0. Une fois sur le 3.0, ils marchent direct.

Comme vous le savez cela peut abimer mon matériel alors je suis à la recherche d'une solution. Auriez-vous déjà eu ce genre de soucis?

Merci de m'avoir lu.

Hors ligne

#2 Le 24/10/2021, à 15:54

ares

Re : Ports USB défectueux

Bonjour,

Peux-tu préciser la marque et la référence de ton "laptop".
Il existe des "bombes" de nettoyage ou spécial contact, tu as essayé ?

@+

Hors ligne

#3 Le 24/10/2021, à 16:01

yayou

Re : Ports USB défectueux

Merci de ta réactivité, ares. Mon laptop est un Asus G74SX-TY032V. Le 11 Novembre prochain ça fera 10 ans que je l'ai.
Il y a quelque mois j'ai soufflé de l'air frais pour dépoussiéré et j'ai nettoyé tous les ports avec de l'alcool à 90°. J'avais utilisé une bombe mais ça remonte à quelques années.

Hors ligne

#4 Le 24/10/2021, à 16:20

hotnuma

Re : Ports USB défectueux

Un truc comme ça pour les contacts :

Contact KF F2


Xubuntu 21.04 - GitHub

Hors ligne

#5 Le 24/10/2021, à 16:29

yayou

Re : Ports USB défectueux

Je n'ai pas essayé celui là précisément. J'ai pris ce que j'ai trouvé dans en magasin. Je vais le chercher mais je n'ai pas beaucoup d'espoir de le trouver ici. Je croise les doigts. En tout cas, merci hotnuma.

Hors ligne

#6 Le 24/10/2021, à 17:04

ares

Re : Ports USB défectueux

À tout hasard...
Que renvoient les commande suivante :

sudo dmesg
lsub
lspci

Et je suppose que le BIOS est à jour.

Si c'est matériel, est ce que tu as l'impression qu'un des connecteurs USB est « flottant » ou « bouge »...

@+

Hors ligne

#7 Le 01/11/2021, à 14:42

yayou

Re : Ports USB défectueux

Vraiment désolé pour ce silence mais je suis confronté à ce cas très dérangeant où la technologie fini par atteindre le paranormal. Je voulais vous fournir les résultats des commandes proposées par ares mais je voulais le faire pour le cas où la souris est sur le port USB 3.0 qui fonctionne assez bien ainsi que lorsqu'elle est sur les ports 2.0 où ça ne fonctionne quasiment plus, sinon après une belle bagarre (et c'est ainsi depuis 1 an voir plus). J'ai donc mis la souris sur le port 3.0, j'ai enregistrer les résultats et quand j'ai mis la souris sur l'un des ports 2.0... elle fonctionnait aussi. Ce ne plantait plus. J'ai essayé tous les ports 2.0, ça ne plante quasiment plus sinon brièvement. Sur Windows 10 j'ai encore un peu les mêmes soucis mais sur Kubuntu, des heures durant, tous les ports fonctionnent.

Du coup là je n'ai que les résultats pour le port 3.0.
dmesg

[    0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
[    0.000000] Linux version 5.4.0-89-generic (buildd@lgw01-amd64-044) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #100-Ubuntu SMP Fri Sep 24 14:50:10 UTC 2021 (Ubuntu 5.4.0-89.100-generic 5.4.143)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-89-generic root=UUID=a07a6274-f7d5-44bb-b9e1-c7483741830a ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002004ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020050000-0x000000002024ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020250000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000df40efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df40f000-0x00000000df58dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df58e000-0x00000000df596fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df597000-0x00000000df597fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df598000-0x00000000df598fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df599000-0x00000000df5b7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df5b8000-0x00000000df5c7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df5c8000-0x00000000df5e7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df5e8000-0x00000000df72afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df72b000-0x00000000df788fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df789000-0x00000000df794fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df795000-0x00000000df7e7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df7e8000-0x00000000df7fcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df7fd000-0x00000000df7fffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df800000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: ASUSTeK Computer Inc. G74Sx/G74Sx, BIOS G74Sx.201 04/27/2011
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x21f800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 100000000 mask F00000000 write-back
[    0.000000]   4 base 200000000 mask FE0000000 write-back
[    0.000000]   5 base 21F800000 mask FFF800000 uncachable
[    0.000000]   6 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] last_pfn = 0xdf7fd max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc70-0x000fcc7f]
[    0.000000] check: Scanning 1 areas for low memory corruption
[    0.000000] RAMDISK: [mem 0x2e1cd000-0x330ddfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0430 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000DF7FEE18 000074 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
[    0.000000] ACPI: FACP 0x00000000DF79AD98 0000F4 (v04 _ASUS_ Notebook 06222004 MSFT 00010013)
[    0.000000] ACPI: DSDT 0x00000000DF76B018 0109D3 (v01 _ASUS_ Notebook 00000000 INTL 20091112)
[    0.000000] ACPI: FACS 0x00000000DF7E4E40 000040
[    0.000000] ACPI: FACS 0x00000000DF7E4D40 000040
[    0.000000] ACPI: APIC 0x00000000DF7FDF18 0000CC (v02 _ASUS_ Notebook 06222004 MSFT 00010013)
[    0.000000] ACPI: DBGP 0x00000000DF7FFF18 000034 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
[    0.000000] ACPI: ECDT 0x00000000DF7E4B18 0000C1 (v01 _ASUS_ Notebook 06222004 AMI. 00000003)
[    0.000000] ACPI: SLIC 0x00000000DF79BE18 000176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
[    0.000000] ACPI: HPET 0x00000000DF7E5D18 000038 (v01 _ASUS_ Notebook 06222004 AMI. 00000003)
[    0.000000] ACPI: MCFG 0x00000000DF7E5C98 00003C (v01 _ASUS_ Notebook 06222004 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000DF788018 000913 (v01 PmRef  Cpu0Ist  00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DF787018 000996 (v01 PmRef  CpuPm    00003000 INTL 20091112)
[    0.000000] ACPI: ASF! 0x00000000DF7E4A18 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: Reserving FACP table memory at [mem 0xdf79ad98-0xdf79ae8b]
[    0.000000] ACPI: Reserving DSDT table memory at [mem 0xdf76b018-0xdf77b9ea]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xdf7e4e40-0xdf7e4e7f]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xdf7e4d40-0xdf7e4d7f]
[    0.000000] ACPI: Reserving APIC table memory at [mem 0xdf7fdf18-0xdf7fdfe3]
[    0.000000] ACPI: Reserving DBGP table memory at [mem 0xdf7fff18-0xdf7fff4b]
[    0.000000] ACPI: Reserving ECDT table memory at [mem 0xdf7e4b18-0xdf7e4bd8]
[    0.000000] ACPI: Reserving SLIC table memory at [mem 0xdf79be18-0xdf79bf8d]
[    0.000000] ACPI: Reserving HPET table memory at [mem 0xdf7e5d18-0xdf7e5d4f]
[    0.000000] ACPI: Reserving MCFG table memory at [mem 0xdf7e5c98-0xdf7e5cd3]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xdf788018-0xdf78892a]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xdf787018-0xdf7879ad]
[    0.000000] ACPI: Reserving ASF! table memory at [mem 0xdf7e4a18-0xdf7e4ab7]
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21f7d1000-0x21f7fbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021f7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000002004ffff]
[    0.000000]   node   0: [mem 0x0000000020250000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000df40efff]
[    0.000000]   node   0: [mem 0x00000000df58e000-0x00000000df596fff]
[    0.000000]   node   0: [mem 0x00000000df598000-0x00000000df598fff]
[    0.000000]   node   0: [mem 0x00000000df5b8000-0x00000000df5c7fff]
[    0.000000]   node   0: [mem 0x00000000df5e8000-0x00000000df72afff]
[    0.000000]   node   0: [mem 0x00000000df789000-0x00000000df794fff]
[    0.000000]   node   0: [mem 0x00000000df7e8000-0x00000000df7fcfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021f7fffff]
[    0.000000] Zeroed struct page in unavailable ranges: 5846 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f7fffff]
[    0.000000] On node 0 totalpages: 2091306
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14215 pages used for memmap
[    0.000000]   DMA32 zone: 909709 pages, LIFO batch:63
[    0.000000]   Normal zone: 18400 pages used for memmap
[    0.000000]   Normal zone: 1177600 pages, LIFO batch:63
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] TSC deadline timer available
[    0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20050000-0x2024ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf40f000-0xdf58dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf597000-0xdf597fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf599000-0xdf5b7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf5c8000-0xdf5e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf72b000-0xdf788fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf795000-0xdf7e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf7fd000-0xdf7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2058606
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-89-generic root=UUID=a07a6274-f7d5-44bb-b9e1-c7483741830a ro quiet splash vt.handoff=7
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8038308K/8365224K available (14339K kernel code, 2400K rwdata, 5016K rodata, 2728K init, 4972K bss, 326916K reserved, 0K cma-reserved)
[    0.000000] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 44619 entries in 175 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] printk: console [tty0] enabled
[    0.000000] ACPI: Core revision 20190816
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] Switched APIC routing to physical flat.
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.028000] tsc: PIT calibration matches HPET. 2 loops
[    0.028000] tsc: Detected 1995.464 MHz processor
[    0.000004] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3986e2b02ab, max_idle_ns: 881590480673 ns
[    0.000008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.92 BogoMIPS (lpj=7981856)
[    0.000010] pid_max: default: 32768 minimum: 301
[    0.000059] LSM: Security Framework initializing
[    0.000073] Yama: becoming mindful.
[    0.000151] AppArmor: AppArmor initialized
[    0.000211] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000226] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000245] *** VALIDATE tmpfs ***
[    0.000448] *** VALIDATE proc ***
[    0.000519] *** VALIDATE cgroup1 ***
[    0.000520] *** VALIDATE cgroup2 ***
[    0.000579] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.000595] process: using mwait in idle threads
[    0.000599] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.000600] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.000603] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.000605] Spectre V2 : Mitigation: Full generic retpoline
[    0.000605] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.000606] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.000608] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.000608] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.000610] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.000614] MDS: Mitigation: Clear CPU buffers
[    0.000806] Freeing SMP alternatives memory: 40K
[    0.004116] smpboot: CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.004238] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.004246] ... version:                3
[    0.004246] ... bit width:              48
[    0.004247] ... generic registers:      4
[    0.004248] ... value mask:             0000ffffffffffff
[    0.004249] ... max period:             00007fffffffffff
[    0.004249] ... fixed-purpose events:   3
[    0.004250] ... event mask:             000000070000000f
[    0.004296] rcu: Hierarchical SRCU implementation.
[    0.005961] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.006144] smp: Bringing up secondary CPUs ...
[    0.006274] x86: Booting SMP configuration:
[    0.006276] .... node  #0, CPUs:        #1  #2  #3  #4
[    0.018690] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.018690]   #5  #6  #7
[    0.024077] smp: Brought up 1 node, 8 CPUs
[    0.024077] smpboot: Max logical packages: 2
[    0.024077] smpboot: Total of 8 processors activated (31927.42 BogoMIPS)
[    0.028451] devtmpfs: initialized
[    0.028451] x86/mm: Memory block size: 128MB
[    0.029101] PM: Registering ACPI NVS region [mem 0xdf72b000-0xdf788fff] (385024 bytes)
[    0.029101] PM: Registering ACPI NVS region [mem 0xdf795000-0xdf7e7fff] (339968 bytes)
[    0.029101] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.029101] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.029101] pinctrl core: initialized pinctrl subsystem
[    0.029101] PM: RTC time: 12:19:26, date: 2021-10-26
[    0.029101] NET: Registered protocol family 16
[    0.029101] audit: initializing netlink subsys (disabled)
[    0.029101] audit: type=2000 audit(1635250766.056:1): state=initialized audit_enabled=0 res=1
[    0.029101] EISA bus registered
[    0.029101] cpuidle: using governor ladder
[    0.029101] cpuidle: using governor menu
[    0.029101] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.029101] ACPI: bus type PCI registered
[    0.029101] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.029101] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.029101] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.029101] PCI: Using configuration type 1 for base access
[    0.029101] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.029101] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.029101] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.029101] mtrr: probably your BIOS does not setup all CPUs.
[    0.029101] mtrr: corrected configuration.
[    0.033454] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.033454] ACPI: Added _OSI(Module Device)
[    0.033454] ACPI: Added _OSI(Processor Device)
[    0.033454] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.033454] ACPI: Added _OSI(Processor Aggregator Device)
[    0.033454] ACPI: Added _OSI(Linux-Dell-Video)
[    0.033454] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.033454] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.052529] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.053662] ACPI: EC: EC started
[    0.053663] ACPI: EC: interrupt blocked
[    0.055150] ACPI: \: Used as first EC
[    0.055153] ACPI: \: GPE=0x1b, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.055153] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.056223] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.060808] ACPI: Dynamic OEM Table Load:
[    0.060816] ACPI: SSDT 0xFFFF9920554AF000 00063C (v01 PmRef  Cpu0Cst  00003001 INTL 20091112)
[    0.062479] ACPI: Dynamic OEM Table Load:
[    0.062484] ACPI: SSDT 0xFFFF9920554B2800 000303 (v01 PmRef  ApIst    00003000 INTL 20091112)
[    0.063808] ACPI: Dynamic OEM Table Load:
[    0.063813] ACPI: SSDT 0xFFFF992055534000 000119 (v01 PmRef  ApCst    00003000 INTL 20091112)
[    0.067630] ACPI: Interpreter enabled
[    0.067668] ACPI: (supports S0 S3 S4 S5)
[    0.067669] ACPI: Using IOAPIC for interrupt routing
[    0.067715] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.068113] ACPI: Enabled 12 GPEs in block 00 to 3F
[    0.083784] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.083792] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.084251] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.084693] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.084694] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.085564] PCI host bridge to bus 0000:00
[    0.085566] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.085568] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.085570] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.085571] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.085572] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.085574] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.085575] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.085576] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.085578] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.085579] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.085580] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.085582] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.085594] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.085739] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.085788] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.085968] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.085998] pci 0000:00:16.0: reg 0x10: [mem 0xf6a0b000-0xf6a0b00f 64bit]
[    0.086085] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.086223] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.086249] pci 0000:00:1a.0: reg 0x10: [mem 0xf6a08000-0xf6a083ff]
[    0.086346] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.086493] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.086523] pci 0000:00:1b.0: reg 0x10: [mem 0xf6a00000-0xf6a03fff 64bit]
[    0.086630] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.086776] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.086897] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.087055] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.087175] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.087335] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.087454] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.087614] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.087733] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.087893] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.087919] pci 0000:00:1d.0: reg 0x10: [mem 0xf6a07000-0xf6a073ff]
[    0.088019] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.088170] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.088447] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.088472] pci 0000:00:1f.2: reg 0x10: [io  0xe070-0xe077]
[    0.088483] pci 0000:00:1f.2: reg 0x14: [io  0xe060-0xe063]
[    0.088493] pci 0000:00:1f.2: reg 0x18: [io  0xe050-0xe057]
[    0.088504] pci 0000:00:1f.2: reg 0x1c: [io  0xe040-0xe043]
[    0.088514] pci 0000:00:1f.2: reg 0x20: [io  0xe020-0xe03f]
[    0.088525] pci 0000:00:1f.2: reg 0x24: [mem 0xf6a06000-0xf6a067ff]
[    0.088585] pci 0000:00:1f.2: PME# supported from D3hot
[    0.088726] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.088752] pci 0000:00:1f.3: reg 0x10: [mem 0xf6a05000-0xf6a050ff 64bit]
[    0.088779] pci 0000:00:1f.3: reg 0x20: [io  0xe000-0xe01f]
[    0.088983] pci 0000:01:00.0: [10de:1251] type 00 class 0x030000
[    0.088997] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf3ffffff]
[    0.089006] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
[    0.089014] pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xebffffff 64bit pref]
[    0.089020] pci 0000:01:00.0: reg 0x24: [io  0xd000-0xd07f]
[    0.089026] pci 0000:01:00.0: reg 0x30: [mem 0xf4000000-0xf407ffff pref]
[    0.089031] pci 0000:01:00.0: enabling Extended Tags
[    0.089175] pci 0000:01:00.1: [10de:0bee] type 00 class 0x040300
[    0.089187] pci 0000:01:00.1: reg 0x10: [mem 0xf4080000-0xf4083fff]
[    0.089218] pci 0000:01:00.1: enabling Extended Tags
[    0.089305] pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring
[    0.100055] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.100062] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.100068] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf40fffff]
[    0.100075] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xebffffff 64bit pref]
[    0.100164] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.100168] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    0.100173] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf69fffff]
[    0.100179] pci 0000:00:1c.0:   bridge window [mem 0xee200000-0xeebfffff 64bit pref]
[    0.100289] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[    0.100348] pci 0000:03:00.0: reg 0x10: [mem 0xf5600000-0xf560ffff 64bit]
[    0.100569] pci 0000:03:00.0: supports D1
[    0.100571] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.100767] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.100772] pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
[    0.100776] pci 0000:00:1c.1:   bridge window [mem 0xf5600000-0xf5ffffff]
[    0.100783] pci 0000:00:1c.1:   bridge window [mem 0xed700000-0xee0fffff 64bit pref]
[    0.100890] pci 0000:04:00.0: [1b73:1000] type 00 class 0x0c0330
[    0.100933] pci 0000:04:00.0: reg 0x10: [mem 0xf4c00000-0xf4c0ffff]
[    0.101140] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.101284] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.101288] pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
[    0.101293] pci 0000:00:1c.3:   bridge window [mem 0xf4c00000-0xf55fffff]
[    0.101299] pci 0000:00:1c.3:   bridge window [mem 0xecc00000-0xed5fffff 64bit pref]
[    0.101452] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    0.101579] pci 0000:05:00.0: reg 0x10: [io  0x9000-0x90ff]
[    0.101700] pci 0000:05:00.0: reg 0x18: [mem 0xec104000-0xec104fff 64bit pref]
[    0.101775] pci 0000:05:00.0: reg 0x20: [mem 0xec100000-0xec103fff 64bit pref]
[    0.102215] pci 0000:05:00.0: supports D1 D2
[    0.102216] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.102603] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.102608] pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
[    0.102612] pci 0000:00:1c.5:   bridge window [mem 0xf4200000-0xf4bfffff]
[    0.102619] pci 0000:00:1c.5:   bridge window [mem 0xec100000-0xecafffff 64bit pref]
[    0.103488] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[    0.103599] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)
[    0.103705] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[    0.103811] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
[    0.103916] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.104028] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.104136] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[    0.104244] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
[    0.104561] ACPI: EC: interrupt unblocked
[    0.104562] ACPI: EC: event unblocked
[    0.104571] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1b, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.104573] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
[    0.104671] iommu: Default domain type: Translated 
[    0.104671] SCSI subsystem initialized
[    0.104671] libata version 3.00 loaded.
[    0.104671] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.104671] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.104671] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.104671] vgaarb: loaded
[    0.104671] ACPI: bus type USB registered
[    0.104671] usbcore: registered new interface driver usbfs
[    0.104671] usbcore: registered new interface driver hub
[    0.104671] usbcore: registered new device driver usb
[    0.104671] pps_core: LinuxPPS API ver. 1 registered
[    0.104671] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.104671] PTP clock support registered
[    0.104671] EDAC MC: Ver: 3.0.0
[    0.104671] PCI: Using ACPI for IRQ routing
[    0.106168] PCI: pci_cache_line_size set to 64 bytes
[    0.106242] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.106244] e820: reserve RAM buffer [mem 0x20050000-0x23ffffff]
[    0.106245] e820: reserve RAM buffer [mem 0xdf40f000-0xdfffffff]
[    0.106247] e820: reserve RAM buffer [mem 0xdf597000-0xdfffffff]
[    0.106249] e820: reserve RAM buffer [mem 0xdf599000-0xdfffffff]
[    0.106250] e820: reserve RAM buffer [mem 0xdf5c8000-0xdfffffff]
[    0.106252] e820: reserve RAM buffer [mem 0xdf72b000-0xdfffffff]
[    0.106254] e820: reserve RAM buffer [mem 0xdf795000-0xdfffffff]
[    0.106255] e820: reserve RAM buffer [mem 0xdf7fd000-0xdfffffff]
[    0.106256] e820: reserve RAM buffer [mem 0x21f800000-0x21fffffff]
[    0.106380] NetLabel: Initializing
[    0.106381] NetLabel:  domain hash size = 128
[    0.106382] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.106406] NetLabel:  unlabeled traffic allowed by default
[    0.109103] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.109108] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.111149] clocksource: Switched to clocksource tsc-early
[    0.124815] *** VALIDATE bpf ***
[    0.124900] VFS: Disk quotas dquot_6.6.0
[    0.124926] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.124958] *** VALIDATE ramfs ***
[    0.124963] *** VALIDATE hugetlbfs ***
[    0.125075] AppArmor: AppArmor Filesystem Enabled
[    0.125107] pnp: PnP ACPI init
[    0.125346] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.125349] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.125351] system 00:00: [io  0xffff] has been reserved
[    0.125352] system 00:00: [io  0xffff] has been reserved
[    0.125354] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.125355] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.125357] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.125359] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.125366] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.125401] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.125467] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.125472] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.125524] system 00:03: [io  0x0240-0x0259] has been reserved
[    0.125529] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.125619] pnp 00:04: Plug and Play ACPI device, IDs SYN0a17 SYN0a00 SYN0002 PNP0f13 (active)
[    0.125669] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.126033] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.126035] system 00:06: [mem 0xfed10000-0xfed17fff] could not be reserved
[    0.126037] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.126038] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.126040] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.126042] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.126044] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.126045] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.126047] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.126049] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.126054] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.126301] pnp: PnP ACPI: found 7 devices
[    0.128004] thermal_sys: Registered thermal governor 'fair_share'
[    0.128005] thermal_sys: Registered thermal governor 'bang_bang'
[    0.128007] thermal_sys: Registered thermal governor 'step_wise'
[    0.128014] thermal_sys: Registered thermal governor 'user_space'
[    0.128016] thermal_sys: Registered thermal governor 'power_allocator'
[    0.132523] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.132573] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.132576] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.132579] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf40fffff]
[    0.132582] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xebffffff 64bit pref]
[    0.132586] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.132589] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    0.132594] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf69fffff]
[    0.132599] pci 0000:00:1c.0:   bridge window [mem 0xee200000-0xeebfffff 64bit pref]
[    0.132606] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.132609] pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
[    0.132614] pci 0000:00:1c.1:   bridge window [mem 0xf5600000-0xf5ffffff]
[    0.132619] pci 0000:00:1c.1:   bridge window [mem 0xed700000-0xee0fffff 64bit pref]
[    0.132625] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.132628] pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
[    0.132634] pci 0000:00:1c.3:   bridge window [mem 0xf4c00000-0xf55fffff]
[    0.132638] pci 0000:00:1c.3:   bridge window [mem 0xecc00000-0xed5fffff 64bit pref]
[    0.132645] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.132648] pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
[    0.132654] pci 0000:00:1c.5:   bridge window [mem 0xf4200000-0xf4bfffff]
[    0.132658] pci 0000:00:1c.5:   bridge window [mem 0xec100000-0xecafffff 64bit pref]
[    0.132666] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.132667] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.132669] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.132670] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.132672] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.132673] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.132675] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.132676] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.132677] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.132679] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.132680] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window]
[    0.132682] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.132683] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf40fffff]
[    0.132685] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xebffffff 64bit pref]
[    0.132686] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.132687] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf69fffff]
[    0.132689] pci_bus 0000:02: resource 2 [mem 0xee200000-0xeebfffff 64bit pref]
[    0.132690] pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
[    0.132692] pci_bus 0000:03: resource 1 [mem 0xf5600000-0xf5ffffff]
[    0.132693] pci_bus 0000:03: resource 2 [mem 0xed700000-0xee0fffff 64bit pref]
[    0.132694] pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
[    0.132696] pci_bus 0000:04: resource 1 [mem 0xf4c00000-0xf55fffff]
[    0.132697] pci_bus 0000:04: resource 2 [mem 0xecc00000-0xed5fffff 64bit pref]
[    0.132698] pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
[    0.132700] pci_bus 0000:05: resource 1 [mem 0xf4200000-0xf4bfffff]
[    0.132701] pci_bus 0000:05: resource 2 [mem 0xec100000-0xecafffff 64bit pref]
[    0.132847] NET: Registered protocol family 2
[    0.132973] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.134550] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.134615] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.134833] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.134965] TCP: Hash tables configured (established 65536 bind 65536)
[    0.135025] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.135063] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.135157] NET: Registered protocol family 1
[    0.135162] NET: Registered protocol family 44
[    0.468238] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x670 took 325248 usecs
[    0.900226] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x670 took 421837 usecs
[    0.900252] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.900264] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.900568] PCI: CLS 64 bytes, default 64
[    0.900624] Trying to unpack rootfs image as initramfs...
[    1.168366] Freeing initrd memory: 80964K
[    1.168423] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.168425] software IO TLB: mapped [mem 0xdb40f000-0xdf40f000] (64MB)
[    1.168772] check: Scanning for low memory corruption every 60 seconds
[    1.169446] Initialise system trusted keyrings
[    1.169458] Key type blacklist registered
[    1.169491] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.171228] zbud: loaded
[    1.171712] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.171908] fuse: init (API version 7.31)
[    1.171930] *** VALIDATE fuse ***
[    1.171932] *** VALIDATE fuse ***
[    1.172111] Platform Keyring initialized
[    1.177351] Key type asymmetric registered
[    1.177353] Asymmetric key parser 'x509' registered
[    1.177362] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.177409] io scheduler mq-deadline registered
[    1.177824] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[    1.178073] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[    1.178333] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
[    1.178481] pcieport 0000:00:1c.3: PME: Signaling with IRQ 27
[    1.178733] pcieport 0000:00:1c.5: PME: Signaling with IRQ 28
[    1.178821] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.178891] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    1.178892] vesafb: scrolling: redraw
[    1.178893] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.178907] vesafb: framebuffer at 0xe9000000, mapped to 0x(____ptrval____), using 1216k, total 1216k
[    1.178950] fbcon: Deferring console take-over
[    1.178951] fb0: VESA VGA frame buffer device
[    1.178966] intel_idle: MWAIT substates: 0x21120
[    1.178967] intel_idle: v0.4.1 model 0x2A
[    1.179391] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.179562] ACPI: AC Adapter [AC0] (on-line)
[    1.179637] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.179658] ACPI: Lid Switch [LID]
[    1.179696] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.179740] ACPI: Sleep Button [SLPB]
[    1.179778] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.179809] ACPI: Power Button [PWRF]
[    1.182339] thermal LNXTHERM:00: registered as thermal_zone0
[    1.182341] ACPI: Thermal Zone [THRM] (55 C)
[    1.182571] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.192965] Linux agpgart interface v0.103
[    1.230969] battery: ACPI: Battery Slot [BAT0] (battery present)
[    1.364206] loop: module loaded
[    1.364625] libphy: Fixed MDIO Bus: probed
[    1.364627] tun: Universal TUN/TAP device driver, 1.6
[    1.364764] PPP generic driver version 2.4.2
[    1.365013] VFIO - User Level meta-driver version: 0.3
[    1.365241] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.365247] ehci-pci: EHCI PCI platform driver
[    1.365461] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.365468] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.365484] ehci-pci 0000:00:1a.0: debug port 2
[    1.369390] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.369408] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf6a08000
[    1.384119] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.384231] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.384233] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.384235] usb usb1: Product: EHCI Host Controller
[    1.384236] usb usb1: Manufacturer: Linux 5.4.0-89-generic ehci_hcd
[    1.384238] usb usb1: SerialNumber: 0000:00:1a.0
[    1.384514] hub 1-0:1.0: USB hub found
[    1.384524] hub 1-0:1.0: 6 ports detected
[    1.384955] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.384961] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.384975] ehci-pci 0000:00:1d.0: debug port 2
[    1.388893] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.388911] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf6a07000
[    1.404120] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.404247] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.404249] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.404251] usb usb2: Product: EHCI Host Controller
[    1.404253] usb usb2: Manufacturer: Linux 5.4.0-89-generic ehci_hcd
[    1.404254] usb usb2: SerialNumber: 0000:00:1d.0
[    1.404557] hub 2-0:1.0: USB hub found
[    1.404567] hub 2-0:1.0: 8 ports detected
[    1.404844] ehci-platform: EHCI generic platform driver
[    1.404863] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.404867] ohci-pci: OHCI PCI platform driver
[    1.404882] ohci-platform: OHCI generic platform driver
[    1.404890] uhci_hcd: USB Universal Host Controller Interface driver
[    1.405051] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.405058] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    1.549098] xhci_hcd 0000:04:00.0: hcc params 0x200071b9 hci version 0x96 quirks 0x00000000000a0440
[    1.549281] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.549283] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.549284] usb usb3: Product: xHCI Host Controller
[    1.549286] usb usb3: Manufacturer: Linux 5.4.0-89-generic xhci-hcd
[    1.549287] usb usb3: SerialNumber: 0000:04:00.0
[    1.549483] hub 3-0:1.0: USB hub found
[    1.549496] hub 3-0:1.0: 1 port detected
[    1.549634] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.549638] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    1.549642] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[    1.549679] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.549706] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    1.549707] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.549709] usb usb4: Product: xHCI Host Controller
[    1.549710] usb usb4: Manufacturer: Linux 5.4.0-89-generic xhci-hcd
[    1.549711] usb usb4: SerialNumber: 0000:04:00.0
[    1.549929] hub 4-0:1.0: USB hub found
[    1.549941] hub 4-0:1.0: 1 port detected
[    1.550076] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.551592] i8042: Detected active multiplexing controller, rev 1.1
[    1.552434] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.552439] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.552471] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.552496] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.552521] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.552796] mousedev: PS/2 mouse device common for all mice
[    1.553296] rtc_cmos 00:01: RTC can wake from S4
[    1.553613] rtc_cmos 00:01: registered as rtc0
[    1.553634] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.553643] i2c /dev entries driver
[    1.553700] device-mapper: uevent: version 1.0.3
[    1.553808] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    1.553832] platform eisa.0: Probing EISA bus 0
[    1.553833] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.553835] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.553836] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.553838] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.553839] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.553840] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.553842] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.553843] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.553844] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.553845] platform eisa.0: EISA: Detected 0 cards
[    1.553852] intel_pstate: Intel P-state driver initializing
[    1.554670] ledtrig-cpu: registered to indicate activity on CPUs
[    1.554749] drop_monitor: Initializing network drop monitor service
[    1.554917] NET: Registered protocol family 10
[    1.561776] Segment Routing with IPv6
[    1.561797] NET: Registered protocol family 17
[    1.561876] Key type dns_resolver registered
[    1.562434] RAS: Correctable Errors collector initialized.
[    1.562494] microcode: sig=0x206a7, pf=0x10, revision=0x2f
[    1.562647] microcode: Microcode Update Driver: v2.2.
[    1.562651] IPI shorthand broadcast: enabled
[    1.562657] sched_clock: Marking stable (1590636223, -27993427)->(1854893407, -292250611)
[    1.562772] registered taskstats version 1
[    1.562780] Loading compiled-in X.509 certificates
[    1.563775] Loaded X.509 cert 'Build time autogenerated kernel key: 6de7ad59885645b611aa8f413e9db545247a2774'
[    1.564623] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    1.565459] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    1.565500] zswap: loaded using pool lzo/zbud
[    1.565706] Key type ._fscrypt registered
[    1.565707] Key type .fscrypt registered
[    1.572025] Key type big_key registered
[    1.575038] Key type encrypted registered
[    1.575041] AppArmor: AppArmor sha1 policy hashing enabled
[    1.575048] ima: No TPM chip found, activating TPM-bypass!
[    1.575053] ima: Allocated hash algorithm: sha1
[    1.575060] ima: No architecture policies found
[    1.575067] evm: Initialising EVM extended attributes:
[    1.575068] evm: security.selinux
[    1.575069] evm: security.SMACK64
[    1.575069] evm: security.SMACK64EXEC
[    1.575070] evm: security.SMACK64TRANSMUTE
[    1.575070] evm: security.SMACK64MMAP
[    1.575071] evm: security.apparmor
[    1.575071] evm: security.ima
[    1.575072] evm: security.capability
[    1.575073] evm: HMAC attrs: 0x1
[    1.575470] PM:   Magic number: 9:522:330
[    1.575497] tty tty51: hash matches
[    1.575582] rtc_cmos 00:01: setting system clock to 2021-10-26T12:19:27 UTC (1635250767)
[    1.576936] Freeing unused decrypted memory: 2040K
[    1.577425] Freeing unused kernel image memory: 2728K
[    1.590616] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.620216] Write protecting the kernel read-only data: 22528k
[    1.620843] Freeing unused kernel image memory: 2008K
[    1.621100] Freeing unused kernel image memory: 1128K
[    1.631593] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.631594] x86/mm: Checking user space page tables
[    1.641412] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.641414] Run /init as init process
[    1.719199] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.724033] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.725905] acpi device:02: registered as cooling_device8
[    1.727748] acpi device:04: registered as cooling_device9
[    1.727881] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
[    1.734399] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20190816/utaddress-204)
[    1.734407] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
[    1.734413] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.734416] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20190816/utaddress-204)
[    1.734421] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20190816/utaddress-204)
[    1.734425] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.734426] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20190816/utaddress-204)
[    1.734431] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20190816/utaddress-204)
[    1.734436] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.734437] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20190816/utaddress-204)
[    1.734442] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20190816/utaddress-204)
[    1.734447] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.734447] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.735354] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.737645] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.738328] ahci 0000:00:1f.2: version 3.0
[    1.743421] libphy: r8169: probed
[    1.744029] r8169 0000:05:00.0 eth0: RTL8168e/8111e, 14:da:e9:4b:f7:78, XID 2c2, IRQ 29
[    1.744032] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.744035] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.752036] cryptd: max_cpu_qlen set to 1000
[    1.752054] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.752058] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    1.759761] tsc: Refined TSC clocksource calibration: 1995.467 MHz
[    1.759770] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3986e85801c, max_idle_ns: 881590625023 ns
[    1.781801] clocksource: Switched to clocksource tsc
[    1.782320] AVX version of gcm_enc/dec engaged.
[    1.782321] AES CTR mode by8 optimization enabled
[    1.784260] scsi host0: ahci
[    1.784449] scsi host1: ahci
[    1.784549] scsi host2: ahci
[    1.784842] scsi host3: ahci
[    1.784936] scsi host4: ahci
[    1.785046] scsi host5: ahci
[    1.785124] ata1: SATA max UDMA/133 abar m2048@0xf6a06000 port 0xf6a06100 irq 30
[    1.785126] ata2: DUMMY
[    1.785129] ata3: SATA max UDMA/133 abar m2048@0xf6a06000 port 0xf6a06200 irq 30
[    1.785130] ata4: DUMMY
[    1.785131] ata5: DUMMY
[    1.785132] ata6: DUMMY
[    1.793936] r8169 0000:05:00.0 enp5s0: renamed from eth0
[    1.848326] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.848329] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.848373] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.848375] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.848599] hub 1-1:1.0: USB hub found
[    1.848625] hub 2-1:1.0: USB hub found
[    1.848695] hub 1-1:1.0: 6 ports detected
[    1.848701] hub 2-1:1.0: 6 ports detected
[    1.884123] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[    1.892811] ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59)
[    1.892835] ACPI: \_SB_.PCI0.PEG0.GFX0: failed to evaluate _DSM
[    1.892985] checking generic (e9000000 130000) vs hw (e0000000 8000000)
[    1.892986] checking generic (e9000000 130000) vs hw (e8000000 4000000)
[    1.892987] fb0: switching to nouveaufb from VESA VGA
[    1.893174] nouveau 0000:01:00.0: NVIDIA GF116 (0cf880a1)
[    2.021655] nouveau 0000:01:00.0: bios: version 70.26.29.00.0c
[    2.035425] usb 3-1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[    2.035427] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.035428] usb 3-1: Product: USB OPTICAL MOUSE
[    2.035429] usb 3-1: Manufacturer: PIXART
[    2.042512] hidraw: raw HID events driver (C) Jiri Kosina
[    2.044801] nouveau 0000:01:00.0: fb: 3072 MiB GDDR5
[    2.046072] usbcore: registered new interface driver usbhid
[    2.046073] usbhid: USB HID core driver
[    2.076348] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/0003:093A:2510.0001/input/input13
[    2.076516] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:04:00.0-1/input0
[    2.102345] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.105104] [TTM] Zone  kernel: Available graphics memory: 4063608 KiB
[    2.105104] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    2.105105] [TTM] Initializing pool allocator
[    2.105109] [TTM] Initializing DMA pool allocator
[    2.105119] nouveau 0000:01:00.0: DRM: VRAM: 3072 MiB
[    2.105120] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    2.105123] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    2.105124] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    2.105126] nouveau 0000:01:00.0: DRM: DCB outp 00: 01800323 00010034
[    2.105127] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011300 00000000
[    2.105129] nouveau 0000:01:00.0: DRM: DCB outp 02: 08022382 00020010
[    2.105130] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040
[    2.105131] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[    2.105132] nouveau 0000:01:00.0: DRM: DCB conn 02: 00010261
[    2.105695] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.105697] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.105968] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    2.106376] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.106513] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.106514] [drm] Driver supports precise vblank timestamp query.
[    2.107134] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.107271] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.107273] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.107795] ata1.00: ATA-10: WDC WD10SPSX-00A6WT0, 01.01A01, max UDMA/133
[    2.107796] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.107908] ata3.00: ATAPI: HL-DT-STDVDRAM GT34N, AS00, max UDMA/100
[    2.108567] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.108702] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.108704] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.109272] ata1.00: configured for UDMA/133
[    2.109640] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10SPSX-00A 1A01 PQ: 0 ANSI: 5
[    2.109938] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.109950] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.109952] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.109966] sd 0:0:0:0: [sda] Write Protect is off
[    2.109968] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.109982] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.111637] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.111639] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.113906] ata3.00: configured for UDMA/100
[    2.130047] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT34N     AS00 PQ: 0 ANSI: 5
[    2.140038] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    2.196196] nouveau 0000:01:00.0: DRM: allocated 1600x900 fb: 0x60000, bo (____ptrval____)
[    2.196294] fbcon: nouveaudrmfb (fb0) is primary device
[    2.196295] fbcon: Deferring console take-over
[    2.196297] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device
[    2.220642] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    2.251634]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    2.264177] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.264188] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.272334] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.296217] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.296342] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.347246] random: fast init done
[    2.356080] usb 1-1.2: New USB device found, idVendor=1bcf, idProduct=2885, bcdDevice= 4.29
[    2.356083] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.356084] usb 1-1.2: Product: ASUS USB2.0 Webcam
[    2.356085] usb 1-1.2: Manufacturer: 04G626000610B816A000NP8
[    2.356379] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.356388] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.356406] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.612065] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    2.721814] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0139, bcdDevice=39.60
[    2.721821] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.721825] usb 1-1.4: Product: USB2.0-CRW
[    2.721829] usb 1-1.4: Manufacturer: Generic
[    2.721832] usb 1-1.4: SerialNumber: 20100201396000000
[    2.727902] usbcore: registered new interface driver rtsx_usb
[    3.595469] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    6.041188] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    6.283884] random: crng init done
[    6.283890] random: 7 urandom warning(s) missed due to ratelimiting
[    6.286318] systemd[1]: Inserted module 'autofs4'
[    6.370444] systemd[1]: systemd 245.4-4ubuntu3.13 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    6.388299] systemd[1]: Detected architecture x86-64.
[    6.413300] systemd[1]: Set hostname to <Izgrev>.
[    7.584380] systemd[1]: Created slice system-modprobe.slice.
[    7.584633] systemd[1]: Created slice User and Session Slice.
[    7.584701] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.584931] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.584978] systemd[1]: Reached target User and Group Name Lookups.
[    7.584992] systemd[1]: Reached target Remote File Systems.
[    7.585006] systemd[1]: Reached target Slices.
[    7.590878] systemd[1]: Listening on Syslog Socket.
[    7.591019] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.591083] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    7.591277] systemd[1]: Listening on Journal Audit Socket.
[    7.591366] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.591486] systemd[1]: Listening on Journal Socket.
[    7.591592] systemd[1]: Listening on udev Control Socket.
[    7.591659] systemd[1]: Listening on udev Kernel Socket.
[    7.592630] systemd[1]: Mounting Huge Pages File System...
[    7.593541] systemd[1]: Mounting POSIX Message Queue File System...
[    7.594460] systemd[1]: Mounting Kernel Debug File System...
[    7.595401] systemd[1]: Mounting Kernel Trace File System...
[    7.597176] systemd[1]: Starting Journal Service...
[    7.598598] systemd[1]: Starting Set the console keyboard layout...
[    7.600102] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    7.600171] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    7.617860] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    7.617917] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    7.635249] systemd[1]: Starting Load Kernel Modules...
[    7.636054] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.636947] systemd[1]: Starting udev Coldplug all Devices...
[    7.637825] systemd[1]: Starting Uncomplicated firewall...
[    7.639877] systemd[1]: Mounted Huge Pages File System.
[    7.640066] systemd[1]: Mounted POSIX Message Queue File System.
[    7.640198] systemd[1]: Mounted Kernel Debug File System.
[    7.640321] systemd[1]: Mounted Kernel Trace File System.
[    7.648277] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    7.753391] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[    7.754986] systemd[1]: Finished Remount Root and Kernel File Systems.
[    7.771661] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    7.771732] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    7.773047] systemd[1]: Starting Load/Save Random Seed...
[    7.774579] systemd[1]: Starting Create System Users...
[    7.830832] systemd[1]: Started Journal Service.
[    7.938466] systemd-journald[360]: Received client request to flush runtime journal.
[    8.297615] lp: driver loaded but no devices found
[    8.387223] ppdev: user-space parallel port driver
[   10.059899] audit: type=1400 audit(1635243575.977:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=403 comm="apparmor_parser"
[   10.060094] audit: type=1400 audit(1635243575.981:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=404 comm="apparmor_parser"
[   10.084402] audit: type=1400 audit(1635243576.005:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=401 comm="apparmor_parser"
[   10.104366] audit: type=1400 audit(1635243576.025:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=410 comm="apparmor_parser"
[   10.104462] audit: type=1400 audit(1635243576.025:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=408 comm="apparmor_parser"
[   10.104466] audit: type=1400 audit(1635243576.025:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=408 comm="apparmor_parser"
[   10.104471] audit: type=1400 audit(1635243576.025:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=408 comm="apparmor_parser"
[   10.114239] audit: type=1400 audit(1635243576.033:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=412 comm="apparmor_parser"
[   10.114243] audit: type=1400 audit(1635243576.033:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=412 comm="apparmor_parser"
[   10.151217] audit: type=1400 audit(1635243576.069:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=414 comm="apparmor_parser"
[   10.870408] asus_wmi: ASUS WMI generic driver loaded
[   10.877686] asus_wmi: Initialization: 0x1
[   10.877747] asus_wmi: BIOS WMI version: 7.6
[   10.877825] asus_wmi: SFUN value: 0xa0877
[   10.877828] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[   10.877830] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[   10.879282] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input14
[   10.959171] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[   10.959173] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   10.959174] RAPL PMU: hw unit of domain package 2^-16 Joules
[   11.248842] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   11.249235] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   11.434655] intel_rapl_common: Found RAPL domain package
[   11.434656] intel_rapl_common: Found RAPL domain core
[   11.448857] mc: Linux media interface: v0.10
[   11.487963] videodev: Linux video capture interface: v2.00
[   11.668225] snd_hda_intel 0000:01:00.1: Disabling MSI
[   11.668231] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   11.706250] ath: phy0: Enable LNA combining
[   11.708838] ath: phy0: ASPM enabled: 0x42
[   11.708841] ath: EEPROM regdomain: 0x60
[   11.708842] ath: EEPROM indicates we should expect a direct regpair map
[   11.708843] ath: Country alpha2 being used: 00
[   11.708844] ath: Regpair used: 0x60
[   11.709638] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2885)
[   11.710573] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.711027] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffbfd4c09a0000, irq=17
[   11.745372] input: ASUS USB2.0 Webcam: ASUS USB2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input15
[   11.745526] usbcore: registered new interface driver uvcvideo
[   11.745527] USB Video Class driver (1.1.1)
[   11.754723] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[   11.867956] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
[   11.867959] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.867960] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   11.867961] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.867962] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   11.867963] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.867965] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   11.867966] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   11.875873] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   11.875954] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   13.020910] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[   13.020991] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[   13.021060] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[   13.021126] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[   15.256106] Adding 3998716k swap on /dev/sda6.  Priority:-2 extents:1 across:3998716k FS
[   21.443806] kauditd_printk_skb: 14 callbacks suppressed
[   21.443809] audit: type=1400 audit(1635243587.361:26): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=751 comm="cups-browsed" capability=23  capname="sys_nice"
[   22.528517] RTL8211DN Gigabit Ethernet r8169-0-500:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-500:00, irq=IGNORE)
[   22.765316] r8169 0000:05:00.0 enp5s0: Link is Down
[   68.389402] wlp3s0: authenticate with f0:68:65:6d:8d:49
[   68.403077] wlp3s0: send auth to f0:68:65:6d:8d:49 (try 1/3)
[   68.404906] wlp3s0: authenticated
[   68.405106] wlp3s0: associating with AP with corrupt probe response
[   68.412043] wlp3s0: associate with f0:68:65:6d:8d:49 (try 1/3)
[   68.418980] wlp3s0: RX AssocResp from f0:68:65:6d:8d:49 (capab=0x1411 status=0 aid=3)
[   68.419152] wlp3s0: associated
[   68.419311] ath: EEPROM regdomain: 0x8114
[   68.419312] ath: EEPROM indicates we should expect a country code
[   68.419313] ath: doing EEPROM country->regdmn map search
[   68.419315] ath: country maps to regdmn code: 0x37
[   68.419316] ath: Country alpha2 being used: DE
[   68.419317] ath: Regpair used: 0x37
[   68.419319] ath: regdomain 0x8114 dynamically updated by country element
[   68.515532] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by f0:68:65:6d:8d:49
[   68.594990] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[  488.734597] audit: type=1400 audit(1635244054.653:27): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/kubuntu-default-settings/kf5-settings/kdeglobals" pid=4220 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  488.735313] audit: type=1400 audit(1635244054.653:28): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/kubuntu-default-settings/kf5-settings/kdeglobals" pid=4220 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  488.735796] audit: type=1400 audit(1635244054.653:29): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/kubuntu-default-settings/kf5-settings/kdeglobals" pid=4220 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  488.741465] audit: type=1400 audit(1635244054.661:30): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/sys/kernel/core_pattern" pid=4220 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  488.744585] audit: type=1400 audit(1635244054.665:31): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/kubuntu-default-settings/kf5-settings/kdeglobals" pid=4220 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  488.744960] audit: type=1400 audit(1635244054.665:32): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/kubuntu-default-settings/kf5-settings/breezerc" pid=4220 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  490.344492] audit: type=1400 audit(1635244056.265:33): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/kubuntu-default-settings/kf5-settings/kdeglobals" pid=4220 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  490.344845] audit: type=1400 audit(1635244056.265:34): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/yayou/.config/emaildefaults" pid=4220 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000

lsusb

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card Reader Controller
Bus 001 Device 003: ID 1bcf:2885 Sunplus Innovation Technology Inc. ASUS Webcam
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lspci

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GF116M [GeForce GT 560M] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1)
03:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
04:00.0 USB controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 04)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

Je vais continuer à guetter le problème.

Hors ligne

#8 Le 05/11/2021, à 11:31

yayou

Re : Ports USB défectueux

J'ai finalement pu taper les commandes lorsque la souris avait planté.
dmesg

[    0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
[    0.000000] Linux version 5.4.0-89-generic (buildd@lgw01-amd64-044) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #100-Ubuntu SMP Fri Sep 24 14:50:10 UTC 2021 (Ubuntu 5.4.0-89.100-generic 5.4.143)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-89-generic root=UUID=a07a6274-f7d5-44bb-b9e1-c7483741830a ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002004ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020050000-0x000000002024ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020250000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000df40efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df40f000-0x00000000df58dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df58e000-0x00000000df596fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df597000-0x00000000df597fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df598000-0x00000000df598fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df599000-0x00000000df5b7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df5b8000-0x00000000df5c7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df5c8000-0x00000000df5e7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df5e8000-0x00000000df72afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df72b000-0x00000000df788fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df789000-0x00000000df794fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df795000-0x00000000df7e7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df7e8000-0x00000000df7fcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df7fd000-0x00000000df7fffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df800000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: ASUSTeK Computer Inc. G74Sx/G74Sx, BIOS G74Sx.201 04/27/2011
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1995.552 MHz processor
[    0.002846] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002848] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002861] last_pfn = 0x21f800 max_arch_pfn = 0x400000000
[    0.002866] MTRR default type: uncachable
[    0.002867] MTRR fixed ranges enabled:
[    0.002868]   00000-9FFFF write-back
[    0.002869]   A0000-BFFFF uncachable
[    0.002870]   C0000-CFFFF write-protect
[    0.002871]   D0000-E7FFF uncachable
[    0.002872]   E8000-FFFFF write-protect
[    0.002873] MTRR variable ranges enabled:
[    0.002875]   0 base 000000000 mask F80000000 write-back
[    0.002876]   1 base 080000000 mask FC0000000 write-back
[    0.002877]   2 base 0C0000000 mask FE0000000 write-back
[    0.002878]   3 base 100000000 mask F00000000 write-back
[    0.002879]   4 base 200000000 mask FE0000000 write-back
[    0.002880]   5 base 21F800000 mask FFF800000 uncachable
[    0.002881]   6 base 0FFC00000 mask FFFC00000 write-protect
[    0.002882]   7 disabled
[    0.002883]   8 disabled
[    0.002883]   9 disabled
[    0.004037] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.004225] last_pfn = 0xdf7fd max_arch_pfn = 0x400000000
[    0.017226] found SMP MP-table at [mem 0x000fcc70-0x000fcc7f]
[    0.034009] check: Scanning 1 areas for low memory corruption
[    0.035232] RAMDISK: [mem 0x2e1cd000-0x330ddfff]
[    0.035240] ACPI: Early table checksum verification disabled
[    0.035245] ACPI: RSDP 0x00000000000F0430 000024 (v02 _ASUS_)
[    0.035249] ACPI: XSDT 0x00000000DF7FEE18 000074 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
[    0.035257] ACPI: FACP 0x00000000DF79AD98 0000F4 (v04 _ASUS_ Notebook 06222004 MSFT 00010013)
[    0.035264] ACPI: DSDT 0x00000000DF76B018 0109D3 (v01 _ASUS_ Notebook 00000000 INTL 20091112)
[    0.035268] ACPI: FACS 0x00000000DF7E4E40 000040
[    0.035271] ACPI: FACS 0x00000000DF7E4D40 000040
[    0.035275] ACPI: APIC 0x00000000DF7FDF18 0000CC (v02 _ASUS_ Notebook 06222004 MSFT 00010013)
[    0.035278] ACPI: DBGP 0x00000000DF7FFF18 000034 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
[    0.035282] ACPI: ECDT 0x00000000DF7E4B18 0000C1 (v01 _ASUS_ Notebook 06222004 AMI. 00000003)
[    0.035286] ACPI: SLIC 0x00000000DF79BE18 000176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
[    0.035289] ACPI: HPET 0x00000000DF7E5D18 000038 (v01 _ASUS_ Notebook 06222004 AMI. 00000003)
[    0.035293] ACPI: MCFG 0x00000000DF7E5C98 00003C (v01 _ASUS_ Notebook 06222004 MSFT 00000097)
[    0.035296] ACPI: SSDT 0x00000000DF788018 000913 (v01 PmRef  Cpu0Ist  00003000 INTL 20091112)
[    0.035300] ACPI: SSDT 0x00000000DF787018 000996 (v01 PmRef  CpuPm    00003000 INTL 20091112)
[    0.035304] ACPI: ASF! 0x00000000DF7E4A18 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.035308] ACPI: Reserving FACP table memory at [mem 0xdf79ad98-0xdf79ae8b]
[    0.035309] ACPI: Reserving DSDT table memory at [mem 0xdf76b018-0xdf77b9ea]
[    0.035310] ACPI: Reserving FACS table memory at [mem 0xdf7e4e40-0xdf7e4e7f]
[    0.035311] ACPI: Reserving FACS table memory at [mem 0xdf7e4d40-0xdf7e4d7f]
[    0.035312] ACPI: Reserving APIC table memory at [mem 0xdf7fdf18-0xdf7fdfe3]
[    0.035313] ACPI: Reserving DBGP table memory at [mem 0xdf7fff18-0xdf7fff4b]
[    0.035314] ACPI: Reserving ECDT table memory at [mem 0xdf7e4b18-0xdf7e4bd8]
[    0.035315] ACPI: Reserving SLIC table memory at [mem 0xdf79be18-0xdf79bf8d]
[    0.035316] ACPI: Reserving HPET table memory at [mem 0xdf7e5d18-0xdf7e5d4f]
[    0.035317] ACPI: Reserving MCFG table memory at [mem 0xdf7e5c98-0xdf7e5cd3]
[    0.035318] ACPI: Reserving SSDT table memory at [mem 0xdf788018-0xdf78892a]
[    0.035319] ACPI: Reserving SSDT table memory at [mem 0xdf787018-0xdf7879ad]
[    0.035319] ACPI: Reserving ASF! table memory at [mem 0xdf7e4a18-0xdf7e4ab7]
[    0.035334] ACPI: Local APIC address 0xfee00000
[    0.035488] No NUMA configuration found
[    0.035489] Faking a node at [mem 0x0000000000000000-0x000000021f7fffff]
[    0.035503] NODE_DATA(0) allocated [mem 0x21f7d1000-0x21f7fbfff]
[    0.035882] Zone ranges:
[    0.035883]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.035885]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.035886]   Normal   [mem 0x0000000100000000-0x000000021f7fffff]
[    0.035887]   Device   empty
[    0.035888] Movable zone start for each node
[    0.035892] Early memory node ranges
[    0.035893]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.035894]   node   0: [mem 0x0000000000100000-0x000000002004ffff]
[    0.035895]   node   0: [mem 0x0000000020250000-0x000000003fffffff]
[    0.035896]   node   0: [mem 0x0000000040200000-0x00000000df40efff]
[    0.035897]   node   0: [mem 0x00000000df58e000-0x00000000df596fff]
[    0.035898]   node   0: [mem 0x00000000df598000-0x00000000df598fff]
[    0.035899]   node   0: [mem 0x00000000df5b8000-0x00000000df5c7fff]
[    0.035900]   node   0: [mem 0x00000000df5e8000-0x00000000df72afff]
[    0.035900]   node   0: [mem 0x00000000df789000-0x00000000df794fff]
[    0.035901]   node   0: [mem 0x00000000df7e8000-0x00000000df7fcfff]
[    0.035902]   node   0: [mem 0x0000000100000000-0x000000021f7fffff]
[    0.035977] Zeroed struct page in unavailable ranges: 5846 pages
[    0.035978] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f7fffff]
[    0.035981] On node 0 totalpages: 2091306
[    0.035982]   DMA zone: 64 pages used for memmap
[    0.035983]   DMA zone: 21 pages reserved
[    0.035984]   DMA zone: 3997 pages, LIFO batch:0
[    0.036059]   DMA32 zone: 14215 pages used for memmap
[    0.036060]   DMA32 zone: 909709 pages, LIFO batch:63
[    0.052459]   Normal zone: 18400 pages used for memmap
[    0.052461]   Normal zone: 1177600 pages, LIFO batch:63
[    0.072500] ACPI: PM-Timer IO Port: 0x408
[    0.072503] ACPI: Local APIC address 0xfee00000
[    0.072527] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.072531] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.072532] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.072534] ACPI: IRQ0 used by override.
[    0.072535] ACPI: IRQ9 used by override.
[    0.072538] Using ACPI (MADT) for SMP configuration information
[    0.072540] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.072545] TSC deadline timer available
[    0.072546] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[    0.072592] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.072594] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.072595] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.072596] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.072596] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.072599] PM: Registered nosave memory: [mem 0x20050000-0x2024ffff]
[    0.072601] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.072604] PM: Registered nosave memory: [mem 0xdf40f000-0xdf58dfff]
[    0.072606] PM: Registered nosave memory: [mem 0xdf597000-0xdf597fff]
[    0.072609] PM: Registered nosave memory: [mem 0xdf599000-0xdf5b7fff]
[    0.072611] PM: Registered nosave memory: [mem 0xdf5c8000-0xdf5e7fff]
[    0.072614] PM: Registered nosave memory: [mem 0xdf72b000-0xdf788fff]
[    0.072616] PM: Registered nosave memory: [mem 0xdf795000-0xdf7e7fff]
[    0.072619] PM: Registered nosave memory: [mem 0xdf7fd000-0xdf7fffff]
[    0.072619] PM: Registered nosave memory: [mem 0xdf800000-0xdfffffff]
[    0.072620] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.072621] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.072622] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.072622] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.072623] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.072624] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.072624] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.072625] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.072626] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.072626] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.072627] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.072628] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.072628] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[    0.072629] PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
[    0.072630] PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
[    0.072630] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.072632] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.072634] Booting paravirtualized kernel on bare hardware
[    0.072637] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.072647] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.073151] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
[    0.073163] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
[    0.073164] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.073215] Built 1 zonelists, mobility grouping on.  Total pages: 2058606
[    0.073216] Policy zone: Normal
[    0.073218] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-89-generic root=UUID=a07a6274-f7d5-44bb-b9e1-c7483741830a ro quiet splash vt.handoff=7
[    0.074092] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.074366] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.074585] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.079003] Calgary: detecting Calgary via BIOS EBDA area
[    0.079005] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.102992] Memory: 8038308K/8365224K available (14339K kernel code, 2400K rwdata, 5016K rodata, 2728K init, 4972K bss, 326916K reserved, 0K cma-reserved)
[    0.103000] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[    0.103195] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.103211] Kernel/User page tables isolation: enabled
[    0.103231] ftrace: allocating 44619 entries in 175 pages
[    0.126662] rcu: Hierarchical RCU implementation.
[    0.126665] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[    0.126666] 	Tasks RCU enabled.
[    0.126667] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.126668] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.130876] NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16
[    0.131165] vt handoff: transparent VT on vt#7
[    0.131175] Console: colour dummy device 80x25
[    0.131179] printk: console [tty0] enabled
[    0.131201] ACPI: Core revision 20190816
[    0.131363] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.131381] APIC: Switch to symmetric I/O mode setup
[    0.131479] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.131510] Switched APIC routing to physical flat.
[    0.131992] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.151381] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39878921d98, max_idle_ns: 881590756652 ns
[    0.151386] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.10 BogoMIPS (lpj=7982208)
[    0.151389] pid_max: default: 32768 minimum: 301
[    0.151438] LSM: Security Framework initializing
[    0.151452] Yama: becoming mindful.
[    0.151529] AppArmor: AppArmor initialized
[    0.151589] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.151605] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.151624] *** VALIDATE tmpfs ***
[    0.151826] *** VALIDATE proc ***
[    0.151898] *** VALIDATE cgroup1 ***
[    0.151899] *** VALIDATE cgroup2 ***
[    0.151959] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.151975] process: using mwait in idle threads
[    0.151979] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.151980] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.151983] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.151984] Spectre V2 : Mitigation: Full generic retpoline
[    0.151985] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.151986] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.151987] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.151988] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.151990] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.151994] MDS: Mitigation: Clear CPU buffers
[    0.152184] Freeing SMP alternatives memory: 40K
[    0.155490] smpboot: CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.155618] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.155625] ... version:                3
[    0.155626] ... bit width:              48
[    0.155627] ... generic registers:      4
[    0.155628] ... value mask:             0000ffffffffffff
[    0.155628] ... max period:             00007fffffffffff
[    0.155629] ... fixed-purpose events:   3
[    0.155630] ... event mask:             000000070000000f
[    0.155677] rcu: Hierarchical SRCU implementation.
[    0.157344] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.157531] smp: Bringing up secondary CPUs ...
[    0.157666] x86: Booting SMP configuration:
[    0.157667] .... node  #0, CPUs:        #1  #2  #3  #4
[    0.170069] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.170069]   #5  #6  #7
[    0.175457] smp: Brought up 1 node, 8 CPUs
[    0.175457] smpboot: Max logical packages: 2
[    0.175457] smpboot: Total of 8 processors activated (31928.83 BogoMIPS)
[    0.179828] devtmpfs: initialized
[    0.179828] x86/mm: Memory block size: 128MB
[    0.180480] PM: Registering ACPI NVS region [mem 0xdf72b000-0xdf788fff] (385024 bytes)
[    0.180480] PM: Registering ACPI NVS region [mem 0xdf795000-0xdf7e7fff] (339968 bytes)
[    0.180480] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.180480] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.180480] pinctrl core: initialized pinctrl subsystem
[    0.180480] PM: RTC time: 05:17:40, date: 2021-11-05
[    0.180480] NET: Registered protocol family 16
[    0.180480] audit: initializing netlink subsys (disabled)
[    0.180480] audit: type=2000 audit(1636089459.048:1): state=initialized audit_enabled=0 res=1
[    0.180480] EISA bus registered
[    0.180480] cpuidle: using governor ladder
[    0.180480] cpuidle: using governor menu
[    0.180480] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.180480] ACPI: bus type PCI registered
[    0.180480] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.180480] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.180480] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.180480] PCI: Using configuration type 1 for base access
[    0.180480] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.180480] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.180480] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.180480] mtrr: probably your BIOS does not setup all CPUs.
[    0.180480] mtrr: corrected configuration.
[    0.184837] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.184837] ACPI: Added _OSI(Module Device)
[    0.184837] ACPI: Added _OSI(Processor Device)
[    0.184837] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.184837] ACPI: Added _OSI(Processor Aggregator Device)
[    0.184837] ACPI: Added _OSI(Linux-Dell-Video)
[    0.184837] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.184837] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.203983] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.205117] ACPI: EC: EC started
[    0.205118] ACPI: EC: interrupt blocked
[    0.206605] ACPI: \: Used as first EC
[    0.206607] ACPI: \: GPE=0x1b, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.206608] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.207677] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.212188] ACPI: Dynamic OEM Table Load:
[    0.212197] ACPI: SSDT 0xFFFF8D62954AA800 00063C (v01 PmRef  Cpu0Cst  00003001 INTL 20091112)
[    0.213857] ACPI: Dynamic OEM Table Load:
[    0.213862] ACPI: SSDT 0xFFFF8D62954B6400 000303 (v01 PmRef  ApIst    00003000 INTL 20091112)
[    0.215185] ACPI: Dynamic OEM Table Load:
[    0.215190] ACPI: SSDT 0xFFFF8D6295537000 000119 (v01 PmRef  ApCst    00003000 INTL 20091112)
[    0.219001] ACPI: Interpreter enabled
[    0.219038] ACPI: (supports S0 S3 S4 S5)
[    0.219039] ACPI: Using IOAPIC for interrupt routing
[    0.219086] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.219486] ACPI: Enabled 12 GPEs in block 00 to 3F
[    0.235135] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.235142] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.235600] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.236041] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.236042] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.236909] PCI host bridge to bus 0000:00
[    0.236911] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.236913] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.236915] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.236916] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.236917] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.236919] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.236920] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.236921] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.236923] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.236924] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.236925] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.236927] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.236939] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.237085] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.237135] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.237316] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.237348] pci 0000:00:16.0: reg 0x10: [mem 0xf6a0b000-0xf6a0b00f 64bit]
[    0.237435] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.237576] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.237602] pci 0000:00:1a.0: reg 0x10: [mem 0xf6a08000-0xf6a083ff]
[    0.237700] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.237850] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.237879] pci 0000:00:1b.0: reg 0x10: [mem 0xf6a00000-0xf6a03fff 64bit]
[    0.237986] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.238132] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.238253] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.238411] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.238531] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.238691] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.238812] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.238969] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.239089] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.239248] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.239274] pci 0000:00:1d.0: reg 0x10: [mem 0xf6a07000-0xf6a073ff]
[    0.239372] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.239523] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.239799] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.239826] pci 0000:00:1f.2: reg 0x10: [io  0xe070-0xe077]
[    0.239836] pci 0000:00:1f.2: reg 0x14: [io  0xe060-0xe063]
[    0.239846] pci 0000:00:1f.2: reg 0x18: [io  0xe050-0xe057]
[    0.239857] pci 0000:00:1f.2: reg 0x1c: [io  0xe040-0xe043]
[    0.239867] pci 0000:00:1f.2: reg 0x20: [io  0xe020-0xe03f]
[    0.239878] pci 0000:00:1f.2: reg 0x24: [mem 0xf6a06000-0xf6a067ff]
[    0.239940] pci 0000:00:1f.2: PME# supported from D3hot
[    0.240079] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.240105] pci 0000:00:1f.3: reg 0x10: [mem 0xf6a05000-0xf6a050ff 64bit]
[    0.240133] pci 0000:00:1f.3: reg 0x20: [io  0xe000-0xe01f]
[    0.240337] pci 0000:01:00.0: [10de:1251] type 00 class 0x030000
[    0.240351] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf3ffffff]
[    0.240360] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
[    0.240368] pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xebffffff 64bit pref]
[    0.240374] pci 0000:01:00.0: reg 0x24: [io  0xd000-0xd07f]
[    0.240380] pci 0000:01:00.0: reg 0x30: [mem 0xf4000000-0xf407ffff pref]
[    0.240385] pci 0000:01:00.0: enabling Extended Tags
[    0.240528] pci 0000:01:00.1: [10de:0bee] type 00 class 0x040300
[    0.240541] pci 0000:01:00.1: reg 0x10: [mem 0xf4080000-0xf4083fff]
[    0.240572] pci 0000:01:00.1: enabling Extended Tags
[    0.240658] pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring
[    0.251431] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.251437] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.251443] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf40fffff]
[    0.251451] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xebffffff 64bit pref]
[    0.251535] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.251540] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    0.251544] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf69fffff]
[    0.251551] pci 0000:00:1c.0:   bridge window [mem 0xee200000-0xeebfffff 64bit pref]
[    0.251659] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[    0.251717] pci 0000:03:00.0: reg 0x10: [mem 0xf5600000-0xf560ffff 64bit]
[    0.251936] pci 0000:03:00.0: supports D1
[    0.251937] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.252133] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.252137] pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
[    0.252142] pci 0000:00:1c.1:   bridge window [mem 0xf5600000-0xf5ffffff]
[    0.252148] pci 0000:00:1c.1:   bridge window [mem 0xed700000-0xee0fffff 64bit pref]
[    0.252255] pci 0000:04:00.0: [1b73:1000] type 00 class 0x0c0330
[    0.252299] pci 0000:04:00.0: reg 0x10: [mem 0xf4c00000-0xf4c0ffff]
[    0.252505] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.252651] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.252655] pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
[    0.252660] pci 0000:00:1c.3:   bridge window [mem 0xf4c00000-0xf55fffff]
[    0.252666] pci 0000:00:1c.3:   bridge window [mem 0xecc00000-0xed5fffff 64bit pref]
[    0.252818] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    0.252942] pci 0000:05:00.0: reg 0x10: [io  0x9000-0x90ff]
[    0.253063] pci 0000:05:00.0: reg 0x18: [mem 0xec104000-0xec104fff 64bit pref]
[    0.253138] pci 0000:05:00.0: reg 0x20: [mem 0xec100000-0xec103fff 64bit pref]
[    0.253574] pci 0000:05:00.0: supports D1 D2
[    0.253576] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.253966] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.253970] pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
[    0.253975] pci 0000:00:1c.5:   bridge window [mem 0xf4200000-0xf4bfffff]
[    0.253981] pci 0000:00:1c.5:   bridge window [mem 0xec100000-0xecafffff 64bit pref]
[    0.254852] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[    0.254960] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)
[    0.255068] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[    0.255175] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
[    0.255280] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.255383] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.255496] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[    0.255603] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
[    0.255920] ACPI: EC: interrupt unblocked
[    0.255921] ACPI: EC: event unblocked
[    0.255930] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1b, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.255932] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
[    0.256032] iommu: Default domain type: Translated 
[    0.256032] SCSI subsystem initialized
[    0.256032] libata version 3.00 loaded.
[    0.256032] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.256032] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.256032] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.256032] vgaarb: loaded
[    0.256032] ACPI: bus type USB registered
[    0.256032] usbcore: registered new interface driver usbfs
[    0.256032] usbcore: registered new interface driver hub
[    0.256032] usbcore: registered new device driver usb
[    0.256032] pps_core: LinuxPPS API ver. 1 registered
[    0.256032] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.256032] PTP clock support registered
[    0.256032] EDAC MC: Ver: 3.0.0
[    0.256032] PCI: Using ACPI for IRQ routing
[    0.257547] PCI: pci_cache_line_size set to 64 bytes
[    0.257624] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.257626] e820: reserve RAM buffer [mem 0x20050000-0x23ffffff]
[    0.257627] e820: reserve RAM buffer [mem 0xdf40f000-0xdfffffff]
[    0.257629] e820: reserve RAM buffer [mem 0xdf597000-0xdfffffff]
[    0.257631] e820: reserve RAM buffer [mem 0xdf599000-0xdfffffff]
[    0.257632] e820: reserve RAM buffer [mem 0xdf5c8000-0xdfffffff]
[    0.257634] e820: reserve RAM buffer [mem 0xdf72b000-0xdfffffff]
[    0.257635] e820: reserve RAM buffer [mem 0xdf795000-0xdfffffff]
[    0.257637] e820: reserve RAM buffer [mem 0xdf7fd000-0xdfffffff]
[    0.257638] e820: reserve RAM buffer [mem 0x21f800000-0x21fffffff]
[    0.257760] NetLabel: Initializing
[    0.257761] NetLabel:  domain hash size = 128
[    0.257761] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.257785] NetLabel:  unlabeled traffic allowed by default
[    0.260465] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.260470] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.262512] clocksource: Switched to clocksource tsc-early
[    0.276181] *** VALIDATE bpf ***
[    0.276268] VFS: Disk quotas dquot_6.6.0
[    0.276294] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.276328] *** VALIDATE ramfs ***
[    0.276333] *** VALIDATE hugetlbfs ***
[    0.276446] AppArmor: AppArmor Filesystem Enabled
[    0.276479] pnp: PnP ACPI init
[    0.276728] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.276731] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.276733] system 00:00: [io  0xffff] has been reserved
[    0.276734] system 00:00: [io  0xffff] has been reserved
[    0.276736] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.276737] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.276739] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.276741] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.276748] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.276783] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.276849] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.276854] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.276906] system 00:03: [io  0x0240-0x0259] has been reserved
[    0.276911] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.277001] pnp 00:04: Plug and Play ACPI device, IDs SYN0a17 SYN0a00 SYN0002 PNP0f13 (active)
[    0.277050] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.277413] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.277416] system 00:06: [mem 0xfed10000-0xfed17fff] could not be reserved
[    0.277417] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.277419] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.277421] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.277423] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.277424] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.277426] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.277428] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.277430] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.277435] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.277681] pnp: PnP ACPI: found 7 devices
[    0.279395] thermal_sys: Registered thermal governor 'fair_share'
[    0.279396] thermal_sys: Registered thermal governor 'bang_bang'
[    0.279397] thermal_sys: Registered thermal governor 'step_wise'
[    0.279398] thermal_sys: Registered thermal governor 'user_space'
[    0.279399] thermal_sys: Registered thermal governor 'power_allocator'
[    0.283906] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.283956] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.283959] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.283963] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf40fffff]
[    0.283965] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xebffffff 64bit pref]
[    0.283969] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.283972] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    0.283978] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf69fffff]
[    0.283982] pci 0000:00:1c.0:   bridge window [mem 0xee200000-0xeebfffff 64bit pref]
[    0.283989] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.283992] pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
[    0.283998] pci 0000:00:1c.1:   bridge window [mem 0xf5600000-0xf5ffffff]
[    0.284002] pci 0000:00:1c.1:   bridge window [mem 0xed700000-0xee0fffff 64bit pref]
[    0.284009] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.284012] pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
[    0.284017] pci 0000:00:1c.3:   bridge window [mem 0xf4c00000-0xf55fffff]
[    0.284022] pci 0000:00:1c.3:   bridge window [mem 0xecc00000-0xed5fffff 64bit pref]
[    0.284029] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.284032] pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
[    0.284037] pci 0000:00:1c.5:   bridge window [mem 0xf4200000-0xf4bfffff]
[    0.284042] pci 0000:00:1c.5:   bridge window [mem 0xec100000-0xecafffff 64bit pref]
[    0.284050] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.284051] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.284053] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.284054] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.284055] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.284057] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.284058] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.284060] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.284061] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.284063] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.284064] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window]
[    0.284066] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.284067] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf40fffff]
[    0.284068] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xebffffff 64bit pref]
[    0.284070] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.284071] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf69fffff]
[    0.284073] pci_bus 0000:02: resource 2 [mem 0xee200000-0xeebfffff 64bit pref]
[    0.284074] pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
[    0.284075] pci_bus 0000:03: resource 1 [mem 0xf5600000-0xf5ffffff]
[    0.284077] pci_bus 0000:03: resource 2 [mem 0xed700000-0xee0fffff 64bit pref]
[    0.284078] pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
[    0.284080] pci_bus 0000:04: resource 1 [mem 0xf4c00000-0xf55fffff]
[    0.284081] pci_bus 0000:04: resource 2 [mem 0xecc00000-0xed5fffff 64bit pref]
[    0.284082] pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
[    0.284084] pci_bus 0000:05: resource 1 [mem 0xf4200000-0xf4bfffff]
[    0.284085] pci_bus 0000:05: resource 2 [mem 0xec100000-0xecafffff 64bit pref]
[    0.284231] NET: Registered protocol family 2
[    0.284357] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.285932] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.285998] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.286215] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.286346] TCP: Hash tables configured (established 65536 bind 65536)
[    0.286406] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.286444] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.286536] NET: Registered protocol family 1
[    0.286542] NET: Registered protocol family 44
[    0.619612] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x670 took 325242 usecs
[    1.051599] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x670 took 421837 usecs
[    1.051624] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.051636] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    1.051943] PCI: CLS 64 bytes, default 64
[    1.052002] Trying to unpack rootfs image as initramfs...
[    1.319369] Freeing initrd memory: 80964K
[    1.319434] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.319436] software IO TLB: mapped [mem 0xdb40f000-0xdf40f000] (64MB)
[    1.319779] check: Scanning for low memory corruption every 60 seconds
[    1.320455] Initialise system trusted keyrings
[    1.320469] Key type blacklist registered
[    1.320502] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.322238] zbud: loaded
[    1.322718] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.322908] fuse: init (API version 7.31)
[    1.322931] *** VALIDATE fuse ***
[    1.322933] *** VALIDATE fuse ***
[    1.323067] Platform Keyring initialized
[    1.328055] Key type asymmetric registered
[    1.328056] Asymmetric key parser 'x509' registered
[    1.328065] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.328110] io scheduler mq-deadline registered
[    1.328524] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[    1.328775] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[    1.329035] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
[    1.329183] pcieport 0000:00:1c.3: PME: Signaling with IRQ 27
[    1.329434] pcieport 0000:00:1c.5: PME: Signaling with IRQ 28
[    1.329523] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.329593] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    1.329594] vesafb: scrolling: redraw
[    1.329596] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.329610] vesafb: framebuffer at 0xe9000000, mapped to 0x(____ptrval____), using 1216k, total 1216k
[    1.329652] fbcon: Deferring console take-over
[    1.329654] fb0: VESA VGA frame buffer device
[    1.329669] intel_idle: MWAIT substates: 0x21120
[    1.329670] intel_idle: v0.4.1 model 0x2A
[    1.330132] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.330321] ACPI: AC Adapter [AC0] (on-line)
[    1.330397] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.330419] ACPI: Lid Switch [LID]
[    1.330456] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.330502] ACPI: Sleep Button [SLPB]
[    1.330541] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.330571] ACPI: Power Button [PWRF]
[    1.332752] thermal LNXTHERM:00: registered as thermal_zone0
[    1.332753] ACPI: Thermal Zone [THRM] (44 C)
[    1.332983] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.336026] Linux agpgart interface v0.103
[    1.378294] battery: ACPI: Battery Slot [BAT0] (battery present)
[    1.543587] loop: module loaded
[    1.543907] libphy: Fixed MDIO Bus: probed
[    1.543908] tun: Universal TUN/TAP device driver, 1.6
[    1.543952] PPP generic driver version 2.4.2
[    1.544033] VFIO - User Level meta-driver version: 0.3
[    1.544267] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.544273] ehci-pci: EHCI PCI platform driver
[    1.544483] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.544490] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.544506] ehci-pci 0000:00:1a.0: debug port 2
[    1.548408] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.548425] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf6a08000
[    1.563507] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.563629] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.563631] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.563633] usb usb1: Product: EHCI Host Controller
[    1.563634] usb usb1: Manufacturer: Linux 5.4.0-89-generic ehci_hcd
[    1.563635] usb usb1: SerialNumber: 0000:00:1a.0
[    1.563815] hub 1-0:1.0: USB hub found
[    1.563823] hub 1-0:1.0: 6 ports detected
[    1.564247] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.564253] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.564267] ehci-pci 0000:00:1d.0: debug port 2
[    1.568183] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.568201] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf6a07000
[    1.583508] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.583624] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.583626] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.583628] usb usb2: Product: EHCI Host Controller
[    1.583629] usb usb2: Manufacturer: Linux 5.4.0-89-generic ehci_hcd
[    1.583630] usb usb2: SerialNumber: 0000:00:1d.0
[    1.583811] hub 2-0:1.0: USB hub found
[    1.583820] hub 2-0:1.0: 8 ports detected
[    1.584092] ehci-platform: EHCI generic platform driver
[    1.584113] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.584117] ohci-pci: OHCI PCI platform driver
[    1.584129] ohci-platform: OHCI generic platform driver
[    1.584137] uhci_hcd: USB Universal Host Controller Interface driver
[    1.584302] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.584309] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    1.720163] xhci_hcd 0000:04:00.0: hcc params 0x200071b9 hci version 0x96 quirks 0x00000000000a0440
[    1.720342] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.720343] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.720345] usb usb3: Product: xHCI Host Controller
[    1.720346] usb usb3: Manufacturer: Linux 5.4.0-89-generic xhci-hcd
[    1.720348] usb usb3: SerialNumber: 0000:04:00.0
[    1.720562] hub 3-0:1.0: USB hub found
[    1.720574] hub 3-0:1.0: 1 port detected
[    1.720713] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.720717] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    1.720721] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[    1.720744] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.720770] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    1.720772] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.720773] usb usb4: Product: xHCI Host Controller
[    1.720775] usb usb4: Manufacturer: Linux 5.4.0-89-generic xhci-hcd
[    1.720776] usb usb4: SerialNumber: 0000:04:00.0
[    1.720974] hub 4-0:1.0: USB hub found
[    1.720986] hub 4-0:1.0: 1 port detected
[    1.721122] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.722956] i8042: Detected active multiplexing controller, rev 1.1
[    1.723798] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.723803] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.723836] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.723862] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.723887] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.724191] mousedev: PS/2 mouse device common for all mice
[    1.724707] rtc_cmos 00:01: RTC can wake from S4
[    1.725025] rtc_cmos 00:01: registered as rtc0
[    1.725047] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.725056] i2c /dev entries driver
[    1.725114] device-mapper: uevent: version 1.0.3
[    1.725253] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    1.725276] platform eisa.0: Probing EISA bus 0
[    1.725278] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.725280] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.725281] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.725282] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.725283] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.725285] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.725286] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.725287] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.725288] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.725290] platform eisa.0: EISA: Detected 0 cards
[    1.725296] intel_pstate: Intel P-state driver initializing
[    1.726168] ledtrig-cpu: registered to indicate activity on CPUs
[    1.726237] drop_monitor: Initializing network drop monitor service
[    1.726402] NET: Registered protocol family 10
[    1.733798] Segment Routing with IPv6
[    1.733820] NET: Registered protocol family 17
[    1.733921] Key type dns_resolver registered
[    1.734510] RAS: Correctable Errors collector initialized.
[    1.734559] microcode: sig=0x206a7, pf=0x10, revision=0x2f
[    1.734700] microcode: Microcode Update Driver: v2.2.
[    1.734704] IPI shorthand broadcast: enabled
[    1.734711] sched_clock: Marking stable (1734412125, 283846)->(2018583270, -283887299)
[    1.734883] registered taskstats version 1
[    1.734892] Loading compiled-in X.509 certificates
[    1.735851] Loaded X.509 cert 'Build time autogenerated kernel key: 6de7ad59885645b611aa8f413e9db545247a2774'
[    1.736690] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    1.737523] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    1.737560] zswap: loaded using pool lzo/zbud
[    1.737714] Key type ._fscrypt registered
[    1.737714] Key type .fscrypt registered
[    1.744183] Key type big_key registered
[    1.747000] Key type encrypted registered
[    1.747003] AppArmor: AppArmor sha1 policy hashing enabled
[    1.747010] ima: No TPM chip found, activating TPM-bypass!
[    1.747013] ima: Allocated hash algorithm: sha1
[    1.747019] ima: No architecture policies found
[    1.747026] evm: Initialising EVM extended attributes:
[    1.747027] evm: security.selinux
[    1.747027] evm: security.SMACK64
[    1.747028] evm: security.SMACK64EXEC
[    1.747028] evm: security.SMACK64TRANSMUTE
[    1.747028] evm: security.SMACK64MMAP
[    1.747029] evm: security.apparmor
[    1.747029] evm: security.ima
[    1.747030] evm: security.capability
[    1.747030] evm: HMAC attrs: 0x1
[    1.747424] PM:   Magic number: 13:652:263
[    1.747572] rtc_cmos 00:01: setting system clock to 2021-11-05T05:17:41 UTC (1636089461)
[    1.748885] Freeing unused decrypted memory: 2040K
[    1.749347] Freeing unused kernel image memory: 2728K
[    1.761774] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.823523] Write protecting the kernel read-only data: 22528k
[    1.824193] Freeing unused kernel image memory: 2008K
[    1.824452] Freeing unused kernel image memory: 1128K
[    1.834973] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.834974] x86/mm: Checking user space page tables
[    1.844911] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.844913] Run /init as init process
[    1.887399] tsc: Refined TSC clocksource calibration: 1995.469 MHz
[    1.887407] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.887409] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3986eb93589, max_idle_ns: 881590438217 ns
[    1.899107] clocksource: Switched to clocksource tsc
[    1.899109] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.052205] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    2.052207] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.052257] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    2.052258] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.052525] hub 2-1:1.0: USB hub found
[    2.052556] hub 1-1:1.0: USB hub found
[    2.052587] hub 2-1:1.0: 6 ports detected
[    2.052730] hub 1-1:1.0: 6 ports detected
[    2.076797] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.080648] acpi device:02: registered as cooling_device8
[    2.082355] acpi device:04: registered as cooling_device9
[    2.082467] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input8
[    2.089080] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20190816/utaddress-204)
[    2.089089] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
[    2.089095] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.089099] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20190816/utaddress-204)
[    2.089104] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20190816/utaddress-204)
[    2.089108] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.089109] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20190816/utaddress-204)
[    2.089114] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20190816/utaddress-204)
[    2.089118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.089119] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20190816/utaddress-204)
[    2.089123] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20190816/utaddress-204)
[    2.089128] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.089129] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.089982] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.091870] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.092240] ahci 0000:00:1f.2: version 3.0
[    2.098004] libphy: r8169: probed
[    2.098626] r8169 0000:05:00.0 eth0: RTL8168e/8111e, 14:da:e9:4b:f7:78, XID 2c2, IRQ 29
[    2.098630] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.102591] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    2.102596] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    2.103729] cryptd: max_cpu_qlen set to 1000
[    2.114452] AVX version of gcm_enc/dec engaged.
[    2.114453] AES CTR mode by8 optimization enabled
[    2.117558] scsi host0: ahci
[    2.120540] scsi host1: ahci
[    2.120704] scsi host2: ahci
[    2.120834] scsi host3: ahci
[    2.121006] scsi host4: ahci
[    2.122860] r8169 0000:05:00.0 enp5s0: renamed from eth0
[    2.123484] scsi host5: ahci
[    2.123554] ata1: SATA max UDMA/133 abar m2048@0xf6a06000 port 0xf6a06100 irq 30
[    2.123555] ata2: DUMMY
[    2.123558] ata3: SATA max UDMA/133 abar m2048@0xf6a06000 port 0xf6a06200 irq 30
[    2.123559] ata4: DUMMY
[    2.123559] ata5: DUMMY
[    2.123560] ata6: DUMMY
[    2.186219] ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59)
[    2.186242] ACPI: \_SB_.PCI0.PEG0.GFX0: failed to evaluate _DSM
[    2.186384] checking generic (e9000000 130000) vs hw (e0000000 8000000)
[    2.186385] checking generic (e9000000 130000) vs hw (e8000000 4000000)
[    2.186386] fb0: switching to nouveaufb from VESA VGA
[    2.186515] nouveau 0000:01:00.0: NVIDIA GF116 (0cf880a1)
[    2.314439] nouveau 0000:01:00.0: bios: version 70.26.29.00.0c
[    2.337229] nouveau 0000:01:00.0: fb: 3072 MiB GDDR5
[    2.343406] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    2.397123] [TTM] Zone  kernel: Available graphics memory: 4063608 KiB
[    2.397124] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    2.397125] [TTM] Initializing pool allocator
[    2.397128] [TTM] Initializing DMA pool allocator
[    2.397149] nouveau 0000:01:00.0: DRM: VRAM: 3072 MiB
[    2.397150] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    2.397152] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    2.397154] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    2.397155] nouveau 0000:01:00.0: DRM: DCB outp 00: 01800323 00010034
[    2.397157] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011300 00000000
[    2.397158] nouveau 0000:01:00.0: DRM: DCB outp 02: 08022382 00020010
[    2.397159] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040
[    2.397160] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[    2.397161] nouveau 0000:01:00.0: DRM: DCB conn 02: 00010261
[    2.397890] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    2.398414] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.398414] [drm] Driver supports precise vblank timestamp query.
[    2.436418] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.438732] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.438777] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.438861] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.438862] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.439371] ata1.00: ATA-10: WDC WD10SPSX-00A6WT0, 01.01A01, max UDMA/133
[    2.439372] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.440291] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.440602] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.440604] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.440862] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.440864] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.441231] ata1.00: configured for UDMA/133
[    2.441587] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10SPSX-00A 1A01 PQ: 0 ANSI: 5
[    2.441874] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.442003] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.442006] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.442022] sd 0:0:0:0: [sda] Write Protect is off
[    2.442024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.442048] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.442352] ata3.00: ATAPI: HL-DT-STDVDRAM GT34N, AS00, max UDMA/100
[    2.444726] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.444728] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.446287] ata3.00: configured for UDMA/100
[    2.458991] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT34N     AS00 PQ: 0 ANSI: 5
[    2.491893] nouveau 0000:01:00.0: DRM: allocated 1600x900 fb: 0x60000, bo (____ptrval____)
[    2.491988] fbcon: nouveaudrmfb (fb0) is primary device
[    2.491989] fbcon: Deferring console take-over
[    2.491991] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device
[    2.507720] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    2.554258] random: fast init done
[    2.563319] usb 1-1.2: New USB device found, idVendor=1bcf, idProduct=2885, bcdDevice= 4.29
[    2.563321] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.563322] usb 1-1.2: Product: ASUS USB2.0 Webcam
[    2.563323] usb 1-1.2: Manufacturer: 04G626000610B816A000NP8
[    2.563526] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.563534] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.563550] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.566077] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.566079] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.603600] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.603774] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.639817]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    2.660345] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.815519] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    2.925224] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0139, bcdDevice=39.60
[    2.925226] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.925228] usb 1-1.4: Product: USB2.0-CRW
[    2.925229] usb 1-1.4: Manufacturer: Generic
[    2.925230] usb 1-1.4: SerialNumber: 20100201396000000
[    2.930523] usbcore: registered new interface driver rtsx_usb
[    3.707404] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    6.018337] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    6.272944] systemd[1]: Inserted module 'autofs4'
[    6.358376] systemd[1]: systemd 245.4-4ubuntu3.13 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    6.375644] systemd[1]: Detected architecture x86-64.
[    6.423316] systemd[1]: Set hostname to <Izgrev>.
[    6.790931] random: crng init done
[    6.790941] random: 7 urandom warning(s) missed due to ratelimiting
[    7.615055] systemd[1]: Created slice system-modprobe.slice.
[    7.615304] systemd[1]: Created slice User and Session Slice.
[    7.615374] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.615608] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.615654] systemd[1]: Reached target User and Group Name Lookups.
[    7.615668] systemd[1]: Reached target Remote File Systems.
[    7.615681] systemd[1]: Reached target Slices.
[    7.628988] systemd[1]: Listening on Syslog Socket.
[    7.629128] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.629191] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    7.629387] systemd[1]: Listening on Journal Audit Socket.
[    7.629478] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.629591] systemd[1]: Listening on Journal Socket.
[    7.629697] systemd[1]: Listening on udev Control Socket.
[    7.629775] systemd[1]: Listening on udev Kernel Socket.
[    7.630711] systemd[1]: Mounting Huge Pages File System...
[    7.631706] systemd[1]: Mounting POSIX Message Queue File System...
[    7.632635] systemd[1]: Mounting Kernel Debug File System...
[    7.633635] systemd[1]: Mounting Kernel Trace File System...
[    7.635470] systemd[1]: Starting Journal Service...
[    7.636449] systemd[1]: Starting Set the console keyboard layout...
[    7.637530] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    7.637587] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    7.660478] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    7.660527] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    7.676140] systemd[1]: Starting Load Kernel Modules...
[    7.676931] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.677910] systemd[1]: Starting udev Coldplug all Devices...
[    7.679129] systemd[1]: Starting Uncomplicated firewall...
[    7.680717] systemd[1]: Mounted Huge Pages File System.
[    7.680926] systemd[1]: Mounted POSIX Message Queue File System.
[    7.681108] systemd[1]: Mounted Kernel Debug File System.
[    7.681293] systemd[1]: Mounted Kernel Trace File System.
[    7.690430] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    7.771160] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[    7.772556] systemd[1]: Finished Remount Root and Kernel File Systems.
[    7.773307] systemd[1]: Finished Uncomplicated firewall.
[    7.782069] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    7.782128] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    7.783077] systemd[1]: Starting Load/Save Random Seed...
[    7.784052] systemd[1]: Starting Create System Users...
[    7.856246] systemd[1]: Started Journal Service.
[    7.944935] systemd-journald[365]: Received client request to flush runtime journal.
[    8.268575] lp: driver loaded but no devices found
[    8.364841] ppdev: user-space parallel port driver
[   10.093269] audit: type=1400 audit(1636085869.842:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=410 comm="apparmor_parser"
[   10.125391] audit: type=1400 audit(1636085869.874:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=408 comm="apparmor_parser"
[   10.137220] audit: type=1400 audit(1636085869.886:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=414 comm="apparmor_parser"
[   10.137224] audit: type=1400 audit(1636085869.886:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=414 comm="apparmor_parser"
[   10.191272] audit: type=1400 audit(1636085869.938:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=411 comm="apparmor_parser"
[   10.210387] audit: type=1400 audit(1636085869.958:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=418 comm="apparmor_parser"
[   10.211574] audit: type=1400 audit(1636085869.962:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=417 comm="apparmor_parser"
[   10.211744] audit: type=1400 audit(1636085869.962:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=413 comm="apparmor_parser"
[   10.212270] audit: type=1400 audit(1636085869.962:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=415 comm="apparmor_parser"
[   10.212275] audit: type=1400 audit(1636085869.962:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=415 comm="apparmor_parser"
[   11.055168] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[   11.055171] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   11.055172] RAPL PMU: hw unit of domain package 2^-16 Joules
[   11.120596] asus_wmi: ASUS WMI generic driver loaded
[   11.282572] asus_wmi: Initialization: 0x1
[   11.282633] asus_wmi: BIOS WMI version: 7.6
[   11.282712] asus_wmi: SFUN value: 0xa0877
[   11.282715] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[   11.282716] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[   11.284204] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input13
[   11.575947] intel_rapl_common: Found RAPL domain package
[   11.575948] intel_rapl_common: Found RAPL domain core
[   11.620159] snd_hda_intel 0000:01:00.1: Disabling MSI
[   11.620164] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   11.663701] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   11.664231] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   11.746457] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
[   11.746459] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.746461] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   11.746462] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.746463] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   11.746463] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.746465] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   11.746466] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   11.753936] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   11.754032] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   11.831695] mc: Linux media interface: v0.10
[   11.901867] videodev: Linux video capture interface: v2.00
[   12.096354] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2885)
[   12.132790] input: ASUS USB2.0 Webcam: ASUS USB2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input16
[   12.132955] usbcore: registered new interface driver uvcvideo
[   12.132957] USB Video Class driver (1.1.1)
[   12.214193] ath: phy0: Enable LNA combining
[   12.216775] ath: phy0: ASPM enabled: 0x42
[   12.216777] ath: EEPROM regdomain: 0x60
[   12.216777] ath: EEPROM indicates we should expect a direct regpair map
[   12.216779] ath: Country alpha2 being used: 00
[   12.216779] ath: Regpair used: 0x60
[   12.218441] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.218944] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffa5d8409f0000, irq=17
[   12.312853] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[   12.884395] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[   12.884478] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[   12.884551] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[   12.884621] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[   15.475518] Adding 3998716k swap on /dev/sda6.  Priority:-2 extents:1 across:3998716k FS
[   20.655506] usb 2-1.4: new low-speed USB device number 3 using ehci-pci
[   20.767999] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[   20.768007] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   20.768011] usb 2-1.4: Product: USB OPTICAL MOUSE
[   20.768015] usb 2-1.4: Manufacturer: PIXART
[   21.051267] hidraw: raw HID events driver (C) Jiri Kosina
[   21.091654] usbcore: registered new interface driver usbhid
[   21.091655] usbhid: USB HID core driver
[   21.137022] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.0001/input/input21
[   21.137354] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[   21.821801] usb 2-1.4: USB disconnect, device number 3
[   22.099407] usb 2-1.4: new low-speed USB device number 4 using ehci-pci
[   22.211981] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[   22.211988] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   22.211992] usb 2-1.4: Product: USB OPTICAL MOUSE
[   22.211996] usb 2-1.4: Manufacturer: PIXART
[   22.215893] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.0002/input/input22
[   22.216068] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[   23.824115] kauditd_printk_skb: 14 callbacks suppressed
[   23.824117] audit: type=1400 audit(1636085883.574:26): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=760 comm="cups-browsed" capability=23  capname="sys_nice"
[   23.869526] usb 2-1.4: USB disconnect, device number 4
[   24.151515] usb 2-1.4: new low-speed USB device number 5 using ehci-pci
[   24.264136] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[   24.264144] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   24.264148] usb 2-1.4: Product: USB OPTICAL MOUSE
[   24.264152] usb 2-1.4: Manufacturer: PIXART
[   24.271009] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.0003/input/input23
[   24.271241] hid-generic 0003:093A:2510.0003: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[   24.402871] RTL8211DN Gigabit Ethernet r8169-0-500:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-500:00, irq=IGNORE)
[   24.628585] r8169 0000:05:00.0 enp5s0: Link is Down
[  388.666764] usb 2-1.4: USB disconnect, device number 5
[  388.939488] usb 2-1.4: new low-speed USB device number 6 using ehci-pci
[  389.052312] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[  389.052320] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  389.052324] usb 2-1.4: Product: USB OPTICAL MOUSE
[  389.052328] usb 2-1.4: Manufacturer: PIXART
[  389.057279] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.0004/input/input24
[  389.057715] hid-generic 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[  389.946624] usb 2-1.4: USB disconnect, device number 6
[  390.227398] usb 2-1.4: new low-speed USB device number 7 using ehci-pci
[  390.339495] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[  390.339497] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  390.339498] usb 2-1.4: Product: USB OPTICAL MOUSE
[  390.339499] usb 2-1.4: Manufacturer: PIXART
[  390.343327] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.0005/input/input25
[  390.343652] hid-generic 0003:093A:2510.0005: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[ 3613.491791] audit: type=1400 audit(1636089473.242:27): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1904 comm="cups-browsed" capability=23  capname="sys_nice"
[ 4591.181498] wlp3s0: authenticate with a8:a1:98:da:b7:7c
[ 4591.195088] wlp3s0: send auth to a8:a1:98:da:b7:7c (try 1/3)
[ 4591.197786] wlp3s0: authenticated
[ 4591.199178] wlp3s0: associate with a8:a1:98:da:b7:7c (try 1/3)
[ 4591.209191] wlp3s0: RX AssocResp from a8:a1:98:da:b7:7c (capab=0x411 status=0 aid=2)
[ 4591.209399] wlp3s0: associated
[ 4591.245624] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 4887.575331] usb 2-1.4: USB disconnect, device number 7
[ 4887.895248] usb 2-1.4: new low-speed USB device number 8 using ehci-pci
[ 4888.008265] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 4888.008273] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4888.008277] usb 2-1.4: Product: USB OPTICAL MOUSE
[ 4888.008280] usb 2-1.4: Manufacturer: PIXART
[ 4888.013048] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.0006/input/input26
[ 4888.013555] hid-generic 0003:093A:2510.0006: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[ 4911.464122] asus_wmi: Unknown key 34 pressed
[ 5751.567987] usb 2-1-port4: disabled by hub (EMI?), re-enabling...
[ 5751.568004] usb 2-1.4: USB disconnect, device number 8
[ 5751.847199] usb 2-1.4: new low-speed USB device number 9 using ehci-pci
[ 5757.319192] usb 2-1.4: device descriptor read/64, error -32
[ 5757.539946] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 5757.539954] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5757.539958] usb 2-1.4: Product: USB OPTICAL MOUSE
[ 5757.539961] usb 2-1.4: Manufacturer: PIXART
[ 5757.546396] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.0007/input/input27
[ 5757.546768] hid-generic 0003:093A:2510.0007: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[ 5768.207995] usb 2-1-port4: disabled by hub (EMI?), re-enabling...
[ 5768.208013] usb 2-1.4: USB disconnect, device number 9
[ 5768.483201] usb 2-1.4: new low-speed USB device number 10 using ehci-pci
[ 5768.596289] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 5768.596297] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5768.596301] usb 2-1.4: Product: USB OPTICAL MOUSE
[ 5768.596305] usb 2-1.4: Manufacturer: PIXART
[ 5768.601121] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.0008/input/input28
[ 5768.601830] hid-generic 0003:093A:2510.0008: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[ 7327.747400] usb 2-1-port4: disabled by hub (EMI?), re-enabling...
[ 7327.747418] usb 2-1.4: USB disconnect, device number 10
[ 7328.195112] usb 2-1.4: new low-speed USB device number 11 using ehci-pci
[ 7328.315633] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 7328.315641] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7328.316483] usb 2-1.4: can't set config #1, error -32
[ 7328.515431] usb 2-1.4: USB disconnect, device number 11
[ 7328.739114] usb 2-1.4: new low-speed USB device number 12 using ehci-pci
[ 7328.851780] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 7328.851787] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7328.851791] usb 2-1.4: Product: USB OPTICAL MOUSE
[ 7328.851795] usb 2-1.4: Manufacturer: PIXART
[ 7328.856559] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.0009/input/input29
[ 7328.857417] hid-generic 0003:093A:2510.0009: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[ 7329.539217] usb 2-1.4: USB disconnect, device number 12
[ 7329.811073] usb 2-1.4: new low-speed USB device number 13 using ehci-pci
[ 7330.307121] usb 2-1.4: device not accepting address 13, error -32
[ 7330.595103] usb 2-1.4: new low-speed USB device number 14 using ehci-pci
[ 7331.091090] usb 2-1.4: device not accepting address 14, error -32
[ 7331.091224] usb 2-1-port4: attempt power cycle
[ 7331.903107] usb 2-1.4: new low-speed USB device number 15 using ehci-pci
[ 7331.936307] usb 2-1.4: unable to read config index 0 descriptor/all
[ 7331.936320] usb 2-1.4: can't read configurations, error -32
[ 7332.223097] usb 2-1.4: new low-speed USB device number 16 using ehci-pci
[ 7332.256375] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 7332.256382] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7332.256386] usb 2-1.4: Product: USB OPTICAL MOUSE
[ 7332.256390] usb 2-1.4: Manufacturer: PIXART
[ 7332.261154] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.000A/input/input30
[ 7332.261768] hid-generic 0003:093A:2510.000A: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[ 7332.611168] usb 2-1-port4: disabled by hub (EMI?), re-enabling...
[ 7332.611185] usb 2-1.4: USB disconnect, device number 16
[ 7332.883009] usb 2-1.4: new low-speed USB device number 17 using ehci-pci
[ 7332.995337] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 7332.995342] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7332.995345] usb 2-1.4: Product: USB OPTICAL MOUSE
[ 7332.995348] usb 2-1.4: Manufacturer: PIXART
[ 7332.999751] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.000B/input/input31
[ 7333.000511] hid-generic 0003:093A:2510.000B: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[ 7352.323215] usb 2-1.4: USB disconnect, device number 17
[ 7352.583118] usb 2-1.4: new low-speed USB device number 18 using ehci-pci
[ 7352.695639] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 7352.695647] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7352.695651] usb 2-1.4: Product: USB OPTICAL MOUSE
[ 7352.695655] usb 2-1.4: Manufacturer: PIXART
[ 7352.700381] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.000C/input/input32
[ 7352.701246] hid-generic 0003:093A:2510.000C: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[ 7414.264255] asus_wmi: Unknown key 33 pressed
[ 7455.234393] usb 2-1.4: USB disconnect, device number 18
[ 7456.563095] usb 2-1.4: new low-speed USB device number 19 using ehci-pci
[ 7456.675673] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 7456.675681] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7456.675685] usb 2-1.4: Product: USB OPTICAL MOUSE
[ 7456.675688] usb 2-1.4: Manufacturer: PIXART
[ 7456.680464] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.000D/input/input33
[ 7456.681288] hid-generic 0003:093A:2510.000D: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[ 7481.659098] usb 2-1-port4: disabled by hub (EMI?), re-enabling...
[ 7481.659115] usb 2-1.4: USB disconnect, device number 19
[ 7481.931111] usb 2-1.4: new low-speed USB device number 20 using ehci-pci
[ 7482.043649] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 7482.043657] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7482.043661] usb 2-1.4: Product: USB OPTICAL MOUSE
[ 7482.043665] usb 2-1.4: Manufacturer: PIXART
[ 7482.048483] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.000E/input/input34
[ 7482.049329] hid-generic 0003:093A:2510.000E: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[ 7482.939021] usb 2-1.4: USB disconnect, device number 20
[ 7483.219110] usb 2-1.4: new low-speed USB device number 21 using ehci-pci
[ 7483.331881] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 7483.331889] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7483.331893] usb 2-1.4: Product: USB OPTICAL MOUSE
[ 7483.331897] usb 2-1.4: Manufacturer: PIXART
[ 7483.336853] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.000F/input/input35
[ 7483.337658] hid-generic 0003:093A:2510.000F: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[ 7484.219003] usb 2-1.4: USB disconnect, device number 21
[ 7484.743110] usb 2-1.4: new low-speed USB device number 22 using ehci-pci
[ 7484.855503] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 7484.855511] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7484.855515] usb 2-1.4: Product: USB OPTICAL MOUSE
[ 7484.855519] usb 2-1.4: Manufacturer: PIXART
[ 7484.860476] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.0010/input/input36
[ 7484.861077] hid-generic 0003:093A:2510.0010: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0
[ 7544.890592] usb 2-1.4: USB disconnect, device number 22
[ 7546.415078] usb 2-1.4: new low-speed USB device number 23 using ehci-pci
[ 7546.528128] usb 2-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 7546.528135] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7546.528140] usb 2-1.4: Product: USB OPTICAL MOUSE
[ 7546.528143] usb 2-1.4: Manufacturer: PIXART
[ 7546.532895] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:093A:2510.0011/input/input37
[ 7546.533501] hid-generic 0003:093A:2510.0011: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.4/input0

lsusb

Bus 002 Device 023: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card Reader Controller
Bus 001 Device 003: ID 1bcf:2885 Sunplus Innovation Technology Inc. ASUS Webcam
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lspci

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GF116M [GeForce GT 560M] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1)
03:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
04:00.0 USB controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 04)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

Voila tout.

Qu'en pensez-vous?

Dernière modification par yayou (Le 08/11/2021, à 07:52)

Hors ligne