#1 Le 14/07/2022, à 08:16
- centaure222
démarrage xubuntu tres long [résolu]
bonjour,
suite à des posts précédents pour le même sujet et qui avaient été solutionnés, je constate à nouveau des lenteur au démarrage (peut-être depuis des màj mais sans certitude)
donc mandb / daily upgrade / logrotate sont la cause
j'avais posté pour logrotate mais sans réponse
merci à tous
systemd-analyze time
Startup finished in 3.779s (firmware) + 4.916s (loader) + 7.460s (kernel) + 59.520s (userspace) = 1min 15.676s
graphical.target reached after 59.508s in userspacesystemd-analyze blame
1min 56.207s man-db.service
1min 46.328s apt-daily-upgrade.service
1min 42.644s logrotate.service
34.142s ua-timer.service
30.866s blueman-mechanism.service
25.812s snapd.service
21.346s networkd-dispatcher.service
20.375s dev-sda2.device
19.776s udisks2.service
18.183s accounts-daemon.service
16.066s gpu-manager.service
13.642s polkit.service
12.658s avahi-daemon.service
12.402s NetworkManager.service
12.125s dev-loop7.device
11.288s switcheroo-control.service
11.267s dev-loop15.device
11.196s thermald.service
11.191s systemd-logind.service
11.171s dev-loop8.device
11.167s dev-loop19.device
11.087s wpa_supplicant.service
10.975s dev-loop9.device
Dernière modification par centaure222 (Le 19/07/2022, à 20:50)
Hors ligne
#2 Le 14/07/2022, à 08:20
- xubu1957
Re : démarrage xubuntu tres long [résolu]
Bonjour,
Tu devais continuer sur ton fil > à nouveau des lenteurs au démarrage.
Voir règles du forum > balises BB code
Balise CODE :
C'est la balise à utiliser pour donner de longs messages d'erreurs, des contenus de fichiers de configuration, des commandes à taper, etc … Elle permet des messages plus "compacts", et est moins ambiguë que d'autres polices sur certains caractères.
Fournis les noyaux présents :
echo; dpkg -l | awk '!/^rc/ && / linux-(c|g|h|i|lo|m|si|t)/{print $1,$2,$3,$4 | "sort -k3V | column -t"}' ; echo -e "\nNoyau courant : $(uname -mr)"dpkg -l | grep -v ^iiet :
df -ThMontre aussi :
systemctl status logrotate.serviceDernière modification par xubu1957 (Le 14/07/2022, à 08:31)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#3 Le 14/07/2022, à 09:06
- centaure222
Re : démarrage xubuntu tres long [résolu]
dans l'ordre demandé...
ii linux-headers-5.4.0-121 5.4.0-121.137 all
ii linux-headers-5.4.0-121-generic 5.4.0-121.137 amd64
ii linux-image-5.4.0-121-generic 5.4.0-121.137 amd64
ii linux-modules-5.4.0-121-generic 5.4.0-121.137 amd64
ii linux-modules-extra-5.4.0-121-generic 5.4.0-121.137 amd64
ii linux-headers-5.4.0-122 5.4.0-122.138 all
ii linux-headers-5.4.0-122-generic 5.4.0-122.138 amd64
ii linux-image-5.4.0-122-generic 5.4.0-122.138 amd64
ii linux-modules-5.4.0-122-generic 5.4.0-122.138 amd64
ii linux-modules-extra-5.4.0-122-generic 5.4.0-122.138 amd64
ii linux-generic 5.4.0.122.123 amd64
ii linux-headers-generic 5.4.0.122.123 amd64
ii linux-image-generic 5.4.0.122.123 amd64
Noyau courant : 5.4.0-122-generic x86_64Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom Version Architecture Description
+++-=============================================-====================================-============-======================================================================================================Sys. de fichiers Type Taille Utilisé Dispo Uti% Monté sur
udev devtmpfs 3,9G 0 3,9G 0% /dev
tmpfs tmpfs 785M 1,7M 783M 1% /run
/dev/sda2 ext4 687G 17G 635G 3% /
tmpfs tmpfs 3,9G 0 3,9G 0% /dev/shm
tmpfs tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs tmpfs 3,9G 0 3,9G 0% /sys/fs/cgroup
/dev/loop1 squashfs 128K 128K 0 100% /snap/bare/5
/dev/loop0 squashfs 56M 56M 0 100% /snap/core18/2344
/dev/loop4 squashfs 62M 62M 0 100% /snap/core20/1518
/dev/loop5 squashfs 71M 71M 0 100% /snap/core22/165
/dev/loop7 squashfs 71M 71M 0 100% /snap/core22/188
/dev/loop3 squashfs 62M 62M 0 100% /snap/core20/1494
/dev/loop8 squashfs 219M 219M 0 100% /snap/gnome-3-34-1804/77
/dev/loop9 squashfs 401M 401M 0 100% /snap/gnome-3-38-2004/112
/dev/loop6 squashfs 165M 165M 0 100% /snap/gnome-3-28-1804/161
/dev/loop10 squashfs 82M 82M 0 100% /snap/gtk-common-themes/1534
/dev/loop11 squashfs 255M 255M 0 100% /snap/gnome-3-38-2004/106
/dev/loop16 squashfs 47M 47M 0 100% /snap/snapd/16292
/dev/loop13 squashfs 55M 55M 0 100% /snap/snap-store/558
/dev/loop14 squashfs 92M 92M 0 100% /snap/gtk-common-themes/1535
/dev/loop15 squashfs 170M 170M 0 100% /snap/spotify/58
/dev/loop18 squashfs 9,7M 9,7M 0 100% /snap/htop/3414
/dev/loop19 squashfs 170M 170M 0 100% /snap/spotify/60
/dev/loop2 squashfs 56M 56M 0 100% /snap/core18/2409
/dev/loop17 squashfs 47M 47M 0 100% /snap/snapd/16010
/dev/loop12 squashfs 9,7M 9,7M 0 100% /snap/htop/3417
/dev/sda1 vfat 511M 5,3M 506M 2% /boot/efi
tmpfs tmpfs 785M 52K 785M 1% /run/user/1000
[code]● logrotate.service - Rotate log files
Loaded: loaded (/lib/systemd/system/logrotate.service; static; vendor pres>
Active: failed (Result: exit-code) since Thu 2022-07-14 07:38:28 CEST; 1h >
TriggeredBy: ● logrotate.timer
Docs: man:logrotate(8)
man:logrotate.conf(5)
Process: 11967 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exit>
Main PID: 11967 (code=exited, status=1/FAILURE)
juil. 14 07:36:45 jacky systemd[1]: Starting Rotate log files...
juil. 14 07:38:26 jacky logrotate[11967]: error: Compressing program wrote foll>
juil. 14 07:38:26 jacky logrotate[11967]: gzip: stdin: Input/output error
juil. 14 07:38:27 jacky logrotate[11967]: error: failed to compress log /var/lo>
juil. 14 07:38:28 jacky systemd[1]: logrotate.service: Main process exited, cod>
juil. 14 07:38:28 jacky systemd[1]: logrotate.service: Failed with result 'exit>
juil. 14 07:38:28 jacky systemd[1]: Failed to start Rotate log files.
[/code]Hors ligne
#4 Le 14/07/2022, à 09:09
- centaure222
Re : démarrage xubuntu tres long [résolu]
merci XUBU1957 pour la prise en charge et desolé de ne pas avoir pousuivi sur mon vieux fil mais comme il date de Décembre , je pensais qu'il était aux oubliettes:)
Hors ligne
#5 Le 14/07/2022, à 09:12
- xubu1957
Re : démarrage xubuntu tres long [résolu]
df -Thnon fourni.
Montre aussi :
snap list --allPour finir de rajouter les balises code à ton précédent message #1 :
Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message
Dernière modification par xubu1957 (Le 14/07/2022, à 09:15)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#6 Le 14/07/2022, à 09:15
- centaure222
Re : démarrage xubuntu tres long [résolu]
Sys. de fichiers Type Taille Utilisé Dispo Uti% Monté sur
udev devtmpfs 3,9G 0 3,9G 0% /dev
tmpfs tmpfs 785M 1,7M 783M 1% /run
/dev/sda2 ext4 687G 17G 635G 3% /
tmpfs tmpfs 3,9G 0 3,9G 0% /dev/shm
tmpfs tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs tmpfs 3,9G 0 3,9G 0% /sys/fs/cgroup
/dev/loop1 squashfs 128K 128K 0 100% /snap/bare/5
/dev/loop0 squashfs 56M 56M 0 100% /snap/core18/2344
/dev/loop4 squashfs 62M 62M 0 100% /snap/core20/1518
/dev/loop5 squashfs 71M 71M 0 100% /snap/core22/165
/dev/loop7 squashfs 71M 71M 0 100% /snap/core22/188
/dev/loop3 squashfs 62M 62M 0 100% /snap/core20/1494
/dev/loop8 squashfs 219M 219M 0 100% /snap/gnome-3-34-1804/77
/dev/loop9 squashfs 401M 401M 0 100% /snap/gnome-3-38-2004/112
/dev/loop6 squashfs 165M 165M 0 100% /snap/gnome-3-28-1804/161
/dev/loop10 squashfs 82M 82M 0 100% /snap/gtk-common-themes/1534
/dev/loop11 squashfs 255M 255M 0 100% /snap/gnome-3-38-2004/106
/dev/loop16 squashfs 47M 47M 0 100% /snap/snapd/16292
/dev/loop13 squashfs 55M 55M 0 100% /snap/snap-store/558
/dev/loop14 squashfs 92M 92M 0 100% /snap/gtk-common-themes/1535
/dev/loop15 squashfs 170M 170M 0 100% /snap/spotify/58
/dev/loop18 squashfs 9,7M 9,7M 0 100% /snap/htop/3414
/dev/loop19 squashfs 170M 170M 0 100% /snap/spotify/60
/dev/loop2 squashfs 56M 56M 0 100% /snap/core18/2409
/dev/loop17 squashfs 47M 47M 0 100% /snap/snapd/16010
/dev/loop12 squashfs 9,7M 9,7M 0 100% /snap/htop/3417
/dev/sda1 vfat 511M 5,3M 506M 2% /boot/efi
tmpfs tmpfs 785M 52K 785M 1% /run/user/1000om Version Révision Suivi Éditeur Notes
bare 1.0 5 latest/stable canonical✓ base
core18 20220428 2409 latest/stable canonical✓ base
core18 20220309 2344 latest/stable canonical✓ base,désactivé
core20 20220527 1518 latest/stable canonical✓ base
core20 20220512 1494 latest/stable canonical✓ base,désactivé
core22 20220425 165 latest/stable canonical✓ base,désactivé
core22 20220607 188 latest/stable canonical✓ base
gnome-3-28-1804 3.28.0-19-g98f9e67.98f9e67 161 latest/stable canonical✓ -
gnome-3-34-1804 0+git.3556cb3 77 latest/stable canonical✓ -
gnome-3-38-2004 0+git.09fbd6c 106 latest/stable canonical✓ désactivé
gnome-3-38-2004 0+git.891e5bc 112 latest/stable canonical✓ -
gtk-common-themes 0.1-81-g442e511 1535 latest/stable canonical✓ -
gtk-common-themes 0.1-79-ga83e90c 1534 latest/stable canonical✓ désactivé
htop 3.2.1 3414 latest/stable maxiberta désactivé
htop 3.2.1 3417 latest/stable maxiberta -
snap-store 3.38.0-66-gbd5b8f7 558 latest/stable/… canonical✓ -
snapd 2.56.2 16292 latest/stable canonical✓ snapd
snapd 2.56 16010 latest/stable canonical✓ snapd,désactivé
spotify 1.1.84.716.gc5f8b819 60 latest/stable spotify✓ -
spotify 1.1.80.699.gc3dac750 58 latest/stable spotify✓ désactivéHors ligne
#7 Le 14/07/2022, à 09:18
- xubu1957
Re : démarrage xubuntu tres long [résolu]
Tu devrais donner les retours avec la commande d'origine :
Le 29/03/2018, moko138 a écrit :
Un retour complet doit contenir toutes les lignes,
depuis celle, entière, de la commande
jusqu'à la ligne attendant la commande suivante, exemple :moi@mon-pc~$: ma-commande son retour moi@mon-pc~$:Faute de quoi, il manque souvent à ceux qui tentent de t'aider des éléments essentiels.
(Plus de détails dans ce message-ci Retour utilisable de commande.)
Et si tu ne veux pas divulguer ton nom d'user, tu le remplaces par "toto" ou ce que tu veux.
Pour nettoyer les snaps désactivés, tu as cette commande de nany :
snap list --all | awk '/désactivé|disabled/{print $1, $3}' | while read snapname revision; do sudo snap remove "$snapname" --revision="$revision"; doneCommande stockée au post #7 > |RESOLU] snap nettoyage des versions désactivées.
Les snaps ralentissent le démarrage du système.
Dernière modification par xubu1957 (Le 14/07/2022, à 09:19)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#8 Le 14/07/2022, à 09:20
- centaure222
Re : démarrage xubuntu tres long [résolu]
et le #3 en bonne forme
systemd-analyze blame
1min 56.207s man-db.service
1min 46.328s apt-daily-upgrade.service
1min 42.644s logrotate.service
34.142s ua-timer.service
30.866s blueman-mechanism.service
25.812s snapd.service
21.346s networkd-dispatcher.service
20.375s dev-sda2.device
19.776s udisks2.service
18.183s accounts-daemon.service
16.066s gpu-manager.service
13.642s polkit.service
12.658s avahi-daemon.service
12.402s NetworkManager.service
12.125s dev-loop7.device
11.288s switcheroo-control.service
11.267s dev-loop15.device
11.196s thermald.service
11.191s systemd-logind.service
11.171s dev-loop8.device
11.167s dev-loop19.device
11.087s wpa_supplicant.service
10.975s dev-loop9.deviceHors ligne
#9 Le 14/07/2022, à 09:22
- centaure222
Re : démarrage xubuntu tres long [résolu]
jacky@jacky:~$ snap list --all | awk '/désactivé|disabled/{print $1, $3}' | while read snapname revision; do sudo snap remove "$snapname" --revision="$revision"; done
[sudo] Mot de passe de jacky :
core18 (révision 2344) supprimé
core20 (révision 1494) supprimé
core22 (révision 165) supprimé
gnome-3-38-2004 (révision 106) supprimé
gtk-common-themes (révision 1534) supprimé
htop (révision 3414) supprimé
snapd (révision 16010) supprimé
spotify (révision 58) suppriméHors ligne
#10 Le 14/07/2022, à 09:24
- centaure222
Re : démarrage xubuntu tres long [résolu]
mais il reste toujours les 3 gros morceaux:
1min 56.207s man-db.service
1min 46.328s apt-daily-upgrade.service
1min 42.644s logrotate.service
Hors ligne
#11 Le 14/07/2022, à 09:27
- xubu1957
Re : démarrage xubuntu tres long [résolu]
Pour :
1min 42.644s logrotate.service Je ne suis pas apte à répondre pour ce type de retour. (bis)
Tu as un serveur ?
Dernière modification par xubu1957 (Le 14/07/2022, à 09:28)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#12 Le 14/07/2022, à 09:34
- centaure222
Re : démarrage xubuntu tres long [résolu]
non ni NAS ni serveur
Hors ligne
#13 Le 14/07/2022, à 09:35
- nany
Re : démarrage xubuntu tres long [résolu]
Bonjour,
centaure222 a écrit :
+ 59.520s (userspace)
Existe-t-il un fichier resume ? Donne le retour de :
cat /etc/initramfs-tools/conf.d/resumeHors ligne
#14 Le 14/07/2022, à 09:36
- centaure222
Re : démarrage xubuntu tres long [résolu]
tu auras noté que pour mon post precedent, personne ne m'a répondu pour logrotate.service
Hors ligne
#15 Le 14/07/2022, à 09:38
- centaure222
Re : démarrage xubuntu tres long [résolu]
bonjour NANY
jacky@jacky:~$ cat /etc/initramfs-tools/conf.d/resume
cat: /etc/initramfs-tools/conf.d/resume: Aucun fichier ou dossier de ce type
jacky@jacky:~$ Hors ligne
#16 Le 14/07/2022, à 09:48
- nany
Re : démarrage xubuntu tres long [résolu]
Fausse piste. 
Donne alors le retour de :
sudo dmesg | head -1000Hors ligne
#17 Le 14/07/2022, à 09:54
- centaure222
Re : démarrage xubuntu tres long [résolu]
tu as de a lecture
d Intr-remapping.
[ 0.068566] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.068566] x2apic enabled
[ 0.068573] Switched APIC routing to cluster x2apic.
[ 0.068941] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088145] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2284184e2eb, max_idle_ns: 440795311662 ns
[ 0.088148] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.09 BogoMIPS (lpj=9578188)
[ 0.088150] pid_max: default: 32768 minimum: 301
[ 0.091969] LSM: Security Framework initializing
[ 0.091977] Yama: becoming mindful.
[ 0.092013] AppArmor: AppArmor initialized
[ 0.092051] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.092068] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.092081] *** VALIDATE tmpfs ***
[ 0.092203] *** VALIDATE proc ***
[ 0.092246] *** VALIDATE cgroup1 ***
[ 0.092247] *** VALIDATE cgroup2 ***
[ 0.092293] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.092305] process: using mwait in idle threads
[ 0.092307] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.092308] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.092310] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.092311] Spectre V2 : Mitigation: Retpolines
[ 0.092311] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.092312] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.092312] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.092313] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.092314] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.092316] MDS: Mitigation: Clear CPU buffers
[ 0.092317] SRBDS: Mitigation: Microcode
[ 0.092460] Freeing SMP alternatives memory: 40K
[ 0.094545] smpboot: CPU0: Intel(R) Core(TM) i7-4700HQ CPU @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.094638] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.094651] ... version: 3
[ 0.094651] ... bit width: 48
[ 0.094651] ... generic registers: 4
[ 0.094652] ... value mask: 0000ffffffffffff
[ 0.094652] ... max period: 00007fffffffffff
[ 0.094652] ... fixed-purpose events: 3
[ 0.094653] ... event mask: 000000070000000f
[ 0.094680] rcu: Hierarchical SRCU implementation.
[ 0.095534] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.095600] smp: Bringing up secondary CPUs ...
[ 0.095668] x86: Booting SMP configuration:
[ 0.095669] .... node #0, CPUs: #1 #2 #3 #4
[ 0.097666] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.097666] #5 #6 #7
[ 0.100361] smp: Brought up 1 node, 8 CPUs
[ 0.100361] smpboot: Max logical packages: 1
[ 0.100361] smpboot: Total of 8 processors activated (38312.75 BogoMIPS)
[ 0.102818] devtmpfs: initialized
[ 0.102818] x86/mm: Memory block size: 128MB
[ 0.102818] PM: Registering ACPI NVS region [mem 0xba470000-0xba476fff] (28672 bytes)
[ 0.102818] PM: Registering ACPI NVS region [mem 0xc946e000-0xc9afefff] (6885376 bytes)
[ 0.102818] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.104154] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.104194] pinctrl core: initialized pinctrl subsystem
[ 0.104268] PM: RTC time: 17:20:35, date: 2022-07-13
[ 0.104353] NET: Registered protocol family 16
[ 0.104417] audit: initializing netlink subsys (disabled)
[ 0.104421] audit: type=2000 audit(1657732835.036:1): state=initialized audit_enabled=0 res=1
[ 0.104421] EISA bus registered
[ 0.104421] cpuidle: using governor ladder
[ 0.104421] cpuidle: using governor menu
[ 0.104421] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.104421] ACPI: bus type PCI registered
[ 0.104421] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.104421] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.104421] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.104421] PCI: Using configuration type 1 for base access
[ 0.104421] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.104647] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.105251] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.105251] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.105251] ACPI: Added _OSI(Module Device)
[ 0.105251] ACPI: Added _OSI(Processor Device)
[ 0.105251] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.105251] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.105251] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.105251] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.105251] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.121003] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.121659] ACPI: EC: EC started
[ 0.121659] ACPI: EC: interrupt blocked
[ 0.122614] ACPI: \: Used as first EC
[ 0.122616] ACPI: \: GPE=0x1d, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.122616] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.123286] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.124071] ACPI: Dynamic OEM Table Load:
[ 0.124075] ACPI: SSDT 0xFFFF9B3F2580E000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.125092] ACPI: Dynamic OEM Table Load:
[ 0.125096] ACPI: SSDT 0xFFFF9B3F259B3000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.126158] ACPI: Dynamic OEM Table Load:
[ 0.126160] ACPI: SSDT 0xFFFF9B3F259F5800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.128428] ACPI: Interpreter enabled
[ 0.128454] ACPI: (supports S0 S3 S4 S5)
[ 0.128455] ACPI: Using IOAPIC for interrupt routing
[ 0.128481] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.128734] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.136399] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.136404] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.136665] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.136835] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.136835] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.137246] PCI host bridge to bus 0000:00
[ 0.137248] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.137249] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.137249] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.137250] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.137251] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.137251] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.137252] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.137253] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[ 0.137254] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.137261] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.137332] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.137366] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.137478] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.137486] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.137491] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.137494] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.137503] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.137599] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.137606] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
[ 0.137694] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.137713] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.137766] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.137830] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.137849] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1e000-0xf7a1e00f 64bit]
[ 0.137904] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.137967] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.137987] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
[ 0.138060] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.138128] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.138144] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[ 0.138199] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.138266] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.138338] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.138452] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.138523] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.138633] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.138704] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.138817] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.138837] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
[ 0.138912] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.138982] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[ 0.139140] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.139155] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.139161] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.139167] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.139173] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.139179] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.139186] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
[ 0.139218] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.139278] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.139295] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
[ 0.139312] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.139415] pci 0000:01:00.0: [10de:1292] type 00 class 0x030200
[ 0.139429] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.139437] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.139445] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.139451] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.139456] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.139468] pci 0000:01:00.0: Enabling HDA controller
[ 0.139509] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 0.139583] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.139584] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.139586] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.139588] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.139641] acpiphp: Slot [1] registered
[ 0.139646] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.139717] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[ 0.139747] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit]
[ 0.139782] pci 0000:03:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref]
[ 0.139855] pci 0000:03:00.0: supports D1 D2
[ 0.139856] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.139954] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.139958] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.140028] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.140056] pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.140082] pci 0000:04:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit]
[ 0.140099] pci 0000:04:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.140197] pci 0000:04:00.0: supports D1 D2
[ 0.140198] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.140307] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.140310] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.140313] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.140317] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.152366] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.152434] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.152501] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[ 0.152567] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[ 0.152633] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.152699] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.152765] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 0.152831] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 0.153405] ACPI: EC: interrupt unblocked
[ 0.153406] ACPI: EC: event unblocked
[ 0.153413] ACPI: \_SB_.PCI0.LPCB.HEC_: GPE=0x1d, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.153414] ACPI: \_SB_.PCI0.LPCB.HEC_: Boot DSDT EC used to handle transactions and events
[ 0.153497] iommu: Default domain type: Translated
[ 0.153497] SCSI subsystem initialized
[ 0.153497] libata version 3.00 loaded.
[ 0.153497] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.153497] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.153497] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.153497] vgaarb: loaded
[ 0.153497] ACPI: bus type USB registered
[ 0.153497] usbcore: registered new interface driver usbfs
[ 0.153497] usbcore: registered new interface driver hub
[ 0.153497] usbcore: registered new device driver usb
[ 0.153497] pps_core: LinuxPPS API ver. 1 registered
[ 0.153497] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.153497] PTP clock support registered
[ 0.153497] EDAC MC: Ver: 3.0.0
[ 0.153497] Registered efivars operations
[ 0.153497] PCI: Using ACPI for IRQ routing
[ 0.153497] PCI: pci_cache_line_size set to 64 bytes
[ 0.153497] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.153497] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.153497] e820: reserve RAM buffer [mem 0xba01e018-0xbbffffff]
[ 0.153497] e820: reserve RAM buffer [mem 0xba02c018-0xbbffffff]
[ 0.153497] e820: reserve RAM buffer [mem 0xba03d018-0xbbffffff]
[ 0.153497] e820: reserve RAM buffer [mem 0xba470000-0xbbffffff]
[ 0.153497] e820: reserve RAM buffer [mem 0xba8a0000-0xbbffffff]
[ 0.153497] e820: reserve RAM buffer [mem 0xc8241000-0xcbffffff]
[ 0.153497] e820: reserve RAM buffer [mem 0xc923e000-0xcbffffff]
[ 0.153497] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
[ 0.153497] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[ 0.153526] NetLabel: Initializing
[ 0.153527] NetLabel: domain hash size = 128
[ 0.153527] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.153537] NetLabel: unlabeled traffic allowed by default
[ 0.153547] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.153547] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.157171] clocksource: Switched to clocksource tsc-early
[ 0.165595] *** VALIDATE bpf ***
[ 0.165642] VFS: Disk quotas dquot_6.6.0
[ 0.165656] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.165675] *** VALIDATE ramfs ***
[ 0.165678] *** VALIDATE hugetlbfs ***
[ 0.165744] AppArmor: AppArmor Filesystem Enabled
[ 0.165765] pnp: PnP ACPI init
[ 0.166017] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.166019] system 00:00: [io 0xffff] has been reserved
[ 0.166020] system 00:00: [io 0xffff] has been reserved
[ 0.166021] system 00:00: [io 0xffff] has been reserved
[ 0.166021] system 00:00: [io 0x1c00-0x1cfe] has been reserved
[ 0.166022] system 00:00: [io 0x1d00-0x1dfe] has been reserved
[ 0.166023] system 00:00: [io 0x1e00-0x1efe] has been reserved
[ 0.166024] system 00:00: [io 0x1f00-0x1ffe] has been reserved
[ 0.166025] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.166026] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.166029] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166048] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.166094] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.166097] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.166140] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.166142] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166210] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.166213] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166277] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.166278] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.166279] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.166281] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166334] pnp 00:06: Plug and Play ACPI device, IDs ETD0108 PNP0f13 (active)
[ 0.166368] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNPc030 PNP0303 (active)
[ 0.166394] system 00:08: [io 0x0240-0x0259] has been reserved
[ 0.166396] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166796] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.166797] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.166798] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.166799] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.166800] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.166801] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.166802] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.166803] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.166804] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.166805] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.166806] system 00:09: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.166807] system 00:09: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.166809] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176427] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.176429] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.176432] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.176708] pnp: PnP ACPI: found 11 devices
[ 0.177885] thermal_sys: Registered thermal governor 'fair_share'
[ 0.177885] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.177886] thermal_sys: Registered thermal governor 'step_wise'
[ 0.177887] thermal_sys: Registered thermal governor 'user_space'
[ 0.177887] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.182380] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.182404] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.182405] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.182407] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.182412] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
[ 0.182416] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
[ 0.182418] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.182420] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.182421] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.182423] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.182425] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.182428] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.182430] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.182434] pci 0000:00:1c.0: bridge window [mem 0xcf200000-0xcf3fffff]
[ 0.182436] pci 0000:00:1c.0: bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
[ 0.182441] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.182445] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.182451] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.182453] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.182457] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.182459] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.182465] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.182466] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.182466] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.182467] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.182468] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.182469] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.182469] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.182470] pci_bus 0000:00: resource 11 [mem 0xcf200000-0xfeafffff window]
[ 0.182471] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.182472] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.182472] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.182473] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.182474] pci_bus 0000:02: resource 1 [mem 0xcf200000-0xcf3fffff]
[ 0.182475] pci_bus 0000:02: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
[ 0.182476] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.182476] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.182477] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.182478] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.182579] NET: Registered protocol family 2
[ 0.182650] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.183506] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.183541] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.183640] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.183743] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.183772] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.183791] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.183824] NET: Registered protocol family 1
[ 0.183827] NET: Registered protocol family 44
[ 0.183836] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.184284] PCI: CLS 64 bytes, default 64
[ 0.184316] Trying to unpack rootfs image as initramfs...
[ 0.279452] Freeing initrd memory: 51564K
[ 0.296179] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.296181] software IO TLB: mapped [mem 0xb601e000-0xba01e000] (64MB)
[ 0.296454] check: Scanning for low memory corruption every 60 seconds
[ 0.296878] Initialise system trusted keyrings
[ 0.296890] Key type blacklist registered
[ 0.296919] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.298132] zbud: loaded
[ 0.298392] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.298504] fuse: init (API version 7.31)
[ 0.298515] *** VALIDATE fuse ***
[ 0.298516] *** VALIDATE fuse ***
[ 0.298586] Platform Keyring initialized
[ 0.301855] Key type asymmetric registered
[ 0.301856] Asymmetric key parser 'x509' registered
[ 0.301862] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.301883] io scheduler mq-deadline registered
[ 0.302548] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.302585] efifb: probing for efifb
[ 0.302597] efifb: No BGRT, not showing boot graphics
[ 0.302598] efifb: framebuffer at 0xd0000000, using 1876k, total 1875k
[ 0.302598] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.302599] efifb: scrolling: redraw
[ 0.302599] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.302629] fbcon: Deferring console take-over
[ 0.302629] fb0: EFI VGA frame buffer device
[ 0.302634] intel_idle: MWAIT substates: 0x42120
[ 0.302635] intel_idle: v0.4.1 model 0x3C
[ 0.302910] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.303078] ACPI: AC Adapter [AC0] (on-line)
[ 0.303133] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.303157] ACPI: Lid Switch [LID]
[ 0.303177] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.303194] ACPI: Sleep Button [SLPB]
[ 0.303214] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.303227] ACPI: Power Button [PWRF]
[ 0.304107] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.304108] ACPI: Thermal Zone [THRM] (67 C)
[ 0.304261] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.305525] Linux agpgart interface v0.103
[ 0.364464] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x20) (20190816/exoparg2-393)
[ 0.364474]
Initialized Local Variables for Method [BIF9]:
[ 0.364475] Local0: 0000000060545197 <Obj> Package 0000000060545197
[ 0.364480] No Arguments are initialized for method [BIF9]
[ 0.364482] ACPI Error: Aborting method \_SB.PCI0.LPCB.HEC.BIF9 due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.364489] ACPI Error: Aborting method \_SB.PCI0.BAT0._BIF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.364496] ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _BIF (20190816/battery-556)
[ 0.452459] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x20) (20190816/exoparg2-393)
[ 0.452469]
Initialized Local Variables for Method [BIF9]:
[ 0.452470] Local0: 000000001d06e8ed <Obj> Package 000000001d06e8ed
[ 0.452475] No Arguments are initialized for method [BIF9]
[ 0.452477] ACPI Error: Aborting method \_SB.PCI0.LPCB.HEC.BIF9 due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.452484] ACPI Error: Aborting method \_SB.PCI0.BAT0._BIF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.452490] ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _BIF (20190816/battery-556)
[ 0.460232] loop: module loaded
[ 0.460557] tun: Universal TUN/TAP device driver, 1.6
[ 0.460673] PPP generic driver version 2.4.2
[ 0.460907] VFIO - User Level meta-driver version: 0.3
[ 0.461113] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.461124] ehci-pci: EHCI PCI platform driver
[ 0.461292] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.461297] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.461310] ehci-pci 0000:00:1a.0: debug port 2
[ 0.465203] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.465215] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000
[ 0.480207] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.480260] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.480262] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.480264] usb usb1: Product: EHCI Host Controller
[ 0.480266] usb usb1: Manufacturer: Linux 5.4.0-122-generic ehci_hcd
[ 0.480267] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.480451] hub 1-0:1.0: USB hub found
[ 0.480456] hub 1-0:1.0: 2 ports detected
[ 0.480701] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.480704] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.480714] ehci-pci 0000:00:1d.0: debug port 2
[ 0.484612] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.484620] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
[ 0.500206] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.500246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.500247] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.500248] usb usb2: Product: EHCI Host Controller
[ 0.500249] usb usb2: Manufacturer: Linux 5.4.0-122-generic ehci_hcd
[ 0.500250] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.500347] hub 2-0:1.0: USB hub found
[ 0.500351] hub 2-0:1.0: 2 ports detected
[ 0.500488] ehci-platform: EHCI generic platform driver
[ 0.500498] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.500501] ohci-pci: OHCI PCI platform driver
[ 0.500508] ohci-platform: OHCI generic platform driver
[ 0.500515] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.500633] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.500638] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.501684] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 0.501688] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.501816] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.501818] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.501820] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.501841] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.501842] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.501843] usb usb3: Product: xHCI Host Controller
[ 0.501844] usb usb3: Manufacturer: Linux 5.4.0-122-generic xhci-hcd
[ 0.501844] usb usb3: SerialNumber: 0000:00:14.0
[ 0.501907] hub 3-0:1.0: USB hub found
[ 0.501922] hub 3-0:1.0: 14 ports detected
[ 0.501963] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.501969]
Initialized Local Variables for Method [XPLD]:
[ 0.501970] Local0: 0000000045f52d10 <Obj> Integer 0000000000000001
[ 0.501973] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.501974] Arg0: 0000000089664ee3 <Obj> Integer 0000000000000000
[ 0.501977] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.501981] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS01._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502019] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502022]
Initialized Local Variables for Method [XPLD]:
[ 0.502023] Local0: 0000000068d8fa0c <Obj> Integer 0000000000000001
[ 0.502025] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502026] Arg0: 0000000000a989ad <Obj> Integer 0000000000000001
[ 0.502028] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502032] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS02._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502066] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502069]
Initialized Local Variables for Method [XPLD]:
[ 0.502069] Local0: 000000008fd92457 <Obj> Integer 0000000000000001
[ 0.502072] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502072] Arg0: 0000000089664ee3 <Obj> Integer 0000000000000002
[ 0.502075] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502078] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS03._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502111] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502114]
Initialized Local Variables for Method [XPLD]:
[ 0.502115] Local0: 000000003447e7aa <Obj> Integer 0000000000000000
[ 0.502117] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502117] Arg0: 0000000000a989ad <Obj> Integer 0000000000000003
[ 0.502120] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502123] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS04._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502155] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502158]
Initialized Local Variables for Method [XPLD]:
[ 0.502159] Local0: 000000005a757d69 <Obj> Integer 0000000000000000
[ 0.502161] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502161] Arg0: 0000000089664ee3 <Obj> Integer 0000000000000004
[ 0.502164] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502167] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS05._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502200] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502204]
Initialized Local Variables for Method [XPLD]:
[ 0.502204] Local0: 000000001ce2e169 <Obj> Integer 0000000000000000
[ 0.502206] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502207] Arg0: 0000000000a989ad <Obj> Integer 0000000000000005
[ 0.502209] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502213] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS06._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502247] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502251]
Initialized Local Variables for Method [XPLD]:
[ 0.502251] Local0: 00000000ec0601a4 <Obj> Integer 0000000000000000
[ 0.502253] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502254] Arg0: 0000000089664ee3 <Obj> Integer 0000000000000006
[ 0.502256] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502260] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS07._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502292] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502295]
Initialized Local Variables for Method [XPLD]:
[ 0.502296] Local0: 00000000dfcbc6e3 <Obj> Integer 0000000000000000
[ 0.502298] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502298] Arg0: 0000000000a989ad <Obj> Integer 0000000000000007
[ 0.502301] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502304] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS08._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502337] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502340]
Initialized Local Variables for Method [XPLD]:
[ 0.502340] Local0: 000000002cbc72b7 <Obj> Integer 0000000000000000
[ 0.502342] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502343] Arg0: 0000000089664ee3 <Obj> Integer 0000000000000008
[ 0.502345] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502349] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS09._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502382] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502385]
Initialized Local Variables for Method [XPLD]:
[ 0.502386] Local0: 00000000f9efc325 <Obj> Integer 0000000000000000
[ 0.502388] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502388] Arg0: 0000000000a989ad <Obj> Integer 0000000000000009
[ 0.502391] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502394] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS10._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502429] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502432]
Initialized Local Variables for Method [XPLD]:
[ 0.502433] Local0: 00000000812d8775 <Obj> Integer 0000000000000000
[ 0.502435] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502435] Arg0: 0000000089664ee3 <Obj> Integer 000000000000000A
[ 0.502438] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502441] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS11._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502473] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502476]
Initialized Local Variables for Method [XPLD]:
[ 0.502476] Local0: 00000000f1360d90 <Obj> Integer 0000000000000000
[ 0.502478] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502479] Arg0: 0000000000a989ad <Obj> Integer 000000000000000B
[ 0.502481] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502485] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS12._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502518] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502521]
Initialized Local Variables for Method [XPLD]:
[ 0.502522] Local0: 00000000858e8113 <Obj> Integer 0000000000000000
[ 0.502524] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502524] Arg0: 0000000089664ee3 <Obj> Integer 000000000000000C
[ 0.502527] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502530] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS13._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502563] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502566]
Initialized Local Variables for Method [XPLD]:
[ 0.502566] Local0: 00000000f8928a78 <Obj> Integer 0000000000000001
[ 0.502569] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502569] Arg0: 0000000000a989ad <Obj> Integer 000000000000000D
[ 0.502571] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502575] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS14._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502715] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.502716] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.502717] usb usb4: Product: xHCI Host Controller
[ 0.502718] usb usb4: Manufacturer: Linux 5.4.0-122-generic xhci-hcd
[ 0.502718] usb usb4: SerialNumber: 0000:00:14.0
[ 0.502780] hub 4-0:1.0: USB hub found
[ 0.502789] hub 4-0:1.0: 4 ports detected
[ 0.502823] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502827]
Initialized Local Variables for Method [XPLD]:
[ 0.502828] Local0: 0000000077d7decc <Obj> Integer 0000000000000001
[ 0.502830] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502831] Arg0: 0000000089664ee3 <Obj> Integer 000000000000000F
[ 0.502833] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502837] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SSP1._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502874] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502877]
Initialized Local Variables for Method [XPLD]:
[ 0.502877] Local0: 000000006c856164 <Obj> Integer 0000000000000001
[ 0.502880] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502880] Arg0: 0000000000a989ad <Obj> Integer 0000000000000010
[ 0.502883] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502886] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SSP2._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502921] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502924]
Initialized Local Variables for Method [XPLD]:
[ 0.502924] Local0: 0000000046134830 <Obj> Integer 0000000000000000
[ 0.502927] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502927] Arg0: 0000000089664ee3 <Obj> Integer 0000000000000011
[ 0.502930] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502933] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SSP3._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502967] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502971]
Initialized Local Variables for Method [XPLD]:
[ 0.502971] Local0: 00000000d338689f <Obj> Integer 0000000000000000
[ 0.502973] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502974] Arg0: 0000000000a989ad <Obj> Integer 0000000000000012
[ 0.502976] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502979] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SSP4._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.503066] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.506204] i8042: Detected active multiplexing controller, rev 1.1
[ 0.507445] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.507448] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.507467] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.507479] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.507491] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.507558] mousedev: PS/2 mouse device common for all mice
[ 0.507654] rtc_cmos 00:01: RTC can wake from S4
[ 0.507805] rtc_cmos 00:01: registered as rtc0
[ 0.507815] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.507820] i2c /dev entries driver
[ 0.507851] device-mapper: uevent: version 1.0.3
[ 0.507890] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.507902] platform eisa.0: Probing EISA bus 0
[ 0.507906] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.507907] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.507907] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.507908] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.507908] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.507909] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.507910] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.507910] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.507911] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.507912] platform eisa.0: EISA: Detected 0 cards
[ 0.507915] intel_pstate: Intel P-state driver initializing
[ 0.508615] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.508618] EFI Variables Facility v0.08 2004-May-17
[ 0.511994] drop_monitor: Initializing network drop monitor service
[ 0.512111] NET: Registered protocol family 10
[ 0.515142] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.518135] Segment Routing with IPv6
[ 0.518154] NET: Registered protocol family 17
[ 0.518242] Key type dns_resolver registered
[ 0.518679] RAS: Correctable Errors collector initialized.
[ 0.518713] microcode: sig=0x306c3, pf=0x20, revision=0x28
[ 0.518835] microcode: Microcode Update Driver: v2.2.
[ 0.518840] IPI shorthand broadcast: enabled
[ 0.518846] sched_clock: Marking stable (518582057, 250119)->(523261594, -4429418)
[ 0.518952] registered taskstats version 1
[ 0.518960] Loading compiled-in X.509 certificates
[ 0.519772] Loaded X.509 cert 'Build time autogenerated kernel key: 14c1fcd338762a2eeacd3b20a829b037b9235452'
[ 0.520445] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 0.521050] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 0.521051] blacklist: Loading compiled-in revocation X.509 certificates
[ 0.521065] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 0.521090] zswap: loaded using pool lzo/zbud
[ 0.521194] Key type ._fscrypt registered
[ 0.521195] Key type .fscrypt registered
[ 0.526000] Key type big_key registered
[ 0.528016] Key type encrypted registered
[ 0.528017] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.528262] integrity: Loading X.509 certificate: UEFI:db
[ 0.528494] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[ 0.528494] integrity: Loading X.509 certificate: UEFI:db
[ 0.528664] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[ 0.528664] integrity: Loading X.509 certificate: UEFI:db
[ 0.528682] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.528682] integrity: Loading X.509 certificate: UEFI:db
[ 0.528696] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.528696] integrity: Loading X.509 certificate: UEFI:db
[ 0.528869] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 0.529294] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[ 0.529521] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 0.529522] ima: No TPM chip found, activating TPM-bypass!
[ 0.529527] ima: Allocated hash algorithm: sha1
[ 0.529532] ima: No architecture policies found
[ 0.529540] evm: Initialising EVM extended attributes:
[ 0.529541] evm: security.selinux
[ 0.529541] evm: security.SMACK64
[ 0.529542] evm: security.SMACK64EXEC
[ 0.529542] evm: security.SMACK64TRANSMUTE
[ 0.529542] evm: security.SMACK64MMAP
[ 0.529543] evm: security.apparmor
[ 0.529543] evm: security.ima
[ 0.529544] evm: security.capability
[ 0.529544] evm: HMAC attrs: 0x1
[ 0.530173] PM: Magic number: 14:58:340
[ 0.530175] PM: hash matches drivers/base/power/main.c:1831
[ 0.530288] rtc_cmos 00:01: setting system clock to 2022-07-13T17:20:36 UTC (1657732836)
[ 0.542387] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 0.542390] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 0.544477] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x20) (20190816/exoparg2-393)
[ 0.544487]
Initialized Local Variables for Method [BIF9]:
[ 0.544488] Local0: 000000003388a6ab <Obj> Package 000000003388a6ab
[ 0.544492] No Arguments are initialized for method [BIF9]
[ 0.544495] ACPI Error: Aborting method \_SB.PCI0.LPCB.HEC.BIF9 due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.544502] ACPI Error: Aborting method \_SB.PCI0.BAT0._BIF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.544509] ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _BIF (20190816/battery-556)
[ 0.632460] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x20) (20190816/exoparg2-393)
[ 0.632469]
Initialized Local Variables for Method [BIF9]:
[ 0.632470] Local0: 00000000cc1a8e70 <Obj> Package 00000000cc1a8e70
[ 0.632475] No Arguments are initialized for method [BIF9]
[ 0.632477] ACPI Error: Aborting method \_SB.PCI0.LPCB.HEC.BIF9 due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.632484] ACPI Error: Aborting method \_SB.PCI0.BAT0._BIF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.632491] ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _BIF (20190816/battery-556)
[ 0.720458] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x20) (20190816/exoparg2-393)
[ 0.720467]
Initialized Local Variables for Method [BIF9]:
[ 0.720468] Local0: 0000000032fb6532 <Obj> Package 0000000032fb6532
[ 0.720473] No Arguments are initialized for method [BIF9]
[ 0.720475] ACPI Error: Aborting method \_SB.PCI0.LPCB.HEC.BIF9 due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.720482] ACPI Error: Aborting method \_SB.PCI0.BAT0._BIF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.720489] ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _BIF (20190816/battery-556)
[ 0.736208] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.745427] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 0.745430] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 0.749187] Freeing unused decrypted memory: 2040K
[ 0.749602] Freeing unused kernel image memory: 2756K
[ 0.749648] Write protecting the kernel read-only data: 26624k
[ 0.750059] Freeing unused kernel image memory: 2008K
[ 0.750230] Freeing unused kernel image memory: 744K
[ 0.756180] usb 3-5: new high-speed USB device number 2 using xhci_hcd
[ 0.756189] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.757470] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.757471] x86/mm: Checking user space page tables
[ 0.764562] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.764563] Run /init as init process
[ 0.825236] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 0.839522] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000184F (\GPIS) (20190816/utaddress-204)
[ 0.839528] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIX) (20190816/utaddress-204)
[ 0.839532] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-204)
[ 0.839536] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.839538] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPXX) (20190816/utaddress-204)
[ 0.839541] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 0.839544] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.839545] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPXX) (20190816/utaddress-204)
[ 0.839549] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204)
[ 0.839552] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 0.839555] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.839555] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPXX) (20190816/utaddress-204)
[ 0.839559] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204)
[ 0.839562] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 0.839565] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.839565] lpc_ich: Resource conflict(s) found affecting gpio_ich
jacky@jacky:~$ Hors ligne
#18 Le 14/07/2022, à 10:03
- nany
Re : démarrage xubuntu tres long [résolu]
centaure222 a écrit :
tu as de a lecture
Pas encore assez. ^^
Donne le retour de :
sudo dmesg | tail +1000 | head -1000Hors ligne
#19 Le 14/07/2022, à 10:05
- centaure222
Re : démarrage xubuntu tres long [résolu]
[ 26.906752] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 26.906752] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 26.906753] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
[ 26.906754] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 26.913431] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
[ 26.913489] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24
[ 27.362520] uvcvideo: Found UVC 1.00 device USB Camera (0bda:570c)
[ 27.374399] input: USB Camera: USB Camera as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input25
[ 27.374471] usbcore: registered new interface driver uvcvideo
[ 27.374472] USB Video Class driver (1.1.1)
[ 27.494147] intel_rapl_common: Found RAPL domain package
[ 27.494149] intel_rapl_common: Found RAPL domain core
[ 27.494150] intel_rapl_common: Found RAPL domain uncore
[ 27.494151] intel_rapl_common: Found RAPL domain dram
[ 27.494153] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 27.494158] intel_rapl_common: RAPL package-0 domain dram locked by BIOS
[ 34.246031] audit: type=1400 audit(1657732870.209:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=774 comm="apparmor_parser"
[ 34.246086] audit: type=1400 audit(1657732870.209:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=768 comm="apparmor_parser"
[ 34.263508] audit: type=1400 audit(1657732870.225:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=772 comm="apparmor_parser"
[ 34.263511] audit: type=1400 audit(1657732870.225:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=772 comm="apparmor_parser"
[ 34.263513] audit: type=1400 audit(1657732870.225:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=772 comm="apparmor_parser"
[ 34.278597] audit: type=1400 audit(1657732870.241:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=767 comm="apparmor_parser"
[ 34.323903] audit: type=1400 audit(1657732870.285:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=770 comm="apparmor_parser"
[ 34.339151] audit: type=1400 audit(1657732870.301:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=773 comm="apparmor_parser"
[ 34.343752] audit: type=1400 audit(1657732870.305:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=779 comm="apparmor_parser"
[ 34.343756] audit: type=1400 audit(1657732870.305:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=779 comm="apparmor_parser"
[ 41.524253] nouveau 0000:01:00.0: Enabling HDA controller
[ 51.888686] kauditd_printk_skb: 29 callbacks suppressed
[ 51.888691] audit: type=1400 audit(1657732887.853:41): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=953 comm="cups-browsed" capability=23 capname="sys_nice"
[ 54.058284] Generic FE-GE Realtek PHY r8169-0-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-0-400:00, irq=IGNORE)
[ 54.181008] r8169 0000:04:00.0 enp4s0: Link is Down
[ 57.171745] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control off
[ 57.171756] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 72.388319] nouveau 0000:01:00.0: Enabling HDA controller
[ 85.007973] rfkill: input handler disabled
[ 98.297574] systemd-journald[315]: File /var/log/journal/e10886ee0e6c40d4ad9e35543de85915/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 99.568319] nouveau 0000:01:00.0: Enabling HDA controller
[ 99.728728] rfkill: input handler enabled
[ 112.520300] nouveau 0000:01:00.0: Enabling HDA controller
[ 217.643095] audit: type=1400 audit(1657733053.605:42): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=2336 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[ 217.643099] audit: type=1400 audit(1657733053.605:43): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=2336 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 217.643102] audit: type=1400 audit(1657733053.605:44): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=2336 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 222.591508] audit: type=1400 audit(1657733058.553:45): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=2336 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[ 222.591512] audit: type=1400 audit(1657733058.553:46): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=2336 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[ 482.184299] nouveau 0000:01:00.0: Enabling HDA controller
[ 513.492322] nouveau 0000:01:00.0: Enabling HDA controller
[ 1246.432268] ata5.00: exception Emask 0x0 SAct 0x80e0101f SErr 0x40000 action 0x6 frozen
[ 1246.432281] ata5: SError: { CommWake }
[ 1246.432288] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432299] ata5.00: cmd 61/08:00:c8:4f:53/00:00:00:00:00/40 tag 0 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432303] ata5.00: status: { DRDY }
[ 1246.432307] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432316] ata5.00: cmd 61/08:08:18:51:53/00:00:00:00:00/40 tag 1 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432319] ata5.00: status: { DRDY }
[ 1246.432323] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432331] ata5.00: cmd 61/08:10:f0:54:53/00:00:00:00:00/40 tag 2 ncq dma 4096 out
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432334] ata5.00: status: { DRDY }
[ 1246.432338] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432346] ata5.00: cmd 61/08:18:08:55:53/00:00:00:00:00/40 tag 3 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432349] ata5.00: status: { DRDY }
[ 1246.432352] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432360] ata5.00: cmd 61/08:20:90:55:53/00:00:00:00:00/40 tag 4 ncq dma 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432364] ata5.00: status: { DRDY }
[ 1246.432368] ata5.00: failed command: READ FPDMA QUEUED
[ 1246.432376] ata5.00: cmd 60/00:60:28:56:22/01:00:57:00:00/40 tag 12 ncq dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432379] ata5.00: status: { DRDY }
[ 1246.432383] ata5.00: failed command: READ FPDMA QUEUED
[ 1246.432392] ata5.00: cmd 60/08:a8:70:17:d1/00:00:45:00:00/40 tag 21 ncq dma 4096 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432395] ata5.00: status: { DRDY }
[ 1246.432398] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432406] ata5.00: cmd 61/08:b0:a0:4c:53/00:00:00:00:00/40 tag 22 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432410] ata5.00: status: { DRDY }
[ 1246.432413] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432421] ata5.00: cmd 61/08:b8:a0:4e:53/00:00:00:00:00/40 tag 23 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432424] ata5.00: status: { DRDY }
[ 1246.432428] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432436] ata5.00: cmd 61/08:f8:90:4f:53/00:00:00:00:00/40 tag 31 ncq dma 4096 out
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432439] ata5.00: status: { DRDY }
[ 1246.432446] ata5: hard resetting link
[ 1246.748410] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1246.755906] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[ 1246.755931]
Initialized Local Variables for Method [GTFB]:
[ 1246.755933] Local0: 00000000fb1d22c7 <Obj> Integer 00000000000000A8
[ 1246.755947] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[ 1246.755948] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[ 1246.755963] Arg1: 00000000e8e50443 <Obj> Integer 0000000000000000
[ 1246.755974] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 1246.755990] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 1246.756009] ata5.00: _GTF evaluation failed (AE 0x300a)
[ 1246.763918] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[ 1246.763943]
Initialized Local Variables for Method [GTFB]:
[ 1246.763945] Local0: 00000000fcf0f2a2 <Obj> Integer 00000000000000A8
[ 1246.763959] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[ 1246.763961] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[ 1246.763975] Arg1: 00000000c94b0639 <Obj> Integer 0000000000000000
[ 1246.763986] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 1246.764002] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 1246.764020] ata5.00: _GTF evaluation failed (AE 0x300a)
[ 1246.764146] ata5.00: configured for UDMA/133
[ 1246.774393] ata5.00: device reported invalid CHS sector 0
[ 1246.774399] ata5.00: device reported invalid CHS sector 0
[ 1246.774403] ata5.00: device reported invalid CHS sector 0
[ 1246.774410] ata5.00: device reported invalid CHS sector 0
[ 1246.774413] ata5.00: device reported invalid CHS sector 0
[ 1246.774450] sd 4:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1246.774456] sd 4:0:0:0: [sda] tag#12 Sense Key : Illegal Request [current]
[ 1246.774463] sd 4:0:0:0: [sda] tag#12 Add. Sense: Unaligned write command
[ 1246.774468] sd 4:0:0:0: [sda] tag#12 CDB: Read(10) 28 00 57 22 56 28 00 01 00 00
[ 1246.774475] blk_update_request: I/O error, dev sda, sector 1461868072 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[ 1246.774525] ata5: EH complete
[ 9650.545477] perf: interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 9915.972324] r8169 0000:04:00.0 enp4s0: Link is Down
[ 9946.189501] PM: suspend entry (deep)
[ 9946.681853] Filesystems sync: 0.492 seconds
[ 9946.682289] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 9946.685066] OOM killer disabled.
[ 9946.685068] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 9946.686391] printk: Suspending console(s) (use no_console_suspend to debug)
[ 9946.795204] sd 4:0:0:0: [sda] Synchronizing SCSI cache
[ 9946.795293] sd 4:0:0:0: [sda] Stopping disk
[ 9947.223211] nouveau 0000:01:00.0: Enabling HDA controller
[ 9947.939807] ACPI: EC: interrupt blocked
[ 9947.959631] ACPI: Preparing to enter system sleep state S3
[ 9947.984994] ACPI: EC: event blocked
[ 9947.984995] ACPI: EC: EC stopped
[ 9947.984996] PM: Saving platform NVS memory
[ 9947.985074] Disabling non-boot CPUs ...
[ 9947.986522] smpboot: CPU 1 is now offline
[ 9947.990916] smpboot: CPU 2 is now offline
[ 9947.994176] IRQ 31: no longer affine to CPU3
[ 9947.995218] smpboot: CPU 3 is now offline
[ 9947.998541] IRQ 34: no longer affine to CPU4
[ 9947.999559] smpboot: CPU 4 is now offline
[ 9948.001666] IRQ 18: no longer affine to CPU5
[ 9948.001669] IRQ 23: no longer affine to CPU5
[ 9948.002677] smpboot: CPU 5 is now offline
[ 9948.004725] IRQ 16: no longer affine to CPU6
[ 9948.004732] IRQ 35: no longer affine to CPU6
[ 9948.005738] smpboot: CPU 6 is now offline
[ 9948.007888] IRQ 30: no longer affine to CPU7
[ 9948.008914] smpboot: CPU 7 is now offline
[ 9948.014655] ACPI: Low-level resume complete
[ 9948.014677] ACPI: EC: EC started
[ 9948.014677] PM: Restoring platform NVS memory
[ 9948.015189] Enabling non-boot CPUs ...
[ 9948.015236] x86: Booting SMP configuration:
[ 9948.015237] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 9948.017802] CPU1 is up
[ 9948.017838] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 9948.020393] CPU2 is up
[ 9948.020427] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 9948.023018] CPU3 is up
[ 9948.023051] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 9948.023918] CPU4 is up
[ 9948.023947] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 9948.024668] CPU5 is up
[ 9948.024694] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 9948.025423] CPU6 is up
[ 9948.025448] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 9948.026542] CPU7 is up
[ 9948.034414] ACPI: Waking up from system sleep state S3
[ 9948.051394] ACPI: EC: interrupt unblocked
[ 9948.051908] nouveau 0000:01:00.0: Enabling HDA controller
[ 9948.072035] ACPI: EC: event unblocked
[ 9948.072190] ath: phy0: ASPM enabled: 0x42
[ 9948.082848] sd 4:0:0:0: [sda] Starting disk
[ 9948.383323] usb 3-10: reset high-speed USB device number 3 using xhci_hcd
[ 9948.406631] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9948.410485] ata3.00: configured for UDMA/133
[ 9948.628079] OOM killer enabled.
[ 9948.628081] Restarting tasks ...
[ 9948.630838] pci_bus 0000:02: Allocating resources
[ 9948.630862] pci_bus 0000:03: Allocating resources
[ 9948.630887] pci_bus 0000:04: Allocating resources
[ 9948.635036] done.
[ 9948.637480] PM: suspend exit
[ 9948.638577] pci_bus 0000:02: Allocating resources
[ 9948.638586] pci_bus 0000:03: Allocating resources
[ 9948.638599] pci_bus 0000:04: Allocating resources
[ 9948.678849] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9948.678851] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9948.880298] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9948.880301] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9949.084324] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9949.084328] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9949.288335] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9949.288338] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9949.492296] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9949.492300] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9949.696346] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9949.696351] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9949.900358] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9949.900362] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9950.104312] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9950.104316] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9950.308355] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9950.308359] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9950.923090] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9950.930405] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[ 9950.930427]
Initialized Local Variables for Method [GTFB]:
[ 9950.930429] Local0: 00000000706c6c53 <Obj> Integer 00000000000000A8
[ 9950.930441] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[ 9950.930443] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[ 9950.930456] Arg1: 0000000038d44cee <Obj> Integer 0000000000000000
[ 9950.930465] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 9950.930480] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 9950.930496] ata5.00: _GTF evaluation failed (AE 0x300a)
[ 9950.937998] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[ 9950.938020]
Initialized Local Variables for Method [GTFB]:
[ 9950.938022] Local0: 00000000eab42189 <Obj> Integer 00000000000000A8
[ 9950.938035] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[ 9950.938036] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[ 9950.938049] Arg1: 0000000063f3c1a9 <Obj> Integer 0000000000000000
[ 9950.938059] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 9950.938073] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 9950.938090] ata5.00: _GTF evaluation failed (AE 0x300a)
[ 9950.938305] ata5.00: configured for UDMA/133
[ 9951.138272] Generic FE-GE Realtek PHY r8169-0-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-0-400:00, irq=IGNORE)
[ 9951.247830] r8169 0000:04:00.0 enp4s0: Link is Down
[ 9953.732304] audit: type=1400 audit(1657777010.712:47): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=12072 comm="cups-browsed" capability=23 capname="sys_nice"
[ 9954.169838] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control off
[ 9954.169857] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[10010.480351] r8169 0000:04:00.0 enp4s0: Link is Down
[10011.682887] ata5.00: exception Emask 0x0 SAct 0x7187fa SErr 0x0 action 0x6 frozen
[10011.682894] ata5.00: failed command: READ FPDMA QUEUED
[10011.682900] ata5.00: cmd 60/08:08:40:30:d4/00:00:54:00:00/40 tag 1 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.682903] ata5.00: status: { DRDY }
[10011.682905] ata5.00: failed command: READ FPDMA QUEUED
[10011.682910] ata5.00: cmd 60/08:18:98:06:db/00:00:52:00:00/40 tag 3 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.682912] ata5.00: status: { DRDY }
[10011.682914] ata5.00: failed command: READ FPDMA QUEUED
[10011.682918] ata5.00: cmd 60/28:20:f0:92:dd/00:00:53:00:00/40 tag 4 ncq dma 20480 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.682920] ata5.00: status: { DRDY }
[10011.682922] ata5.00: failed command: READ FPDMA QUEUED
[10011.682926] ata5.00: cmd 60/08:28:98:95:dd/00:00:53:00:00/40 tag 5 ncq dma 4096 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.682928] ata5.00: status: { DRDY }
[10011.682930] ata5.00: failed command: READ FPDMA QUEUED
[10011.682934] ata5.00: cmd 60/18:30:e0:a2:dd/00:00:53:00:00/40 tag 6 ncq dma 12288 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.682936] ata5.00: status: { DRDY }
[10011.682938] ata5.00: failed command: READ FPDMA QUEUED
[10011.682942] ata5.00: cmd 60/08:38:60:59:15/00:00:54:00:00/40 tag 7 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.682944] ata5.00: status: { DRDY }
[10011.682946] ata5.00: failed command: READ FPDMA QUEUED
[10011.682950] ata5.00: cmd 60/08:40:78:64:15/00:00:54:00:00/40 tag 8 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.682952] ata5.00: status: { DRDY }
[10011.682954] ata5.00: failed command: READ FPDMA QUEUED
[10011.682958] ata5.00: cmd 60/80:48:80:34:89/00:00:54:00:00/40 tag 9 ncq dma 65536 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.682960] ata5.00: status: { DRDY }
[10011.682962] ata5.00: failed command: WRITE FPDMA QUEUED
[10011.682966] ata5.00: cmd 61/08:50:50:04:d8/00:00:52:00:00/40 tag 10 ncq dma 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.682968] ata5.00: status: { DRDY }
[10011.682970] ata5.00: failed command: READ FPDMA QUEUED
[10011.682974] ata5.00: cmd 60/20:78:e0:f0:0b/00:00:54:00:00/40 tag 15 ncq dma 16384 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.682976] ata5.00: status: { DRDY }
[10011.682978] ata5.00: failed command: READ FPDMA QUEUED
[10011.682982] ata5.00: cmd 60/08:80:28:12:11/00:00:49:00:00/40 tag 16 ncq dma 4096 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.682984] ata5.00: status: { DRDY }
[10011.682986] ata5.00: failed command: READ FPDMA QUEUED
[10011.682990] ata5.00: cmd 60/10:a0:08:25:50/00:00:4a:00:00/40 tag 20 ncq dma 8192 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.682992] ata5.00: status: { DRDY }
[10011.682994] ata5.00: failed command: READ FPDMA QUEUED
[10011.682998] ata5.00: cmd 60/08:a8:18:25:50/00:00:4a:00:00/40 tag 21 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.683000] ata5.00: status: { DRDY }
[10011.683002] ata5.00: failed command: READ FPDMA QUEUED
[10011.683006] ata5.00: cmd 60/e8:b0:20:25:50/00:00:4a:00:00/40 tag 22 ncq dma 118784 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[10011.683008] ata5.00: status: { DRDY }
[10011.683012] ata5: hard resetting link
[10011.998818] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10012.006002] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[10012.006021]
Initialized Local Variables for Method [GTFB]:
[10012.006023] Local0: 00000000cc0b544f <Obj> Integer 00000000000000A8
[10012.006033] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[10012.006034] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[10012.006045] Arg1: 000000009def6edb <Obj> Integer 0000000000000000
[10012.006053] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[10012.006065] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[10012.006079] ata5.00: _GTF evaluation failed (AE 0x300a)
[10012.013490] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[10012.013509]
Initialized Local Variables for Method [GTFB]:
[10012.013510] Local0: 000000009def6edb <Obj> Integer 00000000000000A8
[10012.013520] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[10012.013522] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[10012.013532] Arg1: 000000003655ae49 <Obj> Integer 0000000000000000
[10012.013540] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[10012.013552] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[10012.013566] ata5.00: _GTF evaluation failed (AE 0x300a)
[10012.013784] ata5.00: configured for UDMA/133
[10012.024126] sd 4:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10012.024132] sd 4:0:0:0: [sda] tag#1 Sense Key : Illegal Request [current]
[10012.024137] sd 4:0:0:0: [sda] tag#1 Add. Sense: Unaligned write command
[10012.024141] sd 4:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 54 d4 30 40 00 00 08 00
[10012.024146] blk_update_request: I/O error, dev sda, sector 1423192128 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[10012.024174] sd 4:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10012.024177] sd 4:0:0:0: [sda] tag#3 Sense Key : Illegal Request [current]
[10012.024179] sd 4:0:0:0: [sda] tag#3 Add. Sense: Unaligned write command
[10012.024182] sd 4:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 52 db 06 98 00 00 08 00
[10012.024185] blk_update_request: I/O error, dev sda, sector 1390085784 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[10012.024207] sd 4:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10012.024210] sd 4:0:0:0: [sda] tag#4 Sense Key : Illegal Request [current]
[10012.024212] sd 4:0:0:0: [sda] tag#4 Add. Sense: Unaligned write command
[10012.024215] sd 4:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 53 dd 92 f0 00 00 28 00
[10012.024217] blk_update_request: I/O error, dev sda, sector 1407030000 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
[10012.024229] sd 4:0:0:0: [sda] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10012.024231] sd 4:0:0:0: [sda] tag#5 Sense Key : Illegal Request [current]
[10012.024234] sd 4:0:0:0: [sda] tag#5 Add. Sense: Unaligned write command
[10012.024237] sd 4:0:0:0: [sda] tag#5 CDB: Read(10) 28 00 53 dd 95 98 00 00 08 00
[10012.024240] blk_update_request: I/O error, dev sda, sector 1407030680 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[10012.024250] sd 4:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10012.024253] sd 4:0:0:0: [sda] tag#6 Sense Key : Illegal Request [current]
[10012.024257] sd 4:0:0:0: [sda] tag#6 Add. Sense: Unaligned write command
[10012.024260] sd 4:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 53 dd a2 e0 00 00 18 00
[10012.024262] blk_update_request: I/O error, dev sda, sector 1407034080 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[10012.024272] sd 4:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10012.024274] sd 4:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current]
[10012.024277] sd 4:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command
[10012.024280] sd 4:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 54 15 59 60 00 00 08 00
[10012.024282] blk_update_request: I/O error, dev sda, sector 1410685280 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[10012.024292] sd 4:0:0:0: [sda] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10012.024294] sd 4:0:0:0: [sda] tag#8 Sense Key : Illegal Request [current]
[10012.024297] sd 4:0:0:0: [sda] tag#8 Add. Sense: Unaligned write command
[10012.024300] sd 4:0:0:0: [sda] tag#8 CDB: Read(10) 28 00 54 15 64 78 00 00 08 00
[10012.024302] blk_update_request: I/O error, dev sda, sector 1410688120 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[10012.024310] sd 4:0:0:0: [sda] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10012.024313] sd 4:0:0:0: [sda] tag#9 Sense Key : Illegal Request [current]
[10012.024315] sd 4:0:0:0: [sda] tag#9 Add. Sense: Unaligned write command
[10012.024318] sd 4:0:0:0: [sda] tag#9 CDB: Read(10) 28 00 54 89 34 80 00 00 80 00
[10012.024320] blk_update_request: I/O error, dev sda, sector 1418278016 op 0x0:(READ) flags 0x80700 phys_seg 15 prio class 0
[10012.024332] sd 4:0:0:0: [sda] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10012.024335] sd 4:0:0:0: [sda] tag#15 Sense Key : Illegal Request [current]
[10012.024338] sd 4:0:0:0: [sda] tag#15 Add. Sense: Unaligned write command
[10012.024340] sd 4:0:0:0: [sda] tag#15 CDB: Read(10) 28 00 54 0b f0 e0 00 00 20 00
[10012.024342] blk_update_request: I/O error, dev sda, sector 1410068704 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[10012.024360] sd 4:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10012.024363] sd 4:0:0:0: [sda] tag#20 Sense Key : Illegal Request [current]
[10012.024365] sd 4:0:0:0: [sda] tag#20 Add. Sense: Unaligned write command
[10012.024368] sd 4:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 4a 50 25 08 00 00 10 00
[10012.024370] blk_update_request: I/O error, dev sda, sector 1246766344 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[10012.024389] ata5: EH complete
[10024.477694] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control off
[10044.962852] ata5.00: exception Emask 0x0 SAct 0x8ee840 SErr 0x0 action 0x6 frozen
[10044.962863] ata5.00: failed command: WRITE FPDMA QUEUED
[10044.962874] ata5.00: cmd 61/c8:30:d8:2b:a1/04:00:2b:00:00/40 tag 6 ncq dma 626688 out
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[10044.962878] ata5.00: status: { DRDY }
[10044.962883] ata5.00: failed command: READ FPDMA QUEUED
[10044.962892] ata5.00: cmd 60/08:58:f0:9c:15/00:00:49:00:00/40 tag 11 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[10044.962896] ata5.00: status: { DRDY }
[10044.962900] ata5.00: failed command: READ FPDMA QUEUED
[10044.962908] ata5.00: cmd 60/08:68:98:06:db/00:00:52:00:00/40 tag 13 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[10044.962911] ata5.00: status: { DRDY }
[10044.962915] ata5.00: failed command: READ FPDMA QUEUED
[10044.962923] ata5.00: cmd 60/08:70:18:25:50/00:00:4a:00:00/40 tag 14 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[10044.962926] ata5.00: status: { DRDY }
[10044.962930] ata5.00: failed command: READ FPDMA QUEUED
[10044.962938] ata5.00: cmd 60/08:78:28:12:11/00:00:49:00:00/40 tag 15 ncq dma 4096 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[10044.962941] ata5.00: status: { DRDY }
[10044.962944] ata5.00: failed command: READ FPDMA QUEUED
[10044.962953] ata5.00: cmd 60/08:88:e0:f0:0b/00:00:54:00:00/40 tag 17 ncq dma 4096 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[10044.962956] ata5.00: status: { DRDY }
[10044.962959] ata5.00: failed command: READ FPDMA QUEUED
[10044.962967] ata5.00: cmd 60/08:90:10:25:50/00:00:4a:00:00/40 tag 18 ncq dma 4096 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[10044.962971] ata5.00: status: { DRDY }
[10044.962974] ata5.00: failed command: WRITE FPDMA QUEUED
[10044.962982] ata5.00: cmd 61/08:98:50:04:d8/00:00:52:00:00/40 tag 19 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[10044.962986] ata5.00: status: { DRDY }
[10044.962990] ata5.00: failed command: READ FPDMA QUEUED
[10044.962998] ata5.00: cmd 60/e0:b8:28:25:50/00:00:4a:00:00/40 tag 23 ncq dma 114688 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[10044.963001] ata5.00: status: { DRDY }
[10044.963008] ata5: hard resetting link
[10045.278929] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10045.286455] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[10045.286481]
Initialized Local Variables for Method [GTFB]:
[10045.286483] Local0: 000000003655ae49 <Obj> Integer 00000000000000A8
[10045.286496] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[10045.286498] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[10045.286513] Arg1: 00000000eab42189 <Obj> Integer 0000000000000000
[10045.286524] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[10045.286540] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[10045.286558] ata5.00: _GTF evaluation failed (AE 0x300a)
[10045.294367] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[10045.294392]
Initialized Local Variables for Method [GTFB]:
[10045.294394] Local0: 00000000eab42189 <Obj> Integer 00000000000000A8
[10045.294407] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[10045.294409] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[10045.294424] Arg1: 00000000ba75e60f <Obj> Integer 0000000000000000
[10045.294435] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[10045.294451] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[10045.294470] ata5.00: _GTF evaluation failed (AE 0x300a)
[10045.294671] ata5.00: configured for UDMA/133
[10045.304981] ata5.00: device reported invalid CHS sector 0
[10045.305007] scsi_io_completion_action: 1 callbacks suppressed
[10045.305017] sd 4:0:0:0: [sda] tag#11 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10045.305024] sd 4:0:0:0: [sda] tag#11 Sense Key : Illegal Request [current]
[10045.305030] sd 4:0:0:0: [sda] tag#11 Add. Sense: Unaligned write command
[10045.305035] sd 4:0:0:0: [sda] tag#11 CDB: Read(10) 28 00 49 15 9c f0 00 00 08 00
[10045.305037] print_req_error: 1 callbacks suppressed
[10045.305043] blk_update_request: I/O error, dev sda, sector 1226153200 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[10045.305088] ata5: EH complete
[10047.581092] ata5.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x0
[10047.581099] ata5.00: irq_stat 0x40000008
[10047.581105] ata5.00: failed command: READ FPDMA QUEUED
[10047.581115] ata5.00: cmd 60/08:78:98:06:db/00:00:52:00:00/40 tag 15 ncq dma 4096 in
res 41/40:00:98:06:db/00:00:52:00:00/40 Emask 0x409 (media error) <F>
[10047.581120] ata5.00: status: { DRDY ERR }
[10047.581123] ata5.00: error: { UNC }
[10047.594332] ata5.00: configured for UDMA/133
[10047.594356] sd 4:0:0:0: [sda] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10047.594361] sd 4:0:0:0: [sda] tag#15 Sense Key : Medium Error [current]
[10047.594366] sd 4:0:0:0: [sda] tag#15 Add. Sense: Unrecovered read error - auto reallocate failed
[10047.594371] sd 4:0:0:0: [sda] tag#15 CDB: Read(10) 28 00 52 db 06 98 00 00 08 00
[10047.594376] blk_update_request: I/O error, dev sda, sector 1390085784 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[10047.594417] ata5: EH complete
[10049.921918] ata5.00: exception Emask 0x0 SAct 0x400000 SErr 0x0 action 0x0
[10049.921927] ata5.00: irq_stat 0x40000008
[10049.921933] ata5.00: failed command: READ FPDMA QUEUED
[10049.921945] ata5.00: cmd 60/08:b0:98:06:db/00:00:52:00:00/40 tag 22 ncq dma 4096 in
res 41/40:00:98:06:db/00:00:52:00:00/40 Emask 0x409 (media error) <F>
[10049.921949] ata5.00: status: { DRDY ERR }
[10049.921953] ata5.00: error: { UNC }
[10049.935030] ata5.00: configured for UDMA/133
[10049.935057] sd 4:0:0:0: [sda] tag#22 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10049.935063] sd 4:0:0:0: [sda] tag#22 Sense Key : Medium Error [current]
[10049.935069] sd 4:0:0:0: [sda] tag#22 Add. Sense: Unrecovered read error - auto reallocate failed
[10049.935075] sd 4:0:0:0: [sda] tag#22 CDB: Read(10) 28 00 52 db 06 98 00 00 08 00
[10049.935081] blk_update_request: I/O error, dev sda, sector 1390085784 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[10049.935127] ata5: EH complete
[10057.026060] PM: suspend entry (deep)
[10059.809545] Filesystems sync: 2.783 seconds
[10059.810136] Freezing user space processes ... (elapsed 0.003 seconds) done.
[10059.813397] OOM killer disabled.
[10059.813399] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10059.814854] printk: Suspending console(s) (use no_console_suspend to debug)
[10059.815918] r8169 0000:04:00.0 enp4s0: Link is Down
[10059.922765] sd 4:0:0:0: [sda] Synchronizing SCSI cache
[10059.932057] sd 4:0:0:0: [sda] Stopping disk
[10060.354802] nouveau 0000:01:00.0: Enabling HDA controller
[10061.031336] ACPI: EC: interrupt blocked
[10061.051440] ACPI: Preparing to enter system sleep state S3
[10061.077224] ACPI: EC: event blocked
[10061.077226] ACPI: EC: EC stopped
[10061.077227] PM: Saving platform NVS memory
[10061.077323] Disabling non-boot CPUs ...
[10061.078903] smpboot: CPU 1 is now offline
[10061.082214] smpboot: CPU 2 is now offline
[10061.084500] IRQ 31: no longer affine to CPU3
[10061.085522] smpboot: CPU 3 is now offline
[10061.088020] IRQ 35: no longer affine to CPU4
[10061.089370] smpboot: CPU 4 is now offline
[10061.090905] IRQ 18: no longer affine to CPU5
[10061.091915] smpboot: CPU 5 is now offline
[10061.093414] IRQ 30: no longer affine to CPU6
[10061.093420] IRQ 34: no longer affine to CPU6
[10061.094431] smpboot: CPU 6 is now offline
[10061.095916] IRQ 16: no longer affine to CPU7
[10061.095926] IRQ 32: no longer affine to CPU7
[10061.096941] smpboot: CPU 7 is now offline
[10061.101610] ACPI: Low-level resume complete
[10061.101633] ACPI: EC: EC started
[10061.101634] PM: Restoring platform NVS memory
[10061.102034] Enabling non-boot CPUs ...
[10061.102083] x86: Booting SMP configuration:
[10061.102084] smpboot: Booting Node 0 Processor 1 APIC 0x2
[10061.104673] CPU1 is up
[10061.104710] smpboot: Booting Node 0 Processor 2 APIC 0x4
[10061.107292] CPU2 is up
[10061.107325] smpboot: Booting Node 0 Processor 3 APIC 0x6
[10061.109937] CPU3 is up
[10061.109970] smpboot: Booting Node 0 Processor 4 APIC 0x1
[10061.110870] CPU4 is up
[10061.110899] smpboot: Booting Node 0 Processor 5 APIC 0x3
[10061.111636] CPU5 is up
[10061.111661] smpboot: Booting Node 0 Processor 6 APIC 0x5
[10061.112411] CPU6 is up
[10061.112435] smpboot: Booting Node 0 Processor 7 APIC 0x7
[10061.113201] CPU7 is up
[10061.116527] ACPI: Waking up from system sleep state S3
[10061.127005] ACPI: EC: interrupt unblocked
[10061.127590] nouveau 0000:01:00.0: Enabling HDA controller
[10061.147813] ACPI: EC: event unblocked
[10061.147936] ath: phy0: ASPM enabled: 0x42
[10061.148823] sd 4:0:0:0: [sda] Starting disk
[10061.250802] r8169 0000:04:00.0 enp4s0: Link is Down
[10061.458915] usb 3-10: reset high-speed USB device number 3 using xhci_hcd
[10061.474099] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[10061.477924] ata3.00: configured for UDMA/133
[10061.703573] OOM killer enabled.
[10061.703575] Restarting tasks ...
[10061.707936] pci_bus 0000:02: Allocating resources
[10061.707955] pci_bus 0000:03: Allocating resources
[10061.707981] pci_bus 0000:04: Allocating resources
[10061.707997] done.
[10061.716608] PM: suspend exit
[10061.718305] pci_bus 0000:02: Allocating resources
[10061.718313] pci_bus 0000:03: Allocating resources
[10061.718323] pci_bus 0000:04: Allocating resources
[10061.740926] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[10061.740928] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[10061.943892] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[10061.943896] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[10062.147983] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[10062.147989] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[10062.351968] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[10062.351973] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[10062.555915] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[10062.555922] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[10062.760854] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[10062.760862] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[10062.964623] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[10062.964630] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[10063.167915] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[10063.167920] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[10063.371959] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[10063.371964] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[10063.990662] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10063.997783] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[10063.997802]
Initialized Local Variables for Method [GTFB]:
[10063.997803] Local0: 00000000374be9ba <Obj> Integer 00000000000000A8
[10063.997814] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[10063.997815] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[10063.997825] Arg1: 00000000d236627e <Obj> Integer 0000000000000000
[10063.997833] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[10063.997846] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[10063.997859] ata5.00: _GTF evaluation failed (AE 0x300a)
[10064.005213] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[10064.005232]
Initialized Local Variables for Method [GTFB]:
[10064.005234] Local0: 00000000ba75e60f <Obj> Integer 00000000000000A8
[10064.005244] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[10064.005246] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[10064.005256] Arg1: 000000003655ae49 <Obj> Integer 0000000000000000
[10064.005265] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[10064.005277] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[10064.005291] ata5.00: _GTF evaluation failed (AE 0x300a)
[10064.005450] ata5.00: configured for UDMA/133
[10074.907823] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control off
[11085.291051] audit: type=1400 audit(1657778144.187:48): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=14641 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[11085.291053] audit: type=1400 audit(1657778144.187:49): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=14641 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[11085.291055] audit: type=1400 audit(1657778144.187:50): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=14641 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[11085.291113] audit: type=1400 audit(1657778144.187:51): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=14641 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[11085.291115] audit: type=1400 audit(1657778144.187:52): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=14641 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[11709.189605] nouveau 0000:01:00.0: Enabling HDA controller
[12371.125651] r8169 0000:04:00.0 enp4s0: Link is Down
[12401.275836] PM: suspend entry (deep)
[12401.883904] Filesystems sync: 0.608 seconds
[12401.884352] Freezing user space processes ... (elapsed 0.081 seconds) done.
[12401.965754] OOM killer disabled.
[12401.965756] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[12401.967214] printk: Suspending console(s) (use no_console_suspend to debug)
[12402.084695] sd 4:0:0:0: [sda] Synchronizing SCSI cache
[12402.085122] sd 4:0:0:0: [sda] Stopping disk
[12402.504731] nouveau 0000:01:00.0: Enabling HDA controller
[12403.157641] ACPI: EC: interrupt blocked
[12403.177371] ACPI: Preparing to enter system sleep state S3
[12403.203335] ACPI: EC: event blocked
[12403.203336] ACPI: EC: EC stopped
[12403.203337] PM: Saving platform NVS memory
[12403.203439] Disabling non-boot CPUs ...
[12403.205093] smpboot: CPU 1 is now offline
[12403.209552] smpboot: CPU 2 is now offline
[12403.213718] smpboot: CPU 3 is now offline
[12403.216652] smpboot: CPU 4 is now offline
[12403.219030] smpboot: CPU 5 is now offline
[12403.221379] smpboot: CPU 6 is now offline
[12403.222730] IRQ 23: no longer affine to CPU7
[12403.223740] smpboot: CPU 7 is now offline
[12403.228532] ACPI: Low-level resume complete
[12403.228554] ACPI: EC: EC started
[12403.228555] PM: Restoring platform NVS memory
[12403.228953] Enabling non-boot CPUs ...
[12403.229002] x86: Booting SMP configuration:
[12403.229003] smpboot: Booting Node 0 Processor 1 APIC 0x2
[12403.231570] CPU1 is up
[12403.231606] smpboot: Booting Node 0 Processor 2 APIC 0x4
[12403.234164] CPU2 is up
[12403.234197] smpboot: Booting Node 0 Processor 3 APIC 0x6
[12403.236794] CPU3 is up
[12403.236829] smpboot: Booting Node 0 Processor 4 APIC 0x1
[12403.237694] CPU4 is up
[12403.237725] smpboot: Booting Node 0 Processor 5 APIC 0x3
[12403.238449] CPU5 is up
[12403.238474] smpboot: Booting Node 0 Processor 6 APIC 0x5
[12403.239202] CPU6 is up
[12403.239226] smpboot: Booting Node 0 Processor 7 APIC 0x7
[12403.240329] CPU7 is up
[12403.248094] ACPI: Waking up from system sleep state S3
[12403.260796] ACPI: EC: interrupt unblocked
[12403.261360] nouveau 0000:01:00.0: Enabling HDA controller
[12403.281479] ACPI: EC: event unblocked
[12403.281527] ath: phy0: ASPM enabled: 0x42
[12403.292656] sd 4:0:0:0: [sda] Starting disk
[12403.592836] usb 3-10: reset high-speed USB device number 3 using xhci_hcd
[12403.608495] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[12403.612230] ata3.00: configured for UDMA/133
[12403.836713] OOM killer enabled.
[12403.836715] Restarting tasks ...
[12403.839335] pci_bus 0000:02: Allocating resources
[12403.839355] pci_bus 0000:03: Allocating resources
[12403.839376] pci_bus 0000:04: Allocating resources
[12403.840576] done.
[12403.849451] PM: suspend exit
[12403.850608] pci_bus 0000:02: Allocating resources
[12403.850620] pci_bus 0000:03: Allocating resources
[12403.850629] pci_bus 0000:04: Allocating resources
[12403.876667] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[12403.876669] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[12404.078527] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[12404.078533] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[12404.282633] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[12404.282639] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[12404.485851] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[12404.485858] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[12404.689816] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[12404.689822] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[12404.893673] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[12404.893676] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[12405.102612] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[12405.102616] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[12405.305698] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[12405.305704] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[12405.509709] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[12405.509714] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[12406.144466] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[12406.151320] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[12406.151334]
Initialized Local Variables for Method [GTFB]:
[12406.151335] Local0: 00000000fa1d1c23 <Obj> Integer 00000000000000A8
[12406.151343] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[12406.151344] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[12406.151352] Arg1: 0000000033f97622 <Obj> Integer 0000000000000000
[12406.151357] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[12406.151366] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[12406.151376] ata5.00: _GTF evaluation failed (AE 0x300a)
[12406.158461] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[12406.158475]
Initialized Local Variables for Method [GTFB]:
[12406.158476] Local0: 0000000033f97622 <Obj> Integer 00000000000000A8
[12406.158483] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[12406.158484] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[12406.158492] Arg1: 0000000050e7bd51 <Obj> Integer 0000000000000000
[12406.158498] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[12406.158507] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[12406.158517] ata5.00: _GTF evaluation failed (AE 0x300a)
[12406.158661] ata5.00: configured for UDMA/133
[12406.275678] Generic FE-GE Realtek PHY r8169-0-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-0-400:00, irq=IGNORE)
[12406.385284] r8169 0000:04:00.0 enp4s0: Link is Down
[12420.152649] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control off
[12420.152672] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
jacky@jacky:~$ Hors ligne
#20 Le 14/07/2022, à 10:13
- geole
Re : démarrage xubuntu tres long [résolu]
Bonjour.
Le logrotate peut être très long à cause de la taille des journaux consécutif à un dysfonctionnement.
Donne ces retours.
ls -Sls /var/logjournalctl -b -p err | head -200journalctl -b | tail -200Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#21 Le 14/07/2022, à 10:15
- nany
Re : démarrage xubuntu tres long [résolu]
Je ne vois rien de flagrant dans le processus de démarrage.
À part peut-être ce trou de vingt-six secondes entre les deux retours.
Pour avoir une vue d’ensemble, donne le retour de :
sudo dmesg | head -1500Hors ligne
#22 Le 14/07/2022, à 10:18
- centaure222
Re : démarrage xubuntu tres long [résolu]
jacky@jacky:~$ ls -Sls /var/log
total 60996
57916 -rw-r----- 1 syslog adm 59301506 juil. 14 09:54 syslog
636 -rw-r----- 1 syslog adm 644196 juil. 14 08:58 kern.log
624 -rw-r----- 1 syslog adm 632221 juil. 10 08:06 kern.log.1
44 -rw-rw-r-- 1 root utmp 292292 oct. 27 2021 lastlog
176 -rw-r----- 1 syslog adm 174779 juil. 27 2021 syslog.1
144 -rw-rw-r-- 1 root utmp 139392 juil. 14 10:16 wtmp
108 -rw-r--r-- 1 root adm 107484 juil. 13 19:21 dmesg
108 -rw-r--r-- 1 root adm 107076 juil. 11 22:39 dmesg.0
104 -rw-r--r-- 1 root root 104003 juil. 31 2020 bootstrap.log
104 -rw-r--r-- 1 root root 101073 oct. 27 2021 Xorg.0.log
84 -rw-r--r-- 1 root root 79272 oct. 11 2021 Xorg.0.log.old
72 -rw-r--r-- 1 root root 67247 juin 28 08:53 dpkg.log.1
52 -rw-r----- 1 syslog adm 50694 juil. 3 07:52 kern.log.2.gz
52 -rw-r--r-- 1 root root 48586 juil. 14 08:01 dpkg.log
48 -rw-r----- 1 syslog adm 43079 juil. 10 08:06 auth.log.1
44 -rw-r----- 1 syslog adm 38338 juil. 14 10:05 auth.log
8 -rw-r--r-- 1 root root 32032 oct. 27 2021 faillog
32 -rw-r----- 1 syslog adm 30237 juin 26 06:59 kern.log.3.gz
32 -rw-r----- 1 syslog adm 29578 juin 19 07:53 kern.log.4.gz
28 -rw-r--r-- 1 root root 28070 juil. 13 19:21 gpu-manager.log
24 -rw-r--r-- 1 root adm 24151 juin 28 08:56 dmesg.4.gz
24 -rw-r--r-- 1 root adm 23429 juil. 7 15:49 dmesg.3.gz
24 -rw-r--r-- 1 root adm 23164 juil. 11 19:43 dmesg.1.gz
24 -rw-r--r-- 1 root adm 23088 juil. 7 16:01 dmesg.2.gz
20 -rw-r----- 1 root adm 16448 juin 17 06:35 apport.log.1
16 -rw------- 1 root root 15818 juil. 12 07:20 boot.log.2
16 -rw-r----- 1 syslog adm 15512 juil. 23 2021 syslog.5.gz
16 -rw------- 1 root root 15175 juil. 8 07:42 boot.log.3
16 -rw-r--r-- 1 root root 14761 oct. 27 2021 dpkg.log.10.gz
16 -rw-r----- 1 syslog adm 13947 juil. 21 2021 syslog.7.gz
16 -rw-r----- 1 syslog adm 13403 juil. 25 2021 syslog.3.gz
16 -rw-r----- 1 syslog adm 13122 juil. 26 2021 syslog.2.gz
16 -rw-r--r-- 1 root root 12852 janv. 17 15:37 dpkg.log.6.gz
12 -rw-r----- 1 syslog adm 12110 juil. 22 2021 syslog.6.gz
12 -rw-r----- 1 syslog adm 12082 juil. 24 2021 syslog.4.gz
12 -rw-r--r-- 1 root root 11151 mars 19 21:14 fontconfig.log
12 -rw-r--r-- 1 root root 9210 juil. 31 2021 dpkg.log.12.gz
12 -rw-r--r-- 1 root root 9187 déc. 15 2021 dpkg.log.7.gz
12 -rw------- 1 root root 9047 juin 11 07:05 boot.log.5
12 -rw-r--r-- 1 root root 8377 mars 15 06:59 dpkg.log.5.gz
12 -rw-r--r-- 1 root root 8353 mai 28 08:05 dpkg.log.2.gz
8 -rw------- 1 root root 8168 mai 28 00:00 boot.log.6
8 -rw------- 1 root root 8093 juin 29 06:33 boot.log.4
8 -rw------- 1 root root 7596 juil. 14 07:36 boot.log.1
8 -rw------- 1 root root 7520 mai 16 08:19 boot.log.7
8 -rw------- 1 root root 7304 nov. 6 2021 ubuntu-advantage.log.1
8 -rw-r--r-- 1 root root 6455 juin 30 11:19 ubuntu-advantage-timer.log.1
8 -rw-r--r-- 1 root root 6397 août 25 2021 dpkg.log.11.gz
4 drwxr-xr-x 2 root root 4096 juil. 11 22:37 apt
4 drwxr-xr-x 2 root root 4096 juil. 14 07:36 cups
4 drwxr-xr-x 2 root root 4096 juil. 21 2020 dist-upgrade
4 drwx--x--x 2 root gdm 4096 juil. 12 2021 gdm3
4 drwxr-xr-x 3 root root 4096 juil. 31 2020 hp
4 drwxr-xr-x 2 root root 4096 mai 19 2021 installer
4 drwxr-sr-x+ 3 root systemd-journal 4096 mai 19 2021 journal
4 drwxr-xr-x 2 root root 4096 oct. 28 2021 lightdm
4 drwxr-xr-x 2 root root 4096 juil. 19 2021 openvpn
4 drwx------ 2 root root 4096 juil. 31 2020 private
4 drwx------ 2 speech-dispatcher root 4096 janv. 19 2020 speech-dispatcher
4 drwxr-x--- 2 root adm 4096 juil. 1 06:47 unattended-upgrades
4 -rw-r--r-- 1 root root 3657 avril 16 22:15 dpkg.log.3.gz
4 -rw-r--r-- 1 root root 3401 mars 19 21:14 dpkg.log.4.gz
4 -rw-r----- 1 syslog adm 3359 juil. 3 07:52 auth.log.2.gz
4 -rw-r----- 1 syslog adm 3161 juin 19 07:52 auth.log.4.gz
4 -rw-r--r-- 1 root root 2835 juil. 13 17:18 ubuntu-advantage-timer.log
4 -rw-r----- 1 syslog adm 2582 juin 26 06:59 auth.log.3.gz
4 -rw------- 1 root root 2493 sept. 1 2021 ubuntu-advantage.log.4.gz
4 -rw------- 1 root root 2371 nov. 1 2021 ubuntu-advantage.log.2.gz
4 -rw------- 1 root root 2297 août 1 2021 ubuntu-advantage.log.5.gz
4 -rw------- 1 root root 2205 oct. 1 2021 ubuntu-advantage.log.3.gz
4 -rw-r--r-- 1 root root 1703 oct. 29 2021 dpkg.log.9.gz
4 -rw-r--r-- 1 root root 1427 juin 18 13:54 alternatives.log.1
4 -rw-r--r-- 1 root root 1316 nov. 6 2021 dpkg.log.8.gz
4 -rw------- 1 root root 856 mars 31 19:32 ubuntu-advantage-timer.log.4.gz
4 -rw-r--r-- 1 root root 838 mai 31 20:31 ubuntu-advantage-timer.log.2.gz
4 -rw------- 1 root root 833 janv. 31 22:36 ubuntu-advantage-timer.log.6.gz
4 -rw------- 1 root root 806 avril 30 21:19 ubuntu-advantage-timer.log.3.gz
4 -rw------- 1 root root 737 févr. 28 11:47 ubuntu-advantage-timer.log.5.gz
4 -rw-r--r-- 1 root root 650 oct. 27 2021 alternatives.log.10.gz
4 -rw-r--r-- 1 root root 637 juil. 7 15:57 alternatives.log
4 -rw-r----- 1 root adm 522 juil. 15 2021 apport.log.4.gz
4 -rw-r--r-- 1 root root 514 mars 15 06:58 alternatives.log.5.gz
4 -rw-r--r-- 1 root root 492 déc. 10 2021 alternatives.log.7.gz
4 -rw-r----- 1 root adm 440 mai 23 21:16 apport.log.3.gz
4 -rw------- 1 root root 425 juil. 1 2021 ubuntu-advantage.log.6.gz
4 -rw-r--r-- 1 root root 424 avril 16 22:15 alternatives.log.3.gz
4 -rw-r--r-- 1 root root 380 août 25 2021 alternatives.log.11.gz
4 -rw-r----- 1 root adm 351 mai 25 21:00 apport.log.2.gz
4 -rw-r--r-- 1 root root 313 mai 27 07:52 alternatives.log.2.gz
4 -rw-r--r-- 1 root root 245 janv. 17 15:36 alternatives.log.6.gz
4 -rw-r--r-- 1 root root 209 mars 19 21:12 alternatives.log.4.gz
4 -rw-r--r-- 1 root root 198 juil. 28 2021 alternatives.log.12.gz
4 -rw-r--r-- 1 root root 155 nov. 6 2021 alternatives.log.8.gz
4 -rw-r--r-- 1 root root 137 oct. 29 2021 alternatives.log.9.gz
0 -rw-r----- 1 root adm 0 juin 18 07:50 apport.log
0 -rw------- 1 root root 0 juil. 14 07:36 boot.log
0 -rw-rw---- 1 root utmp 0 juil. 1 06:47 btmp
0 -rw-rw---- 1 root utmp 0 juin 1 06:52 btmp.1
0 -rw-r----- 1 syslog adm 0 août 3 2021 syslog.1.gz-2021080407.backup
0 -rw-r----- 1 syslog adm 0 août 14 2021 syslog.1.gz-2021081508.backup
0 -rw-r----- 1 syslog adm 0 mai 15 08:23 syslog.1.gz-2022051608.backup
0 -rw------- 1 root root 0 nov. 6 2021 ubuntu-advantage-license-check.log
0 -rw------- 1 root root 0 déc. 1 2021 ubuntu-advantage.log
jacky@jacky:~$ jacky@jacky:~$ journalctl -b -p err | head -200
-- Logs begin at Wed 2021-05-19 18:21:10 CEST, end at Thu 2022-07-14 10:17:01 CEST. --
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x20) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.HEC.BIF9 due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.BAT0._BIF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _BIF (20190816/battery-556)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x20) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.HEC.BIF9 due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.BAT0._BIF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _BIF (20190816/battery-556)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS01._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS02._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS03._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS04._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS05._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS06._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS07._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS08._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS09._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS10._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS11._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS12._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS13._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS14._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SSP1._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SSP2._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SSP3._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SSP4._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x20) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.HEC.BIF9 due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.BAT0._BIF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _BIF (20190816/battery-556)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x20) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.HEC.BIF9 due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.BAT0._BIF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _BIF (20190816/battery-556)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x20) (20190816/exoparg2-393)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.HEC.BIF9 due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.BAT0._BIF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _BIF (20190816/battery-556)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:20:48 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:21:11 jacky systemd[1]: apt-daily.timer: Refusing to start, unit apt-daily.service to trigger not loaded.
juil. 13 19:21:11 jacky systemd[1]: Failed to start Daily apt download activities.
juil. 13 19:22:13 jacky gdm-password][1457]: gkr-pam: unable to locate daemon control file
juil. 13 19:22:39 jacky pulseaudio[1481]: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms)
juil. 13 19:41:24 jacky kernel: ata5.00: exception Emask 0x0 SAct 0x80e0101f SErr 0x40000 action 0x6 frozen
juil. 13 19:41:24 jacky kernel: ata5: SError: { CommWake }
juil. 13 19:41:24 jacky kernel: ata5.00: failed command: WRITE FPDMA QUEUED
juil. 13 19:41:24 jacky kernel: ata5.00: cmd 61/08:00:c8:4f:53/00:00:00:00:00/40 tag 0 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 13 19:41:24 jacky kernel: ata5.00: status: { DRDY }
juil. 13 19:41:24 jacky kernel: ata5.00: failed command: WRITE FPDMA QUEUED
juil. 13 19:41:24 jacky kernel: ata5.00: cmd 61/08:08:18:51:53/00:00:00:00:00/40 tag 1 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 13 19:41:24 jacky kernel: ata5.00: status: { DRDY }
juil. 13 19:41:24 jacky kernel: ata5.00: failed command: WRITE FPDMA QUEUED
juil. 13 19:41:24 jacky kernel: ata5.00: cmd 61/08:10:f0:54:53/00:00:00:00:00/40 tag 2 ncq dma 4096 out
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 13 19:41:24 jacky kernel: ata5.00: status: { DRDY }
juil. 13 19:41:24 jacky kernel: ata5.00: failed command: WRITE FPDMA QUEUED
juil. 13 19:41:24 jacky kernel: ata5.00: cmd 61/08:18:08:55:53/00:00:00:00:00/40 tag 3 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 13 19:41:24 jacky kernel: ata5.00: status: { DRDY }
juil. 13 19:41:24 jacky kernel: ata5.00: failed command: WRITE FPDMA QUEUED
juil. 13 19:41:24 jacky kernel: ata5.00: cmd 61/08:20:90:55:53/00:00:00:00:00/40 tag 4 ncq dma 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 13 19:41:24 jacky kernel: ata5.00: status: { DRDY }
juil. 13 19:41:24 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 13 19:41:24 jacky kernel: ata5.00: cmd 60/00:60:28:56:22/01:00:57:00:00/40 tag 12 ncq dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 13 19:41:24 jacky kernel: ata5.00: status: { DRDY }
juil. 13 19:41:24 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 13 19:41:24 jacky kernel: ata5.00: cmd 60/08:a8:70:17:d1/00:00:45:00:00/40 tag 21 ncq dma 4096 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 13 19:41:24 jacky kernel: ata5.00: status: { DRDY }
juil. 13 19:41:24 jacky kernel: ata5.00: failed command: WRITE FPDMA QUEUED
juil. 13 19:41:24 jacky kernel: ata5.00: cmd 61/08:b0:a0:4c:53/00:00:00:00:00/40 tag 22 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 13 19:41:24 jacky kernel: ata5.00: status: { DRDY }
juil. 13 19:41:24 jacky kernel: ata5.00: failed command: WRITE FPDMA QUEUED
juil. 13 19:41:24 jacky kernel: ata5.00: cmd 61/08:b8:a0:4e:53/00:00:00:00:00/40 tag 23 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 13 19:41:24 jacky kernel: ata5.00: status: { DRDY }
juil. 13 19:41:24 jacky kernel: ata5.00: failed command: WRITE FPDMA QUEUED
juil. 13 19:41:24 jacky kernel: ata5.00: cmd 61/08:f8:90:4f:53/00:00:00:00:00/40 tag 31 ncq dma 4096 out
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 13 19:41:24 jacky kernel: ata5.00: status: { DRDY }
juil. 13 19:41:24 jacky kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
juil. 13 19:41:24 jacky kernel: ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:41:24 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:41:24 jacky kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
juil. 13 19:41:24 jacky kernel: ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:41:24 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 13 19:41:24 jacky kernel: blk_update_request: I/O error, dev sda, sector 1461868072 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
juil. 14 07:36:47 jacky kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
juil. 14 07:36:47 jacky kernel: ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 14 07:36:47 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 14 07:36:47 jacky kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
juil. 14 07:36:47 jacky kernel: ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 14 07:36:47 jacky kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
juil. 14 07:36:48 jacky systemd[1]: Failed to start Refresh fwupd metadata and update motd.
juil. 14 07:38:22 jacky kernel: ata5.00: exception Emask 0x0 SAct 0x7187fa SErr 0x0 action 0x6 frozen
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 60/08:08:40:30:d4/00:00:54:00:00/40 tag 1 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 60/08:18:98:06:db/00:00:52:00:00/40 tag 3 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 60/28:20:f0:92:dd/00:00:53:00:00/40 tag 4 ncq dma 20480 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 60/08:28:98:95:dd/00:00:53:00:00/40 tag 5 ncq dma 4096 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 60/18:30:e0:a2:dd/00:00:53:00:00/40 tag 6 ncq dma 12288 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 60/08:38:60:59:15/00:00:54:00:00/40 tag 7 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 60/08:40:78:64:15/00:00:54:00:00/40 tag 8 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 60/80:48:80:34:89/00:00:54:00:00/40 tag 9 ncq dma 65536 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: WRITE FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 61/08:50:50:04:d8/00:00:52:00:00/40 tag 10 ncq dma 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 60/20:78:e0:f0:0b/00:00:54:00:00/40 tag 15 ncq dma 16384 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 60/08:80:28:12:11/00:00:49:00:00/40 tag 16 ncq dma 4096 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 60/10:a0:08:25:50/00:00:4a:00:00/40 tag 20 ncq dma 8192 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 60/08:a8:18:25:50/00:00:4a:00:00/40 tag 21 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ata5.00: failed command: READ FPDMA QUEUED
juil. 14 07:38:22 jacky kernel: ata5.00: cmd 60/e8:b0:20:25:50/00:00:4a:00:00/40 tag 22 ncq dma 118784 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
juil. 14 07:38:22 jacky kernel: ata5.00: status: { DRDY }
juil. 14 07:38:22 jacky kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
juil. 14 07:38:22 jacky kernel: ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
jacky@jacky:~$ jacky@jacky:~$ journalctl -b | tail -200
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0759] dhcp4 (enp4s0): option requested_host_name => '1'
juil. 14 08:58:25 jacky avahi-daemon[812]: Registering new address record for 192.168.1.11 on enp4s0.IPv4.
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0759] dhcp4 (enp4s0): option requested_interface_mtu => '1'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0759] dhcp4 (enp4s0): option requested_ms_classless_static_routes => '1'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0759] dhcp4 (enp4s0): option requested_nis_domain => '1'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0760] dhcp4 (enp4s0): option requested_nis_servers => '1'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0760] dhcp4 (enp4s0): option requested_ntp_servers => '1'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0760] dhcp4 (enp4s0): option requested_rfc3442_classless_static_routes => '1'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0760] dhcp4 (enp4s0): option requested_root_path => '1'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0760] dhcp4 (enp4s0): option requested_routers => '1'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0760] dhcp4 (enp4s0): option requested_static_routes => '1'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0761] dhcp4 (enp4s0): option requested_subnet_mask => '1'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0761] dhcp4 (enp4s0): option requested_time_offset => '1'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0761] dhcp4 (enp4s0): option requested_wpad => '1'
juil. 14 08:58:25 jacky dbus-daemon[816]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.12' (uid=0 pid=817 comm="/usr/sbin/NetworkManager --no-daemon " label="unconfined")
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0761] dhcp4 (enp4s0): option routers => '192.168.1.1'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0761] dhcp4 (enp4s0): option subnet_mask => '255.255.255.0'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0761] dhcp4 (enp4s0): state changed unknown -> bound
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0799] device (enp4s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
juil. 14 08:58:25 jacky systemd[1]: Starting Network Manager Script Dispatcher Service...
juil. 14 08:58:25 jacky dbus-daemon[816]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
juil. 14 08:58:25 jacky systemd[1]: Started Network Manager Script Dispatcher Service.
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0937] device (enp4s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0940] device (enp4s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0945] manager: NetworkManager state is now CONNECTED_LOCAL
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0957] manager: NetworkManager state is now CONNECTED_SITE
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0958] policy: set 'Connexion filaire 1' (enp4s0) as default for IPv4 routing and DNS
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0964] device (enp4s0): Activation: successful, device activated.
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.0971] manager: NetworkManager state is now CONNECTED_GLOBAL
juil. 14 08:58:25 jacky /usr/lib/gdm3/gdm-x-session[1727]: kdeconnect.core: Broadcasting identity packet
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.3644] dhcp6 (enp4s0): activation: beginning transaction (timeout in 45 seconds)
juil. 14 08:58:25 jacky avahi-daemon[812]: Leaving mDNS multicast group on interface enp4s0.IPv6 with address fe80::a28d:42da:369e:86f1.
juil. 14 08:58:25 jacky avahi-daemon[812]: Joining mDNS multicast group on interface enp4s0.IPv6 with address 2a01:cb1c:661:5a00:b4b8:de2e:357f:e7c.
juil. 14 08:58:25 jacky avahi-daemon[812]: Registering new address record for 2a01:cb1c:661:5a00:b4b8:de2e:357f:e7c on enp4s0.*.
juil. 14 08:58:25 jacky avahi-daemon[812]: Withdrawing address record for fe80::a28d:42da:369e:86f1 on enp4s0.
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.3653] policy: set 'Connexion filaire 1' (enp4s0) as default for IPv6 routing and DNS
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.3663] dhcp6 (enp4s0): option dhcp6_domain_search => 'home'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.3663] dhcp6 (enp4s0): option dhcp6_name_servers => '2a01:cb1c:661:5a00:1206:45ff:fec8:f388'
juil. 14 08:58:25 jacky NetworkManager[817]: <info> [1657781905.3663] dhcp6 (enp4s0): state changed unknown -> bound
juil. 14 08:58:26 jacky avahi-daemon[812]: Registering new address record for 2a01:cb1c:661:5a00:b839:4e12:6d75:2b87 on enp4s0.*.
juil. 14 08:58:30 jacky whoopsie[961]: [08:58:30] The default IPv4 route is: /org/freedesktop/NetworkManager/ActiveConnection/5
juil. 14 08:58:30 jacky whoopsie[961]: [08:58:30] Not a paid data plan: /org/freedesktop/NetworkManager/ActiveConnection/5
juil. 14 08:58:30 jacky whoopsie[961]: [08:58:30] Found usable connection: /org/freedesktop/NetworkManager/ActiveConnection/5
juil. 14 08:58:30 jacky whoopsie[961]: [08:58:30] online
juil. 14 08:58:31 jacky /usr/lib/gdm3/gdm-x-session[1727]: kdeconnect.core: Broadcasting identity packet
juil. 14 08:58:35 jacky systemd[1]: NetworkManager-dispatcher.service: Succeeded.
juil. 14 09:02:22 jacky systemd-timesyncd[783]: Initial synchronization to time server [2620:2d:4000:1::3f]:123 (ntp.ubuntu.com).
juil. 14 09:06:40 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:06:40 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:09:51 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:09:51 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:09:53 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:09:53 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:09:57 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:09:57 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:10:13 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:10:13 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:10:13 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:10:13 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:10:18 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:10:18 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:10:18 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:10:18 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:10:18 jacky rtkit-daemon[1153]: Successfully made thread 16723 of process 16563 owned by '1000' RT at priority 10.
juil. 14 09:10:18 jacky rtkit-daemon[1153]: Supervising 5 threads of 3 processes of 1 users.
juil. 14 09:11:08 jacky rtkit-daemon[1153]: Supervising 5 threads of 3 processes of 1 users.
juil. 14 09:11:08 jacky rtkit-daemon[1153]: Supervising 5 threads of 3 processes of 1 users.
juil. 14 09:11:08 jacky rtkit-daemon[1153]: Supervising 5 threads of 3 processes of 1 users.
juil. 14 09:11:08 jacky rtkit-daemon[1153]: Supervising 5 threads of 3 processes of 1 users.
juil. 14 09:11:20 jacky rtkit-daemon[1153]: Supervising 5 threads of 3 processes of 1 users.
juil. 14 09:11:20 jacky rtkit-daemon[1153]: Supervising 5 threads of 3 processes of 1 users.
juil. 14 09:12:27 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:27 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:27 jacky /usr/lib/gdm3/gdm-x-session[16860]: [2022-07-14T07:12:27Z ERROR mp4parse] Found 2 nul bytes in "\u{0}\u{0}"
juil. 14 09:12:27 jacky /usr/lib/gdm3/gdm-x-session[16860]: [2022-07-14T07:12:27Z ERROR mp4parse] Found 2 nul bytes in "\u{0}\u{0}"
juil. 14 09:12:27 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:27 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:27 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:27 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:27 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:27 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:28 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:28 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:33 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:33 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:33 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:33 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:52 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:52 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:58 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:58 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:58 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:12:58 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:15:58 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:15:58 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:16:41 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:16:41 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:17:01 jacky CRON[17544]: pam_unix(cron:session): session opened for user root by (uid=0)
juil. 14 09:17:01 jacky CRON[17545]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
juil. 14 09:17:01 jacky CRON[17544]: pam_unix(cron:session): session closed for user root
juil. 14 09:17:14 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:17:14 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:17:14 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:17:14 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:17:16 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:17:16 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:17:23 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:17:23 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:21:13 jacky sudo[17795]: jacky : TTY=pts/0 ; PWD=/home/jacky ; USER=root ; COMMAND=/usr/bin/snap remove core18 --revision=2344
juil. 14 09:21:13 jacky sudo[17795]: pam_unix(sudo:session): session opened for user root by (uid=0)
juil. 14 09:21:13 jacky systemd[1472]: snap-core18-2344.mount: Succeeded.
juil. 14 09:21:13 jacky systemd[1]: snap-core18-2344.mount: Succeeded.
juil. 14 09:21:13 jacky systemd[1]: Reloading.
juil. 14 09:21:14 jacky sudo[17795]: pam_unix(sudo:session): session closed for user root
juil. 14 09:21:14 jacky sudo[17851]: jacky : TTY=pts/0 ; PWD=/home/jacky ; USER=root ; COMMAND=/usr/bin/snap remove core20 --revision=1494
juil. 14 09:21:14 jacky sudo[17851]: pam_unix(sudo:session): session opened for user root by (uid=0)
juil. 14 09:21:14 jacky systemd[1]: snap-core20-1494.mount: Succeeded.
juil. 14 09:21:14 jacky systemd[1472]: snap-core20-1494.mount: Succeeded.
juil. 14 09:21:15 jacky systemd[1]: Reloading.
juil. 14 09:21:15 jacky sudo[17851]: pam_unix(sudo:session): session closed for user root
juil. 14 09:21:15 jacky sudo[17900]: jacky : TTY=pts/0 ; PWD=/home/jacky ; USER=root ; COMMAND=/usr/bin/snap remove core22 --revision=165
juil. 14 09:21:15 jacky sudo[17900]: pam_unix(sudo:session): session opened for user root by (uid=0)
juil. 14 09:21:16 jacky systemd[1472]: snap-core22-165.mount: Succeeded.
juil. 14 09:21:16 jacky systemd[1]: snap-core22-165.mount: Succeeded.
juil. 14 09:21:16 jacky systemd[1]: Reloading.
juil. 14 09:21:16 jacky sudo[17900]: pam_unix(sudo:session): session closed for user root
juil. 14 09:21:16 jacky sudo[17945]: jacky : TTY=pts/0 ; PWD=/home/jacky ; USER=root ; COMMAND=/usr/bin/snap remove gnome-3-38-2004 --revision=106
juil. 14 09:21:16 jacky sudo[17945]: pam_unix(sudo:session): session opened for user root by (uid=0)
juil. 14 09:21:17 jacky systemd[1472]: snap-gnome\x2d3\x2d38\x2d2004-106.mount: Succeeded.
juil. 14 09:21:17 jacky systemd[1]: snap-gnome\x2d3\x2d38\x2d2004-106.mount: Succeeded.
juil. 14 09:21:17 jacky systemd[1]: Reloading.
juil. 14 09:21:17 jacky sudo[17945]: pam_unix(sudo:session): session closed for user root
juil. 14 09:21:17 jacky sudo[17990]: jacky : TTY=pts/0 ; PWD=/home/jacky ; USER=root ; COMMAND=/usr/bin/snap remove gtk-common-themes --revision=1534
juil. 14 09:21:17 jacky sudo[17990]: pam_unix(sudo:session): session opened for user root by (uid=0)
juil. 14 09:21:18 jacky systemd[1472]: snap-gtk\x2dcommon\x2dthemes-1534.mount: Succeeded.
juil. 14 09:21:18 jacky systemd[1]: snap-gtk\x2dcommon\x2dthemes-1534.mount: Succeeded.
juil. 14 09:21:18 jacky systemd[1]: Reloading.
juil. 14 09:21:18 jacky sudo[17990]: pam_unix(sudo:session): session closed for user root
juil. 14 09:21:18 jacky sudo[18035]: jacky : TTY=pts/0 ; PWD=/home/jacky ; USER=root ; COMMAND=/usr/bin/snap remove htop --revision=3414
juil. 14 09:21:18 jacky sudo[18035]: pam_unix(sudo:session): session opened for user root by (uid=0)
juil. 14 09:21:19 jacky systemd[1472]: snap-htop-3414.mount: Succeeded.
juil. 14 09:21:19 jacky systemd[1]: snap-htop-3414.mount: Succeeded.
juil. 14 09:21:19 jacky systemd[1]: Reloading.
juil. 14 09:21:20 jacky sudo[18035]: pam_unix(sudo:session): session closed for user root
juil. 14 09:21:20 jacky sudo[18083]: jacky : TTY=pts/0 ; PWD=/home/jacky ; USER=root ; COMMAND=/usr/bin/snap remove snapd --revision=16010
juil. 14 09:21:20 jacky sudo[18083]: pam_unix(sudo:session): session opened for user root by (uid=0)
juil. 14 09:21:20 jacky systemd[1472]: snap-snapd-16010.mount: Succeeded.
juil. 14 09:21:20 jacky systemd[1]: snap-snapd-16010.mount: Succeeded.
juil. 14 09:21:20 jacky systemd[1]: Reloading.
juil. 14 09:21:21 jacky sudo[18083]: pam_unix(sudo:session): session closed for user root
juil. 14 09:21:21 jacky sudo[18136]: jacky : TTY=pts/0 ; PWD=/home/jacky ; USER=root ; COMMAND=/usr/bin/snap remove spotify --revision=58
juil. 14 09:21:21 jacky sudo[18136]: pam_unix(sudo:session): session opened for user root by (uid=0)
juil. 14 09:21:21 jacky systemd[1]: snap-spotify-58.mount: Succeeded.
juil. 14 09:21:21 jacky systemd[1472]: snap-spotify-58.mount: Succeeded.
juil. 14 09:21:22 jacky systemd[1]: Reloading.
juil. 14 09:21:22 jacky sudo[18136]: pam_unix(sudo:session): session closed for user root
juil. 14 09:21:42 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:21:42 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:30:01 jacky CRON[18275]: pam_unix(cron:session): session opened for user root by (uid=0)
juil. 14 09:30:01 jacky CRON[18276]: (root) CMD ([ -x /etc/init.d/anacron ] && if [ ! -d /run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start >/dev/null; fi)
juil. 14 09:30:01 jacky CRON[18275]: pam_unix(cron:session): session closed for user root
juil. 14 09:34:41 jacky systemd[1]: Started Run anacron jobs.
juil. 14 09:34:41 jacky anacron[18304]: Anacron 2.3 started on 2022-07-14
juil. 14 09:34:41 jacky anacron[18304]: Normal exit (0 jobs run)
juil. 14 09:34:41 jacky systemd[1]: anacron.service: Succeeded.
juil. 14 09:35:55 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:35:55 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:35:55 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:35:55 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:35:57 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:35:57 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:35:59 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:35:59 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:35:59 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:35:59 jacky rtkit-daemon[1153]: Supervising 4 threads of 2 processes of 1 users.
juil. 14 09:35:59 jacky rtkit-daemon[1153]: Successfully made thread 18468 of process 18206 owned by '1000' RT at priority 10.
juil. 14 09:35:59 jacky rtkit-daemon[1153]: Supervising 5 threads of 3 processes of 1 users.
juil. 14 09:39:10 jacky rtkit-daemon[1153]: Supervising 5 threads of 3 processes of 1 users.
juil. 14 09:39:10 jacky rtkit-daemon[1153]: Supervising 5 threads of 3 processes of 1 users.
juil. 14 09:51:28 jacky sudo[18576]: pam_unix(sudo:auth): authentication failure; logname= uid=1000 euid=0 tty=/dev/pts/0 ruser=jacky rhost= user=jacky
juil. 14 09:51:37 jacky sudo[18576]: jacky : TTY=pts/0 ; PWD=/home/jacky ; USER=root ; COMMAND=/usr/bin/dmesg
juil. 14 09:51:37 jacky sudo[18576]: pam_unix(sudo:session): session opened for user root by (uid=0)
juil. 14 09:51:37 jacky sudo[18576]: pam_unix(sudo:session): session closed for user root
juil. 14 09:52:02 jacky sudo[18597]: jacky : TTY=pts/0 ; PWD=/home/jacky ; USER=root ; COMMAND=/usr/bin/dmesg
juil. 14 09:52:02 jacky sudo[18597]: pam_unix(sudo:session): session opened for user root by (uid=0)
juil. 14 09:52:02 jacky sudo[18597]: pam_unix(sudo:session): session closed for user root
juil. 14 09:53:18 jacky sudo[18621]: jacky : TTY=pts/0 ; PWD=/home/jacky ; USER=root ; COMMAND=/usr/bin/dmesg
juil. 14 09:53:18 jacky sudo[18621]: pam_unix(sudo:session): session opened for user root by (uid=0)
juil. 14 09:53:18 jacky sudo[18621]: pam_unix(sudo:session): session closed for user root
juil. 14 09:54:11 jacky dbus-daemon[816]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.441' (uid=1000 pid=18610 comm="/usr/bin/xfce4-terminal " label="unconfined")
juil. 14 09:54:11 jacky systemd[1]: Starting Hostname Service...
juil. 14 09:54:11 jacky dbus-daemon[816]: [system] Successfully activated service 'org.freedesktop.hostname1'
juil. 14 09:54:11 jacky systemd[1]: Started Hostname Service.
juil. 14 09:54:41 jacky systemd[1]: systemd-hostnamed.service: Succeeded.
juil. 14 10:05:22 jacky sudo[18741]: jacky : TTY=pts/0 ; PWD=/home/jacky ; USER=root ; COMMAND=/usr/bin/dmesg
juil. 14 10:05:22 jacky sudo[18741]: pam_unix(sudo:session): session opened for user root by (uid=0)
juil. 14 10:05:22 jacky sudo[18741]: pam_unix(sudo:session): session closed for user root
juil. 14 10:17:01 jacky CRON[18806]: pam_unix(cron:session): session opened for user root by (uid=0)
juil. 14 10:17:01 jacky CRON[18807]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
juil. 14 10:17:01 jacky CRON[18806]: pam_unix(cron:session): session closed for user root
jacky@jacky:~$ ML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502485] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS12._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502518] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502521]
Initialized Local Variables for Method [XPLD]:
[ 0.502522] Local0: 00000000858e8113 <Obj> Integer 0000000000000000
[ 0.502524] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502524] Arg0: 0000000089664ee3 <Obj> Integer 000000000000000C
[ 0.502527] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502530] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS13._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502563] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502566]
Initialized Local Variables for Method [XPLD]:
[ 0.502566] Local0: 00000000f8928a78 <Obj> Integer 0000000000000001
[ 0.502569] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502569] Arg0: 0000000000a989ad <Obj> Integer 000000000000000D
[ 0.502571] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502575] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS14._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502715] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.502716] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.502717] usb usb4: Product: xHCI Host Controller
[ 0.502718] usb usb4: Manufacturer: Linux 5.4.0-122-generic xhci-hcd
[ 0.502718] usb usb4: SerialNumber: 0000:00:14.0
[ 0.502780] hub 4-0:1.0: USB hub found
[ 0.502789] hub 4-0:1.0: 4 ports detected
[ 0.502823] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502827]
Initialized Local Variables for Method [XPLD]:
[ 0.502828] Local0: 0000000077d7decc <Obj> Integer 0000000000000001
[ 0.502830] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502831] Arg0: 0000000089664ee3 <Obj> Integer 000000000000000F
[ 0.502833] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502837] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SSP1._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502874] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502877]
Initialized Local Variables for Method [XPLD]:
[ 0.502877] Local0: 000000006c856164 <Obj> Integer 0000000000000001
[ 0.502880] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502880] Arg0: 0000000000a989ad <Obj> Integer 0000000000000010
[ 0.502883] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502886] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SSP2._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502921] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502924]
Initialized Local Variables for Method [XPLD]:
[ 0.502924] Local0: 0000000046134830 <Obj> Integer 0000000000000000
[ 0.502927] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502927] Arg0: 0000000089664ee3 <Obj> Integer 0000000000000011
[ 0.502930] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502933] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SSP3._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502967] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20190816/exoparg2-393)
[ 0.502971]
Initialized Local Variables for Method [XPLD]:
[ 0.502971] Local0: 00000000d338689f <Obj> Integer 0000000000000000
[ 0.502973] Initialized Arguments for Method [XPLD]: (1 arguments defined for method invocation)
[ 0.502974] Arg0: 0000000000a989ad <Obj> Integer 0000000000000012
[ 0.502976] ACPI Error: Aborting method \_SB.XPLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.502979] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SSP4._PLD due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.503066] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.506204] i8042: Detected active multiplexing controller, rev 1.1
[ 0.507445] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.507448] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.507467] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.507479] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.507491] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.507558] mousedev: PS/2 mouse device common for all mice
[ 0.507654] rtc_cmos 00:01: RTC can wake from S4
[ 0.507805] rtc_cmos 00:01: registered as rtc0
[ 0.507815] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.507820] i2c /dev entries driver
[ 0.507851] device-mapper: uevent: version 1.0.3
[ 0.507890] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.507902] platform eisa.0: Probing EISA bus 0
[ 0.507906] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.507907] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.507907] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.507908] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.507908] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.507909] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.507910] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.507910] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.507911] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.507912] platform eisa.0: EISA: Detected 0 cards
[ 0.507915] intel_pstate: Intel P-state driver initializing
[ 0.508615] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.508618] EFI Variables Facility v0.08 2004-May-17
[ 0.511994] drop_monitor: Initializing network drop monitor service
[ 0.512111] NET: Registered protocol family 10
[ 0.515142] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.518135] Segment Routing with IPv6
[ 0.518154] NET: Registered protocol family 17
[ 0.518242] Key type dns_resolver registered
[ 0.518679] RAS: Correctable Errors collector initialized.
[ 0.518713] microcode: sig=0x306c3, pf=0x20, revision=0x28
[ 0.518835] microcode: Microcode Update Driver: v2.2.
[ 0.518840] IPI shorthand broadcast: enabled
[ 0.518846] sched_clock: Marking stable (518582057, 250119)->(523261594, -4429418)
[ 0.518952] registered taskstats version 1
[ 0.518960] Loading compiled-in X.509 certificates
[ 0.519772] Loaded X.509 cert 'Build time autogenerated kernel key: 14c1fcd338762a2eeacd3b20a829b037b9235452'
[ 0.520445] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 0.521050] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 0.521051] blacklist: Loading compiled-in revocation X.509 certificates
[ 0.521065] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 0.521090] zswap: loaded using pool lzo/zbud
[ 0.521194] Key type ._fscrypt registered
[ 0.521195] Key type .fscrypt registered
[ 0.526000] Key type big_key registered
[ 0.528016] Key type encrypted registered
[ 0.528017] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.528262] integrity: Loading X.509 certificate: UEFI:db
[ 0.528494] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[ 0.528494] integrity: Loading X.509 certificate: UEFI:db
[ 0.528664] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[ 0.528664] integrity: Loading X.509 certificate: UEFI:db
[ 0.528682] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.528682] integrity: Loading X.509 certificate: UEFI:db
[ 0.528696] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.528696] integrity: Loading X.509 certificate: UEFI:db
[ 0.528869] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 0.529294] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[ 0.529521] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 0.529522] ima: No TPM chip found, activating TPM-bypass!
[ 0.529527] ima: Allocated hash algorithm: sha1
[ 0.529532] ima: No architecture policies found
[ 0.529540] evm: Initialising EVM extended attributes:
[ 0.529541] evm: security.selinux
[ 0.529541] evm: security.SMACK64
[ 0.529542] evm: security.SMACK64EXEC
[ 0.529542] evm: security.SMACK64TRANSMUTE
[ 0.529542] evm: security.SMACK64MMAP
[ 0.529543] evm: security.apparmor
[ 0.529543] evm: security.ima
[ 0.529544] evm: security.capability
[ 0.529544] evm: HMAC attrs: 0x1
[ 0.530173] PM: Magic number: 14:58:340
[ 0.530175] PM: hash matches drivers/base/power/main.c:1831
[ 0.530288] rtc_cmos 00:01: setting system clock to 2022-07-13T17:20:36 UTC (1657732836)
[ 0.542387] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 0.542390] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 0.544477] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x20) (20190816/exoparg2-393)
[ 0.544487]
Initialized Local Variables for Method [BIF9]:
[ 0.544488] Local0: 000000003388a6ab <Obj> Package 000000003388a6ab
[ 0.544492] No Arguments are initialized for method [BIF9]
[ 0.544495] ACPI Error: Aborting method \_SB.PCI0.LPCB.HEC.BIF9 due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.544502] ACPI Error: Aborting method \_SB.PCI0.BAT0._BIF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.544509] ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _BIF (20190816/battery-556)
[ 0.632460] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x20) (20190816/exoparg2-393)
[ 0.632469]
Initialized Local Variables for Method [BIF9]:
[ 0.632470] Local0: 00000000cc1a8e70 <Obj> Package 00000000cc1a8e70
[ 0.632475] No Arguments are initialized for method [BIF9]
[ 0.632477] ACPI Error: Aborting method \_SB.PCI0.LPCB.HEC.BIF9 due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.632484] ACPI Error: Aborting method \_SB.PCI0.BAT0._BIF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.632491] ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _BIF (20190816/battery-556)
[ 0.720458] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x20) (20190816/exoparg2-393)
[ 0.720467]
Initialized Local Variables for Method [BIF9]:
[ 0.720468] Local0: 0000000032fb6532 <Obj> Package 0000000032fb6532
[ 0.720473] No Arguments are initialized for method [BIF9]
[ 0.720475] ACPI Error: Aborting method \_SB.PCI0.LPCB.HEC.BIF9 due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.720482] ACPI Error: Aborting method \_SB.PCI0.BAT0._BIF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 0.720489] ACPI Error: AE_AML_BUFFER_LIMIT, Evaluating _BIF (20190816/battery-556)
[ 0.736208] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.745427] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 0.745430] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 0.749187] Freeing unused decrypted memory: 2040K
[ 0.749602] Freeing unused kernel image memory: 2756K
[ 0.749648] Write protecting the kernel read-only data: 26624k
[ 0.750059] Freeing unused kernel image memory: 2008K
[ 0.750230] Freeing unused kernel image memory: 744K
[ 0.756180] usb 3-5: new high-speed USB device number 2 using xhci_hcd
[ 0.756189] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.757470] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.757471] x86/mm: Checking user space page tables
[ 0.764562] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.764563] Run /init as init process
[ 0.825236] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 0.839522] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000184F (\GPIS) (20190816/utaddress-204)
[ 0.839528] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIX) (20190816/utaddress-204)
[ 0.839532] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-204)
[ 0.839536] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.839538] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPXX) (20190816/utaddress-204)
[ 0.839541] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 0.839544] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.839545] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPXX) (20190816/utaddress-204)
[ 0.839549] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204)
[ 0.839552] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 0.839555] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.839555] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPXX) (20190816/utaddress-204)
[ 0.839559] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204)
[ 0.839562] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 0.839565] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.839565] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.839860] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 0.839891] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.841895] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.845518] ahci 0000:00:1f.2: version 3.0
[ 0.845750] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[ 0.845753] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.856585] scsi host0: ahci
[ 0.856679] scsi host1: ahci
[ 0.856765] scsi host2: ahci
[ 0.856841] scsi host3: ahci
[ 0.856925] scsi host4: ahci
[ 0.856958] ata1: DUMMY
[ 0.856958] ata2: DUMMY
[ 0.856961] ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 31
[ 0.856961] ata4: DUMMY
[ 0.856963] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 31
[ 0.857754] r8169 0000:04:00.0 eth0: RTL8168g/8111g, d8:50:e6:df:46:74, XID 4c0, IRQ 32
[ 0.857757] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.900525] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[ 0.900527] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.900789] hub 1-1:1.0: USB hub found
[ 0.900879] hub 1-1:1.0: 6 ports detected
[ 0.916625] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[ 0.916627] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.916886] hub 2-1:1.0: USB hub found
[ 0.916986] hub 2-1:1.0: 8 ports detected
[ 0.949452] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 0.949454] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 1.157434] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 1.157437] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 1.159094] usb 3-5: New USB device found, idVendor=0bda, idProduct=0138, bcdDevice=38.82
[ 1.159096] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.159098] usb 3-5: Product: USB2.0-CRW
[ 1.159099] usb 3-5: Manufacturer: Generic
[ 1.159100] usb 3-5: SerialNumber: 20090516388200000
[ 1.171152] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.171170] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.172726] ata3.00: ATAPI: MATSHITADVD-RAM UJ8E2 S, 1.00, max UDMA/133
[ 1.174234] ata3.00: configured for UDMA/133
[ 1.176200] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8E2 S 1.00 PQ: 0 ANSI: 5
[ 1.177800] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[ 1.177810]
Initialized Local Variables for Method [GTFB]:
[ 1.177810] Local0: 00000000f5d84bad <Obj> Integer 00000000000000A8
[ 1.177815] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[ 1.177816] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[ 1.177821] Arg1: 000000006e729d2d <Obj> Integer 0000000000000000
[ 1.177825] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 1.177830] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 1.177836] ata5.00: _GTF evaluation failed (AE 0x300a)
[ 1.178061] ata5.00: ATA-8: ST750LM022 HN-M750MBB, 2AR20002, max UDMA/133
[ 1.178063] ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.184746] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[ 1.184755]
Initialized Local Variables for Method [GTFB]:
[ 1.184756] Local0: 000000006e729d2d <Obj> Integer 00000000000000A8
[ 1.184761] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[ 1.184762] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[ 1.184767] Arg1: 0000000012e546a0 <Obj> Integer 0000000000000000
[ 1.184770] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 1.184776] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 1.184782] ata5.00: _GTF evaluation failed (AE 0x300a)
[ 1.185014] ata5.00: configured for UDMA/133
[ 1.234290] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.234292] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.268248] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.268348] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 1.268656] scsi 4:0:0:0: Direct-Access ATA ST750LM022 HN-M7 0002 PQ: 0 ANSI: 5
[ 1.268930] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 1.269044] sd 4:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 1.269048] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 1.269084] sd 4:0:0:0: [sda] Write Protect is off
[ 1.269085] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.269117] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.292181] usb 3-10: new high-speed USB device number 3 using xhci_hcd
[ 1.312209] tsc: Refined TSC clocksource calibration: 2394.455 MHz
[ 1.312218] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c1579c6, max_idle_ns: 440795259439 ns
[ 1.312247] clocksource: Switched to clocksource tsc
[ 1.348342] sda: sda1 sda2
[ 1.361453] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 1.361455] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 1.372935] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.374919] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 1.543504] usb 3-10: New USB device found, idVendor=0bda, idProduct=570c, bcdDevice= 0.04
[ 1.543517] usb 3-10: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.543519] usb 3-10: Product: USB Camera
[ 1.543520] usb 3-10: Manufacturer: 04081-00023800GK3B1A00A3Z
[ 1.543521] usb 3-10: SerialNumber: 200901010001
[ 1.565426] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 1.565429] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 1.672211] usb 3-14: new full-speed USB device number 4 using xhci_hcd
[ 1.774719] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 1.774721] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 1.825850] usb 3-14: New USB device found, idVendor=248a, idProduct=8514, bcdDevice= 1.00
[ 1.825852] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.825854] usb 3-14: Product: Wireless Receiver
[ 1.825855] usb 3-14: Manufacturer: Telink
[ 1.831743] usbcore: registered new interface driver usb-storage
[ 1.832590] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.832834] usbcore: registered new interface driver uas
[ 1.833740] ums-realtek 3-5:1.0: USB Mass Storage device detected
[ 1.837220] scsi host5: usb-storage 3-5:1.0
[ 1.837290] usbcore: registered new interface driver ums-realtek
[ 1.839887] usbcore: registered new interface driver usbhid
[ 1.839887] usbhid: USB HID core driver
[ 1.842464] input: Telink Wireless Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:248A:8514.0001/input/input10
[ 1.842540] input: Telink Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:248A:8514.0001/input/input11
[ 1.900402] input: Telink Wireless Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:248A:8514.0001/input/input12
[ 1.900583] hid-generic 0003:248A:8514.0001: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:14.0-14/input0
[ 1.900750] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:248A:8514.0002/input/input13
[ 1.960429] hid-generic 0003:248A:8514.0002: input,hidraw1: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:14.0-14/input1
[ 1.981405] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 1.981406] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 2.025009] fbcon: Taking over console
[ 2.025079] Console: switching to colour frame buffer device 100x37
[ 2.185456] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 2.185458] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 2.851148] scsi 5:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 2.851477] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 2.907272] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 5.823886] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.914309] systemd[1]: Inserted module 'autofs4'
[ 8.135033] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 8.152297] systemd[1]: Detected architecture x86-64.
[ 8.179432] systemd[1]: Set hostname to <jacky>.
[ 11.991451] systemd[1]: Created slice system-modprobe.slice.
[ 11.991639] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 11.991777] systemd[1]: Created slice User and Session Slice.
[ 11.991826] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.991983] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.992015] systemd[1]: Reached target User and Group Name Lookups.
[ 11.992026] systemd[1]: Reached target Remote File Systems.
[ 11.992033] systemd[1]: Reached target Slices.
[ 11.992123] systemd[1]: Listening on Syslog Socket.
[ 11.992208] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 11.992249] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 11.992396] systemd[1]: Listening on Journal Audit Socket.
[ 11.992456] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.992525] systemd[1]: Listening on Journal Socket.
[ 11.992593] systemd[1]: Listening on udev Control Socket.
[ 11.992640] systemd[1]: Listening on udev Kernel Socket.
[ 11.993272] systemd[1]: Mounting Huge Pages File System...
[ 11.993892] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.994612] systemd[1]: Mounting Kernel Debug File System...
[ 11.995267] systemd[1]: Mounting Kernel Trace File System...
[ 11.996582] systemd[1]: Starting Journal Service...
[ 12.033724] systemd[1]: Starting Set the console keyboard layout...
[ 12.034507] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 12.035096] systemd[1]: Starting Load Kernel Module drm...
[ 12.035703] systemd[1]: Started Nameserver information manager.
[ 12.035796] systemd[1]: Reached target Network (Pre).
[ 12.151467] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 12.151519] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 12.286411] systemd[1]: Starting Load Kernel Modules...
[ 12.287160] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 12.287809] systemd[1]: Starting udev Coldplug all Devices...
[ 12.288472] systemd[1]: Starting Uncomplicated firewall...
[ 12.289914] systemd[1]: Mounted Huge Pages File System.
[ 12.290007] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.290084] systemd[1]: Mounted Kernel Debug File System.
[ 12.290156] systemd[1]: Mounted Kernel Trace File System.
[ 12.297736] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 12.469756] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 12.471126] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 12.471763] systemd[1]: Activating swap /swapfile...
[ 12.851721] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 12.851793] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 12.852686] systemd[1]: Starting Load/Save Random Seed...
[ 12.853424] systemd[1]: Starting Create System Users...
[ 12.853638] systemd[1]: Started Journal Service.
[ 12.954975] lp: driver loaded but no devices found
[ 12.974207] systemd-journald[315]: Received client request to flush runtime journal.
[ 13.010034] ppdev: user-space parallel port driver
[ 13.160200] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
[ 13.651985] systemd-journald[315]: File /var/log/journal/e10886ee0e6c40d4ad9e35543de85915/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 13.688397] IPMI message handler: version 39.2
[ 13.850762] ipmi device interface
[ 19.140701] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input16
[ 19.285858] asus_wmi: ASUS WMI generic driver loaded
[ 19.316941] pci_bus 0000:02: Allocating resources
[ 19.316948] pci_bus 0000:03: Allocating resources
[ 19.316954] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 19.316956] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 19.316961] pci_bus 0000:04: Allocating resources
[ 19.316973] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xcf600000-0xcf7fffff 64bit pref]
[ 19.316975] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
[ 19.317078] pci_bus 0000:01: Allocating resources
[ 19.328264] asus_wmi: Initialization: 0x1
[ 19.328341] asus_wmi: BIOS WMI version: 7.7
[ 19.328430] asus_wmi: SFUN value: 0x4a00f7
[ 19.328433] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 19.328435] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[ 19.331439] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input17
[ 19.521904] EDAC ie31200: No ECC support
[ 19.521926] EDAC ie31200: No ECC support
[ 19.691808] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 19.691810] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 19.691810] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 19.691811] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 19.691812] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 20.494731] cryptd: max_cpu_qlen set to 1000
[ 20.798508] AVX2 version of gcm_enc/dec engaged.
[ 20.798510] AES CTR mode by8 optimization enabled
[ 20.959446] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 20.959696] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 23.230833] ath9k 0000:03:00.0: enabling device (0000 -> 0002)
[ 23.230942] ath: phy0: Disable PLL PowerSave
[ 23.237125] ath: phy0: Enable LNA combining
[ 23.238288] ath: phy0: ASPM enabled: 0x42
[ 23.238290] ath: EEPROM regdomain: 0x60
[ 23.238290] ath: EEPROM indicates we should expect a direct regpair map
[ 23.238292] ath: Country alpha2 being used: 00
[ 23.238292] ath: Regpair used: 0x60
[ 23.238944] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 23.239329] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffae9781100000, irq=18
[ 23.320088] MXM: GUID detected in BIOS
[ 23.320172] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59)
[ 23.320397] pci 0000:00:02.0: optimus capabilities: enabled, status dynamic power,
[ 23.320429] ACPI Warning: \_SB.PCI0.P0P2.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59)
[ 23.320617] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
[ 23.320620] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.P0P2.VGA_ handle
[ 23.320642] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 23.320752] checking generic (d0000000 1d5000) vs hw (e0000000 10000000)
[ 23.320753] checking generic (d0000000 1d5000) vs hw (f0000000 2000000)
[ 23.320795] nouveau 0000:01:00.0: NVIDIA GK208 (108120a1)
[ 23.333171] nouveau 0000:01:00.0: bios: version 80.28.22.00.5b
[ 23.396827] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[ 23.461494] [TTM] Zone kernel: Available graphics memory: 4014902 KiB
[ 23.461495] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 23.461496] [TTM] Initializing pool allocator
[ 23.461499] [TTM] Initializing DMA pool allocator
[ 23.461511] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[ 23.461512] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 23.461514] nouveau 0000:01:00.0: DRM: Pointer to TMDS table not found
[ 23.461515] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 23.461974] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 23.462188] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 24.382601] checking generic (d0000000 1d5000) vs hw (d0000000 10000000)
[ 24.382602] fb0: switching to inteldrmfb from EFI VGA
[ 24.382726] Console: switching to colour dummy device 80x25
[ 24.382759] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 24.383579] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 24.383580] [drm] Driver supports precise vblank timestamp query.
[ 24.383948] vga_switcheroo: enabled
[ 24.383961] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 24.405318] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 1
[ 24.405758] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 24.405809] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:00/input/input18
[ 24.405921] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 24.408826] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input19
[ 24.447811] fbcon: i915drmfb (fb0) is primary device
[ 24.447858] Console: switching to colour frame buffer device 160x45
[ 24.447869] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 24.911516] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 25.335725] mc: Linux media interface: v0.10
[ 25.495732] videodev: Linux video capture interface: v2.00
[ 25.597588] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 25.597735] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 25.597809] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 26.002843] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 26.002906] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 26.002961] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 26.906748] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 26.906750] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 26.906751] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 26.906752] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 26.906752] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 26.906753] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
[ 26.906754] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 26.913431] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
[ 26.913489] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24
[ 27.362520] uvcvideo: Found UVC 1.00 device USB Camera (0bda:570c)
[ 27.374399] input: USB Camera: USB Camera as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input25
[ 27.374471] usbcore: registered new interface driver uvcvideo
[ 27.374472] USB Video Class driver (1.1.1)
[ 27.494147] intel_rapl_common: Found RAPL domain package
[ 27.494149] intel_rapl_common: Found RAPL domain core
[ 27.494150] intel_rapl_common: Found RAPL domain uncore
[ 27.494151] intel_rapl_common: Found RAPL domain dram
[ 27.494153] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 27.494158] intel_rapl_common: RAPL package-0 domain dram locked by BIOS
[ 34.246031] audit: type=1400 audit(1657732870.209:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=774 comm="apparmor_parser"
[ 34.246086] audit: type=1400 audit(1657732870.209:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=768 comm="apparmor_parser"
[ 34.263508] audit: type=1400 audit(1657732870.225:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=772 comm="apparmor_parser"
[ 34.263511] audit: type=1400 audit(1657732870.225:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=772 comm="apparmor_parser"
[ 34.263513] audit: type=1400 audit(1657732870.225:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=772 comm="apparmor_parser"
[ 34.278597] audit: type=1400 audit(1657732870.241:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=767 comm="apparmor_parser"
[ 34.323903] audit: type=1400 audit(1657732870.285:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=770 comm="apparmor_parser"
[ 34.339151] audit: type=1400 audit(1657732870.301:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=773 comm="apparmor_parser"
[ 34.343752] audit: type=1400 audit(1657732870.305:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=779 comm="apparmor_parser"
[ 34.343756] audit: type=1400 audit(1657732870.305:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=779 comm="apparmor_parser"
[ 41.524253] nouveau 0000:01:00.0: Enabling HDA controller
[ 51.888686] kauditd_printk_skb: 29 callbacks suppressed
[ 51.888691] audit: type=1400 audit(1657732887.853:41): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=953 comm="cups-browsed" capability=23 capname="sys_nice"
[ 54.058284] Generic FE-GE Realtek PHY r8169-0-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-0-400:00, irq=IGNORE)
[ 54.181008] r8169 0000:04:00.0 enp4s0: Link is Down
[ 57.171745] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control off
[ 57.171756] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 72.388319] nouveau 0000:01:00.0: Enabling HDA controller
[ 85.007973] rfkill: input handler disabled
[ 98.297574] systemd-journald[315]: File /var/log/journal/e10886ee0e6c40d4ad9e35543de85915/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 99.568319] nouveau 0000:01:00.0: Enabling HDA controller
[ 99.728728] rfkill: input handler enabled
[ 112.520300] nouveau 0000:01:00.0: Enabling HDA controller
[ 217.643095] audit: type=1400 audit(1657733053.605:42): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=2336 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[ 217.643099] audit: type=1400 audit(1657733053.605:43): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=2336 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 217.643102] audit: type=1400 audit(1657733053.605:44): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=2336 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 222.591508] audit: type=1400 audit(1657733058.553:45): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=2336 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[ 222.591512] audit: type=1400 audit(1657733058.553:46): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8715e4f765e0539b2baffc2b885f798" pid=2336 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[ 482.184299] nouveau 0000:01:00.0: Enabling HDA controller
[ 513.492322] nouveau 0000:01:00.0: Enabling HDA controller
[ 1246.432268] ata5.00: exception Emask 0x0 SAct 0x80e0101f SErr 0x40000 action 0x6 frozen
[ 1246.432281] ata5: SError: { CommWake }
[ 1246.432288] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432299] ata5.00: cmd 61/08:00:c8:4f:53/00:00:00:00:00/40 tag 0 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432303] ata5.00: status: { DRDY }
[ 1246.432307] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432316] ata5.00: cmd 61/08:08:18:51:53/00:00:00:00:00/40 tag 1 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432319] ata5.00: status: { DRDY }
[ 1246.432323] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432331] ata5.00: cmd 61/08:10:f0:54:53/00:00:00:00:00/40 tag 2 ncq dma 4096 out
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432334] ata5.00: status: { DRDY }
[ 1246.432338] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432346] ata5.00: cmd 61/08:18:08:55:53/00:00:00:00:00/40 tag 3 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432349] ata5.00: status: { DRDY }
[ 1246.432352] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432360] ata5.00: cmd 61/08:20:90:55:53/00:00:00:00:00/40 tag 4 ncq dma 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432364] ata5.00: status: { DRDY }
[ 1246.432368] ata5.00: failed command: READ FPDMA QUEUED
[ 1246.432376] ata5.00: cmd 60/00:60:28:56:22/01:00:57:00:00/40 tag 12 ncq dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432379] ata5.00: status: { DRDY }
[ 1246.432383] ata5.00: failed command: READ FPDMA QUEUED
[ 1246.432392] ata5.00: cmd 60/08:a8:70:17:d1/00:00:45:00:00/40 tag 21 ncq dma 4096 in
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432395] ata5.00: status: { DRDY }
[ 1246.432398] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432406] ata5.00: cmd 61/08:b0:a0:4c:53/00:00:00:00:00/40 tag 22 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432410] ata5.00: status: { DRDY }
[ 1246.432413] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432421] ata5.00: cmd 61/08:b8:a0:4e:53/00:00:00:00:00/40 tag 23 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432424] ata5.00: status: { DRDY }
[ 1246.432428] ata5.00: failed command: WRITE FPDMA QUEUED
[ 1246.432436] ata5.00: cmd 61/08:f8:90:4f:53/00:00:00:00:00/40 tag 31 ncq dma 4096 out
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1246.432439] ata5.00: status: { DRDY }
[ 1246.432446] ata5: hard resetting link
[ 1246.748410] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1246.755906] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[ 1246.755931]
Initialized Local Variables for Method [GTFB]:
[ 1246.755933] Local0: 00000000fb1d22c7 <Obj> Integer 00000000000000A8
[ 1246.755947] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[ 1246.755948] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[ 1246.755963] Arg1: 00000000e8e50443 <Obj> Integer 0000000000000000
[ 1246.755974] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 1246.755990] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 1246.756009] ata5.00: _GTF evaluation failed (AE 0x300a)
[ 1246.763918] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[ 1246.763943]
Initialized Local Variables for Method [GTFB]:
[ 1246.763945] Local0: 00000000fcf0f2a2 <Obj> Integer 00000000000000A8
[ 1246.763959] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[ 1246.763961] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[ 1246.763975] Arg1: 00000000c94b0639 <Obj> Integer 0000000000000000
[ 1246.763986] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 1246.764002] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 1246.764020] ata5.00: _GTF evaluation failed (AE 0x300a)
[ 1246.764146] ata5.00: configured for UDMA/133
[ 1246.774393] ata5.00: device reported invalid CHS sector 0
[ 1246.774399] ata5.00: device reported invalid CHS sector 0
[ 1246.774403] ata5.00: device reported invalid CHS sector 0
[ 1246.774410] ata5.00: device reported invalid CHS sector 0
[ 1246.774413] ata5.00: device reported invalid CHS sector 0
[ 1246.774450] sd 4:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1246.774456] sd 4:0:0:0: [sda] tag#12 Sense Key : Illegal Request [current]
[ 1246.774463] sd 4:0:0:0: [sda] tag#12 Add. Sense: Unaligned write command
[ 1246.774468] sd 4:0:0:0: [sda] tag#12 CDB: Read(10) 28 00 57 22 56 28 00 01 00 00
[ 1246.774475] blk_update_request: I/O error, dev sda, sector 1461868072 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[ 1246.774525] ata5: EH complete
[ 9650.545477] perf: interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 9915.972324] r8169 0000:04:00.0 enp4s0: Link is Down
[ 9946.189501] PM: suspend entry (deep)
[ 9946.681853] Filesystems sync: 0.492 seconds
[ 9946.682289] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 9946.685066] OOM killer disabled.
[ 9946.685068] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 9946.686391] printk: Suspending console(s) (use no_console_suspend to debug)
[ 9946.795204] sd 4:0:0:0: [sda] Synchronizing SCSI cache
[ 9946.795293] sd 4:0:0:0: [sda] Stopping disk
[ 9947.223211] nouveau 0000:01:00.0: Enabling HDA controller
[ 9947.939807] ACPI: EC: interrupt blocked
[ 9947.959631] ACPI: Preparing to enter system sleep state S3
[ 9947.984994] ACPI: EC: event blocked
[ 9947.984995] ACPI: EC: EC stopped
[ 9947.984996] PM: Saving platform NVS memory
[ 9947.985074] Disabling non-boot CPUs ...
[ 9947.986522] smpboot: CPU 1 is now offline
[ 9947.990916] smpboot: CPU 2 is now offline
[ 9947.994176] IRQ 31: no longer affine to CPU3
[ 9947.995218] smpboot: CPU 3 is now offline
[ 9947.998541] IRQ 34: no longer affine to CPU4
[ 9947.999559] smpboot: CPU 4 is now offline
[ 9948.001666] IRQ 18: no longer affine to CPU5
[ 9948.001669] IRQ 23: no longer affine to CPU5
[ 9948.002677] smpboot: CPU 5 is now offline
[ 9948.004725] IRQ 16: no longer affine to CPU6
[ 9948.004732] IRQ 35: no longer affine to CPU6
[ 9948.005738] smpboot: CPU 6 is now offline
[ 9948.007888] IRQ 30: no longer affine to CPU7
[ 9948.008914] smpboot: CPU 7 is now offline
[ 9948.014655] ACPI: Low-level resume complete
[ 9948.014677] ACPI: EC: EC started
[ 9948.014677] PM: Restoring platform NVS memory
[ 9948.015189] Enabling non-boot CPUs ...
[ 9948.015236] x86: Booting SMP configuration:
[ 9948.015237] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 9948.017802] CPU1 is up
[ 9948.017838] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 9948.020393] CPU2 is up
[ 9948.020427] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 9948.023018] CPU3 is up
[ 9948.023051] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 9948.023918] CPU4 is up
[ 9948.023947] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 9948.024668] CPU5 is up
[ 9948.024694] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 9948.025423] CPU6 is up
[ 9948.025448] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 9948.026542] CPU7 is up
[ 9948.034414] ACPI: Waking up from system sleep state S3
[ 9948.051394] ACPI: EC: interrupt unblocked
[ 9948.051908] nouveau 0000:01:00.0: Enabling HDA controller
[ 9948.072035] ACPI: EC: event unblocked
[ 9948.072190] ath: phy0: ASPM enabled: 0x42
[ 9948.082848] sd 4:0:0:0: [sda] Starting disk
[ 9948.383323] usb 3-10: reset high-speed USB device number 3 using xhci_hcd
[ 9948.406631] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9948.410485] ata3.00: configured for UDMA/133
[ 9948.628079] OOM killer enabled.
[ 9948.628081] Restarting tasks ...
[ 9948.630838] pci_bus 0000:02: Allocating resources
[ 9948.630862] pci_bus 0000:03: Allocating resources
[ 9948.630887] pci_bus 0000:04: Allocating resources
[ 9948.635036] done.
[ 9948.637480] PM: suspend exit
[ 9948.638577] pci_bus 0000:02: Allocating resources
[ 9948.638586] pci_bus 0000:03: Allocating resources
[ 9948.638599] pci_bus 0000:04: Allocating resources
[ 9948.678849] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9948.678851] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9948.880298] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9948.880301] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9949.084324] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9949.084328] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9949.288335] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9949.288338] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9949.492296] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9949.492300] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9949.696346] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9949.696351] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9949.900358] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9949.900362] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9950.104312] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9950.104316] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9950.308355] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 9950.308359] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 9950.923090] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9950.930405] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[ 9950.930427]
Initialized Local Variables for Method [GTFB]:
[ 9950.930429] Local0: 00000000706c6c53 <Obj> Integer 00000000000000A8
[ 9950.930441] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[ 9950.930443] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[ 9950.930456] Arg1: 0000000038d44cee <Obj> Integer 0000000000000000
[ 9950.930465] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 9950.930480] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 9950.930496] ata5.00: _GTF evaluation failed (AE 0x300a)
[ 9950.937998] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CMDX] at bit offset/length 168/56 exceeds size of target Buffer (168 bits) (20190816/dsopcode-198)
[ 9950.938020]
Initialized Local Variables for Method [GTFB]:
[ 9950.938022] Local0: 00000000eab42189 <Obj> Integer 00000000000000A8
[ 9950.938035] Initialized Arguments for Method [GTFB]: (2 arguments defined for method invocation)
[ 9950.938036] Arg0: 000000009ffd204a <Obj> Buffer(7) C1 00 00 00 00 00 B1
[ 9950.938049] Arg1: 0000000063f3c1a9 <Obj> Integer 0000000000000000
[ 9950.938059] ACPI Error: Aborting method \GTFB due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 9950.938073] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_AML_BUFFER_LIMIT) (20190816/psparse-529)
[ 9950.938090] ata5.00: _GTF evaluation failed (AE 0x300a)
[ 9950.938305] ata5.00: configured for UDMA/133
[ 9951.138272] Generic FE-GE Realtek PHY r8169-0-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-0-400:00, irq=IGNORE)
[ 9951.247830] r8169 0000:04:00.0 enp4s0: Link is Down
[ 9953.732304] audit: type=1400 audit(1657777010.712:47): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=12072 comm="cups-browsed" capability=23 capname="sys_nice"
[ 9954.169838] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control off
jacky@jacky:~$ Hors ligne
#23 Le 14/07/2022, à 10:30
- centaure222
Re : démarrage xubuntu tres long [résolu]
mais pour toi, ces 3 durees sont normales ??
et ces aplpli sont-elles utiles ??
1min 56.207s man-db.service
1min 46.328s apt-daily-upgrade.service
1min 42.644s logrotate.service
Hors ligne
#24 Le 14/07/2022, à 11:05
- nany
Re : démarrage xubuntu tres long [résolu]
centaure222 a écrit :
mais pour toi, ces 3 durees sont normales ??
…
1min 56.207s man-db.service
1min 46.328s apt-daily-upgrade.service
1min 42.644s logrotate.service
Dans la mesure où ces services arrivent après le graphical.target :
centaure222 a écrit :
graphical.target reached after 59.508s in userspace
je ne pense pas que ça agisse sur le temps de démarrage.
centaure222 a écrit :
et ces aplpli sont-elles utiles ??
A priori, oui.
Quel est ton disque ou quels sont tes disques :
sudo lshw -sanitize -c disk?
Hors ligne
#25 Le 14/07/2022, à 11:12
- centaure222
Re : démarrage xubuntu tres long [résolu]
jacky@jacky:~$ sudo lshw -sanitize -c disk
[sudo] Mot de passe de jacky :
steveDésolé, essayez de nouveau.
[sudo] Mot de passe de jacky :
*-cdrom
description: DVD-RAM writer
produit: DVD-RAM UJ8E2 S
fabricant: MATSHITA
identifiant matériel: 0.0.0
information bus: scsi@2:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/cdrw
nom logique: /dev/dvd
nom logique: /dev/dvdrw
nom logique: /dev/sr0
version: 1.00
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration : ansiversion=5 status=nodisc
*-disk
description: ATA Disk
produit: ST750LM022 HN-M7
identifiant matériel: 0.0.0
information bus: scsi@4:0.0.0
nom logique: /dev/sda
version: 0002
numéro de série: [REMOVED]
taille: 698GiB (750GB)
fonctionnalités: gpt-1.00 partitioned partitioned:gpt
configuration : ansiversion=5 guid=f2b906c5-199b-43af-8cc4-f7776782f1fd logicalsectorsize=512 sectorsize=4096
*-disk
description: SCSI Disk
produit: Multi-Card
fabricant: Generic-
identifiant matériel: 0.0.0
information bus: scsi@5:0.0.0
nom logique: /dev/sdb
version: 1.00
fonctionnalités: removable
configuration : logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sdb
jacky@jacky:~$ Hors ligne