Xubuntu, TRES lent

domirock · Le 05/07/2022, à 23:46

Bonjour.
Je vois que j'ai déjà posé la question voici 10 ans. Les machines changent. Le pb revient...

LE PROBLEME

Plus de 2 mn après l'allumage pour pouvoir commencer à bosser
Des temps de changement d'application ou de chargement de page internet qui donnent le temps du boire du café quasi en continu, le temps que ça charge.
GIMP qui se ferme tout seul quand il a trop bossé
Un ventilateur qui peine à refroidir le bazar, de sorte que parfois, le PC s'éteint

LA CONFIG

 <quote>
id:	
domi-hp-probook-6540b
description: 	Ordinateur Bloc-notes
produit: 	HP ProBook 6540b (WD685ET#ABF)
fabricant: 	Hewlett-Packard
numéro de série: 	CND0090043
bits: 	64 bits
fonctionnalités: 	smbios-2.6 dmi-2.6 smp vsyscall32
configuration :	
boot	=	normal
chassis	=	notebook
family	=	103C_5336AN
sku	=	WD685ET#ABF
uuid	=	21B6942B-B2FC-DE11-81D0-B9F76E39B4A2
id:	
core
description: 	Carte mre
produit: 	1722
fabricant: 	Hewlett-Packard
identifiant matériel: 	
0
version: 	KBC Version 29.2B
numéro de série: 	CND0090043
id:	
firmware
description: 	BIOS
fabricant: 	Hewlett-Packard
identifiant matériel: 	
9
version: 	68CDD Ver. F.04
date: 	01/27/2010
taille: 	64KiB
capacité: 	2560KiB
fonctionnalités: 	pci pcmcia upgrade shadowing cdboot bootselect edd int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification netboot
id:	
cpu
description: 	CPU
produit: 	Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz
fabricant: 	Intel Corp.
identifiant matériel: 	
0
information bus: 	
cpu@0
version: 	Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz
emplacement: 	CPU 1
taille: 	1354MHz
capacité: 	2267MHz
bits: 	64 bits
horloge: 	133MHz
fonctionnalités: 	lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ht tm pbe syscall nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid dtherm ida arat flush_l1d cpufreq
configuration :	
cores	=	2
enabledcores	=	2
threads	=	4

Si besoin d'autres infos, demandez, je fouille

Merci par avance

Coeur Noir · Le 06/07/2022, à 02:13

Hello,

avant d'explorer des pistes « logicielles » que sais-tu d'autres de cette machine d'un point de vue matériel :
⋅ son âge,
⋅ son ou ses disques ( mécanique, ssd, état… )
⋅ sa « propreté » : poussières, circulation d'air obstruée,
⋅ pâte thermique d'origine ?
⋅ présence d'une carte graphique dédiée ou intégrée,
⋅ quantité de RAM disponible…

…car ce que tu décris ressemble assez à un processeur qu'a chaud, entre autres.

Des couacs matériels pourront apparaître dans le retour de :

sudo dmesg | grep -Ei "erro|warn"          # sudo pas nécessaire sur ×buntu antérieure à 22.04

et

echo ; lsb_release -dcs; uname -srpi; echo $DESKTOP_SESSION sous $XDG_SESSION_TYPE parmi :; ls /usr/share/xsessions

donnera des infos sur ton système ( o.s, version, noyau, env. de bureau, serveur graphique ).

Dernière modification par Coeur Noir (Le 06/07/2022, à 02:26)

iznobe · Le 06/07/2022, à 07:03

Bonjour , est ce que le BIOS de cette carte mere est a jour d ' abord ?

FrancisFDZ · Le 06/07/2022, à 08:24

Bonjour,

Coeur Noir a écrit :

sudo dmesg | grep -Ei "erro|warn"          # sudo pas nécessaire sur ×buntu antérieure à 22.04

En toute logique, sudo n'est pas nécessaire indispensable pour une commande purement informative, qui n'impacte pas de fichier système. Par exemple, pour mount il faut utiliser sudo, sauf pour

mount -l

qui ne fait que donner la liste des partitions montées, sans y toucher.
A priori, dmesg ne modifie pas de fichier système et sudo serait alors superflu, mais il peut y avoir des particularités qui justifieraient son emploi (je ne vois pas lesquelles, mais dans le doute ...)

Dernière modification par FrancisFDZ (Le 06/07/2022, à 08:29)

domirock · Le 06/07/2022, à 08:37

En effet, coeur noir, mon PC n'est pas jeune,( Un probook 6540B; 4 Go de RAM d' occasion achetée il y a des années à une entreprise qui renouvelait son parc) et un peu à l'étroit dans sa ram.
Un processeur qui a chaud ? Je crois très certainement !!!

Voici les retours

sudo dmesg | grep -Ei "erro|warn" 
[sudo] Mot de passe de domi : 
[    1.630539] RAS: Correctable Errors collector initialized.
[    1.659498] ima: Error Communicating to TPM chip
[    1.663105] ima: Error Communicating to TPM chip
[    1.666672] ima: Error Communicating to TPM chip
[    1.670576] ima: Error Communicating to TPM chip
[    1.674127] ima: Error Communicating to TPM chip
[    1.678028] ima: Error Communicating to TPM chip
[    1.681875] ima: Error Communicating to TPM chip
[    1.685726] ima: Error Communicating to TPM chip
[    1.898563] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
[    1.898576] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[    1.898582] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[    1.898589] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[    6.487510] random: 7 urandom warning(s) missed due to ratelimiting
[   12.756703] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 1043.772859] sky2 0000:44:00.0: enp68s0: phy I/O error
[ 1043.772867] sky2 0000:44:00.0: enp68s0: phy I/O error
[ 1043.772872] sky2 0000:44:00.0: enp68s0: phy I/O error
[ 1043.772877] sky2 0000:44:00.0: enp68s0: phy I/O error
[ 1043.772882] sky2 0000:44:00.0: enp68s0: phy I/O error
[ 1372.832564] WARNING: CPU: 0 PID: 215 at kernel/workqueue.c:2619 check_flush_dependency+0x11c/0x140

et

echo ; lsb_release -dcs; uname -srpi; echo $DESKTOP_SESSION sous $XDG_SESSION_TYPE parmi :; ls /usr/share/xsessions

Ubuntu 20.04.4 LTS
focal
Linux 5.4.0-121-generic x86_64 x86_64
xfce sous x11 parmi :
xfce.desktop

Merci pour ce premier regard :-)

xubu1957 · Le 06/07/2022, à 08:52

Bonjour,

On a perdu les photos de la moquette !

Genre lecrabeinfo.net/nettoyer-et-enlever-la-poussiere-de-son-ordinateur

Dernière modification par xubu1957 (Le 06/07/2022, à 08:54)

FrancisFDZ · Le 06/07/2022, à 09:08

D'après crucial, la ram peut être montée à 8Go. Pas sur que ça résoudrait ton problème, mais c'est toujours bon à savoir. Il serait aussi possible, d'après ce même site, de passer le disque en SSD (là ça devrait vraiment booster le système, à toi de voir si le jeu en vaut la chandelle)
Dans un premier temps, un bon dépoussiérage pourrait améliorer les performances, en attendant un "hard upgrade".

[Edit] En cas de changement de DD, l'ancien peut toujours être utilisé en externe via un boitier usb [/Edit]

domirock · Le 06/07/2022, à 09:16

Merci Iznobe

Bonjour , est ce que le BIOS de cette carte mere est a jour d ' abord ?

Comment puis je vérifier ceci?

iznobe · Le 06/07/2022, à 10:03

la commande

sudo lshw -sanitize

te permet de voir quelle version du BIOS est en service actuellement .

Ensuite , il faut se rendre sur le site du constructeur de la carte mere , puis verifier qi il propose un version plus recente du BIOS que celle installée dans ta carte mere .

bien suivre la procedure du constructeur pour effectuer la mise a jour et une fois lancée , ne surtout pas l' interrompre volontairement ou involontairement ( coupure de courant notamment ) .

domirock · Le 06/07/2022, à 11:51

Merci Iznobe.

J'apprends ceci

sudo lshw -sanitize
computer
    description: Ordinateur Bloc-notes
    produit: HP ProBook 6540b (WD685ET#ABF)
    fabricant: Hewlett-Packard
    numéro de série: [REMOVED]
    bits: 64 bits
    fonctionnalités: smbios-2.6 dmi-2.6 smp vsyscall32
    configuration : boot=normal chassis=notebook family=103C_5336AN sku=WD685ET#ABF uuid=[REMOVED]
  *-core
       description: Carte mère
       produit: 1722
       fabricant: Hewlett-Packard
       identifiant matériel: 0
       version: KBC Version 29.2B
       numéro de série: [REMOVED]
     *-firmware
          description: BIOS
          fabricant: Hewlett-Packard
          identifiant matériel: 9
          version: 68CDD Ver. F.04
          date: 01/27/2010
          taille: 64KiB
          capacité: 2560KiB
          fonctionnalités: pci pcmcia upgrade shadowing cdboot bootselect edd

Le bios a plus de 10 ans ... et le ProBook 6540 ne semble plus pris en charge par HP :-((

Dommage...

iznobe · Le 06/07/2022, à 12:06

j ' ai trouvé cette page qui semble correspondre : https://support.hp.com/fr-fr/drivers/se … pc/4095215
cependant , ce n ' est pas tres clair pour moi , les versions n ' ont pas de numero qui se suivent et ta version n ' y apparait pas .

on peut voir dans le detail les versions suivantes :

HP a écrit :

BIOS (4)
recommandé
Mise à jour HP du BIOS système d'ordinateurs portablessystem software Manager Icon
F.21 7.9 MB 28 mars 2012 Télécharger

uncheck
HP Notebook System BIOS (ROM Family 68CDD)system software Manager Icon
F.02 Rev. 4.6 MB 25 nov. 2009 Télécharger

uncheck
HP Notebook System BIOS Updatesystem software Manager Icon
F.60 Rev.A 7.3 MB 30 nov. 2015 Télécharger

uncheck
Mise à jour du BIOS système des ordinateurs portables HP (ROM version 68CDD)system software Manager Icon

Pour le dernier en date ( 2015 ) :

HP a écrit :

Correctifs et améliorations:
- Provides improved security of UEFI code and variables.
- Provides mitigation to the Memory Sinkhole issue which affects certain Intel processors that are based on older Intel micro-architecture designs. HP strongly recommends transitioning promptly to this updated BIOS version which supersedes all previous releases.

Dernière modification par iznobe (Le 06/07/2022, à 12:14)

domirock · Le 06/07/2022, à 12:21

En effet c'est pas pile poil :-).
Je vois qu'au mieux je pourrais installer un bios de 2015.

Quand je lis qu'un fausse manip peut tuer la carte mère ... je me dis que je vais plutôt aller acheter un petit tournevis et voir comment c'est sale en dedans

Le PC chauffe tellement (disque dur compris) que je ne peux pas le tenir sur les genoux.

Merci iznobe d'avoir exploré tout çà :-))

iznobe · Le 06/07/2022, à 12:47

Alors , pour info , le BIOS , ce n' est pas comme un logiciel standard ( il ne peut pas evoluer avec le temps , pas de nouvelle fonctionnalité vu que la carte mere n ' evolue pas ) .
A la sortie de la carte mere , il y a un BIOS nous dirons " d' origine " qui comporte plein de bugs comme tout logiciel .
Au fur et a mesure que les cartes sont utilisées , les bugs remontent et sont corrigés et donc de nouveau BIOS voient le jour et bien sur surtout au debut de sa sortie .
Au plus le temps passe et au moins il y a de bug et donc au moins il y a de nouveau BIOS .

Une carte mere relativemment ancienne aura donc un BIOS relativement ancien et c ' est une tres bonne chose , cela veut dire qu ' il ne comporte plus de bug .

A l' inverse , lorsqu ' on achete une carte mere tres recente , il se peut qu ' un nouveau BIOS sortent tous les 15 jours , au fil des corrections de bugs .

domirock a écrit :

Quand je lis qu'un fausse manip peut tuer la carte mère

il ne s ' agit pas d ' une " fausse " manip .
la seule chose qui peut rendre la ROM inutilisable ( la ou est stocké le BIOS ) et donc la carte mere inutilisable , c ' est si l ' alimentation electrique de l' ordinateur est coupée durant l' ecriture du nouveau BIOS sur la ROM pour une raison ou une autre .

les programmes BIOS sont ecrits de sortent que l' utilisateur soit protégé au maximum : il controle le modele de carte mere , le modele de ROM , la version du BIOS en place dans la ROM, et , siquelquechose n' est pas conforme , il est impossible de lancer la mise a jour , ce sera forcement refusé .

Dernière modification par iznobe (Le 06/07/2022, à 12:48)

domirock · Le 06/07/2022, à 13:12

iznobe a écrit :

Alors , pour info , le BIOS , ce n' est pas comme un logiciel standard .

Mais bien sûr !!! LA carte physique n'évolue plus. Evidemment que quand tus les bugs sont trouvés, on est sur du stable.

Logiciel et matériel, c'est pas la même logique ;-) )

Merci pour cet éclairage !!!!:cool:

Coeur Noir · Le 06/07/2022, à 13:30

FrancisFDZ a écrit :

Coeur Noir a écrit :
sudo dmesg | grep -Ei "erro|warn"          # sudo pas nécessaire sur ×buntu antérieure à 22.04
En toute logique, sudo n'est pas nécessaire indispensable pour une commande purement informative, qui n'impacte pas de fichier système.

dmesg EST un fichier système dont la consultation directe n'est plus possible sous 22.04 par un utilisateur « normal. »
L'idée étant plutôt d'utiliser journalctl pour voir les « logs » ( dont je n'ai pas encore appris les options et astuces, donc je m'en tiens à ce que je sais faire avec dmesg pour l'instant. )

Coeur Noir · Le 06/07/2022, à 13:35

En tout cas : processeur(s) qui chauffe(nt) = ralentissement, voire blocage de la machine.

Règle déjà ce problème par un nettoyage / dépoussiérage des entrailles et le remplacement de la pâte thermique - surtout si cela n'a jamais été fait sur cette machine.

Ensuite, une fois l'aspect matériel amélioré ou résolu, tu pourras enquêter sur l'aspect logiciel.

domirock · Le 06/07/2022, à 16:03

Coeur Noir a écrit :

nettoyage / dépoussiérage des entrailles et le remplacement de la pâte thermique - surtout si cela n'a jamais été fait sur cette machine.

Pâte thermique, jamais fait sur la machine.
Ni par moi d'ailleurs :-)

Je vais chercher un tuto, de la pâte, un tournevis, un karscher (un petit , hein !!!) et je reviens...

Merci encore :-)

FrancisFDZ · Le 06/07/2022, à 18:02

Coeur Noir a écrit :

FrancisFDZ a écrit :
Coeur Noir a écrit :
sudo dmesg | grep -Ei "erro|warn"          # sudo pas nécessaire sur ×buntu antérieure à 22.04
En toute logique, sudo n'est pas nécessaire indispensable pour une commande purement informative, qui n'impacte pas de fichier système.
dmesg EST un fichier système dont la consultation directe n'est plus possible sous 22.04 par un utilisateur « normal. »
L'idée étant plutôt d'utiliser journalctl pour voir les « logs » ( dont je n'ai pas encore appris les options et astuces, donc je m'en tiens à ce que je sais faire avec dmesg pour l'instant. )

Merci de ces précisions, je trouve cependant bizarre qu'une commande n'impactant pas de fichiers système exige sudo pour fonctionner. Mais bon, dans l'ensemble, même si ce n'est pas logique, ce n'est pas trop gênant, surtout qu'un message d'erreur doit informer l'utilisateur du format correct.

xubu1957 · Le 06/07/2022, à 18:05

Bonjour,

Pour info sudo dmesg > depuis la version 20.10

FrancisFDZ · Le 06/07/2022, à 18:06

Lors du démontage justifié pour un dépoussiérage efficace, on peut toujours noter les références de la ram et du disque pour un éventuel "hard upgrade" proposé en #7

domirock · Le 06/07/2022, à 21:24

xubu1957 a écrit :

Pour info sudo dmesg

Avec plaisir :-)

[    0.000000] microcode: microcode updated early to revision 0x11, date = 2018-05-08
[    0.000000] Linux version 5.4.0-121-generic (buildd@lcy02-amd64-013) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #137-Ubuntu SMP Wed Jun 15 13:33:07 UTC 2022 (Ubuntu 5.4.0-121.137-generic 5.4.189)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-121-generic root=UUID=ecabee74-6adc-410a-8168-9ef9ce5162b8 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000ef000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb5affff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb5b0000-0x00000000bb5b7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb5b8000-0x00000000bb5bdfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb5be000-0x00000000bb62dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb62e000-0x00000000bb692fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb693000-0x00000000bb699fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb69a000-0x00000000bb6befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb6bf000-0x00000000bb6cefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb6cf000-0x00000000bb7cefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb7cf000-0x00000000bb7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP ProBook 6540b/1722, BIOS 68CDD Ver. F.04 01/27/2010
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2261.027 MHz processor
[    0.002340] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002342] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002351] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.002356] MTRR default type: uncachable
[    0.002357] MTRR fixed ranges enabled:
[    0.002358]   00000-9FFFF write-back
[    0.002359]   A0000-BFFFF uncachable
[    0.002360]   C0000-FFFFF write-protect
[    0.002361] MTRR variable ranges enabled:
[    0.002362]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.002363]   1 base 000000000 mask F80000000 write-back
[    0.002364]   2 base 080000000 mask FC0000000 write-back
[    0.002365]   3 base 0BC000000 mask FFC000000 uncachable
[    0.002366]   4 base 100000000 mask FC0000000 write-back
[    0.002367]   5 base 138000000 mask FF8000000 uncachable
[    0.002368]   6 disabled
[    0.002368]   7 disabled
[    0.003032] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003197] last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[    0.013951] check: Scanning 1 areas for low memory corruption
[    0.014454] RAMDISK: [mem 0x31983000-0x34cb8fff]
[    0.014463] ACPI: Early table checksum verification disabled
[    0.014468] ACPI: RSDP 0x00000000000F2AC0 000024 (v02 HPQOEM)
[    0.014472] ACPI: XSDT 0x00000000BB7FE120 00008C (v01 HPQOEM SLIC-MPC 0000000F      01000013)
[    0.014480] ACPI: FACP 0x00000000BB7FC000 0000F4 (v03 HPQOEM 1722     0000000F HP   00000001)
[    0.014488] ACPI: DSDT 0x00000000BB7D9000 01D4F7 (v02 HPQOEM 1722     00000001 INTL 20060912)
[    0.014492] ACPI: FACS 0x00000000BB76E000 000040
[    0.014494] ACPI: FACS 0x00000000BB76E000 000040
[    0.014498] ACPI: HPET 0x00000000BB7FB000 000038 (v01 HPQOEM 1722     00000001 HP   00000001)
[    0.014501] ACPI: APIC 0x00000000BB7FA000 0000BC (v01 HPQOEM 1722     00000001 HP   00000001)
[    0.014505] ACPI: MCFG 0x00000000BB7F9000 00003C (v01 HPQOEM 1722     00000001 HP   00000001)
[    0.014508] ACPI: ASF! 0x00000000BB7F8000 0000A0 (v32 HPQOEM 1722     00000001 HP   00000001)
[    0.014512] ACPI: TCPA 0x00000000BB7F7000 000032 (v02 HPQOEM 1722     00000000 HP   00000001)
[    0.014516] ACPI: SSDT 0x00000000BB7D6000 000135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
[    0.014520] ACPI: SSDT 0x00000000BB7D5000 000314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
[    0.014523] ACPI: SLIC 0x00000000BB7D4000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.014527] ACPI: SSDT 0x00000000BB7D3000 00005F (v01 HPQOEM HPQNLP   00000001 INTL 20060912)
[    0.014531] ACPI: SSDT 0x00000000BB7D2000 000A10 (v01 PmRef  CpuPm    00003000 INTL 20060912)
[    0.014534] ACPI: SSDT 0x00000000BB7D1000 000288 (v01 PmRef  Cpu0Tst  00003000 INTL 20060912)
[    0.014538] ACPI: SSDT 0x00000000BB7D0000 000225 (v01 PmRef  ApTst    00003000 INTL 20060912)
[    0.014541] ACPI: Reserving FACP table memory at [mem 0xbb7fc000-0xbb7fc0f3]
[    0.014542] ACPI: Reserving DSDT table memory at [mem 0xbb7d9000-0xbb7f64f6]
[    0.014543] ACPI: Reserving FACS table memory at [mem 0xbb76e000-0xbb76e03f]
[    0.014544] ACPI: Reserving FACS table memory at [mem 0xbb76e000-0xbb76e03f]
[    0.014545] ACPI: Reserving HPET table memory at [mem 0xbb7fb000-0xbb7fb037]
[    0.014545] ACPI: Reserving APIC table memory at [mem 0xbb7fa000-0xbb7fa0bb]
[    0.014546] ACPI: Reserving MCFG table memory at [mem 0xbb7f9000-0xbb7f903b]
[    0.014547] ACPI: Reserving ASF! table memory at [mem 0xbb7f8000-0xbb7f809f]
[    0.014548] ACPI: Reserving TCPA table memory at [mem 0xbb7f7000-0xbb7f7031]
[    0.014549] ACPI: Reserving SSDT table memory at [mem 0xbb7d6000-0xbb7d6134]
[    0.014550] ACPI: Reserving SSDT table memory at [mem 0xbb7d5000-0xbb7d5313]
[    0.014550] ACPI: Reserving SLIC table memory at [mem 0xbb7d4000-0xbb7d4175]
[    0.014551] ACPI: Reserving SSDT table memory at [mem 0xbb7d3000-0xbb7d305e]
[    0.014552] ACPI: Reserving SSDT table memory at [mem 0xbb7d2000-0xbb7d2a0f]
[    0.014553] ACPI: Reserving SSDT table memory at [mem 0xbb7d1000-0xbb7d1287]
[    0.014554] ACPI: Reserving SSDT table memory at [mem 0xbb7d0000-0xbb7d0224]
[    0.014566] ACPI: Local APIC address 0xfee00000
[    0.014701] No NUMA configuration found
[    0.014702] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[    0.014714] NODE_DATA(0) allocated [mem 0x137fd5000-0x137ffffff]
[    0.015024] Zone ranges:
[    0.015025]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.015026]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.015027]   Normal   [mem 0x0000000100000000-0x0000000137ffffff]
[    0.015028]   Device   empty
[    0.015029] Movable zone start for each node
[    0.015032] Early memory node ranges
[    0.015033]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.015034]   node   0: [mem 0x0000000000100000-0x00000000bb5affff]
[    0.015036]   node   0: [mem 0x00000000bb5b8000-0x00000000bb5bdfff]
[    0.015036]   node   0: [mem 0x00000000bb62e000-0x00000000bb692fff]
[    0.015037]   node   0: [mem 0x00000000bb69a000-0x00000000bb6befff]
[    0.015038]   node   0: [mem 0x00000000bb7ff000-0x00000000bb7fffff]
[    0.015038]   node   0: [mem 0x0000000100000000-0x0000000137ffffff]
[    0.015261] Zeroed struct page in unavailable ranges: 18977 pages
[    0.015262] Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff]
[    0.015264] On node 0 totalpages: 996831
[    0.015266]   DMA zone: 64 pages used for memmap
[    0.015266]   DMA zone: 21 pages reserved
[    0.015267]   DMA zone: 3998 pages, LIFO batch:0
[    0.015337]   DMA32 zone: 11930 pages used for memmap
[    0.015338]   DMA32 zone: 763457 pages, LIFO batch:63
[    0.030044]   Normal zone: 3584 pages used for memmap
[    0.030047]   Normal zone: 229376 pages, LIFO batch:63
[    0.033711] Reserving Intel graphics memory at [mem 0xbe000000-0xbfffffff]
[    0.033922] ACPI: PM-Timer IO Port: 0x408
[    0.033926] ACPI: Local APIC address 0xfee00000
[    0.033936] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.033937] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.033938] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.033938] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.033939] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.033940] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.033940] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.033941] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.033956] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.033959] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.033961] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.033963] ACPI: IRQ0 used by override.
[    0.033964] ACPI: IRQ9 used by override.
[    0.033966] Using ACPI (MADT) for SMP configuration information
[    0.033968] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.033976] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.034007] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.034009] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.034010] PM: Registered nosave memory: [mem 0x000a0000-0x000eefff]
[    0.034011] PM: Registered nosave memory: [mem 0x000ef000-0x000fffff]
[    0.034013] PM: Registered nosave memory: [mem 0xbb5b0000-0xbb5b7fff]
[    0.034015] PM: Registered nosave memory: [mem 0xbb5be000-0xbb62dfff]
[    0.034017] PM: Registered nosave memory: [mem 0xbb693000-0xbb699fff]
[    0.034019] PM: Registered nosave memory: [mem 0xbb6bf000-0xbb6cefff]
[    0.034019] PM: Registered nosave memory: [mem 0xbb6cf000-0xbb7cefff]
[    0.034020] PM: Registered nosave memory: [mem 0xbb7cf000-0xbb7fefff]
[    0.034022] PM: Registered nosave memory: [mem 0xbb800000-0xbbffffff]
[    0.034023] PM: Registered nosave memory: [mem 0xbc000000-0xbdffffff]
[    0.034023] PM: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
[    0.034024] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.034025] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.034025] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.034026] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.034026] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.034027] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.034028] PM: Registered nosave memory: [mem 0xfed14000-0xfed18fff]
[    0.034028] PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff]
[    0.034029] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[    0.034029] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[    0.034030] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.034031] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.034031] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.034032] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.034034] [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.034036] Booting paravirtualized kernel on bare hardware
[    0.034039] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.034048] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.034522] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u262144
[    0.034531] pcpu-alloc: s208896 r8192 d28672 u262144 alloc=1*2097152
[    0.034532] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.034574] Built 1 zonelists, mobility grouping on.  Total pages: 981232
[    0.034575] Policy zone: Normal
[    0.034577] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-121-generic root=UUID=ecabee74-6adc-410a-8168-9ef9ce5162b8 ro quiet splash vt.handoff=7
[    0.035325] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.035644] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.035757] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.045642] Calgary: detecting Calgary via BIOS EBDA area
[    0.045645] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.061821] Memory: 3760184K/3987324K available (14339K kernel code, 2401K rwdata, 9504K rodata, 2756K init, 4944K bss, 227140K reserved, 0K cma-reserved)
[    0.061832] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[    0.062045] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.062063] Kernel/User page tables isolation: enabled
[    0.062086] ftrace: allocating 44677 entries in 175 pages
[    0.084129] rcu: Hierarchical RCU implementation.
[    0.084132] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.084133] 	Tasks RCU enabled.
[    0.084134] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.084135] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.087512] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.087866] vt handoff: transparent VT on vt#7
[    0.087878] Console: colour dummy device 80x25
[    0.087886] printk: console [tty0] enabled
[    0.087909] ACPI: Core revision 20190816
[    0.088124] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.088143] APIC: Switch to symmetric I/O mode setup
[    0.088717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.108142] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x209764c0f99, max_idle_ns: 440795232192 ns
[    0.108148] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.05 BogoMIPS (lpj=9044108)
[    0.108150] pid_max: default: 32768 minimum: 301
[    0.108187] LSM: Security Framework initializing
[    0.108201] Yama: becoming mindful.
[    0.108257] AppArmor: AppArmor initialized
[    0.108311] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.108325] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.108345] *** VALIDATE tmpfs ***
[    0.108542] *** VALIDATE proc ***
[    0.108616] *** VALIDATE cgroup1 ***
[    0.108618] *** VALIDATE cgroup2 ***
[    0.108679] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.108689] process: using mwait in idle threads
[    0.108692] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.108693] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.108697] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.108699] Spectre V2 : Mitigation: Retpolines
[    0.108699] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.108700] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.108701] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.108702] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.108703] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.108707] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.108895] Freeing SMP alternatives memory: 40K
[    0.219933] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 430  @ 2.27GHz (family: 0x6, model: 0x25, stepping: 0x2)
[    0.220066] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[    0.220074] core: CPUID marked event: 'bus cycles' unavailable
[    0.220075] ... version:                3
[    0.220075] ... bit width:              48
[    0.220076] ... generic registers:      4
[    0.220077] ... value mask:             0000ffffffffffff
[    0.220077] ... max period:             000000007fffffff
[    0.220078] ... fixed-purpose events:   3
[    0.220078] ... event mask:             000000070000000f
[    0.220126] rcu: Hierarchical SRCU implementation.
[    0.220144] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.220144] smp: Bringing up secondary CPUs ...
[    0.220144] x86: Booting SMP configuration:
[    0.220144] .... node  #0, CPUs:      #1
[    0.222341] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.222341]  #2 #3
[    0.228241] smp: Brought up 1 node, 4 CPUs
[    0.228241] smpboot: Max logical packages: 2
[    0.228241] smpboot: Total of 4 processors activated (18088.21 BogoMIPS)
[    0.232221] devtmpfs: initialized
[    0.232221] x86/mm: Memory block size: 128MB
[    0.232729] PM: Registering ACPI NVS region [mem 0xbb6cf000-0xbb7cefff] (1048576 bytes)
[    0.232729] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.232729] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.232729] pinctrl core: initialized pinctrl subsystem
[    0.232729] PM: RTC time: 20:12:41, date: 2022-07-06
[    0.232729] NET: Registered protocol family 16
[    0.232729] audit: initializing netlink subsys (disabled)
[    0.232729] audit: type=2000 audit(1657138361.144:1): state=initialized audit_enabled=0 res=1
[    0.232729] EISA bus registered
[    0.232729] cpuidle: using governor ladder
[    0.232729] cpuidle: using governor menu
[    0.232729] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.232729] ACPI: bus type PCI registered
[    0.232729] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.232729] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.232729] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.232729] PCI: Using configuration type 1 for base access
[    0.232729] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.232729] mtrr: probably your BIOS does not setup all CPUs.
[    0.232729] mtrr: corrected configuration.
[    0.236158] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.236253] ACPI: Added _OSI(Module Device)
[    0.236255] ACPI: Added _OSI(Processor Device)
[    0.236255] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.236256] ACPI: Added _OSI(Processor Aggregator Device)
[    0.236258] ACPI: Added _OSI(Linux-Dell-Video)
[    0.236259] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.236260] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.257178] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.258498] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.283540] ACPI: Dynamic OEM Table Load:
[    0.283548] ACPI: SSDT 0xFFFF945BB29CE800 0003A9 (v01 PmRef  Cpu0Ist  00003000 INTL 20060912)
[    0.284724] ACPI: Dynamic OEM Table Load:
[    0.284730] ACPI: SSDT 0xFFFF945BB2403000 0005E5 (v01 PmRef  Cpu0Cst  00003001 INTL 20060912)
[    0.286198] ACPI: Dynamic OEM Table Load:
[    0.286203] ACPI: SSDT 0xFFFF945BB29CA400 000303 (v01 PmRef  ApIst    00003000 INTL 20060912)
[    0.287253] ACPI: Dynamic OEM Table Load:
[    0.287258] ACPI: SSDT 0xFFFF945BB2BFC000 000119 (v01 PmRef  ApCst    00003000 INTL 20060912)
[    0.289335] ACPI: EC: EC started
[    0.289336] ACPI: EC: interrupt blocked
[    0.735678] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.735681] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.735682] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.735683] ACPI: Interpreter enabled
[    0.735709] ACPI: (supports S0 S3 S4 S5)
[    0.735711] ACPI: Using IOAPIC for interrupt routing
[    0.735748] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.736144] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.739920] ACPI: Power Resource [APPR] (off)
[    0.743263] ACPI: Power Resource [COMP] (on)
[    0.744281] ACPI: Power Resource [LPP] (on)
[    0.749828] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.749836] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.751655] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.754164] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.754165] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.755157] PCI host bridge to bus 0000:00
[    0.755160] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.755161] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.755162] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.755164] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    0.755165] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
[    0.755166] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[    0.755167] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.755179] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.755211] pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.755319] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    0.755330] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[    0.755336] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.755340] pci 0000:00:02.0: reg 0x20: [io  0x5030-0x5037]
[    0.755509] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.755540] pci 0000:00:16.0: reg 0x10: [mem 0xd4806000-0xd480600f 64bit]
[    0.755644] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.755770] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.755797] pci 0000:00:1a.0: reg 0x10: [mem 0xd4805c00-0xd4805fff]
[    0.755912] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.756046] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.756078] pci 0000:00:1b.0: reg 0x10: [mem 0xd4800000-0xd4803fff 64bit]
[    0.756208] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.756345] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.756487] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.756635] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.756828] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.756918] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[    0.757056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.757205] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[    0.757343] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.757487] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.757514] pci 0000:00:1d.0: reg 0x10: [mem 0xd4805800-0xd4805bff]
[    0.757627] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.757757] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.757970] pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
[    0.758206] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[    0.758234] pci 0000:00:1f.2: reg 0x10: [io  0x5028-0x502f]
[    0.758244] pci 0000:00:1f.2: reg 0x14: [io  0x503c-0x503f]
[    0.758255] pci 0000:00:1f.2: reg 0x18: [io  0x5020-0x5027]
[    0.758265] pci 0000:00:1f.2: reg 0x1c: [io  0x5038-0x503b]
[    0.758276] pci 0000:00:1f.2: reg 0x20: [io  0x5000-0x501f]
[    0.758287] pci 0000:00:1f.2: reg 0x24: [mem 0xd4805000-0xd48057ff]
[    0.758359] pci 0000:00:1f.2: PME# supported from D3hot
[    0.758498] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.758529] pci 0000:00:1f.6: reg 0x10: [mem 0xd4804000-0xd4804fff 64bit]
[    0.758773] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.758780] pci 0000:00:1c.0:   bridge window [mem 0xd4700000-0xd47fffff]
[    0.758929] pci 0000:00:1c.1: PCI bridge to [bus 02-42]
[    0.758933] pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
[    0.758937] pci 0000:00:1c.1:   bridge window [mem 0xd0700000-0xd46fffff]
[    0.759036] pci 0000:43:00.0: [8086:0084] type 00 class 0x028000
[    0.759097] pci 0000:43:00.0: reg 0x10: [mem 0xd0600000-0xd0601fff 64bit]
[    0.759325] pci 0000:43:00.0: PME# supported from D0 D3hot D3cold
[    0.759486] pci 0000:00:1c.3: PCI bridge to [bus 43]
[    0.759493] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.759717] pci 0000:44:00.0: [11ab:436c] type 00 class 0x020000
[    0.759932] pci 0000:44:00.0: reg 0x10: [mem 0xd0500000-0xd0503fff 64bit]
[    0.759999] pci 0000:44:00.0: reg 0x18: [io  0x2000-0x20ff]
[    0.760238] pci 0000:44:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.760653] pci 0000:44:00.0: supports D1 D2
[    0.760655] pci 0000:44:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.761116] pci 0000:00:1c.5: PCI bridge to [bus 44]
[    0.761120] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.761124] pci 0000:00:1c.5:   bridge window [mem 0xd0500000-0xd05fffff]
[    0.761154] pci_bus 0000:45: extended config space not accessible
[    0.761212] pci 0000:00:1e.0: PCI bridge to [bus 45] (subtractive decode)
[    0.761219] pci 0000:00:1e.0:   bridge window [mem 0xd0400000-0xd04fffff]
[    0.761226] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.761228] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.761231] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.761232] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[    0.761234] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfedfffff window] (subtractive decode)
[    0.761235] pci 0000:00:1e.0:   bridge window [mem 0xfee01000-0xffffffff window] (subtractive decode)
[    0.762976] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.763073] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.763166] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.763260] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.763354] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.763447] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.763540] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.763633] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.763665] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    0.763670] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.763737] PCI host bridge to bus 0000:ff
[    0.763739] pci_bus 0000:ff: root bus resource [bus ff]
[    0.763747] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.763799] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.763868] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.763916] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.763963] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.764014] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.764721] ACPI: EC: interrupt unblocked
[    0.764722] ACPI: EC: event unblocked
[    0.764730] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.764731] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    0.764825] iommu: Default domain type: Translated 
[    0.764825] SCSI subsystem initialized
[    0.764825] libata version 3.00 loaded.
[    0.764825] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.764825] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.764825] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.764825] vgaarb: loaded
[    0.764825] ACPI: bus type USB registered
[    0.764825] usbcore: registered new interface driver usbfs
[    0.764825] usbcore: registered new interface driver hub
[    0.764825] usbcore: registered new device driver usb
[    0.764825] pps_core: LinuxPPS API ver. 1 registered
[    0.764825] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.764825] PTP clock support registered
[    0.764825] EDAC MC: Ver: 3.0.0
[    0.764825] PCI: Using ACPI for IRQ routing
[    0.772822] PCI: pci_cache_line_size set to 64 bytes
[    0.772910] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.772911] e820: reserve RAM buffer [mem 0xbb5b0000-0xbbffffff]
[    0.772912] e820: reserve RAM buffer [mem 0xbb5be000-0xbbffffff]
[    0.772914] e820: reserve RAM buffer [mem 0xbb693000-0xbbffffff]
[    0.772915] e820: reserve RAM buffer [mem 0xbb6bf000-0xbbffffff]
[    0.772916] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[    0.773061] NetLabel: Initializing
[    0.773062] NetLabel:  domain hash size = 128
[    0.773062] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.773082] NetLabel:  unlabeled traffic allowed by default
[    0.777405] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.777411] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.779465] clocksource: Switched to clocksource tsc-early
[    0.793291] *** VALIDATE bpf ***
[    0.793391] VFS: Disk quotas dquot_6.6.0
[    0.793415] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.793451] *** VALIDATE ramfs ***
[    0.793455] *** VALIDATE hugetlbfs ***
[    0.793566] AppArmor: AppArmor Filesystem Enabled
[    0.793607] pnp: PnP ACPI init
[    0.794132] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.794134] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.794135] system 00:00: [mem 0xfed1b000-0xfed1bfff] has been reserved
[    0.794137] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.794138] system 00:00: [mem 0xd4900000-0xd4900fff] has been reserved
[    0.794140] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.794141] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.794143] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.794145] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.794152] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.794362] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.794469] system 00:02: [io  0x0200-0x027f] has been reserved
[    0.794471] system 00:02: [io  0x1000-0x100f] has been reserved
[    0.794472] system 00:02: [io  0xffff] has been reserved
[    0.794474] system 00:02: [io  0xffff] has been reserved
[    0.794475] system 00:02: [io  0x0400-0x047f] has been reserved
[    0.794477] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.794478] system 00:02: [io  0xef80-0xef9f] has been reserved
[    0.794483] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.794515] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.795264] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[    0.795928] pnp 00:05: [dma 0 disabled]
[    0.796019] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.796048] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.796076] pnp 00:07: Plug and Play ACPI device, IDs SYN0164 SYN0100 SYN0002 PNP0f13 (active)
[    0.796889] pnp: PnP ACPI: found 8 devices
[    0.798499] thermal_sys: Registered thermal governor 'fair_share'
[    0.798500] thermal_sys: Registered thermal governor 'bang_bang'
[    0.798501] thermal_sys: Registered thermal governor 'step_wise'
[    0.798501] thermal_sys: Registered thermal governor 'user_space'
[    0.798502] thermal_sys: Registered thermal governor 'power_allocator'
[    0.803008] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.803051] pci 0000:44:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.803059] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-42] add_size 200000 add_align 100000
[    0.803071] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4a00000-0xd4bfffff 64bit pref]
[    0.803073] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.803080] pci 0000:00:1c.0:   bridge window [mem 0xd4700000-0xd47fffff]
[    0.803089] pci 0000:00:1c.1: PCI bridge to [bus 02-42]
[    0.803093] pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
[    0.803098] pci 0000:00:1c.1:   bridge window [mem 0xd0700000-0xd46fffff]
[    0.803103] pci 0000:00:1c.1:   bridge window [mem 0xd4a00000-0xd4bfffff 64bit pref]
[    0.803110] pci 0000:00:1c.3: PCI bridge to [bus 43]
[    0.803115] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.803126] pci 0000:44:00.0: BAR 6: assigned [mem 0xd0520000-0xd053ffff pref]
[    0.803128] pci 0000:00:1c.5: PCI bridge to [bus 44]
[    0.803131] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.803136] pci 0000:00:1c.5:   bridge window [mem 0xd0500000-0xd05fffff]
[    0.803146] pci 0000:00:1e.0: PCI bridge to [bus 45]
[    0.803152] pci 0000:00:1e.0:   bridge window [mem 0xd0400000-0xd04fffff]
[    0.803162] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.803164] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.803165] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.803166] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff window]
[    0.803167] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
[    0.803169] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
[    0.803170] pci_bus 0000:01: resource 1 [mem 0xd4700000-0xd47fffff]
[    0.803172] pci_bus 0000:02: resource 0 [io  0x3000-0x4fff]
[    0.803173] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd46fffff]
[    0.803174] pci_bus 0000:02: resource 2 [mem 0xd4a00000-0xd4bfffff 64bit pref]
[    0.803175] pci_bus 0000:43: resource 1 [mem 0xd0600000-0xd06fffff]
[    0.803177] pci_bus 0000:44: resource 0 [io  0x2000-0x2fff]
[    0.803178] pci_bus 0000:44: resource 1 [mem 0xd0500000-0xd05fffff]
[    0.803180] pci_bus 0000:45: resource 1 [mem 0xd0400000-0xd04fffff]
[    0.803181] pci_bus 0000:45: resource 4 [io  0x0000-0x0cf7 window]
[    0.803182] pci_bus 0000:45: resource 5 [io  0x0d00-0xffff window]
[    0.803183] pci_bus 0000:45: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.803185] pci_bus 0000:45: resource 7 [mem 0xc0000000-0xdfffffff window]
[    0.803186] pci_bus 0000:45: resource 8 [mem 0xf0000000-0xfedfffff window]
[    0.803187] pci_bus 0000:45: resource 9 [mem 0xfee01000-0xffffffff window]
[    0.803334] NET: Registered protocol family 2
[    0.803447] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.804137] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.804193] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.804353] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.804501] TCP: Hash tables configured (established 32768 bind 32768)
[    0.804561] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.804600] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.804672] NET: Registered protocol family 1
[    0.804677] NET: Registered protocol family 44
[    0.804705] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.804713] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.806157] PCI: CLS 64 bytes, default 64
[    0.806231] Trying to unpack rootfs image as initramfs...
[    1.002544] Freeing initrd memory: 52440K
[    1.002617] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.002620] software IO TLB: mapped [mem 0xb75b0000-0xbb5b0000] (64MB)
[    1.002882] check: Scanning for low memory corruption every 60 seconds
[    1.003434] Initialise system trusted keyrings
[    1.003446] Key type blacklist registered
[    1.003488] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.005133] zbud: loaded
[    1.005586] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.005773] fuse: init (API version 7.31)
[    1.005793] *** VALIDATE fuse ***
[    1.005795] *** VALIDATE fuse ***
[    1.005926] Platform Keyring initialized
[    1.009813] Key type asymmetric registered
[    1.009814] Asymmetric key parser 'x509' registered
[    1.009827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.009870] io scheduler mq-deadline registered
[    1.010557] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[    1.011010] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
[    1.011042] pcieport 0000:00:1c.1: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.011566] pcieport 0000:00:1c.3: PME: Signaling with IRQ 26
[    1.012003] pcieport 0000:00:1c.5: PME: Signaling with IRQ 27
[    1.012085] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.012156] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    1.012157] vesafb: scrolling: redraw
[    1.012159] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.012183] vesafb: framebuffer at 0xc0000000, mapped to 0x(____ptrval____), using 4160k, total 4160k
[    1.012236] fbcon: Deferring console take-over
[    1.012237] fb0: VESA VGA frame buffer device
[    1.012252] intel_idle: MWAIT substates: 0x1120
[    1.012252] intel_idle: v0.4.1 model 0x25
[    1.012446] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.013018] ACPI: AC Adapter [AC] (on-line)
[    1.013153] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.013194] ACPI: Sleep Button [SLPB]
[    1.013268] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.013303] ACPI: Lid Switch [LID]
[    1.013375] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.013449] ACPI: Power Button [PWRF]
[    1.433143] thermal LNXTHERM:00: registered as thermal_zone0
[    1.433145] ACPI: Thermal Zone [EXTZ] (25 C)
[    1.433340] thermal LNXTHERM:01: registered as thermal_zone1
[    1.433342] ACPI: Thermal Zone [EX2Z] (0 C)
[    1.433559] thermal LNXTHERM:02: registered as thermal_zone2
[    1.433561] ACPI: Thermal Zone [PWMZ] (0 C)
[    1.439586] thermal LNXTHERM:03: registered as thermal_zone3
[    1.439588] ACPI: Thermal Zone [LOCZ] (28 C)
[    1.441647] thermal LNXTHERM:04: registered as thermal_zone4
[    1.441649] ACPI: Thermal Zone [GFXZ] (0 C)
[    1.461202] thermal LNXTHERM:05: registered as thermal_zone5
[    1.461204] ACPI: Thermal Zone [BATZ] (27 C)
[    1.475855] thermal LNXTHERM:06: registered as thermal_zone6
[    1.475857] ACPI: Thermal Zone [EGXZ] (0 C)
[    1.476634] thermal LNXTHERM:07: registered as thermal_zone7
[    1.476636] ACPI: Thermal Zone [CPUZ] (35 C)
[    1.477310] thermal LNXTHERM:08: registered as thermal_zone8
[    1.477312] ACPI: Thermal Zone [MCHZ] (35 C)
[    1.478088] thermal LNXTHERM:09: registered as thermal_zone9
[    1.478090] ACPI: Thermal Zone [PCHZ] (59 C)
[    1.478441] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.499330] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.502769] Linux agpgart interface v0.103
[    1.505965] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
[    1.525057] tpm tpm0: TPM is disabled/deactivated (0x7)
[    1.531819] battery: ACPI: Battery Slot [BAT0] (battery present)
[    1.531948] battery: ACPI: Battery Slot [BAT1] (battery absent)
[    1.664271] loop: module loaded
[    1.664832] tun: Universal TUN/TAP device driver, 1.6
[    1.665002] PPP generic driver version 2.4.2
[    1.665353] VFIO - User Level meta-driver version: 0.3
[    1.665598] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.665605] ehci-pci: EHCI PCI platform driver
[    1.666311] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.666323] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.666344] ehci-pci 0000:00:1a.0: debug port 2
[    1.670288] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.670306] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4805c00
[    1.684239] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.684385] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.684388] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.684390] usb usb1: Product: EHCI Host Controller
[    1.684392] usb usb1: Manufacturer: Linux 5.4.0-121-generic ehci_hcd
[    1.684395] usb usb1: SerialNumber: 0000:00:1a.0
[    1.684708] hub 1-0:1.0: USB hub found
[    1.684726] hub 1-0:1.0: 2 ports detected
[    1.685626] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.685634] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.685649] ehci-pci 0000:00:1d.0: debug port 2
[    1.689584] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.689607] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd4805800
[    1.704274] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.704383] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.704386] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.704388] usb usb2: Product: EHCI Host Controller
[    1.704390] usb usb2: Manufacturer: Linux 5.4.0-121-generic ehci_hcd
[    1.704393] usb usb2: SerialNumber: 0000:00:1d.0
[    1.704718] hub 2-0:1.0: USB hub found
[    1.704734] hub 2-0:1.0: 2 ports detected
[    1.705065] ehci-platform: EHCI generic platform driver
[    1.705084] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.705090] ohci-pci: OHCI PCI platform driver
[    1.705105] ohci-platform: OHCI generic platform driver
[    1.705116] uhci_hcd: USB Universal Host Controller Interface driver
[    1.705221] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.706993] i8042: Detected active multiplexing controller, rev 1.1
[    1.707664] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.707674] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.707731] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.707778] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.707823] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.708141] mousedev: PS/2 mouse device common for all mice
[    1.708937] rtc_cmos 00:03: RTC can wake from S4
[    1.709299] rtc_cmos 00:03: registered as rtc0
[    1.709330] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.709343] i2c /dev entries driver
[    1.709450] device-mapper: uevent: version 1.0.3
[    1.709599] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    1.709641] platform eisa.0: Probing EISA bus 0
[    1.709644] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.709647] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.709650] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.709652] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.709655] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.709657] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.709659] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.709661] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.709664] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.709666] platform eisa.0: EISA: Detected 0 cards
[    1.709671] intel_pstate: CPU model not supported
[    1.709765] ledtrig-cpu: registered to indicate activity on CPUs
[    1.709895] drop_monitor: Initializing network drop monitor service
[    1.710103] NET: Registered protocol family 10
[    1.720759] Segment Routing with IPv6
[    1.720817] NET: Registered protocol family 17
[    1.721024] Key type dns_resolver registered
[    1.721835] RAS: Correctable Errors collector initialized.
[    1.721908] microcode: sig=0x20652, pf=0x10, revision=0x11
[    1.722013] microcode: Microcode Update Driver: v2.2.
[    1.722019] IPI shorthand broadcast: enabled
[    1.722032] sched_clock: Marking stable (1721668172, 336576)->(1729090397, -7085649)
[    1.722316] registered taskstats version 1
[    1.722333] Loading compiled-in X.509 certificates
[    1.723676] Loaded X.509 cert 'Build time autogenerated kernel key: 662bb8449133208bee541ffe48aa3ae91dfcfc51'
[    1.725223] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    1.727154] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    1.727156] blacklist: Loading compiled-in revocation X.509 certificates
[    1.727202] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    1.727298] zswap: loaded using pool lzo/zbud
[    1.727488] Key type ._fscrypt registered
[    1.727490] Key type .fscrypt registered
[    1.733293] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.738408] Key type big_key registered
[    1.738422] Key type trusted registered
[    1.745148] Key type encrypted registered
[    1.745158] AppArmor: AppArmor sha1 policy hashing enabled
[    1.745204] ima: Allocated hash algorithm: sha1
[    1.748932] ima: Error Communicating to TPM chip
[    1.752682] ima: Error Communicating to TPM chip
[    1.756238] ima: Error Communicating to TPM chip
[    1.760068] ima: Error Communicating to TPM chip
[    1.764009] ima: Error Communicating to TPM chip
[    1.767575] ima: Error Communicating to TPM chip
[    1.771577] ima: Error Communicating to TPM chip
[    1.775538] ima: Error Communicating to TPM chip
[    1.782286] ima: No architecture policies found
[    1.782305] evm: Initialising EVM extended attributes:
[    1.782307] evm: security.selinux
[    1.782308] evm: security.SMACK64
[    1.782309] evm: security.SMACK64EXEC
[    1.782310] evm: security.SMACK64TRANSMUTE
[    1.782311] evm: security.SMACK64MMAP
[    1.782312] evm: security.apparmor
[    1.782312] evm: security.ima
[    1.782313] evm: security.capability
[    1.782315] evm: HMAC attrs: 0x1
[    1.782803] PM:   Magic number: 14:745:244
[    1.783012] rtc_cmos 00:03: setting system clock to 2022-07-06T20:12:43 UTC (1657138363)
[    1.786088] Freeing unused decrypted memory: 2040K
[    1.786790] Freeing unused kernel image memory: 2756K
[    1.786884] Write protecting the kernel read-only data: 26624k
[    1.787690] Freeing unused kernel image memory: 2008K
[    1.788009] Freeing unused kernel image memory: 736K
[    1.802180] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.802239] x86/mm: Checking user space page tables
[    1.816123] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.816127] Run /init as init process
[    1.944176] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.964185] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.003333] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
[    2.003342] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.003346] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[    2.003350] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.003351] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[    2.003356] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.003357] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[    2.003361] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.003361] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.004255] tsc: Refined TSC clocksource calibration: 2261.003 MHz
[    2.004262] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x20974e31556, max_idle_ns: 440795315174 ns
[    2.004296] clocksource: Switched to clocksource tsc
[    2.004438] sky2: driver version 1.30
[    2.007977] sky2 0000:44:00.0: Yukon-2 Extreme chip revision 2
[    2.012188] sky2 0000:44:00.0 eth0: addr 70:5a:b6:94:aa:cf
[    2.049385] ahci 0000:00:1f.2: version 3.0
[    2.049867] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.049918] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x27 impl SATA mode
[    2.049920] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    2.056906] sky2 0000:44:00.0 enp68s0: renamed from eth0
[    2.093429] scsi host0: ahci
[    2.093736] scsi host1: ahci
[    2.093875] scsi host2: ahci
[    2.094038] scsi host3: ahci
[    2.094167] scsi host4: ahci
[    2.094295] scsi host5: ahci
[    2.094357] ata1: SATA max UDMA/133 abar m2048@0xd4805000 port 0xd4805100 irq 29
[    2.094360] ata2: SATA max UDMA/133 abar m2048@0xd4805000 port 0xd4805180 irq 29
[    2.094363] ata3: SATA max UDMA/133 abar m2048@0xd4805000 port 0xd4805200 irq 29
[    2.094363] ata4: DUMMY
[    2.094364] ata5: DUMMY
[    2.094367] ata6: SATA max UDMA/133 abar m2048@0xd4805000 port 0xd4805380 irq 29
[    2.108919] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[    2.108923] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.109364] hub 1-1:1.0: USB hub found
[    2.109572] hub 1-1:1.0: 6 ports detected
[    2.124909] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[    2.124914] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.125316] hub 2-1:1.0: USB hub found
[    2.125532] hub 2-1:1.0: 8 ports detected
[    2.396232] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    2.407810] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.408817] ata1.00: unexpected _GTF length (8)
[    2.450101] ata1.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133
[    2.450104] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32)
[    2.451937] ata1.00: unexpected _GTF length (8)
[    2.452289] ata1.00: configured for UDMA/133
[    2.452742] scsi 0:0:0:0: Direct-Access     ATA      ST9320423AS      SDM1 PQ: 0 ANSI: 5
[    2.453120] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.453226] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.453248] sd 0:0:0:0: [sda] Write Protect is off
[    2.453250] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.453285] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.489431]  sda: sda1 sda2 < sda5 >
[    2.512396] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.512704] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=231d, bcdDevice= 3.06
[    2.512708] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.512711] usb 1-1.1: Product: HP Integrated Module
[    2.512714] usb 1-1.1: Manufacturer: Broadcom Corp
[    2.538786] random: fast init done
[    2.560953] pci_bus 0000:01: Allocating resources
[    2.560959] pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    2.560962] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    2.560970] pci_bus 0000:02: Allocating resources
[    2.560979] pci_bus 0000:43: Allocating resources
[    2.560987] pcieport 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 43] add_size 1000
[    2.560989] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 43] add_size 200000 add_align 100000
[    2.560997] pci_bus 0000:44: Allocating resources
[    2.561022] pcieport 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 44] add_size 200000 add_align 100000
[    2.561038] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xd4c00000-0xd4dfffff 64bit pref]
[    2.561042] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xd4e00000-0xd4ffffff 64bit pref]
[    2.561045] pcieport 0000:00:1c.5: BAR 15: assigned [mem 0xd5000000-0xd51fffff 64bit pref]
[    2.561049] pcieport 0000:00:1c.0: BAR 13: assigned [io  0x6000-0x6fff]
[    2.561051] pcieport 0000:00:1c.3: BAR 13: assigned [io  0x7000-0x7fff]
[    2.561055] pci 0000:00:1e.0: PCI bridge to [bus 45]
[    2.561061] pci 0000:00:1e.0:   bridge window [mem 0xd0400000-0xd04fffff]
[    2.592199] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    2.702285] usb 1-1.3: New USB device found, idVendor=138a, idProduct=0007, bcdDevice= 0.72
[    2.702288] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.702291] usb 1-1.3: SerialNumber: 1b127eb61f00
[    2.702610] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.702627] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.702657] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.747939] psmouse serio4: synaptics: queried max coordinates: x [..5536], y [..4758]
[    2.767578] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.771286] ata2.00: unexpected _GTF length (8)
[    2.771291] ata2.00: ATAPI: hp      DVDRAM GT30L, mP04, max UDMA/100
[    2.775226] ata2.00: unexpected _GTF length (8)
[    2.775233] ata2.00: configured for UDMA/100
[    2.778358] scsi 1:0:0:0: CD-ROM            hp       DVDRAM GT30L     mP04 PQ: 0 ANSI: 5
[    2.780201] usb 1-1.5: new high-speed USB device number 5 using ehci-pci
[    2.816899] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04731/0xa41000/0xa0000/0x0, board id: 0, fw id: 601687
[    2.847356] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.847360] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.860436] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[    2.884289] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.884414] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.927477] usb 1-1.5: New USB device found, idVendor=04f2, idProduct=b15e, bcdDevice=85.54
[    2.927480] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.927482] usb 1-1.5: Product: HP Webcam [2 MP Macro]
[    2.927484] usb 1-1.5: Manufacturer: Chicony Electronics Co., Ltd.
[    3.199831] ata3: SATA link down (SStatus 0 SControl 300)
[    3.515943] ata6: SATA link down (SStatus 0 SControl 300)
[    3.904198] raid6: sse2x4   gen()  8183 MB/s
[    3.952191] raid6: sse2x4   xor()  5989 MB/s
[    4.000200] raid6: sse2x2   gen()  7265 MB/s
[    4.048198] raid6: sse2x2   xor()  5428 MB/s
[    4.096193] raid6: sse2x1   gen()  6127 MB/s
[    4.144198] raid6: sse2x1   xor()  4694 MB/s
[    4.144199] raid6: using algorithm sse2x4 gen() 8183 MB/s
[    4.144200] raid6: .... xor() 5989 MB/s, rmw enabled
[    4.144201] raid6: using ssse3x2 recovery algorithm
[    4.145591] xor: measuring software checksum speed
[    4.184195]    prefetch64-sse: 11427.000 MB/sec
[    4.224199]    generic_sse:  9913.000 MB/sec
[    4.224200] xor: using function: prefetch64-sse (11427.000 MB/sec)
[    4.225500] async_tx: api initialized (async)
[    4.341623] fbcon: Taking over console
[    4.341742] Console: switching to colour frame buffer device 170x48
[    4.463321] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.645951] crng init done
[    6.645954] random: 7 urandom warning(s) missed due to ratelimiting
[    6.861306] systemd[1]: Inserted module 'autofs4'
[    7.039938] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    7.056426] systemd[1]: Detected architecture x86-64.
[    7.089459] systemd[1]: Set hostname to <domi-HP-ProBook-6540b>.
[    9.421445] systemd[1]: Configuration file /etc/systemd/system/vpnht.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[   11.783303] systemd[1]: Created slice system-modprobe.slice.
[   11.783650] systemd[1]: Created slice system-openvpn\x2dserver.slice.
[   11.783963] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   11.784313] systemd[1]: Created slice User and Session Slice.
[   11.784399] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   11.784691] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   11.784762] systemd[1]: Reached target User and Group Name Lookups.
[   11.784784] systemd[1]: Reached target Slices.
[   11.784974] systemd[1]: Listening on Syslog Socket.
[   11.785099] systemd[1]: Listening on fsck to fsckd communication Socket.
[   11.785174] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   11.785434] systemd[1]: Listening on Journal Audit Socket.
[   11.785555] systemd[1]: Listening on Journal Socket (/dev/log).
[   11.785718] systemd[1]: Listening on Journal Socket.
[   11.785873] systemd[1]: Listening on udev Control Socket.
[   11.785969] systemd[1]: Listening on udev Kernel Socket.
[   11.787176] systemd[1]: Mounting Huge Pages File System...
[   11.788614] systemd[1]: Mounting POSIX Message Queue File System...
[   11.790833] systemd[1]: Mounting Kernel Debug File System...
[   11.792283] systemd[1]: Mounting Kernel Trace File System...
[   11.794862] systemd[1]: Starting Journal Service...
[   11.796658] systemd[1]: Starting Set the console keyboard layout...
[   11.798716] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   11.800999] systemd[1]: Starting Load Kernel Module drm...
[   11.803136] systemd[1]: Started Nameserver information manager.
[   12.078064] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   12.078141] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   12.271386] systemd[1]: Starting Load Kernel Modules...
[   12.273221] systemd[1]: Starting Remount Root and Kernel File Systems...
[   12.275346] systemd[1]: Starting udev Coldplug all Devices...
[   12.277222] systemd[1]: Starting Uncomplicated firewall...
[   12.280268] systemd[1]: Started Journal Service.
[   12.400263] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   12.600604] IPMI message handler: version 39.2
[   12.620448] systemd-journald[295]: Received client request to flush runtime journal.
[   12.641631] ipmi device interface
[   12.960285] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k FS
[   20.096346] Blacklisted intel_ips for HP ProBook
[   20.319472] hp_accel: hardware type HPB65xx found
[   20.320262] lis3lv02d: 8 bits sensor found
[   20.364233] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
[   20.448943] input: HP WMI hotkeys as /devices/virtual/input/input13
[   20.605896] Bluetooth: Core ver 2.22
[   20.605929] NET: Registered protocol family 31
[   20.605931] Bluetooth: HCI device and connection manager initialized
[   20.605937] Bluetooth: HCI socket layer initialized
[   20.605940] Bluetooth: L2CAP socket layer initialized
[   20.605945] Bluetooth: SCO socket layer initialized
[   20.605960] parport_pc 00:05: reported by Plug and Play ACPI
[   20.606574] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[   20.673920] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   20.674485] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   21.950757] usbcore: registered new interface driver btusb
[   22.010314] kvm: disabled by bios
[   22.017425] mc: Linux media interface: v0.10
[   22.055410] kvm: disabled by bios
[   22.067666] Intel(R) Wireless WiFi driver for Linux
[   22.067668] Copyright(c) 2003- 2015 Intel Corporation
[   22.067956] iwlwifi 0000:43:00.0: can't disable ASPM; OS doesn't have ASPM control
[   22.107358] kvm: disabled by bios
[   22.209012] videodev: Linux video capture interface: v2.00
[   22.216635] kvm: disabled by bios
[   22.229716] pci 0000:00:00.0: Intel HD Graphics Chipset
[   22.229743] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[   22.230266] pci 0000:00:00.0: detected 32768K stolen memory
[   22.230329] checking generic (c0000000 410000) vs hw (c0000000 10000000)
[   22.230331] fb0: switching to inteldrmfb from VESA VGA
[   22.230540] Console: switching to colour dummy device 80x25
[   22.230603] i915 0000:00:02.0: vgaarb: deactivate vga console
[   22.234431] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   22.234433] [drm] Driver supports precise vblank timestamp query.
[   22.237298] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   22.269146] [drm] RC6 disabled, disabling runtime PM support
[   22.277148] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[   22.282001] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   22.292961] acpi device:0d: registered as cooling_device4
[   22.293180] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14
[   22.308339] fbcon: i915drmfb (fb0) is primary device
[   22.308435] Console: switching to colour frame buffer device 170x48
[   22.308488] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[   23.146461] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   23.395838] iwlwifi 0000:43:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
[   25.802504] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD75B3X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   25.802507] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   25.802509] snd_hda_codec_idt hdaudioC0D0:    hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
[   25.802510] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   25.802511] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   25.802513] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0xc
[   25.802514] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
[   25.802515] snd_hda_codec_idt hdaudioC0D0:      Line=0xe
[   25.875152] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   25.875242] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   25.875299] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   25.875352] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   25.875407] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   25.875468] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[   25.875519] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[   28.605024] uvcvideo: Found UVC 1.00 device HP Webcam [2 MP Macro] (04f2:b15e)
[   28.649998] input: HP Webcam [2 MP Macro]: HP Webc as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input22
[   28.650100] usbcore: registered new interface driver uvcvideo
[   28.650102] USB Video Class driver (1.1.1)
[   28.703507] iwlwifi 0000:43:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   28.703510] iwlwifi 0000:43:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   28.703511] iwlwifi 0000:43:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   28.703513] iwlwifi 0000:43:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[   28.742426] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   34.385284] ppdev: user-space parallel port driver
[   35.327545] iwlwifi 0000:43:00.0 wlo1: renamed from wlan0
[   42.359498] audit: type=1400 audit(1657138404.069:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1412 comm="apparmor_parser"
[   42.459186] audit: type=1400 audit(1657138404.169:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1416 comm="apparmor_parser"
[   42.459194] audit: type=1400 audit(1657138404.169:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1416 comm="apparmor_parser"
[   42.512679] audit: type=1400 audit(1657138404.225:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1411 comm="apparmor_parser"
[   42.523571] audit: type=1400 audit(1657138404.233:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1418 comm="apparmor_parser"
[   42.523582] audit: type=1400 audit(1657138404.233:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1418 comm="apparmor_parser"
[   42.523588] audit: type=1400 audit(1657138404.233:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1418 comm="apparmor_parser"
[   42.529617] audit: type=1400 audit(1657138404.241:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=1419 comm="apparmor_parser"
[   42.545789] audit: type=1400 audit(1657138404.257:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1410 comm="apparmor_parser"
[   42.561849] audit: type=1400 audit(1657138404.273:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1421 comm="apparmor_parser"
[   55.536940] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   55.536942] Bluetooth: BNEP filters: protocol multicast
[   55.536947] Bluetooth: BNEP socket layer initialized
[   56.871815] NET: Registered protocol family 38
[   67.668983] bpfilter: Loaded bpfilter_umh pid 1764
[   67.669383] Started bpfilter
[   75.337902] sky2 0000:44:00.0 enp68s0: enabling interface
[   75.357849] iwlwifi 0000:43:00.0: Radio type=0x0-0x0-0x3
[   75.422678] iwlwifi 0000:43:00.0: Radio type=0x0-0x0-0x3
[   77.711737] kauditd_printk_skb: 99 callbacks suppressed
[   77.711738] audit: type=1400 audit(1657138439.421:111): apparmor="DENIED" operation="open" profile="snap.pulseaudio.pulseaudio" name="/etc/pulse/daemon.conf" pid=1843 comm="pulseaudio" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   78.057835] audit: type=1400 audit(1657138439.769:112): apparmor="DENIED" operation="open" profile="snap.pulseaudio.pulseaudio" name="/sys/devices/virtual/dmi/id/board_vendor" pid=1843 comm="pulseaudio" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   79.602106] audit: type=1400 audit(1657138441.313:113): apparmor="DENIED" operation="open" profile="snap.pulseaudio.pulseaudio" name="/sys/devices/virtual/dmi/id/board_vendor" pid=1843 comm="pulseaudio" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   79.710411] audit: type=1400 audit(1657138441.421:114): apparmor="DENIED" operation="open" profile="snap.pulseaudio.pulseaudio" name="/sys/devices/virtual/dmi/id/board_vendor" pid=1843 comm="pulseaudio" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[  101.900258] Bluetooth: RFCOMM TTY layer initialized
[  101.900268] Bluetooth: RFCOMM socket layer initialized
[  101.900279] Bluetooth: RFCOMM ver 1.11
[  136.422049] wlo1: authenticate with 32:90:b1:2c:d7:f6
[  136.425266] wlo1: send auth to 32:90:b1:2c:d7:f6 (try 1/3)
[  136.432126] wlo1: authenticated
[  136.432342] wlo1: waiting for beacon from 32:90:b1:2c:d7:f6
[  136.440228] wlo1: associate with 32:90:b1:2c:d7:f6 (try 1/3)
[  136.449594] wlo1: RX AssocResp from 32:90:b1:2c:d7:f6 (capab=0x411 status=0 aid=1)
[  136.452480] wlo1: associated
[  136.639029] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[  391.777504] perf: interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
[  396.465136] ------------[ cut here ]------------
[  396.465160] workqueue: WQ_MEM_RECLAIM acpi_thermal_pm:acpi_thermal_check_fn is flushing !WQ_MEM_RECLAIM events:work_for_cpu_fn
[  396.465176] WARNING: CPU: 0 PID: 213 at kernel/workqueue.c:2619 check_flush_dependency+0x11c/0x140
[  396.465178] Modules linked in: ccm rfcomm nft_masq nft_objref nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter bpfilter cmac algif_hash algif_skcipher af_alg bnep nls_iso8859_1 ppdev iwldvm uvcvideo snd_hda_codec_hdmi snd_hda_codec_idt mac80211 videobuf2_vmalloc snd_hda_codec_generic videobuf2_memops videobuf2_v4l2 ledtrig_audio libarc4 videobuf2_common intel_powerclamp snd_hda_intel snd_intel_dspcfg coretemp snd_hda_codec snd_hda_core snd_hwdep joydev i915 videodev input_leds iwlwifi mc snd_pcm btusb kvm btrtl btbcm snd_timer btintel intel_cstate serio_raw drm_kms_helper cfg80211 mei_me mei parport_pc bluetooth snd
[  396.465281]  ecdh_generic ecc mac_hid hp_wmi sparse_keymap i2c_algo_bit hp_accel parport wmi_bmof fb_sys_fops syscopyarea lis3lv02d soundcore tpm_infineon sysfillrect input_polldev sysimgblt intel_ips sch_fq_codel ipmi_devintf ipmi_msghandler msr drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ahci sky2 libahci lpc_ich psmouse wmi video
[  396.465344] CPU: 0 PID: 213 Comm: kworker/0:1H Not tainted 5.4.0-121-generic #137-Ubuntu
[  396.465346] Hardware name: Hewlett-Packard HP ProBook 6540b/1722, BIOS 68CDD Ver. F.04 01/27/2010
[  396.465358] Workqueue: acpi_thermal_pm acpi_thermal_check_fn
[  396.465365] RIP: 0010:check_flush_dependency+0x11c/0x140
[  396.465370] Code: 8d 8b b0 00 00 00 48 8b 50 18 4d 89 e0 48 8d b1 b0 00 00 00 48 c7 c7 00 60 56 b9 4c 89 c9 c6 05 33 64 b5 01 01 e8 56 de 9c 00 <0f> 0b e9 07 ff ff ff 80 3d 21 64 b5 01 00 75 92 e9 3c ff ff ff 66
[  396.465372] RSP: 0018:ffffa54880463b98 EFLAGS: 00010082
[  396.465376] RAX: 0000000000000000 RBX: ffff945bb300ce00 RCX: 0000000000000000
[  396.465379] RDX: 0000000000000002 RSI: ffffffffba1a0692 RDI: 0000000000000046
[  396.465386] RBP: ffffa54880463bb8 R08: ffffffffba1a0620 R09: 0000000000000072
[  396.465388] R10: ffffffffba1a0a00 R11: 00000000ba1a0682 R12: ffffffffb82b6ab0
[  396.465391] R13: ffff945bb2ac9600 R14: 0000000000000001 R15: ffff945bb3cf5700
[  396.465395] FS:  0000000000000000(0000) GS:ffff945bb3c00000(0000) knlGS:0000000000000000
[  396.465397] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  396.465400] CR2: 0000563f3762c788 CR3: 000000013180a000 CR4: 00000000000006f0
[  396.465403] Call Trace:
[  396.465419]  __flush_work+0x97/0x1d0
[  396.465424]  ? insert_work+0x70/0x80
[  396.465429]  ? __queue_work+0x14c/0x3f0
[  396.465436]  work_on_cpu+0x69/0x90
[  396.465440]  ? __exit_umh+0xb0/0xb0
[  396.465450]  ? __acpi_processor_get_throttling+0x20/0x20
[  396.465456]  __acpi_processor_set_throttling+0x1a1/0x2e0
[  396.465463]  acpi_processor_set_throttling+0x13/0x20
[  396.465468]  processor_set_cur_state+0xf6/0x110
[  396.465474]  thermal_cdev_update+0x9f/0x190
[  396.465483]  step_wise_throttle+0x52/0x90
[  396.465490]  handle_thermal_trip+0x7d/0x1c0
[  396.465495]  thermal_zone_device_update.part.0+0x6a/0x190
[  396.465501]  thermal_zone_device_update+0x26/0x30
[  396.465506]  acpi_thermal_check_fn.part.0+0x33/0x50
[  396.465516]  acpi_thermal_check_fn+0x16/0x20
[  396.465521]  process_one_work+0x1eb/0x3b0
[  396.465526]  worker_thread+0x4d/0x400
[  396.465533]  kthread+0x104/0x140
[  396.465538]  ? process_one_work+0x3b0/0x3b0
[  396.465542]  ? kthread_park+0x90/0x90
[  396.465555]  ret_from_fork+0x35/0x40
[  396.465560] ---[ end trace 6e3d653a993ffab1 ]---

domirock · Le 06/07/2022, à 21:28

FrancisFDZ a écrit :

Lors du démontage justifié pour un dépoussiérage efficace, on peut toujours noter les références de la ram et du disque pour un éventuel "hard upgrade" proposé en #7

Je note.
Merci :-)

Coeur Noir · Le 07/07/2022, à 00:44

Comme tu l'as vu, la réponse de dmesg est plutôt longue, c'est pour ça que je proposai un premier « tri » qui n'en montrerait que les lignes contenant des avertissements ou des erreurs :

sudo dmesg | grep -Ei "erro|warn"

( à première vue, vite fait, dans le tas, rien de dingue - à part les références à TPM Chip peut-être ? )

FrancisFDZ · Le 07/07/2022, à 07:43

L'hypothèse d'un ralentissement consécutif à une surchauffe causée par une accumulation de poussière me semble parfaitement logique et facile à résoudre, il va donc falloir d'abord effectuer ce nettoyage avant de poursuivre.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 05/07/2022, à 23:46

Xubuntu, TRES lent

#2 Le 06/07/2022, à 02:13

Re : Xubuntu, TRES lent

#3 Le 06/07/2022, à 07:03

Re : Xubuntu, TRES lent

#4 Le 06/07/2022, à 08:24

Re : Xubuntu, TRES lent

#5 Le 06/07/2022, à 08:37

Re : Xubuntu, TRES lent

#6 Le 06/07/2022, à 08:52

Re : Xubuntu, TRES lent

#7 Le 06/07/2022, à 09:08

Re : Xubuntu, TRES lent

#8 Le 06/07/2022, à 09:16

Re : Xubuntu, TRES lent

#9 Le 06/07/2022, à 10:03

Re : Xubuntu, TRES lent

#10 Le 06/07/2022, à 11:51

Re : Xubuntu, TRES lent

#11 Le 06/07/2022, à 12:06

Re : Xubuntu, TRES lent

#12 Le 06/07/2022, à 12:21

Re : Xubuntu, TRES lent

#13 Le 06/07/2022, à 12:47

Re : Xubuntu, TRES lent

#14 Le 06/07/2022, à 13:12

Re : Xubuntu, TRES lent

#15 Le 06/07/2022, à 13:30

Re : Xubuntu, TRES lent

#16 Le 06/07/2022, à 13:35

Re : Xubuntu, TRES lent

#17 Le 06/07/2022, à 16:03

Re : Xubuntu, TRES lent

#18 Le 06/07/2022, à 18:02

Re : Xubuntu, TRES lent

#19 Le 06/07/2022, à 18:05

Re : Xubuntu, TRES lent

#20 Le 06/07/2022, à 18:06

Re : Xubuntu, TRES lent

#21 Le 06/07/2022, à 21:24

Re : Xubuntu, TRES lent

#22 Le 06/07/2022, à 21:28

Re : Xubuntu, TRES lent

#23 Le 07/07/2022, à 00:44

Re : Xubuntu, TRES lent

#24 Le 07/07/2022, à 07:43

Re : Xubuntu, TRES lent

Pied de page des forums