#1 Le 31/10/2022, à 17:26
- valenthildette
[Résolu] RAID 5 cassé sur NAS OMV
Bonjour,
J'ai eu un souci hier, alors qu'il tourne depuis des années, mon RAID 5 (5 disques 2 To) a cessé de fonctionner brutalement, en plein milieu de la copie d'un fichier.
Comme ça m'arrive de temps en temps, j'ai redémarré la VM mais à la reconnexion plus de file system dans OMV.
le md0 avait changé de UUID (plus le même que celui attendu par OMV). Déjà ça c'est bizarre !
meme si je n'arrive pas à le remettre en route "comme avant" aavec les partages et tout, j'aimerais bien arriver à le monter en lecture seule pour récupérer un max de fichiers dedans (surtout les photos).
j'ai tenté de le reconstruire avec mdadm mais :
- parfois il me dit qu'il n'y a pas assez de disques pour reconstruire
- parfois il me crée un nouveau md127 avec juste 3 disques (inutilisable)
- parfois il me dit que les disques dont dans le raid, parfois non
je bidouille un peu mais je ne suis pas très bon quand même
Pouvez-vous svp m'aider à tenter de récupérer les données ?
Merci d'avance pour votre patience et votre compréhension
Dernière modification par valenthildette (Le 05/11/2022, à 10:28)
AMD Athlon 64X2, 8 Gio RAM, SSD 60 Gio + DD 500 Gio, LM 16-64bits, GeForce 7800 GTX
...et plein d'ordinosaures autour...;)
Hors ligne
#2 Le 31/10/2022, à 18:42
- geole
Re : [Résolu] RAID 5 cassé sur NAS OMV
Bonjour.
Je ne connais pas bien ce que tu peux faire via cet OMV et quelles applications sont à ta disposition.
Je vois que tu peux utiliser MDADM
Ma question serait de savoir si tu peux installer/utiliser l'application smartmontools et poster un rapport smartctl pour chacun de tes cinq disques.
Cela permettra de connaitre leur état et probablement de comprendre pourquoi cela ne peut pas repartir.
Quelquefois, il faut les déconnecter du nas pour les brancher directement dans ubuntu.
Si cela doit être le cas, commence par un seul.
Il faut savoir qu'un disque qui a quelques secteurs illisibles est éjecté au redémarrage.
J'ai noté que tu sais qu'avec deux disques éjectés, le nas est inutilisable.
Dernière modification par geole (Le 31/10/2022, à 18:51)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#3 Le 01/11/2022, à 09:22
- valenthildette
Re : [Résolu] RAID 5 cassé sur NAS OMV
Bonjour Geole, merci de t'intéresser au pb
OMV c'est OpenMediaVault une distro basée sur Debian pour les NAS diy.
je n'ai pas pu lancer les smartctl depuis la VM, je les ai donc lancés depuis l'hôte.
D'ailleurs, ça me donne une idée, je peux peut-être essayer d'assembler le RAID de puis l'hôte, qu'en penses-tu ?
sur l'hôte sdb correspond à vda sur la VM, ..., sdf à vde
voici les rapports :
root@pve:~# smartctl --all /dev/sdb
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.60-2-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K2000
Device Model: Hitachi HDS722020ALA330
Serial Number: JK1171YAGRM7ZS
LU WWN Device Id: 5 000cca 221ca4874
Firmware Version: JKAOA20N
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue Nov 1 08:05:42 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (22477) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 375) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 131 131 054 Pre-fail Offline - 108
3 Spin_Up_Time 0x0007 204 204 024 Pre-fail Always - 478 (Average 231)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 349
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 112 112 020 Pre-fail Offline - 39
9 Power_On_Hours 0x0012 091 091 000 Old_age Always - 64409
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 334
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1724
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1724
194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 38 (Min/Max 19/66)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@pve:~#
root@pve:~# smartctl --all /dev/sdc
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.60-2-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K2000
Device Model: Hitachi HDS722020ALA330
Serial Number: JK1171YAGRN1KS
LU WWN Device Id: 5 000cca 221ca4b6e
Firmware Version: JKAOA20N
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue Nov 1 08:07:09 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (21889) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 365) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 1
2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 98
3 Spin_Up_Time 0x0007 167 167 024 Pre-fail Always - 518 (Average 350)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 336
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 110 110 020 Pre-fail Offline - 40
9 Power_On_Hours 0x0012 091 091 000 Old_age Always - 64428
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 324
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1749
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1749
194 Temperature_Celsius 0x0002 133 133 000 Old_age Always - 45 (Min/Max 19/74)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@pve:~#
root@pve:~# smartctl --all /dev/sdd
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.60-2-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K2000
Device Model: Hitachi HDS722020ALA330
Serial Number: JK1171YAGRJ0TS
LU WWN Device Id: 5 000cca 221ca3c52
Firmware Version: JKAOA20N
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue Nov 1 08:08:06 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (21595) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 360) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 098 098 016 Pre-fail Always - 5
2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 97
3 Spin_Up_Time 0x0007 163 163 024 Pre-fail Always - 519 (Average 369)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 201
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 68
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 112 112 020 Pre-fail Offline - 39
9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 22220
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 189
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 749
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 749
194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 19/66)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 68
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 3
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 15313 hours (638 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 16 ea 24 a2 00 Error: UNC at LBA = 0x00a224ea = 10626282
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 40 e8 48 a5 a6 40 08 16d+22:27:01.879 READ FPDMA QUEUED
60 40 a8 68 95 a6 40 08 16d+22:27:01.877 READ FPDMA QUEUED
60 b0 10 e8 7a a6 40 08 16d+22:27:01.822 READ FPDMA QUEUED
60 40 b0 a8 75 a6 40 08 16d+22:27:01.822 READ FPDMA QUEUED
60 40 40 b8 6d a6 40 08 16d+22:27:01.767 READ FPDMA QUEUED
Error 1 occurred at disk power-on lifetime: 15313 hours (638 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 66 ea 24 a2 00 Error: UNC at LBA = 0x00a224ea = 10626282
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 40 48 a8 96 a2 40 08 16d+22:26:34.278 READ FPDMA QUEUED
60 10 40 98 93 a2 40 08 16d+22:26:34.167 READ FPDMA QUEUED
60 c0 80 d8 90 a2 40 08 16d+22:26:34.166 READ FPDMA QUEUED
60 40 78 98 8b a2 40 08 16d+22:26:34.102 READ FPDMA QUEUED
60 40 70 a8 83 a2 40 08 16d+22:26:33.991 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 14928 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@pve:~#
root@pve:~# smartctl --all /dev/sde
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.60-2-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K2000
Device Model: Hitachi HDS722020ALA330
Serial Number: JK1171YAGRMSSS
LU WWN Device Id: 5 000cca 221ca4a5d
Firmware Version: JKAOA20N
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue Nov 1 08:09:23 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (22477) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 375) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline - 106
3 Spin_Up_Time 0x0007 172 172 024 Pre-fail Always - 416 (Average 426)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 305
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 104
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 110 110 020 Pre-fail Offline - 40
9 Power_On_Hours 0x0012 089 089 000 Old_age Always - 81910
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 293
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1472
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1472
194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 17/63)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 104
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@pve:~#
root@pve:~# smartctl --all /dev/sdf
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.60-2-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K2000
Device Model: Hitachi HDS722020ALA330
Serial Number: JK1171YAGRM94S
LU WWN Device Id: 5 000cca 221ca4898
Firmware Version: JKAOA20N
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue Nov 1 08:10:00 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (21448) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 358) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 099 099 016 Pre-fail Always - 65537
2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 99
3 Spin_Up_Time 0x0007 196 196 024 Pre-fail Always - 498 (Average 239)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 334
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 1
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 110 110 020 Pre-fail Offline - 40
9 Power_On_Hours 0x0012 092 092 000 Old_age Always - 61738
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 310
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1750
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1750
194 Temperature_Celsius 0x0002 133 133 000 Old_age Always - 45 (Min/Max 20/75)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 6 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 6 occurred at disk power-on lifetime: 11446 hours (476 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0f 21 08 64 00 Error: UNC at LBA = 0x00640821 = 6555681
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 58 30 06 64 40 08 27d+16:43:08.683 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 08 27d+16:43:08.681 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 08 27d+16:43:08.680 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 08 27d+16:43:08.672 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 27d+16:43:08.671 SET FEATURES [Set transfer mode]
Error 5 occurred at disk power-on lifetime: 11446 hours (476 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0f 21 08 64 00 Error: UNC at LBA = 0x00640821 = 6555681
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 48 30 06 64 40 08 27d+16:42:51.694 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 08 27d+16:42:51.693 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 08 27d+16:42:51.692 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 08 27d+16:42:51.684 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 27d+16:42:51.683 SET FEATURES [Set transfer mode]
Error 4 occurred at disk power-on lifetime: 11446 hours (476 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0f 21 08 64 00 Error: UNC at LBA = 0x00640821 = 6555681
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 40 30 06 64 40 08 27d+16:42:34.707 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 08 27d+16:42:34.706 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 08 27d+16:42:34.705 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 08 27d+16:42:34.696 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 27d+16:42:34.695 SET FEATURES [Set transfer mode]
Error 3 occurred at disk power-on lifetime: 11446 hours (476 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0f 21 08 64 00 Error: UNC at LBA = 0x00640821 = 6555681
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 38 30 06 64 40 08 27d+16:42:17.719 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 08 27d+16:42:17.718 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 08 27d+16:42:17.717 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 08 27d+16:42:17.708 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 27d+16:42:17.707 SET FEATURES [Set transfer mode]
Error 2 occurred at disk power-on lifetime: 11446 hours (476 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0f 21 08 64 00 Error: UNC at LBA = 0x00640821 = 6555681
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 30 30 06 64 40 08 27d+16:42:00.731 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 08 27d+16:42:00.730 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 08 27d+16:42:00.729 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 08 27d+16:42:00.720 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 27d+16:42:00.720 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 28451 -
# 2 Short offline Completed without error 00% 28427 -
# 3 Short offline Completed without error 00% 28412 -
# 4 Short offline Completed without error 00% 28331 -
# 5 Short offline Completed without error 00% 28307 -
# 6 Short offline Completed without error 00% 28283 -
# 7 Short offline Completed without error 00% 28259 -
# 8 Short offline Completed without error 00% 28235 -
# 9 Short offline Completed without error 00% 28211 -
#10 Short offline Completed without error 00% 28187 -
#11 Short offline Completed without error 00% 28163 -
#12 Short offline Completed without error 00% 28139 -
#13 Short offline Completed without error 00% 28115 -
#14 Short offline Completed without error 00% 28091 -
#15 Short offline Completed without error 00% 28067 -
#16 Short offline Completed without error 00% 28043 -
#17 Short offline Completed without error 00% 28019 -
#18 Short offline Completed without error 00% 27995 -
#19 Short offline Completed without error 00% 27971 -
#20 Short offline Completed without error 00% 27947 -
#21 Short offline Completed without error 00% 27923 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@pve:~#
désolé c'est un peu long
AMD Athlon 64X2, 8 Gio RAM, SSD 60 Gio + DD 500 Gio, LM 16-64bits, GeForce 7800 GTX
...et plein d'ordinosaures autour...;)
Hors ligne
#4 Le 01/11/2022, à 10:35
- geole
Re : [Résolu] RAID 5 cassé sur NAS OMV
Bonjour.
Pour ce premier disque, il de très bonne qualité.
Le nombre de lignes retournées est normal.
Tu peux donner les autres ...
Pour le réassemblage depuis ubuntu, c'est possible
Mais en premier
Il faut finir les rapports smartclt
En second, il faudra lister l'état du raids pour connaitre la version utilisée car si ce n'est pas la dernière, il faudra le préciser au moment du réassemblage.
Si tu connais bien les commandes, c'est parfait.
Sinon, j'ouvrirais mon aide-mémoire.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#5 Le 01/11/2022, à 10:38
- geole
Re : [Résolu] RAID 5 cassé sur NAS OMV
Bonjour.
Pour ce premier disque, il de très bonne qualité.
Le nombre de lignes retournées est normal.
Tu peux donner les autres ...
Pour le réassemblage depuis ubuntu, c'est possible
Mais en premier
Il faut finir les rapports smartclt
En second, il faudra lister l'état du raids pour connaitre la version utilisée car si ce n'est pas la dernière, il faudra le préciser au moment du réassemblage.
Si tu connais bien les commandes, c'est parfait.
Sinon, j'ouvrirais mon aide-mémoire.
Ajout.
Je viens de voir que tu as mis tous les retours dans un même paquet.
Je retourne regarder les quatre autres disques.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#6 Le 01/11/2022, à 10:45
- geole
Re : [Résolu] RAID 5 cassé sur NAS OMV
Tu peux te préparer à acheter deux disques et à lire la documentation ddrescue
https://doc.ubuntu-fr.org/ddrescue
pour les dupliquer.
ce sont sdd et sde.
Je vais mettre les extraits.
smartctl --all /dev/sdd
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K2000
Device Model: Hitachi HDS722020ALA330
Serial Number: JK1171YAGRJ0TS
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 098 098 016 Pre-fail Always - 5
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 68
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 22220
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 68
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 3
root@pve:~# smartctl --all /dev/sde
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K2000
Device Model: Hitachi HDS722020ALA330
Serial Number: JK1171YAGRMSSS
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 104
9 Power_On_Hours 0x0012 089 089 000 Old_age Always - 81910
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 104
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 2
Nota. Ne pas se fier à la très faible quantité de secteurs illisibles ( 3 et 2) , Cela peut augmenter extrêmement rapidement lorsqu on duplique la totalité du disque.
Dernière modification par geole (Le 01/11/2022, à 11:12)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#7 Le 01/11/2022, à 11:47
- valenthildette
Re : [Résolu] RAID 5 cassé sur NAS OMV
Merci geole
est-ce que je peux utiliser une autre machine pour le ddrescue ?
P.ex. je démonte sdd, je le mets avec un disque neuf dans une autre machine, je "piste" les nouveaux noms des disques (/dev/sd<x> /dev/sd<y>) et je lance
ddrescue /dev/sd<x> /dev/sd<y> /home/documents/log
questions :
- comment je m'assure de la position des disques pour ne pas bêtement copier le neuf sur l'ancien ?
- est-ce que je peux faire "disque à disque" (la doc parle de fichier.img) ?
- quelles options utiliser (-n me parait indispensable) ?
dans les exemples ils utilisent des options -d -R -f -c1 que je n'ai pas vues ailleurs... peut-être dans le man ?
AMD Athlon 64X2, 8 Gio RAM, SSD 60 Gio + DD 500 Gio, LM 16-64bits, GeForce 7800 GTX
...et plein d'ordinosaures autour...;)
Hors ligne
#8 Le 01/11/2022, à 12:54
- geole
Re : [Résolu] RAID 5 cassé sur NAS OMV
Avec plein de disques que tu montes, les noms peuvent changer à chaque montage, dans ce contexte, il fait utiliser l'identification unique
ls -als /dev/disk/by-id
devrait donner les valeurs
et je 'ai déjà mis les deux id des deux disques défaillants: JK1171YAGRJ0TS et JK1171YAGRMSSS
Je propose une copie disque à disque si tu remplaces par des disques de même taille.
Tu peux peux faire sur les machines que tu veux. Tu peux même lancer en parallèle.
donc le début
ddrescue -n /dev/disk/by-id/*_JK1171YAGRJ0TS /dev/disk/by-id/*<id> /home/documents/log-SDD
ddrescue -n /dev/disk/by-id/*_JK1171YAGRMSSS /dev/disk/by-id/*<id> /home/documents/log-SDE
Si tu remplaces par des disques de taille plus grande et que les disques ont des partitions, il est préférable de dupliquer par partition après avoir avoir créé les nouvelles partitions.
Si tu le peux, prends des disques Rotation Rate: 7200 rpm
car sinon, ce sont les plus lents qui gagnent.
Hors de question de copier temporairement sur des fichiers de taille à 2TO
Le MAN explique les options.
Les exemples décomposent en deux:
D'abord la copie de ce qui est facile à lire.
Puis la copie de ce qui est difficile en montrant quelques valeurs de paramètres.
Si on ne met rien, la commande prend des paramètres par défaut dont la taille du bloc = 512. Ce qui est ton contexte.
Dernière modification par geole (Le 01/11/2022, à 13:04)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#9 Le 01/11/2022, à 15:17
- valenthildette
Re : [Résolu] RAID 5 cassé sur NAS OMV
encore merci pour ta patience vraiment appréciée
reste à se procurer les disques et lancer le clonage.
Je reviens dans quelques jours avec le résultat.
Tu voudras que je publie les logs avant de continuer ?
Au passage, je viens d'apprendre encore un truc grâce à toi, le UUID contient le S/N du disque, je l'ignorais grave
AMD Athlon 64X2, 8 Gio RAM, SSD 60 Gio + DD 500 Gio, LM 16-64bits, GeForce 7800 GTX
...et plein d'ordinosaures autour...;)
Hors ligne
#10 Le 01/11/2022, à 15:42
- geole
Re : [Résolu] RAID 5 cassé sur NAS OMV
Reviens au moment de la duplication
Car c'est toujours plein d'imprévus.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#11 Le 01/11/2022, à 16:32
- valenthildette
Re : [Résolu] RAID 5 cassé sur NAS OMV
c'est en cours pour le premier disque.
j'ai dû utiliser l'option --force pour qu'il accepte de copier sur le dd entier.
encore +4H de patience, pour le moment...
on peut pas poster de capture d'écran ?
AMD Athlon 64X2, 8 Gio RAM, SSD 60 Gio + DD 500 Gio, LM 16-64bits, GeForce 7800 GTX
...et plein d'ordinosaures autour...;)
Hors ligne
#12 Le 01/11/2022, à 17:06
- geole
Re : [Résolu] RAID 5 cassé sur NAS OMV
Pour le suivi, il faut que tu ouvres un autre terminal et que tu frappes
ddrescuelog -tvv /home/documents/log-SDD
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#13 Le 01/11/2022, à 18:37
- valenthildette
Re : [Résolu] RAID 5 cassé sur NAS OMV
le terminal principal est plus verbeux que le log
AMD Athlon 64X2, 8 Gio RAM, SSD 60 Gio + DD 500 Gio, LM 16-64bits, GeForce 7800 GTX
...et plein d'ordinosaures autour...;)
Hors ligne
#14 Le 01/11/2022, à 18:49
- geole
Re : [Résolu] RAID 5 cassé sur NAS OMV
Dans l'instance qui tourne, c'est réactualisé en permanence, il n'est pas possible de faire une capture.
La commande en question prend un instantané que tu peux transmettre par copier/coller
a@p:~$ ddrescuelog -tvv trace
trace
current pos: 0 B, current status: finished
mapfile extent: 15929 B, in 1 area(s)
non-tried: 0 B, in 0 area(s) ( 0%)
rescued: 15929 B, in 1 area(s) (100%)
non-trimmed: 0 B, in 0 area(s) ( 0%)
non-scraped: 0 B, in 0 area(s) ( 0%)
bad-sector: 0 B, in 0 area(s) ( 0%)
a@p:~$
Dernière modification par geole (Le 01/11/2022, à 22:23)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#15 Le 01/11/2022, à 21:54
- valenthildette
Re : [Résolu] RAID 5 cassé sur NAS OMV
premier disque fini avec succès
/home/eric/Documents/log-SSS
current pos: 2000 GB, current status: finished
mapfile extent: 2000 GB, in 1 area(s)
non-tried: 0 B, in 0 area(s) ( 0%)
rescued: 2000 GB, in 1 area(s) (100%)
non-trimmed: 0 B, in 0 area(s) ( 0%)
non-scraped: 0 B, in 0 area(s) ( 0%)
bad-sector: 0 B, in 0 area(s) ( 0%)
Demain je vais au taf, j'essaye de lancer le 2° avant de partir...
AMD Athlon 64X2, 8 Gio RAM, SSD 60 Gio + DD 500 Gio, LM 16-64bits, GeForce 7800 GTX
...et plein d'ordinosaures autour...;)
Hors ligne
#16 Le 01/11/2022, à 21:56
- valenthildette
Re : [Résolu] RAID 5 cassé sur NAS OMV
et l'écran principal :
root@eric-MS-7597:/home/eric# ddrescue -n --force /dev/disk/by-id/*GRMSSS /dev/disk/by-id/*51P4 /home/eric/Documents/log-SSS
GNU ddrescue 1.23
Press Ctrl-C to interrupt
ipos: 289689 MB, non-trimmed: 0 B, current rate: 123 MB/s
ipos: 2000 GB, non-trimmed: 0 B, current rate: 38625 kB/s
opos: 2000 GB, non-scraped: 0 B, average rate: 96066 kB/s
non-tried: 0 B, bad-sector: 0 B, error rate: 0 B/s
rescued: 2000 GB, bad areas: 0, run time: 5h 47m 2s
pct rescued: 100.00%, read errors: 0, remaining time: n/a
time since last successful read: n/a
Finished
AMD Athlon 64X2, 8 Gio RAM, SSD 60 Gio + DD 500 Gio, LM 16-64bits, GeForce 7800 GTX
...et plein d'ordinosaures autour...;)
Hors ligne
#17 Le 01/11/2022, à 22:31
- geole
Re : [Résolu] RAID 5 cassé sur NAS OMV
Pour une fois, ce fut ultra-rapide.
Peux-tu refaire un rapport smartctl du disque émetteur.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#18 Le 02/11/2022, à 08:24
- valenthildette
Re : [Résolu] RAID 5 cassé sur NAS OMV
hello,
Arf! j'ai vu ton message trop tard, j'ai déjà mis les 2 autres dans le four
La suite ce soir... ou demain matin
AMD Athlon 64X2, 8 Gio RAM, SSD 60 Gio + DD 500 Gio, LM 16-64bits, GeForce 7800 GTX
...et plein d'ordinosaures autour...;)
Hors ligne
#19 Le 02/11/2022, à 21:57
- valenthildette
Re : [Résolu] RAID 5 cassé sur NAS OMV
voici le rapport de la 2° copie :
root@eric-MS-7597:/home/eric# ddrescue -n --force /dev/disk/by-id/*0TS /dev/disk/by-id/*331 /home/eric/Documents/log-0TS
GNU ddrescue 1.23
Press Ctrl-C to interrupt
ipos: 915934 MB, non-trimmed: 0 B, current rate: 17749 B/s
opos: 915934 MB, non-scraped: 3072 B, average rate: 96381 kB/s
non-tried: 0 B, bad-sector: 1024 B, error rate: 170 B/s
rescued: 2000 GB, bad areas: 2, run time: 5h 45m 55s
pct rescued: 99.99%, read errors: 3, remaining time: 1s
time since last successful read: 0s
Finished
et aussi le smartctl du disque source :
root@eric-MS-7597:/home/eric# smartctl -A /dev/disk/by-id/*0TS
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-41-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 1
2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 98
3 Spin_Up_Time 0x0007 137 137 024 Pre-fail Always - 533 (Average 519)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 205
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 68
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 114 114 020 Pre-fail Offline - 38
9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 22256
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 192
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 753
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 753
194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 19/66)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 68
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 4
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
et celui du disque de destination :
root@eric-MS-7597:/home/eric# smartctl -A /dev/disk/by-id/*331
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-41-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 199 194 051 Pre-fail Always - 133
3 Spin_Up_Time 0x0027 174 169 021 Pre-fail Always - 6266
4 Start_Stop_Count 0x0032 075 075 000 Old_age Always - 25382
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 069 069 000 Old_age Always - 22834
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 16
16 Total_LBAs_Read 0x0022 002 198 000 Old_age Always - 117410437019
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 8
193 Load_Cycle_Count 0x0032 192 192 000 Old_age Always - 25373
194 Temperature_Celsius 0x0022 111 106 000 Old_age Always - 39
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 30
est-ce que tu veux toujours le smartctl du 1er disque ?
AMD Athlon 64X2, 8 Gio RAM, SSD 60 Gio + DD 500 Gio, LM 16-64bits, GeForce 7800 GTX
...et plein d'ordinosaures autour...;)
Hors ligne
#20 Le 02/11/2022, à 23:21
- geole
Re : [Résolu] RAID 5 cassé sur NAS OMV
Bonsoir.
C'était juste par curiosité afin de voir comment il avait supporté afin de voir ce qu'on pouvait en faire
La premiere duplication montrait que tout avait été récupéré.
Ce qui ne semble pas le cas de la seconde duplication
bad area 2 avec current pending secteurs 4
Cela vaudrait le coup de relancer sans le paramêtre -n et avec le paramètre -r 99
Dernière modification par geole (Le 02/11/2022, à 23:33)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#21 Le 03/11/2022, à 08:09
- valenthildette
Re : [Résolu] RAID 5 cassé sur NAS OMV
Hello,
effectivement, ça valait le coup !
root@eric-MS-7597:/home/eric# ddrescue -r 99 --force /dev/disk/by-id/*0TS /dev/disk/by-id/*331 /home/eric/Documents/log-0TS
GNU ddrescue 1.23
Press Ctrl-C to interrupt
Initial status (read from mapfile)
rescued: 2000 GB, tried: 4096 B, bad-sector: 1024 B, bad areas: 2
Current status
ipos: 915934 MB, non-trimmed: 0 B, current rate: 3584 B/s
opos: 915934 MB, non-scraped: 0 B, average rate: 7 B/s
non-tried: 0 B, bad-sector: 0 B, error rate: 0 B/s
rescued: 2000 GB, bad areas: 0, run time: 9m 12s
pct rescued: 100.00%, read errors: 195, remaining time: n/a
time since last successful read: n/a
Finished
et le log :
root@eric-MS-7597:/home/eric# ddrescuelog -tvv /home/eric/Documents/log-0TS
/home/eric/Documents/log-0TS
current pos: 915934 MB, current status: finished
mapfile extent: 2000 GB, in 1 area(s)
non-tried: 0 B, in 0 area(s) ( 0%)
rescued: 2000 GB, in 1 area(s) (100%)
non-trimmed: 0 B, in 0 area(s) ( 0%)
non-scraped: 0 B, in 0 area(s) ( 0%)
bad-sector: 0 B, in 0 area(s) ( 0%)
quelle est la prochaine étape STP?
AMD Athlon 64X2, 8 Gio RAM, SSD 60 Gio + DD 500 Gio, LM 16-64bits, GeForce 7800 GTX
...et plein d'ordinosaures autour...;)
Hors ligne
#22 Le 03/11/2022, à 14:44
- geole
Re : [Résolu] RAID 5 cassé sur NAS OMV
Bonjour
9 minutes pour copier 2 secteurs, il a du s'y reprendre pas mal de fois.
Je n'ai pas compris la panne de ton NAS.
A mon avis cela vaut le coup de retenter de remettre en route le NAS
Je ne connais du tout son pilotage.
Sinon, avec l'application MDADM, on peut tenter quelque chose en commençant par faire un point
sudo parted -l
sudo lsblk -o SIZE,NAME,FSTYPE,LABEL,MOUNTPOINT
et cette commande à adapter.
sudo mdadm --examine /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1 | egrep -i 'Update Time|Device Role'
Dernière modification par geole (Le 03/11/2022, à 15:06)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#23 Le 04/11/2022, à 11:24
- valenthildette
Re : [Résolu] RAID 5 cassé sur NAS OMV
Bonjour geole,
désolé pour le délai de réponse.
voici ce que donne :
parted -l
root@vm-omv:~# parted -l
Model: QEMU QEMU HARDDISK (scsi)
Disk /dev/sda: 34,4GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 33,3GB 33,3GB primary ext4 boot
2 33,3GB 34,4GB 1022MB extended
5 33,3GB 34,4GB 1022MB logical linux-swap(v1)
Model: Virtio Block Device (virtblk)
Disk /dev/vdd: 2000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 2000GB 2000GB primary ntfs raid
Error: /dev/vdb: unrecognised disk label
Model: Virtio Block Device (virtblk)
Disk /dev/vdb: 2000GB
Sector size (logical/physical): 512B/512B
Partition Table: unknown
Disk Flags:
Warning: Unable to open /dev/sr0 read-write (Système de fichiers accessible en
lecture seulement). /dev/sr0 has been opened read-only.
Model: QEMU QEMU DVD-ROM (scsi)
Disk /dev/sr0: 775MB
Sector size (logical/physical): 2048B/2048B
Partition Table: mac
Disk Flags:
Number Start End Size File system Name Flags
1 2048B 6143B 4096B Apple
2 3652kB 6371kB 2720kB EFI
Error: /dev/vde: unrecognised disk label
Model: Virtio Block Device (virtblk)
Disk /dev/vde: 2000GB
Sector size (logical/physical): 512B/512B
Partition Table: unknown
Disk Flags:
Error: /dev/vdc: unrecognised disk label
Model: Virtio Block Device (virtblk)
Disk /dev/vdc: 2000GB
Sector size (logical/physical): 512B/512B
Partition Table: unknown
Disk Flags:
Error: /dev/vda: unrecognised disk label
Model: Virtio Block Device (virtblk)
Disk /dev/vda: 2000GB
Sector size (logical/physical): 512B/512B
Partition Table: unknown
Disk Flags:
lsblk -o SIZE,NAME,FSTYPE,LABEL,MOUNTPOINT
root@vm-omv:~# lsblk -o SIZE,NAME,FSTYPE,LABEL,MOUNTPOINT
SIZE NAME FSTYPE LABEL MOUNTPOINT
32G sda
31G ├─sda1 ext4 /
1K ├─sda2
975M └─sda5 swap [SWAP]
739M sr0 iso9660 openmediavault 20210709-09:01
1,8T vda linux_raid_member nas:md0
1,8T vdb linux_raid_member nas:md0
1,8T vdc linux_raid_member nas:md0
1,8T vdd linux_raid_member nas:md0
1,8T └─vdd1
1,8T vde linux_raid_member nas:md0
root@vm-omv:~#
et enfin mdadm --examine /dev/vda /dev/vdb /dev/vdc /dev/vdd /dev/vde | egrep -i 'Update Time|Device Role'
root@vm-omv:~# mdadm --examine /dev/vda /dev/vdb /dev/vdc /dev/vdd /dev/vde | egrep -i 'Update Time|Device Role'
mdadm: Unknown keyword INACTIVE-ARRAY
Update Time : Sun Oct 30 14:14:45 2022
Device Role : Active device 0
Update Time : Sun Oct 30 14:14:45 2022
Device Role : Active device 1
Update Time : Sun Oct 30 14:14:45 2022
Device Role : Active device 4
Update Time : Fri Jan 14 02:23:48 2022
Device Role : Active device 2
Update Time : Sun Oct 30 14:14:45 2022
Device Role : Active device 3
root@vm-omv:~#
àa n'a pas l'air bien brillant
AMD Athlon 64X2, 8 Gio RAM, SSD 60 Gio + DD 500 Gio, LM 16-64bits, GeForce 7800 GTX
...et plein d'ordinosaures autour...;)
Hors ligne
#24 Le 04/11/2022, à 17:07
- valenthildette
Re : [Résolu] RAID 5 cassé sur NAS OMV
bon, finalement je me suis lancé.
en faisant
root@vm-omv:~# mdadm --assemble /dev/md0 /dev/vda /dev/vdb /dev/vdc /dev/vdd /dev/vde
mdadm: /dev/md0 assembled from 4 drives - not enough to start the array while not clean - consider --force.
il ne recréait pas l'array il manquait un disque, et il me créait un md127 avec 3 disques en spare. (a, b, e)
j'ai fait
root@vm-omv:~# mdadm --examine /dev/vda
/dev/vda:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : ed532c11:43752f86:8d7cca6a:24be687a
Name : nas:md0
Creation Time : Mon Aug 22 20:51:54 2016
Raid Level : raid5
Raid Devices : 5
Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB)
Array Size : 7813531648 (7451.56 GiB 8001.06 GB)
Used Dev Size : 3906765824 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=1200 sectors
State : active
Device UUID : 05b37241:84158fd1:522f7008:4361e7a6
Update Time : Sun Oct 30 14:14:45 2022
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : afa27232 - correct
Events : 142388
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 0
Array State : AA.AA ('A' == active, '.' == missing, 'R' == replacing)
root@vm-omv:~#
root@vm-omv:~#
root@vm-omv:~# mdadm --examine /dev/vdb
/dev/vdb:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : ed532c11:43752f86:8d7cca6a:24be687a
Name : nas:md0
Creation Time : Mon Aug 22 20:51:54 2016
Raid Level : raid5
Raid Devices : 5
Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB)
Array Size : 7813531648 (7451.56 GiB 8001.06 GB)
Used Dev Size : 3906765824 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262064 sectors, after=1200 sectors
State : active
Device UUID : a64ae8a2:cc186976:d34f9171:1ea37232
Update Time : Sun Oct 30 14:14:45 2022
Checksum : aa966f28 - correct
Events : 142388
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 1
Array State : AA.AA ('A' == active, '.' == missing, 'R' == replacing)
root@vm-omv:~#
root@vm-omv:~#
root@vm-omv:~# mdadm --examine /dev/vdc
/dev/vdc:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : ed532c11:43752f86:8d7cca6a:24be687a
Name : nas:md0
Creation Time : Mon Aug 22 20:51:54 2016
Raid Level : raid5
Raid Devices : 5
Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB)
Array Size : 7813531648 (7451.56 GiB 8001.06 GB)
Used Dev Size : 3906765824 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=261864 sectors, after=1200 sectors
State : clean
Device UUID : 1ff2747f:c6f27bef:bf24c6c4:8577b988
Update Time : Fri Jan 14 02:23:48 2022
Bad Block Log : 512 entries available at offset 264 sectors
Checksum : a83a27fb - correct
Events : 89585
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 2
Array State : AAAAA ('A' == active, '.' == missing, 'R' == replacing)
root@vm-omv:~#
root@vm-omv:~#
root@vm-omv:~#
root@vm-omv:~# mdadm --examine /dev/vdd
/dev/vdd:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : ed532c11:43752f86:8d7cca6a:24be687a
Name : nas:md0
Creation Time : Mon Aug 22 20:51:54 2016
Raid Level : raid5
Raid Devices : 5
Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB)
Array Size : 7813531648 (7451.56 GiB 8001.06 GB)
Used Dev Size : 3906765824 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262064 sectors, after=1200 sectors
State : active
Device UUID : d077e55d:e388e41a:8cc43f75:6496aa19
Update Time : Sun Oct 30 14:14:45 2022
Checksum : f4f5746b - correct
Events : 142388
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 3
Array State : AA.AA ('A' == active, '.' == missing, 'R' == replacing)
root@vm-omv:~#
root@vm-omv:~#
root@vm-omv:~# mdadm --examine /dev/vde
/dev/vde:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : ed532c11:43752f86:8d7cca6a:24be687a
Name : nas:md0
Creation Time : Mon Aug 22 20:51:54 2016
Raid Level : raid5
Raid Devices : 5
Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB)
Array Size : 7813531648 (7451.56 GiB 8001.06 GB)
Used Dev Size : 3906765824 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=1200 sectors
State : active
Device UUID : 49e44b12:7059c9cb:7837f5f8:70ef0dc0
Update Time : Sun Oct 30 14:14:45 2022
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 84617db5 - correct
Events : 142388
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 4
Array State : AA.AA ('A' == active, '.' == missing, 'R' == replacing)
root@vm-omv:~#
les disques sont tous "active" sauf /dev/vdc qui est "clean"
j'ai lancé
root@vm-omv:~# mdadm --assemble --force /dev/md0 /dev/vda /dev/vdb /dev/vdc /dev/vdd /dev/vde
mdadm: Marking array /dev/md0 as 'clean'
mdadm: /dev/md0 has been started with 4 drives (out of 5).
root@vm-omv:~#
root@vm-omv:~# mdadm --manage /dev/md0 --add /dev/vdc
mdadm: added /dev/vdc
et là, il est en train de reconstruire le raid :
root@vm-omv:~# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 vdc[6] vda[8] vde[7] vdd[5] vdb[1]
7813531648 blocks super 1.2 level 5, 512k chunk, algorithm 2 [5/4] [UU_UU]
[>....................] recovery = 1.9% (38332080/1953382912) finish=429.2min speed=74358K/sec
unused devices: <none>
root@vm-omv:~#
Y en a pour la nuit, on verra le résultat demain
AMD Athlon 64X2, 8 Gio RAM, SSD 60 Gio + DD 500 Gio, LM 16-64bits, GeForce 7800 GTX
...et plein d'ordinosaures autour...;)
Hors ligne
#25 Le 04/11/2022, à 18:10
- geole
Re : [Résolu] RAID 5 cassé sur NAS OMV
Bonjour
Je pense que cela va marcher.
Je pense que tu as vu ce résultat
Update Time : Fri Jan 14 02:23:48 2022
Depuis le 14 janvier, tu avais un disque (VDD de la première commande et VDC de la seconde) qui était éliminé du RAIDS.
Habituellement, on doit être prévenu de cet incident. Tu avais plus de neuf mois pour le remplacer.
A mon avis, lorsque le nas a vu qu'un second disque était abîmé, il a stoppé immédiatement. D'où le redémarrage assez facile.
et pour un suivi plus pratique
watch -n 60 cat /proc/mdstat
Dernière modification par geole (Le 04/11/2022, à 18:29)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne