#1 Le 27/01/2022, à 13:33
- Orbital_Verbose
[Carte son perdue] Boulet avec tournevis
Bonjour,
Je vais vous passer les détail sur comment j'en suis arrivé là... Toujours est-il que j'ai démonté mon PC portable ACER swift 3 N19H4 pour voir si je ne pouvais pas ajouter de la RAM dans la machine. La RAM étant soudée (boulet aurait pu lire cette info sur internet) j'ai remonté la machine.
Et là, surprise : plus de carte son. Elle n'existe plus 
Même sous Windows, pas moyen de remettre la main dessus.
J'ai rouvert, revérifié les branchement (peut-être même un truc pas branché du tout... mais tout est à son emplacement. Et toujours pas de carte son....
En désespoir de cause, je me tourne vers vous pour savoir si vous n'auriez pas une idée d'où peut provenir le problème.
Cordialement
Orbital
Si ça intéresse, un roman que j'écris et qui est lisible gratuitement sur le net : Le conflit du Multivers
Hors ligne
#2 Le 27/01/2022, à 13:43
- xubu1957
Re : [Carte son perdue] Boulet avec tournevis
Bonjour,
Essaye de montrer :
lspci | grep [Aa]udio && lsusb | grep [Aa]udioet :
cat /proc/asound/pcmConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#3 Le 27/01/2022, à 13:58
- Orbital_Verbose
Re : [Carte son perdue] Boulet avec tournevis
Bonjour Xubu,
voilà le premier :
orbital@StarFighter:~$ lspci | grep [Aa]udio && lsusb | grep [Aa]udio
00:1f.3 Multimedia audio controller: Intel Corporation Smart Sound Technology Audio Controller (rev 30)
orbital@StarFighter:~$ et voici le second :
orbital@StarFighter:~$ cat /proc/asound/pcm
00-01: HDMI1 (*) : : playback 1
00-02: HDMI2 (*) : : playback 1
00-03: HDMI3 (*) : : playback 1
00-06: DMIC (*) : : capture 1
00-07: DMIC16kHz (*) : : capture 1
orbital@StarFighter:~$ Si ça intéresse, un roman que j'écris et qui est lisible gratuitement sur le net : Le conflit du Multivers
Hors ligne
#4 Le 27/01/2022, à 14:20
- xubu1957
Re : [Carte son perdue] Boulet avec tournevis
Depuis un terminal, dont au préalable la fenêtre est élargie, afin de ne pas tronquer l'image, montre :
alsamixerVoir les exemples > du message #6
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#5 Le 27/01/2022, à 14:25
- Orbital_Verbose
Re : [Carte son perdue] Boulet avec tournevis
Si ça intéresse, un roman que j'écris et qui est lisible gratuitement sur le net : Le conflit du Multivers
Hors ligne
#6 Le 27/01/2022, à 14:33
- xubu1957
Re : [Carte son perdue] Boulet avec tournevis
Et avec F6, tu vois l'autre carte ?
Je préfère des retours avec les balises, car les sites d'images ne sont pas pérennes.
Dernière modification par xubu1957 (Le 27/01/2022, à 14:35)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#7 Le 27/01/2022, à 15:02
- MicP
Re : [Carte son perdue] Boulet avec tournevis
Bonjour
Je vois, sur l'image accessible par le lien donné dans le message #5, que le bluetooth est activé.
Est-ce que la sortie audio ne serait pas redirigé vers un périphérique bluetooth qui serait en ce moment avec le bouton de volume à 0 ou avec des haut-parleurs débranchés, ou connecté à un ampli audio arrêté, etc... ?
Quoi qu'il en soit, l'image montre bien qu'il y a au moins une carte son accessible à machine,
c'est celle qui est connectée par le port HDMI (<=> peut-être qu'il s'agit de celle qui est intégrée à ton écran externe)
Dernière modification par MicP (Le 27/01/2022, à 15:06)
Hors ligne
#8 Le 27/01/2022, à 15:33
- Orbital_Verbose
Re : [Carte son perdue] Boulet avec tournevis
@Xubu :
voici le lien =
@MicP : il n'y a rien de branché sur le bluetooth ou sur le HDMI. Je suis sur un PC portable. il est sur batterie et sans fils actuellement
Je me suis demandé si ça n'avait pas été désactivé dans le BIOS vu que ce dernier a complètement rebooté lorsque j'ai débranché la batterie (j'ai le remettre en configuration pour redémarrer ubuntu, notamment la désactivation de Acer Optane)
Mais j'ai rien trouvé jusqu'à présent...
Dernière modification par Orbital_Verbose (Le 27/01/2022, à 15:34)
Si ça intéresse, un roman que j'écris et qui est lisible gratuitement sur le net : Le conflit du Multivers
Hors ligne
#9 Le 27/01/2022, à 15:39
- FrancisFDZ
Re : [Carte son perdue] Boulet avec tournevis
Bonjour,
As-tu envisagé la possibilité que tu ais débranché malencontreusement (et bien sur involontairement) la carte son ?
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#10 Le 27/01/2022, à 15:43
- Orbital_Verbose
Re : [Carte son perdue] Boulet avec tournevis
Bonjour Francis,
Oui, Je l'ai envisagé. Et j'ai rouvert 4 fois le PC pour vérifier que je n'avais rien oublié de rebrancher... mais toutes les connectiques sont solides et ne se débranchent pas quand on tire dessus. Et aucun fils ou nappe pendouillante...
Je sens que je vais continuer à le retourner et ouvrir, mais je ne crois pas que cela vienne de là.
(Allez, je vais revérifier !)
Si ça intéresse, un roman que j'écris et qui est lisible gratuitement sur le net : Le conflit du Multivers
Hors ligne
#11 Le 27/01/2022, à 15:44
- MicP
Re : [Carte son perdue] Boulet avec tournevis
Essaye de voir dans les messages du noyau (sudo dmesg)
s'il n'y aurait pas quelque(s) ligne(s) concernant un problème de carte audio
ou/et un fichier firmware qui n'aurait pu être chargé.
Regarde aussi tout ce qui pourrait concerner une carte audio dans les options du BIOS et/ou EFI de ta machine.
Dernière modification par MicP (Le 27/01/2022, à 15:46)
Hors ligne
#12 Le 27/01/2022, à 16:17
- Orbital_Verbose
Re : [Carte son perdue] Boulet avec tournevis
MicP a écrit :
Essaye de voir dans les messages du noyau (sudo dmesg)
s'il n'y aurait pas quelque(s) ligne(s) concernant un problème de carte audio
ou/et un fichier firmware qui n'aurait pu être chargé.
voici le dmesg :
[ 0.007443] ACPI: Early table checksum verification disabled
[ 0.007446] ACPI: RSDP 0x000000006BC4E014 000024 (v02 ACRSYS)
[ 0.007449] ACPI: XSDT 0x000000006BC22188 00010C (v01 ACRSYS ACRPRDCT 00000002 01000013)
[ 0.007453] ACPI: FACP 0x000000006BC24000 00010C (v05 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007458] ACPI: DSDT 0x000000006BBE7000 039277 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007460] ACPI: FACS 0x000000006BB60000 000040
[ 0.007462] ACPI: UEFI 0x000000006BBCE000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.007464] ACPI: SSDT 0x000000006BC46000 006DEC (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.007467] ACPI: SSDT 0x000000006BC44000 001B60 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.007469] ACPI: SSDT 0x000000006BC40000 003389 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.007471] ACPI: SSDT 0x000000006BC39000 006860 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.007473] ACPI: SSDT 0x000000006BC38000 000781 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.007476] ACPI: TPM2 0x000000006BC37000 000034 (v04 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007478] ACPI: MSDM 0x000000006BC36000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.007480] ACPI: LPIT 0x000000006BC35000 000094 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007482] ACPI: WSMT 0x000000006BC34000 000028 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007485] ACPI: SSDT 0x000000006BC33000 000B70 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.007487] ACPI: DBGP 0x000000006BC32000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007489] ACPI: DBG2 0x000000006BC31000 000054 (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007491] ACPI: SSDT 0x000000006BC2F000 001748 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.007493] ACPI: SSDT 0x000000006BC29000 005DD2 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.007496] ACPI: SSDT 0x000000006BC28000 000B0C (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.007498] ACPI: NHLT 0x000000006BC26000 00179E (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007500] ACPI: ECDT 0x000000006BC25000 000069 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007502] ACPI: HPET 0x000000006BC23000 000038 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007504] ACPI: APIC 0x000000006BC4D000 00012C (v03 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007507] ACPI: MCFG 0x000000006BC21000 00003C (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007509] ACPI: SSDT 0x000000006BBE6000 000C0E (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007511] ACPI: SSDT 0x000000006BBE5000 000C71 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007513] ACPI: DMAR 0x000000006BBE4000 0000A8 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007515] ACPI: SSDT 0x000000006BBE3000 000DF3 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.007518] ACPI: SSDT 0x000000006BBE2000 000164 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.007520] ACPI: FPDT 0x000000006BBE1000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.007522] ACPI: BGRT 0x000000006BBE0000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.007524] ACPI: Reserving FACP table memory at [mem 0x6bc24000-0x6bc2410b]
[ 0.007525] ACPI: Reserving DSDT table memory at [mem 0x6bbe7000-0x6bc20276]
[ 0.007526] ACPI: Reserving FACS table memory at [mem 0x6bb60000-0x6bb6003f]
[ 0.007527] ACPI: Reserving UEFI table memory at [mem 0x6bbce000-0x6bbce235]
[ 0.007527] ACPI: Reserving SSDT table memory at [mem 0x6bc46000-0x6bc4cdeb]
[ 0.007528] ACPI: Reserving SSDT table memory at [mem 0x6bc44000-0x6bc45b5f]
[ 0.007529] ACPI: Reserving SSDT table memory at [mem 0x6bc40000-0x6bc43388]
[ 0.007529] ACPI: Reserving SSDT table memory at [mem 0x6bc39000-0x6bc3f85f]
[ 0.007530] ACPI: Reserving SSDT table memory at [mem 0x6bc38000-0x6bc38780]
[ 0.007531] ACPI: Reserving TPM2 table memory at [mem 0x6bc37000-0x6bc37033]
[ 0.007531] ACPI: Reserving MSDM table memory at [mem 0x6bc36000-0x6bc36054]
[ 0.007532] ACPI: Reserving LPIT table memory at [mem 0x6bc35000-0x6bc35093]
[ 0.007532] ACPI: Reserving WSMT table memory at [mem 0x6bc34000-0x6bc34027]
[ 0.007533] ACPI: Reserving SSDT table memory at [mem 0x6bc33000-0x6bc33b6f]
[ 0.007534] ACPI: Reserving DBGP table memory at [mem 0x6bc32000-0x6bc32033]
[ 0.007534] ACPI: Reserving DBG2 table memory at [mem 0x6bc31000-0x6bc31053]
[ 0.007535] ACPI: Reserving SSDT table memory at [mem 0x6bc2f000-0x6bc30747]
[ 0.007536] ACPI: Reserving SSDT table memory at [mem 0x6bc29000-0x6bc2edd1]
[ 0.007536] ACPI: Reserving SSDT table memory at [mem 0x6bc28000-0x6bc28b0b]
[ 0.007537] ACPI: Reserving NHLT table memory at [mem 0x6bc26000-0x6bc2779d]
[ 0.007538] ACPI: Reserving ECDT table memory at [mem 0x6bc25000-0x6bc25068]
[ 0.007538] ACPI: Reserving HPET table memory at [mem 0x6bc23000-0x6bc23037]
[ 0.007539] ACPI: Reserving APIC table memory at [mem 0x6bc4d000-0x6bc4d12b]
[ 0.007540] ACPI: Reserving MCFG table memory at [mem 0x6bc21000-0x6bc2103b]
[ 0.007540] ACPI: Reserving SSDT table memory at [mem 0x6bbe6000-0x6bbe6c0d]
[ 0.007541] ACPI: Reserving SSDT table memory at [mem 0x6bbe5000-0x6bbe5c70]
[ 0.007542] ACPI: Reserving DMAR table memory at [mem 0x6bbe4000-0x6bbe40a7]
[ 0.007542] ACPI: Reserving SSDT table memory at [mem 0x6bbe3000-0x6bbe3df2]
[ 0.007543] ACPI: Reserving SSDT table memory at [mem 0x6bbe2000-0x6bbe2163]
[ 0.007544] ACPI: Reserving FPDT table memory at [mem 0x6bbe1000-0x6bbe1043]
[ 0.007545] ACPI: Reserving BGRT table memory at [mem 0x6bbe0000-0x6bbe0037]
[ 0.007573] ACPI: Local APIC address 0xfee00000
[ 0.007818] No NUMA configuration found
[ 0.007819] Faking a node at [mem 0x0000000000000000-0x00000002827fffff]
[ 0.007824] NODE_DATA(0) allocated [mem 0x2827d6000-0x2827fffff]
[ 0.008003] Zone ranges:
[ 0.008004] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008005] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008007] Normal [mem 0x0000000100000000-0x00000002827fffff]
[ 0.008008] Device empty
[ 0.008009] Movable zone start for each node
[ 0.008011] Early memory node ranges
[ 0.008012] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.008013] node 0: [mem 0x0000000000100000-0x0000000067947fff]
[ 0.008014] node 0: [mem 0x0000000068248000-0x000000006a05efff]
[ 0.008014] node 0: [mem 0x000000006bc4f000-0x000000006bc4ffff]
[ 0.008015] node 0: [mem 0x0000000100000000-0x00000002827fffff]
[ 0.008016] Initmem setup node 0 [mem 0x0000000000001000-0x00000002827fffff]
[ 0.008017] On node 0 totalpages: 2014974
[ 0.008018] DMA zone: 64 pages used for memmap
[ 0.008019] DMA zone: 158 pages reserved
[ 0.008020] DMA zone: 3998 pages, LIFO batch:0
[ 0.008021] DMA32 zone: 6686 pages used for memmap
[ 0.008021] DMA32 zone: 427872 pages, LIFO batch:63
[ 0.008022] Normal zone: 24736 pages used for memmap
[ 0.008023] Normal zone: 1583104 pages, LIFO batch:63
[ 0.008024] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.008040] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.010029] On node 0, zone DMA32: 2304 pages in unavailable ranges
[ 0.010069] On node 0, zone DMA32: 7152 pages in unavailable ranges
[ 0.017583] On node 0, zone Normal: 17328 pages in unavailable ranges
[ 0.017710] On node 0, zone Normal: 22528 pages in unavailable ranges
[ 0.017761] Reserving Intel graphics memory at [mem 0x79800000-0x7d7fffff]
[ 0.018206] ACPI: PM-Timer IO Port: 0x1808
[ 0.018207] ACPI: Local APIC address 0xfee00000
[ 0.018212] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.018214] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.018214] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.018215] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.018216] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.018216] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.018217] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.018217] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.018218] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.018218] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.018219] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.018219] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.018220] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.018220] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.018221] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.018222] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.018269] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.018271] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.018272] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.018274] ACPI: IRQ0 used by override.
[ 0.018275] ACPI: IRQ9 used by override.
[ 0.018276] Using ACPI (MADT) for SMP configuration information
[ 0.018277] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.018282] e820: update [mem 0x64b90000-0x64c83fff] usable ==> reserved
[ 0.018289] TSC deadline timer available
[ 0.018289] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.018302] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.018304] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.018305] PM: hibernation: Registered nosave memory: [mem 0x64b2f000-0x64b2ffff]
[ 0.018306] PM: hibernation: Registered nosave memory: [mem 0x64b90000-0x64c83fff]
[ 0.018308] PM: hibernation: Registered nosave memory: [mem 0x67948000-0x68247fff]
[ 0.018309] PM: hibernation: Registered nosave memory: [mem 0x6a05f000-0x6b4defff]
[ 0.018309] PM: hibernation: Registered nosave memory: [mem 0x6b4df000-0x6bbcefff]
[ 0.018310] PM: hibernation: Registered nosave memory: [mem 0x6bbcf000-0x6bc4efff]
[ 0.018311] PM: hibernation: Registered nosave memory: [mem 0x6bc50000-0xcfffffff]
[ 0.018312] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfc7fffff]
[ 0.018312] PM: hibernation: Registered nosave memory: [mem 0xfc800000-0xfe7fffff]
[ 0.018313] PM: hibernation: Registered nosave memory: [mem 0xfe800000-0xfecfffff]
[ 0.018313] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.018314] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[ 0.018314] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed17fff]
[ 0.018315] PM: hibernation: Registered nosave memory: [mem 0xfed18000-0xfed1ffff]
[ 0.018315] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[ 0.018316] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed9ffff]
[ 0.018316] PM: hibernation: Registered nosave memory: [mem 0xfeda0000-0xfeda1fff]
[ 0.018317] PM: hibernation: Registered nosave memory: [mem 0xfeda2000-0xfedfffff]
[ 0.018318] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.018318] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff5fffff]
[ 0.018319] PM: hibernation: Registered nosave memory: [mem 0xff600000-0xffffffff]
[ 0.018320] [mem 0xd0000000-0xfc7fffff] available for PCI devices
[ 0.018321] Booting paravirtualized kernel on bare hardware
[ 0.018323] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.018328] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.018474] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144
[ 0.018478] pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152
[ 0.018480] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.018500] Built 1 zonelists, mobility grouping on. Total pages: 1983330
[ 0.018501] Policy zone: Normal
[ 0.018502] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.13.0-27-generic root=UUID=b7a840ad-34bc-406c-8a84-f5a8714d98d3 ro quiet splash vt.handoff=7
[ 0.018884] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.019051] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.019104] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.034160] Memory: 7681468K/8059896K available (16393K kernel code, 3511K rwdata, 10488K rodata, 2864K init, 5764K bss, 378168K reserved, 0K cma-reserved)
[ 0.034164] random: get_random_u64 called from __kmem_cache_create+0x2d/0x440 with crng_init=1
[ 0.034235] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.034244] ftrace: allocating 49224 entries in 193 pages
[ 0.046397] ftrace: allocated 193 pages with 3 groups
[ 0.046481] rcu: Hierarchical RCU implementation.
[ 0.046482] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.046483] Rude variant of Tasks RCU enabled.
[ 0.046484] Tracing variant of Tasks RCU enabled.
[ 0.046484] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.046485] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.049159] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.049583] random: crng done (trusting CPU's manufacturer)
[ 0.049600] vt handoff: transparent VT on vt#7
[ 0.049605] Console: colour dummy device 80x25
[ 0.049616] printk: console [tty0] enabled
[ 0.049627] ACPI: Core revision 20210331
[ 0.049829] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.049831] APIC: Switch to symmetric I/O mode setup
[ 0.049832] DMAR: Host address width 39
[ 0.049833] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.049839] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 49e2ff0505e
[ 0.049841] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.049846] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.049848] DMAR: RMRR base: 0x0000006b2e2000 end: 0x0000006b301fff
[ 0.049849] DMAR: RMRR base: 0x00000079000000 end: 0x0000007d7fffff
[ 0.049851] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.049852] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.049853] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.049853] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.051416] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.051417] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.055813] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x159647815e3, max_idle_ns: 440795269835 ns
[ 0.055819] Calibrating delay loop (skipped), value calculated using timer frequency.. 2995.20 BogoMIPS (lpj=5990400)
[ 0.055821] pid_max: default: 32768 minimum: 301
[ 0.058062] LSM: Security Framework initializing
[ 0.058072] Yama: becoming mindful.
[ 0.058095] AppArmor: AppArmor initialized
[ 0.058118] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.058128] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.058319] CPU0: Thermal monitoring enabled (TM1)
[ 0.058321] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.058375] process: using mwait in idle threads
[ 0.058376] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.058377] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.058381] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.058383] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.058383] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.058384] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.058385] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.059816] Freeing SMP alternatives memory: 40K
[ 0.059816] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 2389
[ 0.059816] smpboot: CPU0: Intel(R) Core(TM) i7-1065G7 CPU @ 1.30GHz (family: 0x6, model: 0x7e, stepping: 0x5)
[ 0.059816] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.059816] ... version: 5
[ 0.059816] ... bit width: 48
[ 0.059816] ... generic registers: 8
[ 0.059816] ... value mask: 0000ffffffffffff
[ 0.059816] ... max period: 00007fffffffffff
[ 0.059816] ... fixed-purpose events: 4
[ 0.059816] ... event mask: 0001000f000000ff
[ 0.059816] rcu: Hierarchical SRCU implementation.
[ 0.059816] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.059816] smp: Bringing up secondary CPUs ...
[ 0.059816] x86: Booting SMP configuration:
[ 0.059816] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.065021] smp: Brought up 1 node, 8 CPUs
[ 0.065021] smpboot: Max logical packages: 1
[ 0.065021] smpboot: Total of 8 processors activated (23961.60 BogoMIPS)
[ 0.068059] devtmpfs: initialized
[ 0.068059] x86/mm: Memory block size: 128MB
[ 0.068203] PM: Registering ACPI NVS region [mem 0x6b4df000-0x6bbcefff] (7274496 bytes)
[ 0.068203] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.068203] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.068203] pinctrl core: initialized pinctrl subsystem
[ 0.068203] PM: RTC time: 00:04:24, date: 2019-01-01
[ 0.068287] NET: Registered protocol family 16
[ 0.068406] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.068467] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.068525] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.068529] audit: initializing netlink subsys (disabled)
[ 0.068534] audit: type=2000 audit(1546301064.012:1): state=initialized audit_enabled=0 res=1
[ 0.068534] thermal_sys: Registered thermal governor 'fair_share'
[ 0.068534] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.068534] thermal_sys: Registered thermal governor 'step_wise'
[ 0.068534] thermal_sys: Registered thermal governor 'user_space'
[ 0.068534] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.068534] EISA bus registered
[ 0.068534] cpuidle: using governor ladder
[ 0.068534] cpuidle: using governor menu
[ 0.068534] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.068534] ACPI: bus type PCI registered
[ 0.068534] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.068534] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 0.068534] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[ 0.068534] PCI: Using configuration type 1 for base access
[ 0.068534] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.068562] Kprobes globally optimized
[ 0.068565] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.068565] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.068565] ACPI: Added _OSI(Module Device)
[ 0.068565] ACPI: Added _OSI(Processor Device)
[ 0.068565] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.068565] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.068565] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.068565] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.068565] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.119075] ACPI: 14 ACPI AML tables successfully acquired and loaded
[ 0.120209] ACPI: EC: EC started
[ 0.120210] ACPI: EC: interrupt blocked
[ 0.121161] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.121162] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.126773] ACPI: Dynamic OEM Table Load:
[ 0.126783] ACPI: SSDT 0xFFFF9A3640FEA800 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160422)
[ 0.127486] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.128813] ACPI: Dynamic OEM Table Load:
[ 0.128819] ACPI: SSDT 0xFFFF9A3641100800 000386 (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.129593] ACPI: Dynamic OEM Table Load:
[ 0.129598] ACPI: SSDT 0xFFFF9A3641436800 000437 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.130418] ACPI: Dynamic OEM Table Load:
[ 0.130422] ACPI: SSDT 0xFFFF9A364142CE00 00012C (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
[ 0.131128] ACPI: Dynamic OEM Table Load:
[ 0.131133] ACPI: SSDT 0xFFFF9A3641433000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160422)
[ 0.132055] ACPI: Dynamic OEM Table Load:
[ 0.132060] ACPI: SSDT 0xFFFF9A3641433800 0005FC (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.132905] ACPI: Dynamic OEM Table Load:
[ 0.132909] ACPI: SSDT 0xFFFF9A3641100400 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.133746] ACPI: Dynamic OEM Table Load:
[ 0.133751] ACPI: SSDT 0xFFFF9A364143B000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160422)
[ 0.135013] ACPI: Dynamic OEM Table Load:
[ 0.135018] ACPI: SSDT 0xFFFF9A3641104400 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.138457] ACPI: Interpreter enabled
[ 0.138494] ACPI: (supports S0 S3 S4 S5)
[ 0.138495] ACPI: Using IOAPIC for interrupt routing
[ 0.138524] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.139512] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.143241] ACPI: PM: Power Resource [PAUD] (on)
[ 0.146428] ACPI: PM: Power Resource [PCRP] (on)
[ 0.146455] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.DGPV], AE_NOT_FOUND (20210331/psargs-330)
[ 0.146461] No Local Variables are initialized for Method [_ON_]
[ 0.146462] No Arguments are initialized for method [_ON_]
[ 0.146464] ACPI Error: Aborting method \_SB.PCI0.RP05.PCRP._ON due to previous error (AE_NOT_FOUND) (20210331/psparse-529)
[ 0.151218] ACPI: PM: Power Resource [V0PR] (on)
[ 0.151360] ACPI: PM: Power Resource [V1PR] (on)
[ 0.151496] ACPI: PM: Power Resource [V2PR] (on)
[ 0.154402] ACPI: PM: Power Resource [WRST] (on)
[ 0.155206] ACPI: PM: Power Resource [TBT0] (on)
[ 0.155223] ACPI: PM: Power Resource [TBT1] (on)
[ 0.155239] ACPI: PM: Power Resource [D3C] (on)
[ 0.279464] ACPI: PM: Power Resource [FN00] (off)
[ 0.279576] ACPI: PM: Power Resource [FN01] (off)
[ 0.279684] ACPI: PM: Power Resource [FN02] (off)
[ 0.279792] ACPI: PM: Power Resource [FN03] (off)
[ 0.279898] ACPI: PM: Power Resource [FN04] (off)
[ 0.280473] ACPI: PM: Power Resource [PIN] (off)
[ 0.281079] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.281087] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.283466] acpi PNP0A08:00: _OSC: platform does not support [AER]
[ 0.286787] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
[ 0.286788] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.290365] PCI host bridge to bus 0000:00
[ 0.290367] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.290369] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.290370] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.290370] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.290371] pci_bus 0000:00: root bus resource [mem 0x7d800000-0xbfffffff window]
[ 0.290372] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[ 0.290430] pci 0000:00:00.0: [8086:8a12] type 00 class 0x060000
[ 0.291779] pci 0000:00:02.0: [8086:8a52] type 00 class 0x030000
[ 0.291788] pci 0000:00:02.0: reg 0x10: [mem 0x601c000000-0x601cffffff 64bit]
[ 0.291794] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[ 0.291797] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.291813] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.291814] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[ 0.292855] pci 0000:00:04.0: [8086:8a03] type 00 class 0x118000
[ 0.292875] pci 0000:00:04.0: reg 0x10: [mem 0x601d150000-0x601d15ffff 64bit]
[ 0.294034] pci 0000:00:07.0: [8086:8a1d] type 01 class 0x060400
[ 0.294989] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.295008] pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid
[ 0.295481] pci 0000:00:08.0: [8086:8a11] type 00 class 0x088000
[ 0.295489] pci 0000:00:08.0: reg 0x10: [mem 0x601d172000-0x601d172fff 64bit]
[ 0.296496] pci 0000:00:0d.0: [8086:8a13] type 00 class 0x0c0330
[ 0.296508] pci 0000:00:0d.0: reg 0x10: [mem 0x601d140000-0x601d14ffff 64bit]
[ 0.296557] pci 0000:00:0d.0: PME# supported from D3hot D3cold
[ 0.297715] pci 0000:00:0d.2: [8086:8a17] type 00 class 0x088000
[ 0.297725] pci 0000:00:0d.2: reg 0x10: [mem 0x601d100000-0x601d13ffff 64bit]
[ 0.297732] pci 0000:00:0d.2: reg 0x18: [mem 0x601d171000-0x601d171fff 64bit]
[ 0.297765] pci 0000:00:0d.2: supports D1 D2
[ 0.297765] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.298805] pci 0000:00:14.0: [8086:34ed] type 00 class 0x0c0330
[ 0.298828] pci 0000:00:14.0: reg 0x10: [mem 0x8a300000-0x8a30ffff 64bit]
[ 0.298923] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.300097] pci 0000:00:14.2: [8086:34ef] type 00 class 0x050000
[ 0.300125] pci 0000:00:14.2: reg 0x10: [mem 0x601d168000-0x601d169fff 64bit]
[ 0.300142] pci 0000:00:14.2: reg 0x18: [mem 0x601d170000-0x601d170fff 64bit]
[ 0.301205] pci 0000:00:14.3: [8086:34f0] type 00 class 0x028000
[ 0.301245] pci 0000:00:14.3: reg 0x10: [mem 0x601d164000-0x601d167fff 64bit]
[ 0.301394] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[ 0.302434] pci 0000:00:15.0: [8086:34e8] type 00 class 0x0c8000
[ 0.302494] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.303764] pci 0000:00:15.1: [8086:34e9] type 00 class 0x0c8000
[ 0.303858] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.305089] pci 0000:00:16.0: [8086:34e0] type 00 class 0x078000
[ 0.305117] pci 0000:00:16.0: reg 0x10: [mem 0x601d16d000-0x601d16dfff 64bit]
[ 0.305227] pci 0000:00:16.0: PME# supported from D3hot
[ 0.306505] pci 0000:00:1d.0: [8086:34b4] type 01 class 0x060400
[ 0.306635] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.306678] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[ 0.308054] pci 0000:00:1e.0: [8086:34a8] type 00 class 0x078000
[ 0.308112] pci 0000:00:1e.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.309429] pci 0000:00:1e.2: [8086:34aa] type 00 class 0x0c8000
[ 0.309489] pci 0000:00:1e.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.310711] pci 0000:00:1f.0: [8086:3482] type 00 class 0x060100
[ 0.311924] pci 0000:00:1f.3: [8086:34c8] type 00 class 0x040100
[ 0.311967] pci 0000:00:1f.3: reg 0x10: [mem 0x601d160000-0x601d163fff 64bit]
[ 0.312017] pci 0000:00:1f.3: reg 0x20: [mem 0x601d000000-0x601d0fffff 64bit]
[ 0.312125] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.313568] pci 0000:00:1f.4: [8086:34a3] type 00 class 0x0c0500
[ 0.313605] pci 0000:00:1f.4: reg 0x10: [mem 0x601d16a000-0x601d16a0ff 64bit]
[ 0.313638] pci 0000:00:1f.4: reg 0x20: [io 0x3040-0x305f]
[ 0.314756] pci 0000:00:1f.5: [8086:34a4] type 00 class 0x0c8000
[ 0.314779] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.315835] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
[ 0.315838] pci 0000:00:07.0: bridge window [mem 0x7e000000-0x8a1fffff]
[ 0.315842] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref]
[ 0.315986] pci 0000:2b:00.0: [2646:5008] type 00 class 0x010802
[ 0.316011] pci 0000:2b:00.0: reg 0x10: [mem 0x8a200000-0x8a203fff 64bit]
[ 0.327996] pci 0000:00:1d.0: PCI bridge to [bus 2b]
[ 0.328001] pci 0000:00:1d.0: bridge window [mem 0x8a200000-0x8a2fffff]
[ 0.340118] acpi LNXPOWER:0e: Turning OFF
[ 0.340122] acpi LNXPOWER:05: Turning OFF
[ 0.340187] ACPI: EC: interrupt unblocked
[ 0.340188] ACPI: EC: event unblocked
[ 0.340206] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.340207] ACPI: EC: GPE=0x6e
[ 0.340208] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot ECDT EC initialization complete
[ 0.340209] ACPI: \_SB_.PCI0.LPCB.H_EC: EC: Used to handle transactions and events
[ 0.340260] iommu: Default domain type: Translated
[ 0.340260] SCSI subsystem initialized
[ 0.340260] libata version 3.00 loaded.
[ 0.340260] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.340260] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.340260] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.340260] vgaarb: loaded
[ 0.340260] ACPI: bus type USB registered
[ 0.340260] usbcore: registered new interface driver usbfs
[ 0.340260] usbcore: registered new interface driver hub
[ 0.340260] usbcore: registered new device driver usb
[ 0.340260] pps_core: LinuxPPS API ver. 1 registered
[ 0.340260] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.340260] PTP clock support registered
[ 0.340260] EDAC MC: Ver: 3.0.0
[ 0.340260] Registered efivars operations
[ 0.340260] NetLabel: Initializing
[ 0.340260] NetLabel: domain hash size = 128
[ 0.340260] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.340260] NetLabel: unlabeled traffic allowed by default
[ 0.340260] PCI: Using ACPI for IRQ routing
[ 0.358208] PCI: pci_cache_line_size set to 64 bytes
[ 0.358401] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[ 0.358589] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.358591] e820: reserve RAM buffer [mem 0x64b2f000-0x67ffffff]
[ 0.358591] e820: reserve RAM buffer [mem 0x64b90000-0x67ffffff]
[ 0.358592] e820: reserve RAM buffer [mem 0x67948000-0x67ffffff]
[ 0.358593] e820: reserve RAM buffer [mem 0x6a05f000-0x6bffffff]
[ 0.358593] e820: reserve RAM buffer [mem 0x6bc50000-0x6bffffff]
[ 0.358594] e820: reserve RAM buffer [mem 0x282800000-0x283ffffff]
[ 0.358597] clocksource: Switched to clocksource tsc-early
[ 0.360274] VFS: Disk quotas dquot_6.6.0
[ 0.360274] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.360274] AppArmor: AppArmor Filesystem Enabled
[ 0.360274] pnp: PnP ACPI init
[ 0.360274] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.360274] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.360274] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.360274] system 00:01: [io 0x1854-0x1857] has been reserved
[ 0.360274] system 00:01: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.360274] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.360274] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.360274] system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved
[ 0.360274] system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved
[ 0.360274] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
[ 0.360274] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
[ 0.360274] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.360274] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.360274] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.360274] system 00:04: [io 0x1800-0x18fe] could not be reserved
[ 0.360274] system 00:04: [mem 0xfd000000-0xfd68ffff] has been reserved
[ 0.360274] system 00:04: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[ 0.360274] system 00:04: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.360274] system 00:04: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 0.360274] system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.360274] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.360274] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.360274] system 00:05: [io 0x2000-0x20fe] has been reserved
[ 0.360274] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.360274] system 00:06: [mem 0xfe038000-0xfe038fff] has been reserved
[ 0.360274] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.360274] pnp: PnP ACPI: found 7 devices
[ 0.368810] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.368850] NET: Registered protocol family 2
[ 0.368923] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.369545] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.369581] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.369683] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.369724] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.369772] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.369792] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.369807] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.369835] NET: Registered protocol family 1
[ 0.369839] NET: Registered protocol family 44
[ 0.369843] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
[ 0.369850] pci 0000:00:07.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.369852] pci 0000:00:15.0: BAR 0: assigned [mem 0x4010000000-0x4010000fff 64bit]
[ 0.369914] pci 0000:00:15.1: BAR 0: assigned [mem 0x4010001000-0x4010001fff 64bit]
[ 0.369962] pci 0000:00:1e.0: BAR 0: assigned [mem 0x4010002000-0x4010002fff 64bit]
[ 0.370009] pci 0000:00:1e.2: BAR 0: assigned [mem 0x4010003000-0x4010003fff 64bit]
[ 0.370058] pci 0000:00:1f.5: BAR 0: no space for [mem size 0x00001000]
[ 0.370059] pci 0000:00:1f.5: BAR 0: trying firmware assignment [mem 0xfe010000-0xfe010fff]
[ 0.370060] pci 0000:00:1f.5: BAR 0: [mem 0xfe010000-0xfe010fff] conflicts with Reserved [mem 0xfc800000-0xfe7fffff]
[ 0.370061] pci 0000:00:1f.5: BAR 0: failed to assign [mem size 0x00001000]
[ 0.370063] pci 0000:00:15.0: BAR 0: assigned [mem 0x4010000000-0x4010000fff 64bit]
[ 0.370124] pci 0000:00:15.1: BAR 0: assigned [mem 0x4010001000-0x4010001fff 64bit]
[ 0.370139] pci 0000:00:1e.0: BAR 0: assigned [mem 0x4010002000-0x4010002fff 64bit]
[ 0.370187] pci 0000:00:1e.2: BAR 0: assigned [mem 0x4010003000-0x4010003fff 64bit]
[ 0.370201] pci 0000:00:1f.5: BAR 0: no space for [mem size 0x00001000]
[ 0.370202] pci 0000:00:1f.5: BAR 0: trying firmware assignment [mem 0xfe010000-0xfe010fff]
[ 0.370203] pci 0000:00:1f.5: BAR 0: [mem 0xfe010000-0xfe010fff] conflicts with Reserved [mem 0xfc800000-0xfe7fffff]
[ 0.370204] pci 0000:00:1f.5: BAR 0: failed to assign [mem size 0x00001000]
[ 0.370205] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
[ 0.370207] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
[ 0.370210] pci 0000:00:07.0: bridge window [mem 0x7e000000-0x8a1fffff]
[ 0.370212] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref]
[ 0.370216] pci 0000:00:1d.0: PCI bridge to [bus 2b]
[ 0.370234] pci 0000:00:1d.0: bridge window [mem 0x8a200000-0x8a2fffff]
[ 0.370242] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[ 0.370243] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.370244] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.370245] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.370246] pci_bus 0000:00: resource 7 [mem 0x7d800000-0xbfffffff window]
[ 0.370246] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[ 0.370247] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.370248] pci_bus 0000:01: resource 1 [mem 0x7e000000-0x8a1fffff]
[ 0.370249] pci_bus 0000:01: resource 2 [mem 0x6000000000-0x601bffffff 64bit pref]
[ 0.370250] pci_bus 0000:2b: resource 1 [mem 0x8a200000-0x8a2fffff]
[ 0.370371] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.372259] PCI: CLS 64 bytes, default 64
[ 0.372266] DMAR: Intel-IOMMU force enabled due to platform opt in
[ 0.372275] DMAR: No ATSR found
[ 0.372275] DMAR: No SATC found
[ 0.372279] DMAR: IOMMU feature fl1gp_support inconsistent
[ 0.372280] DMAR: IOMMU feature pgsel_inv inconsistent
[ 0.372280] DMAR: IOMMU feature nwfs inconsistent
[ 0.372281] DMAR: IOMMU feature pds inconsistent
[ 0.372281] DMAR: IOMMU feature eafs inconsistent
[ 0.372282] DMAR: IOMMU feature prs inconsistent
[ 0.372282] DMAR: IOMMU feature nest inconsistent
[ 0.372283] DMAR: IOMMU feature mts inconsistent
[ 0.372283] DMAR: IOMMU feature sc_support inconsistent
[ 0.372283] DMAR: IOMMU feature dev_iotlb_support inconsistent
[ 0.372284] DMAR: dmar0: Using Queued invalidation
[ 0.372287] DMAR: dmar1: Using Queued invalidation
[ 0.372353] Trying to unpack rootfs image as initramfs...
[ 0.372460] pci 0000:00:00.0: Adding to iommu group 0
[ 0.372467] pci 0000:00:02.0: Adding to iommu group 1
[ 0.372473] pci 0000:00:04.0: Adding to iommu group 2
[ 0.372480] pci 0000:00:07.0: Adding to iommu group 3
[ 0.372486] pci 0000:00:08.0: Adding to iommu group 4
[ 0.372495] pci 0000:00:0d.0: Adding to iommu group 5
[ 0.372501] pci 0000:00:0d.2: Adding to iommu group 5
[ 0.372509] pci 0000:00:14.0: Adding to iommu group 6
[ 0.372515] pci 0000:00:14.2: Adding to iommu group 6
[ 0.372521] pci 0000:00:14.3: Adding to iommu group 7
[ 0.372539] pci 0000:00:15.0: Adding to iommu group 8
[ 0.372545] pci 0000:00:15.1: Adding to iommu group 8
[ 0.372552] pci 0000:00:16.0: Adding to iommu group 9
[ 0.372574] pci 0000:00:1d.0: Adding to iommu group 10
[ 0.372584] pci 0000:00:1e.0: Adding to iommu group 11
[ 0.372590] pci 0000:00:1e.2: Adding to iommu group 11
[ 0.372612] pci 0000:00:1f.0: Adding to iommu group 12
[ 0.372618] pci 0000:00:1f.3: Adding to iommu group 12
[ 0.372624] pci 0000:00:1f.4: Adding to iommu group 12
[ 0.372630] pci 0000:00:1f.5: Adding to iommu group 12
[ 0.372653] pci 0000:2b:00.0: Adding to iommu group 13
[ 0.372701] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.372702] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.372702] software IO TLB: mapped [mem 0x00000000601bc000-0x00000000641bc000] (64MB)
[ 0.372886] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159647815e3, max_idle_ns: 440795269835 ns
[ 0.372900] clocksource: Switched to clocksource tsc
[ 0.372915] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.372944] sgx: EPC section 0x700c0000-0x75d7ffff
[ 0.373533] Initialise system trusted keyrings
[ 0.373542] Key type blacklist registered
[ 0.373562] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.374198] zbud: loaded
[ 0.374348] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.374443] fuse: init (API version 7.34)
[ 0.374531] integrity: Platform Keyring initialized
[ 0.382299] Key type asymmetric registered
[ 0.382301] Asymmetric key parser 'x509' registered
[ 0.382307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.382330] io scheduler mq-deadline registered
[ 0.382643] pcieport 0000:00:07.0: PME: Signaling with IRQ 122
[ 0.382661] pcieport 0000:00:07.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.382944] pcieport 0000:00:1d.0: PME: Signaling with IRQ 123
[ 0.383062] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.383099] efifb: probing for efifb
[ 0.383112] efifb: showing boot graphics
[ 0.384581] efifb: framebuffer at 0x4000000000, using 8100k, total 8100k
[ 0.384582] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.384583] efifb: scrolling: redraw
[ 0.384583] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.384641] fbcon: Deferring console take-over
[ 0.384641] fb0: EFI VGA frame buffer device
[ 0.384835] Monitor-Mwait will be used to enter C-1 state
[ 0.384838] Monitor-Mwait will be used to enter C-2 state
[ 0.384839] Monitor-Mwait will be used to enter C-3 state
[ 0.384841] ACPI: \_SB_.PR00: Found 3 idle states
[ 0.385232] ACPI: AC: AC Adapter [ADP1] (off-line)
[ 0.385280] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/PNP0C09:00/PNP0C0D:00/input/input0
[ 0.385294] ACPI: button: Lid Switch [LID0]
[ 0.385322] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.385343] ACPI: button: Power Button [PWRB]
[ 0.385361] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.385372] ACPI: button: Sleep Button [SLPB]
[ 0.385670] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 2389
[ 0.387623] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.387624] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.387888] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.389324] hpet_acpi_add: no address or irqs in _CRS
[ 0.389354] Linux agpgart interface v0.103
[ 0.458965] Freeing initrd memory: 58080K
[ 0.616007] loop: module loaded
[ 0.616583] libphy: Fixed MDIO Bus: probed
[ 0.616604] tun: Universal TUN/TAP device driver, 1.6
[ 0.616742] PPP generic driver version 2.4.2
[ 0.617035] VFIO - User Level meta-driver version: 0.3
[ 0.617262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.617271] ehci-pci: EHCI PCI platform driver
[ 0.617285] ehci-platform: EHCI generic platform driver
[ 0.617299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.617301] ohci-pci: OHCI PCI platform driver
[ 0.617317] ohci-platform: OHCI generic platform driver
[ 0.617327] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.617384] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.617388] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.618845] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.619113] mousedev: PS/2 mouse device common for all mice
[ 0.619342] rtc_cmos rtc_cmos: RTC can wake from S4
[ 0.620281] rtc_cmos rtc_cmos: registered as rtc0
[ 0.620518] rtc_cmos rtc_cmos: setting system clock to 2019-01-01T00:04:25 UTC (1546301065)
[ 0.620540] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[ 0.620549] i2c /dev entries driver
[ 0.621172] device-mapper: uevent: version 1.0.3
[ 0.621304] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 0.621330] platform eisa.0: Probing EISA bus 0
[ 0.621333] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.621336] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.621338] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.621339] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.621341] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.621342] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.621344] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.621346] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.621347] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.621349] platform eisa.0: EISA: Detected 0 cards
[ 0.621354] intel_pstate: Intel P-state driver initializing
[ 0.622632] intel_pstate: HWP enabled
[ 0.622725] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.622729] EFI Variables Facility v0.08 2004-May-17
[ 0.626564] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.665856] intel_pmc_core INT33A1:00: initialized
[ 0.665957] drop_monitor: Initializing network drop monitor service
[ 0.666058] NET: Registered protocol family 10
[ 0.671087] Segment Routing with IPv6
[ 0.671101] NET: Registered protocol family 17
[ 0.671132] Key type dns_resolver registered
[ 0.671614] microcode: sig=0x706e5, pf=0x80, revision=0xa6
[ 0.671655] microcode: Microcode Update Driver: v2.2.
[ 0.671658] IPI shorthand broadcast: enabled
[ 0.671664] sched_clock: Marking stable (665335230, 6317992)->(685654179, -14000957)
[ 0.671790] registered taskstats version 1
[ 0.671799] Loading compiled-in X.509 certificates
[ 0.672395] Loaded X.509 cert 'Build time autogenerated kernel key: a44c44071aa94830ca15ad3e535ec1ff53fed0ee'
[ 0.672800] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 0.673200] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 0.673201] blacklist: Loading compiled-in revocation X.509 certificates
[ 0.673211] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 0.673370] zswap: loaded using pool lzo/zbud
[ 0.673525] Key type ._fscrypt registered
[ 0.673526] Key type .fscrypt registered
[ 0.673527] Key type fscrypt-provisioning registered
[ 0.673651] Key type trusted registered
[ 0.675120] Key type encrypted registered
[ 0.675121] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.677502] integrity: Loading X.509 certificate: UEFI:db
[ 0.677534] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.677535] integrity: Loading X.509 certificate: UEFI:db
[ 0.677551] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.677552] integrity: Loading X.509 certificate: UEFI:db
[ 0.677560] integrity: Loaded X.509 cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5'
[ 0.677561] integrity: Loading X.509 certificate: UEFI:db
[ 0.677791] integrity: Loaded X.509 cert 'HQSecureFlash: b78a58299f3b8dbd4064615a6e85365a'
[ 0.679887] integrity: Revoking X.509 certificate: UEFI:dbx
[ 0.679913] blacklist: Revoked X.509 cert 'Acer Database Forbidden: 9de028a2638669f109745d3e2a7ad5c9e64ed392'
[ 0.679917] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[ 0.680064] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 0.680069] Loading compiled-in module X.509 certificates
[ 0.680510] Loaded X.509 cert 'Build time autogenerated kernel key: a44c44071aa94830ca15ad3e535ec1ff53fed0ee'
[ 0.680511] ima: Allocated hash algorithm: sha1
[ 0.695656] ima: No architecture policies found
[ 0.695680] evm: Initialising EVM extended attributes:
[ 0.695681] evm: security.selinux
[ 0.695682] evm: security.SMACK64
[ 0.695683] evm: security.SMACK64EXEC
[ 0.695684] evm: security.SMACK64TRANSMUTE
[ 0.695685] evm: security.SMACK64MMAP
[ 0.695685] evm: security.apparmor
[ 0.695686] evm: security.ima
[ 0.695687] evm: security.capability
[ 0.695688] evm: HMAC attrs: 0x1
[ 0.696152] PM: Magic number: 3:551:50
[ 0.696488] RAS: Correctable Errors collector initialized.
[ 0.753447] ACPI: battery: Slot [BAT0] (battery present)
[ 0.774406] Freeing unused decrypted memory: 2036K
[ 0.774728] Freeing unused kernel image (initmem) memory: 2864K
[ 0.774731] Write protecting the kernel read-only data: 30720k
[ 0.775238] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 0.775589] Freeing unused kernel image (rodata/data gap) memory: 1800K
[ 0.782983] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.782987] Run /init as init process
[ 0.782987] with arguments:
[ 0.782988] /init
[ 0.782989] splash
[ 0.782989] with environment:
[ 0.782990] HOME=/
[ 0.782990] TERM=linux
[ 0.782991] BOOT_IMAGE=/boot/vmlinuz-5.13.0-27-generic
[ 0.838694] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[ 0.838702] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
[ 0.839613] nvme nvme0: pci function 0000:2b:00.0
[ 0.840085] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000200009810
[ 0.840146] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 0.840187] hid: raw HID events driver (C) Jiri Kosina
[ 0.840346] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[ 0.840349] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
[ 0.840351] xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.840376] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 0.840377] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.840378] usb usb1: Product: xHCI Host Controller
[ 0.840379] usb usb1: Manufacturer: Linux 5.13.0-27-generic xhci-hcd
[ 0.840380] usb usb1: SerialNumber: 0000:00:0d.0
[ 0.840384] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 0.840485] hub 1-0:1.0: USB hub found
[ 0.840494] hub 1-0:1.0: 1 port detected
[ 0.840567] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
[ 0.840569] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.840570] usb usb2: Product: xHCI Host Controller
[ 0.840571] usb usb2: Manufacturer: Linux 5.13.0-27-generic xhci-hcd
[ 0.840572] usb usb2: SerialNumber: 0000:00:0d.0
[ 0.840625] hub 2-0:1.0: USB hub found
[ 0.840633] hub 2-0:1.0: 4 ports detected
[ 0.841621] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.841626] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.842469] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 0.842540] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 0.842759] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000000009810
[ 0.843082] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.843086] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.843088] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.843125] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 0.843126] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.843127] usb usb3: Product: xHCI Host Controller
[ 0.843128] usb usb3: Manufacturer: Linux 5.13.0-27-generic xhci-hcd
[ 0.843129] usb usb3: SerialNumber: 0000:00:14.0
[ 0.843945] hub 3-0:1.0: USB hub found
[ 0.844013] hub 3-0:1.0: 12 ports detected
[ 0.846437] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
[ 0.846439] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.846440] usb usb4: Product: xHCI Host Controller
[ 0.846442] usb usb4: Manufacturer: Linux 5.13.0-27-generic xhci-hcd
[ 0.846443] usb usb4: SerialNumber: 0000:00:14.0
[ 0.846533] hub 4-0:1.0: USB hub found
[ 0.846547] hub 4-0:1.0: 6 ports detected
[ 0.847197] usb: port power management may be unreliable
[ 0.847835] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 0.855895] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[ 0.856123] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 0.862082] nvme nvme0: 8/0/0 default/read/poll queues
[ 0.863557] nvme0n1: p1 p2 p3 p4 p5
[ 0.875902] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[ 0.876387] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 0.899929] intel-lpss 0000:00:1e.0: enabling device (0004 -> 0006)
[ 0.900222] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 0.920210] intel-lpss 0000:00:1e.2: enabling device (0004 -> 0006)
[ 0.920695] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 1.040505] input: SYNA7DAB:00 06CB:CD40 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA7DAB:00/0018:06CB:CD40.0001/input/input4
[ 1.040596] input: SYNA7DAB:00 06CB:CD40 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA7DAB:00/0018:06CB:CD40.0001/input/input5
[ 1.040660] hid-generic 0018:06CB:CD40.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA7DAB:00 06CB:CD40] on i2c-SYNA7DAB:00
[ 1.051827] i801_smbus 0000:00:1f.4: Timeout waiting for interrupt!
[ 1.051830] i801_smbus 0000:00:1f.4: Transaction timeout
[ 1.053923] i801_smbus 0000:00:1f.4: Failed terminating the transaction
[ 1.054048] i801_smbus 0000:00:1f.4: SMBus is busy, can't use it!
[ 1.095341] thunderbolt 0000:00:0d.2: 0: uid crc8 mismatch (expected: 0x0, got: 0x32)
[ 1.183968] usb 3-5: new full-speed USB device number 2 using xhci_hcd
[ 1.240960] fbcon: Taking over console
[ 1.241040] Console: switching to colour frame buffer device 240x67
[ 1.250022] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 1.337962] usb 3-5: New USB device found, idVendor=1c7a, idProduct=0570, bcdDevice=10.41
[ 1.337971] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.337975] usb 3-5: Product: EgisTec Touch Fingerprint Sensor
[ 1.337978] usb 3-5: Manufacturer: EgisTec
[ 1.337981] usb 3-5: SerialNumber: ÷EI33D20
[ 1.351557] systemd[1]: System time before build time, advancing clock.
[ 1.367119] systemd[1]: Inserted module 'autofs4'
[ 1.468045] usb 3-6: new high-speed USB device number 3 using xhci_hcd
[ 1.477205] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 1.496097] systemd[1]: Detected architecture x86-64.
[ 1.524593] systemd[1]: Set hostname to <StarFighter>.
[ 1.631294] usb 3-6: New USB device found, idVendor=04f2, idProduct=b5c5, bcdDevice=96.18
[ 1.631299] usb 3-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.631300] usb 3-6: Product: HD WebCam
[ 1.631302] usb 3-6: Manufacturer: Generic
[ 1.631303] usb 3-6: SerialNumber: 200901010001
[ 1.664471] systemd[1]: Created slice system-modprobe.slice.
[ 1.664622] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.664766] systemd[1]: Created slice User and Session Slice.
[ 1.664802] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.664911] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.664937] systemd[1]: Reached target User and Group Name Lookups.
[ 1.664946] systemd[1]: Reached target Remote File Systems.
[ 1.664952] systemd[1]: Reached target Slices.
[ 1.665023] systemd[1]: Listening on Syslog Socket.
[ 1.665069] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 1.665094] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 1.665189] systemd[1]: Listening on Journal Audit Socket.
[ 1.665232] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.665278] systemd[1]: Listening on Journal Socket.
[ 1.665328] systemd[1]: Listening on udev Control Socket.
[ 1.665362] systemd[1]: Listening on udev Kernel Socket.
[ 1.665892] systemd[1]: Mounting Huge Pages File System...
[ 1.666418] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.666958] systemd[1]: Mounting Kernel Debug File System...
[ 1.667413] systemd[1]: Mounting Kernel Trace File System...
[ 1.668373] systemd[1]: Starting Journal Service...
[ 1.668870] systemd[1]: Starting Set the console keyboard layout...
[ 1.669400] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 1.669898] systemd[1]: Starting Load Kernel Module drm...
[ 1.670375] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 1.670400] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 1.671392] systemd[1]: Starting Load Kernel Modules...
[ 1.671872] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.672296] systemd[1]: Starting udev Coldplug all Devices...
[ 1.672766] systemd[1]: Starting Uncomplicated firewall...
[ 1.673729] systemd[1]: Mounted Huge Pages File System.
[ 1.673822] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.673894] systemd[1]: Mounted Kernel Debug File System.
[ 1.673971] systemd[1]: Mounted Kernel Trace File System.
[ 1.674436] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 1.675200] systemd[1]: Finished Uncomplicated firewall.
[ 1.680524] EXT4-fs (nvme0n1p5): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 1.681309] systemd[1]: modprobe@drm.service: Succeeded.
[ 1.681565] systemd[1]: Finished Load Kernel Module drm.
[ 1.681924] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 1.682636] systemd[1]: Activating swap /swapfile...
[ 1.683040] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 1.683079] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 1.683660] systemd[1]: Starting Load/Save Random Seed...
[ 1.684349] systemd[1]: Starting Create System Users...
[ 1.688169] lp: driver loaded but no devices found
[ 1.690756] ppdev: user-space parallel port driver
[ 1.696074] systemd[1]: Finished Load/Save Random Seed.
[ 1.697752] systemd[1]: Finished Create System Users.
[ 1.698483] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.700028] systemd[1]: Finished Load Kernel Modules.
[ 1.700790] systemd[1]: Mounting FUSE Control File System...
[ 1.701504] systemd[1]: Mounting Kernel Configuration File System...
[ 1.702631] systemd[1]: Starting Apply Kernel Variables...
[ 1.703735] systemd[1]: Mounted FUSE Control File System.
[ 1.703828] systemd[1]: Mounted Kernel Configuration File System.
[ 1.708700] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 1.709351] systemd[1]: Starting udev Kernel Device Manager...
[ 1.709638] systemd[1]: Finished Set the console keyboard layout.
[ 1.709705] systemd[1]: Reached target Local File Systems (Pre).
[ 1.711660] systemd[1]: Mounting Mount unit for bare, revision 5...
[ 1.713093] systemd[1]: Mounting Mount unit for chromium, revision 1878...
[ 1.715833] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 1.718266] loop0: detected capacity change from 0 to 271848
[ 1.718418] systemd[1]: Mounting Mount unit for core20, revision 1270...
[ 1.721092] systemd[1]: Mounting Mount unit for gnome-3-38-2004, revision 87...
[ 1.722442] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1519...
[ 1.723244] systemd[1]: Mounting Mount unit for snapd, revision 14295...
[ 1.724296] systemd[1]: Mounting Mount unit for snapd, revision 14549...
[ 1.724387] systemd[1]: Activated swap /swapfile.
[ 1.724752] systemd[1]: Started Journal Service.
[ 1.730802] systemd-journald[294]: Received client request to flush runtime journal.
[ 1.732140] systemd-journald[294]: File /var/log/journal/49ecd081a4794146b5b5b090258384f5/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 1.759914] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[ 1.768177] loop1: detected capacity change from 0 to 8
[ 1.820963] loop2: detected capacity change from 0 to 507712
[ 1.827111] input: Intel HID events as /devices/platform/INT33D5:00/input/input7
[ 1.827221] intel-hid INT33D5:00: platform supports 5 button array
[ 1.827237] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input8
[ 1.837345] loop3: detected capacity change from 0 to 133552
[ 1.837943] input: Acer Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/PNP0C09:00/10251229:00/input/input9
[ 1.872811] loop4: detected capacity change from 0 to 88952
[ 1.891998] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 1.892030] acer_wmi: Function bitmap for Communication Button: 0x0
[ 1.892961] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 1.908400] dw-apb-uart.2: ttyS4 at MMIO 0x4010002000 (irq = 20, base_baud = 7500000) is a 16550A
[ 1.909856] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1.910039] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.915458] loop5: detected capacity change from 0 to 126784
[ 1.918104] input: Acer WMI hotkeys as /devices/virtual/input/input10
[ 1.919742] usb 3-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[ 1.919748] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.931572] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 1.931660] intel_rapl_common: Found RAPL domain package
[ 1.940551] Intel(R) Wireless WiFi driver for Linux
[ 1.942336] loop6: detected capacity change from 0 to 88616
[ 1.945890] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 1.945894] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 1.945895] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 1.945896] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 1.945896] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 1.950108] cryptd: max_cpu_qlen set to 1000
[ 1.950301] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[ 1.950314] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[ 1.950616] iwlwifi 0000:00:14.3: loaded firmware version 63.c04f3485.0 Qu-c0-hr-b0-63.ucode op_mode iwlmvm
[ 1.957984] AVX2 version of gcm_enc/dec engaged.
[ 1.958022] AES CTR mode by8 optimization enabled
[ 1.958991] pstore: Using crash dump compression: deflate
[ 1.959012] pstore: Registered efi as persistent store backend
[ 2.015548] mc: Linux media interface: v0.10
[ 2.024878] videodev: Linux video capture interface: v2.00
[ 2.037883] intel_rapl_common: Found RAPL domain package
[ 2.037887] intel_rapl_common: Found RAPL domain core
[ 2.037889] intel_rapl_common: Found RAPL domain uncore
[ 2.037891] intel_rapl_common: Found RAPL domain psys
[ 2.048051] input: SYNA7DAB:00 06CB:CD40 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA7DAB:00/0018:06CB:CD40.0001/input/input11
[ 2.048124] input: SYNA7DAB:00 06CB:CD40 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA7DAB:00/0018:06CB:CD40.0001/input/input12
[ 2.048210] hid-multitouch 0018:06CB:CD40.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA7DAB:00 06CB:CD40] on i2c-SYNA7DAB:00
[ 2.075960] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX203, REV=0x338
[ 2.079359] usb 3-6: Found UVC 1.00 device HD WebCam (04f2:b5c5)
[ 2.087628] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 2.087634] checking generic (4000000000 7e9000) vs hw (601c000000 1000000)
[ 2.087636] checking generic (4000000000 7e9000) vs hw (4000000000 10000000)
[ 2.087638] fb0: switching to inteldrmfb from EFI VGA
[ 2.088144] Console: switching to colour dummy device 80x25
[ 2.088173] thermal thermal_zone9: failed to read out thermal zone (-61)
[ 2.088199] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.091984] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/input/input14
[ 2.092053] usbcore: registered new interface driver uvcvideo
[ 2.099126] Bluetooth: Core ver 2.22
[ 2.099146] NET: Registered protocol family 31
[ 2.099147] Bluetooth: HCI device and connection manager initialized
[ 2.099150] Bluetooth: HCI socket layer initialized
[ 2.099152] Bluetooth: L2CAP socket layer initialized
[ 2.099155] Bluetooth: SCO socket layer initialized
[ 2.102350] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.103472] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9)
[ 2.103444] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 2.219173] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 2.222145] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.222304] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 2.223989] fbcon: i915drmfb (fb0) is primary device
[ 2.224023] Console: switching to colour frame buffer device 240x67
[ 2.224039] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 2.238120] intel_tcc_cooling: Programmable TCC Offset detected
[ 2.243556] usbcore: registered new interface driver btusb
[ 2.244179] Bluetooth: hci0: Bootloader revision 0.4 build 0 week 11 2017
[ 2.244769] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 2.244793] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 2.245187] Bluetooth: hci0: Device revision is 2
[ 2.245190] Bluetooth: hci0: Secure boot is enabled
[ 2.245191] Bluetooth: hci0: OTP lock is enabled
[ 2.245191] Bluetooth: hci0: API lock is enabled
[ 2.245192] Bluetooth: hci0: Debug lock is disabled
[ 2.245193] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 2.246739] Bluetooth: hci0: Found device firmware: intel/ibt-19-32-4.sfi
[ 2.262586] iwlwifi 0000:00:14.3: base HW address: 70:9c:d1:a6:eb:72
[ 2.282933] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
[ 2.319842] sof-audio-pci-intel-icl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 2.319993] sof-audio-pci-intel-icl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 2.320016] sof-audio-pci-intel-icl 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.320229] sof-audio-pci-intel-icl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[ 2.320335] sof-audio-pci-intel-icl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.327743] sof-audio-pci-intel-icl 0000:00:1f.3: use msi interrupt mode
[ 2.352888] sof-audio-pci-intel-icl 0000:00:1f.3: hda codecs found, mask 4
[ 2.352893] sof-audio-pci-intel-icl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[ 2.352897] sof-audio-pci-intel-icl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[ 2.449777] sof-audio-pci-intel-icl 0000:00:1f.3: Firmware info: version 1:6:0-18fab
[ 2.449781] sof-audio-pci-intel-icl 0000:00:1f.3: Firmware: ABI 3:17:0 Kernel ABI 3:18:0
[ 2.458786] sof-audio-pci-intel-icl 0000:00:1f.3: Topology: ABI 3:17:0 Kernel ABI 3:18:0
[ 2.466608] sof-audio-pci-intel-icl 0000:00:1f.3: ASoC: Parent card not yet available, widget card binding deferred
[ 2.478945] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3
[ 2.478947] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 4
[ 2.492137] input: sof-hda-dsp HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input16
[ 2.492165] input: sof-hda-dsp HDMI/DP,pcm=2 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input17
[ 2.492204] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input18
[ 4.134430] Bluetooth: hci0: Waiting for firmware download to complete
[ 4.135157] Bluetooth: hci0: Firmware loaded in 1844154 usecs
[ 4.135239] Bluetooth: hci0: Waiting for device to boot
[ 4.150157] Bluetooth: hci0: Device booted in 14603 usecs
[ 4.150391] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-32-4.ddc
[ 4.152224] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 4.155156] Bluetooth: hci0: Firmware revision 0.0 build 121 week 36 2020
[ 4.215177] Bluetooth: hci0: MSFT filter_enable is already on
[ 4.561680] audit: type=1400 audit(1641790601.207:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=620 comm="apparmor_parser"
[ 4.561746] audit: type=1400 audit(1641790601.207:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=619 comm="apparmor_parser"
[ 4.564807] audit: type=1400 audit(1641790601.211:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=611 comm="apparmor_parser"
[ 4.564988] audit: type=1400 audit(1641790601.211:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=616 comm="apparmor_parser"
[ 4.566445] audit: type=1400 audit(1641790601.211:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=622 comm="apparmor_parser"
[ 4.567682] audit: type=1400 audit(1641790601.211:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=612 comm="apparmor_parser"
[ 4.567826] audit: type=1400 audit(1641790601.211:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=617 comm="apparmor_parser"
[ 4.567828] audit: type=1400 audit(1641790601.215:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=617 comm="apparmor_parser"
[ 4.567830] audit: type=1400 audit(1641790601.215:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=617 comm="apparmor_parser"
[ 4.758457] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.758462] Bluetooth: BNEP filters: protocol multicast
[ 4.758466] Bluetooth: BNEP socket layer initialized
[ 4.762669] NET: Registered protocol family 38
[ 5.415611] loop7: detected capacity change from 0 to 8
[ 6.425017] Bluetooth: RFCOMM TTY layer initialized
[ 6.425025] Bluetooth: RFCOMM socket layer initialized
[ 6.425027] Bluetooth: RFCOMM ver 1.11
[ 8.316670] wlp0s20f3: authenticate with 44:ce:7d:f9:58:9e
[ 8.319649] wlp0s20f3: send auth to 44:ce:7d:f9:58:9e (try 1/3)
[ 8.351704] wlp0s20f3: authenticated
[ 8.356009] wlp0s20f3: associate with 44:ce:7d:f9:58:9e (try 1/3)
[ 8.377089] wlp0s20f3: RX AssocResp from 44:ce:7d:f9:58:9e (capab=0x1411 status=0 aid=2)
[ 8.383386] wlp0s20f3: associated
[ 8.515204] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[ 62.547914] ucsi_acpi USBC000:00: PPM init failed (-110)
orbital@StarFighter:~$ J'avoue que je ne sais pas trop quoi chercher là-dedans...
MicP a écrit :
Regarde aussi tout ce qui pourrait concerner une carte audio dans les options du BIOS et/ou EFI de ta machine.
C'est déjà en cours... déjà que j'ai fait la gueule en voyant qu'il y avait des raccorcis "cachés" pour désactiver optane, je cherche si y'a pas d'autres surprises concernant l'activation des cartes sons.
Si ça intéresse, un roman que j'écris et qui est lisible gratuitement sur le net : Le conflit du Multivers
Hors ligne
#13 Le 27/01/2022, à 16:45
- MicP
Re : [Carte son perdue] Boulet avec tournevis
[ 0.068203] PM: RTC time: 00:04:24, date: 2019-01-01 … [ 0.620518] rtc_cmos rtc_cmos: setting system clock to 2019-01-01T00:04:25 UTC (1546301065) …
On dirait que la pile ou batterie qui alimente la RTC est morte ou débranchée
ou alors c'est que le système n'a pas encore pris le temps
de contacter un serveur de temps pour la remettre à l'heure.
J'aimerai bien voir,
après un arrêt complet de la machine et juste après un redémarrage,
le retour de la ligne de commande suivante :
grep "^batt_status" /proc/driver/rtcPar exemple, voilà ce que ça donne sur ma machine :
michel@debbull:~$ grep "^batt_status" /proc/driver/rtc
batt_status : okay
michel@debbull:~$ =======
Je n'arrive pas à trouver d'information concernant le PC portable ACER swift 3 N19H4
est-ce qu'il n'y aurait pas une partie de la référence qui aurait été oubliée entre swift 3 et N19H4
comme par exemple : SF314-52 ou SF314-41 ou autre
=======
…
[ 2.319842] sof-audio-pci-intel-icl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 2.319993] sof-audio-pci-intel-icl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 2.320016] sof-audio-pci-intel-icl 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.320229] sof-audio-pci-intel-icl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[ 2.320335] sof-audio-pci-intel-icl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.327743] sof-audio-pci-intel-icl 0000:00:1f.3: use msi interrupt mode
[ 2.352888] sof-audio-pci-intel-icl 0000:00:1f.3: hda codecs found, mask 4
[ 2.352893] sof-audio-pci-intel-icl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[ 2.352897] sof-audio-pci-intel-icl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[ 2.449777] sof-audio-pci-intel-icl 0000:00:1f.3: Firmware info: version 1:6:0-18fab
[ 2.449781] sof-audio-pci-intel-icl 0000:00:1f.3: Firmware: ABI 3:17:0 Kernel ABI 3:18:0
[ 2.458786] sof-audio-pci-intel-icl 0000:00:1f.3: Topology: ABI 3:17:0 Kernel ABI 3:18:0
[ 2.466608] sof-audio-pci-intel-icl 0000:00:1f.3: ASoC: Parent card not yet available, widget card binding deferred
…En faisant des recherches avec l'extrait suivant : ASoC: Parent card not yet available, widget card binding deferred
je constate que certains ont eu des problème avec le firmware de cette carte audio et cette version du noyau.
Voici un des fils de discussion trouvés à ce sujet : https://github.com/thesofproject/sof/issues/4662
Dernière modification par MicP (Le 27/01/2022, à 17:28)
Hors ligne
#14 Le 27/01/2022, à 21:23
- Orbital_Verbose
Re : [Carte son perdue] Boulet avec tournevis
Bonsoir MicP,
j'ai juste relancé firefox avant de lancer ta commande :
orbital@StarFighter:~$ grep "^batt_status" /proc/driver/rtc
batt_status : okayJ'ai trouvé la référence à SF314 : c'est SF314-57
Concernant les problèmes liés au firmware, cela n'explique pas pourquoi même avec Windaube je n'ai pas de son...non ?
Demain, je vais faire un test :
- réinstallation d'usine du PC puis test son
- réinstallation dual boot puis test son
si y'a un truc mal géré ça devrait le réglé. Dans le cas contraire, c'est probablement un souci physique.
Vos avis ?
Si ça intéresse, un roman que j'écris et qui est lisible gratuitement sur le net : Le conflit du Multivers
Hors ligne
#15 Le 28/01/2022, à 09:23
- Orbital_Verbose
Re : [Carte son perdue] Boulet avec tournevis
Bon, je viens de tout réinstaller... et rien n'a changé.
J'ai ré-ouvert une nouvelle fois la machine, pas de fil débranché. pas de nappe mal montée... j'avoue que je commence à désespérer
[Edit] je viens de faire un test avec un casque bluetoot, j'ai du son. Je suppose que les enceintes, d'une manière ou d'une autre ont été débranchées/abimées...
Dernière modification par Orbital_Verbose (Le 28/01/2022, à 10:08)
Si ça intéresse, un roman que j'écris et qui est lisible gratuitement sur le net : Le conflit du Multivers
Hors ligne