Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 18/12/2022, à 18:44

kalavera75

Re : [RESOLU] Disque dur externe impossible à monter

Pour finir :-)

0	/root/.sudo_as_admin_successful
1	/root/.bashrc
1	/root/.cache
1	/root/.config
1	/root/.local
1	/root/.profile
1	/root/snap
3	/root/.launchpadlib
4	/root

en image :-)

https://zupimages.net/up/22/50/kffd.png

reste un fichier dans un répertoire je pense que je pourrais le supprimer en suivant ta ligne de commande

https://zupimages.net/up/22/50/cfu9.png

donc tout a disparu

https://zupimages.net/up/22/50/wrke.png

Vraiment plein de choses comprises et apprises,
Je ferai mes copies plus tard, je vais faire ton test de disque car j'ai toujours des planatges mais souvent du à des fichiers non reconnus et cela stop la copie

Mais un grand merci, si tu es sur Paris, je paye le café

Dernière modification par cqfd93 (Le 18/12/2022, à 19:16)

Hors ligne

#27 Le 18/12/2022, à 18:48

kalavera75

Re : [RESOLU] Disque dur externe impossible à monter

Le disque Toshiba

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MQ04UBF... (USB 3.0)
Device Model:     TOSHIBA MQ04UBF100
Serial Number:    X1BBT04KT
LU WWN Device Id: 0 000000 000000000
Firmware Version: JU0B0U
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Zoned Device:     Device managed zones
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.3, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun Dec 18 18:46:55 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 174) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       2655
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       61
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       10
 10 Spin_Retry_Count        0x0033   101   100   030    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       38
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       27
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       95
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       25 (Min/Max 21/46)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       0
222 Loaded_Hours            0x0032   100   100   000    Old_age   Always       -       5
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       177
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Hors ligne

#28 Le 18/12/2022, à 19:04

kalavera75

Re : [RESOLU] Disque dur externe impossible à monter

Est il possible de supprimer directement le Share au final qui contient 3 dossiers dont Nautilus avec quelques fichiers ou le Trash ?

https://zupimages.net/up/22/50/uf65.png


https://zupimages.net/up/22/50/k9ei.png

https://zupimages.net/up/22/50/cr5o.png


Modération - Pour montrer le contenu de dossiers, une simple commande et un retour en mode texte, c'est aussi efficace et bien plus léger

Dernière modification par cqfd93 (Le 18/12/2022, à 19:15)

Hors ligne

#29 Le 18/12/2022, à 19:06

geole

Re : [RESOLU] Disque dur externe impossible à monter

Ce disque est neuf ( 10 heures de fonctionnement ) et donc  en parfait état.
C'est peut-être le disque émetteur qui pose problème.


sudo  rm -rv /root/.local/share/trash

Dernière modification par geole (Le 18/12/2022, à 19:09)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

En ligne

#30 Le 18/12/2022, à 19:49

kalavera75

Re : [RESOLU] Disque dur externe impossible à monter

Compris pour le message du modérateur.

Merci geole, par contre tu m'a envoyé plusieurs fois la même commande, mais je viens de voir pourquoi cela ne fonctionnait pas mon  trash et ecrit Trash

j'ai modifié ça marche et c'est génial

Un grand merci pour ta patience et ton niveau à résoudre les problèmes, je vais analyser un peut les commandes pour mieux les utiliser.

big_smile

Hors ligne

#31 Le 18/12/2022, à 20:02

kalavera75

Re : [RESOLU] Disque dur externe impossible à monter

Le disque source plus vieux

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung SpinPoint M8U (USB)
Device Model:     ST1000LM025 HN-M101ABB
Serial Number:    E7003G941AYY3G
LU WWN Device Id: 0 000000 000000000
Firmware Version: 2BA30002
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun Dec 18 20:01:26 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(13440) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 224) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       1
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   090   090   025    Pre-fail  Always       -       3153
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2575
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       571
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       4
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1509
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       6
192 Power-Off_Retract_Count 0x0022   100   100   000    Old_age   Always       -       225
194 Temperature_Celsius     0x0002   064   064   000    Old_age   Always       -       22 (Min/Max 13/48)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       83
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       4
225 Load_Cycle_Count        0x0032   098   098   000    Old_age   Always       -       27891

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Mais ce ui fait default c'est que lors de la copie il ne copie pas certains fichiers aux noms peut-etre différent, à moins que cela soir un vrai probleme mais avec clone CD sur mac je n'avais pas ce soucis lors des copies. Peut etre existe t il un équivalent

Dernière modification par kalavera75 (Le 18/12/2022, à 20:04)

Hors ligne