Ubuntu-fr

Cywil 23

Souris 3Dconnexion SpaceNavigator et Onshape

Bonjour,

Je dispose d'une souris 3Dconnexion SpaceNavigator et elle fonctionne très bien sur FreeCAD.
J'aimerais aussi pouvoir l'utiliser pour Onshape, qui est un logiciel de CAO en ligne.
J'ai testé avec Firefox et Chromium et ça ne fonctionne pas sur les deux.

Quelqu'un a t-il déjà réussi ?

Merci d'avance pour votre retour !

xubu1957

Re : Souris 3Dconnexion SpaceNavigator et Onshape

Bonjour,

Onshape est mentionné dans cette discussion > github.com/FreeSpacenav/spacenavd/issues/30

Dernière modification par xubu1957 (Le 06/03/2023, à 20:05)

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Cywil 23

Re : Souris 3Dconnexion SpaceNavigator et Onshape

Ok merci :-)

Apparemment, c'est pas pour tout de suite...

Quelqu'un pourrait m'aider à installer le pilote propriétaire ?

Dans le fichier "InstallationInstructions_Linux.txt" :

INSTALLATION INSTRUCTIONS FOR 3DxWare FOR Linux (x86_64) - V 1.8.0
===============================================================================

To install the files for 3DxWare for Unix to the corresponding directories
and to run the driver you need root privileges.



Make sure you fulfill the following prerequisites:

	Linux:
		kernel 2.6.8 and higher

	NOTES: 

		For distributions with libXm.so.4 installed, please create a symbolic link
                to libXm.so.3 in the same directory.

                For Example:
                   cd /usr/lib64
                   ln -s libXm.so.4 libXm.so.3


		With SuSE Linux 10.x the usbfs is not mounted by default. 
		Please make sure you mount the usbfs to get support for the USB controller.
		To mount USBFS, please do (as root user):
			mount -t usbfs none /proc/bus/usb
		You should enter a line for usbfs in your /etc/fstab to have USBFS
		mounted at boot time.

		You might also find useful hints about USB on Linux here:
		http://www.linux-usb.org/USB-guide/c122.html
		http://www.linux-usb.org/USB-guide/x173.html

		In some cases some X11 fonts may not have been installed, which are used to
		draw on the device LCD.
		Please make sure you have installed the 75 and/or 100DPI fonts for X11.
		The packages are named for example:
			xorg-x11-fonts-75dpi-7.2-3.fc8,
			xorg-x11-fonts-100dpi-7.2-3.fc8
			or
			xorg-x11-fonts-ISO8859-1-100dpi-7.2-8.fc11.noarch,
			xorg-x11-fonts-ISO8859-1-75dpi-7.2-8.fc11.noarch

		Packages names may vary depending on the distribution (and version) you are using!


        Automatic startup in Red Hat EL 6:
        The service initialization in RHEL 6 has been changed from init (Sys V Init)
        to upstart.

        Related articles:
        https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Technical_Notes/deployment.html
        https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Migration_Planning_Guide/sect-Migration_Guide-Networking-Service_Initialization.html
       
        The installation determines the release version of Red Hat EL and installs for
        the appropriate service start procedure:
        RHEL release <= 5.x: System V Init (/etc/inittab)
        RHEL release = 6.x: upstart (/etc/init/3dxware.conf)


The files for the driver are provided with the following archive:

	Linux:
		3dxware-linux-v1-8-0.x86_64.tar.gz



Please save the file 3dxware-linux-v1-8-0.x86_64.tar.gz into the /tmp directory
and extract and run the script install-3dxunix.sh:

	tar xfz 3dxware-linux-v1-8-0.x86_64.tar.gz install-3dxunix.sh
	./install-3dxunix.sh

If you don't choose during installation the possibility to start the driver during login from the
/etc/inittab please make sure the driver is started before you launch your application.


For the USB devices start the driver with the following command:

	Linux:
		/etc/3DxWare/daemon/3dxsrv -d usb
	


For the serial devices start the driver with:

	/etc/3DxWare/daemon -d /dev/<serialport>
		where <serialport> is the name of your serial port to which the device is attached.
		Example: /etc/3DxWare/daemon/3dxsrv -d /dev/ttyS0


For the start of the driver from the /etc/inittab the following line is added:
	3dx:234:respawn:/etc/3DxWare/daemon/3dxsrv -d <port> </dev/null >/dev/null 2>&1
		where <port> is the name of the port to which the device is attached.



Demos:

	After unpacking 3dxware-linux-v1-8-0.x86_64.tar you can find two demos:
	The cube demo: /tmp/xcube and
	a value demo:  /tmp/xvalue
	
	Those are two simple demos that work with the setting "Any Application". You may copy the
	binaries to your favourite location for binaries.
	

Udev-Scripts:

    After unpacking 3dxware-linux-v1-5-0.i386.tar you can find two scripts:
    Start script "udev_3DxSrvStart": /tmp/udev_3DxSrvStart 
    Udev rule "85-3DX_SPP.rule" for SpacePilot PRO: /85-3DX_SPP.rule
    
    Put the rule file in "/etc/udev/rules.d/" and the start script into "/etc/3DxWare/daemon".
    These locations may vary depending on the distribution used and installation favours.
    Thus the rule file and the start scricpt may to be modified to refelct these indifidual environment.  


Known issues:
	- On Red Hat EL 5 the driver will not start from /etc/inittab if root logs in to :0
	
	- the driver has to run with root privileges(or started from the inittab)
	  Reason: Linux doesn't provide write access for standard users to USB devices
			  in /proc/bus/usb

	- SuSE 10.1 does not have the required USBFS activated/mounted per
	  default. Please get root permissions and mount the filesystem via:

	  mount -t usbfs none /proc/bus/usb

	  For permanent effect, edit the file /etc/fstab and change the line

	  usbfs		/proc/bus/usb	usbfs	noauto		0  0

	  to

	  usbfs		/proc/bus/usb	usbfs	defaults	0  0


	  You can find more informations on USBFS at the following pages:
	  http://www.linux-usb.org/USB-guide/x173.html
	  http://www.linux-usb.org/USB-guide/c122.html

    - Automatic startup in Red Hat EL 7:
      The starting mechanism on RHEL 7 has been changed to use systemd.
      Automatic startup on login is not implented.

      Related article:
      https://access.redhat.com/site/solutions/521533

      Starting 3dxsrv on the commandline is suggest as follows and my be applicable
      to systemd scripts as well:
      /etc/3DxWare/daemon/3dxsrv -d usb </dev/null >/dev/null 2>&1

Supported devices:
    SpaceMouse Pro Wireless
    SpaceMouse Wireless
    SpaceMouse Pro
    Space Pilot Pro
    Space Pilot
    Space Explorer (Serial, USB)
    Space Navigator for Notebooks
    Space Navigator

J'ai tenté la commande

tar xfz 3dxware-linux-v1-8-0.x86_64.tar.gz install-3dxunix.sh

Mais ça n'a pas fonctionné

cywil@cywil-GT70-2OC-2OD:~$ tar xfz 3dxware-linux-v1-8-0.x86_64.tar.gz install-3dxunix.sh
tar (child): 3dxware-linux-v1-8-0.x86_64.tar.gz : open impossible: Aucun fichier ou dossier de ce type
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now

Pourtant j'ai bien mis le fichier dans le dossier /tmp comme demandé...

Dernière modification par Cywil 23 (Le 06/03/2023, à 21:21)