Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

arzavapi · Le 08/01/2022, à 12:28

Merci

La commande bloque à

~/.cache$

Rien ne s'affiche...

J'ai dû couper le Terminal pour le redémarrer et faire les autres opérations...

mkdir blueman_old
mkdir: impossible de créer le répertoire «blueman_old»: Le fichier existe
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ 
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ mv blueman-applet-1000 blueman_old
mv: impossible d'évaluer 'blueman-applet-1000': Aucun fichier ou dossier de ce type
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ mv blueman-tray-1000 blueman_old
mv: impossible d'évaluer 'blueman-tray-1000': Aucun fichier ou dossier de ce type
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ sudo /etc/init.d/bluetooth start
[sudo] Mot de passe de pierre : 
Starting bluetooth (via systemctl): bluetooth.service.

Je ne vois toujours pas mon casque Bose Quietcomfort 35 apparaitre dans les périphériques

Dernière modification par arzavapi (Le 08/01/2022, à 12:32)

Nuliel · Le 08/01/2022, à 14:20

À quelle commande cela a bloqué? À la première commande mv? Parce que la première commande bloque le bluetooth, la deuxième change juste de dossier (ça bloque pas)

Dernière modification par Nuliel (Le 08/01/2022, à 14:20)

ylag · Le 08/01/2022, à 17:04

Bonjour,

Lorsque tu as vu :

~/.cache$

Normal que rien ne s'affiche : c'est la commande cd qui a placé ton utilisateur dans le répertoire /home/pierre/.cache, d'où la nouvelle invite de commande.

C'est à partir de là qu'il fallait passer la suite des commandes proposées par @Nuliel.

J'ai dû couper le Terminal pour le redémarrer et faire les autres opérations...

En redémarrant le terminal, ton utilisateur s'est replacé dans /home/pierre, et n'est plus positionné dans le répertoire /home/pierre/.cache contenant les fichiers à déplacer.
Les commandes mv ne trouvent plus les fichiers à déplacer, puisqu'ils sont dans /home/pierre/.cache, mais que tu lances ces commandes depuis ton répertoire personnel /home/Pierre.

A+

Dernière modification par ylag (Le 08/01/2022, à 17:31)

arzavapi · Le 08/01/2022, à 17:48

Merci de m'avertir ylag

Il fallait donc que j'écrive :

~/.cache$

et ensuite passer à la ligne pour écrire les autres commandes ?

Mais lorsqu'on fait entrée après avoir écrit

~/.cache$

ça repasse à la ligne suivante avec

~/.cache$

on peut donc y ajouter une commande ?

Dernière modification par arzavapi (Le 08/01/2022, à 17:56)

arzavapi · Le 08/01/2022, à 17:58

Donc voilà :

~$ sudo /etc/init.d/bluetooth stop
[sudo] Mot de passe de pierre : 
Stopping bluetooth (via systemctl): bluetooth.service.
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ cd ~/.cache
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~/.cache$ mkdir blueman_old
mkdir: impossible de créer le répertoire «blueman_old»: Le fichier existe
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~/.cache$ mv blueman-applet-1000 blueman_old
mv: impossible d'évaluer 'blueman-applet-1000': Aucun fichier ou dossier de ce type
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~/.cache$ mv blueman-tray-1000 blueman_old
mv: impossible d'évaluer 'blueman-tray-1000': Aucun fichier ou dossier de ce type
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~/.cache$ sudo /etc/init.d/bluetooth start
Starting bluetooth (via systemctl): bluetooth.service.
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~/.cache$

J'ai l'impression que cet ordi a fait un AVC -j'ai utilisé mon casque Bose Comfort Quiet 35 pendant 3 mois d'affilée sans problèmes auparavant
J'ai fait un rénitialisation de Ubuntu 20.04 LTS avec une clé USB - j'ai tout remis à "neuf"...

Ca marche pas pour mon casque Bose !!!

Dernière modification par arzavapi (Le 08/01/2022, à 18:03)

ylag · Le 08/01/2022, à 18:03

Bonsoir,

on peut donc y ajouter une commande ?

OUI !!
C'est de là qu'il faut passer les commandes mv.

Essaie ceci en une seule ligne, vu que le répertoire /home/pierre/.cache/blueman_old a déjà été créé :

cd /home/pierre/.cache ; mv blueman-applet-1000 blueman_old ; mv blueman-tray-1000 blueman_old ; cd

...ensuite, sur une autre ligne :

sudo /etc/init.d/bluetooth start

...puis retenter l'appairage ?

A+

arzavapi · Le 08/01/2022, à 18:48

Merci du conseil Ylag !!!

cd /home/pierre/.cache ; mv blueman-applet-1000 blueman_old ; mv blueman-tray-1000 blueman_old ; cd
mv: impossible d'évaluer 'blueman-applet-1000': Aucun fichier ou dossier de ce type
mv: impossible d'évaluer 'blueman-tray-1000': Aucun fichier ou dossier de ce type
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ sudo /etc/init.d/bluetooth start
[sudo] Mot de passe de pierre : 
Starting bluetooth (via systemctl): bluetooth.service.
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$

L'appairage ne se fait toujours pas...

Nuliel · Le 08/01/2022, à 18:49

Tu peux redonner

sudo service bluetooth status

?

arzavapi · Le 08/01/2022, à 19:24

Réponse :

● bluetooth.service - Bluetooth service
     Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
     Active: active (running) since Sat 2022-01-08 19:18:26 CET; 4min 57s ago
       Docs: man:bluetoothd(8)
   Main PID: 708 (bluetoothd)
     Status: "Running"
      Tasks: 1 (limit: 9374)
     Memory: 1.7M
     CGroup: /system.slice/bluetooth.service
             └─708 /usr/lib/bluetooth/bluetoothd

janv. 08 19:18:20 pierre-CR61-2M-CX61-2OC-CX61-2OD systemd[1]: Starting Bluetooth service...
janv. 08 19:18:21 pierre-CR61-2M-CX61-2OC-CX61-2OD bluetoothd[708]: Bluetooth daemon 5.53
janv. 08 19:18:26 pierre-CR61-2M-CX61-2OC-CX61-2OD systemd[1]: Started Bluetooth service.
janv. 08 19:18:26 pierre-CR61-2M-CX61-2OC-CX61-2OD bluetoothd[708]: Starting SDP server
janv. 08 19:18:26 pierre-CR61-2M-CX61-2OC-CX61-2OD bluetoothd[708]: Bluetooth management interface 1.19 initialized
janv. 08 19:19:13 pierre-CR61-2M-CX61-2OC-CX61-2OD bluetoothd[708]: Endpoint registered: sender=:1.70 path=/MediaEndpoint/A2DPSink/sbc
janv. 08 19:19:13 pierre-CR61-2M-CX61-2OC-CX61-2OD bluetoothd[708]: Endpoint registered: sender=:1.70 path=/MediaEndpoint/A2DPSource/sbc
~
~
~
~
~
lines 1-18/18 (END)

Nuliel · Le 08/01/2022, à 20:15

C'est bizarre, on dirait que le casque est vu vu que A2DP apparaît.
Tu peux redémarrer, tester un appairage et donner

dmesg

?

arzavapi · Le 08/01/2022, à 21:13

Merci Nuliel

Là c'est énorme !!

pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
[    0.000000] Linux version 5.11.0-44-generic (buildd@lcy02-amd64-042) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #48~20.04.2-Ubuntu SMP Tue Dec 14 15:36:44 UTC 2021 (Ubuntu 5.11.0-44.48~20.04.2-generic 5.11.22)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-44-generic root=UUID=5e1261b6-6225-47b4-9984-1afc7db7c2e4 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cbaa9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cbaaa000-0x00000000cbab0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cbab1000-0x00000000cc195fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cc196000-0x00000000cc3e1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cc3e2000-0x00000000db448fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db449000-0x00000000db4d2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000db4d3000-0x00000000db5edfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db5ee000-0x00000000dba1ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dba20000-0x00000000dbffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. CR61 2M/CX61 2OC/CX61 2OD/MS-16GD, BIOS E16GDIMS.20I 11/10/2014
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.426 MHz processor
[    0.000822] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000826] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000834] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[    0.000838] MTRR default type: uncachable
[    0.000840] MTRR fixed ranges enabled:
[    0.000842]   00000-9FFFF write-back
[    0.000843]   A0000-BFFFF uncachable
[    0.000845]   C0000-CFFFF write-protect
[    0.000846]   D0000-E7FFF uncachable
[    0.000847]   E8000-FFFFF write-protect
[    0.000848] MTRR variable ranges enabled:
[    0.000849]   0 base 0000000000 mask 7E00000000 write-back
[    0.000852]   1 base 0200000000 mask 7FE0000000 write-back
[    0.000854]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.000855]   3 base 00DE000000 mask 7FFE000000 uncachable
[    0.000857]   4 base 00DD000000 mask 7FFF000000 uncachable
[    0.000858]   5 base 021FE00000 mask 7FFFE00000 uncachable
[    0.000860]   6 disabled
[    0.000861]   7 disabled
[    0.000861]   8 disabled
[    0.000862]   9 disabled
[    0.000970] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001682] total RAM covered: 8142M
[    0.001989] Found optimal setting for mtrr clean up
[    0.001990]  gran_size: 64K 	chunk_size: 64M 	num_reg: 8  	lose cover RAM: 0G
[    0.002295] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[    0.002301] last_pfn = 0xdc000 max_arch_pfn = 0x400000000
[    0.010625] found SMP MP-table at [mem 0x000fd760-0x000fd76f]
[    0.017874] check: Scanning 1 areas for low memory corruption
[    0.017879] Using GB pages for direct mapping
[    0.018508] RAMDISK: [mem 0x3110d000-0x3487dfff]
[    0.018515] ACPI: Early table checksum verification disabled
[    0.018518] ACPI: RSDP 0x00000000000F0490 000024 (v02 MSI_NB)
[    0.018523] ACPI: XSDT 0x00000000DB9F2088 000094 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.018530] ACPI: FACP 0x00000000DBA011E8 00010C (v05 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.018536] ACPI: DSDT 0x00000000DB9F21B8 00F02E (v02 MSI_NB MEGABOOK 00000014 INTL 20120711)
[    0.018540] ACPI: FACS 0x00000000DBA1E080 000040
[    0.018544] ACPI: APIC 0x00000000DBA012F8 000062 (v03 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.018547] ACPI: FPDT 0x00000000DBA01360 000044 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.018551] ACPI: LPIT 0x00000000DBA013A8 00005C (v01 MSI_NB MEGABOOK 00000000 AMI. 00000005)
[    0.018555] ACPI: SSDT 0x00000000DBA01408 000228 (v01 INTEL  sensrhub 00000000 INTL 20120711)
[    0.018559] ACPI: SLIC 0x00000000DBA01630 000176 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.018562] ACPI: SSDT 0x00000000DBA017A8 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.018566] ACPI: SSDT 0x00000000DBA01CE8 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.018570] ACPI: MCFG 0x00000000DBA027C0 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[    0.018574] ACPI: HPET 0x00000000DBA02800 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
[    0.018578] ACPI: SSDT 0x00000000DBA02838 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.018582] ACPI: SSDT 0x00000000DBA02B50 003562 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.018585] ACPI: SSDT 0x00000000DBA060B8 001342 (v01 SgRef  SgPeg    00001000 INTL 20120711)
[    0.018589] ACPI: MSFF 0x00000000DBA07400 000029 (v01 MSI_NB MEGABOOK 00000010 AMI  00010013)
[    0.018592] ACPI: Reserving FACP table memory at [mem 0xdba011e8-0xdba012f3]
[    0.018594] ACPI: Reserving DSDT table memory at [mem 0xdb9f21b8-0xdba011e5]
[    0.018596] ACPI: Reserving FACS table memory at [mem 0xdba1e080-0xdba1e0bf]
[    0.018597] ACPI: Reserving APIC table memory at [mem 0xdba012f8-0xdba01359]
[    0.018598] ACPI: Reserving FPDT table memory at [mem 0xdba01360-0xdba013a3]
[    0.018599] ACPI: Reserving LPIT table memory at [mem 0xdba013a8-0xdba01403]
[    0.018600] ACPI: Reserving SSDT table memory at [mem 0xdba01408-0xdba0162f]
[    0.018601] ACPI: Reserving SLIC table memory at [mem 0xdba01630-0xdba017a5]
[    0.018603] ACPI: Reserving SSDT table memory at [mem 0xdba017a8-0xdba01ce0]
[    0.018604] ACPI: Reserving SSDT table memory at [mem 0xdba01ce8-0xdba027bf]
[    0.018605] ACPI: Reserving MCFG table memory at [mem 0xdba027c0-0xdba027fb]
[    0.018606] ACPI: Reserving HPET table memory at [mem 0xdba02800-0xdba02837]
[    0.018607] ACPI: Reserving SSDT table memory at [mem 0xdba02838-0xdba02b4c]
[    0.018608] ACPI: Reserving SSDT table memory at [mem 0xdba02b50-0xdba060b1]
[    0.018610] ACPI: Reserving SSDT table memory at [mem 0xdba060b8-0xdba073f9]
[    0.018611] ACPI: Reserving MSFF table memory at [mem 0xdba07400-0xdba07428]
[    0.018624] ACPI: Local APIC address 0xfee00000
[    0.018714] No NUMA configuration found
[    0.018715] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[    0.018726] NODE_DATA(0) allocated [mem 0x21fdd4000-0x21fdfdfff]
[    0.019022] Zone ranges:
[    0.019023]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.019026]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.019028]   Normal   [mem 0x0000000100000000-0x000000021fdfffff]
[    0.019030]   Device   empty
[    0.019031] Movable zone start for each node
[    0.019035] Early memory node ranges
[    0.019036]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.019038]   node   0: [mem 0x0000000000100000-0x00000000cbaa9fff]
[    0.019039]   node   0: [mem 0x00000000cbab1000-0x00000000cc195fff]
[    0.019040]   node   0: [mem 0x00000000cc3e2000-0x00000000db448fff]
[    0.019041]   node   0: [mem 0x00000000db4d3000-0x00000000db5edfff]
[    0.019042]   node   0: [mem 0x00000000dbfff000-0x00000000dbffffff]
[    0.019043]   node   0: [mem 0x0000000100000000-0x000000021fdfffff]
[    0.019045] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[    0.019048] On node 0 totalpages: 2076846
[    0.019049]   DMA zone: 64 pages used for memmap
[    0.019050]   DMA zone: 21 pages reserved
[    0.019051]   DMA zone: 3996 pages, LIFO batch:0
[    0.019053]   DMA32 zone: 13965 pages used for memmap
[    0.019054]   DMA32 zone: 893714 pages, LIFO batch:63
[    0.019056]   Normal zone: 18424 pages used for memmap
[    0.019057]   Normal zone: 1179136 pages, LIFO batch:63
[    0.019059] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.019085] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.025103] On node 0, zone DMA32: 7 pages in unavailable ranges
[    0.025560] On node 0, zone DMA32: 588 pages in unavailable ranges
[    0.025566] On node 0, zone DMA32: 138 pages in unavailable ranges
[    0.025595] On node 0, zone DMA32: 2577 pages in unavailable ranges
[    0.034310] On node 0, zone Normal: 16384 pages in unavailable ranges
[    0.034318] On node 0, zone Normal: 512 pages in unavailable ranges
[    0.034336] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff]
[    0.034417] ACPI: PM-Timer IO Port: 0x1808
[    0.034420] ACPI: Local APIC address 0xfee00000
[    0.034427] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.034438] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.034441] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.034443] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.034445] ACPI: IRQ0 used by override.
[    0.034447] ACPI: IRQ9 used by override.
[    0.034449] Using ACPI (MADT) for SMP configuration information
[    0.034450] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.034455] TSC deadline timer available
[    0.034456] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.034478] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.034480] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.034482] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.034483] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.034484] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.034486] PM: hibernation: Registered nosave memory: [mem 0xcbaaa000-0xcbab0fff]
[    0.034488] PM: hibernation: Registered nosave memory: [mem 0xcc196000-0xcc3e1fff]
[    0.034490] PM: hibernation: Registered nosave memory: [mem 0xdb449000-0xdb4d2fff]
[    0.034492] PM: hibernation: Registered nosave memory: [mem 0xdb5ee000-0xdba1ffff]
[    0.034493] PM: hibernation: Registered nosave memory: [mem 0xdba20000-0xdbffefff]
[    0.034495] PM: hibernation: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[    0.034496] PM: hibernation: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[    0.034497] PM: hibernation: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.034498] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.034499] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.034500] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.034501] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.034502] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.034503] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.034503] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.034504] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.034505] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.034506] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.034507] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.034509] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.034511] Booting paravirtualized kernel on bare hardware
[    0.034513] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.034522] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.034689] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u1048576
[    0.034697] pcpu-alloc: s192512 r8192 d28672 u1048576 alloc=1*2097152
[    0.034700] pcpu-alloc: [0] 0 1 
[    0.034730] Built 1 zonelists, mobility grouping on.  Total pages: 2044372
[    0.034732] Policy zone: Normal
[    0.034734] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-44-generic root=UUID=5e1261b6-6225-47b4-9984-1afc7db7c2e4 ro quiet splash vt.handoff=7
[    0.035244] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.035463] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.035501] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.060762] Memory: 7999296K/8307384K available (14345K kernel code, 3481K rwdata, 10348K rodata, 2684K init, 5980K bss, 307828K reserved, 0K cma-reserved)
[    0.060769] random: get_random_u64 called from __kmem_cache_create+0x2d/0x430 with crng_init=0
[    0.060893] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.060907] Kernel/User page tables isolation: enabled
[    0.060922] ftrace: allocating 48717 entries in 191 pages
[    0.078910] ftrace: allocated 191 pages with 7 groups
[    0.079024] rcu: Hierarchical RCU implementation.
[    0.079025] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.079027] 	Rude variant of Tasks RCU enabled.
[    0.079028] 	Tracing variant of Tasks RCU enabled.
[    0.079029] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.079030] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.083300] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.083598] random: crng done (trusting CPU's manufacturer)
[    0.083617] vt handoff: transparent VT on vt#7
[    0.083624] Console: colour dummy device 80x25
[    0.083642] printk: console [tty0] enabled
[    0.083661] ACPI: Core revision 20201113
[    0.083788] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.083803] APIC: Switch to symmetric I/O mode setup
[    0.084197] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.103803] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2283a601077, max_idle_ns: 440795304014 ns
[    0.103809] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.85 BogoMIPS (lpj=9577704)
[    0.103812] pid_max: default: 32768 minimum: 301
[    0.103837] LSM: Security Framework initializing
[    0.103846] Yama: becoming mindful.
[    0.103876] AppArmor: AppArmor initialized
[    0.103922] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.103940] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.104211] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.104224] process: using mwait in idle threads
[    0.104227] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.104228] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.104231] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.104233] Spectre V2 : Mitigation: Full generic retpoline
[    0.104234] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.104235] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.104236] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.104238] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.104241] SRBDS: Mitigation: Microcode
[    0.104242] MDS: Mitigation: Clear CPU buffers
[    0.104459] Freeing SMP alternatives memory: 40K
[    0.107883] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1024
[    0.107891] smpboot: CPU0: Intel(R) Pentium(R) CPU 3560M @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.108044] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.108072] ... version:                3
[    0.108073] ... bit width:              48
[    0.108073] ... generic registers:      8
[    0.108074] ... value mask:             0000ffffffffffff
[    0.108075] ... max period:             00007fffffffffff
[    0.108076] ... fixed-purpose events:   3
[    0.108077] ... event mask:             00000007000000ff
[    0.108189] rcu: Hierarchical SRCU implementation.
[    0.108754] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.108799] smp: Bringing up secondary CPUs ...
[    0.108890] x86: Booting SMP configuration:
[    0.108891] .... node  #0, CPUs:      #1
[    0.111422] smp: Brought up 1 node, 2 CPUs
[    0.111422] smpboot: Max logical packages: 1
[    0.111422] smpboot: Total of 2 processors activated (9577.70 BogoMIPS)
[    0.112083] devtmpfs: initialized
[    0.112083] x86/mm: Memory block size: 128MB
[    0.112474] PM: Registering ACPI NVS region [mem 0xcbaaa000-0xcbab0fff] (28672 bytes)
[    0.112474] PM: Registering ACPI NVS region [mem 0xdb5ee000-0xdba1ffff] (4399104 bytes)
[    0.112474] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.112474] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.112474] pinctrl core: initialized pinctrl subsystem
[    0.112474] PM: RTC time: 20:00:35, date: 2022-01-08
[    0.112474] NET: Registered protocol family 16
[    0.112474] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.112474] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.112511] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.112519] audit: initializing netlink subsys (disabled)
[    0.112528] audit: type=2000 audit(1641672035.028:1): state=initialized audit_enabled=0 res=1
[    0.112528] thermal_sys: Registered thermal governor 'fair_share'
[    0.112528] thermal_sys: Registered thermal governor 'bang_bang'
[    0.112528] thermal_sys: Registered thermal governor 'step_wise'
[    0.112528] thermal_sys: Registered thermal governor 'user_space'
[    0.112528] thermal_sys: Registered thermal governor 'power_allocator'
[    0.112528] EISA bus registered
[    0.112528] cpuidle: using governor ladder
[    0.112528] cpuidle: using governor menu
[    0.112528] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.112528] ACPI: bus type PCI registered
[    0.112528] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.112528] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.112528] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.112528] PCI: Using configuration type 1 for base access
[    0.112528] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.112528] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.113076] Kprobes globally optimized
[    0.113080] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.113080] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.115891] ACPI: Added _OSI(Module Device)
[    0.115893] ACPI: Added _OSI(Processor Device)
[    0.115894] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.115895] ACPI: Added _OSI(Processor Aggregator Device)
[    0.115896] ACPI: Added _OSI(Linux-Dell-Video)
[    0.115898] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.115899] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.129963] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.131854] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.133099] ACPI: Dynamic OEM Table Load:
[    0.133106] ACPI: SSDT 0xFFFF954F40859400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.134442] ACPI: Dynamic OEM Table Load:
[    0.134448] ACPI: SSDT 0xFFFF954F40380000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.135839] ACPI: Dynamic OEM Table Load:
[    0.135844] ACPI: SSDT 0xFFFF954F4084A400 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.137201] ACPI: EC: EC started
[    0.137202] ACPI: EC: interrupt blocked
[    0.139171] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.139174] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[    0.139176] ACPI: Interpreter enabled
[    0.139208] ACPI: (supports S0 S3 S4 S5)
[    0.139210] ACPI: Using IOAPIC for interrupt routing
[    0.139247] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.139680] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.156517] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.156526] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.157354] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.157356] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.158043] PCI host bridge to bus 0000:00
[    0.158046] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.158049] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.158050] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.158052] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.158054] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window]
[    0.158055] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.158068] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.158184] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.158225] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.158406] pci 0000:00:02.0: [8086:0406] type 00 class 0x030000
[    0.158416] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.158423] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.158427] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.158547] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.158556] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
[    0.158705] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.158723] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[    0.158782] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.158896] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.158913] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit]
[    0.158976] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.159084] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.159100] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff]
[    0.159180] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.159299] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.159316] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[    0.159388] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.159499] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.159635] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.159770] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.159857] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.160037] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[    0.160115] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.160301] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.160317] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
[    0.160400] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.160519] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.160725] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.160737] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.160745] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.160752] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.160760] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.160768] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.160775] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
[    0.160811] pci 0000:00:1f.2: PME# supported from D3hot
[    0.160915] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.160932] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
[    0.160952] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.161108] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.161172] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.161545] pci 0000:03:00.0: [1969:1091] type 00 class 0x020000
[    0.161790] pci 0000:03:00.0: reg 0x10: [mem 0xf7d00000-0xf7d3ffff 64bit]
[    0.161892] pci 0000:03:00.0: reg 0x18: [io  0xe000-0xe07f]
[    0.162864] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.163678] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.163683] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.163687] pci 0000:00:1c.3:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.163779] pci 0000:04:00.0: [10ec:8723] type 00 class 0x028000
[    0.163803] pci 0000:04:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.163835] pci 0000:04:00.0: reg 0x18: [mem 0xf7c00000-0xf7c03fff 64bit]
[    0.163966] pci 0000:04:00.0: supports D1 D2
[    0.163967] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.164097] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.164102] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.164105] pci 0000:00:1c.5:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.166196] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.166278] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.166356] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.166434] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.166512] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.166590] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.166668] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.166745] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.167060] ACPI: EC: interrupt unblocked
[    0.167061] ACPI: EC: event unblocked
[    0.167066] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.167067] ACPI: EC: GPE=0x17
[    0.167068] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[    0.167071] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[    0.167824] iommu: Default domain type: Translated 
[    0.167988] SCSI subsystem initialized
[    0.167994] libata version 3.00 loaded.
[    0.167994] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.167994] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.167994] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.167994] vgaarb: loaded
[    0.167994] ACPI: bus type USB registered
[    0.167994] usbcore: registered new interface driver usbfs
[    0.167994] usbcore: registered new interface driver hub
[    0.167994] usbcore: registered new device driver usb
[    0.167994] pps_core: LinuxPPS API ver. 1 registered
[    0.167994] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.167994] PTP clock support registered
[    0.167994] EDAC MC: Ver: 3.0.0
[    0.167994] NetLabel: Initializing
[    0.167994] NetLabel:  domain hash size = 128
[    0.167994] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.167994] NetLabel:  unlabeled traffic allowed by default
[    0.167994] PCI: Using ACPI for IRQ routing
[    0.172718] PCI: pci_cache_line_size set to 64 bytes
[    0.172883] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.172885] e820: reserve RAM buffer [mem 0xcbaaa000-0xcbffffff]
[    0.172886] e820: reserve RAM buffer [mem 0xcc196000-0xcfffffff]
[    0.172888] e820: reserve RAM buffer [mem 0xdb449000-0xdbffffff]
[    0.172889] e820: reserve RAM buffer [mem 0xdb5ee000-0xdbffffff]
[    0.172890] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[    0.172895] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.172895] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.175831] clocksource: Switched to clocksource tsc-early
[    0.185951] VFS: Disk quotas dquot_6.6.0
[    0.185967] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.186079] AppArmor: AppArmor Filesystem Enabled
[    0.186107] pnp: PnP ACPI init
[    0.186248] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.186256] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.186519] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.186522] system 00:01: [io  0xffff] has been reserved
[    0.186524] system 00:01: [io  0xffff] has been reserved
[    0.186526] system 00:01: [io  0xffff] has been reserved
[    0.186528] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.186529] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.186531] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.186533] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.186534] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.186536] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.186541] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.186565] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.186627] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.186632] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.186694] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.186696] system 00:04: [io  0x034c-0x034f] has been reserved
[    0.186700] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.187338] pnp 00:05: Plug and Play ACPI device, IDs PNP030b (active)
[    0.187400] pnp 00:06: Plug and Play ACPI device, IDs ETD0300 PNP0f13 (active)
[    0.188143] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.188146] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.188148] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.188150] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.188152] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.188153] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.188155] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.188157] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.188159] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.188161] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.188162] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.188164] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.188168] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.188509] pnp: PnP ACPI: found 8 devices
[    0.193977] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.194037] NET: Registered protocol family 2
[    0.194126] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.195542] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.195588] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.195720] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.195841] TCP: Hash tables configured (established 65536 bind 65536)
[    0.195917] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.195964] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.195990] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.196042] NET: Registered protocol family 1
[    0.196047] NET: Registered protocol family 44
[    0.196055] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.196059] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.196062] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.196072] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[    0.196077] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.196081] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.196084] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.196091] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.196094] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.196100] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf3fffff]
[    0.196104] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.196110] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.196113] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.196118] pci 0000:00:1c.3:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.196126] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.196128] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.196133] pci 0000:00:1c.5:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.196141] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.196143] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.196145] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.196146] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window]
[    0.196148] pci_bus 0000:00: resource 8 [mem 0xdf200000-0xfeafffff window]
[    0.196150] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.196151] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf3fffff]
[    0.196153] pci_bus 0000:02: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.196154] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.196156] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.196157] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.196159] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.196336] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.219912] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x640 took 22766 usecs
[    0.243908] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x640 took 23410 usecs
[    0.243924] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.243969] PCI: CLS 64 bytes, default 64
[    0.244010] Trying to unpack rootfs image as initramfs...
[    0.386277] Freeing initrd memory: 56772K
[    0.386302] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.386304] software IO TLB: mapped [mem 0x00000000d7449000-0x00000000db449000] (64MB)
[    0.386500] check: Scanning for low memory corruption every 60 seconds
[    0.386880] Initialise system trusted keyrings
[    0.386891] Key type blacklist registered
[    0.386923] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.388081] zbud: loaded
[    0.388336] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.388458] fuse: init (API version 7.33)
[    0.388591] integrity: Platform Keyring initialized
[    0.400631] Key type asymmetric registered
[    0.400633] Asymmetric key parser 'x509' registered
[    0.400641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.400669] io scheduler mq-deadline registered
[    0.400978] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[    0.401174] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[    0.401200] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.401479] pcieport 0000:00:1c.3: PME: Signaling with IRQ 26
[    0.401672] pcieport 0000:00:1c.5: PME: Signaling with IRQ 27
[    0.401751] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.401799] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    0.401801] vesafb: scrolling: redraw
[    0.401802] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.401819] vesafb: framebuffer at 0xe0000000, mapped to 0x00000000866dd1ba, using 4160k, total 4160k
[    0.401856] fbcon: Deferring console take-over
[    0.401857] fb0: VESA VGA frame buffer device
[    0.401870] intel_idle: MWAIT substates: 0x42120
[    0.401872] intel_idle: v0.5.1 model 0x3C
[    0.401954] intel_idle: Local APIC timer is reliable in all C-states
[    0.402501] ACPI: AC Adapter [ADP1] (off-line)
[    0.402570] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input0
[    0.402602] ACPI: Lid Switch [LID0]
[    0.402649] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.402666] ACPI: Power Button [PWRB]
[    0.402690] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.402704] ACPI: Sleep Button [SLPB]
[    0.402728] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.402751] ACPI: Power Button [PWRF]
[    0.404190] thermal LNXTHERM:00: registered as thermal_zone0
[    0.404193] ACPI: Thermal Zone [THRM] (58 C)
[    0.404380] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.406500] Linux agpgart interface v0.103
[    0.515958] battery: ACPI: Battery Slot [BAT1] (battery present)
[    0.531897] loop: module loaded
[    0.532338] libphy: Fixed MDIO Bus: probed
[    0.532340] tun: Universal TUN/TAP device driver, 1.6
[    0.532463] PPP generic driver version 2.4.2
[    0.532736] VFIO - User Level meta-driver version: 0.3
[    0.532824] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.532829] ehci-pci: EHCI PCI platform driver
[    0.532980] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.532987] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.532999] ehci-pci 0000:00:1a.0: debug port 2
[    0.536911] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000
[    0.551870] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.551930] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[    0.551933] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.551935] usb usb1: Product: EHCI Host Controller
[    0.551936] usb usb1: Manufacturer: Linux 5.11.0-44-generic ehci_hcd
[    0.551938] usb usb1: SerialNumber: 0000:00:1a.0
[    0.552139] hub 1-0:1.0: USB hub found
[    0.552145] hub 1-0:1.0: 2 ports detected
[    0.552457] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.552463] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.552473] ehci-pci 0000:00:1d.0: debug port 2
[    0.556381] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
[    0.571863] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.571925] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[    0.571928] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.571930] usb usb2: Product: EHCI Host Controller
[    0.571931] usb usb2: Manufacturer: Linux 5.11.0-44-generic ehci_hcd
[    0.571933] usb usb2: SerialNumber: 0000:00:1d.0
[    0.572131] hub 2-0:1.0: USB hub found
[    0.572138] hub 2-0:1.0: 2 ports detected
[    0.572316] ehci-platform: EHCI generic platform driver
[    0.572333] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.572337] ohci-pci: OHCI PCI platform driver
[    0.572346] ohci-platform: OHCI generic platform driver
[    0.572353] uhci_hcd: USB Universal Host Controller Interface driver
[    0.572399] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.592552] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.592556] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.592796] mousedev: PS/2 mouse device common for all mice
[    0.593459] rtc_cmos 00:02: RTC can wake from S4
[    0.593681] rtc_cmos 00:02: registered as rtc0
[    0.593729] rtc_cmos 00:02: setting system clock to 2022-01-08T20:00:35 UTC (1641672035)
[    0.593745] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.593752] i2c /dev entries driver
[    0.593793] device-mapper: uevent: version 1.0.3
[    0.593844] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    0.593863] platform eisa.0: Probing EISA bus 0
[    0.593866] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.593867] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.593868] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.593870] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.593871] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.593872] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.593873] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.593874] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.593876] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.593877] platform eisa.0: EISA: Detected 0 cards
[    0.593881] intel_pstate: Intel P-state driver initializing
[    0.594051] ledtrig-cpu: registered to indicate activity on CPUs
[    0.594134] drop_monitor: Initializing network drop monitor service
[    0.594282] NET: Registered protocol family 10
[    0.600381] Segment Routing with IPv6
[    0.600408] NET: Registered protocol family 17
[    0.600449] Key type dns_resolver registered
[    0.600637] microcode: sig=0x306c3, pf=0x10, revision=0x28
[    0.600663] microcode: Microcode Update Driver: v2.2.
[    0.600669] IPI shorthand broadcast: enabled
[    0.600678] sched_clock: Marking stable (600356654, 304080)->(602110794, -1450060)
[    0.600739] registered taskstats version 1
[    0.600750] Loading compiled-in X.509 certificates
[    0.601531] Loaded X.509 cert 'Build time autogenerated kernel key: b76b7bd860bcb68d1b2c86b1830a701ba6f88335'
[    0.602250] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.602962] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.602963] blacklist: Loading compiled-in revocation X.509 certificates
[    0.602981] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    0.603054] zswap: loaded using pool lzo/zbud
[    0.603155] Key type ._fscrypt registered
[    0.603156] Key type .fscrypt registered
[    0.603157] Key type fscrypt-provisioning registered
[    0.606140] Key type encrypted registered
[    0.606147] AppArmor: AppArmor sha1 policy hashing enabled
[    0.606154] ima: No TPM chip found, activating TPM-bypass!
[    0.606160] ima: Allocated hash algorithm: sha1
[    0.606166] ima: No architecture policies found
[    0.606177] evm: Initialising EVM extended attributes:
[    0.606178] evm: security.selinux
[    0.606179] evm: security.SMACK64
[    0.606180] evm: security.SMACK64EXEC
[    0.606181] evm: security.SMACK64TRANSMUTE
[    0.606181] evm: security.SMACK64MMAP
[    0.606182] evm: security.apparmor
[    0.606183] evm: security.ima
[    0.606183] evm: security.capability
[    0.606184] evm: HMAC attrs: 0x1
[    0.606814] PM:   Magic number: 6:652:42
[    0.606825] bdi 7:7: hash matches
[    0.606981] RAS: Correctable Errors collector initialized.
[    0.607950] Freeing unused decrypted memory: 2036K
[    0.608311] Freeing unused kernel image (initmem) memory: 2684K
[    0.615731] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.623859] Write protecting the kernel read-only data: 28672k
[    0.627781] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.628102] Freeing unused kernel image (rodata/data gap) memory: 1940K
[    0.689755] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.689757] x86/mm: Checking user space page tables
[    0.749370] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.749376] Run /init as init process
[    0.749377]   with arguments:
[    0.749378]     /init
[    0.749379]     splash
[    0.749380]   with environment:
[    0.749381]     HOME=/
[    0.749382]     TERM=linux
[    0.749383]     BOOT_IMAGE=/boot/vmlinuz-5.11.0-44-generic
[    0.807822] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.835835] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.903756] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20201113/utaddress-204)
[    0.903764] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.903775] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20201113/utaddress-204)
[    0.903780] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20201113/utaddress-204)
[    0.903787] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.907822] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20201113/utaddress-204)
[    0.907831] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20201113/utaddress-204)
[    0.907835] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR)
[    0.907835] ahci 0000:00:1f.2: version 3.0
[    0.907838]  (20201113/utaddress-204)
[    0.907841] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.907918] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20201113/utaddress-204)
[    0.907922] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20201113/utaddress-204)
[    0.907926] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20201113/utaddress-204)
[    0.907931] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.907933] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.908250] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    0.908271] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.913191] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.913200] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.914252] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.914440] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.914443] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.914446] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.915649] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[    0.915654] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.915655] usb usb3: Product: xHCI Host Controller
[    0.915657] usb usb3: Manufacturer: Linux 5.11.0-44-generic xhci-hcd
[    0.915659] usb usb3: SerialNumber: 0000:00:14.0
[    0.929953] hub 3-0:1.0: USB hub found
[    0.930754] hub 3-0:1.0: 14 ports detected
[    0.941306] i2c i2c-0: 2/4 memory slots populated (from DMI)
[    0.943796] i2c i2c-0: Successfully instantiated SPD at 0x50
[    0.946712] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d8:cb:8a:82:e9:d9]
[    0.946763] i2c i2c-0: Successfully instantiated SPD at 0x52
[    0.946984] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[    0.946987] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.946989] usb usb4: Product: xHCI Host Controller
[    0.946991] usb usb4: Manufacturer: Linux 5.11.0-44-generic xhci-hcd
[    0.946992] usb usb4: SerialNumber: 0000:00:14.0
[    0.947090] hub 4-0:1.0: USB hub found
[    0.947099] hub 4-0:1.0: 4 ports detected
[    0.966269] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
[    0.966275] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.968209] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[    0.968214] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.968363] hub 1-1:1.0: USB hub found
[    0.968458] hub 1-1:1.0: 6 ports detected
[    0.974208] alx 0000:03:00.0 enp3s0: renamed from eth0
[    0.980415] scsi host0: ahci
[    0.980537] scsi host1: ahci
[    0.980629] scsi host2: ahci
[    0.980717] scsi host3: ahci
[    0.980806] scsi host4: ahci
[    0.980850] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 29
[    0.980852] ata2: DUMMY
[    0.980854] ata3: DUMMY
[    0.980854] ata4: DUMMY
[    0.980857] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 29
[    0.992226] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[    0.992231] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.992850] hub 2-1:1.0: USB hub found
[    0.993658] hub 2-1:1.0: 8 ports detected
[    1.199897] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[    1.299412] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.299456] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.300170] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)

[    1.300212] No Local Variables are initialized for Method [_GTF]

[    1.300218] No Arguments are initialized for method [_GTF]

[    1.300227] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[    1.300534] ata5.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
[    1.300545] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.301355] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)

[    1.301396] No Local Variables are initialized for Method [_GTF]

[    1.301402] No Arguments are initialized for method [_GTF]

[    1.301411] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[    1.301721] ata5.00: configured for UDMA/133
[    1.303989] ata1.00: ATAPI: TSSTcorp CDDVDW SN-208FB, TM00, max UDMA/100
[    1.311313] ata1.00: configured for UDMA/100
[    1.322265] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208FB  TM00 PQ: 0 ANSI: 5
[    1.360574] usb 3-3: New USB device found, idVendor=0bda, idProduct=0138, bcdDevice=38.82
[    1.360587] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.360592] usb 3-3: Product: USB2.0-CRW
[    1.360596] usb 3-3: Manufacturer: Generic
[    1.360600] usb 3-3: SerialNumber: 20090516388200000
[    1.391295] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.391307] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.395899] tsc: Refined TSC clocksource calibration: 2394.454 MHz
[    1.395916] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c0783fd, max_idle_ns: 440795301468 ns
[    1.395967] clocksource: Switched to clocksource tsc
[    1.451997] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.452257] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.452749] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5
[    1.453033] scsi 4:0:0:0: Attached scsi generic sg1 type 0
[    1.453161] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.453165] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.453176] sd 4:0:0:0: [sda] Write Protect is off
[    1.453179] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.453197] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.495904] usb 3-7: new full-speed USB device number 3 using xhci_hcd
[    1.534006]  sda: sda1 sda2 sda3 < sda5 >
[    1.548189] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.645305] usb 3-7: New USB device found, idVendor=13d3, idProduct=3394, bcdDevice= 2.00
[    1.645312] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.645316] usb 3-7: Product: RT Bluetooth Radio
[    1.645318] usb 3-7: Manufacturer: Realtek
[    1.645320] usb 3-7: SerialNumber: 00e04c000001
[    1.654594] usbcore: registered new interface driver usb-storage
[    1.657224] usbcore: registered new interface driver uas
[    1.659237] ums-realtek 3-3:1.0: USB Mass Storage device detected
[    1.662676] scsi host5: usb-storage 3-3:1.0
[    1.662748] usbcore: registered new interface driver ums-realtek
[    1.955164] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x550f00)
[    1.978634] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x15, 0x0c.
[    2.002312] psmouse serio1: elantech: Elan sample query result 00, 5a, 96
[    2.120328] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[    2.184983] fbcon: Taking over console
[    2.185053] Console: switching to colour frame buffer device 170x48
[    2.678969] scsi 5:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    2.679980] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    2.721281] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[    3.795100] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    5.840926] systemd[1]: Inserted module 'autofs4'
[    6.146294] systemd[1]: systemd 245.4-4ubuntu3.14 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    6.164077] systemd[1]: Detected architecture x86-64.
[    6.203371] systemd[1]: Set hostname to <pierre-CR61-2M-CX61-2OC-CX61-2OD>.
[   10.000397] systemd[1]: Created slice system-modprobe.slice.
[   10.001117] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   10.001751] systemd[1]: Created slice User and Session Slice.
[   10.001950] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.002456] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.002589] systemd[1]: Reached target User and Group Name Lookups.
[   10.002636] systemd[1]: Reached target Remote File Systems.
[   10.002665] systemd[1]: Reached target Slices.
[   10.003021] systemd[1]: Listening on Syslog Socket.
[   10.003285] systemd[1]: Listening on fsck to fsckd communication Socket.
[   10.003436] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   10.004013] systemd[1]: Listening on Journal Audit Socket.
[   10.004268] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.004571] systemd[1]: Listening on Journal Socket.
[   10.004858] systemd[1]: Listening on udev Control Socket.
[   10.005064] systemd[1]: Listening on udev Kernel Socket.
[   10.007611] systemd[1]: Mounting Huge Pages File System...
[   10.009145] systemd[1]: Mounting POSIX Message Queue File System...
[   10.010540] systemd[1]: Mounting Kernel Debug File System...
[   10.011595] systemd[1]: Mounting Kernel Trace File System...
[   10.013079] systemd[1]: Starting Journal Service...
[   10.014165] systemd[1]: Starting Set the console keyboard layout...
[   10.015345] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   10.016399] systemd[1]: Starting Load Kernel Module drm...
[   10.077511] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   10.077558] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   10.179905] systemd[1]: Starting Load Kernel Modules...
[   10.181055] systemd[1]: Starting Remount Root and Kernel File Systems...
[   10.182172] systemd[1]: Starting udev Coldplug all Devices...
[   10.183127] systemd[1]: Starting Uncomplicated firewall...
[   10.184804] systemd[1]: Mounted Huge Pages File System.
[   10.184931] systemd[1]: Mounted POSIX Message Queue File System.
[   10.185042] systemd[1]: Mounted Kernel Debug File System.
[   10.185146] systemd[1]: Mounted Kernel Trace File System.
[   10.185596] systemd[1]: Finished Create list of static device nodes for the current kernel.
[   10.320188] systemd[1]: modprobe@drm.service: Succeeded.
[   10.320766] systemd[1]: Finished Load Kernel Module drm.
[   10.403992] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[   10.405572] systemd[1]: Finished Remount Root and Kernel File Systems.
[   10.406467] systemd[1]: Activating swap /swapfile...
[   10.492036] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   10.492104] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[   10.492998] systemd[1]: Starting Load/Save Random Seed...
[   10.494125] systemd[1]: Starting Create System Users...
[   10.494855] systemd[1]: Finished Uncomplicated firewall.
[   10.702825] lp: driver loaded but no devices found
[   10.770375] systemd[1]: Finished Set the console keyboard layout.
[   10.852529] ppdev: user-space parallel port driver
[   10.929518] systemd[1]: Started Journal Service.
[   11.166309] systemd-journald[248]: Received client request to flush runtime journal.
[   11.355855] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k FS
[   11.826321] systemd-journald[248]: File /var/log/journal/4e91af8984bc46f1b6f3a112acf0afc2/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   12.981877] loop0: detected capacity change from 0 to 8
[   13.000021] loop1: detected capacity change from 0 to 112528
[   13.032180] loop2: detected capacity change from 0 to 113640
[   13.064051] loop3: detected capacity change from 0 to 126784
[   13.080515] loop4: detected capacity change from 0 to 493152
[   13.096195] loop5: detected capacity change from 0 to 448512
[   13.127636] loop6: detected capacity change from 0 to 507712
[   13.387441] loop7: detected capacity change from 0 to 127160
[   13.456077] loop8: detected capacity change from 0 to 133552
[   13.552178] loop9: detected capacity change from 0 to 101960
[   13.628043] loop10: detected capacity change from 0 to 111080
[   13.676019] loop11: detected capacity change from 0 to 88616
[   13.776059] loop12: detected capacity change from 0 to 55480
[   14.992220] EDAC ie31200: No ECC support
[   14.992253] EDAC ie31200: No ECC support
[   15.425095] at24 0-0050: supply vcc not found, using dummy regulator
[   15.427627] at24 0-0050: 256 byte spd EEPROM, read-only
[   15.427661] at24 0-0052: supply vcc not found, using dummy regulator
[   15.428206] at24 0-0052: 256 byte spd EEPROM, read-only
[   15.638226] Bluetooth: Core ver 2.22
[   15.638253] NET: Registered protocol family 31
[   15.638254] Bluetooth: HCI device and connection manager initialized
[   15.638259] Bluetooth: HCI socket layer initialized
[   15.638261] Bluetooth: L2CAP socket layer initialized
[   15.638264] Bluetooth: SCO socket layer initialized
[   15.753702] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   15.753706] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   15.753707] RAPL PMU: hw unit of domain package 2^-14 Joules
[   15.753708] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   15.753709] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   15.801790] usbcore: registered new interface driver btusb
[   15.803947] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200
[   15.803953] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723a_fw.bin
[   15.869791] input: MSI WMI hotkeys as /devices/virtual/input/input7
[   15.903116] cryptd: max_cpu_qlen set to 1000
[   16.200832] checking generic (e0000000 410000) vs hw (f7800000 400000)
[   16.200837] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[   16.200838] fb0: switching to inteldrmfb from VESA VGA
[   16.201837] Console: switching to colour dummy device 80x25
[   16.201881] i915 0000:00:02.0: vgaarb: deactivate vga console
[   16.205177] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   16.227372] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[   16.231341] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   16.232335] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[   16.237477] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   16.237812] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   16.255882] fbcon: i915drmfb (fb0) is primary device
[   16.255939] Console: switching to colour frame buffer device 170x48
[   16.255957] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[   16.717105] Bluetooth: hci0: RTL: fw version 0x0e3da5b1
[   18.196927] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[   18.202020] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   18.203754] rtlwifi: rtlwifi: wireless switch is on
[   18.369260] rtl8723ae 0000:04:00.0 wlp4s0: renamed from wlan0
[   18.552774] intel_rapl_common: Found RAPL domain package
[   18.552782] intel_rapl_common: Found RAPL domain core
[   18.552785] intel_rapl_common: Found RAPL domain uncore
[   18.552788] intel_rapl_common: Found RAPL domain dram
[   18.552798] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[   18.552813] intel_rapl_common: RAPL package-0 domain dram locked by BIOS
[   19.314023] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   19.409675] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[   19.409786] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[   19.409880] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[   19.409972] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[   19.410059] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[   19.746803] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   19.746819] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.746826] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   19.746832] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   19.746836] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   19.746839] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x19
[   19.746845] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
[   19.761218] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[   19.761349] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[   30.179961] audit: type=1400 audit(1641672065.082:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=665 comm="apparmor_parser"
[   30.319037] audit: type=1400 audit(1641672065.218:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=671 comm="apparmor_parser"
[   30.373281] audit: type=1400 audit(1641672065.274:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=666 comm="apparmor_parser"
[   30.373287] audit: type=1400 audit(1641672065.274:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=666 comm="apparmor_parser"
[   30.373290] audit: type=1400 audit(1641672065.274:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=666 comm="apparmor_parser"
[   30.373292] audit: type=1400 audit(1641672065.274:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=666 comm="apparmor_parser"
[   30.498771] audit: type=1400 audit(1641672065.398:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=672 comm="apparmor_parser"
[   30.498787] audit: type=1400 audit(1641672065.398:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=672 comm="apparmor_parser"
[   30.498795] audit: type=1400 audit(1641672065.398:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=672 comm="apparmor_parser"
[   30.595324] audit: type=1400 audit(1641672065.494:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=673 comm="apparmor_parser"
[   38.865339] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   38.865343] Bluetooth: BNEP filters: protocol multicast
[   38.865347] Bluetooth: BNEP socket layer initialized
[   39.154691] NET: Registered protocol family 38
[   40.944518] kauditd_printk_skb: 27 callbacks suppressed
[   40.944521] audit: type=1400 audit(1641672075.846:39): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=825 comm="cups-browsed" capability=23  capname="sys_nice"
[   45.139991] loop13: detected capacity change from 0 to 8
[   46.699538] wlp4s0: authenticate with 72:ee:2e:36:4e:60
[   46.710164] wlp4s0: send auth to 72:ee:2e:36:4e:60 (try 1/3)
[   46.720527] wlp4s0: authenticated
[   46.723907] wlp4s0: associate with 72:ee:2e:36:4e:60 (try 1/3)
[   46.736486] wlp4s0: RX AssocResp from 72:ee:2e:36:4e:60 (capab=0x411 status=0 aid=2)
[   46.736657] wlp4s0: associated
[   52.960657] wlp4s0: deauthenticated from 72:ee:2e:36:4e:60 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[   54.069156] wlp4s0: authenticate with 72:ee:2e:36:4e:60
[   54.089785] wlp4s0: send auth to 72:ee:2e:36:4e:60 (try 1/3)
[   54.092782] wlp4s0: authenticated
[   54.095942] wlp4s0: associate with 72:ee:2e:36:4e:60 (try 1/3)
[   54.107336] wlp4s0: RX AssocResp from 72:ee:2e:36:4e:60 (capab=0x411 status=0 aid=2)
[   54.107579] wlp4s0: associated
[   58.355556] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   75.310026] rfkill: input handler disabled
[  125.906333] rfkill: input handler enabled
[  125.929824] Bluetooth: RFCOMM TTY layer initialized
[  125.929862] Bluetooth: RFCOMM socket layer initialized
[  125.929867] Bluetooth: RFCOMM ver 1.11
[  136.426078] rfkill: input handler disabled
[  138.102109] audit: type=1400 audit(1641672173.928:40): apparmor="DENIED" operation="capable" profile="/snap/snapd/14295/usr/lib/snapd/snap-confine" pid=1883 comm="snap-confine" capability=4  capname="fsetid"
[  145.503461] audit: type=1326 audit(1641672181.332:41): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=1883 comm="snap-store" exe="/snap/snap-store/558/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f433daff89d code=0x50000
[  148.236833] audit: type=1107 audit(1641672184.064:42): pid=710 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.9" pid=1883 label="snap.snap-store.ubuntu-software" peer_pid=722 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[  148.237200] audit: type=1107 audit(1641672184.064:43): pid=710 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.9" pid=1883 label="snap.snap-store.ubuntu-software" peer_pid=722 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[  148.526507] audit: type=1107 audit(1641672184.356:44): pid=710 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.9" pid=1883 label="snap.snap-store.ubuntu-software" peer_pid=722 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[  148.527547] audit: type=1107 audit(1641672184.356:45): pid=710 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.9" pid=1883 label="snap.snap-store.ubuntu-software" peer_pid=722 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[  149.421123] audit: type=1400 audit(1641672185.248:46): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=1883 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$

Nuliel · Le 08/01/2022, à 21:29

Tristesse, il y a pas la moindre piste dans tout ça
On est d'accord que tu peux voir d'autres objets avec du bluetooth? Si non, on peut regarder côté paramètres au pilote wifi/bluetooth

arzavapi · Le 08/01/2022, à 23:03

Merci Nuliel

Oui je vois "d'autres objets". Notamment notre box wi-fi... et d'autres appareils qui font probablement partie du voisinage.

Je ne vois même pas le casque Bose Quet Confort 45 (plus récent) de ma compagne apparaître...

Cet ordi est fâché avec les casques Bose -et dire que ça marchait très bien il y a encore une semaine après 3 mois d'écoute.

Ca ressemble étrangement à une autre discussion que j'ai déjà eue... https://forum.ubuntu-fr.org/viewtopic.php?id=1993807

Dernière modification par arzavapi (Le 09/01/2022, à 00:06)

Nuliel · Le 09/01/2022, à 10:25

Alors les specs de ce casque sont pas claires (voire inexistantes), mais il semblerait que ce soit du Bluetooth 4.1 qui soit utilisé, donc peut être que du BLE est utilisé.
Tu peux essayer de faire "Reactivate Bluetooth LE (optional)" de https://askubuntu.com/questions/833322/ … -bluetooth (en d'autres termes l'inverse de ce que tu as fait au #18/#19, afin de réactiver le BLE)

Dernière modification par Nuliel (Le 09/01/2022, à 10:25)

arzavapi · Le 09/01/2022, à 13:04

Bonjour Nuliel

Je viens juste de faire l'opération de ce matin. Et après un redémarrage ça n'a rien changé...

J'ai juste réussi à connecter le bluetooth de mon téléphone. J'ai tenté de faire un partage de connexion bluetooth avec mon télépone à partir de l'application Bose Connect. Ca n'a pas marché

Dernière modification par arzavapi (Le 09/01/2022, à 13:15)

xubu1957 · Le 09/01/2022, à 13:13

Bonjour,

@Nuliel

Rien à récupérer du fil de wallace27 ?

arzavapi · Le 09/01/2022, à 14:07

Bonjour Xubu1957 et re-bonjour Nuliel

J'ai donc appliqué la méthode https://forum.ubuntu-fr.org/viewtopic.p … #p22026787 du fil de Wallace...

Je ne crois pas avoir vraiment compris et réussi à appliquer les points 3.2 et 2bis :

- sélectionner: A2DP Sink (lecture audio haute fidélité) ???
- 2.bis pulseaudio :  Maintenant il faut envoyer le son lu (par une application) vers le casque (au lieu des haut parleur par exemple)

"Pour cela  lancer pavucontrol ("pavucontrol" en ligne de commande ou bien sous Lxde: icone "haut-parleur", clique droit, "Paramètres Contrôle Volume")
dans l'onglet "Périphériques de sortie" vérifier l'existence du casque.
enfin flécher les entrées (Onglet Lecture) vers cette sortie"....

Mais j'ai pu appaîrer mon Casque Bluetooth Bose Quietcomfort 35 non pas avec le petit applet bleu que j'ai dans le coin à droite de mon écran mais avec le Bluetooth qu'on voit en cliquant sur le petit triangle inversé à droite de l'écran.

J'ai bien sûr respecté la procédure de faire la connexion en "Headset" avec le Bluetooth...

Et victoire ça marche !!!!

Pour les points que je n'ai pas compris -ci dessus- pouvez vous me donner une explication plus claire s'il vous plaît ?

Je reviendrai dans la journée passer le sujet en "résolu"....

En tous cas vraiment merci beaucoup !!!!

Dernière modification par arzavapi (Le 09/01/2022, à 14:11)

Nuliel · Le 09/01/2022, à 19:36

A2DP c'est un module qui va transmettre le son je crois. En fait tu commences par appairer l'appareil, ensuite tu indiques à ton ordi la fonction (A2DP pour transmettre du son, mais ça peut être d'autres choses), et ensuite tu peux utiliser ton matos.

2.bis: pulseaudio permet de choisir à quel endroit envoyer le son: hauts parleurs, écouteurs, casque bluetooth (via un module à pulseaudio). C'est ici

arzavapi · Le 12/01/2022, à 12:32

Merci Nuliel !!!

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#26 Le 08/01/2022, à 12:28

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#27 Le 08/01/2022, à 14:20

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#28 Le 08/01/2022, à 17:04

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#29 Le 08/01/2022, à 17:48

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#30 Le 08/01/2022, à 17:58

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#31 Le 08/01/2022, à 18:03

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#32 Le 08/01/2022, à 18:48

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#33 Le 08/01/2022, à 18:49

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#34 Le 08/01/2022, à 19:24

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#35 Le 08/01/2022, à 20:15

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#36 Le 08/01/2022, à 21:13

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#37 Le 08/01/2022, à 21:29

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#38 Le 08/01/2022, à 23:03

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#39 Le 09/01/2022, à 10:25

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#40 Le 09/01/2022, à 13:04

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#41 Le 09/01/2022, à 13:13

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#42 Le 09/01/2022, à 14:07

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#43 Le 09/01/2022, à 19:36

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

#44 Le 12/01/2022, à 12:32

Re : Problème appairage Bose QuietComfort 35 Bluetooth Ubuntu 20.04【Résolu】

Pied de page des forums