#1 Le 18/01/2022, à 20:09
- iznobe
ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Bonjour , j' ai remarqué que j ' ai des erreurs qui apparaissent sur mes disques ( ? ) apres retour de mise en veille uniquement ( enfin , je crois ) .
j ' ai cherché un peu partout sur le net , mais pas trouvé grand chose de concluant , pourtant des posts avec cette erreur , il y en tout un tas ...
Du coup je ne sais pas trop comment m ' y prendre pour tenter de resoudre ce soucis .
Si vous avez des idées , je suis preneur .
voici l ' erreur en question :
iznobe@iznobe-PC:~$ sudo dmesg | grep COMRESET
[ 4095.981718] ata1: COMRESET failed (errno=-16)
[ 4095.985719] ata2: COMRESET failed (errno=-16)
[57838.557511] ata2: COMRESET failed (errno=-16)
[57838.561503] ata1: COMRESET failed (errno=-16)
[61023.426439] ata2: COMRESET failed (errno=-16)
[61023.498445] ata1: COMRESET failed (errno=-16)
iznobe@iznobe-PC:~$Mon boot-info :
boot-info-4ppa161 [20220118_2007]
============================== Boot Info Summary ===============================
=> No boot loader is installed in the MBR of /dev/nvme0n1.
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
=> No boot loader is installed in the MBR of /dev/sdc.
=> Grub2 (v1.99-2.00) is installed in the MBR of /dev/sdd and looks at sector
2048 of the same hard drive for core.img, but core.img can not be found at
this location.
nvme0n1p1: _____________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 10 or 11
Boot files: /bootmgr /Windows/System32/winload.exe
nvme0n1p2: _____________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
nvme0n1p3: _____________________________________________________________________
File system: vfat
Boot sector type: Windows 8/10/11/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/Boot/fbx64.efi /efi/Boot/grubx64.efi
/efi/Boot/mmx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi
/efi/ubuntu/grub.cfg /efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
/efi/Microsoft/Boot/grubx64.efi
nvme0n1p4: _____________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
nvme0n1p5: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 20.3
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/refind_linux.conf
nvme0n1p6: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.6 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/refind_linux.conf
nvme0n1p7: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 21.10
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Unknown
Boot sector info: According to the info in the boot sector, sda2 starts
at sector 0. But according to the info from fdisk,
sda2 starts at sector 7404435456.
Operating System:
Boot files:
sda3: __________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 21.04
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Debian GNU/Linux 11 (bullseye)
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc4: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdd1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
================================ 6 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 21.10 CurrentSession on nvme0n1p7
OS#2: Linux Mint 20.3 Una (20.3) on nvme0n1p5
OS#3: Ubuntu 18.04.6 LTS on nvme0n1p6
OS#4: Ubuntu 21.04 on sda3
OS#5: Debian GNU/Linux 11 (bullseye) on sda4
OS#6: Windows 10 or 11 on nvme0n1p1
================================ Host/Hardware =================================
CPU architecture: 64-bit
Video: CometLake-SGT2[UHDGraphics630] from Intel Corporation
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.13.0-25-generic root=UUID=8ab22881-60b3-47aa-a0bf-54c292afae81 ro quiet splash
df -Th / : /dev/nvme0n1p7 ext4 49G 15G 32G 33% /
===================================== UEFI =====================================
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled.
efibootmgr -v
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0002,0000
Boot0000* Windows Boot Manager HD(3,GPT,fa603a69-ea88-11ea-84d7-2cf05d2920f2,0x3a247800,0x32000)/File(\EFI\MICROSOFT\BOOT\BOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0002* ubuntu HD(3,GPT,fa603a69-ea88-11ea-84d7-2cf05d2920f2,0x3a247800,0x32000)/File(\EFI\UBUNTU\SHIMX64.EFI)..BO
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
nvme0n1 : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, has-win, 2048 sectors * 512 bytes
sdd : is-GPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, no-wind, 2048 sectors * 512 bytes
sdb : is-GPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, no-wind, 2048 sectors * 512 bytes
sda : is-GPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, no-wind, 2048 sectors * 512 bytes
sdc : is-GPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, no-wind, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
nvme0n1p7 : is-os, 64, apt-get, signed grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
nvme0n1p1 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme0n1p2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme0n1p3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme0n1p4 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme0n1p5 : is-os, 64, apt-get, signed grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
nvme0n1p6 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
sdd1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdb1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdb2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda3 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
sda4 : is-os, 64, apt-get, signed grub-efi , grub2, grub-install, no-grubenv, update-grub, farbios
sda5 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdc3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
Partitions info (2/3): _________________________________________________________
nvme0n1p7 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p1 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, notwinboot
nvme0n1p2 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
nvme0n1p3 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p4 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
nvme0n1p5 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p6 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdd1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda3 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda4 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda5 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc3 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
nvme0n1p7 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, nvme0n1
nvme0n1p1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, nvme0n1
nvme0n1p2 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, nvme0n1
nvme0n1p3 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, nvme0n1
nvme0n1p4 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, nvme0n1
nvme0n1p5 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, nvme0n1
nvme0n1p6 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, nvme0n1
sdd1 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdd
sdb1 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
sdb2 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
sda1 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda2 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda3 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda4 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda5 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sdc3 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdc
fdisk -l (filtered): ___________________________________________________________
Disk nvme0n1: 476.94 GiB, 512110190592 bytes, 1000215216 sectors
Disk identifier: FA603A6B-EA88-11EA-84D7-2CF05D2920F2
Start End Sectors Size Type
nvme0n1p1 2048 262146047 262144000 125G Microsoft basic data
nvme0n1p2 974163968 975468543 1304576 637M Windows recovery environment
nvme0n1p3 975468544 975673343 204800 100M EFI System
nvme0n1p4 975673344 976769023 1095680 535M Windows recovery environment
nvme0n1p5 262146048 326146047 64000000 30.5G Linux filesystem
nvme0n1p6 387059712 490741759 103682048 49.4G Linux filesystem
nvme0n1p7 490741760 594194884 103453125 49.3G Linux filesystem
Partition table entries are not in disk order.
Disk sdd: 465.76 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 4B69907E-B42D-4A13-B15B-000372E51DF7
Start End Sectors Size Type
sdd1 2048 976773119 976771072 465.8G Linux filesystem
Disk sdb: 7.28 TiB, 8001563222016 bytes, 15628053168 sectors
Disk identifier: 17F22EFB-F01F-47E2-8BE1-2C777695A6DA
Start End Sectors Size Type
sdb1 2048 14536943615 14536941568 6.8T Linux filesystem
sdb2 14536943616 15628052479 1091108864 520.3G Linux filesystem
Disk sda: 3.64 TiB, 4000787030016 bytes, 7814037168 sectors
Disk identifier: 4297D0DC-C19E-4B15-995D-B37E6F591044
Start End Sectors Size Type
sda1 2048 7292897279 7292895232 3.4T Linux filesystem
sda2 7404435456 7814035455 409600000 195.3G Microsoft basic data
sda3 7374817280 7404435455 29618176 14.1G Linux filesystem
sda4 7333857280 7374817279 40960000 19.5G Linux filesystem
sda5 7292897280 7333857279 40960000 19.5G Linux filesystem
Partition table entries are not in disk order.
Disk sdc: 2.73 TiB, 3000592982016 bytes, 5860533168 sectors
Disk identifier: 8A59F3F8-FA05-4E27-8CDF-FECBD6FDEFBC
Start End Sectors Size Type
sdc3 2048 5793423359 5793421312 2.7T Linux filesystem
sdc4 5793423360 5860532223 67108864 32G Linux swap
parted -lm (filtered): _________________________________________________________
sda:4001GB:scsi:512:4096:gpt:ATA ST4000VX000-2AG1:;
1:1049kB:3734GB:3734GB:ext4:Seagate_4T:;
5:3734GB:3755GB:21.0GB:ext4:Android_8.1:;
4:3755GB:3776GB:21.0GB:ext4:Debian_bullseye:;
3:3776GB:3791GB:15.2GB:ext3:ubuntu_secours:;
2:3791GB:4001GB:210GB:ntfs:Win_Part:msftdata;
sdb:8002GB:scsi:512:4096:gpt:ATA WDC WD82PURZ-85T:;
1:1049kB:7443GB:7443GB:ext4:Western_8T:;
2:7443GB:8002GB:559GB:ext4:SAUV:;
sdc:3001GB:scsi:512:4096:gpt:ATA TOSHIBA HDWD130:;
3:1049kB:2966GB:2966GB:ext4:datas:;
4:2966GB:3001GB:34.4GB:linux-swap(v1):swap:swap;
sdd:500GB:scsi:512:512:gpt:ATA ST3500320AS:;
1:1049kB:500GB:500GB:ext4:Sauvegardes:;
nvme0n1:512GB:nvme:512:512:gpt:ADATA SX8200PNP:;
1:1049kB:134GB:134GB:ntfs::msftdata;
5:134GB:167GB:32.8GB:ext4:LM_SSD:;
6:198GB:251GB:53.1GB:ext4:ubuntu_SSD:;
7:251GB:304GB:53.0GB:ext4:budgie_SSD:;
2:499GB:499GB:668MB:ntfs::hidden, diag;
3:499GB:500GB:105MB:fat32:SSD_EFI_WIN:boot, esp;
4:500GB:500GB:561MB:ntfs::hidden, diag;
Free space (filtered): _________________________________________________________
nvme0n1:488386MiB:nvme:512:512:gpt:ADATA SX8200PNP:;
1:0.02MiB:1.00MiB:0.98MiB:free;
1:159251MiB:188994MiB:29743MiB:free;
1:290134MiB:475666MiB:185532MiB:free;
1:476938MiB:488386MiB:11448MiB:free;
sda:3815448MiB:scsi:512:4096:gpt:ATA ST4000VX000-2AG1:;
1:0.02MiB:1.00MiB:0.98MiB:free;
1:3815447MiB:3815448MiB:0.82MiB:free;
sdb:7630885MiB:scsi:512:4096:gpt:ATA WDC WD82PURZ-85T:;
1:0.02MiB:1.00MiB:0.98MiB:free;
1:7630885MiB:7630885MiB:0.32MiB:free;
sdc:2861588MiB:scsi:512:4096:gpt:ATA TOSHIBA HDWD130:;
1:0.02MiB:1.00MiB:0.98MiB:free;
1:2861588MiB:2861588MiB:0.44MiB:free;
sdd:476940MiB:scsi:512:512:gpt:ATA ST3500320AS:;
1:0.02MiB:1.00MiB:0.98MiB:free;
1:476940MiB:476940MiB:0.01MiB:free;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 ext4 4f8cc284-cd84-4eeb-b412-7539f81664c4 c94312f1-6589-402a-b882-1eda4c91df2e Seagate_4T Seagate_4T
├─sda2 ntfs 63A32BC117F67B6A f6dca099-c6e1-4ce6-8519-0e4b12ddca34 Win_Part Win_Part
├─sda3 ext3 89f71135-b459-4c74-bfa3-e9d27df4369d b62488ce-c26b-4773-b94a-de39b4bf003e ubuntu_secours ubuntu_secours
├─sda4 ext4 eb4da8d1-c3ea-4788-9692-e9e23690066e da5d988e-3ec1-ae46-8468-c682b12a4483 Debian_bullseye Debian_bullseye
└─sda5 ext4 45eb6a28-099b-4380-82b1-3116e53ef83a 8acbcb61-8de5-4a10-9ec0-1de1aa3925f8 Android_8.1 Android_8.1
sdb
├─sdb1 ext4 1db8a5b3-ff12-4d31-9463-b188ffefe43b 57905315-bfff-4ae2-a429-16b27cd0c835 Western_8T Western_8T
└─sdb2 ext4 d9dc9f4e-a24a-4573-9465-13711480f272 6701d1a9-a4de-4c6e-8412-bb8855d6eac4 SAUV SAUV
sdc
├─sdc3 ext4 01c9b796-0869-4ff9-a2a1-6c0f56ed5257 89e4c720-e762-466d-ab35-c51053c280ec datas datas
└─sdc4 swap 61218fe2-0bd1-4ada-9dd3-5ec996a02456 b31b4fb7-6df7-44d5-80c0-3df3eb1b4515 swap
sdd
└─sdd1 ext4 8fa551b3-2c21-46cd-982f-7e5c42fea7cc b0f96305-a0dc-4eda-949b-38f3f1b90cab Sauvegardes Sauvegardes
nvme0n1
├─nvme0n1p1 ntfs 08CCB0D8CCB0C0EC fa603a68-ea88-11ea-84d7-2cf05d2920f2 windows_10
├─nvme0n1p2 ntfs E49A115A9A112B16 b9d0bee1-8f59-4939-aa3d-4fbb7a2826d0
├─nvme0n1p3 vfat C071-9050 fa603a69-ea88-11ea-84d7-2cf05d2920f2 SSD_EFI_WIN SSD_EFI_WIN
├─nvme0n1p4 ntfs 0E52DDB352DD9FAF fa603a6a-ea88-11ea-84d7-2cf05d2920f2
├─nvme0n1p5 ext4 eb18366b-2ac9-4a7e-8f93-ba2caa30e90e baccdf86-c41b-4282-b346-2bf4044ba210 LM_SSD LM_SSD
├─nvme0n1p6 ext4 06bc0f51-50e8-4ed4-8090-903acdb7df3f a3395bb8-cd3a-42d4-a1db-80f5f5046502 ubuntu_SSD ubuntu_SSD
└─nvme0n1p7 ext4 8ab22881-60b3-47aa-a0bf-54c292afae81 42815f7b-2084-469f-b4a8-ae91352d0f5b budgie_SSD budgie_SSD
df (filtered): _________________________________________________________________
Avail Use% Mounted on
nvme0n1p1 65.6G 48% /mnt/boot-sav/nvme0n1p1
nvme0n1p2 46.6M 93% /mnt/boot-sav/nvme0n1p2
nvme0n1p4 525M 2% /mnt/boot-sav/nvme0n1p4
nvme0n1p5 9.7G 62% /mnt/boot-sav/nvme0n1p5
nvme0n1p6 39.7G 13% /mnt/boot-sav/nvme0n1p6
nvme0n1p7 31.2G 30% /
sda1 1.8T 45% /mnt/boot-sav/sda1
sda2 195.2G 0% /mnt/boot-sav/sda2
sda3 6.9G 45% /mnt/boot-sav/sda3
sda4 7.8G 54% /mnt/boot-sav/sda4
sda5 18.1G 0% /mnt/boot-sav/sda5
sdb1 1.7T 75% /Vidxc3xa9os
sdb2 80.8G 84% /mnt/boot-sav/sdb2
sdc3 2T 23% /datas
sdd1 28G 94% /mnt/boot-sav/sdd1
Mount options: __________________________________________________________________
nvme0n1p1 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
nvme0n1p2 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
nvme0n1p4 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
nvme0n1p5 rw,relatime
nvme0n1p6 rw,relatime
nvme0n1p7 rw,noatime,errors=remount-ro
sda1 rw,relatime,stripe=32752
sda2 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda3 rw,relatime
sda4 rw,relatime
sda5 rw,relatime
sdb1 rw,noatime
sdb2 rw,relatime
sdc3 rw,relatime
sdd1 rw,relatime
=================== nvme0n1p3/efi/ubuntu/grub.cfg (filtered) ===================
search.fs_uuid 8ab22881-60b3-47aa-a0bf-54c292afae81 root
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
=================== nvme0n1p5/boot/grub/grub.cfg (filtered) ====================
Linux Mint 20.3 Cinnamon eb18366b-2ac9-4a7e-8f93-ba2caa30e90e
Linux Mint 20.3 Cinnamon, avec Linux 5.11.0-46-generic eb18366b-2ac9-4a7e-8f93-ba2caa30e90e
Linux Mint 20.3 Cinnamon, avec Linux 5.11.0-44-generic eb18366b-2ac9-4a7e-8f93-ba2caa30e90e
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
Ubuntu Budgie 21.04 Ubuntu 21
Debian GNU/Linux debian
Ubuntu 18.04.6 LTS Ubuntu 18
Ubuntu 21.04 Ubuntu 21
Windows
======================== nvme0n1p5/etc/fstab (filtered) ========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/nvme0n1p2 during installation
UUID=eb18366b-2ac9-4a7e-8f93-ba2caa30e90e / ext4 noatime,errors=remount-ro 0 1
# /boot/efi was on /dev/nvme0n1p1 during installation
UUID=C071-9050 /boot/efi vfat defaults 0 1
# swap was on /dev/sdc3 during installation
UUID=61218fe2-0bd1-4ada-9dd3-5ec996a02456 none swap sw 0 0
UUID=01c9b796-0869-4ff9-a2a1-6c0f56ed5257 /datas ext4 defaults 0 0
/dev/disk/by-label/Western_8T /Vidéos ext4 defaults 0 0
tmpfs /tmp tmpfs defaults,noatime 0 0
tmpfs /media/ramdisk tmpfs rw,noatime,size=28G 0 0
==================== nvme0n1p5/etc/default/grub (filtered) =====================
GRUB_DEFAULT=0
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=true
================= nvme0n1p5/boot/refind_linux.conf (filtered) ==================
"Boot with standard options" "root=UUID=eb18366b-2ac9-4a7e-8f93-ba2caa30e90e ro"
"Boot to single-user mode" "root=UUID=eb18366b-2ac9-4a7e-8f93-ba2caa30e90e ro single"
"Boot with minimal options" "ro root=/dev/nvme0n1p5"
================= nvme0n1p5: Location of files loaded by Grub ==================
GiB - GB File Fragment(s)
146.517238617 = 157.321687040 boot/grub/grub.cfg 1
134.722850800 = 144.657559552 boot/vmlinuz 2
145.910350800 = 156.670046208 boot/vmlinuz-5.11.0-44-generic 2
134.722850800 = 144.657559552 boot/vmlinuz-5.11.0-46-generic 2
145.910350800 = 156.670046208 boot/vmlinuz.old 2
142.638092041 = 153.156485120 boot/initrd.img 10
140.570693970 = 150.936633344 boot/initrd.img-5.11.0-44-generic 8
142.638092041 = 153.156485120 boot/initrd.img-5.11.0-46-generic 10
140.570693970 = 150.936633344 boot/initrd.img.old 8
=================== nvme0n1p5: ls -l /etc/grub.d/ (filtered) ===================
-rwxr-xr-x 1 root root 18151 août 12 11:18 10_linux
-rwxr-xr-x 1 root root 42359 août 12 11:18 10_linux_zfs
-rwxr-xr-x 1 root root 12894 août 12 11:18 20_linux_xen
-rwxr-xr-x 1 root root 12059 août 12 11:18 30_os-prober
-rwxr-xr-x 1 root root 1424 août 12 11:18 30_uefi-firmware
-rwxr-xr-x 1 root root 1588 janv. 4 19:10 40_custom
-rwxr-xr-x 1 root root 216 août 12 11:18 41_custom
======================== nvme0n1p5/etc/grub.d/40_custom ========================
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry 'Ubuntu Budgie 21.04' --class ubuntu --class gnu-linux --class gnu --class os --id 'Ubuntu 21' {
insmod part_gpt
insmod part_msdos
insmod ext2
search --no-floppy --fs-uuid --set=root 8ab22881-60b3-47aa-a0bf-54c292afae81
configfile /boot/grub/grub.cfg
}
menuentry 'Debian GNU/Linux' --class gnu-linux --class gnu --class os --id 'debian' {
insmod part_gpt
insmod part_msdos
insmod ext2
search --no-floppy --fs-uuid --set=root eb4da8d1-c3ea-4788-9692-e9e23690066e
configfile /boot/grub/grub.cfg
}
menuentry 'Ubuntu 18.04.6 LTS' --class ubuntu --class gnu-linux --class gnu --class os --id 'Ubuntu 18' {
insmod part_gpt
insmod part_msdos
insmod ext2
search --no-floppy --fs-uuid --set=root 06bc0f51-50e8-4ed4-8090-903acdb7df3f
configfile /boot/grub/grub.cfg
}
menuentry 'Ubuntu 21.04' --class ubuntu --class gnu-linux --class gnu --class os --id 'Ubuntu 21' {
insmod part_gpt
insmod part_msdos
insmod ext2
search --no-floppy --fs-uuid --set=root 89f71135-b459-4c74-bfa3-e9d27df4369d
configfile /boot/grub/grub.cfg
}
menuentry "Windows" {
insmod part_gpt
insmod fat
search --no-floppy --fs-uuid --set=root C071-9050 # UUID de la partition EFI
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
=================== nvme0n1p6/boot/grub/grub.cfg (filtered) ====================
Ubuntu 06bc0f51-50e8-4ed4-8090-903acdb7df3f
Ubuntu, avec Linux 5.10.47-051047-generic 06bc0f51-50e8-4ed4-8090-903acdb7df3f
System setup uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
======================== nvme0n1p6/etc/fstab (filtered) ========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/nvme0n1p6 during installation
UUID=06bc0f51-50e8-4ed4-8090-903acdb7df3f / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/nvme0n1p3 during installation
UUID=C071-9050 /boot/efi vfat umask=0077 0 1
UUID=01c9b796-0869-4ff9-a2a1-6c0f56ed5257 /datas ext4 defaults 0 2
# swap was on /dev/sdc3 during installation
UUID=61218fe2-0bd1-4ada-9dd3-5ec996a02456 none swap sw 0 0
/dev/disk/by-label/Western_8T /Vidéos ext4 defaults 0 2
==================== nvme0n1p6/etc/default/grub (filtered) =====================
GRUB_DEFAULT=5
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="splash"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=true
GRUB_GFXMODE=1920x1080
================= nvme0n1p6/boot/refind_linux.conf (filtered) ==================
"Boot with standard options" "root=UUID=06bc0f51-50e8-4ed4-8090-903acdb7df3f ro splash vt.handoff=1"
"Boot to single-user mode" "root=UUID=06bc0f51-50e8-4ed4-8090-903acdb7df3f ro splash vt.handoff=1 single"
"Boot with minimal options" "ro root=/dev/nvme0n1p6"
================= nvme0n1p6: Location of files loaded by Grub ==================
GiB - GB File Fragment(s)
208.690097809 = 224.079286272 boot/grub/grub.cfg 1
191.351448059 = 205.462052864 boot/vmlinuz-5.10.47-051047-generic 2
191.351448059 = 205.462052864 vmlinuz 2
191.351448059 = 205.462052864 vmlinuz.old 2
192.448886871 = 206.640418816 boot/initrd.img-5.10.47-051047-generic 2
192.448886871 = 206.640418816 initrd.img 2
192.448886871 = 206.640418816 initrd.img.old 2
=================== nvme0n1p6: ls -l /etc/grub.d/ (filtered) ===================
-rwxr-xr-x 1 root root 12808 janv. 7 2021 10_linux
-rwxr-xr-x 1 root root 11298 févr. 8 2019 20_linux_xen
-rwxr-xr-x 1 root root 12059 févr. 8 2019 30_os-prober
-rwxr-xr-x 1 root root 1418 févr. 8 2019 30_uefi-firmware
-rwxr-xr-x 1 root root 214 févr. 8 2019 40_custom
-rwxr-xr-x 1 root root 216 févr. 8 2019 41_custom
=================== nvme0n1p7/boot/grub/grub.cfg (filtered) ====================
Ubuntu 8ab22881-60b3-47aa-a0bf-54c292afae81
Ubuntu, avec Linux 5.13.0-25-generic 8ab22881-60b3-47aa-a0bf-54c292afae81
Ubuntu, avec Linux 5.13.0-23-generic 8ab22881-60b3-47aa-a0bf-54c292afae81
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
Debian GNU/Linux debian
Linux Mint linux-mint
Ubuntu 18.04.6 LTS Ubuntu 18
Ubuntu 21.04 Ubuntu 21
Windows
======================== nvme0n1p7/etc/fstab (filtered) ========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/nvme0n1p7 during installation
UUID=8ab22881-60b3-47aa-a0bf-54c292afae81 / ext4 errors=remount-ro,noatime 0 1
# /boot/efi was on /dev/nvme0n1p3 during installation
UUID=C071-9050 /boot/efi vfat defaults 0 1
# swap was on /dev/sdc4 during installation
UUID=61218fe2-0bd1-4ada-9dd3-5ec996a02456 none swap sw 0 0
UUID=01c9b796-0869-4ff9-a2a1-6c0f56ed5257 /datas ext4 defaults 0 2
/dev/disk/by-label/Western_8T /Vidéos ext4 defaults,noatime 0 2
tmpfs /tmp tmpfs defaults,noatime 0 0
tmpfs /mnt/ramdisk tmpfs rw,noatime,size=28G 0 0
tmpfs /media/ramdisk tmpfs rw,noatime,size=28G 0 0
==================== nvme0n1p7/etc/default/grub (filtered) =====================
GRUB_DEFAULT=0
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=true
================= nvme0n1p7: Location of files loaded by Grub ==================
GiB - GB File Fragment(s)
253.447078705 = 272.136728576 boot/grub/grub.cfg 3
239.060306549 = 256.689049600 boot/vmlinuz 2
244.396244049 = 262.418468864 boot/vmlinuz-5.13.0-23-generic 2
239.060306549 = 256.689049600 boot/vmlinuz-5.13.0-25-generic 2
244.396244049 = 262.418468864 boot/vmlinuz.old 2
248.753902435 = 267.097468928 boot/initrd.img 2
248.879829407 = 267.232681984 boot/initrd.img-5.13.0-23-generic 3
248.753902435 = 267.097468928 boot/initrd.img-5.13.0-25-generic 2
248.879829407 = 267.232681984 boot/initrd.img.old 3
=================== nvme0n1p7: ls -l /etc/grub.d/ (filtered) ===================
-rwxr-xr-x 1 root root 18151 sept. 2 14:37 10_linux
-rwxr-xr-x 1 root root 43031 sept. 2 14:37 10_linux_zfs
-rwxr-xr-x 1 root root 12894 sept. 2 14:37 20_linux_xen
-rwxr-xr-x 1 root root 12059 sept. 2 14:37 30_os-prober
-rwxr-xr-x 1 root root 1424 sept. 2 14:37 30_uefi-firmware
-rwxr-xr-x 1 root root 1568 nov. 19 18:30 40_custom
-rwxr-xr-x 1 root root 216 sept. 2 14:37 41_custom
======================== nvme0n1p7/etc/grub.d/40_custom ========================
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry 'Debian GNU/Linux' --class gnu-linux --class gnu --class os --id 'debian' {
insmod part_gpt
insmod part_msdos
insmod ext2
search --no-floppy --fs-uuid --set=root eb4da8d1-c3ea-4788-9692-e9e23690066e
configfile /boot/grub/grub.cfg
}
menuentry 'Linux Mint' --class linuxmint --class gnu-linux --class gnu --class os --id 'linux-mint' {
insmod part_gpt
insmod part_msdos
insmod ext2
search --no-floppy --fs-uuid --set=root eb18366b-2ac9-4a7e-8f93-ba2caa30e90e
configfile /boot/grub/grub.cfg
}
menuentry 'Ubuntu 18.04.6 LTS' --class ubuntu --class gnu-linux --class gnu --class os --id 'Ubuntu 18' {
insmod part_gpt
insmod part_msdos
insmod ext2
search --no-floppy --fs-uuid --set=root 06bc0f51-50e8-4ed4-8090-903acdb7df3f
configfile /boot/grub/grub.cfg
}
menuentry 'Ubuntu 21.04' --class ubuntu --class gnu-linux --class gnu --class os --id 'Ubuntu 21' {
insmod part_gpt
insmod part_msdos
insmod ext2
search --no-floppy --fs-uuid --set=root 89f71135-b459-4c74-bfa3-e9d27df4369d
configfile /boot/grub/grub.cfg
}
menuentry "Windows" {
insmod part_gpt
insmod fat
search --no-floppy --fs-uuid --set=root C071-9050 # UUID de la partition EFI
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
====================== sda3/boot/grub/grub.cfg (filtered) ======================
Ubuntu 89f71135-b459-4c74-bfa3-e9d27df4369d
Ubuntu, avec Linux 5.11.0-41-generic 89f71135-b459-4c74-bfa3-e9d27df4369d
Ubuntu, avec Linux 5.11.0-40-generic 89f71135-b459-4c74-bfa3-e9d27df4369d
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
========================== sda3/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda3 during installation
UUID=89f71135-b459-4c74-bfa3-e9d27df4369d / ext3 errors=remount-ro 0 1
# /boot/efi was on /dev/nvme0n1p3 during installation
UUID=C071-9050 /boot/efi vfat umask=0077 0 1
# swap was on /dev/sdc4 during installation
UUID=61218fe2-0bd1-4ada-9dd3-5ec996a02456 none swap sw 0 0
======================= sda3/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=true
==================== sda3: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
3530.697231293 = 3791.057285120 boot/grub/grub.cfg 3
3526.405452728 = 3786.449022976 boot/vmlinuz 8
3527.597869873 = 3787.729371136 boot/vmlinuz-5.11.0-40-generic 8
3526.405452728 = 3786.449022976 boot/vmlinuz-5.11.0-41-generic 8
3527.597869873 = 3787.729371136 boot/vmlinuz.old 8
3529.861942291 = 3790.160400384 boot/initrd.img 13
3528.919483185 = 3789.148442624 boot/initrd.img-5.11.0-40-generic 9
3529.861942291 = 3790.160400384 boot/initrd.img-5.11.0-41-generic 13
3528.919483185 = 3789.148442624 boot/initrd.img.old 9
===================== sda3: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 18151 mars 30 2021 10_linux
-rwxr-xr-x 1 root root 43031 mars 30 2021 10_linux_zfs
-rwxr-xr-x 1 root root 12894 mars 30 2021 20_linux_xen
-rwxr-xr-x 1 root root 12059 mars 30 2021 30_os-prober
-rwxr-xr-x 1 root root 1424 mars 30 2021 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 30 2021 40_custom
-rwxr-xr-x 1 root root 216 mars 30 2021 41_custom
====================== sda4/boot/grub/grub.cfg (filtered) ======================
Debian GNU/Linux eb4da8d1-c3ea-4788-9692-e9e23690066e
Debian GNU/Linux, with Linux 5.10.0-10-amd64 eb4da8d1-c3ea-4788-9692-e9e23690066e
Debian GNU/Linux, with Linux 5.10.0-9-amd64 eb4da8d1-c3ea-4788-9692-e9e23690066e
### END /etc/grub.d/30_os-prober ###
System setup uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
========================== sda4/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=eb4da8d1-c3ea-4788-9692-e9e23690066e / ext4 defaults,noatime 0 1
# /boot/efi was on /dev/nvme0n1p3 during installation
UUID=C071-9050 /boot/efi vfat defaults 0 1
# swap was on /dev/sdc4 during installation
UUID=61218fe2-0bd1-4ada-9dd3-5ec996a02456 none swap sw 0 0
UUID=01c9b796-0869-4ff9-a2a1-6c0f56ed5257 /datas ext4 defaults 0 0
/dev/disk/by-label/Western_8T /Vidéos ext4 defaults 0 0
======================= sda4/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=true
==================== sda4: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
3504.514865875 = 3762.944184320 boot/grub/grub.cfg 2
3502.452659607 = 3760.729907200 boot/vmlinuz-5.10.0-10-amd64 2
3499.187252045 = 3757.223702528 boot/vmlinuz-5.10.0-9-amd64 1
3502.452659607 = 3760.729907200 vmlinuz 2
3499.187252045 = 3757.223702528 vmlinuz.old 1
3505.003444672 = 3763.468791808 boot/initrd.img-5.10.0-10-amd64 1
3505.800308228 = 3764.324417536 boot/initrd.img-5.10.0-9-amd64 1
3505.003444672 = 3763.468791808 initrd.img 1
3505.800308228 = 3764.324417536 initrd.img.old 1
===================== sda4: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 13664 juil. 11 2021 10_linux
-rwxr-xr-x 1 root root 13726 juil. 11 2021 20_linux_xen
-rwxr-xr-x 1 root root 12059 juil. 11 2021 30_os-prober
-rwxr-xr-x 1 root root 1416 juil. 11 2021 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juil. 11 2021 40_custom
-rwxr-xr-x 1 root root 216 juil. 11 2021 41_custom
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would purge (in order to unsign-grub) and reinstall the grub-efi of
nvme0n1p7,
using the following options: nvme0n1p3/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file restore-efi-backups
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the L'OS actuellement utilisé - Ubuntu 21.10 CurrentSession entry (nvme0n1p3/efi/****/grub****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\grub****.efi (**** will be updated in the final message)Dernière modification par iznobe (Le 18/01/2022, à 20:10)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#2 Le 18/01/2022, à 21:37
- inbox
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Salut,
Pour tenter de mieux y voir, donne le retour de :
sudo dmesg | grep ataA+
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#3 Le 19/01/2022, à 08:24
- iznobe
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Bonjour et merci pour ton aide , voici :
iznobe@iznobe-PC:~$ sudo dmesg | grep ata
[sudo] Mot de passe de iznobe :
[ 0.000000] BIOS-e820: [mem 0x000000006ed9d000-0x000000006eeccfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000040400000-0x0000000068321017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000068321018-0x000000006832e857] usable
[ 0.000000] reserve setup_data: [mem 0x000000006832e858-0x000000006832f017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006832f018-0x000000006834ca57] usable
[ 0.000000] reserve setup_data: [mem 0x000000006834ca58-0x000000006acacfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006acad000-0x000000006acadfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006acae000-0x000000006accefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006accf000-0x000000006accffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006acd0000-0x000000006e59cfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006e59d000-0x000000006ed9cfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006ed9d000-0x000000006eeccfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000006eecd000-0x000000006f143fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006f144000-0x000000006fffdfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006fffe000-0x000000006fffefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000007d7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000008807fffff] usable
[ 0.015628] ACPI: UEFI 0x000000006EF4C000 00063A (v01 INTEL RstSataE 00000000 ?? 00000000)
[ 0.015631] ACPI: UEFI 0x000000006EF4B000 00005C (v01 INTEL RstSataV 00000000 ?? 00000000)
[ 0.128570] Memory: 32484380K/33268968K available (16393K kernel code, 3510K rwdata, 10508K rodata, 2860K init, 5768K bss, 784328K reserved, 0K cma-reserved)
[ 0.380223] libata version 3.00 loaded.
[ 1.012816] Write protecting the kernel read-only data: 30720k
[ 1.014176] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 1.014957] Freeing unused kernel image (rodata/data gap) memory: 1780K
[ 1.191029] ata1: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02100 irq 123
[ 1.191032] ata2: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02180 irq 123
[ 1.191034] ata3: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02200 irq 123
[ 1.191036] ata4: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02280 irq 123
[ 1.191038] ata5: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02300 irq 123
[ 1.191040] ata6: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02380 irq 123
[ 1.490153] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.490191] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.491347] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.491466] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.491501] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.491653] ata6.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
[ 1.491655] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 1.491754] ata1.00: ATA-10: ST4000VX000-2AG166, CV11, max UDMA/133
[ 1.491755] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.493120] ata1.00: configured for UDMA/133
[ 1.493543] ata6.00: configured for UDMA/133
[ 1.495302] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.496488] ata3.00: ATA-8: TOSHIBA HDWD130, MX6OACF0, max UDMA/133
[ 1.496489] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.497113] ata2.00: ATA-9: WDC WD82PURZ-85TEUY0, 82.00A82, max UDMA/133
[ 1.497115] ata2.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.497733] ata3.00: configured for UDMA/133
[ 1.505618] ata2.00: configured for UDMA/133
[ 15.957907] EXT4-fs (nvme0n1p7): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 16.161206] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 31.956052] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 31.959777] ata6.00: configured for UDMA/133
[ 32.343679] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 32.598882] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 4086.264507] ata5: SATA link down (SStatus 4 SControl 300)
[ 4086.264559] ata4: SATA link down (SStatus 4 SControl 300)
[ 4091.301772] ata1: link is slow to respond, please be patient (ready=0)
[ 4091.305747] ata3: link is slow to respond, please be patient (ready=0)
[ 4091.305770] ata2: link is slow to respond, please be patient (ready=0)
[ 4091.317782] ata6: link is slow to respond, please be patient (ready=0)
[ 4092.637769] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4092.654209] ata6.00: configured for UDMA/133
[ 4095.325743] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4095.328638] ata3.00: configured for UDMA/133
[ 4095.981718] ata1: COMRESET failed (errno=-16)
[ 4095.985719] ata2: COMRESET failed (errno=-16)
[ 4096.353725] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4096.357549] ata1.00: configured for UDMA/133
[ 4101.337676] ata2: link is slow to respond, please be patient (ready=0)
[ 4101.997691] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4102.415483] ata2.00: configured for UDMA/133
[57828.896887] ata4: SATA link down (SStatus 4 SControl 300)
[57828.900796] ata5: SATA link down (SStatus 4 SControl 300)
[57833.933596] ata2: link is slow to respond, please be patient (ready=0)
[57833.937577] ata6: link is slow to respond, please be patient (ready=0)
[57833.937599] ata3: link is slow to respond, please be patient (ready=0)
[57833.941600] ata1: link is slow to respond, please be patient (ready=0)
[57835.257560] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[57835.276847] ata6.00: configured for UDMA/133
[57837.969519] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[57837.972361] ata3.00: configured for UDMA/133
[57838.557511] ata2: COMRESET failed (errno=-16)
[57838.561503] ata1: COMRESET failed (errno=-16)
[57838.993526] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[57838.997199] ata1.00: configured for UDMA/133
[57843.913412] ata2: link is slow to respond, please be patient (ready=0)
[57844.761419] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[57844.925534] ata2.00: configured for UDMA/133
[61013.766382] ata4: SATA link down (SStatus 4 SControl 300)
[61013.766426] ata5: SATA link down (SStatus 4 SControl 300)
[61018.806864] ata2: link is slow to respond, please be patient (ready=0)
[61018.806887] ata3: link is slow to respond, please be patient (ready=0)
[61018.806908] ata6: link is slow to respond, please be patient (ready=0)
[61018.814876] ata1: link is slow to respond, please be patient (ready=0)
[61019.766798] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[61019.782822] ata6.00: configured for UDMA/133
[61022.842501] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[61022.845509] ata3.00: configured for UDMA/133
[61023.426439] ata2: COMRESET failed (errno=-16)
[61023.498445] ata1: COMRESET failed (errno=-16)
[61023.870425] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[61023.874198] ata1.00: configured for UDMA/133
[61028.777945] ata2: link is slow to respond, please be patient (ready=0)
[61029.617886] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[61030.038941] ata2.00: configured for UDMA/133
[68232.115012] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[68232.122930] EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[68232.210272] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[68232.237941] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[68232.527065] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[68234.104512] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[68234.279357] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[68234.533094] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[77233.455209] ata5: SATA link down (SStatus 4 SControl 300)
[77233.459220] ata4: SATA link down (SStatus 4 SControl 300)
[77238.460777] ata3: link is slow to respond, please be patient (ready=0)
[77238.496798] ata2: link is slow to respond, please be patient (ready=0)
[77238.500792] ata1: link is slow to respond, please be patient (ready=0)
[77238.512796] ata6: link is slow to respond, please be patient (ready=0)
[77239.836792] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[77239.847126] ata6.00: configured for UDMA/133
[77242.600748] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[77242.603644] ata3.00: configured for UDMA/133
[77243.144729] ata2: COMRESET failed (errno=-16)
[77243.148723] ata1: COMRESET failed (errno=-16)
[77243.520720] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[77243.524310] ata1.00: configured for UDMA/133
[77248.512604] ata2: link is slow to respond, please be patient (ready=0)
[77249.232569] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[77249.406218] ata2.00: configured for UDMA/133
iznobe@iznobe-PC:~$ retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#4 Le 19/01/2022, à 11:16
- inbox
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Tu devrais vérifier que le branchement Sata de tes disques dur sont OK. La qualité du câble peut aussi être en cause. Si tu en as de rechange essaye avec.
D'un autre côté on va vérifier l'état Smart du Nvme :
sudo apt install smartmontoolls nvme-cliEnsuite :
sudo nvme error-log /dev/nvme0n1
sudo nvme smart-log /dev/nvme0n1Pour la 21.10, il y a une nouveau noyau de disponible. Peux-tu l'installer et vérifier si tu trouves toujours les mêmes erreurs dans Dmesg ?
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#5 Le 19/01/2022, à 12:35
- iznobe
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Alors voici les retours :
iznobe@iznobe-PC:~$ sudo nvme error-log /dev/nvme0n1
[sudo] Mot de passe de iznobe :
Error Log Entries for device:nvme0n1 entries:64
.................
Entry[ 0]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 1]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 2]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 3]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 4]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 5]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 6]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 7]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 8]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 9]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[10]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[11]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[12]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[13]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[14]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[15]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[16]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[17]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[18]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[19]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[20]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[21]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[22]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[23]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[24]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[25]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[26]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[27]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[28]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[29]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[30]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[31]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[32]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[33]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[34]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[35]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[36]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[37]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[38]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[39]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[40]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[41]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[42]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[43]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[44]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[45]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[46]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[47]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[48]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[49]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[50]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[51]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[52]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[53]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[54]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[55]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[56]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[57]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[58]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[59]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[60]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[61]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[62]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[63]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
iznobe@iznobe-PC:~$ sudo nvme smart-log /dev/nvme0n1
Smart Log for NVME device:nvme0n1 namespace-id:ffffffff
critical_warning : 0
temperature : 27 C
available_spare : 100%
available_spare_threshold : 10%
percentage_used : 1%
endurance group critical warning summary: 0
data_units_read : 9451286
data_units_written : 7738082
host_read_commands : 77682971
host_write_commands : 69630844
controller_busy_time : 2009
power_cycles : 629
power_on_hours : 6480
unsafe_shutdowns : 28
media_errors : 0
num_err_log_entries : 0
Warning Temperature Time : 0
Critical Composite Temperature Time : 0
Temperature Sensor 2 : 27 C
Temperature Sensor 3 : 30 C
Temperature Sensor 4 : 20 C
Temperature Sensor 5 : 20 C
Temperature Sensor 6 : 27 C
Thermal Management T1 Trans Count : 3
Thermal Management T2 Trans Count : 0
Thermal Management T1 Total Time : 80
Thermal Management T2 Total Time : 0
iznobe@iznobe-PC:~$Pour le noyau actuel et la sortie dmesg :
iznobe@iznobe-PC:~$ sudo dmesg | grep COMRESET
[ 4095.981718] ata1: COMRESET failed (errno=-16)
[ 4095.985719] ata2: COMRESET failed (errno=-16)
[57838.557511] ata2: COMRESET failed (errno=-16)
[57838.561503] ata1: COMRESET failed (errno=-16)
[61023.426439] ata2: COMRESET failed (errno=-16)
[61023.498445] ata1: COMRESET failed (errno=-16)
[77243.144729] ata2: COMRESET failed (errno=-16)
[77243.148723] ata1: COMRESET failed (errno=-16)
[80537.236888] ata1: COMRESET failed (errno=-16)
[80537.236919] ata2: COMRESET failed (errno=-16)
iznobe@iznobe-PC:~$ Apres installation du nouveau noyau et redemarrage :
iznobe@iznobe-PC:~$ uname -a
Linux iznobe-PC 5.13.0-27-generic #29-Ubuntu SMP Wed Jan 12 17:36:47 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
iznobe@iznobe-PC:~$ sudo dmesg | grep COMRESET
[sudo] Mot de passe de iznobe :
iznobe@iznobe-PC:~$ sudo dmesg | grep ata
[ 0.000000] BIOS-e820: [mem 0x000000006ed9d000-0x000000006eeccfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000040400000-0x0000000068321017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000068321018-0x000000006832e857] usable
[ 0.000000] reserve setup_data: [mem 0x000000006832e858-0x000000006832f017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006832f018-0x000000006834ca57] usable
[ 0.000000] reserve setup_data: [mem 0x000000006834ca58-0x000000006acacfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006acad000-0x000000006acadfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006acae000-0x000000006accefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006accf000-0x000000006accffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006acd0000-0x000000006e59cfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006e59d000-0x000000006ed9cfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006ed9d000-0x000000006eeccfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000006eecd000-0x000000006f143fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006f144000-0x000000006fffdfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006fffe000-0x000000006fffefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000007d7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000008807fffff] usable
[ 0.015200] ACPI: UEFI 0x000000006EF4C000 00063A (v01 INTEL RstSataE 00000000 ?? 00000000)
[ 0.015203] ACPI: UEFI 0x000000006EF4B000 00005C (v01 INTEL RstSataV 00000000 ?? 00000000)
[ 0.128124] Memory: 32484384K/33268968K available (16393K kernel code, 3510K rwdata, 10508K rodata, 2860K init, 5768K bss, 784324K reserved, 0K cma-reserved)
[ 0.383226] libata version 3.00 loaded.
[ 1.008216] Write protecting the kernel read-only data: 30720k
[ 1.009585] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 1.010372] Freeing unused kernel image (rodata/data gap) memory: 1780K
[ 1.165590] ata1: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02100 irq 125
[ 1.165592] ata2: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02180 irq 125
[ 1.165593] ata3: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02200 irq 125
[ 1.165595] ata4: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02280 irq 125
[ 1.165596] ata5: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02300 irq 125
[ 1.165597] ata6: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02380 irq 125
[ 1.465735] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.466804] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.466845] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.466857] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.466869] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.468037] ata3.00: ATA-8: TOSHIBA HDWD130, MX6OACF0, max UDMA/133
[ 1.468038] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.468331] ata6.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
[ 1.468333] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 1.468447] ata1.00: ATA-10: ST4000VX000-2AG166, CV11, max UDMA/133
[ 1.468448] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.469298] ata3.00: configured for UDMA/133
[ 1.469794] ata1.00: configured for UDMA/133
[ 1.470206] ata6.00: configured for UDMA/133
[ 1.470826] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.472331] ata2.00: ATA-9: WDC WD82PURZ-85TEUY0, 82.00A82, max UDMA/133
[ 1.472332] ata2.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.481015] ata2.00: configured for UDMA/133
[ 2.419129] EXT4-fs (nvme0n1p7): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 2.616002] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 18.387445] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.390929] ata6.00: configured for UDMA/133
[ 19.064190] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 19.116616] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
iznobe@iznobe-PC:~$ Dernière modification par iznobe (Le 19/01/2022, à 13:04)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#6 Le 19/01/2022, à 12:39
- inbox
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Pas d'erreur Smart. Voir les câbles Sata...
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#7 Le 19/01/2022, à 13:04
- iznobe
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
apres mise en veille de l' ordi :
iznobe@iznobe-PC:~$ sudo dmesg | grep COMRESET
[ 1460.266257] ata2: COMRESET failed (errno=-16)
[ 1460.322255] ata1: COMRESET failed (errno=-16)
iznobe@iznobe-PC:~$ sudo dmesg | grep ata
[ 0.000000] BIOS-e820: [mem 0x000000006ed9d000-0x000000006eeccfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000040400000-0x0000000068321017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000068321018-0x000000006832e857] usable
[ 0.000000] reserve setup_data: [mem 0x000000006832e858-0x000000006832f017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006832f018-0x000000006834ca57] usable
[ 0.000000] reserve setup_data: [mem 0x000000006834ca58-0x000000006acacfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006acad000-0x000000006acadfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006acae000-0x000000006accefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006accf000-0x000000006accffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006acd0000-0x000000006e59cfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006e59d000-0x000000006ed9cfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006ed9d000-0x000000006eeccfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000006eecd000-0x000000006f143fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006f144000-0x000000006fffdfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006fffe000-0x000000006fffefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000007d7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000008807fffff] usable
[ 0.015200] ACPI: UEFI 0x000000006EF4C000 00063A (v01 INTEL RstSataE 00000000 ?? 00000000)
[ 0.015203] ACPI: UEFI 0x000000006EF4B000 00005C (v01 INTEL RstSataV 00000000 ?? 00000000)
[ 0.128124] Memory: 32484384K/33268968K available (16393K kernel code, 3510K rwdata, 10508K rodata, 2860K init, 5768K bss, 784324K reserved, 0K cma-reserved)
[ 0.383226] libata version 3.00 loaded.
[ 1.008216] Write protecting the kernel read-only data: 30720k
[ 1.009585] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 1.010372] Freeing unused kernel image (rodata/data gap) memory: 1780K
[ 1.165590] ata1: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02100 irq 125
[ 1.165592] ata2: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02180 irq 125
[ 1.165593] ata3: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02200 irq 125
[ 1.165595] ata4: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02280 irq 125
[ 1.165596] ata5: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02300 irq 125
[ 1.165597] ata6: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02380 irq 125
[ 1.465735] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.466804] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.466845] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.466857] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.466869] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.468037] ata3.00: ATA-8: TOSHIBA HDWD130, MX6OACF0, max UDMA/133
[ 1.468038] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.468331] ata6.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
[ 1.468333] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 1.468447] ata1.00: ATA-10: ST4000VX000-2AG166, CV11, max UDMA/133
[ 1.468448] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.469298] ata3.00: configured for UDMA/133
[ 1.469794] ata1.00: configured for UDMA/133
[ 1.470206] ata6.00: configured for UDMA/133
[ 1.470826] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.472331] ata2.00: ATA-9: WDC WD82PURZ-85TEUY0, 82.00A82, max UDMA/133
[ 1.472332] ata2.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.481015] ata2.00: configured for UDMA/133
[ 2.419129] EXT4-fs (nvme0n1p7): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 2.616002] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 18.387445] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.390929] ata6.00: configured for UDMA/133
[ 19.064190] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 19.116616] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 1450.605078] ata4: SATA link down (SStatus 4 SControl 300)
[ 1450.605093] ata5: SATA link down (SStatus 4 SControl 300)
[ 1455.642300] ata1: link is slow to respond, please be patient (ready=0)
[ 1455.642323] ata3: link is slow to respond, please be patient (ready=0)
[ 1455.646305] ata2: link is slow to respond, please be patient (ready=0)
[ 1455.658305] ata6: link is slow to respond, please be patient (ready=0)
[ 1456.798314] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1456.815065] ata6.00: configured for UDMA/133
[ 1458.942275] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1458.945278] ata3.00: configured for UDMA/133
[ 1460.266257] ata2: COMRESET failed (errno=-16)
[ 1460.322255] ata1: COMRESET failed (errno=-16)
[ 1460.641099] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1460.644514] ata1.00: configured for UDMA/133
[ 1465.438215] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1465.600651] ata2.00: configured for UDMA/133
iznobe@iznobe-PC:~$ retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#8 Le 19/01/2022, à 19:19
- inbox
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Mis à part les erreurs dont tu as parlé, rencontres tu des problèmes de fonctionnement ?
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#9 Le 19/01/2022, à 19:35
- iznobe
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
j ' en avais avant , je devais faire assez regulierment des fsck des partitions de mes OS . Mais là , depuis environ 3 mois pas de problemes specifiques a signaler au cours de l' utilisation .
Mais je n' aime pas voir des erreurs apparaitrent 
surtout si je n ' arrive pas a les corriger .
Dernière modification par iznobe (Le 19/01/2022, à 19:36)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#10 Le 20/01/2022, à 00:35
- inbox
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Quels problèmes exactement ?
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#11 Le 20/01/2022, à 06:53
- iznobe
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Bonjour , l ' os que je choisissais ne demarrais pas et ca affichait de faire une verifiacation du FS , donc je demarrais un autre OS , puis je lancais :
sudo fsck -fyv /dev/xxx avec xxx la partition adequate , ca corrigeait les erreurs puis ca repartait .
le plus souvent c' etait les partitions / d ' ubuntu et LM ( en meme temps c ' est les 2 OS que j' utilise le + ) qui sont situés sur le nvme curieusement et pas sur disque SATA .
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#12 Le 20/01/2022, à 14:51
- inbox
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Tu n'as pas répondu à propos des vérifications des câbles Sata et de leur éventuel remplacement.
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#13 Le 20/01/2022, à 15:13
- iznobe
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Bonjour , les cables , ils sont visuellement en bon etat et ils ont moins d' un an , c ' est l' ordi dans ma signature qui est concernée par ce soucis , j ' ai donc utilisé les cables neufs fournis avec la CM . le BIOS est a jour et date de 11/2021 .
j ' en ai d ' avance des plus vieux , et peux tester de les remplacer , mais vu que je n ' ai a priori plus de soucis de puis plus de 3 mois et que j' ai toujours les erreurs qui n' apparraissent qu ' en sortie de veille , j ' ai du mal a me dire que le soucis peut provenir des cables .
Si je met l' ordi en veille et le reveille , j ' ai a chaque fois 2 nouvelles erreurs qui apparraissent dans DMESG , une pour SATA1 et l' autre pour SATA2 .
Du coup je vois plus un rapport avec le reveil que les cables non ?
Dernière modification par iznobe (Le 20/01/2022, à 15:15)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#14 Le 20/01/2022, à 16:01
- inbox
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Ok, pour ce qui est des câbles.
Lorsque tu mets un de tes système en veille, est-ce que tu redémarres toujours sur le même système ensuite, ou sur un autre ?
Vu que tu as plusieurs Linux sur ta machine, rencontres-tu les mêmes messages disque sur tous ?
Donne le retour de :
sudo lshwDernière modification par inbox (Le 20/01/2022, à 18:26)
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#15 Le 20/01/2022, à 18:06
- iznobe
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Bonjour , et voici :
iznobe@iznobe-PC:~$ sudo lshw -sanitize
[sudo] Mot de passe de iznobe :
computer
description: Ordinateur de Bureau
produit: MS-7C75 (Default string)
fabricant: Micro-Star International Co., Ltd.
version: 1.0
numéro de série: [REMOVED]
bits: 64 bits
fonctionnalités: smbios-3.2.0 dmi-3.2.0 smp vsyscall32
configuration : boot=normal chassis=desktop family=Default string sku=Default string uuid=[REMOVED]
*-core
description: Carte mère
produit: Z490-A PRO (MS-7C75)
fabricant: Micro-Star International Co., Ltd.
identifiant matériel: 0
version: 1.0
numéro de série: [REMOVED]
emplacement: Default string
*-firmware
description: BIOS
fabricant: American Megatrends Inc.
identifiant matériel: 0
version: 2.C0
date: 10/20/2021
taille: 64KiB
capacité: 32MiB
fonctionnalités: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
*-memory
description: Mémoire Système
identifiant matériel: 3a
emplacement: Carte mère
taille: 32GiB
*-bank:0
description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2021-09-04 03:15+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-10-08 02:45+0000X-Generator: Launchpad (build 9996942467ffa90f183140d942a30ca179585ccf)Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2021-09-04 03:15+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-10-08 02:45+0000X-Generator: Launchpad (build 9996942467ffa90f183140d942a30ca179585ccf) [vide]
identifiant matériel: 0
emplacement: ChannelA-DIMM0
*-bank:1
description: DIMM DDR4 Synchrone 3294 MHz (0,3 ns)
produit: F4-3200C16-16GIS
fabricant: Fujitsu
identifiant matériel: 1
numéro de série: [REMOVED]
emplacement: ChannelA-DIMM1
taille: 16GiB
bits: 64 bits
horloge: 3294MHz (0.3ns)
*-bank:2
description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2021-09-04 03:15+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-10-08 02:45+0000X-Generator: Launchpad (build 9996942467ffa90f183140d942a30ca179585ccf)Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2021-09-04 03:15+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-10-08 02:45+0000X-Generator: Launchpad (build 9996942467ffa90f183140d942a30ca179585ccf) [vide]
identifiant matériel: 2
emplacement: ChannelB-DIMM0
*-bank:3
description: DIMM DDR4 Synchrone 3294 MHz (0,3 ns)
produit: F4-3200C16-16GIS
fabricant: Fujitsu
identifiant matériel: 3
numéro de série: [REMOVED]
emplacement: ChannelB-DIMM1
taille: 16GiB
bits: 64 bits
horloge: 3294MHz (0.3ns)
*-cache:0
description: L1 cache
identifiant matériel: 47
emplacement: L1 Cache
taille: 512KiB
capacité: 512KiB
fonctionnalités: synchronous internal write-back unified
configuration : level=1
*-cache:1
description: L2 cache
identifiant matériel: 48
emplacement: L2 Cache
taille: 2MiB
capacité: 2MiB
fonctionnalités: synchronous internal write-back unified
configuration : level=2
*-cache:2
description: L3 cache
identifiant matériel: 49
emplacement: L3 Cache
taille: 16MiB
capacité: 16MiB
fonctionnalités: synchronous internal write-back unified
configuration : level=3
*-cpu
description: CPU
produit: Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz
fabricant: Intel Corp.
identifiant matériel: 4a
information bus: cpu@0
version: Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz
numéro de série: [REMOVED]
emplacement: U3E1
taille: 800MHz
capacité: 4800MHz
bits: 64 bits
horloge: 100MHz
fonctionnalités: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault invpcid_single ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust sgx bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp pku ospke sgx_lc md_clear flush_l1d arch_capabilities cpufreq
configuration : cores=8 enabledcores=8 threads=16
*-pci
description: Host bridge
produit: Intel Corporation
fabricant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 05
bits: 32 bits
horloge: 33MHz
configuration : driver=skl_uncore
ressources : irq:0
*-display
description: VGA compatible controller
produit: CometLake-S GT2 [UHD Graphics 630]
fabricant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
nom logique: /dev/fb0
version: 05
bits: 64 bits
horloge: 33MHz
fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list fb
configuration : depth=32 driver=i915 latency=0 mode=1920x1080 visual=truecolor xres=1920 yres=1080
ressources : mémoireE/S:600-5ff mémoireE/S:400-3ff irq:143 mémoire:6000000000-6000ffffff mémoire:4000000000-400fffffff portE/S:4000(taille=64) mémoire:c0000-dffff
*-generic:0 NON-RÉCLAMÉ
description: System peripheral
produit: Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
fabricant: Intel Corporation
identifiant matériel: 8
information bus: pci@0000:00:08.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: msi pm cap_list
configuration : latency=0
ressources : mémoireE/S:600-5ff mémoire:600111a000-600111afff
*-generic:1
description: Signal processing controller
produit: Comet Lake PCH Thermal Controller
fabricant: Intel Corporation
identifiant matériel: 12
information bus: pci@0000:00:12.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi cap_list
configuration : driver=intel_pch_thermal latency=0
ressources : mémoireE/S:600-5ff irq:16 mémoire:6001119000-6001119fff
*-usb
description: USB controller
produit: Comet Lake USB 3.1 xHCI Host Controller
fabricant: Intel Corporation
identifiant matériel: 14
information bus: pci@0000:00:14.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi xhci bus_master cap_list
configuration : driver=xhci_hcd latency=0
ressources : mémoireE/S:600-5ff irq:124 mémoire:6001100000-600110ffff
*-usbhost:0
produit: xHCI Host Controller
fabricant: Linux 5.13.0-27-generic xhci-hcd
identifiant matériel: 0
information bus: usb@1
nom logique: usb1
version: 5.13
fonctionnalités: usb-2.00
configuration : driver=hub slots=16 speed=480Mbit/s
*-usb:0
description: Clavier
produit: USB-compliant keyboard
fabricant: EzKEY Corp.
identifiant matériel: 9
information bus: usb@1:9
version: 1.00
fonctionnalités: usb-1.10
configuration : driver=usbhid maxpower=100mA speed=1Mbit/s
*-usb:1
description: Souris
produit: G700 Laser Mouse
fabricant: Logitech
identifiant matériel: a
information bus: usb@1:a
version: 65.02
numéro de série: [REMOVED]
fonctionnalités: usb-2.00
configuration : driver=usbhid maxpower=498mA speed=12Mbit/s
*-usb:2
description: Concentrateur USB
produit: USB2.0 Hub
fabricant: Genesys Logic, Inc.
identifiant matériel: b
information bus: usb@1:b
version: 88.32
fonctionnalités: usb-2.00
configuration : driver=hub maxpower=100mA slots=4 speed=480Mbit/s
*-usb:3
description: Périphérique d'interface homme/machine
produit: MYSTIC LIGHT
fabricant: MSI
identifiant matériel: c
information bus: usb@1:c
version: 0.01
numéro de série: [REMOVED]
fonctionnalités: usb-1.10
configuration : driver=usbhid maxpower=500mA speed=12Mbit/s
*-usbhost:1
produit: xHCI Host Controller
fabricant: Linux 5.13.0-27-generic xhci-hcd
identifiant matériel: 1
information bus: usb@2
nom logique: usb2
version: 5.13
fonctionnalités: usb-3.10
configuration : driver=hub slots=10 speed=10000Mbit/s
*-memory NON-RÉCLAMÉ
description: RAM memory
produit: Comet Lake PCH Shared SRAM
fabricant: Intel Corporation
identifiant matériel: 14.2
information bus: pci@0000:00:14.2
version: 00
bits: 64 bits
horloge: 33MHz (30.3ns)
fonctionnalités: pm cap_list
configuration : latency=0
ressources : mémoireE/S:600-5ff mémoireE/S:600-5ff mémoire:6001114000-6001115fff mémoire:6001118000-6001118fff
*-communication
description: Communication controller
produit: Comet Lake HECI Controller
fabricant: Intel Corporation
identifiant matériel: 16
information bus: pci@0000:00:16.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration : driver=mei_me latency=0
ressources : mémoireE/S:600-5ff irq:123 mémoire:6001117000-6001117fff
*-raid
description: RAID bus controller
produit: Comet Lake PCH-H RAID
fabricant: Intel Corporation
identifiant matériel: 17
information bus: pci@0000:00:17.0
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: raid msix pm bus_master cap_list
configuration : driver=ahci latency=0
ressources : irq:16 mémoire:7db00000-7db01fff mémoire:7db03000-7db030ff portE/S:4090(taille=8) portE/S:4080(taille=4) portE/S:4060(taille=32) mémoire:7db02000-7db027ff
*-pci:0
description: PCI bridge
produit: Intel Corporation
fabricant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: f0
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration : driver=pcieport
ressources : irq:120
*-pci:1
description: PCI bridge
produit: Intel Corporation
fabricant: Intel Corporation
identifiant matériel: 1c.4
information bus: pci@0000:00:1c.4
version: f0
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration : driver=pcieport
ressources : irq:121 portE/S:3000(taille=4096) mémoire:7da00000-7dafffff
*-network
description: Ethernet interface
produit: RTL8125 2.5GbE Controller
fabricant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: enp2s0
version: 04
numéro de série: [REMOVED]
taille: 1Gbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration : autonegotiation=on broadcast=yes driver=r8169 driverversion=5.13.0-27-generic duplex=full firmware=rtl8125b-2_0.0.2 07/13/20 ip=[REMOVED] latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
ressources : irq:16 portE/S:3000(taille=256) mémoire:7da00000-7da0ffff mémoire:7da10000-7da13fff
*-pci:2
description: PCI bridge
produit: Comet Lake PCI Express Root Port #9
fabricant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: f0
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration : driver=pcieport
ressources : irq:122 mémoire:7d900000-7d9fffff
*-storage
description: Non-Volatile memory controller
produit: XPG SX8200 Pro PCIe Gen3x4 M.2 2280 Solid State Drive
fabricant: ADATA Technology Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:03:00.0
version: 03
bits: 64 bits
horloge: 33MHz
fonctionnalités: storage pm msi pciexpress msix nvm_express bus_master cap_list
configuration : driver=nvme latency=0
ressources : irq:16 mémoire:7d900000-7d903fff
*-nvme0
description: NVMe device
produit: ADATA SX8200PNP
identifiant matériel: 0
nom logique: /dev/nvme0
version: 42A4SANA
numéro de série: [REMOVED]
configuration : nqn=nqn.2014.08.org.nvmexpress:1cc11cc12K0320065219 ADATA SX8200PNP state=live
*-namespace
description: NVMe namespace
identifiant matériel: 1
nom logique: /dev/nvme0n1
taille: 476GiB (512GB)
fonctionnalités: gpt-1.00 partitioned partitioned:gpt
configuration : guid=fa603a6b-ea88-11ea-84d7-2cf05d2920f2 logicalsectorsize=512 sectorsize=512
*-volume:0
description: Windows NTFS volume
fabricant: Windows
identifiant matériel: 1
nom logique: /dev/nvme0n1p1
version: 3.1
numéro de série: [REMOVED]
taille: 124GiB
capacité: 124GiB
fonctionnalités: ntfs initialized
configuration : clustersize=4096 created=2017-11-29 18:58:39 filesystem=ntfs label=windows_10 state=clean
*-volume:1
description: Windows NTFS volume
fabricant: Windows
identifiant matériel: 2
nom logique: /dev/nvme0n1p2
version: 3.1
numéro de série: [REMOVED]
taille: 618MiB
capacité: 636MiB
fonctionnalités: boot precious ntfs initialized
configuration : clustersize=4096 created=2021-10-10 09:18:47 filesystem=ntfs state=clean
*-volume:2
description: Windows FAT volume
fabricant: MSDOS5.0
identifiant matériel: 3
nom logique: /dev/nvme0n1p3
version: FAT32
numéro de série: [REMOVED]
taille: 81MiB
capacité: 99MiB
fonctionnalités: boot fat initialized
configuration : FATs=2 filesystem=fat label=SSD_EFI_WIN name=SSD_EFI_WIN
*-volume:3
description: Windows NTFS volume
fabricant: Windows
identifiant matériel: 4
nom logique: /dev/nvme0n1p4
version: 3.1
numéro de série: [REMOVED]
taille: 515MiB
capacité: 534MiB
fonctionnalités: boot precious ntfs initialized
configuration : clustersize=4096 created=2019-11-24 18:51:57 filesystem=ntfs state=clean
*-volume:4
description: Volume EXT4
fabricant: Linux
identifiant matériel: 5
nom logique: /dev/nvme0n1p5
version: 1.0
numéro de série: [REMOVED]
taille: 30GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
configuration : created=2020-08-25 09:02:54 filesystem=ext4 label=LM_SSD lastmountpoint=/mnt/boot-sav/nvme0n1p5 modified=2022-01-20 07:22:43 mounted=2022-01-20 07:22:07 name=LM_SSD state=clean
*-volume:5
description: Volume EXT4
fabricant: Linux
identifiant matériel: 6
nom logique: /dev/nvme0n1p6
version: 1.0
numéro de série: [REMOVED]
taille: 49GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration : created=2021-04-13 15:57:57 filesystem=ext4 label=ubuntu_SSD lastmountpoint=/mnt/boot-sav/nvme0n1p6 modified=2022-01-20 07:22:43 mounted=2022-01-20 07:22:07 name=ubuntu_SSD state=clean
*-volume:6
description: Volume EXT4
fabricant: Linux
identifiant matériel: 7
nom logique: /dev/nvme0n1p7
nom logique: /
version: 1.0
numéro de série: [REMOVED]
taille: 49GiB
capacité: 49GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration : created=2021-04-29 11:14:17 filesystem=ext4 label=budgie_SSD lastmountpoint=/ modified=2022-01-19 12:39:09 mount.fstype=ext4 mount.options=rw,noatime,errors=remount-ro mounted=2022-01-19 12:39:09 name=budgie_SSD state=mounted
*-isa
description: ISA bridge
produit: Intel Corporation
fabricant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master
configuration : latency=0
*-multimedia
description: Audio device
produit: Comet Lake PCH cAVS
fabricant: Intel Corporation
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration : driver=snd_hda_intel latency=32
ressources : mémoireE/S:600-5ff mémoireE/S:600-5ff irq:144 mémoire:6001110000-6001113fff mémoire:6001000000-60010fffff
*-serial:0
description: SMBus
produit: Comet Lake PCH SMBus Controller
fabricant: Intel Corporation
identifiant matériel: 1f.4
information bus: pci@0000:00:1f.4
version: 00
bits: 64 bits
horloge: 33MHz
configuration : driver=i801_smbus latency=0
ressources : mémoireE/S:600-5ff irq:16 mémoire:6001116000-60011160ff portE/S:efa0(taille=32)
*-serial:1 NON-RÉCLAMÉ
description: Serial bus controller
produit: Comet Lake PCH SPI Controller
fabricant: Intel Corporation
identifiant matériel: 1f.5
information bus: pci@0000:00:1f.5
version: 00
bits: 32 bits
horloge: 33MHz
configuration : latency=0
ressources : mémoire:fe010000-fe010fff
*-pnp00:00
produit: PnP device PNP0c02
identifiant matériel: 1
fonctionnalités: pnp
configuration : driver=system
*-pnp00:01
produit: PnP device PNP0c02
identifiant matériel: 2
fonctionnalités: pnp
configuration : driver=system
*-pnp00:02
produit: PnP device PNP0501
identifiant matériel: 3
fonctionnalités: pnp
configuration : driver=serial
*-pnp00:03
produit: PnP device PNP0c02
identifiant matériel: 4
fonctionnalités: pnp
configuration : driver=system
*-pnp00:04
produit: PnP device INT3f0d
fabricant: Interphase Corporation
identifiant matériel: 5
fonctionnalités: pnp
configuration : driver=system
*-pnp00:05
produit: PnP device PNP0c02
identifiant matériel: 6
fonctionnalités: pnp
configuration : driver=system
*-pnp00:06
produit: PnP device PNP0c02
identifiant matériel: 7
fonctionnalités: pnp
configuration : driver=system
*-pnp00:07
produit: PnP device PNP0c02
identifiant matériel: 8
fonctionnalités: pnp
configuration : driver=system
*-pnp00:08
produit: PnP device PNP0c02
identifiant matériel: 9
fonctionnalités: pnp
configuration : driver=system
*-pnp00:09
produit: PnP device PNP0c02
identifiant matériel: a
fonctionnalités: pnp
configuration : driver=system
*-scsi:0
identifiant matériel: b
nom logique: scsi0
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: ST4000VX000-2AG1
identifiant matériel: 0.0.0
information bus: scsi@0:0.0.0
nom logique: /dev/sda
version: CV11
numéro de série: [REMOVED]
taille: 3726GiB (4TB)
fonctionnalités: gpt-1.00 partitioned partitioned:gpt
configuration : ansiversion=5 guid=4297d0dc-c19e-4b15-995d-b37e6f591044 logicalsectorsize=512 sectorsize=4096
*-volume:0
description: Volume EXT4
fabricant: Linux
identifiant matériel: 1
information bus: scsi@0:0.0.0,1
nom logique: /dev/sda1
version: 1.0
numéro de série: [REMOVED]
taille: 3477GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration : created=2016-10-05 00:59:32 filesystem=ext4 label=Seagate_4T lastmountpoint=/media/iznobe/Seagate_4T modified=2022-01-20 07:22:43 mounted=2022-01-20 07:22:07 name=Seagate_4T state=clean
*-volume:1
description: Windows NTFS volume
fabricant: Windows
identifiant matériel: 2
information bus: scsi@0:0.0.0,2
nom logique: /dev/sda2
version: 3.1
numéro de série: [REMOVED]
taille: 195GiB
capacité: 195GiB
fonctionnalités: ntfs initialized
configuration : clustersize=4096 created=2021-10-04 16:56:42 filesystem=ntfs label=Win_Part name=Win_Part state=clean
*-volume:2
description: Volume EXT3
fabricant: Linux
identifiant matériel: 3
information bus: scsi@0:0.0.0,3
nom logique: /dev/sda3
version: 1.0
numéro de série: [REMOVED]
taille: 14GiB
fonctionnalités: journaled extended_attributes large_files ext3 ext2 initialized
configuration : created=2021-11-05 19:36:45 filesystem=ext3 label=ubuntu_secours lastmountpoint=/mnt/boot-sav/sda3 modified=2022-01-20 07:22:43 mounted=2022-01-20 07:22:07 name=ubuntu_secours state=clean
*-volume:3
description: Volume EXT4
fabricant: Linux
identifiant matériel: 4
information bus: scsi@0:0.0.0,4
nom logique: /dev/sda4
version: 1.0
numéro de série: [REMOVED]
taille: 19GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
configuration : created=2021-11-07 19:04:13 filesystem=ext4 label=Debian_bullseye lastmountpoint=/mnt/boot-sav/sda4 modified=2022-01-20 07:22:43 mounted=2022-01-20 07:22:08 name=Debian_bullseye state=clean
*-volume:4
description: Volume EXT4
fabricant: Linux
identifiant matériel: 5
information bus: scsi@0:0.0.0,5
nom logique: /dev/sda5
version: 1.0
numéro de série: [REMOVED]
taille: 19GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration : created=2021-11-23 21:16:48 filesystem=ext4 label=Android_8.1 modified=2022-01-20 07:22:43 mounted=2022-01-20 07:22:09 name=Android_8.1 state=clean
*-scsi:1
identifiant matériel: c
nom logique: scsi1
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: WDC WD82PURZ-85T
fabricant: Western Digital
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/sdb
version: 0A82
numéro de série: [REMOVED]
taille: 7452GiB (8001GB)
fonctionnalités: gpt-1.00 partitioned partitioned:gpt
configuration : ansiversion=5 guid=17f22efb-f01f-47e2-8be1-2c777695a6da logicalsectorsize=512 sectorsize=4096
*-volume:0
description: Volume EXT4
fabricant: Linux
identifiant matériel: 1
information bus: scsi@1:0.0.0,1
nom logique: /dev/sdb1
nom logique: /Vidéos
version: 1.0
numéro de série: [REMOVED]
taille: 6931GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
configuration : created=2020-08-28 21:23:45 filesystem=ext4 label=Western_8T lastmountpoint=/Vidéos modified=2022-01-19 12:39:25 mount.fstype=ext4 mount.options=rw,noatime mounted=2022-01-19 12:39:25 name=Western_8T state=mounted
*-volume:1
description: Volume EXT4
fabricant: Linux
identifiant matériel: 2
information bus: scsi@1:0.0.0,2
nom logique: /dev/sdb2
nom logique: /mnt
version: 1.0
numéro de série: [REMOVED]
taille: 520GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration : created=2020-08-31 08:59:51 filesystem=ext4 label=SAUV lastmountpoint=/media/iznobe/SAUV modified=2022-01-19 19:02:35 mount.fstype=ext4 mount.options=rw,relatime mounted=2022-01-19 19:02:35 name=SAUV state=mounted
*-scsi:2
identifiant matériel: d
nom logique: scsi2
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: TOSHIBA HDWD130
fabricant: Western Digital
identifiant matériel: 0.0.0
information bus: scsi@2:0.0.0
nom logique: /dev/sdc
version: ACF0
numéro de série: [REMOVED]
taille: 2794GiB (3TB)
fonctionnalités: gpt-1.00 partitioned partitioned:gpt
configuration : ansiversion=5 guid=8a59f3f8-fa05-4e27-8cdf-fecbd6fdefbc logicalsectorsize=512 sectorsize=4096
*-volume:0
description: Volume EXT4
fabricant: Linux
identifiant matériel: 3
information bus: scsi@2:0.0.0,3
nom logique: /dev/sdc3
nom logique: /datas
version: 1.0
numéro de série: [REMOVED]
taille: 2762GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration : created=2021-04-20 15:10:11 filesystem=ext4 label=datas lastmountpoint=/datas modified=2022-01-19 12:39:25 mount.fstype=ext4 mount.options=rw,relatime mounted=2022-01-19 12:39:25 name=datas state=mounted
*-volume:1
description: Linux swap volume
fabricant: Linux
identifiant matériel: 4
information bus: scsi@2:0.0.0,4
nom logique: /dev/sdc4
version: 1
numéro de série: [REMOVED]
taille: 31GiB
capacité: 31GiB
fonctionnalités: nofs swap initialized
configuration : filesystem=swap name=swap pagesize=4095
*-scsi:3
identifiant matériel: e
nom logique: scsi5
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: ST3500320AS
identifiant matériel: 0.0.0
information bus: scsi@5:0.0.0
nom logique: /dev/sdd
version: SD1A
numéro de série: [REMOVED]
taille: 465GiB (500GB)
fonctionnalités: gpt-1.00 partitioned partitioned:gpt
configuration : ansiversion=5 guid=4b69907e-b42d-4a13-b15b-000372e51df7 logicalsectorsize=512 sectorsize=512
*-volume
description: Volume EXT4
fabricant: Linux
identifiant matériel: 1
information bus: scsi@5:0.0.0,1
nom logique: /dev/sdd1
version: 1.0
numéro de série: [REMOVED]
taille: 465GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration : created=2021-05-30 09:10:10 filesystem=ext4 label=Sauvegardes lastmountpoint=/media/iznobe/Sauvegardes modified=2022-01-20 07:22:43 mounted=2022-01-20 07:22:09 name=Sauvegardes state=clean
*-power NON-RÉCLAMÉ
description: To Be Filled By O.E.M.
produit: To Be Filled By O.E.M.
fabricant: To Be Filled By O.E.M.
identifiant matériel: 1
version: To Be Filled By O.E.M.
numéro de série: [REMOVED]
capacité: 32768mWh
iznobe@iznobe-PC:~$ retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#16 Le 20/01/2022, à 18:29
- inbox
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
C'est Ok pour lshw.
Par contre, tu n'as pas répondu aux deux questions.
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#17 Le 20/01/2022, à 18:33
- iznobe
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
exact 
, alors ,
1°) je ne sais meme pas comment on procede pour demarrer en veille un autre OS que celui qu ' on vient de mettre en veille .
2°) Pour les autres OS , avec LM , exactement le meme resultat , demarrage impec et en sortie de veille meme erreur COMRESET X 2 .
Veux tu que je teste aussi sou U18.04 ?
Dernière modification par iznobe (Le 20/01/2022, à 18:34)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#18 Le 20/01/2022, à 18:57
- inbox
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Tu peux essayer.
J'arrive au bout de mes connaissances... 
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#19 Le 20/01/2022, à 19:57
- iznobe
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
bon et bien meme constat :
apres demarrage pas d ' erreur , apres mise en veille et reveil :
jeu. janv. 20 19:55:15 iznobe@iznobe-PC:~$ sudo dmesg | grep COMRESET
[sudo] Mot de passe de iznobe :
[ 166.041969] ata1: COMRESET failed (errno=-16)
[ 166.113965] ata2: COMRESET failed (errno=-16)
jeu. janv. 20 19:55:30 iznobe@iznobe-PC:~$ sudo dmesg | grep ata
[ 0.000000] BIOS-e820: [mem 0x000000006ed9d000-0x000000006eeccfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000040400000-0x000000006831f017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006831f018-0x000000006832c857] usable
[ 0.000000] reserve setup_data: [mem 0x000000006832c858-0x000000006832d017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006832d018-0x000000006834aa57] usable
[ 0.000000] reserve setup_data: [mem 0x000000006834aa58-0x000000006acacfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006acad000-0x000000006acadfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006acae000-0x000000006accefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006accf000-0x000000006accffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006acd0000-0x000000006e59cfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006e59d000-0x000000006ed9cfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006ed9d000-0x000000006eeccfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000006eecd000-0x000000006f143fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006f144000-0x000000006fffdfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006fffe000-0x000000006fffefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000007d7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000008807fffff] usable
[ 0.015651] ACPI: UEFI 0x000000006EF4C000 00063A (v01 INTEL RstSataE 00000000 ?? 00000000)
[ 0.015654] ACPI: UEFI 0x000000006EF4B000 00005C (v01 INTEL RstSataV 00000000 ?? 00000000)
[ 0.129627] Memory: 32492488K/33268968K available (16393K kernel code, 3481K rwdata, 10004K rodata, 2672K init, 5984K bss, 776220K reserved, 0K cma-reserved)
[ 0.369738] libata version 3.00 loaded.
[ 1.270936] Write protecting the kernel read-only data: 28672k
[ 1.272840] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 1.274137] Freeing unused kernel image (rodata/data gap) memory: 236K
[ 1.418945] ata1: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02100 irq 123
[ 1.419968] ata2: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02180 irq 123
[ 1.421066] ata3: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02200 irq 123
[ 1.422233] ata4: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02280 irq 123
[ 1.423407] ata5: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02300 irq 123
[ 1.424552] ata6: SATA max UDMA/133 abar m2048@0x7db02000 port 0x7db02380 irq 123
[ 1.737959] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.738411] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.740680] ata1.00: ATA-10: ST4000VX000-2AG166, CV11, max UDMA/133
[ 1.741153] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.741926] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.742421] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.742923] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.743428] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.744368] ata3.00: ATA-8: TOSHIBA HDWD130, MX6OACF0, max UDMA/133
[ 1.744851] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.745344] ata1.00: configured for UDMA/133
[ 1.745833] ata6.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
[ 1.746370] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 1.747795] ata3.00: configured for UDMA/133
[ 1.748529] ata2.00: ATA-9: WDC WD82PURZ-85TEUY0, 82.00A82, max UDMA/133
[ 1.749596] ata2.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.750993] ata6.00: configured for UDMA/133
[ 1.759457] ata2.00: configured for UDMA/133
[ 2.373457] EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Opts: (null)
[ 4.244330] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.301365] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
[ 156.380551] ata5: SATA link down (SStatus 4 SControl 300)
[ 156.380640] ata4: SATA link down (SStatus 4 SControl 300)
[ 161.417938] ata2: link is slow to respond, please be patient (ready=0)
[ 161.417947] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 161.417952] ata3: link is slow to respond, please be patient (ready=0)
[ 161.417975] ata1: link is slow to respond, please be patient (ready=0)
[ 161.440979] ata6.00: configured for UDMA/133
[ 164.057989] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 164.060948] ata3.00: configured for UDMA/133
[ 166.041969] ata1: COMRESET failed (errno=-16)
[ 166.113965] ata2: COMRESET failed (errno=-16)
[ 166.357257] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 166.361140] ata1.00: configured for UDMA/133
[ 170.329926] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 170.726105] ata2.00: configured for UDMA/133
jeu. janv. 20 19:55:44 iznobe@iznobe-PC:~$ retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#20 Le 20/01/2022, à 20:03
- xubu1957
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
Je vois ce message
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#21 Le 20/01/2022, à 20:19
- iznobe
Re : ataX: COMRESET failed (errno=-16) apres mise en veille ,que faire ?
@xubu , merci pour le lien , j' etais deja tombé dessus au debut de mes recherches , avant de poster ici , du coup on ne sait pas si le probleme a vraiment été resolu ou pas avec la connectique .
Il y a beaucoup de posts sur le net qui parle de cette erreur , mais vraiment peu a en tirer ... rien de clair ni de vraiment resolu .
De plus peu des liens que j ' ai pu lire , parle de ce soucis apres la mise en veille ....
Apres comme je le disais , je ne remarque plus de problemes liés a mes disques lors de l' utilisation de mon ordi , je vais donc laissé tranquillement en attente . des fois que quelqu 'un trouve une solution ou des indices / pistes a explorer .
En tout cas merci a vous pour votre aide 
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne