#1 Le 10/01/2022, à 19:44
- Rando88
[Résolu]RTX 3060 double ecran impossible
Bonjour,
J'ai un laptop avec un écran additionnel et il m'est impossible d'avoir les 2 écrans simultanément. Lorsque le pilote Xorg est actif j'ai l'écran du laptop et lorsque le pilote Nvidia est actif j'ai l'écran additionnel en HDMI.
Je souhaiterais avoir mes 2 écrans simultanément.
J'ajoute quelques fichiers et résultats de commande en espérant une solution.
Mon fichier /etc/X11/xorg.conf :
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 470.86
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 470.57.01
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 1920 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Ancor Communications Inc ASUS VW220"
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "NVIDIA GeForce RTX 3060 Laptop GPU"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-0"
Option "metamodes" "nvidia-auto-select +1920+0 {AllowGSYNC=Off}"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSectionMon fichier /var/log/Xorg.0.log :
[ 6.796] (--) Log file renamed from "/var/log/Xorg.pid-1218.log" to "/var/log/Xorg.0.log"
[ 6.797]
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[ 6.797] Build Operating System: linux Ubuntu
[ 6.797] Current Operating System: Linux cervin 5.11.0-44-generic #48~20.04.2-Ubuntu SMP Tue Dec 14 15:36:44 UTC 2021 x86_64
[ 6.797] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-44-generic root=UUID=9caa224a-f294-4a56-aef5-9c8d4e03c6c1 ro quiet amdgpu.dc=0 splash vt.handoff=7
[ 6.797] Build Date: 14 December 2021 02:14:13PM
[ 6.797] xorg-server 2:1.20.13-1ubuntu1~20.04.2 (For technical support please see http://www.ubuntu.com/support)
[ 6.797] Current version of pixman: 0.38.4
[ 6.797] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.797] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.797] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 10 18:11:33 2022
[ 6.797] (==) Using config file: "/etc/X11/xorg.conf"
[ 6.797] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.798] (==) ServerLayout "Layout0"
[ 6.798] (**) |-->Screen "Screen0" (0)
[ 6.798] (**) | |-->Monitor "Monitor0"
[ 6.798] (**) | |-->Device "Device0"
[ 6.798] (**) |-->Input Device "Keyboard0"
[ 6.798] (**) |-->Input Device "Mouse0"
[ 6.798] (**) Option "Xinerama" "0"
[ 6.798] (==) Automatically adding devices
[ 6.798] (==) Automatically enabling devices
[ 6.798] (==) Automatically adding GPU devices
[ 6.798] (==) Automatically binding GPU devices
[ 6.798] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 6.800] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 6.800] Entry deleted from font path.
[ 6.800] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 6.800] Entry deleted from font path.
[ 6.800] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 6.800] Entry deleted from font path.
[ 6.800] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 6.800] Entry deleted from font path.
[ 6.800] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 6.800] Entry deleted from font path.
[ 6.800] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 6.800] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.800] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 6.800] (WW) Disabling Keyboard0
[ 6.800] (WW) Disabling Mouse0
[ 6.800] (II) Loader magic: 0x555bf6ccf020
[ 6.800] (II) Module ABI versions:
[ 6.800] X.Org ANSI C Emulation: 0.4
[ 6.800] X.Org Video Driver: 24.1
[ 6.800] X.Org XInput driver : 24.1
[ 6.800] X.Org Server Extension : 10.0
[ 6.800] (++) using VT number 1
[ 6.800] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 6.800] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 6.822] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.826] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/xorg/modules"
[ 6.826] (**) OutputClass "Nvidia Prime" ModulePath extended to "/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/xorg/modules"
[ 6.826] (**) OutputClass "Nvidia Prime" setting /dev/dri/card1 as PrimaryGPU
[ 6.827] (--) PCI: (0@0:2:0) 8086:9bc4:1462:12a7 rev 5, Mem @ 0x6202000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 6.827] (--) PCI:*(1@0:0:0) 10de:2520:1462:12f1 rev 161, Mem @ 0xa0000000/16777216, 0x6000000000/8589934592, 0x6200000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 6.827] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 6.827] (II) LoadModule: "dbe"
[ 6.827] (II) Module "dbe" already built-in
[ 6.827] (II) LoadModule: "extmod"
[ 6.827] (II) Module "extmod" already built-in
[ 6.827] (II) LoadModule: "glx"
[ 6.828] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.831] (II) Module glx: vendor="X.Org Foundation"
[ 6.831] compiled for 1.20.13, module version = 1.0.0
[ 6.831] ABI class: X.Org Server Extension, version 10.0
[ 6.831] (II) LoadModule: "nvidia"
[ 6.831] (II) Loading /lib/x86_64-linux-gnu/nvidia/xorg/nvidia_drv.so
[ 6.834] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 6.834] compiled for 1.6.99.901, module version = 1.0.0
[ 6.834] Module class: X.Org Video Driver
[ 6.834] (II) NVIDIA dlloader X Driver 470.86 Tue Oct 26 21:53:29 UTC 2021
[ 6.834] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 6.834] (II) Loading sub module "fb"
[ 6.834] (II) LoadModule: "fb"
[ 6.835] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.835] (II) Module fb: vendor="X.Org Foundation"
[ 6.835] compiled for 1.20.13, module version = 1.0.0
[ 6.835] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.835] (II) Loading sub module "wfb"
[ 6.835] (II) LoadModule: "wfb"
[ 6.835] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6.836] (II) Module wfb: vendor="X.Org Foundation"
[ 6.836] compiled for 1.20.13, module version = 1.0.0
[ 6.836] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.836] (II) Loading sub module "ramdac"
[ 6.836] (II) LoadModule: "ramdac"
[ 6.836] (II) Module "ramdac" already built-in
[ 6.836] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 6.836] (==) NVIDIA(0): RGB weight 888
[ 6.836] (==) NVIDIA(0): Default visual is TrueColor
[ 6.836] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 6.837] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 6.837] (II) Applying OutputClass "Nvidia Prime" options to /dev/dri/card1
[ 6.837] (**) NVIDIA(0): Option "Stereo" "0"
[ 6.837] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[ 6.837] (**) NVIDIA(0): Option "SLI" "Off"
[ 6.837] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 6.837] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 6.837] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 6.837] (**) NVIDIA(0): Stereo disabled by request
[ 6.837] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 6.837] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 6.837] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +1920+0 {AllowGSYNC=Off}"
[ 6.837] (**) NVIDIA(0): Enabling 2D acceleration
[ 6.837] (II) Loading sub module "glxserver_nvidia"
[ 6.837] (II) LoadModule: "glxserver_nvidia"
[ 6.837] (II) Loading /lib/x86_64-linux-gnu/nvidia/xorg/libglxserver_nvidia.so
[ 6.855] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 6.855] compiled for 1.6.99.901, module version = 1.0.0
[ 6.855] Module class: X.Org Server Extension
[ 6.855] (II) NVIDIA GLX Module 470.86 Tue Oct 26 21:51:04 UTC 2021
[ 6.856] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 6.857] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 6.857] (--) NVIDIA(0): DFP-0 (boot)
[ 6.858] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3060 Laptop GPU (GA106-A) at
[ 6.858] (II) NVIDIA(0): PCI:1:0:0 (GPU-0)
[ 6.858] (--) NVIDIA(0): Memory: 6291456 kBytes
[ 6.858] (--) NVIDIA(0): VideoBIOS: 94.06.13.00.93
[ 6.858] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 6.903] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): connected
[ 6.903] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): Internal TMDS
[ 6.903] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): 600.0 MHz maximum pixel clock
[ 6.903] (--) NVIDIA(GPU-0):
[ 6.931] (II) NVIDIA(0): Validated MetaModes:
[ 6.931] (II) NVIDIA(0): "nvidia-auto-select+1920+0{AllowGSYNC=Off}"
[ 6.931] (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1050
[ 6.982] (--) NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
[ 6.982] (--) NVIDIA(0): option
[ 6.982] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 6.982] (II) NVIDIA: access.
[ 7.004] (II) NVIDIA(0): Setting mode "nvidia-auto-select+1920+0{AllowGSYNC=Off}"
[ 7.087] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 7.087] (==) NVIDIA(0): Backing store enabled
[ 7.087] (==) NVIDIA(0): Silken mouse enabled
[ 7.088] (**) NVIDIA(0): DPMS enabled
[ 7.088] (WW) NVIDIA(0): Option "IgnoreDisplayDevices" is not used
[ 7.088] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 7.088] (II) Loading sub module "dri2"
[ 7.088] (II) LoadModule: "dri2"
[ 7.088] (II) Module "dri2" already built-in
[ 7.088] (II) NVIDIA(0): [DRI2] Setup complete
[ 7.088] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 7.088] (II) Initializing extension Generic Event Extension
[ 7.088] (II) Initializing extension SHAPE
[ 7.088] (II) Initializing extension MIT-SHM
[ 7.088] (II) Initializing extension XInputExtension
[ 7.089] (II) Initializing extension XTEST
[ 7.089] (II) Initializing extension BIG-REQUESTS
[ 7.089] (II) Initializing extension SYNC
[ 7.089] (II) Initializing extension XKEYBOARD
[ 7.089] (II) Initializing extension XC-MISC
[ 7.089] (II) Initializing extension SECURITY
[ 7.089] (II) Initializing extension XFIXES
[ 7.089] (II) Initializing extension RENDER
[ 7.089] (II) Initializing extension RANDR
[ 7.089] (II) Initializing extension COMPOSITE
[ 7.089] (II) Initializing extension DAMAGE
[ 7.089] (II) Initializing extension MIT-SCREEN-SAVER
[ 7.089] (II) Initializing extension DOUBLE-BUFFER
[ 7.090] (II) Initializing extension RECORD
[ 7.090] (II) Initializing extension DPMS
[ 7.090] (II) Initializing extension Present
[ 7.090] (II) Initializing extension DRI3
[ 7.090] (II) Initializing extension X-Resource
[ 7.090] (II) Initializing extension XVideo
[ 7.090] (II) Initializing extension XVideo-MotionCompensation
[ 7.090] (II) Initializing extension SELinux
[ 7.090] (II) SELinux: Disabled on system
[ 7.090] (II) Initializing extension GLX
[ 7.090] (II) Initializing extension GLX
[ 7.090] (II) Indirect GLX disabled.
[ 7.090] (II) GLX: Another vendor is already registered for screen 0
[ 7.090] (II) Initializing extension XFree86-VidModeExtension
[ 7.090] (II) Initializing extension XFree86-DGA
[ 7.090] (II) Initializing extension XFree86-DRI
[ 7.090] (II) Initializing extension DRI2
[ 7.090] (II) Initializing extension NV-GLX
[ 7.090] (II) Initializing extension NV-CONTROL
[ 7.090] (II) Initializing extension XINERAMA
[ 7.123] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 7.124] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 7.124] (II) LoadModule: "libinput"
[ 7.124] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 7.125] (II) Module libinput: vendor="X.Org Foundation"
[ 7.125] compiled for 1.20.4, module version = 0.29.0
[ 7.125] Module class: X.Org XInput Driver
[ 7.125] ABI class: X.Org XInput driver, version 24.1
[ 7.125] (II) Using input driver 'libinput' for 'Power Button'
[ 7.125] (**) Power Button: always reports core events
[ 7.125] (**) Option "Device" "/dev/input/event3"
[ 7.125] (**) Option "_source" "server/udev"
[ 7.128] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 7.128] (II) event3 - Power Button: device is a keyboard
[ 7.128] (II) event3 - Power Button: device removed
[ 7.171] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 7.171] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 7.171] (**) Option "xkb_model" "pc105"
[ 7.171] (**) Option "xkb_layout" "fr"
[ 7.181] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 7.181] (II) event3 - Power Button: device is a keyboard
[ 7.182] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 7.182] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 7.182] (II) Using input driver 'libinput' for 'Video Bus'
[ 7.182] (**) Video Bus: always reports core events
[ 7.182] (**) Option "Device" "/dev/input/event5"
[ 7.182] (**) Option "_source" "server/udev"
[ 7.182] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 7.182] (II) event5 - Video Bus: device is a keyboard
[ 7.182] (II) event5 - Video Bus: device removed
[ 7.231] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event5"
[ 7.232] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 7.232] (**) Option "xkb_model" "pc105"
[ 7.232] (**) Option "xkb_layout" "fr"
[ 7.232] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 7.232] (II) event5 - Video Bus: device is a keyboard
[ 7.232] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 7.232] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 7.232] (II) Using input driver 'libinput' for 'Video Bus'
[ 7.232] (**) Video Bus: always reports core events
[ 7.232] (**) Option "Device" "/dev/input/event6"
[ 7.232] (**) Option "_source" "server/udev"
[ 7.233] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 7.233] (II) event6 - Video Bus: device is a keyboard
[ 7.233] (II) event6 - Video Bus: device removed
[ 7.259] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input8/event6"
[ 7.259] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 7.259] (**) Option "xkb_model" "pc105"
[ 7.259] (**) Option "xkb_layout" "fr"
[ 7.260] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 7.260] (II) event6 - Video Bus: device is a keyboard
[ 7.260] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 7.260] (II) No input driver specified, ignoring this device.
[ 7.260] (II) This device may have been added with another device file.
[ 7.261] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 7.261] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 7.261] (II) Using input driver 'libinput' for 'Power Button'
[ 7.261] (**) Power Button: always reports core events
[ 7.261] (**) Option "Device" "/dev/input/event2"
[ 7.261] (**) Option "_source" "server/udev"
[ 7.261] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 7.261] (II) event2 - Power Button: device is a keyboard
[ 7.261] (II) event2 - Power Button: device removed
[ 7.291] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 7.291] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 7.291] (**) Option "xkb_model" "pc105"
[ 7.291] (**) Option "xkb_layout" "fr"
[ 7.292] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 7.292] (II) event2 - Power Button: device is a keyboard
[ 7.292] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 7.292] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 7.292] (II) Using input driver 'libinput' for 'Sleep Button'
[ 7.292] (**) Sleep Button: always reports core events
[ 7.292] (**) Option "Device" "/dev/input/event1"
[ 7.292] (**) Option "_source" "server/udev"
[ 7.293] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 7.293] (II) event1 - Sleep Button: device is a keyboard
[ 7.293] (II) event1 - Sleep Button: device removed
[ 7.315] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 7.315] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 7.315] (**) Option "xkb_model" "pc105"
[ 7.315] (**) Option "xkb_layout" "fr"
[ 7.316] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 7.316] (II) event1 - Sleep Button: device is a keyboard
[ 7.317] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 7.317] (II) No input driver specified, ignoring this device.
[ 7.317] (II) This device may have been added with another device file.
[ 7.317] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 7.317] (II) No input driver specified, ignoring this device.
[ 7.317] (II) This device may have been added with another device file.
[ 7.317] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[ 7.317] (II) No input driver specified, ignoring this device.
[ 7.317] (II) This device may have been added with another device file.
[ 7.318] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event17)
[ 7.318] (II) No input driver specified, ignoring this device.
[ 7.318] (II) This device may have been added with another device file.
[ 7.318] (II) config/udev: Adding input device Cherry GmbH wired keyboard (/dev/input/event10)
[ 7.318] (**) Cherry GmbH wired keyboard: Applying InputClass "libinput keyboard catchall"
[ 7.318] (II) Using input driver 'libinput' for 'Cherry GmbH wired keyboard'
[ 7.318] (**) Cherry GmbH wired keyboard: always reports core events
[ 7.318] (**) Option "Device" "/dev/input/event10"
[ 7.318] (**) Option "_source" "server/udev"
[ 7.320] (II) event10 - Cherry GmbH wired keyboard: is tagged by udev as: Keyboard
[ 7.320] (II) event10 - Cherry GmbH wired keyboard: device is a keyboard
[ 7.320] (II) event10 - Cherry GmbH wired keyboard: device removed
[ 7.368] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.0/0003:046A:0107.0004/input/input13/event10"
[ 7.368] (II) XINPUT: Adding extended input device "Cherry GmbH wired keyboard" (type: KEYBOARD, id 11)
[ 7.368] (**) Option "xkb_model" "pc105"
[ 7.368] (**) Option "xkb_layout" "fr"
[ 7.370] (II) event10 - Cherry GmbH wired keyboard: is tagged by udev as: Keyboard
[ 7.370] (II) event10 - Cherry GmbH wired keyboard: device is a keyboard
[ 7.371] (II) config/udev: Adding input device Cherry GmbH wired keyboard System Control (/dev/input/event11)
[ 7.371] (**) Cherry GmbH wired keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 7.371] (II) Using input driver 'libinput' for 'Cherry GmbH wired keyboard System Control'
[ 7.371] (**) Cherry GmbH wired keyboard System Control: always reports core events
[ 7.371] (**) Option "Device" "/dev/input/event11"
[ 7.371] (**) Option "_source" "server/udev"
[ 7.373] (II) event11 - Cherry GmbH wired keyboard System Control: is tagged by udev as: Keyboard
[ 7.373] (II) event11 - Cherry GmbH wired keyboard System Control: device is a keyboard
[ 7.373] (II) event11 - Cherry GmbH wired keyboard System Control: device removed
[ 7.396] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.1/0003:046A:0107.0005/input/input14/event11"
[ 7.396] (II) XINPUT: Adding extended input device "Cherry GmbH wired keyboard System Control" (type: KEYBOARD, id 12)
[ 7.396] (**) Option "xkb_model" "pc105"
[ 7.396] (**) Option "xkb_layout" "fr"
[ 7.400] (II) event11 - Cherry GmbH wired keyboard System Control: is tagged by udev as: Keyboard
[ 7.400] (II) event11 - Cherry GmbH wired keyboard System Control: device is a keyboard
[ 7.402] (II) config/udev: Adding input device Cherry GmbH wired keyboard Consumer Control (/dev/input/event13)
[ 7.402] (**) Cherry GmbH wired keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 7.402] (II) Using input driver 'libinput' for 'Cherry GmbH wired keyboard Consumer Control'
[ 7.402] (**) Cherry GmbH wired keyboard Consumer Control: always reports core events
[ 7.402] (**) Option "Device" "/dev/input/event13"
[ 7.402] (**) Option "_source" "server/udev"
[ 7.406] (II) event13 - Cherry GmbH wired keyboard Consumer Control: is tagged by udev as: Keyboard
[ 7.406] (II) event13 - Cherry GmbH wired keyboard Consumer Control: device is a keyboard
[ 7.407] (II) event13 - Cherry GmbH wired keyboard Consumer Control: device removed
[ 7.424] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.1/0003:046A:0107.0005/input/input15/event13"
[ 7.424] (II) XINPUT: Adding extended input device "Cherry GmbH wired keyboard Consumer Control" (type: KEYBOARD, id 13)
[ 7.424] (**) Option "xkb_model" "pc105"
[ 7.424] (**) Option "xkb_layout" "fr"
[ 7.428] (II) event13 - Cherry GmbH wired keyboard Consumer Control: is tagged by udev as: Keyboard
[ 7.428] (II) event13 - Cherry GmbH wired keyboard Consumer Control: device is a keyboard
[ 7.430] (II) config/udev: Adding input device Logitech M705 (/dev/input/event12)
[ 7.430] (**) Logitech M705: Applying InputClass "libinput pointer catchall"
[ 7.430] (II) Using input driver 'libinput' for 'Logitech M705'
[ 7.430] (**) Logitech M705: always reports core events
[ 7.431] (**) Option "Device" "/dev/input/event12"
[ 7.431] (**) Option "_source" "server/udev"
[ 7.434] (II) event12 - Logitech M705: is tagged by udev as: Mouse
[ 7.435] (II) event12 - Logitech M705: device is a pointer
[ 7.435] (II) event12 - Logitech M705: device removed
[ 7.464] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.2/0003:046D:C52B.0008/0003:046D:406D.0009/input/input26/event12"
[ 7.464] (II) XINPUT: Adding extended input device "Logitech M705" (type: MOUSE, id 14)
[ 7.464] (**) Option "AccelerationScheme" "none"
[ 7.464] (**) Logitech M705: (accel) selected scheme none/0
[ 7.464] (**) Logitech M705: (accel) acceleration factor: 2.000
[ 7.464] (**) Logitech M705: (accel) acceleration threshold: 4
[ 7.468] (II) event12 - Logitech M705: is tagged by udev as: Mouse
[ 7.469] (II) event12 - Logitech M705: device is a pointer
[ 7.470] (II) config/udev: Adding input device Logitech M705 (/dev/input/mouse2)
[ 7.471] (II) No input driver specified, ignoring this device.
[ 7.471] (II) This device may have been added with another device file.
[ 7.472] (II) config/udev: Adding input device SteelSeries SteelSeries KLC (/dev/input/event9)
[ 7.472] (**) SteelSeries SteelSeries KLC: Applying InputClass "libinput keyboard catchall"
[ 7.472] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries KLC'
[ 7.472] (**) SteelSeries SteelSeries KLC: always reports core events
[ 7.472] (**) Option "Device" "/dev/input/event9"
[ 7.472] (**) Option "_source" "server/udev"
[ 7.476] (II) event9 - SteelSeries SteelSeries KLC: is tagged by udev as: Keyboard
[ 7.476] (II) event9 - SteelSeries SteelSeries KLC: device is a keyboard
[ 7.476] (II) event9 - SteelSeries SteelSeries KLC: device removed
[ 7.492] (II) libinput: SteelSeries SteelSeries KLC: needs a virtual subdevice
[ 7.492] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:1038:1122.0003/input/input12/event9"
[ 7.492] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries KLC" (type: MOUSE, id 15)
[ 7.492] (**) Option "AccelerationScheme" "none"
[ 7.492] (**) SteelSeries SteelSeries KLC: (accel) selected scheme none/0
[ 7.492] (**) SteelSeries SteelSeries KLC: (accel) acceleration factor: 2.000
[ 7.492] (**) SteelSeries SteelSeries KLC: (accel) acceleration threshold: 4
[ 7.496] (II) event9 - SteelSeries SteelSeries KLC: is tagged by udev as: Keyboard
[ 7.496] (II) event9 - SteelSeries SteelSeries KLC: device is a keyboard
[ 7.498] (II) config/udev: Adding input device CUST0001:00 06CB:7E7E Mouse (/dev/input/event18)
[ 7.498] (**) CUST0001:00 06CB:7E7E Mouse: Applying InputClass "libinput pointer catchall"
[ 7.498] (II) Using input driver 'libinput' for 'CUST0001:00 06CB:7E7E Mouse'
[ 7.498] (**) CUST0001:00 06CB:7E7E Mouse: always reports core events
[ 7.498] (**) Option "Device" "/dev/input/event18"
[ 7.498] (**) Option "_source" "server/udev"
[ 7.501] (II) event18 - CUST0001:00 06CB:7E7E Mouse: is tagged by udev as: Mouse Pointingstick
[ 7.502] (II) event18 - CUST0001:00 06CB:7E7E Mouse: device is a pointer
[ 7.504] (II) event18 - CUST0001:00 06CB:7E7E Mouse: device removed
[ 7.548] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-2/i2c-CUST0001:00/0018:06CB:7E7E.0001/input/input33/event18"
[ 7.548] (II) XINPUT: Adding extended input device "CUST0001:00 06CB:7E7E Mouse" (type: MOUSE, id 16)
[ 7.548] (**) Option "AccelerationScheme" "none"
[ 7.548] (**) CUST0001:00 06CB:7E7E Mouse: (accel) selected scheme none/0
[ 7.548] (**) CUST0001:00 06CB:7E7E Mouse: (accel) acceleration factor: 2.000
[ 7.548] (**) CUST0001:00 06CB:7E7E Mouse: (accel) acceleration threshold: 4
[ 7.551] (II) event18 - CUST0001:00 06CB:7E7E Mouse: is tagged by udev as: Mouse Pointingstick
[ 7.552] (II) event18 - CUST0001:00 06CB:7E7E Mouse: device is a pointer
[ 7.556] (II) config/udev: Adding input device CUST0001:00 06CB:7E7E Mouse (/dev/input/mouse0)
[ 7.556] (II) No input driver specified, ignoring this device.
[ 7.556] (II) This device may have been added with another device file.
[ 7.557] (II) config/udev: Adding input device CUST0001:00 06CB:7E7E Touchpad (/dev/input/event19)
[ 7.557] (**) CUST0001:00 06CB:7E7E Touchpad: Applying InputClass "libinput touchpad catchall"
[ 7.557] (II) Using input driver 'libinput' for 'CUST0001:00 06CB:7E7E Touchpad'
[ 7.557] (**) CUST0001:00 06CB:7E7E Touchpad: always reports core events
[ 7.557] (**) Option "Device" "/dev/input/event19"
[ 7.557] (**) Option "_source" "server/udev"
[ 7.561] (II) event19 - CUST0001:00 06CB:7E7E Touchpad: is tagged by udev as: Touchpad
[ 7.564] (II) event19 - CUST0001:00 06CB:7E7E Touchpad: device is a touchpad
[ 7.565] (II) event19 - CUST0001:00 06CB:7E7E Touchpad: device removed
[ 7.608] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-2/i2c-CUST0001:00/0018:06CB:7E7E.0001/input/input34/event19"
[ 7.608] (II) XINPUT: Adding extended input device "CUST0001:00 06CB:7E7E Touchpad" (type: TOUCHPAD, id 17)
[ 7.612] (**) Option "AccelerationScheme" "none"
[ 7.612] (**) CUST0001:00 06CB:7E7E Touchpad: (accel) selected scheme none/0
[ 7.612] (**) CUST0001:00 06CB:7E7E Touchpad: (accel) acceleration factor: 2.000
[ 7.612] (**) CUST0001:00 06CB:7E7E Touchpad: (accel) acceleration threshold: 4
[ 7.615] (II) event19 - CUST0001:00 06CB:7E7E Touchpad: is tagged by udev as: Touchpad
[ 7.619] (II) event19 - CUST0001:00 06CB:7E7E Touchpad: device is a touchpad
[ 7.621] (II) config/udev: Adding input device CUST0001:00 06CB:7E7E Touchpad (/dev/input/mouse1)
[ 7.621] (II) No input driver specified, ignoring this device.
[ 7.621] (II) This device may have been added with another device file.
[ 7.622] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event20)
[ 7.622] (II) No input driver specified, ignoring this device.
[ 7.622] (II) This device may have been added with another device file.
[ 7.623] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event21)
[ 7.623] (II) No input driver specified, ignoring this device.
[ 7.623] (II) This device may have been added with another device file.
[ 7.624] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event22)
[ 7.624] (II) No input driver specified, ignoring this device.
[ 7.624] (II) This device may have been added with another device file.
[ 7.625] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event23)
[ 7.625] (II) No input driver specified, ignoring this device.
[ 7.625] (II) This device may have been added with another device file.
[ 7.625] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event24)
[ 7.625] (II) No input driver specified, ignoring this device.
[ 7.625] (II) This device may have been added with another device file.
[ 7.626] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event25)
[ 7.626] (II) No input driver specified, ignoring this device.
[ 7.626] (II) This device may have been added with another device file.
[ 7.627] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event26)
[ 7.627] (II) No input driver specified, ignoring this device.
[ 7.627] (II) This device may have been added with another device file.
[ 7.628] (II) config/udev: Adding input device gpio-keys (/dev/input/event8)
[ 7.628] (II) No input driver specified, ignoring this device.
[ 7.628] (II) This device may have been added with another device file.
[ 7.629] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 7.629] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 7.629] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 7.629] (**) AT Translated Set 2 keyboard: always reports core events
[ 7.629] (**) Option "Device" "/dev/input/event4"
[ 7.629] (**) Option "_source" "server/udev"
[ 7.632] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 7.632] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 7.634] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 7.656] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 7.656] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18)
[ 7.656] (**) Option "xkb_model" "pc105"
[ 7.656] (**) Option "xkb_layout" "fr"
[ 7.659] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 7.659] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 7.662] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event27)
[ 7.662] (**) PS/2 Generic Mouse: Applying InputClass "libinput pointer catchall"
[ 7.662] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[ 7.662] (**) PS/2 Generic Mouse: always reports core events
[ 7.662] (**) Option "Device" "/dev/input/event27"
[ 7.662] (**) Option "_source" "server/udev"
[ 7.665] (II) event27 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[ 7.665] (II) event27 - PS/2 Generic Mouse: device is a pointer
[ 7.666] (II) event27 - PS/2 Generic Mouse: device removed
[ 7.696] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event27"
[ 7.696] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 19)
[ 7.696] (**) Option "AccelerationScheme" "none"
[ 7.696] (**) PS/2 Generic Mouse: (accel) selected scheme none/0
[ 7.696] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 7.696] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 7.698] (II) event27 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[ 7.699] (II) event27 - PS/2 Generic Mouse: device is a pointer
[ 7.700] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse3)
[ 7.700] (II) No input driver specified, ignoring this device.
[ 7.700] (II) This device may have been added with another device file.
[ 7.705] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event7)
[ 7.705] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 7.705] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[ 7.705] (**) MSI WMI hotkeys: always reports core events
[ 7.705] (**) Option "Device" "/dev/input/event7"
[ 7.705] (**) Option "_source" "server/udev"
[ 7.707] (II) event7 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 7.707] (II) event7 - MSI WMI hotkeys: device is a keyboard
[ 7.707] (II) event7 - MSI WMI hotkeys: device removed
[ 7.728] (**) Option "config_info" "udev:/sys/devices/virtual/input/input27/event7"
[ 7.728] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 20)
[ 7.728] (**) Option "xkb_model" "pc105"
[ 7.728] (**) Option "xkb_layout" "fr"
[ 7.730] (II) event7 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 7.730] (II) event7 - MSI WMI hotkeys: device is a keyboard
[ 7.740] (**) SteelSeries SteelSeries KLC: Applying InputClass "libinput keyboard catchall"
[ 7.740] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries KLC'
[ 7.740] (**) SteelSeries SteelSeries KLC: always reports core events
[ 7.740] (**) Option "Device" "/dev/input/event9"
[ 7.740] (**) Option "_source" "_driver/libinput"
[ 7.740] (II) libinput: SteelSeries SteelSeries KLC: is a virtual subdevice
[ 7.740] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:1038:1122.0003/input/input12/event9"
[ 7.740] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries KLC" (type: KEYBOARD, id 21)
[ 7.740] (**) Option "xkb_model" "pc105"
[ 7.740] (**) Option "xkb_layout" "fr"
[ 7.742] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse3)
[ 7.742] (II) No input driver specified, ignoring this device.
[ 7.742] (II) This device may have been added with another device file.
[ 7.742] (II) config/udev: removing device PS/2 Generic Mouse
[ 7.742] (II) event27 - PS/2 Generic Mouse: device removed
[ 7.792] (II) UnloadModule: "libinput"
[ 7.792] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event27)
[ 7.792] (**) PS/2 Generic Mouse: Applying InputClass "libinput pointer catchall"
[ 7.792] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[ 7.792] (**) PS/2 Generic Mouse: always reports core events
[ 7.793] (**) Option "Device" "/dev/input/event27"
[ 7.793] (**) Option "_source" "server/udev"
[ 7.795] (II) event27 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[ 7.795] (II) event27 - PS/2 Generic Mouse: device is a pointer
[ 7.796] (II) event27 - PS/2 Generic Mouse: device removed
[ 7.832] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event27"
[ 7.832] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 19)
[ 7.832] (**) Option "AccelerationScheme" "none"
[ 7.832] (**) PS/2 Generic Mouse: (accel) selected scheme none/0
[ 7.832] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 7.832] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 7.834] (II) event27 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[ 7.835] (II) event27 - PS/2 Generic Mouse: device is a pointer
[ 7.836] (EE) Failed to open authorization file "/var/run/sddm/{ad497af8-9c6e-47c5-8007-2474445643f1}": No such file or directory
[ 7.908] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): connected
[ 7.908] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): Internal TMDS
[ 7.908] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): 600.0 MHz maximum pixel clock
[ 7.908] (--) NVIDIA(GPU-0):
[ 7.957] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): connected
[ 7.957] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): Internal TMDS
[ 7.957] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): 600.0 MHz maximum pixel clock
[ 7.957] (--) NVIDIA(GPU-0):
[ 8.003] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): connected
[ 8.003] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): Internal TMDS
[ 8.003] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): 600.0 MHz maximum pixel clock
[ 8.003] (--) NVIDIA(GPU-0):
[ 8.006] (II) NVIDIA(0): Setting mode "NULL"
[ 8.040] (II) NVIDIA(0): Setting mode "HDMI-0: nvidia-auto-select @1680x1050 +0+0 {AllowGSYNC=Off, ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 8.146] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): connected
[ 8.146] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): Internal TMDS
[ 8.146] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): 600.0 MHz maximum pixel clock
[ 8.146] (--) NVIDIA(GPU-0):
[ 82.933] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): connected
[ 82.933] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): Internal TMDS
[ 82.933] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): 600.0 MHz maximum pixel clock
[ 82.933] (--) NVIDIA(GPU-0):
[ 85.072] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): connected
[ 85.072] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): Internal TMDS
[ 85.072] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VW220 (DFP-0): 600.0 MHz maximum pixel clock
[ 85.072] (--) NVIDIA(GPU-0): Le résultat des commandes xrandr suivant les pilotes utilisés :
cervin:~$ xrandr (avec pilotes Nvidia 470)
Screen 0: minimum 8 x 8, current 1680 x 1050, maximum 32767 x 32767
HDMI-0 connected primary 1680x1050+0+0 (normal left inverted right x axis y axis) 433mm x 271mm
1680x1050 59.95*+ 74.89
1920x1080 59.94
1440x900 59.89
1280x1024 75.02 60.02
1280x960 60.00
1280x800 59.81
1280x720 60.00 59.94
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x480 59.94 59.94
640x480 75.00 72.81 59.94
cervin:~$ xrandr(avec pilotes Xorg)
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 382mm x 215mm
1920x1080 59.96 60.01* 59.93
1680x1050 74.89 69.88 59.95 59.88
1600x1024 60.17
1400x1050 74.76 70.00 59.98
1600x900 59.95 59.82
1280x1024 75.02 60.02
1440x900 59.89
1400x900 59.96 59.88
1280x960 60.00
1368x768 59.88 59.85 Le résultat de la commande lspci :
ervin:~$ lspci -vnn | grep -A12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel"
00:02.0 VGA compatible controller [0300]: Intel Corporation UHD Graphics [8086:9bc4] (rev 05) (prog-if 00 [VGA controller])
Kernel driver in use: i915
Kernel modules: i915
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:2520] (rev a1) (prog-if 00 [VGA controller])
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidiaLe résultat de la commande inxi :
cervin:~$ inxi -Fxz
System: Kernel: 5.11.0-44-generic x86_64 bits: 64 compiler: N/A Desktop: KDE Plasma 5.18.5
Distro: Ubuntu 20.04.3 LTS (Focal Fossa)
Machine: Type: Laptop System: Micro-Star product: GF75 Thin 10UEK v: REV:1.0 serial: <filter>
Mobo: Micro-Star model: MS-17F5 v: REV:1.0 serial: <filter> UEFI: American Megatrends v: E17F5IMS.101
date: 12/15/2020
Battery: ID-1: BAT1 charge: 51.9 Wh condition: 53.7/51.3 Wh (105%) model: MSI BIF0_9 status: Unknown
Device-1: hidpp_battery_0 model: Logitech Marathon Mouse/Performance Plus M705 charge: 55% (should be ignored)
status: Discharging
CPU: Topology: 6-Core model: Intel Core i7-10750H bits: 64 type: MT MCP arch: N/A L2 cache: 12.0 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 62399
Speed: 800 MHz min/max: 800/5000 MHz Core speeds (MHz): 1: 800 2: 4265 3: 3465 4: 1787 5: 1092 6: 800 7: 800 8: 800
9: 800 10: 800 11: 957 12: 800
Graphics: Device-1: Intel UHD Graphics vendor: Micro-Star MSI driver: i915 v: kernel bus ID: 00:02.0
Device-2: NVIDIA vendor: Micro-Star MSI driver: nvidia v: 470.86 bus ID: 01:00.0
Display: x11 server: X.Org 1.20.13 driver: nvidia resolution: 1680x1050~60Hz
OpenGL: renderer: NVIDIA GeForce RTX 3060 Laptop GPU/PCIe/SSE2 v: 4.6.0 NVIDIA 470.86 direct render: Yes
Audio: Device-1: Intel Comet Lake PCH cAVS vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 00:1f.3
Device-2: NVIDIA vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 01:00.1
Sound Server: ALSA v: k5.11.0-44-generic
Network: Device-1: Intel Wi-Fi 6 AX201 driver: iwlwifi v: kernel port: 5000 bus ID: 00:14.3
IF: wlo1 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Micro-Star MSI driver: r8169 v: kernel
port: 3000 bus ID: 03:00.0
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 1.14 TiB used: 167.57 GiB (14.3%)
ID-1: /dev/nvme0n1 vendor: Western Digital model: PC SN530 SDBPNPZ-256G-1032 size: 238.47 GiB
ID-2: /dev/sda vendor: Seagate model: ST1000LM048-2E7172 size: 931.51 GiB
Partition: ID-1: / size: 233.24 GiB used: 18.38 GiB (7.9%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: /home size: 893.36 GiB used: 149.18 GiB (16.7%) fs: ext4 dev: /dev/sda1
Sensors: System Temperatures: cpu: 50.0 C mobo: N/A gpu: nvidia temp: 42 C
Fan Speeds (RPM): N/A
Info: Processes: 306 Uptime: 19m Memory: 15.45 GiB used: 1.82 GiB (11.8%) Init: systemd runlevel: 5 Compilers: gcc: 9.3.0
Shell: bash v: 5.0.17 inxi: 3.0.38 Le résultat de la commande dpkg :
cervin:~$ dpkg -l | grep nvidia
ii libnvidia-cfg1-470:amd64 470.86-0ubuntu0.20.04.2 amd64 NVIDIA binary OpenGL/GLX configuration library
ii libnvidia-common-470 470.86-0ubuntu0.20.04.2 all Shared files used by the NVIDIA libraries
ii libnvidia-compute-470:amd64 470.86-0ubuntu0.20.04.2 amd64 NVIDIA libcompute package
ii libnvidia-compute-470:i386 470.86-0ubuntu0.20.04.2 i386 NVIDIA libcompute package
ii libnvidia-decode-470:amd64 470.86-0ubuntu0.20.04.2 amd64 NVIDIA Video Decoding runtime libraries
ii libnvidia-decode-470:i386 470.86-0ubuntu0.20.04.2 i386 NVIDIA Video Decoding runtime libraries
ii libnvidia-encode-470:amd64 470.86-0ubuntu0.20.04.2 amd64 NVENC Video Encoding runtime library
ii libnvidia-encode-470:i386 470.86-0ubuntu0.20.04.2 i386 NVENC Video Encoding runtime library
ii libnvidia-extra-470:amd64 470.86-0ubuntu0.20.04.2 amd64 Extra libraries for the NVIDIA driver
ii libnvidia-fbc1-470:amd64 470.86-0ubuntu0.20.04.2 amd64 NVIDIA OpenGL-based Framebuffer Capture runtime library
ii libnvidia-fbc1-470:i386 470.86-0ubuntu0.20.04.2 i386 NVIDIA OpenGL-based Framebuffer Capture runtime library
ii libnvidia-gl-470:amd64 470.86-0ubuntu0.20.04.2 amd64 NVIDIA OpenGL/GLX/EGL/GLES GLVND libraries and Vulkan ICD
ii libnvidia-gl-470:i386 470.86-0ubuntu0.20.04.2 i386 NVIDIA OpenGL/GLX/EGL/GLES GLVND libraries and Vulkan ICD
ii libnvidia-ifr1-470:amd64 470.86-0ubuntu0.20.04.2 amd64 NVIDIA OpenGL-based Inband Frame Readback runtime library
ii libnvidia-ifr1-470:i386 470.86-0ubuntu0.20.04.2 i386 NVIDIA OpenGL-based Inband Frame Readback runtime library
ii nvidia-compute-utils-470 470.86-0ubuntu0.20.04.2 amd64 NVIDIA compute utilities
ii nvidia-dkms-470 470.86-0ubuntu0.20.04.2 amd64 NVIDIA DKMS package
ii nvidia-driver-470 470.86-0ubuntu0.20.04.2 amd64 NVIDIA driver metapackage
ii nvidia-kernel-common-470 470.86-0ubuntu0.20.04.2 amd64 Shared files used with the kernel module
ii nvidia-kernel-source-470 470.86-0ubuntu0.20.04.2 amd64 NVIDIA kernel source package
ii nvidia-prime 0.8.16~0.20.04.1 all Tools to enable NVIDIA's Prime
ii nvidia-settings 470.57.01-0ubuntu0.20.04.2 amd64 Tool for configuring the NVIDIA graphics driver
ii nvidia-utils-470 470.86-0ubuntu0.20.04.2 amd64 NVIDIA driver support binaries
ii screen-resolution-extra 0.18build1 all Extension for the nvidia-settings control panel
ii xserver-xorg-video-nvidia-470 470.86-0ubuntu0.20.04.2 amd64 NVIDIA binary Xorg driverLe résultat de la commande nvidia-smi :
cervin:~$ nvidia-smi
Mon Jan 10 18:42:04 2022
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 470.86 Driver Version: 470.86 CUDA Version: 11.4 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|===============================+======================+======================|
| 0 NVIDIA GeForce ... Off | 00000000:01:00.0 On | N/A |
| N/A 40C P8 11W / N/A | 312MiB / 5946MiB | 0% Default |
| | | N/A |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=============================================================================|
| 0 N/A N/A 1218 G /usr/lib/xorg/Xorg 132MiB |
| 0 N/A N/A 1646 G /usr/bin/kwin_x11 32MiB |
| 0 N/A N/A 1648 G /usr/bin/plasmashell 41MiB |
| 0 N/A N/A 1715 G /usr/lib/firefox/firefox 99MiB |
| 0 N/A N/A 2156 G /usr/lib/firefox/firefox 2MiB |
+-----------------------------------------------------------------------------+J'ai parcouru beaucoup de post à propos de "Ubuntu 20.04 RTX 3060" mais je n'ai pas trouvé de solution à mon problème.
Je précise que juste apès l'install du pilote Nvidia et du 1er reboot j'ai eu mes 2 écrans dans xrandr et j'ai réussi à les configurer avec nvidia-settings puis au démarrage suivant l'écran du laptop a disparu !
Dernière modification par Rando88 (Le 11/01/2022, à 22:10)
Hors ligne
#2 Le 10/01/2022, à 19:48
- xubu1957
Re : [Résolu]RTX 3060 double ecran impossible
Bonjour,
Montre aussi :
ubuntu-drivers devicesdpkg -l | grep -v ^ii_ _ _
> forums.developer.nvidia.com/t/rtx-3060-not-recognized/189020
Le secure-boot est-il désactivé ?
Dernière modification par xubu1957 (Le 10/01/2022, à 19:56)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#3 Le 10/01/2022, à 20:03
- Rando88
Re : [Résolu]RTX 3060 double ecran impossible
Oui, le secure boot est désactivé, j'ai eu besoin de le désactiver pour VirtualBox.
Le résultat de la commande ubuntu-drivers devices :
cervin:~$ ubuntu-drivers devices
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd00002520sv00001462sd000012F1bc03sc00i00
vendor : NVIDIA Corporation
driver : nvidia-driver-470-server - distro non-free
driver : nvidia-driver-460-server - distro non-free
driver : nvidia-driver-460 - distro non-free
driver : nvidia-driver-495 - distro non-free
driver : nvidia-driver-470 - distro non-free recommended
driver : xserver-xorg-video-nouveau - distro free builtinLe résultat de la commande dpkg -l | grep -v ^ii :
cervin:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom Version Architecture Description
+++-===========================================================-===========================================-============-======================================================================================================
rc linux-image-5.11.0-34-generic 5.11.0-34.36~20.04.1 amd64 Signed kernel image generic
rc linux-image-5.11.0-36-generic 5.11.0-36.40~20.04.1 amd64 Signed kernel image generic
rc linux-image-5.11.0-37-generic 5.11.0-37.41~20.04.2 amd64 Signed kernel image generic
rc linux-image-5.11.0-38-generic 5.11.0-38.42~20.04.1 amd64 Signed kernel image generic
rc linux-image-5.11.0-40-generic 5.11.0-40.44~20.04.2 amd64 Signed kernel image generic
rc linux-image-5.11.0-41-generic 5.11.0-41.45~20.04.1 amd64 Signed kernel image generic
rc linux-image-5.8.0-43-generic 5.8.0-43.49~20.04.1 amd64 Signed kernel image generic
rc linux-image-5.8.0-63-generic 5.8.0-63.71~20.04.1 amd64 Signed kernel image generic
rc linux-modules-5.11.0-34-generic 5.11.0-34.36~20.04.1 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-5.11.0-36-generic 5.11.0-36.40~20.04.1 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-5.11.0-37-generic 5.11.0-37.41~20.04.2 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-5.11.0-38-generic 5.11.0-38.42~20.04.1 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-5.11.0-40-generic 5.11.0-40.44~20.04.2 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-5.11.0-41-generic 5.11.0-41.45~20.04.1 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-5.8.0-43-generic 5.8.0-43.49~20.04.1 amd64 Linux kernel extra modules for version 5.8.0 on 64 bit x86 SMP
rc linux-modules-5.8.0-63-generic 5.8.0-63.71~20.04.1 amd64 Linux kernel extra modules for version 5.8.0 on 64 bit x86 SMP
rc linux-modules-extra-5.11.0-34-generic 5.11.0-34.36~20.04.1 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-extra-5.11.0-36-generic 5.11.0-36.40~20.04.1 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-extra-5.11.0-37-generic 5.11.0-37.41~20.04.2 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-extra-5.11.0-38-generic 5.11.0-38.42~20.04.1 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-extra-5.11.0-40-generic 5.11.0-40.44~20.04.2 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-extra-5.11.0-41-generic 5.11.0-41.45~20.04.1 amd64 Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc linux-modules-extra-5.8.0-43-generic 5.8.0-43.49~20.04.1 amd64 Linux kernel extra modules for version 5.8.0 on 64 bit x86 SMP
rc linux-modules-extra-5.8.0-63-generic 5.8.0-63.71~20.04.1 amd64 Linux kernel extra modules for version 5.8.0 on 64 bit x86 SMPHors ligne
#4 Le 10/01/2022, à 20:10
- xubu1957
Re : [Résolu]RTX 3060 double ecran impossible
Pour nettoyer :
Le 11/02/2017, moko138 a écrit :
Pour supprimer tous ces fichiers de configuration devenus sans objets et marqués "rc", et uniquement ces fichiers, exécute :
dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P
Pour info, les précisions de nany, pour la commande de nettoyage
_ _ _
Donne le retour de :
sudo apt updateConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#5 Le 10/01/2022, à 20:19
- Rando88
Re : [Résolu]RTX 3060 double ecran impossible
J'ai exécuté la purge.
Le retour de sudo apt update
cervin:~/Photos/2022_0102_Maconcourt$ sudo apt update
Atteint :1 http://fr.archive.ubuntu.com/ubuntu focal InRelease
Atteint :2 http://fr.archive.ubuntu.com/ubuntu focal-updates InRelease
Réception de :3 http://fr.archive.ubuntu.com/ubuntu focal-backports InRelease [108 kB]
Atteint :4 https://linux.teamviewer.com/deb stable InRelease
Atteint :5 http://security.ubuntu.com/ubuntu focal-security InRelease
108 ko réceptionnés en 1s (141 ko/s)
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Tous les paquets sont à jour.Hors ligne
#6 Le 10/01/2022, à 20:27
- xubu1957
Re : [Résolu]RTX 3060 double ecran impossible
Tu as regardé dans les Paramètres > Écrans pour l'agencement de l'Affichage ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#7 Le 10/01/2022, à 20:35
- Rando88
Re : [Résolu]RTX 3060 double ecran impossible
Oui, mais xrandr ne voit qu'un écran alors je n'ai qu'un écran apparent dans les paramètres d'affichage.
Hors ligne
#8 Le 10/01/2022, à 20:44
- xubu1957
Re : [Résolu]RTX 3060 double ecran impossible
Tu avais rendu persistantes les modifications ? (§ 1.6 1).
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#9 Le 10/01/2022, à 20:59
- bishop
Re : [Résolu]RTX 3060 double ecran impossible
Salut.
À voir https://doc.ubuntu-fr.org/multi-ecran
La plus grande surprise que puisse faire un con c'est de faire une pause.
Hors ligne
#10 Le 10/01/2022, à 21:05
- Rando88
Re : [Résolu]RTX 3060 double ecran impossible
Comme dit dans mon post de départ :
rando88 a écrit :
Je précise que juste apès l'install du pilote Nvidia et du 1er reboot j'ai eu mes 2 écrans dans xrandr et j'ai réussi à les configurer avec nvidia-settings puis au démarrage suivant l'écran du laptop a disparu !
J'avais mes 2 écrans dans xrandr et dans nvidia-settings et je n'ai rien configuré avec xrandr
Pour l'instant quand je suis avec les pilotes nvidia je n'ai que l'HDMI qui est détecté le eDP-1 n'est pas détecté et d'après ce que je comprends de xrandr il n'est pas possible d’ajouter un écran mais seulement d'ajouter des résolution ou des positions relatives.
Tant que je n'aurai pas mes 2 écrans dans xrandr je suis bloqué
Hors ligne
#11 Le 10/01/2022, à 21:31
- xubu1957
Re : [Résolu]RTX 3060 double ecran impossible
As-tu un support d'installation d'Ubuntu (DVD ou clé USB) ?
Pour appliquer la procédure > amorcer_sur_cd_ubuntu#amorcage et arriver à cette étape : essayer_ubuntu_sans_rien_changer_dans_votre_ordinateur et tester les écrans en session-live.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#12 Le 10/01/2022, à 21:38
- Rando88
Re : [Résolu]RTX 3060 double ecran impossible
A bishop :
retour de find /sys/devices/ -iname edid
cervin:~$ find /sys/devices/ -iname edid
/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1/card1-HDMI-A-1/edid
/sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/edidRetour de xrandr :
cervin:~$ xrandr
Screen 0: minimum 8 x 8, current 1680 x 1050, maximum 32767 x 32767
HDMI-0 connected primary 1680x1050+0+0 (normal left inverted right x axis y axis) 433mm x 271mm
1680x1050 59.95*+ 74.89
1920x1080 59.94
1440x900 59.89
1280x1024 75.02 60.02
1280x960 60.00
1280x800 59.81
1280x720 60.00 59.94Pour quelle raison xrandr ne "voit" pas eDP-1 ?
Qand j'aurai trouvé la raison je serai proche de la solution...
Hors ligne
#13 Le 10/01/2022, à 21:55
- Rando88
Re : [Résolu]RTX 3060 double ecran impossible
A xubu1957
J'ai fait l'essai avec ma clé USB :
Seulement l'écran eDP-1 est listé (et fonctionnel) par xrandr ce qui me semble cohérent puisque le pilote de la session live est Xorg. Le second ecran sur la sortie HDMI n'est pas détecté. Avec le pilote Xorg l'HDMI n'a jamais été détecté depuis que j'ai ce PC.
Hors ligne
#14 Le 10/01/2022, à 22:28
- xubu1957
Re : [Résolu]RTX 3060 double ecran impossible
Montre :
lsmod | sortConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#15 Le 10/01/2022, à 22:30
- Rando88
Re : [Résolu]RTX 3060 double ecran impossible
Le retour de lsmod | sort
cervin:/sys/bus/pci/drivers$ lsmod | sort
ac97_bus 16384 1 snd_soc_core
acpi_pad 184320 0
aesni_intel 372736 4
af_alg 28672 6 algif_hash,algif_skcipher
ahci 40960 1
algif_hash 16384 1
algif_skcipher 16384 1
autofs4 45056 2
binfmt_misc 24576 1
bluetooth 638976 41 btrtl,btintel,btbcm,bnep,btusb,rfcomm
bnep 24576 2
bpfilter 16384 0
btbcm 16384 1 btusb
btintel 28672 1 btusb
btrtl 24576 1 btusb
btusb 61440 0
cec 53248 2 drm_kms_helper,i915
cfg80211 888832 3 iwlmvm,iwlwifi,mac80211
cmac 16384 3
coretemp 20480 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 1
cryptd 24576 3 crypto_simd,ghash_clmulni_intel
crypto_simd 16384 1 aesni_intel
drm 548864 11 drm_kms_helper,nvidia,nvidia_drm,i915
drm_kms_helper 237568 2 nvidia_drm,i915
ecc 32768 1 ecdh_generic
ecdh_generic 16384 2 bluetooth
ee1004 20480 0
efi_pstore 16384 0
fb_sys_fops 16384 1 drm_kms_helper
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
gpio_keys 20480 0
hid 135168 6 i2c_hid,usbhid,hid_multitouch,hid_generic,hid_logitech_dj,hid_logitech_hidpp
hid_generic 16384 0
hid_logitech_dj 28672 0
hid_logitech_hidpp 45056 0
hid_multitouch 28672 0
i2c_algo_bit 16384 1 i915
i2c_hid 32768 0
i2c_i801 32768 0
i2c_smbus 20480 1 i2c_i801
i915 2297856 1
idma64 20480 0
input_leds 16384 0
intel_cstate 20480 0
intel_lpss 16384 1 intel_lpss_pci
intel_lpss_pci 20480 0
intel_pch_thermal 20480 0
intel_powerclamp 20480 0
intel_rapl_common 24576 1 intel_rapl_msr
intel_rapl_msr 20480 0
ip6table_filter 16384 1
ip6_tables 32768 53 ip6table_filter
ip6t_REJECT 16384 1
ip6t_rt 20480 3
iptable_filter 16384 1
ip_tables 32768 9 iptable_filter
ipt_REJECT 16384 1
iwlmvm 413696 0
iwlwifi 372736 1 iwlmvm
joydev 24576 0
kvm 823296 1 kvm_intel
kvm_intel 294912 0
ledtrig_audio 16384 2 snd_hda_codec_generic,snd_sof
libahci 36864 1 ahci
libarc4 16384 1 mac80211
libcrc32c 16384 1 nf_conntrack
lp 20480 0
mac80211 1024000 1 iwlmvm
mac_hid 16384 0
mei 122880 3 mei_hdcp,mei_me
mei_hdcp 24576 0
mei_me 40960 1
Module Size Used by
msi_wmi 20480 0
msr 16384 0
mxm_wmi 16384 0
nf_conntrack 147456 1 xt_conntrack
nf_defrag_ipv4 16384 1 nf_conntrack
nf_defrag_ipv6 24576 1 nf_conntrack
nf_log_common 16384 2 nf_log_ipv4,nf_log_ipv6
nf_log_ipv4 16384 5
nf_log_ipv6 16384 5
nf_reject_ipv4 16384 1 ipt_REJECT
nf_reject_ipv6 20480 1 ip6t_REJECT
nls_iso8859_1 16384 1
nvidia 35315712 810 nvidia_uvm,nvidia_modeset
nvidia_drm 61440 6
nvidia_modeset 1200128 15 nvidia_drm
nvidia_uvm 1032192 0
nvme 49152 2
nvme_core 122880 3 nvme
parport 65536 3 parport_pc,lp,ppdev
parport_pc 45056 0
pinctrl_cannonlake 36864 3
ppdev 24576 0
psmouse 155648 0
r8169 77824 0
rapl 20480 0
rc_core 61440 1 cec
realtek 28672 1
rfcomm 81920 16
sch_fq_codel 20480 2
serio_raw 20480 0
snd 94208 23 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_compress,snd_soc_core,snd_pcm,snd_rawmidi
snd_compress 28672 1 snd_soc_core
snd_hda_codec 147456 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek,snd_soc_hdac_hda
snd_hda_codec_generic 81920 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 61440 2
snd_hda_codec_realtek 139264 1
snd_hda_core 94208 9 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_hda_codec_realtek,snd_sof_intel_hda_common,snd_soc_hdac_hda,snd_sof_intel_hda
snd_hda_ext_core 32768 3 snd_sof_intel_hda_common,snd_soc_hdac_hda,snd_sof_intel_hda
snd_hda_intel 53248 5
snd_hwdep 16384 1 snd_hda_codec
snd_intel_dspcfg 28672 3 snd_hda_intel,snd_sof_pci,snd_sof_intel_hda_common
snd_pcm 114688 11 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,soundwire_intel,snd_sof,snd_sof_intel_hda_common,snd_sof_intel_ipc,snd_compress,snd_soc_core,snd_hda_core,snd_pcm_dmaengine
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_rawmidi 36864 1 snd_seq_midi
snd_seq 73728 2 snd_seq_midi,snd_seq_midi_event
snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi
snd_seq_midi 20480 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_soc_acpi 16384 3 snd_soc_acpi_intel_match,snd_sof_intel_hda_common,snd_sof_intel_byt
snd_soc_acpi_intel_match 49152 2 snd_sof_pci,snd_sof_intel_hda_common
snd_soc_core 286720 4 soundwire_intel,snd_sof,snd_sof_intel_hda_common,snd_soc_hdac_hda
snd_soc_hdac_hda 24576 1 snd_sof_intel_hda_common
snd_sof 126976 4 snd_sof_pci,snd_sof_intel_hda_common,snd_sof_intel_byt,snd_sof_intel_ipc
snd_sof_intel_byt 28672 1 snd_sof_pci
snd_sof_intel_hda 20480 1 snd_sof_intel_hda_common
snd_sof_intel_hda_common 94208 1 snd_sof_pci
snd_sof_intel_ipc 20480 1 snd_sof_intel_byt
snd_sof_pci 24576 0
snd_sof_xtensa_dsp 16384 2 snd_sof_intel_hda_common,snd_sof_intel_byt
snd_timer 40960 2 snd_seq,snd_pcm
soc_button_array 20480 0
soundcore 16384 1 snd
soundwire_bus 77824 3 soundwire_intel,soundwire_generic_allocation,soundwire_cadence
soundwire_cadence 32768 1 soundwire_intel
soundwire_generic_allocation 16384 1 soundwire_intel
soundwire_intel 40960 2 snd_sof_intel_hda_common,snd_intel_dspcfg
sparse_keymap 16384 1 msi_wmi
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
usbhid 57344 1 hid_logitech_dj
vboxdrv 516096 2 vboxnetadp,vboxnetflt
vboxnetadp 28672 0
vboxnetflt 28672 0
video 53248 2 msi_wmi,i915
virt_dma 20480 1 idma64
wmi 32768 3 wmi_bmof,msi_wmi,mxm_wmi
wmi_bmof 16384 0
x86_pkg_temp_thermal 20480 0
xhci_pci 20480 0
xhci_pci_renesas 20480 1 xhci_pci
x_tables 49152 13 ip6table_filter,xt_conntrack,iptable_filter,xt_LOG,xt_tcpudp,xt_addrtype,ip6t_rt,ip6_tables,ipt_REJECT,ip_tables,xt_limit,xt_hl,ip6t_REJECT
xt_addrtype 16384 4
xt_conntrack 16384 16
xt_hl 16384 22
xt_limit 16384 13
xt_LOG 20480 10
xt_tcpudp 20480 222Hors ligne
#16 Le 11/01/2022, à 11:17
- Rando88
Re : [Résolu]RTX 3060 double ecran impossible
J'ai avancé sur mon pb !
Avec ce post https://askubuntu.com/questions/1059965 … dia-driver
et la réponse 5 de Moisés Filho
J'ai renommé mes fichiers xorg.conf.nvidia-xconfig-original, xorg.conf.backup et xorg.conf
Au reboot j'ai mes 2 écrans actifs, je peux utiliser nvidia-settings mais dans l'onglet "X Server Display Configuration" j'ai le "PRIME Display: eDP-1-1" qui apparaît hachuré et grisé avec le message "PRIME Displays cannot be controlled by nvidia-settings and must be configured by an external RandR capable tool. The display is shown in the layout window above for informationnal purposes only"
Après des modifs sur l'écran externe avec nvidia-settings si je sauvegarde, un fichier xorg.conf est recréé et au reboot suivant je perd à nouveau l'écran interne !
J'ai tenté une génération du fichier xorg.conf avec "sudo Xorg -configure". mais ensuite plus de démarrage graphique possible.
Donc pour l'instant ça fonctionne mais c'est bancal... et quel est le risque d'avoir une install sans le fichier xorg.conf ?
Hors ligne
#17 Le 11/01/2022, à 22:09
- Rando88
Re : [Résolu]RTX 3060 double ecran impossible
Suite et fin....
La réponse sur un post Nvidia : https://forums.developer.nvidia.com/t/p … s/120315/4
"Like said, PRIME displays can’t be controlled by nvidia-settings since they’re not connected to the nvidia gpu.
Expected, no way around it, nada.
Simply use your DE’s monitor manager to arrange/adjust monitors"
En français :
Comme dit, les écrans PRIME ne peuvent pas être contrôlés par les paramètres nvidia car ils ne sont pas connectés au gpu nvidia.
Alors, pas moyen de contourner ça, nada.
Utilisez simplement le gestionnaire de moniteurs de votre distribution Linux pour organiser/ajuster les moniteurs.
Merci xubu1957 et bishop pour votre aide.
Hors ligne