#1 Le 06/11/2021, à 13:14
- Chareuleneuh
[Résolu] Impossible d'imprimer sur HP 6200
Bonjour,
Je suis sur Ubuntu 18.04
Après le chargement du fichier HPLIP (Version: 3.21.10) pour l'installation d'une imprimante Epson 6200, il y a marqué "Le fichier que vous avez ouvert contient des caractères non valides. Si vous poursuivez l’édition du fichier, vous pourriez endommager ce document.
Vous pouvez aussi choisir un autre codage de caractères et essayer à nouveau.". J'essaye les différents codages de caractère proposés mais cela ne fonctionne toujours pas et indique : "Erreur inattendue : Séquence d'octets non valide dans le flux d'entrée de conversion".
Merci pour votre aide.
Dernière modification par Chareuleneuh (Le 30/11/2021, à 18:58)
Hors ligne
#2 Le 06/11/2021, à 13:21
- xubu1957
Re : [Résolu] Impossible d'imprimer sur HP 6200
Bonjour,
Il faudrait fournir > les Informations utiles à donner lorsque j'ai un problème.
Je crois que hplip est pour les imprimantes Hewlett-Packard.
_ _ _
La Doc tutoriel/installer_imprimante_epson
Dernière modification par xubu1957 (Le 06/11/2021, à 13:23)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#3 Le 06/11/2021, à 15:55
- Chareuleneuh
Re : [Résolu] Impossible d'imprimer sur HP 6200
Bonjour,
L'imprimante n'est pas connecté à mon ordinateur. Il n'y a pas de câble pour. Elle est par contre connectée à la wifi de mon téléphone. Pour pouvoir connecté mon imprimante à mon ordinateur je peux passer par la wifi de mon ordi mais on me demande un mot de passe pour avoir accès à l'imprimante et je ne le trouve nul par.
J'ai essayé de télécharger hplip car l'agent virtuel de HP (eh oui...) me la conseillé pour résoudre mon problème d'installation
cha@george:~$ cat /etc/lsb-release && uname -ir && groups && lsusb
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.10
DISTRIB_CODENAME=cosmic
DISTRIB_DESCRIPTION="Ubuntu 18.10"
4.18.0-25-generic x86_64
cha adm cdrom sudo dip plugdev lpadmin sambashare
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b2e3 Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 012: ID 1782:5d20 Spreadtrum Communications Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubcha@george:~$ dpkg -l | grep hplip
ii hplip 3.18.7+dfsg1-2ubuntu2 amd64 HP Linux Printing and Imaging System (HPLIP)
ii hplip-data 3.18.7+dfsg1-2ubuntu2 all HP Linux Printing and Imaging - data filescha@george:~$ hp-check
Saving output in log file: /home/cha/hp-check.log
HP Linux Imaging and Printing System (ver. 3.18.7)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: ubuntu-18.10 version is not supported. Using ubuntu-18.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.18.0-25-generic #26-Ubuntu SMP Mon Jun 24 09:32:08 UTC 2019 GNU/Linux
Host: george
Proc: 4.18.0-25-generic #26-Ubuntu SMP Mon Jun 24 09:32:08 UTC 2019 GNU/Linux
Distribution: ubuntu 18.10
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.18.7
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 18.10 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.18.7
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.18.7
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 11/06/21 14:48:50
version = 3.18.7
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.10 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.19.5 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
error: libpthread libpthread - POSIX threads library REQUIRED - b'2.28' MISSING 'libpthread needs to be installed'
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.8 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.8 OK -
python3-xml Python XML libraries REQUIRED - 2.2.6 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.6.8 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.6 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed'
error: make make - GNU make utility to maintain groups of programs REQUIRED 3.0 - MISSING 'make needs to be installed'
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.18.7 OK -
hpmudext IO-Extension REQUIRED - 3.18.7 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.18.7 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.18.7 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Type: Unknown
Device URI: usb://EPSON/Stylus%20S22?serial=ME8Z115107%20%20%20%20%20%20%20%20
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'libssl-dev' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'xsane' package is missing/incompatible
error: 'python3-notify2' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 18
Total Warnings: 0
Done.cha@george:~$ dpkg -l | grep cups
ii bluez-cups 5.50-0ubuntu1 amd64 Bluetooth printer driver for CUPS
ii cups 2.2.8-5ubuntu1.4 amd64 Common UNIX Printing System(tm) - PPD/driver support, web interface
ii cups-browsed 1.21.3-1ubuntu0.1 amd64 OpenPrinting CUPS Filters - cups-browsed
ii cups-bsd 2.2.8-5ubuntu1.4 amd64 Common UNIX Printing System(tm) - BSD commands
ii cups-client 2.2.8-5ubuntu1.4 amd64 Common UNIX Printing System(tm) - client programs (SysV)
ii cups-common 2.2.8-5ubuntu1.4 all Common UNIX Printing System(tm) - common files
ii cups-core-drivers 2.2.8-5ubuntu1.4 amd64 Common UNIX Printing System(tm) - driverless printing
ii cups-daemon 2.2.8-5ubuntu1.4 amd64 Common UNIX Printing System(tm) - daemon
ii cups-filters 1.21.3-1ubuntu0.1 amd64 OpenPrinting CUPS Filters - Main Package
ii cups-filters-core-drivers 1.21.3-1ubuntu0.1 amd64 OpenPrinting CUPS Filters - Driverless printing
ii cups-ipp-utils 2.2.8-5ubuntu1.4 amd64 Common UNIX Printing System(tm) - IPP developer/admin utilities
ii cups-pk-helper 0.2.6-1ubuntu3 amd64 PolicyKit helper to configure cups with fine-grained privileges
ii cups-ppdc 2.2.8-5ubuntu1.4 amd64 Common UNIX Printing System(tm) - PPD manipulation utilities
ii cups-server-common 2.2.8-5ubuntu1.4 all Common UNIX Printing System(tm) - server common files
ii libcups2:amd64 2.2.8-5ubuntu1.4 amd64 Common UNIX Printing System(tm) - Core library
ii libcupscgi1:amd64 2.2.8-5ubuntu1.4 amd64 Common UNIX Printing System(tm) - CGI library
ii libcupsfilters1:amd64 1.21.3-1ubuntu0.1 amd64 OpenPrinting CUPS Filters - Shared library
ii libcupsimage2:amd64 2.2.8-5ubuntu1.4 amd64 Common UNIX Printing System(tm) - Raster image library
ii libcupsmime1:amd64 2.2.8-5ubuntu1.4 amd64 Common UNIX Printing System(tm) - MIME library
ii libcupsppdc1:amd64 2.2.8-5ubuntu1.4 amd64 Common UNIX Printing System(tm) - PPD manipulation library
ii printer-driver-hpcups 3.18.7+dfsg1-2ubuntu2 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii python3-cups 1.9.73-2build1 amd64 Python3 bindings for CUPS
ii python3-cupshelpers 1.5.11-2ubuntu1 all Python utility modules around the CUPS printing systemcha@george:~$ lpstat -t
scheduler is running
no system default destination
matériel pour Epson-Stylus-S22 : usb://EPSON/Stylus%20S22?serial=ME8Z115107%20%20%20%20%20%20%20%20
Epson-Stylus-S22 accepte des requêtes depuis sam. 09 mars 2019 16:22:15 CET
printer Epson-Stylus-S22 is idle. enabled since sam. 09 mars 2019 16:22:15 CETcha@george:~$ /usr/sbin/lpinfo -v
network beh
file cups-brf:/
network https
network socket
network ipp
direct hp
network http
network ipps
network lpd
direct hpfaxcha@george:~$ cat /var/log/cups/error_log
E [06/Nov/2021:14:34:05 +0100] [cups-deviced] PID 10808 (gutenprint53+usb) stopped with status 1!
E [06/Nov/2021:14:52:31 +0100] [cups-deviced] PID 11395 (gutenprint53+usb) stopped with status 1!cha@george:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom Version Architecture Description
+++-==========================================-==================================================-============-===============================================================================
rc linux-image-4.18.0-10-generic 4.18.0-10.11 amd64 Signed kernel image generic
rc linux-image-4.18.0-13-generic 4.18.0-13.14 amd64 Signed kernel image generic
rc linux-modules-4.18.0-10-generic 4.18.0-10.11 amd64 Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc linux-modules-4.18.0-13-generic 4.18.0-13.14 amd64 Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc linux-modules-extra-4.18.0-10-generic 4.18.0-10.11 amd64 Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc linux-modules-extra-4.18.0-13-generic 4.18.0-13.14 amd64 Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMPMerci:)
Hors ligne
#4 Le 06/11/2021, à 16:08
- xubu1957
Re : [Résolu] Impossible d'imprimer sur HP 6200
Vu :
DISTRIB_RELEASE=18.10
DISTRIB_CODENAME=cosmicet :
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 18.10 version Tu as une version cosmic périmée.
Depuis le 18 juillet 2019, Ubuntu 18.10 est en fin de vie (end of life, EOL). Elle ne profite plus de nouvelle mise à jour de sécurité et les paquets logiciels pour cette version sont déplacés dans des serveurs d'archive. Pour continuer à recevoir des mises à jour de sécurité, veuillez mettre à niveau votre version d'Ubuntu vers une version activement soutenue.
Dernière modification par xubu1957 (Le 06/11/2021, à 17:04)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#5 Le 24/11/2021, à 10:14
- Chareuleneuh
Re : [Résolu] Impossible d'imprimer sur HP 6200
Bonjour,
Mon ordinateur est maintenant sous Ubuntu 20.04.
L'imprimante ne fonctionne pourtant toujours pas...snif!
Lorsque j'ai à choisir l'imprimante, il y a inscrit "Récupération des données de l'imprimante" dans la barre "Etat de l'imprimante"
Pour info, l'imprimante est maintenant branché à l'ordi.
cha@george:~$ cat /etc/lsb-release && uname -ir && groups && lsusb
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.3 LTS"
5.4.0-90-generic x86_64
cha adm cdrom sudo dip plugdev lpadmin sambashare
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b2e3 Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 007: ID 1782:5d20 Spreadtrum Communications Inc. Unisoc Phone
Bus 003 Device 006: ID 03f0:1254 HP, Inc ENVY Photo 6200 series
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubcha@george:~$ dpkg -l | grep hplip
ii hplip 3.20.3+dfsg0-2 amd64 HP Linux Printing and Imaging System (HPLIP)
ii hplip-data 3.20.3+dfsg0-2 all HP Linux Printing and Imaging - data filescha@george:~$ hp-check
Saving output in log file: /home/cha/hp-check.log
HP Linux Imaging and Printing System (ver. 3.20.3)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.4.0-90-generic #101-Ubuntu SMP Fri Oct 15 20:00:55 UTC 2021 GNU/Linux
Host: george
Proc: 5.4.0-90-generic #101-Ubuntu SMP Fri Oct 15 20:00:55 UTC 2021 GNU/Linux
Distribution: ubuntu 20.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.3
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.3
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 11/24/21 09:06:52
version = 3.20.3
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
error: libpthread libpthread - POSIX threads library REQUIRED - b'2.31' MISSING 'libpthread needs to be installed'
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.10 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.10 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed'
error: make make - GNU make utility to maintain groups of programs REQUIRED 3.0 - MISSING 'make needs to be installed'
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.3 OK -
hpmudext IO-Extension REQUIRED - 3.20.3 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/usb/ENVY_Photo_6200_series?serial=TH177DV0JD' is a Hewlett-Packard ENVY_Photo_6200_series all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- -------------------------
hp:/usb/ENVY_Photo_6200_series?s HP ENVY Photo 6200 series
erial=TH177DV0JD
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
lpstat
------
Type: Unknown
Device URI: Aucune destination ajoutée.
--------------
| PERMISSION |
--------------
USB None Required - - OK Node:'/dev/bus/usb/003/006' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libusb-0.1-4' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'xsane' package is missing/incompatible
error: 'python3-notify2' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 18
Total Warnings: 0
Done.cha@george:~$ dpkg -l | grep cups
ii bluez-cups 5.53-0ubuntu3.3 amd64 Bluetooth printer driver for CUPS
ii cups 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - PPD/driver support, web interface
ii cups-browsed 1.27.4-1 amd64 OpenPrinting CUPS Filters - cups-browsed
ii cups-bsd 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - BSD commands
ii cups-client 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - client programs (SysV)
ii cups-common 2.3.1-9ubuntu1.1 all Common UNIX Printing System(tm) - common files
ii cups-core-drivers 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - driverless printing
ii cups-daemon 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - daemon
ii cups-filters 1.27.4-1 amd64 OpenPrinting CUPS Filters - Main Package
ii cups-filters-core-drivers 1.27.4-1 amd64 OpenPrinting CUPS Filters - Driverless printing
ii cups-ipp-utils 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - IPP developer/admin utilities
ii cups-pk-helper 0.2.6-1ubuntu3 amd64 PolicyKit helper to configure cups with fine-grained privileges
ii cups-ppdc 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - PPD manipulation utilities
ii cups-server-common 2.3.1-9ubuntu1.1 all Common UNIX Printing System(tm) - server common files
ii libcups2:amd64 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - Core library
ii libcupsfilters1:amd64 1.27.4-1 amd64 OpenPrinting CUPS Filters - Shared library
ii libcupsimage2:amd64 2.3.1-9ubuntu1.1 amd64 Common UNIX Printing System(tm) - Raster image library
ii printer-driver-hpcups 3.20.3+dfsg0-2 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii python3-cups 1.9.73-3build1 amd64 Python3 bindings for CUPS
ii python3-cupshelpers 1.5.12-0ubuntu1.1 all Python utility modules around the CUPS printing systemcha@george:~$ lpstat -t
scheduler is running
no system default destination
lpstat: Aucune destination ajoutée.
lpstat: Aucune destination ajoutée.
lpstat: Aucune destination ajoutée.
lpstat: Aucune destination ajoutée.cha@george:~$ /usr/sbin/lpinfo -v
network beh
file cups-brf:/
direct hp:/usb/ENVY_Photo_6200_series?serial=TH177DV0JD
network lpd
network socket
network ipp
network https
network ipps
network http
direct usb://HP/ENVY%20Photo%206200%20series?serial=TH177DV0JD&interface=1
direct hpfaxcha@george:~$ cat /var/log/cups/error_logcha@george:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom Version Architecture Description
+++-==========================================-=====================================-============-======================================================================================================
rc fonts-noto-hinted 20200323-1build1~ubuntu20.04.1 all obsolete metapackage to pull in a subset of Noto fonts
rc gnome-software 3.36.1-0ubuntu0.20.04.0 amd64 Software Center for GNOME
rc libsensors4:amd64 1:3.4.0-4 amd64 library to read temperature/voltage/fan sensors
rc libssl1.0.0:amd64 1.0.2n-1ubuntu6.2 amd64 Secure Sockets Layer toolkit - shared libraries
rc lintian 2.5.104 all Debian package checker
rc linux-image-4.18.0-10-generic 4.18.0-10.11 amd64 Signed kernel image generic
rc linux-image-4.18.0-13-generic 4.18.0-13.14 amd64 Signed kernel image generic
rc linux-image-4.18.0-17-generic 4.18.0-17.18 amd64 Signed kernel image generic
rc linux-modules-4.18.0-10-generic 4.18.0-10.11 amd64 Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc linux-modules-4.18.0-13-generic 4.18.0-13.14 amd64 Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc linux-modules-4.18.0-17-generic 4.18.0-17.18 amd64 Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc linux-modules-extra-4.18.0-10-generic 4.18.0-10.11 amd64 Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc linux-modules-extra-4.18.0-13-generic 4.18.0-13.14 amd64 Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc linux-modules-extra-4.18.0-17-generic 4.18.0-17.18 amd64 Linux kernel extra modules for version 4.18.0 on 64 bit x86 SMP
rc rarian-compat 0.8.1-6build1 amd64 Documentation meta-data library (compatibility tools)Merci à vous:)
Hors ligne
#6 Le 24/11/2021, à 10:17
- xubu1957
Re : [Résolu] Impossible d'imprimer sur HP 6200
Bonjour,
Avais-tu désinstallé le paquet ippusbxd ?
_ _ _
Pour nettoyer :
Le 11/02/2017, moko138 a écrit :
Pour supprimer tous ces fichiers de configuration devenus sans objets et marqués "rc", et uniquement ces fichiers, exécute :
dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P
Pour info, les précisions de nany, pour la commande de nettoyage et une possibilité d'automatisation.
Dernière modification par xubu1957 (Le 24/11/2021, à 10:18)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#7 Le 24/11/2021, à 10:56
- Chareuleneuh
Re : [Résolu] Impossible d'imprimer sur HP 6200
Bonjour,
Non effectivement je ne l'avais pas fait !
Je viens de le faire, il n'y a plus inscrit "Récupération des données de l'imprimante" dans la barre "Etat de l'imprimante" mais l'impression ne se lance pas.
Merci du temps que vous prenez pour me répondre et m'aider:)
Hors ligne
#8 Le 24/11/2021, à 10:59
- xubu1957
Re : [Résolu] Impossible d'imprimer sur HP 6200
Il faudra attendre les conseils de grigouille ou d'ylag.
_ _ _
Montre :
sylvain3800 a écrit :
si tu as une EPSON :
dpkg -l | grep epson
Dernière modification par xubu1957 (Le 24/11/2021, à 11:03)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#9 Le 24/11/2021, à 11:39
- Chareuleneuh
Re : [Résolu] Impossible d'imprimer sur HP 6200
Bonjour,
Ok, merci pour ton message.
Maintenant dans la barre "État de l'imprimante" il est inscrit : "No suitable destination host found by cups-browsed"
Hors ligne
#10 Le 24/11/2021, à 11:54
- xubu1957
Re : [Résolu] Impossible d'imprimer sur HP 6200
Tente :
sudo service cups restartConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#11 Le 24/11/2021, à 12:11
- Chareuleneuh
Re : [Résolu] Impossible d'imprimer sur HP 6200
Pas de changement..:/
Hors ligne
#12 Le 24/11/2021, à 12:55
- michel_04
Re : [Résolu] Impossible d'imprimer sur HP 6200
Bonjour.
HPLIP, fourni par HP, ne peut fonctionner avec ton Epson.
C'est une EPL-6200 ?
How to install EPL-6200L in 16.04
Epson EPL-6200
A+
Dernière modification par michel_04 (Le 24/11/2021, à 14:08)
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#13 Le 24/11/2021, à 13:22
- ylag
Re : [Résolu] Impossible d'imprimer sur HP 6200
@michel_04 :
Bonjour,
Je crois que le titre de la discussion est trompeur, ce serait bien une imprimante HP ?
Vu au #5 :
Bus 003 Device 006: ID 03f0:1254 HP, Inc ENVY Photo 6200 seriesCe modèle serait listé comme HP Envy Photo 6200 All-in-one sur le site :
HPLIP All Supported Printer Models
A+
Dernière modification par ylag (Le 24/11/2021, à 16:26)
Hors ligne
#14 Le 24/11/2021, à 14:08
- Chareuleneuh
Re : [Résolu] Impossible d'imprimer sur HP 6200
Oulalalala bien vu !!! Je rectifie merci
Hors ligne
#15 Le 24/11/2021, à 14:14
- michel_04
Re : [Résolu] Impossible d'imprimer sur HP 6200
ylag a écrit :
Je crois que le titre de la discussion est trompeur, ce serait bien une imprimante HP
Oups...
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#16 Le 26/11/2021, à 15:23
- iznobe
Re : [Résolu] Impossible d'imprimer sur HP 6200
Bonjour , alors je ne sais pas exactement ou ca en est de l' avancement du probleme , mais dans le retour de hp-check , tout a la fin on peut voir :
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------donc logiquement il faudrait installer CUPS version 1.1 , j ' ai cru voir qu ' il l ' etait , donc moi pas comprendre ... pas la bonne version d ' ou le INCOMPAT ?
dbus , pareil , required ... faudrait peut etre verifier la piste des proprietaires des fichiers du /home dans un 1er temps pour celui là donc retour de :
ls -la ~-------------------------------------------------------------------------------------
HS : je viens de recevoir mon imprimante hp , la commande hp-check me renvoie 11 paquet manquants 
j ' ai tout de meme l ' impression qu il y a un cheveux dans la soupe . comme si il manquait une partie de l' installation des dependances lors de l' install de hplip .
d ' apres la doc HP : https://developers.hp.com/hp-linux-imag … /downloads
doc HP a écrit :
The HPLIP Automatic Installer
The Automatic Installer is known to work on the following Linux Distributions:
SUSE Linux (13.2, 42.1, 42.2, 42.3,15.0,15.1,15.2,15.3)
Fedora (22, 23, 24, 25, 26,27,28,29,30,31,32,33,34)
Linux Mint (117, 17.1, 17.2, 17.3, 18, 18.1, 18.2, 18.3, 19, 19.1,19.2,19.3,20,20.2)
Red Hat Enterprise Linux (6.0, 7.0, 7.2, 7.6,7.7,7.8,7.9,8.0,8.2,8.3,8.4)
Boss (5.0)
Ubuntu (12.04, 14.04, 15.10, 16.04, 16.10, 17.04,17.10,18.04,18.10,19.04,19.10,20.04,20.10,21.04.21.10)
Pourtant dans mon retour hpcheck :
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 21.10 versionje suis sous budgie 21.10 pour mon 1er test de configuration .
d' ailleurs le meme warning apparait pour Ubuntu 20.04 dans son HP-check :
warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install...ce qui explique probablement le tas d' erreur reporté par HP-check
Une install manuelle serait peut etre plus indiquée .
fin HS
-------------------------------
d ' apres le HP check de Monsieur , il manque les outils de compilation donc faut deja les ajouter :
sudo apt install build-essentialApres ca refaire un hp-check pour qu on voit ce qu ' il manque encore et installer les paquets manquants .
-----------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
error: libpthread libpthread - POSIX threads library REQUIRED - b'2.28' MISSING 'libpthread needs to be installed'
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.8 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.8 OK -
python3-xml Python XML libraries REQUIRED - 2.2.6 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.6.8 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.6 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed'
error: make make - GNU make utility to maintain groups of programs REQUIRED 3.0 - MISSING 'make needs to be installed'quand meme le resultat est peu convaincant .. autant de paquets manquants .
Dernière modification par iznobe (Le 26/11/2021, à 16:29)
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
En ligne
#17 Le 26/11/2021, à 16:20
- michel_04
Re : [Résolu] Impossible d'imprimer sur HP 6200
Bonjour.
Pour tester, je viens d'installer une HP_LaserJet_Pro_M148-M149 réseau sous Xubuntu 22.04 (VM connexion réseau par pont).
Install imprimante réseau :
xub@Xub-VirtualBox:~$ hp-setup 192.168.0.10
HP Linux Imaging and Printing System (ver. 3.21.8)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Searching for device...
Found device: hp:/net/HP_LaserJet_Pro_M148-M149?ip=192.168.0.10
HP Linux Imaging and Printing System (ver. 3.21.8)
System Tray Status Service ver. 2.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Done.
xub@Xub-VirtualBox:~$Install scanner (plugin) :
xub@Xub-VirtualBox:~$ xsane
(xsane:2466): Gdk-CRITICAL **: 15:07:01.930: IA__gdk_drawable_unref: assertion 'GDK_IS_DRAWABLE (drawable)' failed
(xsane:2466): Gdk-CRITICAL **: 15:07:01.932: IA__gdk_drawable_unref: assertion 'GDK_IS_DRAWABLE (drawable)' failed
HP Linux Imaging and Printing System (ver. 3.21.8)
Diagnose Plugin Utility ver. 1.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.21.8)
Plugin Download and Install Utility ver. 2.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.21.8)
Plugin Download and Install Utility ver. 2.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Checking for network connection...
Downloading plug-in from:
Importing digital key
Creating directory plugin_tmp
Verifying archive integrity... All good.
Uncompressing HPLIP 3.21.8 Plugin Self Extracting Archive..............................................................
HP Linux Imaging and Printing System (ver. 3.21.8)
Plugin Installer ver. 3.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Plug-in version: 3.21.8
Installed HPLIP version: 3.21.8
Number of files to install: 64
note: Using PyQt5
xub@Xub-VirtualBox:~$Edit :
Lors du lancement de l'utilitaire Xsane, affichage de deux choix : Webcam et Scanner.
Modification de la commande du lanceur de Xsane :
Avant :
xsaneAprès :
xsane hpaio:/net/HP_LaserJet_Pro_M148-M149?ip=192.168.0.10A+
Dernière modification par michel_04 (Le 26/11/2021, à 16:35)
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#18 Le 27/11/2021, à 10:32
- iznobe
Re : [Résolu] Impossible d'imprimer sur HP 6200
Bonjour @michel_04 , que dis le " hp-check " ?
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
En ligne
#19 Le 27/11/2021, à 12:52
- michel_04
Re : [Résolu] Impossible d'imprimer sur HP 6200
Bonjour.
iznobe a écrit :
Bonjour @michel_04 , que dis le " hp-check " ?
Edit :
Entre balises Code, le texte disparait lors du défilement ou du clic de souris... (retour de ce vieux bug...?)
Je mets les retours entre balises Quote.
Edit 2 : Corrigé.
Sous Xubuntu 22.04 (VM), beaucoup d'erreurs :
xub@Xub-VirtualBox:~$ hp-check
Saving output in log file: /home/xub/hp-check.log
HP Linux Imaging and Printing System (ver. 3.21.8)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or
.run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or
an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases
(both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: ubuntu-22.04 version is not supported. Using ubuntu-21.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.13.0-19-generic #19-Ubuntu SMP Thu Oct 7 21:58:00 UTC 2021 GNU/Linux
Host: Xub-VirtualBox
Proc: 5.13.0-19-generic #19-Ubuntu SMP Thu Oct 7 21:58:00 UTC 2021 GNU/Linux
Distribution: ubuntu 22.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.21.8
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 22.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.21.8
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.21.8
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.21.8
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/net/HP_LaserJet_Pro_M148-M149?ip=192.168.0.10
[installation]
date_time = 11/27/21 11:30:45
version = 3.21.8
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.54.0 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.32 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.20 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.21 OK -
avahi-utils avahi-utils OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.34' OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libavahi-dev libavahi-dev REQUIRED - - MISSING 'libavahi-dev needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.9.9 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.4.1 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.9.9 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 8.1.2 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.6.2 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 11.2.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.3 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.21.8 OK -
hpmudext IO-Extension REQUIRED - 3.21.8 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.21.8 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.21.8 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `escl:https://192.168.0.10:443' is a HP LaserJet Pro M148dw (5D807D) platen,adf scanner
device `airscan:e0:HP LaserJet Pro M148dw (5D807D)' is a eSCL HP LaserJet Pro M148dw (5D807D) ip=192.168.0.10
device `hpaio:/net/HP_LaserJet_Pro_M148-M149?ip=192.168.0.10' is a Hewlett-Packard HP_LaserJet_Pro_M148-M149 all-in-one
device `escl:https://192.168.0.10:443' is a HP LaserJet Pro M148dw (5D807D) platen,adf scanner
device `airscan:e0:HP LaserJet Pro M148dw (5D807D)' is a eSCL HP LaserJet Pro M148dw (5D807D) ip=192.168.0.10
device `hpaio:/net/HP_LaserJet_Pro_M148-M149?ip=192.168.0.10' is a Hewlett-Packard HP_LaserJet_Pro_M148-M149 all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Type: Printer
Device URI: hp:/net/HP_LaserJet_Pro_M148-M149?ip=192.168.0.10
Communication status: Good
Type: Unknown
Device URI: implicitclass://HP_LaserJet_Pro_M148dw_5D807D_/
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libusb-0.1-4' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libavahi-client-dev' package is missing/incompatible
error: 'libavahi-core-dev' package is missing/incompatible
error: 'libavahi-common-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
None
Total Errors: 14
Total Warnings: 0
Done.
xub@Xub-VirtualBox:~$
Sous Debian 11 (install en dur), la même installation avec un peu moins d'erreurs :
michel@Michel-T450:~$ hp-check
Saving output in log file: /home/michel/hp-check.log
HP Linux Imaging and Printing System (ver. 3.21.2)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied
tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully
compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb,
.rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to
successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the
above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: debian-11 version is not supported. Using debian-10.7 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.10.0-9-amd64 #1 SMP Debian 5.10.70-1 (2021-09-30) GNU/Linux
Host: Michel-T450
Proc: 5.10.0-9-amd64 #1 SMP Debian 5.10.70-1 (2021-09-30) GNU/Linux
Distribution: debian 11
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.21.2
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian distro 11 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.21.2
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.21.2
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.21.2
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[fax]
email_address =
voice_phone =
[installation]
date_time = 11/27/21 11:45:09
version = 3.21.2
[last_used]
device_uri = hp:/net/HP_LaserJet_Pro_M148-M149?hostname=NPI5D807D.local
printer_name =
working_dir = /home/michel/T\xe9l\xe9\x63hargements/hplip-3.20.9-plugin.run
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1605021761
notify_upgrade = false
pending_upgrade_time = 0
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.53.3 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.31 OK -
dbus DBus - Message bus system REQUIRED - 1.12.20 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.21 OK -
avahi-utils avahi-utils OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - OK -
cups-image CUPS image - CUPS image development files REQUIRED - - OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.9 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.9.2 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.10 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.9.2 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 8.1.2 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.59 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 10.2.1 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.3 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.21.2 OK -
hpmudext IO-Extension REQUIRED - 3.21.2 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.21.2 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.21.2 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/net/HP_LaserJet_Pro_M148-M149?hostname=NPI5D807D.local' is a Hewlett-Packard HP_LaserJet_Pro_M148-M149 all-in-one
device `hpaio:/net/hp_laserjet_pro_m148-m149?ip=192.168.0.10&queue=false' is a Hewlett-Packard hp_laserjet_pro_m148-m149 all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Type: Printer
Device URI: hp:/net/HP_LaserJet_Pro_M148-M149?hostname=NPI5D807D.local
Communication status: Good
Type: Unknown
Device URI: implicitclass://HP_LaserJet_Pro_M148dw_5D807D_/
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 4
Total Warnings: 0
Done.
michel@Michel-T450:~$ A+
Dernière modification par michel_04 (Le 27/11/2021, à 14:49)
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#20 Le 27/11/2021, à 13:05
- iznobe
Re : [Résolu] Impossible d'imprimer sur HP 6200
@michel_04 , ok , donc on peut en deduire que hp-check n' est pas vraiment fiable ( ou pas adapté a toutes les versions ) .
pour info , meme avec les erreurs du hpcheck sur mon install , j ' ai tout de meme pu installer l ' imprimante et le scanner .
et les 2 fonctionnent .
j ' ai quand meme installé les 11 paquets que mentionnait le hp check en REQUIRED . mais je ne suis pas sur que ca ait changé gand chose , en tout cas ca ne peut pas faire de mal .
@Chareuleneuh , ou en es tu ?
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
En ligne
#21 Le 27/11/2021, à 13:07
- michel_04
Re : [Résolu] Impossible d'imprimer sur HP 6200
iznobe a écrit :
pour info , meme avec les erreurs du hpcheck sur mon install , j ' ai tout de meme pu installer l ' imprimante et le scanner .
et les 2 fonctionnent .
Idem.
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#22 Le 27/11/2021, à 13:44
- cqfd93
Re : [Résolu] Impossible d'imprimer sur HP 6200
Bonjour,
michel_04 a écrit :
Edit :
Entre balises Code, le texte disparait lors du défilement ou du clic de souris... (retour de ce vieux bug...?)
Je mets les retours entre balises Quote.
Regarde cette discussion [Résolu] Bloc Code se vide. (que je viens d'épingler pour qu'elle reste bien visible). Moi ça fait un bout de temps que je ne vois plus ce vilain bug.
− cqfd93 −
En ligne
#23 Le 27/11/2021, à 13:57
- iznobe
Re : [Résolu] Impossible d'imprimer sur HP 6200
pareil avec FF 94.0 plus ce bug , cependant je l' ai eu aussi pendant un bon moment , plutot penible d ' ailleurs quand on suit une dicussion .
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
En ligne
#24 Le 27/11/2021, à 14:48
- michel_04
Re : [Résolu] Impossible d'imprimer sur HP 6200
cqfd93 a écrit :
michel_04 a écrit :Edit :
Entre balises Code, le texte disparait lors du défilement ou du clic de souris... (retour de ce vieux bug...?)
Je mets les retours entre balises Quote.Regarde cette discussion [Résolu] Bloc Code se vide. (que je viens d'épingler pour qu'elle reste bien visible). Moi ça fait un bout de temps que je ne vois plus ce vilain bug.
Merci cqfd93.
C'est vrai qu'il y a longtemps que je n'avais plus vu ce bug.
J'ai appliqué la manip que tu proposais dans le message #9 du 09/04/2020.
C'est ok. (Firefox 78.15.0esr)
Dernière modification par michel_04 (Le 27/11/2021, à 14:54)
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#25 Le 30/11/2021, à 10:50
- Chareuleneuh
Re : [Résolu] Impossible d'imprimer sur HP 6200
Salut !!
C'est toujours pareil...!!:/
cha@george:~$ ls -la ~
total 756
drwxr-xr-x 27 cha cha 4096 nov. 24 09:06 .
drwxr-xr-x 3 root root 4096 déc. 22 2018 ..
drwx------ 3 cha cha 4096 mai 3 2019 .adobe
-rw------- 1 cha cha 4880 nov. 24 11:07 .bash_history
-rw-r--r-- 1 cha cha 220 déc. 22 2018 .bash_logout
-rw-r--r-- 1 cha cha 3771 déc. 22 2018 .bashrc
drwxr-xr-x 2 cha cha 4096 oct. 12 09:12 Bureau
drwx------ 36 cha cha 4096 nov. 17 13:53 .cache
drwx------ 30 cha cha 4096 nov. 29 2020 .config
drwx------ 3 root root 4096 nov. 17 11:16 .dbus
drwxr-xr-x 20 cha cha 4096 nov. 27 16:18 Documents
drwx------ 2 cha cha 4096 janv. 21 2019 .dosbox
-rw-r--r-- 1 cha cha 8980 déc. 22 2018 examples.desktop
drwx------ 3 cha cha 4096 nov. 30 09:42 .gnupg
drwxr-xr-x 2 cha cha 4096 janv. 21 2019 .gphoto
drwx------ 2 root root 4096 nov. 17 11:29 .gvfs
-rw-r----- 1 cha cha 15970 nov. 24 09:07 hp-check.log
drwxr-xr-x 2 cha cha 4096 nov. 6 14:28 .hplip
-rw------- 1 cha cha 190554 nov. 16 15:29 .ICEauthority
drwxr-xr-x 11 cha cha 389120 nov. 25 10:14 Images
drwx------ 3 cha cha 4096 déc. 22 2018 .local
drwx------ 3 cha cha 4096 mai 3 2019 .macromedia
drwxr-xr-x 2 cha cha 4096 déc. 22 2018 Modèles
drwx------ 5 cha cha 4096 déc. 22 2018 .mozilla
drwxr-xr-x 97 cha cha 4096 oct. 12 10:15 Musique
drwxr-x--- 10 cha cha 4096 janv. 9 2019 .pingus
-rw-r--r-- 1 cha cha 807 déc. 22 2018 .profile
drwxr-xr-x 2 cha cha 4096 déc. 22 2018 Public
drwx------ 8 cha cha 4096 nov. 6 2019 snap
drwx------ 2 cha cha 4096 déc. 31 2018 .ssh
-rw-r--r-- 1 cha cha 0 janv. 3 2019 .sudo_as_admin_successful
drwxr-xr-x 7 cha cha 4096 janv. 22 2019 .teeworlds
drwxr-xr-x 4 cha cha 16384 nov. 29 08:11 Téléchargements
drwx------ 5 cha cha 4096 déc. 22 2018 .thunderbird
drwxr-xr-x 10 cha cha 4096 nov. 28 15:36 Vidéos
-rw-r--r-- 1 cha cha 180 nov. 17 11:33 .wget-hsts
-rw-rw-r-- 1 cha cha 7092 nov. 16 2019 .xboardrc
-rw-rw-r-- 1 cha cha 131 déc. 25 2018 .xinputrcet après les ajouts d'outils de compilation :
cha@george:~$ hp-check
Saving output in log file: /home/cha/hp-check.log
HP Linux Imaging and Printing System (ver. 3.20.3)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.4.0-90-generic #101-Ubuntu SMP Fri Oct 15 20:00:55 UTC 2021 GNU/Linux
Host: george
Proc: 5.4.0-90-generic #101-Ubuntu SMP Fri Oct 15 20:00:55 UTC 2021 GNU/Linux
Distribution: ubuntu 20.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.3
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.3
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 11/30/21 09:49:22
version = 3.20.3
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.10 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.10 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.3 OK -
hpmudext IO-Extension REQUIRED - 3.20.3 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/usb/ENVY_Photo_6200_series?serial=TH177DV0JD' is a Hewlett-Packard ENVY_Photo_6200_series all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- -------------------------
hp:/usb/ENVY_Photo_6200_series?s HP ENVY Photo 6200 series
erial=TH177DV0JD
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Type: Unknown
Device URI: implicitclass://HP_ENVY_Photo_6200_series_BC77CC_/
--------------
| PERMISSION |
--------------
USB None Required - - OK Node:'/dev/bus/usb/003/005' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libusb-0.1-4' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'xsane' package is missing/incompatible
error: 'python3-notify2' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 15
Total Warnings: 0
Done.Hors ligne